Scribd
Upload
245 views2 pages

Triac

Triac is an electronic device that acts as a bidirectional switch, allowing current to flow in either direction when triggered. It is made up of two silicon controlled rectifiers connected in inverse parallel with their gates connected. This allows the Triac to be triggered on either the positive or negative half of the AC cycle. When triggered by a pulse to its gate electrode, the Triac will latch and remain conducting for the rest of the half cycle, enabling full power to flow through an attached device like a lamp. The three terminals of the Triac are MT1, MT2 for the main current path, and G for the gate trigger pulse.

Uploaded by

Rameez Irfan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
245 views2 pages

Triac

Triac is an electronic device that acts as a bidirectional switch, allowing current to flow in either direction when triggered. It is made up of two silicon controlled rectifiers connected in inverse parallel with their gates connected. This allows the Triac to be triggered on either the positive or negative half of the AC cycle. When triggered by a pulse to its gate electrode, the Triac will latch and remain conducting for the rest of the half cycle, enabling full power to flow through an attached device like a lamp. The three terminals of the Triac are MT1, MT2 for the main current path, and G for the gate trigger pulse.

Uploaded by

Rameez Irfan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

How Triac works?

Modern power control systems utilize electronic devices like Thyristors for power
switching, phase control, chopper etc. These devices also find applications in inverter
design, brilliance control in lamps, speed control of motors etc. The electronic power
control circuits are designed to control the distribution or levels of AC or DC power
sources. Such power control circuits can be used to manually switch power to electrical
devices or to switch power automatically when parameters such as temperature or light
intensities go beyond preset levels.

TRIAC
Triac or TRIode for alternating current is an electronic device equivalent to two silicon
controlled rectifiers joined in inverse parallel (but with polarity reversed) with their gates
connected together. This results in a bi-directional electronic switch, which can conduct
current in either direction when triggered. Like SCR, Triac is also a three terminal device.
The MT1 and MT2 (Main Terminals 1 and 2) terminals are used to pass current in either
direction while the third terminal G ( gate ) is used to send trigger pulse to the device.
Triac can be triggered by either a positive or negative voltage applied to its gate
electrode. When the voltage on the MT2 terminal is positive with respect to MT2 and a
positive voltage is applied to the gate, the Left SCR in the Triac conducts. If the voltage
is reversed and a negative voltage is applied to the gate, the Right SCR conducts.
Minimum holding current Ih must be maintained to keep the Triac conducting. AC or
DC pulses can trigger Triac and four modes of triggering are possible.

1. Positive voltage to MT2 and positive pulse to gate

2. Positive voltage to MT2 and negative pulse to gate

3. Negative voltage to MT2 and positive voltage to gate

4. Negative voltage to MT2 and negative voltage to gate.

Operation of Triac is simple. Fig. 4 explains the working of Triac. Normally Triac
remains as an open switch and the lamp remains off. When switch S1 is On, R1
provides gate current to Triac, so Triac self latches shortly after the start of each half
cycle and the lamp will be provided with full power.

Type

SCR
Volt and
Current
Rating
Pin
Assignment
(Front view)

Type

TRIAC
Volt and
Current
Rating
Pin
Assignment
(Front view)

2P4M 500V- 2A KAG BT 136 600V 4A MT1 MT2 G
2P5M 600V 2A KAG BT 138 600V 12A MT1 MT2 G
2P6M 700V -2A KAG BT 139 600V 16A MT1 MT2 G
5P4M 500V 5A KAG BTA 23 800V 12A MT1 MT2 G
5P5M 600V 5A KAG BTA 22 800V 10A MT1 MT2 G
5P6M 700V 5A KAG BTA 40 800V 40A A1 A2 G
3P2M 300V 0.47A GAK BTA 41 800V 40A A1 A2 G
3P4M 500V 0.47A GAK BTB 41 800V 40A A1 A2 G
TYN 412 600V 12A KAG
TYN 416 600V 16A KAG
TYN 604 600V 16A KAG
BT 169 400V 0.5A KAG
BT 151 650V 12A KAG
C 106 600V 4A KAG
MCR 100 600V 0.8A KAG
CYN B
25
1000V 25A KAG
CYN B
40
1000V 40A KAG

You might also like