(Back to the College Algebra Homepage)

(Back to the GRE Math Help Page)

College Algebra
Tutorial 7:
Factoring Polynomials

Learning Objectives

After completing this tutorial, you should be able to:

1. Find the Greatest Common Factor (GCF) of a polynomial.

2. Factor out the GCF of a polynomial.
3. Factor a polynomial with four terms by grouping.
4. Factor a trinomial of the form .
5. Factor a trinomial of the form .
6. Indicate if a polynomial is a prime polynomial.
7. Factor a perfect square trinomial.
8. Factor a difference of squares.
9. Factor a sum or difference of cubes.

10. Apply the factoring strategy to factor a polynomial completely.

Introduction

Factoring is to write an expression as a product of factors. For example, we can

write 10 as (5)(2), where 5 and 2 are called factors of 10. We can also do this
with polynomial expressions. In this tutorial we are going to look at several
ways to factor polynomial expressions. By the time I'm are through with you,
you will be a factoring machine.
Basically, when we factor, we reverse the process of multiplying the
polynomial which was covered in Tutorial 6: Polynomials.

Tutorial

Greatest Common Factor (GCF)

The GCF for a polynomial is the largest monomial that divides (is a factor
of) each term of the polynomial.

Factoring out the GCF

Step 1: Identify the GCF of the polynomial.

Step 2: Divide the GCF out of every term of the polynomial.

This process is basically the reverse of the distributive property.

Example 1: Factor out the GCF: .

Step 1: Identify the GCF of the polynomial.

The largest monomial that we can factor out of each term is 2y.
Step 2: Divide the GCF out of every term of the polynomial.

*Divide 2y out of every term of the poly.

Be careful. If a term of the polynomial is exactly the same as the

GCF, when you divide it by the GCF you are left with 1, NOT 0.
Don’t think, 'oh I have nothing left', there is actually a 1. As shown
above when we divide 2y by 2y we get 1, so we need a 1 as the third
term inside of the ( ).

Note that if we multiply our answer out, we should get the original
polynomial. In this case, it does check out. Factoring gives you
another way to write the expression so it will be equivalent to the
original problem.

Example 2: Factor out the GCF: .

This problem looks a little different, because now our GCF is a

binomial. That is ok, we treat it in the same manner that we do when
we have a monomial GCF.

Note that this is not in factored form because of the plus sign we have
before the 5 in the problem. To be in factored form, it must be written
as a product of factors.

Step 1: Identify the GCF of the polynomial.

This time it isn't a monomial but a binomial that we have in common.

Our GCF is (3x -1).

Step 2: Divide the GCF out of every term of the polynomial.

*Divide (3x - 1) out of both parts

When we divide out the (3x - 1) out of the first term, we are left with
x. When we divide it out of the second term, we are left with 5.

That is how we get the (x + 5) for our second ( ).

Factoring a Polynomial with

Four Terms by Grouping

In some cases there is not a GCF for ALL the terms in a polynomial. If you
have four terms with no GCF, then try factoring by grouping.

Step 1: Group the first two terms together and then the last two
terms together.

Step 2: Factor out a GCF from each separate binomial.

Step 3: Factor out the common binomial.

Example 3: Factor by grouping: .

Note how there is not a GCF for ALL the terms. So let’s go ahead and
factor this by grouping.
Step 1: Group the first two terms together and then the last two
terms together.

*Two groups of two terms

Step 2: Factor out a GCF from each separate binomial.

*Factor out an x squared from the 1st ( )

*Factor out a 2 from the 2nd ( )

Step 3: Factor out the common binomial.

*Divide (x + 3) out of both parts

Note that if we multiply our answer out, we do get the original

polynomial.

Example 4: Factor by grouping: .

Note how there is not a GCF for ALL the terms. So let’s go ahead and
factor this by grouping.

Step 1: Group the first two terms together and then the last two
terms together.
 *Two groups of two terms

Be careful. When the first term of the second group of two has a
minus sign in front of it, you want to put the minus in front of the
second ( ). When you do this you need to change the sign of BOTH
terms of the second ( ) as shown above.

Step 2: Factor out a GCF from each separate binomial.

*Factor out a 7x squared from the 1st ( )

*Nothing to factor out from the 2nd ( )

Step 3: Factor out the common binomial.

*Divide (x - 2) out of both parts

Note that if we multiply our answer out that we do get the original
polynomial.

Factoring Trinomials of the Form

(Where the number in front of x squared is 1)

Basically, we are reversing the FOIL method to get our factored form. We
are looking for two binomials that when you multiply them you get the
given trinomial.
Step 1: Set up a product of two ( ) where each will hold two terms.

It will look like this: ( )( ).

Step 2: Find the factors that go in the first positions.

To get the x squared (which is the F in FOIL), we would have to

have an x in the first positions in each ( ).

So it would look like this: (x )(x ).

Step 3: Find the factors that go in the last positions.

The factors that would go in the last position would have to be

two expressions such that their product equals c (the
constant) and at the same time their sum equals b (number
in front of x term).

As you are finding these factors, you have to consider the sign
of the expressions:

If c is positive, your factors are going to both have

the same sign depending on b’s sign.

If c is negative, your factors are going to have

opposite signs depending on b’s sign.

Example 5: Factor the trinomial: .

Note that this trinomial does not have a GCF.

 So we go right into factoring the trinomial of the form .

Step 1: Set up a product of two ( ) where each will hold two terms.

It will look like this: ( )( )

Step 2: Find the factors that go in the first positions.

Since we have a squared as our first term, we will need the following:

(a )(a )

Step 3: Find the factors that go in the last positions.

We need two numbers whose product is -14 and sum is -5. That
would have to be -7 and 2.

Putting that into our factors we get:

*-7 and 2 are two numbers whose prod. is -14

and sum is -5

Note that if we would multiply this out, we would get the original
trinomial.

Example 6: Factor the trinomial: .

Note that this trinomial does have a GCF of 2y.

We need to factor out the GCF before we tackle the trinomial part of
 this.

*Factor out the GCF of 2y

We are not finished, we can still factor the trinomial. It is of the

form .

Anytime you are factoring, you need to make sure that you factor
everything that is factorable. Sometimes you end up having to do
several steps of factoring before you are done.

Step 1 (trinomial): Set up a product of two ( ) where each will hold

two terms.

It will look like this: 2y( )( )

Step 2 (trinomial): Find the factors that go in the first positions.

Since we have x squared as our first term, we will need the following:

2y(x )(x )

Step 3 (trinomial): Find the factors that go in the last positions.

We need two numbers whose product is 15 and sum is 8. That

would have to be 5 and 3.

Putting that into our factors we get:

*5 and 3 are two numbers whose prod. is 15

*and sum is 8
 Note that if we would multiply this out, we would get the original
trinomial.

Factoring Trinomials of the Form

(where a does not equal 1)

Again, this is the reverse of the FOIL method.

The difference between this trinomial and the one discussed above, is there is a
number other than 1 in front of the x squared. This means, that not only do
you need to find factors of c, but also a.

Step 1: Set up a product of two ( ) where each will hold two terms.

It will look like this ( )( )

Step 2: Use trial and error to find the factors needed.

The factors of a will go in the first terms of the binomials

and the factors of c will go in the last terms of the
binomials.

The trick is to get the right combination of these factors. You

can check this by applying the FOIL method. If your product
comes out to be the trinomial you started with, you have the
right combination of factors. If the product does not come out
to be the given trinomial, then you need to try again.
 Example 7: Factor the trinomial .

Note that this trinomial does not have a GCF.

So we go right into factoring the trinomial of the form .

Step 1: Set up a product of two ( ) where each will hold two terms.

It will look like this: ( )( )

Step 2: Use trial and error to find the factors needed.

In the first terms of the binomials, we need factors of 3 x squared.

This would have to be 3x and x.

In the second terms of the binomials, we need factors of 2. This

would have to be 2 and 1. I used positives here because the middle
term is positive.

Also, we need to make sure that we get the right combination of these
factors so that when we multiply them out we get .

Possible Factors Check using the FOIL Method

First try:

This is not our original polynomial.

So we need to try again.

 Second try:

This is our original polynomial.

So this is the correct combination of factors for this

polynomial.

This process takes some practice. After a while you will get used to it and
be able to come up with the right factor on the first try.

Example 8: Factor the trinomial .

Note that this trinomial does not have a GCF.

 So we go right into factoring the trinomial of the form

Step 1: Set up a product of two ( ) where each will hold two terms.

It will look like this: ( )( )

Step 2: Use trial and error to find the factors needed.

In the first terms of the binomials, we need factors of 5 x squared.

This would have to be 5x and x.

In the second terms of the binomials, we need factors of -8. This

would have to be -8 and 1, 8 and -1, 2 and -4, or -2 and 4. Since the
product of these factors has to be a negative number, we need one
positive factor and one negative factor.

Also we need to make sure that we get the right combination of these
factors so that when we multiply them out we get .

Possible Factors Check using the FOIL Method

First try:

This is our original polynomial.

So this is the correct combination of factors for this

polynomial.
 Prime Polynomials

Not every polynomial is factorable. Just like not every number has a factor
other than 1 or itself. A prime number is a number that has exactly two factors,
1 and itself. 2, 3, and 5 are examples of prime numbers.

The same thing can occur with polynomials. If a polynomial is not factorable
we say that it is a prime polynomial.

Sometimes you will not know it is prime until you start looking for factors of it.
Once you have exhausted all possibilities, then you can call it prime. Be
careful. Do not think because you could not factor it on the first try that it
is prime. You must go through ALL possibilities first before declaring it
prime.

Example 9: Factor the trinomial .

Note that this trinomial does not have a GCF.

So we go right into factoring the trinomial of the form .

Step 1: Set up a product of two ( ) where each will hold two terms.

It will look like this: ( )( )

Step 2: Find the factors that go in the first positions.

 Since we have x squared as our first term, we will need the following:

(x )(x )

Step 3: Find the factors that go in the last positions.

We need two numbers whose product is 12 and sum is 5.

Can you think of any????

Since the product is a positive number and the sum is a positive

number, we only need to consider pairs of numbers where both
signs are positive.

One pair of factors of 12 is 3 and 4, which does not add up to be 5.

Another pair of factors are 2 and 6, which also does not add up to
5.
Another pair of factors are 1 and 12, which also does not add up to
5.

Since we have looked at ALL the possible factors, and none of them
worked, we can say that this polynomial is prime. In other words,
it does not factor.

Factoring a Perfect Square Trinomial

OR

It has to be exactly in this form to use this rule. When you have a base being
squared plus or minus twice the product of the two bases plus another base
squared, it factors as the sum (or difference) of the bases being squared.

This is the reverse of the binomial squared found in Tutorial 6:

Polynomials. Recall that factoring is the reverse of multiplication.

Example 10: Factor the perfect square trinomial: .

First note that there is no GCF to factor out of this polynomial.

Since it is a trinomial, you can try factoring this by trial and error
shown above. But if you can recognize that it fits the form of a
perfect square trinomial, you can save yourself some time.

*Fits the form of a perfect sq. trinomial

*Factor as the sum of bases squared

Note that if we would multiply this out, we would get the original
polynomial.

Example 11: Factor the perfect square trinomial: .

First note that there is no GCF to factor out of this polynomial.

Since it is a trinomial, you can try factoring this by trial and error
shown above. But if you can recognize that it fits the form of a
perfect square trinomial, you can save yourself some time.

*Fits the form of a perfect sq. trinomial

*Factor as the diff. of bases squared
 Note that if we would multiply this out, we would get the original
polynomial.

Factoring a Difference of Two Squares

Note that the sum of two squares DOES NOT factor.

Just like the perfect square trinomial, the difference of two squares has to be
exactly in this form to use this rule. When you have the difference of two
bases being squared, it factors as the product of the sum and difference of
the bases that are being squared.

This is the reverse of the product of the sum and difference of two terms
found in Tutorial 6: Polynomials. Recall that factoring is the reverse of
multiplication.

Example 12: Factor the difference of two squares: .

First note that there is no GCF to factor out of this polynomial.

This fits the form of a the difference of two squares. So we will factor
using that rule:

*Fits the form of a diff. of two squares

*Factor as the prod. of sum and diff. of bases
 Note that if we would multiply this out, we would get the original
polynomial.

Example 13: Factor the difference of two squares: .

First note that there is no GCF to factor out of this polynomial.

This fits the form of the difference of two squares. So we will factor
using that rule:

*Fits the form of a diff. of two squares

*Factor as the prod. of sum and diff. of bases

Note that if we would multiply this out and the original expression out
we would get the same polynomial.

Factoring a Sum of Two Cubes

The sum of two cubes has to be exactly in this form to use this rule. When you
have the sum of two cubes, you have a product of a binomial and a
trinomial. The binomial is the sum of the bases that are being cubed. The
trinomial is the first base squared, the second term is the opposite of the
product of the two bases found, and the third term is the second base
squared.
 Example 14: Factor the sum of cubes: .

First note that there is no GCF to factor out of this polynomial.

This fits the form of the sum of cubes. So we will factor using that
rule:

*Fits the form of a sum of two cubes

*Binomial is sum of bases
*Trinomial is 1st base squared, minus prod.
of bases, plus 2nd base squared

Note that if we would multiply this out, we would get the original
polynomial.

Factoring a Difference of Two Cubes

This is factored in a similar fashion to the sum of two cubes. Note the only
difference is that the sign in the binomial is a - which matches the original sign,
and the sign in front of ax is positive, which is the opposite sign.

The difference of two cubes has to be exactly in this form to use this rule.
When you have the difference of two cubes, you have a product of a
binomial and a trinomial. The binomial is the difference of the bases that
are being cubed. The trinomial is the first base squared, the second term is
the opposite of the product of the two bases found, and the third term is the
second base squared.

Example 15: Factor the difference of cubes: .

 First note that there is no GCF to factor out of this polynomial.

This fits the form of the difference of cubes. So we will factor using
that rule:

*Fits the form of a diff. of two cubes

*Binomial is diff. of bases
*Trinomial is 1st base squared, plus prod. of
bases, plus 2nd base squared

Note that if we would multiply this out, we would get the original
polynomial.

Now that you have a list of different factoring rules, let’s put it all together. The
following is a checklist of the factoring rules that we have covered in our
tutorials.

When you need to factor, you ALWAYS look for the GCF first. Whether
you have a GCF or not, then you continue looking to see if you have
anything else that factors.

Below is a checklist to make sure you do not miss anything. Always factor
until you can not factor any further.

Factoring Strategy

I. GCF:

Always check for the GCF first, no matter what.

II. Binomials:

a.
 b.

c.

III. Trinomials:

a.

b. Trial and error:

c. Perfect square trinomial:

IV. Polynomials with four terms:

Factor by grouping

Example 16: Factor completely.

The first thing that we always check when we are factoring is WHAT?

The GCF. In this case, there is one.

Factoring out the GCF of 3 we get:

*Factor a 3 out of every term

Next, we assess to see if there is anything else that we can factor. We
have a trinomial inside the ( ). It fits the form of a perfect square
trinomial, so we will factor it accordingly:

*Fits the form of a perfect sq. trinomial

*Factor as the sum of bases squared

There is no more factoring that we can do in this problem.

Note that if we would multiply this out, we would get the original
polynomial.

Example 17: Factor completely.

The first thing that we always check when we are factoring is WHAT?

The GCF. In this case, there is not one.

So we assess what we have. It fits the form of a difference of two

squares, so we will factor it accordingly:

*Fits the form of a diff. of two squares

*Factor as the prod. of sum and diff. of bases

Next we assess to see if there is anything else that we can factor. Note
how the second binomial is another difference of two squares. That
means we have to continue factoring this problem.
 *Fits the form of a diff. of two squares
*Factor as the prod. of sum and diff. of bases

There is no more factoring that we can do in this problem.

Note that if we would multiply this out, we would get the original
polynomial.

Example 18: Factor completely.

The first thing that we always check when we are factoring is WHAT?

The GCF. In this case, there is not one.

So we assess what we have. It fits the form of a sum of two cubes, so

we will factor it accordingly:

*Fits the form of a sum of two cubes

*Binomial is sum of bases
*Trinomial is 1st base squared, minus
prod. of bases, plus 2nd base squared

There is no more factoring that we can do in this problem.

Note that if we would multiply this out, we would get the original
polynomial.

Example 19: Factor completely.

The first thing that we always check when we are factoring is WHAT?

The GCF. In this case, there is not one.

So we assess what we have. This is a trinomial that does not fit the
form of a perfect square trinomial. Looks like we will have to use trial
and error:

*Factor by trial and error

There is no more factoring that we can do in this problem.

Note that if we would multiply this out, we would get the original
polynomial.

Example 20: Factor completely.

The first thing that we always check when we are factoring is WHAT?

The GCF. In this case, there is not one.

So we assess what we have. This is a polynomial with four terms.

Looks like we will have to try factoring it by grouping:

*Group in two's
*Factor out the GCF out of each separate (
)
*Factor out the GCF of (x + 5b)

There is no more factoring that we can do in this problem.

Note that if we would multiply this out, we would get the original
polynomial.
 Practice Problems

These are practice problems to help bring you to the next level. It will allow
you to check and see if you have an understanding of these types of problems.
Math works just like anything else, if you want to get good at it, then you
need to practice it. Even the best athletes and musicians had help along the
way and lots of practice, practice, practice, to get good at their sport or
instrument. In fact there is no such thing as too much practice.

To get the most out of these, you should work the problem out on your own
and then check your answer by clicking on the link for the
answer/discussion for that problem. At the link you will find the answer as
well as any steps that went into finding that answer.

Practice Problems 1a - 1f:

Factor completely.

1a. 1b.
(answer/discussion to 1a) (answer/discussion to 1b)

1c. 1d.
(answer/discussion to 1c) (answer/discussion to 1d)

1e. 1f.
(answer/discussion to 1e) (answer/discussion to 1f)
 Need Extra Help on These Topics?

The following are webpages that can assist you in the topics that were
covered on this page:

http://www.wtamu.edu/academic/anns/mps/math/mathlab/int_algebra/
int_alg_tut27_gcf.htm
This webpage goes over how to factor out a GCF and how to factor by grouping.

http://www.purplemath.com/modules/simpfact.htm
This webpage helps you with factoring out the GCF.

http://www.mathpower.com/tut111.htm
This webpage will help you with factoring out the GCF.

http://www.studycoach.com/alg/classnotes/combining&simplifying/
factoring/gcf.html
This webpage will help you with factoring out the GCF.

http://www.studycoach.com/alg/classnotes/combining&simplifying/factoring/

factoringgrouping.htm
This webpage will help you with how to factor by grouping.

http://www.wtamu.edu/academic/anns/mps/math/mathlab/int_algebra/
int_alg_tut28_facttri.htm
This webpage goes over how to factor trinomials.

http://www.purplemath.com/modules/factquad.htm
This webpage helps you factor trinomials.

http://www.mathpower.com/tut47.htm
This website helps you factor trinomials.

http://www.mathpower.com/tut31.htm
This website helps you factor trinomials.

http://www.wtamu.edu/academic/anns/mps/math/mathlab/int_algebra/
int_alg_tut29_specfact.htm
This webpage goes over how to factor perfect square trinomial, difference of
squares, and sum or difference of cubes.

http://www.sosmath.com/algebra/factor/fac05/fac05.html
 This webpage helps you with the factoring by special products discussed in this
tutorial.

http://www.purplemath.com/modules/specfact.htm
This webpage helps you with the factoring by special products discussed in this
tutorial.

Go to Get Help Outside the Classroom found in Tutorial 1: How to Succeed

in a Math Class for some more suggestions.

(Back to the College Algebra Homepage)

(Back to the GRE Math Help Page)

All contents copyright (C) 2002, WTAMU and Kim Peppard. All rights reserved.
Last revised on June 22, 2003 by Kim Peppard.