LEDEEN Actuator and Control Solutions

Innovative solutions for pneumatic, hydraulic, gas-over-oil,

direct gas and subsea applications.
LEDEEN ACTUATOR AND CONTROL SOLUTIONS
Introduction ................................................................................................. 2
Quarter-turn Core Products
Congurations....................................................................................... 3
Modular Assembly ................................................................................. 4
Frame Design ......................................................................................... 5
Power Cylinder and Spring Cartridge Design .......................................... 6
Override Options and Certications ....................................................... 7
Core Product Types
Quarter-turn Pneumatic .................................................................... 8
Quarter-turn Pneumatic (VA Series) ................................................... 9
Quarter-turn Hydraulic ...................................................................... 10
Quarter-turn Hydraulic Subsea .......................................................... 11
Quarter-turn Gas-over-oil .................................................................. 12
Quarter-turn Direct Gas .................................................................... 13
Linear Core Product Types
Linear Pneumatic .............................................................................. 14
Linear Hydraulic ................................................................................ 15
Linear Gas-over-oil ............................................................................ 16
Linear Subsea ................................................................................... 17

Table of Contents
Controls and Accessories
Low-pressure Pneumatic .................................................................. 18
Hydraulic Self-contained ................................................................... 19
Hydraulic Power Unit ........................................................................ 20
High-pressure Gas. ............................................................................ 21
Electronic Linebreak .......................................................................... 22
Position-monitoring Switches ............................................................ 23
Technology and Quality ................................................................................ 24
CAMSERV Services for Actuation and Valves ................................................ 25
1
2
Camerons LEDEEN

actuator and control solutions have been consistently providing exceptional

valve automation performance to the oil and gas industry for more than 60 years. Starting in
1948, a robust product design was introduced based upon solid engineering principles with a
commitment to continuous improvement. Each successive year was guided consistently by those
foundational principles while gaining product exposure to a wide range of operational conditions.
Meanwhile, an extensive accumulation of first-hand application experience was being established.
This resulted in Camerons ability to provide field-proven solutions that are known to be fit for
purpose and reliable.
Theres no shortcut or substitution for valuable product knowledge obtained through years of
successful operations in the brutal environmental conditions of desert, arctic, offshore or subsea
applications. Relying upon this extensive global experience and applying it during the evaluation
of every requirement is a commitment to best practices that every customer benefits from when
working with Cameron. Whether the need for valve automation is considered basic or complex,
upstream to downstream, onshore to offshore, every application deserves the benefits that our
LEDEEN actuator and control solutions can provide.
LEDEEN Actuator and Control Solutions
SOLID ENGINEERING PRINCIPLES. FIELD-PROVEN EXPERIENCE.
CUSTOMER-CONFIDENT SOLUTIONS.
Quarter-turn Core Products
PNEUMATIC
HYDRAULIC
GAS-OVER-OIL
Spring Return
Spring Return
Double Acting Double Acting
Double Acting
Double Acting
DIRECT GAS
3
CONFIGURATIONS
Consistent and Flexible
Consistent engineering design and effcient modular
assembly allows increased operational fexibility to be
achieved. Double-acting, spring fail close/open or manual
override operations are combinations that are readily
obtainable on the low-pressure air, high-pressure gas or
hydraulic products. This maintains product consistency
throughout any project requirement, regardless of valve
size, class, actuator supply medium, pressure, or actuator
function (DA/SR) requirements. As a result, all products can
be safely and confdently operated by personnel. In addition,
the consistent design provides a signifcant reduction in the
quantity of recommended spare parts and seal kits, which
reduces costs within maintenance programs.
Spring Cartridges for
Mechanical Fail-safe Operation
SY Series Frame
Power Cylinders for
Natural Gas Supply
Power Cylinders for
Hydraulic Supply
Power Cylinders for
Compressed Air Supply
MODULAR ASSEMBLY
GS Series Frame
Hydraulic
Override
Symmetric
Yoke
Canted
Yoke
Jackscrew Override
4
Standard Features
Scotch yoke mechanism generates powerful opening
and closing torque outputs
Steel fabricated frame provides rugged foundation
of modular assemblies
Chrome-plated side load bar with guide block for
effective elimination of piston rod defection
Bronze bushing interfaces provide low-friction support of
sliding and rotating components
Aluminum bronze sliding blocks for a low-friction,
low-stress pin connection
FRAME DESIGN
Symmetric Yoke Design
Provides conventional torque output
Equivalent break and end torque values
Canted Yoke Design
Provides unique torque output
Increases break and reseat torque values
Fabricated Frame
T
o
r
q
u
e

O
u
t
p
u
t
T
o
r
q
u
e

O
u
t
p
u
t
Valve Position Valve Position Open Open Closed Closed
Run Run
5
POWER CYLINDER AND SPRING CARTRIDGE DESIGN
ACTUATOR SERI ES
GS and SY
-22 F to 212 F
(-30 C to 100 C)
TEMPERATURE RANGE PRESSURE RANGE
40 to 3000 psig
(3 to 207 barg)
STANDARD PRODUCT CHARACTERISTICS
Power Cylinder Standard Features
Steel cylinder assemblies, each designed specifcally
for the safe pressure containment of low-pressure
compressed air, high-pressure gas or high-pressure
hydraulic supply mediums (refer to pages 8, 10, 12 and
13 for specifc pressure ratings)
Nickel-plated cylinder ID ensures excellent sealing surface
with superior corrosion resistance
Buna O-rings used for zero-leakage piston operation with
a low-pressure supply medium, while Buna Quad rings
are used with a high-pressure gas or hydraulic supply
medium
Composite guide band on piston provides low-friction
guidance and support
Spring Cartridge Standard Features
Steel spring cartridge is fully enclosed from
environmental conditions
Epoxy-coated prestressed springs provide
consistent performance with corrosion protection
Seal-welded design construction provides increased
personnel safety
Spring Cartridges for Mechanical
Fail-safe Operation
Power Cylinders for Hydraulic
and Natural Gas Supply
Power Cylinders for
Compressed Air Supply
6
Certications
Camerons LEDEEN actuators comply with many
industry standards:
ISO 9001:2008, Quality
PED 97/23/CE 2002, Quality
SI 825, 1996 Pipeline Safety
IEC 61508:2010, Integrity (TUV/SIL3)
OVERRIDE OPTIONS AND CERTIFICATIONS
Jackscrew with handwheel for operating any
double-acting or spring-return actuator up
through the SY10 model
Hydraulic pump for easy operation of all
actuator sizes and congurations
Gear with handwheel provides dual function of
valve mounting hardware with override capability
for any model double-acting or spring-return
actuator
Pneumatic Spring Return
with Jackscrew Override
Pneumatic Double Acting
with Jackscrew Override
Pneumatic Double Acting
with Hand Pump Override
7
Typical Application
Quarter-turn pneumatic actuators are used for on/off or
modulating control of any ball, plug or butterfy valve
utilizing compressed air, natural gas or nitrogen
actuator supply.
Standard Features
All models available as double acting
or spring return
Torque outputs to 5,700,000 in-lb (644,000 Nm)
Open and close travel stops, 3 degrees minimum
Local position indication
Refer to pages 5 and 6 for frame, power cylinder
and spring cartridge features
Suitable for SIL3 environments
Available Options
Jackscrew, hydraulic and gear overrides
(refer to page 7)
Mechanical partial stroke test device
(local or remote operation)
Fluorosilicone seals for low-temperature
applications: -76 F (-60 C)
Viton

seals for high-temperature

applications: 392 F (200 C)
Ultra-low temperature materials: -76 F (-60 C)
Refer to page 18 for pneumatic control option
QUARTER-TURN PNEUMATIC
ACTUATOR MODELS
GS and SY
-22 F to 212 F
(-30 C to 100 C)
TEMPERATURE RANGE PRESSURE RANGE
40 to 175 psig
(3 to 12 barg)
STANDARD PRODUCT CHARACTERISTICS
Quarter-turn Pneumatic
Pneumatic Spring Return
8
Core Product Types
Typical Application
Quarter-turn pneumatic actuators are used for on/off or
modulating control of any ball, plug or butterfy valve utilizing
compressed air, natural gas or nitrogen actuator supply.
Standard Features
Available as double acting or spring return
Torque outputs to 9700 in-lb (1100 Nm)
Forged steel body, piston and end caps
Steel cylinders with nickel-plated I.D.
Symmetric yoke
Aluminum bronze sliding blocks in yoke
Composite guide sleeve on piston
Open and close travel stops, 3 degrees minimum
Local position indication
Suitable for SIL3 environments
Refer to page 20 for pneumatic control option
Available Options
Stainless steel cylinders
Fluorosilicone seals for low-temperature
applications: -76 F (-60 C)
Viton seals for high-temperature applications:
392 F (200 C)
Jackscrew with handwheel for operating any double-acting
or spring-return model
Gear with handwheel provides dual function of valve
mounting hardware with override capability for any
double-acting or spring-return model
QUARTER-TURN PNEUMATIC (VA SERIES)
ACTUATOR MODEL
VA
-22 F to 212 F
(-30 C to 100 C)
TEMPERATURE RANGE PRESSURE RANGE
40 to 174 psig
(3 to 12 barg)
STANDARD PRODUCT CHARACTERISTICS
9
Typical Application
Quarter-turn hydraulic actuators are used for on/off or
modulating control of any ball, plug or butterfy valve
utilizing hydraulic actuator supply.
Standard Features
All models available as double acting or
spring return
Torque outputs to 5,700,000 in-lb (644,000 Nm)
Open and close travel stops, 3 degrees minimum
Local position indication
Refer to pages 5 and 6 for frame, power cylinder
and spring cartridge features
Suitable for SIL3 environments
Refer to pages 19 and 20 for hydraulic
control options
Available Options
Jackscrew, hydraulic and gear overrides (refer to
page 7)
Mechanical partial stroke test device (local or
remote operation)
Fluorosilicone seals for low-temperature applications:
-76 F (-60 C)
Viton seals for high-temperature applications:
392 F (200 C)
Ultra-low temperature materials: -76 F (-60 C)
QUARTER-TURN HYDRAULIC
ACTUATOR SERI ES
GS and SY
-22 F to 212 F
(-30 C to 100 C)
TEMPERATURE RANGE PRESSURE RANGE
145 to 3000 psig
(10 to 207 barg)
STANDARD PRODUCT CHARACTERISTICS
10
ACTUATOR MODEL
Deepwater Series
PRESSURE RANGE
150 to 3000 psig
(10 to 207 barg)
STANDARD PRODUCT CHARACTERISTICS
QUARTER-TURN HYDRAULIC SUBSEA
Typical Application
For on/off control of any subsea ball, plug or check valve in a
submerged environment beyond 500 ft (152 m) water depth.
Standard Features
Available as double acting or spring return
Torque outputs to 3,600,000 in-lb (400,000 Nm)
Scotch yoke mechanism
Pressure-compensated for deep applications
100% RX and PT tested welds
No external tie rods
Open and close travel stops, 5 degrees minimum
Local tactile position indicator
Spool piece with adjustable position locators
Available Options
Manual override
ROV override
Microswitch for open/close indication
Position transmitter for 0% to 100% travel indication
SUBMERSI ON ( WATER DEPTH)
> 500 ft (152 m)
Shallow-water Series 500 ft (152 m)
Typical Application
For on/off control of any quarter-turn operated valve in a
submerged environment to 500 ft (152 m) water depth.
Standard Features and Benets
Available as double acting or spring return
Torque output to 5,700,000 in-lb (644,000 Nm)
Open and close travel stops provide 3 degrees minimum
Scotch yoke mechanism
Buna piston seal
Composite guide band on piston
Epoxy-coated springs
Pressure compensator
Available Options
Manual override
ROV override
Microswitch for open/close indication
Position transmitter for 0% to 100% travel indication
11
Typical Application
Quarter-turn gas-over-oil actuators are used for on/off
control of any natural gas transmission ball or plug valve
utilizing a high-pressure natural gas or nitrogen actuator
supply.
Standard Features
All models available as double acting
Torque outputs to 5,700,000 in-lb (644,000 Nm)
Open and close travel stops, 3 degrees minimum
Local position indication
ASME/ PED gas-over-oil pressure vessels with dipstick,
flter and adjustable speed controls
High-pressure rated controls for local, remote and
automatic operation (refer to pages 21 and 22)
Hydraulic manual override
Refer to pages 5 and 6 for frame and power
cylinder features
Suitable for SIL3 environments
Available Options
Fluorosilicone seals for low-temperature applications:
-76 F (-60 C)
Viton seals for high-temperature applications:
392 F (200 C)
Ultra-low temperature materials: -76 F (-60 C)
ASME/ PED emergency storage tank
QUARTER-TURN GAS-OVER-OIL
ACTUATOR SERI ES
GS and SY
-22 F to 212 F
(-30 C to 100 C)
TEMPERATURE RANGE PRESSURE RANGE
145 to 1500 psig
(10 to 104 barg)
STANDARD PRODUCT CHARACTERISTICS
12
Typical Application
Quarter-turn direct gas actuators are used for on/off control
of any natural gas transmission ball or plug valve utilizing a
high-pressure natural gas or nitrogen actuator supply.
Standard Features
All models available as double acting
Torque outputs to 5,700,000 in-lb (644,000 Nm)
Open and close travel stops, 3 degrees minimum
Local position indication
Hydraulic manual override with reservoir flter,
dipstick and adjustable speed controls
High-pressure rated controls for local, remote and
automatic operation (refer to pages 21 and 22)
Refer to pages 5 and 6 for frame and power
cylinder features
Suitable for SIL3 environments
Available Options
Fluorosilicone seals for low-temperature applications:
-76 F (-60 C)
Viton seals for high-temperature applications:
392 F (200 C)
Ultra-low temperature materials: -76 F (-60 C)
ASME/ PED emergency storage tank
Spring-return models
QUARTER-TURN DIRECT GAS
ACTUATOR MODELS
GS and SY
-22 F to 212 F
(-30 C to 100 C)
TEMPERATURE RANGE PRESSURE RANGE
145 to 1500 psig
(10 to 104 barg)
STANDARD PRODUCT CHARACTERISTICS
13
Typical Application
Linear pneumatic actuators are used for on/off or
modulating control of any gate valve or rising stem ball
valve utilizing compressed air, natural gas or nitrogen
actuator supply.
Piston Actuator Standard Features
All models available as double acting or spring return
Thrust outputs to 4,400,000 lb (19,572,000 N)
Local position indication
Refer to page 6 for power cylinder and spring
cartridge features
Suitable for SIL3 environments
Refer to page 18 for pneumatic control option
Available Options
Mechanical jackscrew override
Hydraulic manual override
Fluorosilicone seals for low-temperature applications:
-76 F (-60 C)
Viton seals for high-temperature applications:
392 F (200 C)
Ultra-low temperature materials: -76 F (-60 C)
LINEAR PNEUMATIC
ACTUATOR MODEL
LP
-22 F to 212 F
(-30 C to 100 C)
TEMPERATURE RANGE PRESSURE RANGE
40 to 175 psig
(3 to 12 barg)
STANDARD PRODUCT CHARACTERISTICS
14
Linear Core Product Types
Typical Application
Linear pneumatic actuators are used for on/off or modulating
control of any gate valve or rising stem ball valve utilizing a
hydraulic actuator supply.
Standard Features
All models available as double acting or spring return
Thrust outputs to 4,400,000 lb (19,500,000 N)
Local position indication
Refer to page 6 for power cylinder and spring
cartridge features
Suitable for SIL3 environments
Refer to pages 19 and 20 for hydraulic control options
Available Options
Mechanical jackscrew override
Hydraulic manual override
Fluorosilicone seals for low-temperature applications:
-76 F (-60 C)
Viton seals for high-temperature applications:
392 F (200 C)
Operating pressure to 5000 psig (345 barg)
Ultra-low temperature materials: -76 F (-60 C)
LINEAR HYDRAULIC
ACTUATOR MODEL
LH
-22 F to 212 F
(-30 C to 100 C)
TEMPERATURE RANGE PRESSURE RANGE
145 to 3000 psig
(10 to 207 barg)
STANDARD PRODUCT CHARACTERISTICS
15
Typical Application
Linear gas-over-oil actuators are used for on/off control
of any natural gas transmission gate valve utilizing a
high-pressure natural gas or nitrogen actuator supply.
Piston Actuator Standard Features
Available as double acting
Thrust outputs to 4,400,000 lb (19,572,000 N)
Local position indication
ASME/PED gas-over-oil pressure vessels with dipstick,
flter and adjustable speed controls
High-pressure rated controls for local, remote
and automatic operation (refer to pages 21 and 22)
Hydraulic manual override
Refer to page 6 for power cylinder features
Suitable for SIL3 environments
Available Options
Fluorosilicone seals for low-temperature
applications: -76 F (-60 C)
Viton seals for high-temperature applications:
392 F (200 C)
Ultra-low temperature materials: -76 F (-60 C)
ASME/PED emergency storage tank
LINEAR GAS-OVER-OIL
ACTUATOR MODEL
LH-GH
-22 F to 212 F
(-30 C to 100 C)
TEMPERATURE RANGE PRESSURE RANGE
145 to 1500 psig
(10 to 104 barg)
STANDARD PRODUCT CHARACTERISTICS
16
Typical Application
Linear subsea actuators are used for on/off control of any
subsea gate valve utilizing a hydraulic actuator supply.
Standard Features
Available as double acting or spring return
Thrust outputs to 4,400,000 lb (19,500,000 N)
Pressure-compensated for deep applications
100% RX and PT tested welds
No external tie rods or tubing
Available Options
ROV override
Diver intervention
In-house hyperbaric testing
LINEAR SUBSEA
Adapter Piece
Hydraulic Cylinder
ACTUATOR MODEL PRESSURE RANGE
Mytilus
150 to 3000 psig
(10 to 207 barg)
STANDARD PRODUCT CHARACTERISTICS
17
Typical Application
Low-pressure pneumatic controls are used for local, remote or
automatic control of any low-pressure pneumatic actuator.
Standard Features
Compact manifold design
316 stainless steel construction
High fow capacity
Accepts multiple solenoid brands
Approved to NEMA and ATEX standards
Control double-acting and spring-return actuators
Adaptable for custom applications
FKM fuorocarbon Viton seals
Suitable for SIL3 environments
Available Options
Pilot or electrical control signal
ASCO, Midland or Versa solenoid
Lever or palm button manual operator
Latching detent and manual reset devices
Low power consumption
EPDM seals for low-temperature applications
LOW-PRESSURE PNEUMATIC
AUX PORT
CYLINDER
PORTS
LEGEND:
Electric
Pneumatic
Lockable stop valve
Check valve
Filter
Pressure regulator
Pressure gauge
Junction box
Solenoid valve
Pneumatic piloted valve
Flow control valve
8
9A
9B
9B 9A
8
7
6
5
4
3
2
1
1 2 3 4
5
6
7
CONTROL MODELS
Local, Remote
and Automatic
PRESSURE RANGE
0 to 175 psig
(0 to 12 barg)
-40 F to 200 F
(-40 C to 93 C)
TEMPERATURE RANGE
STANDARD PRODUCT CHARACTERISTICS
18
Controls and Accessories
Typical Application
Hydraulic self-contained controls are used for providing a
reliable valve shutdown capability when an external power
source for the actuator is either not available or
not dependable.
Standard Features
Models available with 3000 psig and 5000 psig
pressure outputs
Corrosion-resistant anodized aluminum with stainless
steel internals
Manual arming valve with bright red colored local
emergency shutdown trip function
Thermal compensation for high- and low-pressure circuits
Independently adjustable pilot valves for PSH and PSL
Stainless steel pressure gauges for high- and low-pressure
circuits
Easy-view liquid level gauge attached to stainless
steel reservoir
Available Options
Low power consumption solenoid for remote trip
Lockable stainless steel enclosure
Fusible plug
HYDRAULIC SELF-CONTAINED
CONTROL MODELS
Self-contained
PRESSURE RANGE
3000 psig and 5000 psig
(207 barg and 345 barg)
-50 F to 212 F
(-45 C to 100 C)
TEMPERATURE RANGE
STANDARD PRODUCT CHARACTERISTICS
Typical Self-contained Assembly
19
Typical Application
The hydraulic power unit provides a reliable high-pressure
hydraulic output as a power source for hydraulic actuators.
Electric Motor Operated
Available for mounting on the actuator or remotely
Centralized
Provides power for a large quantity of actuators
simultaneously
Hydraulic controls for all actuators are centralized
Portable Gasoline or Diesel Operated
Mobile power source for individual actuator
requirements
Flexible hoses with quick disconnects
Solar Operated
Available for single or multiactuator requirements
Completely self-contained
Emergency storage capability
POWER UNI TS
Electric, Gasoline,
Diesel or Solar
-40 F to 212 F
(-40 C to 100 C)
TEMPERATURE RANGE PRESSURE RANGE
145 to 3000 psig
(10 to 207 barg)
HYDRAULIC POWER UNIT
20
Typical Application
High-pressure gas controls are used for local, remote or
automatic control of any high-pressure gas actuator utilizing
a natural gas or nitrogen supply.
Standard Features
Compact design with weatherproof enclosure
All components have high-pressure rating
Three-stage gas flter /conditioner
Easy operation of manual levers throughout
pressure range
Durable marine grade materials
Converts from local to remote or automatic operation
Available Options
Electric remote
Electric fail-safe
Emergency shutdown
High/ low-pressure shutdown
Linebreak (diaphragm, digital or electronic)
Station bypass
Various confgurations or special requirements
HIGH-PRESSURE GAS
CONTROL MODELS
Local, Remote
and Automatic
-76 F to 212 F
(-60 C to 100 C)
TEMPERATURE RANGE PRESSURE RANGE
145 to 1500 psig
(10 to 104 barg)
STANDARD PRODUCT CHARACTERISTICS
21
Typical Application
Electronic linebreak controls are used for monitoring pipeline
operating conditions to quickly detect pressure trending
toward abnormally high or low rate-of-drop
values and accurately monitor those trends for an
automatic shutdown response when pre-established set
points are reached.
Standard Features
Continuous pipeline pressure monitoring and data
acquisition
Initiates valve closure when PSH, PSL or ROD limits are
reached
CSA certifed for Class 1, Div. 2 hazardous locations
Weather-tight NEMA 4 enclosure supports integral
battery
Enclosure allows mounting of single- or dual-pressure
transmitters
User-assignable data for local display on large-character
LCD screen
RS 232 and RS 485 communication connections
Available Options
Solar powered (panel with all associated circuit
accessories)
Dual-pressure transmitters for redundancy or dP
monitoring
Expansion board for additional I/O connections
ELECTRONIC LINEBREAK
CONTROL MODELS
SafeMaster
-40 F to 140 F
(-40 C to 60 C)
TEMPERATURE RANGE PRESSURE RANGE
Pressure transmitter
dependent
STANDARD PRODUCT CHARACTERISTICS
Line Monitor Screen Display
22
Typical Application
Position-monitoring switches are used for remote indication
of any rotary requirements; primarily for quarter-turn
valve actuators.
Standard Features
Zytel

, aluminum or 316 SS enclosures

Ingress protection rated IP67
Explosion-proof rated Exd IIc T6 IP67
Approved to ATEX and CENELEC standards
12-contact terminal strip
High-visibility dome indicator
SPDT mechanical switches
NPT or metric cable entries
Namur mounting
Easy-to-set colored cams
Available Options
Ingress protection rated IP68
DPDT mechanical switches
Proximity switches
Position transmitter
POSITION-MONITORING SWITCHES
SWI TCH MODEL
PMS
-67 F to 185 F
(-55 C to 85 C)
TEMPERATURE RANGE I NDI CATOR COLORS
Red/ Yellow
Red/Green
PMS 100
PMS 300
PMS 500
STANDARD PRODUCT CHARACTERISTICS
23
As established leaders in actuation technology, Camerons
LEDEEN brand offers a complete line of actuation and
control solutions across a range of fow control applications.
Through technological advancements, LEDEEN actuators
deliver a range of capabilities, power and performance in
both quarter-turn and linear confgurations.
For local, remote or automatic operation, our LEDEEN line
features innovative products with intelligent actuation
technology designed for some of the worlds most
demanding applications.
Specialized Equipment
To verify performance in actual subsea working
conditions, LEDEEN actuators go through stringent
hyperbaric testing procedures in stimulated environments
to ensure all products meet and exceed industry
standards
Cameron has the capability to validate LEDEEN actuator
torque output to 13,300,000 in-lb (1,500,000 Nm)
Technology and Quality
Although checked for accuracy at the time of printing, Camerons commitment of continuous improvement and innovation may have resulted in product enhancements or modications not currently shown.
24
25
Startup and Commissioning
Our experts understand that each project is unique. Thats why Camerons CAMSERV

Services help facilitate commissioning and startup activities.
Integrated solutions, onsite or at our global service centers
Increased equipment and product performance
The shortest possible trouble-free startup for your critical assets
Spare Parts and Asset Management
Cameron offers the assets and expertise to cover all aspects of valve management.
Full inventory of quality exact OEM parts and spares
Complete asset risk and criticality assessments
Comprehensive inventory of your assets, including a complete recommended
spare valves and parts list
Operational Support
Camerons ability to address valve requirements in the feld is a refection of our
commitment to life-of-asset support.
Innovative asset management solutions
Trouble-free installation, startup and operations
Support from commission to operation extending through all
phases of a valves life cycle
Extensive inventory of spare valves and parts
Camerons CAMSERV site
management mitigates the risk
of project delays by identifying
issues in the construction
process prior to valve installation
to ensure valve integrity.
CAMSERV Services for Actuation and Valves
WE BUILD IT. WE BACK IT.
2012 Cameron | LEDEEN is a registered trademark of Cameron. CAMSERV is a trademark of Cameron. Total Valve Care is a service mark of Cameron.
Viton and Zytel are registered trademarks of E.I. DuPont De Nemours & Company | SWP 2M 12/13 AD00267V
3250 Briarpark Drive, Suite 300
Houston, TX 77042
USA
Toll Free 1.800.323.9160
Via Gandini 4
27058 Voghera, PV
Italy
Tel 39.0383.343311
Visit us at www.c-a-m.com/LEDEEN
H
E
A
L
T
H

S
A
F
E
T
Y

A
N
D
E
NVIRON
M
E
N
T
A
L

E
X
C
E
L
L
E
N
C
E
C
A
MERO
N
HSE Policy Statement
At Cameron, we are committed ethically, financially and personally to a
working environment where no one gets hurt and nothing gets harmed.