0% found this document useful (0 votes)
371 views10 pages

Msan Command

This document contains a list of commands for an MSAN01-D6-BPP_3MSC system including commands for: - Entering different states like superuser config state, debug state, and superuser end state - Transferring files, logging in/out, pinging hosts, and saving data - Showing information like configurations, alarms, ports, memory and more - Configuring items like SNMP, SSH, and radius - Managing modems and performing F5 testing

Uploaded by

Roedy Ricky
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
371 views10 pages

Msan Command

This document contains a list of commands for an MSAN01-D6-BPP_3MSC system including commands for: - Entering different states like superuser config state, debug state, and superuser end state - Transferring files, logging in/out, pinging hosts, and saving data - Showing information like configurations, alarms, ports, memory and more - Configuring items like SNMP, SSH, and radius - Managing modems and performing F5 testing

Uploaded by

Roedy Ricky
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
You are on page 1/ 10

MSAN01-D6-BPP_3MSC#?

telnet - telnet adsl port


config - Enter Superuser Config state.
debug - Enter debug state.
ndebug - Enter debug end state.
disable - Exit from Superuser state.
enable - Enter Superuser state.
end - Enter Superuser End state.
exit - Exit intermediate mode
help - Show command help
history - Show command history
load - Transfer file from host PC to main MP via ftp.
logout - Logout from this system.
ping - Ping host.
save - Save data to flash.
show - Show configure data in this device.
sleep - Sleep for n seconds
snmp - config snmp.
version - Swap two ics version.
who - Display users currently logged in
write - Write text to another user
ag - Enter the msag mode
disable - Exit from Superuser state.
enable - Enter Superuser state.
end - Enter Superuser End state.
exit - Exit intermediate mode
help - Show command help
history - Show command history
load - Transfer file from host PC to main MP via ftp.
logout - Logout from this system.
ping - Ping host.
save - Save data to flash.
show - Show configure data in this device.
sleep - Sleep for n seconds
snmp - config snmp.
version - Swap two ics version.
who - Display users currently logged in
write - Write text to another user
ag - Enter the msag mode
modem - manage reomte modem.
f5test - Set the information of f5 test.
ssh - Set ssh property.
radius - Set radius property.
MSAN01-D6-BPP_3MSC# show ?
adsl - Show the information of ADSL slot.
acl - Show access list.
atmbridge - show atmbridge para:
alarm - Show Alarm Information.
card - Query the specified board running version info.
cpu - Show ICS and card cpu.
qryswapstate - show if MP is ready to change-over
namedtimer - Show detailed information.
peer - show R01 socket's node info.
dhcp - Show dhcp property.
dsl - Show the information of ADSL|ADLC slot
file - Query file info stored in the specified board.
igmp - Show IGMP information.
ima - show atm ima para:
iptv - Show iptv information.
mac - Show mac.
mce - Show mce flag.
mstp - Show MSTP information.
mvr - Show multicast vlan register information
memory - Show memory information.
port - Show port information.
oprlog - ShowOprlog function.
qos - Show QOS.
route - Show Route information.
shdsl - Show SHDSL information.
snmp - Show SNMP information.
eth-switch - Show ethernet switch parameters.
syslog - Show port information.
logging - Show logging config or logging file.
system - Show system information.
linkaggregation - Show linkaggregation information.
lacp - Show information about LACP
vbas - Show port information.
vdsl - Show the information of VDSL
modem - Show the information of Modem
vlan - Show VLAN information.
stm1 - show atm stm1 para:
pppoe - Show the information of pppoe
port-location - Show the information of port-location
epon - Show Epon.
stackvlan - Show StackVlan.
macpool - show mac pool.
IPOA - show ipoa para
snmp - Show SNMP information.
eth-switch - Show ethernet switch parameters.
syslog - Show port information.
logging - Show logging config or logging file.
system - Show system information.
linkaggregation - Show linkaggregation information.
lacp - Show information about LACP
vbas - Show port information.
vdsl - Show the information of VDSL
modem - Show the information of Modem
vlan - Show VLAN information.
stm1 - show atm stm1 para:
pppoe - Show the information of pppoe
port-location - Show the information of port-location
epon - Show Epon.
stackvlan - Show StackVlan.
macpool - show mac pool.
IPOA - show ipoa para
vdsl2 - Show the information of VDSL
f5test - Set the information of f5 test.
ssh - Show the information of ssh
radius - Show the information of radius
MSAN01-D6-BPP_3MSC(ag)# get-
get-globalconst - Get the global const information.
get-mgbaseattr - Get the base attribute of MG.
get-mgcapabili - Get the capability of MG.
get-mgmediatos - Get the media tos of MG.
get-mgc - Show the attribute of media gateway controller.
get-snmpcfg - Show the attribute of snmp.
get-ctrlport - Show snmpport,telnetport,etc.
get-system - get system attrib parameter
get-allmgcattr - no help
get-allqovspar - mod qovs' parameters
get-md5info - no help
get-ring - no help
get-ringprofile - no help
get-permatone - no help
get-usedupport - no help
get-flashleng - no help
get-subnet - Show the subnet information.
get-ipaddr - Show the ip address of a pool.
get-macaddr - Get mac address information.
get-logdir - no help
get-rackinfo - Get information of a rack.
get-allrackinfo - Get all the rack information.
get-shelfinfo - Get the shelf information.
get-allshelfinfo - Get all the shelf information.
get-allcfgboard - Show all the board that exists.
get-boardinfo - Show the specified board information.
get-shelfboard - get board info by rack ,shelf
get-board-seqno - get hardware sequence number
get-backboardenflag - no help
get-voip-subtype - show voip sub card type
get-boardipinfo - Show the ip information of the specified board.
get-boardmacinfo - Show the mac address of the specified board.
get-voip-ipaddr - no help
get-sipproxyserver - no help
get-rip-cnic - Show the route information.
get-allnat - Show all the inner route.
get-hw-delay - Get the hw delay.
get-9k52conn - no help
get-calloptimize - no help
get-alerm2csv - no help
get-uplinkdetectpara - no help
get-faxtoneeventflag - no help
get-calllimitpara - no help
get-protocolstate - no help
get-misc - no help
get-as - Get an as attribute.
get-asp - Get an asp attribute.
get-asasp - Get the relation as-asp.
get-dlink - Get the link.
get-dlinkattr - Show link attribute.
get-isdnbra - no help
get-v5if - get v5 interface
get-v5link - show v5 link
get-v5pch - get v5 physic channel
get-allv5lcci - get all v5 logic channel identify
get-v5user - get pstn or isdn user
get-e1attr - get_e1attr
get-e1clkinfo - no help
get-pcmattr - no help
get-v5lccistatus - no help
get-hdb-portnum - no help
get-audb-portconf - no help
get-ddnport - no help
get-ddnconn - no help
get-slcattrib - Show the attribute of a series of subscriber line circu
ts.
get-ipsattrib - Show the attribute of a series of ips circuits.
get-dspattrib - Show the attribute of dsp.
get-slctermid - Show the termination id of an SLC.
get-slcwildcard - Get slc's wildcard.
get-ipstermid - Show the termination id of an IPS.
get-ipswildcard - Get apr's wildcard.
get-rtppar-mpr - Get rtp's parameter.
get-expar-mpr - Get extra rtp's parameter.
get-tlineinfo - get information of test line
get-trunkslctermid - Show the termination id of an TRUNK.
get-trunkslcattrib - Show the attribute of a series of subscriber line circui
ts.
get-fixtonechip - no help
get-slcphonenum - no help
get-rtppar-mprb - no help
get-expar-mprb - no help
get-rtppar-miro - no help
get-rtppar-ti - no help
get-sipuser - no help
get-slcmonitor - no help
get-uport-status - no help
get-sipuser - no help
get-slcmonitor - no help
get-uport-status - no help
get-vbdchannel - no help
get-snooper - no help
get-tonpro - Get protocol tone.
get-tonlst - Get tone list.
get-tonlab - Get tone label.
get-trkattrib - Show the attribute of a series of subscriber line circui
ts.
get-dlcattrib - Show the attribute of a series of subscriber line circui
ts.
get-slcstatus - Show the status of a series of SLC circuits.
get-ipsstatus - Show the status of a series of IPS circuits.
get-confstatus - Show the status of a series of conference circuits.
get-dspstatus - Show the status of a series of dsp circuits.
get-cardstat-ips - Show the status of the specified IPS card.
get-cardstat-conf - Show the status of conference card.
get-cardstat-dsp - Show the status of dsp.
get-bdstat-s - Show the status of SLC board.
MSAN01-D6-BPP_3MSC(ag)#?
add-globalconst - Add global constant information. Usually used for a new
MSAG
mod-globalconst - Config global const.
get-globalconst - Get the global const information.
add-mg - Add a media gateway. Usually used for a new MSAG
add-mgcapabili - Config the capability of MG.
mod-mgbaseattr - Config the basic attribute of MG.
mod-mgcapabili - Config the capability of MG.
mod-mgmediatos - Config the media tos of MG.
get-mgbaseattr - Get the base attribute of MG.
get-mgcapabili - Get the capability of MG.
get-mgmediatos - Get the media tos of MG.
add-mgc - Add a media gateway controller.
del-mgc - Delete a media gateway controller. Used it carefully.
mod-mgc - Config the attribute of a media gateway controller.
get-mgc - Show the attribute of media gateway controller.
add-snmpcfg - Add a snmp.
del-snmpcfg - Delete a snmp. Used it carefully.
mod-snmpcfg - Config the attribute of a snmp.
get-snmpcfg - Show the attribute of snmp.
add-ctrlport - Add snmpport,telnetport,etc.
del-ctrlport - Delete snmpport,telnetport,etc.
mod-ctrlport - Config snmpport,telnetport,etc.
get-ctrlport - Show snmpport,telnetport,etc.
add-libdata - Add lib data.
mod-system - mod system attrib parameter
get-system - get system attrib parameter
add-mgcattr - no help
mod-mgcattr - no help
get-allmgcattr - no help
del-mgcattr - no help
mod-qovspar - mod qovs' parameters
get-allqovspar - mod qovs' parameters
add-md5info - no help
del-md5info - no help
mod-md5info - no help
get-md5info - no help
mod-mgip - Modify the MG ip.
check-db - check weather the db is same with flash.
mod-ring - no help
get-ring - no help
mod-ringprofile - no help
get-ringprofile - no help
load-dftringprof - no help
mod-permatone - no help
get-permatone - no help
mod-usedupport - mod upport rate threshold.
get-usedupport - no help
mod-flashleng - no help
get-flashleng - no help
add-subnet - Add a subnet.
del-subnet - Delete a subnet.
mod-subnet - Modify the subnet.
get-subnet - Show the subnet information.
add-multi-ip - Add multi ipaddress.
del-multi-ip - Delete multi ip address.
add-inipaddr - Add an inner ip address to the pool.
del-inipaddr - Delete an inner ip address from the pool.
add-exipaddr - Add an extern ip address to the pool.
del-exipaddr - Delete an extern ip address from the pool.
get-ipaddr - Show the ip address of a pool.
add-multi-mac - Add multi mac address.
del-multi-mac - Delete multi mac address.
add-macaddr - Add a mac address to the pool.
del-macaddr - Delete a mac address from the pool.
get-macaddr - Get mac address information.
mod-logdir - no help
get-logdir - no help
add-rack - Add a new rack.
del-rack - Delete a rack.
get-rackinfo - Get information of a rack.
get-allrackinfo - Get all the rack information.
add-shelf - Add a shelf to a rack.
del-shelf - Delete a shelf from a rack.
get-shelfinfo - Get the shelf information.
get-allshelfinfo - Get all the shelf information.
get-allcfgboard - Show all the board that exists.
get-boardinfo - Show the specified board information.
add-board-mics - add main ICS board
del-board-mics - delete main ICS board
add-board-mpr - Add MPR board.
del-board-mpr - Delete MPR board.
add-board-mprb - Add MPR board.
del-board-mprb - Delete MPR board.
add-board-sics - Add slave ICS board.
del-board-sics - Delete msag ics board.
add-board-slc - no help
del-board-slc - Delete msag slc board.
add-board-tslc - Add msag tslc board.
del-board-tslc - Delete msag tslc board.
add-board-pwr - Add APOW board.
del-board-pwr - Delete APOW board.
get-shelfboard - get board info by rack ,shelf
add-board-tsld - Add msag tsld board.
del-board-tsld - Delete msag tsld board.
add-board-pwr2 - Add APOW board.
del-board-pwr2 - Delete APOW board.
add-board-scard - no help
del-board-scard - no help
add-board-pnp - no help
add-board-epc - no help
del-board-epc - no help
add-board-sics-remot - no help
get-board-seqno - get hardware sequence number
mod-board-seqno - modify hardware sequence number
add-board-tslce - no help
del-board-tslce - Delete msag tsld board.
mod-backboardenflag - no help
get-backboardenflag - no help
add-shelf-pnp - no help
get-voip-subtype - show voip sub card type
get-boardipinfo - Show the ip information of the specified board.
get-boardmacinfo - Show the mac address of the specified board.
mod-ipaddr-mpr - Modify the ip address of the MPR.
del-ipaddr-mpr - Delete the ip address of MPR.
mod-ipaddr-ics - Modify the ip address of the ICS.
del-ipaddr-ics - Delete the ip address of ICS.
mod-macaddr-mpr - Modify the mac address of MPR.
del-macaddr-mpr - Delete the mac address of MPR
mod-macaddr-ics - Modify the mac address of ICS.
del-macaddr-ics - Delete the mac address of ICS.
mod-exip-cnic - modify extern ipaddr of ICS board,phyport is 5 and ipno
is 2--7
del-exip-cnic - delete extern ipaddr of ICS board,phyport is 5 and ipno
is 2--7
add-voip-interface - no help
del-voip-interface - no help
add-voip-route - no help
mod-voip-route - no help
del-voip-route - no help
get-voip-ipaddr - no help
add-sipproxyserver - no help
del-sipproxyserver - no help
get-sipproxyserver - no help
add-general-rip - Add nexthop to an nic port.
del-general-rip - Delete the nexthop of nic port.
get-rip-cnic - Show the route information.
add-mednat - Add an inner route.
del-mednat - Delete an inner route.
get-allnat - Show all the inner route.
add-digitmap - Add a static digitmap.
del-digitmap - Delete a digitmap.
mod-hw-delay - Modify the hw delay.
get-hw-delay - Get the hw delay.
mod-9k52conn - no help
get-9k52conn - no help
mod-calloptimize - no help
get-calloptimize - no help
get-alerm2csv - no help
mod-alerm2csv - no help
get-uplinkdetectpara - no help
mod-uplinkdetectpara - no help
mod-faxtoneeventflag - Configure whether the events detected by MPRB will be re
ported to SS.
get-faxtoneeventflag - no help
get-calllimitpara - no help
mod-calllimitpara - no help
get-protocolstate - no help
service-control - no help
mod-misc - no help
get-misc - no help
add-as - Add an as.
del-as - Delete an as, must not in asasp.
mod-as - Config the as attribute.
get-as - Get an as attribute.
add-asp - Add an asp.
del-asp - Delete an asp,must not in asasp.
mod-asp - Config an asp attribute.
get-asp - Get an asp attribute.
add-asasp - Add the relation as-asp.
del-asasp - Delete the relation as-asp.
get-asasp - Get the relation as-asp.
add-dlink-span - Add dlink for 2B+D, 30B+D, 23B+D.
del-dlink-span - Delete the link.
get-dlink - Get the link.
mod-dlinkattr - Config link attribute.
get-dlinkattr - Show link attribute.
add-isdnbra - no help
del-isdnbra - no help
get-isdnbra - no help
add-board-odti - add dti board for E1
del-board-odti - del dti board for E1
add-board-nhwi - no help
del-board-nhwi - no help
add-board-ist - no help
del-board-ist - no help
add-board-trk - no help
del-board-trk - no help
add-v5if - add v5 interface
del-v5if - del v5 interface
mod-v5if - modify v5 interface
get-v5if - get v5 interface
add-v5link - add v5 link
del-v5link - del v5 link
mod-v5link - mod v5 link
get-v5link - show v5 link
add-v5pch - add v5 physic channel
del-v5pch - del v5 physic channel
get-v5pch - get v5 physic channel
mod-v5pg1 - no help
add-v5lcci - add v5 logic channel identify
del-v5lcci - del v5 logic channel identify
get-allv5lcci - get all v5 logic channel identify
mod-v5protcl - modify v5 logic channel varrible
add-v5pstnuser - add pstn user
get-v5user - get pstn or isdn user
del-v5pstnuser - del pstn user
mod-v5pstnuser - no help
mod-e1attr - only mod e1attr officetype
get-e1attr - get_e1attr
add-v5isdnuser - add isdn user
del-v5isdnuser - del isdn user
mod-v5isdnuser - mod isdn user
mod-v5pstnloc - change pstn user pos without changing L3 addr
mod-e1clkrank - no help
mod-e1clktype - no help
get-e1clkinfo - no help
mod-pcmattr - no help
get-pcmattr - no help
get-v5lccistatus - no help
add-ddnport - add ddn port
del-ddnport - del ddn port
add-ddnconn - add ddn connection
del-ddnconn - del ddn connection
mod-hdb-portnum - no help
get-hdb-portnum - no help
mod-audb-portconf - modify audb ddn port config
get-audb-portconf - no help
get-ddnport - no help
get-ddnconn - no help
add-v5isdn-prauser - no help
del-v5isdn-prauser - no help
mod-slcattrib - Modify the attribute of a series of subscriber line circ
uits.
get-slcattrib - Show the attribute of a series of subscriber line circui
ts.
mod-ipsattrib - Modify the attribute of a series of ips circuits.
get-ipsattrib - Show the attribute of a series of ips circuits.
mod-dspattrib - Modify the attribute of dsp.
get-dspattrib - Show the attribute of dsp.
add-slctermid - Add a termination id to an SLC.
del-slctermid - del termination id of slc
get-slctermid - Show the termination id of an SLC.
get-slcwildcard - Get slc's wildcard.
add-ipstermid - Add a termination id to an ips circuit.
del-ipstermid - Delete an termination id from an IPS.
get-ipstermid - Show the termination id of an IPS.
get-ipswildcard - Get apr's wildcard.
mod-rtppar-mpr - Config rtp's parameter.
get-rtppar-mpr - Get rtp's parameter.
mod-expar-mpr - Config extra rtp's parameter.
get-expar-mpr - Get extra rtp's parameter.
get-tlineinfo - get information of test line
mod-tlinegroup - modify group of test line
del-trunkslctermid - Delete termination id of an TRUNK.
add-trunkslctermid - add termination id of TRUNK
get-trunkslctermid - Show the termination id of an TRUNK.
get-trunkslcattrib - Show the attribute of a series of subscriber line circui
ts.
mod-trunkuser - only for db development
mod-fixtonechip - no help
get-fixtonechip - no help
mod-slcphonenum - no help
get-slcphonenum - no help
del-slcphonenum - no help
mod-rtppar-mprb - no help
get-rtppar-mprb - no help
mod-expar-mprb - no help
get-expar-mprb - no help
mod-rtppar-miro - no help
get-rtppar-miro - no help
mod-rtppar-ti - no help
get-rtppar-ti - no help
add-sipuser - no help
get-sipuser - no help
del-sipuser - no help
mod-slcmonitor - no help
get-slcmonitor - no help
mod-uport-status - no help
get-uport-status - no help
mod-vbdchannel - no help
get-vbdchannel - no help
mod-snooper - no help
mod-snooper-enable - no help
get-snooper - no help
add-tonpro - Add protocol tone.
del-tonpro - Delete protocol tone.
mod-tonpro - Modify protocol tone.
get-tonpro - Get protocol tone.
add-tonlst - Add tone list.
del-tonlst - Delete tone list.
mod-tonlst - Modify tone list.
get-tonlst - Get tone list.
add-tonlab - Add tone label.
del-tonlab - Delete tone label.
mod-tonlab - Modify tone label.
get-tonlab - Get tone label.
mod-trkattrib - Modify the attribute of a series of subscriber line circ
uits.
get-trkattrib - Show the attribute of a series of subscriber line circui
ts.
mod-dlcattrib - Modify the attribute of a series of subscriber line circ
uits.
get-dlcattrib - Show the attribute of a series of subscriber line circui
ts.
get-slcstatus - Show the status of a series of SLC circuits.
block-slc - Block a series of SLC circuits.
unblock-slc - Unblock a series of SLC circuits.
get-ipsstatus - Show the status of a series of IPS circuits.
block-ips - Block a series of IPS circuits.
unblock-ips - Unblock a series of IPS circuits.
get-confstatus - Show the status of a series of conference circuits.
block-conf - Block a series of conference circuits.
unblock-conf - Unblock a series of conference circuits.
get-dspstatus - Show the status of a series of dsp circuits.
block-dsp - Block a series of dsp circuit.
unblock-dsp - Unblock a series of dsp circuits.
get-cardstat-ips - Show the status of the specified IPS card.
get-cardstat-conf - Show the status of conference card.
get-cardstat-dsp - Show the status of dsp.
get-bdstat-s - Show the status of SLC board.
get-bdstat-c - Show the status of specified board.
get-tsstatus - Show tnet hw/ts status.
block-ts - Block tnet resource.
unblock-ts - Unblock tnet resource.
get-slcstatistic - no help
get-ipsstatistic - no help
get-trunkstatus - no help
get-sunitinfo - Show sunit information.
get-slcstatistic - no help
get-ipsstatistic - no help
get-trunkstatus - no help
get-sunitinfo - Show sunit information.
get-tsconninfo - Show hw/ts connecting information.
get-slnconninfo - Show sln connecting information.
get-resoucestat - Show statistics of resources.
get-board-slc - Get slc boardtype! Only for narrow card.
get-hwmap - no help
get-hwset - no help
get-unitinfo - no help
start-bert - no help
get-bert - no help
stop-bert - no help
init-agcmd-cfg - Initialize agcmd.cfg.
get-alltables - Show all table information.
get-tabletuple - Show the table record.
get-tablepkey - Show information about table index.
get-tableindex - Show record by index.
get-tablequeue - Show table queue information.
del-tabletuple - Show the table record.

You might also like