Scribd
Upload
615 views2 pages

Inside Step Card - Instructions

I saw a beautiful card online, made by Debbie Henderson, and tried to find measurements... but failed. Here is my take on the card. Enjoy!

Uploaded by

Joan Barley Gross
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
615 views2 pages

Inside Step Card - Instructions

I saw a beautiful card online, made by Debbie Henderson, and tried to find measurements... but failed. Here is my take on the card. Enjoy!

Uploaded by

Joan Barley Gross
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Inside Step Card

Card base = 8x 6 Closed card measures 4x 6


Vertically, line up the left side of the card base on a blade cutter at 4.
Bring the blade to the 3 measurement and cut, from that point, down to
5 STOP



4




2






Flip the card base of a turn to the right (The portion with the cuts closer to the end should be to the left & will be the front of the card)
1) Score at 2 & 4 down to the first cut line (2) STOP
2) Score at 2 & 4 between the two cut lines (2-4) STOP
3) Score at 3 & 5 from the bottom cut line to the end (4-6) STOP



1




2




3






Now, line the left side of the card base on the cutter at 2.
Bring the blade to the 3 measurement and cut, from that point, down to
6 STOP
Fold the card
Mountain (blue arrows)
and
Valley (orange arrows)

Take care when folding. The fact that not all
score lines match up to all cut line ends can
throw you off.
Done correctly, you will have created the 3
steps inside your card.

Measurements for DSP smaller than card base size
Note: This page may not print out to the exact measurements. If you do print it, expecting to use it for your DSP template, check the
measurements before cutting anything. It might be best to make your own template by following the measurements.



































And 3 Squares = 1 for steps


This project was created by me. The pictures & instructions are mine as well.
It is never my intent to copy anyone elses work and claim it as exclusively mine. I only want to share what I
make and explain how I made it to those that would like to know.
Thank you for your interest, and Happy Crafting!!

Joan
[email protected]







2
(each step) 1

2
Card
Front left

3

4

3

3
Card
Inside right
5

You might also like