CDVI Catalogue Q4 2014 Web Eng

Download as pdf or txt
Download as pdf or txt
You are on page 1of 24
At a glance
Powered by AI
The document discusses CDVI's Atrium 3.0 web-based access control system, including its hardware components, additional features like email notifications and camera integration, and how multiple controllers can be connected to scale up to 100 doors.

The new system hardware architecture consists of 10 AC22 IP controllers and 40 AX22 expansion modules (4 modules per controller) to control up to 100 doors.

Additional benefits mentioned include email notifications of events, integration with IP cameras to view doors in real-time, and integration with intrusion detection systems through card access.

2 0 1 4

Web-Based Access Control System


Integrated Access Control System
Stand-Alone Access Control System
Card Readers & Keypads
Proximity Cards and Badges
Wireless Products
Biometric Fingerprint Readers
Request-to-Exit Devices
Electromagnetc Locks
Infrared Photocells
Automatc Door Operator
Product Catalogue
The Installers Choice
cdvi.ca
2
@
The Installers Choice
Simplicity is Growing
WEB-BASED ACCESS CONTROL SYSTEM
ATRIUM 3.0 version controls up to 100 doors with the same ease you have come to expect from CDVI.
The new system hardware architecture consists of the following:

10 x AC22 IP controllers
40 x AX22 expansion modules
(4 expansion modules per AC22 controller, via RS485 bus)
(see diagram on page 3)
ADDITIONAL BENEFITS:

Email Notfcaton:
ATRIUM can automatcally send an e-mail based on events,
reinforcing your sites security.


Camera Integraton:
IP cameras can be added to the ATRIUM system. View whats
happening at the door in real-tme in ATRIUMs web interface.


Intrusion Integraton:
Double-swipe a valid card at an ATRIUM reader to arm/
disarm an intrusion detecton system. The intrusion
detecton system must support key switch arming.


Increased ATRIUM capacites:

10,000 Users & Cards
25,000 Event Bufer (per controller)
1000 Access Levels
250 Schedules
Installer's
Choice
YEAR WARRANTY
3
cdvi.ca
LAN/WAN
# 1 # 10
Up to 100-Door Access Control System
WEB-BASED ACCESS CONTROL SYSTEM
EXPANDER NETWORK:
Up to 1220 m (4000 ft)
from the controller.
Combination of Star and/or
Daisy Chain confguration
CONTROLLER NETWORK:
Up to 100 m (328 ft)
from the Ethernet switch.
According to the ANSI/TIA/EIA
standard for category 5e cable
AX22
2-door/2-reader
expander
AX22
2-door/2-reader
expander
AX22
2-door/2-reader
expander
AX22
2-door/2-reader
expander
AC22
2-door/2-reader
controller
AX22
2-door/2-reader
expander
AX22
2-door/2-reader
expander
AX22
2-door/2-reader
expander
AX22
2-door/2-reader
expander
AC22
2-door/2-reader
controller
ETHERNET SWITCH
WiFi
Tablet
Smart Phone
Add up to ten AC22 per site
for a maximum of 100 doors
(Need software and
frmware 3.0 version)
4
The Installers Choice
Performance
Merging with Simplicity
Can manage up to 10 doors
(2 on-board and 8 using four 2-door expansion modules, AX22)
On-board Embedded Web Server (AES encrypton)
Pre-assembled universal power supply (120V / 240V)
Auto-detect hardware modules
Quick and easy card enrollment procedure
Totally fuseless system
Ant-Passback (Sof, Hard & Timed)
Interlock (Mantrap)
1000 Access Levels
250 Schedules each supportng 100 tme periods
10 Areas
Ultra fast frmware update (less than 10 seconds)
FREE Management Sofware
Maintenance-friendly snap on terminal connectors
Comprehensive LED status indicators
AC22
Web Based IP Controller
WEB-BASED ACCESS CONTROL SYSTEM
Input Specifcatons
Reader Inputs/Ports: 2
Mult-purpose inputs: 10 (20 using zone doubling)
Output Specifcatons
Lock outputs: 2 (750mA @ 12Vdc)
Relay Outputs: 2 Form C relays (Dry Contact) 5A @ 250Vac,
7A @ 125Vac, 7A @ 30Vdc
Electrical Specifcatons
Power input: 85Vac to 264Vac, 50/60Hz
Supply Current: 3.3A switching power supply
Batery backup: One 12Vdc, 4.5Ah or 7Ah, gel type batery
Communicaton
On-board Ethernet, RS-485 Bus expansion bus
Size
Cabinet size: 40 cm (H) x 32 cm (W) x 9 cm (D)
15.7 (H) x 12.6 (W) x 3.6 (D)
PCB dimensions: 19.9cm (7.83) x 18 cm (7.09)
Environment: -22C to 50C (-4F to 122F)
On-board Protecton
Auxiliary outputs: 1A (12Vdc) Fuseless protecton
The AC22 is a powerful Web-Based IP controller that can
manage up to 10 doors (2 on-board and 8 using four 2-door
expansion modules, AX22). Ten AC22 controller can be add to
a site for a maximum of 100 doors per site. The AC22 includes
an embedded web server that combines performance and
simplicity enabling you to manage Users/Cards, lock or unlock
doors, view system events and display controller informaton
from any place in the world! Industry-unique and efortless
card enrollment mode minimizes system start up and
simplifes your life.
Installer's
Choice
YEAR WARRANTY
Main Features
NEW Door Capacity 100
Embedded Web Server (IP)
Pre-assembled Universal Power Supply
(No Transformer Required)

Auto-detect modules (No DIP Switch)
FREE Software
Auto-Resume Fuseless Technology
(AC22 & AX22)

NEW Users / Cards 10,000
NEW Event Buffer 25,000
NEW Access Levels 1,000
NEW Schedules 250
5
cdvi.ca
+
-
1K Ohm
2.2K Ohm
GND
A+
B-
+
-
A
B
C
A
B
C
+
+
+
-
-
-
WEB-BASED ACCESS CONTROL SYSTEM
Inputs
(10 onboard zone inputs, 20 with zone doubling)
Door Locks
(2 door locks, 750mA @ 12Vdc output)
N.C. Door Contact
N.C. Door Contact
Input 1
N.C. Door Contact N.C. REX
N.C. REX
Input 11
N.C. REX
The expander module Local Bus supports an overall distance of 1220m (4000 f.).
Daisy chain, star or Y confguratons (or a combinaton of these) are supported.
To Z1
To GND
AX22
2-Door Expander
AX22
2-Door Expander
AX22
2-Door Expander
AX22
2-Door Expander
Expander Module Local Bus (RS485)
D
o
o
r

1
L
o
c
k

1
(
F
a
c
t
o
r
y

D
e
f
a
u
l
t

S
e
t
t
i
n
g
s
)
L
o
c
k

2
D
o
o
r

2
F
a
c
t
o
r
y

D
e
f
a
u
l
t

I
n
p
u
t

S
e
t
t
i
n
g
s
Jumper Settings
(De-energized)
Jumper Settings
(Energized)
Ethernet Port
(10/100 Mbps)
with AES 256-bit
encryption
Optional
Zone Doubling
Input Settings
To LA1 To LA2
To LB1 To LB2
Z1 (Input 1)
Z6 (Input 6)
Z2 (Input 2)
Z7 (Input 7)
GND
GND
GND
GND
AC22
Wiring Diagram
Readers
Alarm Sounder
Bell Output - 12Vdc @ 3A (40 watts)
Tamper Switch
(N.C. Contact)
Door
Cabinet
Tamper Switch
Wall
Tamper
Switch
Reader 2
NANOPB
Mini Proximity Reader
Reader 1
NANOPB
Mini Proximity Reader
Power Supply
(Pre-Assembled in Metal Cabinet)
Battery
12V, 7AH
Power Supply
LED Indicator
AC Plug
Fuse and terminals
80 wat Power Supply
12V / Red
12V / Red
GND / Black
GND / Black
D0 / Green
D0 / Green
D1 / White
D1 / White
R2 / Orange
R1 / Orange
G2 / Yellow
G1 / Yellow
B2 / Brown
B1 / Brown
6
The Installers Choice
Performance
Merging with Simplicity
ATRIUM KITS
AX22
2-Door Expander
Control 2 doors / 2 readers
Auto-detect technology
1220m (4000f) 4 conductor RS-485 expansion bus
(No jumpers or DIP switches)
Field-selectable lock outputs: 2 Form C relays (Dry Contact) 5A
@ 250Vac, 7A @ 125Vac, 7A @ 30Vdc
Wiegand & ABA Track II magnetc stripe compatble
10 Inputs (20 using zone doubling technology)
Comprehensive LED status indicators
Cabinet dimensions: 29 cm (11.4) height x
28 cm (11) wide x 8 cm (3.15) deep
Add up to four AX22 door expanders per AC22 main controllers to increase the capacity to 10 doors. Locate the AX22
anywhere on the 1220m (4000f) 4 conductor RS485 communicaton bus. The efortless auto-detect technology identfes the
AX22 on the communicaton bus. A pre-assembled universal power supply is included with every AX22 making this unit an
industry leader in efciency and simplicity.
AC22KITB
2-Door Master Kit
AX22KITB
2-Door Expander Kit
1 x AC22
2 x NANOPB (black proximity readers)
1 x CARDKIT (5 x CS, 5 x BTAG & 5 x DISCTAG)
1 x AX22
2 x NANOPB (black proximity readers)
1 x CARDKIT (5 x CS, 5 x BTAG & 5 x DISCTAG)
WEB-BASED ACCESS CONTROL SYSTEM
Installer's
Choice
Installer's
Choice
YEAR WARRANTY
7
cdvi.ca
INTEGRATED ACCESS CONTROL
*
FREE from our web site, www.cdvi.ca (Security dongle NOT required)
STARTER
PACK
*
(FREE)
LITE STANDARD PROFESSIONAL ENTERPRISE GLOBAL
Sites 1 1 64 64 64 64
Serial Ports 4 1 1 1 4 4
Dial Up connection
TCP/IP connection
Cards (per site) 512 512 2,048 8,196 16,384 16,384
Controllers (per site) 1 16 32 64 256 256
Doors (per site) 8 16 128 512 2048 2048
Elevator Control -
Elevator Cabs (per site) 2 - 64 128 512 512
Floors per cab 64 - 64 64 64 64
Floor groups (per site) 128 - 128 128 128 128
Include built-in Integration -
Global Communication - - - - -
Global User Groups - - - - - 2048
Global Access Levels - - - - - 256
Global Schedules - - - - - 256
Additional Workstation License - - - 1 1 1
CENTAUR GLOBAL Mult-Site Management Sofware
CENTAUR GLOBAL editon sofware is for customers having to manage multple sites at the same tme. Now, it is possible to have a centralized
server that communicates simultaneously between sites to achieve globally your usual tasks. You can view events/alarms/door status, lock/
unlock doors, add/ delete/edit users and cards in real tme on several sites at once. GLOBAL editon includes all doors, cards and users of each
site on the same server. Through global access levels and schedules, you save tme when you add a user by confguring it once.
INTEGRATED ACCESS CONTROL SYSTEM
Software Editions
8
The Installers Choice
Parking Management
Centaur Parking Management provides
a parking actvity monitor. Quickly view
how many parking spaces are used,
by which user and how many parking
spaces are available. Manually allocate
or free parking spaces. Actvate a
PARKING FULL sign when parking
capacity is reached. Finally, generate
reports on parking usage and actvites.
Visitor Management
Centaurs Visitor Module can monitor
and record all visitors coming to
your premises. Preserves a complete
record of all visitor actvites and
keeps each visitors informaton for
subsequent visits. Centaurs Visitor
Module will securely validate the
comings and goings of all visitors.
Guard Tour Integraton
Live interactve guard tour allows
check point validaton using card
readers, input points (Moton sensors,
key switches, or push butons) or data
collectors (PulseStar Data Collecton
System by Videx). Includes live alarms
for tme violatons and intuitve
excepton reports.
SAP Integraton
Centaur will parse (every 5 minutes)
the content of SAP fle. It will add,
modify or delete a user from the
Centaur DB, depending on the acton.
It is also possible to add, modify and
delete cards through this mechanism.
You can also set a default access level
for the cards/users imported.
Pro-Report:
On demand, scheduled or customized reports
FrontView: Live interactve foor plans
FrontGuard: Display real-tme visual authentcaton
FrontDesk:
Add, delete, modify & print cards, include Photo-ID
Locator:
Monitor real-tme locaton of each card holder
WavePlayer: Play a sound on any system event
INTEGRATIONS INCLUDED
IN ALL CENTAUR SOFTWARE
Asset Management
Why buy something that you already
have? Keep track of your assets and
save tme and money. Quickly fnd
who is in possession of your assets.
INTEGRATED ACCESS CONTROL SYSTEM
DVR Integraton
Centaur DVR integraton can associate a specifc access
control event with a video recording and lets you playback
up to 60 seconds before and afer that event. It also lets
you capture a video image (frame) during the playback or
live camera viewing in jpeg format.
9
cdvi.ca
Control 2 doors/readers per CT-V900-A
(up to 8 using three CA-A470-A 2-door expander modules)
On-board card database
256 Schedules
256 Access Levels
2048 Event Bufer
Fully distributed database architecture
(access decisions made locally)
Upgradable frmware - Upload frmware via the computer
E-Bus technology: expander modules can be up to 1220m
(4000f) from the CT-V900-A
Supports most common Wiegand formats, magnetc Stripe
Track II ABA and 9 keypad formats, including BCD
Easy maintenance with snap-of terminal blocks
Lithium batery protecton in case of complete power failure
Comprehensive LED status indicators
CT-V900-A
2-Door Controller
The CT-V900-A is at the heart of every Centaur access control
system. The Centaur Server, hardware expander modules,
mult-purpose inputs, card readers, keypads and outputs
are connected directly to the CT-V900-A. Mult-controller
systems are joined together via the RS-485 communicaton
bus. Distributed database architecture allows each controller
to make split-second decisions without the need of the
server computer. Lightning-quick, robust and remarkable
stability make the CT-V900-A the professionals choice.
Output Specifcatons:
Lock outputs: 2 feld-selectable (12 or 24Vdc)
Relay Outputs: 2 Form C Dry Contact 5A/28Vdc
Reader Outputs: Six 50mA Open collector outputs
(Red/Green LEDs, Buzzer)
Input Specifcatons:
Reader Inputs/Ports: 2
Keypad Inputs/Ports: 2
Mult-purpose Inputs: 16 (using ATZ 2R/3R)
Physical Specifcatons:
Cabinet size: 39cm (H) x 33cm (W) x 10cm (D)
15.5 (H) x 13 (W) x 4 (D)
PCB dimensions: 24.5cm (9.65) x 20.2cm (7.95)
Environment: 5C to 55C (41F to 133F)
Electrical Specifcatons:
Power input: 24Vac, 75VA or higher, 50/60Hz
Supply current: 2.5A switching power supply maximum
Batery backup: Two 12Vdc, 7Ah, gel cell bateries
Communicaton:
RS485 communicaton between controller, expander and all
modules. RS-485, TCP/IP, RS-232 or modem for communicaton
between frst controller of a site and server.
On-board Protecton:
Auxiliary outputs: 2.5A (24Vdc), 1A (12Vdc & 5Vdc)
fuseless protecton
AC protecton: 5A fuse
Batery reversal: 7A fuse
INTEGRATED ACCESS CONTROL SYSTEM
INTEGRATED ACCESS CONTROL
Can supply up to 1 x CT-V900-A (24Vac)
and up to 3 x CA-A470-A (16Vac)
Secondary voltage: 16Vac (75VA) &
24Vac (75VA)
Primary voltage: 120V, 60Hz
(Fuse protected)
Weight: 7 Lbs (3.2 Kg)
Available in 200VA: CDVI 200
16Vac (100VA) & 24Vac (100VA)
CDVI150
150VA Transformer
10
The Installers Choice
Reduce feld-wiring costs by running only one cable to the
CT-V900-A. Reader, Keypad, Door Contact, REX device and
Reader Outputs can be connected locally to the CA-A470-A
by installing the expander module close to the doors.
CA-A470-A
2-Door Expander Module
Control 2 readers and/or keypads
Up to three CA-A470-A modules per CT-V900-A
2 form C relays 15A/28Vdc, N.C./N.O. lock outputs
4 Inputs (door contacts and REX devices)
6 open collector, 50mA Sink, reader outputs
E-Bus connectvity to the CT-V900-A up to 1220m (4000f)
Supports most common Wiegand formats, Magnetc Stripe Track
II ABA, BCD keypad formats
Comprehensive LED status indicators
INTEGRATED ACCESS CONTROL SYSTEM
INTEGRATED ACCESS CONTROL
CA-A360-A
RS-232 to RS-485 Converter
CA-A360-USB CAB
RS-232 and/or USB to RS-485 Converter
The CA-A360-A and CA-A360-USB converters, installed between the Centaur Server and the CT-V900-A controllers, allow a
daisy-chain confguraton thus extending the total connecton distance to 1220m (4000f). The LEDs provide easy and visual
identfcaton of the modules Power and communicaton status.
Converts RS-232 or USB to
RS-485 protocol
Work with UTP cable (Cat 5)
Power Requirements: 12Vdc or via
USB power
Current consumpton: 100mA
Operatng temp:
-10C to 55C (14F to 131F)
Converts RS-232 to RS-485 protocol
Work with UTP cable (Cat 5)
Power Requirements: 12Vdc
Current consumpton: 100mA
Operatng temp:
-10C to 55C (14F to 131F)
Minimize feld wiring costs by using existng LAN/WAN networks. We have the soluton at a very aggressive price. This unit
enables RS-232 serial devices such as the CT-V900-A to communicate over a LAN/WAN network.
CA-ETHR-A
TCP/IP RS-232 Converter
Converts TCP/IP protocol to RS-232
Simple programming & setup
Statc IP Addressing
RJ-45 connecton to the LAN
LED status indicators
RS-232 serial connector supplied
Supports TCP/IP, HTTP, ICMP and ARP
protocols
Ethernet Compatbility:
Version 2.0/IEEE 802.3
10 MBPS Half Duplex
9600, 19200 and 38400 baud rates
Serial format:
8 data bits, 1 Stop bit, No Parity
PCB Dimensions:
10cm x 6.4cm (4in x 2.5in)
11
cdvi.ca
CA-A370-P
RS-485 Network Hub
Provides a higher network isolaton
from noise
Create 4 independent RS-485
networks from 1 RS-485 network
Connect controllers or expander
modules up to 1220m (4000f) from
the hub
Power Requirements: 12 Vdc
Current consumpton: 190 mA
Operatng temp: -10C to 55C
(14F to 131F)
INTEGRATED ACCESS CONTROL SYSTEM
CA-A460-P
Relay Expander Module
Adds 7 form C relay outputs
(5A/28Vdc) to the CT-V900-A
controller
Up to 2 CA-A460-P modules per
CT-V900-A controller
E-Bus connectvity to the CT-V900-A
up to 1220m (4000f)
Power Requirements: 12Vdc
Current consumpton: 50mA
(typical), 400mA (maximum)
CK-TRAK-L
Tracker LCD Display
Adjustable backlight and contrast
Display unit for tme and atendance
32-character LCD display
(2 lines 16 characters each)
Can be used with Ant-passback
applicatons to display user locatons
Power Requirements: 9 to 16Vdc
E-Bus connectvity to the CT-V900-A
up to 1220m (4000f)
LCD: Super Twisted Nematc display
(STN) Wide viewing angle
Up to 8 CK-TRAK-L modules per
CT-V900-A controller
CA-A480-A
Elevator Controller
CA-A110-P
Lock Control Module
CA-A482-P
Destnaton Reportng Module
16 Form C foor control relays
(15A/28Vdc, N.C./N.O.)
1 Fire control input + 1 Tamper input
Control up to 64 foors and
2 elevator cabs
Destnaton reportng
(requires CA-A482-P)
E-Bus connectvity to the CT-V900-A
up to 1220m (4000f)
Backup batery with selectable
batery charge current
On-board 12Vdc power supply
Fully supervised (tamper, low batery
and AC failure) with LED display
Up to 8 CA-A480-A controller per
CT-V900-A controller
Connects directly onto the
CA-A480-A elevator controller
User must present a valid card to
select a foor buton.
16 foor-selecton inputs and
LED indicators
Records Valid and Invalid
foor selectons
Power input: 5Vdc
Current consumpton: 28mA
(typical), 108mA (max)
DC input actvaton: 15Vdc
(minimum), 165Vdc (max)
Simplifes the installaton of
dual-locking doors
(2 mag locks or combinaton of a
mag lock and a door strike)
Lock outputs: 2 form C relays rated
at 5A/12Vdc, N.C./N.O.
2 relay status LEDs
Connects directly to the CT-V900-A
lock output terminals
Current consumpton: 100mA
12
The Installers Choice
LCD Display
CK-TRAK-L
(Max. 8 per CT-V900-A)
Elevator Controller
CA-A480-A
(Max. 8 per CT-V900-A)
Relay
Expander Module
CA-A460-P
(Max. 2 per CT-V900-A)
2-Door
Expander Module
CA-A470-A
(Max. 3 per CT-V900-A)
Controller to Server Communication
CENTAUR
Server
To other CT-V900-A controllers
E-bus Network Module Capacity
To PC Centaur Server
See diagram above
Furthest modules can
be up to 1220m (4000f)
away from the CT-V900-A
Furthest controller can be up to 1220m
(4000f) away from frst CT-V900-A
CT-V900-A
First controller
of a site
INTEGRATED ACCESS CONTROL SYSTEM
DB9 to
CTV900A Serial port
To
CTV900A RS485 Bus
DB9 femal to
CTV900A (Serial)
USB cable to
CENTAUR Server PC USB port
DB9 femal to
CENTAUR Server PC Serial port
To LAN/WAN to
CENTAUR Server PC Ethernet port
Up to 8M (25ft)
Up to 1220M (4000ft) Up to 8M (25ft)
Up to 90M (300ft)
CA-ETHR-A
TCP/IP Converter
CA-A360-USB CAB
USB to RS485 Converter
DB9FF10
Femal/Femal DB9 10 M (25ft) Cable
1. TCP/IP Connection
2. USB/RS485 Connection
3. Serial Connection
13
cdvi.ca
2DMK
2-Door Master Kit (serial communicaton)
2DEKIT
2-Door Master Kit (IP communicaton)
2DMKUSB
2-Door Master Kit (USB communicaton)
2DMKIP
2-Door Master Kit (IP communicaton)
1 x CT-V900-A with metal box
2 x DGLP FN WLC26 proximity readers
1 x CENTAUR Lite Editon sofware (16 Doors)
1 x CA-A360-USB CAB USB/RS-485 Converter
1 x CDVI150 Transformer
(Can supply 1 x CT-V900-A and 3 x CA-A470-A)
1 x CT-V900-A with metal box
2 x DGLP FN WLC26 proximity readers
1 x CENTAUR Lite Editon sofware (16 Doors)
1 x DB9FF10 Female-Female DB9 10 meter cable
1 x CDVI150 Transformer
(Can supply 1 x CT-V900-A and 3 x CA-A470-A)
1 x CA-A470-A with metal box
2 x DGLP FN WLC26 proximity readers
1 x CT-V900-A with metal box
2 x DGLP FN WLC26 proximity readers
1 x CENTAUR Lite Editon sofware (16 Doors)
1 x CA-ETHR-A IP Converter
1 x CDVI150 Transformer
(Can supply 1 x CT-V900-A and 3 x CA-A470-A)
INTEGRATED ACCESS CONTROL SYSTEM
INTEGRATED ACCESS CONTROL
KITS
14
The Installers Choice
Reads CDVI Wiegand
26-bit card encoding
10 cm (4 in) read range
Illuminated card reader
(Blue, green and red).
Audible feedback
PCB sealed in epoxy
Operatng temp.: -30C to 60C
(-22F to 140F)
Power requirements: 12Vdc
Reads CDVI and most popular
26-bit Wiegand card encoding
10 cm (4 in) read range
Illuminated card reader
(Blue, green and red).
Audible feedback
PCB sealed in epoxy
Operatng temp.: -30C to 60C
(-22F to 140F)
Power requirements: 12Vdc
Touch sensitve keypad
Keypad code of 4 to 8 digits
Reads CDVI and most popular
26-bit Wiegand card encoding
10 cm (4 in) read range
Audible feedback
PCB sealed in epoxy
Operatng temp.: -30C to 60C
(-22F to 140F)
Power requirements: 12Vdc
Reads CDVI Wiegand
26-bit card encoding
10 cm (4 in) read range
Illuminated card reader
(Blue, green and red).
Audible feedback
PCB sealed in epoxy
Operatng temp.: -30C to 60C
(-22F to 140F)
Power requirements: 12Vdc
NANOPB
Mini Wiegand Proximity Reader
SOLARPB
Mult-Technology Proximity Reader
SOLARKPB
Keypad & Mult-Technology Reader
NANOPW
Mini Wiegand Proximity Reader
Reads CDVI and most popular
26-bit Wiegand card encoding
10 cm (4 in) read range
Illuminated card reader
(Blue, green and red).
Audible feedback
PCB sealed in epoxy
Operatng temp.: -30C to 60C
(-22F to 140F)
Power requirements: 12Vdc
STARPB
Mullion Proximity Reader
Reads CDVI and most popular
26-bit Wiegand card encoding
10 cm (4 in) read range
Illuminated card reader
(Blue, green and red).
Audible feedback
PCB sealed in epoxy
Operatng temp.: -30C to 60C
(-22F to 140F)
Power requirements: 12Vdc
STARPW
Mullion Proximity Reader
Reads CDVI and most popular
26-bit Wiegand card encoding
10 cm (4 in) read range
Illuminated card reader
(Blue, green and red).
Audible feedback
PCB sealed in epoxy
Operatng temp.: -30C to 60C
(-22F to 140F)
Power requirements: 12Vdc
Touch sensitve keypad
Keypad code of 4 to 8 digits
Reads CDVI and most popular
26-bit Wiegand card encoding
10 cm (4 in) read range
Audible feedback
PCB sealed in epoxy
Operatng temp.: -30C to 60C
(-22F to 140F)
Power requirements: 12Vdc
SOLARPW
Mult-Technology Proximity Reader
SOLARKPW
Keypad & Mult-Technology Reader
CARD READERS & KEYPADS
15
cdvi.ca
DGLI F WLC26
DGLI WLC26
DGLP FN WLC26
DGLP WLC26
Heavy-duty ZAMAK cast alloy
(Zinc, Aluminium, Magnesium and
Copper)
Eye-catching bright blue back-
lightng
Poted electronics
Integrated Piezo/Buzzer
Power requirements: 12Vdc
GALEO/W
26-Bit Wiegand Back-Lit Keypad
Stainless Steel constructon
26-Bit Wiegand output
Call buton
Poted Electronics
Integrated Piezo/Buzzer
Power requirements: 12Vdc
KCP/BP/26W
26-Bit Wiegand Keypad
Rugged polycarbonate
26-bit format Wiegand output,
Compatble with CDVI, Centaur
(Positon Technology) and most
26-bit format cards.
Up to 8cm (3.5 in) read range
Poted electronics
Red/Green LEDs and Buzzer
Power requirements: 12Vdc
Rugged polycarbonate
26-bit format Wiegand output
Up to 8cm (3.5 in) read range
Poted electronics
Red/Green LEDs and Buzzer
Power requirements: 12Vdc
Stainless steel proximity reader
Dust/Weather/Vandal resistant
26-bit format Wiegand output,
Compatble with CDVI, Centaur
(Positon Technology) and most
26-bit format cards.
Up to 8cm (3.5 in) read range
Poted electronics
Red/Green LEDs and Buzzer
Power requirements: 12Vdc
DGLP WLC26 AND DGLP FN WLC26
Mult-Technology Wiegand Proximity Reader
DGLP M WLC
Mifare Proximity Reader
DGLI WLC26 AND DGLI F WLC26
Mult-Technology Wiegand Proximity Reader
60 cm (23.5 in) read range
Selectable CDVI Wiegand output: 26,
30 or 44 bit format
Compatble with CDVI, Centaur
(Positon Technology) and most
26-bit format cards.
Red/Green LEDs and Buzzer
Operatng temp.: -30C to 60C
Power requirements: 12Vdc
DGLP60WLC
Wiegand Long Range Reader
Vandal proof housing
Backlit keys
Compatble with CDVI, Centaur
(Positon Technology) and most
26-bit format cards.
Red/Green LEDs and Buzzer
Operatng Temperature :
-25C to 70C
KCPROXWLC
Proximity card reader and keypad
Stainless steel proximity reader
Dust/Weather/Vandal resistant
26-bit format Wiegand output
Up to 8cm (3.5 in) read range
Poted electronics
Red/Green LEDs and Buzzer
Power requirements: 12Vdc
DGLI M WLC
Mifare Proximity Reader
CARD READERS & KEYPADS
16
PROMI DG1
The Installers Choice
PROMI / DG1
2-Door Stand-Alone Keypad
Surface mount keypad
500 user codes (5 digits)
Audible & Visual feedback
1 form C output and 1 N/O output,
tmed (1 to 99 sec.) or latched
2 request-to-exit inputs
All programming stored in non-volatle
EEPROM memory
Power requirements: 12Vac/dc
Consumpton: 120mA
Optonal remote keypad: KCP/BP
C2R100/US
Keypad with Built-in Controller
Fluorescent keypad keys
Stainless steel faceplate
Mounts on a singlegang box
150 user codes
3 to 6 digit codes
Programmable
audible feedback butons
Up to three outputs
(2 relays & 1 open-collector)
Illuminated stainless steel keypad
100 user codes (4 or 5 digits)
2 form C outputs (8A/250V),
tmed (1 to 99 sec.) or latched
Audible and visual feedback
Request-to-exit input
Poted electronics
Power requirements:
12/24 Vac or 12/48 Vdc
PROFIL100EC
Keypad with Remote Controller
Illuminated stainless steel keypad
100 user codes (4, 5 or 6 digits)
2 form C outputs (8A/250V),
tmed (1 to 99 sec.) or latched
Audible feedback butons
Request-to-exit input
Poted electronics
Power requirements:
12/24 Vac or 12/48 Vdc
Available with call buton (Door
bell/Chime): KCIEN
KCIEN/SBP
Illuminated Keypad with Built-in Controller
GALEO
Back-Lit Keypad with Remote Controller
100 user codes (4 or 5 digits)
Request-to-exit input
Programmable
audible feedback butons
Power: 12/48Vdc or 12/24Vac
GALEO: 1 relay output
GALEO2: 2 relay outputs
GALEO3: 3 relay outputs
Timed (1 to 99 sec.) or
latched output
Built-in controller
100 user codes (3 to 8 digits)
Request-to-exit input
Easy setup
Audible and visual feedback
Power requirements: 12Vdc/ac
PROMI ECO
1-Door Stand-Alone Keypad
Remote keypad for PROMI or DG1
High security stainless steel
constructon
Call buton
Audible feedback butons
Programming made from the host
keypad.
Power requirements: 12Vac/dc
KCP/BP
Remote Keypad
CARD READERS & KEYPADS
17
cdvi.ca
CPE
CP PPC
PP
BP
Cards are automatcally enrolled in CENTAUR database. Simply
present the badge in front of the unit and the code is transmited
into the PC in the cardholder fle.
Delivered with a proximity reader head.
It is possible to add other modules.
Other reader heads sold separately:
MA: Dallas type reader
MI: infrared
MR: RF receiver
MM: magnetc stripe
BP: Elegant leather key ring tag
CPE: Standard clamshell card
CP: Thin card for printng photos and text (ISO)
PPC: Rugged gray polycarbonate key ring card
PP: Stylish black polycarbonate tear drop card,
available for Mifare proximity reader: PVP
PROXIMITY CARDS AND BADGES

CMPP
Card Enrolment Unit
CDVI 26-bit Weigand format
Polycarbonate tag
40 mm x 33 mm x 4 mm
125 kHz proximity card
Sequentally generated decimal card
numbers (printed on each card)
Also available with HID encoding:
KTAGH
CDVI 26-bit Weigand format
85 mm x 54 mm x 1.8 mm
125 kHz proximity card
Sequentally generated decimal
card numbers
(printed on each card)
Also available with HID encoding:
CSH
CDVI 26-bit Weigand format
Printable on both sides
85 mm x 54 mm x .8 mm
125 kHz proximity card
Sequentally generated decimal card
numbers
(printed on each card)
Also available with HID encoding:
ISOH
CDVI 26-bit Weigand format
Polycarbonate tag
40 mm x 33 mm x 4 mm
125 kHz proximity card
Sequentally generated decimal card
numbers
(printed on each card)
Also available with HID encoding:
BTAGH
CDVI 26-bit Weigand format
Adhesive on one side
20 mm (Dia) x 1.5 mm (H)
125 kHz proximity card
Sequentally generated decimal
card numbers
(printed on each card)
Also available with HID encoding:
DISCTAGH
KTAG
Black Key Tag
CS
Standard clamshell card
ISO
Printable ISO Card
BTAG
Blue Key Tag
DISCTAG
Mini PVC Tag
These proximity cards and tags are
randomly generated hexadecimal card numbers
PROXIMITY CARDS & BADGES
18
PROMI500 DGPROX
DGLI/F
DGLI
DGLP/FN
DGLP
The Installers Choice
1000 users
(proximity card and/or codes)
3 operatng modes:
- Mode 0: card and code
- Mode 1: card only
- Mode 2: card or code
1000 event memory
16 holiday schedules
Real-tme event printng
Supports ant-passback
1 request-to-exit input & 1 Tamper
switch
Audible & Visual feedback
1 form C, door relay output (3A/125V)
1 form C, alarm relay output (3A/125V)
Power requirements: 12Vac/dc
PROMI1000PC
1-Door Stand-Alone Proximity Reader and Keypad
Remote readers for PROMI1000,
PROMI500 and DGPROX
Surface mount
Up to 50M (164f) between the
reader and the controller
Up to 8cm (3.5 in) read range
LED visual feedback
Power requirements: 12V ac/dc
Remote readers for PROMI1000,
PROMI500 and DGPROX
Vandal resistant
Up to 50M (164f) to the controller
Up to 8cm (3.5 in) read range
LED visual feedback
Power requirements: 12V ac/dc
DGLP / DGLP/FN
Polycarbonate Proximity Reader
DGLI / DGLI/F
Stainless Steel Proximity Reader
500 users
(proximity card and/or codes)
3 operatng modes:
- Mode 0: card and code
- Mode 1: card only
- Mode 2: card or code
Audible & Visual feedback
1 request-to-exit input
Tamper switch
1 form C, door relay output (3A/125V)
1 form C, alarm relay output (3A/125V)
Power requirements: 12VAC/DC
PROMI500 / DGPROX
1-Door Stand-Alone Proximity Reader and Keypad
SEF2405 / 2410 / 2420 /2420AVN
Infrared Photocell Detector
Power requirements: 12/24Vdc
Operatng temperature: -20C / +55C
SEF2405: Flat infrared photocell, range: 5M (16.5f)
SEF2410: Flat infrared photocell, range: 10M (33f)
SEF2420: Adjustable infrared photocell, range: 20M (66f)
SEF2420AVN: Vandal-proof adjustable infrared photocell, range:
20M (66f)
SEF2405 AND
SEF2410
SEF2420 SEF2420AVN
STAND-ALONE ACCESS CONTROL SYSTEMS
19
cdvi.ca
Shearlock
Self-Aligning
Power requirements: 12/24 Vdc
Current Draw: 600 mA @ 12 Vdc and
300 mA @ 24 Vdc
Compact mortse-mount
206mm (H) x 30mm (W) x 32mm (D)
(8 x 1.2 x 1.25)
Optonal surface mount kit
(KCZ 3000)
Surface mount installaton
Power requirements: 12/24Vdc
Current Draw: 550mA @ 12Vdc,
270mA @ 24Vdc
Zinc EM surface and anodized
aluminum housing
Flush mount installaton: V3E
Optonal monitoring sensor: V3SR
Retroft electromagnetc door handle
Complete Aluminium housing
Power requirements: 12/24Vdc
Current Draw: 560mA @ 12Vdc,
270mA @ 24Vdc
40 cm (H) x 12,6 cm (W) x 6,8 cm (D)
(15,75 in x 5 in x 2,7 in)
Flush mount installaton
Sliding door applicatons
Power requirements: 12/24Vdc
Current Draw: 550mA @ 12Vdc,
270mA @ 24Vdc
266mm (H) x 66mm (W) x40mm (D)
(10.5in x 2.5in x 1.5in)
Stainless steel
Exterior applicatons &
High-trafc areas
Power requirements: 12/24Vdc
Current Draw: 550mA @ 12Vdc,
280mA @ 24Vdc
220mm (H) x 64mm (W) x 40mm(D)
(8.6in x 2.5in x 1.5in)
Optonal monitoring sensor: VSI5R
Shearlock door handle
Patented self-aligning mechanism
Input voltage: 12, 24 or 48V dc
Current Draw: 460mA@12Vdc,
230mA@24Vdc & 150mA@48Vdc
Available in black:
PWM25PSR/RAL NOIR
Shearlock fush mount installaton
Patented self-aligning mechanism
Input voltage: 12, 24 or 48V dc
Current Draw: 460mA@12Vdc,
230mA@24Vdc & 150mA@48Vdc
Surface opton: PWM25SR
Visual feedback (red & green)
Surface mount installaton
Out-In-swinging door applicatons
Power requirements: 12/24Vdc
Current Draw: 550mA @ 12Vdc,
270mA @ 24Vdc
268mm (H) x 75mm (W) x 40mm (D)
(10.5in x 3in x 1.5in)
Optonal monitoring sensor: V5SR
V3S
300kg (660lbs) Holding Force
P400RN
400kg (880lbs) Holding Force
V5S
500kg (1100lbs) Holding Force
V5EI
500kg (1100lbs) Holding Force
CZ3000
1500kg (3300lbs) Holding Force
VSI5R
500kg (1100lbs) Holding Force
PWM25PSR
800kg (1750lbs) Holding Force
PWM25ER
800kg (1750lbs) Holding Force
ELECTROMAGNETIC LOCKS
20
The Installers Choice
CDVI high quality RADIUM transmiters/receivers
are the perfect soluton to operate parking gates,
garage doors, handicap doors, etc. These 433 MHz
radio frequency systems ofer longer range up
to 250m (820f), less interference jamming and
excellent reliability. Licensed KeeLoq Rolling Code
technology ensure ultra-secure transactons.
WIRELESS PRODUCTS
Up to 85 transmiter keys
1 NO relay + 1 NO/NC relay (24VA)
Self-learning memorizaton
Pulse, latched or delayed relay
output
Power requirements: 12/24Vac/dc
Dimensions: 105 x 45 x 28 mm
(4.3 x 1.75 x 1.1in)
Connect directly to
ATRIUM Wiegand port
Dimensions: 55 mm x 36 mm
(2.2 x 1.42 in.)
European design
Range up to 250 m (820 f)
Ergonomic, rugged & durable
One 12V lithium batery
Also available with
built-in proximity tag
WRW
Wiegand Wireless Receiver
WR2
2-Relay Stand-Alone Wireless Receiver
R1
1-Buton Remote
WRAP
ATRIUM Plug-in Wiegand Wireless Receiver
26-bit Wiegand output
Power: 12 or 24V (AC or DC)
Dimensions: 105 x 45 x 28mm
(4.3 x 1.75 x 1.1in)
Compatble with Centaur or any
26-bit Wiegand-capable systems
European design
Range up to 250 m (820 f)
Ergonomic, rugged & durable
One 12V lithium batery
Also available with
built-in proximity tag
European design
Range up to 250 m (820 f)
Ergonomic, rugged & durable
One 12V lithium batery
Also available with
built-in proximity tag
R2
2-Buton Remote
R4
4-Buton Remote
Installer's
Choice
YEAR WARRANTY
21
cdvi.ca
Increase recepton and/or range
11.5f (3.5m) coaxial cable
(RG 58) included
L-shaped bracket for
wall-mountng
SEA433
433Mhz Tuned Antenna
WRM
Mult-user Receiver
800 transmiters
Programming through a PC with
optonal sofware kit (WRMKIT) or
with a master transmiter R2M
Kit for WRM
Includes: Sofware (PCCOM), USB
driver, all necessary cables and a
plug-in memory back-up
WRMKIT
Sofware Kit for Mult-User Receiver
WR4
4-Relay Stand-Alone Receiver
Up to 85 transmiter keys
2 NO relay + 2 NO/NC relay
Standard pulse output
Relay 4 supports latched output
Voltage: 12/24Vac/dc
WIRELESS PRODUCTS
Output: 26 bit Wiegand
Compatble with
RACT actve tag remote
Sensitvity adjustable up to
50m (160 f)
Enclosure protecton: IP 65
Input voltage: 12 Vac/dc
WRACT
Wiegand Actve Tag Receiver
RACT
Actve Tag Remote
Transmits contnually
Tri-color LED for batery status
Range (line of sight): 20 m (65 f)
One 3V Lithium batery CR2032
Operatng temperature:
-30C to +70 C (-22F to 158 F)
Dimensions: 61 x 36 x 16 mm
(2.4 x 1.4 x .63 in)
Available with HID passive tag :
RACTH
RADIUM
Hands-Free Access Control System
RADIUM Hands-Free access control system is ideally suited for use in hospitals, residental homes,
parking lots, gates or simply where the convenience of hands-free access control is preferred. The
range adjustment, together with the ease of installaton and is fexibility makes RADIUM Hands-
Free access control system, the Installers Choice.
22
DWPS106SCD
DWPS106ACD
The Installers Choice
DWPS106ACD
Automatc door operator with artculated arm
(Pushes the door)
DWPS106SCD
Automatc door operator with sliding arm
(Pulls the door)
DWD1000
Microwave Moton Detector
DWSSS-1
Swing Door Safety
DWHR100-2
Door Actvaton + Safety
System identfcaton
Ref. Descripton
Input
Voltage
(Vac)
Dimensions
L x H x D
Door Weight
(kg)
Door Width
(m)
Consumpton
(mA)
DWPS106ACD
Door operator with an artculated arm for outward
opening door (pushes the door)
16Vac
509 x 90 x 110
(20 x 3.5 x 4.3 in.)
100kg
(220 Lbs)
1 meter
(3,28 f)
200mA
DWPS106SCD
Door operator with a sliding arm for inward opening
door (pulls the door)
16Vac
509 x 90 x 110
(20 x 3.5 x 4.3 in.)
100kg
(220 Lbs)
1 meter
(3,28 f)
200mA
Inward opening
Outward opening
Automatc door operator suitable for single
doors, inward or outward opening, lef or right
handed and with fail safe or fail secure locking.
Integrated wireless receiver, compatble with any CDVI 433Mhz
wireless transmiters.
(includes 1 transmiter: S2TR2641E2)
Adjustable pause tme
Stand-alone or connects to an access control system
Obstacle detecton
Operatng Modes: Free Gate, Automatc and Always open
Electronic calculaton of speed and movement
Includes backup batery
Advanced cross trafc fltering
technology makes the DWD1000
the ideal soluton for outward
opening doors
Guarantees optmum door usage
efciency through separate
adjustment of door actvaton and
pedestrian safety detecton zones
Ensures the optmum detecton
feld is easily and accurately
maintained through dip switch
adjustment of detecton distances
AUTOMATIC DOOR OPERATOR
23
cdvi.ca
DGID/W/US
Wiegand Fingerprint Reader
USB SCANNER
Fingerprint Enrolment Unit
PCMB
Mifare Tag Programmer for Cabaprox
26, 30 or 44-bit wiegand output
Self cleaning sensor area
3 LEDs to indicate sweeping directon
Upgradable frmware
Tamper switch
Power requirements: 12V ac/dc
Work in stand-alone mode
(Stores up to 350 fngerprints)
High quality fngerprint
Self-cleaning sensor
Automatc fnger detecton
Drivers for Microsof Windows 2000,
XP and Vista
Encrypted connecton with PC
Compatble with all Mifare tags
Mult-site
Fingerprint programmer
Includes:
- LCD display
- USB Scanner
- DB9 cable
- Sofware
- AC power transformer
CABAPROX/W
Biometric & Mifare Technology
Fingerprint reader +
Mifare proximity reader
Fingerprint template stored in the
badge/card
Limited fngerprints by sofware
database
26, 30 or 44-bit wiegand output
Current consumpton: 450mA
Available stand-alone model:
CABAPROX
NO and NC contact outputs with 2
separate contacts, DPDT
Stainless steel plate
Heavy duty switch
Mounts on a single gang box
Input voltage : 250 Vac @ 5A, 30 Vdc @
5A or 50 Vdc @ 2A
-40C (-40F) to +85C (185F)
Certfcatons : DEEE, RoHS, IP68, UL,
CSA, CE & SEMKO.
EXIT-BLP
Request-to-Exit Press Buton
Touch-sensitve illuminated buton
mounted on a stainless steel plate
1 relay output, NO/NC, 8A / 250V
Adjustable sensitvity
Adjustable relay tmer
Power requirements: 12Vac/dc
BPEST
Touch-To-Exit Buton
Transforms any metallic surface into a
Request-To-Exit device or switch
1 relay output, NO/NC, 8A / 250V
Adjustable sensitvity
Adjustable relay tmer
Power requirements: 12Vac/dc
EST
Touch-Sensitve Electronic
EXIT-BLP
FLEX30
Stainless Steel Door Loop
30 cm (12 inches) door loop
Armored stainless steel loop with fush
mount heads for wire terminaton
inside door and frame
Cast aluminium end caps
BIOMETRIC FINGERPRINT READERS & REX
The Installers Choice
CDVI Americas
1637 Highway 440 West
Laval, Qubec, Canada, H7L3W3
Toll Free: 1-866-610-0102
Tel.: (450) 682-7945
Email: [email protected]
cdvi.ca
Web-Based
Access Control System
All the information contained within this document (pictures, drawing, features, specifcations and
dimensions) could be perceptibly different and can be changed without prior notice.
Printed in Canada - February 2014 - CDVICATA-E08

You might also like