Scribd Logo
Upload

Welcome to Scribd!

  • 130 views

    Breakdown

    Uploaded by

    GreatVarunkr
    This document summarizes the teardown report of a Beetel CLIP M51 landline phone. It lists the technical specifications and components of the phone. The key components include capacitors, transistors, integrated circuits, resistors, and a speaker. It then calculates the individual costs of each component and totals the material costs. Taking into account assembly, verification, and other production costs, the total cost to manufacture the phone is estimated to be $10.45. The retail price of the phone is $12.5, which makes the price comparable to the total manufacturing costs.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd

    Breakdown

    Uploaded by

    GreatVarunkr
    130 views8 pages
    This document summarizes the teardown report of a Beetel CLIP M51 landline phone. It lists the technical specifications and components of the phone. The key components include capacitors, transistors, integrated circuits, resistors, and a speaker. It then calculates the individual costs of each component and totals the material costs. Taking into account assembly, verification, and other production costs, the total cost to manufacture the phone is estimated to be $10.45. The retail price of the phone is $12.5, which makes the price comparable to the total manufacturing costs.

    Original Description:

    Tear Down Report of a Landline phone

    Copyright

    © © All Rights Reserved

    Available Formats

    DOCX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document summarizes the teardown report of a Beetel CLIP M51 landline phone. It lists the technical specifications and components of the phone. The key components include capacitors, transistors, integrated circuits, resistors, and a speaker. It then calculates the individual costs of each component and totals the material costs. Taking into account assembly, verification, and other production costs, the total cost to manufacture the phone is estimated to be $10.45. The retail price of the phone is $12.5, which makes the price comparable to the total manufacturing costs.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    130 views8 pages

    Breakdown

    Uploaded by

    GreatVarunkr
    This document summarizes the teardown report of a Beetel CLIP M51 landline phone. It lists the technical specifications and components of the phone. The key components include capacitors, transistors, integrated circuits, resistors, and a speaker. It then calculates the individual costs of each component and totals the material costs. Taking into account assembly, verification, and other production costs, the total cost to manufacture the phone is estimated to be $10.45. The retail price of the phone is $12.5, which makes the price comparable to the total manufacturing costs.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    of 8

    TEAR DOWN REPORT OF A LANDLINE

    PRODUCT FEATURES & TECHINCAL DETAILS


    Brand Name : Beetel

    Model: CLIP M 51

    Connectivity Technology : Wired

    Movement Detection : Touch on Keypad

    Width : 10.44 in

    Depth: 2.22 in

    Height : 6.22 in

    Warranty : 1 year Warranty

    PRODUCT DETAILS

    Shipping Weight : 500 grams

    Shipping : Presence in 21 Countries Across Asia, Africa ,Europe

    Model No. : Clip M 51
    Discontinued By Manufacturer : No

    PRODUCT FEATURES
    16-Digit, 3-Line LCD Display

    Programmable Flash

    30 Incoming Calls Memory

    5 Outgoing Calls Memory

    1 Way Speakerphone

    Toggle Mute

    Tone/Pulse Selectable


    DESCRIPTION OF COMPONENTS


    0.01-UF capacitor 100V
    Part No. 2A104J

    Tolerance : +_ 10%
    No. of Pins :2
    Price :$0.04






    10 UF , 63 V
    PART NO. MAL202138109E3
    Tolerance:+_20%
    No. of Pins :2
    Price : $0.1



    104 kpf Capacitor

    Color: Yellow

    Package Type: Through Hole

    Structure: Fixed Capacitor

    Type: Ceramic-dielectric Capacitor

    No. of Pins :2

    Cost : $0.02



    TRANSISTOR

    KSP 42

    No. of Pins :3

    Cost: $0.05





    The IL2418 is a monolithic integrated circuit telephone tone
    ringer with bridge diode, when coupled with an appropriate
    transducer, it replaces the electromechanical bell. The
    device is designed for use with either a piezo transducer or
    an inexpensive transformer coupled speaker to
    produce a pleasing tone composed of a high frequency (fR)
    alternating with a low frequency (fL) resulting in a warble
    frequency. The supply voltage is obtained from the AC ring
    signal and the circuit is designed
    so that noise on the line or variation of the ringing signal
    can not affect correct operation of the device.

    No. of pins :8
    Cost : $0.37



    UTC 8602
    DESCRIPTION
    The UTC KA8602is the audio power amplifier available for low
    voltage. The UTC KA8602 supplies differential outputs for
    maximizing output swing at low voltages. The UTC KA8602does
    not need coupling capacitors to the speaker. The gain of this

    amplifier is controlled easily by two external resistors.

    No. of pins : 8
    Cost : $0.1






    470 UF , 10 V capacitor
    No. of pins:2
    Cost : $0.33

    47 UF , 25 V capacitor
    No. of pins :2
    Cost : $0.1







    100 UF , 25V Capacitor
    No. of pins:2
    Cost : $0.05

















    KEPO 50 OHM 0.25 W 4706

    SPEAKER

    COST: $1.667


    CTBC 556B- Transistor PNP TO-92 65V 0.1A 0.5W
    No. of pins :3
    Cost - $0.05

    PHC6V2 ZENER DIODE
    NO. OF PINS :2
    Cost : $0.033
    PERIDOT VER 2.1 PCB- $0.5

    100 Kohm resistor
    No. of pins 2
    Cost - $0.099
    33 K ohm resistor
    No. of pins -2
    Cost $0.01
    5.2 K ohm resistor
    No. of pins 2
    Cost- $0.01
    4.7 K ohm Resistor
    No. of pins 2
    Cost - $ 0.01
    8.2 K ohm Resistor
    Cost - $0.01
    220 K OHM RESISTOR
    Cost - $0.01
    10 K OHM resistor
    Cost - $0.01
    11.6 K ohm resistor
    Cost- $0.0667
    1.2 M OHM Resistor
    Cost : $ 0.01
    52 K OHM Resistor
    Cost : $ 0.01

    LANDLINE PHONE CASE : BEETEL DFS600 CLIP
    $0.833
    PHONE SWITCHES COST - $0.0333
    Screws - $0.01

    COST ESTIMATION
    Component Name Price ($) Quantity
    0.01 UF Capacitor 0.04 8
    10 UF Capacitor 0.1 3
    104 KPF Capacitor 0.02 5
    KSP42 (Transistor) 0.05 12
    IL2418 0.37 1
    UTC8602 0.1 1
    470 UF Capacitor 0.33 2
    47UF Capacitor 0.1 2
    100 UF Capacitor 0.05 2
    KEPO 50 OHM 0.25W SPEAKER 1.67 1
    CTBC 556B TRANSISTOR 0.05 12
    PHC6V2 ZENER DIODE 0.033 12
    100 K OHM RESISTOR 0.0999 10
    33K OHM RESISTOR 0.01 6
    5.2 K OHM RESISTOR 0.01 3
    4.7 K OHM RESISTOR 0.01 4
    8.2 K OHM RESISTOR 0.01 5
    82 K OHM RESISTOR 0.01 7
    220K OHM RESISTOR 0.01 7
    10 K OHM RESISTOR 0.01 8
    11.6K OHM RESISTOR 0.01 5
    1.2 M OHM RESISTOR 0.01 4
    52 K OHM RESISTOR 0.01 3
    LANDLINE PHONE CASE 0.8333 1
    SWITCHES 0.0333 21
    SCREWS 0.01 12
    ADDITIONAL COST
    Assembly: $1.2433
    Verification : $0.6217

    CONCLUSION :
    Summing up individual components prices and taking other costs of production into account,
    the total cost of manufacturing amounts to $10.4562
    TOTAL COST OF COMPONENTS = $10.4562
    BEETEL DFS600 CLIP RETAIL PRICE = $12.5
    Beetel is an Indian Company, Hence its Retail Price is Comparable with Total Cost of the
    Components
    It was a Unique experience doing this project, as for the first time I broke down an electronic
    device & it was Fun Doing it

    You might also like