This document is a notice inviting tender for the supply of 6 Nos. of 5 Ton Semi Gantry Cranes with a span of 14 M. It provides important details about the tender such as the enquiry number, date, and due date for submission. The document outlines the qualifying criteria for bidders which includes having previously supplied a 5 Ton or higher capacity gantry crane with a minimum 10 M span. It also includes sections providing technical specifications and requirements for the cranes and details required from bidders regarding their experience and capabilities. Bidders are requested to provide all relevant information and submit technical and commercial bids separately before the due date.
This document is a notice inviting tender for the supply of 6 Nos. of 5 Ton Semi Gantry Cranes with a span of 14 M. It provides important details about the tender such as the enquiry number, date, and due date for submission. The document outlines the qualifying criteria for bidders which includes having previously supplied a 5 Ton or higher capacity gantry crane with a minimum 10 M span. It also includes sections providing technical specifications and requirements for the cranes and details required from bidders regarding their experience and capabilities. Bidders are requested to provide all relevant information and submit technical and commercial bids separately before the due date.
This document is a notice inviting tender for the supply of 6 Nos. of 5 Ton Semi Gantry Cranes with a span of 14 M. It provides important details about the tender such as the enquiry number, date, and due date for submission. The document outlines the qualifying criteria for bidders which includes having previously supplied a 5 Ton or higher capacity gantry crane with a minimum 10 M span. It also includes sections providing technical specifications and requirements for the cranes and details required from bidders regarding their experience and capabilities. Bidders are requested to provide all relevant information and submit technical and commercial bids separately before the due date.
This document is a notice inviting tender for the supply of 6 Nos. of 5 Ton Semi Gantry Cranes with a span of 14 M. It provides important details about the tender such as the enquiry number, date, and due date for submission. The document outlines the qualifying criteria for bidders which includes having previously supplied a 5 Ton or higher capacity gantry crane with a minimum 10 M span. It also includes sections providing technical specifications and requirements for the cranes and details required from bidders regarding their experience and capabilities. Bidders are requested to provide all relevant information and submit technical and commercial bids separately before the due date.
05.11.2009 You are requested to quote the Enquiry number date and due date in all your correspondence. This is only a request for quotation and not an order. Please note that under any circumstances both delayed offer and late offers will not be considered. Hence vendors are requested to ensure that the offer is reaching physically our office before 14.00 hrs on the Date of tender opening.
Item Description Quantity 10 5 Ton Semi Gantry Crane Span 14 M as per the technical specification, general guidelines instructions & commercial conditions applicable (to be downloaded from web site www.bhel.com or http://tenders.gov.in) 6 Nos Important points to be taken care during submission of offer
1. Delivery required 10 months from the date of purchase order. 2. Grace period of 2 months beyond the above delivery period will be considered. 3. Checklist to be filled and enclosed along with the offer failing which, the offer will not be considered for evaluation. 4. Vendors are requested to submit their price bids along with technical bid individually for all the four sizes (Span x Lift x CT) indicated in Part B Technical Specifications. 5. The Quantity of Tender is Firm. (i.e., 6 Nos.) However the size wise quantity may vary according to final requirement. This confirmed size wise (Span x Lift) quantity will be communicated to vendors before Price Bid opening / Conduct of Reverse Auction.
BHELs General guidelines / instructions (refer MM/CE/GT/001) including bank guarantee formats and list of consortium banks, commercial terms check-list can be downloaded from BHEL web site http://www.bhel.com or from the Government tender website http://tenders.gov.in (public sector units > Bharat Heavy Electricals Limited page) under Enquiry reference 2620900212 . Tenders should reach us before 14:00 hours on the due date Tenders will be opened at 14:30 hours on the due date Tenders would be opened in presence of the tenderers who have submitted their offers and who may like to be present Yours faithfully, For BHARAT HEAVY ELECTRICALS LIMITED
Sr.Manager / MM / Capital Equipment
CABS-3-60N-5T Semi Gantry Spec. PART-A R . F . P S . A R . R S . N A . V S . M P a g e | 1 of 4
PART A
SECTION-I: -QUALIFING CRITERIA
The BIDDER/VENDOR (OEM) has to compulsorily meet the following requirements to get qualified for consideration of the technical offer for the SUPPLY OF SEMI GANTRY CRANE S. No. PARTICULARS VENDORS RESPONSE 1.0 Only those Bidder/vendor (OEM), who have supplied and commissioned at least ONE 5Ton capacity Gantry or Semi Gantry crane, class-3 with minimum span of 10 Mtr or higher and should have supplied frequency converter drive for similar capacity crane in the past five years and such crane is presently working satisfactorily for more than one year after commissioning (on the date of opening of Tender), should quote. However, if such crane has been supplied to BHEL, then it should be presently working satisfactorily for more than six months after its commissioning and acceptance (on the date of opening of Tender) in BHEL. Performance certificate from the customers (minimum 2) regarding satisfactory performance of machine supplied to them in attached format should be enclosed along with technical offer.
2.0 BHEL reserves the right to verify the information provided by vendor. In case the information provided by vendor is found to be false/ incorrect, the offer shall be rejected.
3.0 The bidding FIRM should have in-house or self- owned facility for FABRICATION and TESTING at 125 % of the rated capacity
4.0 The vendor should have minimum 10 years experience in design, fabrication and supply of cranes.
5.0 DELI VERY - The bidder shall quote the best possible delivery. However the delivery shall not exceed 10 months with an additional grace period of 2 months. The additional grace period will attract a penalty which is explained in the commercial terms of the enquiry. The delivery period shall be reckoned from date of purchase order to despatch from the vendor works.
CABS-3-60N-5T Semi Gantry Spec. PART-A R . F . P S . A R . R S . N A . V S . M P a g e | 2 of 4
SECTION II
The vendors are requested to provide the following details
S. No. PARTICULARS VENDORS RESPONSE 6.0 Number of Years of Experience of the BIDDER/ VENDOR (OEM) in the field of design, manufacture, supply, erection & commissioning of cranes
7.0 Number of cranes supplied, installed and commissioned till date
8.0 Number of cranes supplied, installed and commissioned till date in the QUOTED MODEL
9.0 Number of cranes supplied, installed and commissioned till date for the following category of CUSTOMERS a) Power Utility Boiler Manufacturer b) Equipment Supplier for Process Industries [Heavy Engineering Companies] c) Research Establishments
10.0 Details on SERVICE-AFTER-SALES Set-Up in India including the Addresses of Agents / Service Centre in India and Asia
11.0 Any Additional Data to supplement the manufacturing capability of the BIDDER for the subject equipment.
CABS-3-60N-5T Semi Gantry Spec. PART-A R . F . P S . A R . R S . N A . V S . M P a g e | 3 of 4
SECTION III Bidder / Vendor (OEM) to note the following S.No. REQUIREMENTS VENDORS RESPONSE 12.0 The BIDDER / VENDOR shall submit the offer in TWO PARTS - Technical [with PART A & PART B] & Commercial and Price Bid.
13.0 The Offer shall contain a comparative statement of Technical Specifications given by BHEL and the Offer Details submitted by the Bidder, against each clause. Where details are required, a mere CONFIRMED or COMPLIES or YES or NO-DEVIATION or similar words in the technical comparative statement may lead to disqualification of the Technical Offer.
14.0 The Technical Offer shall be supported by Product Catalogue and Data Sheets in ORIGINAL and complete technical details of Bought-Out-Items with copies of Product Catalogue and Selection Criteria
15.0 The Commercial Offer (given with the Technical Offer) shall contain the Scope of Supply and the Un-Priced Part of the Price-Bid, for confirmation
16.0 BIDDER has to indicate the Country of Origin for the supply of equipment.
CABS-3-60N-5T Semi Gantry Spec. PART-A R . F . P S . A R . R S . N A . V S . M P a g e | 4 of 4
PERFORMANCE CERTIFICATE (On Customers Letter Head)
1. Supplier of the Equipment :
2. Make & Model of the Equipment :
3. Month & Year of Commissioning :
4. Application :
5. a) Crane Type:
b) Crane Capacity (Metric Tonnes):
c) Crane span :
d) Mechanism class :
6. Performance of the Equipment : Satisfactory / (Strike off whichever is not applicable) Good / Average / Not Satisfactory
7. Any other remarks:
Date: Signature & Seal of the Authority Issuing the Performance Certificate
CABS-3-60N-5 T Semi Gantry Crane- Part-B
R . F . P S. A R . R S. N A . V S. M 1 | P age11 PART B.
TECHNICAL SPECIFICATIONS FOR 5 T SEMI GANTRY CRANES WITH DOUBLE GIRDERS
S.No. PARTICULARS BHEL SPECIFICATIONS VENDORs OFFER 1.0.0 APPLICATION a. The subject crane is meant for the purpose of handling small to medium (within the lifting capacity of the crane) components, in a heavy and large steel fabrication shop floor. b. The crane will be put to use for continuous duty with CT, LT and Hoist movements, which may occur simultaneously (within the operating parameters specified under Clause Nos. 3.1.0, 3.4.0 and 3.5.0). c. The shop floor environment will be dust prone, humid, welding fume filled and ambient temperature going up to 45 C , due to pre-heating of jobs.
2.0.0 SCOPE OF SUPPLY a. Design as per Tender Specifications b. Detailed Design, Manufacture, Assembly and Testing before Despatch c. Supply in Modules / Sub-Assemblies d. Commissioning and Performance Prove-Out at BHEL Works e. Performance Guarantee for 12 months, from the date of commissioning.
3.0.0 TECHNICAL SPECIFICATIONS 3.1.0 CAPACITY Lifting Capacity 3.1.1 Main Hoist 5 Metric Tonnes 3.1.2 Auxiliary Hoist NO AUX HOIST CABS-3-60N-5 T Semi Gantry Crane- Part-B
R . F . P S. A R . R S. N A . V S. M 2 | P age11
S.No. PARTICULARS BHEL SPECIFICATIONS VENDORs OFFER 3.2.0 SPAN Wheel Centre to Wheel Centre Dimensions 3.2.1 Long Travel (LT) & Height of Lift 1. 14000mm / 5600mm 2. 14000mm / 3500mm 3. 11000mm / 5600mm 4. 11000mm / 3500mm
Rate may be quoted for each item separately. 3.2.2 Cross Travel (CT) 1,600 mm 3.3.0 Height of Lift 3.3.1 Height of Lift As above 3.3.2 Rail to Rail Height 1. 5600 mm 2. 3500 mm (Rail on the Floor to Rail on Side Bracket)
3.4.0 DUTY CYCLE Related to Drive Motor & Mechanisms 3.4.1 Hoists 40 % CDF 3.4.2 Long Travel 40 % CDF 3.4.1 Cross Travel 40 % CDF 3.5.0 SPEED Operating / Working Speed [Maximum] 3.5.1 Main Hoist 5.0 mtrs./minute. 3.5.2 Cross Travel (CT) 15.0 mtrs./minute. 3.5.3 Long Travel (LT) 30.0 mtrs./minute. 3.6.0 MOTOR RATINGS Electric Motor Ratings & Frame Sizes shall be as per IS-325 and IS-1231 and also suitable for 300 starts per hour.
3.6.1 Main Hoist Min 6.7 kW Frame size - 160 M/6 Pole 3.6.2 Cross Travel (CT) Min 2.6 kW - Frame size - 132 M/6 Pole 3.6.3 Long Travel (LT) Min 2.6 kW x 2 - Frame size - 132 M/6 Pole 3.7.0 GEAR BOX Gear Box Size 3.7.1 Main Hoist HR 525 mm 3.7.2 Cross Travel (CT) VR 275 mm 3.7.3 Long Travel (LT) VR 450 mm CABS-3-60N-5 T Semi Gantry Crane- Part-B
R . F . P S. A R . R S. N A . V S. M 3 | P age11
S.No. PARTICULARS BHEL SPECIFICATIONS VENDORs OFFER 3.8.0 ACCELERATION 3.8.1 Cross Travel (CT) 300 mm / sec.sq. 3.8.2 Long Travel (LT) 300 mm / sec. sq. 3.9.0 HOIST ROPE DETAILS Size and Number of Falls of Rope 3.9.1 Main Hoist Dia. 12 mm ; Falls - 4 3.10.0 CONTROL Cabin Control only 3.11.0 Type of Control Master Control 3.12.0 Control Voltage 110 V AC 3.13.0 Input Power Supply 415 V with 10% fluctuation , 50HZ with 3% fluctuation, 3 Phase- AC
3.14.0 Duty Class Class 3 [Indoor Service] 3.15.0 Mechanism Group Classification M 6
3.16.0 DESIGN STANDARD IS 807 & 3177 / 2006 3.17.0 Runway Rail Size 3.17.1 Cross Travel (CT) ISR 60 Lbs./Yard 3.17.2 Long Travel (LT) CR 80 3.18.0 Wheel Size 3.18.1 Cross Travel (CT) 250 mm 3.18.2 Long Travel (LT) 400 mm 3.19.0 Brake Drum Size Hoist Brake Drum Sizes 3.19.1 Main Hoist 200 mm 3.19.2 Cross Travel (CT) 160 mm 3.19.3 Long Travel (LT) 160 mm 4.0.0 MAIN FEATURES Crane Operational Features 4.1.0 Control System Frequency Converter type for all motions 4.2.0 Crane Operation From Cabin with Push Button operation 5.0.0 STRUCTURAL FABRICATION Crane Structure Constructional Details 5.1.0 Bridge / Leg/ End Carriage/ Bogie PLATE FORMED Box type Construction CABS-3-60N-5 T Semi Gantry Crane- Part-B
R . F . P S. A R . R S. N A . V S. M 4 | P age11
S.No. PARTICULARS BHEL SPECIFICATIONS VENDORs OFFER 5.2.0 Raw Material IS: 2062 Only steel plates tested and certified for quality by reputed inspection authorities, shall be used. Test Certificates to be produced for BHEL verification and form part of the documentation.
5.3.0 Welded Joints To be followed for Bridge/leg Fabrication 5.3.1 Number of Joints allowed For Span upto 23 mtrs. - Two joints For Span 23 mtrs. to 32 mtrs. - Three joints
5.3.2 Welding Electrodes a. For all Horizontal Welding E 7018 / ER70S-6 (MIG) Electrode only should be used. b. For all Vertical Welding E 7048 / ER70S-6 (MIG) Electrode only should be used.
5.3.3 Welded Joint Testing All Butt Welded Joints (both compression / tension and flanges / web joints) shall be subjected to 100% X-Ray Testing and X-Ray Films to be produced for BHEL verification and form part of the documentation.
5.4.0 Splice Joints NO SPLICE JOINT IS ALLOWED IN GIRDER FABRICATION [Girder has to be of SINGLE PIECE only].
5.5.0 Platform on Girders The Platforms provided on both the Girders shall be fixed through BOLTED JOINTS using fit bolt only.
5.6.0 Wheel Assembly The Wheel Assembly coming for Cross Travel (CT) & Long Travel (LT) shall be of LIVE AXLE SYSTEM with L-Type Bearings. [Refer to BHEL Drawing No. 3-M-02R-0011993. Drawing is enclosed and given as ANNEXURE -1].
CABS-3-60N-5 T Semi Gantry Crane- Part-B
R . F . P S. A R . R S. N A . V S. M 5 | P age11
S.No. PARTICULARS BHEL SPECIFICATIONS VENDORs OFFER 5.7.0 Heat Treatment & NDT Examination The Trolley shall be Stress Relieved if required after welding and NDT examinations. All weldings shall be tested by NDT means [MPI, LPI & RT].
5.8.0 Machining Operation All mechanical mating surfaces and wheel seating areas are to be machined to the required finish and protected
5.9.0 Surface Cleaning Both the Girders, legs, end-carriages and the Trolley are to be thoroughly cleaned after completion of all operations but prior to painting.
5.10.0 Painting The crane parts are to be painted as follows : a. One coat of Primer with 25 microns of DFT (Dry Film Thickness) and 48 hours of compulsory curing after painting. b. Two coats of Enamel Paint (Colour Golden yellow) each with a DFT of 25 microns and intermittent curing of minimum 16 hours.
6.0.0 MECHANICAL ELEMENTS 6.1.0 Gears Gears in all the Stages shall be helical in design and to be of machined, lapped/ground and hardened.
6.2.0 Gear Box Casing Shall be of fabricated type and stress relived by thermal heat-treatment process, prior to machining.
6.3.0 Gear & thruster oil Required grade oil should be supplied 6.4.0 Rope Drum Shall be of fabricated type and stress relieved. The circumferential weld joints shall be tested by 100 % X-Ray for quality assurance. Or seamless pipe to suit the requirement
CABS-3-60N-5 T Semi Gantry Crane- Part-B
R . F . P S. A R . R S. N A . V S. M 6 | P age11 S.No. PARTICULARS BHEL SPECIFICATIONS VENDORs OFFER 6.5.0 Type of Coupling Only GEARED COUPLING to be used a. between Electric Motor and Gear Box b. between Gear Box and Rope Drum c. between Gear Box and Trolley Wheels
6.6.0 Wheels The Wheels shall be of Forged and Wheel Tread hardened to 300/350 BHN. Wheels shall be fitted with L-Type Bearings
6.7.0 Mechanical Joints Fit Bolts as per IS 3640-1982 for all joints coming in main members and platform with reamed holes
6.8.0 Pulley Dimension Rope Pulley diameter shall be 23 times that of Rope diameter
6.9.0 Hook Hook latch shall be provided for both hooks 6.10.0 Tools The following tools of makes acceptable to BHEL shall be supplied along with each crane (Vendor to clearly specify the makes of each items in the offer)
6.10.1 List of Tools 1 Double end spanner -one set 2 Ring spanner -one set 3 Hammer 2lbs -one no 4 Screw driver -one set 5 Screw spanner -one set 6 Cutting pliers -one set 7 line tester -one no 8 Grease gun -one no
7.0.0 ELECTRICAL ELEMENTS 7.1.0 Operational Controls The Crane shall be provided with the Cabin Control [Master Control] - Push Button Type]
7.2.0 Control Voltage 110 V AC 7.3.0 Type of Brakes a. Main Hoist - DCEM Brake b. Cross Travel - Thruster Brake c. Long Travel - Thruster Brake
CABS-3-60N-5 T Semi Gantry Crane- Part-B
R . F . P S. A R . R S. N A . V S. M 7 | P age11 S.No. PARTICULARS BHEL SPECIFICATIONS VENDORs OFFER 7.4.0 Protection All Panels, Limit-Switches and Motors shall have IP 54 protection. (Outdoor Service)
7.5.0 Electric Contactors All Panels shall have only SIEMENS / L&T Contactors and shall be suitable for AC3 Duty Class.
7.6.0 Contactors Rating The rating of all Contactors shall be atleast 50% higher than the respective electric motor full load current, at the specified duty cycle.
7.7.0 Long Travel Motion A Dual Drive Mechanism shall be provided for LT (Long Travel) Motion.
7.8.0 Controller Steps 4-Step 40amps master Controller with two neutral inter lock has to be provided for a. Main Hoist b. Long Travel c. Cross Travel
7.9.0 Crab Wiring The CRAB shall be fully wired without junction box.
8.0.0 SELECTION of BOI and COMPONENTS The makes of Components or Bought-Out-Items shall be strictly as per the list given below. 8.1.0 Hoist Hooks HERMAN MOHTTA / HERCULES / SILPA UDYOG / SMRITI FORGINGS / KARACHIWALA
8.2.0 Wire Rope USHA MARTIN / FORT WILLIAM / RA WIRE ROPE
R . F . P S. A R . R S. N A . V S. M 8 | P age11 S.No. PARTICULARS BHEL SPECIFICATIONS VENDORs OFFER 8.9.0 Rotary limit switch SIEMENS / OMEGA / SOC / INDUSTRIAL SYNDICATE
8.10.0 Switch fuse unit L&T / SIEMENS / GEC 8.11.0 Moulded case CB SIEMENS / L&T 8.12.0 Pneumatic Time Delay Only BCH make 8.13.0 Push - Buttons SIEMENS / L&T /AIRON 8.14.0 Connectors ELMAX make or reputed make with IS approved with acceptable BHEL
8.18.0 Resistance box OHMARK / BCH 8.19.0 VVVF Drives ABB / SIEMENS / L&T 8.20.0 DCEM brakes BCH only 9.0.0 DOCUMENTS/ DETAILS for APPROVAL The following documents and details are to be submitted for BHEL Approval, prior to taking up the manufacture of the crane.
9.1.0 Drawings and Documents Set I: a. Calculations for Selection of Electric Motors, Gear Reducers, Brakes, Couplings, etc. b. Calculations for Bridge Girder, Legs, Crab, End - Carriage and their connections. c. GA Drawing of the Crane. d. GA Drawing of Trolley e. GA Drawing of Individual Mechanisms.
CABS-3-60N-5 T Semi Gantry Crane- Part-B
R . F . P S. A R . R S. N A . V S. M 9 | P age11
S.No. PARTICULARS BHEL SPECIFICATIONS VENDORs OFFER 9.1.0 Drawings and Documents Set II: a. Drawings of Bridge, Legs, End-Carriage bogies and their connection. b. Sub-Assembly Drawing for Wheels, Hook Blocks, Gear Boxes, Hoist rope drums and all brake Drums. c. Wiring Diagram with Logic Circuits. d. Cable Selection based on Current Rating.
Initially Set I drawings to be submitted in one lot and approval to be obtained from BHEL. Based on this, set II drawings to be submitted for approval.
9.2.0 Technical Details a. Total Weight of the Crane including all Electrical Equipment b. Total Weight of Trolley including all Electrical Equipment c. Weight of each Bridge assembled and ready for erection with and without Mechanical and Electrical Equipment. d. Weight of End-carriage assembled and ready for erection e. Total Weight of Structural, Mechanical and electrical Equipment and indicated separately also. f. Weight of Operators Cabin together with all Equipment mounted in it.
10.0.0 INSPECTION The following Schedule of Stage Inspections is to be strictly adhered to, prior to dispatch from the Suppliers Works
CABS-3-60N-5 T Semi Gantry Crane- Part-B
R . F . P S. A R . R S. N A . V S. M 10 | P age11
S.No. PARTICULARS BHEL SPECIFICATIONS VENDORs OFFER 10.1.0 STAGE I a. Verification of Test Certificate for Raw Materials used for Girders, legs, End- Carriages, Trolley, Gear Box Casings, etc. b. Verification of X-Ray Report of Butt-Joints coming in the Girders and Random Testing on the Welds, by physical examination. c. Box Girder setting before closing of the Bottom Flanges for inspecting the quality of welding and presence of waviness d. Trolley Frame Fabrication before setting the Mechanisms e. EndCarriage Fabrication before closing of the Bottom Flanges
10.2.0 STAGE II [Final Inspection] a. Inspection of Bridges, legs, EndCarriages and platform fabrication. b. Verification of Span & Diagonal Dimensions, Checking of Wheel Alignment, Mechanical Assemblies and Total Alignment. c. Free running of all the Mechanisms. d. Measurement of CAMBER in the Bridges. e. Full / Rated Load Test for bridges and trolley and Deflection Test f. Deflection and Permanent Set Measurement. g. 25% OVER-LOAD Lifting Ability Check.
11.0.0 CRANE ERECTION & COMMISSIONING 11.1.0 Mechanical Erection Erection of the Crane will be done by BHEL, as per the guidelines furnished in the Erection Manual given by the supplier.
CABS-3-60N-5 T Semi Gantry Crane- Part-B
R . F . P S. A R . R S. N A . V S. M 11 | P age11
S.No. PARTICULARS BHEL SPECIFICATIONS VENDORs OFFER 11.2.0 Crane Commissioning Commissioning of the Crane and Performance Prove Out for 125% of Cranes Capacity and Smooth Functioning of the Crane (at BHEL Works) shall be the RESPONSIBILITY of the supplier.
12.0.0 O & M MANUALS Each Crane shall be provided with THREE Copies of Erection, Operation & Maintenance Manual hard copy as well as soft copy in CD, containing the following technical details
12.1.0 Drawings & Details a. Crane GA Drawing b. Crab Assembly Drawing c. Total Crane Wiring Schematics d. Detailed Wiring Diagrams for Sub-Systems / Panels e. Wheel Assembly Drawings f. Bottom Block Assembly Drawing g. Gear Box Assembly Drawings h. Coupling Drawing and Details i. Specifications/Ratings of All Bought- Out-Items j. Warranty / Guarantee Card for all Bought-Out-Items k. Trouble Shooting Chart for Main and all Sub-Systems
13.0.0 PERFORMANCE GUARANTEE The Performance of the Total Crane and/or the Components / Sub-Assemblies / Bought- Out-Items shall be guaranteed for a minimum period of twelve months from the date of performance acceptance at BHEL Works or 18 months from the date of supply whichever is earlier.