Scribd
Upload
122 views

Week 6 - Problem Set Assignment PDF

This document outlines the instructions for a problem set assignment involving creating an assembly drawing and part drawing in Autodesk Inventor. Students are provided with 10 part and assembly files to use for the drawings. They must create an assembly drawing matching the example and complete a part drawing with added sections, dimensions, and geometric dimensioning and tolerancing symbols. The drawings will be graded based on completion of the assembly drawing, property population, and meeting the three part drawing requirements.

Uploaded by

Paco Jones
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
122 views

Week 6 - Problem Set Assignment PDF

This document outlines the instructions for a problem set assignment involving creating an assembly drawing and part drawing in Autodesk Inventor. Students are provided with 10 part and assembly files to use for the drawings. They must create an assembly drawing matching the example and complete a part drawing with added sections, dimensions, and geometric dimensioning and tolerancing symbols. The drawings will be graded based on completion of the assembly drawing, property population, and meeting the three part drawing requirements.

Uploaded by

Paco Jones
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 7

ME 24-688 Week 6

Problem Set Assignment




ME 24-688 Introduction to CAD/CAE Tools Page 1 of 7

1 Detailed Component Drawing Creation
The week six problem set assignment focuses on the drawing environment of Autodesk Inventor. The
goal of the assignment is to construct an assembly drawing and a part drawing


1.1 Provided Items
To start the assignment you are provided 10 files consisting of Autodesk Inventor part and assembly files
in a ZIP file. Using the provided files you can create and detail the part file and assembly.

Assembly Drawing
Use the ANSI (mm).dwg template for the assembly drawing..

2012-2-9000.dwfx has been provided for additional review

Part Drawing
2012-2-9003.dwg is the starting point for the part drawing for this problem set.
1.2 Final Deliverable

Once both drawing are complete submit a DWF file for each.

Save each drawing using the following naming convention:

ps6_your_andrew_id_xxx
(xxx: descriptive name)

1.3 Grading
Grading for this problem set will be based on the following elements:
45% - Correctly completing the Assembly drawing
10% - iProperty population for BOM
15% - Completing Drawing Requirement 1
15% - Completing Drawing Requirement 2
15% - Completing Drawing Requirement 3

ME 24-688 Week 6

Problem Set Assignment


ME 24-688 Introduction to CAD/CAE Tools Page 2 of 7

1.4 Assembly Drawing Instructions
Create and exact replica of the Assembly drawing shown below.

ME 24-688 Week 6

Problem Set Assignment


ME 24-688 Introduction to CAD/CAE Tools Page 3 of 7

1.5 Part Drawing Instructions
Complete the Part Drawing Requirements using 2012-2-9003.dwg shown below:
ME 24-688 Week 6

Problem Set Assignment


ME 24-688 Introduction to CAD/CAE Tools Page 4 of 7

Part Drawing Requirement 1
Add Section C-C using the top projected view shown below to provide all the necessary
information for any one of the mounting holes,
o Dimension the clearance holes diameter, tapered lead in and the height of the lip.
o The tolerance on the clearance hole diameter is

.

o Use the same origin from the base view for all ordinate dimensions


ME 24-688 Week 6

Problem Set Assignment


ME 24-688 Introduction to CAD/CAE Tools Page 5 of 7

Part Drawing Requirement 2
In Section B-B add the required feature control (GD&T) symbol to do the following
o Hold the Perpendicularity of the Worm centerline and the centerline of the Worm Gear
within .05 mm.

o Hold the Concentricity of the clearance for the worm gear with respect to the Worm
Gear driven shafts centerline within .08 mm.


ME 24-688 Week 6

Problem Set Assignment


ME 24-688 Introduction to CAD/CAE Tools Page 6 of 7

o Hold the Position of the centerline of the shaft in relation to the centerline of the worm
within .02 mm.


ME 24-688 Week 6

Problem Set Assignment


ME 24-688 Introduction to CAD/CAE Tools Page 7 of 7

Part Drawing Requirement 3
Add a projected view below the base view
o Ordinate dimension for all the mounting holes

o Add an A datum identifier symbol

You might also like