Exactra 2014 PDF

TIRE INFLATION
SOLUTIONS
FOR HEAVY
EQUIPEMENT
ABOUT EXACTRA
EXACTRA is a family-owned organization operating since 1988 and specializing
in the manufacture of Large Bore (LB), Super Large Bore (SLB), Super Extra Large
Bore (SXL), and Super Giant Bore (SGB) tire inating valves as well as various
related inating systems.
Our mission has always been to be totally dedicated to the off-the-road tires
used in mining operations as well as construction sites. Our goal is, and always
will be, to supply the industry with superior products and service at a competitve
price.
EXACTRA was founded by Maurice Robitaille offering over 50 years of hands
on experience in the mining and construction sectors of the Off-The-Road tire
application. The experience acquired spanned from servicing the tires, to eld
engineering, to sales and marketing as well as manufacturing inating systems.

During the past 20 years EXACTRA has developed and introduced (1995) the
Super Extra Large Bore (SXL) to the industry which has since been imitated by
other manufacturers. More recently, EXACTRA developed the Super Giant Bore
(SGB) line of products which is an improved version of a similar product on the
market.
Currently, with a view of providing more safety for the tire servicemen, EXACTRA
has introduced an improved model of inating adaptor for the Super Large Bore
(SLB), Super Extra Large Bore (SXL) and Super Giant Bore (SLB). The features of
this improved model can be seen on pages 8, 13 and 22 of this catalogue.
EXACTRA has the ability and expertise to develop special requirements such as
high heat resistant hoses for applications where there is heat being generated
due to high speeds, long hauls, heavy loads and/or vehicle design.
VISIT EXACTRA-VALVES.COM FOR MORE INFORMATION |
1
S
Y
S
T
E
M
S

C
O
M
P
A
R
I
S
O
N
LARGE BORE (LB)
Although identied as LARGE BORE, it does not really reect
the effectiveness when in use, as the actual bore is a mere
3/16. However, when originally introduced, it did offer a
signicant improvement over the STANDARD bore products.
SUPER LARGE BORE (SLB)
Introduced in the early 1970, SUPER LARGE BORE featured
a huge improvement in the required time to inate a large
tire. The bore was improved from 3/16 to just under 1/2.
It is still one of the most popular systems, primarily because
of minimum clearance needed over the SUPER EXTRA LARGE
and SUPER GIANT bores. It is also the most cost effective
system.
SUPER EXTRA LARGE BORE (SXL)
Introduced by EXACTRA in mid 1990s, it improved the bore
to just under 5/8 thus reducing ination time by as much as
50% over the SUPER LARGE BORE system. Since the various
components are somewhat larger than those of the SUPER
LARGE BORE, the application is limited to where there is
sufcient clearance between the wheel/rim and the drive/
braking assembly.
SUPER GIANT BORE (SGB)
This system was introduced by EXACTRA during the last
decade. It offers a similar ow as that of another product of
same bore, but is more user friendly. The bore was improved
from just under 5/8 for SUPER EXTRA LARGE to just under
3/4 allowing for a further reduction in ination time by as
much as 50% over the SUPER EXTRA LARGE bore. Here the
application is also restricted to vehicles that offer sufcient
clearance between the wheel/rim and the drive/braking
assembly.
VALVE SYSTEM INFLATION TIME VALVE HOLES INFLATOR REQUIRED FOR TIRE SIZES
LARGE BORE (LB) 13/16 1/2 NPT LARGE BORE CHUCK UP TO 25
SUPER LARGE BORE (SLB) 100 LEVEL 13/16 1/2 NPT EX-900S or EX-95ADK UP TO 57
SUPER EXTRA LARGE BORE (SXL) 50% of 100 LEVEL 13/16 1/2 NPT SXL-900S or EX-95ADK UP TO 69
SUPER GIANT BORE (SGB) 50% OF SXL 15/16 3/4 NPT SGB-900S or EX-95ADK UP TO 69
SYSTEMS COMPARISON
There are four different systems available to inate
OFF-THE-ROAD (OTR) tires, as follows:
SUPER GIANT BORE
0.69 / 17.526 mm
SUPER LARGE BORE
0.44 / 11.176 mm
LARGE BORE
0.19 / 4.826 mm
SUPER EXTRA LARGE BORE
0.56 / 14.224 mm
| TO PLACE AN ORDER CALL 905.791.1429 2
S
A
F
E
T
Y

P
R
E
C
A
U
T
I
O
N
S
SAFETY PRECAUTIONS
DO use the proper valves for all applications. The approach of
one size ts all is never a good one as it leads to failure.
DO use one piece valve whenever possible to minimize joints.
DO tighten all connections only to recommended torque. It is
not a strongman contest.
DO make sure the proper matching rim and wheel components
are used.
DO inspect all rim and wheel components for damage such as
cracks.
DO make sure all components are clean and free of rust.
DO use a proper lubricant on all rim parts to facilitate tire
seating and prevent rusting.
DO use a liquid type lubricant for the O-ring for proper
seating and prevent pinching.
DO use proper tools for the job.
DO inate tires to the T.R.A. Recommended pressure for the
application.
DO check service gauges against a master gauge on a daily
basis.
DO use proper inating adaptors for the bore (i.e. EX-900S-L
for Super Large Bore.)
DO check air pressures daily, because the tire in itself does
not carry the load, but rather serves the purpose of being a
pressure container for the purpose of carrying the load. The
proper ination pressure is one important factor in extending
the life of the tire.
DO use an inating device, with sufcient hose length, to
ensure the servicemans safety and use proper retaining device
in event of components failing to engage properly.
DO NOT change the bend angle of a valve as it puts extra
stress in the area of the bend. There are valves made with
proper angle bend for all applications.
DO NOT use extensions unless absolutely necessary. They can
be a source of leakage.
DO NOT covertighten any of the connections as this can lead
to early failure.
DO NOT use an improper ange or lock ring.
DO NOT use components that show signs of damage.
DO NOT t tires on bead seat areas that have rust buildup.
DO NOT use petroleum or heavy based lubricants.
DO NOT use inadequate tools. There are proper tools for
each job.
DO NOT assume that the tire is at proper pressure. Do not
reduce pressure in a hot tire.
DO NOT use a large bore chuck on super large bore as this
defeats the advantages.
DO NOT mishandle gauges as they can be decalibrated if
dropped or thrown in the box.
DO NOT stand in front of the tire and rim assembly during the
ination/deation process.
Tire and Rim Servicing can be dangerous, and should only be performed by trained personnel using
the proper tools and procedures.
Failure to comply with these procedures as well as procedures recommended by Tire, Wheel and/or
Rim Manufacturers may result in faulty positioning of the tire and rim and cause the assembly to burst
with explosive force sufcient to cause serious physical injury or death.
The following safety precautions relate to the safe use of EXACTRA products:
3
T
A
B
L
E

O
F

C
O
N
T
E
N
T
S
Systems Comparison ......................................................................................................... 1
Safety Precautions ............................................................................................................ 2
SUPER GIANT BORE (SGB)
Complete Valve Asssemblies............................................................................................... 4
Flexible Tubing, Assembly Tool, Swivel Angle Connectors, Rim Spuds ...................................... 5
Core Housing, Jam Nuts, Connectors, Sleeves, Flexible Extension Assembly Kits ....................... 6
Straight Valve Assemblies, Swivel Valve Assemblies, Spud/Connector ..................................... 7
Inator Adaptors .............................................................................................................. 8
SUPER EXTRA LARGE BORE (SXL)
Complete Valve Assemblies, Flexible Extensions.................................................................... 9
Rigid Swivel Valve, Angle Connectors, Assemblies, Loader Valve, Valve Extensions..................10
Extension Assembly Tool, Flexible Tubing, Spuds, Connectors ................................................ 11
Core Housing, Jam Nuts, Swivel Connectors, Sleeves, Flexible Extension Assembly Kits ............12
Inator Adaptors ..............................................................................................................13
SUPER LARGE BORE (SLB)
Complete Valve Assemblies, Flexible Extensions ..................................................................14
Flexible Extensions, Double Spud Valve Assembly, Rigid Swivel Valve Assemblies ....................15
Rigid Turret Valve Assemblies, Flexible Tubing, Assembly Tool ...............................................16
Core Housing, Jam Nuts, Swivel Connectors, Sleeves, Assembly Kits ......................................17
Core Housings, Valve Assemblies, Out-In Spud, Loader Valve ...............................................18
Screw-In Angle Spuds, Clamp-In Connector, Swivel Angle Connectors ...................................19
Spuds ............................................................................................................................ 20
Plug, Valve Cap, Assembly Tool, Swivel Valve, Custom Valves .............................................. 21
Inator Adaptors ............................................................................................................. 22
LARGE BORE (LB)
Single-Bend Swivel Valves ................................................................................................ 23
Multiple-Bend Swivel Valves, Turret Valves ......................................................................... 24
Repair Valves, High Bend Valves, Loader Valve, Tank Valve ................................................. 25
Special Formed Valves ..................................................................................................... 26
Rim Spud, Screw-In Spud, Out-In Spud, Hole Plug, Adaptors ................................................ 27
Straight Valves, Caps, Long & Short Valve Cores .................................................................28
Rigid Extensions, Hand Bendable Extensions, Flexible Extensions, Extension Assembly Kit ....... 29
TRACTOR/GRADER & SMALL LOADERS
Air Water Valves, Air Water Valve Extensions .................................................................... 30
Air Water Assembly, Core Housings, Rim Hole Plug, Brass/Chrome Valves, Rim Nuts...............31
Tank Valves, Liquid Fill Tool ...............................................................................................32
TRUCK & BUS VALVES
TR570 Series Valves, O-Ring Series Valves ......................................................................... 33
V3-20 Valves, Enkei Valves, Alcoa Valves & Low Prole Valves, Small Clamp-In Valves ........... 34
Screw-On Repair Valves .................................................................................................. 35
Valve Extensions, Flexible Extensions, Bent Extensions ......................................................... 36
PASSENGER & LIGHT TRUCK
Snap-In Valves, Metal Extension Caps, Standard Valve Cores, Standard Valve Caps ...............37
DIAL GAUGES & DIGITAL GAUGES
Standard/Large Bore Dial Gauges, Pocket Dial Gauge, Digital Pressure Gauge ..................... 38
Large Bore Digital Pressure Gauges, Precision Dial Gauges ................................................. 39
Pocket Type Gauges, Dual Foot Gauges, Swivel Foot Gauges, Recalibrateable Gauges .......... 40
TOOLS
Tire Technicians Tool Kits, Standard Bore Tube Deator, Core Removal Tools .......................... 41
Valve Core Tools, Valve Cap Tools, Extractor Tools, Valve Fishing Tools ................................. 42
Valve Core Tools, Tire Tread Depth Gauges ....................................................................... 43
INFLATORS
Standard Bore Inators, Large Bore Inators, Standard/Large Bore Dual Inators ................... 44
Standard Bore Inators, Large Bore Inators, Precision Large Bore Inators ............................ 45
CHUCKS
Ball Foot Chucks, Clip-On Chucks, Screw-On Chucks, Lock-On Chucks ................................. 46
Clip-On Chucks, Dual Foot Chucks ................................................................................... 47
O-RINGS & L-RINGS & GROMMETS ................................................................................ 48
TABLE OF CONTENTS (contd)
S
U
P
E
R

G
I
A
N
T

B
O
R
E

(
S
G
B
)
SUPER GIANT BORE
(
SGB
)
COMPLETE VALVE ASSEMBLI ES
SUPER GIANT BORE
EXACTRAs SUPER GIANT BORE (SGB) line up now features additional spuds & swivel connectors
to be compatible with some of the MEGA BORE components. These two new parts are identied
in the SGB-700 series as follows: SGB-715 Screw-in Spud, SGB-725 Clamp-in Spud as well as
SGB-775, SGB-785, SGB-790 which are all Swivel Connectors of various angles.
The SGB-715 & SGB-725 will accept the MEGA BORE MB-29-85 connector. The SGB-775,
SGB-785 & SGB-790 swivel connectors will accept the MEGA BORE MB-20 spud.
SGB
--
130
--
##
Complete swivel valve assembly including SGB-110 (core housing) and
SGB-120 (clamp-in spud). It is used primarily on tire sizes 57 and 63
where there is sufcient clearance between the wheel and drive mechanism.
When ordering simply indicate the length required by replacing the -##.
For example a 36 assembly would be ordered as follows: SGB-130-36
SGB
--
730
--
##
Basically same as SGB-130 except for the SPUD & SWIVEL connector which
are designed to be compatible with some of the MEGA BORE components.
The spud is SGB-725 & the swivel connector is the SGB-790.
SGB
--
131
--
##
Same as SGB-130 & SGB-730 except without the SGB-120 or SGB-725
spuds.
SGB
--
135
--
## Flexible Extension
Flexible extension only.
SGB-130
SGB-131
SGB-135
L
L
L
SGB-190
SGB-100
SGB-155
SGB-125
SGB-155
SGB-125 SGB-165
SGB-150
SGB-100
113-B90
SGB-110
5
S
U
P
E
R

G
I
A
N
T

B
O
R
E

(
S
G
B
)
SUPER GIANT BORE
(
SGB
)
FLEXI BLE TUBI NG, ASSEMBLY TOOL, SWI VEL ANGLE CONNECTORS, RI M SPUDS
SGB

Swivel Angle Connectors (100 series)
Swivel angle connectors to t on SGB-120 clamp-in spud and SGB-115
screw-in spud. They are available in a variety of angles as shown below:
SGB-190 - 90 SGB-185 - 85 SGB-175 - 75
SGB-170 - 70
SGB-185
SGB-785
SGB

Swivel Angle Connectors (700 series)
Swivel angle connectors to t on SGB-725 clamp-in spud and SGB-715
screw-in spud. They are available in a variety of angles as shown below:
SGB-790 - 90 SGB-785 - 85 SGB-775 - 75
SGB
--
115 Rim Spud
The SGB-115 rim spud ts 3/4 NPT tapped rim hole and is designed for the
SGB-175, 185 & 190 swivel connectors. Accepts the SGB-110 core housing.
SGB-115
SGB
--
120 Rim Spud
The SGB-120 rim spud for a 15/16 rim hole is designed for the SGB-175,
185 & 190 series of swivel connectors and will accept the SGB-110 core
housing.
SGB-120
SGB
--
950 Assembly Tool
Assembly tool used in eld operations to make up SGB-130 series exible
extensions.
SGB-950
SGB
--
165 Flexible Tubing
Tubing to make up SGB-130 series exible extensions. Inside diameter is .
Available in 100 rolls.
SGB-165
SGB
--
715 Rim Spud
The SGB-715 rim spud ts 3/4 NPT tapped rim hole and is designed for the
SGB-775, 785 & 790 swivel connectors but WILL NOT accept the SGB-110
core housing.
SGB
--
725 Rim Spud
The SGB-725 rim spud for a 15/16 rim hole is designed for the SGB-775,
785 & 790 series of swivel connectors but WILL NOT accept the SGB-110
core housing.
S
U
P
E
R

G
I
A
N
T

B
O
R
E

(
S
G
B
)
SUPER GIANT BORE
(
SGB
)
CORE HOUSI NG, JAM NUTS, CONNECTORS, SLEEVES, FLEXI BLE EXTENSI ON ASSEMBLY KI TS
SGB
--
100 Jam Nuts
Jam nuts used on SGB-120 & SGB-725 clamp-in spuds and also to tie down
longer valve assemblies.
SGB
--
125 Sleeves
Sleeves used on SGB-130 series of exible extensions to retain tubing onto
SGB-150 & SGB-155 connectors.
SGB
--
110 Core Housing
Core housing for all SGB line of products.
SGB
--
150 Straight Connector
Straight connector used in production of SGB-130 series exible assemblies
to accept the SGB-110 core housing.
SGB
--
155 Swivel Connector
Swivel connector used in production of SGB-130 series exible assemblies
in order to attach to the various angle connectors.
SGB-110
SGB-100
SGB-155
SGB-150
SGB-125
SGB
--
160 Flexible Extension Assembly Kit
Kit made up of following components for eld assembling of exible
extensions:
1 each of SGB-110, SGB-150, SGB-155
2 each of SGB-125, SGB-100
SGB
--
160/1 Flexible Extension Assembly Kit
extensions:
SGB-160
7
S
U
P
E
R

G
I
A
N
T

B
O
R
E

(
S
G
B
)
SUPER GIANT BORE
(
SGB
)
STRAI GHT VALVE ASSEMBLI ES, SWI VEL VALVE ASSEMBLI ES, SPUD/CONNECTOR
SGB
--
140 Straight Valve Assembly
Straight valve assembly consisting of SGB-120 clamp-in spud and SGB-110
core housing.
SGB
--
Straight valve assembly consisting of SGB-115 screw-in spud and SGB-110
core housing.
SGB-141
SGB-140
SGB
--
145 Swivel Valve Assembly
SGB-145 swivel valve, consisting of SGB-120 spud, SGB-190 connector
and SGB-110 core housing.
SGB-745
SGB
--
285 Spud/Connector
85 angle screw-in spud/connector to t into NPT threaded valve hole.
SGB-285
SGB
--
SGB-745 swivel valve is meant to be compatible with MEGA BORE spuds.
It is similar to SGB-145, but consists of SGB-725 spud, SGB-790 connector
and SGB-110 core housing.
S
U
P
E
R

G
I
A
N
T

B
O
R
E

(
S
G
B
)
I NFLATOR ADAPTORS
EX
--
95
--
ADK Inator Adaptor
Inator adaptor with same features as SGB-900S-L but can be used for any of
the SUPER LARGE BORE, SUPER EXTRA LARGE BORE and SUPER GIANT BORE
simply by attaching the corresponding union.
It is delivered complete with the three unions.
SGB
--
900S-L Inator Adaptor
Inator adaptor for SGB line of products. Allows faster ination/deation
of giant tires. This inator allows air line connections of either 1/2 NPT
male or 3/4 NPT female threads. It also features safety factors inasmuch
as the union attaches to the main body by means of a left hand thread
thus preventing accidental detaching of the union during the operation of
attaching the union to the valve assembly.
The core housing and cap are recessed within the handle to prevent injury
to the service man.
EX-900B1-L
EX-900K
EX-1280A
EX-907N
EX-9005
EX-1287 1 x 9/16 Nylon Seal
EX-905S EX-900SR
SGB-901-LH
SGB-900S-L Components
SGB-900S-L
EX-95-ADK
SXL-901-LH EX-901-LH
SGB-901-LH
SUPER GIANT BORE
(
SGB
)
9
S
U
P
E
R

E
X
T
R
A

L
A
R
G
E

B
O
R
E

(
S
X
L
)
(
SXL
)
The SUPER EXTRA LARGE BORE, also known as SUPER XL (SXL) line of products
features a signicant improvement in ination time required to inate large OTR
tires. It reduces the ination time required by approximately 50% when compared
to the SUPER LARGE BORE.
The part numbers for this line of products have the prex SXL in front of each
number wherever possible.
SXL
--
1650
--
## Valve Assembly
Complete swivel valve assembly, including SXL-1050 core housing and a
SXL-1008 clamp-in spud. It is used primarily on tires 57 and 63 where
there is sufcient clearance between the wheel and drive mechanism.
For example a 36 assembly would be ordered as follows: SXL-1650-36
COMPLETE VALVE ASSEMBLI ES, FLEXI BLE EXTENSI ONS
SXL
--
1600
--
## Valve Assembly
Basically the same as SXL-1650, but without the SXL-1008 clamp-in spud.
When ordering you must specify the effective length required.
SXL
--
1800
--
Flexible extension only.
For example a 36 assembly would be ordered as follows: SXL-1800-36
SXL
--
1801
--
## Steel Braided Flexible Extension
Same as SXL-1800 except that it is made with STEEL BRAIDED hose featuring
a much better resistance to heat, abrasion as well as a much tighter bend
radius. Because of the heavier hose it requires heavy duty ttings and can
only be assembled in house. The ordering procedure is the same as others
meaning you must specify length required from end to end.
These extensions are primarily used where there is a tremendous amount of
heat generated related to long haul, high speed, heavy loads combined with
low clearance between drive/brake mechanisms and wheel assembly.
SXL-1010
SXL-1000
SXL-1030
SXL-1040
SXL-1008
SXL-1040 SXL-1075
SXL-1020
SXL-1000
EX-125
SXL-1050
L
SXL-1650
L
SXL-1600
L
SXL-1800
L
SXL-1801
S
U
P
E
R

E
X
T
R
A

L
A
R
G
E

B
O
R
E

(
S
X
L
)
(
SXL
)
RI GI D SWI VEL VALVE, ANGLE CONNECTORS, ASSEMBLI ES, LOADER VALVE, VALVE EXTENSI ONS
SXL
--
1700
--
## Rigid Swivel Valve Assembly
Rigid swivel valve assembly. Includes SXL-1050 core housing & 2 SXL-1000
jam nuts. It can be tted on SXL-1008, SXL-1008L and SXL-1009 spuds.
When ordering length, you should specify as per effective length.
Also available with SXL-1008 spud under part number SXL-1900-##.
SXL

Swivel Angle Connectors
All SXL swivel angle connectors t onto SXL rim spuds (SXL-1008, SXL-1008L,
SXL-1005 and SXL-1009). These swivel connectors are used to join the
exible extensions to the rim spuds. They are available in a variety of angles
as shown below:
SXL-1010 - 90 SXL-1012 - 85 SXL-1013 - 80
SXL-1014 - 75 SXL-1015 - 60
SXL
--
1500 Swivel Assembly
Swivel valve assembly consisting of SXL-1050 housing and SXL-1010
connector.
SXL
--
2000 Straight Assembly
Straight valve assembly, made up with SXL-1008 clamp-in spud and
SXL-1050 core housing. It can also be supplied with the SXL-1008L which is
the longer version of the SXL-1008 with 0.20 more height.
SXL
--
1007 Loader Valve
Loader Valve for SXL series.
SXL
--
930E Valve Extension
Komatsu 930E formed valve extension.
SXL
--
930E3 Valve Extension
Komatsu 930E3 formed valve extension.
SXL-1700
SXL-1010
SXL-1500
SXL-2000
SXL-1007
SXL-930E
SXL-930E3
L
11
S
U
P
E
R

E
X
T
R
A

L
A
R
G
E

B
O
R
E

(
S
X
L
)
(
SXL
)
ASSEMBLY TOOL, FLEXI BLE TUBI NG, SPUDS, CONNECTORS
SXL
--
1075 Flexible Tubing
Flexible tubing (5/8 ID) to make SXL exible extensions.
SXL
--
1008 Clamp-in Spud
Clamp-in spud to t into 13/16 rim valve hole. Can also be used in the
15/16 rim valve hole, providing the clamping nut is installed with the
recessed shoulder towards the rim which is designed to t into the rim hole
in order to center the spud properly. This spud will accept all of the SXL
swivel connectors as well as SXL-1050 core housing.
SXL
--
1008L Clamp-in Spud
Clamp-in spud offering same features as SXL-1008 except that it is 0.20
higher than the SXL-1008.
SXL
--
1005 Screw-in Spud
Screw-in spud for SXL swivel connectors. Fits into 1/2 NPT threaded
valve hole.
SXL
-
1009 Screw-in Spud
Screw-in spud for SXL swivel connectors. Fits into 3/4 NPT threaded
valve hole.
SXL
--
1006 Screw-in Connector
85 Screw-in connector ts into 1/2 NPT threaded valve hole.
SXL
--
1018 Screw-in Connector
85 Screw-in connector - ts into 3/4 NPT threaded valve hole.
SXL
--
1290 Assembly Tool
Tool to assemble exible extension in eld operation.
SXL-1290
SXL-1075
SXL-1008
SXL-1008L
SXL-1005
SXL-1009
SXL-1006
SXL-1018
S
U
P
E
R

E
X
T
R
A

L
A
R
G
E

B
O
R
E

(
S
X
L
)
(
SXL
)
CORE HOUSI NG, JAM NUTS, SWI VEL CONNECTORS, SLEEVES, ASSEMBLY KI TS
SXL
--
1000 Jam Nuts
Jam nut used on various SXL components.
SXL
--
Straight connector used to make various SXL exible extensions.
SXL
--
1030 Swivel Connector
Swivel connector used to make various SXL exible extensions. Attaches to
various SXL angle connectors.
SXL
--
1040 Sleeves
Sleeve used to retain the tubing onto the barb ttings of the exible
extensions.
SXL
--
1050 Core Housing
Core housing used with the SXL angle connectors, exible extensions and
various spuds.
SXL
--
1400K Flexible Extension Assembly Kit
extensions:
1 each of SXL-1050, SXL-1020, SXL-1030
2 each of SXL-1000, SXL-1040
SXL
--
extensions:
SXL-1000
SXL-1020
SXL-1030
SXL-1040
SXL-1050
13
S
U
P
E
R

E
X
T
R
A

L
A
R
G
E

B
O
R
E

(
S
X
L
)
(
SXL
)
I NFLATOR ADAPTORS
SXL
--
900S
--
L Inator Adaptor
Inator adaptor for SXL line of products. Allows faster ination/deation
to the service man.
EX-900B1-L
EX-900K
EX-1280A
EX-907N
EX-900S/1
EX-905S EX-900SR
SXL-901-LH
SXL-900S-L Components
SXL-900S-L
EX
--
95
--
ADK Inator Adaptor
Inator adaptor with same features as SXL-900S-L but can be used for any of
EX-95-ADK
SGB-901-LH EX-901-LH
SXL-901-LH
S
U
P
E
R

L
A
R
G
E

B
O
R
E

(
S
L
B
)
SUPER LARGE BORE
(
SLB
)
VALVE ASSEMBLI ES, FLEXI BLE EXTENSI ONS
SUPER LARGE BORE
The SUPER LARGE BORE was the rst improvement over the LARGE BORE system.
Introduced during the early 1970s, it offers a vast improvement in ination time
required to inate the larger tires being introduced to the market at that time.
It is still the most popular of the larger bores available today; however it requires
the use of a special inator to fully take advantage of the larger bore.
EXM
--
1950
--
## Valve Assembly
Complete swivel valve assembly including EXR-520 core housing and EXT-81
clamp-in spud. It is primarily used on tires sizes up to 57. When ordering
you must specify effective length required which is measured from the center
of the swivel connector to the end of the core housing. For example a 36
valve should be ordered as follows: EXM-1950-36
EXM
--
1900
--
## Valve Assembly
Basically the same as EXM-1950 but supplied without the clamp-in spud.
When ordering you must specify the effective length required.
L
EXM-1950
EXR-525
EXB-222
EXR-762S
EXR-764R
EXT-81
EXR-764R EXR-760
EXR-763
EXB-222
EX-127
EXR-520
EXM-1900
L
EXM
--
3000
--
Flexible extension only used to make up the EXM-1900 series assemblies.
When ordering you must specify effective length required which is measured
from end to end.
EXM
--
3000HD
--
Same as EXM-3000 except it is made with STEEL BRAIDED HOSE featuring
better resistance to heat, friction and kinking. These heavy duty extensions
can be reused time and again thus reducing the end cost. When ordering
you must specify effective length required which is measured from end to end.
EXM-3000
L
EXM-3000HD
L
15
S
U
P
E
R

L
A
R
G
E

B
O
R
E

(
S
L
B
)
SUPER LARGE BORE
(
SLB
)
FLEXI BLE EXTENSI ONS, DOUBLE SPUD VALVE ASSEMBLY, RI GI D SWI VEL VALVE ASSEMBLI ES
EXDS
--
296
--
## Valve Assembly
Super large bore double spud valve assembly. Designed for applications
where clearance space is critical. Valve height above the rim is only 0.875.
Assembly consists of either EXDS-210 clamp-in type spud or EXDS-210P
NPT screw-in spud, EXDS-215 plug, EXM-4000 extension and EXR-520 core
housing.
When ordering you must specify effective length required which is measured
from the middle of the double spud to the end of the core housing. For
example for a 29 assembly you would order EXDS-296-29.
EXDS-296
L
EXMR
--
800
--
## Rigid Swivel Valve
Rigid swivel valve assembly. Includes EXR-520 core housing & 2 EXB-222
jam nuts. It can be tted on EXT-81, EXT-82 and EXC-100 spuds.
Also available with EXT-81 clamp-in spud under part number EXMR-850-##.
EXMR-800
L
EX
--
1239 Rigid Swivel Valve Assembly
Complete rigid swivel valve assembly for CAT-793, delivered with EXR-520
core housing but without rim spud. Will t onto EXT-81, EXT-82 & EXC-100
rim spuds.
EX-1239
L
EXDS
--
226 Connector
Straight barb connector for EXM-4000 series extensions.
EXDS-226
EXM
--
4000
--
Flexible extension used to make up EXDS-296 series assemblies. When
ordering you must supply effective length required which is measured from
end to end. For example for 29 assembly you would order EXM-4000-29.
EXM
--
4000HD
--
Same as EXM-4000 except that it is made with STEEL BRAIDED HOSE
featuring better resistance to heat, friction and kinking. These heavy duty
extensions can be reused time and again. Ordering procedure is the same
as that of the EXM-4000.
EXM-4000
L
EXM-4000HD
L
EXMR
--
890
--
## Rigid Turret Valve Assembly
Turret type super large bore rigid valve assembly. Fit into 13/16 rim valve
hole. Supplied with heat resistant Viton grommet.
EX
--
117
--
0764 Rigid Turret Valve Assembly
Super large bore turret type valves for Caterpillar 980D medium wheel
loaders. They are completely produced with brass material for longer life
where calcium chloride type ballast is used. They are also supplied with
heat resistant Viton grommet.
S
U
P
E
R

L
A
R
G
E

B
O
R
E

(
S
L
B
)
SUPER LARGE BORE
(
SLB
)
RI GI D TURRET VALVE ASSEMBLI ES, FLEXI BLE TUBI NG, ASSEMBLY TOOL
EX
--
144
--
Super large bore turret type valves for Caterpillar 988G large wheel
EX
--
146
--
Super large bore turret type valves for Caterpillar 980G medium wheel
EX-117- 0764
EX-144- 0290
EX-146- 6779
EXMR-890
L
EXR
--
760 Flexible Tubing
Flexible tubing used to make up the SUPER LARGE BORE exible extensions.
EXR
--
760HD Heavy Duty Flexible Tubing
Steel braided hose to make up SUPER LARGE BORE exible extensions for
use in extreme conditions such as heat, friction and/or collapsing/kinking.
Because of the superior quality of the hose, these extensions can be reused
time and again.
EXR-760
EXR-760HD
EX
--
990 Assembly Tool
Tool to assemble exible extension in eld operation.
EX-990
17
EXR
--
520 Core Housing
Core housing supplied with heat resistant core and 90 duro O-ring.
EXB
--
222 Jam Nuts
Jam nut used on EXT-81 & EXT-82 spuds as well as exible extensions.
EXR
---
762S Swivel Connector
Swivel connector used to make up the various SLB exible extensions.
EXR
--
Straight connector used to make up the various SLB exible extensions.
EXR
--
764R Sleeves
Sleeve used to retain the hose onto the SLB barb ttings.
EXR
--
extensions:
1 each of EXR-520, EXR762S, EXR-763
2 each of EXR-764R, EXB-222
EXR
--
969K1 Flexible Extension Assembly Kit
extensions:
1 each of EXR762S, EXR-763
2 each of EXR-764R, EXB-222
S
U
P
E
R

L
A
R
G
E

B
O
R
E

(
S
L
B
)
SUPER LARGE BORE
(
SLB
)
CORE HOUSI NG, JAM NUTS, SWI VEL CONNECTORS, SLEEVES, ASSEMBLY KI TS
EXR-520
EXB-222
EXR-762S
EXR-763
EXR-764R
EXR
--
521 Core Housing
Core housing to be used with EXC-200 spud.
EXM
--
Straight valve assembly used mostly on scrapers having a threaded rim
valve hole of 3/4-16 thread and an O-ring seal. It consists of EXC-200
spud and EXR-521 core housing.
EXM
--
Straight valve assembly consisting of EXT-81 clamp-in spud & EXR-520.
EXM
--
90 Swivel valve assembly consisting of EXR-525 swivel connector and
EXR-520 core housing.
EXR
--
625 (TR-CH16) Core Housing
Air liquid core housing to be used with EXT-81, EXC-100 rim spuds.
EXR
--
626 Core Housing Assembly
Straight air liquid valve assembly, consisting of EXR-625 and EXT-81.
S
U
P
E
R

L
A
R
G
E

B
O
R
E

(
S
L
B
)
SUPER LARGE BORE
(
SLB
)
CORE HOUSI NGS, VALVE ASSEMBLI ES, OUTSI DE- I N SPUD, LOADER VALVE
EXX
--
381 Outside-In Spud
Outside-in spud intended for emergency temporary replacement only.
NOT RECOMMENDED FOR PERMANENT INSTALLATION.
EXT
--
999 Loader Valve
Loader dozer valve ts into 11/16-12 threaded valve hole with O-ring seal.
Accepts EXR-520 and other SUPER LARGE BORE ttings.
EXR-521
EXM-1000
EXM-1870
EXM-2000
EXR- 625
EXR- 626
EXX-381
EXT-999
19
S
U
P
E
R

L
A
R
G
E

B
O
R
E

(
S
L
B
)
SUPER LARGE BORE
(
SLB
)
SCREW- I N ANGLE SPUDS, CLAMP- I N CONNECTOR, SWI VEL ANGLE CONNECTORS
EXS
--
75 Screw-in Angle Spud
75 Angle screw-in spud for use where the rim valve hole is a 1/2 NPT
thread.
EXS
--
75D Screw-in Angle Spud
Same as EXS-75 but has additional seal in the form of locking nut with Teon
seal.
EXS
--
85/1 Screw-in Angle Spud
thread.
EXT
--
85 Clamp-in Connector
85 Clamp-in connector for application for a 13/16 rim valve hole.
SLB

Swivel Angle Connectors
All SLB swivel angle connectors t onto SLB rim spuds (EXT-81, EXT-82,
EXC-100, EXC-155, EXX-381). These swivel connectors are used to join the
exible extensions to the rim spuds. They are available in a variety of angles
as shown below:
EXR-525 - 90 EXR-685 - 85 EXR-680 - 80
EXR-675 - 75 EXR-670 - 70 EXR-660 - 60
EXS
--
85 Screw-in Angle Spud
thread.
EXS
--
85D Screw-in Angle Spud
Same as EXS-85 but has additional seal in the form of locking nut with Teon
seal.
EXS-85
EXS-85D
EXS-75
EXS-75D
EXS-85/1
EXT-85
EXR-525
S
U
P
E
R

L
A
R
G
E

B
O
R
E

(
S
L
B
)
SUPER LARGE BORE
(
SLB
)
SPUDS
EXT
--
81 (TR-SP8) Spud
Clamp-in spud ts into 13/16 rim valve hole. Supplied with heat resistant
Viton grommet.
EXT
--
82 Spud
Same as EXT-81 except it offers an additional 9/32 height. Supplied with
EXC
--
100 (TR-SP9) Spud
Screw-in spud ts into rim valve hole of 1/2 NPT.
EXC
--
155 Spud
Same as EXC-100 but without internal thread.
EXC
--
120 Spud
Screw-in spud ts into 3/4 NPT threaded rim valve hole.
EXC
--
200 Spud
Screw-in spud for threaded rim valve hole of 3/4-16 straight thread.
Equipped with O-ring seal. Used with EXR-521 core housing.
EXDS
--
210 Spud
Clamp-in double end spud to t into rim valve hole of 13/16 supplied with
EXDS
--
210P Spud
Screw-in double end spud to t into threaded rim valve hole of 1/2 NPT.
EXDS-210
EXDS-210P
EXT-81
EXT-82
EXC-100
EXC-120
EXC-200
21
S
U
P
E
R

L
A
R
G
E

B
O
R
E

(
S
L
B
)
SUPER LARGE BORE
(
SLB
)
PLUG, VALVE CAP, ASSEMBLY TOOL, SWI VEL VALVE, CUSTOM VALVES
EX
--
445 Valve Cap
Super Large Bore valve cap. Protects threads on the exible extensions as
well as the complete EXR-520 core housing.
Custom Valves
EXACTRA has the ability to produce various custom formed valves.
Please contact us for your specic requirements.
EX
--
789
--
0 Formed Valve
Formed swivel valve assembly for CAT-789, delivered without core housing
and spud. Will t onto EXT-81, EXT-82 & EXC-100 rim spuds
EX
--
9002 (Short) / EX
-
9004 (Long) Valves
Special formed Super Large Bore valves designed specically for TEREX
trucks such as 33-15
EX-445
EX-789- 0
EX-9002
EXDS
--
215 Plug
Plug for EXDS-210 series double spuds.
EXDS-215
S
U
P
E
R

L
A
R
G
E

B
O
R
E

(
S
L
B
)
SUPER LARGE BORE
(
SLB
)
I NFLATOR ADAPTORS
EX
--
900S
--
L Inator Adaptor
Inator adaptor for SLB line of products. Allows faster ination and deation
to the service man.
EX-900B1-L
EX-900K
EX-1280A
EX-907N
EX-900S/1
EX-905S EX-900SR
EX-901-LH
EX-900S-L Components
EX-900S-L
EX
--
95
--
ADK Inator Adaptor
Inator adaptor with same features as EX-900S-L but can be used for any of
EX-95-ADK
SGB-901-LH SXL-901-LH
EX-901-LH
23
L
A
R
G
E

B
O
R
E

(
L
B
)
LARGE BORE
(
LB
)
SI NGLE- BEND SWI VEL VALVES
EXACTRA
NUMBER
TR #
BEND
ANGLE
LENGTH HEIGHT
INCHES MM INCHES MM
EX-52-2 25 2 50.8 1 1/16 27.0
EX-54- 6 90 6 152.4 2 3/8 60.3
EX-58-2-1/2 60 2 1/2 62.7 2 1/8 54.0
EXJ- 650 J- 650 80 3 1/8 79.4 1 5/64 27.7
EXJ- 651 J- 651 90 4 11/16 119.0 1 17/64 32.1
EXJ- 652 J- 652 86 5 1/2 139.7 1 5/64 27.4
EXJ- 653 J- 653 80 2 1/2 62.7 1 5/64 27.4
EXJ- 654 J- 654 60 3 1/8 79.4 1 5/64 27.4
EXJ- 655 J- 655 74 3 1/8 79.4 1 5/64 27.4
EXJ- 656 J- 656 90 3 11/16 93.7 2 5/8 66.7
EXJ- 657 J- 657 80 4 101.6 1 5/64 27.4
EXJ- 658 J- 658 80 5 1/2 139.7 1 5/64 27.4
EXJ- 659 J- 659 90 3 1/2 88.9 1 57/64 50.4
EXJ- 660 J- 660 90 8 3/4 222.3 1 57/64 50.4
EXJ- 668 J- 668 90 4 11/16 119.0 5 1/8 130.2
EXJ- 669 J- 669 90 2 1/2 62.7 1 5/64 27.4
EX-3101/1 80 4 1/2 114.3 1 5/64 27.4
EX-3110/1 80 9 228.6 1 5/64 27.4
EXJ-4002.5 J-4000-2 1/2 90 2 1/2 62.7 1 5/64 27.4
EXJ-4003 J-4003 90 3 75.2 1 5/64 27.4
EXJ-4004 J-4000-4 90 4 101.6 1 5/64 27.4
EXJ-4004.5 J-4000-4 1/2 90 4 1/2 114.3 1 5/64 27.4
EXJ-4005 J-4000-5 90 5 127.0 1 5/64 27.4
EXJ-4006 J-4000- 6 90 6 152.4 1 5/64 27.4
EXJ-4007.5 J-4000-7 1/2 90 7 1/2 190.5 1 5/64 27.4
EXJ-4008 J-4000-8 90 8 203.2 1 5/64 27.4
EXJ-4009 J-4000-9 90 9 228.6 1 5/64 27.4
EXJ-4010 J-4000-10 90 10 254.0 1 5/64 27.4
EXJ-4010.5 J-4000-10 1/2 90 10 1/2 266.7 1 5/64 27.4
EXJ-4011 J-4000-11 90 11 279.4 1 5/64 27.4
EXJ-4012 J-4000-12 90 12 304.8 1 5/64 27.4
EXJ-4013 J-4000-13 90 13 330.2 1 5/64 27.4
EXJ-4016 J-4000-16 90 16 406.4 1 5/64 27.4
EXJ-4024 J-4000-24 90 24 609.6 1 5/64 27.4
EXJ-4028 J-4000-28 90 28 711.2 1 5/64 27.4
EXJ-4029.5 J-4000-29 1/2 90 29 1/2 749.3 1 5/64 27.4
EXJ-4030 J-4000-30 90 30 762.0 1 5/64 27.4
EXJ-4032 J-4000-32 90 32 812.8 1 5/64 27.4
EXJ-4036 J-4000-36 90 36 914.4 1 5/64 27.4
Single-Bend Swivel Valves
The LARGE BORE system is primarily used on tire sizes up to 49 and although it does not
require any type of ination adaptor, it is still most popular on the smaller OTR tires such as
those on graders and small loaders or where clearance does not allow for the larger bores to
be used.
The Large Bore valves listed on this chart represent only the most popular ones in use. Basically
these can be made in any length required as well as various congurations. You should always
use the proper valve for the application. The bend on these valves should never be altered
to suit an application. The principle of one size ts all does not apply to these valves. If you
require a specic bend in a valve please mention so when ordering.
All valves come with heat resistant core and hex cap. On lengths over six inches two lock nuts
are furnished. All valves of 4-1/2 or larger in length are supplied with a rubber protection
sleeve on the stem. These valves are produced to the T.R.A. specications where such
specications exist otherwise they are produced on customers specications.
All Large Bore swivel valves can be used with any of the rim spuds shown on page 27 of this
catalogue.
EXJ- 650 H
L
EXJ-4006
L
H
L
A
R
G
E

B
O
R
E

(
S
G
B
)
LARGE BORE
(
LB
)
MULTI PLE- BEND SWI VEL VALVES, TURRET VALVES
Multiple-Bend Swivel Valves
EXACTRA # TR # A B C D W X Y Z
EXJ- 662 J- 662 14.00 4.50 5.87 20 20 90
EXJ- 663 J- 663 25.00 2.00 6.00 8 8 90
EXJ- 665 J- 665 32.00 2.00 5.94 13 13 90
EXJ- 666 J- 666 3.28 20.12 4.38 6.22 31 31 6 84
EXJ-5013 3.50 14.00 4.50 6.50 30 30 5 85
EXJ- 661 J- 661 4.50 1.88 8 82
EXJ- 664 J- 664 8.75 4.00 13 90
EXJ- 667 J- 667 7.50 3.00 11 90
Turret Valves
The turret type Large Bore valves are primarily used on planetary gear wheels. However they
can also be used on a variety of other applications, such as where low clearance does not
allow for use of a swivel valve & spud. They are produced to the T.R.A. specications and can
also be produced to customers specications. They are designed for use in a standard rim
valve hole of 13/16 diameter. These valves with length of 10 or longer should be anchored
to the rim.
EXACTRA # TR # A B C D Y Z
EXJ- 690 J- 690 1.25 4.69 2.31 0.56 28 28
EXJ- 690B 0.75 3.75 1.75 0.56 28 28
EXJ- 690B1 0.75 3.00 1.20 0.40 28 28
EXJ- 690/A 0.75 5.00 2.88 0.625 16 16
EXJ- 690/7 3.50 7.00 4.83 0.56 28 28
EXJ- 690/8 2.00 8.00 3.33 0.56 28 28
EXJ- 691 J- 691 0.62 3.31 18
EXJ- 691-2 0.65 2.65 18
EXJ- 691B 0.62 8.50 18
EXJ- 692 J- 692 1.25 4.69 2.31 0.56 18 28
EXJ- 693 J- 693 0.88 5.00 1.69 1.00 45 45
EXJ- 694 J- 694 0.78 3.50 28
EXJ- 695 J- 695 0.81 4.12 2.19 1.00 50 50
EXJ- 696 J- 696 1.06 4.25 2.06 0.91 42 42
EXJ- 697 5.50 3.50 25
y
z
B
C
A
D
z
B
A
C
D
w
x
y
25
S
U
P
E
R

G
I
A
N
T

B
O
R
E

(
S
G
B
)
LARGE BORE
(
LB
)
REPAI R VALVES, HI GH BEND VALVES, LOADER VALVE, TANK VALVE
Screw-On Repair Valves
The Large Bore Screw-On Repair Valve is intended for use on tube type
tires and screws onto an SP-1000 tube type spud having threads .482-26
(TR-12V1).
These valves are produced to the T.R.A. specications, but can also be
produced to a customers specications.
EXACTRA
NUMBER
TR # ANGLE
HEIGHT LENGTH
INCHES MM INCHES MM
EX-1264 J-1078A STRAIGHT 5.780 146.8
EX-1265 J-1078C 90 1.125 28.58 4.825 122.55
EX-1266 J-1076E 88 1.375 34.93 3 76.2
EX-1267 J-1076B 86 1.125 28.58 3.25 82.55
EX-1268 J-1076A STRAIGHT 4.16 105.66
EX-1269 J-1076D 90 2.06 52.32 2.31 58.67
EX-1270 J-1014 STRAIGHT 1.91 48.51
EX-1271 J-1076C 90 1.5 3.81 2.825 71.75
EX-1272 J-1078B 82 1.375 34.93 4.625 117.47
EX-1273 J-1175C 88 1.375 34.93 4.125 104.77
EX-1274 J-1177A STRAIGHT 4.5 114.3
EX-1275 J-1179B 88 1.37 34.93 5.25 133.35
EX-1276 J-1178A STRAIGHT 5.28 134.11
EX-1277 J-1175B 82 1.25 31.75 4.25 107.95
EX-1278 J-1179A STRAIGHT 6.4 162.7
Large Radius High Bend Air Valves
These High Bend valves are used primarily on loaders & dozers where liquid
is used as ballast. In order to ensure long life these valves are produced with
all brass material. They are supplied with heat resistant core and hex valve
cap. The spud is not included.
EXACTRA
NUMBER
ANGLE
HEIGHT LENGTH
INCHES MM INCHES MM
EX-HBS 11 90 11 279.4 1 29/32 48.3
EX-HBS 5 1/2 90 5 1/2 139.7 2 1/16 52.4
EXT
--
670 Loader/Dozer Valve
Loader dozer tire valve, ts thread 1 1/16-12. Delivered complete with heat
resistant core, hex cap and O-ring seal.
EX
--
6047 Tank Valve
Large Bore tank valve with 1/4 NPT thread.
EXT- 670
EX- 6047
EX-1273
ANGLE
L
H
EX-1270
H
EX-HBS 5 1/2 H
L
L
A
R
G
E

B
O
R
E

(
L
B
)
LARGE BORE
(
LB
)
SPECI AL FORMED VALVES
Special Formed Valves
These valves are supplied with heat resistant core and hex cap. These valves
are intended as replacement market for Caterpillar trucks. Contact EXACTRA
for application guidance.
EXACTRA
NUMBER
DESCRIPTION BENDS
LENGTH
INCHES MM
EX-231-5112 Extension 4 28 711.2
EX-272-7940 Extension 4 15 381
EX-272-7948VC Valve 4 21 533.4
EX-272-7949VC Valve 4 29 736.6
EXD- 0585EC Extension 4 17 5/16 439.67
EXD-5008EC Extension 4 17 13/16 452.37
EXD-7103EC Extension 4 16 1/4 412.75
EXD-7948EC Extension 4 21 533.4
EXD-7949EC Extension 4 29 736.6
EXD-8262EC Extension 6 30 762
EXD-9903EC Extension 4 16 7/8 428.75
EXG- 0570VC Valve 5 19 31/32 507.23
EXG-1450VC Valve 5 32 7/8 835.15
EXG-4985VC Valve 4 19 3/4 501.65
EXG-5200VC Valve 5 27 685.8
EXG-5410VC Valve 5 31 9/16 801.62
EXG-5420VC Valve 5 33 838.2
EXG-8018VC Valve 4 26 3/4 679.45
EXG-8019VC Valve 1 8 203.2
EXG-9440VC Valve 5 27 685.8
EXG-9470VC Valve 5 31 1/2 800.1
EX-231-5112
EXD-7103EC
EXG-8019VC
EXG- 0570VC
EXG-4985VC
EXG-8018VC
EXD-7949VC
27
L
A
R
G
E

B
O
R
E

(
L
B
)
LARGE BORE
(
LB
)
RI M SPUD, SCREW- I N SPUD, OUTSI DE- I N SPUD, HOLE PLUG, ADAPTORS
EX
--
1302 Tubeless Rim Spud
Tubeless rim spud ts into 13/16 rim valve hole. This spud features a
heavier than standard base to allow for a better grip for the tire tter.
Delivered with heat resistant Viton grommet. Will accept all of the large
bore swivel valves.
EXC
--
10 Screw-in Spud
Screw-in spud to t into NPT threaded rim valve hole. Will accept
all of the large bore swivel valves.
EX
--
1305 Outside-in Spud
Outside-in tubeless spud to t 13/16 rim valve hole. Will accept all of the
large bore swivel valves. This spud is intended for emergency temporary
replacement only. NOT RECOMMENDED FOR PERMANENT INSTALLATION.
EX
--
1300 Rim Hole Plug
Rim valve hole plug for 13/16 rim hole.
EXH
--
4000 Standard to Large Bore Adaptor
Adaptor to convert tubes with SP-1000 spud to accept Large Bore swivel
valves.
EXH
--
4000/1 Standard to Large Bore Adaptor
Same as EXH-4000 but without bridge washer and nut.
EX
--
1285 Adaptor (Female)
Female type adaptor to convert large bore to standard bore. Fits .482-26
threads.
EX
--
AD1 Adaptor (Male)
Male type adapter to convert large bore to standard bore. Fits .302-32
thread.
EX-1302
EXC-10
EX-1305
EX-1300
EXH-4000
EXH-4000/1
EX-1285
EX-AD1
L
A
R
G
E

B
O
R
E

(
L
B
)
LARGE BORE
(
LB
)
STRAI GHT VALVES, CAPS, LONG & SHORT VALVE CORES
EX
--
1281 Screwdriver Type Cap
Screwdriver type cap (TR-VC-6) ts .482-26 valve threads.
EX
--
1283 Hex Cap
Hex head cap (TR-VC-7) ts .482-26 valve threads.
EX
--
1283P Plastic Hex Cap
Black, sturdy, plastic hex head valve cap. Fits .482-26 valve threads.
EX
--
1284 Fork Cap
Valve cap for EX-1285 reducer. Fits .302-32 valve threads. Fork head can
be used to remove/insert large bore cores.
EX
--
1287 Dome Cap
Dome valve cap ts .482-26 valve thread.
EX
--
1280 Valve Core (Long)
Heat resistant, long valve core (TR-C-2). Fits all large bore valves.
EX
--
1280A Valve Core (Short)
Heat resistant, short, valve core (TR-C1) to t all large bore valves. The
body of this core is made of two parts so as to not damage/dislodge
the red band seal during installation.
EX
--
3150 Straight Valve with Spud
Straight valve with EX-1302 (TR-SP2) spud, heat resistant core and
screwdriver cap. Fits into rim valve hole 13/16.
EX
--
3150
/
1 Straight Valve (No Spud)
Straight valve complete with heat resistant core and screwdriver cap. Fits
into any of the large bore spuds shown on page 27 of this catalogue.
EX-3150
EX-3150/1
EX-1281
EX-1283
EX-1283P
EX-1284
EX-1287
EX-1280
EX-1280A
29
L
A
R
G
E

B
O
R
E

(
L
B
)
LARGE BORE
(
LB
)
RI GI D EXTENSI ONS, HAND BENDABLE EXTENSI ONS, FLEXI BLE EXTENSI ONS
Rigid Extensions
These extensions are made of brass and are used where tment can be done
in a straight line with valve. Care must be taken not to bend these extensions
as it would impede the function of the deector pin. They are delivered with
hex cap and 2 lock nuts on extensions over 4 inches. Listed are most popular
sizes. Other lengths are available upon request.
EXACTRA
NUMBER
LENGTH
INCHES MM
EX-2002 2 50.8
EX-2003 3 76.2
EX-2004 4 101.6
EX-2005 5 127.0
EX-2006 6 152.4
EX-2007 7 177.8
EX-2008 8 203.2
EXACTRA
NUMBER
LENGTH
INCHES MM
EX-2009 9 228.6
EX-2010 10 254.0
EX-2011 11 279.4
EX-2012 12 304.8
EX2013 13 330.2
EX-2014 14 355.6
EX-2015 15 381.0
EXACTRA
NUMBER
LENGTH
INCHES MM
EX-2016 16 406.4
EX-2017 17 431.8
EX-2018 18 457.2
EX-2019 19 482.6
EX-2020 20 508.0
Hand Bendable Extensions
These extensions can be hand bent for use where a straight on extension
cannot be used. They are furnished with 2 lock nuts and a sealing nut. As the
cap and core from the valve have to be removed, they are then transferred
to the extension. These extensions should be anchored to the rim. Listed are
most popular sizes. Other lengths are available upon request.
EXACTRA
NUMBER
LENGTH
INCHES MM
EX-3003 3 76.2
EX-3004 4 101.6
EX-3005 5 127.0
EX-3006 6 152.4
EX-3007 7 177.8
EX-3008 8 203.2
EXACTRA
NUMBER
LENGTH
INCHES MM
EX-3009 9 228.6
EX-3010 10 254.0
EX-3011 11 279.4
EX-3012 12 304.8
EX-3013 13 330.2
EX-3014 14 355.6
EXACTRA
NUMBER
LENGTH
INCHES MM
EX-3015 15 381.0
EX-3016 16 406.4
EX-3017 17 431.8
EX-3018 18 457.2
EX-3019 19 482.6
EX-3020 20 508
Flexible Extensions
These extensions are made with steel-braided, hydraulic type hose and
reusable ttings. They are furnished with hex cap, heat resistant core, 2 lock
nuts, and a sealing nut. Listed are most popular sizes. Other lengths are
available upon request.
The hose can also be ordered separately under part# EX-6000H-SB.
EXACTRA
NUMBER
LENGTH
INCHES MM
EX- 6005 5 127.0
EX- 6006 6 152.4
EX- 6007 7 177.8
EX- 6008 8 203.2
EX- 6009 9 228.6
EX- 6010 10 254.0
EXACTRA
NUMBER
LENGTH
INCHES MM
EX- 6011 11 279.4
EX- 6012 12 304.8
EX- 6013 13 330.2
EX- 6014 14 355.6
EX- 6015 15 381.0
EX- 6016 16 406.4
EXACTRA
NUMBER
LENGTH
INCHES MM
EX- 6017 17 431.8
EX- 6018 18 457.2
EX- 6019 19 482.6
EX- 6020 20 508.0
EX
-
6000K Kit
The kit includes the following:
1 ea EX-6000M, 1 ea EX-6000S,
2 ea EX-6000F, 2 ea EX-HN1 and
1 ea EX-3000N, 1 ea EX3000WT
EX-2006
EX-3006
EX- 6006HD
EX- 6000H-SB
T
R
A
C
T
O
R
/
G
R
A
D
E
R

&

S
M
A
L
L

L
O
A
D
E
R
S
AI R WATER VALVES, AI R WATER VALVE EXTENSI ONS
EX
--
670 Straight Air Water Valve
(TR-618A) Straight air water valve primarily used on farm equipment but
also widely used on graders and small loaders. The removal of the CH-3
core housing is done with the use of the EX-700 liquid ll tool which allows
for fast lling of tire with liquid ballast.
EXACTRA
NUMBER
TR # ANGLE
A B HOLE
INCHES MM INCHES MM INCHES MM
EX- 670 TR- 618A 1 7/8 47.6 0.625 15.9
EX- 670R TR- 618AR 1 7/8 47.6 0.625 15.9
EX- 672 TR- 622A 90 1 3/4 44.5 4 1/2 114.3 0.625 15.9
EX- 678 TR- 623A 65 1 1/2 38.1 2 1/4 57.2 0.625 15.9
EX- 679 TR- 621A 65 1 1/2 38.1 3 76.2 0.625 15.9
EX
--
670R Straight Air Water Valve
(TR-618AR) Same application as that of EX-670 except it is a rubber snap-in
type and offers same advantages as that of the EX-670. Maximum cold
ination pressure 65 PSI.
EX
--
672 Air Water Valve
(TR-622A) Suitable for similar application to that of the EX-670 but with
a 90 bend and an effective length of 4 1/2.
EX
---
678 Air Water Valve
a 65 bend and an effective length of 2 1/4.
EX
---
679 Air Water Valve
a 65 bend and an effective length of 3.
EX
---
5905 Air Water Valve Extension
90 Extension to facilitate access to EX-670 in some specic applications.
EX- 670
EX- 670R
EX- 672
EX- 678
EX- 679
EX-5905
B
A
31
T
R
A
C
T
O
R
/
G
R
A
D
E
R

&

S
M
A
L
L

L
O
A
D
E
R
S
AI R WATER ASSEMBLY, CORE HOUSI NGS, RI M HOLE PLUG, BRASS/CHROME VALVES, RI M NUTS
EX
--
CH1 Core Housing
(TR-CH1) Air water core housing to t old style TR-218A & TR-220A.
EXR
--
625 Core Housing
Super Large Bore air water core housing. Fits EXT-81 (TR-SP8) spud.
EXR
--
626 Air Water Valve Assembly
Super Large Bore air water valve assembly. Consists of EXR-625 core housing
and EXT-81(TR-SP8) spud.
JF
--
944B Brass Valve
Tractor front wheel valve in brass nish.
EX
--
670P Rim Valve Hole Plug
Rim valve hole plug for 5/8 hole.
EX
--
683A Core Housing
(TR-CH3) Air water core housing. Fits all air water valves except the Super
Large Bore.
JF
--
944N Chrome Valve
Same as JF-944B except in chrome nish.
EX
--
LN10 Plastic Rim Nut
Plastic rim nut for TR-218A & TR-220A tube valves.
EX
--
LN10B Brass Rim Nut
Brass rim nut for TR-218A & TR-220A tube valves.
EXR- 626
EX-670P
EX- 683A
EX-CH1
EXR- 625
JF-944B
EX-LN10
EX-LN10B
T
R
A
C
T
O
R
/
G
R
A
D
E
R

&

S
M
A
L
L

L
O
A
D
E
R
S
TANK VALVES, LI QUI D FI LL TOOL
EX
--
700 Liquid Fill Tool
Liquid ll tool with 1/2 female NPT thread to attach to any liquid ll systems.
It will extract the air water core housing, or the core only in both the Standard
and Large Bores to allow for faster lling of the tire.
The components are interchangeable with other similar products.
EXACTRA
NUMBER
THREAD
LENGTH
BORE
INCHES MM
EX-400 1/4 NPT 1 15/16 49.2 Standard
EX-401 1/8 NPT 27/32 21.4 Standard
EX-402 1/8 NPT 1 5/16 33.3 Standard
EX- 6047 1/4 NPT 1 19/32 40.5 Large
Tank Valves
Tank valves are used on a great variety of applications, but predominantly
on pressure containers where gauging & servicing is required.
EX-400 EX-401 EX-402 EX- 6047
EX-700SN1
EX-700S1
EX-700D
EX-700C
012 EX-700M
EX-700B1
EX-700Y
011
EX-700K
EX-700TW
EX-700G
EX-700DN
EX-700 Components
EX-700
33
T
R
U
C
K

&

B
U
S

V
A
L
V
E
S
TRUCK & BUS VALVES
TR570 SERI ES VALVES, O- RI NG SERI ES VALVES
EXACTRA
NUMBER
TR #
LENGTH VALVE HOLE
INCHES MM INCHES MM
EX-1223R 2 50.8 .625 15.9
EX-1296 575 1 1/8 28.6 .625 15.9
EX-1296A 501 1 1/2 31.8 .625 15.9
EX-1296B 500 2 50.8 .625 15.9
EX-1296C 570 3 1/8 79.4 .625 15.9
EX-1296D 571 3 3/8 85.7 .625 15.9
EX-1296E 572 3 3/4 95.3 .625 15.9
EX-1296F 573 4 1/2 114.3 .625 15.9
EX-1296G 574 5 127 .625 15.9
EX-1296H 501 oval 1 1/8 28.6 .625 15.9
EX-1296C
EX
--
1296 (TR570) Series Valves
These truck valves are primarily for highway type tire applications. They are
available with standard grommet and heat resistant valve core. They can be
supplied with RED silicone grommet (EX-570GS). They can also be supplied
with various bend angles.
EX
--
1298 Series Valves
These valves are primarily used where heat is a problem on applications
such as buses in city operations where there are many stop & go, as well as
low prole restricting the ow of cooling air. The prerequisite for these valves
is that the surface where the O-ring seats must be clean and free of nicks &
burrs.
EX
--
540 Series O-Ring Seal Valves
These valves are primarily for Alcoa type wheels and t into a .389 valve
hole. These EXACTRA valves feature a HEX type valve hole in the base so as
to allow the service personnel to use an allen key to hold the valve in proper
position during tting. Red Silicone Grommet available (part # EXRG-60).
EXACTRA
NUMBER
TR # BEND
A B
INCHES MM INCHES MM
EX-542 542 1.25 31.8
EX-543 543 2.40 60.9
EX-543C 543C 45 0.93 23.6 1.43 36.3
EX-543D 543D 60 0.98 24.9 1.38 35.0
EX-544D 544D 60 0.98 24.9 1.94 49.3
EX-545B 545B 26 1.38 35.0 2.20 55.9
EX-545D 545D 60 0.98 24.9 2.60 66.0
EX-546D 546D 60 0.98 24.9 3.35 85.1
EX-547D 547D 60 0.98 24.9 3.78 96.0
EX-1298C
EX-540 series HEX base
EX-545D
B
A
EXACTRA
NUMBER
TR #
LENGTH VALVE HOLE
INCHES MM INCHES MM
EX-1298C 570 EQ 3 1/8 79.4 .625 15.9
EX-1298D 571 EQ 3 3/8 85.7 .625 15.9
EX-1298E 572 EQ 3 3/4 95.3 .625 15.9
EX-1298F 573 EQ 4 1/2 114.3 .625 15.9
EX-1299B
B
A
T
R
U
C
K

&

B
U
S

V
A
L
V
E
S
TRUCK & BUS VALVES
V3- 20 VALVES, ENKEI VALVES, ALCOA VALVES & LOW PROFI LE VALVES, SMALL CLAMP- I N VALVES
EX
--
1299 (V3-20) Series Valves
These valves are for metric rim valve hole (9.7mm). Chrome Finish. The
products listed below are the most popular sizes. Other sizes available
on rm order basis.
EX
--
1296Z (ENKEI) Series Valves
These are high performance chrome plated No Show valves designed to
t into a 0.453 rim valve hole. A rubber washer and nut are on the inside.
EXACTRA
NUMBER
ETRTO # BEND
A B
INCHES MM INCHES MM
EX-1299A V3-20-1 1 3/16 30.16
EX-1299B V3-20- 6 27 1 3/16 30.16 3 3/8 85.73
EX-1299E V3-20-4 27 1 3/16 30.16 2 3/8 60.33
EXACTRA
NUMBER
ETRTO # BEND
LENGTH VALVE HOLE
INCHES MM INCHES MM
EX-1296Z WH23A 3/4 19.05 0.453 11.51
EX-1296Z1 WH206 1 1/4 31.75 0.453 11.51
EX-1296Z2 45 1 3/16 30.17 0.453 11.51
ALCOA Valves & Low Prole Clamp-In Valves
Primarily for use in tubeless truck and bus tires. These double bend clamp-in
tubeless valves feature extra low height and t into a 0.625 valve hole.
Rubber grommet available (part # EXRG-48).
EXACTRA
NUMBER
TR # BEND
LENGTH VALVE HOLE
INCHES MM INCHES MM
EX-509 509 90 4 3/4 120.65 0.625 15.88
EX-510 510 90 5 1/4 133.35 0.625 15.88
EX-511 511 90 4 1/4 107.95 0.625 15.88
EX-513 513 90 + 30 2 5/8 66.68 0.625 15.88
EX-515 515 90 + 30 3 1/4 82.55 0.625 15.88
Small Clamp-In Valves
These small clamp-in valves are a shorter version of the clamp-in truck valves
and are used mostly on cars and light truck applications. Maximum ination
pressure 130 PSI. These valves are supplied with two grommets to allow
tment either in a 0.453 or 0.625 hole.
EXACTRA
NUMBER
TR #
LENGTH VALVE HOLE
INCHES MM INCHES MM
EX-416 416 1 1/4 31.75 0.453 / 0.625 11.51 / 15.88
EX-416L 416 2 50.8 0.453 / 0.625 11.51 / 15.88
EX-416S1 416 3/4 19.05 0.453 11.51
EX-1299E
EX-1299A
EX-1296Z
EX-416S1 EX-416L EX-416
EX-509
L
35
T
R
U
C
K

&

B
U
S

V
A
L
V
E
S
TRUCK & BUS VALVES
SCREW- ON REPAI R VALVES
Screw-On Repair Valves
These screw-on repair valves for trucks & buses are for replacement of an
existing valve on the tube. Simply cut off the damaged valve and screw-on
the repair valve. Can be supplied with or without bridge washer.
Can also be used with SP-1000 tube spud.
EXACTRA
NUMBER
TR #
LENGTH
INCHES MM
EX-1177A 1177A 3 1/4 82.55
EX-1077A 1077A 4 1/8 104.78
EX-1175A 1175A 4 1/2 114.30
EX-1078A 1078A 5 127
EX-1179A 1179A 5 1/8 130.18
EXACTRA
NUMBER
A B C D
x y z BENDS
INCHES MM INCHES MM INCHES MM INCHES MM
EX-1292A 2.50 63.5 86 1
EX-1292B 3.00 76.2 86 1
EX-1292C 4.00 101.6 86 1
EX-1292D 4.50 114.3 86 1
EX-1292E 5.00 127 86 1
EX-1292G 6.00 152.4 86 1
EX-1292T 3.00 76.2 1.10 27.94 1.90 48.26 86 16 2
EX-1292N 3.75 95.25 1.90 48.26 1.85 46.99 86 16 2
EX-1292P 4.00 101.6 2.25 57.15 1.75 44.45 86 16 2
EX-1292Q 4.50 114.3 2.70 68.58 1.80 45.72 86 16 2
EX-1292R 5.00 127 3.15 80.01 1.85 46.99 86 16 2
EX-1292S 5.50 139.7 3.35 85.09 2.15 54.61 86 26 2
EX-1293Q 3.70 93.98 1.60 40.64 1.60 40.64 0.50 12.7 86 26 26 3
EX-1293L 4.00 101.6 1.90 48.26 1.60 40.64 0.50 12.7 86 26 26 3
EX-1293M 4.50 114.3 2.40 60.96 1.60 40.64 0.50 12.7 86 26 26 3
EX-1293N 5.00 127 2.50 63.5 2.00 50.8 0.50 12.7 86 26 26 3
EX-1293R 5.50 139.7 3.00 76.2 2.00 50.8 0.50 12.7 86 26 26 3
Screw-On Repair Valves (Michelin Type)
These valves t onto a tube spud having .305-32 threads. They are available
in a variety of bends to suit the application. Please refer to the chart for the
proper part number relating to the various bends needed.
Rubber Grommet available (part # EX-1295/2).
x
y
z
A
B
C
D
EX-1293
L
EX-1177A
T
R
U
C
K

&

B
U
S

V
A
L
V
E
S
TRUCK & BUS VALVES
VALVE EXTENSI ONS, FLEXI BLE EXTENSI ONS, BENT EXTENSI ONS
Truck & Bus Valve Extensions
These extensions are for accessing the inner dual tire valve on truck and
buses in order to allow for ination checks as well as for inating the tires.
They are available in a variety of lengths shown as effective lengths on the
chart. The EX-1500 series are with SHORT collar and the EX-1500L are with
LONG collar.
EXACTRA
NUMBER
EXACTRA
NUMBER
EFFECTIVE LENGTH
INCHES MM
EX-1500 EX-1500L 2 50.8
EX-1501 EX-1501L 3 76.2
EX-1502 EX-1502L 5 127
EX-1503 EX-1503L 3 5/8 92.01
EX-1504 EX-1504L 4 101.6
EX-1505 EX-1505L 1 1/4 31.75
EX-1506 EX-1506L 6 152.4
Flexible Extensions
The EX-1600 series extensions are made of rubber hose and are used
widely on campers and similar vehicles to facilitate access to the inner dual
valve. They are delivered with a clamp to secure the extension to the outer
wheel bowl.
The EX-1400 series is similar to the EX-1600 series, except it features a steel
braided cover on the hose. They are available in a variety of lengths and
are supplied with one clip.
Bent Extensions for Standard Bore Valves
Bent extensions for Standard Bore valves.
EXACTRA # BEND
VE-36-90 90
VE-36-135 135
EXACTRA
NUMBER
LENGTH
INCHES MM
EX-1407 7 " 177.8
EX-1407-90 7" 177.8
EX-1407-180 7" 177.8
EX-1410 10" 254.0
EX-1410-90 10" 254.0
EX-1410-180 10" 254.0
EXACTRA
NUMBER
LENGTH
INCHES MM
EX-1412 12 304.8
EX-1412-90 12 304.8
EX-1412-180 12 304.8
EX-1414 14 355.6
EX-1414-90 14 355.6
EX-1414-180 14 355.6
EX-1504
EX-1504L
VE-36-135
EX-1607
EX-1407 EX-1407-90 EX-1407-180
1144S clamp
for
EX-1400 series
37
P
A
S
S
E
N
G
E
R

&

L
I
G
H
T

T
R
U
C
K
PASSENGER & LIGHT TRUCK
SNAP- I N VALVES, METAL EXTENSI ON CAPS, STANDARD VALVE CORES, STANDARD VALVE CAPS
EXACTRA
NUMBER
TR #
LENGTH VALVE HOLE
MAX
INFLATION
INCHES MM INCHES MM
EX-412 412 15/16 23.81 0.453 11.5 65 psi
EX-413 413 1 1/4 31.75 0.453 11.5 65 psi
EX-414 414 1 1/2 38.1 0.453 11.5 65 psi
EX-415 415 1 1/4 31.75 0.625 15.88 65 psi
EX-418 418 2 50.8 0.453 11.5 65 psi
EX-423 423 2 1/2 63.5 0.453 11.5 65 psi
EX-425 425 2 50.8 0.625 15.88 65 psi
EX- 600HP 600HP 1 1/4 31.75 0.453 11.5 80 psi
EX- 602HP 602HP 2 50.80 0.453 11.5 80 psi
EX- 670R 618AR 1 7/8 47.63 0.625 15.88 65 psi
EX-801HP 801HP 1 1/4 31.75 0.625 15.88 100 psi
EX-802HP 802HP 2 50.8 0.625 15.88 100 psi
EX-413 EX- 600HP EX-801HP
Snap-In Valves
EXACTRA
NUMBER
TOTAL LENGTH EFFECTIVE LENGTH
TYPE
INCHES MM INCHES MM
EX-1510 7/8 22.23 5/8 15.88 Standard
EX-1511 1 1/16 26.99 3/4 19.05 Standard
EX-1512 1 9/16 39.69 1 1/4 31.75 Standard
EX-1385 7/8 22.23 5/8 15.88 Dual Seal
EX- 670R EX- 602HP EX-802HP
Metal Extension Caps
Metal extensions for light-duty vehicles.
Standard Bore Short Valve Cores
EX-1320 EX-1320S
EX-1511 EX-1385
EXACTRA # DESCRIPTION
EX-1320 Short Valve Core for Standard Bore Valves. Nickel Plated.
EX-1320S Heat-Resistant Short Valve Core for Standard Bore Valves. Nickel Plated.
EX-1363 Metal Screwdriver-Type Cap for Standard Bore Valves.
EX-1365 Metal Dome Type Cap for Standard Bore Valves.
EX-1375 Black Plastic Cap for Standard Bore Valves.
Standard Bore Valve Caps
EX-1312 Metal Heavy Duty Heat Resistant Cap for Standard Bore Valves.
EX-1360 Chrome Hex Cap for Standard Bore Valves
Standard Bore Valve Caps
EX-1363 EX-1365 EX-1375
EX-1312 EX-1360
EX
--
1220 Standard/Large Bore Dial Gauge
Standard & Large Bore dial gauge with calibration feature. Equipped with
lters for dirt. Can also be supplied with lters for dirt and/or liquids.
Replacement elements for these lters are also available. Delivered in a
sturdy plastic case.
Operating Range: 0 200 PSI.
EX
--
1220PH Standard/Large Bore Dial Gauge
Standard & Large Bore dial gauge with plastic handle and calibration
feature. Equipped with lters for dirt. Can also be supplied with lters for
dirt and/or liquids. Replacement elements for these lters are also available.
Delivered in a sturdy plastic case.
EX
--
1230 Standard/Large Bore Dial Gauge
Standard & Large Bore dial gauge with pressure reading retention/release
feature.
EX
--
1230PH Standard/Large Bore Dial Gauge
Standard & Large Bore dial gauge with plastic handle and pressure reading
retention/release feature.
EX
--
1315 Standard Bore Dial Gauge
Standard Bore dial gauge with dual foot chuck and pressure reading
retention/release feature. Delivered in a sturdy plastic case.
EX
--
1240 Large Bore Pocket Dial Gauge
Large Bore pocket type dial gauge.
EX
--
1236 Standard Bore Digital Pressure Gauge
Standard Bore digital pressure gauge features reading retention/release
button, automatic shut off and dual foot chuck. Equipped with lters for
dirt. Can also be supplied with lters for dirt and/or liquids. Replacement
elements for these lters are also available. Delivered in a sturdy plastic case.
D
I
A
L

G
A
U
G
E
S

&

D
I
G
I
T
A
L

G
A
U
G
E
S
STANDARD/LARGE BORE DI AL GAUGES, POCKET DI AL GAUGE, DI GI TAL PRESSURE GAUGE
EX-1220
EX-1220PH
EX-1230
EX-1230PH
EX-1315
EX-1240
EX-1236
39
EX
--
1235PH Large Bore Digital Pressure Gauge
Large Bore digital pressure gauge features reading retention/release button
and automatic shut off, with plastic handle. Equipped with lters for dirt. Can
also be supplied with lters for dirt and/or liquids. Replacement elements for
these lters are also available. Delivered in a sturdy plastic case.
EX
--
1800 Large Bore PRECISION Dial Gauge
Large Bore PRECISION dial gauge with 16 hose. Delivered in a sturdy
plastic case.
EX
--
1800PH Large Bore PRECISION Dial Gauge
Large Bore PRECISION dial gauge with 16 hose and plastic handle.
EX
--
1801 Standard Bore PRECISION Dial Gauge
Standard Bore PRECISION dial gauge with 16 hose and dual foot chuck.
PRECISION Dial Gauges
(
160 PSI
)
As ination pressure is one of the most important factors in tire related safety as well as tire
longevity, it is vital that air pressure gauges used be reliable and precise. The PRECISION
line of gauges offer many advantages as follows:
A button type valve allows the user to retain/release the pressure reading
Readings in PSI (160) and KPA (1120).
The gauge is protected against shocks by means of a rubber protector.
The gauge can be calibrated by means of a set screw in the face of the dial.
The mechanism is specially designed to allow for gradual movement of the indicator towards
the nal reading thus having the same effect as a glycerin-lled gauge. Requires approximately
5 seconds to reach precise readings. One of the main reasons for gauges to lose their reliability
is the sudden impact on the indicator when taking a pressure reading.
Equipped with lters for dirt. Can also be supplied with lters for dirt and/or liquids.
Replacement elements for these lters are also available.
Available for Large Bore and/or Standard Bore as shown below.
EX
--
1235 Large Bore Digital Pressure Gauge
Large Bore digital pressure gauge features reading retention/release button
and automatic shut off. Equipped with lters for dirt. Can also be supplied
with lters for dirt and/or liquids. Replacement elements for these lters are
also available. Delivered in a sturdy plastic case.
D
I
A
L

G
A
U
G
E
S

&

D
I
G
I
T
A
L

G
A
U
G
E
S
LARGE BORE DI GI TAL PRESSURE GAUGES, PRECI SI ON DI AL GAUGES
EX-1235
EX-1235PH
EX-1800
EX-1800PH
EX-1801
G
A
U
G
E
S
GAUGES
POCKET TYPE GAUGES, DUAL FOOT GAUGES, SWI VEL FOOT GAUGES, RECALI BRATEABLE GAUGES
Pocket Type Gauges
EXACTRA
NUMBER
CALIBRATION BAR TYPE FINISH
EX-1005 10 50 PSI Plastic Passenger Tire Chrome
EX-1015 10 130 PSI Plastic Passenger Tire Chrome
EX-1025 5 45 PSI Plastic Air Liquid Tire Chrome
EX-1005
EX-1025
Dual Foot Pocket Type Gauges
EXACTRA
NUMBER
CALIBRATION BAR CHUCK TYPE FINISH
EX-1030 10 130 PSI Plastic Angled Chrome
EX-1031 10 130 PSI Plastic Straight + 30 Reversed Chrome
EX-1030
EX-1031
Dual Foot Gauges
EXACTRA
NUMBER
EX-1035P 10 130 PSI Delrin Angled Chrome
EX-1036P 10 130 PSI Delrin Straight + 30 Reversed Chrome
Recalibratable Dual Foot/Swivel Foot Gauges
EXACTRA
NUMBER
EX-1035MC 10 150 PSI Metal Angled Chrome
EX-1036MC 10 150 PSI Metal Straight + 30 Reversed Chrome
EX-1255MC 10 150 PSI Metal Large Bore - Swivel Foot Chrome
Pocket Type Straight-on Gauges
EXACTRA
NUMBER
EX-1250 10 130 PSI Delrin Straight On Chrome
EX-1250M 10 130 PSI Metal Straight On Chrome
Large Bore Swivel Foot Gauge
EXACTRA
NUMBER
EX-1255P 10 150 PSI Delrin Large Bore - Swivel Foot Chrome
EX-1250M
EX-1035P
EX-1255P
EX-1036MC
EX-1255MC
41
T
O
O
L
S
TOOLS
TI RE TECHNI CI ANS TOOL KI TS, STANDARD BORE TUBE DEFLATOR, CORE REMOVAL TOOLS
EX
--
1200K Tool Kit (OTR Version)
Tire Technicians Tool Kit OTR version. This kit includes:
1 EX-910 high quality tread depth gauge (OTR aluminum body with
magnifying lens. Lens is replaceable if it becomes damaged during use)
1 EX-1016 large bore core remover
1 EX-1021 damaged core remover for large bore application
1 EX-1018 large bore hex cap removing tool
1 EX-1800PH precision pressure gauge with plastic handle
This gauge features readings up to 160 PSI, is recalibratable via means of
a set screw in the face of the dial, is protected against shock by means of
a rubber cover, & features a specially designed internal mechanism which
allows for gradual movement of indicator to ensure accuracy of pressure
reading. The complete kit comes with its own sturdy plastic carrying case
with interior foam to protect against damage to items. The kit design allows
for the user to add their own items as needed in their respective market.
EX
--
1200KT Tool Kit (Commercial Truck Version)
Tire Technicians Tool Kit Commercial Truck version. This kit includes:
1 EX-1420 high quality truck tread depth gauge (Stainless steel body,
with metric & inch readings)
1 EX-1616 standard bore core remover
1 EX-1520S standard bore, 4-way valve tool, removes damaged core
as well as non-damaged core, rebuild internal & external threads
1 EX-1801 precision pressure gauge with standard bore dual foot chuck
1 EX-1285 adaptor to convert large bore to standard bore; this allows
the user to take pressure readings with the EX-1801 precision pressure
gauge on both large bore as well as standard bore application without
the need for a specic large bore gauge
This gauge features readings up to 160 PSI, is recalibratable via means of
a set screw in the face of the dial, is protected against shock by means of
a rubber cover, & features a specially designed internal mechanism which
allows for gradual movement of indicator to ensure accuracy of pressure
reading. The complete kit comes with its own sturdy plastic carrying case
with interior foam to protect against damage to items. The kit design allows
for the user to add their own items as needed in their respective market.
EX
--
LT03 Standard Bore Tube Deator
Tube deator for Standard Bore.
EX
--
1616 Standard Bore Core Remover
Tool to remove Standard Bore valve cores. Made of plastic handle and
hardened steel to ensure longevity.
EX
--
685 Large/Standard Bore Core Remover
Combination Large Bore & Standard Bore valve core removing tool.
EX-1200K
EX-1200KT
EX-LT03
EX-1616
EX- 685
T
O
O
L
S
TOOLS
VALVE CORE TOOLS, VALVE CAP TOOLS, EXTRACTOR TOOLS, VALVE FI SHI NG TOOLS
EX
--
1018 Hex Head Valve Cap Tool
Large Bore hex head valve cap tool. (6 1/2 length)
EX
--
1018L Hex Head Valve Cap Tool
Large Bore hex head valve cap tool. (10 length)
EX
--
1019 Core Extractor Tool
Large Bore valve core removal tool. (5 1/2 length)
EX
--
1021 Broken Core Extractor Tool
Extractor tool to remove broken Large Bore valve cores.
EX
--
1016 Large Bore Valve Core Tool
Special Large Bore valve core tool. Sliding sleeve allows for gripping of the
valve core during removal/tment. (5 1/2 length)
EX
--
Same as EX-1016 except longer. (10 1/2 length)
EX
--
609LB Large Bore Valve Fishing Tool
Fishing tool used to guide the valve into proper place during tment of tire
and tube assembly onto the rim. For Large Bore application.
EX
--
609 Standard Bore Valve Fishing Tool
Same features as that of EX-609LB except it is for Standard Bore application.
EX
--
610 Standard Bore Valve Fishing Tool
Same application as that of EX-609 except the handle contains a valve core
remover feature as well as thread rebuilder. Length is 8.
Also available in 24 length under part number EX-610L.
EX-1016
EX-1017
EX-1018
EX-1018L
EX-1019
EX-1021
EX- 609LB
EX- 609
EX- 610
43
T
O
O
L
S
TOOLS
VALVE CORE TOOLS, TI RE TREAD DEPTH GAUGES
EX
--
1520S Standard Bore Valve Core Tool
Four way valve core tool for Standard Bore application. For rebuilding of
the inside and outside threads of Standard Bore valves. Easily removes intact
and/or damaged valve cores.
EX
--
Four way valve core tool for Large Bore application. For rebuilding of the
inside and outside threads of Large Bore valves. Easily removes intact and/or
damaged valve cores.
EX
--
Similar application as that of EX-1522, except that it will not remove broken
valve cores. However, it will rebuild inner threads of air water valves such as
EX-670 (TR-618A).
EX
--
1420 Truck Tire Tread Depth Gauge
Truck tire tread depth gauge calibrated in 1/32 units and millimeters.
Delivered in a plastic case.
EX
--
355 OTR Tread Depth Gauge
Plastic OTR tread depth gauge calibrated in 1/32 units.
EX
--
910 Prefessional OTR Tread Depth Gauge
Professional OTR tread depth gauge. Features magnied readings, body
made of sturdy anodized nish aluminum, replaceable lens and stainless
steel ruler calibrated in 1/32 units and millimeters. Delivered in a leatherette
pouch.
EX
--
595 Tire Tread Depth Gauge
Tire tread depth gauge calibrated in 1/32 units.
EX-1520S
EX-1522
EX-1525
EX-355 EX-1420
EX-910
EX-595
I
N
F
L
A
T
O
R
S
INFLATORS
STANDARD BORE I NFLATORS, LARGE BORE I NFLATORS, STANDARD/LARGE BORE DUAL I NFLATORS
EX
--
920
--
## Standard/Large Bore Dual Inator
Dual inator for Large Bore and Standard Bore applications. Equipped with
EX-4660A & H-5265 closed chucks. Features a bleeder valve and a valve
on the manifold to allow for pressure check. Specify required length when
ordering.
EX
--
920/1
--
3 Standard/Large Bore Dual Inator
Same as EX-920 but with 3 hose instead of 5.
EX-920
EX-920/1-3
INFLATORS
EXACTRA inators are supplied with standard 5 hoses, unless specied differently.
Inators can be ordered in any length. When ordering specify the required length
by replacing the -## that appears after the part number.
For example EX-920-## with 12 hose would be ordered as EX-920-12.
EX
--
920X
--
## Std/Large Bore Dual Inator Gauge
Dual inator for Large Bore and Standard Bore applications. Equipped with
a dial gauge. By releasing the control valve lever the tires ination pressure
is indicated on the dial gauge. Specify required length when ordering.
EX
--
921
--
## Large Bore Inator
Single inator for Large Bore applications. Equipped with EX-4660AFT open
chuck. Specify required length when ordering.
EX
--
922
--
## Standard Bore Inator
Same as EX-921 except equipped with H-5265FT Standard Bore open chuck.
Specify required length when ordering.
EX
--
923
--
## Large Bore Inator Gauge
Single inator gauge for Large Bore applications. Equipped with EX-4660AFT
open chuck. Gauge is calibrated 10 150 PSI in 2 PSI increments. Specify
required length when ordering.
EX-920X
EX-921
EX-923
EX
--
54
--
920
--
## Standard Bore Inator Gauge
Single inator gauge for Standard Bore applications. Equipped with 16
hose and calibrated 0 90 PSI. Specify required length when ordering. EX-54-920
45
I
N
F
L
A
T
O
R
S
INFLATORS
STANDARD BORE I NFLATORS, LARGE BORE I NFLATORS, PRECI SI ON LARGE BORE I NFLATORS
EX
--
924
--
Single inator for Standard Bore applications. Equipped with H-5265FT
open chuck. Gauge is calibrated 10 150 PSI in 2 PSI increments. Specify
EX
--
926HD
--
## Large Bore Inator
Heavy duty inator for Large Bore applications. Equipped with 3/8 I.D.
hose and ball valve control and EX-4660AFT open chuck. Specify required
length when ordering.
EX
--
927
--
Single inator gauge for Standard Bore applications. Equipped with the
EX-6569LO open chuck. Gauge is calibrated 10 150 PSI in 2 PSI
increments. Specify required length when ordering.
EX
--
980C
--
## PRECISION Large Bore Inator
For Large Bore applications. Supplied with EX-4660AFT open chuck and
1/4 I.D. hose. Specify required length when ordering.
EX
--
980CHD
-
For heavy-duty Large Bore applications. Supplied with EX-4660AFT open
chuck and 3/8 I.D. hose. Specify required length when ordering.
EX
--
980FT
-
For Large Bore application. Supplied with EX-4660AFT open chuck. Specify
EX-924
EX-926HD
EX-927
PRECISION Inator Gauges
The PRECISION series of inator gauges are of a European style design. They are sturdy, well
calibrated, and with proper care will deliver long service. Readings to 170 PSI and 1200 KpA.
The handle is ergonomically designed for comfort. It is equipped with a bleeder valve and the
gauge is covered with a sturdy rubber protector. Recalibration is possible and requires a specic
procedure. They are delivered with a 6 hose but can be supplied with any length requested.
Available with a variety of chucks as shown below:
EX-980C
EX-980CHD
EX-980FT
C
H
U
C
K
S
CHUCKS
BALL FOOT CHUCKS, CLI P- ON CHUCKS, SCREW- ON CHUCKS, LOCK- ON CHUCKS
EX
--
5565 Ball Foot Chuck
Ball foot chuck for Standard Bore. 1/4 NPT female thread.
EX
--
5567 Clip-on Ball Foot Chuck
European-style Clip-on Chucks
European-Style Ball foot chucks for Standard Bore.
EX-5565
EX-5567
EX-5567 Clip-on ball foot chuck for Standard Bore. NPT female thread.
EX-5566 Replacement clip for EX-5567 chuck.
EX-1586C Closed clip-on chuck for Standard Bore. 1/4 NPT thread.
EX-1586FT Open clip-on chuck for Standard Bore. 1/4 NPT thread.
EX-1587C Closed clip-on chuck for Standard Bore. 1/4 Barb.
EX-1587FT1 Open clip-on chuck for Standard Bore. 1/4 Barb.
EX-1587FT2 Open clip-on chuck for Standard Bore. 3/16 Barb. EX-1586C EX-1587C
EX
--
565 Screw-on Chuck
Screw-on chuck with .482-26 thread to t directly onto the Large Bore valve
with the core removed to allow for blast of air to quickly seat the beads.
Attaches to any air line having 1/2 NPT thread.
EX-565
EX
--
366 Lock-on Chuck
Lock-on Large Bore air chuck. Chuck locks on valve when cocked to one side
on the threads. Has 1/4 NPT thread.
EX-366
EX
--
666 Lock-on Chuck (Long Version)
Lock-on Large Bore air chuck. Chuck locks on valve when cocked to one side
on the threads. Has 1/4 NPT thread.
EX- 666
EX
--
4660A Large Bore Clip-on Chucks
Clip-on Large Bore air chucks. Chuck locks on to valve when cocked to one
side on the threads. Has 1/4 NPT thread.
EX-4460A
EX-4660A Closed clip-on chuck for Large Bore. 1/4 NPT thread.
EX-4660AFT Open clip-on chuck for Large Bore. 1/4 NPT thread.
47
C
H
U
C
K
S
CHUCKS
CLI P- ON CHUCKS, DUAL FOOT CHUCKS
H
--
5265 Standard Bore Clip-on Chucks
Clip-on Standard Bore air chucks. Securely locks onto the valve when sleeve
is pushed forward. Releases when sleeve is pulled back. 1/4 NPT thread.
H-5265
H-5265 Closed lock-on chuck for Large Bore. 1/4 NPT thread.
H-5265FT Open lock-on chuck for Large Bore. 1/4 NPT thread.
EX
--
5560 Standard Bore Clip-on Chuck
Standard Bore closed clip-on chuck. Locks on automatically when pushed
onto the valve. Slide sleeve back to release. 1/4 NPT thread.
EX-5560
EX
--
6569 Dual Foot Chucks
Straight-on and 30 reverse angle chuck. 1/4 NPT connection thread.
Also available with lock-on feature.
EX- 6569 Straight on + 30 reverse angle dual foot chuck.
EX- 6569LO Straight on + 30 reverse angle dual foot chuck with lock-on feature.
EX- 6569
EX
--
6566 Dual Foot Chucks
Dual foot air chucks for truck & bus tires. 1/4 NPT female thread.
Available as closed or open type.
EX- 6566 Closed Dual foot air chuck for truck & bus tires. 1/4 NPT thread.
EX- 6566FT Open Dual foot air chuck for truck & bus tires. 1/4 NPT thread.
EX- 6566
EX
--
6350LO Dual Foot Closed Chuck
Straight-on and 30 reverse angle closed chuck. 1/4 NPT connection thread
and black polyurethane nish for durability.
EX- 6350LO
O
-
R
I
N
G
S
,

L
-
R
I
N
G
S

&

G
R
O
M
M
E
T
S
O-RINGS & L-RINGS & GROMMETS
O- RI NGS, L- RI NGS, GROMMETS
O-rings
EXACTRA O-rings are manufactured with a formulation of EPDM compound
offering excellent resistance to severe cold and hot temperature. O-rings are
spliced using a very high quality rubber based cement and cured in a
heated press @ 165C.
Custom sizes available on request.
EXACTRA
NUMBER
RIM SIZE DIAMETER
PKG CTN
INCHES INCHES
OR-219 19 0.26 2 24
OR-220TG 20 0.26 2 24
OR-221 21 0.26 2 24
OR-224TG 24 0.26 2 24
OR-225T 25 0.26 2 24
OR-319T 19 0.385 2 24
OR-320T 20 0.385 2 24
OR-321T 21 0.385 2 24
OR-324T 24 0.385 2 24
OR-325T 25 0.385 2 24
OR-329T 29 0.385 2 24
OR-333T 33 0.385 2 24
OR-335T 35 0.385 2 24
OR-339T 39 0.385 2 24
OR-343T 43 0.385 2 24
OR-345T 45 0.385 2 24
OR-349T 49 0.385 2 24
OR-351T 51 0.385 2 24
OR-357T 57 0.385 2 12
OR-445T 45 0.5 2 12
OR-449T 49 0.5 2 12
OR-451T 51 0.5 2 12
OR-457T 57 0.5 2 12
OR-463T 63 0.5 2 10
OR-469T 69 0.5 2 10
LR-20 20" L-RING SEAL
LR- 63 63" L-RING SEAL
LR- 69 69" L-RING SEAL
L-ring Seals
L-ring seals are not meant to correct or compensate for
damaged beads. L-ring seals are primarily used to create
an air seal where the tire bead meets the wheel. They are
particularly useful in the following situations:
Where the rim butt weld may be irregular
To correct a minor leak between the bead and rim
To facilitate bead seating in difcult situations
Air leakage attributed to rim deformation
RIM
DIAMETER
EXACTRA # TR # APPLICATION
EXRG-7 RG-7 EX- 670, EX- 670P, EX- 672, EX- 678, EX- 679
EXRG-16 RG-16 EXJ- 690 Series, EX-9002, EX-9004, EXDS-210 (Viton)
EXRG-22 RG-22 EX-1300, EX-1302, EXT-81, EX-82 (Viton)
EXRG-46 RG-46 EX-509, EX-510, EX-511
EXRG-48 RG-48 EX-513, EX-515
EXRG- 60 RG- 60 EX-540 Series (Red Silicone)
EX-570GS RG-15 EX-1296 Series (Red Silicone)
EXX-381G EX-1305, EXX-381
EX-125 SXL-1050 (90 DURO)
EX-126 SLB Series Swivel Connectors
EX-127 EXR-520, EXR-521 (90 DURO)
SXL-124 SXL Series Swivel Connectors
SGB-123 SGB-110
EX-1295/2 Rubber Washer for Michelin Valves EX-1292/1293 series
Grommets & O-rings
L-RING
WARRANTY
All products sold by EXACTRA are guaranteed to be free from defects in workmanship
and materials for a period of 90 days from date of shipment from plant. EXACTRA will
replace any item found to be defective, or, at its option, will refund the purchase price
of such item, provided that notice of the defect is given by the buyer within 90 days
from date of shipment.
The above warranty is in lieu of all other warranties, expressed or implied.
RETURN POLICY
All products being returned for credit must be pre-authorized and in good working
condition. Items may be subject to a restocking fee.
CATALOGUE DISCLAIMER
This catalogue represents only a portion of the EXACTRA product offering. Additional
products and/or special order items are also available. Please contact us for your
specic requirements.
While every effort has been made to ensure the accuracy of the information in this
catalogue, please be aware that there may be errors. In addition, products and/or
specications may change. Not all product images may be exactly as shown.
E
X
-
C
A
T
2
0
1
4
18
8560 Torbram Rd
Brampton, ON L6T 5C9
905.791.1429
[email protected]
Exactra Inc.
exactra-valves.com

Exactra 2014 PDF

Uploaded by

Copyright:

Available Formats

Exactra 2014 PDF

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Exactra 2014 PDF

Uploaded by

Copyright:

Available Formats

TIRE INFLATION

You might also like