Scribd Logo
Upload

Welcome to Scribd!

  • 248 views

    Wind-Dependent Fountain Control and Anemometer

    Uploaded by

    rkss
    This document discusses a wind-dependent fountain control system that reduces fountain height or shuts off the fountain system completely depending on wind speed. The system includes a wind-dependent controller and anemometer that monitors wind conditions. It switches off fountain pumps in stages as wind speed increases to prevent surrounding areas from getting wet and save on water and power costs during stormy weather.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Wind-Dependent Fountain Control and Anemometer

    Uploaded by

    rkss
    248 views2 pages
    This document discusses a wind-dependent fountain control system that reduces fountain height or shuts off the fountain system completely depending on wind speed. The system includes a wind-dependent controller and anemometer that monitors wind conditions. It switches off fountain pumps in stages as wind speed increases to prevent surrounding areas from getting wet and save on water and power costs during stormy weather.

    Original Description:

    fountain control items during wind

    Original Title

    Wind-dependent fountain control and Anemometer

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document discusses a wind-dependent fountain control system that reduces fountain height or shuts off the fountain system completely depending on wind speed. The system includes a wind-dependent controller and anemometer that monitors wind conditions. It switches off fountain pumps in stages as wind speed increases to prevent surrounding areas from getting wet and save on water and power costs during stormy weather.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    248 views2 pages

    Wind-Dependent Fountain Control and Anemometer

    Uploaded by

    rkss
    This document discusses a wind-dependent fountain control system that reduces fountain height or shuts off the fountain system completely depending on wind speed. The system includes a wind-dependent controller and anemometer that monitors wind conditions. It switches off fountain pumps in stages as wind speed increases to prevent surrounding areas from getting wet and save on water and power costs during stormy weather.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    During stormy weather, fountains often have

    an inharmonious effect and normal fountain


    operation will get the surrounding area wet.
    Wind-level fountain controls can reduce the
    fountain height, or completely switch the sys-
    tem off, depending on wind speed.
    Wi nd- dependent fountai n control
    and Anemometer
    Product characteristics at a glance
    Wind-dependent switch-off in 3 stages
    Saves water and power costs
    Weather-dependent harmonious water pattern
    No irritated pedestrians
    Wind-dependent fountain control 3K Anemometer
    220-240 V 400 V 110-120 V 50 Hz 60 Hz 12 V AC 24 V DC
    Wind-dependent fountain control
    Anemometer
    170 OASE Fountain Technology / Lake Management Catalogue
    P
    o
    w
    e
    r
    W
    i
    n
    d

    l
    e
    v
    e
    l

    f
    o
    u
    n
    t
    a
    i
    n

    c
    o
    n
    t
    r
    o
    l
    l
    e
    r
    FONTIMAT, S.A. C/Polea, 1-3 28529 Rivas Vaciamadrid - Madrid Tfno. 916665440 [email protected]

    Dimensions (L xW xH) [mm]
    Housing
    Protection class
    Voltage [V / Hz]
    Switch/button
    Indicator light
    Control lines
    Contact load [A]
    Weight [kg]
    Order no.
    Wind-dependent fountain control 3K
    180 x 180 x 124
    plastic
    IP 54
    230 / 50
    5
    1
    3
    5
    2.2
    51838
    Anemometer K
    145 x 104 x 93
    plastic
    IP 54
    24 V / DC

    0.8
    53913
    The Wind-dependent fountain control 3K control
    device directly switches off the pump at a certain
    preset wind level. If multiple pumps are operated
    that feed one fountain, they can be switched off one
    after the other. Or two bypass valves are opened
    depending on the wind and the pump is switched off
    only in the third step.
    The control device is usually placed next to the
    control cabinet of the fountain system. The control
    cables of the pumps are routed out of the control
    cabinet and connected. Wind conditions on the ane-
    mometer and on the fountains should be identical if
    possible, consequently the anemometer should be
    slightly elevated and mounted on a mast or a roof in
    the vicinity of the fountain. The pulse lines of the
    anemometer should be shielded and routed to the
    control device via the shortest path possible.
    (Maximum possible cable length is 250 m)
    Possible fountain heights in %
    Wind forces from 0 6 according to the Beaufort wind force scale
    WFA 51838
    Cable: starting from 20m cable length, please use screened cable
    171 OASE Fountain Technology / Lake Management Catalogue
    P
    o
    w
    e
    r
    W
    i
    n
    d

    l
    e
    v
    e
    l

    f
    o
    u
    n
    t
    a
    i
    n

    c
    o
    n
    t
    r
    o
    l
    l
    e
    r
    FONTIMAT, S.A. C/Polea, 1-3 28529 Rivas Vaciamadrid - Madrid Tfno. 916665440 [email protected]

    You might also like