Scribd
Upload
96 views8 pages

Corrdata Step Guide

1. This document provides a step-by-step guide for reading ER probe data using a Checkmate handheld unit and uploading the data to Corrdata Plus software. It outlines 41 steps for downloading probe data, checking the COM port, receiving data in Corrdata Plus, and exporting the data as CSV files. 2. Key steps include turning on the Checkmate, reading and saving the probe data, checking the COM port matches in Corrdata Plus preferences, receiving the data, exporting it as CSV files, and emailing the files. 3. The guide was created by Dean Smith on April 3, 2013 to assist with reading and uploading probe data from Total North Alwyn to their Corrdata

Uploaded by

cutefrenzy
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
96 views8 pages

Corrdata Step Guide

1. This document provides a step-by-step guide for reading ER probe data using a Checkmate handheld unit and uploading the data to Corrdata Plus software. It outlines 41 steps for downloading probe data, checking the COM port, receiving data in Corrdata Plus, and exporting the data as CSV files. 2. Key steps include turning on the Checkmate, reading and saving the probe data, checking the COM port matches in Corrdata Plus preferences, receiving the data, exporting it as CSV files, and emailing the files. 3. The guide was created by Dean Smith on April 3, 2013 to assist with reading and uploading probe data from Total North Alwyn to their Corrdata

Uploaded by

cutefrenzy
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 8

ROHRBACK COSASCO SYSTEMS

CHECKMATE / CORRDATA STEP GUIDE











Client: Total North Alwyn

Subject: Step Guide to ER Probe reading and uploading to Corrdata Plus






















1 INTRODUCTION

At the request of XXXXXXXX of XXXXXXX, RCS were requested to carry out an inspection of XXXXXXX.
The reported problem was XXXXXXX.








E-mail: [email protected] Website: www.cosasco.com
ISSUED BY: Dean Smith DATE OF ISSUE: 04/03/2013


Page 2 of 8

Probe Data Download using Checkmate:

1 Turn on Checkmate hand held unit.

2 Plug Checkmate into probe adaptor / probe cable.

3 Press F1 (READ)

4 Press F1 (PROBE)

5 Press F1 (ID)

6 Enter the Probe ID number and Press F1 (ENTER)

7 Press F1 (START)

8 The probe DIV and CHECK readings will be displayed (With initial CHECK reading in brackets)

9 To read the probe Press F1 (READ)

10 To save the reading Press F3 (SAVE)

11 To exit Press F4

12 Turn off HHU

Transfer Probe Data to Corrdata Plus:

13 Plug in Checkmate into computer with Corrdata Plug Program

14 Open Corrdata Plus Program

15 Click Windows Start Button

16 Right Click on Computer and click on Properties

17 Click Device manager on the left hand side


ISSUED BY: Dean Smith DATE OF ISSUE: 04/03/2013


Page 3 of 8


18 Check the COM port



19 Click on Open an Existing Site in Corrdata Plus



20 Click the Preferences Tab then Settings
ISSUED BY: Dean Smith DATE OF ISSUE: 04/03/2013


Page 4 of 8


21 Check COM port matches



22 If COM port matches proceed to step 25

23 If COM port doesnt match, change the COM port to the correct one

24 Press save then restart the Corrdata Plus software

25 Select platform (Alwyn) from list of existing sites.

26 Click on icon of a computer with a red arrow (receive data)


ISSUED BY: Dean Smith DATE OF ISSUE: 04/03/2013


Page 5 of 8


27 Select Device (Mate)

28 Select Method (Checkmate)




29 Select to Group and choose where to Receive Data

30 Turn on Checkmate

31 Press F3 (Dump)

32 Press F1 (Start)

33 Quickly click Read from Device on Computer.

ISSUED BY: Dean Smith DATE OF ISSUE: 04/03/2013


Page 6 of 8


34 Turn off Checkmate once download is complete.

35 Click on the Accept All tab and select yes


Exporting data
36 Click the Export button. (Box with Blue Arrow Pointing Up)
























ISSUED BY: Dean Smith DATE OF ISSUE: 04/03/2013


Page 7 of 8

37 Click on CSV Format




38 Select Group of Probes to be Exported







ISSUED BY: Dean Smith DATE OF ISSUE: 04/03/2013


Page 8 of 8


39 Click Export and click Yes.



40 Find the .CSV files at C:\Program Files (x86)\RCS\CORRDATA PLUS you have just exported and save them onto
the desktop. (Depending on your computer you might need to click on the compatibility tab to find your desired
excel files)

41 Email files to desired person.

You might also like