C

M
Y
K
C
M
Y
K
Bostik
P r o d u c t D a t a S h e e t
IMPORTANT NOTICE
All statements, technical information and recommendations set forth herein are based on tests which Bostik believes to
be reliable. However, Bostik does not guarantee their accuracy or completeness. The buyer should conduct its own tests
of this product before use to determine proper preparation technique and suitability for proposed application. Any sales
of this product shall be on terms and conditions set forth on Bostiks order acknowledgment. Bostik warrants that the
product conforms with Bostik written specifications, and is free from defects. BOSTIK DISCLAIMS ALL OTHER
WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE. THE BUYERS SOLE REMEDY FOR NONCOMPLIANCE WITH THIS WARRANTY SHALL BE FOR
THE REPLACEMENT OF THE PRODUCT OR REFUND OF THE BUYERS PURCHASE PRICE. IN NO CASE WILL BOSTIK BE
LIABLE FOR DIRECT, CONSEQUENTIAL ECONOMIC OR OTHER DAMAGES.
920Urethane
Adhesive/Sealant
TYPICAL UNCURED PROPERTIES*
Property Value
Tool/Work Life ..................................................70 minutes
Tack Free Time ........................................................6 hours
Curing Time @77F................................................3-6 days
Flow, sag or slump..................................................0.1 inch
Staining......................................................................None
TYPICAL CURED PROPERTIES*
(AFTER 14 DAYS CURE AT 77F AND 50% RH)
Property Value
Hardness (Shore A) 38
Modulus @ 100% Elongation....................................70 psi
Tensile Strength ......................................................180 psi
Elongation................................................................950%
Adhesion in Peel ....................................................>35 piw
Ozone Resistance ..................................................Excellent
Joint Movement Capability ........................................25%
UV Resistance ............................................................Good
Temp. Resistance** ......................................-40F to 180F
* Values given above are not intended to be used in specification preparation.
** Temperature resistant characteristics is for intermittent contact only.
PRODUCT DESCRIPTION
Bostik Marine 920 is a one part, gun grade urethane
sealant/adhesive that moisture cures to an extremely tough,
resilient seal which exhibits excellent tear and abrasion
resistance while retaining permanent elastomeric properties. It
has tenacious adhesion to most common marine substrates
including virtually all woods, metal, FRP and most plastics.
Marine 920 can be used as either an adhesive or as a sealant.
TYPICAL APPLICATIONS
Bostik Marine 920 is recommended for any marine application
above or below the water line where a quality elastomeric seal
is required. It is suitable for sealing hardware around windows
and doors, deck to hull assembly, hull seams, keel joints and
under moldings.
Bostik Marine 920 is not designed as a glazing sealant in which
the adhesive bond to glass is exposed to sunlight and
appreciable amounts of ultraviolet radiation.
Bostik Marine 920 should NOT be used when the temperature
is below 40 F.
CLEAN-UP
Use Bostik Hand & Tool Towels to clean excess sealant from all
surfaces and tools while still uncured. Cured sealant can be
removed with a sharp blade.
NOTE: Cured sealant is usually very difficult to remove without
altering or damaging the surface to which the sealant was
applied.
SHELF LIFE
When stored at or below 80F (27C), Bostik Marine 920
polyurethane sealant has a shelf life of twelve months from date
of manufacture.
M12-06/08/07
Bostik, Inc.
211 Boston Street
Middleton, MA 01949-2128
Customer or Technical Service:
1-800-7/BOSTIK
Fax: 978-750-7293
www.bostik-us.com

C
M
Y
K
C
M
Y
K
Bostik
P r o d u c t D a t a S h e e t
IMPORTANT NOTICE
All statements, technical information and recommendations set forth herein are based on tests which Bostik believes to
be reliable. However, Bostik does not guarantee their accuracy or completeness. The buyer should conduct its own tests
of this product before use to determine proper preparation technique and suitability for proposed application. Any sales
of this product shall be on terms and conditions set forth on Bostiks order acknowledgment. Bostik warrants that the
product conforms with Bostik written specifications, and is free from defects. BOSTIK DISCLAIMS ALL OTHER
WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE. THE BUYERS SOLE REMEDY FOR NONCOMPLIANCE WITH THIS WARRANTY SHALL BE FOR
THE REPLACEMENT OF THE PRODUCT OR REFUND OF THE BUYERS PURCHASE PRICE. IN NO CASE WILL BOSTIK BE
LIABLE FOR DIRECT, CONSEQUENTIAL ECONOMIC OR OTHER DAMAGES.
920Urethane
Adhesive/Sealant
TYPICAL UNCURED PROPERTIES*
Property Value
Tool/Work Life ..................................................70 minutes
Tack Free Time ........................................................6 hours
Curing Time @77F................................................3-6 days
Flow, sag or slump..................................................0.1 inch
Staining......................................................................None
TYPICAL CURED PROPERTIES*
(AFTER 14 DAYS CURE AT 77F AND 50% RH)
Property Value
Hardness (Shore A) 38
Modulus @ 100% Elongation....................................70 psi
Tensile Strength ......................................................180 psi
Elongation................................................................950%
Adhesion in Peel ....................................................>35 piw
Ozone Resistance ..................................................Excellent
Joint Movement Capability ........................................25%
UV Resistance ............................................................Good
Temp. Resistance** ......................................-40F to 180F
* Values given above are not intended to be used in specification preparation.
** Temperature resistant characteristics is for intermittent contact only.
PRODUCT DESCRIPTION
Bostik Marine 920 is a one part, gun grade urethane
sealant/adhesive that moisture cures to an extremely tough,
resilient seal which exhibits excellent tear and abrasion
resistance while retaining permanent elastomeric properties. It
has tenacious adhesion to most common marine substrates
including virtually all woods, metal, FRP and most plastics.
Marine 920 can be used as either an adhesive or as a sealant.
TYPICAL APPLICATIONS
Bostik Marine 920 is recommended for any marine application
above or below the water line where a quality elastomeric seal
is required. It is suitable for sealing hardware around windows
and doors, deck to hull assembly, hull seams, keel joints and
under moldings.
Bostik Marine 920 is not designed as a glazing sealant in which
the adhesive bond to glass is exposed to sunlight and
appreciable amounts of ultraviolet radiation.
Bostik Marine 920 should NOT be used when the temperature
is below 40 F.
CLEAN-UP
Use Bostik Hand & Tool Towels to clean excess sealant from all
surfaces and tools while still uncured. Cured sealant can be
removed with a sharp blade.
NOTE: Cured sealant is usually very difficult to remove without
altering or damaging the surface to which the sealant was
applied.
SHELF LIFE
When stored at or below 80F (27C), Bostik Marine 920
polyurethane sealant has a shelf life of twelve months from date
of manufacture.
M12-06/08/07
Bostik, Inc.
211 Boston Street
Middleton, MA 01949-2128
Customer or Technical Service:
1-800-7/BOSTIK
Fax: 978-750-7293
www.bostik-us.com