Department of Mechanical and Automobile

Engineering



SCHEDULE


Confirmation Letter - 30th April

Commencement of Training June-July, 2014 (Tentative)

Submission of Report September, 2014

Viva voice examination September, 2014

Feedback to coordinator once a week


































Department of Mechanical and Automobile
Engineering




GUIDELINES FOR PROJECT REPORT

1. Copy of training certificate must be produced. Student will not be eligible for
evaluation without training certificate.
2. Student will have to maintain a diary of daily work. The diary has to be
countersigned by supervisor of the industry. The diary has to be submitted with
the department.
3. Report should contain adequate details and should be of approximately 40-60
pages.
4. Two copies of report must be submitted to the department.
5. The report shall be computer typed ( Font -Times Roman, Size-12 point) and
printed on A4 size paper.
6. The report shall be soft bound with thick cover page in light blue color.
7. The report shall be typed on one side only with one and half space with a margin
3.5 cm on the left, 2.5 cm on the top, and 1.25 cm on the right and at bottom.
8. In the report, the sequence of contents should be followed as given below.


























Department of Mechanical and Automobile
Engineering





PROJECT TITLE
(Font size 16, Bold)





Summer Training Report
( Font size 12)








NAME OF STUDENT
ROLL NO.
( Font size 14 bold)







Department of Mechanical & Automobile Engineering
( Font size 14)
Sharda University, Greater Noida
( Font size 16 bold)

June, 2014

Department of Mechanical and Automobile
Engineering





PROJECT TITLE
(Font size 16, Bold)





Summer Training Report
( Font size 12)


Submitted in partial fulfillment of the requirements for the degree of
( Font size 12 italic)




BATCHELOR OF TECHNOLOGY
( Font size 14)


by



NAME OF STUDENT
ROLL NO.
( Font size 14 bold)




Department of Mechanical & Automobile Engineering
( Font size 14)
Sharda University, Greater Noida
( Font size 16 bold)

June, 2014

Department of Mechanical and Automobile
Engineering



APPROVAL SHEET




Summer training report, entitled: (Title of the project) is
approved for award of 12 credits.





Examiners

__________________


__________________




Coordinator



__________________


Head of Department


__________________







Date:

Department of Mechanical and Automobile
Engineering



Certificate from the Industry (Should be on the Industrys letterhead)



(Desirable format is given below)


CERTIFICATE
(18, bold, underline)



This is to certify that Mr. / Ms.___________________________ has partially
completed / completed / not completed the Industrial Training in our Organization /
Industry during 1
st
June, 2014 to 15
th
July, 2014. He / She was trained in the field of
______________ ____________________________________________________
__________. His / Her overall performance during the period was Excellent / Very
Good / Good / Average / Poor.





Manager/Guide












Department of Mechanical and Automobile
Engineering




ACKNOWLEDGEMENT


I would like to place on record my deep sense of gratitude to (XYZ
NAME,DEPARTMENT, COMPANY NAME, PLACE, for his generous guidance,
help and useful suggestions.

I express my sincere gratitude to ANY FACULTY OR SUPPORTING MEMBER
NAME , Dept. of Mechanical and Automotive Engineering, Sharda University, Greater
Noida, for his stimulating guidance, continuous encouragement and supervision
throughout the course of present work.

I also wish to extend my thanks to XYZ NAME, etc. and other colleagues for attending
my seminars and for their insightful comments and constructive suggestions to improve
the quality of this research work.

I am extremely thankful to Prof. NAME, Head, Dept. of Mechanical and Automotive
Engineering, Sharda University, Greater Noida, for providing me infrastructural
facilities to work in, without which this work would not have been possible.








Signature of the student





Department of Mechanical and Automobile
Engineering



TABLE OF CONTENTS


ACKNOWLEDGEMENTS i
ABSTRACT ii
LIST OF TABLES iv
LIST OF FIGURES v
ABBREVIATIONS vi
NOTATIONS vii
INTRODUCTION 1
Industry ..................... 2
(A brief introduction of industry)
Purpose.. 2
(Statement of the specific work done in the industry)

INDUSTRY/ORGANIZATION . . -
(History, turnover, management, turnover, products. Break the information into
suitable subtitles)
SPECIFIC WORK/PROJECT . . -
(Purpose, procedures, software and hardware tools, machinery used, design,
inspection, maintenance, results etc. Break the information into suitable subtitles)
CONCLUSION . . -
(Write the outcome of your work, Break the information into suitable subtitles)
REFERNCE . . -
(Mention the books, and published materials used if any in a suitable format)

Department of Mechanical and Automobile
Engineering



SUMMER TRAINING EVALUATION

COURSE:
SEMESTER:
PROJECT TITLE:
STUDENT NAME:
ROLL NUMBER:


S.No. Description Total Marks Mark
Awarded
1. Training Diary with attendance 50
2. Training Report

100
3. Presentation 50
4. Viva
(For self arranged training 25
marks)
100
Total 300
EXAMINERS NAME INITIALS DATE
Internal
External