Scribd Logo
Upload

Welcome to Scribd!

  • 71 views

    GB Flyer Compressors Sheet

    Uploaded by

    capabilu1
    The document discusses piston rings and guide bearings made of various PTFE compounds and materials like Vespel SP21 and PEEK that are used in compressors to guarantee best performance. It provides information on the properties and applications of these materials as well as maximum operating temperatures.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    GB Flyer Compressors Sheet

    Uploaded by

    capabilu1
    71 views2 pages
    The document discusses piston rings and guide bearings made of various PTFE compounds and materials like Vespel SP21 and PEEK that are used in compressors to guarantee best performance. It provides information on the properties and applications of these materials as well as maximum operating temperatures.

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document discusses piston rings and guide bearings made of various PTFE compounds and materials like Vespel SP21 and PEEK that are used in compressors to guarantee best performance. It provides information on the properties and applications of these materials as well as maximum operating temperatures.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    71 views2 pages

    GB Flyer Compressors Sheet

    Uploaded by

    capabilu1
    The document discusses piston rings and guide bearings made of various PTFE compounds and materials like Vespel SP21 and PEEK that are used in compressors to guarantee best performance. It provides information on the properties and applications of these materials as well as maximum operating temperatures.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    Compressor component s

    PISTON RINGS and GUIDE BEARINGS


    Application field
    of piston rings
    and guide bearings
    Dry compressors
    Reduced lubrication
    compressors
    Refrigeration units
    Expansion units
    Pumps for the chemical
    industry
    Pumps for liquefied
    gases at low temperature
    In order to guarantee best performances to the compressors, piston rings and bearing guides made up of
    various PTFE compounds are largely used, replacing traditional materials like cast iron, graphite and stratified
    structured materials. Pure PTFE chemical inertness makes this material suitable for all the applications where
    high chemical resistance is required in presence of almost technical gases and fluids. Exemptions exist in
    presence of alkaline metals in the molten state, fluorides and fluoridric acid in the gaseous state, and
    some fluorocarbons at high temperatures and pressures. PTFE piston rings and guide bearings can be used
    at temperatures up to 260C, depending on the system pressure and piston speed this temperature limit
    value should be lowered. In order to improve wear resistance and to rise the working temperature limit
    DuPontT
    M
    Vespel

    SP21 is also used to manufacture floating rings, piston rings and guide bearings. Fluorten
    manufactures also components in natural and filled VICTREX

    PEEK
    TM
    for inlet and outlet valves.
    Property* Standard Units
    Typical values
    PTFE
    C-657
    PTFE
    BM-40111
    PTFE
    VGM-70411
    PEEK
    NAT.
    PEEK
    V-706
    PEEK
    CF-706
    DuPont
    TM
    Vespel

    SP21
    Density ASTM D 792 g/cm
    3
    2,10 3,80 2,27 1,30 1,54 1,40 1,42
    Tensile strenght ASTM D 4894 Mpa 14 18 18 **100 **150 **200 **62
    Elongation ASTM D 4894 % 50 140 150 **30 **2 **1,5 **5,5
    Hardness ASTM D 676 Shore D 67 67 64 *99 *103 *107 80
    Maximum operating
    temperature
    / C +250 +250 +250 +240 +240 +240 +300
    PTFE and TECHNOPOLYMERS special formulations available on demand. For any further infotmation please contact our technical office
    *Rockwell Hardness scale M in compliance with Standard ASTM D785
    **Ultimate tensile strenght and Ultimate elongation in compliance with Standard ISO 527
    24060 CASTELLI CALEPIO (BG) Italy Via Cercone, 34 Tel. +39 035 4425115 Fax +39 035 848496
    [email protected] www.fluorten.com
    Since 1966 FLUORTEN is an industrial production leader in design, extrusion, moulding and machining, able to supply semi-finished and finished products in PTFE and injection
    moulded technopolymers. The production cycle and Quality of FLUORTEN match company philosophy to work with each Customer to solve project design and production
    problems to obtain a competitive product.
    Compressors components
    PISTON RINGS and GUIDE BEARINGS
    piston rod
    piston ring Guide bearing
    oil scraper
    floating rings
    valve-(inlet or outlet)
    C
    A
    T
    .
    3
    0
    /
    M
    A
    R
    .
    1
    3
    PTFE and Rulon

    Finished parts Sliper rings and FLUOR-S/SC Tapes


    Spring energized seals Official Italy distributor of
    DuPont
    TM
    Vespel

    trademark
    Technopolymers injection moulding VICTREX

    PEEK
    TM
    / PCTFE
    Semifinished products
    Whilst data and information given here are the result of our considerable experience they are only intended as a guide line and Fluorten s.r.l. can accept no responsability either for the results
    obtained from this information or for situations in conflict with any existing patents.
    PTFE and HPP ball valves
    components

    You might also like