Product data sheet 3RT2016-1BB42

CONTACTOR, AC-3, 4KW/400V, 1NC, DC 24V,

3-POLE, SZ S00 SCREW TERMINAL
General technical data:
product brand name SIRIUS
Size of the contactor S00
Product extension
auxiliary switch Yes
function module for communication No
Protection class IP / on the front IP20
Protection against electrical shock finger-safe
Degree of pollution 3
Installation altitude / at a height over sea level / maximum m 2,000
Ambient temperature
during storage C -55 +80
during operating C -25 +60
Shock resistance
at rectangular impulse
at DC 6,7g / 5 ms, 4,2g / 10 ms
at sine pulse
at DC 10,5g / 5 ms, 6,6g / 10 ms
Impulse voltage resistance / rated value kV 6
Insulation voltage / rated value V 690
3RT2016-1BB42
Page 1/ 09/10/2014
subject to modifications
Copyright Siemens AG 2014 9
Maximum permissible voltage for protective separation / between coil
and main contacts / in accordance with EN 60947-1
V 400
Mechanical operating cycles as operating time
of the contactor / typical 30,000,000
of the contactor with added auxiliary switch block / typical 10,000,000
of the contactor with added electronics-compatible auxiliary
switch block / typical
5,000,000
Main circuit:
Number of NC contacts / for main contacts 0
Number of NO contacts / for main contacts 3
Connectable conductor cross-section / in main circuit
at AC-1
at 40 C / minimum permissible mm 4
at 60 C / minimum permissible mm 2.5
Operating current
at AC-1 / up to 690 V
at 40 C ambient temperature / rated value A 22
at 60 C ambient temperature / rated value A 20
at AC-2 / at 400 V / rated value A 9
at AC-3
at 400 V / rated value A 9
at 500 V / rated value A 7.7
at 690 V / rated value A 6.7
at AC-4 / at 400 V / rated value A 8.5
Operational current / for 200000 operating cycles / at AC-4
at 400 V / rated value A 4.1
at 690 V / rated value A 3.3
Operating current
with 1 current path / at DC-1
at 24 V / rated value A 20
at 110 V / rated value A 2.1
at 220 V / rated value A 0.8
at 440 V / rated value A 0.6
at 600 V / rated value A 0.6
with 2 current paths in series / at DC-1
at 24 V / rated value A 20
at 110 V / rated value A 12
at 220 V / rated value A 1.6
at 440 V / rated value A 0.8
at 600 V / rated value A 0.7
3RT2016-1BB42
Page 2/ 09/10/2014
subject to modifications
Copyright Siemens AG 2014 9
with 3 current paths in series / at DC-1
at 24 V / rated value A 20
at 110 V / rated value A 20
at 220 V / rated value A 20
at 440 V / rated value A 1.3
at 600 V / rated value A 1
Operating current
with 1 current path / at DC-3 / at DC-5
at 24 V / rated value A 20
at 110 V / rated value A 0.1
with 2 current paths in series / at DC-3 / at DC-5
at 24 V / rated value A 20
at 110 V / rated value A 0.35
with 3 current paths in series / at DC-3 / at DC-5
at 24 V / rated value A 20
at 110 V / rated value A 20
at 220 V / rated value A 1.5
at 440 V / rated value A 0.2
at 600 V / rated value A 0.2
Operating performance
at AC-1 / at 230 V / rated value kW 7.5
at AC-1 / at 400 V / rated value kW 13
at AC-1 / at 690 V / rated value kW 22
at AC-2
at 400 V / rated value kW 4
at AC-3
at 230 V / rated value kW 2.2
at 400 V / rated value kW 4
at 690 V / rated value kW 5.5
at AC-4
at 400 V / rated value kW 4
Operating performance / for 200000 operating cycles / at AC-4
at 400 V / rated value kW 2
at 690 V / rated value kW 2.5
Thermal short-time current / restricted to 10 s A 72
Active power loss / at AC-3 / at 400 V / with rated Operating current
value / per conductor
W 0.7
Off-load operating frequency
at DC 1/h 10,000
Frequency of operation
3RT2016-1BB42
Page 3/ 09/10/2014
subject to modifications
Copyright Siemens AG 2014 9
with AC-1 / maximum 1/h 1,000
with AC-2 / maximum 1/h 750
with AC-3 / maximum 1/h 750
with AC-4 / maximum 1/h 250
Control circuit/ Control:
Voltage type / of control feed voltage DC
Control supply voltage
for DC / rated value V 24
Operating range factor control supply voltage rated value / of the
magnet coil
for DC 0.8 1.1
Pull-in power / of the solenoid / for DC W 4
Holding power / of the solenoid / for DC W 4
Closing delay
at DC ms 30 100
Opening delay
at DC ms 7 13
Arcing time ms 10 15
Residual current / of electronics / for control with signal <0>
at 230 V / with AC / maximum permissible mA 3
at 24 V / with DC / maximum permissible mA 10
Auxiliary circuit:
Contact reliability / of the auxiliary contacts 1 faulty switching per 100 million (17 V, 1 mA)
Number of NC contacts / for auxiliary contacts / instantaneous
switching
1
Number of NO contacts / for auxiliary contacts / instantaneous
switching
0
Operating current
at AC-12 / maximum A 10
at AC-15
at 230 V / rated value A 10
at 400 V / rated value A 3
at 500 V / rated value A 2
at 690 V / rated value A 1
Operating current / at DC-12
at 24 V / rated value A 10
at 48 V / rated value A 6
at 60 V / rated value A 6
at 110 V / rated value A 3
3RT2016-1BB42
Page 4/ 09/10/2014
subject to modifications
Copyright Siemens AG 2014 9
at 125 V / rated value A 2
at 220 V / rated value A 1
at 440 V / rated value A 0.3
at 600 V / rated value A 0.15
Operating current / at DC-13
at 24 V / rated value A 10
at 48 V / rated value A 2
at 60 V / rated value A 2
at 110 V / rated value A 1
at 125 V / rated value A 0.9
at 220 V / rated value A 0.3
at 440 V / rated value A 0.14
at 600 V / rated value A 0.1
UL/CSA ratings:
yielded mechanical performance [hp]
for single-phase squirrel cage motors
at 110/120 V / rated value hp 0.33
at 230 V / rated value hp 1
for three-phase squirrel cage motors
at 200/208 V / rated value hp 2
at 220/230 V / rated value hp 3
at 460/480 V / rated value hp 5
at 575/600 V / rated value hp 7.5
Full-load current (FLA) / for 3-phase motor
at 480 V / rated value A 7.6
at 600 V / rated value A 9
Contact rating designation / for auxiliary contacts / according to UL A600 / Q600
Short-circuit:
Design of the fuse link
for short-circuit protection of the auxiliary switch / required fuse gL/gG: 10 A
for short-circuit protection of the main circuit
with type of assignment 1 / required gL/gG LV HRC 3NA, DIAZED 5SB, NEOZED 5SE: 35
A
at type of coordination 2 / required gL/gG LV HRC 3NA, DIAZED 5SB, NEOZED 5SE:
20A
Installation/ mounting/ dimensions:
mounting position +/-180 rotation possible on vertical mounting surface;
can be tilted forward and backward by +/- 22.5 on
vertical mounting surface
3RT2016-1BB42
Page 5/ 09/10/2014
subject to modifications
Copyright Siemens AG 2014 9
Mounting type screw and snap-on mounting onto 35 mm standard
mounting rail according to DIN EN 50022
Mounting type / series installation Yes
Width mm 45
Height mm 57.5
Depth mm 73
Distance, to be maintained, to the ranks assembly / sidewards mm 0
Connections/ terminals:
Design of the electrical connection
for main current circuit screw-type terminals
for auxiliary and control current circuit screw-type terminals
Type of the connectable conductor cross-section
for main contacts
solid or multi-stranded 2x (0,5 ... 1,5 mm), 2x (0,75 ... 2,5 mm), 2x 4 mm
finely stranded / with conductor end processing 2x (0.5 ... 1.5 mm), 2x (0.75 ... 2.5 mm)
for AWG conductors / for main contacts 2x (20 ... 16), 2x (18 ... 14), 2x 12
Type of the connectable conductor cross-section
for auxiliary contacts
solid or multi-stranded 2x (0,5 ... 1,5 mm), 2x (0,75 ... 2,5 mm), 2x 4 mm
finely stranded / with conductor end processing 2x (0.5 ... 1.5 mm), 2x (0.75 ... 2.5 mm)
for AWG conductors / for auxiliary contacts 2x (20 ... 16), 2x (18 ... 14), 2x 12
Safety related data:
B10 value / with high demand rate
according to SN 31920 1,000,000
T1 value / for proof test interval or service life
according to IEC 61508 a 20
Proportion of dangerous failures
with low demand rate / according to SN 31920 % 40
with high demand rate / according to SN 31920 % 73
Failure rate [FIT] / with low demand rate
according to SN 31920 FIT 100
Product function
mirror contact to IEC 60947-4-1 Yes
positively driven operation to IEC 60947-5-1 No
Certificates/ approvals:
3RT2016-1BB42
Page 6/ 09/10/2014
subject to modifications
Copyright Siemens AG 2014 9
General Product Approval Functional Safety /
Safety of Machinery
Declaration of
Conformity
Type Examination
Test Certificates
Special Test
Certificate
Type Test
Certificates/Test
Report
Shipping Approval
Shipping Approval other
Confirmation Environmental
Confirmations
Further information:
Information- and Downloadcenter (Catalogs, Brochures,)
http://www.siemens.com/industrial-controls/catalogs
Industry Mall (Online ordering system)
http://www.siemens.com/industrymall
Cax online generator
http://www.siemens.com/cax
Service&Support (Manuals, Certificates, Characteristics, FAQs,...)
http://support.automation.siemens.com/WW/view/en/3RT2016-1BB42/all
Image database (product images, 2D dimension drawings, 3D models, device circuit diagrams, ...)
http://www.automation.siemens.com/bilddb/cax_en.aspx?mlfb=3RT2016-1BB42
3RT2016-1BB42
Page 7/ 09/10/2014
subject to modifications
Copyright Siemens AG 2014 9
3RT2016-1BB42
Page 8/ 09/10/2014
subject to modifications
Copyright Siemens AG 2014 9
last change: Sep 2, 2014
3RT2016-1BB42
Page 9/ 09/10/2014
subject to modifications
Copyright Siemens AG 2014 9