Scribd Logo
Upload

Welcome to Scribd!

  • 186 views

    New NFT PDF

    Uploaded by

    aldeanucu
    Near field technique (NFT) eddy current technology is a rapid and inexpensive inspection solution designed specifically for ID defect detection in carbon steel fin-fan tubes. NFT probes cut costs and improve ease of use because they do not require expensive and cumbersome externally referenced coils.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    New NFT PDF

    Uploaded by

    aldeanucu
    186 views2 pages
    Near field technique (NFT) eddy current technology is a rapid and inexpensive inspection solution designed specifically for ID defect detection in carbon steel fin-fan tubes. NFT probes cut costs and improve ease of use because they do not require expensive and cumbersome externally referenced coils.

    Original Title

    NEW NFT.pdf

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Near field technique (NFT) eddy current technology is a rapid and inexpensive inspection solution designed specifically for ID defect detection in carbon steel fin-fan tubes. NFT probes cut costs and improve ease of use because they do not require expensive and cumbersome externally referenced coils.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    186 views2 pages

    New NFT PDF

    Uploaded by

    aldeanucu
    Near field technique (NFT) eddy current technology is a rapid and inexpensive inspection solution designed specifically for ID defect detection in carbon steel fin-fan tubes. NFT probes cut costs and improve ease of use because they do not require expensive and cumbersome externally referenced coils.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 2

    Eddy Current on

    thin ID layer only


    Sensitivity zone
    Driver coil
    Lead RX coil
    Trail RX coil
    Standard near eld testing probe with stainless steel casing
    60% ID
    groove
    0.25 in. hole
    40% ID
    groove
    Tube cut
    Typical calibration data
    Corroded tubes pulled from service
    920-134A-EN
    Near Field Probes
    TRD series probes
    The all-new near eld technique (NFT) eddy current technology is a rapid and inexpensive
    inspection solution designed specically for ID defect detection in carbon steel n-fan
    tubes. NFT probes cut costs and improve ease of use because they do not require expensive
    and cumbersome externally referenced coils.
    This new technology, which is based on a simple eddy current driver/pickup design, pro-
    vides signals that are very easy to analyze. Because NFT probes operate within the same
    frequency range as remote eld technique (RFT) probes, NFT probes are manufactured for
    use with the standard MultiScan MS 5800 RFT connector.
    NFT Signal
    Features
    Ideal for carbon steel n-fan tubes
    No need for a reference probe or extension
    Excellent detection of internal corrosion and
    axial cracks based on sensitivity of eddy
    current to lift-off (or ll-factor)
    Absolute and differential channels
    High-quality amplitude-based signals for
    very fast and simple data analysis
    Thick stainless-steel casing for increased
    wear resistance
    Compatible with the MultiScan MS 5800R
    instrument
    NOTE: These probes are not designed to detect OD defects
    or circumferential cracks.
    OLYMPUS NDT
    48 Woerd Avenue Waltham, MA 02453 USA
    Tel.: (1) 781-419-3900 Fax: (1) 781-419-3980
    12569 Gulf Freeway Houston, TX 77034 USA
    Tel.: (1) 281-922-9300 Fax: (1) 952-487-8877
    OLYMPUS NDT UK LTD.
    12 Nightingale Close Rotherham, South Yorkshire S60 2AB UK
    OLYMPUS SINGAPORE PTE. LTD.
    491B River Valley Road 12-01/04, Valley Point Offce Tower, 248373 Singapore
    OLYMPUS AUSTRALIA PTY. LTD.
    PO Box 985 Mount Waverley, VIC 3149 Australia
    www.olympusNDT.com
    [email protected]
    NFT_Probe_0803PrintedinCanadaCopyright2008byOlympusNDT.
    Allspecifcationsaresubjecttochangewithoutnotice.Allbrandsaretrademarksorregisteredtrademarksoftheirrespectiveowners.
    Probe Part Number Example
    Near eld probe model (TRD), 17.0 mm diameter (170), 300 Hz center frequency (300), nylon-type standard cable (N), 30-meter cable
    length (30).
    Probe Outside Diameter
    Standard probe diameters are available from 16.0 mm (0.63 in.) to 28.0 mm (1.10 in.). The part number shows the diameter in tenths of
    a millimeter (1/10 mm): therefore, 17.0 mm = 170. The standard diameters available are listed in the chart below:
    Probe diameter (catalog) Diameter value
    160 16.0 mm (0.63 in.)
    170 17.0 mm (0.67 in.)
    180 18.0 mm (0.71 in.)
    220 22.0 mm (0.87 in.)
    240 24.0 mm (0.94 in.)
    260 26.0 mm (1.02 in.)
    280 28.0 mm (1.10 in.)
    300 30.0 mm (1.18 in.)
    Probe Center Frequency
    The only available central frequency is 300 (300 Hz) and the frequency range is from 100 Hz to 1 kHz.
    Probe Cable
    Probe cable material is nylon (N) only.
    Cable lengths are in meters: 30 m (100 ft) is the most common length. Also available in a 20 m (65 ft) length.
    TRD-170-300-N30
    Probe diameter (17 mm) Cable Length (30 m)
    Also available: 20 m

    You might also like