This document provides a user manual for a 2.4GHz wireless trackball keyboard (FK-760). It includes specifications for the keyboard, trackball, and USB dongle dimensions. It also provides instructions for installing and setting up the keyboard by inserting batteries, plugging in the USB receiver, and setting the ID. The manual describes the keyboard functions and keys, and provides troubleshooting tips and notices about FCC compliance.
This document provides a user manual for a 2.4GHz wireless trackball keyboard (FK-760). It includes specifications for the keyboard, trackball, and USB dongle dimensions. It also provides instructions for installing and setting up the keyboard by inserting batteries, plugging in the USB receiver, and setting the ID. The manual describes the keyboard functions and keys, and provides troubleshooting tips and notices about FCC compliance.
This document provides a user manual for a 2.4GHz wireless trackball keyboard (FK-760). It includes specifications for the keyboard, trackball, and USB dongle dimensions. It also provides instructions for installing and setting up the keyboard by inserting batteries, plugging in the USB receiver, and setting the ID. The manual describes the keyboard functions and keys, and provides troubleshooting tips and notices about FCC compliance.
This document provides a user manual for a 2.4GHz wireless trackball keyboard (FK-760). It includes specifications for the keyboard, trackball, and USB dongle dimensions. It also provides instructions for installing and setting up the keyboard by inserting batteries, plugging in the USB receiver, and setting the ID. The manual describes the keyboard functions and keys, and provides troubleshooting tips and notices about FCC compliance.
KEYBOARD USER MANUAL FK-760 2.4GHz wireless Trackball keyboard Windows CERTIFIEDFOR TM TM Vista Compatible with Windows 2000 / Windows XP / Windows Vista / Windows 7 O ompl i ant S RoH O ompl i ant S RoH (FN+) Introduction 2.4GHz RF is the best wireless input device nowadays and FK-760 this model is designed by this technology. Not only performing as keyboard input device, it combines TRACKBALL with two mouse buttons and scroll wheel. FK-760 this model is ergonomically designed for comfortable use on desktop or laps as there is no any wire required for connection. Surely, you will obtain high level of computing enjoyment via this product; now lets get it started! Specification: Dimensions: Keyboard: 380 x 180 x 46 mm (W/D/H) USB dongle: 21.5 x 78 x 10mm(W/D/H) Trackball : 25mm Full box: 405 x 224 x51 mm(W/D/H) Keyboard: 2.4GHz RF connection with 8 available channels with USB receiver. AA size battery x 4 (alkaline only). 360 navigation, effective working range up to 10 meters. 88/89 standard keys +12 Internet/Multimedia keys. 3 mouse buttons & scroll wheel. Switch life of keys: over 10 million times. Compatible with Windows 2000 / Windows XP / Windows VISTA and Windows 7. Trackball: Standard 25mm optical trackball. 800 DPI 1 2 Installation 1. Open up the cover under the keyboard and insert AA alkaline battery x 4 into the chamber (please equip correctly according to polarity), then close the cover. 2. Plug the USB receiver into the USB port of your computer 3. Turn on the computer. 4. ID Setting: a. Press the ID button on the USB receiver (Figure 1), the device is searching for ID when the LED is blinking.. b. Check the printing under ID key , Printed ID only: push the key of ID and release. Printed (Fn+) ID : Keep the key of Fn pressed and then push the key of ID in 2 seconds, then release these two keys c. Check the LED status on the USB receiver; The setting is done successfully when the LED on the USB receiver stops flashing. Figure A Figure B LED ID button (FN+) 3 1. Media hotkeys only can be used after the program of Media Center is activated. 2. Table of Functional Keys: Fn +Prtsc SysRq =PrtscSysRq Fn +Scroll Lock =Scroll Lock Fn +Pause Break =Pause Break Fn +Num Lock =Num Lock Notice: Key Description Left Key Right Key Mouse keys 4 Notice: 1. The LED on the USB receiver always blinks whenever this keyboard is being operated. 2. Please replace batteries when the battery low LED is in red blinks. 3. If the default of Num Lock in Windows is on; please press the keys of Fn + Num Lock if you want to disable it. If this default of Num Lock does not meet your preference exactly, it is recommended to check or change relevant setting in Registry Editor of your computer. 4. Trouble Shooting: If your keyboard cannot work properly after installation, please check followings for troubleshooting. a. Make sure that the USB receiver is correctly plugged into computers USB port. b. Make sure AA batteries x 4 are equipped correctly, especially polarity (+), (-). c. Be sure that the distance between your wireless keyboard and its USB receiver is within 10 meters and there shall not have interference against other peripherals. d. Interference would possibly occur if there are two more units used in the same place; it is required to reset the ID when interference occurs. Please refer the paragraph of ID Setting . Battery Low LED FCC Information: The Federal Communication Commission Radio Frequency Interference Statement includes the following paragraph: The equipment has been tested and found to comply with the limits for a Class B Digital Device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction, may cause harmful interference to radio communication. However, there is no grantee that interference will not occur in a particular installation. If this equipment dose cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. 5 Production Notice: 1. The Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. 2. Modification could void authority to use this equipment. 3. To comply with the FCC RF exposure compliance requirements, no change to the antenna or the device is permitted. Any change to the antenna or the device could result in the device exceeding the RF exposure requirements and void users authority to operate the device. 4. WEEE Directive & Product Disposal: 4.1. At the end of its serviceable life, this product should not be treated as household or general waste. It should be handed over to the applicable collection point for the recycling of electrical and electronic equipment, or returned to the supplier for disposal. 4.2. Internal / Supplied Batteries This symbol on the battery indicates that the battery is to be collected separately. This battery is designed for separate collection at an appropriate collection point. All trademarks and registered trademarks are the property of their respective owners. 6