Scribd
Upload
268 views2 pages

FMC150 Data Sheet

This document describes the FMC150, a digital signal processing daughter card that provides dual 14-bit analog-to-digital conversion and dual 16-bit digital-to-analog conversion. It has features such as front panel input/output, conduction cooling compatibility, and flexible clocking. The FMC150 is compliant with VITA 57.1 standards and uses TI ADC and DAC chips to support sample rates up to 250 MSPS for A/D and 800 MSPS for D/A. It is well-suited for applications including software defined radio, radar, medical devices, and aerospace instrumentation.

Uploaded by

Lieza Othman
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
268 views2 pages

FMC150 Data Sheet

This document describes the FMC150, a digital signal processing daughter card that provides dual 14-bit analog-to-digital conversion and dual 16-bit digital-to-analog conversion. It has features such as front panel input/output, conduction cooling compatibility, and flexible clocking. The FMC150 is compliant with VITA 57.1 standards and uses TI ADC and DAC chips to support sample rates up to 250 MSPS for A/D and 800 MSPS for D/A. It is well-suited for applications including software defined radio, radar, medical devices, and aerospace instrumentation.

Uploaded by

Lieza Othman
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

www.4dsp.

com
For Digital Signal Processing
design & system integration
Corporate Ofces:
4DSP LLC
1210 San Antonio Street Suite 801
Austin
TX 78701 USA
T +1 800 816 1751

[email protected]
European Ofces:
4DSP BV

Ondernemingsweg 66f

2404 HN
Alphen a/d Rijn

The Netherlands
T +31 (0) 172 782 190

[email protected]
Onderkant tussenkop op deze lijn
Onderkant kop op deze lijn
www en kader tot hier
rev-1.1
FMC150 low pin count FMC ADC/DAC
Dual 14-bit A/D & Dual 16-bit D/A
Description
The FMC150 is a dual channel A/D and dual channel D/A FMC daughter card.
The card provides two 14-bit A/D channels and two 16-bit D/A channels which can
be clocked by an internal clock source (optionally locked to an external reference)
or an externally supplied sample clock. In addition there is one trigger input for
customized sampling control. The FMC150 daughter card is mechanically and
electrically compliant with FMC standard (ANSI/VITA 57.1).
The FMC150 has a low-pin count connector, front panel I/O, and can be used in a
conduction cooled environment.
The design is based on TIs ADS62P49 dual channel 14-bit 250Msps ADC and TIs
DAC3283 dual channel 16-bit 800Msps DAC. The analog signals are AC coupled
connecting to MMCX or SSMC coax connectors on the front panel.
The FMC150 allows exible control on clock source, analog input gain, and offset
correction through serial communication busses. Furthermore the card is equip-
ped with power supply and temperature monitoring and offers several power-down
modes to switch off unused functions, reducing system level power and heat and
is well suited for software dened radio (SDR), battery or other low power source
applications. This is ideal for applications such as airborne where power demand
effects mission range and on-station mission time.
Features
Quad Channel Operation
- 2-channels 14-bit A/D up to 250 Msps
- 2-channels 16-bit D/A up to 800 Msps
VITA 57.1-2010 compliant
Conduction Cooled - Standard Option
Single ended AC-coupled analog signals
6 MMCX/SSMC connectors available from
the front panel
Clock Source, Sampling Frequency,
and Calibration settings through
SPI communication busses
Flexible clock tree enables:
- internal clock source (VCXO)
- external sampling or reference clock
Power-down modes to switch off unused
functions for system power savings
Mil-I-46058c Conformal Coating Compliant
(optional)
LPC - Low Pin Count Connector
LVDS and 1.65V to 3.3V IO signalling

Applications
Direct RF Down Conversion
Software defned radio (SDR)
RADAR/SONAR
Ultra Wideband Satellite Digital Receiver
Medical equipment
Aerospace and test instrumentation
Support
Stellar IP available for this product. A simple
way to design FPGA rmware with automated
code and bitstream generation.
Reference frmware design (VHDL)
ML605, SP605 and SP601 reference design
available
User Manual
Reference ISE project for Virtex-6 and Spartan-6
DAC3283
800 Msps
16-bit
Clock tree
CDCE72010
External
Trigger
External Clock/
Reference
LVDS Clock [1]
Control
LVDS Trigger [1]
Monitoring
AMC7823
AC
Coupling
AC
Coupling
Control
LVDS Data [14]
LVDS Clock [1]
LVDS Clock [1]
LVDS Data [8]
LVDS Frame [1]
Control
Channel C
D/A
Channel D
Channel A
A/D
Channel B
F
M
C

L
o
w
-
p
i
n

C
o
u
n
t

1
6
0
-
p
i
n
s
L
V
D
S

/

L
V
C
M
O
S

2
.
5
V
ADS62P49/
ADS4249
250 Msps, 14-bit
AC
Coupling
AC
Coupling
www.4dsp.com/FMC150
FMC150
certied to
AS9100
www.4dsp.com
For Digital Signal Processing
design & system integration
Corporate Ofces:
4DSP LLC
1210 San Antonio Street Suite 801
Austin
TX 78701 USA
T +1 800 816 1751

[email protected]
European Ofces:
4DSP BV

Ondernemingsweg 66f

2404 HN
Alphen a/d Rijn

The Netherlands
T +31 (0) 172 782 190

[email protected]
Onderkant tussenkop op deze lijn
Onderkant kop op deze lijn
www en kader tot hier
rev-1.1
Ordering information Environmental Level A Level B
Operating Temperature 0C to 70C -40C to 85C
Storage Temperature -50C to 125C -50C to 125C
Humidity-Operating 0 to 100% non-
condensing
0 to 100% non-
condensing
Storage Humidity 0 to 100% 0 to 100%
Vibration Random 0.1 g
2
/Hz
10 - 3kHz
0.1 g
2
/Hz
10 - 3kHz
Shock 30g peak 30g peak
Coating none Conformal
FMC150-2-1-1-1
Temperature Range
Industrial (-40C to + 85C) = 1
Commercial (0C to + 70C) = 2
Card Type
FMC150 = 0
Connector Type
Standard Feature - MMCX (snap coupling) = 1
SSMC (screw coupling) = 2
VCXO Option
Standard Feature - VCXO option 491.52MHz = 1
VCXO option 737.28MHz = 2
Custom VCXO option (contact factory) = 3
Mil-I-46058c Conformal Coating
No Conformal Coating = 1
Add Conformal Coating = 2
Talk to us about your algorithmic requirements, 4DSP is a full-service rmware and software development house. We are a specialist at high
performance FFT and Video Processing. Check with us, we may have IP Cores that meet requirements for your application, right off the shelf.
FMC150

You might also like