Automotive Proceeding First Page

5-Day Proficiency Improvement Programme
on
Automotive
Engineering
at
ARAI, Pune
(The Automotive Research Association of India)
14th - 18th July 2014

(for Private Circulation & Training only)
Organized by
{2}
Index
1. Automotive Engineering................................................... 00
2. Automotive Testing & Certification................................... 00
3. Automotive Testing & Certification
International Type Approval Process................................. 00
4. I. C. Engine Design & Development................................... 00

5. Alternate Fuels................................................................. 00
6. Electric Vehicles and Test Procedures................................ 00
7. EMI/EMC Compliance....................................................... 00
8. Hybrid Vehicles................................................................. 00
9. Automotive Safety & Evaluation....................................... 00
10. Automotive NVH.............................................................. 00
11. Automotive Emission Legislation & Measurement............ 00
12. Emission Control & Aftertreatment Devices...................... 00
13. Automotive CAE............................................................... 00
{3}
ORGANISING COMMITTEE
Dr. K. C. Vora
Mr. V. N. Itkyal
Mr. Y. K. Upadhyay
Mr. R. M. Patil
Mrs. D. H. Morgaonkar
Mr. D. K. Prabhu
Mr. A. V. Jagtap
Mr. A. Y. Takhtar
Mr. D. B. Tope
Mr. M. R. Sarkale
Mr. Aniket Salunke
All ARAI Employees & Departments who contributed

for this programme.
{4}
ABOUT SPEAKERS
Mr. Rajendra Bandal : General Manager & Operational Head for Type Approval
& Engineering at TUV Rheinland (India) Pvt Ltd. He has more than 2 decades of
experience in automotive testing, standardization, laboratory management &
planning. He represented in various government committees for standardization
of Motor Vehicle Regulations, particularly in photometry, component & vehicles.
Email ID : [email protected]
Dr. A. K. Prakash : Specialist Engineer at Eaton, Pune. He has about 20+ years
of experience in the field of system optimization through plant modeling
and embedded control system development for automotive systems, both
conventional & hybrid vehicles and mission critical defense systems. It also
includes research and academics in robust controls development. He has done
Masters and PhD in Systems & Controls.
Mr. A. V. Mannikar : Sr. Dy. Director & Head of Safety & Homologation
Laboratory and Passive Safety Laboratory, ARAI, Pune. He has more than 25
years of experience in Automotive R&D mainly in Data Acquisition, Analysis &
System Evaluation for Safety & Reliability. He represents India on Passive Safety
at UNECE. He was responsible for building state of the art Bungee Sled Facility
at ARAI for evaluation of Seats & Safety Belts. He has keen interest in structure
for Injury Prevention, Anthropometry (Size India) & its influence in Safety and
Conflicts in Harmonization of Safety Standards.
Mr. N. V. Karanth : Sr. Dy. Director & Head of NVH & CAE Lab at ARAI, Pune.
He has vast experience of 30 years in the automotive field like evaluation
of automotive vehicles for ride comfort, vibration characterization, NVH
Improvements on various noise sources in automobiles, noise pollution
control. He along with NVH team have evaluated various class of automobiles
to provide NVH solutions using both experimental and CAE techniques.
Published and presented a number of papers in various conferences on subject
related to Design and Evaluation Automotive NVH, Ride comfort and Durability
Evaluation of Automotive vehicles. Responsible for the Genset Certification
for Noise, as ARAI being one of the Certification agency in India notified by
CPCB. Successfully completed a number of projects for multinationals OEMs,
Automotive, Non-Automotive, Building Acoustic Manufacturers and Genset
manufacturers providing end to end solutions. He is the member of Standing
Committee of NCNPC (National Committee for Noise Pollution Control and also
the Member Secretary of GRB India Working Group on Noise, WP.29 of UNECE).
Member of Project Evaluation Committee-Technology Development Board
(TDB), Department of Science and Technology (DST), Ministry of Science and
Technology Govt of India.
{5}
Dr. K. C. Vora : Sr. Dy. Director & Head of Academy at ARAI, Pune. He has his Ph.D.
from IIT-Bombay. He has a vast industrial & academic experience of 29 years and
has been associated with Walchand Nagar Industries, Emitec Emission Controls,
Mahindra & Mahindra and ARAI. He has specialized in the field of Automotive
Education, Technology Development Knowledge Management, Engine R&D
and Emission Controls. He was instrumental in starting ARAI Academy, which
conducts Graduate, Post Graduate and Doctoral Courses in Automotive
Engineering. He is the Advisor in various activities of SAEINDIA, under which
he conducts series of students activities like AWIM, BAJA & SUPRA SAEINDIA.
Email: [email protected]
Mr. H. A. Nakhawa : Dy. Director at Emission Certification Laboratory at ARAI,
Pune. He holds a Masters degree in Heat Power Mechanical Engineering from
University of Pune and has been working with ARAI for more than 30 years in
various capacities. He handled various functions like formulation of regulations
and their implementation, approval of emission facilities and consultancy,
certification and homologation, expansion and establishment of new centers
like RCN (i.e. iCAT) and centers coming up under NATRiP project. Recently, he
has established a unique facility for nano particle measurement and developed
competency to provide the services for export homologation and R&D purpose.
He works on BIS various technical committees and principle member from ARAI
on TED2 technical committee. He is India delegate member represents in GRPE
under WP29 with active participation in various subgroups like WLTP, EFV, EPPR,
WMTC, NRMM etc. in formulating new global technical regulations and UN
regulations under Geneva 1998 agreement.
Mr. A. A. Deshpande : Dy. Director & Head of Automotive Electronics Laboratory

at ARAI, Pune. He is responsible for evaluation of automotive electronic
embedded systems for EMI/EMC, environmental conditions, performance,
etc. He worked on development of first prototype of electronic engine
management system for passenger car and also on development of number of
test instrumentation development systems / software for automotive industry.
He led establishment of state-of-art EMI/EMC test facility and evaluation test
facility for automotive electronic systems at ARAI.
Dr. S. S. Thipse : Dy. Director at Powertrain Engineering at ARAI, Pune. He did

his Masters in Thermal Sciences from Bradley University, USA and Ph.D. from
New Jersey Institute of Technology in the field of Alternative Fuels Combustion.
Presently, he is at ARAI, working on the development of Hydrogen, CNG & LPG
engines at Powertrain Engineering Department. He is an active faculty at ARAI
Academy and serves as a core member in the expert committee on Alternative
fuels of DST as a nominee of Director, ARAI. He is a Governing Board member
of SAEINDIA Western Section, life member of Combustion Institute, ISTD and
member of ISO TC 22&BIS TED-26.
{6}
Mr. S. S. Ramdasi : General Manager at Powertrain Engineering at ARAI, Pune.

He has done Masters Degree in Mechanical Engineering In Design Discipline
also he has completed Master of Management Science in Management
Information Systems. Currently, he is doing Ph.D. from VIT University. He has
R&D experience over 20 years in ARAI, Pune. Presently, he is looking after engine
design centre at PTE, ARAI and responsible for execution of various projects in
design & development of engines, components & systems for meeting various
emission norms, strength, durability and structural dynamics requirements. He
has 2 patents on LPG fuel metering system and Gas air mixer for stationary
application engines.
Email ID: [email protected]
Mr. R. S. Mahajan : Dy. General Manager at Computer Aided Engineering
Laboratory at ARAI, Pune. His domain expertise includes CAE, Crash/Impact/
Drop analysis of automotive structures especially rollover of buses - and their
validation, linear, non-linear, contact, thermal, fatigue analysis of automotive
components etc. He has successfully executed number of developmental
projects in automotive as well as non-automotive fields using CAE analysis
software like HYPERWORKS, LS-DYNA, ABAQUS, NASTRAN, ANSYS and FE
Fatigue etc. He was also involved in developing CAE (software and hardware)
facilities and Drop test facility at ARAI. He has published and presented several
papers in national / international forums.
Dr. S. A. Patil : Dy. General Manager & Head of Learning Center at Academy of
ARAI, Pune. He has his Ph.D. from University of Texas at Dallas. He has academic
and research experience of 16 years in the varied domain of speech under stress,
speaker variability under stress, adult-child interaction for language learning,
non-linear modeling of speech and driver distraction modeling. Recently, he is
in-charge of the academic activities at ARAI Academy.
Email : [email protected]
Mr. M. M. Desai : Dy. General Manager at Automotive Electronics Laboratory,

ARAI, Pune. Presently he is responsible for Evaluation, Testing of Automotive
Electronics (EMI/EMC) and Certification, testing of Electric and Hybrid Electric
Vehicles. He is working with ARAI for last 12 years.
Mr. Mohammad Rafiq B. Agrewale : Dy. Manager at ARAI Academy, Pune. He

has done Masters Degree in Mechanical Engineering In Thermal Discipline
and Bachelors Degree in Automobile Engineering. His area of specialization is
Automotive Testing & Certification, Automotive Engineering Systems and CFD.
Email ID: [email protected]
{7}
Schedule for 5 Day Proficiency Improvement Programme on
Automotive Engineering
Certificate Course
Day One: 14th July 2014

Start End
Subject
Lead

Duration
in Min
08.30
09.30 Registration
60
09.30
10.00 Inauguration & Welcome Address
30
10.00
11.00 Automotive Engineering
60
11.00
11.15 Tea Break
15
11.15
13.00 Automotive Engineering(Contd.)
105
13.00
14.00 Lunch
14.00
15.15 Automotive Testing & Certification
15.15
15.30 Tea Break
15.30
17.00 Automotive Testing & Certification
Dr S. A. Patil
Dr S. A. Patil
60
Mr. Mohammad Rafiq B. Agrewale 75
International Type Approval Process
15
Mr. Rajendra Bandal
90
Mr. S. S. Ramdasi
120
Day Two: 15th July 2014

09.00
11.00 I. C. Engine Design & Development
11.00
11.15 Tea Break
15
11.15
13.00 I. C. Engine Design & Development (Contd.)
105
13.00
14.00 Lunch
60
14.00
16.00 Alternate Fuels
120
16.00
16.15 Tea Break
15
16.15
17.00 Alternate Fuels (Contd.)
45
Mr. S. S. Ramdasi
Dr. S. S. Thipse
Dr. S. S. Thipse
{8}
Day Three: 16th July 2014

Start End
Subject
Lead

Mr. M.M.Desai
Duration
in Min
09.00
11.00 Electric Vehicles and Test Procedures
11.00
11.15 Tea Break
15
11.15
13.00 EMI/EMC Compliance
105
13.00
14.00 Lunch
60
14.00
16.00 Hybrid Vehicles
120
16.00
16.15 Tea Break
15
16.15
17.00 Hybrid Vehicles (Contd.)
Dr. A K Prakash
45
Mr. A. V. Mannikar
120
Mr. A. A. Deshpande
Dr. A K Prakash
120
Day Four : 17th July 2014

09.00
11.00 Automotive Safety & Evaluation
11.00
11.15 Tea Break
15
11.15
13.00 Automotive NVH
105
13.00
14.00 Lunch
60
14.00
16.00 Automotive Emission Legislation & Measurement
120
16.00
16.15 Tea Break
15
16.15
17.00 Automotive Emission Legislation &
Mr. H. A. Nakhawa
45
Dr. K. C. Vora
120
Mr. N. V. Karanth
Mr. H. A. Nakhawa
Measurement (Contd.)
Day Five : 18th July 2014

09.00
11.00 Emission Control & Aftertreatment Devices
11.00
11.15 Tea Break
15
11.15
12.00 Emission Control & Aftertreatment Devices (Contd.)
Dr. K. C. Vora
45
12.00
13.00 Automotive CAE
Mr. R. S. Mahajan
60
13.00
14.00 Lunch
60
14.00
15.00 Automotive CAE (Contd.)
60
15.00
15.30 Written Test
30
15.30
16.30 Summary, Discussions and Feedback
60
16.30
17.00 Valedictory Function
30
Mr. R. S. Mahajan
{9}
5-Day Proficiency Improvement Programme on Automotive Engineering
{ 10 }

Automotive Proceeding First Page

Uploaded by

Copyright:

Available Formats

Automotive Proceeding First Page

Uploaded by

Document Information

Original Description:

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Automotive Proceeding First Page

Uploaded by

Copyright:

Available Formats

5-Day Proficiency Improvement Programme

(The Automotive Research Association of India)

14th - 18th July 2014

International Type Approval Process................................. 00

4. I. C. Engine Design & Development................................... 00

Mr. Aniket Salunke

All ARAI Employees & Departments who contributed

Mr. A. A. Deshpande : Dy. Director & Head of Automotive Electronics Laboratory

Dr. S. S. Thipse : Dy. Director at Powertrain Engineering at ARAI, Pune. He did

Mr. S. S. Ramdasi : General Manager at Powertrain Engineering at ARAI, Pune.

Mr. M. M. Desai : Dy. General Manager at Automotive Electronics Laboratory,

Mr. Mohammad Rafiq B. Agrewale : Dy. Manager at ARAI Academy, Pune. He

Schedule for 5 Day Proficiency Improvement Programme on

Day One: 14th July 2014

10.00 Inauguration & Welcome Address

11.00 Automotive Engineering

11.15 Tea Break

13.00 Automotive Engineering(Contd.)

15.15 Automotive Testing & Certification

15.30 Tea Break

17.00 Automotive Testing & Certification

Mr. Mohammad Rafiq B. Agrewale 75

International Type Approval Process

Mr. Rajendra Bandal

Day Two: 15th July 2014

11.00 I. C. Engine Design & Development

11.15 Tea Break

13.00 I. C. Engine Design & Development (Contd.)

16.00 Alternate Fuels

16.15 Tea Break

17.00 Alternate Fuels (Contd.)

Day Three: 16th July 2014

11.00 Electric Vehicles and Test Procedures

11.15 Tea Break

13.00 EMI/EMC Compliance

16.00 Hybrid Vehicles

16.15 Tea Break

17.00 Hybrid Vehicles (Contd.)

Day Four : 17th July 2014

11.00 Automotive Safety & Evaluation

11.15 Tea Break

13.00 Automotive NVH

16.00 Automotive Emission Legislation & Measurement

16.15 Tea Break

17.00 Automotive Emission Legislation &

Day Five : 18th July 2014

11.00 Emission Control & Aftertreatment Devices

11.15 Tea Break

12.00 Emission Control & Aftertreatment Devices (Contd.)

13.00 Automotive CAE

15.00 Automotive CAE (Contd.)

15.30 Written Test

16.30 Summary, Discussions and Feedback

17.00 Valedictory Function

5-Day Proficiency Improvement Programme on Automotive Engineering

You might also like