Scribd
Upload
167 views2 pages

Adhesor IFU en

ADHESOR is a two-compound zinc phosphate dental cement manufactured by SpofaDental consisting of powder and liquid. It has multiple indications including use as a base layer under fillings, temporary fillings, crown and bridge bonding, and root canal filling. The document provides details on the mixing ratios, working times, and setting times for different applications. It also lists contraindications and storage instructions and warns that the liquid contains an irritant.

Uploaded by

Alex Panescu
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
167 views2 pages

Adhesor IFU en

ADHESOR is a two-compound zinc phosphate dental cement manufactured by SpofaDental consisting of powder and liquid. It has multiple indications including use as a base layer under fillings, temporary fillings, crown and bridge bonding, and root canal filling. The document provides details on the mixing ratios, working times, and setting times for different applications. It also lists contraindications and storage instructions and warns that the liquid contains an irritant.

Uploaded by

Alex Panescu
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

ADHESOR

Zinc Phosphate Cement



Manufacturer:
SpofaDental a.s., Markova 238, CZ-506 46 Jin, www.spofadental.com

Specification:
A two-compound zinc phosphate cement in the form of powder and liquid.

Indications:
1) Base layer material under amalgam and composite fillings.
2) Temporary fillings.
3) Crown and bridge bonding.
4) Root canal filling.

Contra-indications:
The application of ADHESOR

is contra-indicated in the case of a known hypersensitivity to any component


of the product.

Undesirable side-effects:
With applications in the proximity of a pulp, irritation may occur. Dentine must then be covered with a thin layer
of Ca(OH)
2
-based material.

Working (designed for manual mixing):
The mixing is done on a glass plate with a non-corroding spatula at the temperature of 23 1 C. To extend
the working time, mixing at a temperature below 20 C is recommended. Gradual adding of the powder into
the liquid is also recommended.

a) Base Layers and Fillings:
Mixing ratio:
in weight - 2.30 g of the powder to 0.5 ml of the liquid, i.e. 2.30 g of the powder to 0.80 g of the liquid
in volume - 2 scoops of the powder to 3 drops of the liquid

Mixing time:
2 - 2.5 minutes

Working time:
4 - 4.5 min (from the start of mixing to the start of setting)

Setting time:
6 - 7 min (from the start of mixing to complete setting) The final treatment of the prepared base or filling
can be made immediately upon setting.

b) Fixed Bridge Bonding:
Mixing ratio:
in weight - 1.40 g of the powder to 0.5 ml of the liquid, i.e. 1.40 g of the powder to 0.80 g of the liquid
in volume - 2 scoops of the powder to 5 drops of the liquid

Mixing time:
60 - 90 seconds

Working time:
3-4 min (from the start of mixing to the start of setting)

Setting time:
6-8 min (from the start of mixing to complete setting)

Notice:
The dentine must be covered with a thin layer of a calcium-hydroxide medicament at application of the cement
in close proximity to the pulp. The composition of the liquid and powder is subject to change when exposed
in air, therefore the manufacturer recommends that both containers should be tightly closed.

Warning:
The ADHESOR

liquid contains a component which irritates skin and mucosa.



Storage:
Store in a dry and dark place at 5 - 25 C, in a well sealed container.

Expiry Period:
5 years

Package:
ADHESOR

(80 g of powder + 55 g of the liquid), scoop for powder


ADHESOR

powder 80 g, scoop for powder


ADHESOR

liquid 55 g

Shades:
1 - white
2 - yellow
3 - grey - blue
4 - brown


Last revision date: 7. 4. 2009

You might also like