Scribd
Upload
2K views2 pages

Structural Analysis Laboratory - Experiment - Rquired Apparatus

List of experiments for structural analysis (theory of structures)laboratory and required apparatus to perform the experiments.

Uploaded by

Santosh Kumar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
2K views2 pages

Structural Analysis Laboratory - Experiment - Rquired Apparatus

List of experiments for structural analysis (theory of structures)laboratory and required apparatus to perform the experiments.

Uploaded by

Santosh Kumar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

DEPARTMENT OF CIVIL ENGINEERING, UIT (AUTONOMOUS), RGPV, BHOPAL,

MADHYA PRADESH
STRUCTURAL ANALYSIS LABORATORY: EXPERIMENTS LIST

Experiment No. 1: To verify Maxwell-Betts Law.
Apparatus: Aluminum beam with graduation, knife edge supports, dial gauge, magnetic base
stands and weights.

Experiment No. 2: To determine the flexural rigidity of the beam verify it theoretically.
Apparatus: M.S. beam with graduation, knife edge supports, dial gauge, magnetic base stands
and weights, Vernier Caliper.

Experiment No. 3: To determine the deflection of a pin jointed truss and to verify the results
theoretically and graphically.
Apparatus: Truss apparatus, weights, hanger, dial gauge, scale and Vernier Caliper.

Experiment No. 4: To verify strain in an externally loaded beam with the help of a strain
gauge indicator and to verify theoretically.
Apparatus: Strain gauge Indicator, weights, hanger, scale, verniar caliper.

Experiment No. 5: To study behavior of different types of columns and find Eulers buckling
load for each case.
Apparatus: - Column Buckling Apparatus, Weights, Hanger, Dial Gauge, Scale, Verniar caliper.

Experiment No. 6: To study two hinged arch for the horizontal displacement of the roller
end for a given system of loading and to compare the same with those obtained analytically.
Apparatus: Two Hinged Arch Apparatus, Weights, Hanger, Dial Gauge, Scale, Verniar
Caliper.

Experiment No. 7: To study the behavior of a portal frame under different end conditions.
Apparatus: - Portal Frame Apparatus, Weights, Hanger, Dial Gauge, Scale, Verniar
caliper.

Experiment No. 8: To find the value of flexural rigidity (EI) for a given beam and compare it
with theoretical value.
Apparatus: - Elastic Properties of deflected beam, weights, hanger, dial gauge, scale,and
Verniar caliper.

Experiment No. 9: To determine the deflection of a pin connected truss analytically &
graphically and verify the same experimentally.
Apparatus: - Truss Apparatus, Weights, Hanger, Dial Gauge, Scale, Verniar caliper.

Experiment No. 10: To verify the Muller Breslau theorem by using Beggs deformator set.
Apparatus: Muller Breslau Principal Beggs Deformeter, Micrometer , Microscope,
Functioning plugs, Influence line ordinates, Drawing board, Pins etc.

Experiment No. 11: To verify clerk Maxwells reciprocal theorem.
Apparatus: Clerk Maxwells Reciprocal Theorem apparatus, Weights, Hanger, Dial
Gauge, Scale, Verniar caliper.

Experiment No. 12: To determine material fringe value by using diffused light research
polariscope.
Apparatus: Diffused light research polariscope, photo elastic model.

Experiment No. 13: To verify the moment area theorem regarding the slopes and deflections
of the beam.
Apparatus: Moment of area theorem apparatus.

Experiment No. 14: To determine the moment required to produce a given rotation
(rotational stiffness) at one end of the beam when the other end is pinned.

You might also like