The Z Shell Manual

Version 5.0.6
Updated August 28, 2014
Original documentation by Paul Falstad
This is a texinfo version of the documentation for the Z Shell, originally by Paul Falstad.
Permission is granted to make and distribute verbatim copies of this manual provided the copy-
right notice and this permission notice are preserved on all copies.
Permission is granted to copy and distribute modied versions of this manual under the condi-
tions for verbatim copying, provided also that the entire resulting derived work is distributed
under the terms of a permission notice identical to this one.
Permission is granted to copy and distribute translations of this manual into another language,
under the above conditions for modied versions.
i
Table of Contents
1 The Z Shell Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
1.1 Producing documentation from zsh.texi . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
2 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
2.1 Author . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
2.2 Availability. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
2.3 Mailing Lists . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
2.4 The Zsh FAQ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
2.5 The Zsh Web Page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
2.6 The Zsh Userguide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
2.7 The Zsh Wiki . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
2.8 See Also. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
3 Roadmap. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
3.1 When the shell starts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
3.2 Interactive Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
3.2.1 Completion. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
3.2.2 Extending the line editor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
3.3 Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
3.4 Pattern Matching . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
3.5 General Comments on Syntax . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
3.6 Programming. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
4 Invocation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
4.1 Invocation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
4.2 Compatibility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
4.3 Restricted Shell . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
5 Files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
5.1 Startup/Shutdown Files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
5.2 Files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
6 Shell Grammar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
6.1 Simple Commands & Pipelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
6.2 Precommand Modiers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
6.3 Complex Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
6.4 Alternate Forms For Complex Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
6.5 Reserved Words . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
6.6 Errors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
6.7 Comments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
6.8 Aliasing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
6.9 Quoting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
7 Redirection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
7.1 Opening le descriptors using parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
7.2 Multios . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
7.3 Redirections with no command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
ii
8 Command Execution. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
9 Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
9.1 Autoloading Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
9.2 Anonymous Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
9.3 Special Functions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
9.3.1 Hook Functions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
9.3.2 Trap Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
10 Jobs & Signals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
10.1 Jobs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
10.2 Signals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
11 Arithmetic Evaluation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
12 Conditional Expressions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
13 Prompt Expansion. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
13.1 Expansion of Prompt Sequences . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
13.2 Simple Prompt Escapes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
13.2.1 Special characters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
13.2.2 Login information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
13.2.3 Shell state. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
13.2.4 Date and time. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
13.2.5 Visual eects . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
13.3 Conditional Substrings in Prompts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
14 Expansion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
14.1 History Expansion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
14.1.1 Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
14.1.2 Event Designators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
14.1.3 Word Designators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
14.1.4 Modiers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
14.2 Process Substitution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
14.3 Parameter Expansion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
14.3.1 Parameter Expansion Flags . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
14.3.2 Rules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
14.3.3 Examples . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
14.4 Command Substitution. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
14.5 Arithmetic Expansion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
14.6 Brace Expansion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
14.7 Filename Expansion. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
14.7.1 Dynamic named directories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
14.7.2 Static named directories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
14.7.3 = expansion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
14.7.4 Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
14.8 Filename Generation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
14.8.1 Glob Operators. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
14.8.2 ksh-like Glob Operators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
14.8.3 Precedence . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
14.8.4 Globbing Flags . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
iii
14.8.5 Approximate Matching . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
14.8.6 Recursive Globbing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
14.8.7 Glob Qualiers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
15 Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
15.1 Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
15.2 Array Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
15.2.1 Array Subscripts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
15.2.2 Array Element Assignment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
15.2.3 Subscript Flags. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
15.2.4 Subscript Parsing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
15.3 Positional Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
15.4 Local Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
15.5 Parameters Set By The Shell . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
15.6 Parameters Used By The Shell . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
16 Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88
16.1 Specifying Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88
16.2 Description of Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
16.2.1 Changing Directories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
16.2.2 Completion. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
16.2.3 Expansion and Globbing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
16.2.4 History. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
16.2.5 Initialisation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
16.2.6 Input/Output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
16.2.7 Job Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
16.2.8 Prompting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100
16.2.9 Scripts and Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
16.2.10 Shell Emulation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103
16.2.11 Shell State . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107
16.2.12 Zle. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107
16.3 Option Aliases . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
16.4 Single Letter Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109
16.4.1 Default set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109
16.4.2 sh/ksh emulation set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110
16.4.3 Also note . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111
17 Shell Builtin Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111
18 Zsh Line Editor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 144
18.1 Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 144
18.2 Keymaps. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 145
18.2.1 Reading Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 145
18.3 Zle Builtins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 146
18.4 Widgets. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 154
18.5 User-Dened Widgets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 154
18.5.1 Special Widgets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 157
18.6 Standard Widgets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 158
18.6.1 Movement. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 158
18.6.2 History Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 160
18.6.3 Modifying Text. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 164
18.6.4 Arguments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 168
iv
18.6.5 Completion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 168
18.6.6 Miscellaneous . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 169
18.7 Character Highlighting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 173
19 Completion Widgets. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 176
19.1 Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 176
19.2 Completion Special Parameters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 176
19.3 Completion Builtin Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 182
19.4 Completion Condition Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 187
19.5 Completion Matching Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 187
19.6 Completion Widget Example . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 191
20 Completion System. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 191
20.1 Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 191
20.2 Initialization . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 192
20.2.1 Use of compinit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 192
20.2.2 Autoloaded les . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 193
20.2.3 Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 196
20.3 Completion System Conguration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 197
20.3.1 Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 197
20.3.2 Standard Tags . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 199
20.3.3 Standard Styles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 203
20.4 Control Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 225
20.5 Bindable Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 230
20.6 Utility Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 232
20.7 Completion Directories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 254
21 Completion Using compctl . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 254
21.1 Types of completion. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 254
21.2 Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 255
21.3 Command Flags . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 255
21.4 Option Flags . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 256
21.4.1 Simple Flags . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 256
21.4.2 Flags with Arguments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 257
21.4.3 Control Flags . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 258
21.5 Alternative Completion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 261
21.6 Extended Completion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 261
21.7 Example . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 263
22 Zsh Modules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 263
22.1 Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 263
22.2 The zsh/attr Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 265
22.3 The zsh/cap Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 265
22.4 The zsh/clone Module. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 265
22.5 The zsh/compctl Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 266
22.6 The zsh/complete Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 266
22.7 The zsh/complist Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 266
22.7.1 Colored completion listings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 266
22.7.2 Scrolling in completion listings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 268
22.7.3 Menu selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 268
22.8 The zsh/computil Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 271
22.9 The zsh/curses Module. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 272
v
22.9.1 Builtin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 273
22.9.2 Parameters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 276
22.10 The zsh/datetime Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 276
22.11 The zsh/deltochar Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 277
22.12 The zsh/example Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 277
22.13 The zsh/les Module. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 277
22.14 The zsh/langinfo Module. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 279
22.15 The zsh/maple Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 280
22.15.1 Limitations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 280
22.16 The zsh/mathfunc Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 280
22.17 The zsh/newuser Module. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 281
22.18 The zsh/parameter Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 282
22.19 The zsh/pcre Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 284
22.20 The zsh/regex Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 285
22.21 The zsh/sched Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 286
22.22 The zsh/net/socket Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 287
22.22.1 Outbound Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 287
22.22.2 Inbound Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 287
22.23 The zsh/stat Module. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 287
22.24 The zsh/system Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 289
22.24.1 Builtins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 289
22.24.2 Parameters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 291
22.25 The zsh/net/tcp Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 292
22.25.1 Outbound Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 292
22.25.2 Inbound Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 293
22.25.3 Closing Connections. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 293
22.25.4 Example . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 293
22.26 The zsh/termcap Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 294
22.27 The zsh/terminfo Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 294
22.28 The zsh/zftp Module. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 294
22.28.1 Subcommands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 294
22.28.2 Parameters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 298
22.28.3 Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 300
22.28.4 Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 300
22.29 The zsh/zle Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 301
22.30 The zsh/zleparameter Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 301
22.31 The zsh/zprof Module. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 301
22.32 The zsh/zpty Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 302
22.33 The zsh/zselect Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 303
22.34 The zsh/zutil Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 304
23 Calendar Function System. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 308
23.1 Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 308
23.2 File and Date Formats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 308
23.2.1 Calendar File Format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 309
23.2.2 Date Format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 309
23.2.3 Relative Time Format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 311
23.2.4 Example . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 312
23.3 User Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 312
23.3.1 Calendar system functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 312
23.3.2 Glob qualiers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 316
23.4 Styles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 317
23.5 Utility functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 318
23.6 Bugs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 319
vi
24 TCP Function System. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 320
24.1 Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 320
24.2 TCP User Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 320
24.2.1 Basic I/O . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 320
24.2.2 Session Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 323
24.2.3 Advanced I/O. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 323
24.2.4 One-shot le transfer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 325
24.3 TCP User-dened Functions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 326
24.4 TCP Utility Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 327
24.5 TCP User Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 327
24.6 TCP User-dened Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 329
24.7 TCP Utility Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 329
24.8 TCP Examples. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 330
24.9 TCP Bugs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 330
25 Zftp Function System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 330
25.1 Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 330
25.2 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 331
25.3 Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 331
25.3.1 Opening a connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 331
25.3.2 Directory management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 332
25.3.3 Status commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 333
25.3.4 Retrieving les . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 333
25.3.5 Sending les . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 334
25.3.6 Closing the connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 334
25.3.7 Session management. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 335
25.3.8 Bookmarks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 335
25.3.9 Other functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 336
25.4 Miscellaneous Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 337
25.4.1 Conguration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 337
25.4.2 Remote globbing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 338
25.4.3 Automatic and temporary reopening. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 338
25.4.4 Completion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 339
26 User Contributions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 339
26.1 Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 339
26.2 Utilities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 339
26.2.1 Accessing On-Line Help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 339
26.2.2 Recompiling Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 340
26.2.3 Keyboard Denition. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 341
26.2.4 Dumping Shell State . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 342
26.2.5 Manipulating Hook Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 343
26.3 Remembering Recent Directories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 343
26.3.1 Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 343
26.3.2 Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 344
26.3.3 Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 344
26.3.4 Conguration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 344
26.3.5 Use with dynamic directory naming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 346
26.3.6 Details of directory handling. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 346
26.4 Gathering information from version control systems. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 347
26.4.1 Quickstart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 348
26.4.2 Conguration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 349
26.4.3 Oddities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 354
vii
26.4.4 Quilt Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 354
26.4.5 Function Descriptions (Public API) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 355
26.4.6 Variable Description. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 356
26.4.7 Hooks in vcs info. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 356
26.4.8 Examples . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 359
26.5 Prompt Themes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 360
26.5.1 Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 361
26.5.2 Theme Selection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 361
26.6 ZLE Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 361
26.6.1 Widgets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 361
26.6.2 Utility Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 375
26.6.3 Styles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 376
26.7 Exception Handling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 378
26.8 MIME Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 379
26.9 Mathematical Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 384
26.10 User Conguration Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 386
26.11 Other Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 387
26.11.1 Descriptions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 387
26.11.2 Styles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 393
Concept Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 394
Variables Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 400
Options Index. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 404
Functions Index. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 411
Editor Functions Index. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 415
Style and Tag Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 418
Chapter 2: Introduction 1
1 The Z Shell Manual
This document has been produced from the texinfo le zsh.texi, included in the Doc sub-
directory of the Zsh distribution.
1.1 Producing documentation from zsh.texi
The texinfo source may be converted into several formats:
The Info manual
The Info format allows searching for topics, commands, functions, etc. from the
many Indices. The command makeinfo zsh.texi is used to produce the Info
documentation.
The printed manual
The command texi2dvi zsh.texi will output zsh.dvi which can then be pro-
cessed with dvips and optionally gs (Ghostscript) to produce a nicely formatted
printed manual.
The HTML manual
An HTML version of this manual is available at the Zsh web site via:
http://zsh.sourceforge.net/Doc/.
(The HTML version is produced with texi2html, which may be obtained from
http://www.nongnu.org/texi2html/. The command is texi2html --output .
--ifinfo --split=chapter --node-files zsh.texi. If necessary, upgrade to
version 1.78 of texi2html.)
For those who do not have the necessary tools to process texinfo, precompiled documentation
(PostScript, dvi, info and HTML formats) is available from the zsh archive site or its mirrors,
in the le zsh-doc.tar.gz. (See Section 2.2 [Availability], page 1 for a list of sites.)
2 Introduction
Zsh is a UNIX command interpreter (shell) usable as an interactive login shell and as a shell
script command processor. Of the standard shells, zsh most closely resembles ksh but includes
many enhancements. Zsh has command line editing, builtin spelling correction, programmable
command completion, shell functions (with autoloading), a history mechanism, and a host of
other features.
2.1 Author
Zsh was originally written by Paul Falstad <[email protected]>. Zsh is now maintained by the
members of the zsh-workers mailing list <[email protected]>. The development is cur-
rently coordinated by Peter Stephenson <[email protected]>. The coordinator can be contacted at
<[email protected]>, but matters relating to the code should generally go to the mailing
list.
2.2 Availability
Zsh is available from the following anonymous FTP sites. These mirror sites are kept frequently
up to date. The sites marked with (H) may be mirroring ftp.cs.elte.hu instead of the primary
site.
Chapter 2: Introduction 2
Primary site
ftp://ftp.zsh.org/pub/
http://www.zsh.org/pub/
Australia ftp://ftp.zsh.org/pub/
http://www.zsh.org/pub/
http://mirror.dejanseo.com.au/pub/zsh/
Hungary ftp://ftp.cs.elte.hu/pub/zsh/
http://www.cs.elte.hu/pub/zsh/
The up-to-date source code is available via anonymous CVS and Git from Sourceforge. See
http://sourceforge.net/projects/zsh/ for details. A summary of instructions for the CVS
and Git archives can be found at http://zsh.sourceforget.net/.
2.3 Mailing Lists
Zsh has 3 mailing lists:
<[email protected]>
Announcements about releases, major changes in the shell and the monthly posting
of the Zsh FAQ. (moderated)
<[email protected]>
User discussions.
<[email protected]>
Hacking, development, bug reports and patches.
To subscribe or unsubscribe, send mail to the associated administrative address for the mailing
list.
<[email protected]>
<[email protected]>
<[email protected]>
<[email protected]>
<[email protected]>
<[email protected]>
YOU ONLY NEED TO JOIN ONE OF THE MAILING LISTS AS THEY ARE NESTED.
All submissions to zsh-announce are automatically forwarded to zsh-users. All submissions to
zsh-users are automatically forwarded to zsh-workers.
If you have problems subscribing/unsubscribing to any of the mailing lists, send mail
to <[email protected]>. The mailing lists are maintained by Karsten Thygesen
<[email protected]>.
The mailing lists are archived; the archives can be accessed via the administrative addresses
listed above. There is also a hypertext archive, maintained by Geo Wing <[email protected]>,
available at http://www.zsh.org/mla/.
2.4 The Zsh FAQ
Zsh has a list of Frequently Asked Questions (FAQ), maintained by Peter Stephenson
<[email protected]>. It is regularly posted to the newsgroup comp.unix.shell and the
zsh-announce mailing list. The latest version can be found at any of the Zsh FTP
sites, or at http://www.zsh.org/FAQ/. The contact address for FAQ-related matters is
<[email protected]>.
Chapter 3: Roadmap 3
2.5 The Zsh Web Page
Zsh has a web page which is located at http://www.zsh.org/. This is maintained by Karsten
Thygesen <[email protected]>, of SunSITE Denmark. The contact address for web-related mat-
ters is <[email protected]>.
2.6 The Zsh Userguide
A userguide is currently in preparation. It is intended to complement the manual, with expla-
nations and hints on issues where the manual can be cabbalistic, hierographic, or downright
mystifying (for example, the word hierographic does not exist). It can be viewed in its current
state at http://zsh.sourceforge.net/Guide/. At the time of writing, chapters dealing with
startup les and their contents and the new completion system were essentially complete.
2.7 The Zsh Wiki
A wiki website for zsh has been created at http://www.zshwiki.org/. This is a site which
can be added to and modied directly by users without any special permission. You can add
your own zsh tips and congurations.
2.8 See Also
man page sh(1), man page csh(1), man page tcsh(1), man page rc(1), man page bash(1), man
page ksh(1)
IEEE Standard for information Technology - Portable Operating System Interface (POSIX) -
Part 2: Shell and Utilities, IEEE Inc, 1993, ISBN 1-55937-255-9.
3 Roadmap
The Zsh Manual, like the shell itself, is large and often complicated. This section of the manual
provides some pointers to areas of the shell that are likely to be of particular interest to new
users, and indicates where in the rest of the manual the documentation is to be found.
3.1 When the shell starts
When it starts, the shell reads commands from various les. These can be created or edited to
customize the shell. See Chapter 5 [Files], page 8.
If no personal initialization les exist for the current user, a function is run to help you
change some of the most common settings. It wont appear if your administrator has dis-
abled the zsh/newuser module. The function is designed to be self-explanatory. You can run
it by hand with autoload -Uz zsh-newuser-install; zsh-newuser-install -f. See also
Section 26.10 [User Conguration Functions], page 386.
3.2 Interactive Use
Interaction with the shell uses the builtin Zsh Line Editor, ZLE. This is described in detail in
Chapter 18 [Zsh Line Editor], page 144.
The rst decision a user must make is whether to use the Emacs or Vi editing mode as the
keys for editing are substantially dierent. Emacs editing mode is probably more natural for
beginners and can be selected explicitly with the command bindkey -e.
A history mechanism for retrieving previously typed lines (most simply with the Up or Down
arrow keys) is available; note that, unlike other shells, zsh will not save these lines when the shell
exits unless you set appropriate variables, and the number of history lines retained by default is
Chapter 3: Roadmap 4
quite small (30 lines). See the description of the shell variables (referred to in the documentation
as parameters) HISTFILE, HISTSIZE and SAVEHIST in Section 15.6 [Parameters Used By The
Shell], page 80.
The shell now supports the UTF-8 character set (and also others if supported by the oper-
ating system). This is (mostly) handled transparently by the shell, but the degree of sup-
port in terminal emulators is variable. There is some discussion of this in the shell FAQ,
http://zsh.dotsrc.org/FAQ/ . Note in particular that for combining characters to be handled
the option COMBINING_CHARS needs to be set. Because the shell is now more sensitive to the
denition of the character set, note that if you are upgrading from an older version of the shell
you should ensure that the appropriate variable, either LANG (to aect all aspects of the shells
operation) or LC_CTYPE (to aect only the handling of character sets) is set to an appropriate
value. This is true even if you are using a single-byte character set including extensions of
ASCII such as ISO-8859-1 or ISO-8859-15. See the description of LC_CTYPE in Chapter 15
[Parameters], page 70.
3.2.1 Completion
Completion is a feature present in many shells. It allows the user to type only a part (usually
the prex) of a word and have the shell ll in the rest. The completion system in zsh is
programmable. For example, the shell can be set to complete email addresses in arguments to
the mail command from your ~/.abook/addressbook; usernames, hostnames, and even remote
paths in arguments to scp, and so on. Anything that can be written in or glued together with
zsh can be the source of what the line editor oers as possible completions.
Zsh has two completion systems, an old, so called compctl completion (named after the builtin
command that serves as its complete and only user interface), and a new one, referred to as
compsys, organized as library of builtin and user-dened functions. The two systems dier in
their interface for specifying the completion behavior. The new system is more customizable and
is supplied with completions for many commonly used commands; it is therefore to be preferred.
The completion system must be enabled explicitly when the shell starts. For more information
see Chapter 20 [Completion System], page 191.
3.2.2 Extending the line editor
Apart from completion, the line editor is highly extensible by means of shell functions. Some
useful functions are provided with the shell; they provide facilities such as:
insert-composed-char
composing characters not found on the keyboard
match-words-by-style
conguring what the line editor considers a word when moving or deleting by word
history-beginning-search-backward-end, etc.
alternative ways of searching the shell history
replace-string, replace-pattern
functions for replacing strings or patterns globally in the command line
edit-command-line
edit the command line with an external editor.
See Section 26.6 [ZLE Functions], page 361 for descriptions of these.
Chapter 3: Roadmap 5
3.3 Options
The shell has a large number of options for changing its behaviour. These cover all aspects of
the shell; browsing the full documentation is the only good way to become acquainted with the
many possibilities. See Chapter 16 [Options], page 88.
3.4 Pattern Matching
The shell has a rich set of patterns which are available for le matching (described in the
documentation as lename generation and also known for historical reasons as globbing) and
for use when programming. These are described in Section 14.8 [Filename Generation], page 59.
Of particular interest are the following patterns that are not commonly supported by other
systems of pattern matching:
** for matching over multiple directories
~, ^ the ability to exclude patterns from matching when the EXTENDED_GLOB option is
set
(...) glob qualiers, included in parentheses at the end of the pattern, which select les
by type (such as directories) or attribute (such as size).
3.5 General Comments on Syntax
Although the syntax of zsh is in ways similar to the Korn shell, and therefore more remotely to
the original UNIX shell, the Bourne shell, its default behaviour does not entirely correspond to
those shells. General shell syntax is introduced in Chapter 6 [Shell Grammar], page 9.
One commonly encountered dierence is that variables substituted onto the command line are
not split into words. See the description of the shell option SH_WORD_SPLIT in Section 14.3
[Parameter Expansion], page 43. In zsh, you can either explicitly request the splitting (e.g.
${=foo}) or use an array when you want a variable to expand to more than one word. See
Section 15.2 [Array Parameters], page 70.
3.6 Programming
The most convenient way of adding enhancements to the shell is typically by writing a shell
function and arranging for it to be autoloaded. Functions are described in Chapter 9 [Functions],
page 20. Users changing from the C shell and its relatives should notice that aliases are less
used in zsh as they dont perform argument substitution, only simple text replacement.
A few general functions, other than those for the line editor described above, are provided with
the shell and are described in Chapter 26 [User Contributions], page 339. Features include:
promptinit
a prompt theme system for changing prompts easily, see Section 26.5 [Prompt
Themes], page 360
zsh-mime-setup
a MIME-handling system which dispatches commands according to the sux of a
le as done by graphical le managers
zcalc a calculator
zargs a version of xargs that makes the find command redundant
zmv a command for renaming les by means of shell patterns.
Chapter 4: Invocation 6
4 Invocation
4.1 Invocation
The following ags are interpreted by the shell when invoked to determine where the shell will
read commands from:
-c Take the rst argument as a command to execute, rather than reading commands
from a script or standard input. If any further arguments are given, the rst one is
assigned to $0, rather than being used as a positional parameter.
-i Force shell to be interactive. It is still possible to specify a script to execute.
-s Force shell to read commands from the standard input. If the -s ag is not present
and an argument is given, the rst argument is taken to be the pathname of a script
to execute.
If there are any remaining arguments after option processing, and neither of the options -c or -s
was supplied, the rst argument is taken as the le name of a script containing shell commands
to be executed. If the option PATH_SCRIPT is set, and the le name does not contain a directory
path (i.e. there is no / in the name), rst the current directory and then the command path
given by the variable PATH are searched for the script. If the option is not set or the le name
contains a / it is used directly.
After the rst one or two arguments have been appropriated as described above, the remaining
arguments are assigned to the positional parameters.
For further options, which are common to invocation and the set builtin, see Chapter 16 [Op-
tions], page 88.
Options may be specied by name using the -o option. -o acts like a single-letter option, but
takes a following string as the option name. For example,
zsh -x -o shwordsplit scr
runs the script scr, setting the XTRACE option by the corresponding letter -x and the
SH_WORD_SPLIT option by name. Options may be turned o by name by using +o instead of -o.
-o can be stacked up with preceding single-letter options, so for example -xo shwordsplit or
-xoshwordsplit is equivalent to -x -o shwordsplit.
Options may also be specied by name in GNU long option style, --option-name. When this
is done, - characters in the option name are permitted: they are translated into _, and thus
ignored. So, for example, zsh --sh-word-split invokes zsh with the SH_WORD_SPLIT option
turned on. Like other option syntaxes, options can be turned o by replacing the initial -
with a +; thus +-sh-word-split is equivalent to --no-sh-word-split. Unlike other option
syntaxes, GNU-style long options cannot be stacked with any other options, so for example
-x-shwordsplit is an error, rather than being treated like -x --shwordsplit.
The special GNU-style option --version is handled; it sends to standard output the shells
version information, then exits successfully. --help is also handled; it sends to standard output
a list of options that can be used when invoking the shell, then exits successfully.
Option processing may be nished, allowing following arguments that start with - or + to be
treated as normal arguments, in two ways. Firstly, a lone - (or +) as an argument by itself
ends option processing. Secondly, a special option -- (or +-), which may be specied on its
own (which is the standard POSIX usage) or may be stacked with preceding options (so -x- is
equivalent to -x --). Options are not permitted to be stacked after -- (so -x-f is an error),
but note the GNU-style option form discussed above, where --shwordsplit is permitted and
does not end option processing.
Chapter 4: Invocation 7
Except when the sh/ksh emulation single-letter options are in eect, the option -b (or +b)
ends option processing. -b is like --, except that further single-letter options can be stacked
after the -b and will take eect as normal.
4.2 Compatibility
Zsh tries to emulate sh or ksh when it is invoked as sh or ksh respectively; more precisely, it
looks at the rst letter of the name by which it was invoked, excluding any initial r (assumed
to stand for restricted), and if that is b, s or k it will emulate sh or ksh. Furthermore, if
invoked as su (which happens on certain systems when the shell is executed by the su command),
the shell will try to nd an alternative name from the SHELL environment variable and perform
emulation based on that.
In sh and ksh compatibility modes the following parameters are not special and not initialized
by the shell: ARGC, argv, cdpath, fignore, fpath, HISTCHARS, mailpath, MANPATH, manpath,
path, prompt, PROMPT, PROMPT2, PROMPT3, PROMPT4, psvar, status, watch.
The usual zsh startup/shutdown scripts are not executed. Login shells source /etc/profile
followed by $HOME/.profile. If the ENV environment variable is set on invocation, $ENV is
sourced after the prole scripts. The value of ENV is subjected to parameter expansion, command
substitution, and arithmetic expansion before being interpreted as a pathname. Note that the
PRIVILEGED option also aects the execution of startup les.
The following options are set if the shell is invoked as sh or ksh: NO_BAD_PATTERN,
NO_BANG_HIST, NO_BG_NICE, NO_EQUALS, NO_FUNCTION_ARGZERO, GLOB_SUBST,
NO_GLOBAL_EXPORT, NO_HUP, INTERACTIVE_COMMENTS, KSH_ARRAYS, NO_MULTIOS,
NO_NOMATCH, NO_NOTIFY, POSIX_BUILTINS, NO_PROMPT_PERCENT, RM_STAR_SILENT,
SH_FILE_EXPANSION, SH_GLOB, SH_OPTION_LETTERS, SH_WORD_SPLIT. Additionally
the BSD_ECHO and IGNORE_BRACES options are set if zsh is invoked as sh. Also, the
KSH_OPTION_PRINT, LOCAL_OPTIONS, PROMPT_BANG, PROMPT_SUBST and SINGLE_LINE_ZLE
options are set if zsh is invoked as ksh.
4.3 Restricted Shell
When the basename of the command used to invoke zsh starts with the letter r or the -r
command line option is supplied at invocation, the shell becomes restricted. Emulation mode is
determined after stripping the letter r from the invocation name. The following are disabled
in restricted mode:
changing directories with the cd builtin
changing or unsetting the PATH, path, MODULE_PATH, module_path, SHELL, HISTFILE,
HISTSIZE, GID, EGID, UID, EUID, USERNAME, LD_LIBRARY_PATH, LD_AOUT_LIBRARY_PATH,
LD_PRELOAD and LD_AOUT_PRELOAD parameters
specifying command names containing /
specifying command pathnames using hash
redirecting output to les
using the exec builtin command to replace the shell with another command
using jobs -Z to overwrite the shell process argument and environment space
using the ARGV0 parameter to override argv[0] for external commands
turning o restricted mode with set +r or unsetopt RESTRICTED
These restrictions are enforced after processing the startup les. The startup les should set
up PATH to point to a directory of commands which can be safely invoked in the restricted
environment. They may also add further restrictions by disabling selected builtins.
Chapter 5: Files 8
Restricted mode can also be activated any time by setting the RESTRICTED option. This imme-
diately enables all the restrictions described above even if the shell still has not processed all
startup les.
5 Files
5.1 Startup/Shutdown Files
Commands are rst read from /etc/zshenv; this cannot be overridden. Subsequent behaviour
is modied by the RCS and GLOBAL_RCS options; the former aects all startup les, while the
second only aects global startup les (those shown here with an path starting with a /). If one
of the options is unset at any point, any subsequent startup le(s) of the corresponding type
will not be read. It is also possible for a le in $ZDOTDIR to re-enable GLOBAL_RCS. Both RCS
and GLOBAL_RCS are set by default.
Commands are then read from $ZDOTDIR/.zshenv. If the shell is a login shell, commands are
read from /etc/zprofile and then $ZDOTDIR/.zprofile. Then, if the shell is interactive,
commands are read from /etc/zshrc and then $ZDOTDIR/.zshrc. Finally, if the shell is a login
shell, /etc/zlogin and $ZDOTDIR/.zlogin are read.
When a login shell exits, the les $ZDOTDIR/.zlogout and then /etc/zlogout are read. This
happens with either an explicit exit via the exit or logout commands, or an implicit exit by
reading end-of-le from the terminal. However, if the shell terminates due to execing another
process, the logout les are not read. These are also aected by the RCS and GLOBAL_RCS options.
Note also that the RCS option aects the saving of history les, i.e. if RCS is unset when the
shell exits, no history le will be saved.
If ZDOTDIR is unset, HOME is used instead. Files listed above as being in /etc may be in another
directory, depending on the installation.
As /etc/zshenv is run for all instances of zsh, it is important that it be kept as small as possible.
In particular, it is a good idea to put code that does not need to be run for every single shell
behind a test of the form if [[ -o rcs ]]; then ... so that it will not be executed when
zsh is invoked with the -f option.
5.2 Files
$ZDOTDIR/.zshenv
$ZDOTDIR/.zprofile
$ZDOTDIR/.zshrc
$ZDOTDIR/.zlogin
$ZDOTDIR/.zlogout
${TMPPREFIX}* (default is /tmp/zsh*)
/etc/zshenv
/etc/zprofile
/etc/zshrc
/etc/zlogin
/etc/zlogout (installation-specic - /etc is the default)
Any of these les may be pre-compiled with the zcompile builtin command (Chapter 17 [Shell
Builtin Commands], page 111). If a compiled le exists (named for the original le plus the
.zwc extension) and it is newer than the original le, the compiled le will be used instead.
Chapter 6: Shell Grammar 9
6 Shell Grammar
6.1 Simple Commands & Pipelines
A simple command is a sequence of optional parameter assignments followed by blank-separated
words, with optional redirections interspersed. For a description of assignment, see the beginning
of Chapter 15 [Parameters], page 70.
The rst word is the command to be executed, and the remaining words, if any, are arguments to
the command. If a command name is given, the parameter assignments modify the environment
of the command when it is executed. The value of a simple command is its exit status, or 128
plus the signal number if terminated by a signal. For example,
echo foo
is a simple command with arguments.
A pipeline is either a simple command, or a sequence of two or more simple commands where
each command is separated from the next by | or |&. Where commands are separated by |,
the standard output of the rst command is connected to the standard input of the next. |&
is shorthand for 2>&1 |, which connects both the standard output and the standard error of
the command to the standard input of the next. The value of a pipeline is the value of the last
command, unless the pipeline is preceded by ! in which case the value is the logical inverse of
the value of the last command. For example,
echo foo | sed s/foo/bar/
is a pipeline, where the output (foo plus a newline) of the rst command will be passed to the
input of the second.
If a pipeline is preceded by coproc, it is executed as a coprocess; a two-way pipe is established
between it and the parent shell. The shell can read from or write to the coprocess by means of
the >&p and <&p redirection operators or with print -p and read -p. A pipeline cannot
be preceded by both coproc and !. If job control is active, the coprocess can be treated in
other than input and output as an ordinary background job.
A sublist is either a single pipeline, or a sequence of two or more pipelines separated by &&
or ||. If two pipelines are separated by &&, the second pipeline is executed only if the rst
succeeds (returns a zero status). If two pipelines are separated by ||, the second is executed
only if the rst fails (returns a nonzero status). Both operators have equal precedence and are
left associative. The value of the sublist is the value of the last pipeline executed. For example,
dmesg | grep panic && print yes
is a sublist consisting of two pipelines, the second just a simple command which will be executed
if and only if the grep command returns a zero status. If it does not, the value of the sublist is
that return status, else it is the status returned by the print (almost certainly zero).
A list is a sequence of zero or more sublists, in which each sublist is terminated by ;, &, &|,
&!, or a newline. This terminator may optionally be omitted from the last sublist in the list
when the list appears as a complex command inside (...) or {...}. When a sublist is terminated
by ; or newline, the shell waits for it to nish before executing the next sublist. If a sublist
is terminated by a &, &|, or &!, the shell executes the last pipeline in it in the background,
and does not wait for it to nish (note the dierence from other shells which execute the whole
sublist in the background). A backgrounded pipeline returns a status of zero.
More generally, a list can be seen as a set of any shell commands whatsoever, including the
complex commands below; this is implied wherever the word list appears in later descriptions.
For example, the commands in a shell function form a special sort of list.
Chapter 6: Shell Grammar 10
6.2 Precommand Modiers
A simple command may be preceded by a precommand modier, which will alter how the
command is interpreted. These modiers are shell builtin commands with the exception of
nocorrect which is a reserved word.
- The command is executed with a - prepended to its argv[0] string.
builtin The command word is taken to be the name of a builtin command, rather than a
shell function or external command.
command [ -pvV ]
The command word is taken to be the name of an external command, rather than
a shell function or builtin. If the POSIX_BUILTINS option is set, builtins will also be
executed but certain special properties of them are suppressed. The -p ag causes
a default path to be searched instead of that in $path. With the -v ag, command
is similar to whence and with -V, it is equivalent to whence -v.
exec [ -cl ] [ -a argv0 ]
The following command together with any arguments is run in place of the current
process, rather than as a sub-process. The shell does not fork and is replaced. The
shell does not invoke TRAPEXIT, nor does it source zlogout les. The options are
provided for compatibility with other shells.
The -c option clears the environment.
The -l option is equivalent to the - precommand modier, to treat the replacement
command as a login shell; the command is executed with a - prepended to its
argv[0] string. This ag has no eect if used together with the -a option.
The -a option is used to specify explicitly the argv[0] string (the name of the
command as seen by the process itself) to be used by the replacement command
and is directly equivalent to setting a value for the ARGV0 environment variable.
nocorrect
Spelling correction is not done on any of the words. This must appear before any
other precommand modier, as it is interpreted immediately, before any parsing is
done. It has no eect in non-interactive shells.
noglob Filename generation (globbing) is not performed on any of the words.
6.3 Complex Commands
A complex command in zsh is one of the following:
if list then list [ elif list then list ] ... [ else list ] fi
The if list is executed, and if it returns a zero exit status, the then list is executed.
Otherwise, the elif list is executed and if its status is zero, the then list is executed.
If each elif list returns nonzero status, the else list is executed.
for name ... [ in word ... ] term do list done
where term is at least one newline or ;. Expand the list of words, and set the
parameter name to each of them in turn, executing list each time. If the in word
is omitted, use the positional parameters instead of the words.
More than one parameter name can appear before the list of words. If N names
are given, then on each execution of the loop the next N words are assigned to
the corresponding parameters. If there are more names than remaining words, the
remaining parameters are each set to the empty string. Execution of the loop ends
when there is no remaining word to assign to the rst name. It is only possible for
Chapter 6: Shell Grammar 11
in to appear as the rst name in the list, else it will be treated as marking the end
of the list.
for (( [expr1] ; [expr2] ; [expr3] )) do list done
The arithmetic expression expr1 is evaluated rst (see Chapter 11 [Arithmetic Eval-
uation], page 26). The arithmetic expression expr2 is repeatedly evaluated until it
evaluates to zero and when non-zero, list is executed and the arithmetic expression
expr3 evaluated. If any expression is omitted, then it behaves as if it evaluated to
1.
while list do list done
Execute the do list as long as the while list returns a zero exit status.
until list do list done
Execute the do list as long as until list returns a nonzero exit status.
repeat word do list done
word is expanded and treated as an arithmetic expression, which must evaluate to
a number n. list is then executed n times.
The repeat syntax is disabled by default when the shell starts in a mode emulating
another shell. It can be enabled with the command enable -r repeat
case word in [ [(] pattern [ | pattern ] ... ) list (;;|;&|;|) ] ... esac
Execute the list associated with the rst pattern that matches word, if any. The form
of the patterns is the same as that used for lename generation. See Section 14.8
[Filename Generation], page 59.
If the list that is executed is terminated with ;& rather than ;;, the following list
is also executed. The rule for the terminator of the following list ;;, ;& or ;| is
applied unless the esac is reached.
If the list that is executed is terminated with ;| the shell continues to scan the
patterns looking for the next match, executing the corresponding list, and applying
the rule for the corresponding terminator ;;, ;& or ;|. Note that word is not
re-expanded; all applicable patterns are tested with the same word.
select name [ in word ... term ] do list done
where term is one or more newline or ; to terminate the words. Print the set of
words, each preceded by a number. If the in word is omitted, use the positional
parameters. The PROMPT3 prompt is printed and a line is read from the line editor if
the shell is interactive and that is active, or else standard input. If this line consists
of the number of one of the listed words, then the parameter name is set to the
word corresponding to this number. If this line is empty, the selection list is printed
again. Otherwise, the value of the parameter name is set to null. The contents of
the line read from standard input is saved in the parameter REPLY. list is executed
for each selection until a break or end-of-le is encountered.
( list ) Execute list in a subshell. Traps set by the trap builtin are reset to their default
values while executing list.
{ list } Execute list.
{ try-list } always { always-list }
First execute try-list. Regardless of errors, or break, continue, or return com-
mands encountered within try-list, execute always-list. Execution then continues
from the result of the execution of try-list; in other words, any error, or break,
continue, or return command is treated in the normal way, as if always-list were
not present. The two chunks of code are referred to as the try block and the always
block.
Chapter 6: Shell Grammar 12
Optional newlines or semicolons may appear after the always; note, however, that
they may not appear between the preceding closing brace and the always.
An error in this context is a condition such as a syntax error which causes the shell
to abort execution of the current function, script, or list. Syntax errors encountered
while the shell is parsing the code do not cause the always-list to be executed. For
example, an erroneously constructed if block in try-list would cause the shell
to abort during parsing, so that always-list would not be executed, while an
erroneous substitution such as ${*foo*} would cause a run-time error, after which
always-list would be executed.
An error condition can be tested and reset with the special integer variable
TRY_BLOCK_ERROR. Outside an always-list the value is irrelevant, but it is ini-
tialised to -1. Inside always-list, the value is 1 if an error occurred in the try-
list, else 0. If TRY_BLOCK_ERROR is set to 0 during the always-list, the error
condition caused by the try-list is reset, and shell execution continues normally
after the end of always-list. Altering the value during the try-list is not useful
(unless this forms part of an enclosing always block).
Regardless of TRY_BLOCK_ERROR, after the end of always-list the normal shell
status $? is the value returned from try-list. This will be non-zero if there was
an error, even if TRY_BLOCK_ERROR was set to zero.
The following executes the given code, ignoring any errors it causes. This is an
alternative to the usual convention of protecting code by executing it in a subshell.
{
# code which may cause an error
} always {
# This code is executed regardless of the error.
(( TRY_BLOCK_ERROR = 0 ))
}
# The error condition has been reset.
An exit command (or a return command executed at the outermost function level
of a script) encountered in try-list does not cause the execution of always-list.
Instead, the shell exits immediately after any EXIT trap has been executed.
function word ... [ () ] [ term ] { list }
word ... () [ term ] { list }
word ... () [ term ] command
where term is one or more newline or ;. Dene a function which is referenced by
any one of word. Normally, only one word is provided; multiple words are usually
only useful for setting traps. The body of the function is the list between the { and
}. See Chapter 9 [Functions], page 20.
If the option SH_GLOB is set for compatibility with other shells, then whitespace
may appear between between the left and right parentheses when there is a single
word; otherwise, the parentheses will be treated as forming a globbing pattern in
that case.
time [ pipeline ]
The pipeline is executed, and timing statistics are reported on the standard error in
the form specied by the TIMEFMT parameter. If pipeline is omitted, print statistics
about the shell process and its children.
[[ exp ]] Evaluates the conditional expression exp and return a zero exit status if it is true.
See Chapter 12 [Conditional Expressions], page 30 for a description of exp.
Chapter 6: Shell Grammar 13
6.4 Alternate Forms For Complex Commands
Many of zshs complex commands have alternate forms. These are non-standard and are likely
not to be obvious even to seasoned shell programmers; they should not be used anywhere that
portability of shell code is a concern.
The short versions below only work if sublist is of the form { list } or if the SHORT_LOOPS
option is set. For the if, while and until commands, in both these cases the test part of the
loop must also be suitably delimited, such as by [[ ... ]] or (( ... )), else the end of the
test will not be recognized. For the for, repeat, case and select commands no such special
form for the arguments is necessary, but the other condition (the special form of sublist or use
of the SHORT_LOOPS option) still applies.
if list { list } [ elif list { list } ] ... [ else { list } ]
An alternate form of if. The rules mean that
if [[ -o ignorebraces ]] {
print yes
}
works, but
if true { # Does not work!
print yes
}
does not, since the test is not suitably delimited.
if list sublist
A short form of the alternate if. The same limitations on the form of list apply as
for the previous form.
for name ... ( word ... ) sublist
A short form of for.
for name ... [ in word ... ] term sublist
where term is at least one newline or ;. Another short form of for.
for (( [expr1] ; [expr2] ; [expr3] )) sublist
A short form of the arithmetic for command.
foreach name ... ( word ... ) list end
Another form of for.
while list { list }
An alternative form of while. Note the limitations on the form of list mentioned
above.
until list { list }
An alternative form of until. Note the limitations on the form of list mentioned
above.
repeat word sublist
This is a short form of repeat.
case word { [ [(] pattern [ | pattern ] ... ) list (;;|;&|;|) ] ... }
An alternative form of case.
select name [ in word term ] sublist
where term is at least one newline or ;. A short form of select.
Chapter 6: Shell Grammar 14
6.5 Reserved Words
The following words are recognized as reserved words when used as the rst word of a command
unless quoted or disabled using disable -r:
do done esac then elif else fi for case if while function repeat time until
select coproc nocorrect foreach end ! [[ { }
Additionally, } is recognized in any position if neither the IGNORE_BRACES option nor the
IGNORE_CLOSE_BRACES option is set.
6.6 Errors
Certain errors are treated as fatal by the shell: in an interactive shell, they cause control to
return to the command line, and in a non-interactive shell they cause the shell to be aborted.
In older versions of zsh, a non-interactive shell running a script would not abort completely, but
would resume execution at the next command to be read from the script, skipping the remainder
of any functions or shell constructs such as loops or conditions; this somewhat illogical behaviour
can be recovered by setting the option CONTINUE_ON_ERROR.
Fatal errors found in non-interactive shells include:
Failure to parse shell options passed when invoking the shell
Failure to change options with the set builtin
Parse errors of all sorts, including failures to parse mathematical expressions
Failures to set or modify variable behaviour with typeset, local, declare, export,
integer, float
Execution of incorrectly positioned loop control structures (continue, break)
Attempts to use regular expression with no regular expression module available
Disallowed operations when the RESTRICTED options is set
Failure to create a pipe needed for a pipeline
Failure to create a multio
Failure to autoload a module needed for a declared shell feature
Errors creating command or process substitutions
Syntax errors in glob qualiers
File generation errors where not caught by the option BAD_PATTERN
All bad patterns used for matching within case statements
File generation failures where not caused by NO_MATCH or similar options
All le generation errors where the pattern was used to create a multio
Memory errors where detected by the shell
Invalid subscripts to shell variables
Attempts to assign read-only variables
Logical errors with variables such as assignment to the wrong type
Use of invalid variable names
Errors in variable substitution syntax
Failure to convert characters in $... expressions
If the POSIX_BUILTINS option is set, more errors associated with shell builtin commands are
treated as fatal, as specied by the POSIX standard.
Chapter 6: Shell Grammar 15
6.7 Comments
In non-interactive shells, or in interactive shells with the INTERACTIVE_COMMENTS option set,
a word beginning with the third character of the histchars parameter (# by default) causes
that word and all the following characters up to a newline to be ignored.
6.8 Aliasing
Every token in the shell input is checked to see if there is an alias dened for it. If so, it is
replaced by the text of the alias if it is in command position (if it could be the rst word of a
simple command), or if the alias is global. If the text ends with a space, the next word in the
shell input is treated as though it were in command position for purposes of alias expansion.
An alias is dened using the alias builtin; global aliases may be dened using the -g option to
that builtin.
Alias expansion is done on the shell input before any other expansion except history expansion.
Therefore, if an alias is dened for the word foo, alias expansion may be avoided by quoting part
of the word, e.g. \foo. Any form of quoting works, although there is nothing to prevent an alias
being dened for the quoted form such as \foo as well. For use with completion, which would
remove an initial backslash followed by a character that isnt special, it may be more convenient
to quote the word by starting with a single quote, i.e. foo; completion will automatically add
the trailing single quote.
There is a commonly encountered problem with aliases illustrated by the following code:
alias echobar=echo bar; echobar
This prints a message that the command echobar could not be found. This happens because
aliases are expanded when the code is read in; the entire line is read in one go, so that when
echobar is executed it is too late to expand the newly dened alias. This is often a problem in
shell scripts, functions, and code executed with source or .. Consequently, use of functions
rather than aliases is recommended in non-interactive code.
Note also the unhelpful interaction of aliases and function denitions:
alias func=noglob func
func() {
echo Do something with $*
}
Because aliases are expanded in function denitions, this causes the following command to be
executed:
noglob func() {
echo Do something with $*
}
which denes noglob as well as func as functions with the body given. To avoid this, either
quote the name func or use the alternative function denition form function func. Ensuring
the alias is dened after the function works but is problematic if the code fragment might be
re-executed.
6.9 Quoting
A character may be quoted (that is, made to stand for itself) by preceding it with a \. \
followed by a newline is ignored.
A string enclosed between $ and is processed the same way as the string arguments of the
print builtin, and the resulting string is considered to be entirely quoted. A literal character
can be included in the string by using the \ escape.
Chapter 7: Redirection 16
All characters enclosed between a pair of single quotes () that is not preceded by a $ are
quoted. A single quote cannot appear within single quotes unless the option RC_QUOTES is set,
in which case a pair of single quotes are turned into a single quote. For example,
print
outputs nothing apart from a newline if RC_QUOTES is not set, but one single quote if it is set.
Inside double quotes (""), parameter and command substitution occur, and \ quotes the char-
acters \, , ", and $.
7 Redirection
If a command is followed by & and job control is not active, then the default standard input
for the command is the empty le /dev/null. Otherwise, the environment for the execution
of a command contains the le descriptors of the invoking shell as modied by input/output
specications.
The following may appear anywhere in a simple command or may precede or follow a complex
command. Expansion occurs before word or digit is used except as noted below. If the result
of substitution on word produces more than one lename, redirection occurs for each separate
lename in turn.
< word Open le word for reading as standard input.
<> word Open le word for reading and writing as standard input. If the le does not exist
then it is created.
> word Open le word for writing as standard output. If the le does not exist then it is
created. If the le exists, and the CLOBBER option is unset, this causes an error;
otherwise, it is truncated to zero length.
>| word
>! word Same as >, except that the le is truncated to zero length if it exists, even if CLOBBER
is unset.
>> word Open le word for writing in append mode as standard output. If the le does not
exist, and the CLOBBER option is unset, this causes an error; otherwise, the le is
created.
>>| word
>>! word Same as >>, except that the le is created if it does not exist, even if CLOBBER is
unset.
<<[-] word
The shell input is read up to a line that is the same as word, or to an end-of-le.
No parameter expansion, command substitution or lename generation is performed
on word. The resulting document, called a here-document, becomes the standard
input.
If any character of word is quoted with single or double quotes or a \, no inter-
pretation is placed upon the characters of the document. Otherwise, parameter and
command substitution occurs, \ followed by a newline is removed, and \ must be
used to quote the characters \, $, and the rst character of word.
Note that word itself does not undergo shell expansion. Backquotes in word do
not have their usual eect; instead they behave similarly to double quotes, except
that the backquotes themselves are passed through unchanged. (This information is
given for completeness and it is not recommended that backquotes be used.) Quotes
Chapter 7: Redirection 17
in the form $... have their standard eect of expanding backslashed references to
special characters.
If <<- is used, then all leading tabs are stripped from word and from the document.
<<< word Perform shell expansion on word and pass the result to standard input. This is
known as a here-string. Compare the use of word in here-documents above, where
word does not undergo shell expansion.
<& number
>& number
The standard input/output is duplicated from le descriptor number (see man page
dup2(2)).
<& -
>& - Close the standard input/output.
<& p
>& p The input/output from/to the coprocess is moved to the standard input/output.
>& word
&> word (Except where >& word matches one of the above syntaxes; &> can always be
used to avoid this ambiguity.) Redirects both standard output and standard error
(le descriptor 2) in the manner of > word. Note that this does not have the same
eect as > word 2>&1 in the presence of multios (see the section below).
>&| word
>&! word
&>| word
&>! word Redirects both standard output and standard error (le descriptor 2) in the manner
of >| word.
>>& word
&>> word Redirects both standard output and standard error (le descriptor 2) in the manner
of >> word.
>>&| word
>>&! word
&>>| word
&>>! word Redirects both standard output and standard error (le descriptor 2) in the manner
of >>| word.
If one of the above is preceded by a digit, then the le descriptor referred to is that specied by
the digit instead of the default 0 or 1. The order in which redirections are specied is signicant.
The shell evaluates each redirection in terms of the (le descriptor, le) association at the time
of evaluation. For example:
... 1>fname 2>&1
rst associates le descriptor 1 with le fname. It then associates le descriptor 2 with the le
associated with le descriptor 1 (that is, fname). If the order of redirections were reversed, le
descriptor 2 would be associated with the terminal (assuming le descriptor 1 had been) and
then le descriptor 1 would be associated with le fname.
The |& command separator described in Section 6.1 [Simple Commands & Pipelines], page 9
is a shorthand for 2>&1 |.
The various forms of process substitution, <(list), and =(list()) for input and >(list) for
output, are often used together with redirection. For example, if word in an output redirection
is of the form >(list) then the output is piped to the command represented by list. See
Section 14.2 [Process Substitution], page 42.
Chapter 7: Redirection 18
7.1 Opening le descriptors using parameters
When the shell is parsing arguments to a command, and the shell option IGNORE_BRACES is
not set, a dierent form of redirection is allowed: instead of a digit before the operator there
is a valid shell identier enclosed in braces. The shell will open a new le descriptor that is
guaranteed to be at least 10 and set the parameter named by the identier to the le descriptor
opened. No whitespace is allowed between the closing brace and the redirection character. For
example:
... {myfd}>&1
This opens a new le descriptor that is a duplicate of le descriptor 1 and sets the parameter
myfd to the number of the le descriptor, which will be at least 10. The new le descriptor can
be written to using the syntax >&$myfd.
The syntax {varid}>&-, for example {myfd}>&-, may be used to close a le descriptor opened in
this fashion. Note that the parameter given by varid must previously be set to a le descriptor
in this case.
It is an error to open or close a le descriptor in this fashion when the parameter is readonly.
However, it is not an error to read or write a le descriptor using <&$param or >&$param if
param is readonly.
If the option CLOBBER is unset, it is an error to open a le descriptor using a parameter that
is already set to an open le descriptor previously allocated by this mechanism. Unsetting the
parameter before using it for allocating a le descriptor avoids the error.
Note that this mechanism merely allocates or closes a le descriptor; it does not perform any
redirections from or to it. It is usually convenient to allocate a le descriptor prior to use as an
argument to exec. The syntax does not in any case work when used around complex commands
such as parenthesised subshells or loops, where the opening brace is interpreted as part of a
command list to be executed in the current shell.
The following shows a typical sequence of allocation, use, and closing of a le descriptor:
integer myfd
exec {myfd}>~/logs/mylogfile.txt
print This is a log message. >&$myfd
exec {myfd}>&-
Note that the expansion of the variable in the expression >&$myfd occurs at the point the redi-
rection is opened. This is after the expansion of command arguments and after any redirections
to the left on the command line have been processed.
7.2 Multios
If the user tries to open a le descriptor for writing more than once, the shell opens the le
descriptor as a pipe to a process that copies its input to all the specied outputs, similar to tee,
provided the MULTIOS option is set, as it is by default. Thus:
date >foo >bar
writes the date to two les, named foo and bar. Note that a pipe is an implicit redirection;
thus
date >foo | cat
writes the date to the le foo, and also pipes it to cat.
If the MULTIOS option is set, the word after a redirection operator is also subjected to lename
generation (globbing). Thus
: > *
Chapter 7: Redirection 19
will truncate all les in the current directory, assuming theres at least one. (Without the
MULTIOS option, it would create an empty le called *.) Similarly, you can do
echo exit 0 >> *.sh
If the user tries to open a le descriptor for reading more than once, the shell opens the le
descriptor as a pipe to a process that copies all the specied inputs to its output in the order
specied, similar to cat, provided the MULTIOS option is set. Thus
sort <foo <fubar
or even
sort <f{oo,ubar}
is equivalent to cat foo fubar | sort.
Expansion of the redirection argument occurs at the point the redirection is opened, at the point
described above for the expansion of the variable in >&$myfd.
Note that a pipe is an implicit redirection; thus
cat bar | sort <foo
is equivalent to cat bar foo | sort (note the order of the inputs).
If the MULTIOS option is unset, each redirection replaces the previous redirection for that le
descriptor. However, all les redirected to are actually opened, so
echo foo > bar > baz
when MULTIOS is unset will truncate bar, and write foo into baz.
There is a problem when an output multio is attached to an external program. A simple example
shows this:
cat file >file1 >file2
cat file1 file2
Here, it is possible that the second cat will not display the full contents of file1 and file2
(i.e. the original contents of file repeated twice).
The reason for this is that the multios are spawned after the cat process is forked from the parent
shell, so the parent shell does not wait for the multios to nish writing data. This means the
command as shown can exit before file1 and file2 are completely written. As a workaround,
it is possible to run the cat process as part of a job in the current shell:
{ cat file } >file >file2
Here, the {...} job will pause to wait for both les to be written.
7.3 Redirections with no command
When a simple command consists of one or more redirection operators and zero or more param-
eter assignments, but no command name, zsh can behave in several ways.
If the parameter NULLCMD is not set or the option CSH_NULLCMD is set, an error is caused. This
is the csh behavior and CSH_NULLCMD is set by default when emulating csh.
If the option SH_NULLCMD is set, the builtin : is inserted as a command with the given redirec-
tions. This is the default when emulating sh or ksh.
Otherwise, if the parameter NULLCMD is set, its value will be used as a command with the given
redirections. If both NULLCMD and READNULLCMD are set, then the value of the latter will be used
instead of that of the former when the redirection is an input. The default for NULLCMD is cat
and for READNULLCMD is more. Thus
< file
shows the contents of file on standard output, with paging if that is a terminal. NULLCMD and
READNULLCMD may refer to shell functions.
Chapter 9: Functions 20
8 Command Execution
If a command name contains no slashes, the shell attempts to locate it. If there exists a shell
function by that name, the function is invoked as described in Chapter 9 [Functions], page 20.
If there exists a shell builtin by that name, the builtin is invoked.
Otherwise, the shell searches each element of $path for a directory containing an executable
le by that name. If the search is unsuccessful, the shell prints an error message and returns a
nonzero exit status.
If execution fails because the le is not in executable format, and the le is not a directory, it is
assumed to be a shell script. /bin/sh is spawned to execute it. If the program is a le beginning
with #!, the remainder of the rst line species an interpreter for the program. The shell will
execute the specied interpreter on operating systems that do not handle this executable format
in the kernel.
If no external command is found but a function command_not_found_handler exists the shell
executes this function with all command line arguments. The function should return status
zero if it successfully handled the command, or non-zero status if it failed. In the latter case
the standard handling is applied: command not found is printed to standard error and the
shell exits with status 127. Note that the handler is executed in a subshell forked to execute
an external command, hence changes to directories, shell parameters, etc. have no eect on the
main shell.
9 Functions
Shell functions are dened with the function reserved word or the special syntax funcname
(). Shell functions are read in and stored internally. Alias names are resolved when the
function is read. Functions are executed like commands with the arguments passed as positional
parameters. (See Chapter 8 [Command Execution], page 20.)
Functions execute in the same process as the caller and share all les and present working
directory with the caller. A trap on EXIT set inside a function is executed after the function
completes in the environment of the caller.
The return builtin is used to return from function calls.
Function identiers can be listed with the functions builtin. Functions can be undened with
the unfunction builtin.
9.1 Autoloading Functions
A function can be marked as undened using the autoload builtin (or functions -u or type-
set -fu). Such a function has no body. When the function is rst executed, the shell searches
for its denition using the elements of the fpath variable. Thus to dene functions for autoload-
ing, a typical sequence is:
fpath=(~/myfuncs $fpath)
autoload myfunc1 myfunc2 ...
The usual alias expansion during reading will be suppressed if the autoload builtin or its
equivalent is given the option -U. This is recommended for the use of functions supplied with
the zsh distribution. Note that for functions precompiled with the zcompile builtin command
the ag -U must be provided when the .zwc le is created, as the corresponding information is
compiled into the latter.
For each element in fpath, the shell looks for three possible les, the newest of which is used to
load the denition for the function:
Chapter 9: Functions 21
element.zwc
A le created with the zcompile builtin command, which is expected to contain the
denitions for all functions in the directory named element. The le is treated in
the same manner as a directory containing les for functions and is searched for the
denition of the function. If the denition is not found, the search for a denition
proceeds with the other two possibilities described below.
If element already includes a .zwc extension (i.e. the extension was explicitly
given by the user), element is searched for the denition of the function without
comparing its age to that of other les; in fact, there does not need to be any
directory named element without the sux. Thus including an element such as
/usr/local/funcs.zwc in fpath will speed up the search for functions, with the
disadvantage that functions included must be explicitly recompiled by hand before
the shell notices any changes.
element/function.zwc
A le created with zcompile, which is expected to contain the denition for function.
It may include other function denitions as well, but those are neither loaded nor
executed; a le found in this way is searched only for the denition of function.
element/function
A le of zsh command text, taken to be the denition for function.
In summary, the order of searching is, rst, in the parents of directories in fpath for the newer
of either a compiled directory or a directory in fpath; second, if more than one of these contains
a denition for the function that is sought, the leftmost in the fpath is chosen; and third, within
a directory, the newer of either a compiled function or an ordinary function denition is used.
If the KSH_AUTOLOAD option is set, or the le contains only a simple denition of the function,
the les contents will be executed. This will normally dene the function in question, but may
also perform initialization, which is executed in the context of the function execution, and may
therefore dene local parameters. It is an error if the function is not dened by loading the le.
Otherwise, the function body (with no surrounding funcname() {...}) is taken to be the com-
plete contents of the le. This form allows the le to be used directly as an executable shell
script. If processing of the le results in the function being re-dened, the function itself is not
re-executed. To force the shell to perform initialization and then call the function dened, the
le should contain initialization code (which will be executed then discarded) in addition to a
complete function denition (which will be retained for subsequent calls to the function), and a
call to the shell function, including any arguments, at the end.
For example, suppose the autoload le func contains
func() { print This is func; }
print func is initialized
then func; func with KSH_AUTOLOAD set will produce both messages on the rst call, but only
the message This is func on the second and subsequent calls. Without KSH_AUTOLOAD set,
it will produce the initialization message on the rst call, and the other message on the second
and subsequent calls.
It is also possible to create a function that is not marked as autoloaded, but which loads its own
denition by searching fpath, by using autoload -X within a shell function. For example, the
following are equivalent:
myfunc() {
autoload -X
}
myfunc args...
Chapter 9: Functions 22
and
unfunction myfunc # if myfunc was defined
autoload myfunc
myfunc args...
In fact, the functions command outputs builtin autoload -X as the body of an autoloaded
function. This is done so that
eval "$(functions)"
produces a reasonable result. A true autoloaded function can be identied by the presence
of the comment # undefined in the body, because all comments are discarded from dened
functions.
To load the denition of an autoloaded function myfunc without executing myfunc, use:
autoload +X myfunc
9.2 Anonymous Functions
If no name is given for a function, it is anonymous and is handled specially. Either form of
function denition may be used: a () with no preceding name, or a function with an im-
mediately following open brace. The function is executed immediately at the point of denition
and is not stored for future use. The function name is set to (anon).
Arguments to the function may be specied as words following the closing brace dening the
function, hence if there are none no arguments (other than $0) are set. This is a dierence
from the way other functions are parsed: normal function denitions may be followed by certain
keywords such as else or fi, which will be treated as arguments to anonymous functions, so
that a newline or semicolon is needed to force keyword interpretation.
Note also that the argument list of any enclosing script or function is hidden (as would be the
case for any other function called at this point).
Redirections may be applied to the anonymous function in the same manner as to a current-shell
structure enclosed in braces. The main use of anonymous functions is to provide a scope for
local variables. This is particularly convenient in start-up les as these do not provide their own
local variable scope.
For example,
variable=outside
function {
local variable=inside
print "I am $variable with arguments $*"
} this and that
print "I am $variable"
outputs the following:
I am inside with arguments this and that
I am outside
Note that function denitions with arguments that expand to nothing, for example name=;
function $name { ... }, are not treated as anonymous functions. Instead, they are treated
as normal function denitions where the denition is silently discarded.
9.3 Special Functions
Certain functions, if dened, have special meaning to the shell.
Chapter 9: Functions 23
9.3.1 Hook Functions
For the functions below, it is possible to dene an array that has the same name as the func-
tion with _functions appended. Any element in such an array is taken as the name of a
function to execute; it is executed in the same context and with the same arguments as the
basic function. For example, if $chpwd_functions is an array containing the values mychpwd,
chpwd_save_dirstack, then the shell attempts to execute the functions chpwd, mychpwd
and chpwd_save_dirstack, in that order. Any function that does not exist is silently ignored.
A function found by this mechanism is referred to elsewhere as a hook function. An error in
any function causes subsequent functions not to be run. Note further that an error in a precmd
hook causes an immediately following periodic function not to run (though it may run at the
next opportunity).
chpwd Executed whenever the current working directory is changed.
periodic If the parameter PERIOD is set, this function is executed every $PERIOD seconds,
just before a prompt. Note that if multiple functions are dened using the array
periodic_functions only one period is applied to the complete set of functions,
and the scheduled time is not reset if the list of functions is altered. Hence the set
of functions is always called together.
precmd Executed before each prompt. Note that precommand functions are not re-executed
simply because the command line is redrawn, as happens, for example, when a
notication about an exiting job is displayed.
preexec Executed just after a command has been read and is about to be executed. If
the history mechanism is active (and the line was not discarded from the history
buer), the string that the user typed is passed as the rst argument, otherwise it
is an empty string. The actual command that will be executed (including expanded
aliases) is passed in two dierent forms: the second argument is a single-line, size-
limited version of the command (with things like function bodies elided); the third
argument contains the full text that is being executed.
zshaddhistory
Executed when a history line has been read interactively, but before it is executed.
The sole argument is the complete history line (so that any terminating newline will
still be present).
If any of the hook functions returns status 1 (or any non-zero value other than 2,
though this is not guaranteed for future versions of the shell) the history line will not
be saved, although it lingers in the history until the next line is executed, allowing
you to reuse or edit it immediately.
If any of the hook functions returns status 2 the history line will be saved on the
internal history list, but not written to the history le. In case of a conict, the rst
non-zero status value is taken.
A hook function may call fc -p ... to switch the history context so that the history
is saved in a dierent le from the that in the global HISTFILE parameter. This is
handled specially: the history context is automatically restored after the processing
of the history line is nished.
The following example function works with one of the options INC_APPEND_HISTORY
or SHARE_HISTORY set, in order that the line is written out immediately after the
history entry is added. It rst adds the history line to the normal history with the
newline stripped, which is usually the correct behaviour. Then it switches the history
context so that the line will be written to a history le in the current directory.
Chapter 9: Functions 24
zshaddhistory() {
print -sr -- ${1%%$\n}
fc -p .zsh_local_history
}
zshexit Executed at the point where the main shell is about to exit normally. This is not
called by exiting subshells, nor when the exec precommand modier is used before
an external command. Also, unlike TRAPEXIT, it is not called when functions exit.
9.3.2 Trap Functions
The functions below are treated specially but do not have corresponding hook arrays.
TRAPNAL If dened and non-null, this function will be executed whenever the shell catches a
signal SIGNAL, where NAL is a signal name as specied for the kill builtin. The
signal number will be passed as the rst parameter to the function.
If a function of this form is dened and null, the shell and processes spawned by it
will ignore SIGNAL.
The return status from the function is handled specially. If it is zero, the signal is
assumed to have been handled, and execution continues normally. Otherwise, the
shell will behave as interrupted except that the return status of the trap is retained.
Programs terminated by uncaught signals typically return the status 128 plus the
signal number. Hence the following causes the handler for SIGINT to print a message,
then mimic the usual eect of the signal.
TRAPINT() {
print "Caught SIGINT, aborting."
return $(( 128 + $1 ))
}
The functions TRAPZERR, TRAPDEBUG and TRAPEXIT are never executed inside other
traps.
TRAPDEBUG
If the option DEBUG_BEFORE_CMD is set (as it is by default), executed before each
command; otherwise executed after each command. See the description of the trap
builtin in Chapter 17 [Shell Builtin Commands], page 111 for details of additional
features provided in debug traps.
TRAPEXIT Executed when the shell exits, or when the current function exits if dened inside a
function. The value of $? at the start of execution is the exit status of the shell or
the return status of the function exiting.
TRAPZERR Executed whenever a command has a non-zero exit status. However, the function
is not executed if the command occurred in a sublist followed by && or ||; only
the nal command in a sublist of this type causes the trap to be executed. The
function TRAPERR acts the same as TRAPZERR on systems where there is no SIGERR
(this is the usual case).
The functions beginning TRAP may alternatively be dened with the trap builtin: this may be
preferable for some uses. Setting a trap with one form removes any trap of the other form for
the same signal; removing a trap in either form removes all traps for the same signal. The forms
TRAPNAL() {
# code
}
(function traps) and
Chapter 10: Jobs & Signals 25
trap
# code
NAL
(list traps) are equivalent in most ways, the exceptions being the following:
Function traps have all the properties of normal functions, appearing in the list of functions
and being called with their own function context rather than the context where the trap
was triggered.
The return status from function traps is special, whereas a return from a list trap causes
the surrounding context to return with the given status.
Function traps are not reset within subshells, in accordance with zsh behaviour; list traps
are reset, in accordance with POSIX behaviour.
10 Jobs & Signals
10.1 Jobs
If the MONITOR option is set, an interactive shell associates a job with each pipeline. It keeps a
table of current jobs, printed by the jobs command, and assigns them small integer numbers.
When a job is started asynchronously with &, the shell prints a line to standard error which
looks like:
[1] 1234
indicating that the job which was started asynchronously was job number 1 and had one (top-
level) process, whose process ID was 1234.
If a job is started with &| or &!, then that job is immediately disowned. After startup, it does
not have a place in the job table, and is not subject to the job control features described here.
If you are running a job and wish to do something else you may hit the key ^Z (control-Z)
which sends a TSTP signal to the current job: this key may be redened by the susp option
of the external stty command. The shell will then normally indicate that the job has been
suspended, and print another prompt. You can then manipulate the state of this job, putting
it in the background with the bg command, or run some other commands and then eventually
bring the job back into the foreground with the foreground command fg. A ^Z takes eect
immediately and is like an interrupt in that pending output and unread input are discarded
when it is typed.
A job being run in the background will suspend if it tries to read from the terminal.
Note that if the job running in the foreground is a shell function, then suspending it will have
the eect of causing the shell to fork. This is necessary to separate the functions state from
that of the parent shell performing the job control, so that the latter can return to the command
line prompt. As a result, even if fg is used to continue the job the function will no longer be
part of the parent shell, and any variables set by the function will not be visible in the parent
shell. Thus the behaviour is dierent from the case where the function was never suspended.
Zsh is dierent from many other shells in this regard.
The same behaviour is found when the shell is executing code as the right hand side of a pipeline
or any complex shell construct such as if, for, etc., in order that the entire block of code can be
managed as a single job. Background jobs are normally allowed to produce output, but this can
be disabled by giving the command stty tostop. If you set this tty option, then background
jobs will suspend when they try to produce output like they do when they try to read input.
When a command is suspended and continued later with the fg or wait builtins, zsh restores
tty modes that were in eect when it was suspended. This (intentionally) does not apply if the
command is continued via kill -CONT, nor when it is continued with bg.
Chapter 11: Arithmetic Evaluation 26
There are several ways to refer to jobs in the shell. A job can be referred to by the process ID
of any process of the job or by one of the following:
%number The job with the given number.
%string Any job whose command line begins with string.
%?string Any job whose command line contains string.
%% Current job.
%+ Equivalent to %%.
%- Previous job.
The shell learns immediately whenever a process changes state. It normally informs you when-
ever a job becomes blocked so that no further progress is possible. If the NOTIFY option is not
set, it waits until just before it prints a prompt before it informs you. All such notications are
sent directly to the terminal, not to the standard output or standard error.
When the monitor mode is on, each background job that completes triggers any trap set for
CHLD.
When you try to leave the shell while jobs are running or suspended, you will be warned that
You have suspended (running) jobs. You may use the jobs command to see what they are.
If you do this or immediately try to exit again, the shell will not warn you a second time; the
suspended jobs will be terminated, and the running jobs will be sent a SIGHUP signal, if the HUP
option is set.
To avoid having the shell terminate the running jobs, either use the nohup command (see man
page nohup(1)) or the disown builtin.
10.2 Signals
The INT and QUIT signals for an invoked command are ignored if the command is followed by &
and the MONITOR option is not active. The shell itself always ignores the QUIT signal. Otherwise,
signals have the values inherited by the shell from its parent (but see the TRAPNAL special
functions in Chapter 9 [Functions], page 20).
Certain jobs are run asynchronously by the shell other than those explicitly put into the back-
ground; even in cases where the shell would usually wait for such jobs, an explicit exit command
or exit due to the option ERR_EXIT will cause the shell to exit without waiting. Examples of such
asynchronous jobs are process substitution, see Section 14.2 [Process Substitution], page 42, and
the handler processes for multios, see the section Multios in Chapter 7 [Redirection], page 16.
11 Arithmetic Evaluation
The shell can perform integer and oating point arithmetic, either using the builtin let, or via
a substitution of the form $((...)). For integers, the shell is usually compiled to use 8-byte
precision where this is available, otherwise precision is 4 bytes. This can be tested, for example,
by giving the command print - $(( 12345678901 )); if the number appears unchanged,
the precision is at least 8 bytes. Floating point arithmetic always uses the double type with
whatever corresponding precision is provided by the compiler and the library.
The let builtin command takes arithmetic expressions as arguments; each is evaluated sepa-
rately. Since many of the arithmetic operators, as well as spaces, require quoting, an alternative
form is provided: for any command which begins with a ((, all the characters until a matching
)) are treated as a quoted expression and arithmetic expansion performed as for an argument of
let. More precisely, ((...)) is equivalent to let "...". The return status is 0 if the arithmetic
value of the expression is non-zero, 1 if it is zero, and 2 if an error occurred.
Chapter 11: Arithmetic Evaluation 27
For example, the following statement
(( val = 2 + 1 ))
is equivalent to
let "val = 2 + 1"
both assigning the value 3 to the shell variable val and returning a zero status.
Integers can be in bases other than 10. A leading 0x or 0X denotes hexadecimal. Integers
may also be of the form base#n, where base is a decimal number between two and thirty-six
representing the arithmetic base and n is a number in that base (for example, 16#ff is 255 in
hexadecimal). The base# may also be omitted, in which case base 10 is used. For backwards
compatibility the form [base]n is also accepted.
An integer expression or a base given in the form base#n may contain underscores (_) after
the leading digit for visual guidance; these are ignored in computation. Examples are 1_000_000
or 0xffff_ffff which are equivalent to 1000000 and 0xffffffff respectively.
It is also possible to specify a base to be used for output in the form [#base], for example
[#16]. This is used when outputting arithmetical substitutions or when assigning to scalar
parameters, but an explicitly dened integer or oating point parameter will not be aected. If
an integer variable is implicitly dened by an arithmetic expression, any base specied in this
way will be set as the variables output arithmetic base as if the option -i base to the typeset
builtin had been used. The expression has no precedence and if it occurs more than once in
a mathematical expression, the last encountered is used. For clarity it is recommended that it
appear at the beginning of an expression. As an example:
typeset -i 16 y
print $(( [#8] x = 32, y = 32 ))
print $x $y
outputs rst 8#40, the rightmost value in the given output base, and then 8#40 16#20,
because y has been explicitly declared to have output base 16, while x (assuming it does not
already exist) is implicitly typed by the arithmetic evaluation, where it acquires the output base
8.
The base may be replaced or followed by an underscore, which may itself be followed by a
positive integer (if it is missing the value 3 is used). This indicates that underscores should be
inserted into the output string, grouping the number for visual clarity. The following integer
species the number of digits to group together. For example:
setopt cbases
print $(( [#16_4] 65536 ** 2 ))
outputs 0x1_0000_0000.
The feature can be used with oating point numbers, in which case the base must be omitted;
grouping is away from the decimal point. For example,
zmodload zsh/mathfunc
print $(( [#_] sqrt(1e7) ))
outputs 3_162.277_660_168_379_5 (the number of decimal places shown may vary).
If the C_BASES option is set, hexadecimal numbers in the standard C format, for example 0xFF
instead of the usual 16#FF. If the option OCTAL_ZEROES is also set (it is not by default), octal
numbers will be treated similarly and hence appear as 077 instead of 8#77. This option has
no eect on the output of bases other than hexadecimal and octal, and these formats are always
understood on input.
When an output base is specied using the [#base] syntax, an appropriate base prex will be
output if necessary, so that the value output is valid syntax for input. If the # is doubled, for
example [##16], then no base prex is output.
Chapter 11: Arithmetic Evaluation 28
Floating point constants are recognized by the presence of a decimal point or an exponent. The
decimal point may be the rst character of the constant, but the exponent character e or E may
not, as it will be taken for a parameter name. All numeric parts (before and after the decimal
point and in the exponent) may contain underscores after the leading digit for visual guidance;
these are ignored in computation.
An arithmetic expression uses nearly the same syntax and associativity of expressions as in C.
In the native mode of operation, the following operators are supported (listed in decreasing
order of precedence):
+ - ! ~ ++ --
unary plus/minus, logical NOT, complement, {pre,post}{in,de}crement
<< >> bitwise shift left, right
& bitwise AND
^ bitwise XOR
| bitwise OR
** exponentiation
* / % multiplication, division, modulus (remainder)
+ - addition, subtraction
< > <= >=
comparison
== != equality and inequality
&& logical AND
|| ^^ logical OR, XOR
? : ternary operator
= += -= *= /= %= &= ^= |= <<= >>= &&= ||= ^^= **=
assignment
, comma operator
The operators &&, ||, &&=, and ||= are short-circuiting, and only one of the latter two
expressions in a ternary operator is evaluated. Note the precedence of the bitwise AND, OR,
and XOR operators.
With the option C_PRECEDENCES the precedences (but no other properties) of the operators are
altered to be the same as those in most other languages that support the relevant operators:
+ - ! ~ ++ --
unary plus/minus, logical NOT, complement, {pre,post}{in,de}crement
** exponentiation
* / % multiplication, division, modulus (remainder)
+ - addition, subtraction
<< >> bitwise shift left, right
< > <= >=
comparison
== != equality and inequality
& bitwise AND
Chapter 11: Arithmetic Evaluation 29
^ bitwise XOR
| bitwise OR
&& logical AND
^^ logical XOR
|| logical OR
? : ternary operator
= += -= *= /= %= &= ^= |= <<= >>= &&= ||= ^^= **=
assignment
, comma operator
Note the precedence of exponentiation in both cases is below that of unary operators, hence
-3**2 evaluates as 9, not -9. Use parentheses where necessary: -(3**2). This is for
compatibility with other shells.
Mathematical functions can be called with the syntax func(args), where the function decides
if the args is used as a string or a comma-separated list of arithmetic expressions. The shell
currently denes no mathematical functions by default, but the module zsh/mathfunc may be
loaded with the zmodload builtin to provide standard oating point mathematical functions.
An expression of the form ##x where x is any character sequence such as a, ^A, or \M-\C-x
gives the value of this character and an expression of the form #foo gives the value of the rst
character of the contents of the parameter foo. Character values are according to the character
set used in the current locale; for multibyte character handling the option MULTIBYTE must be
set. Note that this form is dierent from $#foo, a standard parameter substitution which gives
the length of the parameter foo. #\ is accepted instead of ##, but its use is deprecated.
Named parameters and subscripted arrays can be referenced by name within an arithmetic
expression without using the parameter expansion syntax. For example,
((val2 = val1 * 2))
assigns twice the value of $val1 to the parameter named val2.
An internal integer representation of a named parameter can be specied with the integer
builtin. Arithmetic evaluation is performed on the value of each assignment to a named param-
eter declared integer in this manner. Assigning a oating point number to an integer results in
rounding down to the next integer.
Likewise, oating point numbers can be declared with the float builtin; there are two types,
diering only in their output format, as described for the typeset builtin. The output format
can be bypassed by using arithmetic substitution instead of the parameter substitution, i.e.
${oat} uses the dened format, but $((oat)) uses a generic oating point format.
Promotion of integer to oating point values is performed where necessary. In addition, if any
operator which requires an integer (~, &, |, ^, %, <<, >> and their equivalents with
assignment) is given a oating point argument, it will be silently rounded down to the next
integer.
Scalar variables can hold integer or oating point values at dierent times; there is no memory
of the numeric type in this case.
If a variable is rst assigned in a numeric context without previously being declared, it will be
implicitly typed as integer or float and retain that type either until the type is explicitly
changed or until the end of the scope. This can have unforeseen consequences. For example, in
the loop
for (( f = 0; f < 1; f += 0.1 )); do
# use $f
Chapter 12: Conditional Expressions 30
done
if f has not already been declared, the rst assignment will cause it to be created as an integer,
and consequently the operation f += 0.1 will always cause the result to be truncated to zero,
so that the loop will fail. A simple x would be to turn the initialization into f = 0.0. It is
therefore best to declare numeric variables with explicit types.
12 Conditional Expressions
A conditional expression is used with the [[ compound command to test attributes of les and
to compare strings. Each expression can be constructed from one or more of the following unary
or binary expressions:
-a le true if le exists.
-b le true if le exists and is a block special le.
-c le true if le exists and is a character special le.
-d le true if le exists and is a directory.
-e le true if le exists.
-f le true if le exists and is a regular le.
-g le true if le exists and has its setgid bit set.
-h le true if le exists and is a symbolic link.
-k le true if le exists and has its sticky bit set.
-n string true if length of string is non-zero.
-o option true if option named option is on. option may be a single character, in which case
it is a single letter option name. (See Section 16.1 [Specifying Options], page 88.)
-p le true if le exists and is a FIFO special le (named pipe).
-r le true if le exists and is readable by current process.
-s le true if le exists and has size greater than zero.
-t fd true if le descriptor number fd is open and associated with a terminal device. (note:
fd is not optional)
-u le true if le exists and has its setuid bit set.
-w le true if le exists and is writable by current process.
-x le true if le exists and is executable by current process. If le exists and is a directory,
then the current process has permission to search in the directory.
-z string true if length of string is zero.
-L le true if le exists and is a symbolic link.
-O le true if le exists and is owned by the eective user ID of this process.
-G le true if le exists and its group matches the eective group ID of this process.
-S le true if le exists and is a socket.
-N le true if le exists and its access time is not newer than its modication time.
le1 -nt le2
true if le1 exists and is newer than le2.
Chapter 12: Conditional Expressions 31
le1 -ot le2
true if le1 exists and is older than le2.
le1 -ef le2
true if le1 and le2 exist and refer to the same le.
string = pattern
string == pattern
true if string matches pattern. The == form is the preferred one. The = form is
for backward compatibility and should be considered obsolete.
string != pattern
true if string does not match pattern.
string =~ regexp
true if string matches the regular expression regexp. If the option RE_MATCH_PCRE is
set regexp is tested as a PCRE regular expression using the zsh/pcre module, else
it is tested as a POSIX extended regular expression using the zsh/regex module.
Upon successful match, some variables will be updated; no variables are changed if
the matching fails.
If the option BASH_REMATCH is not set the scalar parameter MATCH is set to the
substring that matched the pattern and the integer parameters MBEGIN and MEND to
the index of the start and end, respectively, of the match in string, such that if string
is contained in variable var the expression ${var[$MBEGIN,$MEND]} is identical
to $MATCH. The setting of the option KSH_ARRAYS is respected. Likewise, the
array match is set to the substrings that matched parenthesised subexpressions and
the arrays mbegin and mend to the indices of the start and end positions, respectively,
of the substrings within string. The arrays are not set if there were no parenthesised
subexpresssions. For example, if the string a short string is matched against
the regular expression s(...)t, then (assuming the option KSH_ARRAYS is not set)
MATCH, MBEGIN and MEND are short, 3 and 7, respectively, while match, mbegin and
mend are single entry arrays containing the strings hor, 4 and 6, respectively.
If the option BASH_REMATCH is set the array BASH_REMATCH is set to the substring
that matched the pattern followed by the substrings that matched parenthesised
subexpressions within the pattern.
string1 < string2
true if string1 comes before string2 based on ASCII value of their characters.
string1 > string2
true if string1 comes after string2 based on ASCII value of their characters.
exp1 -eq exp2
true if exp1 is numerically equal to exp2. Note that for purely numeric comparisons
use of the ((...)) builtin described in Chapter 11 [Arithmetic Evaluation], page 26
is more convenient than conditional expressions.
exp1 -ne exp2
true if exp1 is numerically not equal to exp2.
exp1 -lt exp2
true if exp1 is numerically less than exp2.
exp1 -gt exp2
true if exp1 is numerically greater than exp2.
exp1 -le exp2
true if exp1 is numerically less than or equal to exp2.
Chapter 12: Conditional Expressions 32
exp1 -ge exp2
true if exp1 is numerically greater than or equal to exp2.
( exp ) true if exp is true.
! exp true if exp is false.
exp1 && exp2
true if exp1 and exp2 are both true.
exp1 || exp2
true if either exp1 or exp2 is true.
For compatibility, if there is a single argument that is not syntactically signicant, typically a
variable, the condition is treated as a test for whether the expression expands as a string of
non-zero length. In other words, [[ $var ]] is the same as [[ -n $var ]]. It is recommended
that the second, explicit, form be used where possible.
Normal shell expansion is performed on the le, string and pattern arguments, but the result of
each expansion is constrained to be a single word, similar to the eect of double quotes.
Filename generation is not performed on any form of argument to conditions. However, it can
be forced in any case where normal shell expansion is valid and when the option EXTENDED_GLOB
is in eect by using an explicit glob qualier of the form (#q) at the end of the string. A
normal glob qualier expression may appear between the q and the closing parenthesis; if
none appears the expression has no eect beyond causing lename generation. The results of
lename generation are joined together to form a single word, as with the results of other forms
of expansion.
This special use of lename generation is only available with the [[ syntax. If the condition
occurs within the [ or test builtin commands then globbing occurs instead as part of normal
command line expansion before the condition is evaluated. In this case it may generate multiple
words which are likely to confuse the syntax of the test command.
For example,
[[ -n file*(#qN) ]]
produces status zero if and only if there is at least one le in the current directory beginning
with the string file. The globbing qualier N ensures that the expression is empty if there is
no matching le.
Pattern metacharacters are active for the pattern arguments; the patterns are the same as those
used for lename generation, see Section 14.8 [Filename Generation], page 59, but there is no
special behaviour of / nor initial dots, and no glob qualiers are allowed.
In each of the above expressions, if le is of the form /dev/fd/n, where n is an integer, then
the test applied to the open le whose descriptor number is n, even if the underlying system
does not support the /dev/fd directory.
In the forms which do numeric comparison, the expressions exp undergo arithmetic expansion
as if they were enclosed in $((...)).
For example, the following:
[[ ( -f foo || -f bar ) && $report = y* ]] && print File exists.
tests if either le foo or le bar exists, and if so, if the value of the parameter report begins
with y; if the complete condition is true, the message File exists. is printed.
Chapter 13: Prompt Expansion 33
13 Prompt Expansion
13.1 Expansion of Prompt Sequences
Prompt sequences undergo a special form of expansion. This type of expansion is also available
using the -P option to the print builtin.
If the PROMPT_SUBST option is set, the prompt string is rst subjected to parameter expansion,
command substitution and arithmetic expansion. See Chapter 14 [Expansion], page 37.
Certain escape sequences may be recognised in the prompt string.
If the PROMPT_BANG option is set, a ! in the prompt is replaced by the current history event
number. A literal ! may then be represented as !!.
If the PROMPT_PERCENT option is set, certain escape sequences that start with % are expanded.
Many escapes are followed by a single character, although some of these take an optional integer
argument that should appear between the % and the next character of the sequence. More
complicated escape sequences are available to provide conditional expansion.
13.2 Simple Prompt Escapes
13.2.1 Special characters
%% A %.
%) A ).
13.2.2 Login information
%l The line (tty) the user is logged in on, without /dev/ prex. If the name starts
with /dev/tty, that prex is stripped.
%M The full machine hostname.
%m The hostname up to the rst .. An integer may follow the % to specify how
many components of the hostname are desired. With a negative integer, trailing
components of the hostname are shown.
%n $USERNAME.
%y The line (tty) the user is logged in on, without /dev/ prex. This does not treat
/dev/tty names specially.
13.2.3 Shell state
%# A # if the shell is running with privileges, a % if not. Equivalent to %(!.#.%%).
The denition of privileged, for these purposes, is that either the eective user ID
is zero, or, if POSIX.1e capabilities are supported, that at least one capability is
raised in either the Eective or Inheritable capability vectors.
%? The return status of the last command executed just before the prompt.
%_ The status of the parser, i.e. the shell constructs (like if and for) that have been
started on the command line. If given an integer number that many strings will be
printed; zero or negative or no integer means print as many as there are. This is
most useful in prompts PS2 for continuation lines and PS4 for debugging with the
XTRACE option; in the latter case it will also work non-interactively.
Chapter 13: Prompt Expansion 34
%d
/ Current working directory. If an integer follows the %, it species a number of
trailing components of the current working directory to show; zero means the whole
path. A negative integer species leading components, i.e. %-1d species the rst
component.
%~ As %d and %/, but if the current working directory starts with $HOME, that part is
replaced by a ~. Furthermore, if it has a named directory as its prex, that part
is replaced by a ~ followed by the name of the directory, but only if the result is
shorter than the full path; Section 14.7 [Filename Expansion], page 57.
%h
%! Current history event number.
%i The line number currently being executed in the script, sourced le, or shell function
given by %N. This is most useful for debugging as part of $PS4.
%I The line number currently being executed in the le %x. This is similar to %i, but
the line number is always a line number in the le where the code was dened, even
if the code is a shell function.
%j The number of jobs.
%L The current value of $SHLVL.
%N The name of the script, sourced le, or shell function that zsh is currently executing,
whichever was started most recently. If there is none, this is equivalent to the
parameter $0. An integer may follow the % to specify a number of trailing path
components to show; zero means the full path. A negative integer species leading
components.
%x The name of the le containing the source code currently being executed. This
behaves as %N except that function and eval command names are not shown, instead
the le where they were dened.
%c
%.
%C Trailing component of the current working directory. An integer may follow the %
to get more than one component. Unless %C is used, tilde contraction is performed
rst. These are deprecated as %c and %C are equivalent to %1~ and %1/, respectively,
while explicit positive integers have the same eect as for the latter two sequences.
13.2.4 Date and time
%D The date in yy-mm-dd format.
%T Current time of day, in 24-hour format.
%t
%@ Current time of day, in 12-hour, am/pm format.
%* Current time of day in 24-hour format, with seconds.
%w The date in day-dd format.
%W The date in mm/dd/yy format.
%D{string}
string is formatted using the strftime function. See man page strftime(3) for more
details. Various zsh extensions provide numbers with no leading zero or space if the
number is a single digit:
%f a day of the month
Chapter 13: Prompt Expansion 35
%K the hour of the day on the 24-hour clock
%L the hour of the day on the 12-hour clock
In addition, if the system supports the POSIX gettimeofday system call, %. pro-
vides decimal fractions of a second since the epoch with leading zeroes. By default
three decimal places are provided, but a number of digits up to 6 may be given
following the %; hence %6. outputs microseconds. A typical example of this is the
format %D{%H:%M:%S.%.}.
The GNU extension that a - between the % and the format character causes a
leading zero or space to be stripped is handled directly by the shell for the format
characters d, f, H, k, l, m, M, S and y; any other format characters are provided
to strftime() with any leading -, present, so the handling is system dependent.
Further GNU extensions are not supported at present.
13.2.5 Visual eects
%B (%b) Start (stop) boldface mode.
%E Clear to end of line.
%U (%u) Start (stop) underline mode.
%S (%s) Start (stop) standout mode.
%F (%f) Start (stop) using a dierent foreground colour, if supported by the terminal. The
colour may be specied two ways: either as a numeric argument, as normal, or by
a sequence in braces following the %F, for example %F{red}. In the latter case the
values allowed are as described for the fg zle_highlight attribute; Section 18.7
[Character Highlighting], page 173. This means that numeric colours are allowed in
the second format also.
%K (%k) Start (stop) using a dierent bacKground colour. The syntax is identical to that for
%F and %f.
%{...%} Include a string as a literal escape sequence. The string within the braces should
not change the cursor position. Brace pairs can nest.
A positive numeric argument between the % and the { is treated as described for %G
below.
%G Within a %{...%} sequence, include a glitch: that is, assume that a single character
width will be output. This is useful when outputting characters that otherwise
cannot be correctly handled by the shell, such as the alternate character set on
some terminals. The characters in question can be included within a %{...%} sequence
together with the appropriate number of %G sequences to indicate the correct width.
An integer between the % and G indicates a character width other than one.
Hence %{seq%2G%} outputs seq and assumes it takes up the width of two standard
characters.
Multiple uses of %G accumulate in the obvious fashion; the position of the %G is
unimportant. Negative integers are not handled.
Note that when prompt truncation is in use it is advisable to divide up output into
single characters within each %{...%} group so that the correct truncation point can
be found.
Chapter 13: Prompt Expansion 36
13.3 Conditional Substrings in Prompts
%v The value of the rst element of the psvar array parameter. Following the % with
an integer gives that element of the array. Negative integers count from the end of
the array.
%(x.true-text.false-text)
Species a ternary expression. The character following the x is arbitrary; the same
character is used to separate the text for the true result from that for the false
result. This separator may not appear in the true-text, except as part of a %-
escape sequence. A ) may appear in the false-text as %). true-text and false-
text may both contain arbitrarily-nested escape sequences, including further ternary
expressions.
The left parenthesis may be preceded or followed by a positive integer n, which
defaults to zero. A negative integer will be multiplied by -1, except as noted below
for l. The test character x may be any of the following:
! True if the shell is running with privileges.
# True if the eective uid of the current process is n.
? True if the exit status of the last command was n.
_ True if at least n shell constructs were started.
C
/ True if the current absolute path has at least n elements relative to the
root directory, hence / is counted as 0 elements.
c
.
~ True if the current path, with prex replacement, has at least n elements
relative to the root directory, hence / is counted as 0 elements.
D True if the month is equal to n (January = 0).
d True if the day of the month is equal to n.
g True if the eective gid of the current process is n.
j True if the number of jobs is at least n.
L True if the SHLVL parameter is at least n.
l True if at least n characters have already been printed on the current
line. When n is negative, true if at least abs(n) characters remain
before the opposite margin (thus the left margin for RPROMPT).
S True if the SECONDS parameter is at least n.
T True if the time in hours is equal to n.
t True if the time in minutes is equal to n.
v True if the array psvar has at least n elements.
V True if element n of the array psvar is set and non-empty.
w True if the day of the week is equal to n (Sunday = 0).
%<string<
%>string>
%[xstring]
Species truncation behaviour for the remainder of the prompt string. The third,
deprecated, form is equivalent to %xstringx, i.e. x may be < or >. The string
Chapter 14: Expansion 37
will be displayed in place of the truncated portion of any string; note this does not
undergo prompt expansion.
The numeric argument, which in the third form may appear immediately after
the [, species the maximum permitted length of the various strings that can
be displayed in the prompt. In the rst two forms, this numeric argument may
be negative, in which case the truncation length is determined by subtracting the
absolute value of the numeric argument from the number of character positions
remaining on the current prompt line. If this results in a zero or negative length,
a length of 1 is used. In other words, a negative argument arranges that after
truncation at least n characters remain before the right margin (left margin for
RPROMPT).
The forms with < truncate at the left of the string, and the forms with > truncate
at the right of the string. For example, if the current directory is /home/pike,
the prompt %8<..<%/ will expand to ..e/pike. In this string, the terminating
character (<, > or ]), or in fact any character, may be quoted by a preceding
\; note when using print -P, however, that this must be doubled as the string is
also subject to standard print processing, in addition to any backslashes removed
by a double quoted string: the worst case is therefore print -P "%<\\\\<<...".
If the string is longer than the specied truncation length, it will appear in full,
completely replacing the truncated string.
The part of the prompt string to be truncated runs to the end of the string, or to
the end of the next enclosing group of the %( construct, or to the next truncation
encountered at the same grouping level (i.e. truncations inside a %( are separate),
which ever comes rst. In particular, a truncation with argument zero (e.g., %<<)
marks the end of the range of the string to be truncated while turning o truncation
from there on. For example, the prompt %10<...<%~%<<%# will print a trun-
cated representation of the current directory, followed by a % or #, followed by a
space. Without the %<<, those two characters would be included in the string to
be truncated. Note that %-0<< is a distinct
Truncation applies only within each individual line of the prompt, as delimited
by embedded newlines (if any). If the total length of any line of the prompt after
truncation is greater than the terminal width, or if the part to be truncated contains
embedded newlines, truncation behavior is undened and may change in a future
version of the shell. Use %-n(l.true-text.false-text) to remove parts of the
prompt when the available space is less than n.
14 Expansion
The following types of expansions are performed in the indicated order in ve steps:
History Expansion
This is performed only in interactive shells.
Alias Expansion
Aliases are expanded immediately before the command line is parsed as explained
in Section 6.8 [Aliasing], page 15.
Chapter 14: Expansion 38
Process Substitution
Parameter Expansion
Command Substitution
Arithmetic Expansion
Brace Expansion
These ve are performed in one step in left-to-right fashion. After these expansions,
all unquoted occurrences of the characters \, and " are removed.
Filename Expansion
If the SH_FILE_EXPANSION option is set, the order of expansion is modied for com-
patibility with sh and ksh. In that case lename expansion is performed immediately
after alias expansion, preceding the set of ve expansions mentioned above.
Filename Generation
This expansion, commonly referred to as globbing, is always done last.
The following sections explain the types of expansion in detail.
14.1 History Expansion
History expansion allows you to use words from previous command lines in the command line
you are typing. This simplies spelling corrections and the repetition of complicated commands
or arguments.
Immediately before execution, each command is saved in the history list, the size of which is
controlled by the HISTSIZE parameter. The one most recent command is always retained in any
case. Each saved command in the history list is called a history event and is assigned a number,
beginning with 1 (one) when the shell starts up. The history number that you may see in your
prompt (see Chapter 13 [Prompt Expansion], page 33) is the number that is to be assigned to
the next command.
14.1.1 Overview
A history expansion begins with the rst character of the histchars parameter, which is ! by
default, and may occur anywhere on the command line; history expansions do not nest. The
! can be escaped with \ or can be enclosed between a pair of single quotes () to suppress
its special meaning. Double quotes will not work for this. Following this history character is
an optional event designator (Section 14.1.2 [Event Designators], page 39) and then an optional
word designator (Section 14.1.3 [Word Designators], page 39); if neither of these designators is
present, no history expansion occurs.
Input lines containing history expansions are echoed after being expanded, but before any other
expansions take place and before the command is executed. It is this expanded form that is
recorded as the history event for later references.
By default, a history reference with no event designator refers to the same event as any preceding
history reference on that command line; if it is the only history reference in a command, it refers
to the previous command. However, if the option CSH_JUNKIE_HISTORY is set, then every history
reference with no event specication always refers to the previous command.
For example, ! is the event designator for the previous command, so !!:1 always refers to
the rst word of the previous command, and !!$ always refers to the last word of the previous
command. With CSH_JUNKIE_HISTORY set, then !:1 and !$ function in the same manner as
!!:1 and !!$, respectively. Conversely, if CSH_JUNKIE_HISTORY is unset, then !:1 and !$
refer to the rst and last words, respectively, of the same event referenced by the nearest other
history reference preceding them on the current command line, or to the previous command if
there is no preceding reference.
Chapter 14: Expansion 39
The character sequence ^foo^bar (where ^ is actually the second character of the histchars
parameter) repeats the last command, replacing the string foo with bar. More precisely,
the sequence ^foo^bar^ is synonymous with !!:s^foo^bar^, hence other modiers (see
Section 14.1.4 [Modiers], page 40) may follow the nal ^. In particular, ^foo^bar^:G per-
forms a global substitution.
If the shell encounters the character sequence !" in the input, the history mechanism is tem-
porarily disabled until the current list (see Chapter 6 [Shell Grammar], page 9) is fully parsed.
The !" is removed from the input, and any subsequent ! characters have no special signi-
cance.
A less convenient but more comprehensible form of command history support is provided by the
fc builtin.
14.1.2 Event Designators
An event designator is a reference to a command-line entry in the history list. In the list below,
remember that the initial ! in each item may be changed to another character by setting the
histchars parameter.
! Start a history expansion, except when followed by a blank, newline, = or (.
If followed immediately by a word designator (Section 14.1.3 [Word Designators],
page 39), this forms a history reference with no event designator (Section 14.1.1
[Overview], page 38).
!! Refer to the previous command. By itself, this expansion repeats the previous
command.
!n Refer to command-line n.
!-n Refer to the current command-line minus n.
!str Refer to the most recent command starting with str.
!?str[?] Refer to the most recent command containing str. The trailing ? is necessary if
this reference is to be followed by a modier or followed by any text that is not to
be considered part of str.
!# Refer to the current command line typed in so far. The line is treated as if it were
complete up to and including the word before the one with the !# reference.
!{...} Insulate a history reference from adjacent characters (if necessary).
14.1.3 Word Designators
A word designator indicates which word or words of a given command line are to be included in
a history reference. A : usually separates the event specication from the word designator. It
may be omitted only if the word designator begins with a ^, $, *, - or %. Word designators
include:
0 The rst input word (command).
n The nth argument.
^ The rst argument. That is, 1.
$ The last argument.
% The word matched by (the most recent) ?str search.
x-y A range of words; x defaults to 0.
* All the arguments, or a null value if there are none.
Chapter 14: Expansion 40
x* Abbreviates x-$.
x- Like x* but omitting word $.
Note that a % word designator works only when used in one of !%, !:% or !?str?:%, and
only when used after a !? expansion (possibly in an earlier command). Anything else results in
an error, although the error may not be the most obvious one.
14.1.4 Modiers
After the optional word designator, you can add a sequence of one or more of the following
modiers, each preceded by a :. These modiers also work on the result of lename generation
and parameter expansion, except where noted.
a Turn a le name into an absolute path: prepends the current directory, if necessary,
and resolves any use of .. and . in the path. Note that the transformation takes
place even if the le or any intervening directories do not exist.
A As a, but also resolve use of symbolic links where possible. Note that resolution
of .. occurs before resolution of symbolic links. This call is equivalent to a unless
your system has the realpath system call (modern systems do).
c Resolve a command name into an absolute path by searching the command path
given by the PATH variable. This does not work for commands containing directory
parts. Note also that this does not usually work as a glob qualier unless a le of
the same name is found in the current directory.
e Remove all but the part of the lename extension following the .; see the denition
of the lename extension in the description of the r modier below. Note that
according to that denition the result will be empty if the string ends with a ..
h Remove a trailing pathname component, leaving the head. This works like
dirname.
l Convert the words to all lowercase.
p Print the new command but do not execute it. Only works with history expansion.
q Quote the substituted words, escaping further substitutions. Works with history
expansion and parameter expansion, though for parameters it is only useful if the
resulting text is to be re-evaluated such as by eval.
Q Remove one level of quotes from the substituted words.
r Remove a lename extension leaving the root name. Strings with no lename ex-
tension are not altered. A lename extension is a . followed by any number of
characters (including zero) that are neither . nor / and that continue to the end
of the string. For example, the extension of foo.orig.c is .c, and dir.c/foo
has no extension.
s/l/r[/] Substitute r for l as described below. The substitution is done only for the rst
string that matches l. For arrays and for lename generation, this applies to each
word of the expanded text. See below for further notes on substitutions.
The forms gs/l/r and s/l/r/:G perform global substitution, i.e. substitute every
occurrence of r for l. Note that the g or :G must appear in exactly the position
shown.
See further notes on this form of substitution below.
& Repeat the previous s substitution. Like s, may be preceded immediately by a g.
In parameter expansion the & must appear inside braces, and in lename generation
it must be quoted with a backslash.
Chapter 14: Expansion 41
t Remove all leading pathname components, leaving the tail. This works like
basename.
u Convert the words to all uppercase.
x Like q, but break into words at whitespace. Does not work with parameter expan-
sion.
The s/l/r/ substitution works as follows. By default the left-hand side of substitutions are not
patterns, but character strings. Any character can be used as the delimiter in place of /. A
backslash quotes the delimiter character. The character &, in the right-hand-side r, is replaced
by the text from the left-hand-side l. The & can be quoted with a backslash. A null l uses
the previous string either from the previous l or from the contextual scan string s from !?s.
You can omit the rightmost delimiter if a newline immediately follows r; the rightmost ? in a
context scan can similarly be omitted. Note the same record of the last l and r is maintained
across all forms of expansion.
Note that if a & is used within glob qualifers an extra backslash is needed as a & is a special
character in this case.
If the option HIST_SUBST_PATTERN is set, l is treated as a pattern of the usual form described in
Section 14.8 [Filename Generation], page 59. This can be used in all the places where modiers
are available; note, however, that in globbing qualiers parameter substitution has already taken
place, so parameters in the replacement string should be quoted to ensure they are replaced at
the correct time. Note also that complicated patterns used in globbing qualiers may need the
extended glob qualier notation (#q:s/.../.../) in order for the shell to recognize the expression
as a glob qualier. Further, note that bad patterns in the substitution are not subject to the
NO_BAD_PATTERN option so will cause an error.
When HIST_SUBST_PATTERN is set, l may start with a # to indicate that the pattern must match
at the start of the string to be substituted, and a % may appear at the start or after an # to
indicate that the pattern must match at the end of the string to be substituted. The % or # may
be quoted with two backslashes.
For example, the following piece of lename generation code with the EXTENDED_GLOB option:
print *.c(#q:s/#%(#b)s(*).c/S${match[1]}.C/)
takes the expansion of *.c and applies the glob qualiers in the (#q...) expression, which consists
of a substitution modier anchored to the start and end of each word (#%). This turns on
backreferences ((#b)), so that the parenthesised subexpression is available in the replacement
string as ${match[1]}. The replacement string is quoted so that the parameter is not substituted
before the start of lename generation.
The following f, F, w and W modiers work only with parameter expansion and lename gener-
ation. They are listed here to provide a single point of reference for all modiers.
f Repeats the immediately (without a colon) following modier until the resulting
word doesnt change any more.
F:expr: Like f, but repeats only n times if the expression expr evaluates to n. Any character
can be used instead of the :; if (, [, or { is used as the opening delimiter, the
closing delimiter should be ), ], or }, respectively.
w Makes the immediately following modier work on each word in the string.
W:sep: Like w but words are considered to be the parts of the string that are separated by
sep. Any character can be used instead of the :; opening parentheses are handled
specially, see above.
Chapter 14: Expansion 42
14.2 Process Substitution
Each part of a command argument that takes the form <(list), >(list) or =(list) is subject to
process substitution. The expression may be preceded or followed by other strings except that,
to prevent clashes with commonly occurring strings and patterns, the last form must occur at
the start of a command argument, and the forms are only expanded when rst parsing command
or assignment arguments. Process substitutions may be used following redirection operators; in
this case, the substitution must appear with no trailing string.
In the case of the < or > forms, the shell runs the commands in list as a subprocess of the job
executing the shell command line. If the system supports the /dev/fd mechanism, the command
argument is the name of the device le corresponding to a le descriptor; otherwise, if the system
supports named pipes (FIFOs), the command argument will be a named pipe. If the form with
> is selected then writing on this special le will provide input for list. If < is used, then the le
passed as an argument will be connected to the output of the list process. For example,
paste <(cut -f1 file1) <(cut -f3 file2) |
tee >(process1) >(process2) >/dev/null
cuts elds 1 and 3 from the les le1 and le2 respectively, pastes the results together, and
sends it to the processes process1 and process2.
If =(...) is used instead of <(...), then the le passed as an argument will be the name of a
temporary le containing the output of the list process. This may be used instead of the < form
for a program that expects to lseek (see man page lseek(2)) on the input le.
There is an optimisation for substitutions of the form =(<<<arg), where arg is a single-word
argument to the here-string redirection <<<. This form produces a le name containing the value
of arg after any substitutions have been performed. This is handled entirely within the current
shell. This is eectively the reverse of the special form $(<arg) which treats arg as a le name
and replaces it with the les contents.
The = form is useful as both the /dev/fd and the named pipe implementation of <(...) have
drawbacks. In the former case, some programmes may automatically close the le descriptor
in question before examining the le on the command line, particularly if this is necessary
for security reasons such as when the programme is running setuid. In the second case, if
the programme does not actually open the le, the subshell attempting to read from or write
to the pipe will (in a typical implementation, dierent operating systems may have dierent
behaviour) block for ever and have to be killed explicitly. In both cases, the shell actually
supplies the information using a pipe, so that programmes that expect to lseek (see man page
lseek(2)) on the le will not work.
Also note that the previous example can be more compactly and eciently written (provided
the MULTIOS option is set) as:
paste <(cut -f1 file1) <(cut -f3 file2) > >(process1) > >(process2)
The shell uses pipes instead of FIFOs to implement the latter two process substitutions in the
above example.
There is an additional problem with >(process); when this is attached to an external command,
the parent shell does not wait for process to nish and hence an immediately following command
cannot rely on the results being complete. The problem and solution are the same as described
in the section MULTIOS in Chapter 7 [Redirection], page 16. Hence in a simplied version of
the example above:
paste <(cut -f1 file1) <(cut -f3 file2) > >(process)
(note that no MULTIOS are involved), process will be run asynchronously as far as the parent
shell is concerned. The workaround is:
{ paste <(cut -f1 file1) <(cut -f3 file2) } > >(process)
Chapter 14: Expansion 43
The extra processes here are spawned from the parent shell which will wait for their completion.
Another problem arises any time a job with a substitution that requires a temporary le is
disowned by the shell, including the case where &! or &| appears at the end of a command
containing a subsitution. In that case the temporary le will not be cleaned up as the shell no
longer has any memory of the job. A workaround is to use a subshell, for example,
(mycmd =(myoutput)) &!
as the forked subshell will wait for the command to nish then remove the temporary le.
A general workaround to ensure a process substitution endures for an appropriate length of time
is to pass it as a parameter to an anonymous shell function (a piece of shell code that is run
immediately with function scope). For example, this code:
() {
print File $1:
cat $1
} =(print This be the verse)
outputs something resembling the following
File /tmp/zsh6nU0kS:
This be the verse
The temporary le created by the process substitution will be deleted when the function exits.
14.3 Parameter Expansion
The character $ is used to introduce parameter expansions. See Chapter 15 [Parameters],
page 70 for a description of parameters, including arrays, associative arrays, and subscript
notation to access individual array elements.
Note in particular the fact that words of unquoted parameters are not automatically split on
whitespace unless the option SH_WORD_SPLIT is set; see references to this option below for more
details. This is an important dierence from other shells.
In the expansions discussed below that require a pattern, the form of the pattern is the same
as that used for lename generation; see Section 14.8 [Filename Generation], page 59. Note
that these patterns, along with the replacement text of any substitutions, are themselves sub-
ject to parameter expansion, command substitution, and arithmetic expansion. In addition to
the following operations, the colon modiers described in Section 14.1.4 [Modiers], page 40
in Section 14.1 [History Expansion], page 38 can be applied: for example, ${i:s/foo/bar/}
performs string substitution on the expansion of parameter $i.
${name} The value, if any, of the parameter name is substituted. The braces are required
if the expansion is to be followed by a letter, digit, or underscore that is not to be
interpreted as part of name. In addition, more complicated forms of substitution
usually require the braces to be present; exceptions, which only apply if the option
KSH_ARRAYS is not set, are a single subscript or any colon modiers appearing after
the name, or any of the characters ^, =, ~, # or + appearing before the name,
all of which work with or without braces.
If name is an array parameter, and the KSH_ARRAYS option is not set, then the
value of each element of name is substituted, one element per word. Otherwise, the
expansion results in one word only; with KSH_ARRAYS, this is the rst element of an
array. No eld splitting is done on the result unless the SH_WORD_SPLIT option is
set. See also the ags = and s:string:.
${+name} If name is the name of a set parameter 1 is substituted, otherwise 0 is substituted.
Chapter 14: Expansion 44
${name-word}
${name:-word}
If name is set, or in the second form is non-null, then substitute its value; otherwise
substitute word. In the second form name may be omitted, in which case word is
always substituted.
${name+word}
${name:+word}
If name is set, or in the second form is non-null, then substitute word; otherwise
substitute nothing.
${name=word}
${name:=word}
${name::=word}
In the rst form, if name is unset then set it to word; in the second form, if name
is unset or null then set it to word; and in the third form, unconditionally set name
to word. In all forms, the value of the parameter is then substituted.
${name?word}
${name:?word}
In the rst form, if name is set, or in the second form if name is both set and
non-null, then substitute its value; otherwise, print word and exit from the shell.
Interactive shells instead return to the prompt. If word is omitted, then a standard
message is printed.
In any of the above expressions that test a variable and substitute an alternate word, note that
you can use standard shell quoting in the word value to selectively override the splitting done
by the SH_WORD_SPLIT option and the = ag, but not splitting by the s:string: ag.
In the following expressions, when name is an array and the substitution is not quoted, or if the
(@) ag or the name[@] syntax is used, matching and replacement is performed on each array
element separately.
${name#pattern}
${name##pattern}
If the pattern matches the beginning of the value of name, then substitute the value
of name with the matched portion deleted; otherwise, just substitute the value of
name. In the rst form, the smallest matching pattern is preferred; in the second
form, the largest matching pattern is preferred.
${name%pattern}
${name%%pattern}
If the pattern matches the end of the value of name, then substitute the value
of name with the matched portion deleted; otherwise, just substitute the value of
name. In the rst form, the smallest matching pattern is preferred; in the second
form, the largest matching pattern is preferred.
${name:#pattern}
If the pattern matches the value of name, then substitute the empty string; oth-
erwise, just substitute the value of name. If name is an array the matching array
elements are removed (use the (M) ag to remove the non-matched elements).
${name:|arrayname}
If arrayname is the name (N.B., not contents) of an array variable, then any ele-
ments contained in arrayname are removed from the substitution of name. If the
substitution is scalar, either because name is a scalar variable or the expression is
quoted, the elements of arrayname are instead tested against the entire expression.
Chapter 14: Expansion 45
${name:*arrayname}
Similar to the preceding subsitution, but in the opposite sense, so that entries present
in both the original substitution and as elements of arrayname are retained and
others removed.
${name:^arrayname}
${name:^^arrayname}
Zips two arrays, such that the output array is twice as long as the shortest (longest
for :^^) of name and arrayname, with the elements alternatingly being picked from
them. For :^, if one of the input arrays is longer, the output will stop when the
end of the shorter array is reached. Thus,
a=(1 2 3 4); b=(a b); print ${a:^b}
will output 1 a 2 b. For :^^, then the input is repeated until all of the longer
array has been used up and the above will output 1 a 2 b 3 a 4 b.
Either or both inputs may be a scalar, they will be treated as an array of length
1 with the scalar as the only element. If either array is empty, the other array is
output with no extra elements inserted.
Currently the following code will output a b and 1 as two separate elements,
which can be unexpected. The second print provides a workaround which should
continue to work if this is changed.
a=(a b); b=(1 2); print -l "${a:^b}"; print -l "${${a:^b}}"
${name:oset}
${name:oset:length}
This syntax gives eects similar to parameter subscripting in the form
$name[start,end], but is compatible with other shells; note that both oset and
length are interpreted dierently from the components of a subscript.
If oset is non-negative, then if the variable name is a scalar substitute the contents
starting oset characters from the rst character of the string, and if name is an
array substitute elements starting oset elements from the rst element. If length
is given, substitute that many characters or elements, otherwise the entire rest of
the scalar or array.
A positive oset is always treated as the oset of a character or element in name
from the rst character or element of the array (this is dierent from native zsh
subscript notation). Hence 0 refers to the rst character or element regardless of
the setting of the option KSH_ARRAYS.
A negative oset counts backwards from the end of the scalar or array, so that -1
corresponds to the last character or element, and so on.
When positive, length counts from the oset position toward the end of the scalar or
array. When negative, length counts back from the end. If this results in a position
smaller than oset, a diagnostic is printed and nothing is substituted.
The option MULTIBYTE is obeyed, i.e. the oset and length count multibyte charac-
ters where appropriate.
oset and length undergo the same set of shell substitutions as for scalar assignment;
in addition, they are then subject to arithmetic evaluation. Hence, for example
print ${foo:3}
print ${foo: 1 + 2}
print ${foo:$(( 1 + 2))}
print ${foo:$(echo 1 + 2)}
all have the same eect, extracting the string starting at the fourth character of $foo
if the substution would otherwise return a scalar, or the array starting at the fourth
Chapter 14: Expansion 46
element if $foo would return an array. Note that with the option KSH_ARRAYS $foo
always returns a scalar (regardless of the use of the oset syntax) and a form such
as $foo[*]:3 is required to extract elements of an array named foo.
If oset is negative, the - may not appear immediately after the : as this indicates
the ${name:-word} form of substitution. Instead, a space may be inserted before
the -. Furthermore, neither oset nor length may begin with an alphabetic character
or & as these are used to indicate history-style modiers. To substitute a value from
a variable, the recommended approach is to precede it with a $ as this signies
the intention (parameter substitution can easily be rendered unreadable); however,
as arithmetic substitution is performed, the expression ${var: offs} does work,
retrieving the oset from $offs.
For further compatibility with other shells there is a special case for array oset 0.
This usually accesses to the rst element of the array. However, if the substitution
refers the positional parameter array, e.g. $@ or $*, then oset 0 instead refers
to $0, oset 1 refers to $1, and so on. In other words, the positional parameter
array is eectively extended by prepending $0. Hence ${*:0:1} substitutes $0 and
${*:1:1} substitutes $1.
${name/pattern/repl}
${name//pattern/repl}
Replace the longest possible match of pattern in the expansion of parameter name
by string repl. The rst form replaces just the rst occurrence, the second form
all occurrences. Both pattern and repl are subject to double-quoted substitution,
so that expressions like ${name/$opat/$npat} will work, but note the usual rule
that pattern characters in $opat are not treated specially unless either the option
GLOB_SUBST is set, or $opat is instead substituted as ${~opat}.
The pattern may begin with a #, in which case the pattern must match at the
start of the string, or %, in which case it must match at the end of the string, or
#% in which case the pattern must match the entire string. The repl may be an
empty string, in which case the nal / may also be omitted. To quote the nal /
in other cases it should be preceded by a single backslash; this is not necessary if
the / occurs inside a substituted parameter. Note also that the #, % and #% are
not active if they occur inside a substituted parameter, even at the start.
The rst / may be preceded by a :, in which case the match will only succeed if
it matches the entire word. Note also the eect of the I and S parameter expansion
ags below; however, the ags M, R, B, E and N are not useful.
For example,
foo="twinkle twinkle little star" sub="t*e" rep="spy"
print ${foo//${~sub}/$rep}
print ${(S)foo//${~sub}/$rep}
Here, the ~ ensures that the text of $sub is treated as a pattern rather than a plain
string. In the rst case, the longest match for t*e is substituted and the result is
spy star, while in the second case, the shortest matches are taken and the result
is spy spy lispy star.
${#spec} If spec is one of the above substitutions, substitute the length in characters of the
result instead of the result itself. If spec is an array expression, substitute the
number of elements of the result. This has the side-eect that joining is skipped
even in quoted forms, which may aect other sub-expressions in spec. Note that ^,
=, and ~, below, must appear to the left of # when these forms are combined.
${^spec} Turn on the RC_EXPAND_PARAM option for the evaluation of spec; if the ^ is doubled,
turn it o. When this option is set, array expansions of the form foo${xx}bar, where
Chapter 14: Expansion 47
the parameter xx is set to (a b c), are substituted with fooabar foobbar foocbar
instead of the default fooa b cbar. Note that an empty array will therefore cause
all arguments to be removed.
Internally, each such expansion is converted into the equivalent list for brace expan-
sion. E.g., ${^var} becomes {$var[1],$var[2],...}, and is processed as described
in Section 14.6 [Brace Expansion], page 56 below. If word splitting is also in eect
the $var[N] may themselves be split into dierent list elements.
${=spec} Perform word splitting using the rules for SH_WORD_SPLIT during the evaluation of
spec, but regardless of whether the parameter appears in double quotes; if the =
is doubled, turn it o. This forces parameter expansions to be split into separate
words before substitution, using IFS as a delimiter. This is done by default in most
other shells.
Note that splitting is applied to word in the assignment forms of spec before the
assignment to name is performed. This aects the result of array assignments with
the A ag.
${~spec} Turn on the GLOB_SUBST option for the evaluation of spec; if the ~ is doubled,
turn it o. When this option is set, the string resulting from the expansion will be
interpreted as a pattern anywhere that is possible, such as in lename expansion
and lename generation and pattern-matching contexts like the right hand side of
the = and != operators in conditions.
In nested substitutions, note that the eect of the ~ applies to the result of the
current level of substitution. A surrounding pattern operation on the result may
cancel it. Hence, for example, if the parameter foo is set to *, ${~foo//\*/*.c}
is substituted by the pattern *.c, which may be expanded by lename generation,
but ${${~foo}//\*/*.c} substitutes to the string *.c, which will not be further
expanded.
If a ${...} type parameter expression or a $(...) type command substitution is used in place of
name above, it is expanded rst and the result is used as if it were the value of name. Thus it
is possible to perform nested operations: ${${foo#head}%tail} substitutes the value of $foo
with both head and tail deleted. The form with $(...) is often useful in combination with
the ags described next; see the examples below. Each name or nested ${...} in a parameter
expansion may also be followed by a subscript expression as described in Section 15.2 [Array
Parameters], page 70.
Note that double quotes may appear around nested expressions, in which case only the part
inside is treated as quoted; for example, ${(f)"$(foo)"} quotes the result of $(foo), but the
ag (f) (see below) is applied using the rules for unquoted expansions. Note further that
quotes are themselves nested in this context; for example, in "${(@f)"$(foo)"}", there are two
sets of quotes, one surrounding the whole expression, the other (redundant) surrounding the
$(foo) as before.
14.3.1 Parameter Expansion Flags
If the opening brace is directly followed by an opening parenthesis, the string up to the matching
closing parenthesis will be taken as a list of ags. In cases where repeating a ag is meaningful,
the repetitions need not be consecutive; for example, (q%q%q) means the same thing as the
more readable (%%qqq). The following ags are supported:
# Evaluate the resulting words as numeric expressions and output the characters cor-
responding to the resulting integer. Note that this form is entirely distinct from use
of the # without parentheses.
If the MULTIBYTE option is set and the number is greater than 127 (i.e. not an ASCII
character) it is treated as a Unicode character.
Chapter 14: Expansion 48
% Expand all % escapes in the resulting words in the same way as in prompts
(see Chapter 13 [Prompt Expansion], page 33). If this ag is given twice, full
prompt expansion is done on the resulting words, depending on the setting of the
PROMPT_PERCENT, PROMPT_SUBST and PROMPT_BANG options.
@ In double quotes, array elements are put into separate words. E.g., "${(@)foo}"
is equivalent to "${foo[@]}" and "${(@)foo[1,2]}" is the same as "$foo[1]"
"$foo[2]". This is distinct from eld splitting by the f, s or z ags, which still
applies within each array element.
A Create an array parameter with ${...=...}, ${...:=...} or ${...::=...}. If this ag
is repeated (as in AA), create an associative array parameter. Assignment is made
before sorting or padding; if eld splitting is active, the word part is split before
assignment. The name part may be a subscripted range for ordinary arrays; the
word part must be converted to an array, for example by using ${(AA)=name=...}
to activate eld splitting, when creating an associative array.
a Sort in array index order; when combined with O sort in reverse array index order.
Note that a is therefore equivalent to the default but Oa is useful for obtaining
an arrays elements in reverse order.
c With ${#name}, count the total number of characters in an array, as if the elements
were concatenated with spaces between them. This is not a true join of the array,
so other expressions used with this ag may have an eect on the elements of the
array before it is counted.
C Capitalize the resulting words. Words in this case refers to sequences of alphanu-
meric characters separated by non-alphanumerics, not to words that result from
eld splitting.
D Assume the string or array elements contain directories and attempt to substitute
the leading part of these by names. The remainder of the path (the whole of it if
the leading part was not subsituted) is then quoted so that the whole string can be
used as a shell argument. This is the reverse of ~ substitution: see Section 14.7
[Filename Expansion], page 57.
e Perform parameter expansion, command substitution and arithmetic expansion on
the result. Such expansions can be nested but too deep recursion may have unpre-
dictable eects.
f Split the result of the expansion at newlines. This is a shorthand for ps:\n:.
F Join the words of arrays together using newline as a separator. This is a shorthand
for pj:\n:.
g:opts: Process escape sequences like the echo builtin when no options are given (g::).
With the o option, octal escapes dont take a leading zero. With the c option,
sequences like ^X are also processed. With the e option, processes \M-t and
similar sequences like the print builtin. With both of the o and e options, behaves
like the print builtin except that in none of these modes is \c interpreted.
i Sort case-insensitively. May be combined with n or O.
k If name refers to an associative array, substitute the keys (element names) rather
than the values of the elements. Used with subscripts (including ordinary arrays),
force indices or keys to be substituted even if the subscript form refers to values.
However, this ag may not be combined with subscript ranges.
L Convert all letters in the result to lower case.
Chapter 14: Expansion 49
n Sort decimal integers numerically; if the rst diering characters of two test strings
are not digits, sorting is lexical. Integers with more initial zeroes are sorted before
those with fewer or none. Hence the array foo1 foo02 foo2 foo3 foo20 foo23
is sorted into the order shown. May be combined with i or O.
o Sort the resulting words in ascending order; if this appears on its own the sorting
is lexical and case-sensitive (unless the locale renders it case-insensitive). Sorting
in ascending order is the default for other forms of sorting, so this is ignored if
combined with a, i or n.
O Sort the resulting words in descending order; O without a, i or n sorts in reverse
lexical order. May be combined with a, i or n to reverse the order of sorting.
P This forces the value of the parameter name to be interpreted as a further parameter
name, whose value will be used where appropriate. Note that ags set with one of
the typeset family of commands (in particular case transformations) are not applied
to the value of name used in this fashion.
If used with a nested parameter or command substitution, the result of that will be
taken as a parameter name in the same way. For example, if you have foo=bar
and bar=baz, the strings ${(P)foo}, ${(P)${foo}}, and ${(P)$(echo bar)} will
be expanded to baz.
q Quote characters that are special to the shell in the resulting words with backslashes;
unprintable or invalid characters are quoted using the $\NNN form, with separate
quotes for each octet.
If this ag is given twice, the resulting words are quoted in single quotes and if it is
given three times, the words are quoted in double quotes; in these forms no special
handling of unprintable or invalid characters is attempted. If the ag is given four
times, the words are quoted in single quotes preceded by a $. Note that in all three
of these forms quoting is done unconditionally, even if this does not change the way
the resulting string would be interpreted by the shell.
If a q- is given (only a single q may appear), a minimal form of single quoting is
used that only quotes the string if needed to protect special characters. Typically
this form gives the most readable output.
Q Remove one level of quotes from the resulting words.
t Use a string describing the type of the parameter where the value of the parameter
would usually appear. This string consists of keywords separated by hyphens (-).
The rst keyword in the string describes the main type, it can be one of scalar,
array, integer, float or association. The other keywords describe the type
in more detail:
local for local parameters
left for left justied parameters
right_blanks
for right justied parameters with leading blanks
right_zeros
for right justied parameters with leading zeros
lower for parameters whose value is converted to all lower case when it is
expanded
upper for parameters whose value is converted to all upper case when it is
expanded
Chapter 14: Expansion 50
readonly for readonly parameters
tag for tagged parameters
export for exported parameters
unique for arrays which keep only the rst occurrence of duplicated values
hide for parameters with the hide ag
special for special parameters dened by the shell
u Expand only the rst occurrence of each unique word.
U Convert all letters in the result to upper case.
v Used with k, substitute (as two consecutive words) both the key and the value of
each associative array element. Used with subscripts, force values to be substituted
even if the subscript form refers to indices or keys.
V Make any special characters in the resulting words visible.
w With ${#name}, count words in arrays or strings; the s ag may be used to set a
word delimiter.
W Similar to w with the dierence that empty words between repeated delimiters are
also counted.
X With this ag, parsing errors occurring with the Q, e and # ags or the pattern
matching forms such as ${name#pattern} are reported. Without the ag, errors
are silently ignored.
z Split the result of the expansion into words using shell parsing to nd the words, i.e.
taking into account any quoting in the value. Comments are not treated specially
but as ordinary strings, similar to interactive shells with the INTERACTIVE_COMMENTS
option unset (however, see the Z ag below for related options)
Note that this is done very late, even later than the (s) ag. So to access single
words in the result use nested expansions as in ${${(z)foo}[2]}. Likewise, to
remove the quotes in the resulting words use ${(Q)${(z)foo}}.
0 Split the result of the expansion on null bytes. This is a shorthand for ps:\0:.
The following ags (except p) are followed by one or more arguments as shown. Any character,
or the matching pairs (...), {...}, [...], or <...>, may be used in place of a colon as delimiters,
but note that when a ag takes more than one argument, a matched pair of delimiters must
surround each argument.
p Recognize the same escape sequences as the print builtin in string arguments to
any of the ags described below that follow this argument.
~ Force string arguments to any of the ags below that follow within the parentheses
to be treated as patterns. Compare with a ~ outside parentheses, which forces the
entire substituted string to be treated as a pattern. Hence, for example,
[[ "?" = ${(~j.|.)array} ]]
with the EXTENDED_GLOB option set succeeds if and only if $array contains the string
? as an element. The argument may be repeated to toggle the behaviour; its eect
only lasts to the end of the parenthesised group.
j:string: Join the words of arrays together using string as a separator. Note that this occurs
before eld splitting by the s:string: ag or the SH_WORD_SPLIT option.
Chapter 14: Expansion 51
l:expr::string1::string2:
Pad the resulting words on the left. Each word will be truncated if required and
placed in a eld expr characters wide.
The arguments :string1: and :string2: are optional; neither, the rst, or both may
be given. Note that the same pairs of delimiters must be used for each of the three
arguments. The space to the left will be lled with string1 (concatenated as often
as needed) or spaces if string1 is not given. If both string1 and string2 are given,
string2 is inserted once directly to the left of each word, truncated if necessary,
before string1 is used to produce any remaining padding.
If the MULTIBYTE option is in eect, the ag m may also be given, in which case
widths will be used for the calculation of padding; otherwise individual multibyte
characters are treated as occupying one unit of width.
If the MULTIBYTE option is not in eect, each byte in the string is treated as occupying
one unit of width.
Control characters are always assumed to be one unit wide; this allows the mecha-
nism to be used for generating repetitions of control characters.
m Only useful together with one of the ags l or r or with the # length operator when
the MULTIBYTE option is in eect. Use the character width reported by the system
in calculating how much of the string it occupies or the overall length of the string.
Most printable characters have a width of one unit, however certain Asian character
sets and certain special eects use wider characters; combining characters have zero
width. Non-printable characters are arbitrarily counted as zero width; how they
would actually be displayed will vary.
If the m is repeated, the character either counts zero (if it has zero width), else
one. For printable character strings this has the eect of counting the number of
glyphs (visibly separate characters), except for the case where combining characters
themselves have non-zero width (true in certain alphabets).
r:expr::string1::string2:
As l, but pad the words on the right and insert string2 immediately to the right of
the string to be padded.
Left and right padding may be used together. In this case the strategy is to apply
left padding to the rst half width of each of the resulting words, and right padding
to the second half. If the string to be padded has odd width the extra padding is
applied on the left.
s:string: Force eld splitting at the separator string. Note that a string of two or more
characters means that all of them must match in sequence; this diers from the
treatment of two or more characters in the IFS parameter. See also the = ag and
the SH_WORD_SPLIT option. An empty string may also be given in which case every
character will be a separate element.
For historical reasons, the usual behaviour that empty array elements are retained
inside double quotes is disabled for arrays generated by splitting; hence the following:
line="one::three"
print -l "${(s.:.)line}"
produces two lines of output for one and three and elides the empty eld. To
override this behaviour, supply the "(@)" ag as well, i.e. "${(@s.:.)line}".
Z:opts: As z but takes a combination of option letters between a following pair of delimiter
characters. With no options the eect is identical to z. (Z+c+) causes comments
to be parsed as a string and retained; any eld in the resulting array beginning
Chapter 14: Expansion 52
with an unquoted comment character is a comment. (Z+C+) causes comments to be
parsed and removed. The rule for comments is standard: anything between a word
starting with the third character of $HISTCHARS, default #, up to the next newline is
a comment. (Z+n+) causes unquoted newlines to be treated as ordinary whitespace,
else they are treated as if they are shell code delimiters and converted to semicolons.
Options are combined within the same set of delimiters, e.g. (Z+Cn+).
_:ags: The underscore (_) ag is reserved for future use. As of this revision of zsh, there
are no valid ags; anything following an underscore, other than an empty pair of
delimiters, is treated as an error, and the ag itself has no eect.
The following ags are meaningful with the ${...#...} or ${...%...} forms. The S and I ags may
also be used with the ${.../...} forms.
S Search substrings as well as beginnings or ends; with # start from the beginning and
with % start from the end of the string. With substitution via ${.../...} or ${...//...},
species non-greedy matching, i.e. that the shortest instead of the longest match
should be replaced.
I:expr: Search the exprth match (where expr evaluates to a number). This only applies
when searching for substrings, either with the S ag, or with ${.../...} (only the
exprth match is substituted) or ${...//...} (all matches from the exprth on are
substituted). The default is to take the rst match.
The exprth match is counted such that there is either one or zero matches from each
starting position in the string, although for global substitution matches overlapping
previous replacements are ignored. With the ${...%...} and ${...%%...} forms, the
starting position for the match moves backwards from the end as the index increases,
while with the other forms it moves forward from the start.
Hence with the string
which switch is the right switch for Ipswich?
substitutions of the form ${(SI:N:)string#w*ch} as N increases from 1 will match
and remove which, witch, witch and wich; the form using ## will match
and remove which switch is the right switch for Ipswich, witch is the
right switch for Ipswich, witch for Ipswich and wich. The form using %
will remove the same matches as for #, but in reverse order, and the form using
%% will remove the same matches as for ## in reverse order.
B Include the index of the beginning of the match in the result.
E Include the index of the end of the match in the result.
M Include the matched portion in the result.
N Include the length of the match in the result.
R Include the unmatched portion in the result (the Rest).
14.3.2 Rules
Here is a summary of the rules for substitution; this assumes that braces are present around
the substitution, i.e. ${...}. Some particular examples are given below. Note that the Zsh
Development Group accepts no responsibility for any brain damage which may occur during the
reading of the following rules.
1. Nested substitution
If multiple nested ${...} forms are present, substitution is performed from the
inside outwards. At each level, the substitution takes account of whether the current
Chapter 14: Expansion 53
value is a scalar or an array, whether the whole substitution is in double quotes,
and what ags are supplied to the current level of substitution, just as if the nested
substitution were the outermost. The ags are not propagated up to enclosing
substitutions; the nested substitution will return either a scalar or an array as
determined by the ags, possibly adjusted for quoting. All the following steps take
place where applicable at all levels of substitution. Note that, unless the (P) ag
is present, the ags and any subscripts apply directly to the value of the nested
substitution; for example, the expansion ${${foo}} behaves exactly the same as
${foo}.
At each nested level of substitution, the substituted words undergo all forms of
single-word substitution (i.e. not lename generation), including command substi-
tution, arithmetic expansion and lename expansion (i.e. leading ~ and =). Thus,
for example, ${${:-=cat}:h} expands to the directory where the cat program re-
sides. (Explanation: the internal substitution has no parameter but a default value
=cat, which is expanded by lename expansion to a full path; the outer substitution
then applies the modier :h and takes the directory part of the path.)
2. Internal parameter ags
Any parameter ags set by one of the typeset family of commands, in particular
the L, R, Z, u and l ags for padding and capitalization, are applied directly to the
parameter value. Note these ags are options to the command, e.g. typeset -Z;
they are not the same as the ags used within parameter substitutions.
3. Parameter subscripting
If the value is a raw parameter reference with a subscript, such as ${var[3]}, the
eect of subscripting is applied directly to the parameter. Subscripts are evaluated
left to right; subsequent subscripts apply to the scalar or array value yielded by the
previous subscript. Thus if var is an array, ${var[1][2]} is the second character of
the rst word, but ${var[2,4][2]} is the entire third word (the second word of the
range of words two through four of the original array). Any number of subscripts
may appear. Flags such as (k) and (v) which alter the result of subscripting are
applied.
4. Parameter name replacement
The eect of any (P) ag, which treats the value so far as a parameter name and
replaces it with the corresponding value, is applied.
5. Double-quoted joining
If the value after this process is an array, and the substitution appears in double
quotes, and neither an (@) ag nor a # length operator is present at the current
level, then words of the value are joined with the rst character of the parameter
$IFS, by default a space, between each word (single word arrays are not modied).
If the (j) ag is present, that is used for joining instead of $IFS.
6. Nested subscripting
Any remaining subscripts (i.e. of a nested substitution) are evaluated at this point,
based on whether the value is an array or a scalar. As with 3., multiple subscripts
can appear. Note that ${foo[2,4][2]} is thus equivalent to ${${foo[2,4]}[2]}
and also to "${${(@)foo[2,4]}[2]}" (the nested substitution returns an array in
both cases), but not to "${${foo[2,4]}[2]}" (the nested substitution returns a
scalar because of the quotes).
7. Modiers
Any modiers, as specied by a trailing #, %, / (possibly doubled) or by a set of
modiers of the form :... (see Section 14.1.4 [Modiers], page 40 in Section 14.1
[History Expansion], page 38), are applied to the words of the value at this level.
Chapter 14: Expansion 54
8. Character evaluation
Any (#) ag is applied, evaluating the result so far numerically as a character.
9. Length Any initial # modier, i.e. in the form ${#var}, is used to evaluate the length of
the expression so far.
10. Forced joining
If the (j) ag is present, or no (j) ag is present but the string is to be split as
given by rule 11., and joining did not take place at step 5., any words in the value
are joined together using the given string or the rst character of $IFS if none. Note
that the (F) ag implicitly supplies a string for joining in this manner.
11. Simple word splitting
If one of the (s) or (f) ags are present, or the = specier was present (e.g.
${=var}), the word is split on occurrences of the specied string, or (for = with
neither of the two ags present) any of the characters in $IFS.
If no (s), (f) or = was given, but the word is not quoted and the option
SH_WORD_SPLIT is set, the word is split on occurrences of any of the characters in
$IFS. Note this step, too, takes place at all levels of a nested substitution.
12. Case modication
Any case modication from one of the ags (L), (U) or (C) is applied.
13. Escape sequence replacement
First any replacements from the (g) ag are performed, then any prompt-style
formatting from the (%) family of ags is applied.
14. Quote application
Any quoting or unquoting using (q) and (Q) and related ags is applied.
15. Directory naming
Any directory name substitution using (D) ag is applied.
16. Visibility enhancement
Any modications to make characters visible using the (V) ag are applied.
17. Lexical word splitting
If the (z) ag or one of the forms of the (Z) ag is present, the word is split as
if it were a shell command line, so that quotation marks and other metacharacters
are used to decide what constitutes a word. Note this form of splitting is entirely
distinct from that described by rule 11.: it does not use $IFS, and does not cause
forced joining.
18. Uniqueness
If the result is an array and the (u) ag was present, duplicate elements are
removed from the array.
19. Ordering
If the result is still an array and one of the (o) or (O) ags was present, the array
is reordered.
20. RC_EXPAND_PARAM
At this point the decision is made whether any resulting array elements are to
be combined element by element with surrounding text, as given by either the
RC_EXPAND_PARAM option or the ^ ag.
21. Re-evaluation
Any (e) ag is applied to the value, forcing it to be re-examined for new parameter
substitutions, but also for command and arithmetic substitutions.
Chapter 14: Expansion 55
22. Padding
Any padding of the value by the (l.ll.) or (r.ll.) ags is applied.
23. Semantic joining
In contexts where expansion semantics requires a single word to result, all words
are rejoined with the rst character of IFS between. So in ${(P)${(f)lines}}
the value of ${lines} is split at newlines, but then must be joined again before the
P ag can be applied.
If a single word is not required, this rule is skipped.
24. Empty argument removal
If the substitution does not appear in double quotes, any resulting zero-length ar-
gument, whether from a scalar or an element of an array, is elided from the list of
arguments inserted into the command line.
Strictly speaking, the removal happens later as the same happens with other forms
of substitution; the point to note here is simply that it occurs after any of the above
parameter operations.
14.3.3 Examples
The ag f is useful to split a double-quoted substitution line by line. For example,
${(f)"$(<le)"} substitutes the contents of le divided so that each line is an element of
the resulting array. Compare this with the eect of $(<le) alone, which divides the le up
by words, or the same inside double quotes, which makes the entire content of the le a single
string.
The following illustrates the rules for nested parameter expansions. Suppose that $foo contains
the array (bar baz):
"${(@)${foo}[1]}"
This produces the result b. First, the inner substitution "${foo}", which has no
array (@) ag, produces a single word result "bar baz". The outer substitution
"${(@)...[1]}" detects that this is a scalar, so that (despite the (@) ag) the
subscript picks the rst character.
"${${(@)foo}[1]}"
This produces the result bar. In this case, the inner substitution "${(@)foo}" pro-
duces the array (bar baz). The outer substitution "${...[1]}" detects that this
is an array and picks the rst word. This is similar to the simple case "${foo[1]}".
As an example of the rules for word splitting and joining, suppose $foo contains the array (ax1
bx1). Then
${(s/x/)foo}
produces the words a, 1 b and 1.
${(j/x/s/x/)foo}
produces a, 1, b and 1.
${(s/x/)foo%%1*}
produces a and b (note the extra space). As substitution occurs before either
joining or splitting, the operation rst generates the modied array (ax bx), which
is joined to give "ax bx", and then split to give a, b and . The nal empty
string will then be elided, as it is not in double quotes.
Chapter 14: Expansion 56
14.4 Command Substitution
A command enclosed in parentheses preceded by a dollar sign, like $(...), or quoted with grave
accents, like ..., is replaced with its standard output, with any trailing newlines deleted. If
the substitution is not enclosed in double quotes, the output is broken into words using the
IFS parameter. The substitution $(cat foo) may be replaced by the equivalent but faster
$(<foo). In either case, if the option GLOB_SUBST is set, the output is eligible for lename
generation.
14.5 Arithmetic Expansion
A string of the form $[exp] or $((exp)) is substituted with the value of the arithmetic
expression exp. exp is subjected to parameter expansion, command substitution and arithmetic
expansion before it is evaluated. See Chapter 11 [Arithmetic Evaluation], page 26.
14.6 Brace Expansion
A string of the form foo{xx,yy,zz}bar is expanded to the individual words fooxxbar, fooyy-
bar and foozzbar. Left-to-right order is preserved. This construct may be nested. Commas
may be quoted in order to include them literally in a word.
An expression of the form {n1..n2}, where n1 and n2 are integers, is expanded to every
number between n1 and n2 inclusive. If either number begins with a zero, all the resulting
numbers will be padded with leading zeroes to that minimum width, but for negative numbers
the - character is also included in the width. If the numbers are in decreasing order the resulting
sequence will also be in decreasing order.
An expression of the form {n1..n2..n3}, where n1, n2, and n3 are integers, is expanded as
above, but only every n3th number starting from n1 is output. If n3 is negative the numbers
are output in reverse order, this is slightly dierent from simply swapping n1 and n2 in the case
that the step n3 doesnt evenly divide the range. Zero padding can be specied in any of the
three numbers, specifying it in the third can be useful to pad for example {-99..100..01}
which is not possible to specify by putting a 0 on either of the rst two numbers (i.e. pad to
two characters).
An expression of the form {c1..c2}, where c1 and c2 are single characters (which may be
multibyte characters), is expanded to every character in the range from c1 to c2 in whatever
character sequence is used internally. For characters with code points below 128 this is US
ASCII (this is the only case most users will need). If any intervening character is not printable,
appropriate quotation is used to render it printable. If the character sequence is reversed, the
output is in reverse order, e.g. {d..a} is substituted as d c b a.
If a brace expression matches none of the above forms, it is left unchanged, unless the option
BRACE_CCL (an abbreviation for brace character class) is set. In that case, it is expanded to a
list of the individual characters between the braces sorted into the order of the characters in the
ASCII character set (multibyte characters are not currently handled). The syntax is similar to
a [...] expression in lename generation: - is treated specially to denote a range of characters,
but ^ or ! as the rst character is treated normally. For example, {abcdef0-9} expands to
16 words 0 1 2 3 4 5 6 7 8 9 a b c d e f.
Note that brace expansion is not part of lename generation (globbing); an expression such as
*/{foo,bar} is split into two separate words */foo and */bar before lename generation takes
place. In particular, note that this is liable to produce a no match error if either of the two
expressions does not match; this is to be contrasted with */(foo|bar), which is treated as a
single pattern but otherwise has similar eects.
To combine brace expansion with array expansion, see the ${^spec} form described in
Section 14.3 [Parameter Expansion], page 43 above.
Chapter 14: Expansion 57
14.7 Filename Expansion
Each word is checked to see if it begins with an unquoted ~. If it does, then the word up to
a /, or the end of the word if there is no /, is checked to see if it can be substituted in one
of the ways described here. If so, then the ~ and the checked portion are replaced with the
appropriate substitute value.
A ~ by itself is replaced by the value of $HOME. A ~ followed by a + or a - is replaced by
current or previous working directory, respectively.
A ~ followed by a number is replaced by the directory at that position in the directory stack.
~0 is equivalent to ~+, and ~1 is the top of the stack. ~+ followed by a number is replaced by
the directory at that position in the directory stack. ~+0 is equivalent to ~+, and ~+1 is the
top of the stack. ~- followed by a number is replaced by the directory that many positions from
the bottom of the stack. ~-0 is the bottom of the stack. The PUSHD_MINUS option exchanges
the eects of ~+ and ~- where they are followed by a number.
14.7.1 Dynamic named directories
If the function zsh_directory_name exists, or the shell variable
zsh_directory_name_functions exists and contains an array of function names,
then the functions are used to implement dynamic directory naming. The functions are tried
in order until one returns status zero, so it is important that functions test whether they can
handle the case in question and return an appropriate status.
A ~ followed by a string namstr in unquoted square brackets is treated specially as a dynamic
directory name. Note that the rst unquoted closing square bracket always terminates namstr.
The shell function is passed two arguments: the string n (for name) and namstr. It should either
set the array reply to a single element which is the directory corresponding to the name and
return status zero (executing an assignment as the last statement is usually sucient), or it
should return status non-zero. In the former case the element of reply is used as the directory;
in the latter case the substitution is deemed to have failed. If all functions fail and the option
NOMATCH is set, an error results.
The functions dened as above are also used to see if a directory can be turned into a name, for
example when printing the directory stack or when expanding %~ in prompts. In this case each
function is passed two arguments: the string d (for directory) and the candidate for dynamic
naming. The function should either return non-zero status, if the directory cannot be named by
the function, or it should set the array reply to consist of two elements: the rst is the dynamic
name for the directory (as would appear within ~[...]), and the second is the prex length of
the directory to be replaced. For example, if the trial directory is /home/myname/src/zsh and
the dynamic name for /home/myname/src (which has 16 characters) is s, then the function sets
reply=(s 16)
The directory name so returned is compared with possible static names for parts of the directory
path, as described below; it is used if the prex length matched (16 in the example) is longer
than that matched by any static name.
It is not a requirement that a function implements both n and d calls; for example, it might be
appropriate for certain dynamic forms of expansion not to be contracted to names. In that case
any call with the rst argument d should cause a non-zero status to be returned.
The completion system calls zsh_directory_name c followed by equivalent calls to elements
of the array zsh_directory_name_functions, if it exists, in order to complete dynamic names
for directories. The code for this should be as for any other completion function as described in
Chapter 20 [Completion System], page 191.
Chapter 14: Expansion 58
As a working example, here is a function that expands any dynamic names beginning with the
string p: to directories below /home/pws/perforce. In this simple case a static name for the
directory would be just as eective.
zsh_directory_name() {
emulate -L zsh
setopt extendedglob
local -a match mbegin mend
if [[ $1 = d ]]; then
# turn the directory into a name
if [[ $2 = (#b)(/home/pws/perforce/)([^/]##)* ]]; then
typeset -ga reply
reply=(p:$match[2] $(( ${#match[1]} + ${#match[2]} )) )
else
return 1
fi
elif [[ $1 = n ]]; then
# turn the name into a directory
[[ $2 != (#b)p:(?*) ]] && return 1
typeset -ga reply
reply=(/home/pws/perforce/$match[1])
elif [[ $1 = c ]]; then
# complete names
local expl
local -a dirs
dirs=(/home/pws/perforce/*(/:t))
dirs=(p:${^dirs})
_wanted dynamic-dirs expl dynamic directory compadd -S\] -a dirs
return
else
return 1
fi
return 0
}
14.7.2 Static named directories
A ~ followed by anything not already covered consisting of any number of alphanumeric char-
acters or underscore (_), hyphen (-), or dot (.) is looked up as a named directory, and
replaced by the value of that named directory if found. Named directories are typically home
directories for users on the system. They may also be dened if the text after the ~ is the
name of a string shell parameter whose value begins with a /. Note that trailing slashes will
be removed from the path to the directory (though the original parameter is not modied).
It is also possible to dene directory names using the -d option to the hash builtin.
When the shell prints a path (e.g. when expanding %~ in prompts or when printing the directory
stack), the path is checked to see if it has a named directory as its prex. If so, then the prex
portion is replaced with a ~ followed by the name of the directory. The shorter of the two ways
of referring to the directory is used, i.e. either the directory name or the full path; the name is
used if they are the same length. The parameters $PWD and $OLDPWD are never abbreviated in
this fashion.
Chapter 14: Expansion 59
14.7.3 = expansion
If a word begins with an unquoted = and the EQUALS option is set, the remainder of the word
is taken as the name of a command. If a command exists by that name, the word is replaced by
the full pathname of the command.
14.7.4 Notes
Filename expansion is performed on the right hand side of a parameter assignment, including
those appearing after commands of the typeset family. In this case, the right hand side will
be treated as a colon-separated list in the manner of the PATH parameter, so that a ~ or an =
following a : is eligible for expansion. All such behaviour can be disabled by quoting the ~,
the =, or the whole expression (but not simply the colon); the EQUALS option is also respected.
If the option MAGIC_EQUAL_SUBST is set, any unquoted shell argument in the form identi-
er=expression becomes eligible for le expansion as described in the previous paragraph. Quot-
ing the rst = also inhibits this.
14.8 Filename Generation
If a word contains an unquoted instance of one of the characters *, (, |, <, [, or ?,
it is regarded as a pattern for lename generation, unless the GLOB option is unset. If the
EXTENDED_GLOB option is set, the ^ and # characters also denote a pattern; otherwise they
are not treated specially by the shell.
The word is replaced with a list of sorted lenames that match the pattern. If no matching
pattern is found, the shell gives an error message, unless the NULL_GLOB option is set, in which
case the word is deleted; or unless the NOMATCH option is unset, in which case the word is left
unchanged.
In lename generation, the character / must be matched explicitly; also, a . must be matched
explicitly at the beginning of a pattern or after a /, unless the GLOB_DOTS option is set. No
lename generation pattern matches the les . or ... In other instances of pattern matching,
the / and . are not treated specially.
14.8.1 Glob Operators
* Matches any string, including the null string.
? Matches any character.
[...] Matches any of the enclosed characters. Ranges of characters can be specied by
separating two characters by a -. A - or ] may be matched by including it as the
rst character in the list. There are also several named classes of characters, in the
form [:name:] with the following meanings. The rst set use the macros provided
by the operating system to test for the given character combinations, including any
modications due to local language settings, see man page ctype(3):
[:alnum:]
The character is alphanumeric
[:alpha:]
The character is alphabetic
[:ascii:]
The character is 7-bit, i.e. is a single-byte character without the top bit
set.
[:blank:]
The character is either space or tab
Chapter 14: Expansion 60
[:cntrl:]
The character is a control character
[:digit:]
The character is a decimal digit
[:graph:]
The character is a printable character other than whitespace
[:lower:]
The character is a lowercase letter
[:print:]
The character is printable
[:punct:]
The character is printable but neither alphanumeric nor whitespace
[:space:]
The character is whitespace
[:upper:]
The character is an uppercase letter
[:xdigit:]
The character is a hexadecimal digit
Another set of named classes is handled internally by the shell and is not sensitive
to the locale:
[:IDENT:]
The character is allowed to form part of a shell identier, such as a
parameter name
[:IFS:] The character is used as an input eld separator, i.e. is contained in
the IFS parameter
[:IFSSPACE:]
The character is an IFS white space character; see the documentation
for IFS in Section 15.6 [Parameters Used By The Shell], page 80.
[:WORD:] The character is treated as part of a word; this test is sensitive to the
value of the WORDCHARS parameter
Note that the square brackets are additional to those enclosing the whole set of
characters, so to test for a single alphanumeric character you need [[:alnum:]].
Named character sets can be used alongside other types, e.g. [[:alpha:]0-9].
[^...]
[!...] Like [...], except that it matches any character which is not in the given set.
<[x]-[y]> Matches any number in the range x to y, inclusive. Either of the numbers may be
omitted to make the range open-ended; hence <-> matches any number. To match
individual digits, the [...] form is more ecient.
Be careful when using other wildcards adjacent to patterns of this form; for example,
<0-9>* will actually match any number whatsoever at the start of the string, since
the <0-9> will match the rst digit, and the * will match any others. This is a
trap for the unwary, but is in fact an inevitable consequence of the rule that the
longest possible match always succeeds. Expressions such as <0-9>[^[:digit:]]*
can be used instead.
Chapter 14: Expansion 61
(...) Matches the enclosed pattern. This is used for grouping. If the KSH_GLOB option is
set, then a @, *, +, ? or ! immediately preceding the ( is treated specially,
as detailed below. The option SH_GLOB prevents bare parentheses from being used
in this way, though the KSH_GLOB option is still available.
Note that grouping cannot extend over multiple directories: it is an error to have
a / within a group (this only applies for patterns used in lename generation).
There is one exception: a group of the form (pat/)# appearing as a complete path
segment can match a sequence of directories. For example, foo/(a*/)#bar matches
foo/bar, foo/any/bar, foo/any/anyother/bar, and so on.
x|y Matches either x or y. This operator has lower precedence than any other. The |
character must be within parentheses, to avoid interpretation as a pipeline.
^x (Requires EXTENDED_GLOB to be set.) Matches anything except the pattern x. This
has a higher precedence than /, so ^foo/bar will search directories in . except
./foo for a le named bar.
x~y (Requires EXTENDED_GLOB to be set.) Match anything that matches the pattern
x but does not match y. This has lower precedence than any operator except
|, so */*~foo/bar will search for all les in all directories in . and then ex-
clude foo/bar if there was such a match. Multiple patterns can be excluded by
foo~bar~baz. In the exclusion pattern (y), / and . are not treated specially the
way they usually are in globbing.
x# (Requires EXTENDED_GLOB to be set.) Matches zero or more occurrences of the
pattern x. This operator has high precedence; 12# is equivalent to 1(2#), rather
than (12)#. It is an error for an unquoted # to follow something which cannot
be repeated; this includes an empty string, a pattern already followed by ##, or
parentheses when part of a KSH_GLOB pattern (for example, !(foo)# is invalid and
must be replaced by *(!(foo))).
x## (Requires EXTENDED_GLOB to be set.) Matches one or more occurrences of the pattern
x. This operator has high precedence; 12## is equivalent to 1(2##), rather than
(12)##. No more than two active # characters may appear together. (Note the
potential clash with glob qualiers in the form 1(2##) which should therefore be
avoided.)
14.8.2 ksh-like Glob Operators
If the KSH_GLOB option is set, the eects of parentheses can be modied by a preceding @, *,
+, ? or !. This character need not be unquoted to have special eects, but the ( must be.
@(...) Match the pattern in the parentheses. (Like (...).)
*(...) Match any number of occurrences. (Like (...)#, except that recursive directory
searching is not supported.)
+(...) Match at least one occurrence. (Like (...)##, except that recursive directory search-
ing is not supported.)
?(...) Match zero or one occurrence. (Like (|...).)
!(...) Match anything but the expression in parentheses. (Like (^(...)).)
14.8.3 Precedence
The precedence of the operators given above is (highest) ^, /, ~, | (lowest); the remaining
operators are simply treated from left to right as part of a string, with # and ## applying
to the shortest possible preceding unit (i.e. a character, ?, [...], <...>, or a parenthesised
Chapter 14: Expansion 62
expression). As mentioned above, a / used as a directory separator may not appear inside
parentheses, while a | must do so; in patterns used in other contexts than lename generation
(for example, in case statements and tests within [[...]]), a / is not special; and / is also
not special after a ~ appearing outside parentheses in a lename pattern.
14.8.4 Globbing Flags
There are various ags which aect any text to their right up to the end of the enclosing group
or to the end of the pattern; they require the EXTENDED_GLOB option. All take the form (#X)
where X may have one of the following forms:
i Case insensitive: upper or lower case characters in the pattern match upper or lower
case characters.
l Lower case characters in the pattern match upper or lower case characters; upper
case characters in the pattern still only match upper case characters.
I Case sensitive: locally negates the eect of i or l from that point on.
b Activate backreferences for parenthesised groups in the pattern; this does not work
in lename generation. When a pattern with a set of active parentheses is matched,
the strings matched by the groups are stored in the array $match, the indices of the
beginning of the matched parentheses in the array $mbegin, and the indices of the
end in the array $mend, with the rst element of each array corresponding to the
rst parenthesised group, and so on. These arrays are not otherwise special to the
shell. The indices use the same convention as does parameter substitution, so that
elements of $mend and $mbegin may be used in subscripts; the KSH_ARRAYS option
is respected. Sets of globbing ags are not considered parenthesised groups; only
the rst nine active parentheses can be referenced.
For example,
foo="a string with a message"
if [[ $foo = (a|an) (#b)(*) * ]]; then
print ${foo[$mbegin[1],$mend[1]]}
fi
prints string with a. Note that the rst parenthesis is before the (#b) and does
not create a backreference.
Backreferences work with all forms of pattern matching other than lename gen-
eration, but note that when performing matches on an entire array, such as
${array#pattern}, or a global substitution, such as ${param//pat/repl}, only the
data for the last match remains available. In the case of global replacements this
may still be useful. See the example for the m ag below.
The numbering of backreferences strictly follows the order of the opening parentheses
from left to right in the pattern string, although sets of parentheses may be nested.
There are special rules for parentheses followed by # or ##. Only the last match
of the parenthesis is remembered: for example, in [[ abab = (#b)([ab])# ]],
only the nal b is stored in match[1]. Thus extra parentheses may be necessary
to match the complete segment: for example, use X((ab|cd)#)Y to match a whole
string of either ab or cd between X and Y, using the value of $match[1] rather
than $match[2].
If the match fails none of the parameters is altered, so in some cases it may be
necessary to initialise them beforehand. If some of the backreferences fail to match
which happens if they are in an alternate branch which fails to match, or if they
are followed by # and matched zero times then the matched string is set to the
empty string, and the start and end indices are set to -1.
Chapter 14: Expansion 63
Pattern matching with backreferences is slightly slower than without.
B Deactivate backreferences, negating the eect of the b ag from that point on.
cN,M The ag (#cN,M) can be used anywhere that the # or ## operators can be used
except in the expressions (*/)# and (*/)## in lename generation, where /
has special meaning; it cannot be combined with other globbing ags and a bad
pattern error occurs if it is misplaced. It is equivalent to the form {N,M} in
regular expressions. The previous character or group is required to match between
N and M times, inclusive. The form (#cN) requires exactly N matches; (#c,M) is
equivalent to specifying N as 0; (#cN,) species that there is no maximum limit
on the number of matches.
m Set references to the match data for the entire string matched; this is similar to
backreferencing and does not work in lename generation. The ag must be in
eect at the end of the pattern, i.e. not local to a group. The parameters $MATCH,
$MBEGIN and $MEND will be set to the string matched and to the indices of the
beginning and end of the string, respectively. This is most useful in parameter
substitutions, as otherwise the string matched is obvious.
For example,
arr=(veldt jynx grimps waqf zho buck)
print ${arr//(#m)[aeiou]/${(U)MATCH}}
forces all the matches (i.e. all vowels) into uppercase, printing vEldt jynx grImps
wAqf zhO bUck.
Unlike backreferences, there is no speed penalty for using match references, other
than the extra substitutions required for the replacement strings in cases such as
the example shown.
M Deactivate the m ag, hence no references to match data will be created.
anum Approximate matching: num errors are allowed in the string matched by the pattern.
The rules for this are described in the next subsection.
s, e Unlike the other ags, these have only a local eect, and each must appear on its
own: (#s) and (#e) are the only valid forms. The (#s) ag succeeds only
at the start of the test string, and the (#e) ag succeeds only at the end of the
test string; they correspond to ^ and $ in standard regular expressions. They
are useful for matching path segments in patterns other than those in lename
generation (where path segments are in any case treated separately). For example,
*((#s)|/)test((#e)|/)* matches a path segment test in any of the following
strings: test, test/at/start, at/end/test, in/test/middle.
Another use is in parameter substitution; for example ${array/(#s)A*Z(#e)} will
remove only elements of an array which match the complete pattern A*Z. There
are other ways of performing many operations of this type, however the combination
of the substitution operations / and // with the (#s) and (#e) ags provides
a single simple and memorable method.
Note that assertions of the form (^(#s)) also work, i.e. match anywhere except
at the start of the string, although this actually means anything except a zero-
length portion at the start of the string; you need to use (""~(#s)) to match a
zero-length portion of the string not at the start.
q A q and everything up to the closing parenthesis of the globbing ags are ignored
by the pattern matching code. This is intended to support the use of glob qualiers,
see below. The result is that the pattern (#b)(*).c(#q.) can be used both for
Chapter 14: Expansion 64
globbing and for matching against a string. In the former case, the (#q.) will
be treated as a glob qualier and the (#b) will not be useful, while in the latter
case the (#b) is useful for backreferences and the (#q.) will be ignored. Note
that colon modiers in the glob qualiers are also not applied in ordinary pattern
matching.
u Respect the current locale in determining the presence of multibyte characters in a
pattern, provided the shell was compiled with MULTIBYTE_SUPPORT. This overrides
the MULTIBYTE option; the default behaviour is taken from the option. Compare U.
(Mnemonic: typically multibyte characters are from Unicode in the UTF-8 encoding,
although any extension of ASCII supported by the system library may be used.)
U All characters are considered to be a single byte long. The opposite of u. This
overrides the MULTIBYTE option.
For example, the test string fooxx can be matched by the pattern (#i)FOOXX, but not by
(#l)FOOXX, (#i)FOO(#I)XX or ((#i)FOOX)X. The string (#ia2)readme species case-insensitive
matching of readme with up to two errors.
When using the ksh syntax for grouping both KSH_GLOB and EXTENDED_GLOB must be set and
the left parenthesis should be preceded by @. Note also that the ags do not aect letters inside
[...] groups, in other words (#i)[a-z] still matches only lowercase letters. Finally, note that
when examining whole paths case-insensitively every directory must be searched for all les
which match, so that a pattern of the form (#i)/foo/bar/... is potentially slow.
14.8.5 Approximate Matching
When matching approximately, the shell keeps a count of the errors found, which cannot exceed
the number specied in the (#anum) ags. Four types of error are recognised:
1. Dierent characters, as in fooxbar and fooybar.
2. Transposition of characters, as in banana and abnana.
3. A character missing in the target string, as with the pattern road and target string
rod.
4. An extra character appearing in the target string, as with stove and strove.
Thus, the pattern (#a3)abcd matches dcba, with the errors occurring by using the rst rule
twice and the second once, grouping the string as [d][cb][a] and [a][bc][d].
Non-literal parts of the pattern must match exactly, including characters in character ranges:
hence (#a1)??? matches strings of length four, by applying rule 4 to an empty part of the
pattern, but not strings of length two, since all the ? must match. Other characters which must
match exactly are initial dots in lenames (unless the GLOB_DOTS option is set), and all slashes
in lenames, so that a/bc is two errors from ab/c (the slash cannot be transposed with another
character). Similarly, errors are counted separately for non-contiguous strings in the pattern, so
that (ab|cd)ef is two errors from aebf.
When using exclusion via the ~ operator, approximate matching is treated entirely separately
for the excluded part and must be activated separately. Thus, (#a1)README~READ_ME matches
READ.ME but not READ_ME, as the trailing READ_ME is matched without approximation. However,
(#a1)README~(#a1)READ_ME does not match any pattern of the form READ?ME as all such forms
are now excluded.
Apart from exclusions, there is only one overall error count; however, the maximum er-
rors allowed may be altered locally, and this can be delimited by grouping. For example,
(#a1)cat((#a0)dog)fox allows one error in total, which may not occur in the dog section,
and the pattern (#a1)cat(#a0)dog(#a1)fox is equivalent. Note that the point at which an
Chapter 14: Expansion 65
error is rst found is the crucial one for establishing whether to use approximation; for ex-
ample, (#a1)abc(#a0)xyz will not match abcdxyz, because the error occurs at the x, where
approximation is turned o.
Entire path segments may be matched approximately, so that
(#a1)/foo/d/is/available/at/the/bar allows one error in any path segment.
This is much less ecient than without the (#a1), however, since every directory in the path
must be scanned for a possible approximate match. It is best to place the (#a1) after any path
segments which are known to be correct.
14.8.6 Recursive Globbing
A pathname component of the form (foo/)# matches a path consisting of zero or more direc-
tories matching the pattern foo.
As a shorthand, **/ is equivalent to (*/)#; note that this therefore matches les in the
current directory as well as subdirectories. Thus:
ls (*/)#bar
or
ls **/bar
does a recursive directory search for les named bar (potentially including the le bar in the
current directory). This form does not follow symbolic links; the alternative form ***/ does,
but is otherwise identical. Neither of these can be combined with other forms of globbing within
the same path segment; in that case, the * operators revert to their usual eect.
14.8.7 Glob Qualiers
Patterns used for lename generation may end in a list of qualiers enclosed in parentheses. The
qualiers specify which lenames that otherwise match the given pattern will be inserted in the
argument list.
If the option BARE_GLOB_QUAL is set, then a trailing set of parentheses containing no | or (
characters (or ~ if it is special) is taken as a set of glob qualiers. A glob subexpression that
would normally be taken as glob qualiers, for example (^x), can be forced to be treated as
part of the glob pattern by doubling the parentheses, in this case producing ((^x)).
If the option EXTENDED_GLOB is set, a dierent syntax for glob qualiers is available, namely
(#qx) where x is any of the same glob qualiers used in the other format. The qualiers must
still appear at the end of the pattern. However, with this syntax multiple glob qualiers may
be chained together. They are treated as a logical AND of the individual sets of ags. Also,
as the syntax is unambiguous, the expression will be treated as glob qualiers just as long any
parentheses contained within it are balanced; appearance of |, ( or ~ does not negate the
eect. Note that qualiers will be recognised in this form even if a bare glob qualier exists at
the end of the pattern, for example *(#q*)(.) will recognise executable regular les if both
options are set; however, mixed syntax should probably be avoided for the sake of clarity. Note
that within conditions using the [[ form the presence of a parenthesised expression (#q...)
at the end of a string indicates that globbing should be performed; the expression may include
glob qualiers, but it is also valid if it is simply (#q). This does not apply to the right hand
side of pattern match operators as the syntax already has special signicance.
A qualier may be any one of the following:
/ directories
F full (i.e. non-empty) directories. Note that the opposite sense (^F) expands to
empty directories and all non-directories. Use (/^F) for empty directories.
. plain les
Chapter 14: Expansion 66
@ symbolic links
= sockets
p named pipes (FIFOs)
* executable plain les (0100)
% device les (character or block special)
%b block special les
%c character special les
r owner-readable les (0400)
w owner-writable les (0200)
x owner-executable les (0100)
A group-readable les (0040)
I group-writable les (0020)
E group-executable les (0010)
R world-readable les (0004)
W world-writable les (0002)
X world-executable les (0001)
s setuid les (04000)
S setgid les (02000)
t les with the sticky bit (01000)
fspec les with access rights matching spec. This spec may be a octal number optionally
preceded by a =, a +, or a -. If none of these characters is given, the behavior
is the same as for =. The octal number describes the mode bits to be expected,
if combined with a =, the value given must match the le-modes exactly, with a
+, at least the bits in the given number must be set in the le-modes, and with
a -, the bits in the number must not be set. Giving a ? instead of a octal digit
anywhere in the number ensures that the corresponding bits in the le-modes are
not checked, this is only useful in combination with =.
If the qualier f is followed by any other character anything up to the next matching
character ([, {, and < match ], }, and > respectively, any other character
matches itself) is taken as a list of comma-separated sub-specs. Each sub-spec may
be either an octal number as described above or a list of any of the characters u,
g, o, and a, followed by a =, a +, or a -, followed by a list of any of the
characters r, w, x, s, and t, or an octal digit. The rst list of characters
specify which access rights are to be checked. If a u is given, those for the owner
of the le are used, if a g is given, those of the group are checked, a o means
to test those of other users, and the a says to test all three groups. The =, +,
and - again says how the modes are to be checked and have the same meaning as
described for the rst form above. The second list of characters nally says which
access rights are to be expected: r for read access, w for write access, x for the
right to execute the le (or to search a directory), s for the setuid and setgid bits,
and t for the sticky bit.
Thus, *(f70?) gives the les for which the owner has read, write, and execute
permission, and for which other group members have no rights, independent of the
Chapter 14: Expansion 67
permissions for other users. The pattern *(f-100) gives all les for which the
owner does not have execute permission, and *(f:gu+w,o-rx:) gives the les for
which the owner and the other members of the group have at least write permission,
and for which other users dont have read or execute permission.
estring
+cmd The string will be executed as shell code. The lename will be included in the list if
and only if the code returns a zero status (usually the status of the last command).
In the rst form, the rst character after the e will be used as a separator and
anything up to the next matching separator will be taken as the string; [, {,
and < match ], }, and >, respectively, while any other character matches itself.
Note that expansions must be quoted in the string to prevent them from being
expanded before globbing is done. string is then executed as shell code. The string
globqual is appended to the array zsh_eval_context the duration of execution.
During the execution of string the lename currently being tested is available in the
parameter REPLY; the parameter may be altered to a string to be inserted into the
list instead of the original lename. In addition, the parameter reply may be set
to an array or a string, which overrides the value of REPLY. If set to an array, the
latter is inserted into the command line word by word.
For example, suppose a directory contains a single le lonely. Then the expression
*(e:reply=(${REPLY}{1,2}):) will cause the words lonely1 and lonely2
to be inserted into the command line. Note the quoting of string.
The form +cmd has the same eect, but no delimiters appear around cmd. In-
stead, cmd is taken as the longest sequence of characters following the + that are
alphanumeric or underscore. Typically cmd will be the name of a shell function that
contains the appropriate test. For example,
nt() { [[ $REPLY -nt $NTREF ]] }
NTREF=reffile
ls -l *(+nt)
lists all les in the directory that have been modied more recently than reffile.
ddev les on the device dev
l[-|+]ct les having a link count less than ct (-), greater than ct (+), or equal to ct
U les owned by the eective user ID
G les owned by the eective group ID
uid les owned by user ID id if that is a number. Otherwise, id species a user name:
the character after the u will be taken as a separator and the string between
it and the next matching separator will be taken as a user name. The starting
separators [, {, and < match the nal separators ], }, and >, respectively;
any other character matches itself. The selected les are those owned by this user.
For example, u:foo: or u[foo] selects les owned by user foo.
gid like uid but with group IDs or names
a[Mwhms][-|+]n
les accessed exactly n days ago. Files accessed within the last n days are selected
using a negative value for n (-n). Files accessed more than n days ago are selected
by a positive n value (+n). Optional unit speciers M, w, h, m or s (e.g. ah5)
cause the check to be performed with months (of 30 days), weeks, hours, minutes
or seconds instead of days, respectively. An explicit d for days is also allowed.
Chapter 14: Expansion 68
Any fractional part of the dierence between the access time and the current part
in the appropriate units is ignored in the comparison. For instance, echo *(ah-5)
would echo les accessed within the last ve hours, while echo *(ah+5) would
echo les accessed at least six hours ago, as times strictly between ve and six hours
are treated as ve hours.
m[Mwhms][-|+]n
like the le access qualier, except that it uses the le modication time.
c[Mwhms][-|+]n
like the le access qualier, except that it uses the le inode change time.
L[+|-]n les less than n bytes (-), more than n bytes (+), or exactly n bytes in length.
If this ag is directly followed by a size specier k (K), m (M), or p (P) (e.g.
Lk-50) the check is performed with kilobytes, megabytes, or blocks (of 512 bytes)
instead. (On some systems additional speciers are available for gigabytes, g or
G, and terabytes, t or T.) If a size specier is used a le is regarded as "exactly"
the size if the le size rounded up to the next unit is equal to the test size. Hence
*(Lm1) matches les from 1 byte up to 1 Megabyte inclusive. Note also that the
set of les "less than" the test size only includes les that would not match the
equality test; hence *(Lm-1) only matches les of zero size.
^ negates all qualiers following it
- toggles between making the qualiers work on symbolic links (the default) and the
les they point to
M sets the MARK_DIRS option for the current pattern
T appends a trailing qualier mark to the lenames, analogous to the LIST_TYPES
option, for the current pattern (overrides M)
N sets the NULL_GLOB option for the current pattern
D sets the GLOB_DOTS option for the current pattern
n sets the NUMERIC_GLOB_SORT option for the current pattern
Yn enables short-circuit mode: the pattern will expand to at most n lenames. If more
than n matches exist, only the rst n matches in directory traversal order will be
considered.
Implies oN when no oc qualier is used.
oc species how the names of the les should be sorted. If c is n they are sorted by
name; if it is L they are sorted depending on the size (length) of the les; if l they
are sorted by the number of links; if a, m, or c they are sorted by the time of the
last access, modication, or inode change respectively; if d, les in subdirectories
appear before those in the current directory at each level of the search this is best
combined with other criteria, for example odon to sort on names for les within
the same directory; if N, no sorting is performed. Note that a, m, and c compare the
age against the current time, hence the rst name in the list is the youngest le.
Also note that the modiers ^ and - are used, so *(^-oL) gives a list of all les
sorted by le size in descending order, following any symbolic links. Unless oN is
used, multiple order speciers may occur to resolve ties.
The default sorting is n (by name) unless the Y glob qualier is used, in which case
it is N (unsorted).
oe and o+ are special cases; they are each followed by shell code, delimited as for
the e glob qualier and the + glob qualier respectively (see above). The code is
Chapter 14: Expansion 69
executed for each matched le with the parameter REPLY set to the name of the le
on entry and globsort appended to zsh_eval_context. The code should modify
the parameter REPLY in some fashion. On return, the value of the parameter is used
instead of the le name as the string on which to sort. Unlike other sort operators,
oe and o+ may be repeated, but note that the maximum number of sort operators
of any kind that may appear in any glob expression is 12.
Oc like o, but sorts in descending order; i.e. *(^oc) is the same as *(Oc) and
*(^Oc) is the same as *(oc); Od puts les in the current directory before those
in subdirectories at each level of the search.
[beg[,end]]
species which of the matched lenames should be included in the returned list.
The syntax is the same as for array subscripts. beg and the optional end may be
mathematical expressions. As in parameter subscripting they may be negative to
make them count from the last match backward. E.g.: *(-OL[1,3]) gives a list of
the names of the three largest les.
Pstring The string will be prepended to each glob match as a separate word. string is
delimited in the same way as arguments to the e glob qualier described above. The
qualier can be repeated; the words are prepended separately so that the resulting
command line contains the words in the same order they were given in the list of
glob qualiers.
A typical use for this is to prepend an option before all occurrences of a le name;
for example, the pattern *(P:-f:) produces the command line arguments -f le1
-f le2 ...
More than one of these lists can be combined, separated by commas. The whole list matches if
at least one of the sublists matches (they are ored, the qualiers in the sublists are anded).
Some qualiers, however, aect all matches generated, independent of the sublist in which they
are given. These are the qualiers M, T, N, D, n, o, O and the subscripts given in brackets
([...]).
If a : appears in a qualier list, the remainder of the expression in parenthesis is interpreted as
a modier (see Section 14.1.4 [Modiers], page 40 in Section 14.1 [History Expansion], page 38).
Each modier must be introduced by a separate :. Note also that the result after modication
does not have to be an existing le. The name of any existing le can be followed by a modier
of the form (:..) even if no actual lename generation is performed, although note that the
presence of the parentheses causes the entire expression to be subjected to any global pattern
matching options such as NULL_GLOB. Thus:
ls *(-/)
lists all directories and symbolic links that point to directories, and
ls *(%W)
lists all world-writable device les in the current directory, and
ls *(W,X)
lists all les in the current directory that are world-writable or world-executable, and
echo /tmp/foo*(u0^@:t)
outputs the basename of all root-owned les beginning with the string foo in /tmp, ignoring
symlinks, and
ls *.*~(lex|parse).[ch](^D^l1)
lists all les having a link count of one whose names contain a dot (but not those starting with a
dot, since GLOB_DOTS is explicitly switched o) except for lex.c, lex.h, parse.c and parse.h.
Chapter 15: Parameters 70
print b*.pro(#q:s/pro/shmo/)(#q.:s/builtin/shmiltin/)
demonstrates how colon modiers and other qualiers may be chained together. The ordi-
nary qualier . is applied rst, then the colon modiers in order from left to right. So if
EXTENDED_GLOB is set and the base pattern matches the regular le builtin.pro, the shell will
print shmiltin.shmo.
15 Parameters
15.1 Description
A parameter has a name, a value, and a number of attributes. A name may be any sequence
of alphanumeric characters and underscores, or the single characters *, @, #, ?, -, $, or
!. The value may be a scalar (a string), an integer, an array (indexed numerically), or an
associative array (an unordered set of name-value pairs, indexed by name). To declare the type
of a parameter, or to assign a scalar or integer value to a parameter, use the typeset builtin.
The value of a scalar or integer parameter may also be assigned by writing:
name=value
If the integer attribute, -i, is set for name, the value is subject to arithmetic evaluation. Fur-
thermore, by replacing = with +=, a parameter can be added or appended to.
In scalar assignment, value is expanded as a single string, in which the elements of arrays are
joined together; lename expansion is not performed unless the option GLOB_ASSIGN is set. See
Section 15.2 [Array Parameters], page 70 for additional forms of assignment.
To refer to the value of a parameter, write $name or ${name}. See Section 14.3 [Parameter
Expansion], page 43 for complete details. This section also explains the eect of the dierence
between scalar and array assignment on parameter expansion.
In the parameter lists that follow, the mark <S> indicates that the parameter is special. Special
parameters cannot have their type changed or their readonly attribute turned o, and if a special
parameter is unset, then later recreated, the special properties will be retained. <Z> indicates
that the parameter does not exist when the shell initializes in sh or ksh emulation mode.
15.2 Array Parameters
To assign an array value, write one of:
set -A name value ...
name=(value ...)
If no parameter name exists, an ordinary array parameter is created. If the parameter name
exists and is a scalar, it is replaced by a new array. Ordinary array parameters may also be
explicitly declared with:
typeset -a name
Associative arrays must be declared before assignment, by using:
typeset -A name
When name refers to an associative array, the list in an assignment is interpreted as alternating
keys and values:
set -A name key value ...
name=(key value ...)
Chapter 15: Parameters 71
Every key must have a value in this case. Note that this assigns to the entire array, deleting
any elements that do not appear in the list.
To create an empty array (including associative arrays), use one of:
set -A name
name=()
15.2.1 Array Subscripts
Individual elements of an array may be selected using a subscript. A subscript of the form [exp]
selects the single element exp, where exp is an arithmetic expression which will be subject
to arithmetic expansion as if it were surrounded by $((...)). The elements are numbered
beginning with 1, unless the KSH_ARRAYS option is set in which case they are numbered from
zero.
Subscripts may be used inside braces used to delimit a parameter name, thus ${foo[2]} is
equivalent to $foo[2]. If the KSH_ARRAYS option is set, the braced form is the only one that
works, as bracketed expressions otherwise are not treated as subscripts.
If the KSH_ARRAYS option is not set, then by default accesses to an array element with a subscript
that evaluates to zero return an empty string, while an attempt to write such an element is
treated as an error. For backward compatibility the KSH_ZERO_SUBSCRIPT option can be set to
cause subscript values 0 and 1 to be equivalent; see the description of the option in Section 16.2
[Description of Options], page 89.
The same subscripting syntax is used for associative arrays, except that no arithmetic expansion
is applied to exp. However, the parsing rules for arithmetic expressions still apply, which aects
the way that certain special characters must be protected from interpretation. See Subscript
Parsing below for details.
A subscript of the form [*] or [@] evaluates to all elements of an array; there is no dierence
between the two except when they appear within double quotes. "$foo[*]" evaluates to
"$foo[1] $foo[2] ...", whereas "$foo[@]" evaluates to "$foo[1]" "$foo[2]" .... For
associative arrays, [*] or [@] evaluate to all the values, in no particular order. Note that
this does not substitute the keys; see the documentation for the k ag under Section 14.3
[Parameter Expansion], page 43 for complete details. When an array parameter is referenced as
$name (with no subscript) it evaluates to $name[*], unless the KSH_ARRAYS option is set in
which case it evaluates to ${name[0]} (for an associative array, this means the value of the
key 0, which may not exist even if there are values for other keys).
A subscript of the form [exp1,exp2] selects all elements in the range exp1 to exp2, inclusive.
(Associative arrays are unordered, and so do not support ranges.) If one of the subscripts
evaluates to a negative number, say -n, then the nth element from the end of the array is used.
Thus $foo[-3] is the third element from the end of the array foo, and $foo[1,-1] is the
same as $foo[*].
Subscripting may also be performed on non-array values, in which case the subscripts specify a
substring to be extracted. For example, if FOO is set to foobar, then echo $FOO[2,5] prints
ooba.
15.2.2 Array Element Assignment
A subscript may be used on the left side of an assignment like so:
name[exp]=value
In this form of assignment the element or range specied by exp is replaced by the expression
on the right side. An array (but not an associative array) may be created by assignment to a
Chapter 15: Parameters 72
range or element. Arrays do not nest, so assigning a parenthesized list of values to an element or
range changes the number of elements in the array, shifting the other elements to accommodate
the new values. (This is not supported for associative arrays.)
This syntax also works as an argument to the typeset command:
typeset "name[exp]"=value
The value may not be a parenthesized list in this case; only single-element assignments may be
made with typeset. Note that quotes are necessary in this case to prevent the brackets from
being interpreted as lename generation operators. The noglob precommand modier could be
used instead.
To delete an element of an ordinary array, assign () to that element. To delete an element of
an associative array, use the unset command:
unset "name[exp]"
15.2.3 Subscript Flags
If the opening bracket, or the comma in a range, in any subscript expression is directly followed
by an opening parenthesis, the string up to the matching closing one is considered to be a list
of ags, as in name[(ags)exp].
The ags s, n and b take an argument; the delimiter is shown below as :, but any character, or
the matching pairs (...), {...}, [...], or <...>, may be used, but note that <...> can only be
used if the subscript is inside a double quoted expression or a parameter substitution enclosed
in braces as otherwise the expression is interpreted as a redirection.
The ags currently understood are:
w If the parameter subscripted is a scalar then this ag makes subscripting work on
words instead of characters. The default word separator is whitespace. This ag
may not be used with the i or I ag.
s:string: This gives the string that separates words (for use with the w ag). The delimiter
character : is arbitrary; see above.
p Recognize the same escape sequences as the print builtin in the string argument of
a subsequent s ag.
f If the parameter subscripted is a scalar then this ag makes subscripting work on
lines instead of characters, i.e. with elements separated by newlines. This is a
shorthand for pws:\n:.
r Reverse subscripting: if this ag is given, the exp is taken as a pattern and the
result is the rst matching array element, substring or word (if the parameter is an
array, if it is a scalar, or if it is a scalar and the w ag is given, respectively). The
subscript used is the number of the matching element, so that pairs of subscripts
such as $foo[(r)??,3] and $foo[(r)??,(r)f*] are possible if the parameter is
not an associative array. If the parameter is an associative array, only the value
part of each pair is compared to the pattern, and the result is that value.
If a search through an ordinary array failed, the search sets the subscript to one past
the end of the array, and hence ${array[(r)pattern]} will substitute the empty
string. Thus the success of a search can be tested by using the (i) ag, for example
(assuming the option KSH_ARRAYS is not in eect):
[[ ${array[(i)pattern]} -le ${#array} ]]
If KSH_ARRAYS is in eect, the -le should be replaced by -lt.
Chapter 15: Parameters 73
R Like r, but gives the last match. For associative arrays, gives all possible matches.
May be used for assigning to ordinary array elements, but not for assigning to
associative arrays. On failure, for normal arrays this has the eect of returning
the element corresponding to subscript 0; this is empty unless one of the options
KSH_ARRAYS or KSH_ZERO_SUBSCRIPT is in eect.
Note that in subscripts with both r and R pattern characters are active even
if they were substituted for a parameter (regardless of the setting of GLOB_SUBST
which controls this feature in normal pattern matching). The ag e can be added
to inhibit pattern matching. As this ag does not inhibit other forms of substitution,
care is still required; using a parameter to hold the key has the desired eect:
key2=original key
print ${array[(Re)$key2]}
i Like r, but gives the index of the match instead; this may not be combined with a
second argument. On the left side of an assignment, behaves like r. For associative
arrays, the key part of each pair is compared to the pattern, and the rst matching
key found is the result. On failure substitutes the length of the array plus one, as
discussed under the description of r, or the empty string for an associative array.
I Like i, but gives the index of the last match, or all possible matching keys in an
associative array. On failure substitutes 0, or the empty string for an associative
array. This ag is best when testing for values or keys that do not exist.
k If used in a subscript on an associative array, this ag causes the keys to be in-
terpreted as patterns, and returns the value for the rst key found where exp is
matched by the key. Note this could be any such key as no ordering of associative
arrays is dened. This ag does not work on the left side of an assignment to an
associative array element. If used on another type of parameter, this behaves like
r.
K On an associative array this is like k but returns all values where exp is matched
by the keys. On other types of parameters this has the same eect as R.
n:expr: If combined with r, R, i or I, makes them give the nth or nth last match
(if expr evaluates to n). This ag is ignored when the array is associative. The
delimiter character : is arbitrary; see above.
b:expr: If combined with r, R, i or I, makes them begin at the nth or nth last element,
word, or character (if expr evaluates to n). This ag is ignored when the array is
associative. The delimiter character : is arbitrary; see above.
e This ag causes any pattern matching that would be performed on the subscript to
use plain string matching instead. Hence ${array[(re)*]} matches only the array
element whose value is *. Note that other forms of substitution such as parameter
substitution are not inhibited.
This ag can also be used to force * or @ to be interpreted as a single key rather
than as a reference to all values. It may be used for either purpose on the left side
of an assignment.
See Parameter Expansion Flags (Section 14.3 [Parameter Expansion], page 43) for additional
ways to manipulate the results of array subscripting.
15.2.4 Subscript Parsing
This discussion applies mainly to associative array key strings and to patterns used for reverse
subscripting (the r, R, i, etc. ags), but it may also aect parameter substitutions that
appear as part of an arithmetic expression in an ordinary subscript.
Chapter 15: Parameters 74
It is possible to avoid the use of subscripts in assignments to associative array elements by using
the syntax:
aa+=(key with "*strange*" characters value string)
This adds a new key/value pair if the key is not already present, and replaces the value for the
existing key if it is.
The basic rule to remember when writing a subscript expression is that all text between the
opening [ and the closing ] is interpreted as if it were in double quotes (Section 6.9 [Quoting],
page 15). However, unlike double quotes which normally cannot nest, subscript expressions may
appear inside double-quoted strings or inside other subscript expressions (or both!), so the rules
have two important dierences.
The rst dierence is that brackets ([ and ]) must appear as balanced pairs in a subscript
expression unless they are preceded by a backslash (\). Therefore, within a subscript expression
(and unlike true double-quoting) the sequence \[ becomes [, and similarly \] becomes ].
This applies even in cases where a backslash is not normally required; for example, the pattern
[^[] (to match any character other than an open bracket) should be written [^\[] in a
reverse-subscript pattern. However, note that \[^\[\] and even \[^[] mean the same thing,
because backslashes are always stripped when they appear before brackets!
The same rule applies to parentheses (( and )) and braces ({ and }): they must appear
either in balanced pairs or preceded by a backslash, and backslashes that protect parentheses or
braces are removed during parsing. This is because parameter expansions may be surrounded
by balanced braces, and subscript ags are introduced by balanced parentheses.
The second dierence is that a double-quote (") may appear as part of a subscript expression
without being preceded by a backslash, and therefore that the two characters \" remain as
two characters in the subscript (in true double-quoting, \" becomes "). However, because of
the standard shell quoting rules, any double-quotes that appear must occur in balanced pairs
unless preceded by a backslash. This makes it more dicult to write a subscript expression that
contains an odd number of double-quote characters, but the reason for this dierence is so that
when a subscript expression appears inside true double-quotes, one can still write \" (rather
than \\\") for ".
To use an odd number of double quotes as a key in an assignment, use the typeset builtin and
an enclosing pair of double quotes; to refer to the value of that key, again use double quotes:
typeset -A aa
typeset "aa[one\"two\"three\"quotes]"=QQQ
print "$aa[one\"two\"three\"quotes]"
It is important to note that the quoting rules do not change when a parameter expansion with
a subscript is nested inside another subscript expression. That is, it is not necessary to use
additional backslashes within the inner subscript expression; they are removed only once, from
the innermost subscript outwards. Parameters are also expanded from the innermost subscript
rst, as each expansion is encountered left to right in the outer expression.
A further complication arises from a way in which subscript parsing is not dierent from double
quote parsing. As in true double-quoting, the sequences \*, and \@ remain as two characters
when they appear in a subscript expression. To use a literal * or @ as an associative array
key, the e ag must be used:
typeset -A aa
aa[(e)*]=star
print $aa[(e)*]
A last detail must be considered when reverse subscripting is performed. Parameters appearing
in the subscript expression are rst expanded and then the complete expression is interpreted
Chapter 15: Parameters 75
as a pattern. This has two eects: rst, parameters behave as if GLOB_SUBST were on (and it
cannot be turned o); second, backslashes are interpreted twice, once when parsing the array
subscript and again when parsing the pattern. In a reverse subscript, its necessary to use four
backslashes to cause a single backslash to match literally in the pattern. For complex patterns,
it is often easiest to assign the desired pattern to a parameter and then refer to that parameter
in the subscript, because then the backslashes, brackets, parentheses, etc., are seen only when
the complete expression is converted to a pattern. To match the value of a parameter literally
in a reverse subscript, rather than as a pattern, use ${(q)name} (Section 14.3 [Parameter
Expansion], page 43) to quote the expanded value.
Note that the k and K ags are reverse subscripting for an ordinary array, but are not reverse
subscripting for an associative array! (For an associative array, the keys in the array itself are
interpreted as patterns by those ags; the subscript is a plain string in that case.)
One nal note, not directly related to subscripting: the numeric names of positional parameters
(Section 15.3 [Positional Parameters], page 75) are parsed specially, so for example $2foo
is equivalent to ${2}foo. Therefore, to use subscript syntax to extract a substring from a
positional parameter, the expansion must be surrounded by braces; for example, ${2[3,5]}
evaluates to the third through fth characters of the second positional parameter, but $2[3,5]
is the entire second parameter concatenated with the lename generation pattern [3,5].
15.3 Positional Parameters
The positional parameters provide access to the command-line arguments of a shell function,
shell script, or the shell itself; see Chapter 4 [Invocation], page 6, and also Chapter 9 [Functions],
page 20. The parameter n, where n is a number, is the nth positional parameter. The parameter
$0 is a special case, see Section 15.5 [Parameters Set By The Shell], page 76.
The parameters *, @ and argv are arrays containing all the positional parameters; thus
$argv[n], etc., is equivalent to simply $n. Note that the options KSH_ARRAYS or
KSH_ZERO_SUBSCRIPT apply to these arrays as well, so with either of those options set,
${argv[0]} is equivalent to $1 and so on.
Positional parameters may be changed after the shell or function starts by using the set builtin,
by assigning to the argv array, or by direct assignment of the form n=value where n is the
number of the positional parameter to be changed. This also creates (with empty values) any
of the positions from 1 to n that do not already have values. Note that, because the positional
parameters form an array, an array assignment of the form n=(value ...) is allowed, and has
the eect of shifting all the values at positions greater than n by as many positions as necessary
to accommodate the new values.
15.4 Local Parameters
Shell function executions delimit scopes for shell parameters. (Parameters are dynamically
scoped.) The typeset builtin, and its alternative forms declare, integer, local and readonly
(but not export), can be used to declare a parameter as being local to the innermost scope.
When a parameter is read or assigned to, the innermost existing parameter of that name is
used. (That is, the local parameter hides any less-local parameter.) However, assigning to a
non-existent parameter, or declaring a new parameter with export, causes it to be created in
the outermost scope.
Local parameters disappear when their scope ends. unset can be used to delete a parameter
while it is still in scope; any outer parameter of the same name remains hidden.
Special parameters may also be made local; they retain their special attributes unless either the
existing or the newly-created parameter has the -h (hide) attribute. This may have unexpected
Chapter 15: Parameters 76
eects: there is no default value, so if there is no assignment at the point the variable is made
local, it will be set to an empty value (or zero in the case of integers). The following:
typeset PATH=/new/directory:$PATH
is valid for temporarily allowing the shell or programmes called from it to nd the programs in
/new/directory inside a function.
Note that the restriction in older versions of zsh that local parameters were never exported has
been removed.
15.5 Parameters Set By The Shell
The following parameters are automatically set by the shell:
! <S> The process ID of the last command started in the background with &, or put into
the background with the bg builtin.
# <S> The number of positional parameters in decimal. Note that some confusion may
occur with the syntax $#param which substitutes the length of param. Use ${#} to
resolve ambiguities. In particular, the sequence $#-... in an arithmetic expression
is interpreted as the length of the parameter -, q.v.
ARGC <S> <Z>
Same as #.
$ <S> The process ID of this shell. Note that this indicates the original shell started by
invoking zsh; all processes forked from the shells without executing a new program,
such as subshells started by (...), substitute the same value.
- <S> Flags supplied to the shell on invocation or by the set or setopt commands.
* <S> An array containing the positional parameters.
argv <S> <Z>
Same as *. Assigning to argv changes the local positional parameters, but argv is
not itself a local parameter. Deleting argv with unset in any function deletes it
everywhere, although only the innermost positional parameter array is deleted (so
* and @ in other scopes are not aected).
@ <S> Same as argv[@], even when argv is not set.
? <S> The exit status returned by the last command.
0 <S> The name used to invoke the current shell, or as set by the -c command line option
upon invocation. If the FUNCTION_ARGZERO option is set, $0 is set upon entry to a
shell function to the name of the function, and upon entry to a sourced script to
the name of the script, and reset to its previous value when the function or script
returns.
status <S> <Z>
Same as ?.
pipestatus <S> <Z>
An array containing the exit statuses returned by all commands in the last pipeline.
_ <S> The last argument of the previous command. Also, this parameter is set in the
environment of every command executed to the full pathname of the command.
CPUTYPE The machine type (microprocessor class or machine model), as determined at run
time.
Chapter 15: Parameters 77
EGID <S> The eective group ID of the shell process. If you have sucient privileges, you may
change the eective group ID of the shell process by assigning to this parameter. Also
(assuming sucient privileges), you may start a single command with a dierent
eective group ID by (EGID=gid; command)
EUID <S> The eective user ID of the shell process. If you have sucient privileges, you may
change the eective user ID of the shell process by assigning to this parameter. Also
(assuming sucient privileges), you may start a single command with a dierent
eective user ID by (EUID=uid; command)
ERRNO <S> The value of errno (see man page errno(3)) as set by the most recently failed system
call. This value is system dependent and is intended for debugging purposes. It is
also useful with the zsh/system module which allows the number to be turned into
a name or message.
GID <S> The real group ID of the shell process. If you have sucient privileges, you may
change the group ID of the shell process by assigning to this parameter. Also
(assuming sucient privileges), you may start a single command under a dierent
group ID by (GID=gid; command)
HISTCMD The current history event number in an interactive shell, in other words the event
number for the command that caused $HISTCMD to be read. If the current history
event modies the history, HISTCMD changes to the new maximum history event
number.
HOST The current hostname.
LINENO <S>
The line number of the current line within the current script, sourced le, or shell
function being executed, whichever was started most recently. Note that in the case
of shell functions the line number refers to the function as it appeared in the original
denition, not necessarily as displayed by the functions builtin.
LOGNAME If the corresponding variable is not set in the environment of the shell, it is initialized
to the login name corresponding to the current login session. This parameter is
exported by default but this can be disabled using the typeset builtin. The value
is set to the string returned by the man page getlogin(3) system call if that is
available.
MACHTYPE The machine type (microprocessor class or machine model), as determined at com-
pile time.
OLDPWD The previous working directory. This is set when the shell initializes and whenever
the directory changes.
OPTARG <S>
The value of the last option argument processed by the getopts command.
OPTIND <S>
The index of the last option argument processed by the getopts command.
OSTYPE The operating system, as determined at compile time.
PPID <S> The process ID of the parent of the shell. As for $$, the value indicates the parent
of the original shell and does not change in subshells.
PWD The present working directory. This is set when the shell initializes and whenever
the directory changes.
Chapter 15: Parameters 78
RANDOM <S>
A pseudo-random integer from 0 to 32767, newly generated each time this parameter
is referenced. The random number generator can be seeded by assigning a numeric
value to RANDOM.
The values of RANDOM form an intentionally-repeatable pseudo-random sequence;
subshells that reference RANDOM will result in identical pseudo-random values unless
the value of RANDOM is referenced or seeded in the parent shell in between subshell
invocations.
SECONDS <S>
The number of seconds since shell invocation. If this parameter is assigned a value,
then the value returned upon reference will be the value that was assigned plus the
number of seconds since the assignment.
Unlike other special parameters, the type of the SECONDS parameter can be changed
using the typeset command. Only integer and one of the oating point types are
allowed. For example, typeset -F SECONDS causes the value to be reported as
a oating point number. The value is available to microsecond accuracy, although
the shell may show more or fewer digits depending on the use of typeset. See the
documentation for the builtin typeset in Chapter 17 [Shell Builtin Commands],
page 111 for more details.
SHLVL <S> Incremented by one each time a new shell is started.
signals An array containing the names of the signals.
TRY_BLOCK_ERROR <S>
In an always block, indicates whether the preceding list of code caused an error.
The value is 1 to indicate an error, 0 otherwise. It may be reset, clearing the error
condition. See Section 6.3 [Complex Commands], page 10
TTY The name of the tty associated with the shell, if any.
TTYIDLE <S>
The idle time of the tty associated with the shell in seconds or -1 if there is no such
tty.
UID <S> The real user ID of the shell process. If you have sucient privileges, you may
change the user ID of the shell by assigning to this parameter. Also (assuming
sucient privileges), you may start a single command under a dierent user ID by
(UID=uid; command)
USERNAME <S>
The username corresponding to the real user ID of the shell process. If you have
sucient privileges, you may change the username (and also the user ID and group
ID) of the shell by assigning to this parameter. Also (assuming sucient privileges),
you may start a single command under a dierent username (and user ID and group
ID) by (USERNAME=username; command)
VENDOR The vendor, as determined at compile time.
zsh_eval_context <S> <Z> (ZSH_EVAL_CONTEXT <S>)
An array (colon-separated list) indicating the context of shell code that is being run.
Each time a piece of shell code that is stored within the shell is executed a string
is temporarily appended to the array to indicate the type of operation that is being
performed. Read in order the array gives an indication of the stack of operations
being performed with the most immediate context last.
Chapter 15: Parameters 79
Note that the variable does not give information on syntactic context such as
pipelines or subshells. Use $ZSH_SUBSHELL to detect subshells.
The context is one of the following:
cmdarg Code specied by the -c option to the command line that invoked the
shell.
cmdsubst Command substitution using the ... or $(...) construct.
equalsubst
File substitution using the =(...) construct.
eval Code executed by the eval builtin.
evalautofunc
Code executed with the KSH_AUTOLOAD mechanism in order to dene an
autoloaded function.
fc Code from the shell history executed by the -e option to the fc builtin.
file Lines of code being read directly from a le, for example by the source
builtin.
filecode Lines of code being read from a .zwc le instead of directly from the
source le.
globqual Code executed by the e or + glob qualier.
globsort Code executed to order les by the o glob qualier.
insubst File substitution using the <(...) construct.
loadautofunc
Code read directly from a le to dene an autoloaded function.
outsubst File substitution using the >(...) construct.
sched Code executed by the sched builtin.
shfunc A shell function.
stty Code passed to stty by the STTY environment variable. Normally this is
passed directly to the systems stty command, so this value is unlikely
to be seen in practice.
style Code executed as part of a style retrieved by the zstyle builtin from
the zsh/zutil module.
toplevel The highest execution level of a script or interactive shell.
trap Code executed as a trap dened by the trap builtin. Traps dened as
functions have the context shfunc. As traps are asynchronous they may
have a dierent hierarchy from other code.
zpty Code executed by the zpty builtin from the zsh/zpty module.
zregexparse-guard
Code executed as a guard by the zregexparse command from the
zsh/zutil module.
zregexparse-action
Code executed as an action by the zregexparse command from the
zsh/zutil module.
ZSH_NAME Expands to the basename of the command used to invoke this instance of zsh.
Chapter 15: Parameters 80
ZSH_PATCHLEVEL
The revision string for the version number of the ChangeLog le in the zsh distri-
bution. This is most useful in order to keep track of versions of the shell during
development between releases; hence most users should not use it and should instead
rely on $ZSH_VERSION.
zsh_scheduled_events
See Section 22.21 [The zsh/sched Module], page 286.
ZSH_SUBSHELL
Readonly integer. Initially zero, incremented each time the shell forks to create a
subshell for executing code. Hence (print $ZSH_SUBSHELL) and print $(print
$ZSH_SUBSHELL) output 1, while ( (print $ZSH_SUBSHELL) ) outputs 2.
ZSH_VERSION
The version number of the release of zsh.
15.6 Parameters Used By The Shell
The following parameters are used by the shell.
In cases where there are two parameters with an upper- and lowercase form of the same name,
such as path and PATH, the lowercase form is an array and the uppercase form is a scalar with the
elements of the array joined together by colons. These are similar to tied parameters created via
typeset -T. The normal use for the colon-separated form is for exporting to the environment,
while the array form is easier to manipulate within the shell. Note that unsetting either of the
pair will unset the other; they retain their special properties when recreated, and recreating one
of the pair will recreate the other.
ARGV0 If exported, its value is used as the argv[0] of external commands. Usually used
in constructs like ARGV0=emacs nethack.
BAUD The rate in bits per second at which data reaches the terminal. The line editor
will use this value in order to compensate for a slow terminal by delaying updates
to the display until necessary. If the parameter is unset or the value is zero the
compensation mechanism is turned o. The parameter is not set by default.
This parameter may be protably set in some circumstances, e.g. for slow modems
dialing into a communications server, or on a slow wide area network. It should be
set to the baud rate of the slowest part of the link for best performance.
cdpath <S> <Z> (CDPATH <S>)
An array (colon-separated list) of directories specifying the search path for the cd
command.
COLUMNS <S>
The number of columns for this terminal session. Used for printing select lists and
for the line editor.
CORRECT_IGNORE
If set, is treated as a pattern during spelling correction. Any potential correction
that matches the pattern is ignored. For example, if the value is _* then completion
functions (which, by convention, have names beginning with _) will never be oered
as spelling corrections. The pattern does not apply to the correction of le names, as
applied by the CORRECT_ALL option (so with the example just given les beginning
with _ in the current directory would still be completed).
CORRECT_IGNORE_FILE
If set, is treated as a pattern during spelling correction of le names. Any le name
that matches the pattern is never oered as a correction. For example, if the value
Chapter 15: Parameters 81
is .* then dot le names will never be oered as spelling corrections. This is useful
with the CORRECT_ALL option.
DIRSTACKSIZE
The maximum size of the directory stack, by default there is no limit. If the stack
gets larger than this, it will be truncated automatically. This is useful with the
AUTO_PUSHD option.
ENV If the ENV environment variable is set when zsh is invoked as sh or ksh, $ENV is
sourced after the prole scripts. The value of ENV is subjected to parameter expan-
sion, command substitution, and arithmetic expansion before being interpreted as
a pathname. Note that ENV is not used unless zsh is emulating sh or ksh.
FCEDIT The default editor for the fc builtin. If FCEDIT is not set, the parameter EDITOR is
used; if that is not set either, a builtin default, usually vi, is used.
fignore <S> <Z> (FIGNORE <S>)
An array (colon separated list) containing the suxes of les to be ignored during
lename completion. However, if completion only generates les with suxes in this
list, then these les are completed anyway.
fpath <S> <Z> (FPATH <S>)
An array (colon separated list) of directories specifying the search path for function
denitions. This path is searched when a function with the -u attribute is referenced.
If an executable le is found, then it is read and executed in the current environment.
histchars <S>
Three characters used by the shells history and lexical analysis mechanism. The
rst character signals the start of a history expansion (default !). The second
character signals the start of a quick history substitution (default ^). The third
character is the comment character (default #).
The characters must be in the ASCII character set; any attempt to set histchars to
characters with a locale-dependent meaning will be rejected with an error message.
HISTCHARS <S> <Z>
Same as histchars. (Deprecated.)
HISTFILE The le to save the history in when an interactive shell exits. If unset, the history
is not saved.
HISTORY_IGNORE
If set, is treated as a pattern at the time history les are written. Any potential
history entry that matches the pattern is skipped. For example, if the value is fc
* then commands that invoke the interactive history editor are never written to the
history le (compare the HIST_NO_STORE option or the zshaddhistory hook, either
of which would prevent such commands from being added to the interactive history
at all).
HISTSIZE <S>
The maximum number of events stored in the internal history list. If you use the
HIST_EXPIRE_DUPS_FIRST option, setting this value larger than the SAVEHIST size
will give you the dierence as a cushion for saving duplicated history events.
HOME <S> The default argument for the cd command. This is not set automatically by the
shell in sh, ksh or csh emulation, but it is typically present in the environment
anyway, and if it becomes set it has its usual special behaviour.
IFS <S> Internal eld separators (by default space, tab, newline and NUL), that are used to
separate words which result from command or parameter expansion and words read
Chapter 15: Parameters 82
by the read builtin. Any characters from the set space, tab and newline that appear
in the IFS are called IFS white space. One or more IFS white space characters or one
non-IFS white space character together with any adjacent IFS white space character
delimit a eld. If an IFS white space character appears twice consecutively in the
IFS, this character is treated as if it were not an IFS white space character.
If the parameter is unset, the default is used. Note this has a dierent eect from
setting the parameter to an empty string.
KEYBOARD_HACK
This variable denes a character to be removed from the end of the command line
before interpreting it (interactive shells only). It is intended to x the problem
with keys placed annoyingly close to return and replaces the SUNKEYBOARDHACK
option which did this for backquotes only. Should the chosen character be one of
singlequote, doublequote or backquote, there must also be an odd number of them
on the command line for the last one to be removed.
For backward compabitility, if the SUNKEYBOARDHACK option is explicitly set, the
value of KEYBOARD_HACK reverts to backquote. If the option is explicitly unset, this
variable is set to empty.
KEYTIMEOUT
The time the shell waits, in hundredths of seconds, for another key to be pressed
when reading bound multi-character sequences.
LANG <S> This variable determines the locale category for any category not specically selected
via a variable starting with LC_.
LC_ALL <S>
This variable overrides the value of the LANG variable and the value of any of the
other variables starting with LC_.
LC_COLLATE <S>
This variable determines the locale category for character collation information
within ranges in glob brackets and for sorting.
LC_CTYPE <S>
This variable determines the locale category for character handling functions. If the
MULTIBYTE option is in eect this variable or LANG should contain a value that reects
the character set in use, even if it is a single-byte character set, unless only the 7-bit
subset (ASCII) is used. For example, if the character set is ISO-8859-1, a suitable
value might be en_US.iso88591 (certain Linux distributions) or en_US.ISO8859-1
(MacOS).
LC_MESSAGES <S>
This variable determines the language in which messages should be written. Note
that zsh does not use message catalogs.
LC_NUMERIC <S>
This variable aects the decimal point character and thousands separator character
for the formatted input/output functions and string conversion functions. Note that
zsh ignores this setting when parsing oating point mathematical expressions.
LC_TIME <S>
This variable determines the locale category for date and time formatting in prompt
escape sequences.
LINES <S> The number of lines for this terminal session. Used for printing select lists and for
the line editor.
Chapter 15: Parameters 83
LISTMAX In the line editor, the number of matches to list without asking rst. If the value
is negative, the list will be shown if it spans at most as many lines as given by the
absolute value. If set to zero, the shell asks only if the top of the listing would scroll
o the screen.
LOGCHECK The interval in seconds between checks for login/logout activity using the watch
parameter.
MAIL If this parameter is set and mailpath is not set, the shell looks for mail in the
specied le.
MAILCHECK
The interval in seconds between checks for new mail.
mailpath <S> <Z> (MAILPATH <S>)
An array (colon-separated list) of lenames to check for new mail. Each lename
can be followed by a ? and a message that will be printed. The message will
undergo parameter expansion, command substitution and arithmetic expansion with
the variable $_ dened as the name of the le that has changed. The default message
is You have new mail. If an element is a directory instead of a le the shell will
recursively check every le in every subdirectory of the element.
manpath <S> <Z> (MANPATH <S> <Z>)
An array (colon-separated list) whose value is not used by the shell. The manpath
array can be useful, however, since setting it also sets MANPATH, and vice versa.
match
mbegin
mend Arrays set by the shell when the b globbing ag is used in pattern matches. See the
subsection Globbing ags in Section 14.8 [Filename Generation], page 59.
MATCH
MBEGIN
MEND Set by the shell when the m globbing ag is used in pattern matches. See the
subsection Globbing ags in Section 14.8 [Filename Generation], page 59.
module_path <S> <Z> (MODULE_PATH <S>)
An array (colon-separated list) of directories that zmodload searches for dynam-
ically loadable modules. This is initialized to a standard pathname, usually
/usr/local/lib/zsh/$ZSH_VERSION. (The /usr/local/lib part varies from
installation to installation.) For security reasons, any value set in the environment
when the shell is started will be ignored.
These parameters only exist if the installation supports dynamic module loading.
NULLCMD <S>
The command name to assume if a redirection is specied with no command. De-
faults to cat. For sh/ksh behavior, change this to :. For csh-like behavior, unset
this parameter; the shell will print an error message if null commands are entered.
path <S> <Z> (PATH <S>)
An array (colon-separated list) of directories to search for commands. When this
parameter is set, each directory is scanned and all les found are put in a hash table.
POSTEDIT <S>
This string is output whenever the line editor exits. It usually contains termcap
strings to reset the terminal.
Chapter 15: Parameters 84
PROMPT <S> <Z>
PROMPT2 <S> <Z>
PROMPT3 <S> <Z>
PROMPT4 <S> <Z>
Same as PS1, PS2, PS3 and PS4, respectively.
prompt <S> <Z>
Same as PS1.
PROMPT_EOL_MARK
When the PROMPT_CR and PROMPT_SP options are set, the PROMPT_EOL_MARK param-
eter can be used to customize how the end of partial lines are shown. This parameter
undergoes prompt expansion, with the PROMPT_PERCENT option set. If not set, the
default behavior is equivalent to the value %B%S%#%s%b.
PS1 <S> The primary prompt string, printed before a command is read. It undergoes a spe-
cial form of expansion before being displayed; see Chapter 13 [Prompt Expansion],
page 33. The default is %m%# .
PS2 <S> The secondary prompt, printed when the shell needs more information to complete
a command. It is expanded in the same way as PS1. The default is %_> , which
displays any shell constructs or quotation marks which are currently being processed.
PS3 <S> Selection prompt used within a select loop. It is expanded in the same way as
PS1. The default is ?# .
PS4 <S> The execution trace prompt. Default is +%N:%i> , which displays the name of the
current shell structure and the line number within it. In sh or ksh emulation, the
default is + .
psvar <S> <Z> (PSVAR <S>)
An array (colon-separated list) whose elements can be used in PROMPT strings. Set-
ting psvar also sets PSVAR, and vice versa.
READNULLCMD <S>
The command name to assume if a single input redirection is specied with no
command. Defaults to more.
REPORTTIME
If nonnegative, commands whose combined user and system execution times (mea-
sured in seconds) are greater than this value have timing statistics printed for them.
Output is suppressed for commands executed within the line editor, including com-
pletion; commands explicitly marked with the time keyword still cause the summary
to be printed in this case.
REPLY This parameter is reserved by convention to pass string values between shell scripts
and shell builtins in situations where a function call or redirection are impossible or
undesirable. The read builtin and the select complex command may set REPLY,
and lename generation both sets and examines its value when evaluating certain
expressions. Some modules also employ REPLY for similar purposes.
reply As REPLY, but for array values rather than strings.
RPROMPT <S>
RPS1 <S> This prompt is displayed on the right-hand side of the screen when the primary
prompt is being displayed on the left. This does not work if the SINGLE_LINE_ZLE
option is set. It is expanded in the same way as PS1.
Chapter 15: Parameters 85
RPROMPT2 <S>
RPS2 <S> This prompt is displayed on the right-hand side of the screen when the secondary
prompt is being displayed on the left. This does not work if the SINGLE_LINE_ZLE
option is set. It is expanded in the same way as PS2.
SAVEHIST The maximum number of history events to save in the history le.
SPROMPT <S>
The prompt used for spelling correction. The sequence %R expands to the string
which presumably needs spelling correction, and %r expands to the proposed cor-
rection. All other prompt escapes are also allowed.
STTY If this parameter is set in a commands environment, the shell runs the stty com-
mand with the value of this parameter as arguments in order to set up the terminal
before executing the command. The modes apply only to the command, and are
reset when it nishes or is suspended. If the command is suspended and continued
later with the fg or wait builtins it will see the modes specied by STTY, as if it were
not suspended. This (intentionally) does not apply if the command is continued via
kill -CONT. STTY is ignored if the command is run in the background, or if it is
in the environment of the shell but not explicitly assigned to in the input line. This
avoids running stty at every external command by accidentally exporting it. Also
note that STTY should not be used for window size specications; these will not be
local to the command.
TERM <S> The type of terminal in use. This is used when looking up termcap sequences. An
assignment to TERM causes zsh to re-initialize the terminal, even if the value does
not change (e.g., TERM=$TERM). It is necessary to make such an assignment upon
any change to the terminal denition database or terminal type in order for the new
settings to take eect.
TERMINFO <S>
A reference to a compiled description of the terminal, used by the terminfo library
when the system has it; see man page terminfo(5). If set, this causes the shell to
reinitialise the terminal, making the workaround TERM=$TERM unnecessary.
TIMEFMT The format of process time reports with the time keyword. The default is %J %U
user %S system %P cpu %*E total. Recognizes the following escape sequences,
although not all may be available on all systems, and some that are available may
not be useful:
%% A %.
%U CPU seconds spent in user mode.
%S CPU seconds spent in kernel mode.
%E Elapsed time in seconds.
%P The CPU percentage, computed as (100*%U+%S)/%E.
%W Number of times the process was swapped.
%X The average amount in (shared) text space used in kilobytes.
%D The average amount in (unshared) data/stack space used in kilobytes.
%K The total space used (%X+%D) in kilobytes.
%M The maximum memory the process had in use at any time in megabytes.
%F The number of major page faults (page needed to be brought from disk).
Chapter 15: Parameters 86
%R The number of minor page faults.
%I The number of input operations.
%O The number of output operations.
%r The number of socket messages received.
%s The number of socket messages sent.
%k The number of signals received.
%w Number of voluntary context switches (waits).
%c Number of involuntary context switches.
%J The name of this job.
A star may be inserted between the percent sign and ags printing time. This
cause the time to be printed in hh:mm:ss.ttt format (hours and minutes are only
printed if they are not zero).
TMOUT If this parameter is nonzero, the shell will receive an ALRM signal if a command is not
entered within the specied number of seconds after issuing a prompt. If there is a
trap on SIGALRM, it will be executed and a new alarm is scheduled using the value
of the TMOUT parameter after executing the trap. If no trap is set, and the idle time
of the terminal is not less than the value of the TMOUT parameter, zsh terminates.
Otherwise a new alarm is scheduled to TMOUT seconds after the last keypress.
TMPPREFIX
A pathname prex which the shell will use for all temporary les. Note that this
should include an initial part for the le name as well as any directory names. The
default is /tmp/zsh.
watch <S> <Z> (WATCH <S>)
An array (colon-separated list) of login/logout events to report. If it contains the
single word all, then all login/logout events are reported. If it contains the single
word notme, then all events are reported as with all except $USERNAME. An entry
in this list may consist of a username, an @ followed by a remote hostname, and
a % followed by a line (tty). Any or all of these components may be present in an
entry; if a login/logout event matches all of them, it is reported.
WATCHFMT The format of login/logout reports if the watch parameter is set. Default is %n has
%a %l from %m. Recognizes the following escape sequences:
%n The name of the user that logged in/out.
%a The observed action, i.e. "logged on" or "logged o".
%l The line (tty) the user is logged in on.
%M The full hostname of the remote host.
%m The hostname up to the rst .. If only the IP address is available or
the utmp eld contains the name of an X-windows display, the whole
name is printed.
NOTE: The %m and %M escapes will work only if there is a host name
eld in the utmp on your machine. Otherwise they are treated as ordi-
nary strings.
%S (%s) Start (stop) standout mode.
%U (%u) Start (stop) underline mode.
Chapter 15: Parameters 87
%B (%b) Start (stop) boldface mode.
%t
%@ The time, in 12-hour, am/pm format.
%T The time, in 24-hour format.
%w The date in day-dd format.
%W The date in mm/dd/yy format.
%D The date in yy-mm-dd format.
%(x:true-text:false-text)
Species a ternary expression. The character following the x is arbi-
trary; the same character is used to separate the text for the "true"
result from that for the "false" result. Both the separator and the right
parenthesis may be escaped with a backslash. Ternary expressions may
be nested.
The test character x may be any one of l, n, m or M, which indi-
cate a true result if the corresponding escape sequence would return
a non-empty value; or it may be a, which indicates a true result if
the watched user has logged in, or false if he has logged out. Other
characters evaluate to neither true nor false; the entire expression is
omitted in this case.
If the result is true, then the true-text is formatted according to the
rules above and printed, and the false-text is skipped. If false, the
true-text is skipped and the false-text is formatted and printed. Either
or both of the branches may be empty, but both separators must be
present in any case.
WORDCHARS <S>
A list of non-alphanumeric characters considered part of a word by the line editor.
ZBEEP If set, this gives a string of characters, which can use all the same codes as the
bindkey command as described in Section 22.29 [The zsh/zle Module], page 301,
that will be output to the terminal instead of beeping. This may have a visible
instead of an audible eect; for example, the string \e[?5h\e[?5l on a vt100
or xterm will have the eect of ashing reverse video on and o (if you usually
use reverse video, you should use the string \e[?5l\e[?5h instead). This takes
precedence over the NOBEEP option.
ZDOTDIR The directory to search for shell startup les (.zshrc, etc), if not $HOME.
ZLE_LINE_ABORTED
This parameter is set by the line editor when an error occurs. It contains the line that
was being edited at the point of the error. print -zr -- $ZLE_LINE_ABORTED can
be used to recover the line. Only the most recent line of this kind is remembered.
ZLE_REMOVE_SUFFIX_CHARS
ZLE_SPACE_SUFFIX_CHARS
These parameters are used by the line editor. In certain circumstances suxes (typ-
ically space or slash) added by the completion system will be removed automatically,
either because the next editing command was not an insertable character, or because
the character was marked as requiring the sux to be removed.
These variables can contain the sets of characters that will cause the sux to be
removed. If ZLE_REMOVE_SUFFIX_CHARS is set, those characters will cause the sux
Chapter 16: Options 88
to be removed; if ZLE_SPACE_SUFFIX_CHARS is set, those characters will cause the
sux to be removed and replaced by a space.
If ZLE_REMOVE_SUFFIX_CHARS is not set, the default behaviour is equivalent to:
ZLE_REMOVE_SUFFIX_CHARS=$ \t\n;&|
If ZLE_REMOVE_SUFFIX_CHARS is set but is empty, no characters have this behaviour.
ZLE_SPACE_SUFFIX_CHARS takes precedence, so that the following:
ZLE_SPACE_SUFFIX_CHARS=$&|
causes the characters & and | to remove the sux but to replace it with a space.
To illustrate the dierence, suppose that the option AUTO_REMOVE_SLASH is in eect
and the directory DIR has just been completed, with an appended /, following which
the user types &. The default result is DIR&. With ZLE_REMOVE_SUFFIX_CHARS
set but without including & the result is DIR/&. With ZLE_SPACE_SUFFIX_CHARS
set to include & the result is DIR &.
Note that certain completions may provide their own sux removal or replacement
behaviour which overrides the values described here. See the completion system
documentation in Chapter 20 [Completion System], page 191.
ZLE_RPROMPT_INDENT <S>
If set, used to give the indentation between the right hand side of the right prompt
in the line editor as given by RPS1 or RPROMPT and the right hand side of the screen.
If not set, the value 1 is used.
Typically this will be used to set the value to 0 so that the prompt appears ush
with the right hand side of the screen. This is not the default as many terminals
do not handle this correctly, in particular when the prompt appears at the extreme
bottom right of the screen. Recent virtual terminals are more likely to handle this
case correctly. Some experimentation is necessary.
16 Options
16.1 Specifying Options
Options are primarily referred to by name. These names are case insensitive and underscores
are ignored. For example, allexport is equivalent to A__lleXP_ort.
The sense of an option name may be inverted by preceding it with no, so setopt No_Beep
is equivalent to unsetopt beep. This inversion can only be done once, so nonobeep is not a
synonym for beep. Similarly, tify is not a synonym for nonotify (the inversion of notify).
Some options also have one or more single letter names. There are two sets of single let-
ter options: one used by default, and another used to emulate sh/ksh (used when the
SH_OPTION_LETTERS option is set). The single letter options can be used on the shell com-
mand line, or with the set, setopt and unsetopt builtins, as normal Unix options preceded by
-.
The sense of the single letter options may be inverted by using + instead of -. Some of the
single letter option names refer to an option being o, in which case the inversion of that name
refers to the option being on. For example, +n is the short name of exec, and -n is the short
name of its inversion, noexec.
In strings of single letter options supplied to the shell at startup, trailing whitespace will be
ignored; for example the string -f will be treated just as -f, but the string -f i is an
error. This is because many systems which implement the #! mechanism for calling scripts do
not strip trailing whitespace.
Chapter 16: Options 89
16.2 Description of Options
In the following list, options set by default in all emulations are marked <D>; those set by
default only in csh, ksh, sh, or zsh emulations are marked <C>, <K>, <S>, <Z> as appropriate.
When listing options (by setopt, unsetopt, set -o or set +o), those turned on by default
appear in the list prexed with no. Hence (unless KSH_OPTION_PRINT is set), setopt shows
all options whose settings are changed from the default.
16.2.1 Changing Directories
AUTO_CD (-J)
If a command is issued that cant be executed as a normal command, and the
command is the name of a directory, perform the cd command to that directory.
AUTO_PUSHD (-N)
Make cd push the old directory onto the directory stack.
CDABLE_VARS (-T)
If the argument to a cd command (or an implied cd with the AUTO_CD option set)
is not a directory, and does not begin with a slash, try to expand the expression as
if it were preceded by a ~ (see Section 14.7 [Filename Expansion], page 57).
CHASE_DOTS
When changing to a directory containing a path segment .. which would otherwise
be treated as canceling the previous segment in the path (in other words, foo/..
would be removed from the path, or if .. is the rst part of the path, the last part
of the current working directory would be removed), instead resolve the path to the
physical directory. This option is overridden by CHASE_LINKS.
For example, suppose /foo/bar is a link to the directory /alt/rod. Without this
option set, cd /foo/bar/.. changes to /foo; with it set, it changes to /alt. The
same applies if the current directory is /foo/bar and cd .. is used. Note that all
other symbolic links in the path will also be resolved.
CHASE_LINKS (-w)
Resolve symbolic links to their true values when changing directory. This also has
the eect of CHASE_DOTS, i.e. a .. path segment will be treated as referring to the
physical parent, even if the preceding path segment is a symbolic link.
POSIX_CD Modies the behaviour of cd, chdir and pushd commands to make them more com-
patible with the POSIX standard. The behaviour with the option unset is described
in the documentation for the cd builtin in Chapter 17 [Shell Builtin Commands],
page 111. If the option is set, the shell does not test for directories beneath the local
directory (.) until after all directories in cdpath have been tested.
Also, if the option is set, the conditions under which the shell prints the new directory
after changing to it are modied. It is no longer restricted to interactive shells
(although printing of the directory stack with pushd is still limited to interactive
shells); and any use of a component of CDPATH, including a . but excluding an empty
component that is otherwise treated as ., causes the directory to be printed.
PUSHD_IGNORE_DUPS
Dont push multiple copies of the same directory onto the directory stack.
PUSHD_MINUS
Exchanges the meanings of + and - when used with a number to specify a directory
in the stack.
PUSHD_SILENT (-E)
Do not print the directory stack after pushd or popd.
Chapter 16: Options 90
PUSHD_TO_HOME (-D)
Have pushd with no arguments act like pushd $HOME.
16.2.2 Completion
ALWAYS_LAST_PROMPT <D>
If unset, key functions that list completions try to return to the last prompt if given
a numeric argument. If set these functions try to return to the last prompt if given
no numeric argument.
ALWAYS_TO_END
If a completion is performed with the cursor within a word, and a full completion is
inserted, the cursor is moved to the end of the word. That is, the cursor is moved
to the end of the word if either a single match is inserted or menu completion is
performed.
AUTO_LIST (-9) <D>
Automatically list choices on an ambiguous completion.
AUTO_MENU <D>
Automatically use menu completion after the second consecutive request for com-
pletion, for example by pressing the tab key repeatedly. This option is overridden
by MENU_COMPLETE.
AUTO_NAME_DIRS
Any parameter that is set to the absolute name of a directory immediately becomes a
name for that directory, that will be used by the %~ and related prompt sequences,
and will be available when completion is performed on a word starting with ~.
(Otherwise, the parameter must be used in the form ~param rst.)
AUTO_PARAM_KEYS <D>
If a parameter name was completed and a following character (normally a space)
automatically inserted, and the next character typed is one of those that have to
come directly after the name (like }, :, etc.), the automatically added character is
deleted, so that the character typed comes immediately after the parameter name.
Completion in a brace expansion is aected similarly: the added character is a ,,
which will be removed if } is typed next.
AUTO_PARAM_SLASH <D>
If a parameter is completed whose content is the name of a directory, then add a
trailing slash instead of a space.
AUTO_REMOVE_SLASH <D>
When the last character resulting from a completion is a slash and the next character
typed is a word delimiter, a slash, or a character that ends a command (such as a
semicolon or an ampersand), remove the slash.
BASH_AUTO_LIST
On an ambiguous completion, automatically list choices when the completion func-
tion is called twice in succession. This takes precedence over AUTO_LIST. The setting
of LIST_AMBIGUOUS is respected. If AUTO_MENU is set, the menu behaviour will then
start with the third press. Note that this will not work with MENU_COMPLETE, since
repeated completion calls immediately cycle through the list in that case.
COMPLETE_ALIASES
Prevents aliases on the command line from being internally substituted before com-
pletion is attempted. The eect is to make the alias a distinct command for com-
pletion purposes.
Chapter 16: Options 91
COMPLETE_IN_WORD
If unset, the cursor is set to the end of the word if completion is started. Otherwise
it stays there and completion is done from both ends.
GLOB_COMPLETE
When the current word has a glob pattern, do not insert all the words resulting from
the expansion but generate matches as for completion and cycle through them like
MENU_COMPLETE. The matches are generated as if a * was added to the end of the
word, or inserted at the cursor when COMPLETE_IN_WORD is set. This actually uses
pattern matching, not globbing, so it works not only for les but for any completion,
such as options, user names, etc.
Note that when the pattern matcher is used, matching control (for example, case-
insensitive or anchored matching) cannot be used. This limitation only applies when
the current word contains a pattern; simply turning on the GLOB_COMPLETE option
does not have this eect.
HASH_LIST_ALL <D>
Whenever a command completion or spelling correction is attempted, make sure the
entire command path is hashed rst. This makes the rst completion slower but
avoids false reports of spelling errors.
LIST_AMBIGUOUS <D>
This option works when AUTO_LIST or BASH_AUTO_LIST is also set. If there is an
unambiguous prex to insert on the command line, that is done without a completion
list being displayed; in other words, auto-listing behaviour only takes place when
nothing would be inserted. In the case of BASH_AUTO_LIST, this means that the list
will be delayed to the third call of the function.
LIST_BEEP <D>
Beep on an ambiguous completion. More accurately, this forces the completion
widgets to return status 1 on an ambiguous completion, which causes the shell to
beep if the option BEEP is also set; this may be modied if completion is called from
a user-dened widget.
LIST_PACKED
Try to make the completion list smaller (occupying less lines) by printing the matches
in columns with dierent widths.
LIST_ROWS_FIRST
Lay out the matches in completion lists sorted horizontally, that is, the second match
is to the right of the rst one, not under it as usual.
LIST_TYPES (-X) <D>
When listing les that are possible completions, show the type of each le with a
trailing identifying mark.
MENU_COMPLETE (-Y)
On an ambiguous completion, instead of listing possibilities or beeping, insert the
rst match immediately. Then when completion is requested again, remove the rst
match and insert the second match, etc. When there are no more matches, go back
to the rst one again. reverse-menu-complete may be used to loop through the
list in the other direction. This option overrides AUTO_MENU.
REC_EXACT (-S)
In completion, recognize exact matches even if they are ambiguous.
Chapter 16: Options 92
16.2.3 Expansion and Globbing
BAD_PATTERN (+2) <C> <Z>
If a pattern for lename generation is badly formed, print an error message. (If this
option is unset, the pattern will be left unchanged.)
BARE_GLOB_QUAL <Z>
In a glob pattern, treat a trailing set of parentheses as a qualier list, if it contains
no |, ( or (if special) ~ characters. See Section 14.8 [Filename Generation],
page 59.
BRACE_CCL
Expand expressions in braces which would not otherwise undergo brace expansion
to a lexically ordered list of all the characters. See Section 14.6 [Brace Expansion],
page 56.
CASE_GLOB <D>
Make globbing (lename generation) sensitive to case. Note that other uses of
patterns are always sensitive to case. If the option is unset, the presence of any
character which is special to lename generation will cause case-insensitive matching.
For example, cvs(/) can match the directory CVS owing to the presence of the
globbing ag (unless the option BARE_GLOB_QUAL is unset).
CASE_MATCH <D>
Make regular expressions using the zsh/regex module (including matches with =~)
sensitive to case.
CSH_NULL_GLOB <C>
If a pattern for lename generation has no matches, delete the pattern from the
argument list; do not report an error unless all the patterns in a command have no
matches. Overrides NOMATCH.
EQUALS <Z>
Perform = lename expansion. (See Section 14.7 [Filename Expansion], page 57.)
EXTENDED_GLOB
Treat the #, ~ and ^ characters as part of patterns for lename generation, etc.
(An initial unquoted ~ always produces named directory expansion.)
FORCE_FLOAT
Constants in arithmetic evaluation will be treated as oating point even without
the use of a decimal point. Integers in any base will be converted.
GLOB (+F, ksh: +f) <D>
Perform lename generation (globbing). (See Section 14.8 [Filename Generation],
page 59.)
GLOB_ASSIGN <C>
If this option is set, lename generation (globbing) is performed on the right hand
side of scalar parameter assignments of the form name=pattern (e.g. foo=*). If
the result has more than one word the parameter will become an array with those
words as arguments. This option is provided for backwards compatibility only:
globbing is always performed on the right hand side of array assignments of the
form name=(value) (e.g. foo=(*)) and this form is recommended for clarity;
with this option set, it is not possible to predict whether the result will be an array
or a scalar.
GLOB_DOTS (-4)
Do not require a leading . in a lename to be matched explicitly.
Chapter 16: Options 93
GLOB_SUBST <C> <K> <S>
Treat any characters resulting from parameter expansion as being eligible for le
expansion and lename generation, and any characters resulting from command sub-
stitution as being eligible for lename generation. Braces (and commas in between)
do not become eligible for expansion.
HIST_SUBST_PATTERN
Substitutions using the :s and :& history modiers are performed with pattern
matching instead of string matching. This occurs wherever history modiers are
valid, including glob qualiers and parameters. See Section 14.1.4 [Modiers],
page 40.
IGNORE_BRACES (-I) <S>
Do not perform brace expansion. For historical reasons this also includes the eect
of the IGNORE_CLOSE_BRACES option.
IGNORE_CLOSE_BRACES
When neither this option nor IGNORE_BRACES is set, a sole close brace character
} is syntactically signicant at any point on a command line. This has the eect
that no semicolon or newline is necessary before the brace terminating a function
or current shell construct. When either option is set, a closing brace is syntactically
signicant only in command position. Unlike IGNORE_BRACES, this option does not
disable brace expansion.
For example, with both options unset a function may be dened in the following
fashion:
args() { echo $# }
while if either option is set, this does not work and something equivalent to the
following is required:
args() { echo $#; }
KSH_GLOB <K>
In pattern matching, the interpretation of parentheses is aected by a preceding @,
*, +, ? or !. See Section 14.8 [Filename Generation], page 59.
MAGIC_EQUAL_SUBST
All unquoted arguments of the form anything=expression appearing after the com-
mand name have lename expansion (that is, where expression has a leading ~
or =) performed on expression as if it were a parameter assignment. The argu-
ment is not otherwise treated specially; it is passed to the command as a single
argument, and not used as an actual parameter assignment. For example, in echo
foo=~/bar:~/rod, both occurrences of ~ would be replaced. Note that this happens
anyway with typeset and similar statements.
This option respects the setting of the KSH_TYPESET option. In other words, if both
options are in eect, arguments looking like assignments will not undergo word
splitting.
MARK_DIRS (-8, ksh: -X)
Append a trailing / to all directory names resulting from lename generation (glob-
bing).
MULTIBYTE <C> <K> <Z>
Respect multibyte characters when found in strings. When this option is set, strings
are examined using the system library to determine how many bytes form a char-
acter, depending on the current locale. This aects the way characters are counted
in pattern matching, parameter values and various delimiters.
Chapter 16: Options 94
The option is on by default if the shell was compiled with MULTIBYTE_SUPPORT
except in sh emulation; otherwise it is o by default and has no eect if turned on.
The mode is o in sh emulation for compatibility but for interactive use may need
to be turned on if the terminal interprets multibyte characters.
If the option is o a single byte is always treated as a single character. This setting
is designed purely for examining strings known to contain raw bytes or other values
that may not be characters in the current locale. It is not necessary to unset the
option merely because the character set for the current locale does not contain
multibyte characters.
The option does not aect the shells editor, which always uses the locale to de-
termine multibyte characters. This is because the character set displayed by the
terminal emulator is independent of shell settings.
NOMATCH (+3) <C> <Z>
If a pattern for lename generation has no matches, print an error, instead of leaving
it unchanged in the argument list. This also applies to le expansion of an initial
~ or =.
NULL_GLOB (-G)
If a pattern for lename generation has no matches, delete the pattern from the
argument list instead of reporting an error. Overrides NOMATCH.
NUMERIC_GLOB_SORT
If numeric lenames are matched by a lename generation pattern, sort the lenames
numerically rather than lexicographically.
RC_EXPAND_PARAM (-P)
Array expansions of the form foo${xx}bar, where the parameter xx is set to (a
b c), are substituted with fooabar foobbar foocbar instead of the default fooa b
cbar. Note that an empty array will therefore cause all arguments to be removed.
REMATCH_PCRE <Z>
If set, regular expression matching with the =~ operator will use Perl-Compatible
Regular Expressions from the PCRE library, if available. If not set, regular expres-
sions will use the extended regexp syntax provided by the system libraries.
SH_GLOB <K> <S>
Disables the special meaning of (, |, ) and < for globbing the result of param-
eter and command substitutions, and in some other places where the shell accepts
patterns. If SH_GLOB is set but KSH_GLOB is not, the shell allows the interpretation
of subshell expressions enclosed in parentheses in some cases where there is no space
before the opening parenthesis, e.g. !(true) is interpreted as if there were a space
after the !. This option is set by default if zsh is invoked as sh or ksh.
UNSET (+u, ksh: +u) <K> <S> <Z>
Treat unset parameters as if they were empty when substituting. Otherwise they
are treated as an error.
WARN_CREATE_GLOBAL
Print a warning message when a global parameter is created in a function by an
assignment. This often indicates that a parameter has not been declared local when
it should have been. Parameters explicitly declared global from within a function
using typeset -g do not cause a warning. Note that there is no warning when a
local parameter is assigned to in a nested function, which may also indicate an error.
Chapter 16: Options 95
16.2.4 History
APPEND_HISTORY <D>
If this is set, zsh sessions will append their history list to the history le, rather
than replace it. Thus, multiple parallel zsh sessions will all have the new entries
from their history lists added to the history le, in the order that they exit. The
le will still be periodically re-written to trim it when the number of lines grows
20% beyond the value specied by $SAVEHIST (see also the HIST SAVE BY COPY
option).
BANG_HIST (+K) <C> <Z>
Perform textual history expansion, csh-style, treating the character ! specially.
EXTENDED_HISTORY <C>
Save each commands beginning timestamp (in seconds since the epoch) and the
duration (in seconds) to the history le. The format of this prexed data is:
: <beginning time>:<elapsed seconds>;<command>.
HIST_ALLOW_CLOBBER
Add | to output redirections in the history. This allows history references to
clobber les even when CLOBBER is unset.
HIST_BEEP <D>
Beep when an attempt is made to access a history entry which isnt there.
HIST_EXPIRE_DUPS_FIRST
If the internal history needs to be trimmed to add the current command line, setting
this option will cause the oldest history event that has a duplicate to be lost before
losing a unique event from the list. You should be sure to set the value of HISTSIZE
to a larger number than SAVEHIST in order to give you some room for the duplicated
events, otherwise this option will behave just like HIST_IGNORE_ALL_DUPS once the
history lls up with unique events.
HIST_FCNTL_LOCK
When writing out the history le, by default zsh uses ad-hoc le locking to avoid
known problems with locking on some operating systems. With this option locking
is done by means of the systems fcntl call, where this method is available. On
recent operating systems this may provide better performance, in particular avoiding
history corruption when les are stored on NFS.
HIST_FIND_NO_DUPS
When searching for history entries in the line editor, do not display duplicates of a
line previously found, even if the duplicates are not contiguous.
HIST_IGNORE_ALL_DUPS
If a new command line being added to the history list duplicates an older one, the
older command is removed from the list (even if it is not the previous event).
HIST_IGNORE_DUPS (-h)
Do not enter command lines into the history list if they are duplicates of the previous
event.
HIST_IGNORE_SPACE (-g)
Remove command lines from the history list when the rst character on the line is
a space, or when one of the expanded aliases contains a leading space. Only normal
aliases (not global or sux aliases) have this behaviour. Note that the command
lingers in the internal history until the next command is entered before it vanishes,
allowing you to briey reuse or edit the line. If you want to make it vanish right
away without entering another command, type a space and press return.
Chapter 16: Options 96
HIST_LEX_WORDS
By default, shell history that is read in from les is split into words on all white space.
This means that arguments with quoted whitespace are not correctly handled, with
the consequence that references to words in history lines that have been read from a
le may be inaccurate. When this option is set, words read in from a history le are
divided up in a similar fashion to normal shell command line handling. Although
this produces more accurately delimited words, if the size of the history le is large
this can be slow. Trial and error is necessary to decide.
HIST_NO_FUNCTIONS
Remove function denitions from the history list. Note that the function lingers in
the internal history until the next command is entered before it vanishes, allowing
you to briey reuse or edit the denition.
HIST_NO_STORE
Remove the history (fc -l) command from the history list when invoked. Note
that the command lingers in the internal history until the next command is entered
before it vanishes, allowing you to briey reuse or edit the line.
HIST_REDUCE_BLANKS
Remove superuous blanks from each command line being added to the history list.
HIST_SAVE_BY_COPY <D>
When the history le is re-written, we normally write out a copy of the le named
$HISTFILE.new and then rename it over the old one. However, if this option is
unset, we instead truncate the old history le and write out the new version in-
place. If one of the history-appending options is enabled, this option only has an
eect when the enlarged history le needs to be re-written to trim it down to size.
Disable this only if you have special needs, as doing so makes it possible to lose
history entries if zsh gets interrupted during the save.
When writing out a copy of the history le, zsh preserves the old les permissions
and group information, but will refuse to write out a new le if it would change the
history les owner.
HIST_SAVE_NO_DUPS
When writing out the history le, older commands that duplicate newer ones are
omitted.
HIST_VERIFY
Whenever the user enters a line with history expansion, dont execute the line di-
rectly; instead, perform history expansion and reload the line into the editing buer.
INC_APPEND_HISTORY
This options works like APPEND_HISTORY except that new history lines are added
to the $HISTFILE incrementally (as soon as they are entered), rather than waiting
until the shell exits. The le will still be periodically re-written to trim it when the
number of lines grows 20% beyond the value specied by $SAVEHIST (see also the
HIST SAVE BY COPY option).
INC_APPEND_HISTORY_TIME
This option is a variant of INC_APPEND_HISTORY in which, where possible, the history
entry is written out to the le after the command is nished, so that the time
taken by the command is recorded correctly in the history le in EXTENDED_HISTORY
format. This means that the history entry will not be available immediately from
other instances of the shell that are using the same history le.
This option is only useful if INC_APPEND_HISTORY and SHARE_HISTORY are turned
o. The three options should be considered mutually exclusive.
Chapter 16: Options 97
SHARE_HISTORY <K>
This option both imports new commands from the history le, and also causes your
typed commands to be appended to the history le (the latter is like specifying
INC_APPEND_HISTORY, which should be turned o if this option is in eect). The
history lines are also output with timestamps ala EXTENDED_HISTORY (which makes
it easier to nd the spot where we left o reading the le after it gets re-written).
By default, history movement commands visit the imported lines as well as the local
lines, but you can toggle this on and o with the set-local-history zle binding. It is
also possible to create a zle widget that will make some commands ignore imported
commands, and some include them.
If you nd that you want more control over when commands get im-
ported, you may wish to turn SHARE_HISTORY o, INC_APPEND_HISTORY or
INC_APPEND_HISTORY_TIME (see above) on, and then manually import commands
whenever you need them using fc -RI.
16.2.5 Initialisation
ALL_EXPORT (-a, ksh: -a)
All parameters subsequently dened are automatically exported.
GLOBAL_EXPORT (<Z>)
If this option is set, passing the -x ag to the builtins declare, float, integer,
readonly and typeset (but not local) will also set the -g ag; hence parameters
exported to the environment will not be made local to the enclosing function, unless
they were already or the ag +g is given explicitly. If the option is unset, exported
parameters will be made local in just the same way as any other parameter.
This option is set by default for backward compatibility; it is not recommended that
its behaviour be relied upon. Note that the builtin export always sets both the -x
and -g ags, and hence its eect extends beyond the scope of the enclosing function;
this is the most portable way to achieve this behaviour.
GLOBAL_RCS (-d) <D>
If this option is unset, the startup les /etc/zprofile, /etc/zshrc, /etc/zlogin
and /etc/zlogout will not be run. It can be disabled and re-enabled at any time,
including inside local startup les (.zshrc, etc.).
RCS (+f) <D>
After /etc/zshenv is sourced on startup, source the .zshenv, /etc/zprofile,
.zprofile, /etc/zshrc, .zshrc, /etc/zlogin, .zlogin, and .zlogout les, as
described in Chapter 5 [Files], page 8. If this option is unset, the /etc/zshenv le
is still sourced, but any of the others will not be; it can be set at any time to prevent
the remaining startup les after the currently executing one from being sourced.
16.2.6 Input/Output
ALIASES <D>
Expand aliases.
CLOBBER (+C, ksh: +C) <D>
Allows > redirection to truncate existing les, and >> to create les. Otherwise
>! or >| must be used to truncate a le, and >>! or >>| to create a le.
CORRECT (-0)
Try to correct the spelling of commands. Note that, when the HASH_LIST_ALL
option is not set or when some directories in the path are not readable, this may
falsely report spelling errors the rst time some commands are used.
Chapter 16: Options 98
The shell variable CORRECT_IGNORE may be set to a pattern to match words that
will never be oered as corrections.
CORRECT_ALL (-O)
Try to correct the spelling of all arguments in a line.
The shell variable CORRECT_IGNORE_FILE may be set to a pattern to match le
names that will never be oered as corrections.
DVORAK Use the Dvorak keyboard instead of the standard qwerty keyboard as a basis for
examining spelling mistakes for the CORRECT and CORRECT_ALL options and the
spell-word editor command.
FLOW_CONTROL <D>
If this option is unset, output ow control via start/stop characters (usually assigned
to ^S/^Q) is disabled in the shells editor.
IGNORE_EOF (-7)
Do not exit on end-of-le. Require the use of exit or logout instead. However, ten
consecutive EOFs will cause the shell to exit anyway, to avoid the shell hanging if
its tty goes away.
Also, if this option is set and the Zsh Line Editor is used, widgets implemented by
shell functions can be bound to EOF (normally Control-D) without printing the
normal warning message. This works only for normal widgets, not for completion
widgets.
INTERACTIVE_COMMENTS (-k) <K> <S>
Allow comments even in interactive shells.
HASH_CMDS <D>
Note the location of each command the rst time it is executed. Subsequent invo-
cations of the same command will use the saved location, avoiding a path search. If
this option is unset, no path hashing is done at all. However, when CORRECT is set,
commands whose names do not appear in the functions or aliases hash tables are
hashed in order to avoid reporting them as spelling errors.
HASH_DIRS <D>
Whenever a command name is hashed, hash the directory containing it, as well as
all directories that occur earlier in the path. Has no eect if neither HASH_CMDS nor
CORRECT is set.
HASH_EXECUTABLES_ONLY
When hashing commands because of HASH_CMDS, check that the le to be hashed
is actually an executable. This option is unset by default as if the path contains
a large number of commands, or consists of many remote les, the additional tests
can take a long time. Trial and error is needed to show if this option is benecial.
MAIL_WARNING (-U)
Print a warning message if a mail le has been accessed since the shell last checked.
PATH_DIRS (-Q)
Perform a path search even on command names with slashes in them. Thus if
/usr/local/bin is in the users path, and he or she types X11/xinit, the com-
mand /usr/local/bin/X11/xinit will be executed (assuming it exists). Com-
mands explicitly beginning with /, ./ or ../ are not subject to the path search.
This also applies to the . and source builtins.
Note that subdirectories of the current directory are always searched for executables
specied in this form. This takes place before any search indicated by this option,
Chapter 16: Options 99
and regardless of whether . or the current directory appear in the command search
path.
PATH_SCRIPT <K> <S>
If this option is not set, a script passed as the rst non-option argument to the shell
must contain the name of the le to open. If this option is set, and the script does
not specify a directory path, the script is looked for rst in the current directory,
then in the command path. See Chapter 4 [Invocation], page 6.
PRINT_EIGHT_BIT
Print eight bit characters literally in completion lists, etc. This option is not nec-
essary if your system correctly returns the printability of eight bit characters (see
man page ctype(3)).
PRINT_EXIT_VALUE (-1)
Print the exit value of programs with non-zero exit status. This is only available at
the command line in interactive shells.
RC_QUOTES
Allow the character sequence to signify a single quote within singly quoted
strings. Note this does not apply in quoted strings using the format $..., where a
backslashed single quote can be used.
RM_STAR_SILENT (-H) <K> <S>
Do not query the user before executing rm * or rm path/*.
RM_STAR_WAIT
If querying the user before executing rm * or rm path/*, rst wait ten seconds
and ignore anything typed in that time. This avoids the problem of reexively
answering yes to the query when one didnt really mean it. The wait and query
can always be avoided by expanding the * in ZLE (with tab).
SHORT_LOOPS <C> <Z>
Allow the short forms of for, repeat, select, if, and function constructs.
SUN_KEYBOARD_HACK (-L)
If a line ends with a backquote, and there are an odd number of backquotes on
the line, ignore the trailing backquote. This is useful on some keyboards where the
return key is too small, and the backquote key lies annoyingly close to it. As an
alternative the variable KEYBOARD_HACK lets you choose the character to be removed.
16.2.7 Job Control
AUTO_CONTINUE
With this option set, stopped jobs that are removed from the job table with the
disown builtin command are automatically sent a CONT signal to make them running.
AUTO_RESUME (-W)
Treat single word simple commands without redirection as candidates for resumption
of an existing job.
BG_NICE (-6) <C> <Z>
Run all background jobs at a lower priority. This option is set by default.
CHECK_JOBS <Z>
Report the status of background and suspended jobs before exiting a shell with job
control; a second attempt to exit the shell will succeed. NO_CHECK_JOBS is best used
only in combination with NO_HUP, else such jobs will be killed automatically.
Chapter 16: Options 100
The check is omitted if the commands run from the previous command line included
a jobs command, since it is assumed the user is aware that there are background
or suspended jobs. A jobs command run from one of the hook functions dened
in the section Special Functions in Chapter 9 [Functions], page 20 is not counted for
this purpose.
HUP <Z> Send the HUP signal to running jobs when the shell exits.
LONG_LIST_JOBS (-R)
List jobs in the long format by default.
MONITOR (-m, ksh: -m)
Allow job control. Set by default in interactive shells.
NOTIFY (-5, ksh: -b) <Z>
Report the status of background jobs immediately, rather than waiting until just
before printing a prompt.
POSIX_JOBS <K> <S>
This option makes job control more compliant with the POSIX standard.
When the option is not set, the MONITOR option is unset on entry to subshells, so
that job control is no longer active. When the option is set, the MONITOR option and
job control remain active in the subshell, but note that the subshell has no access
to jobs in the parent shell.
When the option is not set, jobs put in the background or foreground with bg or fg
are displayed with the same information that would be reported by jobs. When the
option is set, only the text is printed. The output from jobs itself is not aected
by the option.
When the option is not set, job information from the parent shell is saved for output
within a subshell (for example, within a pipeline). When the option is set, the output
of jobs is empty until a job is started within the subshell.
When the option is set, it becomes possible to use the wait builtin to wait for the
last job started in the background (as given by $!) even if that job has already
exited. This works even if the option is turned on temporarily around the use of
the wait builtin.
16.2.8 Prompting
PROMPT_BANG <K>
If set, ! is treated specially in prompt expansion. See Chapter 13 [Prompt Expan-
sion], page 33.
PROMPT_CR (+V) <D>
Print a carriage return just before printing a prompt in the line editor. This is on
by default as multi-line editing is only possible if the editor knows where the start
of the line appears.
PROMPT_SP <D>
Attempt to preserve a partial line (i.e. a line that did not end with a newline)
that would otherwise be covered up by the command prompt due to the PROMPT_CR
option. This works by outputting some cursor-control characters, including a series
of spaces, that should make the terminal wrap to the next line when a partial line
is present (note that this is only successful if your terminal has automatic margins,
which is typical).
When a partial line is preserved, by default you will see an inverse+bold character
at the end of the partial line: a "%" for a normal user or a "#" for root. If set, the
Chapter 16: Options 101
shell parameter PROMPT_EOL_MARK can be used to customize how the end of partial
lines are shown.
NOTE: if the PROMPT_CR option is not set, enabling this option will have no eect.
This option is on by default.
PROMPT_PERCENT <C> <Z>
If set, % is treated specially in prompt expansion. See Chapter 13 [Prompt Expan-
sion], page 33.
PROMPT_SUBST <K> <S>
If set, parameter expansion, command substitution and arithmetic expansion are
performed in prompts. Substitutions within prompts do not aect the command
status.
TRANSIENT_RPROMPT
Remove any right prompt from display when accepting a command line. This may
be useful with terminals with other cut/paste methods.
16.2.9 Scripts and Functions
C_BASES Output hexadecimal numbers in the standard C format, for example 0xFF instead
of the usual 16#FF. If the option OCTAL_ZEROES is also set (it is not by default),
octal numbers will be treated similarly and hence appear as 077 instead of 8#77.
This option has no eect on the choice of the output base, nor on the output of bases
other than hexadecimal and octal. Note that these formats will be understood on
input irrespective of the setting of C_BASES.
C_PRECEDENCES
This alters the precedence of arithmetic operators to be more like C and other
programming languages; Arithmetic Evaluation has an explicit list.
DEBUG_BEFORE_CMD
Run the DEBUG trap before each command; otherwise it is run after each command.
Setting this option mimics the behaviour of ksh 93; with the option unset the be-
haviour is that of ksh 88.
ERR_EXIT (-e, ksh: -e)
If a command has a non-zero exit status, execute the ZERR trap, if set, and exit.
This is disabled while running initialization scripts.
The behaviour is also disabled inside DEBUG traps. In this case the option is handled
specially: it is unset on entry to the trap. If the option DEBUG_BEFORE_CMD is set,
as it is by default, and the option ERR_EXIT is found to have been set on exit, then
the command for which the DEBUG trap is being executed is skipped. The option is
restored after the trap exits.
Exiting due to ERR_EXIT has certain interactions with asynchronous jobs noted in
Chapter 10 [Jobs & Signals], page 25.
ERR_RETURN
If a command has a non-zero exit status, return immediately from the enclosing
function. The logic is identical to that for ERR_EXIT, except that an implicit return
statement is executed instead of an exit. This will trigger an exit at the outermost
level of a non-interactive script.
EVAL_LINENO <Z>
If set, line numbers of expressions evaluated using the builtin eval are tracked
separately of the enclosing environment. This applies both to the parameter LINENO
Chapter 16: Options 102
and the line number output by the prompt escape %i. If the option is set, the prompt
escape %N will output the string (eval) instead of the script or function name as
an indication. (The two prompt escapes are typically used in the parameter PS4 to
be output when the option XTRACE is set.) If EVAL_LINENO is unset, the line number
of the surrounding script or function is retained during the evaluation.
EXEC (+n, ksh: +n) <D>
Do execute commands. Without this option, commands are read and checked for
syntax errors, but not executed. This option cannot be turned o in an interactive
shell, except when -n is supplied to the shell at startup.
FUNCTION_ARGZERO <C> <Z>
When executing a shell function or sourcing a script, set $0 temporarily to the name
of the function/script. Note that toggling FUNCTION_ARGZERO from on to o (or o
to on) does not change the current value of $0. Only the state upon entry to the
function or script has an eect. Compare POSIX_ARGZERO.
LOCAL_LOOPS
When this option is not set, the eect of break and continue commands may
propagate outside function scope, aecting loops in calling functions. When the
option is set in a calling function, a break or a continue that is not caught within a
called function (regardless of the setting of the option within that function) produces
a warning and the eect is cancelled.
LOCAL_OPTIONS <K>
If this option is set at the point of return from a shell function, most options (includ-
ing this one) which were in force upon entry to the function are restored; options
that are not restored are PRIVILEGED and RESTRICTED. Otherwise, only this option,
and the LOCAL_LOOPS, XTRACE and PRINT_EXIT_VALUE options are restored. Hence
if this is explicitly unset by a shell function the other options in force at the point of
return will remain so. A shell function can also guarantee itself a known shell cong-
uration with a formulation like emulate -L zsh; the -L activates LOCAL_OPTIONS.
LOCAL_PATTERNS
If this option is set at the point of return from a shell function, the state of pattern
disables, as set with the builtin command disable -p, is restored to what it was
when the function was entered. The behaviour of this option is similar to the eect of
LOCAL_OPTIONS on options; hence emulate -L sh (or indeed any other emulation
with the -L option) activates LOCAL_PATTERNS.
LOCAL_TRAPS <K>
If this option is set when a signal trap is set inside a function, then the previous
status of the trap for that signal will be restored when the function exits. Note that
this option must be set prior to altering the trap behaviour in a function; unlike
LOCAL_OPTIONS, the value on exit from the function is irrelevant. However, it does
not need to be set before any global trap for that to be correctly restored by a
function. For example,
unsetopt localtraps
trap - INT
fn() { setopt localtraps; trap INT; sleep 3; }
will restore normal handling of SIGINT after the function exits.
MULTI_FUNC_DEF <Z>
Allow denitions of multiple functions at once in the form fn1 fn2...(); if the
option is not set, this causes a parse error. Denition of multiple functions with
Chapter 16: Options 103
the function keyword is always allowed. Multiple function denitions are not often
used and can cause obscure errors.
MULTIOS <Z>
Perform implicit tees or cats when multiple redirections are attempted (see
Chapter 7 [Redirection], page 16).
OCTAL_ZEROES <S>
Interpret any integer constant beginning with a 0 as octal, per IEEE Std 1003.2-
1992 (ISO 9945-2:1993). This is not enabled by default as it causes problems with
parsing of, for example, date and time strings with leading zeroes.
Sequences of digits indicating a numeric base such as the 08 component in 08#77
are always interpreted as decimal, regardless of leading zeroes.
PIPE_FAIL
By default, when a pipeline exits the exit status recorded by the shell and returned
by the shell variable $? reects that of the rightmost element of a pipeline. If this
option is set, the exit status instead reects the status of the rightmost element of
the pipeline that was non-zero, or zero if all elements exited with zero status.
SOURCE_TRACE
If set, zsh will print an informational message announcing the name of each le it
loads. The format of the output is similar to that for the XTRACE option, with the
message <sourcetrace>. A le may be loaded by the shell itself when it starts up
and shuts down (Startup/Shutdown Files) or by the use of the source and dot
builtin commands.
TYPESET_SILENT
If this is unset, executing any of the typeset family of commands with no options
and a list of parameters that have no values to be assigned but already exist will
display the value of the parameter. If the option is set, they will only be shown when
parameters are selected with the -m option. The option -p is available whether
or not the option is set.
VERBOSE (-v, ksh: -v)
Print shell input lines as they are read.
XTRACE (-x, ksh: -x)
Print commands and their arguments as they are executed. The output is proceded
by the value of $PS4, formatted as described in Chapter 13 [Prompt Expansion],
page 33.
16.2.10 Shell Emulation
BASH_REMATCH
When set, matches performed with the =~ operator will set the BASH_REMATCH array
variable, instead of the default MATCH and match variables. The rst element of the
BASH_REMATCH array will contain the entire matched text and subsequent elements
will contain extracted substrings. This option makes more sense when KSH_ARRAYS
is also set, so that the entire matched portion is stored at index 0 and the rst
substring is at index 1. Without this option, the MATCH variable contains the entire
matched text and the match array variable contains substrings.
BSD_ECHO <S>
Make the echo builtin compatible with the BSD man page echo(1) command. This
disables backslashed escape sequences in echo strings unless the -e option is speci-
ed.
Chapter 16: Options 104
CONTINUE_ON_ERROR
If a fatal error is encountered (see Section 6.6 [Errors], page 14), and the code is
running in a script, the shell will resume execution at the next statement in the
script at the top level, in other words outside all functions or shell constructs such
as loops and conditions. This mimics the behaviour of interactive shells, where the
shell returns to the line editor to read a new command; it was the normal behaviour
in versions of zsh before 5.0.1.
CSH_JUNKIE_HISTORY <C>
A history reference without an event specier will always refer to the previous com-
mand. Without this option, such a history reference refers to the same event as the
previous history reference, defaulting to the previous command.
CSH_JUNKIE_LOOPS <C>
Allow loop bodies to take the form list; end instead of do list; done.
CSH_JUNKIE_QUOTES <C>
Changes the rules for single- and double-quoted text to match that of csh. These
require that embedded newlines be preceded by a backslash; unescaped newlines will
cause an error message. In double-quoted strings, it is made impossible to escape
$, or " (and \ itself no longer needs escaping). Command substitutions are
only expanded once, and cannot be nested.
CSH_NULLCMD <C>
Do not use the values of NULLCMD and READNULLCMD when running redirections with
no command. This make such redirections fail (see Chapter 7 [Redirection], page 16).
KSH_ARRAYS <K> <S>
Emulate ksh array handling as closely as possible. If this option is set, array elements
are numbered from zero, an array parameter without subscript refers to the rst
element instead of the whole array, and braces are required to delimit a subscript
(${path[2]} rather than just $path[2]).
KSH_AUTOLOAD <K> <S>
Emulate ksh function autoloading. This means that when a function is autoloaded,
the corresponding le is merely executed, and must dene the function itself. (By
default, the function is dened to the contents of the le. However, the most common
ksh-style case - of the le containing only a simple denition of the function - is
always handled in the ksh-compatible manner.)
KSH_OPTION_PRINT <K>
Alters the way options settings are printed: instead of separate lists of set and unset
options, all options are shown, marked on if they are in the non-default state, o
otherwise.
KSH_TYPESET <K>
Alters the way arguments to the typeset family of commands, including declare,
export, float, integer, local and readonly, are processed. Without this option,
zsh will perform normal word splitting after command and parameter expansion in
arguments of an assignment; with it, word splitting does not take place in those
cases.
KSH_ZERO_SUBSCRIPT
Treat use of a subscript of value zero in array or string expressions as a reference
to the rst element, i.e. the element that usually has the subscript 1. Ignored if
KSH_ARRAYS is also set.
Chapter 16: Options 105
If neither this option nor KSH_ARRAYS is set, accesses to an element of an array or
string with subscript zero return an empty element or string, while attempts to set
element zero of an array or string are treated as an error. However, attempts to set
an otherwise valid subscript range that includes zero will succeed. For example, if
KSH_ZERO_SUBSCRIPT is not set,
array[0]=(element)
is an error, while
array[0,1]=(element)
is not and will replace the rst element of the array.
This option is for compatibility with older versions of the shell and is not recom-
mended in new code.
POSIX_ALIASES <K> <S>
When this option is set, reserved words are not candidates for alias expansion: it is
still possible to declare any of them as an alias, but the alias will never be expanded.
Reserved words are described in Section 6.5 [Reserved Words], page 14.
Alias expansion takes place while text is being read; hence when this option is set it
does not take eect until the end of any function or other piece of shell code parsed
as one unit. Note this may cause dierences from other shells even when the option
is in eect. For example, when running a command with zsh -c, or even zsh -o
posixaliases -c, the entire command argument is parsed as one unit, so aliases
dened within the argument are not available even in later lines. If in doubt, avoid
use of aliases in non-interactive code.
POSIX_ARGZERO
This option may be used to temporarily disable FUNCTION_ARGZERO and thereby
restore the value of $0 to the name used to invoke the shell (or as set by the
-c command line option). For compatibility with previous versions of the shell,
emulations use NO_FUNCTION_ARGZERO instead of POSIX_ARGZERO, which may result
in unexpected scoping of $0 if the emulation mode is changed inside a function or
script. To avoid this, explicitly enable POSIX_ARGZERO in the emulate command:
emulate sh -o POSIX_ARGZERO
Note that NO_POSIX_ARGZERO has no eect unless FUNCTION_ARGZERO was already
enabled upon entry to the function or script.
POSIX_BUILTINS <K> <S>
When this option is set the command builtin can be used to execute shell builtin com-
mands. Parameter assignments specied before shell functions and special builtins
are kept after the command completes unless the special builtin is prexed with the
command builtin. Special builtins are ., :, break, continue, declare, eval, exit,
export, integer, local, readonly, return, set, shift, source, times, trap and
unset.
In addition, various error conditions associated with the above builtins or exec
cause a non-interactive shell to exit and an interactive shell to return to its top-level
processing.
POSIX_IDENTIFIERS <K> <S>
When this option is set, only the ASCII characters a to z, A to Z, 0 to 9 and _ may
be used in identiers (names of shell parameters and modules).
When the option is unset and multibyte character support is enabled (i.e. it is
compiled in and the option MULTIBYTE is set), then additionally any alphanumeric
characters in the local character set may be used in identiers. Note that scripts
Chapter 16: Options 106
and functions written with this feature are not portable, and also that both options
must be set before the script or function is parsed; setting them during execution is
not sucient as the syntax variable=value has already been parsed as a command
rather than an assignment.
If multibyte character support is not compiled into the shell this option is ignored;
all octets with the top bit set may be used in identiers. This is non-standard but
is the traditional zsh behaviour.
POSIX_STRINGS <K> <S>
This option aects processing of quoted strings. Currently it only aects the be-
haviour of null characters, i.e. character 0 in the portable character set correspond-
ing to US ASCII.
When this option is not set, null characters embedded within strings of the form
$... are treated as ordinary characters. The entire string is maintained within the
shell and output to les where necessary, although owing to restrictions of the library
interface the string is truncated at the null character in le names, environment
variables, or in arguments to external programs.
When this option is set, the $... expression is truncated at the null character.
Note that remaining parts of the same string beyond the termination of the quotes
are not trunctated.
For example, the command line argument a$b\0cd is treated with the option o
as the characters a, b, null, c, d, and with the option on as the characters a, b, d.
POSIX_TRAPS <K> <S>
When the is option is set, the usual zsh behaviour of executing traps for EXIT on
exit from shell functions is suppressed. In that case, manipulating EXIT traps always
alters the global trap for exiting the shell; the LOCAL_TRAPS option is ignored for the
EXIT trap. Furthermore, a return statement executed in a trap with no argument
passes back from the function the value from the surrounding context, not from
code executed within the trap.
SH_FILE_EXPANSION <K> <S>
Perform lename expansion (e.g., ~ expansion) before parameter expansion, com-
mand substitution, arithmetic expansion and brace expansion. If this option is
unset, it is performed after brace expansion, so things like ~$USERNAME and
~{pfalstad,rc} will work.
SH_NULLCMD <K> <S>
Do not use the values of NULLCMD and READNULLCMD when doing redirections, use :
instead (see Chapter 7 [Redirection], page 16).
SH_OPTION_LETTERS <K> <S>
If this option is set the shell tries to interpret single letter options (which are used
with set and setopt) like ksh does. This also aects the value of the - special
parameter.
SH_WORD_SPLIT (-y) <K> <S>
Causes eld splitting to be performed on unquoted parameter expansions. Note
that this option has nothing to do with word splitting. (See Section 14.3 [Parameter
Expansion], page 43.)
TRAPS_ASYNC
While waiting for a program to exit, handle signals and run traps immediately.
Otherwise the trap is run after a child process has exited. Note this does not aect
the point at which traps are run for any case other than when the shell is waiting
for a child process.
Chapter 16: Options 107
16.2.11 Shell State
INTERACTIVE (-i, ksh: -i)
This is an interactive shell. This option is set upon initialisation if the standard input
is a tty and commands are being read from standard input. (See the discussion of
SHIN_STDIN.) This heuristic may be overridden by specifying a state for this option
on the command line. The value of this option can only be changed via ags supplied
at invocation of the shell. It cannot be changed once zsh is running.
LOGIN (-l, ksh: -l)
This is a login shell. If this option is not explicitly set, the shell becomes a login
shell if the rst character of the argv[0] passed to the shell is a -.
PRIVILEGED (-p, ksh: -p)
Turn on privileged mode. This is enabled automatically on startup if the eective
user (group) ID is not equal to the real user (group) ID. Turning this option o
causes the eective user and group IDs to be set to the real user and group IDs.
This option disables sourcing user startup les. If zsh is invoked as sh or ksh
with this option set, /etc/suid_profile is sourced (after /etc/profile on inter-
active shells). Sourcing ~/.profile is disabled and the contents of the ENV variable
is ignored. This option cannot be changed using the -m option of setopt and
unsetopt, and changing it inside a function always changes it globally regardless of
the LOCAL_OPTIONS option.
RESTRICTED (-r)
Enables restricted mode. This option cannot be changed using unsetopt, and set-
ting it inside a function always changes it globally regardless of the LOCAL_OPTIONS
option. See Section 4.3 [Restricted Shell], page 7.
SHIN_STDIN (-s, ksh: -s)
Commands are being read from the standard input. Commands are read from
standard input if no command is specied with -c and no le of commands is
specied. If SHIN_STDIN is set explicitly on the command line, any argument that
would otherwise have been taken as a le to run will instead be treated as a normal
positional parameter. Note that setting or unsetting this option on the command
line does not necessarily aect the state the option will have while the shell is running
- that is purely an indicator of whether on not commands are actually being read
from standard input. The value of this option can only be changed via ags supplied
at invocation of the shell. It cannot be changed once zsh is running.
SINGLE_COMMAND (-t, ksh: -t)
If the shell is reading from standard input, it exits after a single command has
been executed. This also makes the shell non-interactive, unless the INTERACTIVE
option is explicitly set on the command line. The value of this option can only be
changed via ags supplied at invocation of the shell. It cannot be changed once zsh
is running.
16.2.12 Zle
BEEP (+B) <D>
Beep on error in ZLE.
COMBINING_CHARS
Assume that the terminal displays combining characters correctly. Specically, if
a base alphanumeric character is followed by one or more zero-width punctuation
characters, assume that the zero-width characters will be displayed as modications
Chapter 16: Options 108
to the base character within the same width. Not all terminals handle this. If
this option is not set, zero-width characters are displayed separately with special
mark-up.
If this option is set, the pattern test [[:WORD:]] matches a zero-width punctuation
character on the assumption that it will be used as part of a word in combina-
tion with a word character. Otherwise the base shell does not handle combining
characters specially.
EMACS If ZLE is loaded, turning on this option has the equivalent eect of bindkey -
e. In addition, the VI option is unset. Turning it o has no eect. The option
setting is not guaranteed to reect the current keymap. This option is provided for
compatibility; bindkey is the recommended interface.
OVERSTRIKE
Start up the line editor in overstrike mode.
SINGLE_LINE_ZLE (-M) <K>
Use single-line command line editing instead of multi-line.
Note that although this is on by default in ksh emulation it only provides supercial
compatibility with the ksh line editor and reduces the eectiveness of the zsh line
editor. As it has no eect on shell syntax, many users may wish to disable this
option when using ksh emulation interactively.
VI If ZLE is loaded, turning on this option has the equivalent eect of bindkey -v.
In addition, the EMACS option is unset. Turning it o has no eect. The option
setting is not guaranteed to reect the current keymap. This option is provided for
compatibility; bindkey is the recommended interface.
ZLE (-Z) Use the zsh line editor. Set by default in interactive shells connected to a terminal.
16.3 Option Aliases
Some options have alternative names. These aliases are never used for output, but can be used
just like normal option names when specifying options to the shell.
BRACE_EXPAND
NO IGNORE_BRACES (ksh and bash compatibility)
DOT_GLOB GLOB_DOTS (bash compatibility)
HASH_ALL HASH_CMDS (bash compatibility)
HIST_APPEND
APPEND_HISTORY (bash compatibility)
HIST_EXPAND
BANG_HIST (bash compatibility)
LOG NO HIST_NO_FUNCTIONS (ksh compatibility)
MAIL_WARN
MAIL_WARNING (bash compatibility)
ONE_CMD SINGLE_COMMAND (bash compatibility)
PHYSICAL CHASE_LINKS (ksh and bash compatibility)
PROMPT_VARS
PROMPT_SUBST (bash compatibility)
STDIN SHIN_STDIN (ksh compatibility)
Chapter 16: Options 109
TRACK_ALL
HASH_CMDS (ksh compatibility)
16.4 Single Letter Options
16.4.1 Default set
-0 CORRECT
-1 PRINT EXIT VALUE
-2 NO BAD PATTERN
-3 NO NOMATCH
-4 GLOB DOTS
-5 NOTIFY
-6 BG NICE
-7 IGNORE EOF
-8 MARK DIRS
-9 AUTO LIST
-B NO BEEP
-C NO CLOBBER
-D PUSHD TO HOME
-E PUSHD SILENT
-F NO GLOB
-G NULL GLOB
-H RM STAR SILENT
-I IGNORE BRACES
-J AUTO CD
-K NO BANG HIST
-L SUN KEYBOARD HACK
-M SINGLE LINE ZLE
-N AUTO PUSHD
-O CORRECT ALL
-P RC EXPAND PARAM
-Q PATH DIRS
-R LONG LIST JOBS
-S REC EXACT
-T CDABLE VARS
-U MAIL WARNING
-V NO PROMPT CR
Chapter 16: Options 110
-W AUTO RESUME
-X LIST TYPES
-Y MENU COMPLETE
-Z ZLE
-a ALL EXPORT
-e ERR EXIT
-f NO RCS
-g HIST IGNORE SPACE
-h HIST IGNORE DUPS
-i INTERACTIVE
-k INTERACTIVE COMMENTS
-l LOGIN
-m MONITOR
-n NO EXEC
-p PRIVILEGED
-r RESTRICTED
-s SHIN STDIN
-t SINGLE COMMAND
-u NO UNSET
-v VERBOSE
-w CHASE LINKS
-x XTRACE
-y SH WORD SPLIT
16.4.2 sh/ksh emulation set
-C NO CLOBBER
-T TRAPS ASYNC
-X MARK DIRS
-a ALL EXPORT
-b NOTIFY
-e ERR EXIT
-f NO GLOB
-i INTERACTIVE
-l LOGIN
-m MONITOR
-n NO EXEC
-p PRIVILEGED
Chapter 17: Shell Builtin Commands 111
-r RESTRICTED
-s SHIN STDIN
-t SINGLE COMMAND
-u NO UNSET
-v VERBOSE
-x XTRACE
16.4.3 Also note
-A Used by set for setting arrays
-b Used on the command line to specify end of option processing
-c Used on the command line to specify a single command
-m Used by setopt for pattern-matching option setting
-o Used in all places to allow use of long option names
-s Used by set to sort positional parameters
17 Shell Builtin Commands
Some shell builtin commands take options as described in individual entries; these are often
referred to in the list below as flags to avoid confusion with shell options, which may also
have an eect on the behaviour of builtin commands. In this introductory section, option
always has the meaning of an option to a command that should be familiar to most command
line users.
Typically, options are single letters preceded by a hyphen (-). Options that take an argument
accept it either immediately following the option letter or after white space, for example print
-C3 * or print -C 3 * are equivalent. Arguments to options are not the same as arguments
to the command; the documentation indicates which is which. Options that do not take an
argument may be combined in a single word, for example print -ca * and print -c -a *
are equivalent.
Some shell builtin commands also take options that begin with + instead of -. The list below
makes clear which commands these are.
Options (together with their individual arguments, if any) must appear in a group before any
non-option arguments; once the rst non-option argument has been found, option processing is
terminated.
All builtin commands other than precommand modiers, even those that have no options, can be
given the argument -- to terminate option processing. This indicates that the following words
are non-option arguments, but is otherwise ignored. This is useful in cases where arguments to
the command may begin with -. For historical reasons, most builtin commands also recognize
a single - in a separate word for this purpose; note that this is less standard and use of -- is
recommended.
- simple command
See Section 6.2 [Precommand Modiers], page 10.
. le [ arg ... ]
Read commands from le and execute them in the current shell environment.
If le does not contain a slash, or if PATH_DIRS is set, the shell looks in the compo-
nents of $path to nd the directory containing le. Files in the current directory are
Chapter 17: Shell Builtin Commands 112
not read unless . appears somewhere in $path. If a le named le.zwc is found,
is newer than le, and is the compiled form (created with the zcompile builtin) of
le, then commands are read from that le instead of le.
If any arguments arg are given, they become the positional parameters; the old
positional parameters are restored when the le is done executing. If le was not
found the return status is 127; if le was found but contained a syntax error the
return status is 126; else the return status is the exit status of the last command
executed.
: [ arg ... ]
This command does nothing, although normal argument expansions is performed
which may have eects on shell parameters. A zero exit status is returned.
alias [ {+|-}gmrsL ] [ name[=value] ... ]
For each name with a corresponding value, dene an alias with that value. A trailing
space in value causes the next word to be checked for alias expansion. If the -g ag
is present, dene a global alias; global aliases are expanded even if they do not occur
in command position.
If the -s ag is present, dene a sux alias: if the command word on a command
line is in the form text.name, where text is any non-empty string, it is replaced
by the text value text.name. Note that name is treated as a literal string, not a
pattern. A trailing space in value is not special in this case. For example,
alias -s ps=gv
will cause the command *.ps to be expanded to gv *.ps. As alias expansion is
carried out earlier than globbing, the *.ps will then be expanded. Sux aliases
constitute a dierent name space from other aliases (so in the above example it is
still possible to create an alias for the command ps) and the two sets are never listed
together.
For each name with no value, print the value of name, if any. With no arguments,
print all currently dened aliases other than sux aliases. If the -m ag is given
the arguments are taken as patterns (they should be quoted to preserve them from
being interpreted as glob patterns), and the aliases matching these patterns are
printed. When printing aliases and one of the -g, -r or -s ags is present, restrict
the printing to global, regular or sux aliases, respectively; a regular alias is one
which is neither a global nor a sux alias. Using + instead of -, or ending the
option list with a single +, prevents the values of the aliases from being printed.
If the -L ag is present, then print each alias in a manner suitable for putting in
a startup script. The exit status is nonzero if a name (with no value) is given for
which no alias has been dened.
For more on aliases, include common problems, Section 6.8 [Aliasing], page 15.
autoload [ {+|-}UXkmtz ] [ -w ] [ name ... ]
Equivalent to functions -u, with the exception of -X/+X and -w.
The ag -X may be used only inside a shell function, and may not be followed
by a name. It causes the calling function to be marked for autoloading and then
immediately loaded and executed, with the current array of positional parameters
as arguments. This replaces the previous denition of the function. If no function
denition is found, an error is printed and the function remains undened and
marked for autoloading.
The ag +X attempts to load each name as an autoloaded function, but does not
execute it. The exit status is zero (success) if the function was not previously dened
and a denition for it was found. This does not replace any existing denition of the
Chapter 17: Shell Builtin Commands 113
function. The exit status is nonzero (failure) if the function was already dened or
when no denition was found. In the latter case the function remains undened and
marked for autoloading. If ksh-style autoloading is enabled, the function created
will contain the contents of the le plus a call to the function itself appended to it,
thus giving normal ksh autoloading behaviour on the rst call to the function. If
the -m ag is also given each name is treated as a pattern and all functions already
marked for autoload that match the pattern are loaded.
With the -w ag, the names are taken as names of les compiled with the zcompile
builtin, and all functions dened in them are marked for autoloading.
The ags -z and -k mark the function to be autoloaded using the zsh or ksh style, as
if the option KSH_AUTOLOAD were unset or were set, respectively. The ags override
the setting of the option at the time the function is loaded.
Note that the autoload command makes no attempt to ensure the shell options set
during the loading or execution of the le have any particular value. For this, the
emulate command can be used:
emulate zsh -c autoload -Uz func
arranges that when func is loaded the shell is in native zsh emulation, and this
emulation is also applied when func is run.
bg [ job ... ]
job ... & Put each specied job in the background, or the current job if none is specied.
bindkey See Section 18.3 [Zle Builtins], page 146.
break [ n ]
Exit from an enclosing for, while, until, select or repeat loop. If n is specied,
then break n levels instead of just one.
builtin name [ args ... ]
Executes the builtin name, with the given args.
bye Same as exit.
cap See Section 22.3 [The zsh/cap Module], page 265.
cd [ -qsLP ] [ arg ]
cd [ -qsLP ] old new
cd [ -qsLP ] {+|-}n
Change the current directory. In the rst form, change the current directory to arg,
or to the value of $HOME if arg is not specied. If arg is -, change to the previous
directory.
Otherwise, if arg begins with a slash, attempt to change to the directory given by
arg.
If arg does not begin with a slash, the behaviour depends on whether the current
directory . occurs in the list of directories contained in the shell parameter cdpath.
If it does not, rst attempt to change to the directory arg under the current directory,
and if that fails but cdpath is set and contains at least one element attempt to change
to the directory arg under each component of cdpath in turn until successful. If .
occurs in cdpath, then cdpath is searched strictly in order so that . is only tried
at the appropriate point.
The order of testing cdpath is modied if the option POSIX_CD is set, as described
in the documentation for the option.
If no directory is found, the option CDABLE_VARS is set, and a parameter named arg
exists whose value begins with a slash, treat its value as the directory. In that case,
the parameter is added to the named directory hash table.
Chapter 17: Shell Builtin Commands 114
The second form of cd substitutes the string new for the string old in the name of
the current directory, and tries to change to this new directory.
The third form of cd extracts an entry from the directory stack, and changes to that
directory. An argument of the form +n identies a stack entry by counting from
the left of the list shown by the dirs command, starting with zero. An argument of
the form -n counts from the right. If the PUSHD_MINUS option is set, the meanings
of + and - in this context are swapped.
If the -q (quiet) option is specied, the hook function chpwd and the functions in
the array chpwd_functions are not called. This is useful for calls to cd that do not
change the environment seen by an interactive user.
If the -s option is specied, cd refuses to change the current directory if the given
pathname contains symlinks. If the -P option is given or the CHASE_LINKS option is
set, symbolic links are resolved to their true values. If the -L option is given symbolic
links are retained in the directory (and not resolved) regardless of the state of the
CHASE_LINKS option.
chdir Same as cd.
clone See Section 22.4 [The zsh/clone Module], page 265.
command [ -pvV ] simple command
The simple command argument is taken as an external command instead of a func-
tion or builtin and is executed. If the POSIX_BUILTINS option is set, builtins will
also be executed but certain special properties of them are suppressed. The -p ag
causes a default path to be searched instead of that in $path. With the -v ag,
command is similar to whence and with -V, it is equivalent to whence -v.
See also Section 6.2 [Precommand Modiers], page 10.
comparguments
See Section 22.8 [The zsh/computil Module], page 271.
compcall See Section 22.5 [The zsh/compctl Module], page 266.
compctl See Section 22.5 [The zsh/compctl Module], page 266.
compdescribe
See Section 22.8 [The zsh/computil Module], page 271.
compfiles
See Section 22.8 [The zsh/computil Module], page 271.
compgroups
See Section 22.8 [The zsh/computil Module], page 271.
compquote
See Section 22.8 [The zsh/computil Module], page 271.
comptags See Section 22.8 [The zsh/computil Module], page 271.
comptry See Section 22.8 [The zsh/computil Module], page 271.
compvalues
See Section 22.8 [The zsh/computil Module], page 271.
continue [ n ]
Resume the next iteration of the enclosing for, while, until, select or repeat
loop. If n is specied, break out of n-1 loops and resume at the nth enclosing loop.
declare Same as typeset.
Chapter 17: Shell Builtin Commands 115
dirs [ -c ] [ arg ... ]
dirs [ -lpv ]
With no arguments, print the contents of the directory stack. Directories are added
to this stack with the pushd command, and removed with the cd or popd commands.
If arguments are specied, load them onto the directory stack, replacing anything
that was there, and push the current directory onto the stack.
-c clear the directory stack.
-l print directory names in full instead of using of using ~ expressions
(Section 14.7 [Filename Expansion], page 57).
-p print directory entries one per line.
-v number the directories in the stack when printing.
disable [ -afmprs ] name ...
Temporarily disable the named hash table elements or patterns. The default is to
disable builtin commands. This allows you to use an external command with the
same name as a builtin command. The -a option causes disable to act on regular
or global aliases. The -s option causes disable to act on sux aliases. The -f
option causes disable to act on shell functions. The -r options causes disable
to act on reserved words. Without arguments all disabled hash table elements
from the corresponding hash table are printed. With the -m ag the arguments
are taken as patterns (which should be quoted to prevent them from undergoing
lename expansion), and all hash table elements from the corresponding hash table
matching these patterns are disabled. Disabled objects can be enabled with the
enable command.
With the option -p, name ... refer to elements of the shells pattern syntax as
described in Section 14.8 [Filename Generation], page 59. Certain elements can be
disabled separately, as given below.
Note that patterns not allowed by the current settings for the options
EXTENDED_GLOB, KSH_GLOB and SH_GLOB are never enabled, regardless of the setting
here. For example, if EXTENDED_GLOB is not active, the pattern ^ is ineective
even if disable -p "^" has not been issued. The list below indicates any option
settings that restrict the use of the pattern. It should be noted that setting
SH_GLOB has a wider eect then merely disabling patterns as certain expressions,
in particular those involving parentheses, are parsed dierently.
The following patterns may be disabled; all the strings need quoting on the command
line to prevent them from being interpreted immediately as patterns and the patterns
are shown below in single quotes as a reminder.
? The pattern character ? wherever it occurs, including when preceding
a parenthesis with KSH_GLOB.
* The pattern character * wherever it occurs, including recursive globbing
and when preceding a parenthesis with KSH_GLOB.
[ Character classes.
< (NO_SH_GLOB)
Numeric ranges.
| (NO_SH_GLOB)
Alternation in grouped patterns, case statements, or KSH GLOB paren-
thesised expressions.
Chapter 17: Shell Builtin Commands 116
( (NO_SH_GLOB)
Grouping using single parentheses. Disabling this does not disable the
use of parentheses for KSH_GLOB where they are introduced by a special
character, nor for glob qualiers (use setopt NO_BARE_GLOB_QUAL to
disable glob qualiers that use parentheses only).
~ (EXTENDED_GLOB)
Exclusion in the form A~B.
^ (EXTENDED_GLOB)
Exclusion in the form A^B.
# (EXTENDED_GLOB)
The pattern character # wherever it occurs, both for repetition of a
previous pattern and for indicating globbing ags.
?( (KSH_GLOB)
The grouping form ?(...). Note this is also disabled if ? is disabled.
*( (KSH_GLOB)
The grouping form *(...). Note this is also disabled if * is disabled.
+( (KSH_GLOB)
The grouping form +(...).
!( (KSH_GLOB)
The grouping form !(...).
@( (KSH_GLOB)
The grouping form @(...).
disown [ job ... ]
job ... &|
job ... &! Remove the specied jobs from the job table; the shell will no longer report their
status, and will not complain if you try to exit an interactive shell with them running
or stopped. If no job is specied, disown the current job.
If the jobs are currently stopped and the AUTO_CONTINUE option is not set, a warning
is printed containing information about how to make them running after they have
been disowned. If one of the latter two forms is used, the jobs will automatically be
made running, independent of the setting of the AUTO_CONTINUE option.
echo [ -neE ] [ arg ... ]
Write each arg on the standard output, with a space separating each one. If the -n
ag is not present, print a newline at the end. echo recognizes the following escape
sequences:
\a bell character
\b backspace
\c suppress nal newline
\e escape
\f form feed
\n linefeed (newline)
\r carriage return
\t horizontal tab
Chapter 17: Shell Builtin Commands 117
\v vertical tab
\\ backslash
\0NNN character code in octal
\xNN character code in hexadecimal
\uNNNN unicode character code in hexadecimal
\UNNNNNNNN
unicode character code in hexadecimal
The -E ag, or the BSD_ECHO option, can be used to disable these escape sequences.
In the latter case, -e ag can be used to enable them.
echotc See Section 22.26 [The zsh/termcap Module], page 294.
echoti See Section 22.27 [The zsh/terminfo Module], page 294.
emulate [ -LR ] [ {zsh|sh|ksh|csh} [ ags ... ] ]
Without any argument print current emulation mode.
With single argument set up zsh options to emulate the specied shell as much as
possible. csh will never be fully emulated. If the argument is not one of the shells
listed above, zsh will be used as a default; more precisely, the tests performed on the
argument are the same as those used to determine the emulation at startup based
on the shell name, see Section 4.2 [Compatibility], page 7 . In addition to setting
shell options, the command also restores the pristine state of pattern enables, as if
all patterns had been enabled using enable -p.
If the emulate command occurs inside a function that has been marked for execution
tracing with functions -t then the xtrace option will be turned on regardless of
emulation mode or other options. Note that code executed inside the function by
the ., source, or eval commands is not considered to be running directly from the
function, hence does not provoke this behaviour.
If the -R switch is given, all settable options are reset to their default value cor-
responding to the specied emulation mode, except for certain options describing
the interactive environment; otherwise, only those options likely to cause portability
problems in scripts and functions are altered. If the -L switch is given, the options
LOCAL_OPTIONS, LOCAL_PATTERNS and LOCAL_TRAPS will be set as well, causing the
eects of the emulate command and any setopt, disable -p or enable -p, and
trap commands to be local to the immediately surrounding shell function, if any;
normally these options are turned o in all emulation modes except ksh. The -L
switch is mutually exclusive with the use of -c in ags.
The ags may be any of the invocation-time ags described in Chapter 4 [Invoca-
tion], page 6, except that -o EMACS and -o VI may not be used. Flags such as
+r/+o RESTRICTED may be prohibited in some circumstances.
If -c arg appears in ags, arg is evaluated while the requested emulation is tem-
porarily in eect. In this case the emulation mode and all options are restored to
their previous values before emulate returns. The -R switch may precede the name
of the shell to emulate; note this has a meaning distinct from including -R in ags.
Use of -c enables sticky emulation mode for functions dened within the evalu-
ated expression: the emulation mode is associated thereafter with the function so
that whenever the function is executed the emulation (respecting the -R switch, if
present) and all options are set (and pattern disables cleared) before entry to the
function, and the state is restored after exit. If the function is called when the
sticky emulation is already in eect, either within an emulate shell -c expression
Chapter 17: Shell Builtin Commands 118
or within another function with the same sticky emulation, entry and exit from the
function do not cause options to be altered (except due to standard processing such
as the LOCAL_OPTIONS option). This also applies to functions marked for autoload
within the sticky emulation; the appropriate set of options will be applied at the
point the function is loaded as well as when it is run.
For example:
emulate sh -c fni() { setopt cshnullglob; }
fno() { fni; }
fno
The two functions fni and fno are dened with sticky sh emulation. fno is then
executed, causing options associated with emulations to be set to their values in sh.
fni then calls fno; because fno is also marked for sticky sh emulation, no option
changes take place on entry to or exit from it. Hence the option cshnullglob,
turned o by sh emulation, will be turned on within fni and remain on on return
to fno. On exit from fno, the emulation mode and all options will be restored to
the state they were in before entry to the temporary emulation.
The documentation above is typically sucient for the intended purpose of executing
code designed for other shells in a suitable environment. More detailed rules follow.
1. The sticky emulation environment provided by emulate shell -c is
identical to that provided by entry to a function marked for sticky emu-
lation as a consequence of being dened in such an environment. Hence,
for example, the sticky emulation is inherited by subfunctions dened
within functions with sticky emulation.
2. No change of options takes place on entry to or exit from functions
that are not marked for sticky emulation, other than those that would
normally take place, even if those functions are called within sticky
emulation.
3. No special handling is provided for functions marked for autoload nor
for functions present in wordcode created by the zcompile command.
4. The presence or absence of the -R switch to emulate corresponds to
dierent sticky emulation modes, so for example emulate sh -c, em-
ulate -R sh -c and emulate csh -c are treated as three distinct
sticky emulations.
5. Dierence in shell options supplied in addition to the basic emulation
also mean the sticky emulations are dierent, so for example emulate
zsh -c and emulate zsh -o cbases -c are treated as distinct sticky
emulations.
enable [ -afmprs ] name ...
Enable the named hash table elements, presumably disabled earlier with disable.
The default is to enable builtin commands. The -a option causes enable to act on
regular or global aliases. The -s option causes enable to act on sux aliases. The
-f option causes enable to act on shell functions. The -r option causes enable
to act on reserved words. Without arguments all enabled hash table elements from
the corresponding hash table are printed. With the -m ag the arguments are taken
as patterns (should be quoted) and all hash table elements from the corresponding
hash table matching these patterns are enabled. Enabled objects can be disabled
with the disable builtin command.
Chapter 17: Shell Builtin Commands 119
enable -p reenables patterns disabled with disable -p. Note that it does not
override globbing options; for example, enable -p "~" does not cause the pattern
character ~ to be active unless the EXTENDED_GLOB option is also set. To enable all
possible patterns (so that they may be invidually disabled with disable -p), use
setopt EXTENDED_GLOB KSH_GLOB NO_SH_GLOB.
eval [ arg ... ]
Read the arguments as input to the shell and execute the resulting command(s) in
the current shell process. The return status is the same as if the commands had been
executed directly by the shell; if there are no args or they contain no commands
(i.e. are an empty string or whitespace) the return status is zero.
exec [ -cl ] [ -a argv0 ] simple command
Replace the current shell with an external command rather than forking. With -c
clear the environment; with -l prepend - to the argv[0] string of the command
executed (to simulate a login shell); with -a argv0 set the argv[0] string of the
command executed. See Section 6.2 [Precommand Modiers], page 10.
exit [ n ] Exit the shell with the exit status specied by n; if none is specied, use the exit
status from the last command executed. An EOF condition will also cause the shell
to exit, unless the IGNORE_EOF option is set.
See notes at the end of Chapter 10 [Jobs & Signals], page 25 for some possibly
unexpected interactions of the exit command with jobs.
export [ name[=value] ... ]
The specied names are marked for automatic export to the environment of subse-
quently executed commands. Equivalent to typeset -gx. If a parameter specied
does not already exist, it is created in the global scope.
false [ arg ... ]
Do nothing and return an exit status of 1.
fc [ -e ename ] [ -m match ] [ old=new ... ] [ rst [ last ] ]
fc -l [ -nrdfEiD ] [ -t timefmt ] [ -m match ]
[ old=new ... ] [ rst [ last ] ]
fc -p [ -a ] [ lename [ histsize [ savehistsize ] ] ]
fc -P
fc -ARWI [ lename ]
Select a range of commands from rst to last from the history list. The arguments
rst and last may be specied as a number or as a string. A negative number is
used as an oset to the current history event number. A string species the most
recent event beginning with the given string. All substitutions old=new, if any, are
then performed on the commands.
If the -l ag is given, the resulting commands are listed on standard output. If the
-m ag is also given the rst argument is taken as a pattern (should be quoted) and
only the history events matching this pattern will be shown. Otherwise the editor
program ename is invoked on a le containing these history events. If ename is not
given, the value of the parameter FCEDIT is used; if that is not set the value of the
parameter EDITOR is used; if that is not set a builtin default, usually vi is used. If
ename is -, no editor is invoked. When editing is complete, the edited command
is executed.
If rst is not specied, it will be set to -1 (the most recent event), or to -16 if the
-l ag is given. If last is not specied, it will be set to rst, or to -1 if the -l ag
is given. However, if the current event has added entries to the history with print
Chapter 17: Shell Builtin Commands 120
-s or fc -R, then the default last for -l includes all new history entries since the
current event began.
The ag -r reverses the order of the commands and the ag -n suppresses command
numbers when listing.
Also when listing,
-d prints timestamps for each command
-f prints full time-date stamps in the US MM/DD/YY hh:mm format
-E prints full time-date stamps in the European dd.mm.yyyy hh:mm
format
-i prints full time-date stamps in ISO8601 yyyy-mm-dd hh:mm format
-t fmt prints time and date stamps in the given format; fmt is formatted
with the strftime function with the zsh extensions described for the
%D{string} prompt format in Chapter 13 [Prompt Expansion], page 33.
The resulting formatted string must be no more than 256 characters or
will not be printed.
-D prints elapsed times; may be combined with one of the options above.
fc -p pushes the current history list onto a stack and switches to a new history
list. If the -a option is also specied, this history list will be automatically popped
when the current function scope is exited, which is a much better solution than
creating a trap function to call fc -P manually. If no arguments are specied, the
history list is left empty, $HISTFILE is unset, and $HISTSIZE & $SAVEHIST are set
to their default values. If one argument is given, $HISTFILE is set to that lename,
$HISTSIZE & $SAVEHIST are left unchanged, and the history le is read in (if it
exists) to initialize the new list. If a second argument is specied, $HISTSIZE &
$SAVEHIST are instead set to the single specied numeric value. Finally, if a third
argument is specied, $SAVEHIST is set to a separate value from $HISTSIZE. You
are free to change these environment values for the new history list however you
desire in order to manipulate the new history list.
fc -P pops the history list back to an older list saved by fc -p. The current
list is saved to its $HISTFILE before it is destroyed (assuming that $HISTFILE and
$SAVEHIST are set appropriately, of course). The values of $HISTFILE, $HISTSIZE,
and $SAVEHIST are restored to the values they had when fc -p was called. Note
that this restoration can conict with making these variables "local", so your best
bet is to avoid local declarations for these variables in functions that use fc -p.
The one other guaranteed-safe combination is declaring these variables to be local at
the top of your function and using the automatic option (-a) with fc -p. Finally,
note that it is legal to manually pop a push marked for automatic popping if you
need to do so before the function exits.
fc -R reads the history from the given le, fc -W writes the history out to the
given le, and fc -A appends the history out to the given le. If no lename is
specied, the $HISTFILE is assumed. If the -I option is added to -R, only those
events that are not already contained within the internal history list are added.
If the -I option is added to -A or -W, only those events that are new since last
incremental append/write to the history le are appended/written. In any case, the
created le will have no more than $SAVEHIST entries.
Chapter 17: Shell Builtin Commands 121
fg [ job ... ]
job ... Bring each specied job in turn to the foreground. If no job is specied, resume the
current job.
float [ {+|-}EFHghlprtux ] [ -LRZ [ n ]] [ name[=value] ... ]
Equivalent to typeset -E, except that options irrelevant to oating point numbers
are not permitted.
functions [ {+|-}UXkmtTuz ] [ name ... ]
functions -M mathfn [ min [ max [ shellfn ] ] ]
functions -M [ -m pattern ... ]
functions +M [ -m ] mathfn
Equivalent to typeset -f, with the exception of the -M option. Use of the -M option
may not be combined with any of the options handled by typeset -f.
functions -M mathfn denes mathfn as the name of a mathematical function recog-
nised in all forms of arithmetical expressions; see Chapter 11 [Arithmetic Evalua-
tion], page 26. By default mathfn may take any number of comma-separated ar-
guments. If min is given, it must have exactly min args; if min and max are both
given, it must have at least min and at most max args. max may be -1 to indicate
that there is no upper limit.
By default the function is implemented by a shell function of the same name;
if shellfn is specied it gives the name of the corresponding shell function while
mathfn remains the name used in arithmetical expressions. The name of the func-
tion in $0 is mathfn (not shellfn as would usually be the case), provided the option
FUNCTION_ARGZERO is in eect. The positional parameters in the shell function cor-
respond to the arguments of the mathematical function call. The result of the last
arithmetical expression evaluated inside the shell function (even if it is a form that
normally only returns a status) gives the result of the mathematical function.
functions -M with no arguments lists all such user-dened functions in the same
form as a denition. With the additional option -m and a list of arguments, all
functions whose mathfn matches one of the pattern arguments are listed.
function +M removes the list of mathematical functions; with the additional option
-m the arguments are treated as patterns and all functions whose mathfn matches
the pattern are removed. Note that the shell function implementing the behaviour
is not removed (regardless of whether its name coincides with mathfn).
For example, the following prints the cube of 3:
zmath_cube() { (( $1 * $1 * $1 )) }
functions -M cube 1 1 zmath_cube
print $(( cube(3) ))
getcap See Section 22.3 [The zsh/cap Module], page 265.
getln [ -AclneE ] name ...
Read the top value from the buer stack and put it in the shell parameter name.
Equivalent to read -zr.
getopts optstring name [ arg ... ]
Checks the args for legal options. If the args are omitted, use the positional pa-
rameters. A valid option argument begins with a + or a -. An argument not
beginning with a + or a -, or the argument --, ends the options. Note that a
single - is not considered a valid option argument. optstring contains the letters
that getopts recognizes. If a letter is followed by a :, that option requires an
argument. The options can be separated from the argument by blanks.
Chapter 17: Shell Builtin Commands 122
Each time it is invoked, getopts places the option letter it nds in the shell param-
eter name, prepended with a + when arg begins with a +. The index of the next
arg is stored in OPTIND. The option argument, if any, is stored in OPTARG.
The rst option to be examined may be changed by explicitly assigning to OPTIND.
OPTIND has an initial value of 1, and is normally reset to 1 upon exit from a shell
function. OPTARG is not reset and retains its value from the most recent call to
getopts. If either of OPTIND or OPTARG is explicitly unset, it remains unset, and the
index or option argument is not stored. The option itself is still stored in name in
this case.
A leading : in optstring causes getopts to store the letter of any invalid option in
OPTARG, and to set name to ? for an unknown option and to : when a required
argument is missing. Otherwise, getopts sets name to ? and prints an error
message when an option is invalid. The exit status is nonzero when there are no
more options.
hash [ -Ldfmrv ] [ name[=value] ] ...
hash can be used to directly modify the contents of the command hash table, and
the named directory hash table. Normally one would modify these tables by mod-
ifying ones PATH (for the command hash table) or by creating appropriate shell
parameters (for the named directory hash table). The choice of hash table to work
on is determined by the -d option; without the option the command hash table is
used, and with the option the named directory hash table is used.
Given no arguments, and neither the -r or -f options, the selected hash table will
be listed in full.
The -r option causes the selected hash table to be emptied. It will be subsequently
rebuilt in the normal fashion. The -f option causes the selected hash table to be
fully rebuilt immediately. For the command hash table this hashes all the absolute
directories in the PATH, and for the named directory hash table this adds all users
home directories. These two options cannot be used with any arguments.
The -m option causes the arguments to be taken as patterns (which should be quoted)
and the elements of the hash table matching those patterns are printed. This is the
only way to display a limited selection of hash table elements.
For each name with a corresponding value, put name in the selected hash table,
associating it with the pathname value. In the command hash table, this means
that whenever name is used as a command argument, the shell will try to execute
the le given by value. In the named directory hash table, this means that value
may be referred to as ~name.
For each name with no corresponding value, attempt to add name to the hash table,
checking what the appropriate value is in the normal manner for that hash table.
If an appropriate value cant be found, then the hash table will be unchanged.
The -v option causes hash table entries to be listed as they are added by explicit
specication. If has no eect if used with -f.
If the -L ag is present, then each hash table entry is printed in the form of a call
to hash.
history Same as fc -l.
integer [ {+|-}Hghilprtux ] [ -LRZ [ n ]] [ name[=value] ... ]
Equivalent to typeset -i, except that options irrelevant to integers are not per-
mitted.
Chapter 17: Shell Builtin Commands 123
jobs [ -dlprs ] [ job ... ]
jobs -Z string
Lists information about each given job, or all jobs if job is omitted. The -l ag
lists process IDs, and the -p ag lists process groups. If the -r ag is specied only
running jobs will be listed and if the -s ag is given only stopped jobs are shown.
If the -d ag is given, the directory from which the job was started (which may not
be the current directory of the job) will also be shown.
The -Z option replaces the shells argument and environment space with the given
string, truncated if necessary to t. This will normally be visible in ps (man page
ps(1)) listings. This feature is typically used by daemons, to indicate their state.
kill [ -s signal name | -n signal number | -sig ] job ...
kill -l [ sig ... ]
Sends either SIGTERM or the specied signal to the given jobs or processes. Signals
are given by number or by names, with or without the SIG prex. If the signal
being sent is not KILL or CONT, then the job will be sent a CONT signal if it is
stopped. The argument job can be the process ID of a job not in the job list. In the
second form, kill -l, if sig is not specied the signal names are listed. Otherwise,
for each sig that is a name, the corresponding signal number is listed. For each sig
that is a signal number or a number representing the exit status of a process which
was terminated or stopped by a signal the name of the signal is printed.
On some systems, alternative signal names are allowed for a few signals. Typical
examples are SIGCHLD and SIGCLD or SIGPOLL and SIGIO, assuming they correspond
to the same signal number. kill -l will only list the preferred form, however kill
-l alt will show if the alternative form corresponds to a signal number. For example,
under Linux kill -l IO and kill -l POLL both output 29, hence kill -IO and
kill -POLL have the same eect.
Many systems will allow process IDs to be negative to kill a process group or zero
to kill the current process group.
let arg ... Evaluate each arg as an arithmetic expression. See Chapter 11 [Arithmetic Evalua-
tion], page 26 for a description of arithmetic expressions. The exit status is 0 if the
value of the last expression is nonzero, 1 if it is zero, and 2 if an error occurred.
limit [ -hs ] [ resource [ limit ] ] ...
Set or display resource limits. Unless the -s ag is given, the limit applies only the
children of the shell. If -s is given without other arguments, the resource limits of
the current shell is set to the previously set resource limits of the children.
If limit is not specied, print the current limit placed on resource, otherwise set the
limit to the specied value. If the -h ag is given, use hard limits instead of soft
limits. If no resource is given, print all limits.
When looping over multiple resources, the shell will abort immediately if it detects
a badly formed argument. However, if it fails to set a limit for some other reason it
will continue trying to set the remaining limits.
resource can be one of:
addressspace
Maximum amount of address space used.
aiomemorylocked
Maximum amount of memory locked in RAM for AIO operations.
aiooperations
Maximum number of AIO operations.
Chapter 17: Shell Builtin Commands 124
cachedthreads
Maximum number of cached threads.
coredumpsize
Maximum size of a core dump.
cputime Maximum CPU seconds per process.
datasize Maximum data size (including stack) for each process.
descriptors
Maximum value for a le descriptor.
filesize Largest single le allowed.
kqueues Maximum number of kqueues allocated.
maxproc Maximum number of processes.
maxpthreads
Maximum number of threads per process.
memorylocked
Maximum amount of memory locked in RAM.
memoryuse
Maximum resident set size.
msgqueue Maximum number of bytes in POSIX message queues.
posixlocks
Maximum number of POSIX locks per user.
pseudoterminals
Maximum number of pseudo-terminals.
resident Maximum resident set size.
sigpending
Maximum number of pending signals.
sockbufsize
Maximum size of all socket buers.
stacksize
Maximum stack size for each process.
swapsize Maximum amount of swap used.
vmemorysize
Maximum amount of virtual memory.
Which of these resource limits are available depends on the system. resource can be
abbreviated to any unambiguous prex. It can also be an integer, which corresponds
to the integer dened for the resource by the operating system.
If argument corresponds to a number which is out of the range of the resources
congured into the shell, the shell will try to read or write the limit anyway, and
will report an error if this fails. As the shell does not store such resources internally,
an attempt to set the limit will fail unless the -s option is present.
limit is a number, with an optional scaling factor, as follows:
nh hours
nk kilobytes (default)
Chapter 17: Shell Builtin Commands 125
nm megabytes or minutes
[mm:]ss minutes and seconds
The limit command is not made available by default when the shell starts in a mode
emulating another shell. It can be made available with the command zmodload -F
zsh/rlimits b:limit.
local [ {+|-}AEFHUahlprtux ] [ -LRZi [ n ]] [ name[=value] ] ...
Same as typeset, except that the options -g, and -f are not permitted. In this
case the -x option does not force the use of -g, i.e. exported variables will be local
to functions.
log List all users currently logged in who are aected by the current setting of the watch
parameter.
logout [ n ]
Same as exit, except that it only works in a login shell.
noglob simple command
See Section 6.2 [Precommand Modiers], page 10.
popd [ [-q] {+|-}n ]
Remove an entry from the directory stack, and perform a cd to the new top directory.
With no argument, the current top entry is removed. An argument of the form +n
identies a stack entry by counting from the left of the list shown by the dirs
command, starting with zero. An argument of the form -n counts from the right.
If the PUSHD_MINUS option is set, the meanings of + and - in this context are
swapped.
If the -q (quiet) option is specied, the hook function chpwd and the functions
in the array $chpwd_functions are not called, and the new directory stack is not
printed. This is useful for calls to popd that do not change the environment seen by
an interactive user.
print [ -abcDilmnNoOpPrsSz ] [ -u n ] [ -f format ] [ -C cols ]
[ -R [ -en ]] [ arg ... ]
With the -f option the arguments are printed as described by printf. With
no ags or with the ag -, the arguments are printed on the standard output
as described by echo, with the following dierences: the escape sequence \M-x
metaes the character x (sets the highest bit), \C-x produces a control character
(\C-@ and \C-? give the characters NUL and delete), and \E is a synonym for
\e. Finally, if not in an escape sequence, \ escapes the following character and is
not printed.
-a Print arguments with the column incrementing rst. Only useful with
the -c and -C options.
-b Recognize all the escape sequences dened for the bindkey command,
see Section 18.3 [Zle Builtins], page 146.
-c Print the arguments in columns. Unless -a is also given, arguments are
printed with the row incrementing rst.
-C cols Print the arguments in cols columns. Unless -a is also given, arguments
are printed with the row incrementing rst.
-D Treat the arguments as paths, replacing directory prexes with ~ ex-
pressions corresponding to directory names, as appropriate.
-i If given together with -o or -O, sorting is performed case-independently.
Chapter 17: Shell Builtin Commands 126
-l Print the arguments separated by newlines instead of spaces.
-m Take the rst argument as a pattern (should be quoted), and remove it
from the argument list together with subsequent arguments that do not
match this pattern.
-n Do not add a newline to the output.
-N Print the arguments separated and terminated by nulls.
-o Print the arguments sorted in ascending order.
-O Print the arguments sorted in descending order.
-p Print the arguments to the input of the coprocess.
-P Perform prompt expansion (see Chapter 13 [Prompt Expansion],
page 33).
-r Ignore the escape conventions of echo.
-R Emulate the BSD echo command, which does not process escape se-
quences unless the -e ag is given. The -n ag suppresses the trailing
newline. Only the -e and -n ags are recognized after -R; all other
arguments and options are printed.
-s Place the results in the history list instead of on the standard output.
Each argument to the print command is treated as a single word in
the history, regardless of its content.
-S Place the results in the history list instead of on the standard output.
In this case only a single argument is allowed; it will be split into words
as if it were a full shell command line. The eect is similar to reading
the line from a history le with the HIST_LEX_WORDS option active.
-u n Print the arguments to le descriptor n.
-z Push the arguments onto the editing buer stack, separated by spaces.
If any of -m, -o or -O are used in combination with -f and there are no
arguments (after the removal process in the case of -m) then nothing is printed.
printf format [ arg ... ]
Print the arguments according to the format specication. Formatting rules are the
same as used in C. The same escape sequences as for echo are recognised in the for-
mat. All C conversion specications ending in one of csdiouxXeEfgGn are handled.
In addition to this, %b can be used instead of %s to cause escape sequences in the
argument to be recognised and %q can be used to quote the argument in such a
way that allows it to be reused as shell input. With the numeric format speciers, if
the corresponding argument starts with a quote character, the numeric value of the
following character is used as the number to print otherwise the argument is evalu-
ated as an arithmetic expression. See Chapter 11 [Arithmetic Evaluation], page 26
for a description of arithmetic expressions. With %n, the corresponding argument
is taken as an identier which is created as an integer parameter.
Normally, conversion specications are applied to each argument in order but they
can explicitly specify the nth argument is to be used by replacing % by %n$ and
* by *n$. It is recommended that you do not mix references of this explicit style
with the normal style and the handling of such mixed styles may be subject to future
change.
Chapter 17: Shell Builtin Commands 127
If arguments remain unused after formatting, the format string is reused until all
arguments have been consumed. With the print builtin, this can be suppressed by
using the -r option. If more arguments are required by the format than have been
specied, the behaviour is as if zero or an empty string had been specied as the
argument.
pushd [ -qsLP ] [ arg ]
pushd [ -qsLP ] old new
pushd [ -qsLP ] {+|-}n
Change the current directory, and push the old current directory onto the directory
stack. In the rst form, change the current directory to arg. If arg is not specied,
change to the second directory on the stack (that is, exchange the top two entries),
or change to $HOME if the PUSHD_TO_HOME option is set or if there is only one entry
on the stack. Otherwise, arg is interpreted as it would be by cd. The meaning of
old and new in the second form is also the same as for cd.
The third form of pushd changes directory by rotating the directory list. An argu-
ment of the form +n identies a stack entry by counting from the left of the list
shown by the dirs command, starting with zero. An argument of the form -n
counts from the right. If the PUSHD_MINUS option is set, the meanings of + and -
in this context are swapped.
If the -q (quiet) option is specied, the hook function chpwd and the functions in the
array $chpwd_functions are not called, and the new directory stack is not printed.
This is useful for calls to pushd that do not change the environment seen by an
interactive user.
If the option -q is not specied and the shell option PUSHD_SILENT is not set, the
directory stack will be printed after a pushd is performed.
The options -s, -L and -P have the same meanings as for the cd builtin.
pushln [ arg ... ]
Equivalent to print -nz.
pwd [ -rLP ]
Print the absolute pathname of the current working directory. If the -r or the -P
ag is specied, or the CHASE_LINKS option is set and the -L ag is not given, the
printed path will not contain symbolic links.
r Same as fc -e -.
read [ -rszpqAclneE ] [ -t [ num ] ] [ -k [ num ] ] [ -d delim ] [ -u n ] [ name[?prompt] ] [
name ... ]
Read one line and break it into elds using the characters in $IFS as separators,
except as noted below. The rst eld is assigned to the rst name, the second eld
to the second name, etc., with leftover elds assigned to the last name. If name is
omitted then REPLY is used for scalars and reply for arrays.
-r Raw mode: a \ at the end of a line does not signify line continuation
and backslashes in the line dont quote the following character and are
not removed.
-s Dont echo back characters if reading from the terminal.
-q Read only one character from the terminal and set name to y if this
character was y or Y and to n otherwise. With this ag set the
return status is zero only if the character was y or Y. This option
may be used with a timeout; if the read times out, or encounters end of
Chapter 17: Shell Builtin Commands 128
le, status 2 is returned. Input is read from the terminal unless one of
-u or -p is present. This option may also be used within zle widgets.
-k [ num ] Read only one (or num) characters. All are assigned to the rst name,
without word splitting. This ag is ignored when -q is present. Input
is read from the terminal unless one of -u or -p is present. This option
may also be used within zle widgets.
Note that despite the mnemonic key this option does read full char-
acters, which may consist of multiple bytes if the option MULTIBYTE is
set.
-z Read one entry from the editor buer stack and assign it to the rst
name, without word splitting. Text is pushed onto the stack with print
-z or with push-line from the line editor (see Chapter 18 [Zsh Line
Editor], page 144). This ag is ignored when the -k or -q ags are
present.
-e
-E The input read is printed (echoed) to the standard output. If the -e
ag is used, no input is assigned to the parameters.
-A The rst name is taken as the name of an array and all words are
assigned to it.
-c
-l These ags are allowed only if called inside a function used for com-
pletion (specied with the -K ag to compctl). If the -c ag is given,
the words of the current command are read. If the -l ag is given, the
whole line is assigned as a scalar. If both ags are present, -l is used
and -c is ignored.
-n Together with -c, the number of the word the cursor is on is read. With
-l, the index of the character the cursor is on is read. Note that the
command name is word number 1, not word 0, and that when the cursor
is at the end of the line, its character index is the length of the line plus
one.
-u n Input is read from le descriptor n.
-p Input is read from the coprocess.
-d delim Input is terminated by the rst character of delim instead of by newline.
-t [ num ] Test if input is available before attempting to read. If num is present,
it must begin with a digit and will be evaluated to give a number of
seconds, which may be a oating point number; in this case the read
times out if input is not available within this time. If num is not present,
it is taken to be zero, so that read returns immediately if no input is
available. If no input is available, return status 1 and do not set any
variables.
This option is not available when reading from the editor buer with -z,
when called from within completion with -c or -l, with -q which clears
the input queue before reading, or within zle where other mechanisms
should be used to test for input.
Note that read does not attempt to alter the input processing mode.
The default mode is canonical input, in which an entire line is read at a
time, so usually read -t will not read anything until an entire line has
Chapter 17: Shell Builtin Commands 129
been typed. However, when reading from the terminal with -k input is
processed one key at a time; in this case, only availability of the rst
character is tested, so that e.g. read -t -k 2 can still block on the
second character. Use two instances of read -t -k if this is not what
is wanted.
If the rst argument contains a ?, the remainder of this word is used as a prompt
on standard error when the shell is interactive.
The value (exit status) of read is 1 when an end-of-le is encountered, or when
-c or -l is present and the command is not called from a compctl function, or as
described for -q. Otherwise the value is 0.
The behavior of some combinations of the -k, -p, -q, -u and -z ags is undened.
Presently -q cancels all the others, -p cancels -u, -k cancels -z, and otherwise -z
cancels both -p and -u.
The -c or -l ags cancel any and all of -kpquz.
readonly Same as typeset -r.
rehash Same as hash -r.
return [ n ]
Causes a shell function or . script to return to the invoking script with the return
status specied by n. If n is omitted, the return status is that of the last command
executed.
If return was executed from a trap in a TRAPNAL function, the eect is dierent for
zero and non-zero return status. With zero status (or after an implicit return at the
end of the trap), the shell will return to whatever it was previously processing; with
a non-zero status, the shell will behave as interrupted except that the return status
of the trap is retained. Note that the numeric value of the signal which caused the
trap is passed as the rst argument, so the statement return $((128+$1)) will
return the same status as if the signal had not been trapped.
sched See Section 22.21 [The zsh/sched Module], page 286.
set [ {+|-}options | {+|-}o [ option name ] ] ... [ {+|-}A [ name ] ] [ arg ... ]
Set the options for the shell and/or set the positional parameters, or declare and set
an array. If the -s option is given, it causes the specied arguments to be sorted
before assigning them to the positional parameters (or to the array name if -A is
used). With +s sort arguments in descending order. For the meaning of the other
ags, see Chapter 16 [Options], page 88. Flags may be specied by name using
the -o option. If no option name is supplied with -o, the current option states are
printed: see the description of setopt below for more information on the format.
With +o they are printed in a form that can be used as input to the shell.
If the -A ag is specied, name is set to an array containing the given args; if no
name is specied, all arrays are printed together with their values.
If +A is used and name is an array, the given arguments will replace the initial
elements of that array; if no name is specied, all arrays are printed without their
values.
The behaviour of arguments after -A name or +A name depends on whether the
option KSH_ARRAYS is set. If it is not set, all arguments following name are treated
as values for the array, regardless of their form. If the option is set, normal option
processing continues at that point; only regular arguments are treated as values for
the array. This means that
set -A array -x -- foo
Chapter 17: Shell Builtin Commands 130
sets array to -x -- foo if KSH_ARRAYS is not set, but sets the array to foo and
turns on the option -x if it is set.
If the -A ag is not present, but there are arguments beyond the options, the posi-
tional parameters are set. If the option list (if any) is terminated by --, and there
are no further arguments, the positional parameters will be unset.
If no arguments and no -- are given, then the names and values of all parameters
are printed on the standard output. If the only argument is +, the names of all
parameters are printed.
For historical reasons, set - is treated as set +xv and set - args as set +xv
-- args when in any other emulation mode than zshs native mode.
setcap See Section 22.3 [The zsh/cap Module], page 265.
setopt [ {+|-}options | {+|-}o option name ] [ name ... ]
Set the options for the shell. All options specied either with ags or by name are
set.
If no arguments are supplied, the names of all options currently set are printed.
The form is chosen so as to minimize the dierences from the default options for
the current emulation (the default emulation being native zsh, shown as <Z> in
Section 16.2 [Description of Options], page 89). Options that are on by default for
the emulation are shown with the prex no only if they are o, while other options
are shown without the prex no and only if they are on. In addition to options
changed from the default state by the user, any options activated automatically by
the shell (for example, SHIN_STDIN or INTERACTIVE) will be shown in the list. The
format is further modied by the option KSH_OPTION_PRINT, however the rationale
for choosing options with or without the no prex remains the same in this case.
If the -m ag is given the arguments are taken as patterns (which should be quoted
to protect them from lename expansion), and all options with names matching
these patterns are set.
Note that a bad option name does not cause execution of subsequent shell code to
be aborted; this is behaviour is dierent from that of set -o. This is because set
is regarded as a special builtin by the POSIX standard, but setopt is not.
shift [ -p ] [ n ] [ name ... ]
The positional parameters ${n+1} ... are renamed to $1 ..., where n is an arithmetic
expression that defaults to 1. If any names are given then the arrays with these
names are shifted instead of the positional parameters.
If the option -p is given arguments are instead removed (popped) from the end
rather than the start of the array.
source le [ arg ... ]
Same as ., except that the current directory is always searched and is always
searched rst, before directories in $path.
stat See Section 22.23 [The zsh/stat Module], page 287.
suspend [ -f ]
Suspend the execution of the shell (send it a SIGTSTP) until it receives a SIGCONT.
Unless the -f option is given, this will refuse to suspend a login shell.
test [ arg ... ]
[ [ arg ... ] ]
Like the system version of test. Added for compatibility; use conditional expres-
sions instead (see Chapter 12 [Conditional Expressions], page 30). The main dier-
ences between the conditional expression syntax and the test and [ builtins are:
Chapter 17: Shell Builtin Commands 131
these commands are not handled syntactically, so for example an empty variable
expansion may cause an argument to be omitted; syntax errors cause status 2 to be
returned instead of a shell error; and arithmetic operators expect integer arguments
rather than arithmetic expressions.
The command attempts to implement POSIX and its extensions where these are
specied. Unfortunately there are intrinsic ambiguities in the syntax; in particular
there is no distinction between test operators and strings that resemble them. The
standard attempts to resolve these for small numbers of arguments (up to four); for
ve or more arguments compatibility cannot be relied on. Users are urged wherever
possible to use the [[ test syntax which does not have these ambiguities.
times Print the accumulated user and system times for the shell and for processes run
from the shell.
trap [ arg ] [ sig ... ]
arg is a series of commands (usually quoted to protect it from immediate evaluation
by the shell) to be read and executed when the shell receives any of the signals
specied by one or more sig args. Each sig can be given as a number, or as the
name of a signal either with or without the string SIG in front (e.g. 1, HUP, and
SIGHUP are all the same signal).
If arg is -, then the specied signals are reset to their defaults, or, if no sig args
are present, all traps are reset.
If arg is an empty string, then the specied signals are ignored by the shell (and by
the commands it invokes).
If arg is omitted but one or more sig args are provided (i.e. the rst argument is a
valid signal number or name), the eect is the same as if arg had been specied as
-.
The trap command with no arguments prints a list of commands associated with
each signal.
If sig is ZERR then arg will be executed after each command with a nonzero exit
status. ERR is an alias for ZERR on systems that have no SIGERR signal (this is the
usual case).
If sig is DEBUG then arg will be executed before each command if the option
DEBUG_BEFORE_CMD is set (as it is by default), else after each command. Here, a
command is what is described as a sublist in the shell grammar, see Section 6.1
[Simple Commands & Pipelines], page 9. If DEBUG_BEFORE_CMD is set various addi-
tional features are available. First, it is possible to skip the next command by setting
the option ERR_EXIT; see the description of the ERR_EXIT option in Section 16.2 [De-
scription of Options], page 89. Also, the shell parameter ZSH_DEBUG_CMD is set to
the string corresponding to the command to be executed following the trap. Note
that this string is reconstructed from the internal format and may not be formatted
the same way as the original text. The parameter is unset after the trap is executed.
If sig is 0 or EXIT and the trap statement is executed inside the body of a function,
then the command arg is executed after the function completes. The value of $?
at the start of execution is the exit status of the shell or the return status of the
function exiting. If sig is 0 or EXIT and the trap statement is not executed inside
the body of a function, then the command arg is executed when the shell terminates;
the trap runs before any zshexit hook functions.
ZERR, DEBUG, and EXIT traps are not executed inside other traps. ZERR and DEBUG
traps are kept within subshells, while other traps are reset.
Chapter 17: Shell Builtin Commands 132
Note that traps dened with the trap builtin are slightly dierent from those dened
as TRAPNAL () { ... }, as the latter have their own function environment (line
numbers, local variables, etc.) while the former use the environment of the command
in which they were called. For example,
trap print $LINENO DEBUG
will print the line number of a command executed after it has run, while
TRAPDEBUG() { print $LINENO; }
will always print the number zero.
Alternative signal names are allowed as described under kill above. Dening a
trap under either name causes any trap under an alternative name to be removed.
However, it is recommended that for consistency users stick exclusively to one name
or another.
true [ arg ... ]
Do nothing and return an exit status of 0.
ttyctl -fu
The -f option freezes the tty, and -u unfreezes it. When the tty is frozen, no changes
made to the tty settings by external programs will be honored by the shell, except
for changes in the size of the screen; the shell will simply reset the settings to their
previous values as soon as each command exits or is suspended. Thus, stty and
similar programs have no eect when the tty is frozen. Without options it reports
whether the terminal is frozen or not.
type [ -wfpams ] name ...
Equivalent to whence -v.
typeset [ {+|-}AEFHUafghklprtuxmz ] [ -LRZi [ n ]] [ name[=value] ... ]
typeset -T [ {+|-}Urux ] [ -LRZ [ n ]] SCALAR[=value] array [ sep ]
Set or display attributes and values for shell parameters.
A parameter is created for each name that does not already refer to one. When inside
a function, a new parameter is created for every name (even those that already exist),
and is unset again when the function completes. See Section 15.4 [Local Parameters],
page 75. The same rules apply to special shell parameters, which retain their special
attributes when made local.
For each name=value assignment, the parameter name is set to value. Note that ar-
rays currently cannot be assigned in typeset expressions, only scalars and integers.
Unless the option KSH_TYPESET is set, normal expansion rules apply to assignment
arguments, so value may be split into separate words; if the option is set, assign-
ments which can be recognised when expansion is performed are treated as single
words. For example the command typeset vbl=$(echo one two) is treated as
having one argument if KSH_TYPESET is set, but otherwise is treated as having the
two arguments vbl=one and two.
If the shell option TYPESET_SILENT is not set, for each remaining name that refers
to a parameter that is set, the name and value of the parameter are printed in the
form of an assignment. Nothing is printed for newly-created parameters, or when
any attribute ags listed below are given along with the name. Using + instead of
minus to introduce an attribute turns it o.
If the -p option is given, parameters and values are printed in the form of a type-
set command and an assignment (which will be printed separately for arrays and
associative arrays), regardless of other ags and options. Note that the -h ag on
parameters is respected; no value will be shown for these parameters.
Chapter 17: Shell Builtin Commands 133
If the -T option is given, two or three arguments must be present (an exception is
that zero arguments are allowed to show the list of parameters created in this fash-
ion). The rst two are the name of a scalar and an array parameter (in that order)
that will be tied together in the manner of $PATH and $path. The optional third
argument is a single-character separator which will be used to join the elements of
the array to form the scalar; if absent, a colon is used, as with $PATH. Only the
rst character of the separator is signicant; any remaining characters are ignored.
Only the scalar parameter may be assigned an initial value. Both the scalar and
the array may otherwise be manipulated as normal. If one is unset, the other will
automatically be unset too. There is no way of untying the variables without unset-
ting them, or converting the type of one of them with another typeset command;
+T does not work, assigning an array to SCALAR is an error, and assigning a scalar
to array sets it to be a single-element array. Note that both typeset -xT ...
and export -T ... work, but only the scalar will be marked for export. Setting
the value using the scalar version causes a split on all separators (which cannot be
quoted). It is possible to use the same two tied variables with a dierent separator
character in which case the variables remain joined as before but the separator is
changed. This ag has a dierent meaning when used with -f; see below.
The -g (global) ag is treated specially: it means that any resulting parameter will
not be restricted to local scope. Note that this does not necessarily mean that the
parameter will be global, as the ag will apply to any existing parameter (even if
unset) from an enclosing function. This ag does not aect the parameter after
creation, hence it has no eect when listing existing parameters, nor does the ag
+g have any eect except in combination with -m (see below).
If no name is present, the names and values of all parameters are printed. In this
case the attribute ags restrict the display to only those parameters that have the
specied attributes, and using + rather than - to introduce the ag suppresses
printing of the values of parameters when there is no parameter name. Also, if the
last option is the word +, then names are printed but values are not.
If the -m ag is given the name arguments are taken as patterns (which should be
quoted). With no attribute ags, all parameters (or functions with the -f ag) with
matching names are printed (the shell option TYPESET_SILENT is not used in this
case). Note that -m is ignored if no patterns are given. If the +g ag is combined
with -m, a new local parameter is created for every matching parameter that is not
already local. Otherwise -m applies all other ags or assignments to the existing
parameters. Except when assignments are made with name=value, using +m forces
the matching parameters to be printed, even inside a function.
If no attribute ags are given and either no -m ag is present or the +m form was
used, each parameter name printed is preceded by a list of the attributes of that
parameter (array, association, exported, integer, readonly). If +m is used with
attribute ags, and all those ags are introduced with +, the matching parameter
names are printed but their values are not.
Attribute ags that transform the nal value (-L, -R, -Z, -l, u) are only applied
to the expanded value at the point of a parameter expansion expression using $.
They are not applied when a parameter is retrieved internally by the shell for any
purpose.
The following attribute ags may be specied:
-A The names refer to associative array parameters; see Section 15.2 [Array
Parameters], page 70.
Chapter 17: Shell Builtin Commands 134
-L Left justify and remove leading blanks from value. If n is nonzero, it
denes the width of the eld. If n is zero, the width is determined by
the width of the value of the rst assignment. In the case of numeric
parameters, the length of the complete value assigned to the parameter
is used to determine the width, not the value that would be output.
The width is the count of characters, which may be multibyte characters
if the MULTIBYTE option is in eect. Note that the screen width of the
character is not taken into account; if this is required, use padding
with parameter expansion ags ${(ml...)...} as described in Parameter
Expansion Flags in Section 14.3 [Parameter Expansion], page 43.
When the parameter is expanded, it is lled on the right with blanks
or truncated if necessary to t the eld. Note truncation can lead to
unexpected results with numeric parameters. Leading zeros are removed
if the -Z ag is also set.
-R Similar to -L, except that right justication is used; when the parameter
is expanded, the eld is left lled with blanks or truncated from the end.
May not be combined with the -Z ag.
-U For arrays (but not for associative arrays), keep only the rst occur-
rence of each duplicated value. This may also be set for colon-separated
special parameters like PATH or FIGNORE, etc. This ag has a dierent
meaning when used with -f; see below.
-Z Specially handled if set along with the -L ag. Otherwise, similar to -R,
except that leading zeros are used for padding instead of blanks if the
rst non-blank character is a digit. Numeric parameters are specially
handled: they are always eligible for padding with zeroes, and the zeroes
are inserted at an appropriate place in the output.
-a The names refer to array parameters. An array parameter may be cre-
ated this way, but it may not be assigned to in the typeset statement.
When displaying, both normal and associative arrays are shown.
-f The names refer to functions rather than parameters. No assignments
can be made, and the only other valid ags are -t, -T, -k, -u, -U and
-z. The ag -t turns on execution tracing for this function; the ag
-T does the same, but turns o tracing on any function called from the
present one, unless that function also has the -t or -T ag. The -u and
-U ags cause the function to be marked for autoloading; -U also causes
alias expansion to be suppressed when the function is loaded. The
fpath parameter will be searched to nd the function denition when
the function is rst referenced; see Chapter 9 [Functions], page 20. The
-k and -z ags make the function be loaded using ksh-style or zsh-
style autoloading respectively. If neither is given, the setting of the
KSH AUTOLOAD option determines how the function is loaded.
-h Hide: only useful for special parameters (those marked <S> in the ta-
ble in Section 15.5 [Parameters Set By The Shell], page 76), and for
local parameters with the same name as a special parameter, though
harmless for others. A special parameter with this attribute will not re-
tain its special eect when made local. Thus after typeset -h PATH,
a function containing typeset PATH will create an ordinary local pa-
rameter without the usual behaviour of PATH. Alternatively, the local
parameter may itself be given this attribute; hence inside a function
Chapter 17: Shell Builtin Commands 135
typeset -h PATH creates an ordinary local parameter and the special
PATH parameter is not altered in any way. It is also possible to create
a local parameter using typeset +h special, where the local copy of
special will retain its special properties regardless of having the -h at-
tribute. Global special parameters loaded from shell modules (currently
those in zsh/mapfile and zsh/parameter) are automatically given the
-h attribute to avoid name clashes.
-H Hide value: species that typeset will not display the value of the
parameter when listing parameters; the display for such parameters is
always as if the + ag had been given. Use of the parameter is in
other respects normal, and the option does not apply if the parameter
is specied by name, or by pattern with the -m option. This is on
by default for the parameters in the zsh/parameter and zsh/mapfile
modules. Note, however, that unlike the -h ag this is also useful for
non-special parameters.
-i Use an internal integer representation. If n is nonzero it denes the out-
put arithmetic base, otherwise it is determined by the rst assignment.
Bases from 2 to 36 inclusive are allowed.
-E Use an internal double-precision oating point representation. On out-
put the variable will be converted to scientic notation. If n is nonzero
it denes the number of signicant gures to display; the default is ten.
-F Use an internal double-precision oating point representation. On out-
put the variable will be converted to xed-point decimal notation. If n
is nonzero it denes the number of digits to display after the decimal
point; the default is ten.
-l Convert the result to lower case whenever the parameter is expanded.
The value is not converted when assigned.
-r The given names are marked readonly. Note that if name is a special
parameter, the readonly attribute can be turned on, but cannot then
be turned o.
-t Tags the named parameters. Tags have no special meaning to the shell.
This ag has a dierent meaning when used with -f; see above.
-u Convert the result to upper case whenever the parameter is expanded.
The value is not converted when assigned. This ag has a dierent
meaning when used with -f; see above.
-x Mark for automatic export to the environment of subsequently executed
commands. If the option GLOBAL_EXPORT is set, this implies the option
-g, unless +g is also explicitly given; in other words the parameter is
not made local to the enclosing function. This is for compatibility with
previous versions of zsh.
ulimit [ [ -SHacdfiklmnpqsTtvwx | -N resource [ limit ] ... ]
Set or display resource limits of the shell and the processes started by the shell.
The value of limit can be a number in the unit specied below or one of the values
unlimited, which removes the limit on the resource, or hard, which uses the
current value of the hard limit on the resource.
By default, only soft limits are manipulated. If the -H ag is given use hard limits
instead of soft limits. If the -S ag is given together with the -H ag set both hard
and soft limits.
Chapter 17: Shell Builtin Commands 136
If no options are used, the le size limit (-f) is assumed.
If limit is omitted the current value of the specied resources are printed. When
more than one resource value is printed, the limit name and unit is printed before
each value.
When looping over multiple resources, the shell will abort immediately if it detects
a badly formed argument. However, if it fails to set a limit for some other reason it
will continue trying to set the remaining limits.
Not all the following resources are supported on all systems. Running ulimit -a
will show which are supported.
-a Lists all of the current resource limits.
-b Socket buer size in bytes (N.B. not kilobytes)
-c 512-byte blocks on the size of core dumps.
-d Kilobytes on the size of the data segment.
-f 512-byte blocks on the size of les written.
-i The number of pending signals.
-k The number of kqueues allocated.
-l Kilobytes on the size of locked-in memory.
-m Kilobytes on the size of physical memory.
-n open le descriptors.
-p The number of pseudo-terminals.
-q Bytes in POSIX message queues.
-r Maximum real time priority. On some systems where this is not avail-
able, such as NetBSD, this has the same eect as -T for compatibility
with sh.
-s Kilobytes on the size of the stack.
-T The number of simultaneous threads available to the user.
-t CPU seconds to be used.
-u The number of processes available to the user.
-v Kilobytes on the size of virtual memory. On some systems this refers to
the limit called address space.
-w Kilobytes on the size of swapped out memory.
-x The number of locks on les.
A resource may also be specied by integer in the form -N resource, where resource
corresponds to the integer dened for the resource by the operating system. This
may be used to set the limits for resources known to the shell which do not cor-
respond to option letters. Such limits will be shown by number in the output of
ulimit -a.
The number may alternatively be out of the range of limits compiled into the shell.
The shell will try to read or write the limit anyway, and will report an error if this
fails.
Chapter 17: Shell Builtin Commands 137
umask [ -S ] [ mask ]
The umask is set to mask. mask can be either an octal number or a symbolic value
as described in man page chmod(1). If mask is omitted, the current value is printed.
The -S option causes the mask to be printed as a symbolic value. Otherwise, the
mask is printed as an octal number. Note that in the symbolic form the permissions
you specify are those which are to be allowed (not denied) to the users specied.
unalias Same as unhash -a.
unfunction
Same as unhash -f.
unhash [ -adfms ] name ...
Remove the element named name from an internal hash table. The default is remove
elements from the command hash table. The -a option causes unhash to remove
regular or global aliases; note when removing a global aliases that the argument
must be quoted to prevent it from being expanded before being passed to the com-
mand. The -s option causes unhash to remove sux aliases. The -f option causes
unhash to remove shell functions. The -d options causes unhash to remove named
directories. If the -m ag is given the arguments are taken as patterns (should be
quoted) and all elements of the corresponding hash table with matching names will
be removed.
unlimit [ -hs ] resource ...
The resource limit for each resource is set to the hard limit. If the -h ag is given
and the shell has appropriate privileges, the hard resource limit for each resource is
removed. The resources of the shell process are only changed if the -s ag is given.
The unlimit command is not made available by default when the shell starts in a
mode emulating another shell. It can be made available with the command zmod-
load -F zsh/rlimits b:unlimit.
unset [ -fmv ] name ...
Each named parameter is unset. Local parameters remain local even if unset; they
appear unset within scope, but the previous value will still reappear when the scope
ends.
Individual elements of associative array parameters may be unset by using subscript
syntax on name, which should be quoted (or the entire command prexed with
noglob) to protect the subscript from lename generation.
If the -m ag is specied the arguments are taken as patterns (should be quoted)
and all parameters with matching names are unset. Note that this cannot be used
when unsetting associative array elements, as the subscript will be treated as part
of the pattern.
The -v ag species that name refers to parameters. This is the default behaviour.
unset -f is equivalent to unfunction.
unsetopt [ {+|-}options | {+|-}o option name ] [ name ... ]
Unset the options for the shell. All options specied either with ags or by name
are unset. If no arguments are supplied, the names of all options currently unset are
printed. If the -m ag is given the arguments are taken as patterns (which should be
quoted to preserve them from being interpreted as glob patterns), and all options
with names matching these patterns are unset.
vared See Section 18.3 [Zle Builtins], page 146.
Chapter 17: Shell Builtin Commands 138
wait [ job ... ]
Wait for the specied jobs or processes. If job is not given then all currently active
child processes are waited for. Each job can be either a job specication or the
process ID of a job in the job table. The exit status from this command is that of
the job waited for.
whence [ -vcwfpams ] name ...
For each name, indicate how it would be interpreted if used as a command name.
-v Produce a more verbose report.
-c Print the results in a csh-like format. This takes precedence over -v.
-w For each name, print name: word where word is one of alias,
builtin, command, function, hashed, reserved or none, according
as name corresponds to an alias, a built-in command, an external com-
mand, a shell function, a command dened with the hash builtin, a
reserved word, or is not recognised. This takes precedence over -v and
-c.
-f Causes the contents of a shell function to be displayed, which would
otherwise not happen unless the -c ag were used.
-p Do a path search for name even if it is an alias, reserved word, shell
function or builtin.
-a Do a search for all occurrences of name throughout the command path.
Normally only the rst occurrence is printed.
-m The arguments are taken as patterns (should be quoted), and the infor-
mation is displayed for each command matching one of these patterns.
-s If a pathname contains symlinks, print the symlink-free pathname as
well.
where [ -wpms ] name ...
Equivalent to whence -ca.
which [ -wpams ] name ...
Equivalent to whence -c.
zcompile [ -U ] [ -z | -k ] [ -R | -M ] le [ name ... ]
zcompile -ca [ -m ] [ -R | -M ] le [ name ... ]
zcompile -t le [ name ... ]
This builtin command can be used to compile functions or scripts, storing the com-
piled form in a le, and to examine les containing the compiled form. This allows
faster autoloading of functions and execution of scripts by avoiding parsing of the
text when the les are read.
The rst form (without the -c, -a or -t options) creates a compiled le. If only
the le argument is given, the output le has the name le.zwc and will be placed
in the same directory as the le. The shell will load the compiled le instead of
the normal function le when the function is autoloaded; see Chapter 9 [Functions],
page 20 for a description of how autoloaded functions are searched. The extension
.zwc stands for zsh word code.
If there is at least one name argument, all the named les are compiled into the
output le given as the rst argument. If le does not end in .zwc, this extension
is automatically appended. Files containing multiple compiled functions are called
digest les, and are intended to be used as elements of the FPATH/fpath special
array.
Chapter 17: Shell Builtin Commands 139
The second form, with the -c or -a options, writes the compiled denitions for all
the named functions into le. For -c, the names must be functions currently dened
in the shell, not those marked for autoloading. Undened functions that are marked
for autoloading may be written by using the -a option, in which case the fpath
is searched and the contents of the denition les for those functions, if found, are
compiled into le. If both -c and -a are given, names of both dened functions and
functions marked for autoloading may be given. In either case, the functions in les
written with the -c or -a option will be autoloaded as if the KSH_AUTOLOAD option
were unset.
The reason for handling loaded and not-yet-loaded functions with dierent options
is that some denition les for autoloading dene multiple functions, including the
function with the same name as the le, and, at the end, call that function. In such
cases the output of zcompile -c does not include the additional functions dened
in the le, and any other initialization code in the le is lost. Using zcompile -a
captures all this extra information.
If the -m option is combined with -c or -a, the names are used as patterns and all
functions whose names match one of these patterns will be written. If no name is
given, the denitions of all functions currently dened or marked as autoloaded will
be written.
The third form, with the -t option, examines an existing compiled le. Without
further arguments, the names of the original les compiled into it are listed. The
rst line of output shows the version of the shell which compiled the le and how
the le will be used (i.e. by reading it directly or by mapping it into memory). With
arguments, nothing is output and the return status is set to zero if denitions for
all names were found in the compiled le, and non-zero if the denition for at least
one name was not found.
Other options:
-U Aliases are not expanded when compiling the named les.
-R When the compiled le is read, its contents are copied into the shells
memory, rather than memory-mapped (see -M). This happens automat-
ically on systems that do not support memory mapping.
When compiling scripts instead of autoloadable functions, it is often de-
sirable to use this option; otherwise the whole le, including the code to
dene functions which have already been dened, will remain mapped,
consequently wasting memory.
-M The compiled le is mapped into the shells memory when read. This is
done in such a way that multiple instances of the shell running on the
same host will share this mapped le. If neither -R nor -M is given, the
zcompile builtin decides what to do based on the size of the compiled
le.
-k
-z These options are used when the compiled le contains functions which
are to be autoloaded. If -z is given, the function will be autoloaded
as if the KSH_AUTOLOAD option is not set, even if it is set at the time
the compiled le is read, while if the -k is given, the function will be
loaded as if KSH_AUTOLOAD is set. These options also take precedence
over any -k or -z options specied to the autoload builtin. If neither
of these options is given, the function will be loaded as determined by
the setting of the KSH_AUTOLOAD option at the time the compiled le is
read.
Chapter 17: Shell Builtin Commands 140
These options may also appear as many times as necessary between the
listed names to specify the loading style of all following functions, up
to the next -k or -z.
The created le always contains two versions of the compiled format, one for big-
endian machines and one for small-endian machines. The upshot of this is that the
compiled le is machine independent and if it is read or mapped, only one half of
the le is actually used (and mapped).
zformat See Section 22.34 [The zsh/zutil Module], page 304.
zftp See Section 22.28 [The zsh/zftp Module], page 294.
zle See Section 18.3 [Zle Builtins], page 146.
zmodload [ -dL ] [ ... ]
zmodload -F [ -lLme -P param ] module [+-]feature...
zmodload -e [ -A ] [ ... ]
zmodload [ -a [ -bcpf [ -I ] ] ] [ -iL ] ...
zmodload -u [ -abcdpf [ -I ] ] [ -iL ] ...
zmodload -A [ -L ] [ modalias[=module] ... ]
zmodload -R modalias ...
Performs operations relating to zshs loadable modules. Loading of modules while
the shell is running (dynamical loading) is not available on all operating systems,
or on all installations on a particular operating system, although the zmodload
command itself is always available and can be used to manipulate modules built
into versions of the shell executable without dynamical loading.
Without arguments the names of all currently loaded binary modules are printed.
The -L option causes this list to be in the form of a series of zmodload commands.
Forms with arguments are:
zmodload [ -i ] name ...
zmodload -u [ -i ] name ...
In the simplest case, zmodload loads a binary module. The module
must be in a le with a name consisting of the specied name followed
by a standard sux, usually .so (.sl on HPUX). If the module to be
loaded is already loaded the duplicate module is ignored. If zmodload
detects an inconsistency, such as an invalid module name or circular
dependency list, the current code block is aborted. Hence zmodload
module 2>/dev/null is sucient to test whether a module is available.
If it is available, the module is loaded if necessary, while if it is not
available, non-zero status is silently returned. The option -i is accepted
for compatibility but has no eect.
The named module is searched for in the same way a command is, using
$module_path instead of $path. However, the path search is performed
even when the module name contains a /, which it usually does. There
is no way to prevent the path search.
If the module supports features (see below), zmodload tries to enable all
features when loading a module. If the module was successfully loaded
but not all features could be enabled, zmodload returns status 2.
With -u, zmodload unloads modules. The same name must be given
that was given when the module was loaded, but it is not necessary for
the module to exist in the le system. The -i option suppresses the
error if the module is already unloaded (or was never loaded).
Chapter 17: Shell Builtin Commands 141
Each module has a boot and a cleanup function. The module will not
be loaded if its boot function fails. Similarly a module can only be
unloaded if its cleanup function runs successfully.
zmodload -F [ -almLe -P param ] module [+-]feature...
zmodload -F allows more selective control over the features provided
by modules. With no options apart from -F, the module named module
is loaded, if it was not already loaded, and the list of features is set to
the required state. If no features are specied, the module is loaded,
if it was not already loaded, but the state of features is unchanged.
Each feature may be preceded by a + to turn the feature on, or - to
turn it o; the + is assumed if neither character is present. Any feature
not explicitly mentioned is left in its current state; if the module was
not previously loaded this means any such features will remain disabled.
The return status is zero if all features were set, 1 if the module failed to
load, and 2 if some features could not be set (for example, a parameter
couldnt be added because there was a dierent parameter of the same
name) but the module was loaded.
The standard features are builtins, conditions, parameters and math
functions; these are indicated by the prex b:, c: (C: for an inx
condition), p: and f:, respectively, followed by the name that the cor-
responding feature would have in the shell. For example, b:strftime
indicates a builtin named strftime and p:EPOCHSECONDS indicates a
parameter named EPOCHSECONDS. The module may provide other (ab-
stract) features of its own as indicated by its documentation; these have
no prex.
With -l or -L, features provided by the module are listed. With -l
alone, a list of features together with their states is shown, one feature
per line. With -L alone, a zmodload -F command that would cause
enabled features of the module to be turned on is shown. With -lL, a
zmodload -F command that would cause all the features to be set to
their current state is shown. If one of these combinations is given the
option -P param then the parameter param is set to an array of features,
either features together with their state or (if -L alone is given) enabled
features.
With the option -L the module name may be omitted; then a list of
all enabled features for all modules providing features is printed in the
form of zmodload -F commands. If -l is also given, the state of both
enabled and disabled features is output in that form.
A set of features may be provided together with -l or -L and a module
name; in that case only the state of those features is considered. Each
feature may be preceded by + or - but the character has no eect. If
no set of features is provided, all features are considered.
With -e, the command rst tests that the module is loaded; if it is not,
status 1 is returned. If the module is loaded, the list of features given
as an argument is examined. Any feature given with no prex is simply
tested to see if the module provides it; any feature given with a prex
+ or - is tested to see if is provided and in the given state. If the tests
on all features in the list succeed, status 0 is returned, else status 1.
With -m, each entry in the given list of features is taken as a pattern
to be matched against the list of features provided by the module. An
Chapter 17: Shell Builtin Commands 142
initial + or - must be given explicitly. This may not be combined with
the -a option as autoloads must be specied explicitly.
With -a, the given list of features is marked for autoload from the
specied module, which may not yet be loaded. An optional + may
appear before the feature name. If the feature is prexed with -, any
existing autoload is removed. The options -l and -L may be used
to list autoloads. Autoloading is specic to individual features; when
the module is loaded only the requested feature is enabled. Autoload
requests are preserved if the module is subsequently unloaded until an
explicit zmodload -Fa module -feature is issued. It is not an error to
request an autoload for a feature of a module that is already loaded.
When the module is loaded each autoload is checked against the fea-
tures actually provided by the module; if the feature is not provided
the autoload request is deleted. A warning message is output; if the
module is being loaded to provide a dierent feature, and that autoload
is successful, there is no eect on the status of the current command.
If the module is already loaded at the time when zmodload -Fa is run,
an error message is printed and status 1 returned.
zmodload -Fa can be used with the -l, -L, -e and -P options for listing
and testing the existence of autoloadable features. In this case -l is
ignored if -L is specied. zmodload -FaL with no module name lists
autoloads for all modules.
Note that only standard features as described above can be autoloaded;
other features require the module to be loaded before enabling.
zmodload -d [ -L ] [ name ]
zmodload -d name dep ...
zmodload -ud name [ dep ... ]
The -d option can be used to specify module dependencies. The modules
named in the second and subsequent arguments will be loaded before
the module named in the rst argument.
With -d and one argument, all dependencies for that module are listed.
With -d and no arguments, all module dependencies are listed. This
listing is by default in a Makele-like format. The -L option changes
this format to a list of zmodload -d commands.
If -d and -u are both used, dependencies are removed. If only one
argument is given, all dependencies for that module are removed.
zmodload -ab [ -L ]
zmodload -ab [ -i ] name [ builtin ... ]
zmodload -ub [ -i ] builtin ...
The -ab option denes autoloaded builtins. It denes the specied
builtins. When any of those builtins is called, the module specied
in the rst argument is loaded and all its features are enabled (for
selective control of features use zmodload -F -a as described above).
If only the name is given, one builtin is dened, with the same name
as the module. -i suppresses the error if the builtin is already dened
or autoloaded, but not if another builtin of the same name is already
dened.
With -ab and no arguments, all autoloaded builtins are listed, with the
module name (if dierent) shown in parentheses after the builtin name.
The -L option changes this format to a list of zmodload -a commands.
Chapter 17: Shell Builtin Commands 143
If -b is used together with the -u option, it removes builtins previously
dened with -ab. This is only possible if the builtin is not yet loaded. -i
suppresses the error if the builtin is already removed (or never existed).
Autoload requests are retained if the module is subsequently unloaded
until an explicit zmodload -ub builtin is issued.
zmodload -ac [ -IL ]
zmodload -ac [ -iI ] name [ cond ... ]
zmodload -uc [ -iI ] cond ...
The -ac option is used to dene autoloaded condition codes. The cond
strings give the names of the conditions dened by the module. The
optional -I option is used to dene inx condition names. Without this
option prex condition names are dened.
If given no condition names, all dened names are listed (as a series of
zmodload commands if the -L option is given).
The -uc option removes denitions for autoloaded conditions.
zmodload -ap [ -L ]
zmodload -ap [ -i ] name [ parameter ... ]
zmodload -up [ -i ] parameter ...
The -p option is like the -b and -c options, but makes zmodload work
on autoloaded parameters instead.
zmodload -af [ -L ]
zmodload -af [ -i ] name [ function ... ]
zmodload -uf [ -i ] function ...
The -f option is like the -b, -p, and -c options, but makes zmodload
work on autoloaded math functions instead.
zmodload -a [ -L ]
zmodload -a [ -i ] name [ builtin ... ]
zmodload -ua [ -i ] builtin ...
Equivalent to -ab and -ub.
zmodload -e [ -A ] [ string ... ]
The -e option without arguments lists all loaded modules; if the -A
option is also given, module aliases corresponding to loaded modules
are also shown. If arguments are provided, nothing is printed; the re-
turn status is set to zero if all strings given as arguments are names of
loaded modules and to one if at least on string is not the name of a
loaded module. This can be used to test for the availability of things
implemented by modules. In this case, any aliases are automatically
resolved and the -A ag is not used.
zmodload -A [ -L ] [ modalias[=module] ... ]
For each argument, if both modalias and module are given, dene
modalias to be an alias for the module module. If the module modalias
is ever subsequently requested, either via a call to zmodload or implic-
itly, the shell will attempt to load module instead. If module is not
given, show the denition of modalias. If no arguments are given, list
all dened module aliases. When listing, if the -L ag was also given,
list the denition as a zmodload command to recreate the alias.
The existence of aliases for modules is completely independent of
whether the name resolved is actually loaded as a module: while the
Chapter 18: Zsh Line Editor 144
alias exists, loading and unloading the module under any alias has ex-
actly the same eect as using the resolved name, and does not aect
the connection between the alias and the resolved name which can be
removed either by zmodload -R or by redening the alias. Chains of
aliases (i.e. where the rst resolved name is itself an alias) are valid so
long as these are not circular. As the aliases take the same format as
module names, they may include path separators: in this case, there is
no requirement for any part of the path named to exist as the alias will
be resolved rst. For example, any/old/alias is always a valid alias.
Dependencies added to aliased modules are actually added to the re-
solved module; these remain if the alias is removed. It is valid to create
an alias whose name is one of the standard shell modules and which
resolves to a dierent module. However, if a module has dependencies,
it will not be possible to use the module name as an alias as the module
will already be marked as a loadable module in its own right.
Apart from the above, aliases can be used in the zmodload command
anywhere module names are required. However, aliases will not be
shown in lists of loaded modules with a bare zmodload.
zmodload -R modalias ...
For each modalias argument that was previously dened as a module
alias via zmodload -A, delete the alias. If any was not dened, an error
is caused and the remainder of the line is ignored.
Note that zsh makes no distinction between modules that were linked into the shell
and modules that are loaded dynamically. In both cases this builtin command has to
be used to make available the builtins and other things dened by modules (unless
the module is autoloaded on these denitions). This is true even for systems that
dont support dynamic loading of modules.
zparseopts
See Section 22.34 [The zsh/zutil Module], page 304.
zprof See Section 22.31 [The zsh/zprof Module], page 301.
zpty See Section 22.32 [The zsh/zpty Module], page 302.
zregexparse
See Section 22.34 [The zsh/zutil Module], page 304.
zsocket See Section 22.22 [The zsh/net/socket Module], page 287.
zstyle See Section 22.34 [The zsh/zutil Module], page 304.
ztcp See Section 22.25 [The zsh/net/tcp Module], page 292.
18 Zsh Line Editor
18.1 Description
If the ZLE option is set (which it is by default in interactive shells) and the shell input is attached
to the terminal, the user is able to edit command lines.
There are two display modes. The rst, multiline mode, is the default. It only works if the TERM
parameter is set to a valid terminal type that can move the cursor up. The second, single line
Chapter 18: Zsh Line Editor 145
mode, is used if TERM is invalid or incapable of moving the cursor up, or if the SINGLE_LINE_ZLE
option is set. This mode is similar to ksh, and uses no termcap sequences. If TERM is "emacs",
the ZLE option will be unset by default.
The parameters BAUD, COLUMNS, and LINES are also used by the line editor. Section 15.6 [Pa-
rameters Used By The Shell], page 80.
The parameter zle_highlight is also used by the line editor; Section 18.7 [Character High-
lighting], page 173. Highlighting of special characters and the region between the cursor and
the mark (as set with set-mark-command in Emacs mode) is enabled by default; consult this
reference for more information. Irascible conservatives will wish to know that all highlighting
may be disabled by the following setting:
zle_highlight=(none)
18.2 Keymaps
A keymap in ZLE contains a set of bindings between key sequences and ZLE commands. The
empty key sequence cannot be bound.
There can be any number of keymaps at any time, and each keymap has one or more names. If
all of a keymaps names are deleted, it disappears. bindkey can be used to manipulate keymap
names.
Initially, there are six keymaps:
emacs EMACS emulation
viins vi emulation - insert mode
vicmd vi emulation - command mode
isearch incremental search mode
command read a command name
.safe fallback keymap
The .safe keymap is special. It can never be altered, and the name can never be removed.
However, it can be linked to other names, which can be removed. In the future other special
keymaps may be added; users should avoid using names beginning with . for their own keymaps.
In addition to these names, either emacs or viins is also linked to the name main. If one
of the VISUAL or EDITOR environment variables contain the string vi when the shell starts up
then it will be viins, otherwise it will be emacs. bindkeys -e and -v options provide a
convenient way to override this default choice.
When the editor starts up, it will select the main keymap. If that keymap doesnt exist, it will
use .safe instead.
In the .safe keymap, each single key is bound to self-insert, except for ^J (line feed) and
^M (return) which are bound to accept-line. This is deliberately not pleasant to use; if you
are using it, it means you deleted the main keymap, and you should put it back.
18.2.1 Reading Commands
When ZLE is reading a command from the terminal, it may read a sequence that is bound to
some command and is also a prex of a longer bound string. In this case ZLE will wait a certain
time to see if more characters are typed, and if not (or they dont match any longer string) it
will execute the binding. This timeout is dened by the KEYTIMEOUT parameter; its default is
0.4 sec. There is no timeout if the prex string is not itself bound to a command.
The key timeout is also applied when ZLE is reading the bytes from a multibyte character string
when it is in the appropriate mode. (This requires that the shell was compiled with multibyte
Chapter 18: Zsh Line Editor 146
mode enabled; typically also the locale has characters with the UTF-8 encoding, although any
multibyte encoding known to the operating system is supported.) If the second or a subsequent
byte is not read within the timeout period, the shell acts as if ? were typed and resets the input
state.
As well as ZLE commands, key sequences can be bound to other strings, by using bindkey
-s. When such a sequence is read, the replacement string is pushed back as input, and the
command reading process starts again using these fake keystrokes. This input can itself invoke
further replacement strings, but in order to detect loops the process will be stopped if there are
twenty such replacements without a real command being read.
A key sequence typed by the user can be turned into a command name for use in user-dened
widgets with the read-command widget, described in Section 18.6.6 [Miscellaneous], page 169
below.
18.3 Zle Builtins
The ZLE module contains three related builtin commands. The bindkey command manipulates
keymaps and key bindings; the vared command invokes ZLE on the value of a shell parameter;
and the zle command manipulates editing widgets and allows command line access to ZLE
commands from within shell functions.
bindkey [ options ] -l [ -L ] [ keymap ... ]
bindkey [ options ] -d
bindkey [ options ] -D keymap ...
bindkey [ options ] -A old-keymap new-keymap
bindkey [ options ] -N new-keymap [ old-keymap ]
bindkey [ options ] -m
bindkey [ options ] -r in-string ...
bindkey [ options ] -s in-string out-string ...
bindkey [ options ] in-string command ...
bindkey [ options ] [ in-string ]
bindkeys options can be divided into three categories: keymap selection for the
current command, operation selection, and others. The keymap selection options
are:
-e Selects keymap emacs for any operations by the current command,
and also links emacs to main so that it is selected by default the next
time the editor starts.
-v Selects keymap viins for any operations by the current command,
and also links viins to main so that it is selected by default the next
time the editor starts.
-a Selects keymap vicmd for any operations by the current command.
-M keymap
The keymap species a keymap name that is selected for any operations
by the current command.
If a keymap selection is required and none of the options above are used, the main
keymap is used. Some operations do not permit a keymap to be selected, namely:
-l List all existing keymap names; if any arguments are given, list just
those keymaps.
If the -L option is also used, list in the form of bindkey commands to
create or link the keymaps. bindkey -lL main shows which keymap is
linked to main, if any, and hence if the standard emacs or vi emulation
Chapter 18: Zsh Line Editor 147
is in eect. This option does not show the .safe keymap because it
cannot be created in that fashion; however, neither is bindkey -lL
.safe reported as an error, it simply outputs nothing.
-d Delete all existing keymaps and reset to the default state.
-D keymap ...
Delete the named keymaps.
-A old-keymap new-keymap
Make the new-keymap name an alias for old-keymap, so that both names
refer to the same keymap. The names have equal standing; if either is
deleted, the other remains. If there is already a keymap with the new-
keymap name, it is deleted.
-N new-keymap [ old-keymap ]
Create a new keymap, named new-keymap. If a keymap already has
that name, it is deleted. If an old-keymap name is given, the new
keymap is initialized to be a duplicate of it, otherwise the new keymap
will be empty.
To use a newly created keymap, it should be linked to main. Hence the sequence
of commands to create and use a new keymap mymap initialized from the emacs
keymap (which remains unchanged) is:
bindkey -N mymap emacs
bindkey -A mymap main
Note that while bindkey -A newmap main will work when newmap is emacs or
viins, it will not work for vicmd, as switching from vi insert to command mode
becomes impossible.
The following operations act on the main keymap if no keymap selection option
was given:
-m Add the built-in set of meta-key bindings to the selected keymap. Only
keys that are unbound or bound to self-insert are aected.
-r in-string ...
Unbind the specied in-strings in the selected keymap. This is exactly
equivalent to binding the strings to undefined-key.
When -R is also used, interpret the in-strings as ranges.
When -p is also used, the in-strings specify prexes. Any binding that
has the given in-string as a prex, not including the binding for the
in-string itself, if any, will be removed. For example,
bindkey -rpM viins ^[
will remove all bindings in the vi-insert keymap beginning with an es-
cape character (probably cursor keys), but leave the binding for the
escape character itself (probably vi-cmd-mode). This is incompatible
with the option -R.
-s in-string out-string ...
Bind each in-string to each out-string. When in-string is typed, out-
string will be pushed back and treated as input to the line editor. When
-R is also used, interpret the in-strings as ranges.
Note that both in-string and out-string are subject to the same form of
interpretation, as described below.
Chapter 18: Zsh Line Editor 148
in-string command ...
Bind each in-string to each command. When -R is used, interpret the
in-strings as ranges.
[ in-string ]
List key bindings. If an in-string is specied, the binding of that string
in the selected keymap is displayed. Otherwise, all key bindings in
the selected keymap are displayed. (As a special case, if the -e or -v
option is used alone, the keymap is not displayed - the implicit linking
of keymaps is the only thing that happens.)
When the option -p is used, the in-string must be present. The listing
shows all bindings which have the given key sequence as a prex, not
including any bindings for the key sequence itself.
When the -L option is used, the list is in the form of bindkey commands
to create the key bindings.
When the -R option is used as noted above, a valid range consists of two charac-
ters, with an optional - between them. All characters between the two specied,
inclusive, are bound as specied.
For either in-string or out-string, the following escape sequences are recognised:
\a bell character
\b backspace
\e, \E escape
\f form feed
\n linefeed (newline)
\r carriage return
\t horizontal tab
\v vertical tab
\NNN character code in octal
\xNN character code in hexadecimal
\M[-]X character with meta bit set
\C[-]X control character
^X control character
In all other cases, \ escapes the following character. Delete is written as ^?.
Note that \M^? and ^\M? are not the same, and that (unlike emacs), the bindings
\M-X and \eX are entirely distinct, although they are initialized to the same
bindings by bindkey -m.
vared [ -Aache ] [ -p prompt ] [ -r rprompt ]
[ -M main-keymap ] [ -m vicmd-keymap ]
[ -i init-widget ] [ -f nish-widget ]
[ -t tty ] name
The value of the parameter name is loaded into the edit buer, and the line editor
is invoked. When the editor exits, name is set to the string value returned by the
editor. When the -c ag is given, the parameter is created if it doesnt already
exist. The -a ag may be given with -c to create an array parameter, or the -A ag
Chapter 18: Zsh Line Editor 149
to create an associative array. If the type of an existing parameter does not match
the type to be created, the parameter is unset and recreated.
If an array or array slice is being edited, separator characters as dened in $IFS will
be shown quoted with a backslash, as will backslashes themselves. Conversely, when
the edited text is split into an array, a backslash quotes an immediately following
separator character or backslash; no other special handling of backslashes, or any
handling of quotes, is performed.
Individual elements of existing array or associative array parameters may be edited
by using subscript syntax on name. New elements are created automatically, even
without -c.
If the -p ag is given, the following string will be taken as the prompt to display
at the left. If the -r ag is given, the following string gives the prompt to display
at the right. If the -h ag is specied, the history can be accessed from ZLE. If
the -e ag is given, typing ^D (Control-D) on an empty line causes vared to exit
immediately with a non-zero return value.
The -M option gives a keymap to link to the main keymap during editing, and the
-m option gives a keymap to link to the vicmd keymap during editing. For vi-style
editing, this allows a pair of keymaps to override viins and vicmd. For emacs-style
editing, only -M is normally needed but the -m option may still be used. On exit,
the previous keymaps will be restored.
Vared calls the usual zle-line-init and zle-line-finish hooks before and
after it takes control. Using the -i and -f options, it is possible to replace these
with other custom widgets.
If -t tty is given, tty is the name of a terminal device to be used instead of the
default /dev/tty. If tty does not refer to a terminal an error is reported.
zle
zle -l [ -L | -a ] [ string ... ]
zle -D widget ...
zle -A old-widget new-widget
zle -N widget [ function ]
zle -C widget completion-widget function
zle -R [ -c ] [ display-string ] [ string ... ]
zle -M string
zle -U string
zle -K keymap
zle -F [ -L | -w ] [ fd [ handler ] ]
zle -I
zle -T [ tc function | -r tc | -L ]
zle widget [ -n num ] [ -Nw ] [ -K keymap ] args ...
The zle builtin performs a number of dierent actions concerning ZLE.
With no options and no arguments, only the return status will be set. It is zero if
ZLE is currently active and widgets could be invoked using this builtin command
and non-zero otherwise. Note that even if non-zero status is returned, zle may still
be active as part of the completion system; this does not allow direct calls to ZLE
widgets.
Otherwise, which operation it performs depends on its options:
-l [ -L | -a ]
List all existing user-dened widgets. If the -L option is used, list in
the form of zle commands to create the widgets.
Chapter 18: Zsh Line Editor 150
When combined with the -a option, all widget names are listed, includ-
ing the builtin ones. In this case the -L option is ignored.
If at least one string is given, and -a is present or -L is not used, nothing
will be printed. The return status will be zero if all strings are names
of existing widgets and non-zero if at least one string is not a name of a
dened widget. If -a is also present, all widget names are used for the
comparison including builtin widgets, else only user-dened widgets are
used.
If at least one string is present and the -L option is used, user-dened
widgets matching any string are listed in the form of zle commands to
create the widgets.
-D widget ...
Delete the named widgets.
-A old-widget new-widget
Make the new-widget name an alias for old-widget, so that both names
refer to the same widget. The names have equal standing; if either is
deleted, the other remains. If there is already a widget with the new-
widget name, it is deleted.
-N widget [ function ]
Create a user-dened widget. If there is already a widget with the
specied name, it is overwritten. When the new widget is invoked from
within the editor, the specied shell function is called. If no function
name is specied, it defaults to the same name as the widget. For further
information, see the section Widgets in Chapter 18 [Zsh Line Editor],
page 144.
-C widget completion-widget function
Create a user-dened completion widget named widget. The comple-
tion widget will behave like the built-in completion-widget whose name
is given as completion-widget. To generate the completions, the shell
function function will be called. For further information, see Chapter 19
[Completion Widgets], page 176.
-R [ -c ] [ display-string ] [ string ... ]
Redisplay the command line; this is to be called from within a user-
dened widget to allow changes to become visible. If a display-string
is given and not empty, this is shown in the status line (immediately
below the line being edited).
If the optional strings are given they are listed below the prompt in the
same way as completion lists are printed. If no strings are given but
the -c option is used such a list is cleared.
Note that this option is only useful for widgets that do not exit im-
mediately after using it because the strings displayed will be erased
immediately after return from the widget.
This command can safely be called outside user dened widgets; if zle
is active, the display will be refreshed, while if zle is not active, the
command has no eect. In this case there will usually be no other
arguments.
The status is zero if zle was active, else one.
-M string As with the -R option, the string will be displayed below the command
line; unlike the -R option, the string will not be put into the status line
Chapter 18: Zsh Line Editor 151
but will instead be printed normally below the prompt. This means
that the string will still be displayed after the widget returns (until it
is overwritten by subsequent commands).
-U string This pushes the characters in the string onto the input stack of ZLE.
After the widget currently executed nishes ZLE will behave as if the
characters in the string were typed by the user.
As ZLE uses a stack, if this option is used repeatedly the last string
pushed onto the stack will be processed rst. However, the characters
in each string will be processed in the order in which they appear in the
string.
-K keymap
Selects the keymap named keymap. An error message will be displayed
if there is no such keymap.
This keymap selection aects the interpretation of following keystrokes
within this invocation of ZLE. Any following invocation (e.g., the next
command line) will start as usual with the main keymap selected.
-F [ -L | -w ] [ fd [ handler ] ]
Only available if your system supports one of the poll or select system
calls; most modern systems do.
Installs handler (the name of a shell function) to handle input from le
descriptor fd. Installing a handler for an fd which is already handled
causes the existing handler to be replaced. Any number of handlers for
any number of readable le descriptors may be installed. Note that zle
makes no attempt to check whether this fd is actually readable when
installing the handler. The user must make their own arrangements for
handling the le descriptor when zle is not active.
When zle is attempting to read data, it will examine both the terminal
and the list of handled fds. If data becomes available on a handled
fd, zle calls handler with the fd which is ready for reading as the rst
argument. Under normal circumstances this is the only argument, but
if an error was detected, a second argument provides details: hup for a
disconnect, nval for a closed or otherwise invalid descriptor, or err
for any other condition. Systems that support only the select system
call always use err.
If the option -w is also given, the handler is instead a line editor widget,
typically a shell function made into a widget using zle -N. In that case
handler can use all the facilities of zle to update the current editing line.
Note, however, that as handling fd takes place at a low level changes to
the display will not automatically appear; the widget should call zle
-R to force redisplay. As of this writing, widget handlers only support
a single argument and thus are never passed a string for error state, so
widgets must be prepared to test the descriptor themselves.
If either type of handler produces output to the terminal, it should call
zle -I before doing so (see below). Handlers should not attempt to
read from the terminal.
If no handler is given, but an fd is present, any handler for that fd is
removed. If there is none, an error message is printed and status 1 is
returned.
Chapter 18: Zsh Line Editor 152
If no arguments are given, or the -L option is supplied, a list of handlers
is printed in a form which can be stored for later execution.
An fd (but not a handler) may optionally be given with the -L option;
in this case, the function will list the handler if any, else silently return
status 1.
Note that this feature should be used with care. Activity on one of the
fds which is not properly handled can cause the terminal to become
unusable. Removing an fd handler from within a signal trap may cause
unpredictable behavior.
Here is a simple example of using this feature. A connection to a remote
TCP port is created using the ztcp command; see Section 22.25 [The
zsh/net/tcp Module], page 292. Then a handler is installed which simply
prints out any data which arrives on this connection. Note that select
will indicate that the le descriptor needs handling if the remote side
has closed the connection; we handle that by testing for a failed read.
if ztcp pwspc 2811; then
tcpfd=$REPLY
handler() {
zle -I
local line
if ! read -r line <&$1; then
# select marks this fd if we reach EOF,
# so handle this specially.
print "[Read on fd $1 failed, removing.]" >&2
zle -F $1
return 1
fi
print -r - $line
}
zle -F $tcpfd handler
fi
-I Unusually, this option is most useful outside ordinary widget functions,
though it may be used within if normal output to the terminal is re-
quired. It invalidates the current zle display in preparation for output;
typically this will be from a trap function. It has no eect if zle is not
active. When a trap exits, the shell checks to see if the display needs
restoring, hence the following will print output in such a way as not to
disturb the line being edited:
TRAPUSR1() {
# Invalidate zle display
[[ -o zle ]] && zle -I
# Show output
print Hello
}
In general, the trap function may need to test whether zle is active before
using this method (as shown in the example), since the zsh/zle module
may not even be loaded; if it is not, the command can be skipped.
It is possible to call zle -I several times before control is returned to
the editor; the display will only be invalidated the rst time to minimise
disruption.
Chapter 18: Zsh Line Editor 153
Note that there are normally better ways of manipulating the display
from within zle widgets; see, for example, zle -R above.
The returned status is zero if zle was invalidated, even though this may
have been by a previous call to zle -I or by a system notication.
To test if a zle widget may be called at this point, execute zle with no
arguments and examine the return status.
-T This is used to add, list or remove internal transformations on the pro-
cessing performed by the line editor. It is typically used only for debug-
ging or testing and is therefore of little interest to the general user.
zle -T transformation func species that the given transformation
(see below) is eected by shell function func.
zle -Tr transformation removes the given transformation if it was
present (it is not an error if none was).
zle -TL can be used to list all transformations currently in operation.
Currently the only transformation is tc. This is used instead of out-
putting termcap codes to the terminal. When the transformation is in
operation the shell function is passed the termcap code that would be
output as its rst argument; if the operation required a numeric argu-
ment, that is passed as a second argument. The function should set the
shell variable REPLY to the transformed termcap code. Typically this is
used to produce some simply formatted version of the code and optional
argument for debugging or testing. Note that this transformation is not
applied to other non-printing characters such as carriage returns and
newlines.
widget [ -n num ] [ -Nw ] [ -K keymap ] args ...
Invoke the specied widget. This can only be done when ZLE is active;
normally this will be within a user-dened widget.
With the options -n and -N, the current numerical argument will be
saved and then restored after the call to widget; -n num sets the
numerical argument temporarily to num, while -N sets it to the default,
i.e. as if there were none.
With the option -K, keymap will be used as the current keymap during
the execution of the widget. The previous keymap will be restored when
the widget exits.
Normally, calling a widget in this way does not set the special parameter
WIDGET and related parameters, so that the environment appears as if
the top-level widget called by the user were still active. With the option
-w, WIDGET and related parameters are set to reect the widget being
executed by the zle call.
Any further arguments will be passed to the widget; note that as stan-
dard argument handling is performed, any general argument list should
be preceded by --. If it is a shell function, these are passed down as
positional parameters; for builtin widgets it is up to the widget in ques-
tion what it does with them. Currently arguments are only handled by
the incremental-search commands, the history-search-forward and
-backward and the corresponding functions prexed by vi-, and by
universal-argument. No error is agged if the command does not use
the arguments, or only uses some of them.
Chapter 18: Zsh Line Editor 154
The return status reects the success or failure of the operation carried
out by the widget, or if it is a user-dened widget the return status of
the shell function.
A non-zero return status causes the shell to beep when the widget exits,
unless the BEEP options was unset or the widget was called via the zle
command. Thus if a user dened widget requires an immediate beep, it
should call the beep widget directly.
18.4 Widgets
All actions in the editor are performed by widgets. A widgets job is simply to perform some
small action. The ZLE commands that key sequences in keymaps are bound to are in fact
widgets. Widgets can be user-dened or built in.
The standard widgets built into ZLE are listed in Standard Widgets below. Other built-in
widgets can be dened by other modules (see Chapter 22 [Zsh Modules], page 263). Each built-
in widget has two names: its normal canonical name, and the same name preceded by a .. The
. name is special: it cant be rebound to a dierent widget. This makes the widget available
even when its usual name has been redened.
User-dened widgets are dened using zle -N, and implemented as shell functions. When the
widget is executed, the corresponding shell function is executed, and can perform editing (or
other) actions. It is recommended that user-dened widgets should not have names starting
with ..
18.5 User-Dened Widgets
User-dened widgets, being implemented as shell functions, can execute any normal shell com-
mand. They can also run other widgets (whether built-in or user-dened) using the zle builtin
command. The standard input of the function is closed to prevent external commands from
unintentionally blocking ZLE by reading from the terminal, but read -k or read -q can be
used to read characters. Finally, they can examine and edit the ZLE buer being edited by
reading and setting the special parameters described below.
These special parameters are always available in widget functions, but are not in any way special
outside ZLE. If they have some normal value outside ZLE, that value is temporarily inaccessible,
but will return when the widget function exits. These special parameters in fact have local scope,
like parameters created in a function using local.
Inside completion widgets and traps called while ZLE is active, these parameters are available
read-only.
BUFFER (scalar)
The entire contents of the edit buer. If it is written to, the cursor remains at the
same oset, unless that would put it outside the buer.
BUFFERLINES (integer)
The number of screen lines needed for the edit buer currently displayed on screen
(i.e. without any changes to the preceding parameters done after the last redisplay);
read-only.
CONTEXT (scalar)
The context in which zle was called to read a line; read-only. One of the values:
start The start of a command line (at prompt PS1).
cont A continuation to a command line (at prompt PS2).
select In a select loop.
Chapter 18: Zsh Line Editor 155
vared Editing a variable in vared.
CURSOR (integer)
The oset of the cursor, within the edit buer. This is in the range 0 to $#BUFFER,
and is by denition equal to $#LBUFFER. Attempts to move the cursor outside the
buer will result in the cursor being moved to the appropriate end of the buer.
CUTBUFFER (scalar)
The last item cut using one of the kill- commands; the string which the next yank
would insert in the line. Later entries in the kill ring are in the array killring.
Note that the command zle copy-region-as-kill string can be used to set the
text of the cut buer from a shell function and cycle the kill ring in the same way
as interactively killing text.
HISTNO (integer)
The current history number. Setting this has the same eect as moving up or down
in the history to the corresponding history line. An attempt to set it is ignored if
the line is not stored in the history. Note this is not the same as the parameter
HISTCMD, which always gives the number of the history line being added to the main
shells history. HISTNO refers to the line being retrieved within zle.
KEYMAP (scalar)
The name of the currently selected keymap; read-only.
KEYS (scalar)
The keys typed to invoke this widget, as a literal string; read-only.
killring (array)
The array of previously killed items, with the most recently killed rst. This gives
the items that would be retrieved by a yank-pop in the same order. Note, however,
that the most recently killed item is in $CUTBUFFER; $killring shows the array of
previous entries.
The default size for the kill ring is eight, however the length may be changed by
normal array operations. Any empty string in the kill ring is ignored by the yank-
pop command, hence the size of the array eectively sets the maximum length of
the kill ring, while the number of non-zero strings gives the current length, both as
seen by the user at the command line.
LASTABORTEDSEARCH (scalar)
The last search string used by an interactive search that was aborted by the user
(status 3 returned by the search widget).
LASTSEARCH (scalar)
The last search string used by an interactive search; read-only. This is set even if
the search failed (status 0, 1 or 2 returned by the search widget), but not if it was
aborted by the user.
LASTWIDGET (scalar)
The name of the last widget that was executed; read-only.
LBUFFER (scalar)
The part of the buer that lies to the left of the cursor position. If it is assigned
to, only that part of the buer is replaced, and the cursor remains between the new
$LBUFFER and the old $RBUFFER.
MARK (integer)
Like CURSOR, but for the mark.
Chapter 18: Zsh Line Editor 156
NUMERIC (integer)
The numeric argument. If no numeric argument was given, this parameter is unset.
When this is set inside a widget function, builtin widgets called with the zle builtin
command will use the value assigned. If it is unset inside a widget function, builtin
widgets called behave as if no numeric argument was given.
PENDING (integer)
The number of bytes pending for input, i.e. the number of bytes which have already
been typed and can immediately be read. On systems where the shell is not able to
get this information, this parameter will always have a value of zero. Read-only.
PREBUFFER (scalar)
In a multi-line input at the secondary prompt, this read-only parameter contains
the contents of the lines before the one the cursor is currently in.
PREDISPLAY (scalar)
Text to be displayed before the start of the editable text buer. This does not
have to be a complete line; to display a complete line, a newline must be appended
explicitly. The text is reset on each new invocation (but not recursive invocation)
of zle.
POSTDISPLAY (scalar)
Text to be displayed after the end of the editable text buer. This does not have
to be a complete line; to display a complete line, a newline must be prepended
explicitly. The text is reset on each new invocation (but not recursive invocation)
of zle.
RBUFFER (scalar)
The part of the buer that lies to the right of the cursor position. If it is assigned
to, only that part of the buer is replaced, and the cursor remains between the old
$LBUFFER and the new $RBUFFER.
REGION_ACTIVE (integer)
Indicates if the region is currently active. It can be assigned 0 or 1 to deactivate and
activate the region respectively; Section 18.7 [Character Highlighting], page 173.
region_highlight (array)
Each element of this array may be set to a string that describes highlighting for an
arbitrary region of the command line that will take eect the next time the command
line is redisplayed. Highlighting of the non-editable parts of the command line in
PREDISPLAY and POSTDISPLAY are possible, but note that the P ag is needed for
character indexing to include PREDISPLAY.
Each string consists of the following parts:
Optionally, a P to signify that the start and end oset that follow include any
string set by the PREDISPLAY special parameter; this is needed if the predisplay
string itself is to be highlighted. Whitespace may follow the P.
A start oset in the same units as CURSOR, terminated by whitespace.
An end oset in the same units as CURSOR, terminated by whitespace.
A highlight specication in the same format as used for contexts in the pa-
rameter zle_highlight, Section 18.7 [Character Highlighting], page 173; for
example, standout or fg=red,bold.
For example,
region_highlight=("P0 20 bold")
Chapter 18: Zsh Line Editor 157
species that the rst twenty characters of the text including any predisplay string
should be highlighted in bold.
Note that the eect of region_highlight is not saved and disappears as soon as
the line is accepted.
UNDO_CHANGE_NO (integer)
A number representing the state of the undo history. The only use of this is passing
as an argument to the undo widget in order to undo back to the recorded point.
Read-only.
WIDGET (scalar)
The name of the widget currently being executed; read-only.
WIDGETFUNC (scalar)
The name of the shell function that implements a widget dened with either zle -N
or zle -C. In the former case, this is the second argument to the zle -N command
that dened the widget, or the rst argument if there was no second argument. In
the latter case this is the third argument to the zle -C command that dened the
widget. Read-only.
WIDGETSTYLE (scalar)
Describes the implementation behind the completion widget currently being exe-
cuted; the second argument that followed zle -C when the widget was dened.
This is the name of a builtin completion widget. For widgets dened with zle -N
this is set to the empty string. Read-only.
ZLE_STATE (scalar)
Contains a set of space-separated words that describe the current zle state.
Currently, the states shown are the insert mode as set by the overwrite-mode or
vi-replace widgets and whether history commands will visit imported entries as
controlled by the set-local-history widget. The string contains insert if charac-
ters to be inserted on the command line move existing characters to the right or
overwrite if characters to be inserted overwrite existing characters. It contains
localhistory if only local history commands will be visited or globalhistory
if imported history commands will also be visited.
The substrings are sorted in alphabetical order so that if you want to test for two
specic substrings in a future-proof way, you can do match by doing:
if [[ $ZLE_STATE == *insert*globalhistory* ]]; then ...; fi
18.5.1 Special Widgets
There are a few user-dened widgets which are special to the shell. If they do not exist, no
special action is taken. The environment provided is identical to that for any other editing
widget.
zle-isearch-exit
Executed at the end of incremental search at the point where the isearch prompt is
removed from the display. See zle-isearch-update for an example.
zle-isearch-update
Executed within incremental search when the display is about to be redrawn. Addi-
tional output below the incremental search prompt can be generated by using zle
-M within the widget. For example,
zle-isearch-update() { zle -M "Line $HISTNO"; }
zle -N zle-isearch-update
Chapter 18: Zsh Line Editor 158
Note the line output by zle -M is not deleted on exit from incremental search.
This can be done from a zle-isearch-exit widget:
zle-isearch-exit() { zle -M ""; }
zle -N zle-isearch-exit
zle-line-init
Executed every time the line editor is started to read a new line of input. The
following example puts the line editor into vi command mode when it starts up.
zle-line-init() { zle -K vicmd; }
zle -N zle-line-init
(The command inside the function sets the keymap directly; it is equivalent to zle
vi-cmd-mode.)
zle-line-finish
This is similar to zle-line-init but is executed every time the line editor has
nished reading a line of input.
zle-history-line-set
Executed when the history line changes.
zle-keymap-select
Executed every time the keymap changes, i.e. the special parameter KEYMAP is set
to a dierent value, while the line editor is active. Initialising the keymap when the
line editor starts does not cause the widget to be called.
The value $KEYMAP within the function reects the new keymap. The old keymap
is passed as the sole argument.
This can be used for detecting switches between the vi command (vicmd) and insert
(usually main) keymaps.
18.6 Standard Widgets
The following is a list of all the standard widgets, and their default bindings in emacs mode, vi
command mode and vi insert mode (the emacs, vicmd and viins keymaps, respectively).
Note that cursor keys are bound to movement keys in all three keymaps; the shell assumes that
the cursor keys send the key sequences reported by the terminal-handling library (termcap or
terminfo). The key sequences shown in the list are those based on the VT100, common on many
modern terminals, but in fact these are not necessarily bound. In the case of the viins keymap,
the initial escape character of the sequences serves also to return to the vicmd keymap: whether
this happens is determined by the KEYTIMEOUT parameter, see Chapter 15 [Parameters], page 70.
18.6.1 Movement
vi-backward-blank-word (unbound) (B) (unbound)
Move backward one word, where a word is dened as a series of non-blank characters.
backward-char (^B ESC-[D) (unbound) (unbound)
Move backward one character.
vi-backward-char (unbound) (^H h ^?) (ESC-[D)
Move backward one character, without changing lines.
backward-word (ESC-B ESC-b) (unbound) (unbound)
Move to the beginning of the previous word.
emacs-backward-word
Move to the beginning of the previous word.
Chapter 18: Zsh Line Editor 159
vi-backward-word (unbound) (b) (unbound)
Move to the beginning of the previous word, vi-style.
beginning-of-line (^A) (unbound) (unbound)
Move to the beginning of the line. If already at the beginning of the line, move to
the beginning of the previous line, if any.
vi-beginning-of-line
Move to the beginning of the line, without changing lines.
end-of-line (^E) (unbound) (unbound)
Move to the end of the line. If already at the end of the line, move to the end of the
next line, if any.
vi-end-of-line (unbound) ($) (unbound)
Move to the end of the line. If an argument is given to this command, the cursor
will be moved to the end of the line (argument - 1) lines down.
vi-forward-blank-word (unbound) (W) (unbound)
Move forward one word, where a word is dened as a series of non-blank characters.
vi-forward-blank-word-end (unbound) (E) (unbound)
Move to the end of the current word, or, if at the end of the current word, to the
end of the next word, where a word is dened as a series of non-blank characters.
forward-char (^F ESC-[C) (unbound) (unbound)
Move forward one character.
vi-forward-char (unbound) (space l) (ESC-[C)
Move forward one character.
vi-find-next-char (^X^F) (f) (unbound)
Read a character from the keyboard, and move to the next occurrence of it in the
line.
vi-find-next-char-skip (unbound) (t) (unbound)
Read a character from the keyboard, and move to the position just before the next
occurrence of it in the line.
vi-find-prev-char (unbound) (F) (unbound)
Read a character from the keyboard, and move to the previous occurrence of it in
the line.
vi-find-prev-char-skip (unbound) (T) (unbound)
Read a character from the keyboard, and move to the position just after the previous
occurrence of it in the line.
vi-first-non-blank (unbound) (^) (unbound)
Move to the rst non-blank character in the line.
vi-forward-word (unbound) (w) (unbound)
Move forward one word, vi-style.
forward-word (ESC-F ESC-f) (unbound) (unbound)
Move to the beginning of the next word. The editors idea of a word is specied
with the WORDCHARS parameter.
emacs-forward-word
Move to the end of the next word.
vi-forward-word-end (unbound) (e) (unbound)
Move to the end of the next word.
Chapter 18: Zsh Line Editor 160
vi-goto-column (ESC-|) (|) (unbound)
Move to the column specied by the numeric argument.
vi-goto-mark (unbound) () (unbound)
Move to the specied mark.
vi-goto-mark-line (unbound) () (unbound)
Move to beginning of the line containing the specied mark.
vi-repeat-find (unbound) (;) (unbound)
Repeat the last vi-find command.
vi-rev-repeat-find (unbound) (,) (unbound)
Repeat the last vi-find command in the opposite direction.
18.6.2 History Control
beginning-of-buffer-or-history (ESC-<) (unbound) (unbound)
Move to the beginning of the buer, or if already there, move to the rst event in
the history list.
beginning-of-line-hist
Move to the beginning of the line. If already at the beginning of the buer, move
to the previous history line.
beginning-of-history
Move to the rst event in the history list.
down-line-or-history (^N ESC-[B) (j) (ESC-[B)
Move down a line in the buer, or if already at the bottom line, move to the next
event in the history list.
vi-down-line-or-history (unbound) (+) (unbound)
Move down a line in the buer, or if already at the bottom line, move to the next
event in the history list. Then move to the rst non-blank character on the line.
down-line-or-search
Move down a line in the buer, or if already at the bottom line, search forward in
the history for a line beginning with the rst word in the buer.
If called from a function by the zle command with arguments, the rst argument
is taken as the string for which to search, rather than the rst word in the buer.
down-history (unbound) (^N) (unbound)
Move to the next event in the history list.
history-beginning-search-backward
Search backward in the history for a line beginning with the current line up to the
cursor. This leaves the cursor in its original position.
end-of-buffer-or-history (ESC->) (unbound) (unbound)
Move to the end of the buer, or if already there, move to the last event in the
history list.
end-of-line-hist
Move to the end of the line. If already at the end of the buer, move to the next
history line.
end-of-history
Move to the last event in the history list.
Chapter 18: Zsh Line Editor 161
vi-fetch-history (unbound) (G) (unbound)
Fetch the history line specied by the numeric argument. This defaults to the
current history line (i.e. the one that isnt history yet).
history-incremental-search-backward (^R ^Xr) (unbound) (unbound)
Search backward incrementally for a specied string. The search is case-insensitive
if the search string does not have uppercase letters and no numeric argument was
given. The string may begin with ^ to anchor the search to the beginning of the
line. When called from a user-dened function returns the following statuses: 0, if
the search succeeded; 1, if the search failed; 2, if the search term was a bad pattern;
3, if the search was aborted by the send-break command.
A restricted set of editing functions is available in the mini-buer. Keys are looked
up in the special isearch keymap, and if not found there in the main keymap (note
that by default the isearch keymap is empty). An interrupt signal, as dened by
the stty setting, will stop the search and go back to the original line. An undened
key will have the same eect. Note that the following always perform the same task
within incremental searches and cannot be replaced by user dened widgets, nor
can the set of functions be extended. The supported functions are:
accept-and-hold
accept-and-infer-next-history
accept-line
accept-line-and-down-history
Perform the usual function after exiting incremental search. The com-
mand line displayed is executed.
backward-delete-char
vi-backward-delete-char
Back up one place in the search history. If the search has been repeated
this does not immediately erase a character in the minibuer.
accept-search
Exit incremental search, retaining the command line but performing no
further action. Note that this function is not bound by default and has
no eect outside incremental search.
backward-delete-word
backward-kill-word
vi-backward-kill-word
Back up one character in the minibuer; if multiple searches have been
performed since the character was inserted the search history is rewound
to the point just before the character was entered. Hence this has the
eect of repeating backward-delete-char.
clear-screen
Clear the screen, remaining in incremental search mode.
history-incremental-search-backward
Find the next occurrence of the contents of the mini-buer.
history-incremental-search-forward
Invert the sense of the search.
magic-space
Inserts a non-magical space.
Chapter 18: Zsh Line Editor 162
quoted-insert
vi-quoted-insert
Quote the character to insert into the minibuer.
redisplay
Redisplay the command line, remaining in incremental search mode.
vi-cmd-mode
Select the vicmd keymap; the main keymap (insert mode) will be
selected initially.
In addition, the modications that were made while in vi insert mode
are merged to form a single undo event.
vi-repeat-search
vi-rev-repeat-search
Repeat the search. The direction of the search is indicated in the mini-
buer.
Any character that is not bound to one of the above functions, or self-insert
or self-insert-unmeta, will cause the mode to be exited. The character is then
looked up and executed in the keymap in eect at that point.
When called from a widget function by the zle command, the incremental search
commands can take a string argument. This will be treated as a string of keys, as
for arguments to the bindkey command, and used as initial input for the command.
Any characters in the string which are unused by the incremental search will be
silently ignored. For example,
zle history-incremental-search-backward forceps
will search backwards for forceps, leaving the minibuer containing the string
forceps.
history-incremental-search-forward (^S ^Xs) (unbound) (unbound)
Search forward incrementally for a specied string. The search is case-insensitive
if the search string does not have uppercase letters and no numeric argument was
given. The string may begin with ^ to anchor the search to the beginning of
the line. The functions available in the mini-buer are the same as for history-
incremental-search-backward.
history-incremental-pattern-search-backward
history-incremental-pattern-search-forward
These widgets behave similarly to the corresponding widgets with no -pattern,
but the search string typed by the user is treated as a pattern, respecting the
current settings of the various options aecting pattern matching. See Section 14.8
[Filename Generation], page 59 for a description of patterns. If no numeric argument
was given lowercase letters in the search string may match uppercase letters in the
history. The string may begin with ^ to anchor the search to the beginning of the
line.
The prompt changes to indicate an invalid pattern; this may simply indicate the
pattern is not yet complete.
Note that only non-overlapping matches are reported, so an expression with wild-
cards may return fewer matches on a line than are visible by inspection.
history-search-backward (ESC-P ESC-p) (unbound) (unbound)
Search backward in the history for a line beginning with the rst word in the buer.
If called from a function by the zle command with arguments, the rst argument
is taken as the string for which to search, rather than the rst word in the buer.
Chapter 18: Zsh Line Editor 163
vi-history-search-backward (unbound) (/) (unbound)
Search backward in the history for a specied string. The string may begin with ^
to anchor the search to the beginning of the line.
A restricted set of editing functions is available in the mini-buer. An interrupt
signal, as dened by the stty setting, will stop the search. The functions available in
the mini-buer are: accept-line, backward-delete-char, vi-backward-delete-
char, backward-kill-word, vi-backward-kill-word, clear-screen, redisplay,
quoted-insert and vi-quoted-insert.
vi-cmd-mode is treated the same as accept-line, and magic-space is treated as a
space. Any other character that is not bound to self-insert or self-insert-unmeta will
beep and be ignored. If the function is called from vi command mode, the bindings
of the current insert mode will be used.
If called from a function by the zle command with arguments, the rst argument
is taken as the string for which to search, rather than the rst word in the buer.
history-search-forward (ESC-N ESC-n) (unbound) (unbound)
Search forward in the history for a line beginning with the rst word in the buer.
If called from a function by the zle command with arguments, the rst argument
is taken as the string for which to search, rather than the rst word in the buer.
vi-history-search-forward (unbound) (?) (unbound)
Search forward in the history for a specied string. The string may begin with ^
to anchor the search to the beginning of the line. The functions available in the
mini-buer are the same as for vi-history-search-backward. Argument handling
is also the same as for that command.
infer-next-history (^X^N) (unbound) (unbound)
Search in the history list for a line matching the current one and fetch the event
following it.
insert-last-word (ESC- ESC-.) (unbound) (unbound)
Insert the last word from the previous history event at the cursor position. If a
positive numeric argument is given, insert that word from the end of the previous
history event. If the argument is zero or negative insert that word from the left
(zero inserts the previous command word). Repeating this command replaces the
word just inserted with the last word from the history event prior to the one just
used; numeric arguments can be used in the same way to pick a word from that
event.
When called from a shell function invoked from a user-dened widget, the command
can take one to three arguments. The rst argument species a history oset which
applies to successive calls to this widget: if it is -1, the default behaviour is used,
while if it is 1, successive calls will move forwards through the history. The value 0
can be used to indicate that the history line examined by the previous execution of
the command will be reexamined. Note that negative numbers should be preceded
by a -- argument to avoid confusing them with options.
If two arguments are given, the second species the word on the command line in
normal array index notation (as a more natural alternative to the prex argument).
Hence 1 is the rst word, and -1 (the default) is the last word.
If a third argument is given, its value is ignored, but it is used to signify that the
history oset is relative to the current history line, rather than the one remembered
after the previous invocations of insert-last-word.
For example, the default behaviour of the command corresponds to
Chapter 18: Zsh Line Editor 164
zle insert-last-word -- -1 -1
while the command
zle insert-last-word -- -1 1 -
always copies the rst word of the line in the history immediately before the line
being edited. This has the side eect that later invocations of the widget will be
relative to that line.
vi-repeat-search (unbound) (n) (unbound)
Repeat the last vi history search.
vi-rev-repeat-search (unbound) (N) (unbound)
Repeat the last vi history search, but in reverse.
up-line-or-history (^P ESC-[A) (k) (ESC-[A)
Move up a line in the buer, or if already at the top line, move to the previous event
in the history list.
vi-up-line-or-history (unbound) (-) (unbound)
Move up a line in the buer, or if already at the top line, move to the previous event
in the history list. Then move to the rst non-blank character on the line.
up-line-or-search
Move up a line in the buer, or if already at the top line, search backward in the
history for a line beginning with the rst word in the buer.
If called from a function by the zle command with arguments, the rst argument
is taken as the string for which to search, rather than the rst word in the buer.
up-history (unbound) (^P) (unbound)
Move to the previous event in the history list.
history-beginning-search-forward
Search forward in the history for a line beginning with the current line up to the
cursor. This leaves the cursor in its original position.
set-local-history
By default, history movement commands visit the imported lines as well as the
local lines. This widget lets you toggle this on and o, or set it with the numeric
argument. Zero for both local and imported lines and nonzero for only local lines.
18.6.3 Modifying Text
vi-add-eol (unbound) (A) (unbound)
Move to the end of the line and enter insert mode.
vi-add-next (unbound) (a) (unbound)
Enter insert mode after the current cursor position, without changing lines.
backward-delete-char (^H ^?) (unbound) (unbound)
Delete the character behind the cursor.
vi-backward-delete-char (unbound) (X) (^H)
Delete the character behind the cursor, without changing lines. If in insert mode,
this wont delete past the point where insert mode was last entered.
backward-delete-word
Delete the word behind the cursor.
backward-kill-line
Kill from the beginning of the line to the cursor position.
Chapter 18: Zsh Line Editor 165
backward-kill-word (^W ESC-^H ESC-^?) (unbound) (unbound)
Kill the word behind the cursor.
vi-backward-kill-word (unbound) (unbound) (^W)
Kill the word behind the cursor, without going past the point where insert mode
was last entered.
capitalize-word (ESC-C ESC-c) (unbound) (unbound)
Capitalize the current word and move past it.
vi-change (unbound) (c) (unbound)
Read a movement command from the keyboard, and kill from the cursor position
to the endpoint of the movement. Then enter insert mode. If the command is
vi-change, change the current line.
vi-change-eol (unbound) (C) (unbound)
Kill to the end of the line and enter insert mode.
vi-change-whole-line (unbound) (S) (unbound)
Kill the current line and enter insert mode.
copy-region-as-kill (ESC-W ESC-w) (unbound) (unbound)
Copy the area from the cursor to the mark to the kill buer.
If called from a ZLE widget function in the form zle copy-region-as-kill string
then string will be taken as the text to copy to the kill buer. The cursor, the mark
and the text on the command line are not used in this case.
copy-prev-word (ESC-^ ) (unbound) (unbound)
Duplicate the word to the left of the cursor.
copy-prev-shell-word
Like copy-prev-word, but the word is found by using shell parsing, whereas copy-
prev-word looks for blanks. This makes a dierence when the word is quoted and
contains spaces.
vi-delete (unbound) (d) (unbound)
Read a movement command from the keyboard, and kill from the cursor position to
the endpoint of the movement. If the command is vi-delete, kill the current line.
delete-char
Delete the character under the cursor.
vi-delete-char (unbound) (x) (unbound)
Delete the character under the cursor, without going past the end of the line.
delete-word
Delete the current word.
down-case-word (ESC-L ESC-l) (unbound) (unbound)
Convert the current word to all lowercase and move past it.
kill-word (ESC-D ESC-d) (unbound) (unbound)
Kill the current word.
gosmacs-transpose-chars
Exchange the two characters behind the cursor.
vi-indent (unbound) (>) (unbound)
Indent a number of lines.
vi-insert (unbound) (i) (unbound)
Enter insert mode.
Chapter 18: Zsh Line Editor 166
vi-insert-bol (unbound) (I) (unbound)
Move to the rst non-blank character on the line and enter insert mode.
vi-join (^X^J) (J) (unbound)
Join the current line with the next one.
kill-line (^K) (unbound) (unbound)
Kill from the cursor to the end of the line. If already on the end of the line, kill the
newline character.
vi-kill-line (unbound) (unbound) (^U)
Kill from the cursor back to wherever insert mode was last entered.
vi-kill-eol (unbound) (D) (unbound)
Kill from the cursor to the end of the line.
kill-region
Kill from the cursor to the mark.
kill-buffer (^X^K) (unbound) (unbound)
Kill the entire buer.
kill-whole-line (^U) (unbound) (unbound)
Kill the current line.
vi-match-bracket (^X^B) (%) (unbound)
Move to the bracket character (one of {}, () or []) that matches the one under the
cursor. If the cursor is not on a bracket character, move forward without going past
the end of the line to nd one, and then go to the matching bracket.
vi-open-line-above (unbound) (O) (unbound)
Open a line above the cursor and enter insert mode.
vi-open-line-below (unbound) (o) (unbound)
Open a line below the cursor and enter insert mode.
vi-oper-swap-case
Read a movement command from the keyboard, and swap the case of all charac-
ters from the cursor position to the endpoint of the movement. If the movement
command is vi-oper-swap-case, swap the case of all characters on the current line.
overwrite-mode (^X^O) (unbound) (unbound)
Toggle between overwrite mode and insert mode.
vi-put-before (unbound) (P) (unbound)
Insert the contents of the kill buer before the cursor. If the kill buer contains a
sequence of lines (as opposed to characters), paste it above the current line.
vi-put-after (unbound) (p) (unbound)
Insert the contents of the kill buer after the cursor. If the kill buer contains a
sequence of lines (as opposed to characters), paste it below the current line.
quoted-insert (^V) (unbound) (unbound)
Insert the next character typed into the buer literally. An interrupt character will
not be inserted.
vi-quoted-insert (unbound) (unbound) (^Q ^V)
Display a ^ at the cursor position, and insert the next character typed into the
buer literally. An interrupt character will not be inserted.
quote-line (ESC-) (unbound) (unbound)
Quote the current line; that is, put a character at the beginning and the end,
and convert all characters to \.
Chapter 18: Zsh Line Editor 167
quote-region (ESC-") (unbound) (unbound)
Quote the region from the cursor to the mark.
vi-replace (unbound) (R) (unbound)
Enter overwrite mode.
vi-repeat-change (unbound) (.) (unbound)
Repeat the last vi mode text modication. If a count was used with the modi-
cation, it is remembered. If a count is given to this command, it overrides the
remembered count, and is remembered for future uses of this command. The cut
buer specication is similarly remembered.
vi-replace-chars (unbound) (r) (unbound)
Replace the character under the cursor with a character read from the keyboard.
self-insert (printable characters) (unbound) (printable characters and some control
characters)
Insert a character into the buer at the cursor position.
self-insert-unmeta (ESC-^I ESC-^J ESC-^M) (unbound) (unbound)
Insert a character into the buer after stripping the meta bit and converting ^M to
^J.
vi-substitute (unbound) (s) (unbound)
Substitute the next character(s).
vi-swap-case (unbound) (~) (unbound)
Swap the case of the character under the cursor and move past it.
transpose-chars (^T) (unbound) (unbound)
Exchange the two characters to the left of the cursor if at end of line, else exchange
the character under the cursor with the character to the left.
transpose-words (ESC-T ESC-t) (unbound) (unbound)
Exchange the current word with the one before it.
vi-unindent (unbound) (<) (unbound)
Unindent a number of lines.
up-case-word (ESC-U ESC-u) (unbound) (unbound)
Convert the current word to all caps and move past it.
yank (^Y) (unbound) (unbound)
Insert the contents of the kill buer at the cursor position.
yank-pop (ESC-y) (unbound) (unbound)
Remove the text just yanked, rotate the kill-ring (the history of previously killed
text) and yank the new top. Only works following yank or yank-pop.
vi-yank (unbound) (y) (unbound)
Read a movement command from the keyboard, and copy the region from the cursor
position to the endpoint of the movement into the kill buer. If the command is
vi-yank, copy the current line.
vi-yank-whole-line (unbound) (Y) (unbound)
Copy the current line into the kill buer.
vi-yank-eol
Copy the region from the cursor position to the end of the line into the kill buer.
Arguably, this is what Y should do in vi, but it isnt what it actually does.
Chapter 18: Zsh Line Editor 168
18.6.4 Arguments
digit-argument (ESC-0..ESC-9) (1-9) (unbound)
Start a new numeric argument, or add to the current one. See also vi-digit-
or-beginning-of-line. This only works if bound to a key sequence ending in a
decimal digit.
Inside a widget function, a call to this function treats the last key of the key sequence
which called the widget as the digit.
neg-argument (ESC) (unbound) (unbound)
Changes the sign of the following argument.
universal-argument
Multiply the argument of the next command by 4. Alternatively, if this command is
followed by an integer (positive or negative), use that as the argument for the next
command. Thus digits cannot be repeated using this command. For example, if
this command occurs twice, followed immediately by forward-char, move forward
sixteen spaces; if instead it is followed by -2, then forward-char, move backward
two spaces.
Inside a widget function, if passed an argument, i.e. zle universal-argument
num, the numerical argument will be set to num; this is equivalent to
NUMERIC=num.
argument-base
Use the existing numeric argument as a numeric base, which must be in the range 2
to 36 inclusive. Subsequent use of digit-argument and universal-argument will
input a new prex in the given base. The usual hexadecimal convention is used: the
letter a or A corresponds to 10, and so on. Arguments in bases requiring digits from
10 upwards are more conveniently input with universal-argument, since ESC-a
etc. are not usually bound to digit-argument.
The function can be used with a command argument inside a user-dened wid-
get. The following code sets the base to 16 and lets the user input a hexadecimal
argument until a key out of the digit range is typed:
zle argument-base 16
zle universal-argument
18.6.5 Completion
accept-and-menu-complete
In a menu completion, insert the current completion into the buer, and advance
to the next possible completion.
complete-word
Attempt completion on the current word.
delete-char-or-list (^D) (unbound) (unbound)
Delete the character under the cursor. If the cursor is at the end of the line, list
possible completions for the current word.
expand-cmd-path
Expand the current command to its full pathname.
expand-or-complete (TAB) (unbound) (TAB)
Attempt shell expansion on the current word. If that fails, attempt completion.
expand-or-complete-prefix
Attempt shell expansion on the current word up to cursor.
Chapter 18: Zsh Line Editor 169
expand-history (ESC-space ESC-!) (unbound) (unbound)
Perform history expansion on the edit buer.
expand-word (^X*) (unbound) (unbound)
Attempt shell expansion on the current word.
list-choices (ESC-^D) (^D =) (^D)
List possible completions for the current word.
list-expand (^Xg ^XG) (^G) (^G)
List the expansion of the current word.
magic-space
Perform history expansion and insert a space into the buer. This is intended to be
bound to space.
menu-complete
Like complete-word, except that menu completion is used. See the MENU_COMPLETE
option.
menu-expand-or-complete
Like expand-or-complete, except that menu completion is used.
reverse-menu-complete
Perform menu completion, like menu-complete, except that if a menu completion
is already in progress, move to the previous completion rather than the next.
end-of-list
When a previous completion displayed a list below the prompt, this widget can be
used to move the prompt below the list.
18.6.6 Miscellaneous
accept-and-hold (ESC-A ESC-a) (unbound) (unbound)
Push the contents of the buer on the buer stack and execute it.
accept-and-infer-next-history
Execute the contents of the buer. Then search the history list for a line matching
the current one and push the event following onto the buer stack.
accept-line (^J ^M) (^J ^M) (^J ^M)
Finish editing the buer. Normally this causes the buer to be executed as a shell
command.
accept-line-and-down-history (^O) (unbound) (unbound)
Execute the current line, and push the next history event on the buer stack.
auto-suffix-remove
If the previous action added a sux (space, slash, etc.) to the word on the command
line, remove it. Otherwise do nothing. Removing the sux ends any active menu
completion or menu selection.
This widget is intended to be called from user-dened widgets to enforce a desired
sux-removal behavior.
auto-suffix-retain
If the previous action added a sux (space, slash, etc.) to the word on the command
line, force it to be preserved. Otherwise do nothing. Retaining the sux ends any
active menu completion or menu selection.
This widget is intended to be called from user-dened widgets to enforce a desired
sux-preservation behavior.
Chapter 18: Zsh Line Editor 170
beep Beep, unless the BEEP option is unset.
vi-cmd-mode (^X^V) (unbound) (^[)
Enter command mode; that is, select the vicmd keymap. Yes, this is bound by
default in emacs mode.
vi-caps-lock-panic
Hang until any lowercase key is pressed. This is for vi users without the mental
capacity to keep track of their caps lock key (like the author).
clear-screen (^L ESC-^L) (^L) (^L)
Clear the screen and redraw the prompt.
describe-key-briefly
Reads a key sequence, then prints the function bound to that sequence.
exchange-point-and-mark (^X^X) (unbound) (unbound)
Exchange the cursor position (point) with the position of the mark. Unless a neg-
ative prex argument is given, the region between point and mark is activated so
that it can be highlighted. If a zero prex argument is given, the region is activated
but point and mark are not swapped.
execute-named-cmd (ESC-x) (:) (unbound)
Read the name of an editor command and execute it. A restricted set of editing
functions is available in the mini-buer. Keys are looked up in the special command
keymap, and if not found there in the main keymap. An interrupt signal, as
dened by the stty setting, will abort the function. Note that the following always
perform the same task within the executed-named-cmd environment and cannot
be replaced by user dened widgets, nor can the set of functions be extended.
The allowed functions are: backward-delete-char, vi-backward-delete-char,
clear-screen, redisplay, quoted-insert, vi-quoted-insert, backward-
kill-word, vi-backward-kill-word, kill-whole-line, vi-kill-line,
backward-kill-line, list-choices, delete-char-or-list, complete-word,
accept-line, expand-or-complete and expand-or-complete-prefix.
kill-region kills the last word, and vi-cmd-mode is treated the same as accept-line.
The space and tab characters, if not bound to one of these functions, will complete
the name and then list the possibilities if the AUTO_LIST option is set. Any other
character that is not bound to self-insert or self-insert-unmeta will beep and
be ignored. The bindings of the current insert mode will be used.
Currently this command may not be redened or called by name.
execute-last-named-cmd (ESC-z) (unbound) (unbound)
Redo the last function executed with execute-named-cmd.
Currently this command may not be redened or called by name.
get-line (ESC-G ESC-g) (unbound) (unbound)
Pop the top line o the buer stack and insert it at the cursor position.
pound-insert (unbound) (#) (unbound)
If there is no # character at the beginning of the buer, add one to the beginning
of each line. If there is one, remove a # from each line that has one. In either case,
accept the current line. The INTERACTIVE_COMMENTS option must be set for this to
have any usefulness.
vi-pound-insert
If there is no # character at the beginning of the current line, add one. If there is
one, remove it. The INTERACTIVE_COMMENTS option must be set for this to have any
usefulness.
Chapter 18: Zsh Line Editor 171
push-input
Push the entire current multiline construct onto the buer stack and return to the
top-level (PS1) prompt. If the current parser construct is only a single line, this is
exactly like push-line. Next time the editor starts up or is popped with get-line,
the construct will be popped o the top of the buer stack and loaded into the
editing buer.
push-line (^Q ESC-Q ESC-q) (unbound) (unbound)
Push the current buer onto the buer stack and clear the buer. Next time the
editor starts up, the buer will be popped o the top of the buer stack and loaded
into the editing buer.
push-line-or-edit
At the top-level (PS1) prompt, equivalent to push-line. At a secondary (PS2)
prompt, move the entire current multiline construct into the editor buer. The
latter is equivalent to push-input followed by get-line.
read-command
Only useful from a user-dened widget. A keystroke is read just as in normal
operation, but instead of the command being executed the name of the command
that would be executed is stored in the shell parameter REPLY. This can be used as
the argument of a future zle command. If the key sequence is not bound, status 1
is returned; typically, however, REPLY is set to undefined-key to indicate a useless
key sequence.
recursive-edit
Only useful from a user-dened widget. At this point in the function, the editor
regains control until one of the standard widgets which would normally cause zle
to exit (typically an accept-line caused by hitting the return key) is executed.
Instead, control returns to the user-dened widget. The status returned is non-zero
if the return was caused by an error, but the function still continues executing and
hence may tidy up. This makes it safe for the user-dened widget to alter the
command line or key bindings temporarily.
The following widget, caps-lock, serves as an example.
self-insert-ucase() {
LBUFFER+=${(U)KEYS[-1]}
}
integer stat
zle -N self-insert self-insert-ucase
zle -A caps-lock save-caps-lock
zle -A accept-line caps-lock
zle recursive-edit
stat=$?
zle -A .self-insert self-insert
zle -A save-caps-lock caps-lock
zle -D save-caps-lock
Chapter 18: Zsh Line Editor 172
(( stat )) && zle send-break
return $stat
This causes typed letters to be inserted capitalised until either accept-line (i.e.
typically the return key) is typed or the caps-lock widget is invoked again; the
later is handled by saving the old denition of caps-lock as save-caps-lock and
then rebinding it to invoke accept-line. Note that an error from the recursive edit
is detected as a non-zero return status and propagated by using the send-break
widget.
redisplay (unbound) (^R) (^R)
Redisplays the edit buer.
reset-prompt (unbound) (unbound) (unbound)
Force the prompts on both the left and right of the screen to be re-expanded,
then redisplay the edit buer. This reects changes both to the prompt variables
themselves and changes in the expansion of the values (for example, changes in time
or directory, or changes to the value of variables referred to by the prompt).
Otherwise, the prompt is only expanded each time zle starts, and when the display as
been interrupted by output from another part of the shell (such as a job notication)
which causes the command line to be reprinted.
send-break (^G ESC-^G) (unbound) (unbound)
Abort the current editor function, e.g. execute-named-command, or the editor itself,
e.g. if you are in vared. Otherwise abort the parsing of the current line; in this case
the aborted line is available in the shell variable ZLE_LINE_ABORTED.
run-help (ESC-H ESC-h) (unbound) (unbound)
Push the buer onto the buer stack, and execute the command run-help cmd,
where cmd is the current command. run-help is normally aliased to man.
vi-set-buffer (unbound) (") (unbound)
Specify a buer to be used in the following command. There are 35 buers that can
be specied: the 26 named buers "a to "z and the nine queued buers "1 to "9.
The named buers can also be specied as "A to "Z.
When a buer is specied for a cut command, the text being cut replaces the
previous contents of the specied buer. If a named buer is specied using a
capital, the newly cut text is appended to the buer instead of overwriting it.
If no buer is specied for a cut command, "1 is used, and the contents of "1 to "8
are each shifted along one buer; the contents of "9 is lost.
vi-set-mark (unbound) (m) (unbound)
Set the specied mark at the cursor position.
set-mark-command (^@) (unbound) (unbound)
Set the mark at the cursor position. If called with a negative prex argument, do
not set the mark but deactivate the region so that it is no longer highlighted (it is
still usable for other purposes). Otherwise the region is marked as active.
spell-word (ESC-$ ESC-S ESC-s) (unbound) (unbound)
Attempt spelling correction on the current word.
Chapter 18: Zsh Line Editor 173
split-undo
Breaks the undo sequence at the current change. This is useful in vi mode as changes
made in insert mode are coalesced on entering command mode. Similarly, undo will
normally revert as one all the changes made by a user-dened widget.
undefined-key
This command is executed when a key sequence that is not bound to any command
is typed. By default it beeps.
undo (^ ^Xu ^X^U) (unbound) (unbound)
Incrementally undo the last text modication. When called from a user-dened
widget, takes an optional argument indicating a previous state of the undo history
as returned by the UNDO_CHANGE_NO variable; modications are undone until that
state is reached.
Note that when invoked from vi command mode, the full prior change made in
insert mode is reverted, the changes having been merged when command mode was
selected.
redo Incrementally redo undone text modications.
vi-undo-change (unbound) (u) (unbound)
Undo the last text modication. If repeated, redo the modication.
what-cursor-position (^X=) (unbound) (unbound)
Print the character under the cursor, its code as an octal, decimal and hexadecimal
number, the current cursor position within the buer and the column of the cursor
in the current line.
where-is Read the name of an editor command and print the listing of key sequences that
invoke the specied command. A restricted set of editing functions is available in
the mini-buer. Keys are looked up in the special command keymap, and if not found
there in the main keymap.
which-command (ESC-?) (unbound) (unbound)
Push the buer onto the buer stack, and execute the command which-command
cmd. where cmd is the current command. which-command is normally aliased to
whence.
vi-digit-or-beginning-of-line (unbound) (0) (unbound)
If the last command executed was a digit as part of an argument, continue the
argument. Otherwise, execute vi-beginning-of-line.
18.7 Character Highlighting
The line editor has the ability to highlight characters or regions of the line that have a particular
signicance. This is controlled by the array parameter zle_highlight, if it has been set by the
user.
If the parameter contains the single entry none all highlighting is turned o. Note the parameter
is still expected to be an array.
Otherwise each entry of the array should consist of a word indicating a context for highlighting,
then a colon, then a comma-separated list of the types of highlighting to apply in that context.
The contexts available for highlighting are the following:
default Any text within the command line not aected by any other highlighting. Text
outside the editable area of the command line is not aected.
Chapter 18: Zsh Line Editor 174
isearch When one of the incremental history search widgets is active, the area of the com-
mand line matched by the search string or pattern.
region The region between the cursor (point) and the mark as set with set-mark-command.
The region is only highlighted if it is active, which is the case if set-mark-command or
exchange-point-and-mark has been called and the line has not been subsequently
modied. The region can be deactivated by calling set-mark-command with a neg-
ative prex argument, or reactivated by calling exchange-point-and-mark with a
zero prex argument. Note that whether or not the region is active has no eect on
its use within widgets, it simply determines whether it is highlighted.
special Individual characters that have no direct printable representation but are shown in
a special manner by the line editor. These characters are described below.
suffix This context is used in completion for characters that are marked as suxes that
will be removed if the completion ends at that point, the most obvious example
being a slash (/) after a directory name. Note that sux removal is congurable;
the circumstances under which the sux will be removed may dier for dierent
completions.
zle_highlight may contain additional elds for controlling how terminal sequences to change
colours are output. Each of the following is followed by a colon and a string in the same form
as for key bindings. This will not be necessary for the vast majority of terminals as the defaults
shown in parentheses are widely used.
fg_start_code (\e[3)
The start of the escape sequence for the foreground colour. This is followed by an
ASCII digit representing the colour.
fg_default_code (9)
The number to use instead of the colour to reset the default foreground colour.
fg_end_code (m)
The end of the escape sequence for the foreground colour.
bg_start_code (\e[4)
The start of the escape sequence for the background colour. This is followed by an
ASCII digit representing the colour.
bg_default_code (9)
The number to use instead of the colour to reset the default background colour.
bg_end_code (m)
The end of the escape sequence for the background colour.
The available types of highlighting are the following. Note that not all types of highlighting are
available on all terminals:
none No highlighting is applied to the given context. It is not useful for this to appear
with other types of highlighting; it is used to override a default.
fg=colour The foreground colour should be set to colour, a decimal integer or the name of one
of the eight most widely-supported colours.
Not all terminals support this and, of those that do, not all provide facilities to
test the support, hence the user should decide based on the terminal type. Most
terminals support the colours black, red, green, yellow, blue, magenta, cyan and
white, which can be set by name. In addition. default may be used to set the
terminals default foreground colour. Abbreviations are allowed; b or bl selects
Chapter 18: Zsh Line Editor 175
black. Some terminals may generate additional colours if the bold attribute is also
present.
On recent terminals and on systems with an up-to-date terminal database the num-
ber of colours supported may be tested by the command echotc Co; if this suc-
ceeds, it indicates a limit on the number of colours which will be enforced by the
line editor. The number of colours is in any case limited to 256 (i.e. the range 0 to
255).
Colour is also known as color.
bg=colour The background colour should be set to colour. This works similarly to the fore-
ground colour, except the background is not usually aected by the bold attribute.
bold The characters in the given context are shown in a bold font. Not all terminals
distinguish bold fonts.
standout The characters in the given context are shown in the terminals standout mode. The
actual eect is specic to the terminal; on many terminals it is inverse video. On
some such terminals, where the cursor does not blink it appears with standout mode
negated, making it less than clear where the cursor actually is. On such terminals
one of the other eects may be preferable for highlighting the region and matched
search string.
underline
The characters in the given context are shown underlined. Some terminals show
the foreground in a dierent colour instead; in this case whitespace will not be
highlighted.
The characters described above as special are as follows. The formatting described here is used
irrespective of whether the characters are highlighted:
ASCII control characters
Control characters in the ASCII range are shown as ^ followed by the base char-
acter.
Unprintable multibyte characters
This item applies to control characters not in the ASCII range, plus other characters
as follows. If the MULTIBYTE option is in eect, multibyte characters not in the
ASCII character set that are reported as having zero width are treated as combining
characters when the option COMBINING_CHARS is on. If the option is o, or if a
character appears where a combining character is not valid, the character is treated
as unprintable.
Unprintable multibyte characters are shown as a hexadecimal number between angle
brackets. The number is the code point of the character in the wide character set;
this may or may not be Unicode, depending on the operating system.
Invalid multibyte characters
If the MULTIBYTE option is in eect, any sequence of one or more bytes that does not
form a valid character in the current character set is treated as a series of bytes each
shown as a special character. This case can be distinguished from other unprintable
characters as the bytes are represented as two hexadecimal digits between angle
brackets, as distinct from the four or eight digits that are used for unprintable
characters that are nonetheless valid in the current character set.
Not all systems support this: for it to work, the systems representation of wide
characters must be code values from the Universal Character Set, as dened by IS0
10646 (also known as Unicode).
Chapter 19: Completion Widgets 176
Wrapped double-width characters
When a double-width character appears in the nal column of a line, it is instead
shown on the next line. The empty space left in the original position is highlighted
as a special character.
If zle_highlight is not set or no value applies to a particular context, the defaults applied are
equivalent to
zle_highlight=(region:standout special:standout
suffix:bold isearch:underline)
i.e. both the region and special characters are shown in standout mode.
Within widgets, arbitrary regions may be highlighted by setting the special array parameter
region_highlight; see Section 18.4 [Zle Widgets], page 154.
19 Completion Widgets
19.1 Description
The shells programmable completion mechanism can be manipulated in two ways; here the low-
level features supporting the newer, function-based mechanism are dened. A complete set of
shell functions based on these features is described in the next chapter, Chapter 20 [Completion
System], page 191, and users with no interest in adding to that system (or, potentially, writing
their own see dictionary entry for hubris) should skip the current section. The older system
based on the compctl builtin command is described in Chapter 21 [Completion Using compctl],
page 254.
Completion widgets are dened by the -C option to the zle builtin command provided by the
zsh/zle module (see Section 22.29 [The zsh/zle Module], page 301). For example,
zle -C complete expand-or-complete completer
denes a widget named complete. The second argument is the name of any of the
builtin widgets that handle completions: complete-word, expand-or-complete, expand-
or-complete-prefix, menu-complete, menu-expand-or-complete, reverse-menu-complete,
list-choices, or delete-char-or-list. Note that this will still work even if the widget in
question has been re-bound.
When this newly dened widget is bound to a key using the bindkey builtin command dened in
the zsh/zle module (Chapter 18 [Zsh Line Editor], page 144), typing that key will call the shell
function completer. This function is responsible for generating the possible matches using the
builtins described below. As with other ZLE widgets, the function is called with its standard
input closed.
Once the function returns, the completion code takes over control again and treats the matches
in the same manner as the specied builtin widget, in this case expand-or-complete.
19.2 Completion Special Parameters
The parameters ZLE_REMOVE_SUFFIX_CHARS and ZLE_SPACE_SUFFIX_CHARS are used by the
completion mechanism, but are not special. Section 15.6 [Parameters Used By The Shell],
page 80.
Inside completion widgets, and any functions called from them, some parameters have special
meaning; outside these functions they are not special to the shell in any way. These parameters
are used to pass information between the completion code and the completion widget. Some
Chapter 19: Completion Widgets 177
of the builtin commands and the condition codes use or change the current values of these
parameters. Any existing values will be hidden during execution of completion widgets; except
for compstate, the parameters are reset on each function exit (including nested function calls
from within the completion widget) to the values they had when the function was entered.
CURRENT This is the number of the current word, i.e. the word the cursor is currently on in
the words array. Note that this value is only correct if the ksharrays option is not
set.
IPREFIX Initially this will be set to the empty string. This parameter functions like PREFIX;
it contains a string which precedes the one in PREFIX and is not considered part of
the list of matches. Typically, a string is transferred from the beginning of PREFIX
to the end of IPREFIX, for example:
IPREFIX=${PREFIX%%\=*}=
PREFIX=${PREFIX#*=}
causes the part of the prex up to and including the rst equal sign not to be treated
as part of a matched string. This can be done automatically by the compset builtin,
see below.
ISUFFIX As IPREFIX, but for a sux that should not be considered part of the matches; note
that the ISUFFIX string follows the SUFFIX string.
PREFIX Initially this will be set to the part of the current word from the beginning of the
word up to the position of the cursor; it may be altered to give a common prex for
all matches.
QIPREFIX This parameter is read-only and contains the quoted string up to the word being
completed. E.g. when completing "foo, this parameter contains the double quote.
If the -q option of compset is used (see below), and the original string was "foo
bar with the cursor on the bar, this parameter contains "foo .
QISUFFIX Like QIPREFIX, but containing the sux.
SUFFIX Initially this will be set to the part of the current word from the cursor position
to the end; it may be altered to give a common sux for all matches. It is most
useful when the option COMPLETE_IN_WORD is set, as otherwise the whole word on
the command line is treated as a prex.
compstate
This is an associative array with various keys and values that the completion code
uses to exchange information with the completion widget. The keys are:
all_quotes
The -q option of the compset builtin command (see below) allows a
quoted string to be broken into separate words; if the cursor is on one
of those words, that word will be completed, possibly invoking compset
-q recursively. With this key it is possible to test the types of quoted
strings which are currently broken into parts in this fashion. Its value
contains one character for each quoting level. The characters are a
single quote or a double quote for strings quoted with these characters,
a dollars sign for strings quoted with $... and a backslash for strings
not starting with a quote character. The rst character in the value
always corresponds to the innermost quoting level.
context This will be set by the completion code to the overall context in which
completion is attempted. Possible values are:
Chapter 19: Completion Widgets 178
array_value
when completing inside the value of an array parameter
assignment; in this case the words array contains the words
inside the parentheses.
brace_parameter
when completing the name of a parameter in a parame-
ter expansion beginning with ${. This context will also be
set when completing parameter ags following ${(; the full
command line argument is presented and the handler must
test the value to be completed to ascertain that this is the
case.
assign_parameter
when completing the name of a parameter in a parameter
assignment.
command when completing for a normal command (either in com-
mand position or for an argument of the command).
condition
when completing inside a [[...]] conditional expression;
in this case the words array contains only the words inside
the conditional expression.
math when completing in a mathematical environment such as a
((...)) construct.
parameter
when completing the name of a parameter in a parameter
expansion beginning with $ but not ${.
redirect when completing after a redirection operator.
subscript
when completing inside a parameter subscript.
value when completing the value of a parameter assignment.
exact Controls the behaviour when the REC_EXACT option is set. It will be
set to accept if an exact match would be accepted, and will be unset
otherwise.
If it was set when at least one match equal to the string on the line was
generated, the match is accepted.
exact_string
The string of an exact match if one was found, otherwise unset.
ignored The number of words that were ignored because they matched one of
the patterns given with the -F option to the compadd builtin command.
insert This controls the manner in which a match is inserted into the command
line. On entry to the widget function, if it is unset the command line
is not to be changed; if set to unambiguous, any prex common to all
matches is to be inserted; if set to automenu-unambiguous, the common
prex is to be inserted and the next invocation of the completion code
may start menu completion (due to the AUTO_MENU option being set);
if set to menu or automenu menu completion will be started for the
matches currently generated (in the latter case this will happen because
Chapter 19: Completion Widgets 179
the AUTO_MENU is set). The value may also contain the string tab when
the completion code would normally not really do completion, but only
insert the TAB character.
On exit it may be set to any of the values above (where setting it to the
empty string is the same as unsetting it), or to a number, in which case
the match whose number is given will be inserted into the command
line. Negative numbers count backward from the last match (with -1
selecting the last match) and out-of-range values are wrapped around,
so that a value of zero selects the last match and a value one more
than the maximum selects the rst. Unless the value of this key ends
in a space, the match is inserted as in a menu completion, i.e. without
automatically appending a space.
Both menu and automenu may also specify the number of the match to
insert, given after a colon. For example, menu:2 says to start menu
completion, beginning with the second match.
Note that a value containing the substring tab makes the matches
generated be ignored and only the TAB be inserted.
Finally, it may also be set to all, which makes all matches generated
be inserted into the line.
insert_positions
When the completion system inserts an unambiguous string into the
line, there may be multiple places where characters are missing or where
the character inserted diers from at least one match. The value of this
key contains a colon separated list of all these positions, as indexes into
the command line.
last_prompt
If this is set to a non-empty string for every match added, the completion
code will move the cursor back to the previous prompt after the list of
completions has been displayed. Initially this is set or unset according
to the ALWAYS_LAST_PROMPT option.
list This controls whether or how the list of matches will be displayed. If it
is unset or empty they will never be listed; if its value begins with list,
they will always be listed; if it begins with autolist or ambiguous,
they will be listed when the AUTO_LIST or LIST_AMBIGUOUS options
respectively would normally cause them to be.
If the substring force appears in the value, this makes the list be shown
even if there is only one match. Normally, the list would be shown only
if there are at least two matches.
The value contains the substring packed if the LIST_PACKED option is
set. If this substring is given for all matches added to a group, this
group will show the LIST_PACKED behavior. The same is done for the
LIST_ROWS_FIRST option with the substring rows.
Finally, if the value contains the string explanations, only the expla-
nation strings, if any, will be listed and if it contains messages, only
the messages (added with the -x option of compadd) will be listed. If
it contains both explanations and messages both kinds of explana-
tion strings will be listed. It will be set appropriately on entry to a
completion widget and may be changed there.
Chapter 19: Completion Widgets 180
list_lines
This gives the number of lines that are needed to display the full list of
completions. Note that to calculate the total number of lines to display
you need to add the number of lines needed for the command line to
this value, this is available as the value of the BUFFERLINES special
parameter.
list_max Initially this is set to the value of the LISTMAX parameter. It may be
set to any other value; when the widget exits this value will be used in
the same way as the value of LISTMAX.
nmatches The number of matches generated and accepted by the completion code
so far.
old_insert
On entry to the widget this will be set to the number of the match of
an old list of completions that is currently inserted into the command
line. If no match has been inserted, this is unset.
As with old_list, the value of this key will only be used if it is the
string keep. If it was set to this value by the widget and there was an
old match inserted into the command line, this match will be kept and
if the value of the insert key species that another match should be
inserted, this will be inserted after the old one.
old_list This is set to yes if there is still a valid list of completions from a
previous completion at the time the widget is invoked. This will usually
be the case if and only if the previous editing operation was a completion
widget or one of the builtin completion functions. If there is a valid list
and it is also currently shown on the screen, the value of this key is
shown.
After the widget has exited the value of this key is only used if it was
set to keep. In this case the completion code will continue to use this
old list. If the widget generated new matches, they will not be used.
parameter
The name of the parameter when completing in a subscript or in the
value of a parameter assignment.
pattern_insert
Normally this is set to menu, which species that menu completion will
be used whenever a set of matches was generated using pattern match-
ing. If it is set to any other non-empty string by the user and menu
completion is not selected by other option settings, the code will instead
insert any common prex for the generated matches as with normal
completion.
pattern_match
Locally controls the behaviour given by the GLOB_COMPLETE option. Ini-
tially it is set to * if and only if the option is set. The completion widget
may set it to this value, to an empty string (which has the same eect
as unsetting it), or to any other non-empty string. If it is non-empty,
unquoted metacharacters on the command line will be treated as pat-
terns; if it is *, then additionally a wildcard * is assumed at the cursor
position; if it is empty or unset, metacharacters will be treated literally.
Note that the matcher specications given to the compadd builtin com-
mand are not used if this is set to a non-empty string.
Chapter 19: Completion Widgets 181
quote When completing inside quotes, this contains the quotation character
(i.e. either a single quote, a double quote, or a backtick). Otherwise it
is unset.
quoting When completing inside single quotes, this is set to the string single;
inside double quotes, the string double; inside backticks, the string
backtick. Otherwise it is unset.
redirect The redirection operator when completing in a redirection position, i.e.
one of <, >, etc.
restore This is set to auto before a function is entered, which forces the spe-
cial parameters mentioned above (words, CURRENT, PREFIX, IPREFIX,
SUFFIX, and ISUFFIX) to be restored to their previous values when the
function exits. If a function unsets it or sets it to any other string, they
will not be restored.
to_end Species the occasions on which the cursor is moved to the end of a
string when a match is inserted. On entry to a widget function, it
may be single if this will happen when a single unambiguous match
was inserted or match if it will happen any time a match is inserted
(for example, by menu completion; this is likely to be the eect of the
ALWAYS_TO_END option).
On exit, it may be set to single as above. It may also be set to always,
or to the empty string or unset; in those cases the cursor will be moved
to the end of the string always or never respectively. Any other string
is treated as match.
unambiguous
This key is read-only and will always be set to the common (unambigu-
ous) prex the completion code has generated for all matches added so
far.
unambiguous_cursor
This gives the position the cursor would be placed at if the common
prex in the unambiguous key were inserted, relative to the value of
that key. The cursor would be placed before the character whose index
is given by this key.
unambiguous_positions
This contains all positions where characters in the unambiguous string
are missing or where the character inserted diers from at least one of
the matches. The positions are given as indexes into the string given
by the value of the unambiguous key.
vared If completion is called while editing a line using the vared builtin, the
value of this key is set to the name of the parameter given as an argument
to vared. This key is only set while a vared command is active.
words This array contains the words present on the command line currently being edited.
Chapter 19: Completion Widgets 182
19.3 Completion Builtin Commands
compadd [ -akqQfenUld12C ] [ -F array ]
[ -P prex ] [ -S sux ]
[ -p hidden-prex ] [ -s hidden-sux ]
[ -i ignored-prex ] [ -I ignored-sux ]
[ -W le-prex ] [ -d array ]
[ -J name ] [ -V name ] [ -X explanation ] [ -x message ]
[ -r remove-chars ] [ -R remove-func ]
[ -D array ] [ -O array ] [ -A array ]
[ -E number ]
[ -M match-spec ] [ -- ] [ words ... ]
This builtin command can be used to add matches directly and control all the
information the completion code stores with each possible match. The return status
is zero if at least one match was added and non-zero if no matches were added.
The completion code breaks the string to complete into seven elds in the order:
<ipre><apre><hpre><word><hsuf><asuf><isuf>
The rst eld is an ignored prex taken from the command line, the contents of the
IPREFIX parameter plus the string given with the -i option. With the -U option,
only the string from the -i option is used. The eld <apre> is an optional prex
string given with the -P option. The <hpre> eld is a string that is considered part
of the match but that should not be shown when listing completions, given with
the -p option; for example, functions that do lename generation might specify a
common path prex this way. <word> is the part of the match that should appear
in the list of completions, i.e. one of the words given at the end of the compadd
command line. The suxes <hsuf>, <asuf> and <isuf> correspond to the prexes
<hpre>, <apre> and <ipre> and are given by the options -s, -S and -I, respectively.
The supported ags are:
-P prex This gives a string to be inserted before the given words. The string
given is not considered as part of the match and any shell metacharacters
in it will not be quoted when the string is inserted.
-S sux Like -P, but gives a string to be inserted after the match.
-p hidden-prex
This gives a string that should be inserted into the command line before
the match but that should not appear in the list of matches. Unless the
-U option is given, this string must be matched as part of the string on
the command line.
-s hidden-sux
Like -p, but gives a string to insert after the match.
-i ignored-prex
This gives a string to insert into the command line just before any string
given with the -P option. Without -P the string is inserted before
the string given with -p or directly before the match.
-I ignored-sux
Like -i, but gives an ignored sux.
-a With this ag the words are taken as names of arrays and the possible
matches are their values. If only some elements of the arrays are needed,
the words may also contain subscripts, as in foo[2,-1].
Chapter 19: Completion Widgets 183
-k With this ag the words are taken as names of associative arrays and
the possible matches are their keys. As for -a, the words may also
contain subscripts, as in foo[(R)*bar*].
-d array This adds per-match display strings. The array should contain one
element per word given. The completion code will then display the rst
element instead of the rst word, and so on. The array may be given
as the name of an array parameter or directly as a space-separated list
of words in parentheses.
If there are fewer display strings than words, the leftover words will be
displayed unchanged and if there are more display strings than words,
the leftover display strings will be silently ignored.
-l This option only has an eect if used together with the -d option. If
it is given, the display strings are listed one per line, not arrayed in
columns.
-o This option only has an eect if used together with the -d option. If
it is given, the order of the output is determined by the match strings;
otherwise it is determined by the display strings (i.e. the strings given
by the -d option).
-J name Gives the name of the group of matches the words should be stored in.
-V name Like -J but naming an unsorted group. These are in a dierent name
space than groups created with the -J ag.
-1 If given together with the -V option, makes only consecutive duplicates
in the group be removed. If combined with the -J option, this has
no visible eect. Note that groups with and without this ag are in
dierent name spaces.
-2 If given together with the -J or -V option, makes all duplicates be kept.
Again, groups with and without this ag are in dierent name spaces.
-X explanation
The explanation string will be printed with the list of matches, above
the group currently selected.
-x message
Like -X, but the message will be printed even if there are no matches
in the group.
-q The sux given with -S will be automatically removed if the next char-
acter typed is a blank or does not insert anything, or if the sux consists
of only one character and the next character typed is the same character.
-r remove-chars
This is a more versatile form of the -q option. The sux given with
-S or the slash automatically added after completing directories will
be automatically removed if the next character typed inserts one of
the characters given in the remove-chars. This string is parsed as a
characters class and understands the backslash sequences used by the
print command. For example, -r "a-z\t" removes the sux if the
next character typed inserts a lower case character or a TAB, and -r
"^0-9" removes the sux if the next character typed inserts anything
but a digit. One extra backslash sequence is understood in this string:
Chapter 19: Completion Widgets 184
\- stands for all characters that insert nothing. Thus -S "=" -q is
the same as -S "=" -r "= \t\n\-".
This option may also be used without the -S option; then any automat-
ically added space will be removed when one of the characters in the
list is typed.
-R remove-func
This is another form of the -r option. When a sux has been inserted
and the completion accepted, the function remove-func will be called
after the next character typed. It is passed the length of the sux as an
argument and can use the special parameters available in ordinary (non-
completion) zle widgets (see Chapter 18 [Zsh Line Editor], page 144) to
analyse and modify the command line.
-f If this ag is given, all of the matches built from words are marked as
being the names of les. They are not required to be actual lenames,
but if they are, and the option LIST_TYPES is set, the characters describ-
ing the types of the les in the completion lists will be shown. This also
forces a slash to be added when the name of a directory is completed.
-e This ag can be used to tell the completion code that the matches
added are parameter names for a parameter expansion. This will make
the AUTO_PARAM_SLASH and AUTO_PARAM_KEYS options be used for the
matches.
-W le-prex
This string is a pathname that will be prepended to each of the matches
formed by the given words together with any prex specied by the -p
option to form a complete lename for testing. Hence it is only useful if
combined with the -f ag, as the tests will not otherwise be performed.
-F array Species an array containing patterns. Words matching one of these
patterns are ignored, i.e. not considered to be possible matches.
The array may be the name of an array parameter or a list of literal
patterns enclosed in parentheses and quoted, as in -F "(*?.o *?.h)".
If the name of an array is given, the elements of the array are taken as
the patterns.
-Q This ag instructs the completion code not to quote any metacharacters
in the words when inserting them into the command line.
-M match-spec
This gives local match specications as described below in Section 19.5
[Completion Matching Control], page 187. This option may be given
more than once. In this case all match-specs given are concatenated
with spaces between them to form the specication string to use. Note
that they will only be used if the -U option is not given.
-n Species that the words added are to be used as possible matches, but
are not to appear in the completion listing.
-U If this ag is given, all words given will be accepted and no matching
will be done by the completion code. Normally this is used in functions
that do the matching themselves.
-O array If this option is given, the words are not added to the set of possible
completions. Instead, matching is done as usual and all of the words
Chapter 19: Completion Widgets 185
given as arguments that match the string on the command line will be
stored in the array parameter whose name is given as array.
-A array As the -O option, except that instead of those of the words which match
being stored in array, the strings generated internally by the completion
code are stored. For example, with a matching specication of -M
"L:|no=", the string nof on the command line and the string foo
as one of the words, this option stores the string nofoo in the array,
whereas the -O option stores the foo originally given.
-D array As with -O, the words are not added to the set of possible completions.
Instead, the completion code tests whether each word in turn matches
what is on the line. If the nth word does not match, the nth element
of the array is removed. Elements for which the corresponding word is
matched are retained.
-C This option adds a special match which expands to all other matches
when inserted into the line, even those that are added after this option
is used. Together with the -d option it is possible to specify a string
that should be displayed in the list for this special match. If no string
is given, it will be shown as a string containing the strings that would
be inserted for the other matches, truncated to the width of the screen.
-E This option adds number empty matches after the words have been
added. An empty match takes up space in completion listings but will
never be inserted in the line and cant be selected with menu completion
or menu selection. This makes empty matches only useful to format
completion lists and to make explanatory string be shown in completion
lists (since empty matches can be given display strings with the -d
option). And because all but one empty string would otherwise be
removed, this option implies the -V and -2 options (even if an explicit
-J option is given).
-
-- This ag ends the list of ags and options. All arguments after it will be
taken as the words to use as matches even if they begin with hyphens.
Except for the -M ag, if any of these ags is given more than once, the rst one
(and its argument) will be used.
compset -p number
compset -P [ number ] pattern
compset -s number
compset -S [ number ] pattern
compset -n begin [ end ]
compset -N beg-pat [ end-pat ]
compset -q
This command simplies modication of the special parameters, while its return
status allows tests on them to be carried out.
The options are:
-p number
If the contents of the PREFIX parameter is longer than number charac-
ters, the rst number characters are removed from it and appended to
the contents of the IPREFIX parameter.
Chapter 19: Completion Widgets 186
-P [ number ] pattern
If the value of the PREFIX parameter begins with anything that matches
the pattern, the matched portion is removed from PREFIX and appended
to IPREFIX.
Without the optional number, the longest match is taken, but if number
is given, anything up to the numberth match is moved. If the number
is negative, the numberth longest match is moved. For example, if
PREFIX contains the string a=b=c, then compset -P *\= will move
the string a=b= into the IPREFIX parameter, but compset -P 1 *\=
will move only the string a=.
-s number
As -p, but transfer the last number characters from the value of SUFFIX
to the front of the value of ISUFFIX.
-S [ number ] pattern
As -P, but match the last portion of SUFFIX and transfer the matched
portion to the front of the value of ISUFFIX.
-n begin [ end ]
If the current word position as specied by the parameter CURRENT is
greater than or equal to begin, anything up to the beginth word is
removed from the words array and the value of the parameter CURRENT
is decremented by begin.
If the optional end is given, the modication is done only if the current
word position is also less than or equal to end. In this case, the words
from position end onwards are also removed from the words array.
Both begin and end may be negative to count backwards from the last
element of the words array.
-N beg-pat [ end-pat ]
If one of the elements of the words array before the one at the index
given by the value of the parameter CURRENT matches the pattern beg-
pat, all elements up to and including the matching one are removed
from the words array and the value of CURRENT is changed to point to
the same word in the changed array.
If the optional pattern end-pat is also given, and there is an element in
the words array matching this pattern, the parameters are modied only
if the index of this word is higher than the one given by the CURRENT
parameter (so that the matching word has to be after the cursor). In
this case, the words starting with the one matching end-pat are also
removed from the words array. If words contains no word matching
end-pat, the testing and modication is performed as if it were not
given.
-q The word currently being completed is split on spaces into separate
words, respecting the usual shell quoting conventions. The resulting
words are stored in the words array, and CURRENT, PREFIX, SUFFIX,
QIPREFIX, and QISUFFIX are modied to reect the word part that is
completed.
In all the above cases the return status is zero if the test succeeded and the param-
eters were modied and non-zero otherwise. This allows one to use this builtin in
tests such as:
Chapter 19: Completion Widgets 187
if compset -P *\=; then ...
This forces anything up to and including the last equal sign to be ignored by the
completion code.
compcall [ -TD ]
This allows the use of completions dened with the compctl builtin from within
completion widgets. The list of matches will be generated as if one of the non-
widget completion functions (complete-word, etc.) had been called, except that
only compctls given for specic commands are used. To force the code to try
completions dened with the -T option of compctl and/or the default completion
(whether dened by compctl -D or the builtin default) in the appropriate places,
the -T and/or -D ags can be passed to compcall.
The return status can be used to test if a matching compctl denition was found.
It is non-zero if a compctl was found and zero otherwise.
Note that this builtin is dened by the zsh/compctl module.
19.4 Completion Condition Codes
The following additional condition codes for use within the [[ ... ]] construct are available
in completion widgets. These work on the special parameters. All of these tests can also be
performed by the compset builtin, but in the case of the condition codes the contents of the
special parameters are not modied.
-prefix [ number ] pattern
true if the test for the -P option of compset would succeed.
-suffix [ number ] pattern
true if the test for the -S option of compset would succeed.
-after beg-pat
true if the test of the -N option with only the beg-pat given would succeed.
-between beg-pat end-pat
true if the test for the -N option with both patterns would succeed.
19.5 Completion Matching Control
It is possible by use of the -M option of the compadd builtin command to specify how the
characters in the string to be completed (referred to here as the command line) map onto the
characters in the list of matches produced by the completion code (referred to here as the trial
completions). Note that this is not used if the command line contains a glob pattern and the
GLOB_COMPLETE option is set or the pattern_match of the compstate special association is set
to a non-empty string.
The match-spec given as the argument to the -M option (see Section 19.3 [Completion Builtin
Commands], page 182) consists of one or more matching descriptions separated by whitespace.
Each description consists of a letter followed by a colon and then the patterns describing which
character sequences on the line match which character sequences in the trial completion. Any
sequence of characters not handled in this fashion must match exactly, as usual.
The forms of match-spec understood are as follows. In each case, the form with an upper case
initial character retains the string already typed on the command line as the nal result of
completion, while with a lower case initial character the string on the command line is changed
into the corresponding part of the trial completion.
Chapter 19: Completion Widgets 188
m:lpat=tpat
M:lpat=tpat
Here, lpat is a pattern that matches on the command line, corresponding to tpat
which matches in the trial completion.
l:lanchor|lpat=tpat
L:lanchor|lpat=tpat
l:lanchor||ranchor=tpat
L:lanchor||ranchor=tpat
b:lpat=tpat
B:lpat=tpat
These letters are for patterns that are anchored by another pattern on the left side.
Matching for lpat and tpat is as for m and M, but the pattern lpat matched on the
command line must be preceded by the pattern lanchor. The lanchor can be blank
to anchor the match to the start of the command line string; otherwise the anchor
can occur anywhere, but must match in both the command line and trial completion
strings.
If no lpat is given but a ranchor is, this matches the gap between substrings matched
by lanchor and ranchor. Unlike lanchor, the ranchor only needs to match the trial
completion string.
The b and B forms are similar to l and L with an empty anchor, but need to
match only the beginning of the trial completion or the word on the command line,
respectively.
r:lpat|ranchor=tpat
R:lpat|ranchor=tpat
r:lanchor||ranchor=tpat
R:lanchor||ranchor=tpat
e:lpat=tpat
E:lpat=tpat
As l, L, b and B, with the dierence that the command line and trial completion
patterns are anchored on the right side. Here an empty ranchor and the e and E
forms force the match to the end of the trial completion or command line string.
Each lpat, tpat or anchor is either an empty string or consists of a sequence of literal characters
(which may be quoted with a backslash), question marks, character classes, and correspondence
classes; ordinary shell patterns are not used. Literal characters match only themselves, question
marks match any character, and character classes are formed as for globbing and match any
character in the given set.
Correspondence classes are dened like character classes, but with two dierences: they are
delimited by a pair of braces, and negated classes are not allowed, so the characters ! and
^ have no special meaning directly after the opening brace. They indicate that a range of
characters on the line match a range of characters in the trial completion, but (unlike ordinary
character classes) paired according to the corresponding position in the sequence. For example,
to make any ASCII lower case letter on the line match the corresponding upper case letter in
the trial completion, you can use m:{a-z}={A-Z} (however, see below for the recommended
form for this). More than one pair of classes can occur, in which case the rst class before the =
corresponds to the rst after it, and so on. If one side has more such classes than the other side,
the superuous classes behave like normal character classes. In anchor patterns correspondence
classes also behave like normal character classes.
The standard [:name:] forms described for standard shell patterns, Section 14.8 [Filename
Generation], page 59, may appear in correspondence classes as well as normal character classes.
The only special behaviour in correspondence classes is if the form on the left and the form on
Chapter 19: Completion Widgets 189
the right are each one of [:upper:], [:lower:]. In these cases the character in the word and
the character on the line must be the same up to a dierence in case. Hence to make any lower
case character on the line match the corresponding upper case character in the trial completion
you can use m:{[:lower:]}={[:upper:]}. Although the matching system does not yet handle
multibyte characters, this is likely to be a future extension, at which point this syntax will handle
arbitrary alphabets; hence this form, rather than the use of explicit ranges, is the recommended
form. In other cases [:name:] forms are allowed. If the two forms on the left and right are
the same, the characters must match exactly. In remaining cases, the corresponding tests are
applied to both characters, but they are not otherwise constrained; any matching character in
one set goes with any matching character in the other set: this is equivalent to the behaviour
of ordinary character classes.
The pattern tpat may also be one or two stars, * or **. This means that the pattern on
the command line can match any number of characters in the trial completion. In this case
the pattern must be anchored (on either side); in the case of a single star, the anchor then
determines how much of the trial completion is to be included only the characters up to the
next appearance of the anchor will be matched. With two stars, substrings matched by the
anchor can be matched, too.
Examples:
The keys of the options association dened by the parameter module are the option names
in all-lower-case form, without underscores, and without the optional no at the beginning even
though the builtins setopt and unsetopt understand option names with upper case letters,
underscores, and the optional no. The following alters the matching rules so that the prex no
and any underscore are ignored when trying to match the trial completions generated and upper
case letters on the line match the corresponding lower case letters in the words:
compadd -M L:|[nN][oO]= M:_= M:{[:upper:]}={[:lower:]} - \
${(k)options}
The rst part says that the pattern [nN][oO] at the beginning (the empty anchor before the
pipe symbol) of the string on the line matches the empty string in the list of words generated
by completion, so it will be ignored if present. The second part does the same for an underscore
anywhere in the command line string, and the third part uses correspondence classes so that
any upper case letter on the line matches the corresponding lower case letter in the word. The
use of the upper case forms of the specication characters (L and M) guarantees that what has
already been typed on the command line (in particular the prex no) will not be deleted.
Note that the use of L in the rst part means that it matches only when at the beginning of
both the command line string and the trial completion. I.e., the string _NO_f would not be
completed to _NO_foo, nor would NONO_f be completed to NONO_foo because of the leading
underscore or the second NO on the line which makes the pattern fail even though they are
otherwise ignored. To x this, one would use B:[nN][oO]= instead of the rst part. As
described above, this matches at the beginning of the trial completion, independent of other
characters or substrings at the beginning of the command line word which are ignored by the
same or other match-specs.
The second example makes completion case insensitive. This is just the same as in the option
example, except here we wish to retain the characters in the list of completions:
compadd -M m:{[:lower:]}={[:upper:]} ...
This makes lower case letters match their upper case counterparts. To make upper case letters
match the lower case forms as well:
compadd -M m:{[:lower:][:upper:]}={[:upper:][:lower:]} ...
A nice example for the use of * patterns is partial word completion. Sometimes you would like
to make strings like c.s.u complete to strings like comp.source.unix, i.e. the word on the
Chapter 19: Completion Widgets 190
command line consists of multiple parts, separated by a dot in this example, where each part
should be completed separately note, however, that the case where each part of the word, i.e.
comp, source and unix in this example, is to be completed from separate sets of matches is
a dierent problem to be solved by the implementation of the completion widget. The example
can be handled by:
compadd -M r:|.=* r:|=* \
- comp.sources.unix comp.sources.misc ...
The rst specication says that lpat is the empty string, while anchor is a dot; tpat is *, so this
can match anything except for the . from the anchor in the trial completion word. So in c.s.u,
the matcher sees c, followed by the empty string, followed by the anchor ., and likewise for the
second dot, and replaces the empty strings before the anchors, giving c[omp].s[ources].u[nix],
where the last part of the completion is just as normal.
With the pattern shown above, the string c.u could not be completed to comp.sources.unix
because the single star means that no dot (matched by the anchor) can be skipped. By using
two stars as in r:|.=**, however, c.u could be completed to comp.sources.unix. This
also shows that in some cases, especially if the anchor is a real pattern, like a character class,
the form with two stars may result in more matches than one would like.
The second specication is needed to make this work when the cursor is in the middle of the
string on the command line and the option COMPLETE_IN_WORD is set. In this case the completion
code would normally try to match trial completions that end with the string as typed so far, i.e.
it will only insert new characters at the cursor position rather than at the end. However in our
example we would like the code to recognise matches which contain extra characters after the
string on the line (the nix in the example). Hence we say that the empty string at the end of
the string on the line matches any characters at the end of the trial completion.
More generally, the specication
compadd -M r:|[.,_-]=* r:|=* ...
allows one to complete words with abbreviations before any of the characters in the square
brackets. For example, to complete veryverylongfile.c rather than veryverylongheader.h
with the above in eect, you can just type very.c before attempting completion.
The specications with both a left and a right anchor are useful to complete partial words whose
parts are not separated by some special character. For example, in some places strings have to
be completed that are formed LikeThis (i.e. the separate parts are determined by a leading
upper case letter) or maybe one has to complete strings with trailing numbers. Here one could
use the simple form with only one anchor as in:
compadd -M r:|[[:upper:]0-9]=* r:|=* LikeTHIS FooHoo 5foo123 5bar234
But with this, the string H would neither complete to FooHoo nor to LikeTHIS because in
each case there is an upper case letter before the H and that is matched by the anchor. Likewise,
a 2 would not be completed. In both cases this could be changed by using r:|[[:upper:]0-
9]=**, but then H completes to both LikeTHIS and FooHoo and a 2 matches the other
strings because characters can be inserted before every upper case letter and digit. To avoid
this one would use:
compadd -M r:[^[:upper:]0-9]||[[:upper:]0-9]=** r:|=* \
LikeTHIS FooHoo foo123 bar234
By using these two anchors, a H matches only upper case Hs that are immediately preceded
by something matching the left anchor [^[:upper:]0-9]. The eect is, of course, that H
matches only the string FooHoo, a 2 matches only bar234 and so on.
When using the completion system (see Chapter 20 [Completion System], page 191), users can
dene match specications that are to be used for specic contexts by using the matcher and
matcher-list styles. The values for the latter will be used everywhere.
Chapter 20: Completion System 191
19.6 Completion Widget Example
The rst step is to dene the widget:
zle -C complete complete-word complete-files
Then the widget can be bound to a key using the bindkey builtin command:
bindkey ^X\t complete
After that the shell function complete-files will be invoked after typing control-X and TAB.
The function should then generate the matches, e.g.:
complete-files () { compadd - * }
This function will complete les in the current directory matching the current word.
20 Completion System
20.1 Description
This describes the shell code for the new completion system, referred to as compsys. It is
written in shell functions based on the features described in the previous chapter, Chapter 19
[Completion Widgets], page 176.
The features are contextual, sensitive to the point at which completion is started. Many com-
pletions are already provided. For this reason, a user can perform a great many tasks without
knowing any details beyond how to initialize the system, which is described in Section 20.2
[Initialization], page 192.
The context that decides what completion is to be performed may be
an argument or option position: these describe the position on the command line at which
completion is requested. For example rst argument to rmdir, the word being completed
names a directory;
a special context, denoting an element in the shells syntax. For example a word in com-
mand position or an array subscript.
A full context specication contains other elements, as we shall describe.
Besides commands names and contexts, the system employs two more concepts, styles and tags.
These provide ways for the user to congure the systems behaviour.
Tags play a dual role. They serve as a classication system for the matches, typically indicating
a class of object that the user may need to distinguish. For example, when completing arguments
of the ls command the user may prefer to try files before directories, so both of these are
tags. They also appear as the rightmost element in a context specication.
Styles modify various operations of the completion system, such as output formatting, but also
what kinds of completers are used (and in what order), or which tags are examined. Styles may
accept arguments and are manipulated using the zstyle command described in Section 22.34
[The zsh/zutil Module], page 304.
In summary, tags describe what the completion objects are, and style how they are to be com-
pleted. At various points of execution, the completion system checks what styles and/or tags
are dened for the current context, and uses that to modify its behavior. The full description
of context handling, which determines how tags and other elements of the context inuence the
behaviour of styles, is described in Section 20.3 [Completion System Conguration], page 197.
Chapter 20: Completion System 192
When a completion is requested, a dispatcher function is called; see the description of
_main_complete in the list of control functions below. This dispatcher decides which func-
tion should be called to produce the completions, and calls it. The result is passed to one or
more completers, functions that implement individual completion strategies: simple completion,
error correction, completion with error correction, menu selection, etc.
More generally, the shell functions contained in the completion system are of two types:
those beginning comp are to be called directly; there are only a few of these;
those beginning _ are called by the completion code. The shell functions of this set,
which implement completion behaviour and may be bound to keystrokes, are referred to as
widgets. These proliferate as new completions are required.
20.2 Initialization
If the system was installed completely, it should be enough to call the shell function compinit
from your initialization le; see the next section. However, the function compinstall can be
run by a user to congure various aspects of the completion system.
Usually, compinstall will insert code into .zshrc, although if that is not writable it will save
it in another le and tell you that les location. Note that it is up to you to make sure that
the lines added to .zshrc are actually run; you may, for example, need to move them to an
earlier place in the le if .zshrc usually returns early. So long as you keep them all together
(including the comment lines at the start and nish), you can rerun compinstall and it will
correctly locate and modify these lines. Note, however, that any code you add to this section by
hand is likely to be lost if you rerun compinstall, although lines using the command zstyle
should be gracefully handled.
The new code will take eect next time you start the shell, or run .zshrc by hand; there is
also an option to make them take eect immediately. However, if compinstall has removed
denitions, you will need to restart the shell to see the changes.
To run compinstall you will need to make sure it is in a directory mentioned in your fpath
parameter, which should already be the case if zsh was properly congured as long as your
startup les do not remove the appropriate directories from fpath. Then it must be autoloaded
(autoload -U compinstall is recommended). You can abort the installation any time you
are being prompted for information, and your .zshrc will not be altered at all; changes only
take place right at the end, where you are specically asked for conrmation.
20.2.1 Use of compinit
This section describes the use of compinit to initialize completion for the current session when
called directly; if you have run compinstall it will be called automatically from your .zshrc.
To initialize the system, the function compinit should be in a directory mentioned in the fpath
parameter, and should be autoloaded (autoload -U compinit is recommended), and then run
simply as compinit. This will dene a few utility functions, arrange for all the necessary shell
functions to be autoloaded, and will then re-dene all widgets that do completion to use the new
system. If you use the menu-select widget, which is part of the zsh/complist module, you
should make sure that that module is loaded before the call to compinit so that that widget
is also re-dened. If completion styles (see below) are set up to perform expansion as well as
completion by default, and the TAB key is bound to expand-or-complete, compinit will rebind
it to complete-word; this is necessary to use the correct form of expansion.
Should you need to use the original completion commands, you can still bind keys to the old
widgets by putting a . in front of the widget name, e.g. .expand-or-complete.
Chapter 20: Completion System 193
To speed up the running of compinit, it can be made to produce a dumped conguration that
will be read in on future invocations; this is the default, but can be turned o by calling compinit
with the option -D. The dumped le is .zcompdump in the same directory as the startup les
(i.e. $ZDOTDIR or $HOME); alternatively, an explicit le name can be given by compinit -d
dumple. The next invocation of compinit will read the dumped le instead of performing a
full initialization.
If the number of completion les changes, compinit will recognise this and produce a new dump
le. However, if the name of a function or the arguments in the rst line of a #compdef function
(as described below) change, it is easiest to delete the dump le by hand so that compinit will
re-create it the next time it is run. The check performed to see if there are new functions can
be omitted by giving the option -C. In this case the dump le will only be created if there isnt
one already.
The dumping is actually done by another function, compdump, but you will only need to run this
yourself if you change the conguration (e.g. using compdef) and then want to dump the new
one. The name of the old dumped le will be remembered for this purpose.
If the parameter _compdir is set, compinit uses it as a directory where completion functions
can be found; this is only necessary if they are not already in the function search path.
For security reasons compinit also checks if the completion system would use les not owned by
root or by the current user, or les in directories that are world- or group-writable or that are
not owned by root or by the current user. If such les or directories are found, compinit will ask
if the completion system should really be used. To avoid these tests and make all les found be
used without asking, use the option -u, and to make compinit silently ignore all insecure les
and directories use the option -i. This security check is skipped entirely when the -C option is
given.
The security check can be retried at any time by running the function compaudit. This is
the same check used by compinit, but when it is executed directly any changes to fpath
are made local to the function so they do not persist. The directories to be checked may be
passed as arguments; if none are given, compaudit uses fpath and _compdir to nd completion
system directories, adding missing ones to fpath as necessary. To force a check of exactly the
directories currently named in fpath, set _compdir to an empty string before calling compaudit
or compinit.
The function bashcompinit provides compatibility with bashs programmable completion sys-
tem. When run it will dene the functions, compgen and complete which correspond to the
bash builtins with the same names. It will then be possible to use completion specications and
functions written for bash.
20.2.2 Autoloaded les
The convention for autoloaded functions used in completion is that they start with an underscore;
as already mentioned, the fpath/FPATH parameter must contain the directory in which they are
stored. If zsh was properly installed on your system, then fpath/FPATH automatically contains
the required directories for the standard functions.
For incomplete installations, if compinit does not nd enough les beginning with an underscore
(fewer than twenty) in the search path, it will try to nd more by adding the directory _compdir
to the search path. If that directory has a subdirectory named Base, all subdirectories will
be added to the path. Furthermore, if the subdirectory Base has a subdirectory named Core,
compinit will add all subdirectories of the subdirectories is to the path: this allows the functions
to be in the same format as in the zsh source distribution.
When compinit is run, it searches all such les accessible via fpath/FPATH and reads the rst
line of each of them. This line should contain one of the tags described below. Files whose rst
Chapter 20: Completion System 194
line does not start with one of these tags are not considered to be part of the completion system
and will not be treated specially.
The tags are:
#compdef names... [ -[pP] patterns... [ -N names... ] ]
The le will be made autoloadable and the function dened in it will be called when
completing names, each of which is either the name of a command whose arguments
are to be completed or one of a number of special contexts in the form -context-
described below.
Each name may also be of the form cmd=service. When completing the command
cmd, the function typically behaves as if the command (or special context) service
was being completed instead. This provides a way of altering the behaviour of
functions that can perform many dierent completions. It is implemented by setting
the parameter $service when calling the function; the function may choose to
interpret this how it wishes, and simpler functions will probably ignore it.
If the #compdef line contains one of the options -p or -P, the words following are
taken to be patterns. The function will be called when completion is attempted for
a command or context that matches one of the patterns. The options -p and -P are
used to specify patterns to be tried before or after other completions respectively.
Hence -P may be used to specify default actions.
The option -N is used after a list following -p or -P; it species that remaining
words no longer dene patterns. It is possible to toggle between the three options
as many times as necessary.
#compdef -k style key-sequences...
This option creates a widget behaving like the builtin widget style and binds it to
the given key-sequences, if any. The style must be one of the builtin widgets that
perform completion, namely complete-word, delete-char-or-list, expand-or-
complete, expand-or-complete-prefix, list-choices, menu-complete, menu-
expand-or-complete, or reverse-menu-complete. If the zsh/complist module
is loaded (see Section 22.7 [The zsh/complist Module], page 266) the widget menu-
select is also available.
When one of the key-sequences is typed, the function in the le will be invoked to
generate the matches. Note that a key will not be re-bound if it already was (that
is, was bound to something other than undefined-key). The widget created has
the same name as the le and can be bound to any other keys using bindkey as
usual.
#compdef -K widget-name style key-sequences ...
This is similar to -k except that only one key-sequences argument may be given for
each widget-name style pair. However, the entire set of three arguments may be
repeated with a dierent set of arguments. Note in particular that the widget-name
must be distinct in each set. If it does not begin with _ this will be added. The
widget-name should not clash with the name of any existing widget: names based
on the name of the function are most useful. For example,
#compdef -K _foo_complete complete-word "^X^C" \
_foo_list list-choices "^X^D"
(all on one line) denes a widget _foo_complete for completion, bound to ^X^C,
and a widget _foo_list for listing, bound to ^X^D.
#autoload [ options ]
Functions with the #autoload tag are marked for autoloading but are not otherwise
treated specially. Typically they are to be called from within one of the completion
Chapter 20: Completion System 195
functions. Any options supplied will be passed to the autoload builtin; a typical
use is +X to force the function to be loaded immediately. Note that the -U and -z
ags are always added implicitly.
The # is part of the tag name and no white space is allowed after it. The #compdef tags use
the compdef function described below; the main dierence is that the name of the function is
supplied implicitly.
The special contexts for which completion functions can be dened are:
-array-value-
The right hand side of an array-assignment (foo=(...))
-brace-parameter-
The name of a parameter expansion within braces (${...})
-assign-parameter-
The name of a parameter in an assignment, i.e. on the left hand side of an =
-command-
A word in command position
-condition-
A word inside a condition ([[...]])
-default-
Any word for which no other completion is dened
-equal- A word beginning with an equals sign
-first- This is tried before any other completion function. The function called may set
the _compskip parameter to one of various values: all: no further completion
is attempted; a string containing the substring patterns: no pattern completion
functions will be called; a string containing default: the function for the -default-
context will not be called, but functions dened for commands will
-math- Inside mathematical contexts, such as ((...))
-parameter-
The name of a parameter expansion ($...)
-redirect-
The word after a redirection operator.
-subscript-
The contents of a parameter subscript.
-tilde- After an initial tilde (~), but before the rst slash in the word.
-value- On the right hand side of an assignment.
Default implementations are supplied for each of these contexts. In most cases the context
-context- is implemented by a corresponding function _context, for example the context -
tilde- and the function _tilde).
The contexts -redirect- and -value- allow extra context-specic information. (Internally,
this is handled by the functions for each context calling the function _dispatch.) The extra
information is added separated by commas.
For the -redirect- context, the extra information is in the form -redirect-,op,command,
where op is the redirection operator and command is the name of the command on the line. If
there is no command on the line yet, the command eld will be empty.
Chapter 20: Completion System 196
For the -value- context, the form is -value-,name,command, where name is the name of
the parameter. In the case of elements of an associative array, for example assoc=(key <TAB>,
name is expanded to name-key. In certain special contexts, such as completing after make
CFLAGS=, the command part gives the name of the command, here make; otherwise it is empty.
It is not necessary to dene fully specic completions as the functions provided will try to
generate completions by progressively replacing the elements with -default-. For example,
when completing after foo=<TAB>, _value will try the names -value-,foo, (note the empty
command part), -value-,foo,-default- and-value-,-default-,-default-, in that order,
until it nds a function to handle the context.
As an example:
compdef _files -g "*.log" -redirect-,2>,-default-
completes les matching *.log after 2> <TAB> for any command with no more specic handler
dened.
Also:
compdef _foo -value-,-default-,-default-
species that _foo provides completions for the values of parameters for which no special function
has been dened. This is usually handled by the function _value itself.
The same lookup rules are used when looking up styles (as described below); for example
zstyle :completion:*:*:-redirect-,2>,*:* file-patterns *.log
is another way to make completion after 2> <TAB> complete les matching *.log.
20.2.3 Functions
The following function is dened by compinit and may be called directly.
compdef [ -ane ] function names... [ -[pP] patterns... [ -N names... ] ]
compdef -d names...
compdef -k [ -an ] function style key-sequences...
compdef -K [ -an ] function name style key-sequences ...
The rst form denes the function to call for completion in the given contexts as
described for the #compdef tag above.
Alternatively, all the arguments may have the form cmd=service. Here service
should already have been dened by cmd1=service lines in #compdef les, as de-
scribed above. The argument for cmd will be completed in the same way as service.
The function argument may alternatively be a string containing almost any shell
code. If the string contains an equal sign, the above will take precedence. The
option -e may be used to specify the rst argument is to be evaluated as shell
code even if it contains an equal sign. The string will be executed using the eval
builtin command to generate completions. This provides a way of avoiding having
to dene a new completion function. For example, to complete les ending in .h
as arguments to the command foo:
compdef _files -g "*.h" foo
The option -n prevents any completions already dened for the command or context
from being overwritten.
The option -d deletes any completion dened for the command or contexts listed.
The names may also contain -p, -P and -N options as described for the #compdef
tag. The eect on the argument list is identical, switching between denitions of
patterns tried initially, patterns tried nally, and normal commands and contexts.
Chapter 20: Completion System 197
The parameter $_compskip may be set by any function dened for a pattern context.
If it is set to a value containing the substring patterns none of the pattern-
functions will be called; if it is set to a value containing the substring all, no other
function will be called.
The form with -k denes a widget with the same name as the function that will be
called for each of the key-sequences; this is like the #compdef -k tag. The function
should generate the completions needed and will otherwise behave like the builtin
widget whose name is given as the style argument. The widgets usable for this
are: complete-word, delete-char-or-list, expand-or-complete, expand-or-
complete-prefix, list-choices, menu-complete, menu-expand-or-complete,
and reverse-menu-complete, as well as menu-select if the zsh/complist module
is loaded. The option -n prevents the key being bound if it is already to bound to
something other than undefined-key.
The form with -K is similar and denes multiple widgets based on the same function,
each of which requires the set of three arguments name, style and key-sequences,
where the latter two are as for -k and the rst must be a unique widget name
beginning with an underscore.
Wherever applicable, the -a option makes the function autoloadable, equivalent to
autoload -U function.
The function compdef can be used to associate existing completion functions with new com-
mands. For example,
compdef _pids foo
uses the function _pids to complete process IDs for the command foo.
Note also the _gnu_generic function described below, which can be used to complete options
for commands that understand the --help option.
20.3 Completion System Conguration
This section gives a short overview of how the completion system works, and then more detail
on how users can congure how and when matches are generated.
20.3.1 Overview
When completion is attempted somewhere on the command line the completion system rst
works out the context. This takes account of a number of things including the command word
(such as grep or zsh) and options to which the current word may be an argument (such as
the -o option to zsh which takes a shell option as an argument).
This context information is condensed into a string consisting of multiple elds separated by
colons, referred to simply as the context in the remainder of the documentation. This is used
to look up styles, context-sensitive options that can be used to congure the completion system.
The context used for lookup may vary during the same call to the completion system.
The context string always consists of a xed set of elds, separated by colons and with a leading
colon before the rst, in the form :completion:function:completer:command:argument:tag.
These have the following meaning:
The literal string completion, saying that this style is used by the completion system. This
distinguishes the context from those used by, for example, zle widgets and ZFTP functions.
The function, if completion is called from a named widget rather than through the normal
completion system. Typically this is blank, but it is set by special widgets such as predict-
on and the various functions in the Widget directory of the distribution to the name of that
function, often in an abbreviated form.
Chapter 20: Completion System 198
The completer currently active, the name of the function without the leading underscore
and with other underscores converted to hyphens. A completer is in overall control of how
completion is to be performed; complete is the simplest, but other completers exist to
perform related tasks such as correction, or to modify the behaviour of a later completer.
See Section 20.4 [Control Functions], page 225 for more information.
The command or a special -context-, just at it appears following the #compdef tag or the
compdef function. Completion functions for commands that have sub-commands usually
modify this eld to contain the name of the command followed by a minus sign and the
sub-command. For example, the completion function for the cvs command sets this eld
to cvs-add when completing arguments to the add subcommand.
The argument; this indicates which command line or option argument we are completing.
For command arguments this generally takes the form argument-n, where n is the number of
the argument, and for arguments to options the form option-opt-n where n is the number
of the argument to option opt. However, this is only the case if the command line is parsed
with standard UNIX-style options and arguments, so many completions do not set this.
The tag. As described previously, tags are used to discriminate between the types of matches
a completion function can generate in a certain context. Any completion function may use
any tag name it likes, but a list of the more common ones is given below.
The context is gradually put together as the functions are executed, starting with the main
entry point, which adds :completion: and the function element if necessary. The completer
then adds the completer element. The contextual completion adds the command and argument
options. Finally, the tag is added when the types of completion are known. For example, the
context name
:completion::complete:dvips:option-o-1:files
says that normal completion was attempted as the rst argument to the option -o of the com-
mand dvips:
dvips -o ...
and the completion function will generate lenames.
Usually completion will be tried for all possible tags in an order given by the completion function.
However, this can be altered by using the tag-order style. Completion is then restricted to the
list of given tags in the given order.
The _complete_help bindable command shows all the contexts and tags available for completion
at a particular point. This provides an easy way of nding information for tag-order and other
styles. It is described in Section 20.5 [Bindable Commands], page 230.
Styles determine such things as how the matches are generated, similarly to shell options but
with much more control. They can have any number of strings as their value. They are dened
with the zstyle builtin command (Section 22.34 [The zsh/zutil Module], page 304).
When looking up styles the completion system uses full context names, including the tag. Look-
ing up the value of a style therefore consists of two things: the context, which may be matched
as a pattern, and the name of the style itself, which must be given exactly.
For example, many completion functions can generate matches in a simple and a verbose form
and use the verbose style to decide which form should be used. To make all such functions use
the verbose form, put
zstyle :completion:* verbose yes
in a startup le (probably .zshrc). This gives the verbose style the value yes in every context
inside the completion system, unless that context has a more specic denition. It is best to
avoid giving the context as * in case the style has some meaning outside the completion system.
Many such general purpose styles can be congured simply by using the compinstall function.
Chapter 20: Completion System 199
A more specic example of the use of the verbose style is by the completion for the kill builtin.
If the style is set, the builtin lists full job texts and process command lines; otherwise it shows
the bare job numbers and PIDs. To turn the style o for this use only:
zstyle :completion:*:*:kill:* verbose no
For even more control, the style can use one of the tags jobs or processes. To turn o
verbose display only for jobs:
zstyle :completion:*:*:kill:*:jobs verbose no
The -e option to zstyle even allows completion function code to appear as the argument to a
style; this requires some understanding of the internals of completion functions (see Chapter 19
[Completion Widgets], page 176)). For example,
zstyle -e :completion:* hosts reply=($myhosts)
This forces the value of the hosts style to be read from the variable myhosts each time a host
name is needed; this is useful if the value of myhosts can change dynamically. For another useful
example, see the example in the description of the file-list style below. This form can be
slow and should be avoided for commonly examined styles such as menu and list-rows-first.
Note that the order in which styles are dened does not matter; the style mechanism uses the
most specic possible match for a particular style to determine the set of values. More precisely,
strings are preferred over patterns (for example, :completion::complete:foo is more specic
than :completion::complete:*), and longer patterns are preferred over shorter patterns.
Style names like those of tags are arbitrary and depend on the completion function. However,
the following two sections list some of the most common tags and styles.
20.3.2 Standard Tags
Some of the following are only used when looking up particular styles and do not refer to a type
of match.
accounts used to look up the users-hosts style
all-expansions
used by the _expand completer when adding the single string containing all possible
expansions
all-files
for the names of all les (as distinct from a particular subset, see the globbed-files
tag).
arguments
for arguments to a command
arrays for names of array parameters
association-keys
for keys of associative arrays; used when completing inside a subscript to a parameter
of this type
bookmarks
when completing bookmarks (e.g. for URLs and the zftp function suite)
builtins for names of builtin commands
characters
for single characters in arguments of commands such as stty. Also used when
completing character classes after an opening bracket
Chapter 20: Completion System 200
colormapids
for X colormap ids
colors for color names
commands for names of external commands. Also used by complex commands such as cvs
when completing names subcommands.
contexts for contexts in arguments to the zstyle builtin command
corrections
used by the _approximate and _correct completers for possible corrections
cursors for cursor names used by X programs
default used in some contexts to provide a way of supplying a default when more specic
tags are also valid. Note that this tag is used when only the function eld of the
context name is set
descriptions
used when looking up the value of the format style to generate descriptions for
types of matches
devices for names of device special les
directories
for names of directories local-directories is used instead when completing
arguments of cd and related builtin commands when the cdpath array is set
directory-stack
for entries in the directory stack
displays for X display names
domains for network domains
expansions
used by the _expand completer for individual words (as opposed to the complete
set of expansions) resulting from the expansion of a word on the command line
extensions
for X server extensions
file-descriptors
for numbers of open le descriptors
files the generic le-matching tag used by functions completing lenames
fonts for X font names
fstypes for le system types (e.g. for the mount command)
functions
names of functions normally shell functions, although certain commands may
understand other kinds of function
globbed-files
for lenames when the name has been generated by pattern matching
groups for names of user groups
history-words
for words from the history
hosts for hostnames
Chapter 20: Completion System 201
indexes for array indexes
jobs for jobs (as listed by the jobs builtin)
interfaces
for network interfaces
keymaps for names of zsh keymaps
keysyms for names of X keysyms
libraries
for names of system libraries
limits for system limits
local-directories
for names of directories that are subdirectories of the current working directory
when completing arguments of cd and related builtin commands (compare path-
directories) when the cdpath array is unset, directories is used instead
manuals for names of manual pages
mailboxes
for e-mail folders
maps for map names (e.g. NIS maps)
messages used to look up the format style for messages
modifiers
for names of X modiers
modules for modules (e.g. zsh modules)
my-accounts
used to look up the users-hosts style
named-directories
for named directories (you wouldnt have guessed that, would you?)
names for all kinds of names
newsgroups
for USENET groups
nicknames
for nicknames of NIS maps
options for command options
original used by the _approximate, _correct and _expand completers when oering the
original string as a match
other-accounts
used to look up the users-hosts style
other-files
for the names of any non-directory les. This is used instead of all-files when
the list-dirs-first style is in eect.
packages for packages (e.g. rpm or installed Debian packages)
parameters
for names of parameters
Chapter 20: Completion System 202
path-directories
for names of directories found by searching the cdpath array when completing ar-
guments of cd and related builtin commands (compare local-directories)
paths used to look up the values of the expand, ambiguous and special-dirs styles
pods for perl pods (documentation les)
ports for communication ports
prefixes for prexes (like those of a URL)
printers for print queue names
processes
for process identiers
processes-names
used to look up the command style when generating the names of processes for
killall
sequences
for sequences (e.g. mh sequences)
sessions for sessions in the zftp function suite
signals for signal names
strings for strings (e.g. the replacement strings for the cd builtin command)
styles for styles used by the zstyle builtin command
suffixes for lename extensions
tags for tags (e.g. rpm tags)
targets for makele targets
time-zones
for time zones (e.g. when setting the TZ parameter)
types for types of whatever (e.g. address types for the xhost command)
urls used to look up the urls and local styles when completing URLs
users for usernames
values for one of a set of values in certain lists
variant used by _pick_variant to look up the command to run when determining what
program is installed for a particular command name.
visuals for X visuals
warnings used to look up the format style for warnings
widgets for zsh widget names
windows for IDs of X windows
zsh-options
for shell options
Chapter 20: Completion System 203
20.3.3 Standard Styles
Note that the values of several of these styles represent boolean values. Any of the strings true,
on, yes, and 1 can be used for the value true and any of the strings false, off, no, and
0 for the value false. The behavior for any other value is undened except where explicitly
mentioned. The default value may be either true or false if the style is not set.
Some of these styles are tested rst for every possible tag corresponding to a type of match,
and if no style was found, for the default tag. The most notable styles of this type are menu,
list-colors and styles controlling completion listing such as list-packed and last-prompt.
When tested for the default tag, only the function eld of the context will be set so that a
style using the default tag will normally be dened along the lines of:
zstyle :completion:*:default menu ...
accept-exact
This is tested for the default tag in addition to the tags valid for the current context.
If it is set to true and any of the trial matches is the same as the string on the
command line, this match will immediately be accepted (even if it would otherwise
be considered ambiguous).
When completing pathnames (where the tag used is paths) this style accepts any
number of patterns as the value in addition to the boolean values. Pathnames
matching one of these patterns will be accepted immediately even if the command
line contains some more partially typed pathname components and these match no
le under the directory accepted.
This style is also used by the _expand completer to decide if words beginning with
a tilde or parameter expansion should be expanded. For example, if there are
parameters foo and foobar, the string $foo will only be expanded if accept-
exact is set to true; otherwise the completion system will be allowed to complete
$foo to $foobar. If the style is set to continue, expand will add the expansion as
a match and the completion system will also be allowed to continue.
accept-exact-dirs
This is used by lename completion. Unlike accept-exact it is a boolean. By
default, lename completion examines all components of a path to see if there are
completions of that component, even if the component matches an existing directory.
For example, when completion after /usr/bin/, the function examines possible
completions to /usr.
When this style is true, any prex of a path that matches an existing directory is
accepted without any attempt to complete it further. Hence, in the given example,
the path /usr/bin/ is accepted immediately and completion tried in that directory.
If you wish to inhibit this behaviour entirely, set the path-completion style (see
below) to false.
add-space
This style is used by the _expand completer. If it is true (the default), a space will
be inserted after all words resulting from the expansion, or a slash in the case of
directory names. If the value is file, the completer will only add a space to names
of existing les. Either a boolean true or the value file may be combined with
subst, in which case the completer will not add a space to words generated from
the expansion of a substitution of the form $(...) or ${...}.
The _prefix completer uses this style as a simple boolean value to decide if a space
should be inserted before the sux.
Chapter 20: Completion System 204
ambiguous
This applies when completing non-nal components of lename paths, in other words
those with a trailing slash. If it is set, the cursor is left after the rst ambiguous
component, even if menu completion is in use. The style is always tested with the
paths tag.
assign-list
When completing after an equals sign that is being treated as an assignment, the
completion system normally completes only one lename. In some cases the value
may be a list of lenames separated by colons, as with PATH and similar parameters.
This style can be set to a list of patterns matching the names of such parameters.
The default is to complete lists when the word on the line already contains a colon.
auto-description
If set, this styles value will be used as the description for options that are not
described by the completion functions, but that have exactly one argument. The
sequence %d in the value will be replaced by the description for this argument.
Depending on personal preferences, it may be useful to set this style to something
like specify: %d. Note that this may not work for some commands.
avoid-completer
This is used by the _all_matches completer to decide if the string consisting of all
matches should be added to the list currently being generated. Its value is a list of
names of completers. If any of these is the name of the completer that generated
the matches in this completion, the string will not be added.
The default value for this style is _expand _old_list _correct _approximate,
i.e. it contains the completers for which a string with all matches will almost never
be wanted.
cache-path
This style denes the path where any cache les containing dumped completion
data are stored. It defaults to $ZDOTDIR/.zcompcache, or $HOME/.zcompcache
if $ZDOTDIR is not dened. The completion cache will not be used unless the use-
cache style is set.
cache-policy
This style denes the function that will be used to determine whether a cache needs
rebuilding. See the section on the _cache_invalid function below.
call-command
This style is used in the function for commands such as make and ant where calling
the command directly to generate matches suers problems such as being slow or,
as in the case of make can potentially cause actions in the makele to be executed.
If it is set to true the command is called to generate matches. The default value
of this style is false.
command In many places, completion functions need to call external commands to generate
the list of completions. This style can be used to override the command that is
called in some such cases. The elements of the value are joined with spaces to
form a command line to execute. The value can also start with a hyphen, in which
case the usual command will be added to the end; this is most useful for putting
builtin or command in front to make sure the appropriate version of a command
is called, for example to avoid calling a shell function with the same name as an
external command.
As an example, the completion function for process IDs uses this style with the
processes tag to generate the IDs to complete and the list of processes to display
Chapter 20: Completion System 205
(if the verbose style is true). The list produced by the command should look like
the output of the ps command. The rst line is not displayed, but is searched for
the string PID (or pid) to nd the position of the process IDs in the following
lines. If the line does not contain PID, the rst numbers in each of the other lines
are taken as the process IDs to complete.
Note that the completion function generally has to call the specied command for
each attempt to generate the completion list. Hence care should be taken to specify
only commands that take a short time to run, and in particular to avoid any that
may never terminate.
command-path
This is a list of directories to search for commands to complete. The default for this
style is the value of the special parameter path.
commands This is used by the function completing sub-commands for the system initialisation
scripts (residing in /etc/init.d or somewhere not too far away from that). Its
values give the default commands to complete for those commands for which the
completion function isnt able to nd them out automatically. The default for this
style are the two strings start and stop.
complete This is used by the _expand_alias function when invoked as a bindable command.
If set to true and the word on the command line is not the name of an alias,
matching alias names will be completed.
complete-options
This is used by the completer for cd, chdir and pushd. For these commands a
- is used to introduce a directory stack entry and completion of these is far more
common than completing options. Hence unless the value of this style is true options
will not be completed, even after an initial -. If it is true, options will be completed
after an initial - unless there is a preceding -- on the command line.
completer
The strings given as the value of this style provide the names of the completer
functions to use. The available completer functions are described in Section 20.4
[Control Functions], page 225.
Each string may be either the name of a completer function or a string of the form
function:name. In the rst case the completer eld of the context will contain the
name of the completer without the leading underscore and with all other underscores
replaced by hyphens. In the second case the function is the name of the completer
to call, but the context will contain the user-dened name in the completer eld of
the context. If the name starts with a hyphen, the string for the context will be
build from the name of the completer function as in the rst case with the name
appended to it. For example:
zstyle :completion:* completer _complete _complete:-foo
Here, completion will call the _complete completer twice, once using complete
and once using complete-foo in the completer eld of the context. Normally,
using the same completer more than once only makes sense when used with the
functions:name form, because otherwise the context name will be the same in all
calls to the completer; possible exceptions to this rule are the _ignored and _prefix
completers.
The default value for this style is _complete _ignored: only completion will be
done, rst using the ignored-patterns style and the $fignore array and then
without ignoring matches.
Chapter 20: Completion System 206
condition
This style is used by the _list completer function to decide if insertion of matches
should be delayed unconditionally. The default is true.
delimiters
This style is used when adding a delimiter for use with history modiers or glob
qualiers that have delimited arguments. It is an array of preferred delimiters to
add. Non-special characters are preferred as the completion system may otherwise
become confused. The default list is :, +, /, -, %. The list may be empty to force a
delimiter to be typed.
disabled If this is set to true, the _expand_alias completer and bindable command will try
to expand disabled aliases, too. The default is false.
domains A list of names of network domains for completion. If this is not set, domain names
will be taken from the le /etc/resolv.conf.
environ The environ style is used when completing for sudo. It is set to an array of
VAR=value assignments to be exported into the local environment before the com-
pletion for the target command is invoked.
zstyle :completion:*:sudo:: environ \
PATH="/sbin:/usr/sbin:$PATH" HOME="/root"
expand This style is used when completing strings consisting of multiple parts, such as path
names.
If one of its values is the string prefix, the partially typed word from the line will
be expanded as far as possible even if trailing parts cannot be completed.
If one of its values is the string suffix, matching names for components after the
rst ambiguous one will also be added. This means that the resulting string is the
longest unambiguous string possible. However, menu completion can be used to
cycle through all matches.
fake This style may be set for any completion context. It species additional strings
that will always be completed in that context. The form of each string is
value:description; the colon and description may be omitted, but any literal colons
in value must be quoted with a backslash. Any description provided is shown along-
side the value in completion listings.
It is important to use a suciently restrictive context when specifying fake strings.
Note that the styles fake-files and fake-parameters provide additional features
when completing les or parameters.
fake-always
This works identically to the fake style except that the ignored-patterns style is
not applied to it. This makes it possible to override a set of matches completely by
setting the ignored patterns to *.
The following shows a way of supplementing any tag with arbitrary data, but having
it behave for display purposes like a separate tag. In this example we use the
features of the tag-order style to divide the named-directories tag into two
when performing completion with the standard completer complete for arguments
of cd. The tag named-directories-normal behaves as normal, but the tag named-
directories-mine contains a xed set of directories. This has the eect of adding
the match group extra directories with the given completions.
zstyle :completion::complete:cd:* tag-order \
named-directories:-mine:extra\ directories
Chapter 20: Completion System 207
named-directories:-normal:named\ directories *
zstyle :completion::complete:cd:*:named-directories-mine \
fake-always mydir1 mydir2
zstyle :completion::complete:cd:*:named-directories-mine \
ignored-patterns *
fake-files
This style is used when completing les and looked up without a tag. Its values are
of the form dir:names.... This will add the names (strings separated by spaces) as
possible matches when completing in the directory dir, even if no such les really
exist. The dir may be a pattern; pattern characters or colons in dir should be quoted
with a backslash to be treated literally.
This can be useful on systems that support special le systems whose top-level
pathnames can not be listed or generated with glob patterns. It can also be used
for directories for which one does not have read permission.
The pattern form can be used to add a certain magic entry to all directories on a
particular le system.
fake-parameters
This is used by the completion function for parameter names. Its values are names
of parameters that might not yet be set but should be completed nonetheless. Each
name may also be followed by a colon and a string specifying the type of the pa-
rameter (like scalar, array or integer). If the type is given, the name will
only be completed if parameters of that type are required in the particular context.
Names for which no type is specied will always be completed.
file-list
This style controls whether les completed using the standard builtin mechanism
are to be listed with a long list similar to ls -l. Note that this feature uses the shell
module zsh/stat for le information; this loads the builtin stat which will replace
any external stat executable. To avoid this the following code can be included in
an initialization le:
zmodload -i zsh/stat
disable stat
The style may either be set to a true value (or all), or one of the values insert
or list, indicating that les are to be listed in long format in all circumstances, or
when attempting to insert a le name, or when listing le names without attempting
to insert one.
More generally, the value may be an array of any of the above values, optionally
followed by =num. If num is present it gives the maximum number of matches for
which long listing style will be used. For example,
zstyle :completion:* file-list list=20 insert=10
species that long format will be used when listing up to 20 les or inserting a le
with up to 10 matches (assuming a listing is to be shown at all, for example on an
ambiguous completion), else short format will be used.
zstyle -e :completion:* file-list (( ${+NUMERIC} )) && reply=(true)
species that long format will be used any time a numeric argument is supplied, else
short format.
file-patterns
This is used by the standard function for completing lenames, _files. If the style
is unset up to three tags are oered, globbed-files,directories and all-
files, depending on the types of les expected by the caller of _files. The rst
Chapter 20: Completion System 208
two (globbed-files and directories) are normally oered together to make it
easier to complete les in sub-directories.
The file-patterns style provides alternatives to the default tags, which are not
used. Its value consists of elements of the form pattern:tag; each string may
contain any number of such specications separated by spaces.
The pattern is a pattern that is to be used to generate lenames. Any occurrence
of the sequence %p is replaced by any pattern(s) passed by the function calling
_files. Colons in the pattern must be preceded by a backslash to make them
distinguishable from the colon before the tag. If more than one pattern is needed,
the patterns can be given inside braces, separated by commas.
The tags of all strings in the value will be oered by _files and used when looking
up other styles. Any tags in the same word will be oered at the same time and
before later words. If no :tag is given the files tag will be used.
The tag may also be followed by an optional second colon and a description, which
will be used for the %d in the value of the format style (if that is set) instead
of the default description supplied by the completion function. If the description
given here contains itself a %d, that is replaced with the description supplied by
the completion function.
For example, to make the rm command rst complete only names of object les and
then the names of all les if there is no matching object le:
zstyle :completion:*:*:rm:* file-patterns \
*.o:object-files %p:all-files
To alter the default behaviour of le completion oer les matching a pattern
and directories on the rst attempt, then all les to oer only matching les on
the rst attempt, then directories, and nally all les:
zstyle :completion:* file-patterns \
%p:globbed-files *(-/):directories *:all-files
This works even where there is no special pattern: _files matches all les using
the pattern * at the rst step and stops when it sees this pattern. Note also it will
never try a pattern more than once for a single completion attempt.
During the execution of completion functions, the EXTENDED_GLOB option is in eect,
so the characters #, ~ and ^ have special meanings in the patterns.
file-sort
The standard lename completion function uses this style without a tag to determine
in which order the names should be listed; menu completion will cycle through them
in the same order. The possible values are: size to sort by the size of the le;
links to sort by the number of links to the le; modification (or time or
date) to sort by the last modication time; access to sort by the last access
time; and inode (or change) to sort by the last inode change time. If the style
is set to any other value, or is unset, les will be sorted alphabetically by name.
If the value contains the string reverse, sorting is done in the opposite order. If
the value contains the string follow, timestamps are associated with the targets
of symbolic links; the default is to use the timestamps of the links themselves.
filter This is used by the LDAP plugin for e-mail address completion to specify the at-
tributes to match against when ltering entries. So for example, if the style is set
to sn, matching is done against surnames. Standard LDAP ltering is used so
normal completion matching is bypassed. If this style is not set, the LDAP plugin
is skipped. You may also need to set the command style to specify how to connect
to your LDAP server.
Chapter 20: Completion System 209
force-list
This forces a list of completions to be shown at any point where listing is done, even
in cases where the list would usually be suppressed. For example, normally the list
is only shown if there are at least two dierent matches. By setting this style to
always, the list will always be shown, even if there is only a single match that will
immediately be accepted. The style may also be set to a number. In this case the
list will be shown if there are at least that many matches, even if they would all
insert the same string.
This style is tested for the default tag as well as for each tag valid for the current
completion. Hence the listing can be forced only for certain types of match.
format If this is set for the descriptions tag, its value is used as a string to display above
matches in completion lists. The sequence %d in this string will be replaced with a
short description of what these matches are. This string may also contain the follow-
ing sequences to specify output attributes, Chapter 13 [Prompt Expansion], page 33:
%B, %S, %U, %F, %K and their lower case counterparts, as well as %{...%}. %F,
%K and %{...%} take arguments in the same form as prompt expansion. Note that
the %G sequence is not available; an argument to %{ should be used instead.
The style is tested with each tag valid for the current completion before it is tested
for the descriptions tag. Hence dierent format strings can be dened for dierent
types of match.
Note also that some completer functions dene additional %-sequences. These are
described for the completer functions that make use of them.
Some completion functions display messages that may be customised by setting this
style for the messages tag. Here, the %d is replaced with a message given by the
completion function.
Finally, the format string is looked up with the warnings tag, for use when no
matches could be generated at all. In this case the %d is replaced with the descrip-
tions for the matches that were expected separated by spaces. The sequence %D is
replaced with the same descriptions separated by newlines.
It is possible to use printf-style eld width speciers with %d and similar escape
sequences. This is handled by the zformat builtin command from the zsh/zutil
module, see Section 22.34 [The zsh/zutil Module], page 304.
glob This is used by the _expand completer. If it is set to true (the default), globbing
will be attempted on the words resulting from a previous substitution (see the
substitute style) or else the original string from the line.
global If this is set to true (the default), the _expand_alias completer and bindable
command will try to expand global aliases.
group-name
The completion system can group dierent types of matches, which appear in sepa-
rate lists. This style can be used to give the names of groups for particular tags. For
example, in command position the completion system generates names of builtin and
external commands, names of aliases, shell functions and parameters and reserved
words as possible completions. To have the external commands and shell functions
listed separately:
zstyle :completion:*:*:-command-:*:commands group-name commands
zstyle :completion:*:*:-command-:*:functions group-name functions
As a consequence, any match with the same tag will be displayed in the same group.
Chapter 20: Completion System 210
If the name given is the empty string the name of the tag for the matches will be
used as the name of the group. So, to have all dierent types of matches displayed
separately, one can just set:
zstyle :completion:* group-name
All matches for which no group name is dened will be put in a group named
-default-.
group-order
This style is additional to the group-name style to specify the order for display
of the groups dened by that style (compare tag-order, which determines which
completions appear at all). The groups named are shown in the given order; any
other groups are shown in the order dened by the completion function.
For example, to have names of builtin commands, shell functions and external com-
mands appear in that order when completing in command position:
zstyle :completion:*:*:-command-:* group-order \
builtins functions commands
groups A list of names of UNIX groups. If this is not set, group names are taken from the
YP database or the le /etc/group.
hidden If this is set to true, matches for the given context will not be listed, although any
description for the matches set with the format style will be shown. If it is set to
all, not even the description will be displayed.
Note that the matches will still be completed; they are just not shown in the list.
To avoid having matches considered as possible completions at all, the tag-order
style can be modied as described below.
hosts A list of names of hosts that should be completed. If this is not set, hostnames are
taken from the le /etc/hosts.
hosts-ports
This style is used by commands that need or accept hostnames and network ports.
The strings in the value should be of the form host:port. Valid ports are deter-
mined by the presence of hostnames; multiple ports for the same host may appear.
ignore-line
This is tested for each tag valid for the current completion. If it is set to true, none
of the words that are already on the line will be considered as possible completions.
If it is set to current, the word the cursor is on will not be considered as a
possible completion. The value current-shown is similar but only applies if the
list of completions is currently shown on the screen. Finally, if the style is set to
other, all words on the line except for the current one will be excluded from the
possible completions.
The values current and current-shown are a bit like the opposite of the accept-
exact style: only strings with missing characters will be completed.
Note that you almost certainly dont want to set this to true or other for a general
context such as :completion:*. This is because it would disallow completion of,
for example, options multiple times even if the command in question accepts the
option more than once.
ignore-parents
The style is tested without a tag by the function completing pathnames in order
to determine whether to ignore the names of directories already mentioned in the
current word, or the name of the current working directory. The value must include
one or both of the following strings:
Chapter 20: Completion System 211
parent The name of any directory whose path is already contained in the word
on the line is ignored. For example, when completing after foo/../,
the directory foo will not be considered a valid completion.
pwd The name of the current working directory will not be completed; hence,
for example, completion after ../ will not use the name of the current
directory.
In addition, the value may include one or both of:
.. Ignore the specied directories only when the word on the line contains
the substring ../.
directory
Ignore the specied directories only when names of directories are com-
pleted, not when completing names of les.
Excluded values act in a similar fashion to values of the ignored-patterns style,
so they can be restored to consideration by the _ignored completer.
extra-verbose
If set, the completion listing is more verbose at the cost of a probable decrease in
completion speed. Completion performance will suer if this style is set to true.
ignored-patterns
A list of patterns; any trial completion matching one of the patterns will be excluded
from consideration. The _ignored completer can appear in the list of completers
to restore the ignored matches. This is a more congurable version of the shell
parameter $fignore.
Note that the EXTENDED_GLOB option is set during the execution of completion func-
tions, so the characters #, ~ and ^ have special meanings in the patterns.
insert This style is used by the _all_matches completer to decide whether to insert the
list of all matches unconditionally instead of adding the list as another match.
insert-ids
When completing process IDs, for example as arguments to the kill and wait
builtins the name of a command may be converted to the appropriate process ID.
A problem arises when the process name typed is not unique. By default (or if this
style is set explicitly to menu) the name will be converted immediately to a set of
possible IDs, and menu completion will be started to cycle through them.
If the value of the style is single, the shell will wait until the user has typed
enough to make the command unique before converting the name to an ID; attempts
at completion will be unsuccessful until that point. If the value is any other string,
menu completion will be started when the string typed by the user is longer than
the common prex to the corresponding IDs.
insert-tab
If this is set to true, the completion system will insert a TAB character (assuming
that was used to start completion) instead of performing completion when there is
no non-blank character to the left of the cursor. If it is set to false, completion will
be done even there.
The value may also contain the substrings pending or pending=val. In this case,
the typed character will be inserted instead of starting completion when there is
unprocessed input pending. If a val is given, completion will not be done if there are
at least that many characters of unprocessed input. This is often useful when pasting
characters into a terminal. Note however, that it relies on the $PENDING special
Chapter 20: Completion System 212
parameter from the zsh/zle module being set properly which is not guaranteed on
all platforms.
The default value of this style is true except for completion within vared builtin
command where it is false.
insert-unambiguous
This is used by the _match and _approximate completers. These completers are
often used with menu completion since the word typed may bear little resemblance
to the nal completion. However, if this style is true, the completer will start menu
completion only if it could nd no unambiguous initial string at least as long as the
original string typed by the user.
In the case of the _approximate completer, the completer eld in the context will
already have been set to one of correct-num or approximate-num, where num is
the number of errors that were accepted.
In the case of the _match completer, the style may also be set to the string pattern.
Then the pattern on the line is left unchanged if it does not match unambiguously.
keep-prefix
This style is used by the _expand completer. If it is true, the completer will try
to keep a prex containing a tilde or parameter expansion. Hence, for example, the
string ~/f* would be expanded to ~/foo instead of /home/user/foo. If the
style is set to changed (the default), the prex will only be left unchanged if there
were other changes between the expanded words and the original word from the
command line. Any other value forces the prex to be expanded unconditionally.
The behaviour of expand when this style is true is to cause _expand to give up when
a single expansion with the restored prex is the same as the original; hence any
remaining completers may be called.
last-prompt
This is a more exible form of the ALWAYS_LAST_PROMPT option. If it is true, the
completion system will try to return the cursor to the previous command line after
displaying a completion list. It is tested for all tags valid for the current completion,
then the default tag. The cursor will be moved back to the previous line if this
style is true for all types of match. Note that unlike the ALWAYS_LAST_PROMPT
option this is independent of the numeric prex argument.
known-hosts-files
This style should contain a list of les to search for host names and (if the use-ip
style is set) IP addresses in a format compatible with ssh known_hosts les. If it is
not set, the les /etc/ssh/ssh_known_hosts and ~/.ssh/known_hosts are used.
list This style is used by the _history_complete_word bindable command. If it is set to
true it has no eect. If it is set to false matches will not be listed. This overrides
the setting of the options controlling listing behaviour, in particular AUTO_LIST.
The context always starts with :completion:history-words.
list-colors
If the zsh/complist module is loaded, this style can be used to set color speci-
cations. This mechanism replaces the use of the ZLS_COLORS and ZLS_COLOURS
parameters described in Section 22.7 [The zsh/complist Module], page 266, but the
syntax is the same.
If this style is set for the default tag, the strings in the value are taken as speci-
cations that are to be used everywhere. If it is set for other tags, the specications
are used only for matches of the type described by the tag. For this to work best,
the group-name style must be set to an empty string.
Chapter 20: Completion System 213
In addition to setting styles for specic tags, it is also possible to use group names
specied explicitly by the group-name tag together with the (group) syntax
allowed by the ZLS_COLORS and ZLS_COLOURS parameters and simply using the
default tag.
It is possible to use any color specications already set up for the GNU version of
the ls command:
zstyle :completion:*:default list-colors ${(s.:.)LS_COLORS}
The default colors are the same as for the GNU ls command and can be obtained
by setting the style to an empty string (i.e. ).
list-dirs-first
This is used by le completion. If set, directories to be completed are listed sep-
arately from and before completion for other les, regardless of tag ordering. In
addition, the tag other-files is used in place of all-files for the remaining les,
to indicate that no directories are presented with that tag.
list-grouped
If this style is true (the default), the completion system will try to make certain
completion listings more compact by grouping matches. For example, options for
commands that have the same description (shown when the verbose style is set to
true) will appear as a single entry. However, menu selection can be used to cycle
through all the matches.
list-packed
This is tested for each tag valid in the current context as well as the default tag. If
it is set to true, the corresponding matches appear in listings as if the LIST_PACKED
option were set. If it is set to false, they are listed normally.
list-prompt
If this style is set for the default tag, completion lists that dont t on the screen
can be scrolled (see Section 22.7 [The zsh/complist Module], page 266). The value,
if not the empty string, will be displayed after every screenful and the shell will
prompt for a key press; if the style is set to the empty string, a default prompt will
be used.
The value may contain the escape sequences: %l or %L, which will be replaced by
the number of the last line displayed and the total number of lines; %m or %M, the
number of the last match shown and the total number of matches; and %p and %P,
Top when at the beginning of the list, Bottom when at the end and the position
shown as a percentage of the total length otherwise. In each case the form with
the uppercase letter will be replaced by a string of xed width, padded to the right
with spaces, while the lowercase form will be replaced by a variable width string.
As in other prompt strings, the escape sequences %S, %s, %B, %b, %U, %u for
entering and leaving the display modes standout, bold and underline, and %F, %f,
%K, %k for changing the foreground background colour, are also available, as is
the form %{...%} for enclosing escape sequences which display with zero (or, with
a numeric argument, some other) width.
After deleting this prompt the variable LISTPROMPT should be unset for the removal
to take eect.
list-rows-first
This style is tested in the same way as the list-packed style and determines
whether matches are to be listed in a rows-rst fashion as if the LIST_ROWS_FIRST
option were set.
Chapter 20: Completion System 214
list-suffixes
This style is used by the function that completes lenames. If it is true, and com-
pletion is attempted on a string containing multiple partially typed pathname com-
ponents, all ambiguous components will be shown. Otherwise, completion stops at
the rst ambiguous component.
list-separator
The value of this style is used in completion listing to separate the string to complete
from a description when possible (e.g. when completing options). It defaults to --
(two hyphens).
local This is for use with functions that complete URLs for which the corresponding les
are available directly from the le system. Its value should consist of three strings: a
hostname, the path to the default web pages for the server, and the directory name
used by a user placing web pages within their home area.
For example:
zstyle :completion:* local toast \
/var/http/public/toast public_html
Completion after http://toast/stuff/ will look for les in the
directory /var/http/public/toast/stuff, while completion after
http://toast/~yousir/ will look for les in the directory ~yousir/public_html.
mail-directory
If set, zsh will assume that mailbox les can be found in the directory specied. It
defaults to ~/Mail.
match-original
This is used by the _match completer. If it is set to only, _match will try to generate
matches without inserting a * at the cursor position. If set to any other non-empty
value, it will rst try to generate matches without inserting the * and if that yields
no matches, it will try again with the * inserted. If it is unset or set to the empty
string, matching will only be performed with the * inserted.
matcher This style is tested separately for each tag valid in the current context. Its value
is tried before any match specications given by the matcher-list style. It should
be in the form described in Section 19.5 [Completion Matching Control], page 187.
For examples of this, see the description of the tag-order style.
matcher-list
This style can be set to a list of match specications that are to be applied every-
where. Match specications are described in Section 19.5 [Completion Matching
Control], page 187. The completion system will try them one after another for each
completer selected. For example, to try rst simple completion and, if that generates
no matches, case-insensitive completion:
zstyle :completion:* matcher-list m:{a-zA-Z}={A-Za-z}
By default each specication replaces the previous one; however, if a specication
is prexed with +, it is added to the existing list. Hence it is possible to create
increasingly general specications without repetition:
zstyle :completion:* matcher-list +m:{a-z}={A-Z} +m:{A-Z}={a-
z}
It is possible to create match specications valid for particular completers by using
the third eld of the context. This applies only to completers that override the global
matcher-list, which as of this writing includes only _prefix and _ignored. For
Chapter 20: Completion System 215
example, to use the completers _complete and _prefix but allow case-insensitive
completion only with _complete:
zstyle :completion:* completer _complete _prefix
zstyle :completion:*:complete:* matcher-list \
m:{a-zA-Z}={A-Za-z}
User-dened names, as explained for the completer style, are available. This makes
it possible to try the same completer more than once with dierent match specica-
tions each time. For example, to try normal completion without a match specica-
tion, then normal completion with case-insensitive matching, then correction, and
nally partial-word completion:
zstyle :completion:* completer _complete _correct _complete:foo
zstyle :completion:*:complete:* matcher-list \
m:{a-zA-Z}={A-Za-z}
zstyle :completion:*:foo:* matcher-list \
m:{a-zA-Z}={A-Za-z} r:|[-_./]=* r:|=*
If the style is unset in any context no match specication is applied. Note also
that some completers such as _correct and _approximate do not use the match
specications at all, though these completers will only ever be called once even if
the matcher-list contains more than one element.
Where multiple specications are useful, note that the entire completion is done for
each element of matcher-list, which can quickly reduce the shells performance.
As a rough rule of thumb, one to three strings will give acceptable performance. On
the other hand, putting multiple space-separated values into the same string does
not have an appreciable impact on performance.
If there is no current matcher or it is empty, and the option NO_CASE_GLOB is in
eect, the matching for les is performed case-insensitively in any case. However,
any matcher must explicitly specify case-insensitive matching if that is required.
max-errors
This is used by the _approximate and _correct completer functions to determine
the maximum number of errors to allow. The completer will try to generate com-
pletions by rst allowing one error, then two errors, and so on, until either a match
or matches were found or the maximum number of errors given by this style has
been reached.
If the value for this style contains the string numeric, the completer function will
take any numeric argument as the maximum number of errors allowed. For example,
with
zstyle :completion:*:approximate::: max-errors 2 numeric
two errors are allowed if no numeric argument is given, but with a numeric argument
of six (as in ESC-6 TAB), up to six errors are accepted. Hence with a value of 0
numeric, no correcting completion will be attempted unless a numeric argument is
given.
If the value contains the string not-numeric, the completer will not try to generate
corrected completions when given a numeric argument, so in this case the number
given should be greater than zero. For example, 2 not-numeric species that
correcting completion with two errors will usually be performed, but if a numeric
argument is given, correcting completion will not be performed.
The default value for this style is 2 numeric.
Chapter 20: Completion System 216
max-matches-width
This style is used to determine the trade o between the width of the display used
for matches and the width used for their descriptions when the verbose style is in
eect. The value gives the number of display columns to reserve for the matches.
The default is half the width of the screen.
This has the most impact when several matches have the same description and so
will be grouped together. Increasing the style will allow more matches to be grouped
together; decreasing it will allow more of the description to be visible.
menu If this is true in the context of any of the tags dened for the current completion
menu completion will be used. The value for a specic tag will take precedence over
that for the default tag.
If none of the values found in this way is true but at least one is set to auto, the
shell behaves as if the AUTO_MENU option is set.
If one of the values is explicitly set to false, menu completion will be explicitly turned
o, overriding the MENU_COMPLETE option and other settings.
In the form yes=num, where yes may be any of the true values (yes, true,
on and 1), menu completion will be turned on if there are at least num matches.
In the form yes=long, menu completion will be turned on if the list does not t
on the screen. This does not activate menu completion if the widget normally only
lists completions, but menu completion can be activated in that case with the value
yes=long-list (Typically, the value select=long-list described later is more
useful as it provides control over scrolling.)
Similarly, with any of the false values (as in no=10), menu completion will not be
used if there are num or more matches.
The value of this widget also controls menu selection, as implemented by the
zsh/complist module. The following values may appear either alongside or in-
stead of the values above.
If the value contains the string select, menu selection will be started uncondi-
tionally.
In the form select=num, menu selection will only be started if there are at least
num matches. If the values for more than one tag provide a number, the smallest
number is taken.
Menu selection can be turned o explicitly by dening a value containing the
stringno-select.
It is also possible to start menu selection only if the list of matches does not t on
the screen by using the value select=long. To start menu selection even if the
current widget only performs listing, use the value select=long-list.
To turn on menu completion or menu selection when a there are a certain number
of matches or the list of matches does not t on the screen, both of yes= and
select= may be given twice, once with a number and once with long or long-
list.
Finally, it is possible to activate two special modes of menu selection. The word
interactive in the value causes interactive mode to be entered immediately when
menu selection is started; see Section 22.7 [The zsh/complist Module], page 266 for
a description of interactive mode. Including the string search does the same for
incremental search mode. To select backward incremental search, include the string
search-backward.
muttrc If set, gives the location of the mutt conguration le. It defaults to ~/.muttrc.
Chapter 20: Completion System 217
numbers This is used with the jobs tag. If it is true, the shell will complete job numbers
instead of the shortest unambiguous prex of the job command text. If the value is a
number, job numbers will only be used if that many words from the job descriptions
are required to resolve ambiguities. For example, if the value is 1, strings will only
be used if all jobs dier in the rst word on their command lines.
old-list This is used by the _oldlist completer. If it is set to always, then standard
widgets which perform listing will retain the current list of matches, however they
were generated; this can be turned o explicitly with the value never, giving the
behaviour without the _oldlist completer. If the style is unset, or any other value,
then the existing list of completions is displayed if it is not already; otherwise, the
standard completion list is generated; this is the default behaviour of _oldlist.
However, if there is an old list and this style contains the name of the completer
function that generated the list, then the old list will be used even if it was generated
by a widget which does not do listing.
For example, suppose you type ^Xc to use the _correct_word widget, which gen-
erates a list of corrections for the word under the cursor. Usually, typing ^D would
generate a standard list of completions for the word on the command line, and show
that. With _oldlist, it will instead show the list of corrections already generated.
As another example consider the _match completer: with the insert-unambiguous
style set to true it inserts only a common prex string, if there is any. However, this
may remove parts of the original pattern, so that further completion could produce
more matches than on the rst attempt. By using the _oldlist completer and
setting this style to _match, the list of matches generated on the rst attempt will
be used again.
old-matches
This is used by the _all_matches completer to decide if an old list of matches
should be used if one exists. This is selected by one of the true values or by the
string only. If the value is only, _all_matches will only use an old list and
wont have any eect on the list of matches currently being generated.
If this style is set it is generally unwise to call the _all_matches completer un-
conditionally. One possible use is for either this style or the completer style to be
dened with the -e option to zstyle to make the style conditional.
old-menu This is used by the _oldlist completer. It controls how menu completion behaves
when a completion has already been inserted and the user types a standard comple-
tion key such as TAB. The default behaviour of _oldlist is that menu completion
always continues with the existing list of completions. If this style is set to false,
however, a new completion is started if the old list was generated by a dierent
completion command; this is the behaviour without the _oldlist completer.
For example, suppose you type ^Xc to generate a list of corrections, and menu
completion is started in one of the usual ways. Usually, or with this style set to
false, typing TAB at this point would start trying to complete the line as it now
appears. With _oldlist, it instead continues to cycle through the list of corrections.
original This is used by the _approximate and _correct completers to decide if the original
string should be added as a possible completion. Normally, this is done only if there
are at least two possible corrections, but if this style is set to true, it is always
added. Note that the style will be examined with the completer eld in the context
name set to correct-num or approximate-num, where num is the number of errors
that were accepted.
Chapter 20: Completion System 218
packageset
This style is used when completing arguments of the Debian dpkg program. It
contains an override for the default package set for a given context. For example,
zstyle :completion:*:complete:dpkg:option--status-1:* \
packageset avail
causes available packages, rather than only installed packages, to be completed for
dpkg --status.
path The function that completes color names uses this style with the colors tag. The
value should be the pathname of a le containing color names in the format of an
X11 rgb.txt le. If the style is not set but this le is found in one of various
standard locations it will be used as the default.
path-completion
This is used by lename completion. By default, lename completion examines
all components of a path to see if there are completions of that component. For
example, /u/b/z can be completed to /usr/bin/zsh. Explicitly setting this style
to false inhibits this behaviour for path components up to the / before the cursor;
this overrides the setting of accept-exact-dirs.
Even with the style set to false, it is still possible to complete multiple paths
by setting the option COMPLETE_IN_WORD and moving the cursor back to the rst
component in the path to be completed. For example, /u/b/z can be completed to
/usr/bin/zsh if the cursor is after the /u.
pine-directory
If set, species the directory containing PINE mailbox les. There is no default,
since recursively searching this directory is inconvenient for anyone who doesnt use
PINE.
ports A list of Internet service names (network ports) to complete. If this is not set,
service names are taken from the le /etc/services.
prefix-hidden
This is used for certain completions which share a common prex, for example
command options beginning with dashes. If it is true, the prex will not be shown
in the list of matches.
The default value for this style is false.
prefix-needed
This style is also relevant for matches with a common prex. If it is set to true
this common prex must be typed by the user to generate the matches.
The style is applicable to the options, signals, jobs, functions, and parameters
completion tags.
For command options, this means that the initial -, +, or -- must be typed
explicitly before option names will be completed.
For signals, an initial - is required before signal names will be completed.
For jobs, an initial % is required before job names will be completed.
For function and parameter names, an initial _ or . is required before function
or parameter names starting with those characters will be completed.
The default value for this style is false for function and parameter completions,
and true otherwise.
preserve-prefix
This style is used when completing path names. Its value should be a pattern
matching an initial prex of the word to complete that should be left unchanged
Chapter 20: Completion System 219
under all circumstances. For example, on some Unices an initial // (double slash)
has a special meaning; setting this style to the string // will preserve it. As
another example, setting this style to ?:/ under Cygwin would allow completion
after a:/... and so on.
range This is used by the _history completer and the _history_complete_word bindable
command to decide which words should be completed.
If it is a single number, only the last N words from the history will be completed.
If it is a range of the form max:slice, the last slice words will be completed; then
if that yields no matches, the slice words before those will be tried and so on. This
process stops either when at least one match was been found, or max words have
been tried.
The default is to complete all words from the history at once.
recursive-files
If this style is set, its value is an array of patterns to be tested against $PWD/: note
the trailing slash, which allows directories in the pattern to be delimited unambigu-
ously by including slashes on both sides. If an ordinary le completion fails and
the word on the command line does not yet have a directory part to its name, the
style is retrieved using the same tag as for the completion just attempted, then the
elements tested against $PWD/ in turn. If one matches, then the shell reattempts
completion by prepending the word on the command line with each directory in the
expansion of **/*(/) in turn. Typically the elements of the style will be set to
restrict the number of directories beneath the current one to a manageable number,
for example */.git/*.
For example,
zstyle :completion:* recursive-files */zsh/*
If the current directory is /home/pws/zsh/Src, then zle_trTAB can be completed
to Zle/zle_tricky.c.
regular This style is used by the _expand_alias completer and bindable command. If set to
true (the default), regular aliases will be expanded but only in command position.
If it is set to false, regular aliases will never be expanded. If it is set to always,
regular aliases will be expanded even if not in command position.
rehash If this is set when completing external commands, the internal list (hash) of com-
mands will be updated for each search by issuing the rehash command. There is a
speed penalty for this which is only likely to be noticeable when directories in the
path have slow le access.
remote-access
If set to false, certain commands will be prevented from making Internet con-
nections to retrieve remote information. This includes the completion for the CVS
command.
It is not always possible to know if connections are in fact to a remote site, so some
may be prevented unnecessarily.
remove-all-dups
The _history_complete_word bindable command and the _history completer use
this to decide if all duplicate matches should be removed, rather than just consecu-
tive duplicates.
select-prompt
If this is set for the default tag, its value will be displayed during menu selection
(see the menu style above) when the completion list does not t on the screen as a
Chapter 20: Completion System 220
whole. The same escapes as for the list-prompt style are understood, except that
the numbers refer to the match or line the mark is on. A default prompt is used
when the value is the empty string.
select-scroll
This style is tested for the default tag and determines how a completion list is
scrolled during a menu selection (see the menu style above) when the completion list
does not t on the screen as a whole. If the value is 0 (zero), the list is scrolled by
half-screenfuls; if it is a positive integer, the list is scrolled by the given number of
lines; if it is a negative number, the list is scrolled by a screenful minus the absolute
value of the given number of lines. The default is to scroll by single lines.
separate-sections
This style is used with the manuals tag when completing names of manual pages. If
it is true, entries for dierent sections are added separately using tag names of the
form manual.X, where X is the section number. When the group-name style is
also in eect, pages from dierent sections will appear separately. This style is also
used similarly with the words style when completing words for the dict command.
It allows words from dierent dictionary databases to be added separately. The
default for this style is false.
show-ambiguity
If the zsh/complist module is loaded, this style can be used to highlight the rst
ambiguous character in completion lists. The value is either a color indication such
as those supported by the list-colors style or, with a value of true, a default of
underlining is selected. The highlighting is only applied if the completion display
strings correspond to the actual matches.
show-completer
Tested whenever a new completer is tried. If it is true, the completion system
outputs a progress message in the listing area showing what completer is being
tried. The message will be overwritten by any output when completions are found
and is removed after completion is nished.
single-ignored
This is used by the _ignored completer when there is only one match. If its value
is show, the single match will be displayed but not inserted. If the value is menu,
then the single match and the original string are both added as matches and menu
completion is started, making it easy to select either of them.
sort Many completion widgets call _description at some point which decides whether
the matches are added sorted or unsorted (often indirectly via _wanted or
_requested). This style can be set explicitly to one of the usual true or false
values as an override. If it is not set for the context, the standard behaviour of the
calling widget is used.
The style is tested rst against the full context including the tag, and if that fails
to produce a value against the context without the tag.
If the calling widget explicitly requests unsorted matches, this is usually honoured.
However, the default (unsorted) behaviour of completion for the command history
may be overridden by setting the style to true.
In the _expand completer, if it is set to true, the expansions generated will always
be sorted. If it is set to menu, then the expansions are only sorted when they are
oered as single strings but not in the string containing all possible expansions.
Chapter 20: Completion System 221
special-dirs
Normally, the completion code will not produce the directory names . and .. as
possible completions. If this style is set to true, it will add both . and .. as
possible completions; if it is set to .., only .. will be added.
The following example sets special-dirs to .. when the current prex is empty,
is a single ., or consists only of a path beginning with ../. Otherwise the value
is false.
zstyle -e :completion:* special-dirs \
[[ $PREFIX = (../)#(|.|..) ]] && reply=(..)
squeeze-slashes
If set to true, sequences of slashes in lename paths (for example in foo//bar) will
be treated as a single slash. This is the usual behaviour of UNIX paths. However,
by default the le completion function behaves as if there were a * between the
slashes.
stop If set to true, the _history_complete_word bindable command will
stop once when reaching the beginning or end of the history. Invoking
_history_complete_word will then wrap around to the opposite end of the
history. If this style is set to false (the default), _history_complete_word will
loop immediately as in a menu completion.
strip-comments
If set to true, this style causes non-essential comment text to be removed from
completion matches. Currently it is only used when completing e-mail addresses
where it removes any display name from the addresses, cutting them down to plain
user@host form.
subst-globs-only
This is used by the _expand completer. If it is set to true, the expansion will only
be used if it resulted from globbing; hence, if expansions resulted from the use of the
substitute style described below, but these were not further changed by globbing,
the expansions will be rejected.
The default for this style is false.
substitute
This boolean style controls whether the _expand completer will rst try to expand
all substitutions in the string (such as $(...) and ${...}).
The default is true.
suffix This is used by the _expand completer if the word starts with a tilde or contains
a parameter expansion. If it is set to true, the word will only be expanded if it
doesnt have a sux, i.e. if it is something like ~foo or $foo rather than ~foo/
or $foo/bar, unless that sux itself contains characters eligible for expansion. The
default for this style is true.
tag-order
This provides a mechanism for sorting how the tags available in a particular context
will be used.
The values for the style are sets of space-separated lists of tags. The tags in each
value will be tried at the same time; if no match is found, the next value is used.
(See the file-patterns style for an exception to this behavior.)
For example:
zstyle :completion:*:complete:-command-:* tag-order \
Chapter 20: Completion System 222
commands functions
species that completion in command position rst oers external commands and
shell functions. Remaining tags will be tried if no completions are found.
In addition to tag names, each string in the value may take one of the following
forms:
- If any value consists of only a hyphen, then only the tags specied in
the other values are generated. Normally all tags not explicitly selected
are tried last if the specied tags fail to generate any matches. This
means that a single value consisting only of a single hyphen turns o
completion.
! tags... A string starting with an exclamation mark species names of tags that
are not to be used. The eect is the same as if all other possible tags
for the context had been listed.
tag:label ...
Here, tag is one of the standard tags and label is an arbitrary name.
Matches are generated as normal but the name label is used in contexts
instead of tag. This is not useful in words starting with !.
If the label starts with a hyphen, the tag is prepended to the label to
form the name used for lookup. This can be used to make the comple-
tion system try a certain tag more than once, supplying dierent style
settings for each attempt; see below for an example.
tag:label:description
As before, but description will replace the %d in the value of the
format style instead of the default description supplied by the comple-
tion function. Spaces in the description must be quoted with a back-
slash. A %d appearing in description is replaced with the description
given by the completion function.
In any of the forms above the tag may be a pattern or several patterns in the form
{pat1,pat2...}. In this case all matching tags will be used except for any given
explicitly in the same string.
One use of these features is to try one tag more than once, setting other styles
dierently on each attempt, but still to use all the other tags without having to
repeat them all. For example, to make completion of function names in command
position ignore all the completion functions starting with an underscore the rst
time completion is tried:
zstyle :completion:*:*:-command-:* tag-order \
functions:-non-comp * functions
zstyle :completion:*:functions-non-comp ignored-patterns _*
On the rst attempt, all tags will be oered but the functions tag will be replaced
by functions-non-comp. The ignored-patterns style is set for this tag to exclude
functions starting with an underscore. If there are no matches, the second value of
the tag-order style is used which completes functions using the default tag, this
time presumably including all function names.
The matches for one tag can be split into dierent groups. For example:
zstyle :completion:* tag-order \
options:-long:long\ options
options:-short:short\ options
options:-single-letter:single\ letter\ options
Chapter 20: Completion System 223
zstyle :completion:*:options-long ignored-patterns [-+](|-|[^-
]*)
zstyle :completion:*:options-short ignored-patterns --* [-+]?
zstyle :completion:*:options-single-letter ignored-patterns ???*
With the group-names style set, options beginning with --, options beginning with
a single - or + but containing multiple characters, and single-letter options will
be displayed in separate groups with dierent descriptions.
Another use of patterns is to try multiple match specications one after another.
The matcher-list style oers something similar, but it is tested very early in the
completion system and hence cant be set for single commands nor for more specic
contexts. Here is how to try normal completion without any match specication and,
if that generates no matches, try again with case-insensitive matching, restricting
the eect to arguments of the command foo:
zstyle :completion:*:*:foo:* tag-order * *:-case
zstyle :completion:*-case matcher m:{a-z}={A-Z}
First, all the tags oered when completing after foo are tried using the normal tag
name. If that generates no matches, the second value of tag-order is used, which
tries all tags again except that this time each has -case appended to its name for
lookup of styles. Hence this time the value for the matcher style from the second
call to zstyle in the example is used to make completion case-insensitive.
It is possible to use the -e option of the zstyle builtin command to specify condi-
tions for the use of particular tags. For example:
zstyle -e *:-command-:* tag-order
if [[ -n $PREFIX$SUFFIX ]]; then
reply=( )
else
reply=( - )
fi
Completion in command position will be attempted only if the string typed so far
is not empty. This is tested using the PREFIX special parameter; see Chapter 19
[Completion Widgets], page 176 for a description of parameters which are special
inside completion widgets. Setting reply to an empty array provides the default
behaviour of trying all tags at once; setting it to an array containing only a hyphen
disables the use of all tags and hence of all completions.
If no tag-order style has been dened for a context, the strings (|*-)argument-
* (|*-)option-* values and options plus all tags oered by the completion
function will be used to provide a sensible default behavior that causes arguments
(whether normal command arguments or arguments of options) to be completed
before option names for most commands.
urls This is used together with the urls tag by functions completing URLs.
If the value consists of more than one string, or if the only string does not name a
le or directory, the strings are used as the URLs to complete.
If the value contains only one string which is the name of a normal le the URLs are
taken from that le (where the URLs may be separated by white space or newlines).
Finally, if the only string in the value names a directory, the directory hierarchy
rooted at this directory gives the completions. The top level directory should be the
le access method, such as http, ftp, bookmark and so on. In many cases the
Chapter 20: Completion System 224
next level of directories will be a lename. The directory hierarchy can descend as
deep as necessary.
For example,
zstyle :completion:* urls ~/.urls
mkdir -p ~/.urls/ftp/ftp.zsh.org/pub
allows completion of all the components of the URL ftp://ftp.zsh.org/pub af-
ter suitable commands such as netscape or lynx. Note, however, that access
methods and les are completed separately, so if the hosts style is set hosts can be
completed without reference to the urls style.
See the description in the function _urls itself for more information (e.g. more
$^fpath/_urls(N)).
use-cache
If this is set, the completion caching layer is activated for any completions which
use it (via the _store_cache, _retrieve_cache, and _cache_invalid functions).
The directory containing the cache les can be changed with the cache-path style.
use-compctl
If this style is set to a string not equal to false, 0, no, and off, the completion
system may use any completion specications dened with the compctl builtin
command. If the style is unset, this is done only if the zsh/compctl module is
loaded. The string may also contain the substring first to use completions dened
with compctl -T, and the substring default to use the completion dened with
compctl -D.
Note that this is only intended to smooth the transition from compctl to the new
completion system and may disappear in the future.
Note also that the denitions from compctl will only be used if there is no specic
completion function for the command in question. For example, if there is a function
_foo to complete arguments to the command foo, compctl will never be invoked for
foo. However, the compctl version will be tried if foo only uses default completion.
use-ip By default, the function _hosts that completes host names strips IP addresses from
entries read from host databases such as NIS and ssh les. If this style is true, the
corresponding IP addresses can be completed as well. This style is not use in any
context where the hosts style is set; note also it must be set before the cache of
host names is generated (typically the rst completion attempt).
users This may be set to a list of usernames to be completed. If it is not set all usernames
will be completed. Note that if it is set only that list of users will be completed;
this is because on some systems querying all users can take a prohibitive amount of
time.
users-hosts
The values of this style should be of the form user@host or user:host. It is used for
commands that need pairs of user- and hostnames. These commands will complete
usernames from this style (only), and will restrict subsequent hostname completion
to hosts paired with that user in one of the values of the style.
It is possible to group values for sets of commands which allow a remote login,
such as rlogin and ssh, by using the my-accounts tag. Similarly, values for sets
of commands which usually refer to the accounts of other people, such as talk
and finger, can be grouped by using the other-accounts tag. More ambivalent
commands may use the accounts tag.
Chapter 20: Completion System 225
users-hosts-ports
Like users-hosts but used for commands like telnet and containing strings of the
form user@host:port.
verbose If set, as it is by default, the completion listing is more verbose. In particular many
commands show descriptions for options if this style is true.
word This is used by the _list completer, which prevents the insertion of completions
until a second completion attempt when the line has not changed. The normal way
of nding out if the line has changed is to compare its entire contents between the
two occasions. If this style is true, the comparison is instead performed only on
the current word. Hence if completion is performed on another word with the same
contents, completion will not be delayed.
20.4 Control Functions
The initialization script compinit redenes all the widgets which perform completion to call the
supplied widget function _main_complete. This function acts as a wrapper calling the so-called
completer functions that generate matches. If _main_complete is called with arguments, these
are taken as the names of completer functions to be called in the order given. If no arguments
are given, the set of functions to try is taken from the completer style. For example, to use
normal completion and correction if that doesnt generate any matches:
zstyle :completion:* completer _complete _correct
after calling compinit. The default value for this style is _complete _ignored, i.e. normally
only ordinary completion is tried, rst with the eect of the ignored-patterns style and then
without it. The _main_complete function uses the return status of the completer functions to
decide if other completers should be called. If the return status is zero, no other completers are
tried and the _main_complete function returns.
If the rst argument to _main_complete is a single hyphen, the arguments will not be taken as
names of completers. Instead, the second argument gives a name to use in the completer eld of
the context and the other arguments give a command name and arguments to call to generate
the matches.
The following completer functions are contained in the distribution, although users may write
their own. Note that in contexts the leading underscore is stripped, for example basic completion
is performed in the context :completion::complete:....
_all_matches
This completer can be used to add a string consisting of all other matches. As it
inuences later completers it must appear as the rst completer in the list. The list
of all matches is aected by the avoid-completer and old-matches styles described
above.
It may be useful to use the _generic function described below to bind _all_matches
to its own keystroke, for example:
zle -C all-matches complete-word _generic
bindkey ^Xa all-matches
zstyle :completion:all-matches:* old-matches only
zstyle :completion:all-matches:::: completer _all_matches
Note that this does not generate completions by itself: rst use any of the standard
ways of generating a list of completions, then use ^Xa to show all matches. It is
Chapter 20: Completion System 226
possible instead to add a standard completer to the list and request that the list of
all matches should be directly inserted:
zstyle :completion:all-matches:::: completer _all_matches _complete
zstyle :completion:all-matches:* insert true
In this case the old-matches style should not be set.
_approximate
This is similar to the basic _complete completer but allows the completions to
undergo corrections. The maximum number of errors can be specied by the max-
errors style; see the description of approximate matching in Section 14.8 [Filename
Generation], page 59 for how errors are counted. Normally this completer will only
be tried after the normal _complete completer:
zstyle :completion:* completer _complete _approximate
This will give correcting completion if and only if normal completion yields no
possible completions. When corrected completions are found, the completer will
normally start menu completion allowing you to cycle through these strings.
This completer uses the tags corrections and original when generating the possi-
ble corrections and the original string. The format style for the former may contain
the additional sequences %e and %o which will be replaced by the number of errors
accepted to generate the corrections and the original string, respectively.
The completer progressively increases the number of errors allowed up to the limit by
the max-errors style, hence if a completion is found with one error, no completions
with two errors will be shown, and so on. It modies the completer name in the
context to indicate the number of errors being tried: on the rst try the completer
eld contains approximate-1, on the second try approximate-2, and so on.
When _approximate is called from another function, the number of errors to accept
may be passed with the -a option. The argument is in the same format as the max-
errors style, all in one string.
Note that this completer (and the _correct completer mentioned below) can be
quite expensive to call, especially when a large number of errors are allowed. One
way to avoid this is to set up the completer style using the -e option to zstyle so
that some completers are only used when completion is attempted a second time on
the same string, e.g.:
zstyle -e :completion:* completer
if [[ $_last_try != "$HISTNO$BUFFER$CURSOR" ]]; then
_last_try="$HISTNO$BUFFER$CURSOR"
reply=(_complete _match _prefix)
else
reply=(_ignored _correct _approximate)
fi
This uses the HISTNO parameter and the BUFFER and CURSOR special parameters
that are available inside zle and completion widgets to nd out if the command
line hasnt changed since the last time completion was tried. Only then are the
_ignored, _correct and _approximate completers called.
_complete
This completer generates all possible completions in a context-sensitive manner, i.e.
using the settings dened with the compdef function explained above and the current
settings of all special parameters. This gives the normal completion behaviour.
To complete arguments of commands, _complete uses the utility function _normal,
which is in turn responsible for nding the particular function; it is described be-
Chapter 20: Completion System 227
low. Various contexts of the form -context- are handled specically. These are all
mentioned above as possible arguments to the #compdef tag.
Before trying to nd a function for a specic context, _complete checks if the
parameter compcontext is set. Setting compcontext allows the usual completion
dispatching to be overridden which is useful in places such as a function that uses
vared for input. If it is set to an array, the elements are taken to be the possible
matches which will be completed using the tag values and the description value.
If it is set to an associative array, the keys are used as the possible completions and
the values (if non-empty) are used as descriptions for the matches. If compcontext
is set to a string containing colons, it should be of the form tag:descr:action.
In this case the tag and descr give the tag and description to use and the action
indicates what should be completed in one of the forms accepted by the _arguments
utility function described below.
Finally, if compcontext is set to a string without colons, the value is taken as the
name of the context to use and the function dened for that context will be called.
For this purpose, there is a special context named -command-line- that completes
whole command lines (commands and their arguments). This is not used by the
completion system itself but is nonetheless handled when explicitly called.
_correct Generate corrections, but not completions, for the current word; this is similar to
_approximate but will not allow any number of extra characters at the cursor as that
completer does. The eect is similar to spell-checking. It is based on _approximate,
but the completer eld in the context name is correct.
For example, with:
zstyle :completion::::: completer _complete _correct _approximate
zstyle :completion:*:correct::: max-errors 2 not-numeric
zstyle :completion:*:approximate::: max-errors 3 numeric
correction will accept up to two errors. If a numeric argument is given, correction will
not be performed, but correcting completion will be, and will accept as many errors
as given by the numeric argument. Without a numeric argument, rst correction
and then correcting completion will be tried, with the rst one accepting two errors
and the second one accepting three errors.
When _correct is called as a function, the number of errors to accept may be given
following the -a option. The argument is in the same form a values to the accept
style, all in one string.
This completer function is intended to be used without the _approximate completer
or, as in the example, just before it. Using it after the _approximate completer is
useless since _approximate will at least generate the corrected strings generated by
the _correct completer and probably more.
_expand This completer function does not really perform completion, but instead checks if the
word on the command line is eligible for expansion and, if it is, gives detailed control
over how this expansion is done. For this to happen, the completion system needs
to be invoked with complete-word, not expand-or-complete (the default binding
for TAB), as otherwise the string will be expanded by the shells internal mechanism
before the completion system is started. Note also this completer should be called
before the _complete completer function.
The tags used when generating expansions are all-expansions for the string con-
taining all possible expansions, expansions when adding the possible expansions as
single matches and original when adding the original string from the line. The
order in which these strings are generated, if at all, can be controlled by the group-
order and tag-order styles, as usual.
Chapter 20: Completion System 228
The format string for all-expansions and for expansions may contain the se-
quence %o which will be replaced by the original string from the line.
The kind of expansion to be tried is controlled by the substitute, glob and subst-
globs-only styles.
It is also possible to call _expand as a function, in which case the dierent modes
may be selected with options: -s for substitute, -g for glob and -o for subst-
globs-only.
_expand_alias
If the word the cursor is on is an alias, it is expanded and no other completers are
called. The types of aliases which are to be expanded can be controlled with the
styles regular, global and disabled.
This function is also a bindable command, see Section 20.5 [Bindable Commands],
page 230.
_extensions
If the cursor follows the string *., lename extensions are completed. The ex-
tensions are taken from les in current directory or a directory specied at the
beginning of the current word. For exact matches, completion continues to allow
other completers such as _expand to expand the pattern. The standard add-space
and prefix-hidden styles are observed.
_history Complete words from the shells command history. This completer can be controlled
by the remove-all-dups, and sort styles as for the _history_complete_word bind-
able command, see Section 20.5 [Bindable Commands], page 230 and Section 20.3
[Completion System Conguration], page 197.
_ignored The ignored-patterns style can be set to a list of patterns which are compared
against possible completions; matching ones are removed. With this completer
those matches can be reinstated, as if no ignored-patterns style were set. The
completer actually generates its own list of matches; which completers are invoked
is determined in the same way as for the _prefix completer. The single-ignored
style is also available as described above.
_list This completer allows the insertion of matches to be delayed until completion is
attempted a second time without the word on the line being changed. On the rst
attempt, only the list of matches will be shown. It is aected by the styles condition
and word, see Section 20.3 [Completion System Conguration], page 197.
_match This completer is intended to be used after the _complete completer. It behaves
similarly but the string on the command line may be a pattern to match against
trial completions. This gives the eect of the GLOB_COMPLETE option.
Normally completion will be performed by taking the pattern from the line, in-
serting a * at the cursor position and comparing the resulting pattern with the
possible completions generated. This can be modied with the match-original
style described above.
The generated matches will be oered in a menu completion unless the insert-
unambiguous style is set to true; see the description above for other options for
this style.
Note that matcher specications dened globally or used by the completion functions
(the styles matcher-list and matcher) will not be used.
_menu This completer was written as simple example function to show how menu comple-
tion can be enabled in shell code. However, it has the notable eect of disabling
Chapter 20: Completion System 229
menu selection which can be useful with _generic based widgets. It should be used
as the rst completer in the list. Note that this is independent of the setting of the
MENU_COMPLETE option and does not work with the other menu completion widgets
such as reverse-menu-complete, or accept-and-menu-complete.
_oldlist This completer controls how the standard completion widgets behave when there
is an existing list of completions which may have been generated by a special com-
pletion (i.e. a separately-bound completion command). It allows the ordinary com-
pletion keys to continue to use the list of completions thus generated, instead of
producing a new list of ordinary contextual completions. It should appear in the
list of completers before any of the widgets which generate matches. It uses two
styles: old-list and old-menu, see Section 20.3 [Completion System Congura-
tion], page 197.
_prefix This completer can be used to try completion with the sux (everything after the
cursor) ignored. In other words, the sux will not be considered to be part of
the word to complete. The eect is similar to the expand-or-complete-prefix
command.
The completer style is used to decide which other completers are to be called to
generate matches. If this style is unset, the list of completers set for the current
context is used except, of course, the _prefix completer itself. Furthermore, if
this completer appears more than once in the list of completers only those completers
not already tried by the last invocation of _prefix will be called.
For example, consider this global completer style:
zstyle :completion:* completer \
_complete _prefix _correct _prefix:foo
Here, the _prefix completer tries normal completion but ignoring the sux. If that
doesnt generate any matches, and neither does the call to the _correct completer
after it, _prefix will be called a second time and, now only trying correction with
the sux ignored. On the second invocation the completer part of the context
appears as foo.
To use _prefix as the last resort and try only normal completion when it is invoked:
zstyle :completion:* completer _complete ... _prefix
zstyle :completion::prefix:* completer _complete
The add-space style is also respected. If it is set to true then _prefix will insert
a space between the matches generated (if any) and the sux.
Note that this completer is only useful if the COMPLETE_IN_WORD option is set; other-
wise, the cursor will be moved to the end of the current word before the completion
code is called and hence there will be no sux.
_user_expand
This completer behaves similarly to the _expand completer but instead performs
expansions dened by users. The styles add-space and sort styles specic to the
_expand completer are usable with _user_expand in addition to other styles handled
more generally by the completion system. The tag all-expansions is also available.
The expansion depends on the array style user-expand being dened for the current
context; remember that the context for completers is less specic than that for
contextual completion as the full context has not yet been determined. Elements of
the array may have one of the following forms:
$hash
hash is the name of an associative array. Note this is not a full parameter
expression, merely a $, suitably quoted to prevent immediate expansion,
Chapter 20: Completion System 230
followed by the name of an associative array. If the trial expansion word
matches a key in hash, the resulting expansion is the corresponding
value.
func
func is the name of a shell function whose name must begin with _ but
is not otherwise special to the completion system. The function is called
with the trial word as an argument. If the word is to be expanded, the
function should set the array reply to a list of expansions. Optionally,
it can set REPLY to a word that will be used as a description for the set
of expansions. The return status of the function is irrelevant.
20.5 Bindable Commands
In addition to the context-dependent completions provided, which are expected to work in an
intuitively obvious way, there are a few widgets implementing special behaviour which can be
bound separately to keys. The following is a list of these and their default bindings.
_bash_completions
This function is used by two widgets, _bash_complete-word and _bash_list-
choices. It exists to provide compatibility with completion bindings in bash. The
last character of the binding determines what is completed: !, command names;
$, environment variables; @, host names; /, le names; ~ user names. In bash,
the binding preceded by \e gives completion, and preceded by ^X lists options.
As some of these bindings clash with standard zsh bindings, only \e~ and ^X~ are
bound by default. To add the rest, the following should be added to .zshrc after
compinit has been run:
for key in ! $ @ / ~; do
bindkey "\e$key" _bash_complete-word
bindkey "^X$key" _bash_list-choices
done
This includes the bindings for ~ in case they were already bound to something else;
the completion code does not override user bindings.
_correct_filename (^XC)
Correct the lename path at the cursor position. Allows up to six errors in the name.
Can also be called with an argument to correct a lename path, independently of
zle; the correction is printed on standard output.
_correct_word (^Xc)
Performs correction of the current argument using the usual contextual completions
as possible choices. This stores the string correct-word in the function eld of
the context name and then calls the _correct completer.
_expand_alias (^Xa)
This function can be used as a completer and as a bindable command. It expands
the word the cursor is on if it is an alias. The types of alias expanded can be
controlled with the styles regular, global and disabled.
When used as a bindable command there is one additional feature that can be
selected by setting the complete style to true. In this case, if the word is not the
name of an alias, _expand_alias tries to complete the word to a full alias name
without expanding it. It leaves the cursor directly after the completed word so that
invoking _expand_alias once more will expand the now-complete alias name.
Chapter 20: Completion System 231
_expand_word (^Xe)
Performs expansion on the current word: equivalent to the standard expand-word
command, but using the _expand completer. Before calling it, the function eld of
the context is set to expand-word.
_generic This function is not dened as a widget and not bound by default. However, it can
be used to dene a widget and will then store the name of the widget in the function
eld of the context and call the completion system. This allows custom completion
widgets with their own set of style settings to be dened easily. For example, to
dene a widget that performs normal completion and starts menu selection:
zle -C foo complete-word _generic
bindkey ... foo
zstyle :completion:foo:* menu yes select=1
Note in particular that the completer style may be set for the context in order
to change the set of functions used to generate possible matches. If _generic is
called with arguments, those are passed through to _main_complete as the list of
completers in place of those dened by the completer style.
_history_complete_word (\e/)
Complete words from the shells command history. This uses the list, remove-
all-dups, sort, and stop styles.
_most_recent_file (^Xm)
Complete the name of the most recently modied le matching the pattern on the
command line (which may be blank). If given a numeric argument N, complete the
Nth most recently modied le. Note the completion, if any, is always unique.
_next_tags (^Xn)
This command alters the set of matches used to that for the next tag, or set of tags,
either as given by the tag-order style or as set by default; these matches would
otherwise not be available. Successive invocations of the command cycle through
all possible sets of tags.
_read_comp (^X^R)
Prompt the user for a string, and use that to perform completion on the current
word. There are two possibilities for the string. First, it can be a set of words begin-
ning _, for example _files -/, in which case the function with any arguments
will be called to generate the completions. Unambiguous parts of the function name
will be completed automatically (normal completion is not available at this point)
until a space is typed.
Second, any other string will be passed as a set of arguments to compadd and should
hence be an expression specifying what should be completed.
A very restricted set of editing commands is available when reading the string: DEL
and ^H delete the last character; ^U deletes the line, and ^C and ^G abort the
function, while RET accepts the completion. Note the string is used verbatim as
a command line, so arguments must be quoted in accordance with standard shell
rules.
Once a string has been read, the next call to _read_comp will use the existing string
instead of reading a new one. To force a new string to be read, call _read_comp
with a numeric argument.
_complete_debug (^X?)
This widget performs ordinary completion, but captures in a temporary le a trace
of the shell commands executed by the completion system. Each completion attempt
Chapter 20: Completion System 232
gets its own le. A command to view each of these les is pushed onto the editor
buer stack.
_complete_help (^Xh)
This widget displays information about the context names, the tags, and the com-
pletion functions used when completing at the current cursor position. If given a
numeric argument other than 1 (as in ESC-2 ^Xh), then the styles used and the
contexts for which they are used will be shown, too.
Note that the information about styles may be incomplete; it depends on the infor-
mation available from the completion functions called, which in turn is determined
by the users own styles and other settings.
_complete_help_generic
Unlike other commands listed here, this must be created as a normal ZLE widget
rather than a completion widget (i.e. with zle -N). It is used for generating help
with a widget bound to the _generic widget that is described above.
If this widget is created using the name of the function, as it is by default, then
when executed it will read a key sequence. This is expected to be bound to a
call to a completion function that uses the _generic widget. That widget will be
executed, and information provided in the same format that the _complete_help
widget displays for contextual completion.
If the widgets name contains debug, for example if it is created as zle -N _com-
plete_debug_generic _complete_help_generic, it will read and execute the
keystring for a generic widget as before, but then generate debugging information
as done by _complete_debug for contextual completion.
If the widgets name contains noread, it will not read a keystring but instead arrange
that the next use of a generic widget run in the same shell will have the eect as
described above.
The widget works by setting the shell parameter ZSH_TRACE_GENERIC_WIDGET which
is read by _generic. Unsetting the parameter cancels any pending eect of the
noread form.
For example, after executing the following:
zle -N _complete_debug_generic _complete_help_generic
bindkey ^x: _complete_debug_generic
typing C-x : followed by the key sequence for a generic widget will cause trace
output for that widget to be saved to a le.
_complete_tag (^Xt)
This widget completes symbol tags created by the etags or ctags programmes (note
there is no connection with the completion systems tags) stored in a le TAGS, in
the format used by etags, or tags, in the format created by ctags. It will look
back up the path hierarchy for the rst occurrence of either le; if both exist, the
le TAGS is preferred. You can specify the full path to a TAGS or tags le by setting
the parameter $TAGSFILE or $tagsfile respectively. The corresponding completion
tags used are etags and vtags, after emacs and vi respectively.
20.6 Utility Functions
Descriptions follow for utility functions that may be useful when writing completion functions.
If functions are installed in subdirectories, most of these reside in the Base subdirectory. Like
the example functions for commands in the distribution, the utility functions generating matches
Chapter 20: Completion System 233
all follow the convention of returning status zero if they generated completions and non-zero if
no matching completions could be added.
Two more features are oered by the _main_complete function. The arrays compprefuncs and
comppostfuncs may contain names of functions that are to be called immediately before or
after completion has been tried. A function will only be called once unless it explicitly reinserts
itself into the array.
_all_labels [ -x ] [ -12VJ ] tag name descr [ command args ... ]
This is a convenient interface to the _next_label function below, implementing
the loop shown in the _next_label example. The command and its arguments
are called to generate the matches. The options stored in the parameter name will
automatically be inserted into the args passed to the command. Normally, they are
put directly after the command, but if one of the args is a single hyphen, they are
inserted directly before that. If the hyphen is the last argument, it will be removed
from the argument list before the command is called. This allows _all_labels to
be used in almost all cases where the matches can be generated by a single call to
the compadd builtin command or by a call to one of the utility functions.
For example:
local expl
...
if _requested foo; then
...
_all_labels foo expl ... compadd ... - $matches
fi
Will complete the strings from the matches parameter, using compadd with addi-
tional options which will take precedence over those generated by _all_labels.
_alternative [ -O name ] [ -C name ] spec ...
This function is useful in simple cases where multiple tags are available. Essentially
it implements a loop like the one described for the _tags function below.
The tags to use and the action to perform if a tag is requested are described using
the specs which are of the form: tag:descr:action. The tags are oered using
_tags and if the tag is requested, the action is executed with the given description
descr. The actions are those accepted by the _arguments function (described below),
excluding the ->state and =... forms.
For example, the action may be a simple function call:
_alternative \
users:user:_users \
hosts:host:_hosts
oers usernames and hostnames as possible matches, generated by the _users and
_hosts functions respectively.
Like _arguments, this function uses _all_labels to execute the actions, which will
loop over all sets of tags. Special handling is only required if there is an additional
valid tag, for example inside a function called from _alternative.
The option -O name is used in the same way as by the _arguments function.
In other words, the elements of the name array will be passed to compadd when
executing an action.
Like _tags this function supports the -C option to give a dierent name for the
argument context eld.
Chapter 20: Completion System 234
_arguments [ -nswWCRS ] [ -A pat ] [ -O name ] [ -M matchspec ] [ : ] spec...
_arguments [ opts... ] -- [ -i pats ] [ -s pair ] [ helpspec... ]
This function can be used to give a complete specication for completion for a
command whose arguments follow standard UNIX option and argument conventions.
Options to _arguments itself must be in separate words, i.e. -s -w, not -sw.
When calling _arguments, all specs that describe options of the analyzed command
line must precede all specs that describe non-option (aka "normal") arguments of
the analyzed line. To avoid ambiguity, all options to _arguments itself may be
separated from the spec forms by a single colon.
The -s -w -W -A and -S options describe how parsing of the command line should
proceed, and are discussed in context below. The -- form is used to intuit spec
forms from the help output of the command being analyzed, and is described in
detail below. The opts for the -- form are otherwise the same options as the rst
form. Note that -s following -- has a distinct meaning from -s preceding --,
and both may appear.
With the option -n, _arguments sets the parameter NORMARG to the position of
the rst normal argument in the $words array, i.e. the position after the end of
the options. If that argument has not been reached, NORMARG is set to -1. The
caller should declare integer NORMARG if the -n option is passed; otherwise the
parameter is not used.
The option -M matchspec sets a match specication to use to completion option
names and values. The default matchspec is:
r:|[_-]=* r:|=*
This allows partial word completion after _ and -, for example -f-b can be
completed to -foo-bar.
Each of the following forms is a spec describing individual sets of options or argu-
ments on the command line being analyzed.
n:message:action
n::message:action
This describes the nth normal argument. The message will be printed
above the matches generated and the action indicates what can be com-
pleted in this position (see below). If there are two colons before the
message the argument is optional. If the message contains only white
space, nothing will be printed above the matches unless the action adds
an explanation string itself.
:message:action
::message:action
Similar, but describes the next argument, whatever number that hap-
pens to be. If all arguments are specied in this form in the correct
order the numbers are unnecessary.
*:message:action
*::message:action
*:::message:action
This describes how arguments (usually non-option arguments, those not
beginning with - or +) are to be completed when neither of the rst two
forms was provided. Any number of arguments can be completed in
this fashion.
With two colons before the message, the words special array and the
CURRENT special parameter are modied to refer only to the normal ar-
Chapter 20: Completion System 235
guments when the action is executed or evaluated. With three colons
before the message they are modied to refer only to the normal argu-
ments covered by this description.
optspec
optspec:... This describes an option. The colon indicates handling for one or more
arguments to the option; if it is not present, the option is assumed to
take no arguments.
By default, options are multi-character name, one -word per option.
With -s, options may be single characters, with more than one op-
tion per word, although words starting with two hyphens, such as --
prefix, are still considered complete option names. This is suitable for
standard GNU options.
The combination of -s with -w allows single-letter options to be com-
bined in a single word even if one or more of the options take arguments.
For example, if -x takes an argument, with no -s -xy is considered as
a single (unhandled) option; with -s -xy is an option with the argument
y; with both -s and -w, -xy may be the option -x and the option -y
with arguments still to come.
The option -W takes this a stage further: it is possible to complete
single-letter options even after an argument that occurs in the same
word. However, it depends on the action performed whether options
will really be completed at this point. For more control, use a utility
function like _guard as part of the action.
The following forms are available for the initial optspec, whether or not
the option has arguments.
*optspec Here optspec is one of the remaining forms below. This
indicates the following optspec may be repeated. Other-
wise if the corresponding option is already present on the
command line to the left of the cursor it will not be oered
again.
-optname
+optname In the simplest form the optspec is just the option name be-
ginning with a minus or a plus sign, such as -foo. The rst
argument for the option (if any) must follow as a separate
word directly after the option.
Either of -+optname and +-optname can be used to spec-
ify that -optname and +optname are both valid.
In all the remaining forms, the leading - may be replaced
by or paired with + in this way.
-optname-
The rst argument of the option must come directly after
the option name in the same word. For example, -foo-:...
species that the completed option and argument will look
like -fooarg.
-optname+
The rst argument may appear immediately after optname
in the same word, or may appear as a separate word after
the option. For example, -foo+:... species that the com-
Chapter 20: Completion System 236
pleted option and argument will look like either -fooarg
or -foo arg.
-optname=
The argument may appear as the next word, or in same
word as the option name provided that it is separated from
it by an equals sign, for example -foo=arg or -foo arg.
-optname=-
The argument to the option must appear after an equals
sign in the same word, and may not be given in the next
argument.
optspec[explanation]
An explanation string may be appended to any of the pre-
ceding forms of optspec by enclosing it in brackets, as in
-q[query operation].
The verbose style is used to decide whether the explanation
strings are displayed with the option in a completion listing.
If no bracketed explanation string is given but the auto-
description style is set and only one argument is described
for this optspec, the value of the style is displayed, with
any appearance of the sequence %d in it replaced by the
message of the rst optarg that follows the optspec; see
below.
It is possible for options with a literal + or = to appear, but that
character must be quoted, for example -\+.
The options -S and -A are available to simplify the specications for
commands with standard option parsing. With -S, no option will be
completed after a -- appearing on its own on the line; this argument
will otherwise be ignored; hence in the line
foobar -x -- -y
the -x is considered an option but the -y is considered an argument,
while the -- is considered to be neither.
With -A, no options will be completed after the rst non-option ar-
gument on the line. The -A must be followed by a pattern matching
all strings which are not to be taken as arguments. For example, to
make _arguments stop completing options after the rst normal argu-
ment, but ignoring all strings starting with a hyphen even if they are
not described by one of the optspecs, the form is -A "-*".
Each optarg following an optspec must take one of the following forms:
:message:action
::message:action
An argument to the option; message and action are treated
as for ordinary arguments. In the rst form, the argument
is mandatory, and in the second form it is optional.
This group may be repeated for options which
take multiple arguments. In other words,
:message1:action1:message2:action2 species
that the option takes two arguments.
Chapter 20: Completion System 237
:*pattern:message:action
:*pattern::message:action
:*pattern:::message:action
This describes multiple arguments. Only the last optarg for
an option taking multiple arguments may be given in this
form. If the pattern is empty (i.e., :*:), all the remaining
words on the line are to be completed as described by the
action; otherwise, all the words up to and including a word
matching the pattern are to be completed using the action.
Multiple colons are treated as for the *:... forms for or-
dinary arguments: when the message is preceded by two
colons, the words special array and the CURRENT special pa-
rameter are modied during the execution or evaluation of
the action to refer only to the words after the option. When
preceded by three colons, they are modied to refer only to
the words covered by this description.
Any literal colon in an optname, message, or action must be preceded by a backslash,
\:.
Each of the forms above may be preceded by a list in parentheses of option names
and argument numbers. If the given option is on the command line, the options and
arguments indicated in parentheses will not be oered. For example, (-two -three
1)-one:... completes the option -one; if this appears on the command line, the
options -two and -three and the rst ordinary argument will not be completed
after it. (-foo):... species an ordinary argument completion; -foo will not be
completed if that argument is already present.
Other items may appear in the list of excluded options to indicate various other
items that should not be applied when the current specication is matched: a single
star (*) for the rest arguments (i.e. a specication of the form *:...); a colon
(:) for all normal (non-option-) arguments; and a hyphen (-) for all options. For
example, if (*) appears before an option and the option appears on the command
line, the list of remaining arguments (those shown in the above table beginning with
*:) will not be completed.
To aid in reuse of specications, it is possible to precede any of the forms above with
!; then the form will no longer be completed, although if the option or argument
appears on the command line they will be skipped as normal. The main use for this
is when the arguments are given by an array, and _arguments is called repeatedly
for more specic contexts: on the rst call _arguments $global_options is used,
and on subsequent calls _arguments !$^global_options.
In each of the forms above the action determines how completions should be gener-
ated. Except for the ->string form below, the action will be executed by calling
the _all_labels function to process all tag labels. No special handling of tags is
needed unless a function call introduces a new one.
The option -O name species the name of an array whose elements will be passed
as arguments to functions called to execute actions. For example, this can be used
to pass the same set of options for the compadd builtin to all actions.
The forms for action are as follows.
(single unquoted space)
This is useful where an argument is required but it is not possible or
desirable to generate matches for it. The message will be displayed but
no completions listed. Note that even in this case the colon at the end of
Chapter 20: Completion System 238
the message is needed; it may only be omitted when neither a message
nor an action is given.
(item1 item2 ...)
One of a list of possible matches, for example:
:foo:(foo bar baz)
((item1\:desc1 ...))
Similar to the above, but with descriptions for each possible match.
Note the backslash before the colon. For example,
:foo:((a\:bar b\:baz))
The matches will be listed together with their descriptions if the
description style is set with the values tag in the context.
->string In this form, _arguments processes the arguments and options and then
returns control to the calling function with parameters set to indicate
the state of processing; the calling function then makes its own ar-
rangements for generating completions. For example, functions that
implement a state machine can use this type of action.
Where _arguments encounters action in the ->string format, it will
strip all leading and trailing whitespace from string and set the array
state to the set of all strings for which an action is to be performed.
The elements of the array state_descr are assigned the corresponding
message eld from each optarg containing such an action.
By default and in common with all other well behaved completion func-
tions, arguments returns status zero if it was able to add matches and
non-zero otherwise. However, if the -R option is given, _arguments will
instead return a status of 300 to indicate that $state is to be handled.
In addition to $state and $state_descr, _arguments also sets the
global parameters context, line and opt_args as described below,
and does not reset any changes made to the special parameters such as
PREFIX and words. This gives the calling function the choice of resetting
these parameters or propagating changes in them.
A function calling _arguments with at least one action containing a
->string must therefore declare appropriate local parameters:
local context state state_descr line
typeset -A opt_args
to prevent _arguments from altering the global environment.
{eval-string}
A string in braces is evaluated as shell code to generate matches. If the
eval-string itself does not begin with an opening parenthesis or brace it
is split into separate words before execution.
= action If the action starts with = (an equals sign followed by a space),
_arguments will insert the contents of the argument eld of the cur-
rent context as the new rst element in the words special array and
increment the value of the CURRENT special parameter. This has the
eect of inserting a dummy word onto the completion command line
while not changing the point at which completion is taking place.
This is most useful with one of the speciers that restrict the words
on the command line on which the action is to operate (the two- and
Chapter 20: Completion System 239
three-colon forms above). One particular use is when an action itself
causes _arguments on a restricted range; it is necessary to use this trick
to insert an appropriate command name into the range for the second
call to _arguments to be able to parse the line.
word...
word... This covers all forms other than those above. If the action starts with
a space, the remaining list of words will be invoked unchanged.
Otherwise it will be invoked with some extra strings placed after the rst
word; these are to be passed down as options to the compadd builtin.
They ensure that the state specied by _arguments, in particular the
descriptions of options and arguments, is correctly passed to the com-
pletion command. These additional arguments are taken from the array
parameter expl; this will be set up before executing the action and
hence may be referred to inside it, typically in an expansion of the form
$expl[@] which preserves empty elements of the array.
During the performance of the action the array line will be set to the normal
arguments from the command line, i.e. the words from the command line after the
command name excluding all options and their arguments. Options are stored in
the associative array opt_args with option names as keys and their arguments as
the values. For options that have more than one argument these are given as one
string, separated by colons. All colons in the original arguments are preceded with
backslashes.
The parameter context is set when returning to the calling function to perform
an action of the form ->string. It is set to an array of elements corresponding to
the elements of $state. Each element is a suitable name for the argument eld of
the context: either a string of the form option-opt-n for the nth argument of
the option -opt, or a string of the form argument-n for the nth argument. For
rest arguments, that is those in the list at the end not handled by position, n is
the string rest. For example, when completing the argument of the -o option,
the name is option-o-1, while for the second normal (non-option-) argument it is
argument-2.
Furthermore, during the evaluation of the action the context name in the
curcontext parameter is altered to append the same string that is stored in the
context parameter.
The option -C tells _arguments to modify the curcontext parameter for an action
of the form ->state. This is the standard parameter used to keep track of the
current context. Here it (and not the context array) should be made local to the
calling function to avoid passing back the modied value and should be initialised
to the current value at the start of the function:
local curcontext="$curcontext"
This is useful where it is not possible for multiple states to be valid together.
It is possible to specify multiple sets of options and arguments with the sets separated
by single hyphens. The specications before the rst hyphen (if any) are shared by
all the remaining sets. The rst word in every other set provides a name for the set
which may appear in exclusion lists in specications, either alone or before one of
the possible values described above. In the second case a - should appear between
this name and the remainder.
For example:
_arguments \
Chapter 20: Completion System 240
-a \
- set1 \
-c \
- set2 \
-d \
:arg:(x2 y2)
This denes two sets. When the command line contains the option -c, the -
d option and the argument will not be considered possible completions. When it
contains -d or an argument, the option -c will not be considered. However, after
-a both sets will still be considered valid.
If the name given for one of the mutually exclusive sets is of the form (name) then
only one value from each set will ever be completed; more formally, all specications
are mutually exclusive to all other specications in the same set. This is useful for
dening multiple sets of options which are mutually exclusive and in which the
options are aliases for each other. For example:
_arguments \
-a -b \
- (compress) \
{-c,--compress}[compress] \
- (uncompress) \
{-d,--decompress}[decompress]
As the completion code has to parse the command line separately for each set
this form of argument is slow and should only be used when necessary. A useful
alternative is often an option specication with rest-arguments (as in -foo:*:...);
here the option -foo swallows up all remaining arguments as described by the optarg
denitions.
The option -- allows _arguments to work out the names of long options that
support the --help option which is standard in many GNU commands. The
command word is called with the argument --help and the output examined for
option names. Clearly, it can be dangerous to pass this to commands which may
not support this option as the behaviour of the command is unspecied.
In addition to options, _arguments -- will try to deduce the types of arguments
available for options when the form --opt=val is valid. It is also possible to provide
hints by examining the help text of the command and adding helpspec of the form
pattern:message:action; note that other _arguments spec forms are not used. The
pattern is matched against the help text for an option, and if it matches the message
and action are used as for other argument speciers. The special case of *: means
both message and action are empty, which has the eect of causing options having
no description in the help output to be ordered in listings ahead of options that
have a description.
For example:
_arguments -- *\*:toggle:(yes no) \
*=FILE*:file:_files \
*=DIR*:directory:_files -/ \
*=PATH*:directory:_files -/
Here, yes and no will be completed as the argument of options whose description
ends in a star; le names will be completed for options that contain the substring
=FILE in the description; and directories will be completed for options whose de-
scription contains =DIR or =PATH. The last three are in fact the default and so
Chapter 20: Completion System 241
need not be given explicitly, although it is possible to override the use of these
patterns. A typical help text which uses this feature is:
-C, --directory=DIR change to directory DIR
so that the above specications will cause directories to be completed after --
directory, though not after -C.
Note also that _arguments tries to nd out automatically if the argument for an
option is optional. This can be specied explicitly by doubling the colon before the
message.
If the pattern ends in (-), this will be removed from the pattern and the action
will be used only directly after the =, not in the next word. This is the behaviour
of a normal specication dened with the form =-.
The _arguments -- can be followed by the option -i patterns to give patterns
for options which are not to be completed. The patterns can be given as the name
of an array parameter or as a literal list in parentheses. For example,
_arguments -- -i \
"(--(en|dis)able-FEATURE*)"
will cause completion to ignore the options --enable-FEATURE and --disable-
FEATURE (this example is useful with GNU configure).
The _arguments -- form can also be followed by the option -s pair to describe
option aliases. The pair consists of a list of alternating patterns and corresponding
replacements, enclosed in parens and quoted so that it forms a single argument word
in the _arguments call.
For example, some configure-script help output describes options only as --
enable-foo, but the script also accepts the negated form --disable-foo. To
allow completion of the second form:
_arguments -- -s "(#--enable- --disable-)"
Finally, note that _arguments generally expects to be the primary function handling
any completion for which it is used. It may have side eects which change the
treatment of any matches added by other functions called after it. To combine
_arguments with other functions, those functions should be called either before
_arguments, as an action within a spec, or in handlers for ->state actions.
Here is a more general example of the use of _arguments:
_arguments -l+:left border: \
-format:paper size:(letter A4) \
*-copy:output file:_files::resolution:(300 600) \
:postscript file:_files -g \*.\(ps\|eps\) \
*:page number:
This describes three options: -l, -format, and -copy. The rst takes one
argument described as left border for which no completion will be oered because
of the empty action. Its argument may come directly after the -l or it may be
given as the next word on the line.
The -format option takes one argument in the next word, described as paper size
for which only the strings letter and A4 will be completed.
The -copy option may appear more than once on the command line and takes two
arguments. The rst is mandatory and will be completed as a lename. The second
is optional (because of the second colon before the description resolution) and will
be completed from the strings 300 and 600.
The last two descriptions say what should be completed as arguments. The rst
describes the rst argument as a postscript le and makes les ending in ps or
Chapter 20: Completion System 242
eps be completed. The last description gives all other arguments the description
page numbers but does not oer completions.
_cache_invalid cache identier
This function returns status zero if the completions cache corresponding to the given
cache identier needs rebuilding. It determines this by looking up the cache-policy
style for the current context. This should provide a function name which is run with
the full path to the relevant cache le as the only argument.
Example:
_example_caching_policy () {
# rebuild if cache is more than a week old
local -a oldp
oldp=( "$1"(Nm+7) )
(( $#oldp ))
}
_call_function return name [ args ... ]
If a function name exists, it is called with the arguments args. The return argument
gives the name of a parameter in which the return status from the function name
should be stored; if return is empty or a single hyphen it is ignored.
The return status of _call_function itself is zero if the function name exists and
was called and non-zero otherwise.
_call_program tag string ...
This function provides a mechanism for the user to override the use of an external
command. It looks up the command style with the supplied tag. If the style is
set, its value is used as the command to execute. The strings from the call to
_call_program, or from the style if set, are concatenated with spaces between
them and the resulting string is evaluated. The return status is the return status of
the command called.
_combination [ -s pattern ] tag style spec ... eld opts ...
This function is used to complete combinations of values, for example pairs of host-
names and usernames. The style argument gives the style which denes the pairs;
it is looked up in a context with the tag specied.
The style name consists of eld names separated by hyphens, for example users-
hosts-ports. For each eld for a value is already known, a spec of the form
eld=pattern is given. For example, if the command line so far species a user
pws, the argument users=pws should appear.
The next argument with no equals sign is taken as the name of the eld for which
completions should be generated (presumably not one of the elds for which the
value is known).
The matches generated will be taken from the value of the style. These should con-
tain the possible values for the combinations in the appropriate order (users, hosts,
ports in the example above). The dierent elds the values for the dierent elds are
separated by colons. This can be altered with the option -s to _combination which
species a pattern. Typically this is a character class, as for example -s "[:@]"
in the case of the users-hosts style. Each eld=pattern specication restricts the
completions which apply to elements of the style with appropriately matching elds.
If no style with the given name is dened for the given tag, or if none of the strings
in styles value match, but a function name of the required eld preceded by an
underscore is dened, that function will be called to generate the matches. For
Chapter 20: Completion System 243
example, if there is no users-hosts-ports or no matching hostname when a host
is required, the function _hosts will automatically be called.
If the same name is used for more than one eld, in both the eld=pattern and the
argument that gives the name of the eld to be completed, the number of the eld
(starting with one) may be given after the eldname, separated from it by a colon.
All arguments after the required eld name are passed to compadd when generating
matches from the style value, or to the functions for the elds if they are called.
_describe [ -oO | -t tag ] descr name1 [ name2 ] opts ... -- ...
This function associates completions with descriptions. Multiple groups separated
by -- can be supplied, potentially with dierent completion options opts.
The descr is taken as a string to display above the matches if the format style for
the descriptions tag is set. This is followed by one or two names of arrays followed
by options to pass to compadd. The rst array contains the possible completions
with their descriptions in the form completion:description. Any literal colons
in completion must be quoted with a backslash. If a second array is given, it
should have the same number of elements as the rst; in this case the corresponding
elements are added as possible completions instead of the completion strings from
the rst array. The completion list will retain the descriptions from the rst array.
Finally, a set of completion options can appear.
If the option -o appears before the rst argument, the matches added will be
treated as names of command options (N.B. not shell options), typically following
a -, -- or + on the command line. In this case _describe uses the prefix-
hidden, prefix-needed and verbose styles to nd out if the strings should be
added as completions and if the descriptions should be shown. Without the -o
option, only the verbose style is used to decide how descriptions are shown. If -O
is used instead of -o, command options are completed as above but _describe
will not handle the prefix-needed style.
With the -t option a tag can be specied. The default is values or, if the -o
option is given, options.
If selected by the list-grouped style, strings with the same description will appear
together in the list.
_describe uses the _all_labels function to generate the matches, so it does not
need to appear inside a loop over tag labels.
_description [ -x ] [ -12VJ ] tag name descr [ spec ... ]
This function is not to be confused with the previous one; it is used as a helper
function for creating options to compadd. It is buried inside many of the higher level
completion functions and so often does not need to be called directly.
The styles listed below are tested in the current context using the given tag. The re-
sulting options for compadd are put into the array named name (this is traditionally
expl, but this convention is not enforced). The description for the corresponding
set of matches is passed to the function in descr.
The styles tested are: format, hidden, matcher, ignored-patterns and group-
name. The format style is rst tested for the given tag and then for the
descriptions tag if no value was found, while the remainder are only tested for
the tag given as the rst argument. The function also calls _setup which tests some
more styles.
The string returned by the format style (if any) will be modied so that the sequence
%d is replaced by the descr given as the third argument without any leading or
trailing white space. If, after removing the white space, the descr is the empty
Chapter 20: Completion System 244
string, the format style will not be used and the options put into the name array
will not contain an explanation string to be displayed above the matches.
If _description is called with more than three arguments, the additional specs
should be of the form char:str. These supply escape sequence replacements for
the format style: every appearance of %char will be replaced by string.
If the -x option is given, the description will be passed to compadd using the -x
option instead of the default -X. This means that the description will be displayed
even if there are no corresponding matches.
The options placed in the array name take account of the group-name style, so
matches are placed in a separate group where necessary. The group normally has
its elements sorted (by passing the option -J to compadd), but if an option starting
with -V, -J, -1, or -2 is passed to _description, that option will be included
in the array. Hence it is possible for the completion group to be unsorted by giving
the option -V, -1V, or -2V.
In most cases, the function will be used like this:
local expl
_description files expl file
compadd "$expl[@]" - "$files[@]"
Note the use of the parameter expl, the hyphen, and the list of matches. Almost
all calls to compadd within the completion system use a similar format; this ensures
that user-specied styles are correctly passed down to the builtins which implement
the internals of completion.
_dispatch context string ...
This sets the current context to context and looks for completion functions to handle
this context by hunting through the list of command names or special contexts (as
described above for compdef) given as string .... The rst completion function to
be dened for one of the contexts in the list is used to generate matches. Typically,
the last string is -default- to cause the function for default completion to be used
as a fallback.
The function sets the parameter $service to the string being tried, and sets the
context/command eld (the fourth) of the $curcontext parameter to the context
given as the rst argument.
_files The function _files calls _path_files with all the arguments it was passed except
for -g and -/. The use of these two options depends on the setting of the file-
patterns style.
This function accepts the full set of options allowed by _path_files, described
below.
_gnu_generic
This function is a simple wrapper around the _arguments function described above.
It can be used to determine automatically the long options understood by commands
that produce a list when passed the option --help. It is intended to be used as
a top-level completion function in its own right. For example, to enable option
completion for the commands foo and bar, use
compdef _gnu_generic foo bar
after the call to compinit.
The completion system as supplied is conservative in its use of this function, since
it is important to be sure the command understands the option --help.
Chapter 20: Completion System 245
_guard [ options ] pattern descr
This function is intended to be used in the action for the specications passed to
_arguments and similar functions. It returns immediately with a non-zero return
status if the string to be completed does not match the pattern. If the pattern
matches, the descr is displayed; the function then returns status zero if the word to
complete is not empty, non-zero otherwise.
The pattern may be preceded by any of the options understood by compadd that are
passed down from _description, namely -M, -J, -V, -1, -2, -n, -F and -X. All of
these options will be ignored. This ts in conveniently with the argument-passing
conventions of actions for _arguments.
As an example, consider a command taking the options -n and -none, where -n
must be followed by a numeric value in the same word. By using:
_arguments -n-: :_guard "[0-9]#" "numeric value" -none
_arguments can be made to both display the message numeric value and com-
plete options after -n<TAB>. If the -n is already followed by one or more digits
(the pattern passed to _guard) only the message will be displayed; if the -n is
followed by another character, only options are completed.
_message [ -r12 ] [ -VJ group ] descr
_message -e [ tag ] descr
The descr is used in the same way as the third argument to the _description func-
tion, except that the resulting string will always be shown whether or not matches
were generated. This is useful for displaying a help message in places where no
completions can be generated.
The format style is examined with the messages tag to nd a message; the usual
tag, descriptions, is used only if the style is not set with the former.
If the -r option is given, no style is used; the descr is taken literally as the string to
display. This is most useful when the descr comes from a pre-processed argument
list which already contains an expanded description.
The -12VJ options and the group are passed to compadd and hence determine the
group the message string is added to.
The second -e form gives a description for completions with the tag tag to be shown
even if there are no matches for that tag. This form is called by _arguments in the
event that there is no action for an option specication. The tag can be omitted
and if so the tag is taken from the parameter $curtag; this is maintained by the
completion system and so is usually correct. Note that if there are no matches at the
time this function is called, compstate[insert] is cleared, so additional matches
generated later are not inserted on the command line.
_multi_parts sep array
The argument sep is a separator character. The array may be either the name of
an array parameter or a literal array in the form (foo bar), a parenthesised list
of words separated by whitespace. The possible completions are the strings from
the array. However, each chunk delimited by sep will be completed separately. For
example, the _tar function uses _multi_parts / patharray to complete partial
le paths from the given array of complete le paths.
The -i option causes _multi_parts to insert a unique match even if that requires
multiple separators to be inserted. This is not usually the expected behaviour with
lenames, but certain other types of completion, for example those with a xed set
of possibilities, may be more suited to this form.
Chapter 20: Completion System 246
Like other utility functions, this function accepts the -V, -J, -1, -2, -n, -f,
-X, -M, -P, -S, -r, -R, and -q options and passes them to the compadd
builtin.
_next_label [ -x ] [ -12VJ ] tag name descr [ options ... ]
This function is used to implement the loop over dierent tag labels for a particular
tag as described above for the tag-order style. On each call it checks to see if there
are any more tag labels; if there is it returns status zero, otherwise non-zero. As
this function requires a current tag to be set, it must always follow a call to _tags
or _requested.
The -x12VJ options and the rst three arguments are passed to the _description
function. Where appropriate the tag will be replaced by a tag label in this call.
Any description given in the tag-order style is preferred to the descr passed to
_next_label.
The options given after the descr are set in the parameter given by name, and hence
are to be passed to compadd or whatever function is called to add the matches.
Here is a typical use of this function for the tag foo. The call to _requested
determines if tag foo is required at all; the loop over _next_label handles any
labels dened for the tag in the tag-order style.
local expl ret=1
...
if _requested foo; then
...
while _next_label foo expl ...; do
compadd "$expl[@]" ... && ret=0
done
...
fi
return ret
_normal This is the standard function called to handle completion outside any special -
context-. It is called both to complete the command word and also the arguments
for a command. In the second case, _normal looks for a special completion for that
command, and if there is none it uses the completion for the -default- context.
A second use is to reexamine the command line specied by the $words array and
the $CURRENT parameter after those have been modied. For example, the function
_precommand, which completes after pre-command speciers such as nohup, removes
the rst word from the words array, decrements the CURRENT parameter, then calls
_normal again. The eect is that nohup cmd ... is treated in the same way as cmd
....
If the command name matches one of the patterns given by one of the options -p
or -P to compdef, the corresponding completion function is called and then the
parameter _compskip is checked. If it is set completion is terminated at that point
even if no matches have been found. This is the same eect as in the -first-
context.
_options This can be used to complete the names of shell options. It provides a matcher speci-
cation that ignores a leading no, ignores underscores and allows upper-case letters
to match their lower-case counterparts (for example, glob, noglob, NO_GLOB are
all completed). Any arguments are propagated to the compadd builtin.
Chapter 20: Completion System 247
_options_set and _options_unset
These functions complete only set or unset options, with the same matching speci-
cation used in the _options function.
Note that you need to uncomment a few lines in the _main_complete function for
these functions to work properly. The lines in question are used to store the option
settings in eect before the completion widget locally sets the options it needs.
Hence these functions are not generally used by the completion system.
_parameters
This is used to complete the names of shell parameters.
The option -g pattern limits the completion to parameters whose type matches
the pattern. The type of a parameter is that shown by print ${(t)param}, hence
judicious use of * in pattern is probably necessary.
All other arguments are passed to the compadd builtin.
_path_files
This function is used throughout the completion system to complete lenames. It
allows completion of partial paths. For example, the string /u/i/s/sig may be
completed to /usr/include/sys/signal.h.
The options accepted by both _path_files and _files are:
-f Complete all lenames. This is the default.
-/ Species that only directories should be completed.
-g pattern Species that only les matching the pattern should be completed.
-W paths Species path prexes that are to be prepended to the string from
the command line to generate the lenames but that should not be
inserted as completions nor shown in completion listings. Here, paths
may be the name of an array parameter, a literal list of paths enclosed
in parentheses or an absolute pathname.
-F ignored-les
This behaves as for the corresponding option to the compadd builtin.
It gives direct control over which lenames should be ignored. If the
option is not present, the ignored-patterns style is used.
Both _path_files and _files also accept the following options which are passed
to compadd: -J, -V, -1, -2, -n, -X, -M, -P, -S, -q, -r, and -R.
Finally, the _path_files function uses the styles expand, ambiguous, special-
dirs, list-suffixes and file-sort described above.
_pick_variant [ -b builtin-label ] [ -c command ] [ -r name ]
label=pattern ... label [ args ... ]
This function is used to resolve situations where a single command name requires
more than one type of handling, either because it has more than one variant or
because there is a name clash between two dierent commands.
The command to run is taken from the rst element of the array words unless this
is overridden by the option -c. This command is run and its output is compared
with a series of patterns. Arguments to be passed to the command can be specied
at the end after all the other arguments. The patterns to try in order are given by
the arguments label=pattern; if the output of command args ... contains pattern,
then label is selected as the label for the command variant. If none of the patterns
match, the nal command label is selected and status 1 is returned.
Chapter 20: Completion System 248
If the -b builtin-label is given, the command is tested to see if it is provided as
a shell builtin, possibly autoloaded; if so, the label builtin-label is selected as the
label for the variant.
If the -r name is given, the label picked is stored in the parameter named name.
The results are also cached in the cmd variant associative array indexed by the
name of the command run.
_regex_arguments name spec ...
This function generates a completion function name which matches the speci-
cations spec ..., a set of regular expressions as described below. After running
_regex_arguments, the function name should be called as a normal completion
function. The pattern to be matched is given by the contents of the words array up
to the current cursor position joined together with null characters; no quotation is
applied.
The arguments are grouped as sets of alternatives separated by |, which are tried
one after the other until one matches. Each alternative consists of a one or more
specications which are tried left to right, with each pattern matched being stripped
in turn from the command line being tested, until all of the group succeeds or until
one fails; in the latter case, the next alternative is tried. This structure can be
repeated to arbitrary depth by using parentheses; matching proceeds from inside to
outside.
A special procedure is applied if no test succeeds but the remaining command line
string contains no null character (implying the remaining word is the one for which
completions are to be generated). The completion target is restricted to the remain-
ing word and any actions for the corresponding patterns are executed. In this case,
nothing is stripped from the command line string. The order of evaluation of the
actions can be determined by the tag-order style; the various formats supported
by _alternative can be used in action. The descr is used for setting up the array
parameter expl.
Specication arguments take one of following forms, in which metacharacters such
as (, ), # and | should be quoted.
/pattern/ [%lookahead%] [-guard] [:tag:descr:action]
This is a single primitive component. The function tests whether the
combined pattern (#b)((#B)pattern)lookahead* matches the com-
mand line string. If so, guard is evaluated and its return status is
examined to determine if the test has succeeded. The pattern string
[] is guaranteed never to match. The lookahead is not stripped from
the command line before the next pattern is examined.
The argument starting with : is used in the same manner as an argument
to _alternative.
A component is used as follows: pattern is tested to see if the com-
ponent already exists on the command line. If it does, any following
specications are examined to nd something to complete. If a com-
ponent is reached but no such pattern exists yet on the command line,
the string containing the action is used to generate matches to insert at
that point.
/pattern/+ [%lookahead%] [-guard] [:tag:descr:action]
This is similar to /pattern/ ... but the left part of the command
line string (i.e. the part already matched by previous patterns) is also
considered part of the completion target.
Chapter 20: Completion System 249
/pattern/- [%lookahead%] [-guard] [:tag:descr:action]
This is similar to /pattern/ ... but the actions of the current and
previously matched patterns are ignored even if the following pattern
matches the empty string.
( spec ) Parentheses may be used to groups specs; note each parenthesis is a
single argument to _regex_arguments.
spec # This allows any number of repetitions of spec.
spec spec The two specs are to be matched one after the other as described above.
spec | spec
Either of the two specs can be matched.
The function _regex_words can be used as a helper function to generate matches
for a set of alternative words possibly with their own arguments as a command line
argument.
Examples:
_regex_arguments _tst /$[^\0]#\0/ \
/$[^\0]#\0/ :compadd aaa
This generates a function _tst that completes aaa as its only argument. The tag
and description for the action have been omitted for brevity (this works but is not
recommended in normal use). The rst component matches the command word,
which is arbitrary; the second matches any argument. As the argument is also
arbitrary, any following component would not depend on aaa being present.
_regex_arguments _tst /$[^\0]#\0/ \
/$aaa\0/ :compadd aaa
This is a more typical use; it is similar, but any following patterns would only match
if aaa was present as the rst argument.
_regex_arguments _tst /$[^\0]#\0/ \( \
/$aaa\0/ :compadd aaa \
/$bbb\0/ :compadd bbb \) \#
In this example, an indenite number of command arguments may be completed.
Odd arguments are completed as aaa and even arguments as bbb. Completion fails
unless the set of aaa and bbb arguments before the current one is matched correctly.
_regex_arguments _tst /$[^\0]#\0/ \
\( /$aaa\0/ :compadd aaa \| \
/$bbb\0/ :compadd bbb \) \#
This is similar, but either aaa or bbb may be completed for any argument. In
this case _regex_words could be used to generate a suitable expression for the
arguments.
_regex_words tag description spec ...
This function can be used to generate arguments for the _regex_arguments com-
mand which may be inserted at any point where a set of rules is expected. The
tag and description give a standard tag and description pertaining to the current
context. Each spec contains two or three arguments separated by a colon: note that
there is no leading colon in this case.
Each spec gives one of a set of words that may be completed at this point, together
with arguments. It is thus roughly equivalent to the _arguments function when
used in normal (non-regex) completion.
Chapter 20: Completion System 250
The part of the spec before the rst colon is the word to be completed. This may
contain a *; the entire word, before and after the * is completed, but only the text
before the * is required for the context to be matched, so that further arguments
may be completed after the abbreviated form.
The second part of spec is a description for the word being completed.
The optional third part of the spec describes how words following the one being
completed are themselves to be completed. It will be evaluated in order to avoid
problems with quoting. This means that typically it contains a reference to an array
containing previously generated regex arguments.
The option -t term species a terminator for the word instead of the usual space.
This is handled as an auto-removable sux in the manner of the option -s sep to
_values.
The result of the processing by _regex_words is placed in the array reply, which
should be made local to the calling function. If the set of words and arguments
may be matched repeatedly, a # should be appended to the generated array at that
point.
For example:
local -a reply
_regex_words mydb-commands mydb commands \
add:add an entry to mydb:$mydb_add_cmds \
show:show entries in mydb
_regex_arguments _mydb "$reply[@]"
_mydb "$@"
This shows a completion function for a command mydb which takes two command
arguments, add and show. show takes no arguments, while the arguments for add
have already been prepared in an array mydb_add_cmds, quite possibly by a previous
call to _regex_words.
_requested [ -x ] [ -12VJ ] tag [ name descr [ command args ... ] ]
This function is called to decide whether a tag already registered by a call to _tags
(see below) has been requested by the user and hence completion should be per-
formed for it. It returns status zero if the tag is requested and non-zero otherwise.
The function is typically used as part of a loop over dierent tags as follows:
_tags foo bar baz
while _tags; do
if _requested foo; then
... # perform completion for foo
fi
... # test the tags bar and baz in the same way
... # exit loop if matches were generated
done
Note that the test for whether matches were generated is not performed until the
end of the _tags loop. This is so that the user can set the tag-order style to specify
a set of tags to be completed at the same time.
If name and descr are given, _requested calls the _description function with
these arguments together with the options passed to _requested.
If command is given, the _all_labels function will be called immediately with the
same arguments. In simple cases this makes it possible to perform the test for the
tag and the matching in one go. For example:
local expl ret=1
Chapter 20: Completion System 251
_tags foo bar baz
while _tags; do
_requested foo expl description \
compadd foobar foobaz && ret=0
...
(( ret )) || break
done
If the command is not compadd, it must nevertheless be prepared to handle the same
options.
_retrieve_cache cache identier
This function retrieves completion information from the le given by
cache identier, stored in a directory specied by the cache-path style which
defaults to ~/.zcompcache. The return status is zero if retrieval was successful.
It will only attempt retrieval if the use-cache style is set, so you can call this
function without worrying about whether the user wanted to use the caching layer.
See _store_cache below for more details.
_sep_parts
This function is passed alternating arrays and separators as arguments. The arrays
specify completions for parts of strings to be separated by the separators. The arrays
may be the names of array parameters or a quoted list of words in parentheses. For
example, with the array hosts=(ftp news) the call _sep_parts (foo bar) @
hosts will complete the string f to foo and the string b@n to bar@news.
This function accepts the compadd options -V, -J, -1, -2, -n, -X, -M, -P,
-S, -r, -R, and -q and passes them on to the compadd builtin used to add the
matches.
_sequence [ -s sep ] [ -n max ] [ -d ] function [ - ] ...
This function is a wrapper to other functions for completing items in a separated
list. The same function is used to complete each item in the list. The separator is
specied with the -s option. If -s is omitted it will use ,. Duplicate values are
not matched unless -d is specied. If there is a xed or maximum number of items
in the list, this can be specied with the -n option.
Common compadd options are passed on to the function. It is possible to use compadd
directly with _sequence, though _values may be more appropriate in this situation.
_setup tag [ group ]
This function sets up the special parameters used by the completion system appro-
priately for the tag given as the rst argument. It uses the styles list-colors,
list-packed, list-rows-first, last-prompt, accept-exact, menu and force-
list.
The optional group supplies the name of the group in which the matches will be
placed. If it is not given, the tag is used as the group name.
This function is called automatically from _description and hence is not normally
called explicitly.
_store_cache cache identier params ...
This function, together with _retrieve_cache and _cache_invalid, implements
a caching layer which can be used in any completion function. Data obtained by
costly operations are stored in parameters; this function then dumps the values of
those parameters to a le. The data can then be retrieved quickly from that le via
_retrieve_cache, even in dierent instances of the shell.
Chapter 20: Completion System 252
The cache identier species the le which the data should be dumped to. The
le is stored in a directory specied by the cache-path style which defaults to
~/.zcompcache. The remaining params arguments are the parameters to dump to
the le.
The return status is zero if storage was successful. The function will only attempt
storage if the use-cache style is set, so you can call this function without worrying
about whether the user wanted to use the caching layer.
The completion function may avoid calling _retrieve_cache when it already has
the completion data available as parameters. However, in that case it should call
_cache_invalid to check whether the data in the parameters and in the cache are
still valid.
See the perl modules completion function for a simple example of the usage of the
caching layer.
_tags [ [ -C name ] tags ... ]
If called with arguments, these are taken to be the names of tags valid for comple-
tions in the current context. These tags are stored internally and sorted by using
the tag-order style.
Next, _tags is called repeatedly without arguments from the same completion func-
tion. This successively selects the rst, second, etc. set of tags requested by the
user. The return status is zero if at least one of the tags is requested and non-zero
otherwise. To test if a particular tag is to be tried, the _requested function should
be called (see above).
If -C name is given, name is temporarily stored in the argument eld (the fth)
of the context in the curcontext parameter during the call to _tags; the eld is
restored on exit. This allows _tags to use a more specic context without having
to change and reset the curcontext parameter (which has the same eect).
_values [ -O name ] [ -s sep ] [ -S sep ] [ -wC ] desc spec ...
This is used to complete arbitrary keywords (values) and their arguments, or lists
of such combinations.
If the rst argument is the option -O name, it will be used in the same way as by
the _arguments function. In other words, the elements of the name array will be
passed to compadd when executing an action.
If the rst argument (or the rst argument after -O name) is -s, the next ar-
gument is used as the character that separates multiple values. This character is
automatically added after each value in an auto-removable fashion (see below); all
values completed by _values -s appear in the same word on the command line,
unlike completion using _arguments. If this option is not present, only a single
value will be completed per word.
Normally, _values will only use the current word to determine which values are
already present on the command line and hence are not to be completed again. If
the -w option is given, other arguments are examined as well.
The rst non-option argument is used as a string to print as a description before
listing the values.
All other arguments describe the possible values and their arguments in the same
format used for the description of options by the _arguments function (see above).
The only dierences are that no minus or plus sign is required at the beginning,
values can have only one argument, and the forms of action beginning with an equal
sign are not supported.
Chapter 20: Completion System 253
The character separating a value from its argument can be set using the option -S
(like -s, followed by the character to use as the separator in the next argument). By
default the equals sign will be used as the separator between values and arguments.
Example:
_values -s , description \
*foo[bar] \
(two)*one[number]:first count: \
two[another number]::second count:(1 2 3)
This describes three possible values: foo, one, and two. The rst is described as
bar, takes no argument and may appear more than once. The second is described as
number, may appear more than once, and takes one mandatory argument described
as first count; no action is specied, so it will not be completed. The (two) at
the beginning says that if the value one is on the line, the value two will no longer
be considered a possible completion. Finally, the last value (two) is described as
another number and takes an optional argument described as second count for
which the completions (to appear after an =) are 1, 2, and 3. The _values
function will complete lists of these values separated by commas.
Like _arguments, this function temporarily adds another context name component
to the arguments element (the fth) of the current context while executing the
action. Here this name is just the name of the value for which the argument is
completed.
The style verbose is used to decide if the descriptions for the values (but not those
for the arguments) should be printed.
The associative array val_args is used to report values and their arguments; this
works similarly to the opt_args associative array used by _arguments. Hence the
function calling _values should declare the local parameters state, state_descr,
line, context and val_args:
local context state state_descr line
typeset -A val_args
when using an action of the form ->string. With this function the context pa-
rameter will be set to the name of the value whose argument is to be completed.
Note that for _values, the state and state_descr are scalars rather than arrays.
Only a single matching state is returned.
Note also that _values normally adds the character used as the separator between
values as an auto-removable sux (similar to a / after a directory). However, this
is not possible for a ->string action as the matches for the argument are generated
by the calling function. To get the usual behaviour, the calling function can add the
separator x as a sux by passing the options -qS x either directly or indirectly to
compadd.
The option -C is treated in the same way as it is by _arguments. In that case
the parameter curcontext should be made local instead of context (as described
above).
_wanted [ -x ] [ -C name ] [ -12VJ ] tag name descr command args ...
In many contexts, completion can only generate one particular set of matches, usu-
ally corresponding to a single tag. However, it is still necessary to decide whether
the user requires matches of this type. This function is useful in such a case.
The arguments to _wanted are the same as those to _requested, i.e. arguments to
be passed to _description. However, in this case the command is not optional;
all the processing of tags, including the loop over both tags and tag labels and the
generation of matches, is carried out automatically by _wanted.
Chapter 21: Completion Using compctl 254
Hence to oer only one tag and immediately add the corresponding matches with
the given description:
local expl
_wanted tag expl description \
compadd matches...
Note that, as for _requested, the command must be able to accept options to be
passed down to compadd.
Like _tags this function supports the -C option to give a dierent name for the
argument context eld. The -x option has the same meaning as for _description.
20.7 Completion Directories
In the source distribution, the les are contained in various subdirectories of the Completion
directory. They may have been installed in the same structure, or into one single function
directory. The following is a description of the les found in the original directory structure.
If you wish to alter an installed le, you will need to copy it to some directory which appears
earlier in your fpath than the standard directory where it appears.
Base The core functions and special completion widgets automatically bound to keys.
You will certainly need most of these, though will probably not need to alter them.
Many of these are documented above.
Zsh Functions for completing arguments of shell builtin commands and utility functions
for this. Some of these are also used by functions from the Unix directory.
Unix Functions for completing arguments of external commands and suites of commands.
They may need modifying for your system, although in many cases some attempt is
made to decide which version of a command is present. For example, completion for
the mount command tries to determine the system it is running on, while completion
for many other utilities try to decide whether the GNU version of the command is
in use, and hence whether the --help option is supported.
X, AIX, BSD, ...
Completion and utility function for commands available only on some systems.
These are not arranged hierarchically, so, for example, both the Linux and Debian
directories, as well as the X directory, may be useful on your system.
21 Completion Using compctl
21.1 Types of completion
This version of zsh has two ways of performing completion of words on the command line. New
users of the shell may prefer to use the newer and more powerful system based on shell functions;
this is described in Chapter 20 [Completion System], page 191, and the basic shell mechanisms
which support it are described in Chapter 19 [Completion Widgets], page 176. This chapter
describes the older compctl command.
Chapter 21: Completion Using compctl 255
21.2 Description
compctl [ -CDT ] options [ command ... ]
compctl [ -CDT ] options [ -x pattern options - ... -- ] [ + options [ -x ... -- ] ... [+] ] [
command ... ]
compctl -M match-specs ...
compctl -L [ -CDTM ] [ command ... ]
compctl + command ...
Control the editors completion behavior according to the supplied set of options. Various editing
commands, notably expand-or-complete-word, usually bound to tab, will attempt to complete
a word typed by the user, while others, notably delete-char-or-list, usually bound to ^D in
EMACS editing mode, list the possibilities; compctl controls what those possibilities are. They
may for example be lenames (the most common case, and hence the default), shell variables,
or words from a user-specied list.
21.3 Command Flags
Completion of the arguments of a command may be dierent for each command or may use
the default. The behavior when completing the command word itself may also be separately
specied. These correspond to the following ags and arguments, all of which (except for -L)
may be combined with any combination of the options described subsequently in Section 21.4
[Option Flags], page 256:
command ...
controls completion for the named commands, which must be listed last on the com-
mand line. If completion is attempted for a command with a pathname containing
slashes and no completion denition is found, the search is retried with the last
pathname component. If the command starts with a =, completion is tried with the
pathname of the command.
Any of the command strings may be patterns of the form normally used for lename
generation. These should be quoted to protect them from immediate expansion;
for example the command string foo* arranges for completion of the words of
any command beginning with foo. When completion is attempted, all pattern
completions are tried in the reverse order of their denition until one matches. By
default, completion then proceeds as normal, i.e. the shell will try to generate more
matches for the specic command on the command line; this can be overridden by
including -tn in the ags for the pattern completion.
Note that aliases are expanded before the command name is determined unless the
COMPLETE_ALIASES option is set. Commands may not be combined with the -C, -D
or -T ags.
-C controls completion when the command word itself is being completed. If no com-
pctl -C command has been issued, the names of any executable command (whether
in the path or specic to the shell, such as aliases or functions) are completed.
-D controls default completion behavior for the arguments of commands not assigned
any special behavior. If no compctl -D command has been issued, lenames are
completed.
-T supplies completion ags to be used before any other processing is done, even before
processing for compctls dened for specic commands. This is especially useful
when combined with extended completion (the -x ag, see Section 21.6 [Extended
Chapter 21: Completion Using compctl 256
Completion], page 261 below). Using this ag you can dene default behavior
which will apply to all commands without exception, or you can alter the standard
behavior for all commands. For example, if your access to the user database is too
slow and/or it contains too many users (so that completion after ~ is too slow to
be usable), you can use
compctl -T -x s[~] C[0,[^/]#] -k friends -S/ -tn
to complete the strings in the array friends after a ~. The C[...] argument is
necessary so that this form of ~-completion is not tried after the directory name is
nished.
-L lists the existing completion behavior in a manner suitable for putting into a start-up
script; the existing behavior is not changed. Any combination of the above forms, or
the -M ag (which must follow the -L ag), may be specied, otherwise all dened
completions are listed. Any other ags supplied are ignored.
no argument
If no argument is given, compctl lists all dened completions in an abbreviated form;
with a list of options, all completions with those ags set (not counting extended
completion) are listed.
If the + ag is alone and followed immediately by the command list, the completion behavior for
all the commands in the list is reset to the default. In other words, completion will subsequently
use the options specied by the -D ag.
The form with -M as the rst and only option denes global matching specications (see
Section 19.5 [Completion Matching Control], page 187). The match specications given will
be used for every completion attempt (only when using compctl, not with the new completion
system) and are tried in the order in which they are dened until one generates at least one
match. E.g.:
compctl -M m:{a-zA-Z}={A-Za-z}
This will rst try completion without any global match specications (the empty string) and, if
that generates no matches, will try case insensitive completion.
21.4 Option Flags
[ -fcFBdeaRGovNAIOPZEnbjrzu/12 ]
[ -k array ] [ -g globstring ] [ -s subststring ]
[ -K function ]
[ -Q ] [ -P prex ] [ -S sux ]
[ -W le-prex ] [ -H num pattern ]
[ -q ] [ -X explanation ] [ -Y explanation ]
[ -y func-or-var ] [ -l cmd ] [ -h cmd ] [ -U ]
[ -t continue ] [ -J name ] [ -V name ]
[ -M match-spec ]
The remaining options specify the type of command arguments to look for during completion.
Any combination of these ags may be specied; the result is a sorted list of all the possibilities.
The options are as follows.
21.4.1 Simple Flags
These produce completion lists made up by the shell itself:
-f Filenames and le system paths.
-/ Just le system paths.
Chapter 21: Completion Using compctl 257
-c Command names, including aliases, shell functions, builtins and reserved words.
-F Function names.
-B Names of builtin commands.
-m Names of external commands.
-w Reserved words.
-a Alias names.
-R Names of regular (non-global) aliases.
-G Names of global aliases.
-d This can be combined with -F, -B, -w, -a, -R and -G to get names of disabled
functions, builtins, reserved words or aliases.
-e This option (to show enabled commands) is in eect by default, but may be combined
with -d; -de in combination with -F, -B, -w, -a, -R and -G will complete names of
functions, builtins, reserved words or aliases whether or not they are disabled.
-o Names of shell options (see Chapter 16 [Options], page 88).
-v Names of any variable dened in the shell.
-N Names of scalar (non-array) parameters.
-A Array names.
-I Names of integer variables.
-O Names of read-only variables.
-p Names of parameters used by the shell (including special parameters).
-Z Names of shell special parameters.
-E Names of environment variables.
-n Named directories.
-b Key binding names.
-j Job names: the rst word of the job leaders command line. This is useful with the
kill builtin.
-r Names of running jobs.
-z Names of suspended jobs.
-u User names.
21.4.2 Flags with Arguments
These have user supplied arguments to determine how the list of completions is to be made up:
-k array Names taken from the elements of $array (note that the $ does not appear on
the command line). Alternatively, the argument array itself may be a set of space-
or comma-separated values in parentheses, in which any delimiter may be escaped
with a backslash; in this case the argument should be quoted. For example,
compctl -k "(cputime filesize datasize stacksize
coredumpsize resident descriptors)" limit
Chapter 21: Completion Using compctl 258
-g globstring
The globstring is expanded using lename globbing; it should be quoted to protect
it from immediate expansion. The resulting lenames are taken as the possible com-
pletions. Use *(/) instead of */ for directories. The fignore special parameter
is not applied to the resulting les. More than one pattern may be given separated
by blanks. (Note that brace expansion is not part of globbing. Use the syntax
(either|or) to match alternatives.)
-s subststring
The subststring is split into words and these words are than expanded using all shell
expansion mechanisms (see Chapter 14 [Expansion], page 37). The resulting words
are taken as possible completions. The fignore special parameter is not applied to
the resulting les. Note that -g is faster for lenames.
-K function
Call the given function to get the completions. Unless the name starts with an
underscore, the function is passed two arguments: the prex and the sux of the
word on which completion is to be attempted, in other words those characters be-
fore the cursor position, and those from the cursor position onwards. The whole
command line can be accessed with the -c and -l ags of the read builtin. The
function should set the variable reply to an array containing the completions (one
completion per element); note that reply should not be made local to the function.
From such a function the command line can be accessed with the -c and -l ags
to the read builtin. For example,
function whoson { reply=(users); }
compctl -K whoson talk
completes only logged-on users after talk. Note that whoson must return an
array, so reply=users would be incorrect.
-H num pattern
The possible completions are taken from the last num history lines. Only words
matching pattern are taken. If num is zero or negative the whole history is searched
and if pattern is the empty string all words are taken (as with *). A typical use is
compctl -D -f + -H 0
which forces completion to look back in the history list for a word if no lename
matches.
21.4.3 Control Flags
These do not directly specify types of name to be completed, but manipulate the options that
do:
-Q This instructs the shell not to quote any metacharacters in the possible completions.
Normally the results of a completion are inserted into the command line with any
metacharacters quoted so that they are interpreted as normal characters. This is
appropriate for lenames and ordinary strings. However, for special eects, such as
inserting a backquoted expression from a completion array (-k) so that the expres-
sion will not be evaluated until the complete line is executed, this option must be
used.
-P prex The prex is inserted just before the completed string; any initial part already
typed will be completed and the whole prex ignored for completion purposes. For
example,
compctl -j -P "%" kill
inserts a % after the kill command and then completes job names.
Chapter 21: Completion Using compctl 259
-S sux When a completion is found the sux is inserted after the completed string. In the
case of menu completion the sux is inserted immediately, but it is still possible to
cycle through the list of completions by repeatedly hitting the same key.
-W le-prex
With directory le-prex: for command, le, directory and globbing completion
(options -c, -f, -/, -g), the le prex is implicitly added in front of the completion.
For example,
compctl -/ -W ~/Mail maildirs
completes any subdirectories to any depth beneath the directory ~/Mail, although
that prex does not appear on the command line. The le-prex may also be of the
form accepted by the -k ag, i.e. the name of an array or a literal list in parenthesis.
In this case all the directories in the list will be searched for possible completions.
-q If used with a sux as specied by the -S option, this causes the sux to be removed
if the next character typed is a blank or does not insert anything or if the sux
consists of only one character and the next character typed is the same character;
this the same rule used for the AUTO_REMOVE_SLASH option. The option is most
useful for list separators (comma, colon, etc.).
-l cmd This option restricts the range of command line words that are considered to be ar-
guments. If combined with one of the extended completion patterns p[...], r[...],
or R[...] (see Section 21.6 [Extended Completion], page 261 below) the range is
restricted to the range of arguments specied in the brackets. Completion is then
performed as if these had been given as arguments to the cmd supplied with the
option. If the cmd string is empty the rst word in the range is instead taken as
the command name, and command name completion performed on the rst word in
the range. For example,
compctl -x r[-exec,;] -l -- find
completes arguments between -exec and the following ; (or the end of the com-
mand line if there is no such string) as if they were a separate command line.
-h cmd Normally zsh completes quoted strings as a whole. With this option, completion can
be done separately on dierent parts of such strings. It works like the -l option but
makes the completion code work on the parts of the current word that are separated
by spaces. These parts are completed as if they were arguments to the given cmd.
If cmd is the empty string, the rst part is completed as a command name, as with
-l.
-U Use the whole list of possible completions, whether or not they actually match
the word on the command line. The word typed so far will be deleted. This is
most useful with a function (given by the -K option) which can examine the word
components passed to it (or via the read builtins -c and -l ags) and use its own
criteria to decide what matches. If there is no completion, the original word is
retained. Since the produced possible completions seldom have interesting common
prexes and suxes, menu completion is started immediately if AUTO_MENU is set
and this ag is used.
-y func-or-var
The list provided by func-or-var is displayed instead of the list of completions when-
ever a listing is required; the actual completions to be inserted are not aected. It
can be provided in two ways. Firstly, if func-or-var begins with a $ it denes a
variable, or if it begins with a left parenthesis a literal array, which contains the
list. A variable may have been set by a call to a function using the -K option. Oth-
erwise it contains the name of a function which will be executed to create the list.
Chapter 21: Completion Using compctl 260
The function will be passed as an argument list all matching completions, including
prexes and suxes expanded in full, and should set the array reply to the result.
In both cases, the display list will only be retrieved after a complete list of matches
has been created.
Note that the returned list does not have to correspond, even in length, to the
original set of matches, and may be passed as a scalar instead of an array. No
special formatting of characters is performed on the output in this case; in particular,
newlines are printed literally and if they appear output in columns is suppressed.
-X explanation
Print explanation when trying completion on the current set of options. A %n in
this string is replaced by the number of matches that were added for this explana-
tion string. The explanation only appears if completion was tried and there was
no unique match, or when listing completions. Explanation strings will be listed
together with the matches of the group specied together with the -X option (using
the -J or -V option). If the same explanation string is given to multiple -X options,
the string appears only once (for each group) and the number of matches shown for
the %n is the total number of all matches for each of these uses. In any case, the
explanation string will only be shown if there was at least one match added for the
explanation string.
The sequences %B, %b, %S, %s, %U, and %u specify output attributes (bold, standout,
and underline), %F, %f, %K, %k specify foreground and background colours, and
%{...%} can be used to include literal escape sequences as in prompts.
-Y explanation
Identical to -X, except that the explanation rst undergoes expansion following the
usual rules for strings in double quotes. The expansion will be carried out after any
functions are called for the -K or -y options, allowing them to set variables.
-t continue
The continue-string contains a character that species which set of completion ags
should be used next. It is useful:
(i) With -T, or when trying a list of pattern completions, when compctl would usu-
ally continue with ordinary processing after nding matches; this can be suppressed
with -tn.
(ii) With a list of alternatives separated by +, when compctl would normally stop
when one of the alternatives generates matches. It can be forced to consider the
next set of completions by adding -t+ to the ags of the alternative before the +.
(iii) In an extended completion list (see below), when compctl would normally
continue until a set of conditions succeeded, then use only the immediately following
ags. With -t-, compctl will continue trying extended completions after the next
-; with -tx it will attempt completion with the default ags, in other words those
before the -x.
-J name This gives the name of the group the matches should be placed in. Groups are
listed and sorted separately; likewise, menu completion will oer the matches in the
groups in the order in which the groups were dened. If no group name is explicitly
given, the matches are stored in a group named default. The rst time a group
name is encountered, a group with that name is created. After that all matches
with the same group name are stored in that group.
This can be useful with non-exclusive alternative completions. For example, in
compctl -f -J files -t+ + -v -J variables foo
Chapter 21: Completion Using compctl 261
both les and variables are possible completions, as the -t+ forces both sets of
alternatives before and after the + to be considered at once. Because of the -J
options, however, all les are listed before all variables.
-V name Like -J, but matches within the group will not be sorted in listings nor in menu
completion. These unsorted groups are in a dierent name space from the sorted
ones, so groups dened as -J files and -V files are distinct.
-1 If given together with the -V option, makes only consecutive duplicates in the group
be removed. Note that groups with and without this ag are in dierent name
spaces.
-2 If given together with the -J or -V option, makes all duplicates be kept. Again,
groups with and without this ag are in dierent name spaces.
-M match-spec
This denes additional matching control specications that should be used only
when testing words for the list of ags this ag appears in. The format of the match-
spec string is described in Section 19.5 [Completion Matching Control], page 187.
21.5 Alternative Completion
compctl [ -CDT ] options + options [ + ... ] [ + ] command ...
The form with + species alternative options. Completion is tried with the options before the
rst +. If this produces no matches completion is tried with the ags after the + and so on.
If there are no ags after the last + and a match has not been found up to that point, default
completion is tried. If the list of ags contains a -t with a + character, the next list of ags is
used even if the current list produced matches.
Additional options are available that restrict completion to some part of the command line; this
is referred to as extended completion.
21.6 Extended Completion
compctl [ -CDT ] options -x pattern options - ... --
[ command ... ]
compctl [ -CDT ] options [ -x pattern options - ... -- ]
[ + options [ -x ... -- ] ... [+] ] [ command ... ]
The form with -x species extended completion for the commands given; as shown, it may be
combined with alternative completion using +. Each pattern is examined in turn; when a match
is found, the corresponding options, as described in Section 21.4 [Option Flags], page 256 above,
are used to generate possible completions. If no pattern matches, the options given before the
-x are used.
Note that each pattern should be supplied as a single argument and should be quoted to prevent
expansion of metacharacters by the shell.
A pattern is built of sub-patterns separated by commas; it matches if at least one of these
sub-patterns matches (they are ored). These sub-patterns are in turn composed of other sub-
patterns separated by white spaces which match if all of the sub-patterns match (they are
anded). An element of the sub-patterns is of the form c[...][...], where the pairs of brackets
may be repeated as often as necessary, and matches if any of the sets of brackets match (an
or). The example below makes this clearer.
The elements may be any of the following:
Chapter 21: Completion Using compctl 262
s[string]...
Matches if the current word on the command line starts with one of the strings given
in brackets. The string is not removed and is not part of the completion.
S[string]...
Like s[string] except that the string is part of the completion.
p[from,to]...
Matches if the number of the current word is between one of the from and to pairs
inclusive. The comma and to are optional; to defaults to the same value as from.
The numbers may be negative: -n refers to the nth last word on the line.
c[oset,string]...
Matches if the string matches the word oset by oset from the current word posi-
tion. Usually oset will be negative.
C[oset,pattern]...
Like c but using pattern matching instead.
w[index,string]...
Matches if the word in position index is equal to the corresponding string. Note
that the word count is made after any alias expansion.
W[index,pattern]...
Like w but using pattern matching instead.
n[index,string]...
Matches if the current word contains string. Anything up to and including the
indexth occurrence of this string will not be considered part of the completion, but
the rest will. index may be negative to count from the end: in most cases, index
will be 1 or -1. For example,
compctl -s users -x n[1,@] -k hosts -- talk
will usually complete usernames, but if you insert an @ after the name, names from
the array hosts (assumed to contain hostnames, though you must make the array
yourself) will be completed. Other commands such as rcp can be handled similarly.
N[index,string]...
Like n except that the string will be taken as a character class. Anything up to
and including the indexth occurrence of any of the characters in string will not be
considered part of the completion.
m[min,max]...
Matches if the total number of words lies between min and max inclusive.
r[str1,str2]...
Matches if the cursor is after a word with prex str1. If there is also a word with
prex str2 on the command line after the one matched by str1 it matches only if
the cursor is before this word. If the comma and str2 are omitted, it matches if the
cursor is after a word with prex str1.
R[str1,str2]...
Like r but using pattern matching instead.
q[str]... Matches the word currently being completed is in single quotes and the str begins
with the letter s, or if completion is done in double quotes and str starts with the
letter d, or if completion is done in backticks and str starts with a b.
Chapter 22: Zsh Modules 263
21.7 Example
compctl -u -x s[+] c[-1,-f],s[-f+] \
-g ~/Mail/*(:t) - s[-f],c[-1,-f] -f -- mail
This is to be interpreted as follows:
If the current command is mail, then
if ((the current word begins with + and the previous word is -f) or (the current word
begins with -f+)), then complete the non-directory part (the :t glob modier) of
les in the directory ~/Mail; else
if the current word begins with -f or the previous word was -f, then complete any
le; else
complete user names.
22 Zsh Modules
22.1 Description
Some optional parts of zsh are in modules, separate from the core of the shell. Each of these
modules may be linked in to the shell at build time, or can be dynamically linked while the
shell is running if the installation supports this feature. Modules are linked at runtime with the
zmodload command, see Chapter 17 [Shell Builtin Commands], page 111.
The modules that are bundled with the zsh distribution are:
zsh/attr Builtins for manipulating extended attributes (xattr).
zsh/cap Builtins for manipulating POSIX.1e (POSIX.6) capability (privilege) sets.
zsh/clone
A builtin that can clone a running shell onto another terminal.
zsh/compctl
The compctl builtin for controlling completion.
zsh/complete
The basic completion code.
zsh/complist
Completion listing extensions.
zsh/computil
A module with utility builtins needed for the shell function based completion system.
zsh/curses
curses windowing commands
zsh/datetime
Some date/time commands and parameters.
zsh/deltochar
A ZLE function duplicating EMACS zap-to-char.
zsh/example
An example of how to write a module.
zsh/files
Some basic le manipulation commands as builtins.
Chapter 22: Zsh Modules 264
zsh/langinfo
Interface to locale information.
zsh/mapfile
Access to external les via a special associative array.
zsh/mathfunc
Standard scientic functions for use in mathematical evaluations.
zsh/newuser
Arrange for les for new users to be installed.
zsh/parameter
Access to internal hash tables via special associative arrays.
zsh/pcre Interface to the PCRE library.
zsh/regex
Interface to the POSIX regex library.
zsh/sched
A builtin that provides a timed execution facility within the shell.
zsh/net/socket
Manipulation of Unix domain sockets
zsh/stat A builtin command interface to the stat system call.
zsh/system
A builtin interface to various low-level system features.
zsh/net/tcp
Manipulation of TCP sockets
zsh/termcap
Interface to the termcap database.
zsh/terminfo
Interface to the terminfo database.
zsh/zftp A builtin FTP client.
zsh/zle The Zsh Line Editor, including the bindkey and vared builtins.
zsh/zleparameter
Access to internals of the Zsh Line Editor via parameters.
zsh/zprof
A module allowing proling for shell functions.
zsh/zpty A builtin for starting a command in a pseudo-terminal.
zsh/zselect
Block and return when le descriptors are ready.
zsh/zutil
Some utility builtins, e.g. the one for supporting conguration via styles.
Chapter 22: Zsh Modules 265
22.2 The zsh/attr Module
The zsh/attr module is used for manipulating extended attributes. The -h option causes
all commands to operate on symbolic links instead of their targets. The builtins in this module
are:
zgetattr [ -h ] lename attribute [ parameter ]
Get the extended attribute attribute from the specied lename. If the optional
argument parameter is given, the attribute is set on that parameter instead of
being printed to stdout.
zsetattr [ -h ] lename attribute value
Set the extended attribute attribute on the specied lename to value.
zdelattr [ -h ] lename attribute
Remove the extended attribute attribute from the specied lename.
zlistattr [ -h ] lename [ parameter ]
List the extended attributes currently set on the specied lename. If the optional
argument parameter is given, the list of attributes is set on that parameter instead
of being printed to stdout.
zgetattr and zlistattr allocate memory dynamically. If the attribute or list of attributes
grows between the allocation and the call to get them, they return 2. On all other errors, 1 is
returned. This allows the calling function to check for this case and retry.
22.3 The zsh/cap Module
The zsh/cap module is used for manipulating POSIX.1e (POSIX.6) capability sets. If the
operating system does not support this interface, the builtins dened by this module will do
nothing. The builtins in this module are:
cap [ capabilities ]
Change the shells process capability sets to the specied capabilities, otherwise
display the shells current capabilities.
getcap lename ...
This is a built-in implementation of the POSIX standard utility. It displays the
capability sets on each specied lename.
setcap capabilities lename ...
This is a built-in implementation of the POSIX standard utility. It sets the capability
sets on each specied lename to the specied capabilities.
22.4 The zsh/clone Module
The zsh/clone module makes available one builtin command:
clone tty Creates a forked instance of the current shell, attached to the specied tty. In the
new shell, the PID, PPID and TTY special parameters are changed appropriately. $!
is set to zero in the new shell, and to the new shells PID in the original shell.
The return status of the builtin is zero in both shells if successful, and non-zero on
error.
The target of clone should be an unused terminal, such as an unused virtual console
or a virtual terminal created by
xterm -e sh -c trap : INT QUIT TSTP; tty; while :; do sleep 100000000; done
Chapter 22: Zsh Modules 266
Some words of explanation are warranted about this long xterm command line:
when doing clone on a pseudo-terminal, some other session ("session" meant as a
unix session group, or SID) is already owning the terminal. Hence the cloned zsh
cannot acquire the pseudo-terminal as a controlling tty. That means two things:
the job control signals will go to the sh-started-by-xterm process group (thats why
we disable INT QUIT and TSTP with trap; otherwise the while loop could get
suspended or killed)
the cloned shell will have job control disabled, and the job control keys (control-C,
control-\ and control-Z) will not work.
This does not apply when cloning to an unused vc.
Cloning to a used (and unprepared) terminal will result in two processes reading
simultaneously from the same terminal, with input bytes going randomly to either
process.
clone is mostly useful as a shell built-in replacement for openvt.
22.5 The zsh/compctl Module
The zsh/compctl module makes available two builtin commands. compctl, is the old, depre-
cated way to control completions for ZLE. See Chapter 21 [Completion Using compctl], page 254.
The other builtin command, compcall can be used in user-dened completion widgets, see
Chapter 19 [Completion Widgets], page 176.
22.6 The zsh/complete Module
The zsh/complete module makes available several builtin commands which can be used in
user-dened completion widgets, see Chapter 19 [Completion Widgets], page 176.
22.7 The zsh/complist Module
The zsh/complist module oers three extensions to completion listings: the ability to high-
light matches in such a list, the ability to scroll through long lists and a dierent style of menu
completion.
22.7.1 Colored completion listings
Whenever one of the parameters ZLS_COLORS or ZLS_COLOURS is set and the zsh/complist
module is loaded or linked into the shell, completion lists will be colored. Note, however, that
complist will not automatically be loaded if it is not linked in: on systems with dynamic
loading, zmodload zsh/complist is required.
The parameters ZLS_COLORS and ZLS_COLOURS describe how matches are highlighted. To turn
on highlighting an empty value suces, in which case all the default values given below will be
used. The format of the value of these parameters is the same as used by the GNU version of
the ls command: a colon-separated list of specications of the form name=value. The name
may be one of the following strings, most of which specify le types for which the value will be
used. The strings and their default values are:
no 0 for normal text (i.e. when displaying something other than a matched le)
fi 0 for regular les
di 32 for directories
ln 36 for symbolic links. If this has the special value target, symbolic links are derefer-
enced and the target le used to determine the display format.
Chapter 22: Zsh Modules 267
pi 31 for named pipes (FIFOs)
so 33 for sockets
bd 44;37 for block devices
cd 44;37 for character devices
or none for a symlink to nonexistent le (default is the value dened for ln)
mi none for a non-existent le (default is the value dened for fi); this code is currently not
used
su 37;41 for les with setuid bit set
sg 30;43 for les with setgid bit set
tw 30;42 for world writable directories with sticky bit set
ow 34;43 for world writable directories without sticky bit set
sa none for les with an associated sux alias; this is only tested after specic suxes, as
described below
st 37;44 for directories with sticky bit set but not world writable
ex 35 for executable les
lc \e[ for the left code (see below)
rc m for the right code
tc 0 for the character indicating the le type printed after lenames if the LIST_TYPES
option is set
sp 0 for the spaces printed after matches to align the next column
ec none for the end code
Apart from these strings, the name may also be an asterisk (*) followed by any string. The
value given for such a string will be used for all les whose name ends with the string. The name
may also be an equals sign (=) followed by a pattern; the EXTENDED_GLOB option will be turned
on for evaluation of the pattern. The value given for this pattern will be used for all matches
(not just lenames) whose display string are matched by the pattern. Denitions for the form
with the leading equal sign take precedence over the values dened for le types, which in turn
take precedence over the form with the leading asterisk (le extensions).
The leading-equals form also allows dierent parts of the displayed strings to be colored dier-
ently. For this, the pattern has to use the (#b) globbing ag and pairs of parentheses surround-
ing the parts of the strings that are to be colored dierently. In this case the value may consist
of more than one color code separated by equal signs. The rst code will be used for all parts
for which no explicit code is specied and the following codes will be used for the parts matched
by the sub-patterns in parentheses. For example, the specication =(#b)(?)*(?)=0=3=7 will
be used for all matches which are at least two characters long and will use the code 3 for the
rst character, 7 for the last character and 0 for the rest.
All three forms of name may be preceded by a pattern in parentheses. If this is given, the
value will be used only for matches in groups whose names are matched by the pattern given in
the parentheses. For example, (g*)m*=43 highlights all matches beginning with m in groups
whose names begin with g using the color code 43. In case of the lc, rc, and ec codes,
the group pattern is ignored.
Note also that all patterns are tried in the order in which they appear in the parameter value
until the rst one matches which is then used.
Chapter 22: Zsh Modules 268
When printing a match, the code prints the value of lc, the value for the le-type or the last
matching specication with a *, the value of rc, the string to display for the match itself, and
then the value of ec if that is dened or the values of lc, no, and rc if ec is not dened.
The default values are ISO 6429 (ANSI) compliant and can be used on vt100 compatible ter-
minals such as xterms. On monochrome terminals the default values will have no visible eect.
The colors function from the contribution can be used to get associative arrays containing the
codes for ANSI terminals (see Section 26.11 [Other Functions], page 387). For example, after
loading colors, one could use $colors[red] to get the code for foreground color red and
$colors[bg-green] for the code for background color green.
If the completion system invoked by compinit is used, these parameters should not be set directly
because the system controls them itself. Instead, the list-colors style should be used (see
Section 20.3 [Completion System Conguration], page 197).
22.7.2 Scrolling in completion listings
To enable scrolling through a completion list, the LISTPROMPT parameter must be set. Its value
will be used as the prompt; if it is the empty string, a default prompt will be used. The value
may contain escapes of the form %x. It supports the escapes %B, %b, %S, %s, %U, %u,
%F, %f, %K, %k and %{...%} used also in shell prompts as well as three pairs of additional
sequences: a %l or %L is replaced by the number of the last line shown and the total number
of lines in the form number/total; a %m or %M is replaced with the number of the last match
shown and the total number of matches; and %p or %P is replaced with Top, Bottom or the
position of the rst line shown in percent of the total number of lines, respectively. In each
of these cases the form with the uppercase letter will be replaced with a string of xed width,
padded to the right with spaces, while the lowercase form will not be padded.
If the parameter LISTPROMPT is set, the completion code will not ask if the list should be shown.
Instead it immediately starts displaying the list, stopping after the rst screenful, showing the
prompt at the bottom, waiting for a keypress after temporarily switching to the listscroll
keymap. Some of the zle functions have a special meaning while scrolling lists:
send-break
stops listing discarding the key pressed
accept-line, down-history, down-line-or-history
down-line-or-search, vi-down-line-or-history
scrolls forward one line
complete-word, menu-complete, expand-or-complete
expand-or-complete-prefix, menu-complete-or-expand
scrolls forward one screenful
accept-search
stop listing but take no other action
Every other character stops listing and immediately processes the key as usual. Any key that is
not bound in the listscroll keymap or that is bound to undefined-key is looked up in the
keymap currently selected.
As for the ZLS_COLORS and ZLS_COLOURS parameters, LISTPROMPT should not be set directly
when using the shell function based completion system. Instead, the list-prompt style should
be used.
22.7.3 Menu selection
The zsh/complist module also oers an alternative style of selecting matches from a list, called
menu selection, which can be used if the shell is set up to return to the last prompt after showing
a completion list (see the ALWAYS_LAST_PROMPT option in Chapter 16 [Options], page 88).
Chapter 22: Zsh Modules 269
Menu selection can be invoked directly by the widget menu-select dened by this module. This
is a standard ZLE widget that can be bound to a key in the usual way as described in Chapter 18
[Zsh Line Editor], page 144.
Alternatively, the parameter MENUSELECT can be set to an integer, which gives the minimum
number of matches that must be present before menu selection is automatically turned on.
This second method requires that menu completion be started, either directly from a widget
such as menu-complete, or due to one of the options MENU_COMPLETE or AUTO_MENU being set.
If MENUSELECT is set, but is 0, 1 or empty, menu selection will always be started during an
ambiguous menu completion.
When using the completion system based on shell functions, the MENUSELECT parameter should
not be used (like the ZLS_COLORS and ZLS_COLOURS parameters described above). Instead, the
menu style should be used with the select=... keyword.
After menu selection is started, the matches will be listed. If there are more matches than t
on the screen, only the rst screenful is shown. The matches to insert into the command line
can be selected from this list. In the list one match is highlighted using the value for ma from
the ZLS_COLORS or ZLS_COLOURS parameter. The default value for this is 7 which forces the
selected match to be highlighted using standout mode on a vt100-compatible terminal. If neither
ZLS_COLORS nor ZLS_COLOURS is set, the same terminal control sequence as for the %S escape
in prompts is used.
If there are more matches than t on the screen and the parameter MENUPROMPT is set, its value
will be shown below the matches. It supports the same escape sequences as LISTPROMPT, but
the number of the match or line shown will be that of the one where the mark is placed. If its
value is the empty string, a default prompt will be used.
The MENUSCROLL parameter can be used to specify how the list is scrolled. If the parameter is
unset, this is done line by line, if it is set to 0 (zero), the list will scroll half the number of lines
of the screen. If the value is positive, it gives the number of lines to scroll and if it is negative,
the list will be scrolled the number of lines of the screen minus the (absolute) value.
As for the ZLS_COLORS, ZLS_COLOURS and LISTPROMPT parameters, neither MENUPROMPT nor
MENUSCROLL should be set directly when using the shell function based completion system.
Instead, the select-prompt and select-scroll styles should be used.
The completion code sometimes decides not to show all of the matches in the list. These hidden
matches are either matches for which the completion function which added them explicitly
requested that they not appear in the list (using the -n option of the compadd builtin command)
or they are matches which duplicate a string already in the list (because they dier only in things
like prexes or suxes that are not displayed). In the list used for menu selection, however,
even these matches are shown so that it is possible to select them. To highlight such matches
the hi and du capabilities in the ZLS_COLORS and ZLS_COLOURS parameters are supported for
hidden matches of the rst and second kind, respectively.
Selecting matches is done by moving the mark around using the zle movement functions. When
not all matches can be shown on the screen at the same time, the list will scroll up and down
when crossing the top or bottom line. The following zle functions have special meaning during
menu selection. Note that the following always perform the same task within the menu selection
map and cannot be replaced by user dened widgets, nor can the set of functions be extended:
accept-line, accept-search
accept the current match and leave menu selection (but do not cause the command
line to be accepted)
send-break
leaves menu selection and restores the previous contents of the command line
Chapter 22: Zsh Modules 270
redisplay, clear-screen
execute their normal function without leaving menu selection
accept-and-hold, accept-and-menu-complete
accept the currently inserted match and continue selection allowing to select the
next match to insert into the line
accept-and-infer-next-history
accepts the current match and then tries completion with menu selection again; in
the case of les this allows one to select a directory and immediately attempt to
complete les in it; if there are no matches, a message is shown and one can use
undo to go back to completion on the previous level, every other key leaves menu
selection (including the other zle functions which are otherwise special during menu
selection)
undo removes matches inserted during the menu selection by one of the three functions
before
down-history, down-line-or-history
vi-down-line-or-history, down-line-or-search
moves the mark one line down
up-history, up-line-or-history
vi-up-line-or-history, up-line-or-search
moves the mark one line up
forward-char, vi-forward-char
moves the mark one column right
backward-char, vi-backward-char
moves the mark one column left
forward-word, vi-forward-word
vi-forward-word-end, emacs-forward-word
moves the mark one screenful down
backward-word, vi-backward-word, emacs-backward-word
moves the mark one screenful up
vi-forward-blank-word, vi-forward-blank-word-end
moves the mark to the rst line of the next group of matches
vi-backward-blank-word
moves the mark to the last line of the previous group of matches
beginning-of-history
moves the mark to the rst line
end-of-history
moves the mark to the last line
beginning-of-buffer-or-history, beginning-of-line
beginning-of-line-hist, vi-beginning-of-line
moves the mark to the leftmost column
end-of-buffer-or-history, end-of-line
end-of-line-hist, vi-end-of-line
moves the mark to the rightmost column
complete-word, menu-complete, expand-or-complete
expand-or-complete-prefix, menu-expand-or-complete
moves the mark to the next match
Chapter 22: Zsh Modules 271
reverse-menu-complete
moves the mark to the previous match
vi-insert
this toggles between normal and interactive mode; in interactive mode the keys
bound to self-insert and self-insert-unmeta insert into the command line as
in normal editing mode but without leaving menu selection; after each character
completion is tried again and the list changes to contain only the new matches;
the completion widgets make the longest unambiguous string be inserted in the
command line and undo and backward-delete-char go back to the previous set of
matches
history-incremental-search-forward
history-incremental-search-backward
this starts incremental searches in the list of completions displayed; in this mode,
accept-line only leaves incremental search, going back to the normal menu selec-
tion mode
All movement functions wrap around at the edges; any other zle function not listed leaves menu
selection and executes that function. It is possible to make widgets in the above list do the same
by using the form of the widget with a . in front. For example, the widget .accept-line
has the eect of leaving menu selection and accepting the entire command line.
During this selection the widget uses the keymap menuselect. Any key that is not dened in
this keymap or that is bound to undefined-key is looked up in the keymap currently selected.
This is used to ensure that the most important keys used during selection (namely the cursor
keys, return, and TAB) have sensible defaults. However, keys in the menuselect keymap can be
modied directly using the bindkey builtin command (see Section 22.29 [The zsh/zle Module],
page 301). For example, to make the return key leave menu selection without accepting the
match currently selected one could call
bindkey -M menuselect ^M send-break
after loading the zsh/complist module.
22.8 The zsh/computil Module
The zsh/computil module adds several builtin commands that are used by some of the
completion functions in the completion system based on shell functions (see Chapter 20 [Com-
pletion System], page 191 ). Except for compquote these builtin commands are very specialised
and thus not very interesting when writing your own completion functions. In summary, these
builtin commands are:
comparguments
This is used by the _arguments function to do the argument and command line
parsing. Like compdescribe it has an option -i to do the parsing and initialize
some internal state and various options to access the state information to decide
what should be completed.
compdescribe
This is used by the _describe function to build the displays for the matches and
to get the strings to add as matches with their options. On the rst call one of the
options -i or -I should be supplied as the rst argument. In the rst case, display
strings without the descriptions will be generated, in the second case, the string
used to separate the matches from their descriptions must be given as the second
argument and the descriptions (if any) will be shown. All other arguments are like
the denition arguments to _describe itself.
Chapter 22: Zsh Modules 272
Once compdescribe has been called with either the -i or the -I option, it can be
repeatedly called with the -g option and the names of ve arrays as its arguments.
This will step through the dierent sets of matches and store the options in the rst
array, the strings with descriptions in the second, the matches for these in the third,
the strings without descriptions in the fourth, and the matches for them in the fth
array. These are then directly given to compadd to register the matches with the
completion code.
compfiles
Used by the _path_files function to optimize complex recursive lename gener-
ation (globbing). It does three things. With the -p and -P options it builds the
glob patterns to use, including the paths already handled and trying to optimize the
patterns with respect to the prex and sux from the line and the match specica-
tion currently used. The -i option does the directory tests for the ignore-parents
style and the -r option tests if a component for some of the matches are equal to
the string on the line and removes all other matches if that is true.
compgroups
Used by the _tags function to implement the internals of the group-order style.
This only takes its arguments as names of completion groups and creates the groups
for it (all six types: sorted and unsorted, both without removing duplicates, with
removing all duplicates and with removing consecutive duplicates).
compquote [ -p ] names ...
There may be reasons to write completion functions that have to add the matches
using the -Q option to compadd and perform quoting themselves. Instead of in-
terpreting the rst character of the all_quotes key of the compstate special as-
sociation and using the q ag for parameter expansions, one can use this builtin
command. The arguments are the names of scalar or array parameters and the
values of these parameters are quoted as needed for the innermost quoting level. If
the -p option is given, quoting is done as if there is some prex before the values of
the parameters, so that a leading equal sign will not be quoted.
The return status is non-zero in case of an error and zero otherwise.
comptags
comptry These implement the internals of the tags mechanism.
compvalues
Like comparguments, but for the _values function.
22.9 The zsh/curses Module
The zsh/curses module makes available one builtin command and various parameters.
Chapter 22: Zsh Modules 273
22.9.1 Builtin
zcurses init
zcurses end
zcurses addwin targetwin nlines ncols begin y begin x [ parentwin ]
zcurses delwin targetwin
zcurses refresh [ targetwin ... ]
zcurses touch targetwin ...
zcurses move targetwin new y new x
zcurses clear targetwin [ redraw | eol | bot ]
zcurses position targetwin array
zcurses char targetwin character
zcurses string targetwin string
zcurses border targetwin border
zcurses attr targetwin [ {+/-}attribute | fg col/bg col ] [...]
zcurses bg targetwin [ {+/-}attribute | fg col/bg col | @char ] [...]
zcurses scroll targetwin [ on | off | {+/-}lines ]
zcurses input targetwin [ param [ kparam [ mparam ] ] ]
zcurses mouse [ delay num | {+/-}motion ]
zcurses timeout targetwin intval
zcurses querychar targetwin [ param ]
Manipulate curses windows. All uses of this command should be bracketed by
zcurses init to initialise use of curses, and zcurses end to end it; omitting
zcurses end can cause the terminal to be in an unwanted state.
The subcommand addwin creates a window with nlines lines and ncols columns. Its
upper left corner will be placed at row begin y and column begin x of the screen.
targetwin is a string and refers to the name of a window that is not currently
assigned. Note in particular the curses convention that vertical values appear before
horizontal values.
If addwin is given an existing window as the nal argument, the new window is
created as a subwindow of parentwin. This diers from an ordinary new window
in that the memory of the window contents is shared with the parents memory.
Subwindows must be deleted before their parent. Note that the coordinates of
subwindows are relative to the screen, not the parent, as with other windows.
Use the subcommand delwin to delete a window created with addwin. Note that
end does not implicitly delete windows, and that delwin does not erase the screen
image of the window.
The window corresponding to the full visible screen is called stdscr; it always exists
after zcurses init and cannot be delete with delwin.
The subcommand refresh will refresh window targetwin; this is necessary to make
any pending changes (such as characters you have prepared for output with char)
visible on the screen. refresh without an argument causes the screen to be cleared
and redrawn. If multiple windows are given, the screen is updated once at the end.
The subcommand touch marks the targetwins listed as changed. This is necessary
before refreshing windows if a window that was in front of another window (which
may be stdscr) is deleted.
The subcommand move moves the cursor position in targetwin to new coordinates
new y and new x. Note that the subcommand string (but not the subcommand
char) advances the cursor position over the characters added.
The subcommand clear erases the contents of targetwin. One (and no more than
one) of three options may be specied. With the option redraw, in addition the
Chapter 22: Zsh Modules 274
next refresh of targetwin will cause the screen to be cleared and repainted. With
the option eol, targetwin is only cleared to the end of the current cursor line. With
the option bot, targetwin is cleared to the end of the window, i.e everything to the
right and below the cursor is cleared.
The subcommand position writes various positions associated with targetwin into
the array named array. These are, in order:
- The y and x coordinates of the cursor relative to the top left of targetwin
- The y and x coordinates of the top left of targetwin on the screen
- The size of targetwin in y and x dimensions.
Outputting characters and strings are achieved by char and string respectively.
To draw a border around window targetwin, use border. Note that the border is
not subsequently handled specially: in other words, the border is simply a set of
characters output at the edge of the window. Hence it can be overwritten, can scroll
o the window, etc.
The subcommand attr will set targetwins attributes or foreground/background
color pair for any successive character output. Each attribute given on the line may
be prepended by a + to set or a - to unset that attribute; + is assumed if absent. The
attributes supported are blink, bold, dim, reverse, standout, and underline.
Each fg col/bg col attribute (to be read as fg col on bg col) sets the foreground
and background color for character output. The color default is sometimes avail-
able (in particular if the library is ncurses), specifying the foreground or background
color with which the terminal started. The color pair default/default is always
available.
bg overrides the color and other attributes of all characters in the window. Its
usual use is to set the background initially, but it will overwrite the attributes of
any characters at the time when it is called. In addition to the arguments allowed
with attr, an argument @char species a character to be shown in otherwise blank
areas of the window. Owing to limitations of curses this cannot be a multibyte
character (use of ASCII characters only is recommended). As the specied set of
attributes override the existing background, turning attributes o in the arguments
is not useful, though this does not cause an error.
The subcommand scroll can be used with on or off to enabled or disable scrolling
of a window when the cursor would otherwise move below the window due to typing
or output. It can also be used with a positive or negative integer to scroll the window
up or down the given number of lines without changing the current cursor position
(which therefore appears to move in the opposite direction relative to the window).
In the second case, if scrolling is off it is temporarily turned on to allow the window
to be scrolled.
The subcommand input reads a single character from the window without echoing
it back. If param is supplied the character is assigned to the parameter param, else
it is assigned to the parameter REPLY.
If both param and kparam are supplied, the key is read in keypad mode. In this
mode special keys such as function keys and arrow keys return the name of the key
in the parameter kparam. The key names are the macros dened in the curses.h or
ncurses.h with the prex KEY_ removed; see also the description of the parameter
zcurses_keycodes below. Other keys cause a value to be set in param as before.
On a successful return only one of param or kparam contains a non-empty string;
the other is set to an empty string.
Chapter 22: Zsh Modules 275
If mparam is also supplied, input attempts to handle mouse input. This is only
available with the ncurses library; mouse handling can be detected by checking for
the exit status of zcurses mouse with no arguments. If a mouse button is clicked
(or double- or triple-clicked, or pressed or released with a congurable delay from
being clicked) then kparam is set to the string MOUSE, and mparam is set to an array
consisting of the following elements:
- An identier to discriminate dierent input devices; this is only rarely
useful.
- The x, y and z coordinates of the mouse click relative to the full screen,
as three elements in that order (i.e. the y coordinate is, unusually, after
the x coordinate). The z coordinate is only available for a few unusual
input devices and is otherwise set to zero.
- Any events that occurred as separate items; usually there will
be just one. An event consists of PRESSED, RELEASED, CLICKED,
DOUBLE_CLICKED or TRIPLE_CLICKED followed immediately (in the
same element) by the number of the button.
- If the shift key was pressed, the string SHIFT.
- If the control key was pressed, the string CTRL.
- If the alt key was pressed, the string ALT.
Not all mouse events may be passed through to the terminal window; most terminal
emulators handle some mouse events themselves. Note that the ncurses manual
implies that using input both with and without mouse handling may cause the
mouse cursor to appear and disappear.
The subcommand mouse can be used to congure the use of the mouse. There is no
window argument; mouse options are global. zcurses mouse with no arguments
returns status 0 if mouse handling is possible, else status 1. Otherwise, the possible
arguments (which may be combined on the same command line) are as follows.
delay num sets the maximum delay in milliseconds between press and release events
to be considered as a click; the value 0 disables click resolution, and the default is
one sixth of a second. motion proceeded by an optional + (the default) or - turns
on or o reporting of mouse motion in addition to clicks, presses and releases, which
are always reported. However, it appears reports for mouse motion are not currently
implemented.
The subcommand timeout species a timeout value for input from targetwin. If
intval is negative, zcurses input waits indenitely for a character to be typed;
this is the default. If intval is zero, zcurses input returns immediately; if there
is typeahead it is returned, else no input is done and status 1 is returned. If intval
is positive, zcurses input waits intval milliseconds for input and if there is none
at the end of that period returns status 1.
The subcommand querychar queries the character at the current cursor position.
The return values are stored in the array named param if supplied, else in the array
reply. The rst value is the character (which may be a multibyte character if
the system supports them); the second is the color pair in the usual fg col/bg col
notation, or 0 if color is not supported. Any attributes other than color that apply
to the character, as set with the subcommand attr, appear as additional elements.
Chapter 22: Zsh Modules 276
22.9.2 Parameters
ZCURSES_COLORS
Readonly integer. The maximum number of colors the terminal supports. This value
is initialised by the curses library and is not available until the rst time zcurses
init is run.
ZCURSES_COLOR_PAIRS
Readonly integer. The maximum number of color pairs fg col/bg col that may be
dened in zcurses attr commands; note this limit applies to all color pairs that
have been used whether or not they are currently active. This value is initialised by
the curses library and is not available until the rst time zcurses init is run.
zcurses_attrs
Readonly array. The attributes supported by zsh/curses; available as soon as the
module is loaded.
zcurses_colors
Readonly array. The colors supported by zsh/curses; available as soon as the
module is loaded.
zcurses_keycodes
Readonly array. The values that may be returned in the second parameter supplied
to zcurses input in the order in which they are dened internally by curses. Not
all function keys are listed, only F0; curses reserves space for F0 up to F63.
zcurses_windows
Readonly array. The current list of windows, i.e. all windows that have been created
with zcurses addwin and not removed with zcurses delwin.
22.10 The zsh/datetime Module
The zsh/datetime module makes available one builtin command:
strftime [ -s scalar ] format epochtime
strftime -r [ -q ] [ -s scalar ] format timestring
Output the date denoted by epochtime in the format specied.
With the option -r (reverse), use the format format to parse the input string
timestring and output the number of seconds since the epoch at which the time
occurred. If no timezone is parsed, the current timezone is used; other parameters
are set to zero if not present. If timestring does not match format the command
returns status 1; it will additionally print an error message unless the option -q
(quiet) is given. If timestring matches format but not all characters in timestring
were used, the conversion succeeds; however, a warning is issued unless the option -q
is given. The matching is implemented by the system function strptime; see man
page strptime(3). This means that zsh format extensions are not available, however
for reverse lookup they are not required. If the function is not implemented, the
command returns status 2 and (unless -q is given) prints a message.
If -s scalar is given, assign the date string (or epoch time in seconds if -r is given)
to scalar instead of printing it.
The zsh/datetime module makes available several parameters; all are readonly:
EPOCHREALTIME
A oating point value representing the number of seconds since the epoch. The
notional accuracy is to nanoseconds if the clock_gettime call is available and to
Chapter 22: Zsh Modules 277
microseconds otherwise, but in practice the range of double precision oating point
and shell scheduling latencies may be signicant eects.
EPOCHSECONDS
An integer value representing the number of seconds since the epoch.
epochtime
An array value containing the number of seconds since the epoch in the rst element
and the remainder of the time since the epoch in nanoseconds in the second element.
To ensure the two elements are consistent the array should be copied or otherwise
referenced as a single substitution before the values are used. The following idiom
may be used:
for secs nsecs in $epochtime; do
...
done
22.11 The zsh/deltochar Module
The zsh/deltochar module makes available two ZLE functions:
delete-to-char
Read a character from the keyboard, and delete from the cursor position up to and
including the next (or, with repeat count n, the nth) instance of that character.
Negative repeat counts mean delete backwards.
zap-to-char
This behaves like delete-to-char, except that the nal occurrence of the character
itself is not deleted.
22.12 The zsh/example Module
The zsh/example module makes available one builtin command:
example [ -flags ] [ args ... ]
Displays the ags and arguments it is invoked with.
The purpose of the module is to serve as an example of how to write a module.
22.13 The zsh/les Module
The zsh/files module makes available some common commands for le manipulation as
builtins; these commands are probably not needed for many normal situations but can be useful
in emergency recovery situations with constrained resources. The commands do not implement
all features now required by relevant standards committees.
For all commands, a variant beginning zf_ is also available and loaded automatically. Using the
features capability of zmodload will let you load only those names you want.
The commands loaded by default are:
chgrp [ -hRs ] group lename ...
Changes group of les specied. This is equivalent to chown with a user-spec argu-
ment of :group.
chown [ -hRs ] user-spec lename ...
Changes ownership and group of les specied.
The user-spec can be in four forms:
user change owner to user; do not change group
Chapter 22: Zsh Modules 278
user:: change owner to user; do not change group
user: change owner to user; change group to users primary group
user:group
change owner to user; change group to group
:group do not change owner; change group to group
In each case, the : may instead be a .. The rule is that if there is a : then the
separator is :, otherwise if there is a . then the separator is ., otherwise there
is no separator.
Each of user and group may be either a username (or group name, as appropriate)
or a decimal user ID (group ID). Interpretation as a name takes precedence, if there
is an all-numeric username (or group name).
If the target is a symbolic link, the -h option causes chown to set the ownership of
the link instead of its target.
The -R option causes chown to recursively descend into directories, changing the
ownership of all les in the directory after changing the ownership of the directory
itself.
The -s option is a zsh extension to chown functionality. It enables paranoid be-
haviour, intended to avoid security problems involving a chown being tricked into
aecting les other than the ones intended. It will refuse to follow symbolic links,
so that (for example) chown luser /tmp/foo/passwd cant accidentally chown
/etc/passwd if /tmp/foo happens to be a link to /etc. It will also check where it
is after leaving directories, so that a recursive chown of a deep directory tree cant
end up recursively chowning /usr as a result of directories being moved up the tree.
ln [ -dfhins ] lename dest
ln [ -dfhins ] lename ... dir
Creates hard (or, with -s, symbolic) links. In the rst form, the specied destination
is created, as a link to the specied lename. In the second form, each of the
lenames is taken in turn, and linked to a pathname in the specied directory that
has the same last pathname component.
Normally, ln will not attempt to create hard links to directories. This check can be
overridden using the -d option. Typically only the super-user can actually succeed
in creating hard links to directories. This does not apply to symbolic links in any
case.
By default, existing les cannot be replaced by links. The -i option causes the user
to be queried about replacing existing les. The -f option causes existing les to
be silently deleted, without querying. -f takes precedence.
The -h and -n options are identical and both exist for compatibility; either one
indicates that if the target is a symlink then it should not be dereferenced. Typically
this is used in combination with -sf so that if an existing link points to a directory
then it will be removed, instead of followed. If this option is used with multiple
lenames and the target is a symbolic link pointing to a directory then the result is
an error.
mkdir [ -p ] [ -m mode ] dir ...
Creates directories. With the -p option, non-existing parent directories are rst
created if necessary, and there will be no complaint if the directory already exists.
The -m option can be used to specify (in octal) a set of le permissions for the
created directories, otherwise mode 777 modied by the current umask (see man
page umask(2)) is used.
Chapter 22: Zsh Modules 279
mv [ -fi ] lename dest
mv [ -fi ] lename ... dir
Moves les. In the rst form, the specied lename is moved to the specied
destination. In the second form, each of the lenames is taken in turn, and moved to
a pathname in the specied directory that has the same last pathname component.
By default, the user will be queried before replacing any le that the user cannot
write to, but writable les will be silently removed. The -i option causes the user
to be queried about replacing any existing les. The -f option causes any existing
les to be silently deleted, without querying. -f takes precedence.
Note that this mv will not move les across devices. Historical versions of mv, when
actual renaming is impossible, fall back on copying and removing les; if this be-
haviour is desired, use cp and rm manually. This may change in a future version.
rm [ -dfirs ] lename ...
Removes les and directories specied.
Normally, rm will not remove directories (except with the -r option). The -d option
causes rm to try removing directories with unlink (see man page unlink(2)), the
same method used for les. Typically only the super-user can actually succeed in
unlinking directories in this way. -d takes precedence over -r.
By default, the user will be queried before removing any le that the user cannot
write to, but writable les will be silently removed. The -i option causes the user to
be queried about removing any les. The -f option causes les to be silently deleted,
without querying, and suppresses all error indications. -f takes precedence.
The -r option causes rm to recursively descend into directories, deleting all les in
the directory before removing the directory with the rmdir system call (see man
page rmdir(2)).
The -s option is a zsh extension to rm functionality. It enables paranoid behaviour,
intended to avoid common security problems involving a root-run rm being tricked
into removing les other than the ones intended. It will refuse to follow sym-
bolic links, so that (for example) rm /tmp/foo/passwd cant accidentally remove
/etc/passwd if /tmp/foo happens to be a link to /etc. It will also check where it
is after leaving directories, so that a recursive removal of a deep directory tree cant
end up recursively removing /usr as a result of directories being moved up the tree.
rmdir dir ...
Removes empty directories specied.
sync Calls the system call of the same name (see man page sync(2)), which ushes dirty
buers to disk. It might return before the I/O has actually been completed.
22.14 The zsh/langinfo Module
The zsh/langinfo module makes available one parameter:
langinfo An associative array that maps langinfo elements to their values.
Your implementation may support a number of the following keys:
CODESET, D_T_FMT, D_FMT, T_FMT, RADIXCHAR, THOUSEP, YESEXPR, NOEXPR,
CRNCYSTR, ABDAY_{1..7}, DAY_{1..7}, ABMON_{1..12}, MON_{1..12},
T_FMT_AMPM, AM_STR, PM_STR, ERA, ERA_D_FMT, ERA_D_T_FMT, ERA_T_FMT,
ALT_DIGITS
Chapter 22: Zsh Modules 280
22.15 The zsh/maple Module
The zsh/mapfile module provides one special associative array parameter of the same name.
mapfile This associative array takes as keys the names of les; the resulting value is the
content of the le. The value is treated identically to any other text coming from
a parameter. The value may also be assigned to, in which case the le in question
is written (whether or not it originally existed); or an element may be unset, which
will delete the le in question. For example, vared mapfile[myfile] works as
expected, editing the le myfile.
When the array is accessed as a whole, the keys are the names of les in the current
directory, and the values are empty (to save a huge overhead in memory). Thus
${(k)mapfile} has the same aect as the glob operator *(D), since les begin-
ning with a dot are not special. Care must be taken with expressions such as rm
${(k)mapfile}, which will delete every le in the current directory without the
usual rm * test.
The parameter mapfile may be made read-only; in that case, les referenced may
not be written or deleted.
A le may conveniently be read into an array as one line per element with the form
array=("${(f@)mapfile[lename]}"). The double quotes and the @ are neces-
sary to prevent empty lines from being removed. Note that if the le ends with a
newline, the shell will split on the nal newline, generating an additional empty eld;
this can be suppressed by using array=("${(f@)${mapfile[lename]%$\n}}").
22.15.1 Limitations
Although reading and writing of the le in question is eciently handled, zshs internal memory
management may be arbitrarily baroque; however, mapfile is usually very much more ecient
than anything involving a loop. Note in particular that the whole contents of the le will always
reside physically in memory when accessed (possibly multiple times, due to standard parameter
substitution operations). In particular, this means handling of suciently long les (greater
than the machines swap space, or than the range of the pointer type) will be incorrect.
No errors are printed or agged for non-existent, unreadable, or unwritable les, as the parameter
mechanism is too low in the shell execution hierarchy to make this convenient.
It is unfortunate that the mechanism for loading modules does not yet allow the user to specify
the name of the shell parameter to be given the special behaviour.
22.16 The zsh/mathfunc Module
The zsh/mathfunc module provides standard mathematical functions for use when evaluating
mathematical formulae. The syntax agrees with normal C and FORTRAN conventions, for
example,
(( f = sin(0.3) ))
assigns the sine of 0.3 to the parameter f.
Most functions take oating point arguments and return a oating point value. However, any
necessary conversions from or to integer type will be performed automatically by the shell. Apart
from atan with a second argument and the abs, int and float functions, all functions behave
as noted in the manual page for the corresponding C function, except that any arguments out
of range for the function in question will be detected by the shell and an error reported.
The following functions take a single oating point argument: acos, acosh, asin, asinh, atan,
atanh, cbrt, ceil, cos, cosh, erf, erfc, exp, expm1, fabs, floor, gamma, j0, j1, lgamma, log,
Chapter 22: Zsh Modules 281
log10, log1p, logb, sin, sinh, sqrt, tan, tanh, y0, y1. The atan function can optionally take
a second argument, in which case it behaves like the C function atan2. The ilogb function
takes a single oating point argument, but returns an integer.
The function signgam takes no arguments, and returns an integer, which is the C variable of
the same name, as described in man page gamma(3). Note that it is therefore only useful
immediately after a call to gamma or lgamma. Note also that signgam() and signgam are
distinct expressions.
The following functions take two oating point arguments: copysign, fmod, hypot, nextafter.
The following take an integer rst argument and a oating point second argument: jn, yn.
The following take a oating point rst argument and an integer second argument: ldexp,
scalb.
The function abs does not convert the type of its single argument; it returns the absolute value
of either a oating point number or an integer. The functions float and int convert their
arguments into a oating point or integer value (by truncation) respectively.
Note that the C pow function is available in ordinary math evaluation as the ** operator and
is not provided here.
The function rand48 is available if your systems mathematical library has the function
erand48(3). It returns a pseudo-random oating point number between 0 and 1. It takes
a single string optional argument.
If the argument is not present, the random number seed is initialised by three calls to the rand(3)
function this produces the same random numbers as the next three values of $RANDOM.
If the argument is present, it gives the name of a scalar parameter where the current random
number seed will be stored. On the rst call, the value must contain at least twelve hexadecimal
digits (the remainder of the string is ignored), or the seed will be initialised in the same manner
as for a call to rand48 with no argument. Subsequent calls to rand48(param) will then maintain
the seed in the parameter param as a string of twelve hexadecimal digits, with no base signier.
The random number sequences for dierent parameters are completely independent, and are
also independent from that used by calls to rand48 with no argument.
For example, consider
print $(( rand48(seed) ))
print $(( rand48() ))
print $(( rand48(seed) ))
Assuming $seed does not exist, it will be initialised by the rst call. In the second call, the
default seed is initialised; note, however, that because of the properties of rand() there is
a correlation between the seeds used for the two initialisations, so for more secure uses, you
should generate your own 12-byte seed. The third call returns to the same sequence of random
numbers used in the rst call, unaected by the intervening rand48().
22.17 The zsh/newuser Module
The zsh/newuser module is loaded at boot if it is available, the RCS option is set, and the
PRIVILEGED option is not set (all three are true by default). This takes place immediately after
commands in the global zshenv le (typically /etc/zshenv), if any, have been executed. If the
module is not available it is silently ignored by the shell; the module may safely be removed
from $MODULE_PATH by the administrator if it is not required.
On loading, the module tests if any of the start-up les .zshenv, .zprofile, .zshrc or .zlogin
exist in the directory given by the environment variable ZDOTDIR, or the users home directory
if that is not set. The test is not performed and the module halts processing if the shell was in
an emulation mode (i.e. had been invoked as some other shell than zsh).
Chapter 22: Zsh Modules 282
If none of the start-up les were found, the module then looks for the le newuser rst
in a sitewide directory, usually the parent directory of the site-functions directory, and
if that is not found the module searches in a version-specic directory, usually the par-
ent of the functions directory containing version-specic functions. (These directories can
be congured when zsh is built using the --enable-site-scriptdir=dir and --enable-
scriptdir=dir ags to configure, respectively; the defaults are prex/share/zsh and pre-
x/share/zsh/$ZSH_VERSION where the default prex is /usr/local.)
If the le newuser is found, it is then sourced in the same manner as a start-up le. The le is
expected to contain code to install start-up les for the user, however any valid shell code will
be executed.
The zsh/newuser module is then unconditionally unloaded.
Note that it is possible to achieve exactly the same eect as the zsh/newuser module by adding
code to /etc/zshenv. The module exists simply to allow the shell to make arrangements for
new users without the need for intervention by package maintainers and system administrators.
The script supplied with the module invokes the shell function zsh-newuser-install. This
may be invoked directly by the user even if the zsh/newuser module is disabled. Note, however,
that if the module is not installed the function will not be installed either. The function is
documented in Section 26.10 [User Conguration Functions], page 386.
22.18 The zsh/parameter Module
The zsh/parameter module gives access to some of the internal hash tables used by the shell
by dening some special parameters.
options The keys for this associative array are the names of the options that can be set and
unset using the setopt and unsetopt builtins. The value of each key is either the
string on if the option is currently set, or the string off if the option is unset. Setting
a key to one of these strings is like setting or unsetting the option, respectively.
Unsetting a key in this array is like setting it to the value off.
commands This array gives access to the command hash table. The keys are the names of
external commands, the values are the pathnames of the les that would be executed
when the command would be invoked. Setting a key in this array denes a new entry
in this table in the same way as with the hash builtin. Unsetting a key as in unset
"commands[foo]" removes the entry for the given key from the command hash
table.
functions
This associative array maps names of enabled functions to their denitions. Setting
a key in it is like dening a function with the name given by the key and the body
given by the value. Unsetting a key removes the denition for the function named
by the key.
dis_functions
Like functions but for disabled functions.
builtins This associative array gives information about the builtin commands currently en-
abled. The keys are the names of the builtin commands and the values are either
undefined for builtin commands that will automatically be loaded from a module
if invoked or defined for builtin commands that are already loaded.
dis_builtins
Like builtins but for disabled builtin commands.
reswords This array contains the enabled reserved words.
Chapter 22: Zsh Modules 283
dis_reswords
Like reswords but for disabled reserved words.
patchars This array contains the enabled pattern characters.
dis_patchars
Like patchars but for disabled pattern characters.
aliases This maps the names of the regular aliases currently enabled to their expansions.
dis_aliases
Like aliases but for disabled regular aliases.
galiases Like aliases, but for global aliases.
dis_galiases
Like galiases but for disabled global aliases.
saliases Like raliases, but for sux aliases.
dis_saliases
Like saliases but for disabled sux aliases.
parameters
The keys in this associative array are the names of the parameters currently dened.
The values are strings describing the type of the parameter, in the same format used
by the t parameter ag, see Section 14.3 [Parameter Expansion], page 43 . Setting
or unsetting keys in this array is not possible.
modules An associative array giving information about modules. The keys are the names of
the modules loaded, registered to be autoloaded, or aliased. The value says which
state the named module is in and is one of the strings loaded, autoloaded, or
alias:name, where name is the name the module is aliased to.
Setting or unsetting keys in this array is not possible.
dirstack A normal array holding the elements of the directory stack. Note that the out-
put of the dirs builtin command includes one more directory, the current working
directory.
history This associative array maps history event numbers to the full history lines.
historywords
A special array containing the words stored in the history.
jobdirs This associative array maps job numbers to the directories from which the job was
started (which may not be the current directory of the job).
The keys of the associative arrays are usually valid job numbers, and these are the
values output with, for example, ${(k)jobdirs}. Non-numeric job references may
be used when looking up a value; for example, ${jobdirs[%+]} refers to the current
job.
jobtexts This associative array maps job numbers to the texts of the command lines that
were used to start the jobs.
Handling of the keys of the associative array is as described for jobdirs above.
jobstates
This associative array gives information about the states of the jobs currently
known. The keys are the job numbers and the values are strings of the form job-
state:mark:pid=state.... The job-state gives the state the whole job is currently
in, one of running, suspended, or done. The mark is + for the current job,
Chapter 22: Zsh Modules 284
- for the previous job and empty otherwise. This is followed by one pid=state
for every process in the job. The pids are, of course, the process IDs and the state
describes the state of that process.
Handling of the keys of the associative array is as described for jobdirs above.
nameddirs
This associative array maps the names of named directories to the pathnames they
stand for.
userdirs This associative array maps user names to the pathnames of their home directories.
usergroups
This associative array maps names of system groups of which the current user is a
member to the corresponding group identiers. The contents are the same as the
groups output by the id command.
funcfiletrace
This array contains the absolute line numbers and corresponding le names for
the point where the current function, sourced le, or (if EVAL_LINENO is set) eval
command was called. The array is of the same length as funcsourcetrace and
functrace, but diers from funcsourcetrace in that the line and le are the point
of call, not the point of denition, and diers from functrace in that all values are
absolute line numbers in les, rather than relative to the start of a function, if any.
funcsourcetrace
This array contains the le names and line numbers of the points where the functions,
sourced les, and (if EVAL_LINENO is set) eval commands currently being executed
were dened. The line number is the line where the function name or name ()
started. In the case of an autoloaded function the line number is reported as zero.
The format of each element is lename:lineno. For functions autoloaded from a le
in native zsh format, where only the body of the function occurs in the le, or for
les that have been executed by the source or . builtins, the trace information is
shown as lename:0, since the entire le is the denition.
Most users will be interested in the information in the funcfiletrace array instead.
funcstack
This array contains the names of the functions, sourced les, and (if EVAL_LINENO
is set) eval commands. currently being executed. The rst element is the name of
the function using the parameter.
functrace
This array contains the names and line numbers of the callers corresponding to the
functions currently being executed. The format of each element is name:lineno.
Callers are also shown for sourced les; the caller is the point where the source or
. command was executed.
22.19 The zsh/pcre Module
The zsh/pcre module makes some commands available as builtins:
pcre_compile [ -aimxs ] PCRE
Compiles a perl-compatible regular expression.
Option -a will force the pattern to be anchored. Option -i will compile a case-
insensitive pattern. Option -m will compile a multi-line pattern; that is, ^ and
$ will match newlines within the pattern. Option -x will compile an extended
pattern, wherein whitespace and # comments are ignored. Option -s makes the dot
metacharacter match all characters, including those that indicate newline.
Chapter 22: Zsh Modules 285
pcre_study
Studies the previously-compiled PCRE which may result in faster matching.
pcre_match [ -v var ] [ -a arr ] [ -n oset ] [ -b ] string
Returns successfully if string matches the previously-compiled PCRE.
Upon successful match, if the expression captures substrings within parentheses,
pcre_match will set the array $match to those substrings, unless the -a option is
given, in which case it will set the array arr. Similarly, the variable MATCH will
be set to the entire matched portion of the string, unless the -v option is given,
in which case the variable var will be set. No variables are altered if there is no
successful match. A -n option starts searching for a match from the byte oset
position in string. If the -b option is given, the variable ZPCRE OP will be set
to an oset pair string, representing the byte oset positions of the entire matched
portion within the string. For example, a ZPCRE OP set to "32 45" indicates that
the matched portion began on byte oset 32 and ended on byte oset 44. Here,
byte oset position 45 is the position directly after the matched portion. Keep in
mind that the byte position isnt necessarily the same as the character position when
UTF-8 characters are involved. Consequently, the byte oset positions are only to
be relied on in the context of using them for subsequent searches on string, using an
oset position as an argument to the -n option. This is mostly used to implement
the "nd all non-overlapping matches" functionality.
A simple example of "nd all non-overlapping matches":
string="The following zip codes: 78884 90210 99513"
pcre_compile -m "\d{5}"
accum=()
pcre_match -b -- $string
while [[ $? -eq 0 ]] do
b=($=ZPCRE_OP)
accum+=$MATCH
pcre_match -b -n $b[2] -- $string
done
print -l $accum
The zsh/pcre module makes available the following test condition:
expr -pcre-match pcre
Matches a string against a perl-compatible regular expression.
For example,
[[ "$text" -pcre-match ^d+$ ]] &&
print text variable contains only "ds".
If the REMATCH_PCRE option is set, the =~ operator is equivalent to -pcre-match, and
the NO_CASE_MATCH option may be used. Note that NO_CASE_MATCH never applies
to the pcre_match builtin, instead use the -i switch of pcre_compile.
22.20 The zsh/regex Module
The zsh/regex module makes available the following test condition:
Chapter 22: Zsh Modules 286
expr -regex-match regex
Matches a string against a POSIX extended regular expression. On successful match,
matched portion of the string will normally be placed in the MATCH variable. If there
are any capturing parentheses within the regex, then the match array variable will
contain those. If the match is not successful, then the variables will not be altered.
For example,
[[ alphabetical -regex-match ^a([^a]+)a([^a]+)a ]] &&
print -l $MATCH X $match
If the option REMATCH_PCRE is not set, then the =~ operator will automatically load
this module as needed and will invoke the -regex-match operator.
If BASH_REMATCH is set, then the array BASH_REMATCH will be set instead of MATCH
and match.
22.21 The zsh/sched Module
The zsh/sched module makes available one builtin command and one parameter.
sched [-o] [+]hh:mm[:ss] command ...
sched [-o] [+]seconds command ...
sched [ -item ]
Make an entry in the scheduled list of commands to execute. The time may be speci-
ed in either absolute or relative time, and either as hours, minutes and (optionally)
seconds separated by a colon, or seconds alone. An absolute number of seconds in-
dicates the time since the epoch (1970/01/01 00:00); this is useful in combination
with the features in the zsh/datetime module, see Section 22.10 [The zsh/datetime
Module], page 276.
With no arguments, prints the list of scheduled commands. If the scheduled com-
mand has the -o ag set, this is shown at the start of the command.
With the argument -item, removes the given item from the list. The numbering
of the list is continuous and entries are in time order, so the numbering can change
when entries are added or deleted.
Commands are executed either immediately before a prompt, or while the shells
line editor is waiting for input. In the latter case it is useful to be able to produce
output that does not interfere with the line being edited. Providing the option -o
causes the shell to clear the command line before the event and redraw it after-
wards. This should be used with any scheduled event that produces visible output
to the terminal; it is not needed, for example, with output that updates a terminal
emulators title bar.
The sched builtin is not made available by default when the shell starts in a mode
emulating another shell. It can be made available with the command zmodload -F
zsh/sched b:sched.
zsh_scheduled_events
A readonly array corresponding to the events scheduled by the sched builtin. The
indices of the array correspond to the numbers shown when sched is run with no
arguments (provided that the KSH_ARRAYS option is not set). The value of the array
consists of the scheduled time in seconds since the epoch (see The zsh/datetime
Module for facilities for using this number), followed by a colon, followed by any
options (which may be empty but will be preceded by a - otherwise), followed by
a colon, followed by the command to be executed.
Chapter 22: Zsh Modules 287
The sched builtin should be used for manipulating the events. Note that this will
have an immediate eect on the contents of the array, so that indices may become
invalid.
22.22 The zsh/net/socket Module
The zsh/net/socket module makes available one builtin command:
zsocket [ -altv ] [ -d fd ] [ args ]
zsocket is implemented as a builtin to allow full use of shell command line editing,
le I/O, and job control mechanisms.
22.22.1 Outbound Connections
zsocket [ -v ] [ -d fd ] lename
Open a new Unix domain connection to lename. The shell parameter REPLY will
be set to the le descriptor associated with that connection. Currently, only stream
connections are supported.
If -d is specied, its argument will be taken as the target le descriptor for the
connection.
In order to elicit more verbose output, use -v.
22.22.2 Inbound Connections
zsocket -l [ -v ] [ -d fd ] lename
zsocket -l will open a socket listening on lename. The shell parameter REPLY
will be set to the le descriptor associated with that listener.
If -d is specied, its argument will be taken as the target le descriptor for the
connection.
In order to elicit more verbose output, use -v.
zsocket -a [ -tv ] [ -d targetfd ] listenfd
zsocket -a will accept an incoming connection to the socket associated with lis-
tenfd. The shell parameter REPLY will be set to the le descriptor associated with
the inbound connection.
If -d is specied, its argument will be taken as the target le descriptor for the
connection.
If -t is specied, zsocket will return if no incoming connection is pending. Other-
wise it will wait for one.
In order to elicit more verbose output, use -v.
22.23 The zsh/stat Module
The zsh/stat module makes available one builtin command under two possible names:
zstat [ -gnNolLtTrs ] [ -f fd ] [ -H hash ] [ -A array ] [ -F fmt ] [ +element ] [ le ... ]
stat ... The command acts as a front end to the stat system call (see man page stat(2)).
The same command is provided with two names; as the name stat is often used by
an external command it is recommended that only the zstat form of the command
is used. This can be arranged by loading the module with the command zmodload
-F zsh/stat b:zstat.
Chapter 22: Zsh Modules 288
If the stat call fails, the appropriate system error message printed and status 1 is
returned. The elds of struct stat give information about the les provided as
arguments to the command. In addition to those available from the stat call, an
extra element link is provided. These elements are:
device The number of the device on which the le resides.
inode The unique number of the le on this device (inode number).
mode The mode of the le; that is, the les type and access permissions.
With the -s option, this will be returned as a string corresponding to
the rst column in the display of the ls -l command.
nlink The number of hard links to the le.
uid The user ID of the owner of the le. With the -s option, this is displayed
as a user name.
gid The group ID of the le. With the -s option, this is displayed as a
group name.
rdev The raw device number. This is only useful for special devices.
size The size of the le in bytes.
atime
mtime
ctime The last access, modication and inode change times of the le, respec-
tively, as the number of seconds since midnight GMT on 1st January,
1970. With the -s option, these are printed as strings for the local time
zone; the format can be altered with the -F option, and with the -g
option the times are in GMT.
blksize The number of bytes in one allocation block on the device on which the
le resides.
block The number of disk blocks used by the le.
link If the le is a link and the -L option is in eect, this contains the name
of the le linked to, otherwise it is empty. Note that if this element is
selected (zstat +link) then the -L option is automatically used.
A particular element may be selected by including its name preceded by a + in
the option list; only one element is allowed. The element may be shortened to any
unique set of leading characters. Otherwise, all elements will be shown for all les.
Options:
-A array Instead of displaying the results on standard output, assign them to an
array, one struct stat element per array element for each le in order.
In this case neither the name of the element nor the name of the les
appears in array unless the -t or -n options were given, respectively. If -
t is given, the element name appears as a prex to the appropriate array
element; if -n is given, the le name appears as a separate array element
preceding all the others. Other formatting options are respected.
-H hash Similar to -A, but instead assign the values to hash. The keys are the
elements listed above. If the -n option is provided then the name of the
le is included in the hash with key name.
-f fd Use the le on le descriptor fd instead of named les; no list of le
names is allowed in this case.
Chapter 22: Zsh Modules 289
-F fmt Supplies a strftime (see man page strftime(3)) string for the formatting
of the time elements. The -s option is implied.
-g Show the time elements in the GMT time zone. The -s option is implied.
-l List the names of the type elements (to standard output or an array
as appropriate) and return immediately; options other than -A and
arguments are ignored.
-L Perform an lstat (see man page lstat(2)) rather than a stat system
call. In this case, if the le is a link, information about the link itself
rather than the target le is returned. This option is required to make
the link element useful. Its important to note that this is the exact
opposite from man page ls(1), etc.
-n Always show the names of les. Usually these are only shown when
output is to standard output and there is more than one le in the list.
-N Never show the names of les.
-o If a raw le mode is printed, show it in octal, which is more useful for
human consumption than the default of decimal. A leading zero will
be printed in this case. Note that this does not aect whether a raw
or formatted le mode is shown, which is controlled by the -r and -s
options, nor whether a mode is shown at all.
-r Print raw data (the default format) alongside string data (the -s for-
mat); the string data appears in parentheses after the raw data.
-s Print mode, uid, gid and the three time elements as strings instead of
numbers. In each case the format is like that of ls -l.
-t Always show the type names for the elements of struct stat. Usu-
ally these are only shown when output is to standard output and no
individual element has been selected.
-T Never show the type names of the struct stat elements.
22.24 The zsh/system Module
The zsh/system module makes available various builtin commands and parameters.
22.24.1 Builtins
syserror [ -e errvar ] [ -p prex ] [ errno | errname ]
This command prints out the error message associated with errno, a system error
number, followed by a newline to standard error.
Instead of the error number, a name errname, for example ENOENT, may be used.
The set of names is the same as the contents of the array errnos, see below.
If the string prex is given, it is printed in front of the error message, with no
intervening space.
If errvar is supplied, the entire message, without a newline, is assigned to the pa-
rameter names errvar and nothing is output.
A return status of 0 indicates the message was successfully printed (although it may
not be useful if the error number was out of the systems range), a return status of
1 indicates an error in the parameters, and a return status of 2 indicates the error
name was not recognised (no message is printed for this).
Chapter 22: Zsh Modules 290
sysread [ -c countvar ] [ -i infd ] [ -o outfd ]
[ -s bufsize ] [ -t timeout ] [ param ]
Perform a single system read from le descriptor infd, or zero if that is not given.
The result of the read is stored in param or REPLY if that is not given. If countvar
is given, the number of bytes read is assigned to the parameter named by countvar.
The maximum number of bytes read is bufsize or 8192 if that is not given, however
the command returns as soon as any number of bytes was successfully read.
If timeout is given, it species a timeout in seconds, which may be zero to poll the
le descriptor. This is handled by the poll system call if available, otherwise the
select system call if available.
If outfd is given, an attempt is made to write all the bytes just read to the le
descriptor outfd. If this fails, because of a system error other than EINTR or because
of an internal zsh error during an interrupt, the bytes read but not written are stored
in the parameter named by param if supplied (no default is used in this case), and
the number of bytes read but not written is stored in the parameter named by
countvar if that is supplied. If it was successful, countvar contains the full number
of bytes transferred, as usual, and param is not set.
The error EINTR (interrupted system call) is handled internally so that shell inter-
rupts are transparent to the caller. Any other error causes a return.
The possible return statuses are
0 At least one byte of data was successfully read and, if appropriate,
written.
1 There was an error in the parameters to the command. This is the only
error for which a message is printed to standard error.
2 There was an error on the read, or on polling the input le descriptor
for a timeout. The parameter ERRNO gives the error.
3 Data were successfully read, but there was an error writing them to
outfd. The parameter ERRNO gives the error.
4 The attempt to read timed out. Note this does not set ERRNO as this is
not a system error.
5 No system error occurred, but zero bytes were read. This usually indi-
cates end of le. The parameters are set according to the usual rules;
no write to outfd is attempted.
syswrite [ -c countvar ] [ -o outfd ] data
The data (a single string of bytes) are written to the le descriptor outfd, or 1 if
that is not given, using the write system call. Multiple write operations may be
used if the rst does not write all the data.
If countvar is given, the number of byte written is stored in the parameter named
by countvar; this may not be the full length of data if an error occurred.
The error EINTR (interrupted system call) is handled internally by retrying; other-
wise an error causes the command to return. For example, if the le descriptor is
set to non-blocking output, an error EAGAIN (on some systems, EWOULDBLOCK) may
result in the command returning early.
The return status may be 0 for success, 1 for an error in the parameters to the
command, or 2 for an error on the write; no error message is printed in the last
case, but the parameter ERRNO will reect the error that occurred.
Chapter 22: Zsh Modules 291
zsystem flock [ -t timeout ] [ -f var ] [-er] le
zsystem flock -u fd expr
The builtin zsystems subcommand flock performs advisory le locking (via the
man page fcntl(2) system call) over the entire contents of the given le. This form
of locking requires the processes accessing the le to cooperate; its most obvious use
is between two instances of the shell itself.
In the rst form the named le, which must already exist, is locked by opening a le
descriptor to the le and applying a lock to the le descriptor. The lock terminates
when the shell process that created the lock exits; it is therefore often convenient to
create le locks within subshells, since the lock is automatically released when the
subshell exits. Status 0 is returned if the lock succeeds, else status 1.
In the second form the le descriptor given by the arithmetic expression fd_expr
is closed, releasing a lock. The le descriptor can be queried by using the -f var
form during the lock; on a successful lock, the shell variable var is set to the le
descriptor used for locking. The lock will be released if the le descriptor is closed by
any other means, for example using exec {var}>&-; however, the form described
here performs a safety check that the le descriptor is in use for le locking.
By default the shell waits indenitely for the lock to succeed. The option -t timeout
species a timeout for the lock in seconds; currently this must be an integer. The
shell will attempt to lock the le once a second during this period. If the attempt
times out, status 2 is returned.
If the option -e is given, the le descriptor for the lock is preserved when the shell
uses exec to start a new process; otherwise it is closed at that point and the lock
released.
If the option -r is given, the lock is only for reading, otherwise it is for reading and
writing. The le descriptor is opened accordingly.
zsystem supports subcommand
The builtin zsystems subcommand supports tests whether a given subcommand
is supported. It returns status 0 if so, else status 1. It operates silently unless there
was a syntax error (i.e. the wrong number of arguments), in which case status 255
is returned. Status 1 can indicate one of two things: subcommand is known but not
supported by the current operating system, or subcommand is not known (possibly
because this is an older version of the shell before it was implemented).
22.24.2 Parameters
errnos A readonly array of the names of errors dened on the system. These are typically
macros dened in C by including the system header le errno.h. The index of each
name (assuming the option KSH_ARRAYS is unset) corresponds to the error number.
Error numbers num before the last known error which have no name are given the
name Enum in the array.
Note that aliases for errors are not handled; only the canonical name is used.
sysparams
A readonly associative array. The keys are:
pid Returns the process ID of the current process, even in subshells. Com-
pare $$, which returns the process ID of the main shell process.
ppid Returns the process ID of the parent of the current process, even in
subshells. Compare $PPID, which returns the process ID of the parent
of the main shell process.
Chapter 22: Zsh Modules 292
22.25 The zsh/net/tcp Module
The zsh/net/tcp module makes available one builtin command:
ztcp [ -acflLtv ] [ -d fd ] [ args ]
ztcp is implemented as a builtin to allow full use of shell command line editing, le
I/O, and job control mechanisms.
If ztcp is run with no options, it will output the contents of its session table.
If it is run with only the option -L, it will output the contents of the session table
in a format suitable for automatic parsing. The option is ignored if given with a
command to open or close a session. The output consists of a set of lines, one per
session, each containing the following elements separated by spaces:
File descriptor
The le descriptor in use for the connection. For normal inbound (I)
and outbound (O) connections this may be read and written by the usual
shell mechanisms. However, it should only be close with ztcp -c.
Connection type
A letter indicating how the session was created:
Z A session created with the zftp command.
L A connection opened for listening with ztcp -l.
I An inbound connection accepted with ztcp -a.
O An outbound connection created with ztcp host ....
The local host
This is usually set to an all-zero IP address as the address of the local-
host is irrelevant.
The local port
This is likely to be zero unless the connection is for listening.
The remote host
This is the fully qualied domain name of the peer, if available, else an
IP address. It is an all-zero IP address for a session opened for listening.
The remote port
This is zero for a connection opened for listening.
22.25.1 Outbound Connections
ztcp [ -v ] [ -d fd ] host [ port ]
Open a new TCP connection to host. If the port is omitted, it will default to port
23. The connection will be added to the session table and the shell parameter REPLY
will be set to the le descriptor associated with that connection.
If -d is specied, its argument will be taken as the target le descriptor for the
connection.
In order to elicit more verbose output, use -v.
Chapter 22: Zsh Modules 293
22.25.2 Inbound Connections
ztcp -l [ -v ] [ -d fd ] port
ztcp -l will open a socket listening on TCP port. The socket will be added to
the session table and the shell parameter REPLY will be set to the le descriptor
associated with that listener.
If -d is specied, its argument will be taken as the target le descriptor for the
connection.
In order to elicit more verbose output, use -v.
ztcp -a [ -tv ] [ -d targetfd ] listenfd
ztcp -a will accept an incoming connection to the port associated with listenfd.
The connection will be added to the session table and the shell parameter REPLY
will be set to the le descriptor associated with the inbound connection.
If -d is specied, its argument will be taken as the target le descriptor for the
connection.
If -t is specied, ztcp will return if no incoming connection is pending. Otherwise
it will wait for one.
In order to elicit more verbose output, use -v.
22.25.3 Closing Connections
ztcp -cf [ -v ] [ fd ]
ztcp -c [ -v ] [ fd ]
ztcp -c will close the socket associated with fd. The socket will be removed from
the session table. If fd is not specied, ztcp will close everything in the session
table.
Normally, sockets registered by zftp (see Section 22.28 [The zsh/zftp Module],
page 294 ) cannot be closed this way. In order to force such a socket closed, use -f.
In order to elicit more verbose output, use -v.
22.25.4 Example
Here is how to create a TCP connection between two instances of zsh. We need to pick an
unassigned port; here we use the randomly chosen 5123.
On host1,
zmodload zsh/net/tcp
ztcp -l 5123
listenfd=$REPLY
ztcp -a $listenfd
fd=$REPLY
The second from last command blocks until there is an incoming connection.
Now create a connection from host2 (which may, of course, be the same machine):
zmodload zsh/net/tcp
ztcp host1 5123
fd=$REPLY
Now on each host, $fd contains a le descriptor for talking to the other. For example, on host1:
print This is a message >&$fd
and on host2:
Chapter 22: Zsh Modules 294
read -r line <&$fd; print -r - $line
prints This is a message.
To tidy up, on host1:
ztcp -c $listenfd
ztcp -c $fd
and on host2
ztcp -c $fd
22.26 The zsh/termcap Module
The zsh/termcap module makes available one builtin command:
echotc cap [ arg ... ]
Output the termcap value corresponding to the capability cap, with optional argu-
ments.
The zsh/termcap module makes available one parameter:
termcap An associative array that maps termcap capability codes to their values.
22.27 The zsh/terminfo Module
The zsh/terminfo module makes available one builtin command:
echoti cap [ arg ]
Output the terminfo value corresponding to the capability cap, instantiated with
arg if applicable.
The zsh/terminfo module makes available one parameter:
terminfo An associative array that maps terminfo capability names to their values.
22.28 The zsh/zftp Module
The zsh/zftp module makes available one builtin command:
zftp subcommand [ args ]
The zsh/zftp module is a client for FTP (le transfer protocol). It is implemented
as a builtin to allow full use of shell command line editing, le I/O, and job control
mechanisms. Often, users will access it via shell functions providing a more powerful
interface; a set is provided with the zsh distribution and is described in Chapter 25
[Zftp Function System], page 330. However, the zftp command is entirely usable
in its own right.
All commands consist of the command name zftp followed by the name of a subcom-
mand. These are listed below. The return status of each subcommand is supposed
to reect the success or failure of the remote operation. See a description of the
variable ZFTP_VERBOSE for more information on how responses from the server may
be printed.
22.28.1 Subcommands
open host[:port] [ user [ password [ account ] ] ]
Open a new FTP session to host, which may be the name of a TCP/IP connected
host or an IP number in the standard dot notation. If the argument is in the form
Chapter 22: Zsh Modules 295
host:port, open a connection to TCP port port instead of the standard FTP port
21. This may be the name of a TCP service or a number: see the description of
ZFTP_PORT below for more information.
If IPv6 addresses in colon format are used, the host should be surrounded
by quoted square brackets to distinguish it from the port, for example
[fe80::203:baff:fe02:8b56]. For consistency this is allowed with all forms of
host.
Remaining arguments are passed to the login subcommand. Note that if no ar-
guments beyond host are supplied, open will not automatically call login. If no
arguments at all are supplied, open will use the parameters set by the params sub-
command.
After a successful open, the shell variables ZFTP_HOST, ZFTP_PORT, ZFTP_IP and
ZFTP_SYSTEM are available; see Variables below.
login [ name [ password [ account ] ] ]
user [ name [ password [ account ] ] ]
Login the user name with parameters password and account. Any of the parameters
can be omitted, and will be read from standard input if needed (name is always
needed). If standard input is a terminal, a prompt for each one will be printed on
standard error and password will not be echoed. If any of the parameters are not
used, a warning message is printed.
After a successful login, the shell variables ZFTP_USER, ZFTP_ACCOUNT and ZFTP_PWD
are available; see Variables below.
This command may be re-issued when a user is already logged in, and the server
will rst be reinitialized for a new user.
params [ host [ user [ password [ account ] ] ] ]
params - Store the given parameters for a later open command with no arguments. Only
those given on the command line will be remembered. If no arguments are given,
the parameters currently set are printed, although the password will appear as a
line of stars; the return status is one if no parameters were set, zero otherwise.
Any of the parameters may be specied as a ?, which may need to be quoted to
protect it from shell expansion. In this case, the appropriate parameter will be read
from stdin as with the login subcommand, including special handling of password.
If the ? is followed by a string, that is used as the prompt for reading the parameter
instead of the default message (any necessary punctuation and whitespace should
be included at the end of the prompt). The rst letter of the parameter (only) may
be quoted with a \; hence an argument "\\$word" guarantees that the string from
the shell parameter $word will be treated literally, whether or not it begins with a
?.
If instead a single - is given, the existing parameters, if any, are deleted. In that
case, calling open with no arguments will cause an error.
The list of parameters is not deleted after a close, however it will be deleted if the
zsh/zftp module is unloaded.
For example,
zftp params ftp.elsewhere.xx juser ?Password for juser:
will store the host ftp.elsewhere.xx and the user juser and then prompt the user
for the corresponding password with the given prompt.
test Test the connection; if the server has reported that it has closed the connection
(maybe due to a timeout), return status 2; if no connection was open anyway, return
Chapter 22: Zsh Modules 296
status 1; else return status 0. The test subcommand is silent, apart from messages
printed by the $ZFTP_VERBOSE mechanism, or error messages if the connection closes.
There is no network overhead for this test.
The test is only supported on systems with either the select(2) or poll(2) system
calls; otherwise the message not supported on this system is printed instead.
The test subcommand will automatically be called at the start of any other sub-
command for the current session when a connection is open.
cd directory
Change the remote directory to directory. Also alters the shell variable ZFTP_PWD.
cdup Change the remote directory to the one higher in the directory tree. Note that cd
.. will also work correctly on non-UNIX systems.
dir [ args... ]
Give a (verbose) listing of the remote directory. The args are passed directly to
the server. The commands behaviour is implementation dependent, but a UNIX
server will typically interpret args as arguments to the ls command and with no
arguments return the result of ls -l. The directory is listed to standard output.
ls [ args ] Give a (short) listing of the remote directory. With no args, produces a raw list
of the les in the directory, one per line. Otherwise, up to vagaries of the server
implementation, behaves similar to dir.
type [ type ]
Change the type for the transfer to type, or print the current type if type is absent.
The allowed values are A (ASCII), I (Image, i.e. binary), or B (a synonym for
I).
The FTP default for a transfer is ASCII. However, if zftp nds that the remote
host is a UNIX machine with 8-bit byes, it will automatically switch to using binary
for le transfers upon open. This can subsequently be overridden.
The transfer type is only passed to the remote host when a data connection is
established; this command involves no network overhead.
ascii The same as type A.
binary The same as type I.
mode [ S | B ]
Set the mode type to stream (S) or block (B). Stream mode is the default; block
mode is not widely supported.
remote les...
local [ les... ]
Print the size and last modication time of the remote or local les. If there is
more than one item on the list, the name of the le is printed rst. The rst
number is the le size, the second is the last modication time of the le in the
format CCYYMMDDhhmmSS consisting of year, month, date, hour, minutes and seconds
in GMT. Note that this format, including the length, is guaranteed, so that time
strings can be directly compared via the [[ builtins < and > operators, even if they
are too long to be represented as integers.
Not all servers support the commands for retrieving this information. In that case,
the remote command will print nothing and return status 2, compared with status
1 for a le not found.
The local command (but not remote) may be used with no arguments, in which
case the information comes from examining le descriptor zero. This is the same
le as seen by a put command with no further redirection.
Chapter 22: Zsh Modules 297
get le [...]
Retrieve all les from the server, concatenating them and sending them to standard
output.
put le [...]
For each le, read a le from standard input and send that to the remote host with
the given name.
append le [...]
As put, but if the remote le already exists, data is appended to it instead of
overwriting it.
getat le point
putat le point
appendat le point
Versions of get, put and append which will start the transfer at the given point in
the remote le. This is useful for appending to an incomplete local le. However,
note that this ability is not universally supported by servers (and is not quite the
behaviour specied by the standard).
delete le [...]
Delete the list of les on the server.
mkdir directory
Create a new directory directory on the server.
rmdir directory
Delete the directory directory on the server.
rename old-name new-name
Rename le old-name to new-name on the server.
site args...
Send a host-specic command to the server. You will probably only need this if
instructed by the server to use it.
quote args...
Send the raw FTP command sequence to the server. You should be familiar with
the FTP command set as dened in RFC959 before doing this. Useful commands
may include STAT and HELP. Note also the mechanism for returning messages as
described for the variable ZFTP_VERBOSE below, in particular that all messages from
the control connection are sent to standard error.
close
quit Close the current data connection. This unsets the shell parameters ZFTP_HOST,
ZFTP_PORT, ZFTP_IP, ZFTP_SYSTEM, ZFTP_USER, ZFTP_ACCOUNT, ZFTP_PWD,
ZFTP_TYPE and ZFTP_MODE.
session [ sessname ]
Allows multiple FTP sessions to be used at once. The name of the session is an ar-
bitrary string of characters; the default session is called default. If this command
is called without an argument, it will list all the current sessions; with an argument,
it will either switch to the existing session called sessname, or create a new session
of that name.
Each session remembers the status of the connection, the set of connection-specic
shell parameters (the same set as are unset when a connection closes, as given
in the description of close), and any user parameters specied with the params
subcommand. Changing to a previous session restores those values; changing to a
Chapter 22: Zsh Modules 298
new session initialises them in the same way as if zftp had just been loaded. The
name of the current session is given by the parameter ZFTP_SESSION.
rmsession [ sessname ]
Delete a session; if a name is not given, the current session is deleted. If the current
session is deleted, the earliest existing session becomes the new current session,
otherwise the current session is not changed. If the session being deleted is the only
one, a new session called default is created and becomes the current session; note
that this is a new session even if the session being deleted is also called default.
It is recommended that sessions not be deleted while background commands which
use zftp are still active.
22.28.2 Parameters
The following shell parameters are used by zftp. Currently none of them are special.
ZFTP_TMOUT
Integer. The time in seconds to wait for a network operation to complete before
returning an error. If this is not set when the module is loaded, it will be given
the default value 60. A value of zero turns o timeouts. If a timeout occurs on the
control connection it will be closed. Use a larger value if this occurs too frequently.
ZFTP_IP Readonly. The IP address of the current connection in dot notation.
ZFTP_HOST
Readonly. The hostname of the current remote server. If the host was opened as
an IP number, ZFTP_HOST contains that instead; this saves the overhead for a name
lookup, as IP numbers are most commonly used when a nameserver is unavailable.
ZFTP_PORT
Readonly. The number of the remote TCP port to which the connection is open
(even if the port was originally specied as a named service). Usually this is the
standard FTP port, 21.
In the unlikely event that your system does not have the appropriate conversion
functions, this appears in network byte order. If your system is little-endian, the
port then consists of two swapped bytes and the standard port will be reported as
5376. In that case, numeric ports passed to zftp open will also need to be in this
format.
ZFTP_SYSTEM
Readonly. The system type string returned by the server in response to an FTP
SYST request. The most interesting case is a string beginning "UNIX Type: L8",
which ensures maximum compatibility with a local UNIX host.
ZFTP_TYPE
Readonly. The type to be used for data transfers , either A or I. Use the type
subcommand to change this.
ZFTP_USER
Readonly. The username currently logged in, if any.
ZFTP_ACCOUNT
Readonly. The account name of the current user, if any. Most servers do not require
an account name.
ZFTP_PWD Readonly. The current directory on the server.
Chapter 22: Zsh Modules 299
ZFTP_CODE
Readonly. The three digit code of the last FTP reply from the server as a string.
This can still be read after the connection is closed, and is not changed when the
current session changes.
ZFTP_REPLY
Readonly. The last line of the last reply sent by the server. This can still be read
after the connection is closed, and is not changed when the current session changes.
ZFTP_SESSION
Readonly. The name of the current FTP session; see the description of the session
subcommand.
ZFTP_PREFS
A string of preferences for altering aspects of zftps behaviour. Each preference is
a single character. The following are dened:
P Passive: attempt to make the remote server initiate data transfers. This
is slightly more ecient than sendport mode. If the letter S occurs
later in the string, zftp will use sendport mode if passive mode is not
available.
S Sendport: initiate transfers by the FTP PORT command. If this occurs
before any P in the string, passive mode will never be attempted.
D Dumb: use only the bare minimum of FTP commands. This prevents
the variables ZFTP_SYSTEM and ZFTP_PWD from being set, and will mean
all connections default to ASCII type. It may prevent ZFTP_SIZE from
being set during a transfer if the server does not send it anyway (many
servers do).
If ZFTP_PREFS is not set when zftp is loaded, it will be set to a default of PS, i.e.
use passive mode if available, otherwise fall back to sendport mode.
ZFTP_VERBOSE
A string of digits between 0 and 5 inclusive, specifying which responses from the
server should be printed. All responses go to standard error. If any of the numbers
1 to 5 appear in the string, raw responses from the server with reply codes beginning
with that digit will be printed to standard error. The rst digit of the three digit
reply code is dened by RFC959 to correspond to:
1. A positive preliminary reply.
2. A positive completion reply.
3. A positive intermediate reply.
4. A transient negative completion reply.
5. A permanent negative completion reply.
It should be noted that, for unknown reasons, the reply Service not available, which
forces termination of a connection, is classied as 421, i.e. transient negative, an
interesting interpretation of the word transient.
The code 0 is special: it indicates that all but the last line of multiline replies
read from the server will be printed to standard error in a processed format. By
convention, servers use this mechanism for sending information for the user to read.
The appropriate reply code, if it matches the same response, takes priority.
If ZFTP_VERBOSE is not set when zftp is loaded, it will be set to the default value
450, i.e., messages destined for the user and all errors will be printed. A null string
is valid and species that no messages should be printed.
Chapter 22: Zsh Modules 300
22.28.3 Functions
zftp_chpwd
If this function is set by the user, it is called every time the directory changes on
the server, including when a user is logged in, or when a connection is closed. In
the last case, $ZFTP_PWD will be unset; otherwise it will reect the new directory.
zftp_progress
If this function is set by the user, it will be called during a get, put or append
operation each time sucient data has been received from the host. During a get,
the data is sent to standard output, so it is vital that this function should write to
standard error or directly to the terminal, not to standard output.
When it is called with a transfer in progress, the following additional shell parameters
are set:
ZFTP_FILE
The name of the remote le being transferred from or to.
ZFTP_TRANSFER
A G for a get operation and a P for a put operation.
ZFTP_SIZE
The total size of the complete le being transferred: the same as the
rst value provided by the remote and local subcommands for a par-
ticular le. If the server cannot supply this value for a remote le being
retrieved, it will not be set. If input is from a pipe the value may be
incorrect and correspond simply to a full pipe buer.
ZFTP_COUNT
The amount of data so far transferred; a number between zero and
$ZFTP_SIZE, if that is set. This number is always available.
The function is initially called with ZFTP_TRANSFER set appropriately and
ZFTP_COUNT set to zero. After the transfer is nished, the function will be called
one more time with ZFTP_TRANSFER set to GF or PF, in case it wishes to tidy up. It
is otherwise never called twice with the same value of ZFTP_COUNT.
Sometimes the progress meter may cause disruption. It is up to the user to decide
whether the function should be dened and to use unfunction when necessary.
22.28.4 Problems
A connection may not be opened in the left hand side of a pipe as this occurs in a subshell and
the le information is not updated in the main shell. In the case of type or mode changes or
closing the connection in a subshell, the information is returned but variables are not updated
until the next call to zftp. Other status changes in subshells will not be reected by changes
to the variables (but should be otherwise harmless).
Deleting sessions while a zftp command is active in the background can have unexpected eects,
even if it does not use the session being deleted. This is because all shell subprocesses share
information on the state of all connections, and deleting a session changes the ordering of that
information.
On some operating systems, the control connection is not valid after a fork(), so that operations
in subshells, on the left hand side of a pipeline, or in the background are not possible, as they
should be. This is presumably a bug in the operating system.
Chapter 22: Zsh Modules 301
22.29 The zsh/zle Module
The zsh/zle module contains the Zsh Line Editor. See Chapter 18 [Zsh Line Editor],
page 144.
22.30 The zsh/zleparameter Module
The zsh/zleparameter module denes two special parameters that can be used to access
internal information of the Zsh Line Editor (see Chapter 18 [Zsh Line Editor], page 144).
keymaps This array contains the names of the keymaps currently dened.
widgets This associative array contains one entry per widget dened. The name of the widget
is the key and the value gives information about the widget. It is either the string
builtin for builtin widgets, a string of the form user:name for user-dened
widgets, where name is the name of the shell function implementing the widget, or
it is a string of the form completion:type:name, for completion widgets. In the
last case type is the name of the builtin widgets the completion widget imitates in
its behavior and name is the name of the shell function implementing the completion
widget.
22.31 The zsh/zprof Module
When loaded, the zsh/zprof causes shell functions to be proled. The proling results can
be obtained with the zprof builtin command made available by this module. There is no way
to turn proling o other than unloading the module.
zprof [ -c ]
Without the -c option, zprof lists proling results to standard output. The format
is comparable to that of commands like gprof.
At the top there is a summary listing all functions that were called at least once.
This summary is sorted in decreasing order of the amount of time spent in each.
The lines contain the number of the function in order, which is used in other parts
of the list in suxes of the form [num], then the number of calls made to the
function. The next three columns list the time in milliseconds spent in the function
and its descendants, the average time in milliseconds spent in the function and its
descendants per call and the percentage of time spent in all shell functions used
in this function and its descendants. The following three columns give the same
information, but counting only the time spent in the function itself. The nal
column shows the name of the function.
After the summary, detailed information about every function that was invoked
is listed, sorted in decreasing order of the amount of time spent in each function
and its descendants. Each of these entries consists of descriptions for the functions
that called the function described, the function itself, and the functions that were
called from it. The description for the function itself has the same format as in the
summary (and shows the same information). The other lines dont show the number
of the function at the beginning and have their function named indented to make it
easier to distinguish the line showing the function described in the section from the
surrounding lines.
The information shown in this case is almost the same as in the summary, but only
refers to the call hierarchy being displayed. For example, for a calling function the
column showing the total running time lists the time spent in the described function
and its descendants only for the times when it was called from that particular calling
function. Likewise, for a called function, this columns lists the total time spent in
Chapter 22: Zsh Modules 302
the called function and its descendants only for the times when it was called from
the function described.
Also in this case, the column showing the number of calls to a function also shows
a slash and then the total number of invocations made to the called function.
As long as the zsh/zprof module is loaded, proling will be done and multiple
invocations of the zprof builtin command will show the times and numbers of calls
since the module was loaded. With the -c option, the zprof builtin command will
reset its internal counters and will not show the listing.
22.32 The zsh/zpty Module
The zsh/zpty module oers one builtin:
zpty [ -e ] [ -b ] name [ arg ... ]
The arguments following name are concatenated with spaces between, then executed
as a command, as if passed to the eval builtin. The command runs under a newly
assigned pseudo-terminal; this is useful for running commands non-interactively
which expect an interactive environment. The name is not part of the command,
but is used to refer to this command in later calls to zpty.
With the -e option, the pseudo-terminal is set up so that input characters are
echoed.
With the -b option, input to and output from the pseudo-terminal are made non-
blocking.
zpty -d [ names ... ]
The second form, with the -d option, is used to delete commands previously started,
by supplying a list of their names. If no names are given, all commands are deleted.
Deleting a command causes the HUP signal to be sent to the corresponding process.
zpty -w [ -n ] name [ strings ... ]
The -w option can be used to send the to command name the given strings as input
(separated by spaces). If the -n option is not given, a newline is added at the end.
If no strings are provided, the standard input is copied to the pseudo-terminal; this
may stop before copying the full input if the pseudo-terminal is non-blocking.
Note that the command under the pseudo-terminal sees this input as if it were typed,
so beware when sending special tty driver characters such as word-erase, line-kill,
and end-of-le.
zpty -r [ -mt ] name [ param [ pattern ] ]
The -r option can be used to read the output of the command name. With only
a name argument, the output read is copied to the standard output. Unless the
pseudo-terminal is non-blocking, copying continues until the command under the
pseudo-terminal exits; when non-blocking, only as much output as is immediately
available is copied. The return status is zero if any output is copied.
When also given a param argument, at most one line is read and stored in the
parameter named param. Less than a full line may be read if the pseudo-terminal is
non-blocking. The return status is zero if at least one character is stored in param.
If a pattern is given as well, output is read until the whole string read matches
the pattern, even in the non-blocking case. The return status is zero if the string
read matches the pattern, or if the command has exited but at least one character
could still be read. If the option -m is present, the return status is zero only if the
pattern matches. As of this writing, a maximum of one megabyte of output can
Chapter 22: Zsh Modules 303
be consumed this way; if a full megabyte is read without matching the pattern, the
return status is non-zero.
In all cases, the return status is non-zero if nothing could be read, and is 2 if this is
because the command has nished.
If the -r option is combined with the -t option, zpty tests whether output is
available before trying to read. If no output is available, zpty immediately returns
the status 1. When used with a pattern, the behaviour on a failed poll is similar
to when the command has exited: the return value is zero if at least one character
could still be read even if the pattern failed to match.
zpty -t name
The -t option without the -r option can be used to test whether the command
name is still running. It returns a zero status if the command is running and a
non-zero value otherwise.
zpty [ -L ]
The last form, without any arguments, is used to list the commands currently de-
ned. If the -L option is given, this is done in the form of calls to the zpty builtin.
22.33 The zsh/zselect Module
The zsh/zselect module makes available one builtin command:
zselect [ -rwe -t timeout -a array ] [ fd ... ]
The zselect builtin is a front-end to the select system call, which blocks until
a le descriptor is ready for reading or writing, or has an error condition, with
an optional timeout. If this is not available on your system, the command prints
an error message and returns status 2 (normal errors return status 1). For more
information, see your systems documentation for man page select(3). Note there is
no connection with the shell builtin of the same name.
Arguments and options may be intermingled in any order. Non-option arguments
are le descriptors, which must be decimal integers. By default, le descriptors
are to be tested for reading, i.e. zselect will return when data is available to be
read from the le descriptor, or more precisely, when a read operation from the le
descriptor will not block. After a -r, -w and -e, the given le descriptors are to be
tested for reading, writing, or error conditions. These options and an arbitrary list
of le descriptors may be given in any order.
(The presence of an error condition is not well dened in the documentation for
many implementations of the select system call. According to recent versions of the
POSIX specication, it is really an exception condition, of which the only standard
example is out-of-band data received on a socket. So zsh users are unlikely to nd
the -e option useful.)
The option -t timeout species a timeout in hundredths of a second. This may be
zero, in which case the le descriptors will simply be polled and zselect will return
immediately. It is possible to call zselect with no le descriptors and a non-zero
timeout for use as a ner-grained replacement for sleep; note, however, the return
status is always 1 for a timeout.
The option -a array indicates that array should be set to indicate the le descrip-
tor(s) which are ready. If the option is not given, the array reply will be used for
this purpose. The array will contain a string similar to the arguments for zselect.
For example,
zselect -t 0 -r 0 -w 1
Chapter 22: Zsh Modules 304
might return immediately with status 0 and $reply containing -r 0 -w 1 to show
that both le descriptors are ready for the requested operations.
The option -A assoc indicates that the associative array assoc should be set to
indicate the le descriptor(s( which are ready. This option overrides the option -a,
nor will reply be modied. The keys of assoc are the le descriptors, and the
corresponding values are any of the characters rwe to indicate the condition.
The command returns status 0 if some le descriptors are ready for reading. If the
operation timed out, or a timeout of 0 was given and no le descriptors were ready,
or there was an error, it returns status 1 and the array will not be set (nor modied
in any way). If there was an error in the select operation the appropriate error
message is printed.
22.34 The zsh/zutil Module
The zsh/zutil module only adds some builtins:
zstyle [ -L [ pattern [ style ] ] ]
zstyle [ -e | - | -- ] pattern style strings ...
zstyle -d [ pattern [ styles ... ] ]
zstyle -g name [ pattern [ style ] ]
zstyle -abs context style name [ sep ]
zstyle -Tt context style [ strings ...]
zstyle -m context style pattern
This builtin command is used to dene and lookup styles. Styles are pairs of names
and values, where the values consist of any number of strings. They are stored
together with patterns and lookup is done by giving a string, called the context,
which is compared to the patterns. The denition stored for the rst matching
pattern will be returned.
For ordering of comparisons, patterns are searched from most specic to least spe-
cic, and patterns that are equally specic keep the order in which they were dened.
A pattern is considered to be more specic than another if it contains more com-
ponents (substrings separated by colons) or if the patterns for the components are
more specic, where simple strings are considered to be more specic than patterns
and complex patterns are considered to be more specic than the pattern *.
The rst form (without arguments) lists the denitions. Styles are shown in alpha-
betic order and patterns are shown in the order zstyle will test them.
If the -L option is given, listing is done in the form of calls to zstyle. The op-
tional rst argument is a pattern which will be matched against the string sup-
plied as the pattern for the context; note that this means, for example, zstyle -L
":completion:*" will match any supplied pattern beginning :completion:, not
just ":completion:*": use ":completion:\*" to match that. The optional second
argument limits the output to a specic style (not a pattern). -L is not compatible
with any other options.
The other forms are the following:
zstyle [ - | -- | -e ] pattern style strings ...
Denes the given style for the pattern with the strings as the value. If
the -e option is given, the strings will be concatenated (separated by
spaces) and the resulting string will be evaluated (in the same way as
it is done by the eval builtin command) when the style is looked up.
In this case the parameter reply must be assigned to set the strings
returned after the evaluation. Before evaluating the value, reply is
Chapter 22: Zsh Modules 305
unset, and if it is still unset after the evaluation, the style is treated as
if it were not set.
zstyle -d [ pattern [ styles ... ] ]
Delete style denitions. Without arguments all denitions are deleted,
with a pattern all denitions for that pattern are deleted and if any
styles are given, then only those styles are deleted for the pattern.
zstyle -g name [ pattern [ style ] ]
Retrieve a style denition. The name is used as the name of an array
in which the results are stored. Without any further arguments, all
patterns dened are returned. With a pattern the styles dened for
that pattern are returned and with both a pattern and a style, the
value strings of that combination is returned.
The other forms can be used to look up or test patterns.
zstyle -s context style name [ sep ]
The parameter name is set to the value of the style interpreted as a
string. If the value contains several strings they are concatenated with
spaces (or with the sep string if that is given) between them.
zstyle -b context style name
The value is stored in name as a boolean, i.e. as the string yes if the
value has only one string and that string is equal to one of yes, true,
on, or 1. If the value is any other string or has more than one string,
the parameter is set to no.
zstyle -a context style name
The value is stored in name as an array. If name is declared as an
associative array, the rst, third, etc. strings are used as the keys and
the other strings are used as the values.
zstyle -t context style [ strings ...]
zstyle -T context style [ strings ...]
Test the value of a style, i.e. the -t option only returns a status (sets
$?). Without any strings the return status is zero if the style is dened
for at least one matching pattern, has only one string in its value, and
that is equal to one of true, yes, on or 1. If any strings are given
the status is zero if and only if at least one of the strings is equal to at
least one of the strings in the value. If the style is dened but doesnt
match, the return status is 1. If the style is not dened, the status is 2.
The -T option tests the values of the style like -t, but it returns status
zero (rather than 2) if the style is not dened for any matching pattern.
zstyle -m context style pattern
Match a value. Returns status zero if the pattern matches at least one
of the strings in the value.
zformat -f param format specs ...
zformat -a array sep specs ...
This builtin provides two dierent forms of formatting. The rst form is selected
with the -f option. In this case the format string will be modied by replacing
sequences starting with a percent sign in it with strings from the specs. Each
spec should be of the form char:string which will cause every appearance of the
sequence %char in format to be replaced by the string. The % sequence may also
contain optional minimum and maximum eld width specications between the %
Chapter 22: Zsh Modules 306
and the char in the form %min.maxc, i.e. the minimum eld width is given rst
and if the maximum eld width is used, it has to be preceded by a dot. Specifying
a minimum eld width makes the result be padded with spaces to the right if the
string is shorter than the requested width. Padding to the left can be achieved
by giving a negative minimum eld width. If a maximum eld width is specied,
the string will be truncated after that many characters. After all % sequences for
the given specs have been processed, the resulting string is stored in the parameter
param.
The %-escapes also understand ternary expressions in the form used by prompts. The
% is followed by a ( and then an ordinary format specier character as described
above. There may be a set of digits either before or after the (; these specify
a test number, which defaults to zero. Negative numbers are also allowed. An
arbitrary delimiter character follows the format specier, which is followed by a
piece of true text, the delimiter character again, a piece of false text, and a
closing parenthesis. The complete expression (without the digits) thus looks like
%(X.text1.text2), except that the . character is arbitrary. The value given for
the format specier in the char:string expressions is evaluated as a mathematical
expression, and compared with the test number. If they are the same, text1 is
output, else text2 is output. A parenthesis may be escaped in text2 as %). Either
of text1 or text2 may contain nested %-escapes.
For example:
zformat -f REPLY "The answer is %3(c.yes.no)." c:3
outputs "The answer is yes." to REPLY since the value for the format specier c is
3, agreeing with the digit argument to the ternary expression.
The second form, using the -a option, can be used for aligning strings. Here, the
specs are of the form left:right where left and right are arbitrary strings. These
strings are modied by replacing the colons by the sep string and padding the left
strings with spaces to the right so that the sep strings in the result (and hence the
right strings after them) are all aligned if the strings are printed below each other.
All strings without a colon are left unchanged and all strings with an empty right
string have the trailing colon removed. In both cases the lengths of the strings are
not used to determine how the other strings are to be aligned. The resulting strings
are stored in the array.
zregexparse
This implements some internals of the _regex_arguments function.
zparseopts [ -D ] [ -K ] [ -M ] [ -E ] [ -a array ] [ -A assoc ] specs
This builtin simplies the parsing of options in positional parameters, i.e. the set
of arguments given by $*. Each spec describes one option and must be of the form
opt[=array]. If an option described by opt is found in the positional parameters
it is copied into the array specied with the -a option; if the optional =array is
given, it is instead copied into that array.
Note that it is an error to give any spec without an =array unless one of the -a or
-A options is used.
Unless the -E option is given, parsing stops at the rst string that isnt described
by one of the specs. Even with -E, parsing always stops at a positional parameter
equal to - or --.
The opt description must be one of the following. Any of the special characters can
appear in the option name provided it is preceded by a backslash.
Chapter 22: Zsh Modules 307
name
name+ The name is the name of the option without the leading -. To specify a
GNU-style long option, one of the usual two leading - must be included
in name; for example, a --file option is represented by a name of -
file.
If a + appears after name, the option is appended to array each time
it is found in the positional parameters; without the + only the last
occurrence of the option is preserved.
If one of these forms is used, the option takes no argument, so parsing
stops if the next positional parameter does not also begin with - (unless
the -E option is used).
name:
name:-
name:: If one or two colons are given, the option takes an argument; with one
colon, the argument is mandatory and with two colons it is optional.
The argument is appended to the array after the option itself.
An optional argument is put into the same array element as the option
name (note that this makes empty strings as arguments indistinguish-
able). A mandatory argument is added as a separate element unless
the :- form is used, in which case the argument is put into the same
element.
A + as described above may appear between the name and the rst
colon.
The options of zparseopts itself are:
-a array As described above, this names the default array in which to store the
recognised options.
-A assoc If this is given, the options and their values are also put into an asso-
ciative array with the option names as keys and the arguments (if any)
as the values.
-D If this option is given, all options found are removed from the positional
parameters of the calling shell or shell function, up to but not including
any not described by the specs. This is similar to using the shift
builtin.
-K With this option, the arrays specied with the -a option and with the
=array forms are kept unchanged when none of the specs for them is
used. Otherwise the entire array is replaced when any of the specs is
used. Individual elements of associative arrays specied with the -A
option are preserved by -K. This allows assignment of default values to
arrays before calling zparseopts.
-M This changes the assignment rules to implement a map among equivalent
option names. If any spec uses the =array form, the string array is
interpreted as the name of another spec, which is used to choose where
to store the values. If no other spec is found, the values are stored as
usual. This changes only the way the values are stored, not the way $*
is parsed, so results may be unpredicable if the name+ specier is used
inconsistently.
-E This changes the parsing rules to not stop at the rst string that isnt
described by one of the specs. It can be used to test for or (if used
Chapter 23: Calendar Function System 308
together with -D) extract options and their arguments, ignoring all other
options and arguments that may be in the positional parameters.
For example,
set -- -a -bx -c y -cz baz -cend
zparseopts a=foo b:=bar c+:=bar
will have the eect of
foo=(-a)
bar=(-b x -c y -c z)
The arguments from baz on will not be used.
As an example for the -E option, consider:
set -- -a x -b y -c z arg1 arg2
zparseopts -E -D b:=bar
will have the eect of
bar=(-b y)
set -- -a x -c z arg1 arg2
I.e., the option -b and its arguments are taken from the positional parameters and
put into the array bar.
The -M option can be used like this:
set -- -a -bx -c y -cz baz -cend
zparseopts -A bar -M a=foo b+: c:=b
to have the eect of
foo=(-a)
bar=(-a -b xyz)
23 Calendar Function System
23.1 Description
The shell is supplied with a series of functions to replace and enhance the traditional Unix
calendar programme, which warns the user of imminent or future events, details of which are
stored in a text le (typically calendar in the users home directory). The version provided
here includes a mechanism for alerting the user when an event is due.
In addition a function age is provided that can be used in a glob qualier; it allows les to be
selected based on their modication times.
The format of the calendar le and the dates used there in and in the age function are described
rst, then the functions that can be called to examine and modify the calendar le.
The functions here depend on the availability of the zsh/datetime module which is usually
installed with the shell. The library function strptime() must be available; it is present on
most recent operating systems.
23.2 File and Date Formats
Chapter 23: Calendar Function System 309
23.2.1 Calendar File Format
The calendar le is by default ~/calendar. This can be congured by the calendar-file style,
see Section 23.4 [Calendar Styles], page 317. The basic format consists of a series of separate
lines, with no indentation, each including a date and time specication followed by a description
of the event.
Various enhancements to this format are supported, based on the syntax of Emacs calendar
mode. An indented line indicates a continuation line that continues the description of the event
from the preceding line (note the date may not be continued in this way). An initial ampersand
(&) is ignored for compatibility.
An indented line on which the rst non-whitespace character is # is not displayed with the
calendar entry, but is still scanned for information. This can be used to hide information useful
to the calendar system but not to the user, such as the unique identier used by calendar_add.
The Emacs extension that a date with no description may refer to a number of succeeding events
at dierent times is not supported.
Unless the done-file style has been altered, any events which have been processed are appended
to the le with the same name as the calendar le with the sux .done, hence ~/calendar.done
by default.
An example is shown below.
23.2.2 Date Format
The format of the date and time is designed to allow exibility without admitting ambiguity.
(The words date and time are both used in the documentation below; except where specically
noted this implies a string that may include both a date and a time specication.) Note that there
is no localization support; month and day names must be in English and separator characters are
xed. Matching is case insensitive, and only the rst three letters of the names are signicant,
although as a special case a form beginning "month" does not match "Monday". Furthermore,
time zones are not handled; all times are assumed to be local.
It is recommended that, rather than exploring the intricacies of the system, users nd a date
format that is natural to them and stick to it. This will avoid unexpected eects. Various key
facts should be noted.
In particular, note the confusion between month/day/year and day/month/year when the
month is numeric; these formats should be avoided if at all possible. Many alternatives are
available.
The year must be given in full to avoid confusion, and only years from 1900 to 2099 inclusive
are matched.
The following give some obvious examples; users nding here a format they like and not subject
to vagaries of style may skip the full description. As dates and times are matched separately
(even though the time may be embedded in the date), any date format may be mixed with any
format for the time of day provide the separators are clear (whitespace, colons, commas).
2007/04/03 13:13
2007/04/03:13:13
2007/04/03 1:13 pm
3rd April 2007, 13:13
April 3rd 2007 1:13 p.m.
Apr 3, 2007 13:13
Tue Apr 03 13:13:00 2007
13:13 2007/apr/3
More detailed rules follow.
Chapter 23: Calendar Function System 310
Times are parsed and extracted before dates. They must use colons to separate hours and
minutes, though a dot is allowed before seconds if they are present. This limits time formats to
the following:
HH:MM[:SS[.FFFFF]] [am|pm|a.m.|p.m.]
HH:MM.SS[.FFFFF] [am|pm|a.m.|p.m.]
Here, square brackets indicate optional elements, possibly with alternatives. Fractions of a sec-
ond are recognised but ignored. For absolute times (the normal format require by the calendar
le and the age function) a date is mandatory but a time of day is not; the time returned is
at the start of the date. One variation is allowed: if a.m. or p.m. or one of their variants is
present, an hour without a minute is allowed, e.g. 3 p.m..
Time zones are not handled, though if one is matched following a time specication it will be
removed to allow a surrounding date to be parsed. This only happens if the format of the
timezone is not too unusual. The following are examples of forms that are understood:
+0100
GMT
GMT-7
CET+1CDT
Any part of the timezone that is not numeric must have exactly three capital letters in the name.
Dates suer from the ambiguity between DD/MM/YYYY and MM/DD/YYYY. It is recom-
mended this form is avoided with purely numeric dates, but use of ordinals, eg. 3rd/04/2007,
will resolve the ambiguity as the ordinal is always parsed as the day of the month. Years must
be four digits (and the rst two must be 19 or 20); 03/04/08 is not recognised. Other numbers
may have leading zeroes, but they are not required. The following are handled:
YYYY/MM/DD
YYYY-MM-DD
YYYY/MNM/DD
YYYY-MNM-DD
DD[th|st|rd] MNM[,] [ YYYY ]
MNM DD[th|st|rd][,] [ YYYY ]
DD[th|st|rd]/MM[,] YYYY
DD[th|st|rd]/MM/YYYY
MM/DD[th|st|rd][,] YYYY
MM/DD[th|st|rd]/YYYY
Here, MNM is at least the rst three letters of a month name, matched case-insensitively. The
remainder of the month name may appear but its contents are irrelevant, so janissary, febrile,
martial, apricot, maybe, junta, etc. are happily handled.
Where the year is shown as optional, the current year is assumed. There are only two such
cases, the form Jun 20 or 14 September (the only two commonly occurring forms, apart from
a "the" in some forms of English, which isnt currently supported). Such dates will of course
become ambiguous in the future, so should ideally be avoided.
Times may follow dates with a colon, e.g. 1965/07/12:09:45; this is in order to provide a
format with no whitespace. A comma and whitespace are allowed, e.g. 1965/07/12, 09:45.
Currently the order of these separators is not checked, so illogical formats such as 1965/07/12,
: ,09:45 will also be matched. For simplicity such variations are not shown in the list above.
Otherwise, a time is only recognised as being associated with a date if there is only whitespace
in between, or if the time was embedded in the date.
Chapter 23: Calendar Function System 311
Days of the week are not normally scanned, but will be ignored if they occur at the start of
the date pattern only. However, in contexts where it is useful to specify dates relative to today,
days of the week with no other date specication may be given. The day is assumed to be
either today or within the past week. Likewise, the words yesterday, today and tomorrow are
handled. All matches are case-insensitive. Hence if today is Monday, then Sunday is equivalent
to yesterday, Monday is equivalent to today, but Tuesday gives a date six days ago. This is
not generally useful within the calendar le. Dates in this format may be combined with a time
specication; for example Tomorrow, 8 p.m..
For example, the standard date format:
Fri Aug 18 17:00:48 BST 2006
is handled by matching HH:MM:SS and removing it together with the matched (but unused)
time zone. This leaves the following:
Fri Aug 18 2006
Fri is ignored and the rest is matched according to the standard rules.
23.2.3 Relative Time Format
In certain places relative times are handled. Here, a date is not allowed; instead a combination
of various supported periods are allowed, together with an optional time. The periods must be
in order from most to least signicant.
In some cases, a more accurate calculation is possible when there is an anchor date: osets of
months or years pick the correct day, rather than being rounded, and it is possible to pick a
particular day in a month as (1st Friday), etc., as described in more detail below.
Anchors are available in the following cases. If one or two times are passed to the function
calendar, the start time acts an anchor for the end time when the end time is relative (even if
the start time is implicit). When examining calendar les, the scheduled event being examined
anchors the warning time when it is given explicitly by means of the WARN keyword; likewise,
the scheduled event anchors a repetition period when given by the RPT keyword, so that speci-
cations such as RPT 2 months, 3rd Thursday are handled properly. Finally, the -R argument
to calendar_scandate directly provides an anchor for relative calculations.
The periods handled, with possible abbreviations are:
Years years, yrs, ys, year, yr, y, yearly. A year is 365.25 days unless there is an anchor.
Months months, mons, mnths, mths, month, mon, mnth, mth, monthly. Note that m, ms, mn,
mns are ambiguous and are not handled. A month is a period of 30 days rather than
a calendar month unless there is an anchor.
Weeks weeks, wks, ws, week, wk, w, weekly
Days days, dys, ds, day, dy, d, daily
Hours hours, hrs, hs, hour, hr, h, hourly
Minutes minutes, mins, minute, min, but not m, ms, mn or mns
Seconds seconds, secs, ss, second, sec, s
Spaces between the numbers are optional, but are required between items, although a comma
may be used (with or without spaces).
The forms yearly to hourly allow the number to be omitted; it is assumed to be 1. For
example, 1 d and daily are equivalent. Note that using those forms with plurals is confusing;
2 yearly is the same as 2 years, not twice yearly, so it is recommended they only be used
without numbers.
Chapter 23: Calendar Function System 312
When an anchor time is present, there is an extension to handle regular events in the form of
the nth someday of the month. Such a specication must occur immediately after any year and
month specication, but before any time of day, and must be in the form n(th|st|rd) day, for
example 1st Tuesday or 3rd Monday. As in other places, days are matched case insensitively,
must be in English, and only the rst three letters are signicant except that a form beginning
month does not match Monday. No attempt is made to sanitize the resulting date; attempts
to squeeze too many occurrences into a month will push the day into the next month (but in
the obvious fashion, retaining the correct day of the week).
Here are some examples:
30 years 3 months 4 days 3:42:41
14 days 5 hours
Monthly, 3rd Thursday
4d,10hr
23.2.4 Example
Here is an example calendar le. It uses a consistent date format, as recommended above.
Feb 1, 2006 14:30 Pointless bureaucratic meeting
Mar 27, 2006 11:00 Mutual recrimination and finger pointing
Bring water pistol and waterproofs
Mar 31, 2006 14:00 Very serious managerial pontification
# UID 12C7878A9A50
Apr 10, 2006 13:30 Even more pointless blame assignment exercise WARN 30 mins
May 18, 2006 16:00 Regular moaning session RPT monthly, 3rd Thursday
The second entry has a continuation line. The third entry has a continuation line that will not be
shown when the entry is displayed, but the unique identier will be used by the calendar_add
function when updating the event. The fourth entry will produce a warning 30 minutes before
the event (to allow you to equip yourself appropriately). The fth entry repeats after a month
on the 3rd Thursday, i.e. June 15, 2006, at the same time.
23.3 User Functions
This section describes functions that are designed to be called directly by the user. The rst
part describes those functions associated with the users calendar; the second part describes the
use in glob qualiers.
23.3.1 Calendar system functions
calendar [ -abdDsv ] [ -C calle ] [ -n num ] [ -S showprog ] [ [ start ] end ](
calendar -r [ -abdDrsv ] [ -C calle ] [ -n num ] [ -S showprog ] [ start ]
Show events in the calendar.
With no arguments, show events from the start of today until the end of the next
working day after today. In other words, if today is Friday, Saturday, or Sunday,
show up to the end of the following Monday, otherwise show today and tomorrow.
If end is given, show events from the start of today up to the time and date given,
which is in the format described in the previous section. Note that if this is a date
the time is assumed to be midnight at the start of the date, so that eectively this
shows all events before the given date.
end may start with a +, in which case the remainder of the specication is a relative
time format as described in the previous section indicating the range of time from
the start time that is to be included.
Chapter 23: Calendar Function System 313
If start is also given, show events starting from that time and date. The word now
can be used to indicate the current time.
To implement an alert when events are due, include calendar -s in your ~/.zshrc
le.
Options:
-a Show all items in the calendar, regardless of the start and end.
-b Brief: dont display continuation lines (i.e. indented lines following the
line with the date/time), just the rst line.
-B lines Brief: display at most the rst lines lines of the calendar entry. -B 1
is equivalent to -b.
-C calle Explicitly specify a calendar le instead of the value of the calendar-
file style or the default ~/calendar.
-d Move any events that have passed from the calendar le to the "done"
le, as given by the done-file style or the default which is the calendar
le with .done appended. This option is implied by the -s option.
-D Turns o the option -d, even if the -s option is also present.
-n num, -num
Show at least num events, if present in the calendar le, regardless of
the start and end.
-r Show all the remaining options in the calendar, ignoring the given end
time. The start time is respected; any argument given is treated as a
start time.
-s Use the shells sched command to schedule a timed event that will warn
the user when an event is due. Note that the sched command only runs
if the shell is at an interactive prompt; a foreground task blocks the
scheduled task from running until it is nished.
The timed event usually runs the programme calendar_show to show
the event, as described in Section 23.5 [Calendar Utility Functions],
page 318.
By default, a warning of the event is shown ve minutes before it is due.
The warning period can be congured by the style warn-time or for a
single calendar entry by including WARN reltime in the rst line of the
entry, where reltime is one of the usual relative time formats.
A repeated event may be indicated by including RPT reldate in the rst
line of the entry. After the scheduled event has been displayed it will
be re-entered into the calendar le at a time reldate after the existing
event. Note that this is currently the only use made of the repeat count,
so that it is not possible to query the schedule for a recurrence of an
event in the calendar until the previous event has passed.
If RPT is used, it is also possible to specify that certain recurrences of an
event are rescheduled or cancelled. This is done with the OCCURRENCE
keyword, followed by whitespace and the date and time of the occur-
rence in the regular sequence, followed by whitespace and either the
date and time of the rescheduled event or the exact string CANCELLED.
In this case the date and time must be in exactly the "date with lo-
cal time" format used by the text/calendar MIME type (RFC 2445),
<YYYY><MM><DD>T<hh><mm><ss> (note the presence of the literal
Chapter 23: Calendar Function System 314
character T). The rst word (the regular recurrence) may be something
other than a proper date/time to indicate that the event is additional
to the normal sequence; a convention that retains the formatting ap-
pearance is XXXXXXXXTXXXXXX.
Furthermore, it is useful to record the next regular recurrence (as then
the displayed date may be for a rescheduled event so cannot be used
for calculating the regular sequence). This is specied by RECURRENCE
and a time or date in the same format. calendar_add adds such an
indication when it encounters a recurring event that does not include
one, based on the headline date/time.
If calendar_add is used to update occurrences the UID keyword de-
scribed there should be present in both the existing entry and the added
occurrence in order to identify recurring event sequences.
For example,
Thu May 6, 2010 11:00 Informal chat RPT 1 week
# RECURRENCE 20100506T110000
# OCCURRENCE 20100513T110000 20100513T120000
# OCCURRENCE 20100520T110000 CANCELLED
The event that occurs at 11:00 on 13th May 2010 is rescheduled an hour
later. The event that occurs a week later is cancelled. The occurrences
are given on a continuation line starting with a # character so will not
usually be displayed as part of the event. As elsewhere, no account
of time zones is taken with the times. After the next event occurs
the headline date/time will be Thu May 13, 2010 12:00 while the
RECURRENCE date/time will be 20100513T110000 (note that cancelled
and moved events are not taken account of in the RECURRENCE, which
records what the next regular recurrence is, but they are accounted for
in the headline date/time).
It is safe to run calendar -s to reschedule an existing event (if the
calendar le has changed, for example), and also to have it running in
multiples instances of the shell since the calendar le is locked when in
use.
By default, expired events are moved to the "done" le; see the -d
option. Use -D to prevent this.
-S showprog
Explicitly specify a programme to be used for showing events instead of
the value of the show-prog style or the default calendar_show.
-v Verbose: show more information about stages of processing. This is
useful for conrming that the function has successfully parsed the dates
in the calendar le.
calendar_add [ -BL ] event ...
Adds a single event to the calendar in the appropriate location. The event can
contain multiple lines, as described in Section 23.2 [Calendar File and Date Formats],
page 308. Using this function ensures that the calendar le is sorted in date and
time order. It also makes special arrangements for locking the le while it is altered.
The old calendar is left in a le with the sux .old.
The option -B indicates that backing up the calendar le will be handled by the
caller and should not be performed by calendar_add. The option -L indicates that
Chapter 23: Calendar Function System 315
calendar_add does not need to lock the calendar le as it is already locked. These
options will not usually be needed by users.
If the style reformat-date is true, the date and time of the new entry will be
rewritten into the standard date format: see the descriptions of this style and the
style date-format.
The function can use a unique identier stored with each event to ensure that
updates to existing events are treated correctly. The entry should contain the word
UID, followed by whitespace, followed by a word consisting entirely of hexadecimal
digits of arbitrary length (all digits are signicant, including leading zeroes). As
the UID is not directly useful to the user, it is convenient to hide it on an indented
continuation line starting with a #, for example:
Aug 31, 2007 09:30 Celebrate the end of the holidays
# UID 045B78A0
The second line will not be shown by the calendar function.
It is possible to specify the RPT keyword followed by CANCELLED instead of a relative
time. This causes any matched event or series of events to be cancelled (the original
event does not have to be marked as recurring in order to be cancelled by this
method). A UID is required in order to match an existing event in the calendar.
calendar_add will attempt to manage recurrences and occurrences of repeating
events as described for event scheduling by calendar -s above. To reschedule or
cancel a single event calendar_add should be called with an entry that includes the
correct UID but does not include the RPT keyword as this is taken to mean the entry
applies to a series of repeating events and hence replaces all existing information.
Each rescheduled or cancelled occurrence must have an OCCURRENCE keyword in the
entry passed to calendar_add which will be merged into the calendar le. Any
existing reference to the occurrence is replaced. An occurrence that does not refer
to a valid existing event is added as a one-o occurrence to the same calendar entry.
calendar_edit
This calls the users editor to edit the calendar le. If there are arguments, they are
taken as the editor to use (the le name is appended to the commands); otherwise,
the editor is given by the variable VISUAL, if set, else the variable EDITOR.
If the calendar scheduler was running, then after editing the le calendar -s is
called to update it.
This function locks out the calendar system during the edit. Hence it should be
used to edit the calendar le if there is any possibility of a calendar event occurring
meanwhile. Note this can lead to another shell with calendar functions enabled
hanging waiting for a lock, so it is necessary to quit the editor as soon as possible.
calendar_parse calendar-entry
This is the internal function that analyses the parts of a calendar entry, which is
passed as the only argument. The function returns status 1 if the argument could not
be parsed as a calendar entry and status 2 if the wrong number of arguments were
passed; it also sets the parameter reply to an empty associative array. Otherwise,
it returns status 0 and sets elements of the associative array reply as follows:
time The time as a string of digits in the same units as $EPOCHSECONDS
schedtime
The regularly scheduled time. This may dier from the actual event
time time if this is a recurring event and the next occurrence has been
rescheduled. Then time gives the actual time and schedtime the time
of the regular recurrence before modication.
Chapter 23: Calendar Function System 316
text1 The text from the line not including the date and time of the event, but
including any WARN or RPT keywords and values.
warntime Any warning time given by the WARN keyword as a string of digits con-
taining the time at which to warn in the same units as $EPOCHSECONDS.
(Note this is an absolute time, not the relative time passed down.) Not
set no WARN keyword and value were matched.
warnstr The raw string matched after the WARN keyword, else unset.
rpttime Any recurrence time given by the RPT keyword as a string of digits con-
taining the time of the recurrence in the same units as $EPOCHSECONDS.
(Note this is an absolute time.) Not set if no RPT keyword and value
were matched.
schedrpttime
The next regularly scheduled occurrence of a recurring event before
modication. This may dier from rpttime, which is the actual time
of the event that may have been rescheduled from the regular time.
rptstr The raw string matched after the RPT keyword, else unset.
text2 The text from the line after removal of the date and any keywords and
values.
calendar_showdate [ -r ] [ -f fmt ] date-spec ...
The given date-spec is interpreted and the corresponding date and time printed. If
the initial date-spec begins with a + or - it is treated as relative to the current time;
date-specs after the rst are treated as relative to the date calculated so far and
a leading + is optional in that case. This allows one to use the system as a date
calculator. For example, calendar_showdate +1 month, 1st Friday shows the
date of the rst Friday of next month.
With the option -r nothing is printed but the value of the date and time in seconds
since the epoch is stored in the parameter REPLY.
With the option -f fmt the given date/time conversion format is passed to strftime;
see notes on the date-format style below.
In order to avoid ambiguity with negative relative date specications, options must
occur in separate words; in other words, -r and -f should not be combined in the
same word.
calendar_sort
Sorts the calendar le into date and time order. The old calendar is left in a le
with the sux .old.
23.3.2 Glob qualiers
The function age can be autoloaded and use separately from the calendar system, although it
uses the function calendar_scandate for date formatting. It requires the zsh/stat builtin, but
uses only the builtin zstat.
age selects les having a given modication time for use as a glob qualier. The format of the
date is the same as that understood by the calendar system, described in Section 23.2 [Calendar
File and Date Formats], page 308.
The function can take one or two arguments, which can be supplied either directly as command
or arguments, or separately as shell parameters.
Chapter 23: Calendar Function System 317
print *(e:age 2006/10/04 2006/10/09:)
The example above matches all les modied between the start of those dates. The second
argument may alternatively be a relative time introduced by a +:
print *(e:age 2006/10/04 +5d:)
The example above is equivalent to the previous example.
In addition to the special use of days of the week, today and yesterday, times with no date may
be specied; these apply to today. Obviously such uses become problematic around midnight.
print *(e-age 12:00 13:30-)
The example above shows les modied between 12:00 and 13:00 today.
print *(e:age 2006/10/04:)
The example above matches all les modied on that date. If the second argument is omitted
it is taken to be exactly 24 hours after the rst argument (even if the rst argument contains a
time).
print *(e-age 2006/10/04:10:15 2006/10/04:10:45-)
The example above supplies times. Note that whitespace within the time and date specication
must be quoted to ensure age receives the correct arguments, hence the use of the additional
colon to separate the date and time.
AGEREF=2006/10/04:10:15
AGEREF2=2006/10/04:10:45
print *(+age)
This shows the same example before using another form of argument passing. The dates and
times in the parameters AGEREF and AGEREF2 stay in eect until unset, but will be overridden
if any argument is passed as an explicit argument to age. Any explicit argument causes both
parameters to be ignored.
Instead of an explicit date and time, its possible to use the modication time of a le as the
date and time for either argument by introducing the le name with a colon:
print *(e-age :file1-)
matches all les created on the same day (24 hours starting from midnight) as file1.
print *(e-age :file1 :file2-)
matches all les modied no earlier than file1 and no later than file2; precision here is to
the nearest second.
23.4 Styles
The zsh style mechanism using the zstyle command is describe in Section 22.34 [The zsh/zutil
Module], page 304. This is the same mechanism used in the completion system.
The styles below are all examined in the context :datetime:function:, for example
:datetime:calendar:.
calendar-file
The location of the main calendar. The default is ~/calendar.
date-format
A strftime format string (see man page strftime(3)) with the zsh extensions pro-
viding various numbers with no leading zero or space if the number is a single digit
as described for the %D{string} prompt format in Chapter 13 [Prompt Expansion],
page 33.
This is used for outputting dates in calendar, both to support the -v option and
when adding recurring events back to the calendar le, and in calendar_showdate
as the nal output format.
Chapter 23: Calendar Function System 318
If the style is not set, the default used is similar the standard system format as
output by the date command (also known as ctime format): %a %b %d %H:%M:%S
%Z %Y.
done-file
The location of the le to which events which have passed are appended. The default
is the calendar le location with the sux .done. The style may be set to an empty
string in which case a "done" le will not be maintained.
reformat-date
Boolean, used by calendar_add. If it is true, the date and time of new entries added
to the calendar will be reformatted to the format given by the style date-format or
its default. Only the date and time of the event itself is reformatted; any subsidiary
dates and times such as those associated with repeat and warning times are left
alone.
show-prog
The programme run by calendar for showing events. It will be passed the start
time and stop time of the events requested in seconds since the epoch followed by
the event text. Note that calendar -s uses a start time and stop time equal to one
another to indicate alerts for specic events.
The default is the function calendar_show.
warn-time
The time before an event at which a warning will be displayed, if the rst line of
the event does not include the text EVENT reltime. The default is 5 minutes.
23.5 Utility functions
calendar_lockfiles
Attempt to lock the les given in the argument. To prevent problems with network
le locking this is done in an ad hoc fashion by attempting to create a symbolic
link to the le with the name le.lockfile. No other system level functions are
used for locking, i.e. the le can be accessed and modied by any utility that does
not use this mechanism. In particular, the user is not prevented from editing the
calendar le at the same time unless calendar_edit is used.
Three attempts are made to lock the le before giving up. If the module
zsh/zselect is available, the times of the attempts are jittered so that multiple
instances of the calling function are unlikely to retry at the same time.
The les locked are appended to the array lockfiles, which should be local to the
caller.
If all les were successfully locked, status zero is returned, else status one.
This function may be used as a general le locking function, although this will only
work if only this mechanism is used to lock les.
calendar_read
This is a backend used by various other functions to parse the calendar le, which
is passed as the only argument. The array calendar_entries is set to the list of
events in the le; no pruning is done except that ampersands are removed from the
start of the line. Each entry may contain multiple lines.
calendar_scandate
This is a generic function to parse dates and times that may be used separately from
the calendar system. The argument is a date or time specication as described in
Chapter 23: Calendar Function System 319
Section 23.2 [Calendar File and Date Formats], page 308. The parameter REPLY is
set to the number of seconds since the epoch corresponding to that date or time.
By default, the date and time may occur anywhere within the given argument.
Returns status zero if the date and time were successfully parsed, else one.
Options:
-a The date and time are anchored to the start of the argument; they will
not be matched if there is preceding text.
-A The date and time are anchored to both the start and end of the argu-
ment; they will not be matched if the is any other text in the argument.
-d Enable additional debugging output.
-m Minus. When -R anchor time is also given the relative time is calculated
backwards from anchor time.
-r The argument passed is to be parsed as a relative time.
-R anchor time
The argument passed is to be parsed as a relative time. The time is rela-
tive to anchor time, a time in seconds since the epoch, and the returned
value is the absolute time corresponding to advancing anchor time by
the relative time given. This allows lengths of months to be correctly
taken into account. If the nal day does not exist in the given month,
the last day of the nal month is given. For example, if the anchor time
is during 31st January 2007 and the relative time is 1 month, the nal
time is the same time of day during 28th February 2007.
-s In addition to setting REPLY, set REPLY2 to the remainder of the argu-
ment after the date and time have been stripped. This is empty if the
option -A was given.
-t Allow a time with no date specication. The date is assumed to be
today. The behaviour is unspecied if the iron tongue of midnight is
tolling twelve.
calendar_show
The function used by default to display events. It accepts a start time and end time
for events, both in epoch seconds, and an event description.
The event is always printed to standard output. If the command line editor is
active (which will usually be the case) the command line will be redisplayed after
the output.
If the parameter DISPLAY is set and the start and end times are the same (indicating
a scheduled event), the function uses the command xmessage to display a window
with the event details.
23.6 Bugs
As the system is based entirely on shell functions (with a little support from the zsh/datetime
module) the mechanisms used are not as robust as those provided by a dedicated calendar utility.
Consequently the user should not rely on the shell for vital alerts.
There is no calendar_delete function.
There is no localization support for dates and times, nor any support for the use of time zones.
Relative periods of months and years do not take into account the variable number of days.
Chapter 24: TCP Function System 320
The calendar_show function is currently hardwired to use xmessage for displaying alerts on
X Window System displays. This should be congurable and ideally integrate better with the
desktop.
calendar_lockfiles hangs the shell while waiting for a lock on a le. If called from a scheduled
task, it should instead reschedule the event that caused it.
24 TCP Function System
24.1 Description
A module zsh/net/tcp is provided to provide network I/O over TCP/IP from within the shell;
see its description in Chapter 22 [Zsh Modules], page 263 . This manual page describes a function
suite based on the module. If the module is installed, the functions are usually installed at the
same time, in which case they will be available for autoloading in the default function search
path. In addition to the zsh/net/tcp module, the zsh/zselect module is used to implement
timeouts on read operations. For troubleshooting tips, consult the corresponding advice for the
zftp functions described in Chapter 25 [Zftp Function System], page 330 .
There are functions corresponding to the basic I/O operations open, close, read and send,
named tcp_open etc., as well as a function tcp_expect for pattern match analysis of data read
as input. The system makes it easy to receive data from and send data to multiple named
sessions at once. In addition, it can be linked with the shells line editor in such a way that
input data is automatically shown at the terminal. Other facilities available including logging,
ltering and congurable output prompts.
To use the system where it is available, it should be enough to autoload -U tcp_open and
run tcp_open as documented below to start a session. The tcp_open function will autoload the
remaining functions.
24.2 TCP User Functions
24.2.1 Basic I/O
tcp_open [-qz] host port [ sess ]
tcp_open [-qz] [ -s sess | -l sess,... ] ...
tcp_open [-qz] [-a fd | -f fd ] [ sess ]
Open a new session. In the rst and simplest form, open a TCP connection to host
host at port port; numeric and symbolic forms are understood for both.
If sess is given, this becomes the name of the session which can be used to refer
to multiple dierent TCP connections. If sess is not given, the function will invent
a numeric name value (note this is not the same as the le descriptor to which
the session is attached). It is recommended that session names not include funny
characters, where funny characters are not well-dened but certainly do not include
alphanumerics or underscores, and certainly do include whitespace.
In the second case, one or more sessions to be opened are given by name. A single
session name is given after -s and a comma-separated list after -l; both options
may be repeated as many times as necessary. A failure to open any session causes
tcp_open to abort. The host and port are read from the le .ztcp_sessions in the
same directory as the users zsh initialisation les, i.e. usually the home directory,
but $ZDOTDIR if that is set. The le consists of lines each giving a session name and
Chapter 24: TCP Function System 321
the corresponding host and port, in that order (note the session name comes rst,
not last), separated by whitespace.
The third form allows passive and fake TCP connections. If the option -a is used,
its argument is a le descriptor open for listening for connections. No function
front-end is provided to open such a le descriptor, but a call to ztcp -l port will
create one with the le descriptor stored in the parameter $REPLY. The listening
port can be closed with ztcp -c fd. A call to tcp_open -a fd will block until
a remote TCP connection is made to port on the local machine. At this point, a
session is created in the usual way and is largely indistinguishable from an active
connection created with one of the rst two forms.
If the option -f is used, its argument is a le descriptor which is used directly as if
it were a TCP session. How well the remainder of the TCP function system copes
with this depends on what actually underlies this le descriptor. A regular le is
likely to be unusable; a FIFO (pipe) of some sort will work better, but note that it
is not a good idea for two dierent sessions to attempt to read from the same FIFO
at once.
If the option -q is given with any of the three forms, tcp_open will not print
informational messages, although it will in any case exit with an appropriate status.
If the line editor (zle) is in use, which is typically the case if the shell is interactive,
tcp_open installs a handler inside zle which will check for new data at the same
time as it checks for keyboard input. This is convenient as the shell consumes no
CPU time while waiting; the test is performed by the operating system. Giving the
option -z to any of the forms of tcp_open prevents the handler from being installed,
so data must be read explicitly. Note, however, this is not necessary for executing
complete sets of send and read commands from a function, as zle is not active at
this point. Generally speaking, the handler is only active when the shell is waiting
for input at a command prompt or in the vared builtin. The option has no eect if
zle is not active; [[ -o zle]] will test for this.
The rst session to be opened becomes the current session and subsequent calls
to tcp_open do not change it. The current session is stored in the parameter
$TCP_SESS; see below for more detail about the parameters used by the system.
The function tcp_on_open, if dened, is called when a session is opened. See the
description below.
tcp_close [-qn] [ -a | -l sess,... | sess ... ]
Close the named sessions, or the current session if none is given, or all open sessions if
-a is given. The options -l and -s are both handled for consistency with tcp_open,
although the latter is redundant.
If the session being closed is the current one, $TCP_SESS is unset, leaving no current
session, even if there are other sessions still open.
If the session was opened with tcp_open -f, the le descriptor is closed so long as
it is in the range 0 to 9 accessible directly from the command line. If the option -n
is given, no attempt will be made to close le descriptors in this case. The -n option
is not used for genuine ztcp session; the le descriptors are always closed with the
session.
If the option -q is given, no informational messages will be printed.
tcp_read [-bdq] [ -t TO ] [ -T TO ]
[ -a | -u fd ... | -l sess,... | -s sess ...]
Perform a read operation on the current session, or on a list of sessions if any are
given with -u, -l or -s, or all open sessions if the option -a is given. Any of the
Chapter 24: TCP Function System 322
-u, -l or -s options may be repeated or mixed together. The -u option species
a le descriptor directly (only those managed by this system are useful), the other
two specify sessions as described for tcp_open above.
The function checks for new data available on all the sessions listed. Unless the
-b option is given, it will not block waiting for new data. Any one line of data
from any of the available sessions will be read, stored in the parameter $TCP_LINE,
and displayed to standard output unless $TCP_SILENT contains a non-empty string.
When printed to standard output the string $TCP_PROMPT will be shown at the start
of the line; the default form for this includes the name of the session being read.
See below for more information on these parameters. In this mode, tcp_read can
be called repeatedly until it returns status 2 which indicates all pending input from
all specied sessions has been handled.
With the option -b, equivalent to an innite timeout, the function will block until
a line is available to read from one of the specied sessions. However, only a single
line is returned.
The option -d indicates that all pending input should be drained. In this case
tcp_read may process multiple lines in the manner given above; only the last is
stored in $TCP_LINE, but the complete set is stored in the array $tcp_lines. This
is cleared at the start of each call to tcp_read.
The options -t and -T specify a timeout in seconds, which may be a oating point
number for increased accuracy. With -t the timeout is applied before each line
read. With -T, the timeout applies to the overall operation, possibly including
multiple read operations if the option -d is present; without this option, there is no
distinction between -t and -T.
The function does not print informational messages, but if the option -q is given,
no error message is printed for a non-existent session.
A return status of 2 indicates a timeout or no data to read. Any other non-zero
return status indicates some error condition.
See tcp_log for how to control where data is sent by tcp_read.
tcp_send [-cnq] [ -s sess | -l sess,... ] data ...
tcp_send [-cnq] -a data ...
Send the supplied data strings to all the specied sessions in turn. The underlying
operation diers little from a print -r to the sessions le descriptor, although it
attempts to prevent the shell from dying owing to a SIGPIPE caused by an attempt
to write to a defunct session.
The option -c causes tcp_send to behave like cat. It reads lines from standard
input until end of input and sends them in turn to the specied session(s) exactly
as if they were given as data arguments to individual tcp_send commands.
The option -n prevents tcp_send from putting a newline at the end of the data
strings.
The remaining options all behave as for tcp_read.
The data arguments are not further processed once they have been passed to
tcp_send; they are simply passed down to print -r.
If the parameter $TCP_OUTPUT is a non-empty string and logging is enabled then
the data sent to each session will be echoed to the log le(s) with $TCP_OUTPUT in
front where appropriate, much in the manner of $TCP_PROMPT.
Chapter 24: TCP Function System 323
24.2.2 Session Management
tcp_alias [-q] alias=sess ...
tcp_alias [-q] [ alias ] ...
tcp_alias -d [-q] alias ...
This function is not particularly well tested.
The rst form creates an alias for a session name; alias can then be used to refer to
the existing session sess. As many aliases may be listed as required.
The second form lists any aliases specied, or all aliases if none.
The third form deletes all the aliases listed. The underlying sessions are not aected.
The option -q suppresses an inconsistently chosen subset of error messages.
tcp_log [-asc] [ -n | -N ] [ logle ]
With an argument logle, all future input from tcp_read will be logged to the
named le. Unless -a (append) is given, this le will rst be truncated or created
empty. With no arguments, show the current status of logging.
With the option -s, per-session logging is enabled. Input from tcp_read is output
to the le logle.sess. As the session is automatically discriminated by the lename,
the contents are raw (no $TCP_PROMPT). The option -a applies as above. Per-session
logging and logging of all data in one le are not mutually exclusive.
The option -c closes all logging, both complete and per-session logs.
The options -n and -N respectively turn o or restore output of data read
by tcp_read to standard output; hence tcp_log -cn turns o all output by
tcp_read.
The function is purely a convenient front end to setting the parameters $TCP_LOG,
$TCP_LOG_SESS, $TCP_SILENT, which are described below.
tcp_rename old new
Rename session old to session new. The old name becomes invalid.
tcp_sess [ sess [ command ... ] ]
With no arguments, list all the open sessions and associated le descriptors. The
current session is marked with a star. For use in functions, direct access to the pa-
rameters $tcp_by_name, $tcp_by_fd and $TCP_SESS is probably more convenient;
see below.
With a sess argument, set the current session to sess. This is equivalent to changing
$TCP_SESS directly.
With additional arguments, temporarily set the current session while executing the
string command .... The rst argument is re-evaluated so as to expand aliases etc.,
but the remaining arguments are passed through as the appear to tcp_sess. The
original session is restored when tcp_sess exits.
24.2.3 Advanced I/O
tcp_command send-options ... send-arguments ...
This is a convenient front-end to tcp_send. All arguments are passed to tcp_send,
then the function pauses waiting for data. While data is arriving at least every
$TCP_TIMEOUT (default 0.3) seconds, data is handled and printed out according to
the current settings. Status 0 is always returned.
This is generally only useful for interactive use, to prevent the display becoming frag-
mented by output returned from the connection. Within a programme or function
it is generally better to handle reading data by a more explicit method.
Chapter 24: TCP Function System 324
tcp_expect [ -q ] [ -p var | -P var ] [ -t to | -T TO]
[ -a | -s sess ... | -l sess,... ] pattern ...
Wait for input matching any of the given patterns from any of the specied sessions.
Input is ignored until an input line matches one of the given patterns; at this point
status zero is returned, the matching line is stored in $TCP_LINE, and the full set of
lines read during the call to tcp_expect is stored in the array $tcp_expect_lines.
Sessions are specied in the same way as tcp_read: the default is to use the current
session, otherwise the sessions specied by -a, -s, or -l are used.
Each pattern is a standard zsh extended-globbing pattern; note that it needs to
be quoted to avoid it being expanded immediately by lename generation. It must
match the full line, so to match a substring there must be a * at the start and
end. The line matched against includes the $TCP_PROMPT added by tcp_read. It is
possible to include the globbing ags #b or #m in the patterns to make backrefer-
ences available in the parameters $MATCH, $match, etc., as described in the base zsh
documentation on pattern matching.
Unlike tcp_read, the default behaviour of tcp_expect is to block indenitely until
the required input is found. This can be modied by specifying a timeout with
-t or -T; these function as in tcp_read, specifying a per-read or overall timeout,
respectively, in seconds, as an integer or oating-point number. As tcp_read, the
function returns status 2 if a timeout occurs.
The function returns as soon as any one of the patterns given match. If the caller
needs to know which of the patterns matched, the option -p var can be used; on
return, $var is set to the number of the pattern using ordinary zsh indexing, i.e. the
rst is 1, and so on. Note the absence of a $ in front of var. To avoid clashes, the
parameter cannot begin with _expect. The index -1 is used if there is a timeout
and 0 if there is no match.
The option -P var works similarly to -p, but instead of numerical indexes the regular
arguments must begin with a prex followed by a colon: that prex is then used as
a tag to which var is set when the argument matches. The tag timeout is used if
there is a timeout and the empty string if there is no match. Note it is acceptable
for dierent arguments to start with the same prex if the matches do not need to
be distinguished.
The option -q is passed directly down to tcp_read.
As all input is done via tcp_read, all the usual rules about output of lines read
apply. One exception is that the parameter $tcp_lines will only reect the line
actually matched by tcp_expect; use $tcp_expect_lines for the full set of lines
read during the function call.
tcp_proxy
This is a simple-minded function to accept a TCP connection and execute a com-
mand with I/O redirected to the connection. Extreme caution should be taken as
there is no security whatsoever and this can leave your computer open to the world.
Ideally, it should only be used behind a rewall.
The rst argument is a TCP port on which the function will listen.
The remaining arguments give a command and its arguments to execute with stan-
dard input, standard output and standard error redirected to the le descriptor on
which the TCP session has been accepted. If no command is given, a new zsh is
started. This gives everyone on your network direct access to your account, which
in many cases will be a bad thing.
The command is run in the background, so tcp_proxy can then accept new connec-
tions. It continues to accept new connections until interrupted.
Chapter 24: TCP Function System 325
tcp_spam [-ertv] [ -a | -s sess | -l sess,... ] cmd ...
Execute cmd ... for each session in turn. Note this executes the command and
arguments; it does not send the command line as data unless the -t (transmit)
option is given.
The sessions may be selected explicitly with the standard -a, -s or -l options, or
may be chosen implicitly. If none of the three options is given the rules are: rst, if
the array $tcp_spam_list is set, this is taken as the list of sessions, otherwise all
sessions are taken. Second, any sessions given in the array $tcp_no_spam_list are
removed from the list of sessions.
Normally, any sessions added by the -a ag or when all sessions are chosen implic-
itly are spammed in alphabetic order; sessions given by the $tcp_spam_list array
or on the command line are spammed in the order given. The -r ag reverses the
order however it was arrived it.
The -v ag species that a $TCP_PROMPT will be output before each session. This
is output after any modication to TCP SESS by the user-dened tcp_on_spam
function described below. (Obviously that function is able to generate its own
output.)
If the option -e is present, the line given as cmd ... is executed using eval, otherwise
it is executed without any further processing.
tcp_talk This is a fairly simple-minded attempt to force input to the line editor to go straight
to the default TCP SESSION.
An escape string, $TCP_TALK_ESCAPE, default :, is used to allow access to normal
shell operation. If it is on its own at the start of the line, or followed only by
whitespace, the line editor returns to normal operation. Otherwise, the string and
any following whitespace are skipped and the remainder of the line executed as shell
input without any change of the line editors operating mode.
The current implementation is somewhat decient in terms of use of the command
history. For this reason, many users will prefer to use some form of alternative
approach for sending data easily to the current session. One simple approach is to
alias some special character (such as %) to tcp_command --.
tcp_wait The sole argument is an integer or oating point number which gives the seconds
to delay. The shell will do nothing for that period except wait for input on all TCP
sessions by calling tcp_read -a. This is similar to the interactive behaviour at the
command prompt when zle handlers are installed.
24.2.4 One-shot le transfer
tcp_point port
tcp_shoot host port
This pair of functions provide a simple way to transfer a le between two hosts
within the shell. Note, however, that bulk data transfer is currently done using
cat. tcp_point reads any data arriving at port and sends it to standard output;
tcp_shoot connects to port on host and sends its standard input. Any unused port
may be used; the standard mechanism for picking a port is to think of a random
four-digit number above 1024 until one works.
To transfer a le from host woodcock to host springes, on springes:
tcp_point 8091 >output_file
and on woodcock:
tcp_shoot springes 8091 <input_file
Chapter 24: TCP Function System 326
As these two functions do not require tcp_open to set up a TCP connection rst,
they may need to be autoloaded separately.
24.3 TCP User-dened Functions
Certain functions, if dened by the user, will be called by the function system in certain contexts.
This facility depends on the module zsh/parameter, which is usually available in interactive
shells as the completion system depends on it. None of the functions need be dened; they
simply provide convenient hooks when necessary.
Typically, these are called after the requested action has been taken, so that the various param-
eters will reect the new state.
tcp_on_alias alias fd
When an alias is dened, this function will be called with two arguments: the name
of the alias, and the le descriptor of the corresponding session.
tcp_on_awol sess fd
If the function tcp_fd_handler is handling input from the line editor and detects
that the le descriptor is no longer reusable, by default it removes it from the list
of le descriptors handled by this method and prints a message. If the function
tcp_on_awol is dened it is called immediately before this point. It may return
status 100, which indicates that the normal handling should still be performed;
any other return status indicates that no further action should be taken and the
tcp_fd_handler should return immediately with the given status. Typically the
action of tcp_on_awol will be to close the session.
The variable TCP_INVALIDATE_ZLE will be a non-empty string if it is necessary to
invalidate the line editor display using zle -I before printing output from the
function.
(AWOL is military jargon for absent without leave or some variation. It has no
pre-existing technical meaning known to the author.)
tcp_on_close sess fd
This is called with the name of a session being closed and the le descriptor which
corresponded to that session. Both will be invalid by the time the function is called.
tcp_on_open sess fd
This is called after a new session has been dened with the session name and le
descriptor as arguments. If it returns a non-zero status, opening the session is
assumed to fail and the session is closed again; however, tcp_open will continue to
attempt to open any remaining sessions given on the command line.
tcp_on_rename oldsess fd newsess
This is called after a session has been renamed with the three arguments old session
name, le descriptor, new session name.
tcp_on_spam sess command ...
This is called once for each session spammed, just before a command is executed
for a session by tcp_spam. The arguments are the session name followed by the
command list to be executed. If tcp_spam was called with the option -t, the rst
command will be tcp_send.
This function is called after $TCP_SESS is set to reect the session to be spammed,
but before any use of it is made. Hence it is possible to alter the value of $TCP_SESS
within this function. For example, the session arguments to tcp_spam could include
extra information to be stripped o and processed in tcp_on_spam.
Chapter 24: TCP Function System 327
If the function sets the parameter $REPLY to done, the command line is not exe-
cuted; in addition, no prompt is printed for the -v option to tcp_spam.
tcp_on_unalias alias fd
This is called with the name of an alias and the corresponding sessions le descriptor
after an alias has been deleted.
24.4 TCP Utility Functions
The following functions are used by the TCP function system but will rarely if ever need to be
called directly.
tcp_fd_handler
This is the function installed by tcp_open for handling input from within the line
editor, if that is required. It is in the format documented for the builtin zle -F
in Section 18.3 [Zle Builtins], page 146 .
While active, the function sets the parameter TCP_HANDLER_ACTIVE to 1. This allows
shell code called internally (for example, by setting tcp_on_read) to tell if is being
called when the shell is otherwise idle at the editor prompt.
tcp_output [ -q ] -P prompt -F fd -S sess
This function is used for both logging and handling output to standard output, from
within tcp_read and (if $TCP_OUTPUT is set) tcp_send.
The prompt to use is specied by -P; the default is the empty string. It can contain:
%c Expands to 1 if the session is the current session, otherwise 0. Used
with ternary expressions such as %(c.-.+) to output + for the current
session and - otherwise.
%f Replaced by the sessions le descriptor.
%s Replaced by the session name.
%% Replaced by a single %.
The option -q suppresses output to standard output, but not to any log les which
are congured.
The -S and -F options are used to pass in the session name and le descriptor for
possible replacement in the prompt.
24.5 TCP User Parameters
Parameters follow the usual convention that uppercase is used for scalars and integers, while
lowercase is used for normal and associative array. It is always safe for user code to read these
parameters. Some parameters may also be set; these are noted explicitly. Others are included
in this group as they are set by the function system for the users benet, i.e. setting them is
typically not useful but is benign.
It is often also useful to make settable parameters local to a function. For example, local
TCP_SILENT=1 species that data read during the function call will not be printed to standard
output, regardless of the setting outside the function. Likewise, local TCP_SESS=sess sets a
session for the duration of a function, and local TCP_PROMPT= species that no prompt is used
for input during the function.
tcp_expect_lines
Array. The set of lines read during the last call to tcp_expect, including the last
($TCP_LINE).
Chapter 24: TCP Function System 328
tcp_filter
Array. May be set directly. A set of extended globbing patterns which, if matched in
tcp_output, will cause the line not to be printed to standard output. The patterns
should be dened as described for the arguments to tcp_expect. Output of line to
log les is not aected.
TCP_HANDLER_ACTIVE
Scalar. Set to 1 within tcp_fd_handler to indicate to functions called recursively
that they have been called during an editor session. Otherwise unset.
TCP_LINE The last line read by tcp_read, and hence also tcp_expect.
TCP_LINE_FD
The le descriptor from which $TCP_LINE was read. ${tcp_by_fd[$TCP_LINE_FD]}
will give the corresponding session name.
tcp_lines
Array. The set of lines read during the last call to tcp_read, including the last
($TCP_LINE).
TCP_LOG May be set directly, although it is also controlled by tcp_log. The name of a le to
which output from all sessions will be sent. The output is proceeded by the usual
$TCP_PROMPT. If it is not an absolute path name, it will follow the users current
directory.
TCP_LOG_SESS
May be set directly, although it is also controlled by tcp_log. The prex for a set
of les to which output from each session separately will be sent; the full lename
is ${TCP_LOG_SESS}.sess. Output to each le is raw; no prompt is added. If it is
not an absolute path name, it will follow the users current directory.
tcp_no_spam_list
Array. May be set directly. See tcp_spam for how this is used.
TCP_OUTPUT
May be set directly. If a non-empty string, any data sent to a session by tcp_send
will be logged. This parameter gives the prompt to be used in a le specied by
$TCP_LOG but not in a le generated from $TCP_LOG_SESS. The prompt string has
the same format as TCP_PROMPT and the same rules for its use apply.
TCP_PROMPT
May be set directly. Used as the prex for data read by tcp_read which is printed
to standard output or to the log le given by $TCP_LOG, if any. Any %s, %f or
%% occurring in the string will be replaced by the name of the session, the sessions
underlying le descriptor, or a single %, respectively. The expression %c expands to
1 if the session being read is the current session, else 0; this is most useful in ternary
expressions such as %(c.-.+) which outputs + if the session is the current one,
else -.
If the prompt starts with %P, this is stripped and the complete result of the previous
stage is passed through standard prompt %-style formatting before being output.
TCP_READ_DEBUG
May be set directly. If this has non-zero length, tcp_read will give some limited
diagnostics about data being read.
TCP_SECONDS_START
This value is created and initialised to zero by tcp open.
Chapter 24: TCP Function System 329
The functions tcp_read and tcp_expect use the shells SECONDS parameter for their
own timing purposes. If that parameter is not of oating point type on entry to
one of the functions, it will create a local parameter SECONDS which is oating point
and set the parameter TCP_SECONDS_START to the previous value of $SECONDS. If
the parameter is already oating point, it is used without a local copy being created
and TCP_SECONDS_START is not set. As the global value is zero, the shell elapsed
time is guaranteed to be the sum of $SECONDS and $TCP_SECONDS_START.
This can be avoided by setting SECONDS globally to a oating point value using
typeset -F SECONDS; then the TCP functions will never make a local copy and
never set TCP_SECONDS_START to a non-zero value.
TCP_SESS May be set directly. The current session; must refer to one of the sessions established
by tcp_open.
TCP_SILENT
May be set directly, although it is also controlled by tcp_log. If of non-zero length,
data read by tcp_read will not be written to standard output, though may still be
written to a log le.
tcp_spam_list
Array. May be set directly. See the description of the function tcp_spam for how
this is used.
TCP_TALK_ESCAPE
May be set directly. See the description of the function tcp_talk for how this is
used.
TCP_TIMEOUT
May be set directly. Currently this is only used by the function tcp_command, see
above.
24.6 TCP User-dened Parameters
The following parameters are not set by the function system, but have a special eect if set by
the user.
tcp_on_read
This should be an associative array; if it is not, the behaviour is undened. Each key
is the name of a shell function or other command, and the corresponding value is a
shell pattern (using EXTENDED_GLOB). Every line read from a TCP session directly
or indirectly using tcp_read (which includes lines read by tcp_expect) is compared
against the pattern. If the line matches, the command given in the key is called
with two arguments: the name of the session from which the line was read, and the
line itself.
If any function called to handle a line returns a non-zero status, the line is not output.
Thus a tcp_on_read handler containing only the instruction return 1 can be used
to suppress output of particular lines (see, however, tcp_filter above). However,
the line is still stored in TCP_LINE and tcp_lines; this occurs after all tcp_on_read
processing.
24.7 TCP Utility Parameters
These parameters are controlled by the function system; they may be read directly, but should
not usually be set by user code.
Chapter 25: Zftp Function System 330
tcp_aliases
Associative array. The keys are the names of sessions established with tcp_open;
each value is a space-separated list of aliases which refer to that session.
tcp_by_fd
Associative array. The keys are session le descriptors; each value is the name of
that session.
tcp_by_name
Associative array. The keys are the names of sessions; each value is the le descriptor
associated with that session.
24.8 TCP Examples
Here is a trivial example using a remote calculator.
TO create a calculator server on port 7337 (see the dc manual page for quite how infuriating
the underlying command is):
tcp_proxy 7337 dc
To connect to this from the same host with a session also named dc:
tcp_open localhost 7337 dc
To send a command to the remote session and wait a short while for output (assuming dc is the
current session):
tcp_command 2 4 + p
To close the session:
tcp_close
The tcp_proxy needs to be killed to be stopped. Note this will not usually kill any connections
which have already been accepted, and also that the port is not immediately available for reuse.
The following chunk of code puts a list of sessions into an xterm header, with the current session
followed by a star.
print -n "\033]2;TCP:" ${(k)tcp_by_name:/$TCP_SESS/$TCP_SESS\*} "\a"
24.9 TCP Bugs
The function tcp_read uses the shells normal read builtin. As this reads a complete line at
once, data arriving without a terminating newline can cause the function to block indenitely.
Though the function suite works well for interactive use and for data arriving in small amounts,
the performance when large amounts of data are being exchanged is likely to be extremely poor.
25 Zftp Function System
25.1 Description
This describes the set of shell functions supplied with the source distribution as an interface to
the zftp builtin command, allowing you to perform FTP operations from the shell command
line or within functions or scripts. The interface is similar to a traditional FTP client (e.g.
the ftp command itself, see man page ftp(1)), but as it is entirely done within the shell all
the familiar completion, editing and globbing features, and so on, are present, and macros are
particularly simple to write as they are just ordinary shell functions.
Chapter 25: Zftp Function System 331
The prerequisite is that the zftp command, as described in Section 22.28 [The zsh/zftp Module],
page 294 , must be available in the version of zsh installed at your site. If the shell is congured
to load new commands at run time, it probably is: typing zmodload zsh/zftp will make sure
(if that runs silently, it has worked). If this is not the case, it is possible zftp was linked into the
shell anyway: to test this, type which zftp and if zftp is available you will get the message
zftp: shell built-in command.
Commands given directly with zftp builtin may be interspersed between the functions in this
suite; in a few cases, using zftp directly may cause some of the status information stored in shell
parameters to become invalid. Note in particular the description of the variables $ZFTP_TMOUT,
$ZFTP_PREFS and $ZFTP_VERBOSE for zftp.
25.2 Installation
You should make sure all the functions from the Functions/Zftp directory of the source dis-
tribution are available; they all begin with the two letters zf. They may already have been
installed on your system; otherwise, you will need to nd them and copy them. The directory
should appear as one of the elements of the $fpath array (this should already be the case if they
were installed), and at least the function zfinit should be autoloaded; it will autoload the rest.
Finally, to initialize the use of the system you need to call the zfinit function. The follow-
ing code in your .zshrc will arrange for this; assume the functions are stored in the directory
~/myfns:
fpath=(~/myfns $fpath)
autoload -U zfinit
zfinit
Note that zfinit assumes you are using the zmodload method to load the zftp command.
If it is already built into the shell, change zfinit to zfinit -n. It is helpful (though not
essential) if the call to zfinit appears after any code to initialize the new completion system,
else unnecessary compctl commands will be given.
25.3 Functions
The sequence of operations in performing a le transfer is essentially the same as that in a
standard FTP client. Note that, due to a quirk of the shells getopts builtin, for those functions
that handle options you must use -- rather than - to ensure the remaining arguments are
treated literally (a single - is treated as an argument).
25.3.1 Opening a connection
zfparams [ host [ user [ password ... ] ] ]
Set or show the parameters for a future zfopen with no arguments. If no arguments
are given, the current parameters are displayed (the password will be shown as a
line of asterisks). If a host is given, and either the user or password is not, they
will be prompted for; also, any parameter given as ? will be prompted for, and if
the ? is followed by a string, that will be used as the prompt. As zfopen calls
zfparams to store the parameters, this usually need not be called directly.
A single argument - will delete the stored parameters. This will also cause the
memory of the last directory (and so on) on the other host to be deleted.
zfopen [ -1 ] [ host [ user [ password [ account ] ] ] ]
If host is present, open a connection to that host under username user with password
password (and, on the rare occasions when it is necessary, account account). If a
necessary parameter is missing or given as ? it will be prompted for. If host is not
present, use a previously stored set of parameters.
Chapter 25: Zftp Function System 332
If the command was successful, and the terminal is compatible with xterm or is sun-
cmd, a summary will appear in the title bar, giving the local host:directory and
the remote host:directory; this is handled by the function zftp_chpwd, described
below.
Normally, the host, user and password are internally recorded for later re-opening,
either by a zfopen with no arguments, or automatically (see below). With the
option -1, no information is stored. Also, if an open command with arguments
failed, the parameters will not be retained (and any previous parameters will also be
deleted). A zfopen on its own, or a zfopen -1, never alters the stored parameters.
Both zfopen and zfanon (but not zfparams) understand URLs of the form
ftp://host/path... as meaning to connect to the host, then change directory to
path (which must be a directory, not a le). The ftp:// can be omitted; the
trailing / is enough to trigger recognition of the path. Note prexes other than
ftp: are not recognized, and that all characters after the rst slash beyond host
are signicant in path.
zfanon [ -1 ] host
Open a connection host for anonymous FTP. The username used is anonymous.
The password (which will be reported the rst time) is generated as user@host; this
is then stored in the shell parameter $EMAIL_ADDR which can alternatively be set
manually to a suitable string.
25.3.2 Directory management
zfcd [ dir ]
zfcd -
zfcd old new
Change the current directory on the remote server: this is implemented to have
many of the features of the shell builtin cd.
In the rst form with dir present, change to the directory dir. The command zfcd
.. is treated specially, so is guaranteed to work on non-UNIX servers (note this is
handled internally by zftp). If dir is omitted, has the eect of zfcd ~.
The second form changes to the directory previously current.
The third form attempts to change the current directory by replacing the rst oc-
currence of the string old with the string new in the current directory.
Note that in this command, and indeed anywhere a remote lename is expected,
the string which on the local host corresponds to ~ is converted back to a ~
before being passed to the remote machine. This is convenient because of the way
expansion is performed on the command line before zfcd receives a string. For
example, suppose the command is zfcd ~/foo. The shell will expand this to a
full path such as zfcd /home/user2/pws/foo. At this stage, zfcd recognises the
initial path as corresponding to ~ and will send the directory to the remote host
as ~/foo, so that the ~ will be expanded by the server to the correct remote
host directory. Other named directories of the form ~name are not treated in this
fashion.
zfhere Change directory on the remote server to the one corresponding to the current local
directory, with special handling of ~ as in zfcd. For example, if the current local
directory is ~/foo/bar, then zfhere performs the eect of zfcd ~/foo/bar.
zfdir [ -rfd ] [ - ] [ dir-options ] [ dir ]
Produce a long directory listing. The arguments dir-options and dir are passed
directly to the server and their eect is implementation dependent, but specifying
Chapter 25: Zftp Function System 333
a particular remote directory dir is usually possible. The output is passed through
a pager given by the environment variable $PAGER, or more if that is not set.
The directory is usually cached for re-use. In fact, two caches are maintained. One
is for use when there is no dir-options or dir, i.e. a full listing of the current remote
directory; it is ushed when the current remote directory changes. The other is kept
for repeated use of zfdir with the same arguments; for example, repeated use of
zfdir /pub/gnu will only require the directory to be retrieved on the rst call.
Alternatively, this cache can be re-viewed with the -r option. As relative directories
will confuse zfdir, the -f option can be used to force the cache to be ushed before
the directory is listed. The option -d will delete both caches without showing a
directory listing; it will also delete the cache of le names in the current remote
directory, if any.
zfls [ ls-options ] [ dir ]
List les on the remote server. With no arguments, this will produce a simple list
of le names for the current remote directory. Any arguments are passed directly
to the server. No pager and no caching is used.
25.3.3 Status commands
zftype [ type ]
With no arguments, show the type of data to be transferred, usually ASCII or
binary. With an argument, change the type: the types A or ASCII for ASCII data
and B or BINARY, I or IMAGE for binary data are understood case-insensitively.
zfstat [ -v ]
Show the status of the current or last connection, as well as the status of some of
zftps status variables. With the -v option, a more verbose listing is produced by
querying the server for its version of events, too.
25.3.4 Retrieving les
The commands for retrieving les all take at least two options. -G suppresses remote lename
expansion which would otherwise be performed (see below for a more detailed description of
that). -t attempts to set the modication time of the local le to that of the remote le: see
the description of the function zfrtime below for more information.
zfget [ -Gtc ] file1 ...
Retrieve all the listed les le1 ... one at a time from the remote server. If a le
contains a /, the full name is passed to the remote server, but the le is stored
locally under the name given by the part after the nal /. The option -c (cat)
forces all les to be sent as a single stream to standard output; in this case the -t
option has no eect.
zfuget [ -Gvst ] file1 ...
As zfget, but only retrieve les where the version on the remote server is newer (has
a later modication time), or where the local le does not exist. If the remote le
is older but the les have dierent sizes, or if the sizes are the same but the remote
le is newer, the user will usually be queried. With the option -s, the command
runs silently and will always retrieve the le in either of those two cases. With the
option -v, the command prints more information about the les while it is working
out whether or not to transfer them.
zfcget [ -Gt ] file1 ...
As zfget, but if any of the local les exists, and is shorter than the corresponding
remote le, the command assumes that it is the result of a partially completed
Chapter 25: Zftp Function System 334
transfer and attempts to transfer the rest of the le. This is useful on a poor
connection which keeps failing.
Note that this requires a commonly implemented, but non-standard, version of the
FTP protocol, so is not guaranteed to work on all servers.
zfgcp [ -Gt ] remote-file local-file
zfgcp [ -Gt ] rfile1 ... ldir
This retrieves les from the remote server with arguments behaving similarly to the
cp command.
In the rst form, copy remote-le from the server to the local le local-le.
In the second form, copy all the remote les rle1 ... into the local directory ldir
retaining the same basenames. This assumes UNIX directory semantics.
25.3.5 Sending les
zfput [ -r ] file1 ...
Send all the le1 ... given separately to the remote server. If a lename contains a
/, the full lename is used locally to nd the le, but only the basename is used
for the remote le name.
With the option -r, if any of the les are directories they are sent recursively with
all their subdirectories, including les beginning with .. This requires that the
remote machine understand UNIX le semantics, since / is used as a directory
separator.
zfuput [ -vs ] file1 ...
As zfput, but only send les which are newer than their local equivalents, or if the
remote le does not exist. The logic is the same as for zfuget, but reversed between
local and remote les.
zfcput file1 ...
As zfput, but if any remote le already exists and is shorter than the local equiva-
lent, assume it is the result of an incomplete transfer and send the rest of the le to
append to the existing part. As the FTP append command is part of the standard
set, this is in principle more likely to work than zfcget.
zfpcp local-file remote-file
zfpcp lfile1 ... rdir
This sends les to the remote server with arguments behaving similarly to the cp
command.
With two arguments, copy local-le to the server as remote-le.
With more than two arguments, copy all the local les lle1 ... into the existing
remote directory rdir retaining the same basenames. This assumes UNIX directory
semantics.
A problem arises if you attempt to use zfpcp lle1 rdir, i.e. the second form of
copying but with two arguments, as the command has no simple way of knowing if
rdir corresponds to a directory or a lename. It attempts to resolve this in various
ways. First, if the rdir argument is . or .. or ends in a slash, it is assumed to be
a directory. Secondly, if the operation of copying to a remote le in the rst form
failed, and the remote server sends back the expected failure code 553 and a reply
including the string Is a directory, then zfpcp will retry using the second form.
25.3.6 Closing the connection
zfclose Close the connection.
Chapter 25: Zftp Function System 335
25.3.7 Session management
zfsession [ -lvod ] [ sessname ]
Allows you to manage multiple FTP sessions at once. By default, connections take
place in a session called default; by giving the command zfsession sessname
you can change to a new or existing session with a name of your choice. The
new session remembers its own connection, as well as associated shell parameters,
and also the host/user parameters set by zfparams. Hence you can have dierent
sessions set up to connect to dierent hosts, each remembering the appropriate host,
user and password.
With no arguments, zfsession prints the name of the current session; with the
option -l it lists all sessions which currently exist, and with the option -v it gives
a verbose list showing the host and directory for each session, where the current
session is marked with an asterisk. With -o, it will switch to the most recent
previous session.
With -d, the given session (or else the current one) is removed; everything to do with
it is completely forgotten. If it was the only session, a new session called default
is created and made current. It is safest not to delete sessions while background
commands using zftp are active.
zftransfer sess1:le1 sess2:le2
Transfer les between two sessions; no local copy is made. The le is read from
the session sess1 as le1 and written to session sess2 as le le2; le1 and le2
may be relative to the current directories of the session. Either sess1 or sess2 may
be omitted (though the colon should be retained if there is a possibility of a colon
appearing in the le name) and defaults to the current session; le2 may be omitted
or may end with a slash, in which case the basename of le1 will be added. The
sessions sess1 and sess2 must be distinct.
The operation is performed using pipes, so it is required that the connections still be
valid in a subshell, which is not the case under versions of some operating systems,
presumably due to a system bug.
25.3.8 Bookmarks
The two functions zfmark and zfgoto allow you to bookmark the present location (host, user
and directory) of the current FTP connection for later use. The le to be used for storing and
retrieving bookmarks is given by the parameter $ZFTP_BMFILE; if not set when one of the two
functions is called, it will be set to the le .zfbkmarks in the directory where your zsh startup
les live (usually ~).
zfmark [ bookmark ]
If given an argument, mark the current host, user and directory under the name
bookmark for later use by zfgoto. If there is no connection open, use the values
for the last connection immediately before it was closed; it is an error if there was
none. Any existing bookmark under the same name will be silently replaced.
If not given an argument, list the existing bookmarks and the points to which they
refer in the form user@host:directory; this is the format in which they are stored,
and the le may be edited directly.
zfgoto [ -n ] bookmark
Return to the location given by bookmark, as previously set by zfmark. If the
location has user ftp or anonymous, open the connection with zfanon, so that
no password is required. If the user and host parameters match those stored for
Chapter 25: Zftp Function System 336
the current session, if any, those will be used, and again no password is required.
Otherwise a password will be prompted for.
With the option -n, the bookmark is taken to be a nickname stored by the ncftp
program in its bookmark le, which is assumed to be ~/.ncftp/bookmarks. The
function works identically in other ways. Note that there is no mechanism for adding
or modifying ncftp bookmarks from the zftp functions.
25.3.9 Other functions
Mostly, these functions will not be called directly (apart from zfinit), but are described here
for completeness. You may wish to alter zftp_chpwd and zftp_progress, in particular.
zfinit [ -n ]
As described above, this is used to initialize the zftp function system. The -n option
should be used if the zftp command is already built into the shell.
zfautocheck [ -dn ]
This function is called to implement automatic reopening behaviour, as described in
more detail below. The options must appear in the rst argument; -n prevents the
command from changing to the old directory, while -d prevents it from setting the
variable do_close, which it otherwise does as a ag for automatically closing the
connection after a transfer. The host and directory for the last session are stored
in the variable $zflastsession, but the internal host/user/password parameters
must also be correctly set.
zfcd_match prefix suffix
This performs matching for completion of remote directory names. If the remote
server is UNIX, it will attempt to persuade the server to list the remote directory
with subdirectories marked, which usually works but is not guaranteed. On other
hosts it simply calls zfget_match and hence completes all les, not just directories.
On some systems, directories may not even look like lenames.
zfget_match prefix suffix
This performs matching for completion of remote lenames. It caches les for the
current directory (only) in the shell parameter $zftp_fcache. It is in the form to be
called by the -K option of compctl, but also works when called from a widget-style
completion function with prex and sux set appropriately.
zfrglob varname
Perform remote globbing, as describes in more detail below. varname is the name
of a variable containing the pattern to be expanded; if there were any matches, the
same variable will be set to the expanded set of lenames on return.
zfrtime lfile rfile [ time ]
Set the local le lle to have the same modication time as the remote le rle,
or the explicit time time in FTP format CCYYMMDDhhmmSS for the GMT timezone.
This uses the shells zsh/datetime module to perform the conversion from GMT
to local time.
zftp_chpwd
This function is called every time a connection is opened, or closed, or the remote di-
rectory changes. This version alters the title bar of an xterm-compatible or sun-cmd
terminal emulator to reect the local and remote hostnames and current directories.
It works best when combined with the function chpwd. In particular, a function of
the form
chpwd() {
Chapter 25: Zftp Function System 337
if [[ -n $ZFTP_USER ]]; then
zftp_chpwd
else
# usual chpwd e.g put host:directory in title bar
fi
}
ts in well.
zftp_progress
This function shows the status of the transfer. It will not write anything unless
the output is going to a terminal; however, if you transfer les in the background,
you should turn o progress reports by hand using zstyle :zftp:* progress
none. Note also that if you alter it, any output must be to standard error, as
standard output may be a le being received. The form of the progress meter,
or whether it is used at all, can be congured without altering the function, as
described in the next section.
zffcache This is used to implement caching of les in the current directory for each session
separately. It is used by zfget_match and zfrglob.
25.4 Miscellaneous Features
25.4.1 Conguration
Various styles are available using the standard shell style mechanism, described in Section 22.34
[The zsh/zutil Module], page 304. Briey, the command zstyle :zftp:* style value ....
denes the style to have value value; more than one value may be given, although that is not
useful in the cases described here. These values will then be used throughout the zftp function
system. For more precise control, the rst argument, which gives a context in which the style
applies, can be modied to include a particular function, as for example :zftp:zfget: the
style will then have the given value only in the zfget function. Values for the same style in
dierent contexts may be set; the most specic function will be used, where strings are held to
be more specic than patterns, and longer patterns and shorter patterns. Note that only the top
level function name, as called by the user, is used; calling of lower level functions is transparent
to the user. Hence modications to the title bar in zftp_chpwd use the contexts :zftp:zfopen,
:zftp:zfcd, etc., depending where it was called from. The following styles are understood:
progress Controls the way that zftp_progress reports on the progress of a transfer. If
empty, unset, or none, no progress report is made; if bar a growing bar of inverse
video is shown; if percent (or any other string, though this may change in future),
the percentage of the le transferred is shown. The bar meter requires that the
width of the terminal be available via the $COLUMNS parameter (normally this is
set automatically). If the size of the le being transferred is not available, bar and
percent meters will simply show the number of bytes transferred so far.
When zfinit is run, if this style is not dened for the context :zftp:*, it will be
set to bar.
update Species the minimum time interval between updates of the progress meter in sec-
onds. No update is made unless new data has been received, so the actual time
interval is limited only by $ZFTP_TIMEOUT.
As described for progress, zfinit will force this to default to 1.
Chapter 25: Zftp Function System 338
remote-glob
If set to 1, yes or true, lename generation (globbing) is performed on the remote
machine instead of by zsh itself; see below.
titlebar If set to 1, yes or true, zftp_chpwd will put the remote host and remote directory
into the titlebar of terminal emulators such as xterm or sun-cmd that allow this.
As described for progress, zfinit will force this to default to 1.
chpwd If set to 1 yes or true, zftp_chpwd will call the function chpwd when a connection
is closed. This is useful if the remote host details were put into the terminal title
bar by zftp_chpwd and your usual chpwd also modies the title bar.
When zfinit is run, it will determine whether chpwd exists and if so it will set the
default value for the style to 1 if none exists already.
Note that there is also an associative array zfconfig which contains values used by the function
system. This should not be modied or overwritten.
25.4.2 Remote globbing
The commands for retrieving les usually perform lename generation (globbing) on their argu-
ments; this can be turned o by passing the option -G to each of the commands. Normally this
operates by retrieving a complete list of les for the directory in question, then matching these
locally against the pattern supplied. This has the advantage that the full range of zsh patterns
(respecting the setting of the option EXTENDED_GLOB) can be used. However, it means that the
directory part of a lename will not be expanded and must be given exactly. If the remote
server does not support the UNIX directory semantics, directory handling is problematic and
it is recommended that globbing only be used within the current directory. The list of les in
the current directory, if retrieved, will be cached, so that subsequent globs in the same directory
without an intervening zfcd are much faster.
If the remote-glob style (see above) is set, globbing is instead performed on the remote host:
the server is asked for a list of matching les. This is highly dependent on how the server is
implemented, though typically UNIX servers will provide support for basic glob patterns. This
may in some cases be faster, as it avoids retrieving the entire list of directory contents.
25.4.3 Automatic and temporary reopening
As described for the zfopen command, a subsequent zfopen with no parameters will reopen
the connection to the last host (this includes connections made with the zfanon command).
Opened in this fashion, the connection starts in the default remote directory and will remain
open until explicitly closed.
Automatic re-opening is also available. If a connection is not currently open and a command
requiring a connection is given, the last connection is implicitly reopened. In this case the
directory which was current when the connection was closed again becomes the current directory
(unless, of course, the command given changes it). Automatic reopening will also take place if
the connection was close by the remote server for whatever reason (e.g. a timeout). It is not
available if the -1 option to zfopen or zfanon was used.
Furthermore, if the command issued is a le transfer, the connection will be closed after the
transfer is nished, hence providing a one-shot mode for transfers. This does not apply to
directory changing or listing commands; for example a zfdir may reopen a connection but will
leave it open. Also, automatic closure will only ever happen in the same command as automatic
opening, i.e a zfdir directly followed by a zfget will never close the connection automatically.
Chapter 26: User Contributions 339
Information about the previous connection is given by the zfstat function. So, for example, if
that reports:
Session: default
Not connected.
Last session: ftp.bar.com:/pub/textfiles
then the command zfget file.txt will attempt to reopen a connection to ftp.bar.com, re-
trieve the le /pub/textfiles/file.txt, and immediately close the connection again. On the
other hand, zfcd .. will open the connection in the directory /pub and leave it open.
Note that all the above is local to each session; if you return to a previous session, the connection
for that session is the one which will be reopened.
25.4.4 Completion
Completion of local and remote les, directories, sessions and bookmarks is supported. The
older, compctl-style completion is dened when zfinit is called; support for the new widget-
based completion system is provided in the function Completion/Zsh/Command/_zftp, which
should be installed with the other functions of the completion system and hence should auto-
matically be available.
26 User Contributions
26.1 Description
The Zsh source distribution includes a number of items contributed by the user community.
These are not inherently a part of the shell, and some may not be available in every zsh in-
stallation. The most signicant of these are documented here. For documentation on other
contributed items such as shell functions, look for comments in the function source les.
26.2 Utilities
26.2.1 Accessing On-Line Help
The key sequence ESC h is normally bound by ZLE to execute the run-help widget (see
Chapter 18 [Zsh Line Editor], page 144). This invokes the run-help command with the com-
mand word from the current input line as its argument. By default, run-help is an alias for
the man command, so this often fails when the command word is a shell builtin or a user-dened
function. By redening the run-help alias, one can improve the on-line help provided by the
shell.
The helpfiles utility, found in the Util directory of the distribution, is a Perl program that
can be used to process the zsh manual to produce a separate help le for each shell builtin
and for many other shell features as well. The autoloadable run-help function, found in
Functions/Misc, searches for these helples and performs several other tests to produce the
most complete help possible for the command.
Help les are installed by default to a subdirectory of /usr/share/zsh or
/usr/local/share/zsh.
To create your own help les with helpfiles, choose or create a directory where the individual
command help les will reside. For example, you might choose ~/zsh_help. If you unpacked
the zsh distribution in your home directory, you would use the commands:
Chapter 26: User Contributions 340
mkdir ~/zsh_help
perl ~/zsh-5.0.6/Util/helpfiles ~/zsh_help
The HELPDIR parameter tells run-help where to look for the help les. When unset, it uses the
default installation path. To use your own set of help les, set this to the appropriate path in
one of your startup les:
HELPDIR=~/zsh_help
To use the run-help function, you need to add lines something like the following to your .zshrc
or equivalent startup le:
unalias run-help
autoload run-help
Note that in order for autoload run-help to work, the run-help le must be in one of
the directories named in your fpath array (see Section 15.6 [Parameters Used By The Shell],
page 80). This should already be the case if you have a standard zsh installation; if it is not,
copy Functions/Misc/run-help to an appropriate directory.
26.2.2 Recompiling Functions
If you frequently edit your zsh functions, or periodically update your zsh installation to track
the latest developments, you may nd that function digests compiled with the zcompile builtin
are frequently out of date with respect to the function source les. This is not usually a problem,
because zsh always looks for the newest le when loading a function, but it may cause slower
shell startup and function loading. Also, if a digest le is explicitly used as an element of fpath,
zsh wont check whether any of its source les has changed.
The zrecompile autoloadable function, found in Functions/Misc, can be used to keep function
digests up to date.
zrecompile [ -qt ] [ name ... ]
zrecompile [ -qt ] -p args [ -- args ... ]
This tries to nd *.zwc les and automatically re-compile them if at least one of the
original les is newer than the compiled le. This works only if the names stored
in the compiled les are full paths or are relative to the directory that contains the
.zwc le.
In the rst form, each name is the name of a compiled le or a directory containing
*.zwc les that should be checked. If no arguments are given, the directories and
*.zwc les in fpath are used.
When -t is given, no compilation is performed, but a return status of zero (true)
is set if there are les that need to be re-compiled and non-zero (false) otherwise.
The -q option quiets the chatty output that describes what zrecompile is doing.
Without the -t option, the return status is zero if all les that needed re-compilation
could be compiled and non-zero if compilation for at least one of the les failed.
If the -p option is given, the args are interpreted as one or more sets of arguments
for zcompile, separated by --. For example:
zrecompile -p \
-R ~/.zshrc -- \
-M ~/.zcompdump -- \
~/zsh/comp.zwc ~/zsh/Completion/*/_*
This compiles ~/.zshrc into ~/.zshrc.zwc if that doesnt exist or if it is older than
~/.zshrc. The compiled le will be marked for reading instead of mapping. The
same is done for ~/.zcompdump and ~/.zcompdump.zwc, but this compiled le is
Chapter 26: User Contributions 341
marked for mapping. The last line re-creates the le ~/zsh/comp.zwc if any of the
les matching the given pattern is newer than it.
Without the -p option, zrecompile does not create function digests that do not
already exist, nor does it add new functions to the digest.
The following shell loop is an example of a method for creating function digests for all functions
in your fpath, assuming that you have write permission to the directories:
for ((i=1; i <= $#fpath; ++i)); do
dir=$fpath[i]
zwc=${dir:t}.zwc
if [[ $dir == (.|..) || $dir == (.|..)/* ]]; then
continue
fi
files=($dir/*(N-.))
if [[ -w $dir:h && -n $files ]]; then
files=(${${(M)files%/*/*}#/})
if ( cd $dir:h &&
zrecompile -p -U -z $zwc $files ); then
fpath[i]=$fpath[i].zwc
fi
fi
done
The -U and -z options are appropriate for functions in the default zsh installation fpath; you
may need to use dierent options for your personal function directories.
Once the digests have been created and your fpath modied to refer to them, you can keep
them up to date by running zrecompile with no arguments.
26.2.3 Keyboard Denition
The large number of possible combinations of keyboards, workstations, terminals, emulators, and
window systems makes it impossible for zsh to have built-in key bindings for every situation.
The zkbd utility, found in Functions/Misc, can help you quickly create key bindings for your
conguration.
Run zkbd either as an autoloaded function, or as a shell script:
zsh -f ~/zsh-5.0.6/Functions/Misc/zkbd
When you run zkbd, it rst asks you to enter your terminal type; if the default it oers is
correct, just press return. It then asks you to press a number of dierent keys to determine
characteristics of your keyboard and terminal; zkbd warns you if it nds anything out of the
ordinary, such as a Delete key that sends neither ^H nor ^?.
The keystrokes read by zkbd are recorded as a denition for an associative array named key,
written to a le in the subdirectory .zkbd within either your HOME or ZDOTDIR directory. The
name of the le is composed from the TERM, VENDOR and OSTYPE parameters, joined by hyphens.
You may read this le into your .zshrc or another startup le with the source or . commands,
then reference the key parameter in bindkey commands, like this:
source ${ZDOTDIR:-$HOME}/.zkbd/$TERM-$VENDOR-$OSTYPE
[[ -n ${key[Left]} ]] && bindkey "${key[Left]}" backward-char
[[ -n ${key[Right]} ]] && bindkey "${key[Right]}" forward-char
# etc.
Note that in order for autoload zkbd to work, the zkdb le must be in one of the directo-
ries named in your fpath array (see Section 15.6 [Parameters Used By The Shell], page 80).
Chapter 26: User Contributions 342
This should already be the case if you have a standard zsh installation; if it is not, copy
Functions/Misc/zkbd to an appropriate directory.
26.2.4 Dumping Shell State
Occasionally you may encounter what appears to be a bug in the shell, particularly if you are
using a beta version of zsh or a development release. Usually it is sucient to send a description
of the problem to one of the zsh mailing lists (see Section 2.3 [Mailing Lists], page 2), but
sometimes one of the zsh developers will need to recreate your environment in order to track
the problem down.
The script named reporter, found in the Util directory of the distribution, is provided for this
purpose. (It is also possible to autoload reporter, but reporter is not installed in fpath by
default.) This script outputs a detailed dump of the shell state, in the form of another script
that can be read with zsh -f to recreate that state.
To use reporter, read the script into your shell with the . command and redirect the output
into a le:
. ~/zsh-5.0.6/Util/reporter > zsh.report
You should check the zsh.report le for any sensitive information such as passwords and delete
them by hand before sending the script to the developers. Also, as the output can be voluminous,
its best to wait for the developers to ask for this information before sending it.
You can also use reporter to dump only a subset of the shell state. This is sometimes useful
for creating startup les for the rst time. Most of the output from reporter is far more detailed
than usually is necessary for a startup le, but the aliases, options, and zstyles states may
be useful because they include only changes from the defaults. The bindings state may be
useful if you have created any of your own keymaps, because reporter arranges to dump the
keymap creation commands as well as the bindings for every keymap.
As is usual with automated tools, if you create a startup le with reporter, you should edit
the results to remove unnecessary commands. Note that if youre using the new completion
system, you should not dump the functions state to your startup les with reporter; use the
compdump function instead (see Chapter 20 [Completion System], page 191).
reporter [ state ... ]
Print to standard output the indicated subset of the current shell state. The state
arguments may be one or more of:
all Output everything listed below.
aliases Output alias denitions.
bindings Output ZLE key maps and bindings.
completion
Output old-style compctl commands. New completion is covered by
functions and zstyles.
functions
Output autoloads and function denitions.
limits Output limit commands.
options Output setopt commands.
styles Same as zstyles.
variables
Output shell parameter assignments, plus export commands for any
environment variables.
Chapter 26: User Contributions 343
zstyles Output zstyle commands.
If the state is omitted, all is assumed.
With the exception of all, every state can be abbreviated by any prex, even a
single letter; thus a is the same as aliases, z is the same as zstyles, etc.
26.2.5 Manipulating Hook Functions
add-zsh-hook [-dD] hook function
Several functions are special to the shell, as described in the section Special Func-
tions, Chapter 9 [Functions], page 20, in that they are automatic called at a specic
point during shell execution. Each has an associated array consisting of names of
functions to be called at the same point; these are so-called hook functions. The
shell function add-zsh-hook provides a simple way of adding or removing functions
from the array.
hook is one of chpwd, periodic, precmd, preexec, zshaddhistory, zshexit,
or zsh_directory_name, the special functions in question. Note that
zsh_directory_name is called in a dierent way from the other functions, but may
still be manipulated as a hook.
function is name of an ordinary shell function. If no options are given this will be
added to the array of functions to be executed in the given context.
If the option -d is given, the function is removed from the array of functions to be
executed.
If the option -D is given, the function is treated as a pattern and any matching
names of functions are removed from the array of functions to be executed.
The options -U, -z and -k are passed as arguments to autoload for function. For
functions contributed with zsh, the options -Uz are appropriate.
26.3 Remembering Recent Directories
The function cdr allows you to change the working directory to a previous working directory
from a list maintained automatically. It is similar in concept to the directory stack controlled
by the pushd, popd and dirs builtins, but is more congurable, and as it stores all entries in
les it is maintained across sessions and (by default) between terminal emulators in the current
session. (The pushd directory stack is not actually modied or used by cdr unless you congure
it to do so as described in the conguration section below.)
26.3.1 Installation
The system works by means of a hook function that is called every time the directory changes. To
install the system, autoload the required functions and use the add-zsh-hook function described
above:
autoload -Uz chpwd_recent_dirs cdr add-zsh-hook
add-zsh-hook chpwd chpwd_recent_dirs
Now every time you change directly interactively, no matter which command you use, the
directory to which you change will be remembered in most-recent-rst order.
Chapter 26: User Contributions 344
26.3.2 Use
All direct user interaction is via the cdr function.
The argument to cdr is a number N corresponding to the Nth most recently changed-to directory.
1 is the immediately preceding directory; the current directory is remembered but is not oered
as a destination. Note that if you have multiple windows open 1 may refer to a directory changed
to in another window; you can avoid this by having per-terminal les for storing directory as
described for the recent-dirs-file style below.
If you set the recent-dirs-default style described below cdr will behave the same as cd if
given a non-numeric argument, or more than one argument. The recent directory list is updated
just the same however you change directory.
If the argument is omitted, 1 is assumed. This is similar to pushds behaviour of swapping the
two most recent directories on the stack.
Completion for the argument to cdr is available if compinit has been run; menu selection is
recommended, using:
zstyle :completion:*:*:cdr:*:* menu selection
to allow you to cycle through recent directories; the order is preserved, so the rst choice is
the most recent directory before the current one. The verbose style is also recommended to
ensure the directory is shown; this style is on by default so no action is required unless you have
changed it.
26.3.3 Options
The behaviour of cdr may be modied by the following options.
-l lists the numbers and the corresponding directories in abbreviated form (i.e. with
~ substitution reapplied), one per line. The directories here are not quoted (this
would only be an issue if a directory name contained a newline). This is used by
the completion system.
-r sets the variable reply to the current set of directories. Nothing is printed and the
directory is not changed.
-e allows you to edit the list of directories, one per line. The list can be edited to
any extent you like; no sanity checking is performed. Completion is available. No
quoting is necessary (except for newlines, where I have in any case no sympathy);
directories are in unabbreviated from and contain an absolute path, i.e. they start
with /. Usually the rst entry should be left as the current directory.
26.3.4 Conguration
Conguration is by means of the styles mechanism that should be familiar from completion;
if not, see the description of the zstyle command in Section 22.34 [The zsh/zutil Module],
page 304. The context for setting styles should be :chpwd:* in case the meaning of the
context is extended in future, for example:
zstyle :chpwd:* recent-dirs-max 0
sets the value of the recent-dirs-max style to 0. In practice the style name is specic enough
that a context of * should be ne.
An exception is recent-dirs-insert, which is used exclusively by the completion system and so
has the usual completion system context (:completion:* if nothing more specic is needed),
though again * should be ne in practice.
Chapter 26: User Contributions 345
recent-dirs-default
If true, and the command is expecting a recent directory index, and either there
is more than one argument or the argument is not an integer, then fall through
to "cd". This allows the lazy to use only one command for directory changing.
Completion recognises this, too; see recent-dirs-insert for how to control completion
when this option is in use.
recent-dirs-file
The le where the list of directories is saved. The default is ${ZDOTDIR:-
$HOME}/.chpwd-recent-dirs, i.e. this is in your home directory unless you have
set the variable ZDOTDIR to point somewhere else. Directory names are saved in
$... quoted form, so each line in the le can be supplied directly to the shell as an
argument.
The value of this style may be an array. In this case, the rst le in the list will
always be used for saving directories while any other les are left untouched. When
reading the recent directory list, if there are fewer than the maximum number of
entries in the rst le, the contents of later les in the array will be appended with
duplicates removed from the list shown. The contents of the two les are not sorted
together, i.e. all the entries in the rst le are shown rst. The special value + can
appear in the list to indicate the default le should be read at that point. This
allows eects like the following:
zstyle :chpwd:* recent-dirs-file \
~/.chpwd-recent-dirs-${TTY##*/} +
Recent directories are read from a le numbered according to the terminal. If there
are insucient entries the list is supplemented from the default le.
It is possible to use zstyle -e to make the directory congurable at run time:
zstyle -e :chpwd:* recent-dirs-file pick-recent-dirs-file
pick-recent-dirs-file() {
if [[ $PWD = ~/text/writing(|/*) ]]; then
reply=(~/.chpwd-recent-dirs-writing)
else
reply=(+)
fi
}
In this example, if the current directory is ~/text/writing or a directory under it,
then use a special le for saving recent directories, else use the default.
recent-dirs-insert
Used by completion. If recent-dirs-default is true, then setting this to true
causes the actual directory, rather than its index, to be inserted on the command
line; this has the same eect as using the corresponding index, but makes the history
clearer and the line easier to edit. With this setting, if part of an argument was
already typed, normal directory completion rather than recent directory completion
is done; this is because recent directory completion is expected to be done by cycling
through entries menu fashion.
If the value of the style is always, then only recent directories will be completed; in
that case, use the cd command when you want to complete other directories.
If the value is fallback, recent directories will be tried rst, then normal directory
completion is performed if recent directory completion failed to nd a match.
Finally, if the value is both then both sets of completions are presented; the usual
tag mechanism can be used to distinguish results, with recent directories tagged
Chapter 26: User Contributions 346
as recent-dirs. Note that the recent directories inserted are abbreviated with
directory names where appropriate.
recent-dirs-max
The maximum number of directories to save to the le. If this is zero or negative
there is no maximum. The default is 20. Note this includes the current directory,
which isnt oered, so the highest number of directories you will be oered is one
less than the maximum.
recent-dirs-prune
This style is an array determining what directories should (or should not) be added
to the recent list. Elements of the array can include:
parent Prune parents (more accurately, ancestors) from the recent list. If
present, changing directly down by any number of directories causes
the current directory to be overwritten. For example, changing from
~pws to ~pws/some/other/dir causes ~pws not to be left on the re-
cent directory stack. This only applies to direct changes to descendant
directories; earlier directories on the list are not pruned. For exam-
ple, changing from ~pws/yet/another to ~pws/some/other/dir does not
cause ~pws to be pruned.
pattern:pattern
Gives a zsh pattern for directories that should not be added to the
recent list (if not already there). This element can be repeated to add
dierent patterns. For example, pattern:/tmp(|/*) stops /tmp or
its descendants from being added. The EXTENDED_GLOB option is always
turned on for these patterns.
recent-dirs-pushd
If set to true, cdr will use pushd instead of cd to change the directory, so the
directory is saved on the directory stack. As the directory stack is completely
separate from the list of les saved by the mechanism used in this le there is no
obvious reason to do this.
26.3.5 Use with dynamic directory naming
It is possible to refer to recent directories using the dynamic directory name syntax by using
the supplied function zsh_directory_name_cdr a hook:
autoload -Uz add-zsh-hook
add-zsh-hook -Uz zsh_directory_name zsh_directory_name_cdr
When this is done, ~[1] will refer to the most recent directory other than $PWD, and so on.
Completion after ~[... also works.
26.3.6 Details of directory handling
This section is for the curious or confused; most users will not need to know this information.
Recent directories are saved to a le immediately and hence are preserved across sessions. Note
currently no le locking is applied: the list is updated immediately on interactive commands
and nowhere else (unlike history), and it is assumed you are only going to change directory in
one window at once. This is not safe on shared accounts, but in any case the system has limited
utility when someone else is changing to a dierent set of directories behind your back.
To make this a little safer, only directory changes instituted from the command line, either
directly or indirectly through shell function calls (but not through subshells, evals, traps, com-
pletion functions and the like) are saved. Shell functions should use cd -q or pushd -q to avoid
Chapter 26: User Contributions 347
side eects if the change to the directory is to be invisible at the command line. See the contents
of the function chpwd_recent_dirs for more details.
26.4 Gathering information from version control systems
In a lot of cases, it is nice to automatically retrieve information from version control systems
(VCSs), such as subversion, CVS or git, to be able to provide it to the user; possibly in the
users prompt. So that you can instantly tell which branch you are currently on, for example.
In order to do that, you may use the vcs_info function.
The following VCSs are supported, showing the abbreviated name by which they are referred
to within the system:
Bazaar (bzr)
http://bazaar-vcs.org/
Codeville (cdv)
http://codeville.org/
Concurrent Versioning System (cvs)
http://www.nongnu.org/cvs/
Darcs (darcs)
http://darcs.net/
Fossil (fossil)
http://fossil-scm.org/
Git (git) http://git-scm.com/
GNU arch (tla)
http://www.gnu.org/software/gnu-arch/
Mercurial (hg)
http://mercurial.selenic.com/
Monotone (mtn)
http://monotone.ca/
Perforce (p4)
http://www.perforce.com/
Subversion (svn)
http://subversion.tigris.org/
SVK (svk)
http://svk.bestpractical.com/
There is also support for the patch management system quilt
(http://savannah.nongnu.org/projects/quilt). See Quilt Support below for details.
To load vcs_info:
autoload -Uz vcs_info
It can be used in any existing prompt, because it does not require any specic $psvar entries
to be available.
Chapter 26: User Contributions 348
26.4.1 Quickstart
To get this feature working quickly (including colors), you can do the following (assuming, you
loaded vcs_info properly - see above):
zstyle :vcs_info:* actionformats \
%F{5}(%f%s%F{5})%F{3}-%F{5}[%F{2}%b%F{3}|%F{1}%a%F{5}]%f
zstyle :vcs_info:* formats \
%F{5}(%f%s%F{5})%F{3}-%F{5}[%F{2}%b%F{5}]%f
zstyle :vcs_info:(sv[nk]|bzr):* branchformat %b%F{1}:%F{3}%r
precmd () { vcs_info }
PS1=%F{5}[%F{2}%n%F{5}] %F{3}%3~ ${vcs_info_msg_0_}%f%#
Obviously, the last two lines are there for demonstration. You need to call vcs_info from your
precmd function. Once that is done you need a single quoted ${vcs_info_msg_0_} in your
prompt.
To be able to use ${vcs_info_msg_0_} directly in your prompt like this, you will need to
have the PROMPT_SUBST option enabled.
Now call the vcs_info_printsys utility from the command line:
% vcs_info_printsys
## list of supported version control backends:
## disabled systems are prefixed by a hash sign (#)
bzr
cdv
cvs
darcs
fossil
git
hg
mtn
p4
svk
svn
tla
## flavours (cannot be used in the enable or disable styles; they
## are enabled and disabled with their master [git-svn -> git])
## they *can* be used in contexts: :vcs_info:git-svn:*.
git-p4
git-svn
hg-git
hg-hgsubversion
hg-hgsvn
You may not want all of these because there is no point in running the code to detect systems
you do not use. So there is a way to disable some backends altogether:
zstyle :vcs_info:* disable bzr cdv darcs mtn svk tla
You may also pick a few from that list and enable only those:
zstyle :vcs_info:* enable git cvs svn
If you rerun vcs_info_printsys after one of these commands, you will see the backends listed
in the disable style (or backends not in the enable style - if you used that) marked as disabled
by a hash sign. That means the detection of these systems is skipped completely. No wasted
time there.
Chapter 26: User Contributions 349
26.4.2 Conguration
The vcs_info feature can be congured via zstyle.
First, the context in which we are working:
:vcs_info:vcs-string:user-context:repo-root-name
vcs-string is one of: git, git-svn, git-p4, hg, hg-git, hg-hgsubversion, hg-hgsvn, darcs, bzr, cdv,
mtn, svn, cvs, svk, tla, p4 or fossil. When hooks are active the hooks name is added
after a +. (See Hooks in vcs info below.)
user-context
is a freely congurable string, assignable by the user as the rst argument to
vcs_info (see its description below).
repo-root-name
is the name of a repository in which you want a style to match. So, if you want
a setting specic to /usr/src/zsh, with that being a CVS checkout, you can set
repo-root-name to zsh to make it so.
There are three special values for vcs-string: The rst is named -init-, that is in eect as
long as there was no decision what VCS backend to use. The second is -preinit-; it is used
before vcs_info is run, when initializing the data exporting variables. The third special value
is formats and is used by the vcs_info_lastmsg for looking up its styles.
The initial value of repo-root-name is -all- and it is replaced with the actual name, as soon
as it is known. Only use this part of the context for dening the formats, actionformats or
branchformat styles, as it is guaranteed that repo-root-name is set up correctly for these only.
For all other styles, just use * instead.
There are two pre-dened values for user-context:
default the one used if none is specied
command used by vcs info lastmsg to lookup its styles
You can of course use :vcs_info:* to match all VCSs in all user-contexts at once.
This is a description of all styles that are looked up.
formats A list of formats, used when actionformats is not used (which is most of the time).
actionformats
A list of formats, used if there is a special action going on in your current repository;
like an interactive rebase or a merge conict.
branchformat
Some backends replace %b in the formats and actionformats styles above, not only
by a branch name but also by a revision number. This style lets you modify how
that string should look.
nvcsformats
These "formats" are exported when we didnt detect a version control system for
the current directory or vcs_info was disabled. This is useful if you want vcs_info
to completely take over the generation of your prompt. You would do something
like PS1=${vcs_info_msg_0_} to accomplish that.
hgrevformat
hg uses both a hash and a revision number to reference a specic changeset in a
repository. With this style you can format the revision string (see branchformat)
to include either or both. Its only useful when get-revision is true. Note, the full
40-character revision id is not available (except when using the use-simple option)
Chapter 26: User Contributions 350
because executing hg more than once per prompt is too slow; you may customize
this behavior using hooks.
max-exports
Denes the maximum number of vcs_info_msg_*_ variables vcs_info will export.
enable A list of backends you want to use. Checked in the -init- context. If this list
contains an item called NONE no backend is used at all and vcs_info will do nothing.
If this list contains ALL, vcs_info will use all known backends. Only with ALL in
enable will the disable style have any eect. ALL and NONE are case insensitive.
disable A list of VCSs you dont want vcs_info to test for repositories (checked in the
-init- context, too). Only used if enable contains ALL.
disable-patterns
A list of patterns that are checked against $PWD. If a pattern matches, vcs_info
will be disabled. This style is checked in the :vcs_info:-init-:*:-all- context.
Say, ~/.zsh is a directory under version control, in which you do not want vcs_info
to be active, do:
zstyle :vcs_info:* disable-patterns "$HOME/.zsh(|/*)"
use-quilt
If enabled, the quilt support code is active in addon mode. See Quilt Support
for details.
quilt-standalone
If enabled, standalone mode detection is attempted if no VCS is active in a given
directory. See Quilt Support for details.
quilt-patch-dir
Overwrite the value of the $QUILT_PATCHES environment variable. See Quilt
Support for details.
quiltcommand
When quilt itself is called in quilt support the value of this style is used as the
command name.
check-for-changes
If enabled, this style causes the %c and %u format escapes to show when the working
directory has uncommitted changes. The strings displayed by these escapes can
be controlled via the stagedstr and unstagedstr styles. The only backends that
currently support this option are git, hg, and bzr (the latter two only support
unstaged).
For this style to be evaluated with the hg backend, the get-revision style needs
to be set and the use-simple style needs to be unset. The latter is the default; the
former is not.
With the bzr backend, lightweight checkouts only honor this style if the use-server
style is set.
Note, the actions taken if this style is enabled are potentially expensive (read: they
may be slow, depending on how big the current repository is). Therefore, it is
disabled by default.
check-for-staged-changes
This style is like check-for-changes, but it never checks the worktree les, only
the metadata in the .${vcs} dir. Therefore, this style initializes only the %c escape
(with stagedstr) but not the %u escape. This style is faster than check-for-
changes.
Chapter 26: User Contributions 351
In the git backend, this style checks for changes in the index. Other backends do
not currently implement this style.
This style is disabled by default.
stagedstr
This string will be used in the %c escape if there are staged changes in the repository.
unstagedstr
This string will be used in the %u escape if there are unstaged changes in the repos-
itory.
command This style causes vcs_info to use the supplied string as the command to use as the
VCSs binary. Note, that setting this in :vcs info:* is not a good idea.
If the value of this style is empty (which is the default), the used binary name is
the name of the backend in use (e.g. svn is used in an svn repository).
The repo-root-name part in the context is always the default -all- when this style
is looked up.
For example, this style can be used to use binaries from non-default installation
directories. Assume, git is installed in /usr/bin but your sysadmin installed a newer
version in /usr/local/bin. Instead of changing the order of your $PATH parameter,
you can do this:
zstyle :vcs_info:git:*:-all- command /usr/local/bin/git
use-server
This is used by the Perforce backend (p4) to decide if it should contact the Perforce
server to nd out if a directory is managed by Perforce. This is the only reliable
way of doing this, but runs the risk of a delay if the server name cannot be found.
If the server (more specically, the host:port pair describing the server) cannot be
contacted, its name is put into the associative array vcs_info_p4_dead_servers
and is not contacted again during the session until it is removed by hand. If you
do not set this style, the p4 backend is only usable if you have set the environment
variable P4CONFIG to a le name and have corresponding les in the root directories
of each Perforce client. See comments in the function VCS_INFO_detect_p4 for more
detail.
The Bazaar backend (bzr) uses this to permit contacting the server about
lightweight checkouts, see the check-for-changes style.
use-simple
If there are two dierent ways of gathering information, you can select the simpler
one by setting this style to true; the default is to use the not-that-simple code,
which is potentially a lot slower but might be more accurate in all possible cases.
This style is used by the bzr and hg backends. In the case of hg it will invoke the
external hexdump program to parse the binary dirstate cache le; this method will
not return the local revision number.
get-revision
If set to true, vcs info goes the extra mile to gure out the revision of a repositorys
work tree (currently for the git and hg backends, where this kind of information
is not always vital). For git, the hash value of the currently checked out commit
is available via the %i expansion. With hg, the local revision number and the
corresponding global hash are available via %i.
get-mq If set to true, the hg backend will look for a Mercurial Queue (mq) patch directory.
Information will be available via the %m replacement.
Chapter 26: User Contributions 352
get-bookmarks
If set to true, the hg backend will try to get a list of current bookmarks. They will
be available via the %m replacement.
use-prompt-escapes
Determines if we assume that the assembled string from vcs_info includes prompt
escapes. (Used by vcs_info_lastmsg.)
debug Enable debugging output to track possible problems. Currently this style is only
used by vcs_infos hooks system.
hooks A list style that denes hook-function names. See Hooks in vcs info below for
details.
The default values for these styles in all contexts are:
formats " (%s)-[%b]%u%c-"
actionformats
" (%s)-[%b|%a]%u%c-"
branchformat
"%b:%r" (for bzr, svn, svk and hg)
nvcsformats
""
hgrevformat
"%r:%h"
max-exports
2
enable ALL
disable (empty list)
disable-patterns
(empty list)
check-for-changes
false
check-for-staged-changes
false
stagedstr
(string: "S")
unstagedstr
(string: "U")
command (empty string)
use-server
false
use-simple
false
get-revision
false
get-mq true
Chapter 26: User Contributions 353
get-bookmarks
false
use-prompt-escapes
true
debug false
hooks (empty list)
use-quilt
false
quilt-standalone
false
quilt-patch-dir
empty - use $QUILT_PATCHES
quiltcommand
quilt
In normal formats and actionformats the following replacements are done:
%s The VCS in use (git, hg, svn, etc.).
%b Information about the current branch.
%a An identier that describes the action. Only makes sense in actionformats.
%i The current revision number or identier. For hg the hgrevformat style may be
used to customize the output.
%c The string from the stagedstr style if there are staged changes in the repository.
%u The string from the unstagedstr style if there are unstaged changes in the reposi-
tory.
%R The base directory of the repository.
%r The repository name. If %R is /foo/bar/repoXY, %r is repoXY.
%S A subdirectory within a repository. If $PWD is /foo/bar/repoXY/beer/tasty, %S is
beer/tasty.
%m A "misc" replacement. It is at the discretion of the backend to decide what this
replacement expands to. It is currently used by the hg and git backends to display
patch information from the mq and stgit extensions.
In branchformat these replacements are done:
%b The branch name.
%r The current revision number or the hgrevformat style for hg.
In hgrevformat these replacements are done:
%r The current local revision number.
%h The current global revision identier.
In patch-format and nopatch-format these replacements are done:
%p The name of the top-most applied patch (applied-string).
%u The number of unapplied patches (unapplied-string).
%n The number of applied patches.
Chapter 26: User Contributions 354
%c The number of unapplied patches.
%a The number of all patches.
%g The names of active mq guards (hg backend).
%G The number of active mq guards (hg backend).
Not all VCS backends have to support all replacements. For nvcsformats no replacements are
performed at all, it is just a string.
26.4.3 Oddities
If you want to use the %b (bold o) prompt expansion in formats, which expands %b itself,
use %%b. That will cause the vcs_info expansion to replace %%b with %b, so that zshs prompt
expansion mechanism can handle it. Similarly, to hand down %b from branchformat, use %%%%b.
Sorry for this inconvenience, but it cannot be easily avoided. Luckily we do not clash with a lot
of prompt expansions and this only needs to be done for those.
26.4.4 Quilt Support
Quilt is not a version control system, therefore this is not implemented as a backend. It can help
keeping track of a series of patches. People use it to keep a set of changes they want to use on
top of software packages (which is tightly integrated into the package build process - the Debian
project does this for a large number of packages). Quilt can also help individual developers keep
track of their own patches on top of real version control systems.
The vcs_info integration tries to support both ways of using quilt by having two slightly
dierent modes of operation: addon mode and standalone mode).
For addon mode to become active vcs_info must have already detected a real version control
system controlling the directory. If that is the case, a directory that holds quilts patches needs
to be found. That directory is congurable via the QUILT_PATCHES environment variable. If
that variable exists its value is used, otherwise the value patches is assumed. The value from
$QUILT_PATCHES can be overwritten using the quilt-patches style. (Note: you can use
vcs_info to keep the value of $QUILT_PATCHES correct all the time via the post-quilt hook).
When the directory in question is found, quilt is assumed to be active. To gather more informa-
tion, vcs_info looks for a directory called .pc; Quilt uses that directory to track its current
state. If this directory does not exist we know that quilt has not done anything to the working
directory (read: no patches have been applied yet).
If patches are applied, vcs_info will try to nd out which. If you want to know which patches
of a series are not yet applied, you need to activate the get-unapplied style in the appropriate
context.
vcs_info allows for very detailed control over how the gathered information is presented (see
the below sections, Styles and Hooks in vcs info), all of which are documented below. Note
there are a number of other patch tracking systems that work on top of a certain version control
system (like stgit for git, or mq for hg); the conguration for systems like that are generally
congured the same way as the quilt support.
If the quilt support is working in addon mode, the produced string is available as a simple
format replacement (%Q to be precise), which can be used in formats and actionformats; see
below for details).
If, on the other hand, the support code is working in standalone mode, vcs_info will pretend
as if quilt were an actual version control system. That means that the version control system
identier (which otherwise would be something like svn or cvs) will be set to -quilt-.
This has implications on the used style context where this identier is the second element.
vcs_info will have lled in a proper value for the "repositorys" root directory and the string
Chapter 26: User Contributions 355
containing the information about quilts state will be available as the misc replacement (and
%Q for compatibility with addon mode.
What is left to discuss is how standalone mode is detected. The detection itself is a series of
searches for directories. You can have this detection enabled all the time in every directory that
is not otherwise under version control. If you know there is only a limited set of trees where you
would like vcs_info to try and look for Quilt in standalone mode to minimise the amount of
searching on every call to vcs_info, there are a number of ways to do that:
Essentially, standalone mode detection is controlled by a style called quilt-standalone. It
is a string style and its value can have dierent eects. The simplest values are: always to run
detection every time vcs_info is run, and never to turn the detection o entirely.
If the value of quilt-standalone is something else, it is interpreted dierently. If the value is
the name of a scalar variable the value of that variable is checked and that value is used in the
same always/never way as described above.
If the value of quilt-standalone is an array, the elements of that array are used as directory
names under which you want the detection to be active.
If quilt-standalone is an associative array, the keys are taken as directory names under which
you want the detection to be active, but only if the corresponding value is the string true.
Last, but not least, if the value of quilt-standalone is the name of a function, the function is
called without arguments and the return value decides whether detection should be active. A
0 return value is true; a non-zero return value is interpreted as false.
Note, if there is both a function and a variable by the name of quilt-standalone, the function
will take precedence.
26.4.5 Function Descriptions (Public API)
vcs_info [user-context]
The main function, that runs all backends and assembles all data into
${vcs_info_msg_*_}. This is the function you want to call from precmd if
you want to include up-to-date information in your prompt (see Variable
description below). If an argument is given, that string will be used instead of
default in the user-context eld of the style context.
vcs_info_hookadd
Statically registers a number of functions to a given hook. The hook needs to be
given as the rst argument; what follows is a list of hook-function names to register
to the hook. The +vi- prex needs to be left out here. See Hooks in vcs info
below for details.
vcs_info_hookdel
Remove hook-functions from a given hook. The hook needs to be given as the rst
non-option argument; what follows is a list of hook-function names to un-register
from the hook. If -a is used as the rst argument, all occurances of the functions
are unregistered. Otherwise only the last occurance is removed (if a function was
registered to a hook more than once) . The +vi- prex needs to be left out here.
See Hooks in vcs info below for details.
vcs_info_lastmsg
Outputs the last ${vcs_info_msg_*_} value. Takes into account the value of the
use-prompt-escapes style in :vcs_info:formats:command:-all-. It also only
prints max-exports values.
vcs_info_printsys [user-context]
Prints a list of all supported version control systems. Useful to nd out possible
contexts (and which of them are enabled) or values for the disable style.
Chapter 26: User Contributions 356
vcs_info_setsys
Initializes vcs_infos internal list of available backends. With this function, you
can add support for new VCSs without restarting the shell.
All functions named VCS INFO * are for internal use only.
26.4.6 Variable Description
${vcs_info_msg_N_} (Note the trailing underscore)
Where N is an integer, e.g., vcs_info_msg_0_. These variables are the storage
for the informational message the last vcs_info call has assembled. These are
strongly connected to the formats, actionformats and nvcsformats styles de-
scribed above. Those styles are lists. The rst member of that list gets expanded
into ${vcs_info_msg_0_}, the second into ${vcs_info_msg_1_} and the Nth into
${vcs_info_msg_N-1_}. These parameters are exported into the environment. (See
the max-exports style above.)
All variables named VCS INFO * are for internal use only.
26.4.7 Hooks in vcs info
Hooks are places in vcs_info where you can run your own code. That code can communicate
with the code that called it and through that, change the systems behaviour.
For conguration, hooks change the style context:
:vcs_info:vcs-string+hook-name:user-context:repo-root-name
To register functions to a hook, you need to list them in the hooks style in the appropriate
context.
Example:
zstyle :vcs_info:*+foo:* hooks bar baz
This registers functions to the hook foo for all backends. In order to avoid namespace problems,
all registered function names are prepended by a +vi-, so the actual functions called for the
foo hook are +vi-bar and +vi-baz.
If you would like to register a function to a hook regardless of the current context, you may
use the vcs_info_hookadd function. To remove a function that was added like that, the
vcs_info_hookdel function can be used.
If something seems weird, you can enable the debug boolean style in the proper context and
the hook-calling code will print what it tried to execute and whether the function in question
existed.
When you register more than one function to a hook, all functions are executed one after another
until one function returns non-zero or until all functions have been called. Context-sensitive hook
functions are executed before statically registered ones (the ones added by vcs_info_hookadd).
You may pass data between functions via an associative array, user_data. For example:
+vi-git-myfirsthook(){
user_data[myval]=$myval
}
+vi-git-mysecondhook(){
# do something with ${user_data[myval]}
}
There are a number of variables that are special in hook contexts:
Chapter 26: User Contributions 357
ret The return value that the hooks system will return to the caller. The default is an
integer zero. If and how a changed ret value changes the execution of the caller
depends on the specic hook. See the hook documentation below for details.
hook_com An associated array which is used for bidirectional communication from the caller
to hook functions. The used keys depend on the specic hook.
context The active context of the hook. Functions that wish to change this variable should
make it local scope rst.
vcs The current VCS after it was detected. The same values as in the enable/disable
style are used. Available in all hooks except start-up.
Finally, the full list of currently available hooks:
start-up Called after starting vcs_info but before the VCS in this directory is determined.
It can be used to deactivate vcs_info temporarily if necessary. When ret is set to
1, vcs_info aborts and does nothing; when set to 2, vcs_info sets up everything
as if no version control were active and exits.
pre-get-data
Same as start-up but after the VCS was detected.
gen-hg-bookmark-string
Called in the Mercurial backend when a bookmark string is generated; the get-
revision and get-bookmarks styles must be true.
This hook gets the names of the Mercurial bookmarks that vcs_info collected from
hg.
When setting ret to non-zero, the string in ${hook_com[hg-bookmark-string]}
will be used in the %m escape in formats and actionformats and will be availabe
in the global backend_misc array as ${backend_misc[bookmarks]}.
gen-applied-string
Called in the git (with stgit), and hg (with mq) backends and in quilt support
when the applied-string is generated; the use-quilt zstyle must be true for
quilt (the mq and stgit backends are active by default).
This hook gets the names of all applied patches which vcs_info collected so far in
the opposite order, which means that the rst argument is the top-most patch and
so forth.
When setting ret to non-zero, the string in ${hook_com[applied-string]} will
be used in the %m escape in formats and actionformats; it will be available in the
global backend_misc array as $backend_misc[patches]}; and it will be available
as %p in the patch-format and nopatch-format styles.
gen-unapplied-string
Called in the git (with stgit), and hg (with mq) backend and in quilt support
when the unapplied-string is generated; the get-unapplied style must be true.
This hook gets the names of all unapplied patches which vcs_info collected so far
in the opposite order, which mean that the rst argument is the patch next-in-line
to be applied and so forth.
When setting ret to non-zero, the string in ${hook_com[unapplied-string]} will
be available as %u in the patch-format and nopatch-format styles.
gen-mqguards-string
Called in the hg backend when guards-string is generated; the get-mq style must
be true (default).
Chapter 26: User Contributions 358
This hook gets the names of any active mq guards.
When setting ret to non-zero, the string in ${hook_com[guards-string]} will be
used in the %g escape in the patch-format and nopatch-format styles.
no-vcs This hooks is called when no version control system was detected.
The hook com parameter is not used.
post-backend
Called as soon as the backend has nished collecting information.
The hook_com keys available are as for the set-message hook.
post-quilt
Called after the quilt support is done. The following information is passed as
arguments to the hook: 1. the quilt-support mode (addon or standalone); 2. the
directory that contains the patch series; 3. the directory that holds quilts status
information (the .pc directory) or the string "-nopc-" if that directory wasnt
found.
The hook com parameter is not used.
set-branch-format
Called before branchformat is set. The only argument to the hook is the format
that is congured at this point.
The hook_com keys considered are branch and revision. They are set to the
values gured out so far by vcs_info and any change will be used directly when
the actual replacement is done.
If ret is set to non-zero, the string in ${hook_com[branch-replace]} will be used
unchanged as the %b replacement in the variables set by vcs_info.
set-hgrev-format
Called before a hgrevformat is set. The only argument to the hook is the format
that is congured at this point.
The hook_com keys considered are hash and localrev. They are set to the
values gured out so far by vcs_info and any change will be used directly when
the actual replacement is done.
If ret is set to non-zero, the string in ${hook_com[rev-replace]} will be used
unchanged as the %i replacement in the variables set by vcs_info.
set-message
Called each time before a vcs_info_msg_N_ message is set. It takes two arguments;
the rst being the N in the message variable name, the second is the currently
congured formats or actionformats.
There are a number of hook_com keys, that are used here: action, branch,
base, base-name, subdir, staged, unstaged, revision, misc, vcs and
one miscN entry for each backend-specic data eld (N starting at zero). They are
set to the values gured out so far by vcs_info and any change will be used directly
when the actual replacement is done.
Since this hook is triggered multiple times (once for each congured formats or
actionformats), each of the hook_com keys mentioned above (except for the miscN
entries) has an _orig counterpart, so even if you changed a value to your liking
you can still get the original value in the next run. Changing the _orig values is
probably not a good idea.
If ret is set to non-zero, the string in ${hook_com[message]} will be used un-
changed as the message by vcs_info.
Chapter 26: User Contributions 359
If all of this sounds rather confusing, take a look at the Examples section below and also in the
Misc/vcs info-examples le in the Zsh source. They contain some explanatory code.
26.4.8 Examples
Dont use vcs_info at all (even though its in your prompt):
zstyle :vcs_info:* enable NONE
Disable the backends for bzr and svk:
zstyle :vcs_info:* disable bzr svk
Disable everything but bzr and svk:
zstyle :vcs_info:* enable bzr svk
Provide a special formats for git:
zstyle :vcs_info:git:* formats GIT, BABY! [%b]
zstyle :vcs_info:git:* actionformats GIT ACTION! [%b|%a]
All %x expansion in all sorts of formats ("formats", "actionformats", branchformat, you name
it) are done using the zformat builtin from the zsh/zutil module. That means you can do
everything with these %x items what zformat supports. In particular, if you want something
that is really long to have a xed width, like a hash in a mercurial branchformat, you can do
this: %12.12i. Thatll shrink the 40 character hash to its 12 leading characters. The form is
actually %min.maxx. More is possible. See Section 22.34 [The zsh/zutil Module], page 304 for
details.
Use the quicker bzr backend
zstyle :vcs_info:bzr:* use-simple true
If you do use use-simple, please report if it does the-right-thing[tm].
Display the revision number in yellow for bzr and svn:
zstyle :vcs_info:(svn|bzr):* branchformat %b%{${fg[yellow]}%}:%r
If you want colors, make sure you enclose the color codes in %{...%} if you want to use the
string provided by vcs_info in prompts.
Here is how to print the VCS information as a command (not in a prompt):
alias vcsi=vcs_info command; vcs_info_lastmsg
This way, you can even dene dierent formats for output via vcs_info_lastmsg in the
:vcs info:*:command:* namespace.
Now as promised, some code that uses hooks: say, youd like to replace the string svn by
subversion in vcs_infos %s formats replacement.
First, we will tell vcs_info to call a function when populating the message variables with the
gathered information:
zstyle :vcs_info:*+set-message:* hooks svn2subversion
Nothing happens. Which is reasonable, since we didnt dene the actual function yet. To see
what the hooks subsystem is trying to do, enable the debug style:
zstyle :vcs_info:*+*:* debug true
That should give you an idea what is going on. Specically, the function that we are looking for is
+vi-svn2subversion. Note, the +vi- prex. So, everything is in order, just as documented.
When you are done checking out the debugging output, disable it again:
zstyle :vcs_info:*+*:* debug false
Now, lets dene the function:
Chapter 26: User Contributions 360
function +vi-svn2subversion() {
[[ ${hook_com[vcs_orig]} == svn ]] && hook_com[vcs]=subversion
}
Simple enough. And it could have even been simpler, if only we had registered our function in a
less generic context. If we do it only in the svn backends context, we dont need to test which
the active backend is:
zstyle :vcs_info:svn+set-message:* hooks svn2subversion
function +vi-svn2subversion() {
hook_com[vcs]=subversion
}
And nally a little more elaborate example, that uses a hook to create a customised bookmark
string for the hg backend.
Again, we start o by registering a function:
zstyle :vcs_info:hg+gen-hg-bookmark-string:* hooks hgbookmarks
And then we dene the +vi-hgbookmarks function:
function +vi-hgbookmarks() {
# The default is to connect all bookmark names by
# commas. This mixes things up a little.
# Imagine, theres one type of bookmarks that is
# special to you. Say, because its *your* work.
# Those bookmarks look always like this: "sh/*"
# (because your initials are sh, for example).
# This makes the bookmarks string use only those
# bookmarks. If theres more than one, it
# concatenates them using commas.
# The bookmarks returned by hg are available in
# the functions positional parameters.
local s="${(Mj:,:)@:#sh/*}"
# Now, the communication with the code that calls
# the hook functions is done via the hook_com[]
# hash. The key at which the gen-hg-bookmark-string
# hook looks is hg-bookmark-string. So:
hook_com[hg-bookmark-string]=$s
# And to signal that we want to use the string we
# just generated, set the special variable ret to
# something other than the default zero:
ret=1
return 0
}
Some longer examples and code snippets which might be useful are available in the examples
le located at Misc/vcs info-examples in the Zsh source directory.
This concludes our guided tour through zshs vcs_info.
26.5 Prompt Themes
Chapter 26: User Contributions 361
26.5.1 Installation
You should make sure all the functions from the Functions/Prompts directory of the source
distribution are available; they all begin with the string prompt_ except for the special
functionpromptinit. You also need the colors function from Functions/Misc. All of these
functions may already have been installed on your system; if not, you will need to nd them
and copy them. The directory should appear as one of the elements of the fpath array (this
should already be the case if they were installed), and at least the function promptinit should
be autoloaded; it will autoload the rest. Finally, to initialize the use of the system you need to
call the promptinit function. The following code in your .zshrc will arrange for this; assume
the functions are stored in the directory ~/myfns:
fpath=(~/myfns $fpath)
autoload -U promptinit
promptinit
26.5.2 Theme Selection
Use the prompt command to select your preferred theme. This command may be added to your
.zshrc following the call to promptinit in order to start zsh with a theme already selected.
prompt [ -c | -l ]
prompt [ -p | -h ] [ theme ... ]
prompt [ -s ] theme [ arg ... ]
Set or examine the prompt theme. With no options and a theme argument, the
theme with that name is set as the current theme. The available themes are de-
termined at run time; use the -l option to see a list. The special theme random
selects at random one of the available themes and sets your prompt to that.
In some cases the theme may be modied by one or more arguments, which should
be given after the theme name. See the help for each theme for descriptions of these
arguments.
Options are:
-c Show the currently selected theme and its parameters, if any.
-l List all available prompt themes.
-p Preview the theme named by theme, or all themes if no theme is given.
-h Show help for the theme named by theme, or for the prompt function if
no theme is given.
-s Set theme as the current theme and save state.
prompt_theme_setup
Each available theme has a setup function which is called by the prompt function
to install that theme. This function may dene other functions as necessary to
maintain the prompt, including functions used to preview the prompt or provide
help for its use. You should not normally call a themes setup function directly.
26.6 ZLE Functions
26.6.1 Widgets
These functions all implement user-dened ZLE widgets (see Chapter 18 [Zsh Line Editor],
page 144) which can be bound to keystrokes in interactive shells. To use them, your .zshrc
should contain lines of the form
Chapter 26: User Contributions 362
autoload function
zle -N function
followed by an appropriate bindkey command to associate the function with a key sequence.
Suggested bindings are described below.
bash-style word functions
If you are looking for functions to implement moving over and editing words in the
manner of bash, where only alphanumeric characters are considered word characters,
you can use the functions described in the next section. The following is sucient:
autoload -U select-word-style
select-word-style bash
forward-word-match, backward-word-match
kill-word-match, backward-kill-word-match
transpose-words-match, capitalize-word-match
up-case-word-match, down-case-word-match
select-word-style, match-word-context, match-words-by-style
The eight -match functions are drop-in replacements for the builtin widgets without
the sux. By default they behave in a similar way. However, by the use of styles
and the function select-word-style, the way words are matched can be altered.
The simplest way of conguring the functions is to use select-word-style, which
can either be called as a normal function with the appropriate argument, or invoked
as a user-dened widget that will prompt for the rst character of the word style to
be used. The rst time it is invoked, the eight -match functions will automatically
replace the builtin versions, so they do not need to be loaded explicitly.
The word styles available are as follows. Only the rst character is examined.
bash Word characters are alphanumeric characters only.
normal As in normal shell operation: word characters are alphanumeric char-
acters plus any characters present in the string given by the parameter
$WORDCHARS.
shell Words are complete shell command arguments, possibly including com-
plete quoted strings, or any tokens special to the shell.
whitespace
Words are any set of characters delimited by whitespace.
default Restore the default settings; this is usually the same as normal.
All but default can be input as an upper case character, which has the same
eect but with subword matching turned on. In this case, words with upper case
characters are treated specially: each separate run of upper case characters, or
an upper case character followed by any number of other characters, is considered
a word. The style subword-range can supply an alternative character range to
the default [:upper:]; the value of the style is treated as the contents of a [...]
pattern (note that the outer brackets should not be supplied, only those surrounding
named ranges).
More control can be obtained using the zstyle command, as described in
Section 22.34 [The zsh/zutil Module], page 304. Each style is looked up in the
context :zle:widget where widget is the name of the user-dened widget, not the
name of the function implementing it, so in the case of the denitions supplied
by select-word-style the appropriate contexts are :zle:forward-word, and so
on. The function select-word-style itself always denes styles for the context
Chapter 26: User Contributions 363
:zle:* which can be overridden by more specic (longer) patterns as well as
explicit contexts.
The style word-style species the rules to use. This may have the following values.
normal Use the standard shell rules, i.e. alphanumerics and $WORDCHARS, unless
overridden by the styles word-chars or word-class.
specified
Similar to normal, but only the specied characters, and not also al-
phanumerics, are considered word characters.
unspecified
The negation of specied. The given characters are those which will not
be considered part of a word.
shell Words are obtained by using the syntactic rules for generating shell com-
mand arguments. In addition, special tokens which are never command
arguments such as () are also treated as words.
whitespace
Words are whitespace-delimited strings of characters.
The rst three of those rules usually use $WORDCHARS, but the value in the parameter
can be overridden by the style word-chars, which works in exactly the same way
as $WORDCHARS. In addition, the style word-class uses character class syntax to
group characters and takes precedence over word-chars if both are set. The word-
class style does not include the surrounding brackets of the character class; for
example, -:[:alnum:] is a valid word-class to include all alphanumerics plus the
characters - and :. Be careful including ], ^ and - as these are special inside
character classes.
word-style may also have -subword appended to its value to turn on subword
matching, as described above.
The style skip-chars is mostly useful for transpose-words and similar functions.
If set, it gives a count of characters starting at the cursor position which will not
be considered part of the word and are treated as space, regardless of what they
actually are. For example, if
zstyle :zle:transpose-words skip-chars 1
has been set, and transpose-words-match is called with the cursor on the X of
fooXbar, where X can be any character, then the resulting expression is barXfoo.
Finer grained control can be obtained by setting the style word-context to an
array of pairs of entries. Each pair of entries consists of a pattern and a subcontext.
The shell argument the cursor is on is matched against each pattern in turn until
one matches; if it does, the context is extended by a colon and the corresponding
subcontext. Note that the test is made against the original word on the line, with no
stripping of quotes. Special handling is done between words: the current context is
examined and if it contains the string back, the word before the cursor is considered,
else the word after cursor is considered. Some examples are given below.
The style skip-whitespace-first is only used with the forward-word widget. If
it is set to true, then forward-word skips any non-word-characters, followed by
any non-word-characters: this is similar to the behaviour of other word-orientated
widgets, and also that used by other editors, however it diers from the standard
zsh behaviour. When using select-word-style the widget is set in the context
:zle:* to true if the word style is bash and false otherwise. It may be overridden
by setting it in the more specic context :zle:forward-word*.
Chapter 26: User Contributions 364
Here are some examples of use of the styles, actually taken from the simplied
interface in select-word-style:
zstyle :zle:* word-style standard
zstyle :zle:* word-chars
Implements bash-style word handling for all widgets, i.e. only alphanumerics are
word characters; equivalent to setting the parameter WORDCHARS empty for the given
context.
style :zle:*kill* word-style space
Uses space-delimited words for widgets with the word kill in the name. Neither of
the styles word-chars nor word-class is used in this case.
Here are some examples of use of the word-context style to extend the context.
zstyle :zle:* word-context "*/*" file "[[:space:]]" whitespace
zstyle :zle:transpose-words:whitespace word-style shell
zstyle :zle:transpose-words:filename word-style normal
zstyle :zle:transpose-words:filename word-chars
This provides two dierent ways of using transpose-words depending on whether
the cursor is on whitespace between words or on a lename, here any word containing
a /. On whitespace, complete arguments as dened by standard shell rules will be
transposed. In a lename, only alphanumerics will be transposed. Elsewhere, words
will be transposed using the default style for :zle:transpose-words.
The word matching and all the handling of zstyle settings is actually implemented
by the function match-words-by-style. This can be used to create new user-
dened widgets. The calling function should set the local parameter curcontext
to :zle:widget, create the local parameter matched_words and call match-words-
by-style with no arguments. On return, matched_words will be set to an array
with the elements: (1) the start of the line (2) the word before the cursor (3) any
non-word characters between that word and the cursor (4) any non-word character
at the cursor position plus any remaining non-word characters before the next word,
including all characters specied by the skip-chars style, (5) the word at or follow-
ing the cursor (6) any non-word characters following that word (7) the remainder of
the line. Any of the elements may be an empty string; the calling function should
test for this to decide whether it can perform its function.
It is possible to pass options with arguments to match-words-by-style to override
the use of styles. The options are:
-w word-style
-s skip-chars
-c word-class
-C word-chars
-r subword-range
For example, match-words-by-style -w shell -c 0 may be used to extract the
command argument around the cursor.
The word-context style is implemented by the function match-word-context. This
should not usually need to be called directly.
copy-earlier-word
This widget works like a combination of insert-last-word and copy-prev-shell-
word. Repeated invocations of the widget retrieve earlier words on the relevant
Chapter 26: User Contributions 365
history line. With a numeric argument N, insert the Nth word from the history
line; N may be negative to count from the end of the line.
If insert-last-word has been used to retrieve the last word on a previous history
line, repeated invocations will replace that word with earlier words from the same
line.
Otherwise, the widget applies to words on the line currently being edited. The
widget style can be set to the name of another widget that should be called to
retrieve words. This widget must accept the same three arguments as insert-
last-word.
cycle-completion-positions
After inserting an unambiguous string into the command line, the new function
based completion system may know about multiple places in this string where char-
acters are missing or dier from at least one of the possible matches. It will then
place the cursor on the position it considers to be the most interesting one, i.e. the
one where one can disambiguate between as many matches as possible with as little
typing as possible.
This widget allows the cursor to be easily moved to the other interesting spots. It
can be invoked repeatedly to cycle between all positions reported by the completion
system.
delete-whole-word-match
This is another function which works like the -match functions described immedi-
ately above, i.e. using styles to decide the word boundaries. However, it is not a
replacement for any existing function.
The basic behaviour is to delete the word around the cursor. There is no numeric
prex handling; only the single word around the cursor is considered. If the widget
contains the string kill, the removed text will be placed in the cutbuer for future
yanking. This can be obtained by dening kill-whole-word-match as follows:
zle -N kill-whole-word-match delete-whole-word-match
and then binding the widget kill-whole-word-match.
up-line-or-beginning-search, down-line-or-beginning-search
These widgets are similar to the builtin functions up-line-or-search and down-
line-or-search: if in a multiline buer they move up or down within the buer,
otherwise they search for a history line matching the start of the current line. In
this case, however, they search for a line which matches the current line up to the
current cursor position, in the manner of history-beginning-search-backward
and -forward, rather than the rst word on the line.
edit-command-line
Edit the command line using your visual editor, as in ksh.
bindkey -M vicmd v edit-command-line
expand-absolute-path
Expand the le name under the cursor to an absolute path, resolving symbolic
links. Where possible, the initial path segment is turned into a named directory or
reference to a users home directory.
history-search-end
This function implements the widgets history-beginning-search-backward-end
and history-beginning-search-forward-end. These commands work by rst
calling the corresponding builtin widget (see Section 18.6.2 [History Control],
Chapter 26: User Contributions 366
page 160) and then moving the cursor to the end of the line. The original cur-
sor position is remembered and restored before calling the builtin widget a second
time, so that the same search is repeated to look farther through the history.
Although you autoload only one function, the commands to use it are slightly
dierent because it implements two widgets.
zle -N history-beginning-search-backward-end \
history-search-end
zle -N history-beginning-search-forward-end \
history-search-end
bindkey \e^P history-beginning-search-backward-end
bindkey \e^N history-beginning-search-forward-end
history-beginning-search-menu
This function implements yet another form of history searching. The text before the
cursor is used to select lines from the history, as for history-beginning-search-
backward except that all matches are shown in a numbered menu. Typing the
appropriate digits inserts the full history line. Note that leading zeroes must be
typed (they are only shown when necessary for removing ambiguity). The entire
history is searched; there is no distinction between forwards and backwards.
With a prex argument, the search is not anchored to the start of the line; the string
typed by the use may appear anywhere in the line in the history.
If the widget name contains -end the cursor is moved to the end of the line inserted.
If the widget name contains -space any space in the text typed is treated as a
wildcard and can match anything (hence a leading space is equivalent to giving a
prex argument). Both forms can be combined, for example:
zle -N history-beginning-search-menu-space-end \
history-beginning-search-menu
history-pattern-search
The function history-pattern-search implements widgets which prompt for a
pattern with which to search the history backwards or forwards. The pattern is in
the usual zsh format, however the rst character may be ^ to anchor the search to
the start of the line, and the last character may be $ to anchor the search to the
end of the line. If the search was not anchored to the end of the line the cursor is
positioned just after the pattern found.
The commands to create bindable widgets are similar to those in the example im-
mediately above:
autoload -U history-pattern-search
zle -N history-pattern-search-backward history-pattern-search
zle -N history-pattern-search-forward history-pattern-search
incarg Typing the keystrokes for this widget with the cursor placed on or to the left of
an integer causes that integer to be incremented by one. With a numeric prex
argument, the number is incremented by the amount of the argument (decremented
if the prex argument is negative). The shell parameter incarg may be set to
change the default increment to something other than one.
bindkey ^X+ incarg
incremental-complete-word
This allows incremental completion of a word. After starting this command, a list
of completion choices can be shown after every character you type, which you can
delete with ^H or DEL. Pressing return accepts the completion so far and returns you
Chapter 26: User Contributions 367
to normal editing (that is, the command line is not immediately executed). You can
hit TAB to do normal completion, ^G to abort back to the state when you started,
and ^D to list the matches.
This works only with the new function based completion system.
bindkey ^Xi incremental-complete-word
insert-composed-char
This function allows you to compose characters that dont appear on the keyboard
to be inserted into the command line. The command is followed by two keys cor-
responding to ASCII characters (there is no prompt). For accented characters, the
two keys are a base character followed by a code for the accent, while for other
special characters the two characters together form a mnemonic for the character to
be inserted. The two-character codes are a subset of those given by RFC 1345 (see
for example http://www.faqs.org/rfcs/rfc1345.html).
The function may optionally be followed by up to two characters which replace one
or both of the characters read from the keyboard; if both characters are supplied,
no input is read. For example, insert-composed-char a: can be used within a
widget to insert an a with umlaut into the command line. This has the advantages
over use of a literal character that it is more portable.
For best results zsh should have been built with support for multibyte characters
(congured with --enable-multibyte); however, the function works for the limited
range of characters available in single-byte character sets such as ISO-8859-1.
The character is converted into the local representation and inserted into the com-
mand line at the cursor position. (The conversion is done within the shell, using
whatever facilities the C library provides.) With a numeric argument, the character
and its code are previewed in the status line
The function may be run outside zle in which case it prints the character (together
with a newline) to standard output. Input is still read from keystrokes.
See insert-unicode-char for an alternative way of inserting Unicode characters
using their hexadecimal character number.
The set of accented characters is reasonably complete up to Unicode character
U+0180, the set of special characters less so. However, it is very sporadic from that
point. Adding new characters is easy, however; see the function define-composed-
chars. Please send any additions to [email protected].
The codes for the second character when used to accent the rst are as follows. Note
that not every character can take every accent.
! Grave.
Acute.
> Circumex.
? Tilde. (This is not ~ as RFC 1345 does not assume that character is
present on the keyboard.)
- Macron. (A horizontal bar over the base character.)
( Breve. (A shallow dish shape over the base character.)
. Dot above the base character, or in the case of i no dot, or in the case
of L and l a centered dot.
: Diaeresis (Umlaut).
c Cedilla.
Chapter 26: User Contributions 368
_ Underline, however there are currently no underlined characters.
/ Stroke through the base character.
" Double acute (only supported on a few letters).
; Ogonek. (A little forward facing hook at the bottom right of the char-
acter.)
< Caron. (A little v over the letter.)
0 Circle over the base character.
2 Hook over the base character.
9 Horn over the base character.
The most common characters from the Arabic, Cyrillic, Greek and Hebrew alphabets
are available; consult RFC 1345 for the appropriate sequences. In addition, a set
of two letter codes not in RFC 1345 are available for the double-width characters
corresponding to ASCII characters from ! to ~ (0x21 to 0x7e) by preceding the
character with ^, for example ^A for a double-width A.
The following other two-character sequences are understood.
ASCII characters
These are already present on most keyboards:
<( Left square bracket
// Backslash (solidus)
)> Right square bracket
(! Left brace (curly bracket)
!! Vertical bar (pipe symbol)
!) Right brace (curly bracket)
? Tilde
Special letters
Characters found in various variants of the Latin alphabet:
ss Eszett (scharfes S)
D-, d- Eth
TH, th Thorn
kk Kra
n n
NG, ng Ng
OI, oi Oi
yr yr
ED ezh
Currency symbols
Ct Cent
Pd Pound sterling (also lira and others)
Cu Currency
Chapter 26: User Contributions 369
Ye Yen
Eu Euro (N.B. not in RFC 1345)
Punctuation characters
References to "right" quotes indicate the shape (like a 9 rather than 6)
rather than their grammatical use. (For example, a "right" low double
quote is used to open quotations in German.)
!I Inverted exclamation mark
BB Broken vertical bar
SE Section
Co Copyright
-a Spanish feminine ordinal indicator
<< Left guillemet
-- Soft hyphen
Rg Registered trade mark
PI Pilcrow (paragraph)
-o Spanish masculine ordinal indicator
>> Right guillemet
?I Inverted question mark
-1 Hyphen
-N En dash
-M Em dash
-3 Horizontal bar
:3 Vertical ellipsis
.3 Horizontal midline ellipsis
!2 Double vertical line
=2 Double low line
6 Left single quote
9 Right single quote
.9 "Right" low quote
9 Reversed "right" quote
"6 Left double quote
"9 Right double quote
:9 "Right" low double quote
9" Reversed "right" double quote
/- Dagger
/= Double dagger
Mathematical symbols
DG Degree
Chapter 26: User Contributions 370
-2, +-, -+ - sign, +/- sign, -/+ sign
2S Superscript 2
3S Superscript 3
1S Superscript 1
My Micro
.M Middle dot
14 Quarter
12 Half
34 Three quarters
*X Multiplication
-: Division
%0 Per mille
FA, TE, /0 For all, there exists, empty set
dP, DE, NB Partial derivative, delta (increment), del (nabla)
(-, -) Element of, contains
*P, +Z Product, sum
*-, Ob, Sb Asterisk, ring, bullet
RT, 0(, 00 Root sign, proportional to, innity
Other symbols
cS, cH, cD, cC
Card suits: spades, hearts, diamonds, clubs
Md, M8, M2, Mb, Mx, MX
Musical notation: crotchet (quarter note), quaver (eighth
note), semiquavers (sixteenth notes), ag sign, natural sign,
sharp sign
Fm, Ml Female, male
Accents on their own
> Circumex (same as caret, ^)
! Grave (same as backtick, )
, Cedilla
: Diaeresis (Umlaut)
m Macron
Acute
insert-files
This function allows you type a le pattern, and see the results of the expansion at
each step. When you hit return, all expansions are inserted into the command line.
bindkey ^Xf insert-files
Chapter 26: User Contributions 371
insert-unicode-char
When rst executed, the user inputs a set of hexadecimal digits. This is terminated
with another call to insert-unicode-char. The digits are then turned into the
corresponding Unicode character. For example, if the widget is bound to ^XU, the
character sequence ^XU 4 c ^XU inserts L (Unicode U+004c).
See insert-composed-char for a way of inserting characters using a two-character
mnemonic.
narrow-to-region [ -p pre ] [ -P post ]
[ -S statepm | -R statepm ] [ -n ] [ start end ])
narrow-to-region-invisible
Narrow the editable portion of the buer to the region between the cursor and the
mark, which may be in either order. The region may not be empty.
narrow-to-region may be used as a widget or called as a function from a user-
dened widget; by default, the text outside the editable area remains visible. A
recursive-edit is performed and the original widening status is then restored.
Various options and arguments are available when it is called as a function.
The options -p pretext and -P posttext may be used to replace the text before and
after the display for the duration of the function; either or both may be an empty
string.
If the option -n is also given, pretext or posttext will only be inserted if there is
text before or after the region respectively which will be made invisible.
Two numeric arguments may be given which will be used instead of the cursor and
mark positions.
The option -S statepm is used to narrow according to the other options while saving
the original state in the parameter with name statepm, while the option -R statepm
is used to restore the state from the parameter; note in both cases the name of
the parameter is required. In the second case, other options and arguments are
irrelevant. When this method is used, no recursive-edit is performed; the calling
widget should call this function with the option -S, perform its own editing on the
command line or pass control to the user via zle recursive-edit, then call this
function with the option -R. The argument statepm must be a suitable name for
an ordinary parameter, except that parameters beginning with the prex _ntr_ are
reserved for use within narrow-to-region. Typically the parameter will be local
to the calling function.
narrow-to-region-invisible is a simple widget which calls narrow-to-region
with arguments which replace any text outside the region with ....
The display is restored (and the widget returns) upon any zle command which would
usually cause the line to be accepted or aborted. Hence an additional such command
is required to accept or abort the current line.
The return status of both widgets is zero if the line was accepted, else non-zero.
Here is a trivial example of a widget using this feature.
local state
narrow-to-region -p $Editing restricted region\n \
-P -S state
zle recursive-edit
narrow-to-region -R state
predict-on
This set of functions implements predictive typing using history search. After
predict-on, typing characters causes the editor to look backward in the history
Chapter 26: User Contributions 372
for the rst line beginning with what you have typed so far. After predict-off,
editing returns to normal for the line found. In fact, you often dont even need to
use predict-off, because if the line doesnt match something in the history, adding
a key performs standard completion, and then inserts itself if no completions were
found. However, editing in the middle of a line is liable to confuse prediction; see
the toggle style below.
With the function based completion system (which is needed for this), you should be
able to type TAB at almost any point to advance the cursor to the next interesting
character position (usually the end of the current word, but sometimes somewhere
in the middle of the word). And of course as soon as the entire line is what you
want, you can accept with return, without needing to move the cursor to the end
rst.
The rst time predict-on is used, it creates several additional widget functions:
delete-backward-and-predict
Replaces the backward-delete-char widget. You do not need to bind
this yourself.
insert-and-predict
Implements predictive typing by replacing the self-insert widget.
You do not need to bind this yourself.
predict-off
Turns o predictive typing.
Although you autoload only the predict-on function, it is necessary to create a
keybinding for predict-off as well.
zle -N predict-on
zle -N predict-off
bindkey ^X^Z predict-on
bindkey ^Z predict-off
read-from-minibuffer
This is most useful when called as a function from inside a widget, but will work
correctly as a widget in its own right. It prompts for a value below the current
command line; a value may be input using all of the standard zle operations (and
not merely the restricted set available when executing, for example, execute-named-
cmd). The value is then returned to the calling function in the parameter $REPLY
and the editing buer restored to its previous state. If the read was aborted by a
keyboard break (typically ^G), the function returns status 1 and $REPLY is not set.
If one argument is supplied to the function it is taken as a prompt, otherwise ?
is used. If two arguments are supplied, they are the prompt and the initial value
of $LBUFFER, and if a third argument is given it is the initial value of $RBUFFER.
This provides a default value and starting cursor placement. Upon return the entire
buer is the value of $REPLY.
One option is available: -k num species that num characters are to be read instead
of a whole line. The line editor is not invoked recursively in this case, so depending
on the terminal settings the input may not be visible, and only the input keys are
placed in $REPLY, not the entire buer. Note that unlike the read builtin num must
be given; there is no default.
The name is a slight misnomer, as in fact the shells own minibuer is not used.
Hence it is still possible to call executed-named-cmd and similar functions while
reading a value.
Chapter 26: User Contributions 373
replace-argument, replace-argument-edit
The function replace-argument can be used to replace a command line argument
in the current command line or, if the current command line is empty, in the last
command line executed (the new command line is not executed). Arguments are as
delimited by standard shell syntax,
If a numeric argument is given, that species the argument to be replaced. 0 means
the command name, as in history expansion. A negative numeric argument counts
backward from the last word.
If no numeric argument is given, the current argument is replaced; this is the last
argument if the previous history line is being used.
The function prompts for a replacement argument.
If the widget contains the string edit, for example is dened as
zle -N replace-argument-edit replace-argument
then the function presents the current value of the argument for editing, otherwise
the editing buer for the replacement is initially empty.
replace-string, replace-pattern
replace-string-again, replace-pattern-again
The function replace-string implements three widgets. If dened under the same
name as the function, it prompts for two strings; the rst (source) string will be
replaced by the second everywhere it occurs in the line editing buer.
If the widget name contains the word pattern, for example by dening the widget
using the command zle -N replace-pattern replace-string, then the match-
ing is performed using zsh patterns. All zsh extended globbing patterns can be used
in the source string; note that unlike lename generation the pattern does not need
to match an entire word, nor do glob qualiers have any eect. In addition, the
replacement string can contain parameter or command substitutions. Furthermore,
a & in the replacement string will be replaced with the matched source string,
and a backquoted digit \N will be replaced by the Nth parenthesised expression
matched. The form \{N} may be used to protect the digit from following digits.
If the widget instead contains the word regex (or regexp), then the match-
ing is performed using regular expressions, respecting the setting of the option
RE_MATCH_PCRE (see the description of the function regexp-replace below). The
special replacement facilities described above for pattern matching are available.
By default the previous source or replacement string will not be oered for editing.
However, this feature can be activated by setting the style edit-previous in the
context :zle:widget (for example, :zle:replace-string) to true. In addition,
a positive numeric argument forces the previous values to be oered, a negative or
zero argument forces them not to be.
The function replace-string-again can be used to repeat the previous replace-
ment; no prompting is done. As with replace-string, if the name of the widget
contains the word pattern or regex, pattern or regular expression matching is
performed, else a literal string replacement. Note that the previous source and re-
placement text are the same whether pattern, regular expression or string matching
is used.
In addition, replace-string shows the previous replacement above the prompt,
so long as there was one during the current session; if the source string is empty,
that replacement will be repeated without the widget prompting for a replacement
string.
For example, starting from the line:
Chapter 26: User Contributions 374
print This line contains fan and fond
and invoking replace-pattern with the source string f(?)n and the replacement
string c\1r produces the not very useful line:
print This line contains car and cord
The range of the replacement string can be limited by using the narrow-to-region-
invisible widget. One limitation of the current version is that undo will cycle
through changes to the replacement and source strings before undoing the replace-
ment itself.
send-invisible
This is similar to read-from-minibuer in that it may be called as a function from a
widget or as a widget of its own, and interactively reads input from the keyboard.
However, the input being typed is concealed and a string of asterisks (*) is shown
instead. The value is saved in the parameter $INVISIBLE to which a reference is in-
serted into the editing buer at the restored cursor position. If the read was aborted
by a keyboard break (typically ^G) or another escape from editing such as push-
line, $INVISIBLE is set to empty and the original buer is restored unchanged.
If one argument is supplied to the function it is taken as a prompt, otherwise Non-
echoed text: is used (as in emacs). If a second and third argument are supplied
they are used to begin and end the reference to $INVISIBLE that is inserted into
the buer. The default is to open with ${, then INVISIBLE, and close with }, but
many other eects are possible.
smart-insert-last-word
This function may replace the insert-last-word widget, like so:
zle -N insert-last-word smart-insert-last-word
With a numeric prex, or when passed command line arguments in a call from
another widget, it behaves like insert-last-word, except that words in comments
are ignored when INTERACTIVE_COMMENTS is set.
Otherwise, the rightmost interesting word from the previous command is found
and inserted. The default denition of interesting is that the word contains at
least one alphabetic character, slash, or backslash. This denition may be overridden
by use of the match style. The context used to look up the style is the widget name,
so usually the context is :insert-last-word. However, you can bind this function
to dierent widgets to use dierent patterns:
zle -N insert-last-assignment smart-insert-last-word
zstyle :insert-last-assignment match [[:alpha:]][][[:alnum:]]#=*
bindkey \e= insert-last-assignment
If no interesting word is found and the auto-previous style is set to a true value,
the search continues upward through the history. When auto-previous is unset or
false (the default), the widget must be invoked repeatedly in order to search earlier
history lines.
transpose-lines
Only useful with a multi-line editing buer; the lines here are lines within the current
on-screen buer, not history lines. The eect is similar to the function of the same
name in Emacs.
Transpose the current line with the previous line and move the cursor to the start
of the next line. Repeating this (which can be done by providing a positive numeric
prex argument) has the eect of moving the line above the cursor down by a number
of lines.
Chapter 26: User Contributions 375
With a negative numeric prex argument, requires two lines above the cursor. These
two lines are transposed and the cursor moved to the start of the previous line. Using
a numeric prex less than -1 has the eect of moving the line above the cursor up
by minus that number of lines.
which-command
This function is a drop-in replacement for the builtin widget which-command. It has
enhanced behaviour, in that it correctly detects whether or not the command word
needs to be expanded as an alias; if so, it continues tracing the command word from
the expanded alias until it reaches the command that will be executed.
The style whence is available in the context :zle:$WIDGET; this may be set to an
array to give the command and options that will be used to investigate the command
word found. The default is whence -c.
zcalc-auto-insert
This function is useful together with the zcalc function described in Section 26.9
[Mathematical Functions], page 384. It should be bound to a key representing a
binary operator such as +, -, * or /. When running in zcalc, if the key occurs at
the start of the line or immediately following an open parenthesis, the text "ans " is
inserted before the representation of the key itself. This allows easy use of the answer
from the previous calculation in the current line. The text to be inserted before the
symbol typed can be modied by setting the variable ZCALC_AUTO_INSERT_PREFIX.
Hence, for example, typing +12 followed by return adds 12 to the previous result.
When not in zcalc, the key simply inserts the symbol itself.
26.6.2 Utility Functions
These functions are useful in constructing widgets. They should be loaded with autoload -U
function and called as indicated from user-dened widgets.
split-shell-arguments
This function splits the line currently being edited into shell arguments and white-
space. The result is stored in the array reply. The array contains all the parts
of the line in order, starting with any whitespace before the rst argument, and
nishing with any whitespace after the last argument. Hence (so long as the option
KSH_ARRAYS is not set) whitespace is given by odd indices in the array and argu-
ments by even indices. Note that no stripping of quotes is done; joining together all
the elements of reply in order is guaranteed to produce the original line.
The parameter REPLY is set to the index of the word in reply which contains the
character after the cursor, where the rst element has index 1. The parameter
REPLY2 is set to the index of the character under the cursor in that word, where the
rst character has index 1.
Hence reply, REPLY and REPLY2 should all be made local to the enclosing function.
See the function modify-current-argument, described below, for an example of
how to call this function.
modify-current-argument [ expr-using-$ARG | func ]
This function provides a simple method of allowing user-dened widgets to modify
the command line argument under the cursor (or immediately to the left of the
cursor if the cursor is between arguments).
The argument can be an expression which when evaluated operates on the shell
parameter ARG, which will have been set to the command line argument under the
Chapter 26: User Contributions 376
cursor. The expression should be suitably quoted to prevent it being evaluated too
early.
Alternatively, if the argument does not contain the string ARG, it is assumed to be
a shell function, to which the current command line argument is passed as the only
argument. The function should set the variable REPLY to the new value for the
command line argument. If the function returns non-zero status, so does the calling
function.
For example, a user-dened widget containing the following code converts the char-
acters in the argument under the cursor into all upper case:
modify-current-argument ${(U)ARG}
The following strips any quoting from the current word (whether backslashes or one
of the styles of quotes), and replaces it with single quoting throughout:
modify-current-argument ${(qq)${(Q)ARG}}
The following performs directory expansion on the command line argument and
replaces it by the absolute path:
expand-dir() {
REPLY=${~1}
REPLY=${REPLY:a}
}
modify-current-argument expand-dir
In practice the function expand-dir would probably not be dened within the wid-
get where modify-current-argument is called.
26.6.3 Styles
The behavior of several of the above widgets can be controlled by the use of the zstyle mech-
anism. In particular, widgets that interact with the completion system pass along their context
to any completions that they invoke.
break-keys
This style is used by the incremental-complete-word widget. Its value should
be a pattern, and all keys matching this pattern will cause the widget to stop
incremental completion without the key having any further eect. Like all styles
used directly by incremental-complete-word, this style is looked up using the
context :incremental.
completer
The incremental-complete-word and insert-and-predict widgets set up their
top-level context name before calling completion. This allows one to dene dier-
ent sets of completer functions for normal completion and for these widgets. For
example, to use completion, approximation and correction for normal completion,
completion and correction for incremental completion and only completion for pre-
diction one could use:
zstyle :completion:* completer \
_complete _correct _approximate
zstyle :completion:incremental:* completer \
_complete _correct
zstyle :completion:predict:* completer \
_complete
It is a good idea to restrict the completers used in prediction, because they may
be automatically invoked as you type. The _list and _menu completers should
Chapter 26: User Contributions 377
never be used with prediction. The _approximate, _correct, _expand, and _match
completers may be used, but be aware that they may change characters anywhere
in the word behind the cursor, so you need to watch carefully that the result is what
you intended.
cursor The insert-and-predict widget uses this style, in the context :predict, to de-
cide where to place the cursor after completion has been tried. Values are:
complete The cursor is left where it was when completion nished, but only if it
is after a character equal to the one just inserted by the user. If it is
after another character, this value is the same as key.
key The cursor is left after the nth occurrence of the character just inserted,
where n is the number of times that character appeared in the word
before completion was attempted. In short, this has the eect of leaving
the cursor after the character just typed even if the completion code
found out that no other characters need to be inserted at that position.
Any other value for this style unconditionally leaves the cursor at the position where
the completion code left it.
list When using the incremental-complete-word widget, this style says if the matches
should be listed on every key press (if they t on the screen). Use the context prex
:completion:incremental.
The insert-and-predict widget uses this style to decide if the completion should
be shown even if there is only one possible completion. This is done if the value
of this style is the string always. In this case the context is :predict (not
:completion:predict).
match This style is used by smart-insert-last-word to provide a pattern (using full
EXTENDED_GLOB syntax) that matches an interesting word. The context is the name
of the widget to which smart-insert-last-word is bound (see above). The default
behavior of smart-insert-last-word is equivalent to:
zstyle :insert-last-word match *[[:alpha:]/\\]*
However, you might want to include words that contain spaces:
zstyle :insert-last-word match *[[:alpha:][:space:]/\\]*
Or include numbers as long as the word is at least two characters long:
zstyle :insert-last-word match *([[:digit:]]?|[[:alpha:]/\\])*
The above example causes redirections like "2>" to be included.
prompt The incremental-complete-word widget shows the value of this style in the sta-
tus line during incremental completion. The string value may contain any of the
following substrings in the manner of the PS1 and other prompt parameters:
%c Replaced by the name of the completer function that generated the
matches (without the leading underscore).
%l When the list style is set, replaced by ... if the list of matches is
too long to t on the screen and with an empty string otherwise. If the
list style is false or not set, %l is always removed.
%n Replaced by the number of matches generated.
%s Replaced by -no match-, -no prefix-, or an empty string if there
is no completion matching the word on the line, if the matches have no
common prex dierent from the word on the line, or if there is such a
common prex, respectively.
Chapter 26: User Contributions 378
%u Replaced by the unambiguous part of all matches, if there is any, and
if it is dierent from the word on the line.
Like break-keys, this uses the :incremental context.
stop-keys
This style is used by the incremental-complete-word widget. Its value is
treated similarly to the one for the break-keys style (and uses the same context:
:incremental). However, in this case all keys matching the pattern given as its
value will stop incremental completion and will then execute their usual function.
toggle This boolean style is used by predict-on and its related widgets in the context
:predict. If set to one of the standard true values, predictive typing is auto-
matically toggled o in situations where it is unlikely to be useful, such as when
editing a multi-line buer or after moving into the middle of a line and then deleting
a character. The default is to leave prediction turned on until an explicit call to
predict-off.
verbose This boolean style is used by predict-on and its related widgets in the context
:predict. If set to one of the standard true values, these widgets display a
message below the prompt when the predictive state is toggled. This is most useful
in combination with the toggle style. The default does not display these messages.
widget This style is similar to the command style: For widget functions that use zle to
call other widgets, this style can sometimes be used to override the widget which is
called. The context for this style is the name of the calling widget (not the name of
the calling function, because one function may be bound to multiple widget names).
zstyle :copy-earlier-word widget smart-insert-last-word
Check the documentation for the calling widget or function to determine whether
the widget style is used.
26.7 Exception Handling
Two functions are provided to enable zsh to provide exception handling in a form that should
be familiar from other languages.
throw exception
The function throw throws the named exception. The name is an arbitrary string
and is only used by the throw and catch functions. An exception is for the most
part treated the same as a shell error, i.e. an unhandled exception will cause the
shell to abort all processing in a function or script and to return to the top level in
an interactive shell.
catch exception-pattern
The function catch returns status zero if an exception was thrown and the
pattern exception-pattern matches its name. Otherwise it returns status 1.
exception-pattern is a standard shell pattern, respecting the current setting of the
EXTENDED_GLOB option. An alias catch is also dened to prevent the argument to
the function from matching lenames, so patterns may be used unquoted. Note that
as exceptions are not fundamentally dierent from other shell errors it is possible
to catch shell errors by using an empty string as the exception name. The shell
variable CAUGHT is set by catch to the name of the exception caught. It is possible
to rethrow an exception by calling the throw function again once an exception has
been caught.
Chapter 26: User Contributions 379
The functions are designed to be used together with the always construct described in Section 6.3
[Complex Commands], page 10. This is important as only this construct provides the required
support for exceptions. A typical example is as follows.
{
# "try" block
# ... nested code here calls "throw MyExcept"
} always {
# "always" block
if catch MyExcept; then
print "Caught exception MyExcept"
elif catch ; then
print "Caught a shell error. Propagating..."
throw
fi
# Other exceptions are not handled but may be caught further
# up the call stack.
}
If all exceptions should be caught, the following idiom might be preferable.
{
# ... nested code here throws an exception
} always {
if catch *; then
case $CAUGHT in
(MyExcept)
print "Caught my own exception"
;;
(*)
print "Caught some other exception"
;;
esac
fi
}
In common with exception handling in other languages, the exception may be thrown by code
deeply nested inside the try block. However, note that it must be thrown inside the current
shell, not in a subshell forked for a pipeline, parenthesised current-shell construct, or some form
of command or process substitution.
The system internally uses the shell variable EXCEPTION to record the name of the exception
between throwing and catching. One drawback of this scheme is that if the exception is not
handled the variable EXCEPTION remains set and may be incorrectly recognised as the name of
an exception if a shell error subsequently occurs. Adding unset EXCEPTION at the start of the
outermost layer of any code that uses exception handling will eliminate this problem.
26.8 MIME Functions
Three functions are available to provide handling of les recognised by extension, for example
to dispatch a le text.ps when executed as a command to an appropriate viewer.
zsh-mime-setup [ -fv ] [ -l [ sux ... ] ]
zsh-mime-handler [-l] command arguments ...
These two functions use the les ~/.mime.types and /etc/mime.types, which as-
sociate types and extensions, as well as ~/.mailcap and /etc/mailcap les, which
Chapter 26: User Contributions 380
associate types and the programs that handle them. These are provided on many
systems with the Multimedia Internet Mail Extensions.
To enable the system, the function zsh-mime-setup should be autoloaded and run.
This allows les with extensions to be treated as executable; such les be completed
by the function completion system. The function zsh-mime-handler should not
need to be called by the user.
The system works by setting up sux aliases with alias -s. Sux aliases already
installed by the user will not be overwritten.
For suxes dened in lower case, upper case variants will also automatically be
handled (e.g. PDF is automatically handled if handling for the sux pdf is dened),
but not vice versa.
Repeated calls to zsh-mime-setup do not override the existing mapping between
suxes and executable les unless the option -f is given. Note, however, that this
does not override existing sux aliases assigned to handlers other than zsh-mime-
handler.
Calling zsh-mime-setup with the option -l lists the existing mappings without
altering them. Suxes to list (which may contain pattern characters that should
be quoted from immediate interpretation on the command line) may be given as
additional arguments, otherwise all suxes are listed.
Calling zsh-mime-setup with the option -v causes verbose output to be shown
during the setup operation.
The system respects the mailcap ags needsterminal and copiousoutput, see
man page mailcap(4).
The functions use the following styles, which are dened with the zstyle builtin
command (Section 22.34 [The zsh/zutil Module], page 304). They should be de-
ned before zsh-mime-setup is run. The contexts used all start with :mime:, with
additional components in some cases. It is recommended that a trailing * (suitably
quoted) be appended to style patterns in case the system is extended in future.
Some examples are given below.
For les that have multiple suxes, e.g. .pdf.gz, where the context includes the
sux it will be looked up starting with the longest possible sux until a match for
the style is found. For example, if .pdf.gz produces a match for the handler, that
will be used; otherwise the handler for .gz will be used. Note that, owing to the
way sux aliases work, it is always required that there be a handler for the shortest
possible sux, so in this example .pdf.gz can only be handled if .gz is also handled
(though not necessarily in the same way). Alternatively, if no handling for .gz on
its own is needed, simply adding the command
alias -s gz=zsh-mime-handler
to the initialisation code is sucient; .gz will not be handled on its own, but may
be in combination with other suxes.
current-shell
If this boolean style is true, the mailcap handler for the context in
question is run using the eval builtin instead of by starting a new sh
process. This is more ecient, but may not work in the occasional cases
where the mailcap handler uses strict POSIX syntax.
disown If this boolean style is true, mailcap handlers started in the background
will be disowned, i.e. not subject to job control within the parent shell.
Such handlers nearly always produce their own windows, so the only
Chapter 26: User Contributions 381
likely harmful side eect of setting the style is that it becomes harder
to kill jobs from within the shell.
execute-as-is
This style gives a list of patterns to be matched against les passed for
execution with a handler program. If the le matches the pattern, the
entire command line is executed in its current form, with no handler.
This is useful for les which might have suxes but nonetheless be exe-
cutable in their own right. If the style is not set, the pattern *(*) *(/)
is used; hence executable les are executed directly and not passed to a
handler, and the option AUTO_CD may be used to change to directories
that happen to have MIME suxes.
execute-never
This style is useful in combination with execute-as-is. It is set to
an array of patterns corresponding to full paths to les that should
never be treated as executable, even if the le passed to the MIME han-
dler matches execute-as-is. This is useful for le systems that dont
handle execute permission or that contain executables from another op-
erating system. For example, if /mnt/windows is a Windows mount,
then
zstyle :mime:* execute-never /mnt/windows/*
will ensure that any les found in that area will be executed as MIME
types even if they are executable. As this example shows, the complete
le name is matched against the pattern, regardless of how the le was
passed to the handler. The le is resolved to a full path using the :A
modier described in Section 14.1.4 [Modiers], page 40; this means
that symbolic links are resolved where possible, so that links into other
le systems behave in the correct fashion.
file-path
Used if the style find-file-in-path is true for the same context. Set
to an array of directories that are used for searching for the le to be
handled; the default is the command path given by the special param-
eter path. The shell option PATH_DIRS is respected; if that is set, the
appropriate path will be searched even if the name of the le to be han-
dled as it appears on the command line contains a /. The full context
is :mime:.sux:, as described for the style handler.
find-file-in-path
If set, allows les whose names do not contain absolute paths to be
searched for in the command path or the path specied by the file-
path style. If the le is not found in the path, it is looked for locally
(whether or not the current directory is in the path); if it is not found
locally, the handler will abort unless the handle-nonexistent style
is set. Files found in the path are tested as described for the style
execute-as-is. The full context is :mime:.sux:, as described for
the style handler.
flags Denes ags to go with a handler; the context is as for the handler
style, and the format is as for the ags in mailcap.
handle-nonexistent
By default, arguments that dont correspond to les are not passed to
the MIME handler in order to prevent it from intercepting commands
Chapter 26: User Contributions 382
found in the path that happen to have suxes. This style may be set to
an array of extended glob patterns for arguments that will be passed to
the handler even if they dont exist. If it is not explicitly set it defaults
to [[:alpha:]]#:/* which allows URLs to be passed to the MIME
handler even though they dont exist in that format in the le system.
The full context is :mime:.sux:, as described for the style handler.
handler Species a handler for a sux; the sux is given by the context
as :mime:.sux:, and the format of the handler is exactly that in
mailcap. Note in particular the . and trailing colon to distinguish
this use of the context. This overrides any handler specied by the
mailcap les. If the handler requires a terminal, the flags style should
be set to include the word needsterminal, or if the output is to be
displayed through a pager (but not if the handler is itself a pager), it
should include copiousoutput.
mailcap A list of les in the format of ~/.mailcap and /etc/mailcap to be read
during setup, replacing the default list which consists of those two les.
The context is :mime:. A + in the list will be replaced by the default
les.
mailcap-priorities
This style is used to resolve multiple mailcap entries for the same MIME
type. It consists of an array of the following elements, in descending
order of priority; later entries will be used if earlier entries are unable
to resolve the entries being compared. If none of the tests resolve the
entries, the rst entry encountered is retained.
files The order of les (entries in the mailcap style) read. Earlier
les are preferred. (Note this does not resolve entries in the
same le.)
priority The priority ag from the mailcap entry. The priority is an
integer from 0 to 9 with the default value being 5.
flags The test given by the mailcap-prio-flags option is used
to resolve entries.
place Later entries are preferred; as the entries are strictly or-
dered, this test always succeeds.
Note that as this style is handled during initialisation, the context is
always :mime:, with no discrimination by sux.
mailcap-prio-flags
This style is used when the keyword flags is encountered in the list of
tests specied by the mailcap-priorities style. It should be set to a
list of patterns, each of which is tested against the ags specied in the
mailcap entry (in other words, the sets of assignments found with some
entries in the mailcap le). Earlier patterns in the list are preferred to
later ones, and matched patterns are preferred to unmatched ones.
mime-types
A list of les in the format of ~/.mime.types and /etc/mime.types to
be read during setup, replacing the default list which consists of those
two les. The context is :mime:. A + in the list will be replaced by the
default les.
Chapter 26: User Contributions 383
never-background
If this boolean style is set, the handler for the given context is always
run in the foreground, even if the ags provided in the mailcap entry
suggest it need not be (for example, it doesnt require a terminal).
pager If set, will be used instead of $PAGER or more to handle suxes where
the copiousoutput ag is set. The context is as for handler, i.e.
:mime:.sux: for handling a le with the given sux.
Examples:
zstyle :mime:* mailcap ~/.mailcap /usr/local/etc/mailcap
zstyle :mime:.txt: handler less %s
zstyle :mime:.txt: flags needsterminal
When zsh-mime-setup is subsequently run, it will look for mailcap entries in the
two les given. Files of sux .txt will be handled by running less le.txt. The
ag needsterminal is set to show that this program must run attached to a terminal.
As there are several steps to dispatching a command, the following should be checked
if attempting to execute a le by extension .ext does not have the expected eect.
The command alias -s ext should show ps=zsh-mime-handler. If it shows
something else, another sux alias was already installed and was not overwritten.
If it shows nothing, no handler was installed: this is most likely because no handler
was found in the .mime.types and mailcap combination for .ext les. In that
case, appropriate handling should be added to ~/.mime.types and mailcap.
If the extension is handled by zsh-mime-handler but the le is not opened correctly,
either the handler dened for the type is incorrect, or the ags associated with it are
in appropriate. Running zsh-mime-setup -l will show the handler and, if there
are any, the ags. A %s in the handler is replaced by the le (suitably quoted if
necessary). Check that the handler program listed lists and can be run in the way
shown. Also check that the ags needsterminal or copiousoutput are set if the
handler needs to be run under a terminal; the second ag is used if the output should
be sent to a pager. An example of a suitable mailcap entry for such a program is:
text/html; /usr/bin/lynx %s; needsterminal
Running zsh-mime-handler -l command line prints the command line that would
be executed, simplied to remove the eect of any ags, and quoted so that the
output can be run as a complete zsh command line. This is used by the completion
system to decide how to complete after a le handled by zsh-mime-setup.
pick-web-browser
This function is separate from the two MIME functions described above and can be
assigned directly to a sux:
autoload -U pick-web-browser
alias -s html=pick-web-browser
It is provided as an intelligent front end to dispatch a web browser. It may be run
as either a function or a shell script. The status 255 is returned if no browser could
be started.
Various styles are available to customize the choice of browsers:
browser-style
The value of the style is an array giving preferences in decreasing order
for the type of browser to use. The values of elements may be
running Use a GUI browser that is already running when an X
Window display is available. The browsers listed in the
Chapter 26: User Contributions 384
x-browsers style are tried in order until one is found; if
it is, the le will be displayed in that browser, so the user
may need to check whether it has appeared. If no running
browser is found, one is not started. Browsers other than
Firefox, Opera and Konqueror are assumed to understand
the Mozilla syntax for opening a URL remotely.
x Start a new GUI browser when an X Window display is
available. Search for the availability of one of the browsers
listed in the x-browsers style and start the rst one that
is found. No check is made for an already running browser.
tty Start a terminal-based browser. Search for the availability
of one of the browsers listed in the tty-browsers style and
start the rst one that is found.
If the style is not set the default running x tty is used.
x-browsers
An array in decreasing order of preference of browsers to use when run-
ning under the X Window System. The array consists of the command
name under which to start the browser. They are looked up in the
context :mime: (which may be extended in future, so appending * is
recommended). For example,
zstyle :mime:* x-browsers opera konqueror firefox
species that pick-web-browser should rst look for a running instance
of Opera, Konqueror or Firefox, in that order, and if it fails to nd
any should attempt to start Opera. The default is firefox mozilla
netscape opera konqueror.
tty-browsers
An array similar to x-browsers, except that it gives browsers to use
when no X Window display is available. The default is elinks links
lynx.
command If it is set this style is used to pick the command used to open a page
for a browser. The context is :mime:browser:new:$browser: to start
a new browser or :mime:browser:running:$browser: to open a URL
in a browser already running on the current X display, where $browser
is the value matched in the x-browsers or tty-browsers style. The
escape sequence %b in the styles value will be replaced by the browser,
while %u will be replaced by the URL. If the style is not set, the default
for all new instances is equivalent to %b %u and the defaults for using
running browsers are equivalent to the values kfmclient openURL %u
for Konqueror, firefox -new-tab %u for Firefox, opera -newpage %u
for Opera, and %b -remote "openUrl(%u)" for all others.
26.9 Mathematical Functions
zcalc [ -ef ] [ expression ... ]
A reasonably powerful calculator based on zshs arithmetic evaluation facility.
The syntax is similar to that of formulae in most programming languages; see
Chapter 11 [Arithmetic Evaluation], page 26 for details. The mathematical library
zsh/mathfunc will be loaded if it is available; see Section 22.16 [The zsh/mathfunc
Chapter 26: User Contributions 385
Module], page 280. The mathematical functions correspond to the raw system li-
braries, so trigonometric functions are evaluated using radians, and so on.
Each line typed is evaluated as an expression. The prompt shows a number, which
corresponds to a positional parameter where the result of that calculation is stored.
For example, the result of the calculation on the line preceded by 4> is available
as $4. The last value calculated is available as ans. Full command line editing,
including the history of previous calculations, is available; the history is saved in
the le ~/.zcalc_history. To exit, enter a blank line or type :q on its own (q
is allowed for historical compatibility).
A line ending with a single backslash is treated in the same fashion as it is in
command line editing: the backslash is removed, the function prompts for more
input (the prompt is preceded by ... to indicate this), and the lines are combined
into one to get the nal result. In addition, if the input so far contains more open
than close parentheses zcalc will prompt for more input.
If arguments are given to zcalc on start up, they are used to prime the rst few
positional parameters. A visual indication of this is given when the calculator starts.
The constants PI (3.14159...) and E (2.71828...) are provided. Parameter assign-
ment is possible, but note that all parameters will be put into the global namespace.
The output base can be initialised by passing the option -#base, for example zcalc
-#16 (the # may have to be quoted, depending on the globbing options set).
If the option -e is set, the function runs non-interactively: the arguments are
treated as expressions to be evaluated as if entered interactively line by line.
If the option -f is set, all numbers are treated as oating point, hence for example
the expression 3/4 evaluates to 0.75 rather than 0. Options must appear in separate
words.
The prompt is congurable via the parameter ZCALCPROMPT, which undergoes stan-
dard prompt expansion. The index of the current entry is stored locally in the rst
element of the array psvar, which can be referred to in ZCALCPROMPT as %1v. The
default prompt is %1v> .
A few special commands are available; these are introduced by a colon. For back-
ward compatibility, the colon may be omitted for certain commands. Completion is
available if compinit has been run.
The output precision may be specied within zcalc by special commands familiar
from many calculators.
:norm The default output format. It corresponds to the printf %g specication.
Typically this shows six decimal digits.
:sci digits
Scientic notation, corresponding to the printf %g output format with
the precision given by digits. This produces either xed point or expo-
nential notation depending on the value output.
:fix digits
Fixed point notation, corresponding to the printf %f output format with
the precision given by digits.
:eng digits
Exponential notation, corresponding to the printf %E output format with
the precision given by digits.
:raw Raw output: this is the default form of the output from a math evalua-
tion. This may show more precision than the number actually possesses.
Chapter 26: User Contributions 386
Other special commands:
:!line... Execute line... as a normal shell command line. Note that it is executed
in the context of the function, i.e. with local variables. Space is optional
after :!.
:local arg ...
Declare variables local to the function. Note that certain variables are
used by the function for its own purposes. Other variables may be used,
too, but they will be taken from or put into the global scope.
:function name [ body ]
Dene a mathematical function or (with no body) delete it. :function
may be abbreviated to :func or simply :f. The name may contain the
same characters as a shell function name. The function is dened using
zmathfuncdef, see below.
Note that zcalc takes care of all quoting. Hence for example:
:f cube $1 * $1 * $1
denes a function to cube the sole argument.
[#base] This is not a special command, rather part of normal arithmetic syntax;
however, when this form appears on a line by itself the default output
radix is set to base. Use, for example, [#16] to display hexadecimal
output preceded by an indication of the base, or [##16] just to display
the raw number in the given base. Bases themselves are always specied
in decimal. [#] restores the normal output format. Note that setting
an output base suppresses oating point output; use [#] to return to
normal operation.
See the comments in the function for a few extra tips.
zmathfuncdef [ mathfunc [ body ] ]
A convenient front end to functions -M.
With two arguments, dene a mathematical function named mathfunc which can
be used in any form of arithmetic evaluation. body is a mathematical expression to
implement the function. It may contain references to position parameters $1, $2,
... to refer to mandatory parameters and ${1:-defvalue} ... to refer to optional
parameters. Note that the forms must be strictly adhered to for the function to
calculate the correct number of arguments. The implementation is held in a shell
function named zsh_math_func_mathfunc; usually the user will not need to refer
to the shell function directly. Any existing function of the same name is silently
replaced.
With one argument, remove the mathematical function mathfunc as well as the shell
function implementation.
With no arguments, list all mathfunc functions in a form suitable for restoring the
denition. The functions have not necessarily been dened by zmathfuncdef.
26.10 User Conguration Functions
The zsh/newuser module comes with a function to aid in conguring shell options for new
users. If the module is installed, this function can also be run by hand. It is available even if
the modules default behaviour, namely running the function for a new user logging in without
startup les, is inhibited.
Chapter 26: User Contributions 387
zsh-newuser-install [ -f ]
The function presents the user with various options for customizing their initializa-
tion scripts. Currently only ~/.zshrc is handled. $ZDOTDIR/.zshrc is used instead
if the parameter ZDOTDIR is set; this provides a way for the user to congure a le
without altering an existing .zshrc.
By default the function exits immediately if it nds any of the les .zshenv,
.zprofile, .zshrc, or .zlogin in the appropriate directory. The option -f is
required in order to force the function to continue. Note this may happen even if
.zshrc itself does not exist.
As currently congured, the function will exit immediately if the user has root
privileges; this behaviour cannot be overridden.
Once activated, the functions behaviour is supposed to be self-explanatory. Menus
are present allowing the user to alter the value of options and parameters. Sugges-
tions for improvements are always welcome.
When the script exits, the user is given the opportunity to save the new le or not;
changes are not irreversible until this point. However, the script is careful to re-
strict changes to the le only to a group marked by the lines # Lines configured
by zsh-newuser-install and # End of lines configured by zsh-newuser-
install. In addition, the old version of .zshrc is saved to a le with the sux
.zni appended.
If the function edits an existing .zshrc, it is up to the user to ensure that the
changes made will take eect. For example, if control usually returns early from
the existing .zshrc the lines will not be executed; or a later initialization le may
override options or parameters, and so on. The function itself does not attempt to
detect any such conicts.
26.11 Other Functions
There are a large number of helpful functions in the Functions/Misc directory of the zsh
distribution. Most are very simple and do not require documentation here, but a few are worthy
of special mention.
26.11.1 Descriptions
colors This function initializes several associative arrays to map color names to (and from)
the ANSI standard eight-color terminal codes. These are used by the prompt theme
system (Section 26.5 [Prompt Themes], page 360). You seldom should need to run
colors more than once.
The eight base colors are: black, red, green, yellow, blue, magenta, cyan, and
white. Each of these has codes for foreground and background. In addition there
are seven intensity attributes: bold, faint, standout, underline, blink, reverse,
and conceal. Finally, there are seven codes used to negate attributes: none (reset
all attributes to the defaults), normal (neither bold nor faint), no-standout, no-
underline, no-blink, no-reverse, and no-conceal.
Some terminals do not support all combinations of colors and intensities.
The associative arrays are:
color
colour Map all the color names to their integer codes, and integer codes to the
color names. The eight base names map to the foreground color codes,
as do names prexed with fg-, such as fg-red. Names prexed with
Chapter 26: User Contributions 388
bg-, such as bg-blue, refer to the background codes. The reverse
mapping from code to color yields base name for foreground codes and
the bg- form for backgrounds.
Although it is a misnomer to call them colors, these arrays also map
the other fourteen attributes from names to codes and codes to names.
fg
fg_bold
fg_no_bold
Map the eight basic color names to ANSI terminal escape sequences
that set the corresponding foreground text properties. The fg sequences
change the color without changing the eight intensity attributes.
bg
bg_bold
bg_no_bold
Map the eight basic color names to ANSI terminal escape sequences
that set the corresponding background properties. The bg sequences
change the color without changing the eight intensity attributes.
In addition, the scalar parameters reset_color and bold_color are set to the ANSI
terminal escapes that turn o all attributes and turn on bold intensity, respectively.
fned name
Same as zed -f. This function does not appear in the zsh distribution, but can be
created by linking zed to the name fned in some directory in your fpath.
is-at-least needed [ present ]
Perform a greater-than-or-equal-to comparison of two strings having the format of
a zsh version number; that is, a string of numbers and text with segments separated
by dots or dashes. If the present string is not provided, $ZSH_VERSION is used.
Segments are paired left-to-right in the two strings with leading non-number parts
ignored. If one string has fewer segments than the other, the missing segments are
considered zero.
This is useful in startup les to set options and other state that are not available in
all versions of zsh.
is-at-least 3.1.6-15 && setopt NO_GLOBAL_RCS
is-at-least 3.1.0 && setopt HIST_REDUCE_BLANKS
is-at-least 2.6-17 || print "You cant use is-at-least here."
nslookup [ arg ... ]
This wrapper function for the nslookup command requires the zsh/zpty module
(see Section 22.32 [The zsh/zpty Module], page 302). It behaves exactly like the
standard nslookup except that it provides customizable prompts (including a right-
side prompt) and completion of nslookup commands, host names, etc. (if you use the
function-based completion system). Completion styles may be set with the context
prex :completion:nslookup.
See also the pager, prompt and rprompt styles below.
regexp-replace var regexp replace
Use regular expressions to perform a global search and replace operation on a vari-
able. If the option RE_MATCH_PCRE is not set, POSIX extended regular expressions
are used, else Perl-compatible regular expressions (this requires the shell to be linked
against the pcre library).
Chapter 26: User Contributions 389
var is the name of the variable containing the string to be matched. The variable
will be modied directly by the function. The variables MATCH, MBEGIN, MEND, match,
mbegin, mend should be avoided as these are used by the regular expression code.
regexp is the regular expression to match against the string.
replace is the replacement text. This can contain parameter, command and arith-
metic expressions which will be replaced: in particular, a reference to $MATCH will
be replaced by the text matched by the pattern.
The return status is 0 if at least one match was performed, else 1.
run-help cmd
This function is designed to be invoked by the run-help ZLE widget, in place of
the default alias. See Accessing On-Line Help (Section 26.2 [Utilities], page 339)
for setup instructions.
In the discussion which follows, if cmd is a le system path, it is rst reduced to its
rightmost component (the le name).
Help is rst sought by looking for a le named cmd in the directory named by the
HELPDIR parameter. If no le is found, an assistant function, alias, or command
named run-help-cmd is sought. If found, the assistant is executed with the rest of
the current command line (everything after the command name cmd) as its argu-
ments. When neither le nor assistant is found, the external command man cmd is
run.
An example assistant for the "ssh" command:
run-help-ssh() {
emulate -LR zsh
local -a args
# Delete the "-l username" option
zparseopts -D -E -a args l:
# Delete other options, leaving: host command
args=(${@:#-*})
if [[ ${#args} -lt 2 ]]; then
man ssh
else
run-help $args[2]
fi
}
Several of these assistants are provided in the Functions/Misc directory. These
must be autoloaded, or placed as executable scripts in your search path, in order to
be found and used by run-help.
run-help-git
run-help-svk
run-help-svn
Assistant functions for the git, svk, and svn commands.
tetris Zsh was once accused of not being as complete as Emacs, because it lacked a Tetris
game. This function was written to refute this vicious slander.
This function must be used as a ZLE widget:
autoload -U tetris
zle -N tetris
bindkey keys tetris
To start a game, execute the widget by typing the keys. Whatever command line you
were editing disappears temporarily, and your keymap is also temporarily replaced
Chapter 26: User Contributions 390
by the Tetris control keys. The previous editor state is restored when you quit the
game (by pressing q) or when you lose.
If you quit in the middle of a game, the next invocation of the tetris widget will
continue where you left o. If you lost, it will start a new game.
zargs [ option ... -- ] [ input ... ] [ -- command [ arg ... ] ]
This function has a similar purpose to GNU xargs. Instead of reading lines of
arguments from the standard input, it takes them from the command line. This is
useful because zsh, especially with recursive glob operators, often can construct a
command line for a shell function that is longer than can be accepted by an external
command.
The option list represents options of the zargs command itself, which are the same
as those of xargs. The input list is the collection of strings (often le names) that
become the arguments of the command, analogous to the standard input of xargs.
Finally, the arg list consists of those arguments (usually options) that are passed to
the command each time it runs. The arg list precedes the elements from the input
list in each run. If no command is provided, then no arg list may be provided, and
in that event the default command is print with arguments -r --.
For example, to get a long ls listing of all plain les in the current directory or its
subdirectories:
autoload -U zargs
zargs -- **/*(.) -- ls -l
Note that -- is used both to mark the end of the option list and to mark the end
of the input list, so it must appear twice whenever the input list may be empty. If
there is guaranteed to be at least one input and the rst input does not begin with
a -, then the rst -- may be omitted.
In the event that the string -- is or may be an input, the -e option may be used to
change the end-of-inputs marker. Note that this does not change the end-of-options
marker. For example, to use .. as the marker:
zargs -e.. -- **/*(.) .. ls -l
This is a good choice in that example because no plain le can be named .., but
the best end-marker depends on the circumstances.
The options -i, -I, -l, -L, and -n dier slightly from their usage in xargs. There
are no input lines for zargs to count, so -l and -L count through the input list, and
-n counts the number of arguments passed to each execution of command, including
any arg list. Also, any time -i or -I is used, each input is processed separately as
if by -L 1.
For details of the other zargs options, see man page xargs(1) (but note the dierence
in function between zargs and xargs) or run zargs with the --help option.
zed [ -f ] name
zed -b This function uses the ZLE editor to edit a le or function.
Only one name argument is allowed. If the -f option is given, the name is taken to
be that of a function; if the function is marked for autoloading, zed searches for it
in the fpath and loads it. Note that functions edited this way are installed into the
current shell, but not written back to the autoload le.
Without -f, name is the path name of the le to edit, which need not exist; it is
created on write, if necessary.
While editing, the function sets the main keymap to zed and the vi command
keymap to zed-vicmd. These will be copied from the existing main and vicmd
Chapter 26: User Contributions 391
keymaps if they do not exist the rst time zed is run. They can be used to provide
special key bindings used only in zed.
If it creates the keymap, zed rebinds the return key to insert a line break and
^X^W to accept the edit in the zed keymap, and binds ZZ to accept the edit in the
zed-vicmd keymap.
The bindings alone can be installed by running zed -b. This is suitable for putting
into a startup le. Note that, if rerun, this will overwrite the existing zed and zed-
vicmd keymaps.
Completion is available, and styles may be set with the context prex
:completion:zed.
A zle widget zed-set-file-name is available. This can be called by name from
within zed using \ex zed-set-file-name (note, however, that because of zeds
rebindings you will have to type ^j at the end instead of the return key), or can be
bound to a key in either of the zed or zed-vicmd keymaps after zed -b has been
run. When the widget is called, it prompts for a new name for the le being edited.
When zed exits the le will be written under that name and the original le will be
left alone. The widget has no eect with zed -f.
While zed-set-file-name is running, zed uses the keymap zed-normal-keymap,
which is linked from the main keymap in eect at the time zed initialised its bindings.
(This is to make the return key operate normally.) The result is that if the main
keymap has been changed, the widget wont notice. This is not a concern for most
users.
zcp [ -finqQvwW ] srcpat dest
zln [ -finqQsvwW ] srcpat dest
Same as zmv -C and zmv -L, respectively. These functions do not appear in the zsh
distribution, but can be created by linking zmv to the names zcp and zln in some
directory in your fpath.
zkbd See Keyboard Denition (Section 26.2 [Utilities], page 339).
zmv [ -finqQsvwW ] [ -C | -L | -M | -[pP] program ] [ -o optstring ] srcpat dest
Move (usually, rename) les matching the pattern srcpat to corresponding les hav-
ing names of the form given by dest, where srcpat contains parentheses surrounding
patterns which will be replaced in turn by $1, $2, ... in dest. For example,
zmv (*).lis $1.txt
renames foo.lis to foo.txt, my.old.stuff.lis to my.old.stuff.txt, and
so on.
The pattern is always treated as an EXTENDED_GLOB pattern. Any le whose name
is not changed by the substitution is simply ignored. Any error (a substitution
resulted in an empty string, two substitutions gave the same result, the destination
was an existing regular le and -f was not given) causes the entire function to abort
without doing anything.
Options:
-f Force overwriting of destination les. Not currently passed down to the
mv/cp/ln command due to vagaries of implementations (but you can
use -o-f to do that).
-i Interactive: show each line to be executed and ask the user whether to
execute it. Y or y will execute it, anything else will skip it. Note that
you just need to type one character.
Chapter 26: User Contributions 392
-n No execution: print what would happen, but dont do it.
-q Turn bare glob qualiers o: now assumed by default, so this has no
eect.
-Q Force bare glob qualiers on. Dont turn this on unless you are actually
using glob qualiers in a pattern.
-s Symbolic, passed down to ln; only works with -L.
-v Verbose: print each command as its being executed.
-w Pick out wildcard parts of the pattern, as described above, and implicitly
add parentheses for referring to them.
-W Just like -w, with the addition of turning wildcards in the replacement
pattern into sequential ${1} .. ${N} references.
-C
-L
-M Force cp, ln or mv, respectively, regardless of the name of the function.
-p program
Call program instead of cp, ln or mv. Whatever it does, it should at
least understand the form
program -- oldname newname
where oldname and newname are lenames generated by zmv. program
will be split into words, so might be e.g. the name of an archive tool
plus a copy or rename subcommand.
-P program
As -p program, except that program does not accept a following -- to
indicate the end of options. In this case lenames must already be in a
sane form for the program in question.
-o optstring
The optstring is split into words and passed down verbatim to the cp,
ln or mv command called to perform the work. It should probably begin
with a -.
Further examples:
zmv -v (* *) ${1// /_}
For any le in the current directory with at least one space in the name, replace
every space by an underscore and display the commands executed.
For more complete examples and other implementation details, see the zmv
source le, usually located in one of the directories named in your fpath, or in
Functions/Misc/zmv in the zsh distribution.
zrecompile
See Recompiling Functions (Section 26.2 [Utilities], page 339).
zstyle+ context style value [ + subcontext style value ... ]
This makes dening styles a bit simpler by using a single + as a special token that
allows you to append a context name to the previously used context name. Like
this:
zstyle+ :foo:bar style1 value1 \
+:baz style2 value2 \
+:frob style3 value3
Chapter 26: User Contributions 393
This denes style1 with value1 for the context :foo:bar as usual, but it also
denes style2 with value2 for the context :foo:bar:baz and style3 with value3
for :foo:bar:frob. Any subcontext may be the empty string to re-use the rst
context unchanged.
26.11.2 Styles
insert-tab
The zed function sets this style in context :completion:zed:* to turn o comple-
tion when TAB is typed at the beginning of a line. You may override this by setting
your own value for this context and style.
pager The nslookup function looks up this style in the context :nslookup to determine
the program used to display output that does not t on a single screen.
prompt
rprompt The nslookup function looks up this style in the context :nslookup to set the
prompt and the right-side prompt, respectively. The usual expansions for the PS1
and RPS1 parameters may be used (see Chapter 13 [Prompt Expansion], page 33).
Concept Index 394
Concept Index
$
$0, setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102
$0, using. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105
-
help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
version. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
.
.zwc les, creation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 138
A
acquiring zsh by FTP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
aliases, completion of . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
aliases, dening . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112
aliases, expansion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
aliases, global . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
aliases, listing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112
aliases, removing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137
aliasing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
alternate forms for complex commands . . . . . . . . . . . 13
always blocks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
ambiguous completion. . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
annoying keyboard, sun . . . . . . . . . . . . . . . . . . . . . . . . . . 99
anonymous functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
argument splitting, in typeset etc. . . . . . . . . . . . . . . . 104
arithmetic base . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
arithmetic evaluation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
arithmetic expansion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
arithmetic operators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
array assignment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
array expansion style, rc . . . . . . . . . . . . . . . . . . . . . . . . . 46
array parameters, setting. . . . . . . . . . . . . . . . . . . . . . . . 129
array style, ksh . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104
arrays, behaviour of index zero . . . . . . . . . . . . . . . . . . 104
arrays, ksh style . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104
assignment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
asynchronous jobs, and exiting shell . . . . . . . . . . . . . . 26
author . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
autoloading functions. . . . . . . . . . . . . . . . . . . . . . . . 20, 112
availability of zsh . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
B
background jobs, I/O . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
background jobs, notication. . . . . . . . . . . . . . . . . . . . 100
background jobs, priority of . . . . . . . . . . . . . . . . . . . . . . 99
bases, in arithmetic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
bases, output in C format . . . . . . . . . . . . . . . . . . . . . . . 101
bash, BASH REMATCH variable . . . . . . . . . . . . . . . 103
beep, ambiguous completion. . . . . . . . . . . . . . . . . . . . . . 91
beep, enabling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107
beep, history. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
bg, output in POSIX format . . . . . . . . . . . . . . . . . . . . 100
binding keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 146
binding widgets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 149
bindings, key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 145
brace expansion. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
brace expansion, disabling. . . . . . . . . . . . . . . . . . . . . . . . 93
brace expansion, extending . . . . . . . . . . . . . . . . . . . . . . . 92
break, inside function . . . . . . . . . . . . . . . . . . . . . . . . . . . 102
builtin commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111
builtins, utility. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 304
C
calendar function system. . . . . . . . . . . . . . . . . . . . . . . . 308
calling widgets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 149
capabilities, getting from les . . . . . . . . . . . . . . . . . . . 265
capabilities, setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 265
capabilities, setting on les . . . . . . . . . . . . . . . . . . . . . . 265
case selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
case-insensitive globbing, option . . . . . . . . . . . . . . . . . . 92
case-insensitive regular expression matches, option
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
cd, automatic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
cd, behaving like pushd . . . . . . . . . . . . . . . . . . . . . . . . . . 89
cd, to parameter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
cd, with .. in argument . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
CDPATH, order of checking . . . . . . . . . . . . . . . . . . . . . . 89
character classes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
characters, (Unicode) combining. . . . . . . . . . . . . . . . . 107
characters, multibyte, in expansion and globbing. . 93
clobbering, of les . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
cloning the shell . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 265
colon modiers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
combining characters (Unicode) . . . . . . . . . . . . . . . . . 107
command execution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
command execution, enabling . . . . . . . . . . . . . . . . . . . 102
command hashing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
command not found, handling of . . . . . . . . . . . . . . . . . 20
command substitution. . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
commands, alternate forms for complex. . . . . . . . . . . 13
commands, builtin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111
commands, complex. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
commands, disabling . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115
commands, enabling . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118
commands, simple. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
commands, tracing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103
comments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
comments, in interactive shells . . . . . . . . . . . . . . . . . . . 98
compatibility. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
compatibility, csh . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117
compatibility, ksh . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117
compatibility, sh . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117
compdef, use of by compinit. . . . . . . . . . . . . . . . . . . . . 193
compilation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 138
completion removable sux, highlighting . . . . . . . . 174
completion system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 191
completion system, adding denitions . . . . . . . . . . . 196
completion system, autoloaded functions . . . . . . . . 193
completion system, bindable commands . . . . . . . . . 230
completion system, choosing completers . . . . . . . . . 225
completion system, completers . . . . . . . . . . . . . . . . . . 225
completion system, conguration . . . . . . . . . . . . . . . . 197
completion system, directory structure . . . . . . . . . . 254
completion system, initializing . . . . . . . . . . . . . . . . . . 192
completion system, installing . . . . . . . . . . . . . . . . . . . . 192
Concept Index 395
completion system, styles . . . . . . . . . . . . . . . . . . . . . . . 203
completion system, tags . . . . . . . . . . . . . . . . . . . . . . . . . 199
completion system, utility functions . . . . . . . . . . . . . 232
completion widgets, adding specied matches . . . . 182
completion widgets, condition codes . . . . . . . . . . . . . 187
completion widgets, creating . . . . . . . . . . . . . . . . . . . . 150
completion widgets, examining and setting state in
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 177
completion widgets, example . . . . . . . . . . . . . . . . . . . . 191
completion widgets, modifying special parameters
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 185
completion, ambiguous . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
completion, beep on ambiguous. . . . . . . . . . . . . . . . . . . 91
completion, coloured listings . . . . . . . . . . . . . . . . . . . . 266
completion, controlling . . . . . . . . . . . . . . . . 176, 191, 254
completion, exact matches. . . . . . . . . . . . . . . . . . . . . . . . 91
completion, listing. . . . . . . . . . . . . . . . . . . . . . . . . . . 91, 266
completion, listing choices . . . . . . . . . . . . . . . . . . . . . . . . 90
completion, listing choices, bash style. . . . . . . . . . . . . 90
completion, listing order. . . . . . . . . . . . . . . . . . . . . . . . . . 91
completion, menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90, 91
completion, programmable. . . . . . . . . . . . . 176, 191, 254
completion, scroll listings. . . . . . . . . . . . . . . . . . . . . . . . 266
completion, selecting by cursor . . . . . . . . . . . . . . . . . . 268
completion, utility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 271
completion, widgets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 176
complex commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
conditional expression. . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
conditional expressions . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
continue, inside function . . . . . . . . . . . . . . . . . . . . . . . . 102
continuing jobs automatically . . . . . . . . . . . . . . . . . . . . 99
continuing loops . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114
coprocess . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
correction, spelling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
csh, compatibility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117
csh, history style . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104
csh, loop style . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104
csh, null command style . . . . . . . . . . . . . . . . . . . . . . . . . . 83
csh, null globbing style . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
csh, quoting style . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104
csh, redirections with no command . . . . . . . . . . . . . . 104
D
date string, printing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 276
DEBUG trap, before or after command. . . . . . . . . . 101
dening widgets. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 149
descriptors, le. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
directories, changing . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113
directories, hashing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
directories, maintaining list of recent . . . . . . . . . . . . 343
directories, marking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
directories, named. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
directories, named, dynamic . . . . . . . . . . . . . . . . . . . . . . 57
directories, named, static . . . . . . . . . . . . . . . . . . . . . . . . . 58
directory stack, controlling syntax . . . . . . . . . . . . . . . . 89
directory stack, ignoring duplicates . . . . . . . . . . . . . . . 89
directory stack, printing. . . . . . . . . . . . . . . . . . . . . . . . . 114
directory stack, silencing . . . . . . . . . . . . . . . . . . . . . . . . . 89
disabling brace expansion . . . . . . . . . . . . . . . . . . . . . . . . 93
disabling commands. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115
discarding embedded nulls in $... . . . . . . . . . . . . . . . 106
disowning jobs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
doing nothing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112
doing nothing, successfully . . . . . . . . . . . . . . . . . . . . . . 132
doing nothing, unsuccessfully. . . . . . . . . . . . . . . . . . . . 119
dynamic named directories . . . . . . . . . . . . . . . . . . . . . . . 57
E
echo, BSD compatible. . . . . . . . . . . . . . . . . . . . . . . . . . . 103
editing history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119
editing over slow connection. . . . . . . . . . . . . . . . . . . . . . 80
editing parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 148
editor ksh style . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 145
editor, enabling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
editor, line . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 144
editor, overstrike mode . . . . . . . . . . . . . . . . . . . . . . . . . . 108
editor, single line mode . . . . . . . . . . . . . . . . . . . . . . . . . 108
eight bit characters, printing . . . . . . . . . . . . . . . . . . . . . 99
embedded nulls, in $... . . . . . . . . . . . . . . . . . . . . . . . . . 106
enable globbing qualiers. . . . . . . . . . . . . . . . . . . . . . . . . 92
enable history substitution . . . . . . . . . . . . . . . . . . . . . . . 95
enabling commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118
enabling globbing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
enabling the beep . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107
enabling the editor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
environment, and local parameters . . . . . . . . . . . . . . . 97
EOF, ignoring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
error, option to continue script on . . . . . . . . . . . . . . . 103
errors, handling of . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
escape sequences, terminal, for highlighting. . . . . . 174
evaluating arguments as commands. . . . . . . . . . . . . . 119
evaluation, arithmetic . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
event designators, history . . . . . . . . . . . . . . . . . . . . . . . . 39
executables, hashing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
execution, of commands . . . . . . . . . . . . . . . . . . . . . . . . . . 20
execution, timed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 286
exit status from pipeline . . . . . . . . . . . . . . . . . . . . . . . . 103
exit status, printing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
exit status, trapping . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
exiting loops . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113
exiting shell, and asynchronous jobs . . . . . . . . . . . . . . 26
exiting, checking jobs when. . . . . . . . . . . . . . . . . . . . . . . 99
expanding parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . 112
expansion. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
expansion style, sh . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106
expansion, arithmetic . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
expansion, brace . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
expansion, brace, disabling . . . . . . . . . . . . . . . . . . . . . . . 93
expansion, brace, extending . . . . . . . . . . . . . . . . . . . . . . 92
expansion, lename . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
expansion, history. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
expansion, parameter . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
expansion, prompt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
export, automatic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
exporting, and local parameters . . . . . . . . . . . . . . . . . . 97
expressions, conditional . . . . . . . . . . . . . . . . . . . . . . . . . . 30
extended attributes, xattr, getting from les . . . . . 265
extended attributes, xattr, listing. . . . . . . . . . . . . . . . 265
extended attributes, xattr, removing, deleting . . . 265
extended attributes, xattr, setting on les . . . . . . . 265
F
fg, output in POSIX format . . . . . . . . . . . . . . . . . . . . . 100
eld splitting, sh style. . . . . . . . . . . . . . . . . . . . . . . . . . . 106
eld splitting, sh style, parameter . . . . . . . . . . . . . . . . 47
Concept Index 396
le clobbering, allowing . . . . . . . . . . . . . . . . . . . . . . . . . . 97
le descriptors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
le descriptors, use with parameters . . . . . . . . . . . . . . 18
le descriptors, waiting for . . . . . . . . . . . . . . . . . . . . . . 303
le, history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120
lename expansion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
lename expansion, =. . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
lename generation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
lename generation, bad pattern . . . . . . . . . . . . . . . . . 92
les used. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
les, examining . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 287
les, global startup, inhibiting. . . . . . . . . . . . . . . . . . . . 97
les, listing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 287
les, manipulating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 277
les, marking type of . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
les, shutdown . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
les, startup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
les, transferring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 294
ags, parameter expansion . . . . . . . . . . . . . . . . . . . . . . . 47
ags, shell . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
oating point parameters . . . . . . . . . . . . . . . . . . . . . . . . . 29
oating point, forcing use of . . . . . . . . . . . . . . . . . . . . . . 92
ow control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
for loops . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
forcing use of oating point . . . . . . . . . . . . . . . . . . . . . . 92
FTP. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 294
FTP sites for zsh. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
FTP, functions for using shell as client . . . . . . . . . . 330
FTP, starting a session. . . . . . . . . . . . . . . . . . . . . . . . . . 294
function return, on error . . . . . . . . . . . . . . . . . . . . . . . . 101
function, scope of break and continue. . . . . . . . . . . . 102
functions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
functions, anonymous . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
functions, autoloading . . . . . . . . . . . . . . . . . . . . . . . 20, 112
functions, math, use of . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
functions, mathematical . . . . . . . . . . . . . . . . . . . . . . . . . 280
functions, proling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 301
functions, recompiling. . . . . . . . . . . . . . . . . . . . . . . . . . . 340
functions, removing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137
functions, returning from. . . . . . . . . . . . . . . . . . . . . . . . 129
G
globbing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
globbing modiers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
globbing qualiers, enable . . . . . . . . . . . . . . . . . . . . . . . . 92
globbing style, sh . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
globbing, bad pattern . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
globbing, enabling. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
globbing, extended . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
globbing, no matches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
globbing, null, style, csh. . . . . . . . . . . . . . . . . . . . . . . . . . 92
globbing, of . les . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
globbing, qualiers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
globbing, sorting numerically . . . . . . . . . . . . . . . . . . . . . 94
grammar, shell . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
H
hashing, of commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
hashing, of directories . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
hashing, of executables . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
helples utility. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 339
hexadecimal, output in C format . . . . . . . . . . . . . . . . 101
highlighting, region . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 173
highlighting, special characters . . . . . . . . . . . . . . . . . . 174
history. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
history beeping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
history event designators . . . . . . . . . . . . . . . . . . . . . . . . . 39
history expansion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
history modiers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
history style, csh. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104
history word designators . . . . . . . . . . . . . . . . . . . . . . . . . 39
history, appending to a le . . . . . . . . . . . . . . . . . . . . . . . 95
history, editing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119
history, enable substitution. . . . . . . . . . . . . . . . . . . . . . . 95
history, expiring duplicates . . . . . . . . . . . . . . . . . . . . . . . 95
history, le. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120
history, hook when line is saved . . . . . . . . . . . . . . . . . . 23
history, ignoring all duplicates . . . . . . . . . . . . . . . . . . . . 95
history, ignoring duplicates . . . . . . . . . . . . . . . . . . . . . . . 95
history, ignoring duplicates in search . . . . . . . . . . . . . 95
history, ignoring spaces. . . . . . . . . . . . . . . . . . . . . . . . . . . 95
history, incremental appending to a le . . . . . . . . . . . 96
history, incremental appending to a le with time
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
history, sharing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
history, stack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120
history, timestamping . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
history, verifying substitution. . . . . . . . . . . . . . . . . . . . . 96
hook function utility . . . . . . . . . . . . . . . . . . . . . . . . . . . . 343
I
identiers, non-portable characters in. . . . . . . . . . . . 105
if construct . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
input, tracing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103
integer parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
invocation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
invoking widgets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 149
J
job control, allowing . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100
job control, in subshell . . . . . . . . . . . . . . . . . . . . . . . . . . 100
jobs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
jobs, asynchronous, and exiting shell . . . . . . . . . . . . . . 26
jobs, background priority. . . . . . . . . . . . . . . . . . . . . . . . . 99
jobs, background, I/O. . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
jobs, backgrounding. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113
jobs, continuing automatically. . . . . . . . . . . . . . . . . . . . 99
jobs, disowning. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26, 116
jobs, foregrounding. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120
jobs, HUP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100
jobs, killing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123
jobs, list format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100
jobs, output in subshell . . . . . . . . . . . . . . . . . . . . . . . . . 100
jobs, referring to . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
jobs, resuming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120
jobs, resuming automatically . . . . . . . . . . . . . . . . . . . . . 99
jobs, suspending . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
jobs, waiting for . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137
K
key bindings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 145
keyboard denition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 341
Concept Index 397
keymaps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 145, 146
keys, binding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 146
keys, rebinding. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 146
killing jobs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123
ksh compatibility. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
ksh, argument splitting in typeset . . . . . . . . . . . . . . . 104
ksh, array style . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104
ksh, compatibility. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117
ksh, editor mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 145
ksh, null command style. . . . . . . . . . . . . . . . . . . . . . . . . . 83
ksh, option printing style. . . . . . . . . . . . . . . . . . . . . . . . 104
ksh, redirections with no command. . . . . . . . . . . . . . 106
ksh, single letter options style . . . . . . . . . . . . . . . . . . . 106
L
limits, resource . . . . . . . . . . . . . . . . . . . . . . . . 123, 135, 137
line editor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 144
line number, in evaluated expression. . . . . . . . . . . . . 101
line, reading . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121
links, symbolic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
loading modules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140
logging out, checking jobs when . . . . . . . . . . . . . . . . . . 99
long option. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
loop style, csh . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104
loops, continuing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114
loops, exiting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113
loops, for . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
loops, repeat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
loops, until . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
loops, while . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
M
mail, warning of reading. . . . . . . . . . . . . . . . . . . . . . . . . . 98
mailing lists . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
marking directories. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
marking le types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
mathematical functions . . . . . . . . . . . . . . . . . . . . . . . . . 280
mathematical functions, use of . . . . . . . . . . . . . . . . . . . 29
mode, privileged . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107
modiers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
modiers, precommand. . . . . . . . . . . . . . . . . . . . . . . . . . . 10
modules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 263
modules, example . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 277
modules, loading . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140
modules, writing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 277
multibyte characters, in expansion and globbing . . 93
multios . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
N
named directories, dynamic . . . . . . . . . . . . . . . . . . . . . . 57
named directories, static . . . . . . . . . . . . . . . . . . . . . . . . . 58
notication of background jobs . . . . . . . . . . . . . . . . . . 100
null command style . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
null globbing style, csh . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
nulls, embedded in $... . . . . . . . . . . . . . . . . . . . . . . . . . 106
O
octal, arithmetic expressions . . . . . . . . . . . . . . . . . . . . 103
octal, output in C format . . . . . . . . . . . . . . . . . . . . . . . 101
operator precedence . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
operators, arithmetic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
option printing style, ksh. . . . . . . . . . . . . . . . . . . . . . . . 104
option printing, ksh style. . . . . . . . . . . . . . . . . . . . . . . . 104
options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88
options, aliases . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
options, description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
options, processing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121
options, setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130
options, shell . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
options, single letter . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109
options, single letter, ksh style . . . . . . . . . . . . . . . . . . 106
options, specifying . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88
options, unsetting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137
overstrike mode, of editor . . . . . . . . . . . . . . . . . . . . . . . 108
P
parameter expansion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
parameter expansion ags . . . . . . . . . . . . . . . . . . . . . . . . 47
parameter expansion style, rc. . . . . . . . . . . . . . . . . . . . . 94
parameter modiers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
parameter names, non-portable characters in . . . . 105
parameter, le access via . . . . . . . . . . . . . . . . . . . . . . . . 280
parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
parameters, declaring . . . . . . . . . . . . . . . . . . . . . . . . . . . 132
parameters, editing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 148
parameters, editor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 154
parameters, expanding . . . . . . . . . . . . . . . . . . . . . . . . . . 112
parameters, oating point . . . . . . . . . . . . . . . . . . . . . . . . 29
parameters, for using le descriptors . . . . . . . . . . . . . . 18
parameters, integer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
parameters, listing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129
parameters, marking readonly . . . . . . . . . . . . . . . . . . . 129
parameters, positional . . . . . . . . . . . . . . . . . . . . . . 129, 130
parameters, setting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 132
parameters, setting array. . . . . . . . . . . . . . . . . . . . . . . . 129
parameters, special . . . . . . . . . . . . . . . . . . . . . . . . . 282, 301
parameters, substituting unset. . . . . . . . . . . . . . . . . . . . 94
parameters, unsetting . . . . . . . . . . . . . . . . . . . . . . . . . . . 137
parameters, warning when created globally . . . . . . . 94
parameters, zle. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 154
path search, extended . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
path search, for script argument to shell . . . . . . . . . . 99
PCRE, regexp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
pipeline . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
pipeline, exit status from. . . . . . . . . . . . . . . . . . . . . . . . 103
precedence of glob operators. . . . . . . . . . . . . . . . . . . . . . 61
precedence, operator . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
precommand modiers . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
priority of background jobs . . . . . . . . . . . . . . . . . . . . . . . 99
privileged mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107
process substitution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
prompt expansion. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
prompt, ! expansion. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100
prompt, % expansion . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
prompt, parameter expansion . . . . . . . . . . . . . . . . . . . 101
prompt, save partial lines . . . . . . . . . . . . . . . . . . . . . . . 100
prompt, with CR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100
pushd, making cd behave like . . . . . . . . . . . . . . . . . . . . 89
pushd, to home . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
Concept Index 398
Q
qualiers, globbing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
querying before rm * . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
quoting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
quoting style, csh . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104
quoting style, rc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
R
rc, array expansion style . . . . . . . . . . . . . . . . . . . . . . . . . 46
rc, parameter expansion style. . . . . . . . . . . . . . . . . . . . . 94
rc, quoting style. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
reading a line . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121
rebinding keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 146
rebinding widgets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 149
recent directories, maintaining list of . . . . . . . . . . . . 343
redirection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
redirections with no command, csh . . . . . . . . . . . . . . 104
redirections with no command, ksh. . . . . . . . . . . . . . 106
redirections with no command, sh . . . . . . . . . . . . . . . 106
referring to jobs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
regex . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 285
regexp, bash BASH REMATCH variable . . . . . . . . 103
regexp, PCRE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
region, highlighting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 173
regular expressions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 285
regular expressions, case-insensitive matching, option
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
regular expressions, perl-compatible . . . . . . . . . . . . . 284
removable sux, highlighting in completino . . . . . 174
repeat loops. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
reporter utility. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 342
reserved words . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
resource limits . . . . . . . . . . . . . . . . . . . . . . . . . 123, 135, 137
restricted shell . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7, 107
resuming jobs automatically. . . . . . . . . . . . . . . . . . . . . . 99
return from function, on error . . . . . . . . . . . . . . . . . . . 101
rm *, querying before . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
rm *, waiting before. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
roadmap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
S
select, system call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 303
selection, case . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
selection, user . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
sh compatibility. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
sh, compatibility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117
sh, expansion style . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106
sh, eld splitting style. . . . . . . . . . . . . . . . . . . . . . . . . . . 106
sh, eld splitting style, parameter . . . . . . . . . . . . . . . . 47
sh, globbing style . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
sh, redirections with no command . . . . . . . . . . . . . . . 106
sh, single letter options style . . . . . . . . . . . . . . . . . . . . 106
share history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
shell ags . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
shell grammar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
shell options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
shell, cloning. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 265
shell, suspending . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130
shell, timing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131
shutdown les . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
signals, trapping. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24, 131
simple commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
single command. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107
single letter options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109
single letter options, ksh style . . . . . . . . . . . . . . . . . . . 106
slash, removing trailing. . . . . . . . . . . . . . . . . . . . . . . . . . . 90
slow connection, editing over . . . . . . . . . . . . . . . . . . . . . 80
sockets. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 287
sockets, closing TCP. . . . . . . . . . . . . . . . . . . . . . . . . . . . 293
sockets, inbound TCP. . . . . . . . . . . . . . . . . . . . . . . . . . . 293
sockets, inbound Unix domain. . . . . . . . . . . . . . . . . . . 287
sockets, outbound TCP . . . . . . . . . . . . . . . . . . . . . . . . . 292
sockets, outbound Unix domain . . . . . . . . . . . . . . . . . 287
sockets, TCP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 292
sockets, Unix domain . . . . . . . . . . . . . . . . . . . . . . . . . . . 287
special characters, highlighting . . . . . . . . . . . . . . . . . . 174
spelling correction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
stack, history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120
startup les . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
startup les, global, inhibiting. . . . . . . . . . . . . . . . . . . . 97
startup les, sourcing . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
static named directories . . . . . . . . . . . . . . . . . . . . . . . . . . 58
status, on exit from pipeline. . . . . . . . . . . . . . . . . . . . . 103
styles in zftp functions . . . . . . . . . . . . . . . . . . . . . . . . . . 337
sublist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
subscript ags. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
subscripts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
subshell . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
substitution, command . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
substitution, parameter, ags. . . . . . . . . . . . . . . . . . . . . 47
substitution, process . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
sux, highlighting removable, in completion. . . . . 174
sun keyboard, annoying . . . . . . . . . . . . . . . . . . . . . . . . . . 99
suspending jobs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
suspending the shell . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130
symbolic links . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
T
TCP. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 292
TCP function system . . . . . . . . . . . . . . . . . . . . . . . . . . . 320
TCP, example . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 293
termcap value, printing . . . . . . . . . . . . . . . . . . . . . . . . . 294
terminal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 265
terminal escape sequences for highlighting . . . . . . . 174
terminfo value, printing . . . . . . . . . . . . . . . . . . . . . . . . . 294
timed execution. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 286
timing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
timing the shell . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131
tracing, of commands . . . . . . . . . . . . . . . . . . . . . . . . . . . 103
tracing, of input lines . . . . . . . . . . . . . . . . . . . . . . . . . . . 103
trapping signals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24, 131
traps, asynchronous . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106
traps, DEBUG, before or after command . . . . . . . . 101
traps, on function exit . . . . . . . . . . . . . . . . . . . . . . . . . . 106
traps, POSIX compatibility . . . . . . . . . . . . . . . . . . . . . 106
try blocks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
tty, freezing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 132
U
umask . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136
Unicode combining characters . . . . . . . . . . . . . . . . . . . 107
unset parameters, substituting. . . . . . . . . . . . . . . . . . . . 94
until loops . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
user contributions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 339
Concept Index 399
user selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
users, watching . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125
V
version control utility . . . . . . . . . . . . . . . . . . . . . . . . . . . 347
W
waiting before rm * . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
waiting for jobs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137
watching users . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125
while loops. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
widgets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 154
widgets, binding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 149
widgets, calling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 149
widgets, dening . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 149
widgets, invoking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 149
widgets, rebinding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 149
widgets, standard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 158
widgets, user-dened . . . . . . . . . . . . . . . . . . . . . . . . . . . . 154
windows, curses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 273
word designators, history. . . . . . . . . . . . . . . . . . . . . . . . . 39
writing modules. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 277
Z
zftp function system . . . . . . . . . . . . . . . . . . . . . . . . . . . . 330
zftp function system, automatic reopening. . . . . . . 338
zftp function system, conguration . . . . . . . . . . . . . . 337
zftp function system, remote globbing . . . . . . . . . . . 338
zftp function system, styles. . . . . . . . . . . . . . . . . . . . . . 337
zftp, functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 300
zftp, parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 298
zftp, problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 300
zftp, subcommands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 294
ZLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 144
zle, builtin commands . . . . . . . . . . . . . . . . . . . . . . . . . . . 146
zlogin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
zlogout. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
zprole. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
zrecompile utility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 340
zsh/datetime, function system based on . . . . . . . . . 308
zshenv . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
zshrc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
ztcp, function system based on . . . . . . . . . . . . . . . . . . 320
Variables Index 400
Variables Index
!
! . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
#
# . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
$
$ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
*
* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
-
- . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
?
? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
@
@ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
_ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
0
0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
A
aliases . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 283
all_quotes, compstate. . . . . . . . . . . . . . . . . . . . . . . . . 177
ARGC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
argv . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
ARGV0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
B
BAUD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
BAUD, use of . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 145
BUFFER. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 154
BUFFERLINES. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 154
builtins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 282
C
cdpath. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
CDPATH. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
chpwd_functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
COLUMNS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
COLUMNS, use of . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 145
commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 282
compstate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 177
CONTEXT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 154
context, compstate . . . . . . . . . . . . . . . . . . . . . . . . . . . . 177
context, use of . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 238
CORRECT_IGNORE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
CORRECT_IGNORE_FILE. . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
CPUTYPE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
CURRENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 177
CURSOR. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 155
CUTBUFFER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 155
D
dirstack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 283
DIRSTACKSIZE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
dis_aliases. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 283
dis_builtins. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 282
dis_functions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 282
dis_galiases. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 283
dis_patchars. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 283
dis_reswords. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 282
dis_saliases. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 283
E
EDITOR. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 145
EGID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
ENV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
ENV, use of . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
EPOCHREALTIME. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 276
EPOCHSECONDS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 277
epochtime . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 277
ERRNO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
errnos. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 291
EUID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
exact, compstate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 178
exact_string, compstate . . . . . . . . . . . . . . . . . . . . . . 178
expl, use of . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 238
F
FCEDIT. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
fignore. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
FIGNORE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
fpath . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
FPATH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
fpath, use of . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
funcfiletrace. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 284
funcsourcetrace . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 284
funcstack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 284
functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 282
functrace . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 284
G
galiases . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 283
GID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
H
HELPDIR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 340
histchars . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
Variables Index 401
HISTCHARS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
histchars, use of . . . . . . . . . . . . . . . . . . . . . . . . . . . 15, 38
HISTCMD. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
HISTFILE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
HISTNO. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 155
history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 283
HISTORY_IGNORE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
historywords. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 283
HISTSIZE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
HISTSIZE, use of . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
HOME . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
HOME, use of. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
HOST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
I
IFS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
IFS, use of . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47, 56, 127
ignored, compstate . . . . . . . . . . . . . . . . . . . . . . . . . . . . 178
incarg, use of . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 366
insert, compstate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 178
insert_positions, compstate. . . . . . . . . . . . . . . . . . 179
IPREFIX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 177
ISUFFIX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 177
J
jobdirs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 283
jobstates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 283
jobtexts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 283
K
KEYBOARD_HACK. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
KEYMAP. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 155
keymaps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 301
KEYS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 155
KEYTIMEOUT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
killring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 155
L
LANG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
langinfo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 279
last_prompt, compstate. . . . . . . . . . . . . . . . . . . . . . . . 179
LASTABORTEDSEARCH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 155
LASTSEARCH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 155
LASTWIDGET . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 155
LBUFFER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 155
LC_ALL. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
LC_COLLATE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
LC_CTYPE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
LC_MESSAGES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
LC_NUMERIC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
LC_TIME. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
line, use of . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 238
LINENO. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
LINES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
LINES, use of . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 145
list, compstate. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 179
list_lines, compstate. . . . . . . . . . . . . . . . . . . . . . . . . 179
list_max, compstate . . . . . . . . . . . . . . . . . . . . . . . . . . . 180
LISTMAX. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
LOGCHECK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
LOGNAME. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
M
MACHTYPE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
MAIL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
MAILCHECK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
mailpath . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
MAILPATH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
manpath. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
MANPATH. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
mapfile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 280
MARK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 155
match . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
MATCH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
mbegin. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
MBEGIN. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
mend . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
MEND . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
MENUSELECT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 268
module_path . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
MODULE_PATH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
modules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 283
N
nameddirs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 284
nmatches, compstate . . . . . . . . . . . . . . . . . . . . . . . . . . . 180
NULLCMD. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
NULLCMD, ignoring. . . . . . . . . . . . . . . . . . . . . . . . . 104, 106
NULLCMD, use of . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
NUMERIC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 155
O
old_insert, compstate. . . . . . . . . . . . . . . . . . . . . . . . . 180
old_list, compstate . . . . . . . . . . . . . . . . . . . . . . . . . . . 180
OLDPWD. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
opt_args, use of . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 238
OPTARG. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
OPTARG, use of . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122
OPTIND. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
OPTIND, use of . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122
options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 282
OSTYPE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
P
parameter, compstate . . . . . . . . . . . . . . . . . . . . . . . . . . 180
parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 283
patchars . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 283
path . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
PATH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
path, use of. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
pattern_insert, compstate . . . . . . . . . . . . . . . . . . . . 180
pattern_match, compstate . . . . . . . . . . . . . . . . . . . . . 180
PENDING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 156
PERIOD. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
periodic_functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
pipestatus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
POSTDISPLAY. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 156
POSTEDIT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
PPID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
PREBUFFER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 156
precmd_functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Variables Index 402
PREDISPLAY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 156
preexec_functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
PREFIX. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 177
prompt. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
PROMPT. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
PROMPT_EOL_MARK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
PROMPT2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
PROMPT3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
PROMPT4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
PS1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
PS2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
PS3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
PS4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
psvar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
PSVAR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
psvar, use of . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
PWD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
Q
QIPREFIX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 177
QISUFFIX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 177
quote, compstate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 180
quoting, compstate . . . . . . . . . . . . . . . . . . . . . . . . . . . . 181
R
RANDOM. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
RBUFFER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 156
READNULLCMD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
READNULLCMD, ignoring . . . . . . . . . . . . . . . . . . . . 104, 106
READNULLCMD, use of. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
redirect, compstate . . . . . . . . . . . . . . . . . . . . . . . . . . . 181
REGION_ACTIVE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 156
region_highlight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 156
reply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
REPLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
reply, use of . . . . . . . . . . . . . . . . 67, 127, 258, 259, 304
REPLY, use of . . . . . . . . . . . . . . . . . . . . . . . . . . . 11, 67, 127
REPORTTIME . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
restore, compstate . . . . . . . . . . . . . . . . . . . . . . . . . . . . 181
reswords . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 282
RPROMPT. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
RPROMPT2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
RPS1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
RPS2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
S
saliases . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 283
SAVEHIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
SECONDS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
SHLVL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
signals. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
SPROMPT. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
status. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
STTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
SUFFIX. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 177
sysparams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 291
T
tcp_expect_lines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 327
tcp_filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 327
TCP_HANDLER_ACTIVE. . . . . . . . . . . . . . . . . . . . . . . . . . . . 328
TCP_LINE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 328
TCP_LINE_FD. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 328
tcp_lines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 328
TCP_LOG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 328
tcp_no_spam_list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 328
tcp_on_read. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 329
TCP_OUTPUT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 328
TCP_PROMPT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 328
TCP_READ_DEBUG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 328
TCP_SECONDS_START . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 328
TCP_SESS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 329
TCP_SILENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 329
tcp_spam_list. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 329
TCP_TALK_ESCAPE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 329
TCP_TIMEOUT. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 329
TERM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
termcap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 294
terminfo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 294
TERMINFO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
TIMEFMT. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
TMOUT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
TMPPREFIX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
to_end, compstate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 181
TRY_BLOCK_ERROR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
TTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
TTYIDLE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
U
UID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
unambiguous, compstate. . . . . . . . . . . . . . . . . . . . . . . . 181
unambiguous_cursor, compstate. . . . . . . . . . . . . . . . 181
unambiguous_positions, compstate . . . . . . . . . . . . 181
UNDO_CHANGE_NO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 157
userdirs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 284
usergroups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 284
USERNAME . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
V
vared, compstate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 181
VENDOR. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
VISUAL. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 145
W
watch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
WATCH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
watch, use of . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125
WATCHFMT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
WIDGET. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 157
WIDGETFUNC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 157
widgets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 301
WIDGETSTYLE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 157
WORDCHARS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
words. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 181
Z
ZBEEP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
zcurses_attrs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 276
ZCURSES_COLOR_PAIRS. . . . . . . . . . . . . . . . . . . . . . . . . . . 276
zcurses_colors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 276
ZCURSES_COLORS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 276
Variables Index 403
zcurses_keycodes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 276
zcurses_windows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 276
ZDOTDIR. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
ZDOTDIR, use of . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
ZFTP_ACCOUNT. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 298
ZFTP_CODE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 298
ZFTP_COUNT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 300
ZFTP_FILE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 300
ZFTP_HOST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 298
ZFTP_IP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 298
ZFTP_PORT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 298
ZFTP_PREFS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 299
ZFTP_PWD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 298
ZFTP_REPLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 299
ZFTP_SESSION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 299
ZFTP_SIZE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 300
ZFTP_SYSTEM. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 298
ZFTP_TMOUT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 298
ZFTP_TRANSFER. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 300
ZFTP_TYPE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 298
ZFTP_USER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 298
ZFTP_VERBOSE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 299
ZLE_LINE_ABORTED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
ZLE_REMOVE_SUFFIX_CHARS . . . . . . . . . . . . . . . . . . . . . . . 87
ZLE_RPROMPT_INDENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88
ZLE_SPACE_SUFFIX_CHARS . . . . . . . . . . . . . . . . . . . . . . . . 87
ZLE_STATE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 157
ZLS_COLORS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 266
ZLS_COLOURS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 266
zsh_eval_context . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
ZSH_EVAL_CONTEXT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
ZSH_NAME . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
ZSH_PATCHLEVEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
zsh_scheduled_events . . . . . . . . . . . . . . . . . . . . . . . . . 286
ZSH_SUBSHELL <S>. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
ZSH_VERSION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
zshaddhistory_functions . . . . . . . . . . . . . . . . . . . . . . . 23
zshexit_functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Options Index 404
Options Index
A
ALIASES. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
ALL_EXPORT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
ALLEXPORT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
ALWAYS_LAST_PROMPT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
ALWAYS_TO_END. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
ALWAYSLASTPROMPT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
ALWAYSTOEND . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
APPEND_HISTORY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
APPENDHISTORY. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
AUTO_CD. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
AUTO_CONTINUE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
AUTO_LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
AUTO_MENU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
AUTO_NAME_DIRS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
AUTO_PARAM_KEYS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
AUTO_PARAM_SLASH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
AUTO_PUSHD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
AUTO_PUSHD, use of. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
AUTO_REMOVE_SLASH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
AUTO_RESUME . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
AUTOCD. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
AUTOCONTINUE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
AUTOLIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
AUTOMENU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
AUTONAMEDIRS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
AUTOPARAMKEYS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
AUTOPARAMSLASH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
AUTOPUSHD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
AUTOREMOVESLASH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
AUTORESUME . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
B
BAD_PATTERN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
BADPATTERN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
BANG_HIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
BANGHIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
BARE_GLOB_QUAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
BARE_GLOB_QUAL, use of . . . . . . . . . . . . . . . . . . . . . . . . . 65
BAREGLOBQUAL. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
BASH_AUTO_LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
BASH_REMATCH. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103
BASHAUTOLIST. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
BASHREMATCH. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103
BEEP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107
BG_NICE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
BGNICE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
BRACE_CCL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
BRACE_CCL, use of . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
BRACE_EXPAND. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
BRACECCL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
BRACEEXPAND. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
BSD_ECHO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103
BSD_ECHO, use of . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117
BSDECHO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103
C
C_BASES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
C_BASES, use of . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
C_PRECEDENCES. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
CASE_GLOB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
CASE_MATCH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
CASEGLOB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
CASEMATCH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
CBASES. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
CDABLE_VARS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
CDABLE_VARS, use of . . . . . . . . . . . . . . . . . . . . . . . . . . . 127
CDABLEVARS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
CHASE_DOTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
CHASE_LINKS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
CHASE_LINKS, use of . . . . . . . . . . . . . . . . . . . . . . . . . . . 127
CHASEDOTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
CHASELINKS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
CHECK_JOBS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
CHECKJOBS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
CLOBBER. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
COMBINING_CHARS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107
COMBININGCHARS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107
COMPLETE_ALIASES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
COMPLETE_IN_WORD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
COMPLETEALIASES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
COMPLETEINWORD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
CONTINUE_ON_ERROR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103
CONTINUEONERROR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103
CORRECT. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
CORRECT_ALL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
CORRECTALL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
CPRECEDENCES. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
CSH_JUNKIE_HISTORY. . . . . . . . . . . . . . . . . . . . . . . . . . . . 104
CSH_JUNKIE_HISTORY, use of . . . . . . . . . . . . . . . . . . . . 38
CSH_JUNKIE_LOOPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104
CSH_JUNKIE_QUOTES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104
CSH_NULL_GLOB. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
CSH_NULLCMD. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104
CSH_NULLCMD, use of. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
CSHJUNKIEHISTORY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104
CSHJUNKIELOOPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104
CSHJUNKIEQUOTES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104
CSHNULLCMD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104
CSHNULLGLOB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
D
DEBUG_BEFORE_CMD <D> . . . . . . . . . . . . . . . . . . . . . . . . . . 101
DEBUGBEFORECMD <D> . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
DOT_GLOB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
DOTGLOB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
DVORAK. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
E
EMACS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
EQUALS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
ERR_EXIT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
ERR_RETURN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
ERREXIT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
ERRRETURN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
EVAL_LINENO. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
EVALLINENO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
Options Index 405
EXEC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102
EXTENDED_GLOB. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
EXTENDED_GLOB, use of . . . . . . . . . . . . . . . . . . . . . . . . . . 59
EXTENDED_HISTORY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
EXTENDEDGLOB. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
EXTENDEDHISTORY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
F
FLOW_CONTROL. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
FLOWCONTROL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
FORCE_FLOAT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
FORCEFLOAT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
FUNCTION_ARGZERO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102
FUNCTIONARGZERO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102
G
GLOB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
GLOB, use of. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
GLOB_ASSIGN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
GLOB_COMPLETE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
GLOB_DOTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
GLOB_DOTS, setting in pattern . . . . . . . . . . . . . . . . . 68
GLOB_DOTS, use of . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
GLOB_SUBST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
GLOB_SUBST, toggle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
GLOBAL_EXPORT. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
GLOBAL_RCS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
GLOBAL_RCS, use of. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
GLOBALEXPORT. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
GLOBALRCS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
GLOBASSIGN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
GLOBCOMPLETE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
GLOBDOTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
GLOBSUBST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
H
HASH_ALL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
HASH_CMDS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
HASH_DIRS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
HASH_EXECUTABLES_ONLY . . . . . . . . . . . . . . . . . . . . . . . . . 98
HASH_LIST_ALL. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
HASHALL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
HASHCMDS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
HASHDIRS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
HASHEXECUTABLESONLY. . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
HASHLISTALL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
HIST_ALLOW_CLOBBER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
HIST_APPEND. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
HIST_BEEP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
HIST_EXPAND. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
HIST_EXPIRE_DUPS_FIRST . . . . . . . . . . . . . . . . . . . . . . . . 95
HIST_FCNTL_LOCK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
HIST_FIND_NO_DUPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
HIST_IGNORE_ALL_DUPS. . . . . . . . . . . . . . . . . . . . . . . . . . . 95
HIST_IGNORE_DUPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
HIST_IGNORE_SPACE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
HIST_LEX_WORDS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
HIST_NO_FUNCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
HIST_NO_STORE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
HIST_REDUCE_BLANKS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
HIST_SAVE_BY_COPY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
HIST_SAVE_NO_DUPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
HIST_SUBST_PATTERN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
HIST_VERIFY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
HISTALLOWCLOBBER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
HISTAPPEND . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
HISTBEEP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
HISTEXPAND . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
HISTEXPIREDUPSFIRST. . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
HISTFCNTLLOCK. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
HISTFINDNODUPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
HISTIGNOREALLDUPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
HISTIGNOREDUPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
HISTIGNORESPACE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
HISTLEXWORDS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
HISTNOFUNCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
HISTNOSTORE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
HISTREDUCEBLANKS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
HISTSAVEBYCOPY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
HISTSAVENODUPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
HISTSUBSTPATTERN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
HISTVERIFY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
HUP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100
HUP, use of. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
I
IGNORE_BRACES. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
IGNORE_CLOSE_BRACES. . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
IGNORE_EOF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
IGNORE_EOF, use of. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119
IGNOREBRACES. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
IGNORECLOSEBRACES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
IGNOREEOF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
INC_APPEND_HISTORY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
INC_APPEND_HISTORY_TIME . . . . . . . . . . . . . . . . . . . . . . . 96
INCAPPENDHISTORY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
INCAPPENDHISTORYTIME. . . . . . . . . . . . . . . . . . . . . . . . . . . 96
INTERACTIVE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107
INTERACTIVE, use of . . . . . . . . . . . . . . . . . . . . . . . . . . . 107
INTERACTIVE_COMMENTS. . . . . . . . . . . . . . . . . . . . . . . . . . . 98
INTERACTIVE_COMMENTS, use of . . . . . . . . . . . . . . . . . . 15
INTERACTIVECOMMENTS. . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
K
KSH_ARRAYS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104
KSH_ARRAYS, use of . . . . . . . . . . . . . . . . . . . . . . . . . 71, 129
KSH_AUTOLOAD. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104
KSH_AUTOLOAD, use of . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
KSH_GLOB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
KSH_GLOB, use of . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
KSH_OPTION_PRINT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104
KSH_TYPESET. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104
KSH_ZERO_SUBSCRIPT. . . . . . . . . . . . . . . . . . . . . . . . . . . . 104
KSHARRAYS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104
KSHAUTOLOAD. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104
KSHGLOB. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
KSHOPTIONPRINT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104
KSHTYPESET . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104
KSHZEROSUBSCRIPT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104
L
LIST_AMBIGUOUS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
LIST_BEEP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
Options Index 406
LIST_PACKED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
LIST_ROWS_FIRST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
LIST_TYPES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
LISTAMBIGUOUS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
LISTBEEP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
LISTPACKED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
LISTROWSFIRST. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
LISTTYPES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
LOCAL_LOOPS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102
LOCAL_OPTIONS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102
LOCAL_PATTERNS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102
LOCAL_TRAPS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102
LOCALLOOPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102
LOCALOPTIONS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102
LOCALPATTERNS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102
LOCALTRAPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102
LOG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
LOGIN. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107
LOGIN, use of. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
LONG_LIST_JOBS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100
LONGLISTJOBS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100
M
MAGIC_EQUAL_SUBST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
MAGICEQUALSUBST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
MAIL_WARN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
MAIL_WARNING. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
MAILWARN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
MAILWARNING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
MARK_DIRS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
MARK_DIRS, setting in pattern . . . . . . . . . . . . . . . . . 68
MARKDIRS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
MENU_COMPLETE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
MENU_COMPLETE, use of . . . . . . . . . . . . . . . . . . . . . . . . . 169
MENUCOMPLETE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
MONITOR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100
MONITOR, use of . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
MULTI_FUNC_DEF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102
MULTIBYTE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
MULTIFUNCDEF. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102
MULTIOS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103
MULTIOS, use of . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
N
NO_ALIASES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
NO_ALL_EXPORT. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
NO_ALWAYS_LAST_PROMPT . . . . . . . . . . . . . . . . . . . . . . . . . 90
NO_ALWAYS_TO_END . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
NO_APPEND_HISTORY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
NO_AUTO_CD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
NO_AUTO_CONTINUE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
NO_AUTO_LIST. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
NO_AUTO_MENU. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
NO_AUTO_NAME_DIRS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
NO_AUTO_PARAM_KEYS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
NO_AUTO_PARAM_SLASH. . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
NO_AUTO_PUSHD. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
NO_AUTO_REMOVE_SLASH. . . . . . . . . . . . . . . . . . . . . . . . . . . 90
NO_AUTO_RESUME . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
NO_BAD_PATTERN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
NO_BANG_HIST. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
NO_BARE_GLOB_QUAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
NO_BASH_AUTO_LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
NO_BASH_REMATCH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103
NO_BEEP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107
NO_BG_NICE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
NO_BRACE_CCL. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
NO_BRACE_EXPAND . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
NO_BSD_ECHO. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103
NO_C_BASES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
NO_C_PRECEDENCES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
NO_CASE_GLOB. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
NO_CASE_MATCH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92, 285
NO_CDABLE_VARS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
NO_CHASE_DOTS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
NO_CHASE_LINKS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
NO_CHECK_JOBS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
NO_CLOBBER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
NO_COMBINING_CHARS. . . . . . . . . . . . . . . . . . . . . . . . . . . . 107
NO_COMPLETE_ALIASES. . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
NO_COMPLETE_IN_WORD. . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
NO_CONTINUE_ON_ERROR . . . . . . . . . . . . . . . . . . . . . . . . . 103
NO_CORRECT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
NO_CORRECT_ALL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
NO_CSH_JUNKIE_HISTORY . . . . . . . . . . . . . . . . . . . . . . . . 104
NO_CSH_JUNKIE_LOOPS. . . . . . . . . . . . . . . . . . . . . . . . . . . 104
NO_CSH_JUNKIE_QUOTES . . . . . . . . . . . . . . . . . . . . . . . . . 104
NO_CSH_NULL_GLOB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
NO_CSH_NULLCMD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104
NO_DEBUG_BEFORE_CMD <D> . . . . . . . . . . . . . . . . . . . . . . 101
NO_DOT_GLOB. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
NO_DVORAK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
NO_EMACS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
NO_EQUALS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
NO_ERR_EXIT. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
NO_ERR_RETURN. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
NO_EVAL_LINENO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
NO_EXEC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102
NO_EXTENDED_GLOB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
NO_EXTENDED_HISTORY. . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
NO_FLOW_CONTROL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
NO_FORCE_FLOAT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
NO_FUNCTION_ARGZERO. . . . . . . . . . . . . . . . . . . . . . . . . . . 102
NO_GLOB. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
NO_GLOB_ASSIGN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
NO_GLOB_COMPLETE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
NO_GLOB_DOTS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
NO_GLOB_SUBST. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
NO_GLOBAL_EXPORT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
NO_GLOBAL_RCS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
NO_GLOBAL_RCS, use of . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
NO_HASH_ALL. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
NO_HASH_CMDS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
NO_HASH_DIRS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
NO_HASH_EXECUTABLES_ONLY . . . . . . . . . . . . . . . . . . . . . . 98
NO_HASH_LIST_ALL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
NO_HIST_ALLOW_CLOBBER . . . . . . . . . . . . . . . . . . . . . . . . . 95
NO_HIST_APPEND . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
NO_HIST_BEEP. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
NO_HIST_EXPAND . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
NO_HIST_EXPIRE_DUPS_FIRST . . . . . . . . . . . . . . . . . . . . . 95
NO_HIST_FCNTL_LOCK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
NO_HIST_FIND_NO_DUPS. . . . . . . . . . . . . . . . . . . . . . . . . . . 95
NO_HIST_IGNORE_ALL_DUPS . . . . . . . . . . . . . . . . . . . . . . . 95
NO_HIST_IGNORE_DUPS. . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
NO_HIST_IGNORE_SPACE. . . . . . . . . . . . . . . . . . . . . . . . . . . 95
NO_HIST_LEX_WORDS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
Options Index 407
NO_HIST_NO_FUNCTIONS. . . . . . . . . . . . . . . . . . . . . . . . . . . 96
NO_HIST_NO_STORE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
NO_HIST_REDUCE_BLANKS . . . . . . . . . . . . . . . . . . . . . . . . . 96
NO_HIST_SAVE_BY_COPY. . . . . . . . . . . . . . . . . . . . . . . . . . . 96
NO_HIST_SAVE_NO_DUPS. . . . . . . . . . . . . . . . . . . . . . . . . . . 96
NO_HIST_SUBST_PATTERN . . . . . . . . . . . . . . . . . . . . . . . . . 93
NO_HIST_VERIFY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
NO_HUP. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100
NO_IGNORE_BRACES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
NO_IGNORE_CLOSE_BRACES . . . . . . . . . . . . . . . . . . . . . . . . 93
NO_IGNORE_EOF. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
NO_INC_APPEND_HISTORY . . . . . . . . . . . . . . . . . . . . . . . . . 96
NO_INC_APPEND_HISTORY_TIME. . . . . . . . . . . . . . . . . . . . 96
NO_INTERACTIVE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107
NO_INTERACTIVE_COMMENTS . . . . . . . . . . . . . . . . . . . . . . . 98
NO_KSH_ARRAYS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104
NO_KSH_AUTOLOAD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104
NO_KSH_GLOB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
NO_KSH_OPTION_PRINT. . . . . . . . . . . . . . . . . . . . . . . . . . . 104
NO_KSH_TYPESET . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104
NO_KSH_ZERO_SUBSCRIPT . . . . . . . . . . . . . . . . . . . . . . . . 104
NO_LIST_AMBIGUOUS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
NO_LIST_BEEP. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
NO_LIST_PACKED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
NO_LIST_ROWS_FIRST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
NO_LIST_TYPES. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
NO_LOCAL_LOOPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102
NO_LOCAL_OPTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102
NO_LOCAL_PATTERNS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102
NO_LOCAL_TRAPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102
NO_LOG. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
NO_LOGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107
NO_LONG_LIST_JOBS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100
NO_MAGIC_EQUAL_SUBST. . . . . . . . . . . . . . . . . . . . . . . . . . . 93
NO_MAIL_WARN. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
NO_MAIL_WARNING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
NO_MARK_DIRS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
NO_MENU_COMPLETE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
NO_MONITOR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100
NO_MULTI_FUNC_DEF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102
NO_MULTIBYTE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
NO_MULTIOS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103
NO_NOMATCH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
NO_NOTIFY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100
NO_NULL_GLOB. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
NO_NUMERIC_GLOB_SORT. . . . . . . . . . . . . . . . . . . . . . . . . . . 94
NO_OCTAL_ZEROES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103
NO_ONE_CMD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
NO_OVERSTRIKE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
NO_PATH_DIRS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
NO_PATH_SCRIPT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
NO_PHYSICAL. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
NO_PIPE_FAIL. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103
NO_POSIX_ALIASES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105
NO_POSIX_ARGZERO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105
NO_POSIX_BUILTINS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105
NO_POSIX_CD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
NO_POSIX_IDENTIFIERS . . . . . . . . . . . . . . . . . . . . . . . . . 105
NO_POSIX_JOBS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100
NO_POSIX_STRINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106
NO_POSIX_TRAPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106
NO_PRINT_EIGHT_BIT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
NO_PRINT_EXIT_VALUE. . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
NO_PRIVILEGED. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107
NO_PROMPT_BANG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100
NO_PROMPT_CR. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100
NO_PROMPT_PERCENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
NO_PROMPT_SP. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100
NO_PROMPT_SUBST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
NO_PROMPT_VARS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
NO_PUSHD_IGNORE_DUPS. . . . . . . . . . . . . . . . . . . . . . . . . . . 89
NO_PUSHD_MINUS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
NO_PUSHD_SILENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
NO_PUSHD_TO_HOME . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
NO_RC_EXPAND_PARAM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
NO_RC_QUOTES. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
NO_RCS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
NO_RCS, use of . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
NO_REC_EXACT. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
NO_REMATCH_PCRE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
NO_RESTRICTED. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107
NO_RM_STAR_SILENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
NO_RM_STAR_WAIT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
NO_SH_FILE_EXPANSION . . . . . . . . . . . . . . . . . . . . . . . . . 106
NO_SH_GLOB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
NO_SH_NULLCMD. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106
NO_SH_OPTION_LETTERS . . . . . . . . . . . . . . . . . . . . . . . . . 106
NO_SH_WORD_SPLIT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106
NO_SHARE_HISTORY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
NO_SHIN_STDIN. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107
NO_SHORT_LOOPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
NO_SINGLE_COMMAND . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107
NO_SINGLE_LINE_ZLE. . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
NO_SOURCE_TRACE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103
NO_STDIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
NO_SUN_KEYBOARD_HACK. . . . . . . . . . . . . . . . . . . . . . . . . . . 99
NO_TRACK_ALL. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
NO_TRANSIENT_RPROMPT . . . . . . . . . . . . . . . . . . . . . . . . . 101
NO_TRAPS_ASYNC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106
NO_TYPESET_SILENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103
NO_UNSET . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
NO_VERBOSE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103
NO_VI. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
NO_WARN_CREATE_GLOBAL . . . . . . . . . . . . . . . . . . . . . . . . . 94
NO_XTRACE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103
NO_ZLE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
NOALIASES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
NOALLEXPORT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
NOALWAYSLASTPROMPT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
NOALWAYSTOEND. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
NOAPPENDHISTORY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
NOAUTOCD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
NOAUTOCONTINUE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
NOAUTOLIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
NOAUTOMENU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
NOAUTONAMEDIRS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
NOAUTOPARAMKEYS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
NOAUTOPARAMSLASH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
NOAUTOPUSHD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
NOAUTOREMOVESLASH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
NOAUTORESUME. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
NOBADPATTERN. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
NOBANGHIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
NOBAREGLOBQUAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
NOBASHAUTOLIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
NOBASHREMATCH. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103
NOBEEP. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107
NOBGNICE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
NOBRACECCL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
NOBRACEEXPAND. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
Options Index 408
NOBSDECHO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103
NOCASEGLOB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
NOCASEMATCH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
NOCBASES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
NOCDABLEVARS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
NOCHASEDOTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
NOCHASELINKS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
NOCHECKJOBS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
NOCLOBBER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
NOCOMBININGCHARS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107
NOCOMPLETEALIASES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
NOCOMPLETEINWORD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
NOCONTINUEONERROR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103
NOCORRECT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
NOCORRECTALL. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
NOCPRECEDENCES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
NOCSHJUNKIEHISTORY. . . . . . . . . . . . . . . . . . . . . . . . . . . . 104
NOCSHJUNKIELOOPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104
NOCSHJUNKIEQUOTES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104
NOCSHNULLCMD. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104
NOCSHNULLGLOB. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
NODEBUGBEFORECMD <D> . . . . . . . . . . . . . . . . . . . . . . . . . . 101
NODOTGLOB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
NODVORAK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
NOEMACS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
NOEQUALS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
NOERREXIT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
NOERRRETURN. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
NOEVALLINENO. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
NOEXEC. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102
NOEXTENDEDGLOB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
NOEXTENDEDHISTORY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
NOFLOWCONTROL. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
NOFORCEFLOAT. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
NOFUNCTIONARGZERO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102
NOGLOB. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
NOGLOBALEXPORT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
NOGLOBALRCS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
NOGLOBASSIGN. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
NOGLOBCOMPLETE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
NOGLOBDOTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
NOGLOBSUBST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
NOHASHALL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
NOHASHCMDS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
NOHASHDIRS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
NOHASHEXECUTABLESONLY . . . . . . . . . . . . . . . . . . . . . . . . . 98
NOHASHLISTALL. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
NOHISTALLOWCLOBBER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
NOHISTAPPEND. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
NOHISTBEEP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
NOHISTEXPAND. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
NOHISTEXPIREDUPSFIRST . . . . . . . . . . . . . . . . . . . . . . . . . 95
NOHISTFCNTLLOCK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
NOHISTFINDNODUPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
NOHISTIGNOREALLDUPS. . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
NOHISTIGNOREDUPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
NOHISTIGNORESPACE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
NOHISTLEXWORDS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
NOHISTNOFUNCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
NOHISTNOSTORE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
NOHISTREDUCEBLANKS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
NOHISTSAVEBYCOPY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
NOHISTSAVENODUPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
NOHISTSUBSTPATTERN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
NOHISTVERIFY. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
NOHUP. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100
NOIGNOREBRACES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
NOIGNORECLOSEBRACES. . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
NOIGNOREEOF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
NOINCAPPENDHISTORY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
NOINCAPPENDHISTORYTIME . . . . . . . . . . . . . . . . . . . . . . . . 96
NOINTERACTIVE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107
NOINTERACTIVECOMMENTS . . . . . . . . . . . . . . . . . . . . . . . . . 98
NOKSHARRAYS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104
NOKSHAUTOLOAD. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104
NOKSHGLOB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
NOKSHOPTIONPRINT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104
NOKSHTYPESET. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104
NOKSHZEROSUBSCRIPT. . . . . . . . . . . . . . . . . . . . . . . . . . . . 104
NOLISTAMBIGUOUS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
NOLISTBEEP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
NOLISTPACKED. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
NOLISTROWSFIRST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
NOLISTTYPES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
NOLOCALLOOPS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102
NOLOCALOPTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102
NOLOCALPATTERNS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102
NOLOCALTRAPS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102
NOLOG. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
NOLOGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107
NOLONGLISTJOBS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100
NOMAGICEQUALSUBST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
NOMAILWARN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
NOMAILWARNING. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
NOMARKDIRS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
NOMATCH. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
NOMATCH, use of . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
NOMENUCOMPLETE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
NOMONITOR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100
NOMULTIBYTE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
NOMULTIFUNCDEF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102
NOMULTIOS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103
NONOMATCH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
NONOTIFY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100
NONULLGLOB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
NONUMERICGLOBSORT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
NOOCTALZEROES. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103
NOONECMD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
NOOVERSTRIKE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
NOPATHDIRS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
NOPATHSCRIPT. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
NOPHYSICAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
NOPIPEFAIL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103
NOPOSIXALIASES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105
NOPOSIXARGZERO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105
NOPOSIXBUILTINS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105
NOPOSIXCD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
NOPOSIXIDENTIFIERS. . . . . . . . . . . . . . . . . . . . . . . . . . . . 105
NOPOSIXJOBS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100
NOPOSIXSTRINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106
NOPOSIXTRAPS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106
NOPRINTEIGHTBIT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
NOPRINTEXITVALUE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
NOPRIVILEGED. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107
NOPROMPTBANG. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100
NOPROMPTCR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100
NOPROMPTPERCENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
NOPROMPTSP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100
NOPROMPTSUBST. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
NOPROMPTVARS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
Options Index 409
NOPUSHDIGNOREDUPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
NOPUSHDMINUS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
NOPUSHDSILENT. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
NOPUSHDTOHOME. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
NORCEXPANDPARAM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
NORCQUOTES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
NORCS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
NORECEXACT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
NOREMATCHPCRE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
NORESTRICTED. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107
NORMSTARSILENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
NORMSTARWAIT. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
NOSHAREHISTORY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
NOSHFILEEXPANSION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106
NOSHGLOB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
NOSHINSTDIN. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107
NOSHNULLCMD. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106
NOSHOPTIONLETTERS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106
NOSHORTLOOPS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
NOSHWORDSPLIT. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106
NOSINGLECOMMAND . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107
NOSINGLELINEZLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
NOSOURCETRACE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103
NOSTDIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
NOSUNKEYBOARDHACK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
NOTIFY. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100
NOTIFY, use of . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
NOTRACKALL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
NOTRANSIENTRPROMPT. . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
NOTRAPSASYNC. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106
NOTYPESETSILENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103
NOUNSET. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
NOVERBOSE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103
NOVI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
NOWARNCREATEGLOBAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
NOXTRACE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103
NOZLE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
NULL_GLOB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
NULL_GLOB, setting in pattern . . . . . . . . . . . . . . . . . 68
NULL_GLOB, use of . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
NULLGLOB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
NUMERIC_GLOB_SORT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
NUMERIC_GLOB_SORT, setting in pattern . . . . . . . . 68
NUMERICGLOBSORT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
O
OCTAL_ZEROES. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103
OCTAL_ZEROES, use of . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
OCTALZEROES. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103
ONE_CMD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
ONECMD. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
OVERSTRIKE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
P
PATH_DIRS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
PATH_SCRIPT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
PATHDIRS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
PATHSCRIPT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
PHYSICAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
PIPE_FAIL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103
PIPEFAIL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103
POSIX_ALIASES. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105
POSIX_ARGZERO. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105
POSIX_BUILTINS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105
POSIX_CD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
POSIX_IDENTIFIERS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105
POSIX_JOBS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100
POSIX_STRINGS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106
POSIX_TRAPS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106
POSIXALIASES. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105
POSIXARGZERO. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105
POSIXBUILTINS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105
POSIXCD. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
POSIXIDENTIFIERS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105
POSIXJOBS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100
POSIXSTRINGS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106
POSIXTRAPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106
PRINT_EIGHT_BIT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
PRINT_EXIT_VALUE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
PRINTEIGHTBIT. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
PRINTEXITVALUE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
PRIVILEGED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107
PROMPT_BANG. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100
PROMPT_BANG, use of. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
PROMPT_CR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100
PROMPT_PERCENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
PROMPT_PERCENT, use of . . . . . . . . . . . . . . . . . . . . . . . . . 33
PROMPT_SP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100
PROMPT_SUBST. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
PROMPT_SUBST, use of . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
PROMPT_VARS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
PROMPTBANG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100
PROMPTCR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100
PROMPTPERCENT. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
PROMPTSP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100
PROMPTSUBST. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
PROMPTVARS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
PUSHD_IGNORE_DUPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
PUSHD_MINUS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
PUSHD_MINUS, use of . . . . . . . . . . . . . . . . . . . 57, 125, 127
PUSHD_SILENT. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
PUSHD_SILENT, use of . . . . . . . . . . . . . . . . . . . . . . . . . . 127
PUSHD_TO_HOME. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
PUSHD_TO_HOME, use of . . . . . . . . . . . . . . . . . . . . . . . . . 127
PUSHDIGNOREDUPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
PUSHDMINUS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
PUSHDSILENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
PUSHDTOHOME . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
R
RC_EXPAND_PARAM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
RC_EXPAND_PARAM, toggle. . . . . . . . . . . . . . . . . . . . . . . . 46
RC_QUOTES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
RC_QUOTES, use of . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
RCEXPANDPARAM. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
RCQUOTES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
RCS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
RCS, use of . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
REC_EXACT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
RECEXACT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
REMATCH_PCRE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94, 285
REMATCHPCRE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
RESTRICTED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7, 107
RM_STAR_SILENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
RM_STAR_WAIT. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
RMSTARSILENT. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
RMSTARWAIT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
Options Index 410
S
SH_FILE_EXPANSION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106
SH_GLOB. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
SH_NULLCMD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106
SH_NULLCMD, use of. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
SH_OPTION_LETTERS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106
SH_WORD_SPLIT. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106
SH_WORD_SPLIT, toggle . . . . . . . . . . . . . . . . . . . . . . . . . . 47
SH_WORD_SPLIT, use of . . . . . . . . . . . . . . . . . . . . . . . . . . 50
SHARE_HISTORY. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
SHAREHISTORY. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
SHFILEEXPANSION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106
SHGLOB. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
SHIN_STDIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107
SHINSTDIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107
SHNULLCMD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106
SHOPTIONLETTERS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106
SHORT_LOOPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
SHORTLOOPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
SHWORDSPLIT. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106
SINGLE_COMMAND . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107
SINGLE_LINE_ZLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
SINGLE_LINE_ZLE, use of. . . . . . . . . . . . . . . . . . . . . . . 145
SINGLECOMMAND. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107
SINGLELINEZLE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
SOURCE_TRACE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103
SOURCETRACE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103
STDIN. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
SUN_KEYBOARD_HACK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
SUNKEYBOARDHACK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
T
TRACK_ALL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
TRACKALL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
TRANSIENT_RPROMPT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
TRANSIENTRPROMPT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
TRAPS_ASYNC. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106
TRAPSASYNC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106
TYPESET_SILENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103
TYPESETSILENT. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103
U
UNSET . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
V
VERBOSE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103
VI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
W
WARN_CREATE_GLOBAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
WARNCREATEGLOBAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
X
XTRACE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103
Z
ZLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
ZLE, use of. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 144
Functions Index 411
Functions Index
-
- . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111
:
: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112
[
[[ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
_all_labels. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 233
_all_matches. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 225
_alternative. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 233
_approximate. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 226
_arguments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 233
_bash_completions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 230
_cache_invalid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 242
_call_function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 242
_call_program. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 242
_cdr . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 343
_combination. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 242
_complete . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 226
_complete_debug (^X?). . . . . . . . . . . . . . . . . . . . . . . . . 231
_complete_help (^Xh) . . . . . . . . . . . . . . . . . . . . . . . . . . 232
_complete_help_generic . . . . . . . . . . . . . . . . . . . . . . . 232
_complete_tag (^Xt) . . . . . . . . . . . . . . . . . . . . . . . . . . . 232
_correct . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 227
_correct_filename (^XC) . . . . . . . . . . . . . . . . . . . . . . 230
_correct_word (^Xc) . . . . . . . . . . . . . . . . . . . . . . . . . . . 230
_describe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 243
_description. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 243
_dispatch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 244
_expand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 227
_expand_alias. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 228
_expand_alias (^Xa) . . . . . . . . . . . . . . . . . . . . . . . . . . . 230
_expand_word (^Xe) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 230
_extensions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 228
_files. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 244
_generic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 231
_gnu_generic. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 244
_guard. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 244
_history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 228
_history_complete_word (\e/). . . . . . . . . . . . . . . . . 231
_ignored . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 228
_list. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 228
_match. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 228
_menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 228
_message . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 245
_most_recent_file (^Xm) . . . . . . . . . . . . . . . . . . . . . . 231
_multi_parts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 245
_next_label. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 246
_next_tags (^Xn) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 231
_normal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 246
_oldlist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 229
_options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 246
_options_set. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 246
_options_unset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 246
_parameters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 247
_path_files. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 247
_pick_variant. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 247
_prefix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 229
_read_comp (^X^R) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 231
_regex_arguments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 248
_regex_words [ -t term ] . . . . . . . . . . . . . . . . . . . . . . 249
_requested . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 250
_retrieve_cache . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 251
_sep_parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 251
_sequence . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 251
_setup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 251
_store_cache. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 251
_tags. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 252
_user_expand. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 229
_values . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 252
_wanted . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 253
A
add-zsh-hook. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 343
age . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 316
alias. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112
alias, use of . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
always. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
autoload . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112
autoload, use of . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
B
bashcompinit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 193
bg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113
bg, use of . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
bindkey . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 146
bindkey, use of . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 145
break. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113
builtin. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10, 113
bye . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113
C
calendar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 312
calendar_add. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 314
calendar_edit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 315
calendar_lockfiles. . . . . . . . . . . . . . . . . . . . . . . . . . . . 318
calendar_parse . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 315
calendar_read. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 318
calendar_scandate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 318
calendar_show. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 319
calendar_showdate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 316
calendar_sort. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 316
cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 265
case . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
catch. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 378
cd . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113
cdr . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 343
chdir. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114
chgrp. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 277
Functions Index 412
chown. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 277
chpwd . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
chpwd_recent_add . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 343
chpwd_recent_dirs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 343
chpwd_recent_filehandler . . . . . . . . . . . . . . . . . . . . . 343
clone. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 265
colors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 387
command. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10, 114
command_not_found_handler . . . . . . . . . . . . . . . . . . . . . 20
compadd . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 182
comparguments. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 271
compaudit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 193
compctl . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 255
compdef . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 196
compdescribe. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 271
compfiles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 272
compgroups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 272
compinit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 192
compinstall. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 192
compquote . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 272
compset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 185
comptags . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 272
comptry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 272
compvalues . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 272
continue . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114
coproc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
D
declare . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114
dirs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114
disable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115
disable, use of . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
disown. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116
disown, use of . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
E
echo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116
echotc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 294
echoti. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 294
emulate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117
enable. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118
eval . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119
example . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 277
exec . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
exit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119
export. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119
F
false. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119
fc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119
fc, use of . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
fg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120
fg, use of . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
float. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121
float, use of . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
fned . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 388
for . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
foreach. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
function, use of . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121
functions, hook. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
functions, use of . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
G
getcap. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 265
getln. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121
getopts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121
H
hash . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122
history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122
hook functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
I
if . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
integer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122
integer, use of . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
is-at-least. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 388
J
jobs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122
K
kill . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123
L
let . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123
let, use of. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
limit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123
ln . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 278
local. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125
log . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125
logout. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125
M
mkdir. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 278
mv . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 278
N
nocorrect . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
noglob. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
nslookup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 388
P
pcre-match . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 285
pcre_compile. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 284
pcre_match . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 285
pcre_study . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 284
periodic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
pick-web-browser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 383
popd . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125
precmd. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
preexec. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
print. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125
printf. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126
Functions Index 413
pushd. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127
pushln. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127
pwd . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127
R
r . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127
read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127
readonly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129
regex-match. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 286
regexp-replace . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 388
rehash. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129
repeat. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
reporter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 342
return. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129
return, use of . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
rm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 279
rmdir. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 279
run-help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 389
run-help, use of . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 340
run-help-git. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 389
run-help-svk. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 389
run-help-svn. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 389
S
sched. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 286
select. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129
set, use of. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
setcap. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 265
setopt. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130
shift. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130
source. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130
stat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 287
strftime . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 276
suspend . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130
sync . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 279
syserror . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 289
sysread . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 289
T
tcp_alias . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 323
tcp_aliases. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 330
tcp_by_fd . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 330
tcp_by_name. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 330
tcp_close . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 321
tcp_command. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 323
tcp_expect . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 323
tcp_fd_handler . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 327
tcp_log . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 323
TCP_LOG_SESS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 328
tcp_on_alias. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 326
tcp_on_awol. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 326
tcp_on_close. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 326
tcp_on_open. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 326
tcp_on_rename. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 326
tcp_on_spam. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 326
tcp_on_unalias . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 327
tcp_open . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 320
tcp_output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 327
tcp_proxy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 324
tcp_read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 321
tcp_rename . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 323
tcp_send . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 322
tcp_sess . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 323
tcp_spam . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 324
tcp_talk . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 325
tcp_wait . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 325
test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130
throw. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 378
time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
times. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131
trap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131
trap, use of. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
TRAPDEBUG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
TRAPERR. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
TRAPEXIT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
TRAPZERR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
true . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 132
ttyctl. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 132
type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 132
typeset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 132
typeset, use of . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
U
ulimit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 135
umask. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136
unalias . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137
unfunction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137
unfunction, use of. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
unhash. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137
unlimit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137
unset. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137
unsetopt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137
until . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
V
vared. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 148
vcs_info . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 355
vcs_info_hookadd . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 355
vcs_info_hookdel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 355
vcs_info_lastmsg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 355
vcs_info_printsys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 355
vcs_info_setsys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 355
W
wait . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137
whence. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 138
where. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 138
which. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 138
while . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Z
zargs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 390
zcalc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 384
zcompile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 138
zcompile, use of . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
zcp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 391
zcurses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 273
zdelattr . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 265
zed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 390
zfanon. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 332
Functions Index 414
zfautocheck. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 336
zfcd . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 332
zfcd_match . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 336
zfcget. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 333
zfclose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 334
zfcput. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 334
zfdir. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 332
zffcache . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 337
zfgcp. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 334
zfget. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 333
zfget_match. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 336
zfgoto. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 335
zfhere. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 332
zfinit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 336
zfls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 333
zfmark. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 335
zfopen. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 331
zformat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 305
zfparams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 331
zfpcp. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 334
zfput. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 334
zfrglob . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 336
zfrtime . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 336
zfsession . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 335
zfstat. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 333
zftp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 294
zftp_chpwd, specification . . . . . . . . . . . . . . . . . . . . 300
zftp_chpwd, supplied version . . . . . . . . . . . . . . . . . 336
zftp_progress, specification. . . . . . . . . . . . . . . . . 300
zftp_progress, supplied version. . . . . . . . . . . . . . 337
zftransfer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 335
zftype. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 333
zfuget. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 333
zfuput. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 334
zgetattr . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 265
zkbd . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 341
zle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 149
zlistattr . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 265
zln . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 391
zmathfuncdef. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 386
zmodload . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140
zmv . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 391
zparseopts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 306
zprof. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 301
zpty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 302
zrecompile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 340
zregexparse. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 306
zselect . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 303
zsetattr . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 265
zsh-mime-handler . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 379
zsh-mime-setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 379
zshaddhistory. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
zshexit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
zsocket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 287
zstat. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 287
zstyle. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 304
zstyle+ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 392
ztcp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 292
Editor Functions Index 415
Editor Functions Index
A
accept-and-hold . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 169
accept-and-infer-next-history . . . . . . . . . . . . . . . 169
accept-and-menu-complete . . . . . . . . . . . . . . . . . . . . . 168
accept-line. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 169
accept-line-and-down-history . . . . . . . . . . . . . . . . 169
argument-base. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 168
auto-suffix-remove. . . . . . . . . . . . . . . . . . . . . . . . . . . . 169
auto-suffix-retain. . . . . . . . . . . . . . . . . . . . . . . . . . . . 169
B
backward-char. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 158
backward-delete-char . . . . . . . . . . . . . . . . . . . . . . . . . 164
backward-delete-word . . . . . . . . . . . . . . . . . . . . . . . . . 164
backward-kill-line. . . . . . . . . . . . . . . . . . . . . . . . . . . . 164
backward-kill-word. . . . . . . . . . . . . . . . . . . . . . . . . . . . 164
backward-kill-word-match . . . . . . . . . . . . . . . . . . . . . 362
backward-word. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 158
backward-word-match. . . . . . . . . . . . . . . . . . . . . . . . . . . 362
beep . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 169
beginning-of-buffer-or-history . . . . . . . . . . . . . . 160
beginning-of-history . . . . . . . . . . . . . . . . . . . . . . . . . 160
beginning-of-line . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 159
beginning-of-line-hist . . . . . . . . . . . . . . . . . . . . . . . 160
C
capitalize-word . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 165
capitalize-word-match . . . . . . . . . . . . . . . . . . . . . . . . 362
clear-screen. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 170
complete-word. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 168
copy-earlier-word . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 364
copy-prev-shell-word . . . . . . . . . . . . . . . . . . . . . . . . . 165
copy-prev-word . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 165
copy-region-as-kill. . . . . . . . . . . . . . . . . . . . . . . . . . . 165
cycle-completion-positions. . . . . . . . . . . . . . . . . . . 365
D
delete-char. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 165
delete-char-or-list. . . . . . . . . . . . . . . . . . . . . . . . . . . 168
delete-to-char . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 277
delete-whole-word-match . . . . . . . . . . . . . . . . . . . . . . 365
delete-word. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 165
describe-key-briefly . . . . . . . . . . . . . . . . . . . . . . . . . 170
digit-argument . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 168
down-case-word . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 165
down-case-word-match . . . . . . . . . . . . . . . . . . . . . . . . . 362
down-history. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 160
down-line-or-beginning-search . . . . . . . . . . . . . . . 365
down-line-or-history . . . . . . . . . . . . . . . . . . . . . . . . . 160
down-line-or-search. . . . . . . . . . . . . . . . . . . . . . . . . . . 160
E
edit-command-line . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 365
emacs-backward-word. . . . . . . . . . . . . . . . . . . . . . . . . . . 158
emacs-forward-word. . . . . . . . . . . . . . . . . . . . . . . . . . . . 159
end-of-buffer-or-history . . . . . . . . . . . . . . . . . . . . . 160
end-of-history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 160
end-of-line. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 159
end-of-line-hist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 160
end-of-list. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 169
exchange-point-and-mark . . . . . . . . . . . . . . . . . . . . . . 170
execute-last-named-cmd . . . . . . . . . . . . . . . . . . . . . . . 170
execute-named-cmd . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 170
expand-absolute-path . . . . . . . . . . . . . . . . . . . . . . . . . 365
expand-cmd-path . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 168
expand-history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 168
expand-or-complete. . . . . . . . . . . . . . . . . . . . . . . . . . . . 168
expand-or-complete-prefix. . . . . . . . . . . . . . . . . . . . 168
expand-word. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 169
F
forward-char. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 159
forward-word. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 159
forward-word-match. . . . . . . . . . . . . . . . . . . . . . . . . . . . 362
G
get-line . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 170
gosmacs-transpose-chars . . . . . . . . . . . . . . . . . . . . . . 165
H
history-beginning-search-backward. . . . . . . . . . . 160
history-beginning-search-backward-end . . . . . . 365
history-beginning-search-forward. . . . . . . . . . . . 164
history-beginning-search-forward-end . . . . . . . 365
history-beginning-search-menu . . . . . . . . . . . . . . . 366
history-incremental-pattern-search-backward
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 162
history-incremental-pattern-search-forward
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 162
history-incremental-search-backward . . . . . . . . 161
history-incremental-search-forward . . . . . . . . . 162
history-pattern-search . . . . . . . . . . . . . . . . . . . . . . . 366
history-pattern-search-backward. . . . . . . . . . . . . 366
history-pattern-search-forward . . . . . . . . . . . . . . 366
history-search-backward . . . . . . . . . . . . . . . . . . . . . . 162
history-search-forward . . . . . . . . . . . . . . . . . . . . . . . 163
I
incarg. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 366
incremental-complete-word. . . . . . . . . . . . . . . . . . . . 366
infer-next-history. . . . . . . . . . . . . . . . . . . . . . . . . . . . 163
insert-composed-char . . . . . . . . . . . . . . . . . . . . . . . . . 367
insert-files. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 370
insert-last-word . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 163
insert-unicode-char. . . . . . . . . . . . . . . . . . . . . . . . . . . 370
K
kill-buffer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166
kill-line . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166
kill-region. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166
kill-whole-line . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166
Editor Functions Index 416
kill-word . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 165
kill-word-match . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 362
L
list-choices. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 169
list-expand. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 169
M
magic-space. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 169
match-word-context. . . . . . . . . . . . . . . . . . . . . . . . . . . . 362
match-words-by-style . . . . . . . . . . . . . . . . . . . . . . . . . 362
menu-complete. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 169
menu-expand-or-complete . . . . . . . . . . . . . . . . . . . . . . 169
menu-select. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 268
modify-current-argument . . . . . . . . . . . . . . . . . . . . . . 375
N
narrow-to-region . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 371
narrow-to-region-invisible. . . . . . . . . . . . . . . . . . . 371
neg-argument. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 168
O
overwrite-mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166
P
pound-insert. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 170
predict-off. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 371
predict-on . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 371
push-input . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 170
push-line . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 171
push-line-or-edit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 171
Q
quote-line . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166
quote-region. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166
quoted-insert. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166
R
read-command. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 171
read-from-minibuffer . . . . . . . . . . . . . . . . . . . . . . . . . 372
recursive-edit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 171
redisplay . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 172
redo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 173
replace-argument . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 372
replace-argument-edit . . . . . . . . . . . . . . . . . . . . . . . . 372
replace-pattern . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 373
replace-string . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 373
replace-string-again . . . . . . . . . . . . . . . . . . . . . . . . . 373
reset-prompt. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 172
reverse-menu-complete . . . . . . . . . . . . . . . . . . . . . . . . 169
run-help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 172
S
select-word-style . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 362
self-insert. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167
self-insert-unmeta. . . . . . . . . . . . . . . . . . . . . . . . . . . . 167
send-break . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 172
send-invisible . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 374
set-local-history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 164
set-mark-command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 172
smart-insert-last-word . . . . . . . . . . . . . . . . . . . . . . . 374
spell-word . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 172
split-shell-arguments . . . . . . . . . . . . . . . . . . . . . . . . 375
split-undo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 172
T
transpose-chars . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167
transpose-lines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 374
transpose-words . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167
transpose-words-match . . . . . . . . . . . . . . . . . . . . . . . . 362
U
undefined-key. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 173
undo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 173
universal-argument. . . . . . . . . . . . . . . . . . . . . . . . . . . . 168
up-case-word. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167
up-case-word-match. . . . . . . . . . . . . . . . . . . . . . . . . . . . 362
up-history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 164
up-line-or-beginning-search . . . . . . . . . . . . . . . . . 365
up-line-or-history. . . . . . . . . . . . . . . . . . . . . . . . . . . . 164
up-line-or-search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 164
V
vi-add-eol . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 164
vi-add-next. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 164
vi-backward-blank-word . . . . . . . . . . . . . . . . . . . . . . . 158
vi-backward-char . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 158
vi-backward-delete-char . . . . . . . . . . . . . . . . . . . . . . 164
vi-backward-kill-word . . . . . . . . . . . . . . . . . . . . . . . . 165
vi-backward-word . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 158
vi-beginning-of-line . . . . . . . . . . . . . . . . . . . . . . . . . 159
vi-caps-lock-panic. . . . . . . . . . . . . . . . . . . . . . . . . . . . 170
vi-change . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 165
vi-change-eol. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 165
vi-change-whole-line . . . . . . . . . . . . . . . . . . . . . . . . . 165
vi-cmd-mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 170
vi-delete . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 165
vi-delete-char . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 165
vi-digit-or-beginning-of-line . . . . . . . . . . . . . . . 173
vi-down-line-or-history . . . . . . . . . . . . . . . . . . . . . . 160
vi-end-of-line . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 159
vi-fetch-history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 160
vi-find-next-char . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 159
vi-find-next-char-skip . . . . . . . . . . . . . . . . . . . . . . . 159
vi-find-prev-char . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 159
vi-find-prev-char-skip . . . . . . . . . . . . . . . . . . . . . . . 159
vi-first-non-blank. . . . . . . . . . . . . . . . . . . . . . . . . . . . 159
vi-forward-blank-word . . . . . . . . . . . . . . . . . . . . . . . . 159
vi-forward-blank-word-end. . . . . . . . . . . . . . . . . . . . 159
vi-forward-char . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 159
vi-forward-word . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 159
vi-forward-word-end. . . . . . . . . . . . . . . . . . . . . . . . . . . 159
vi-goto-column . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 159
vi-goto-mark. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 160
vi-goto-mark-line . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 160
vi-history-search-backward. . . . . . . . . . . . . . . . . . . 162
Editor Functions Index 417
vi-history-search-forward. . . . . . . . . . . . . . . . . . . . 163
vi-indent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 165
vi-insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 165
vi-insert-bol. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 165
vi-join . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166
vi-kill-eol. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166
vi-kill-line. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166
vi-match-bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166
vi-open-line-above. . . . . . . . . . . . . . . . . . . . . . . . . . . . 166
vi-open-line-below. . . . . . . . . . . . . . . . . . . . . . . . . . . . 166
vi-oper-swap-case . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166
vi-pound-insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 170
vi-put-after. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166
vi-put-before. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166
vi-quoted-insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166
vi-repeat-change . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167
vi-repeat-find . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 160
vi-repeat-search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 164
vi-replace . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167
vi-replace-chars . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167
vi-rev-repeat-find. . . . . . . . . . . . . . . . . . . . . . . . . . . . 160
vi-rev-repeat-search . . . . . . . . . . . . . . . . . . . . . . . . . 164
vi-set-buffer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 172
vi-set-mark. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 172
vi-substitute. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167
vi-swap-case. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167
vi-undo-change . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 173
vi-unindent. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167
vi-up-line-or-history . . . . . . . . . . . . . . . . . . . . . . . . 164
vi-yank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167
vi-yank-eol. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167
vi-yank-whole-line. . . . . . . . . . . . . . . . . . . . . . . . . . . . 167
W
what-cursor-position . . . . . . . . . . . . . . . . . . . . . . . . . 173
where-is . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 173
which-command. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 173, 375
Y
yank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167
yank-pop . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167
Z
zap-to-char. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 277
zcalc-auto-insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 375
zle-history-line-set . . . . . . . . . . . . . . . . . . . . . . . . . 158
zle-isearch-exit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 157
zle-isearch-update. . . . . . . . . . . . . . . . . . . . . . . . . . . . 157
zle-keymap-select . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 158
zle-line-finish . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 158
zle-line-init. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 158
Style and Tag Index 418
Style and Tag Index
-
-array-value-, completion context . . . . . . . . . . . 195
-assign-parameter-, completion context. . . . . . 195
-brace-parameter-, completion context. . . . . . . 195
-command-, completion context . . . . . . . . . . . . . . . . 195
-condition-, completion context. . . . . . . . . . . . . . 195
-default-, completion context . . . . . . . . . . . . . . . . 195
-equal-, completion context . . . . . . . . . . . . . . . . . . 195
-first-, completion context . . . . . . . . . . . . . . . . . . 195
-math-, completion context . . . . . . . . . . . . . . . . . . . 195
-parameter-, completion context. . . . . . . . . . . . . . 195
-redirect-, completion context. . . . . . . . . . . . . . . 195
-subscript-, completion context. . . . . . . . . . . . . . 195
-tilde-, completion context . . . . . . . . . . . . . . . . . . 195
-value-, completion context . . . . . . . . . . . . . . . . . . 195
A
accept-exact, completion style. . . . . . . . . . . . . . . 203
accept-exact-dirs, completion style . . . . . . . . . 203
accounts, completion tag. . . . . . . . . . . . . . . . . . . . . . 199
actionformats. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 349
add-space, completion style . . . . . . . . . . . . . . . . . . 203
all-expansions, completion tag. . . . . . . . . . . . . . . 199
all-files, completion tag. . . . . . . . . . . . . . . . . . . . . 199
ambiguous, completion style . . . . . . . . . . . . . . . . . . 203
arguments, completion tag. . . . . . . . . . . . . . . . . . . . . 199
arrays, completion tag . . . . . . . . . . . . . . . . . . . . . . . . 199
assign-list, completion style . . . . . . . . . . . . . . . . 204
association-keys, completion tag . . . . . . . . . . . . 199
auto-description, completion style . . . . . . . . . . 204
avoid-completer, completion style . . . . . . . . . . . 204
B
bookmarks, completion tag. . . . . . . . . . . . . . . . . . . . . 199
branchformat. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 349
break-keys, widget style. . . . . . . . . . . . . . . . . . . . . . 376
builtins, completion tag. . . . . . . . . . . . . . . . . . . . . . 199
C
cache-path, completion style . . . . . . . . . . . . . . . . . 204
cache-policy, completion style. . . . . . . . . . . . . . . 204
calendar-file. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 317
call-command, completion style. . . . . . . . . . . . . . . 204
characters, completion tag . . . . . . . . . . . . . . . . . . . 199
check-for-changes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 350
check-for-staged-changes . . . . . . . . . . . . . . . . . . . . . 350
chpwd, zftp style. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 338
colormapids, completion tag . . . . . . . . . . . . . . . . . . 199
colors, completion tag . . . . . . . . . . . . . . . . . . . . . . . . 200
command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 351
command, completion style. . . . . . . . . . . . . . . . . . . . . 204
command-path, completion style. . . . . . . . . . . . . . . 205
commands, completion style . . . . . . . . . . . . . . . . . . . 205
commands, completion tag. . . . . . . . . . . . . . . . . . . . . . 200
complete, completion style . . . . . . . . . . . . . . . . . . . 205
complete-options, completion style . . . . . . . . . . 205
completer, completion style . . . . . . . . . . . . . 205, 376
condition, completion style . . . . . . . . . . . . . . . . . . 205
contexts, completion tag. . . . . . . . . . . . . . . . . . . . . . 200
corrections, completion tag . . . . . . . . . . . . . . . . . . 200
current-shell, MIME style. . . . . . . . . . . . . . . . . . . . . 380
cursor, completion style. . . . . . . . . . . . . . . . . . . . . . 377
cursors, completion tag. . . . . . . . . . . . . . . . . . . . . . . 200
D
date-format. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 317
debug. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 352
default, completion tag. . . . . . . . . . . . . . . . . . . . . . . 200
delimiters, completion style . . . . . . . . . . . . . . . . . 206
descriptions, completion tag . . . . . . . . . . . . . . . . . 200
devices, completion tag. . . . . . . . . . . . . . . . . . . . . . . 200
directories, completion tag . . . . . . . . . . . . . . . . . . 200
directory-stack, completion tag. . . . . . . . . . . . . . 200
disable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 350
disable-patterns . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 350
disabled, completion style . . . . . . . . . . . . . . . . . . . 206
disown, MIME style. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 380
displays, completion tag. . . . . . . . . . . . . . . . . . . . . . 200
domains, completion style. . . . . . . . . . . . . . . . . . . . . 206
domains, completion tag. . . . . . . . . . . . . . . . . . . . . . . 200
done-file . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 318
E
enable. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 350
environ, completion style. . . . . . . . . . . . . . . . . . . . . 206
execute-as-is, MIME style. . . . . . . . . . . . . . . . . . . . . 381
execute-never, MIME style. . . . . . . . . . . . . . . . . . . . . 381
expand, completion style. . . . . . . . . . . . . . . . . . . . . . 206
expansions, completion tag . . . . . . . . . . . . . . . . . . . 200
extensions, completion tag . . . . . . . . . . . . . . . . . . . 200
extra-verbose, completion style. . . . . . . . . . . . . . 211
F
fake, completion style . . . . . . . . . . . . . . . . . . . . . . . . 206
fake-always, completion style . . . . . . . . . . . . . . . . 206
fake-files, completion style . . . . . . . . . . . . . . . . . 207
fake-parameters, completion style . . . . . . . . . . . 207
file-descriptors, completion tag . . . . . . . . . . . . 200
file-list, completion style . . . . . . . . . . . . . . . . . . 207
file-path, MIME style . . . . . . . . . . . . . . . . . . . . . . . . . 381
file-patterns, completion style. . . . . . . . . . . . . . 207
file-sort, completion style . . . . . . . . . . . . . . . . . . 208
files, completion tag . . . . . . . . . . . . . . . . . . . . . . . . . 200
filter, completion style. . . . . . . . . . . . . . . . . . . . . . 208
find-file-in-path, MIME style . . . . . . . . . . . . . . . . 381
flags, MIME style. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 381
fonts, completion tag . . . . . . . . . . . . . . . . . . . . . . . . . 200
force-list, completion style . . . . . . . . . . . . . . . . . 208
format, completion style. . . . . . . . . . . . . . . . . . . . . . 209
formats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 349
fstypes, completion tag. . . . . . . . . . . . . . . . . . . . . . . 200
functions, completion tag. . . . . . . . . . . . . . . . . . . . . 200
Style and Tag Index 419
G
get-bookmarks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 351
get-mq. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 351
get-revision. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 351
glob, completion style . . . . . . . . . . . . . . . . . . . . . . . . 209
global, completion style. . . . . . . . . . . . . . . . . . . . . . 209
globbed-files, completion tag . . . . . . . . . . . . . . . . 200
group-name, completion style . . . . . . . . . . . . . . . . . 209
group-order, completion style . . . . . . . . . . . . . . . . 210
groups, completion style. . . . . . . . . . . . . . . . . . . . . . 210
groups, completion tag . . . . . . . . . . . . . . . . . . . . . . . . 200
H
handle-nonexistent, MIME style. . . . . . . . . . . . . . . 381
handler, MIME style . . . . . . . . . . . . . . . . . . . . . . . . . . . 382
hgrevformat. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 349
hidden, completion style. . . . . . . . . . . . . . . . . . . . . . 210
history-words, completion tag . . . . . . . . . . . . . . . . 200
hooks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 352
hosts, completion style. . . . . . . . . . . . . . . . . . . . . . . 210
hosts, completion tag . . . . . . . . . . . . . . . . . . . . . . . . . 200
hosts-ports, completion style . . . . . . . . . . . . . . . . 210
I
ignore-line, completion style . . . . . . . . . . . . . . . . 210
ignore-parents, completion style . . . . . . . . . . . . 210
ignored-patterns, completion style . . . . . . . . . . 211
indexes, completion tag. . . . . . . . . . . . . . . . . . . . . . . 200
insert, completion style. . . . . . . . . . . . . . . . . . . . . . 211
insert-ids, completion style . . . . . . . . . . . . . . . . . 211
insert-tab, completion style . . . . . . . . . . . . 211, 393
insert-unambiguous, completion style . . . . . . . . 212
interfaces, completion tag . . . . . . . . . . . . . . . . . . . 201
J
jobs, completion tag . . . . . . . . . . . . . . . . . . . . . . . . . . 201
K
keep-prefix, completion style . . . . . . . . . . . . . . . . 212
keymaps, completion tag. . . . . . . . . . . . . . . . . . . . . . . 201
keysyms, completion tag. . . . . . . . . . . . . . . . . . . . . . . 201
known-hosts-files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 212
L
last-prompt, completion style . . . . . . . . . . . . . . . . 212
libraries, completion tag. . . . . . . . . . . . . . . . . . . . . 201
limits, completion tag . . . . . . . . . . . . . . . . . . . . . . . . 201
list, completion style . . . . . . . . . . . . . . . . . . . . . . . . 212
list, widget style. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 377
list-colors, completion style . . . . . . . . . . . . . . . . 212
list-dirs-first, completion style . . . . . . . . . . . 213
list-grouped, completion style. . . . . . . . . . . . . . . 213
list-packed, completion style . . . . . . . . . . . . . . . . 213
list-prompt, completion style . . . . . . . . . . . . . . . . 213
list-rows-first, completion style . . . . . . . . . . . 213
list-separator, completion style . . . . . . . . . . . . 214
list-suffixes, completion style. . . . . . . . . . . . . . 213
local, completion style. . . . . . . . . . . . . . . . . . . . . . . 214
local-directories, completion tag . . . . . . . . . . . 201
M
mail-directory, completion style . . . . . . . . . . . . 214
mailboxes, completion tag. . . . . . . . . . . . . . . . . . . . . 201
mailcap, MIME style . . . . . . . . . . . . . . . . . . . . . . . . . . . 382
mailcap-prio-flags, MIME style. . . . . . . . . . . . . . . 382
mailcap-priorities, MIME style. . . . . . . . . . . . . . . 382
manuals, completion tag. . . . . . . . . . . . . . . . . . . . . . . 201
maps, completion tag . . . . . . . . . . . . . . . . . . . . . . . . . . 201
match, widget style . . . . . . . . . . . . . . . . . . . . . . . . . . . 377
match-original, completion style . . . . . . . . . . . . 214
matcher, completion style. . . . . . . . . . . . . . . . . . . . . 214
matcher-list, completion style. . . . . . . . . . . . . . . 214
max-errors, completion style . . . . . . . . . . . . . . . . . 215
max-exports. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 350
max-matches-width, completion style . . . . . . . . . 215
menu, completion style . . . . . . . . . . . . . . . . . . . . . . . . 216
messages, completion tag. . . . . . . . . . . . . . . . . . . . . . 201
mime-types, MIME style . . . . . . . . . . . . . . . . . . . . . . . . 382
modifiers, completion tag. . . . . . . . . . . . . . . . . . . . . 201
modules, completion tag. . . . . . . . . . . . . . . . . . . . . . . 201
muttrc, completion style. . . . . . . . . . . . . . . . . . . . . . 216
my-accounts, completion tag . . . . . . . . . . . . . . . . . . 201
N
named-directories, completion tag . . . . . . . . . . . 201
names, completion tag . . . . . . . . . . . . . . . . . . . . . . . . . 201
never-background, MIME style . . . . . . . . . . . . . . . . . 382
newsgroups, completion tag . . . . . . . . . . . . . . . . . . . 201
nicknames, completion tag. . . . . . . . . . . . . . . . . . . . . 201
numbers, completion style. . . . . . . . . . . . . . . . . . . . . 216
nvcsformats. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 349
O
old-list, completion style . . . . . . . . . . . . . . . . . . . 217
old-matches, completion style . . . . . . . . . . . . . . . . 217
old-menu, completion style . . . . . . . . . . . . . . . . . . . 217
options, completion tag. . . . . . . . . . . . . . . . . . . . . . . 201
original, completion style . . . . . . . . . . . . . . . . . . . 217
original, completion tag. . . . . . . . . . . . . . . . . . . . . . 201
other-accounts, completion tag. . . . . . . . . . . . . . . 201
other-files, completion tag . . . . . . . . . . . . . . . . . . 201
P
packages, completion tag. . . . . . . . . . . . . . . . . . . . . . 201
packageset, completion style . . . . . . . . . . . . . . . . . 217
pager, MIME style. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 383
pager, nslookup style . . . . . . . . . . . . . . . . . . . . . . . . . 393
parameters, completion tag . . . . . . . . . . . . . . . . . . . 201
path, completion style . . . . . . . . . . . . . . . . . . . . . . . . 218
path-completion, completion style . . . . . . . . . . . 218
path-directories, completion tag . . . . . . . . . . . . 201
paths, completion tag . . . . . . . . . . . . . . . . . . . . . . . . . 202
pine-directory, completion style . . . . . . . . . . . . 218
pods, completion tag . . . . . . . . . . . . . . . . . . . . . . . . . . 202
ports, completion style. . . . . . . . . . . . . . . . . . . . . . . 218
ports, completion tag . . . . . . . . . . . . . . . . . . . . . . . . . 202
prefix-hidden, completion style. . . . . . . . . . . . . . 218
prefix-needed, completion style. . . . . . . . . . . . . . 218
Style and Tag Index 420
prefixes, completion tag. . . . . . . . . . . . . . . . . . . . . . 202
preserve-prefix, completion style . . . . . . . . . . . 218
printers, completion tag. . . . . . . . . . . . . . . . . . . . . . 202
processes, completion tag. . . . . . . . . . . . . . . . . . . . . 202
processes-names, completion tag. . . . . . . . . . . . . . 202
progress, zftp style . . . . . . . . . . . . . . . . . . . . . . . . . . 337
prompt, nslookup style . . . . . . . . . . . . . . . . . . . . . . . . 393
prompt, widget style . . . . . . . . . . . . . . . . . . . . . . . . . . 377
Q
quilt-patch-dir . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 350
quilt-standalone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 350
quiltcommand. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 350
R
range, completion style. . . . . . . . . . . . . . . . . . . . . . . 219
recursive-files, completion style . . . . . . . . . . . 219
reformat-date. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 318
regular, completion style. . . . . . . . . . . . . . . . . . . . . 219
rehash, completion style. . . . . . . . . . . . . . . . . . . . . . 219
remote-access, completion style. . . . . . . . . . . . . . 219
remote-glob, zftp style. . . . . . . . . . . . . . . . . . . . . . . 337
remove-all-dups, completion style . . . . . . . . . . . 219
rprompt, nslookup style. . . . . . . . . . . . . . . . . . . . . . . 393
S
select-prompt, completion style. . . . . . . . . . . . . . 219
select-scroll, completion style. . . . . . . . . . . . . . 220
separate-sections, completion style . . . . . . . . . 220
sequences, completion tag. . . . . . . . . . . . . . . . . . . . . 202
sessions, completion tag. . . . . . . . . . . . . . . . . . . . . . 202
show-ambiguity, completion style . . . . . . . . . . . . 220
show-completer, completion style . . . . . . . . . . . . 220
show-prog . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 318
signals, completion tag. . . . . . . . . . . . . . . . . . . . . . . 202
single-ignored, completion style . . . . . . . . . . . . 220
sort, completion style . . . . . . . . . . . . . . . . . . . . . . . . 220
special-dirs, completion style. . . . . . . . . . . . . . . 220
squeeze-slashes, completion style . . . . . . . . . . . 221
stagedstr . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 351
stop, completion style . . . . . . . . . . . . . . . . . . . . . . . . 221
stop-keys, widget style. . . . . . . . . . . . . . . . . . . . . . . 378
strings, completion tag. . . . . . . . . . . . . . . . . . . . . . . 202
strip-comments, completion style . . . . . . . . . . . . 221
styles, completion tag . . . . . . . . . . . . . . . . . . . . . . . . 202
subst-globs-only, completion style . . . . . . . . . . 221
substitute, completion style . . . . . . . . . . . . . . . . . 221
suffix, completion style. . . . . . . . . . . . . . . . . . . . . . 221
suffixes, completion tag. . . . . . . . . . . . . . . . . . . . . . 202
T
tag-order, completion style . . . . . . . . . . . . . . . . . . 221
tags, completion tag . . . . . . . . . . . . . . . . . . . . . . . . . . 202
targets, completion tag. . . . . . . . . . . . . . . . . . . . . . . 202
time-zones, completion tag . . . . . . . . . . . . . . . . . . . 202
titlebar, zftp style . . . . . . . . . . . . . . . . . . . . . . . . . . 338
toggle, widget style . . . . . . . . . . . . . . . . . . . . . . . . . . 378
types, completion tag . . . . . . . . . . . . . . . . . . . . . . . . . 202
U
unstagedstr. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 351
update, zftp style. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 337
urls, completion style . . . . . . . . . . . . . . . . . . . . . . . . 223
urls, completion tag . . . . . . . . . . . . . . . . . . . . . . . . . . 202
use-cache, completion style . . . . . . . . . . . . . . . . . . 224
use-compctl, completion style . . . . . . . . . . . . . . . . 224
use-ip, completion style. . . . . . . . . . . . . . . . . . . . . . 224
use-prompt-escapes. . . . . . . . . . . . . . . . . . . . . . . . . . . . 352
use-quilt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 350
use-server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 351
use-simple . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 351
users, completion style. . . . . . . . . . . . . . . . . . . . . . . 224
users, completion tag . . . . . . . . . . . . . . . . . . . . . . . . . 202
users-hosts, completion style . . . . . . . . . . . . . . . . 224
users-hosts-ports, completion style . . . . . . . . . 224
V
values, completion tag . . . . . . . . . . . . . . . . . . . . . . . . 202
variant, completion tag. . . . . . . . . . . . . . . . . . . . . . . 202
verbose, completion style. . . . . . . . . . . . . . . . . . . . . 225
verbose, widget style . . . . . . . . . . . . . . . . . . . . . . . . . 378
visuals, completion tag. . . . . . . . . . . . . . . . . . . . . . . 202
W
warn-time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 318
warnings, completion tag. . . . . . . . . . . . . . . . . . . . . . 202
widget, widget style . . . . . . . . . . . . . . . . . . . . . . . . . . 378
widgets, completion tag. . . . . . . . . . . . . . . . . . . . . . . 202
windows, completion tag. . . . . . . . . . . . . . . . . . . . . . . 202
word, completion style . . . . . . . . . . . . . . . . . . . . . . . . 225
Z
zsh-options, completion tag . . . . . . . . . . . . . . . . . . 202