Table of Contents

Safety 1
Electrical safety 1
Installation safety 1
Cleaning safety 1
Special notes on LCD monitors
2
Package contents 2
Installation instructions 3
Placement 3
Installation 3
External controls 4
Image adjustment 5
Screen adjustment 7
Attachments 8
Plug and play 8
Power saver 8
Troubleshooting 8
Technical specifications 9
Display modes 10

Downloaded from www.Manualslib.com manuals search engine

1

Safety
Electrical safety
Note: To ensure your safety and prolong the life of the product, read the following
safety recommendations carefully before using the product for the first time.
Do not touch the inside of the monitor. Only authorized and qualified
technicians should open the LCD monitor case.
Hold the plug (not the power cable) when you connect the plug to the socket.
Make sure your hands are dry.
This product should only be operated with the type of power indicated on the
marking label. If you are not sure of the type of power available, consult your
dealer or local power company.
This product is equipped with a 3-prong plug, (a plug having a third grounding
pin). This plug will only fit into a grounded power outlet. If you are unable to
insert the grounded plug into the outlet, contact your electrician to replace your
obsolete outlet. Do not use a two-prong adapter instead of the grounded plug.
Dont expose your LCD monitor to water, or any environment with a high
temperature or humidity, such as kitchens or swimming pools. Flower vases filled
with water are also dangerous.
If your LCD monitor operates abnormally (i.e., releases smoke, noise or a smell),
remove the plug immediately and contact your authorized dealer or service
center.
Installation safety
Don't touch your LCD monitor with your fingers or any hard object. Avoid
scratching or leaving any oil sludge on the surface of the display.
Protect your LCD monitor by installing it in a place that is well-ventilated,
moisture proof, and dust-free.
Dont install your LCD monitor near a heat source, (i.e., ovens, space heaters, fire
places, furnaces or in the sun).
To avoid electric shock, or dropping, install your LCD monitor in a place where
children will not touch it. Secure your LCD monitor firmly and explain the safety
rules to children, if required.
When installing your LCD monitor or adjusting its angle, attention should be
paid to the loading capability and leveling of the structure supporting the LCD
monitor.
Cleaning safety
Dont spray cleanser or water onto your LCD monitor or its case.
When cleaning your LCD monitor, make sure that no liquid permeates into the
inside of the LCD monitor or any accessory.
Moisten a clean, soft, lint-free cloth with water or glass cleaner without alcohol.
Squeeze it so it's just a little damp and wipe the surface of your LCD monitor
gently. It is recommended to use a silk cloth that is exclusively used to clean the
display.

Downloaded from www.Manualslib.com manuals search engine

2

Special notes on LCD monitors
The following symptoms are normal for LCD monitors and do not indicate a problem with the device:
Due to the nature of the fluorescent light, the screen may flicker during initial use. Turn off the
power switch and then turn it on again to make the flicker disappear.
You may find slightly uneven brightness on the screen depending on the desktop pattern you use.
The LCD screen has effective pixels of 99.99% or more. It may include blemishes of 0.01% or less
(caused by a missing pixel or a pixel that is always lit).
When the same image is displayed for hours on end, its afterimage may remain after switching to a
new image. When this happens, the screen will recover slowly by changing the image. Turning the
LCD monitor off for several hours will also correct this problem.


Package contents
LCD display



D-Sub signal cable



DVI signal cable
(optional)


Quick Start Guide



Power cable


User's Guide (CD)




Downloaded from www.Manualslib.com manuals search engine

3

Installation instructions
Placement
Note: Read the Safety section carefully before starting the installation.
When installing your LCD monitor, consider the placement of the monitor:
To minimize the reflection of the monitor, protect your eyes, and ensure premium
quality, dont install your LCD monitor near windows or where there is backlight. Keep
the monitor at least 30 cm away from your eyes.
The upper edge of the monitor should be just a little higher than your line of sight.
Adjust the front and back dip angles of the monitor, so that you can view the display
comfortably.
Connecting the base to the monitor
Take the base out of the box and place it on a flat table.
Position the monitor on top of the base.
Connect the base into the neck of the monitor
along the track.
You will hear a click sound when the base and the
monitor are properly connected.
Installation
Connecting the LCD monitor to a PC
Make sure that the power supply of your PC is
turned off and the power plug is removed.
Connect and fasten both ends of the signal cable to
your PC host and LCD monitor, respectively.
Connect the attached power cable to your LCD
monitor.
Plug the power cable into the receptacle.
Use the cable tie to bind up the power cord and the
D-sub signal cable / DVI-D cable.
Turn on the power supplies of your PC and LCD
monitor.


Power cable
DVI signal cable (optional)
D-Sub signal cable
Downloaded from www.Manualslib.com manuals search engine

4
External
controls



1

Power source
Power On/Off
Green indication: Power is on and normal.
Orange indication: Sleep status in the energy-saving mode.
Colorless indication: Power off.
2 Menu OSD Menu Press this button to enter OSD. Press it again to exit OSD.
3 > Plus
Press this button for selection or adjustment when OSD is
started.
4 < Minus
Press this button and click < and > to adjust volume when OSD
is not started (for the model with speakers only).
5 Auto
Automatic
adjustment
Press this button to exit the manual when OSD is started.
Press this button for the display to optimize the position, phase
and clock pulse automatically when OSD is not started.

Downloaded from www.Manualslib.com manuals search engine

5
Image
adjustment
for analog
The image settings of your LCD monitor were adjusted to their optimal status for analog TV
before shipment. (See Page 9). If you want to adjust the image settings to suit your personal
preference, follow the steps below:
1. Click Menu to display the OSD window as shown in the following figure.
2. Click Plus or Minus to select the function to be adjusted as shown in the following
figure.
3. Click the Menu again to select the function to be adjusted.
4. Click Plus or Minus to change current settings.
5. To exit the OSD window, select " " to close and save changes. To change other
settings, repeat steps 2-4.






















(Analog)
Horizontal/Vertical Adjustment
Bright/Contract Adjustment
Phase/Clock pulse Adjustment
Color Temp. Adjustment
Language Selection
OSD Setting
Auto Adjustment
Message
Restore
Exit
Downloaded from www.Manualslib.com manuals search engine

6
Image
adjustment
for digital
The image settings of your LCD monitor were adjusted to their optimal status for digital TV
before shipment. (See Page 9). If you want to adjust the image settings to suit your personal
preference, follow the steps below:
1. Click Menu to display the OSD window as shown in the following figure.
2. Click Plus or Minus to select the function to be adjusted as shown in the following
figure.
3. Click the Menu again to select the function to be adjusted.
4. Click Plus or Minus to change current settings.
5. To exit the OSD window, select to close and save changes. To change other
settings, repeat steps 2-4.





















(Digital)
Bright/Contrast Adjustment
Phase/Clock Pulse Adjustment
Horizontal/Vertical Adjustment
Color Temp. Adjustment
Language Selection
Restore
OSD Setting
Input Selection
Message
Exit
Downloaded from www.Manualslib.com manuals search engine

7
Function Definition
Screen
adjustment

Primary
directory
symbol
Secondary
directory
symbol
Secondary directory
items
Description

Contrast
Adjusts the contrast between the foreground and
background of an image on the screen.


Brightness Adjusts the background brightness of the screen.

Phase
Adjusts the focus of the image
(for analog input adjustment only).


Clock pulse
Adjusts the clock pulse of the image
(for analog input adjustments only).

Horizontal
Moves the image left and right on the screen
(for analog input adjustments only).


Vertical
Moves the image up and down on the screen
(for analog input adjustments only).
N/A
Warm color
temperature
Sets the color temperature to warm white.
N/A
Cold color
temperature
Sets the color temp to cold white.

User Definition/Red

User
Definition/Green


User Definition/Blue
Adjusts red/green/blue gain.
N/A English
N/A
N/A Deutsch
N/A Franais
N/A Espaol
N/A Italiano
N/A
N/A
N/A Hollands
N/A Suomalainen

N/A
Used to select the language you want.

Horizontal Moves OSD left and right.

Vertical Moves OSD up and down.


OSD time display Adjusts OSD time display settings.

N/A Auto adjustment
Sets up horizontal, vertical, sequence and focus
automatically (for analog input only).


N/A Analog digital
Used to select the input source you want (for DVI
input only).

N/A Message
Display resolution, H/V frequency and the input port
used for current input timing function.

N/A Restore Restores system to default settings.

N/A Exit Closes the OSD window and saves changes.
Downloaded from www.Manualslib.com manuals search engine

8

Attachments
Plug and play The product provides the latest VESA plug and play feature to prevent complicated
and time-consuming installation procedures. The plug and play feature allows your
computer system to identify the LCD monitor easily and set up its functions
automatically.
The LCD monitor transfers the Extended Display Identification Data (EDID) to your
computer system via the Display Data Channel (DDC), so that your computer can
use the self-setting function of the LCD monitor.
Power saver
The LCD monitor has a built-in Power Control System (Power Saver).
When the LCD monitor is not operated for a period of time, the Power Control
System automatically sets the system at low voltage status to save power. Move the
mouse slightly or press any key to return to normal operation.
The Power Saver function can only be operated by the display card of the computer
system. You can set up this function from your computer.
The LCD monitor is compatible with EPAENERGY STAR NTEK when used with
VESA DPMS.
To save power and extend the life of the product, turn off the LCD monitor power
supply when it is idle for a long time or not being used.
Troubleshooting
Power LED does
not light
Check that the power switch is turned on.
Make sure the power cable is connected.
Icon off
Check that the power switch is turned on.
Make sure the power cable is connected.
Ensure that the signal cable is inserted in the receptacle appropriately.
The Power Saver may turn off the monitor automatically during the operation.
Make sure the monitor is restored when you press any key from the keyboard.
Color default Refer to "Color Temp. Adjustment" to adjust RGB color or select color
temperatures.
Instability or
ripple
Remove any electronic equipment in the vicinity that may cause EMI interference.
Check the signal cable of the monitor to ensure that none of the pins are bent.
Image offset or
wrong size
Press the auto adjustment button to automatically optimize the screen.
Set up the reference position.












Downloaded from www.Manualslib.com manuals search engine

9
Technical specifications
Panel dimension Diagonal 559 mm (22 inch) LCD monitor
Max. resolution 1,680 x 1,050 / WXGA+
Max. pixel Up to 16.2 M true color
Pixel span Horizontal 0.282mm x Vertical 0.282mm
Brightness 300 cd/m
2

Contrast 700 : 1
LC response time 5 ms
Visual angle Horizontal 170 / Vertical 160
LCD panel
(backlight source)
Effective display Horizontal 473.8 mm x Vertical 296.1 mm
Signal mode
Simulated video frequency: 0.7 Vpp, 75
(separate SYNC and composite SYNC)
SYNC frequency Horizontal 30 kHz 82 kHz x Vertical 56 Hz 76 Hz
Input signal
Max. pixel clock 135MHz
Input terminal Image D-Sub 15 PIN (VESA) / DVI-D (Optional)
Power transformer AC100 240 Volts, 50 60 Hz
Operation mode 48W
Power saving sleep mode 2W @230VAC 50Hz
Power
consumption
Power saving off mode 1W @230VAC 50Hz
Temperature 5C 35C (operation) / -20C 55C (storage)
Environmental
conditions
Humidity 20% 80% (operation) / 20% 85% (storage)
Actual dimensions (W x D x H) 513.5 x 198.2 x 405.2 mm
Net weight 4.9 kg
Safety standard
TCO03;UL/CUL;TV-GS;CE/LVD;TV-ERGO;CB;CCC;FCC-B;VCCI-B;
CE/EMC;C-Tick; BSMI; ISO 13406-2;EPA;PCT;NOM;WEEE;PSB;HG
Lamp disposal

Lamp(s) inside this product contain mercury and must be recycled or disposed of according to local,
state or federal laws. For more information, contact the Electronic Industries Alliance at
www.eiae.org. For lamp-specific disposal information, check www.lamprecycle.org.


This device complies with Part 15 of the FCC rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.

This Class B digital apparatus meets all requirements of the Canadian Interference- Causing
Equipment Regulations.
Cet appareil numrique de la class B respecte toures les exigencies du Rglement sur le materiel
brouilieur du Canada.
Downloaded from www.Manualslib.com manuals search engine

10

Display modes If the signal of your PC system is the same as one of the following reference signal modes,
the screen will be adjusted automatically. If not, the screen will not display or only the LED
lights will display. For more information about the adjustment mode, refer to the
instructions of your display card.
Display Mode
Hor. Frequency
(kHz)
Vert. Frequency
(Hz)
Pixel Frequency
(MHz)
SYNC Polarity
(H/V)
31.469 59.940 25.175 -/-
37.861 72.809 31.500 -/-
VGA 640x480
37.500 75.000 31.500 -/-
35.156 56.250 36.000 +/+
37.879 60.317 40.000 +/+
48.077 72.188 50.000 +/+
SVGA 800x600
46.875 75.000 49.500 +/+
48.363 60.004 65.000 -/-
56.476 70.069 75.000 -/-
XGA 1024x768
60.023 75.029 78.750 +/+
SXGA 1152x864 67.500 75.000 108.000 +/+
63.981 60.020 108.000 +/+ SXGA 1280x1024
79.976 75.025 135.000 +/+
WXGA+ 1440x900 55.935 55.887 106.5 -/+
VESA
WXGA+ 1680x1050 65.29 59.954 146.25 -/+
VGA TEXT 720x400 31.469 70.087 28.322 -/+
640x480 35.000 66.667 30.240 -/-
832x624 49.725 74.500 57.283 -/-
Macintosh
1024x768 60.150 74.720 80.000 -/-
Downloaded from www.Manualslib.com manuals search engine