Project Document No.

A.F.E. No.
Client
Project Number
Plant / Area
Equipment Service
Equipment No.
1 APPLICABLE TO: PROPOSAL PURCHASE AS BUILT DATE REVISION
2 FOR UNIT
3 SITE SERIAL NO.
4 SERVICE NO. REQUIRED
5 MANUFACTURER MODEL DRIVER (6.1)
6 NOTE: INDICATES INFORMATION TO BE COMPLETED BY PURCHASER BY MANUFACTURER
OPERATING CONDITIONS
! NORMAL MA"IMUM OTHER CONDITIONS (5.1.4)
# ALL DATA ON PER UNIT BASIS (3.33 $ 5.1.3) A B C D
1%
11 (5.1.4)
12 &AS HANDLED (ALSO SEE PA&E 2)
13 R'()*+', C-.-/*01 MMSCFD2SCFM (14. PSIA $ 6%3F DRY) (3.46 $ 3.6%)
14 4EI&HT FLO45 6782MIN (4ET)(DRY)
15 INLET CONDITIONS: COMPRESSOR INLET FLAN&E CUSTOMER CONNECTION
16 PRESSURE (PSIA)
1 TEMPERATURE (3F)
1! RELATIVE HUMIDITY (9)
1# MOLECULAR 4EI&HT (M)
2%
21
22 INLET VOLUME FLO4 (CFM:4ET) (3.1#)
23 DISCHARGE CONDITIONS: COMPRESSOR DISCHAR&E FLAN&E CUSTOMER CONNECTION
24 PRESSURE (PSIA)
25 TEMPERATURE (3F)
26
2
2! DE4 POINT (3F)
2# OIL CARRYOVER (PPM;BY 4T<)
3% BHP REQUIRED (ALL LOSSES INCL)
31 SPEED (RPM)
32 PRESSURE RATIO (R)
33 VOLUMETRIC EFFICIENCY (9)
34 (6.#.3)
35 SETTLE OUT PRESSURE (PSIA) (5.1.5)
36 PERFORMANCE CURVE NO.
3
3! PROCESS CONTROL: (6.4.2.1)
3# METHOD: SLIDE VALVE
4% BYPASS FROM TO
41 BYPASS: MANUAL AUTO
42 SPEED VARIATION FROM TO
43 OTHER
44 SI&NAL: SOURCE
45 TYPE
46 RAN&E: FOR PNEUMATIC CONTROL RPM = PSI& $ RPM = PSI&
4 OTHER
4! SERVICE: SPECIAL PURPOSE (3.5!) &ENERAL PURPOSE (3.15)
4# CONTINUOUS INTERMITTENT STANDBY (3.62) DRY SCRE4 (3.#) FLOODED SCRE4 (3.12)
5% REMARKS:
51
52
REVISION LOG
REV DESCRIPTION DATE CREATED BY CHECKED BY APPROVED BY
MECHANICAL DATA SHEET
ROTARY COMPRESSOR
API 619 - 4TH EDITION
CERTIFIED POINT ()
C.2C> (?
1
) OR (?
AV&
) (5.1.15.4)
COMPRESSIBILITY (@
1
) OR (@
AV&
) (5.1.15.5)
C.2C> (?
2
) OR (?
AV&
)
COMPRESSIBILITY (@
2
) OR (@
AV&
)
SILENCER P (PSI)
Project Document No.
A.F.E. No.
Client
Project Number
Plant / Area
Equipment Service
Equipment No.
1 &AS ANALYSIS (5.1.15.4) NOR: MA": OTHER CONDITIONS REMAR?S (5.1.2)
2 MOL 9 MAL IMUM A B C D
3 M.4.
4 AIR 2!.#66
5 O"Y&EN 32.%%%
6 NITRO&EN 2!.%16
4ATER VAPOR 1!.%16
! CARBON MONO"IDE 2!.%1%
# CARBON DIO"IDE 44.%1%
1% HYDRO&EN SULFIDE 34.%6 (5.11.1.1%)
11 HYDRO&EN 2.%16
12 METHANE 16.%42
13 ETHYLENE 2!.%52
14 ETHANE 3%.%6!
15 PROPYLENE 42.%!
16 PROPANE 44.%#4
1 6:BUTANE 5!.12%
1! A:BUTANE 5!.12%
1# 6:PENTANE 2.146
2% A:PENTANE 2.146
21 HE"ANE PLUS
22
23
24 CORROSIVE (5.11.1.)
25 SOLID PARTICLE (5.1.25)
26 LIQUID PARTICLE (5.1.25)
2 NACE MATERIALS (5.11.1.1%)
2! TOTAL
2# AV&. MOL. 4T.
3% SITE DATA: NOISE SPECIFICATIONS: (5.1.19)
31 APPLICABLE TO MACHINE
32 LOCATION: (5.1.1) SEE SPECIFICATION
33 INDOOR HEATED UNDER ROOF APPLICABLE TO NEI&HBORHOOD
34 OUTDOOR UNHEATED PARTIAL SIDES SEE SPECIFICATION
35 &RADE ME@@ANINE ACOUSTIC HOUSIN&: (5.1.2%.1) YES NO
36 4INTERI@ATION REQBD. TROPICALI@ATION REQBD. SOUND LEVEL ,B = FT.
3 ELEVATION FT. BAROMETER PSIA ,B RE: 2% MICRO PASCAL
3! RAN&E OF AMBIENT TEMPS.: APPLICABLE SPECIFICATIONS:
3# DRY BULB 4ET BULB API 61# POSITIVE DISPLACEMENT ROTARY COMPRESSORS
4% SITE RATED 3F ACOUSTIC
41 NORMAL 3F MOTOR
42 MA"IMUM 3F
43 MINIMUM 3F
44 ELECTRICAL AREA CLASSIFICATION: (5.1.1)
45 AREA: CL. &R. DIV.
46 UNUSUAL CONDITIONS: DUST FUMES PAINTING:
4 OTHER MANUFACTURERBS STD.
4! OTHER
4#
5% SHIPMENT: (!.4.1)
51 DOMESTIC E"PORT E"PORT BO"IN& REQBD
52 VENDOR HAVIN& UNIT RESPONSIBILITY: (3.56) LON& TERM STORA&E FOR MONTHS
53
MECHANICAL DATA SHEET
ROTARY COMPRESSOR
API 619 - 4TH EDITION
54
REMAR?S (5.1.2)
Project Document No.
A.F.E. No.
Client
Project Number
Plant / Area
Equipment Service
Equipment No.
1 SPEEDS: SHAFT: (5.5.1.2)
2 MA". CONT. (3.26) RPM TRIP (3.64) RPM MATERIAL
3 MA". TIP SPEEDS: FPS = MA". OPER. SPEED DIA = ROTORS (IN.) DIA = COUPLIN& (IN.)
4 MIN. ALLO4 (3.3%) RPM SHAFT END. TAPERED CYLINDRICAL (5.5.1.5 $ 5.5.1.6)
5 LATERAL CRITICAL SPEEDS: (5..1.4)
6 FIRST CRITICAL RPM SHAFT SLEEVES:
DAMPED UNDAMPED AT SHAFT SEALS MATL.
! MODE SHAPE
# LATERAL CRITICAL SPEED : BASIS:
1% DAMPED UNBALANCE RESPONSE ANALYSIS TIMING GEARS: (5.5.2)
11 PITCH LINE DIAMETER (IN.) MALE: FEMALE:
12 OTHER TYPE ANALYSIS: (SPECIFY) MATERIAL
13 POCKET PASSING FRE"UENC#: HC SHAFT SEALS: (5.6)
14 TORSIONAL CRITICAL SPEEDS: (5.!.2)
15 FIRST CRITICAL RPM SEAL SYSTEM TYPE (5.6.1.)
16 SECOND CRITICAL RPM OIL LEA?A&E &UAR. (&AL2DAY2SEAL)
1 TYPE BUFFER &AS (5.6.2.2)
1! BUFFER &AS FLO4 (PER SEAL)
1# HOUSIN& IPS RMS NORMAL: D2MIN = PSI
2% SHAFT MA".: D2MIN = PSI
21 BEARING HOUSING: (5.9)
22 ROTATION$ VIE%ED FROM COMPRESSOR DRIVEN END: C4 CC4 TYPE (SEPARATE5 INTE&RAL) SPLIT
23 CASING: MATERIAL
24 MODEL
25 CASIN& SPLIT TYPE SPAN (IN.)
26 MATERIAL CLADDIN& (5.2.1%) LOADIN& (PSI): ACT. ALLO4.
2 OPERATION: DRY FLOODED5 E2 LIQUID NO. PADS ROTOR ON OR BET4EEN
2! THIC?NESS (IN.) CORR. ALLO4 (IN.) PAD MATERIAL
2# MA". ALLO4ABLE 4OR? PRESS. (3.25) PSI& TYPE BABBITT THIC?NESS
3% RELIEF VALVE SETTIN& PSI& TEMP SENSORS (5.!.1.5)
31 LEA? TEST &AS: PRESS.(PSI&) (.3.4.3.1) TC RTD TYPE
32 MAR&IN FOR ACCUMULATION PSI& NO PER BR&
33 TEST PRESS. (PSI&) HELIUM (.3.4.6) HYDRO (.3.2) ROLLING ELEMENT RADIAL BEARING (5..2)
34 MA". ALLO4. TEMP. 3F MIN. OPER. TEMP. 3F TYPE: N,F:
35 COOLIN& GAC?ET YES NO ENER&Y DENSITY:
36 ROTORS: (5.5.1)
3 DIAMETER (IN.): MAIL: FEMALE: TYPE
3! NO. LOBES: MALE FEMALE MFR.
3# TYPE: LOADIN& (PSI): ACT. ALLO4.
4% TYPE FABRICATION NUMBER OF PADS
41 MATERIAL PAD MATERIAL
42 MA". YIELD STREN&TH (PSI) TYPE BABBITT THIC?NESS
43 BRINELL HARDNESS. MA". MIN. TEMP SENSORS (5.!.1.5)
44 ROTOR LEN&TH TO DIAMETER RATIO (L2D) M: TC RTD TYPE
45 ROTOR CLEARANCE (IN.) NO PER BR& ACTIVE INACTIVE
46 ROLLING ELEMENT THRUST BEARING (5..2)
4 INTERNALLY COOLED UNCOOLED TYPE: N,F:
4! ENER&Y DENSITY:
MECHANICAL DATA SHEET
ROTARY COMPRESSOR
API 619 - 4TH EDITION
VIBRATION: (5..3.6)
H#DROD#NAMIC RADIAL BEARINGS: (IDENTIFY HI&HEST LOADED BEARIN&)
AREA (IN.
2
)
H#DROD#NAMIC THRUST BEARING: (IDENTIFY HI&HEST LOADED BEARIN&)
AREA (IN.
2
)
DIA = COUPLIN& (IN.)
CYLINDRICAL (5.5.1.5 $ 5.5.1.6)
FEMALE:
ALLO4.
PADS
(IN.)
ALLO4.

(IN.)
INACTIVE
(IDENTIFY HI&HEST LOADED BEARIN&)
(IDENTIFY HI&HEST LOADED BEARIN&)
Project Document No.
A.F.E. No.
Client
Project Number
Plant / Area
Equipment Service
Equipment No.
1 PROCESS CONNECTIONS & COMPRESSOR CASING: (5.') A(IAL POSITION DETECTOR: (6.4.4.2.')
2 SI@E ANSI +-0*AH F-/*AH O+*'A0-0*IA IN ACCORDANCE 4ITH: API 6%
3 OTHER (SPECIFY)
4 CASIN& (5.3) TYPE MODEL
5 INLET MFR. NO. REQBD
6 DISCHAR&E OSCILLATOR:DETECTORS SUPPLIED BY
PROCESS CONNECTIONS & CUSTOMER INTERFACE: MFR. MODEL
! INLET MONITOR SUPPLIED BY
# DISCHAR&E LOCATION ENCLOSURE
1% CASING & ALLO%ABLE PIPING FORCES AND MOMENTS: MFR. MODEL
11 (5.4) INLET DISCHAR&E SCALE RAN&E ALARM: SET =
12 FORCE MOMT FORCE MOMT FORCE MOMT SHUTDO4N: SET = TIME DELAY SEC
13 LB FT:LB LB FT:LB LB FT:LB
14 A"IAL " COUPLINGS: (6.2)
15 VERTICAL Y IN ACCORDANCE 4ITH: API 61
16 HORI@. #%3 @ OTHER (SPECIFY)
1 FORCE MOMT FORCE MOMT FORCE MOMT
1! LB FT:LB LB FT:LB LB FT:LB DRIVER:COMP
1# A"IAL " OR
2% VERTICAL Y DRIVER &EAR:COMP
21 HORI@. #%3 @ MA?E
22 OTHER CONNECTIONS: MODEL
23 SERVICE: NO SI@E TYPE2RATIN&
24 LUBE OIL INLET MOUNT CPL&. HALVES
25 LUBE OIL OUTLET SPACE REQUIRED
26 SEAL OIL INLET LIMITED END FLOAT REQBD
2 SEAL OIL OUTLET MOMENT SIMULATOR REQBD
2! CASIN& DRAINS (4.3.4) CPL&. RATIN& (HP21%% RPM)
2# VENTS ?EYED (1) OR (2) OR HYDR. FIT
3% COOLIN& 4ATER INLET BASEPLATE ) SOLEPLATES: (6.'.2 ) 6.'.')
31 COOLIN& 4ATER OUTLET SOLE PLATES FOR: COMPRESSOR &EAR DRIVER
32 LIQUID INGECTION BASEPLATE:
33 OIL INGECTION COMMON (UNDER COMP. &EAR $ DRIVER)
34 PUR&E FOR: UNDER COMP. ONLY OTHER
35 BR&. HOUSIN& DEC?ED 4ITH NON:S?ID DEC? PLATE OPEN CONSTR.
36 BET4EEN BR&. $ SEAL DRIP RIM 4ITH OPEN DRAIN SUBPLATE
3 BET4EEN SEAL $ &AS HORI@ONTAL ADGUSTIN& SCRE4S FOR EQUIPMENT
3! OTHER SUITABLE FOR COLUMN SUPPORT (6.3.2.4)
3# SUITABLE FOR PERIMETER SUPPORT
4% VIBRATION DETECTORS: (6.4.4.5) EPO"Y &ROUT2EPO"Y PRIMER (6.3.1.)
41 IN ACCORDANCE 4ITH: API6% LUBE OIL S#STEM (5.1*)
42 TYPE: SEISMIC DISPLACEMENT LUBRICANT MANUFACTURER
43 MODEL LUBRICANT TYPE &RADE(ISO 344!)
44 MFR. 614 LUBE OIL SYSTEM (5.1%.2.3 $ 5.1%.35 APPEND*":D))
45 NO. AT EACH SHAFT2HOUSIN& TOTAL NO. COMMON (5.1%.2.1) DEDICATED SYSTEM
46 OSCILLATOR:DETECTORS SUPPLIED BY OIL FILTER (5.1%.3.6)
4 MFR. MODEL OIL COOLER (5.1%.3.!) TYPE NO:
4! MONITOR SUPPLIED BY OIL PUMP (5.1%.3.#) TYPE NO:
4# LOCATION ENCLOSURE OIL SEPARATOR (5.1%.3.1%)
5% MFR. MODEL TYPE NO:
51 SCALE RAN&E ALARM. SET = MILS OIL CARRYOVER (PPM:BY 4T.) (&AL2DAY)
52 SHUTDN: SET = MILS TIME DLY. SEC RETENSION TIME (MIN)
53 PHASE REFERENCE TRANSDUCER RELIEF VALVE LEVEL &AU&E
54 LEVEL S4ITCH PRESSURE INDICATOR
55 PRESSURE INDICATOR ELECTRIC HEATER
MECHANICAL DATA SHEET
ROTARY COMPRESSOR
API 619 - 4TH EDITION
Project Document No.
A.F.E. No.
Client
Project Number
Plant / Area
Equipment Service
Equipment No.
1 UTILIT# CONDITIONS: %EIGHTS (LBS):
2 STEAM DRIVERS HEATIN& COMPR. &EAR DRIVER BASE
3 INLET MIN. PSI& 3F PSI& 3F ROTORS: COMPR. DRIVER &EAR
4 NORM PSI& 3F PSI& 3F COMPR. UPPER CASE
5 MA". PSI& 3F PSI& 3F L.O. CONSOLE S.O. CONSOLE
6 E"HAUST MIN. PSI& 3F PSI& 3F MA". FOR MAINTENANCE (IDENTIFY)
NORM PSI& 3F PSI& 3F TOTAL SHIPPIN& 4EI&HT
! MA". PSI& 3F PSI& 3F
# ELECTRICITY: SHUT: SPACE RE"UIREMENTS (FEET ) INCHES):
1% DRIVERS HEATIN& CONTROL DO4N COMPLETE UNIT L 4 H
11 VOLTA&E L.O. CONSOLE: L 4 H
12 HERT@ S.O. CONSOLE: L 4 H
13 PHASE
14 COOLING %ATER MISCELLANEOUS:
15 TEMP. INLET 3F MA". RETURN 3F RECOMMEND STRAI&HT RUN OF PIPE DIA. BEFORE SUCTION
16 PRESS. NORM PSI& DESI&N PSI& VENDORBS REVIE4 $ COMMENTS ON PURCHASERBS PIPIN&
1 MIN. RETURN PSI& PSI $ FOUNDATION (5.1.16)
1! 4ATER SOURCE VENDOR REPRESENTATIVE OBSERVATION AT THE SITE (5.1.1)
1# INSTRUMENT AIR: OPTICAL ALI&NMENT FLATS REQUIRED ON COMPRESSOR5
2% MA" PRESS PSI& MIN. PSI& &EAR $ DRIVER
21 TOTAL UTILIT# CONSUMPTION: LATERAL ANALYSIS REPORT REQUIRED (5..1.4)
22 COOLIN& 4ATER &PM TORSIONAL ANALYSIS REPORT REQUIRED (5..2.1)
23 STEAM5 NORMAL D2HR CASIN& MOUNTED TORSIONAL VIBRATION PIC?UP
24 STEAM5 MA" D2HR COORDINATION MEETIN& (!.1.3)
25 INSTRUMENT AIR SCFM
26 HP (DRIVER) HP
2
2!
2#
3% SHOP INSPECTION AND TESTS: (!.1) REQBD 4ITNESS OBSERVE INLET ) DISCHARGE DEVICES:
31 SHOP INSPECTION (.1.5) HI&H EFFICIENCY INLET SEPARATOR REQUIRED (6.!.2)
32 HYDROSTATIC (.3.2) INLET AIR FILTER DP INDICATION TYPE (6..3)
33 HELIUM LEA? (.3.4.6) PULSATION SUPPRESSORS FURNISHED BY
34 MECHANICAL RUN (.3.3) SPARE PARTS TO BE SUPPLIED (!.2.3F)
35 MECHANICAL RUN SPARE ROTORS (.3.3.4.2) ROTOR ASSEMBLY
36 CASIN& LEA? TEST (.3.3.4.3) SEALS &AS?ETS5 O:RIN&S
3 PERFORMANCE TEST (&AS) (AIR) (.3.4.1) START:UP2COMMISSIONIN&
3! COMPLETE UNIT TEST (.3.4.2) 2 YEARS SUPPLY
3# USE SHOP LUBE $ SEAL SYSTEM OTHER:
4% USE GOB LUBE $ SEAL SYSTEM (.3.4.!)
41 USE SHOP VIBRATION PROBES5 ETC. REMARKS:
42 USE GOB VIB. $ A"IAL DISP. PROBES5
43 USE SEISMIC TRANSDUCERS $ MONITORS
44 USE GOB MONITORIN& EQUIPMENT
45 PRESSURE COMP. TO FULL OPER. PRESS.
46 DISASSSEMBLE:REASSEMBLE COMP.
4 AFTER TEST (.3.4.#)
4! SOUND:LEVEL TEST (.3.4.)
4# TANDEM (.3.4.4)
5% AU". EQUIPMENT (.3.4.!)
51 FULL:LOAD TEST (.3.4.1%)
52 RESIDUAL UNBALANCE CHEC? (5..3.5)
MECHANICAL DATA SHEET
ROTARY COMPRESSOR
API 619 - 4TH EDITION
MA". ALLO4 P
53
BASE
&EAR
Project Document No.
A.F.E. No.
Client
Project Number
Plant / Area
Equipment Service
Equipment No.
VENDOR MUST FURNISH ALL PERTINENT DATA FOR THIS SPECIFICATION SHEET BEFORE RETURNIN&.
ITEM NO. SERVICE GOB NO.
MANUFACTURER
1 REFERENCE SPECIFICATIONS: (6.4.1.2) APPLICATION SPECIFICATIONS: IEC
2 API 614 YES NO AREA CLASSIFICATION:
3 AREA: CL. &R. DIV. NON:HA@ARDOUS
4 MOTOR CONTROL ) INSTRUMENT VOLTAGE:
5 VOLTS PHASE CYCLES
6 ALARM ) SHUTDO%N VOLTAGE:
VOLTS PHASE CYCLES OR
! LOCAL CONTROL PANEL: (6.4.')
# FURNISHED BY: VENDOR PURCHASER OTHERS
1% FREE STANDIN& 4EATHERPROOF TOTALLY ENCLOSED E"TRA CUTOUTS
11 VIBRATION ISOLATORS STRIP HEATERS PUR&E CONNECTIONS
12 ANNUNCIATOR: FURNISHED BY: VENDOR PURCHASER OTHERS
13 ANNUNCIATOR LOCATED ON LOCAL PANEL MAIN CONTROL BOARD
14 CUSTOMER CONNECTIONS BROU&HT OUT TO TERMINAL BO"ES BY VENDOR
15 INSTRUMENT SUPPLIERS:
16 PRESSURE &AU&ES: MFR. SI@E $ TYPE:
1 TEMPERATURE &AU&ES: MFR. SI@E $ TYPE:
1! LEVEL &AU&ES: MFR. SI@E $ TYPE:
1# DIFF. PRESSURE &AU&ES: MFR. SI@E $ TYPE:
2% PRESSURE S4ITCHES: MFR. SI@E $ TYPE:
21 DIFF. PRESSURE S4ITCHES: MFR. SI@E $ TYPE:
22 TEMPERATURE S4ITCHES: MFR. SI@E $ TYPE:
23 LEVEL S4ITCHES: MFR. SI@E $ TYPE:
24 CONTROL VALVES: MFR. SI@E $ TYPE:
25 PRESSURE RELIEF VALVES: (6.4.4.5) MFR. SI@E $ TYPE:
26 THERMAL RELIEF VALVES: (6.4.4.5.4) MFR. SI@E $ TYPE:
2 FLO4 INDICATORS: (6.4.4.!) MFR. SI@E $ TYPE:
2! &AS FLO4 INDICATOR: MFR. SI@E $ TYPE:
2# VIBRATION EQUIPMENT: MFR. SI@E $ TYPE:
3% TACHOMETER: (6.4.4.2) MFR. RAN&E $ TYPE:
31 SOLENOID VALVES MFR. SI@E $ TYPE:
32 ANNUNCIATOR: (6.4.5.#) MFR. MODEL $ NO. POINTS
33 DEPRESSURI@ATION VALVE (6.4.4.6) MFR. SI@E $ TYPE:
34 MFR. SI@E $ TYPE:
35 NOTE: SUPPLIED BY VENDOR SUPPLIED BY PURCHASER
36 PRESSURE &AU&E REQUIREMENTS LOCALLY LOCAL LOCALLY
3 FUNCTION MOUNTED (3.21) PANEL (3.3!) FUNCTION MOUNTED (3.21)
3! LUBE OIL PUMP DISCHAR&E &OV. CONTROL OIL
3#
4% LUBE OIL SUPPLY MAIN STEAM IN
41 SEAL OIL PUMP DISCHAR&E 1ST STA&E STEAM
42 STEAM CHEST
43 SEAL OIL SUPPLY (EACH LEVEL) E"HAUST STEAM
44 SEAL OIL DIFFERENTIAL E"TRACTION STEAM
45 REFERENCE &AS STEAM EGECTOR
46 BALANCE LINE COMPRESSOR SUCTION
4 SEAL EDUCTOR COMPRESSOR DISCHAR&E
4! BUFFER SEAL
4# OIL2&AS COALESCIN& FILTER D P
MECHANICAL DATA SHEET
ROTARY COMPRESSOR
API 619 - 4TH EDITION
LUBE OIL FILTER P &OV. CONTROL OIL P
SEAL OIL FILTER P
NEMA
NON:HA@ARDOUS
CYCLES OR DC
LOCAL
PANEL (3.3!)
Project Document No.
A.F.E. No.
Client
Project Number
Plant / Area
Equipment Service
Equipment No.
VENDOR MUST FURNISH ALL PERTINENT DATA FOR THIS SPECIFICATION SHEET BEFORE RETURNIN&.
ITEM NO. SERVICE GOB NO.
MANUFACTURER
1 TEMPERATURE GAUGE RE"UIREMENTS:
2 LOCALLY LOCAL LOCALLY LOCAL
3 FUNCTION MOUNTED (3.21) PANEL (3.3!) FUNCTION MOUNTED (3.21) PANEL (3.3!)
4 LUBE OIL DISCHAR&E FROM EA. COOLER OIL INLET $ OUTLET
5 COMPR. GOURNAL BEARIN& SEAL OIL OUTLET
6 DRIVER GOURNAL BEARIN& COMPRESSOR SUCTION
&EAR GOURNAL BEARIN& COMPRESSOR DISCHAR&E
! COMPRESSOR THRUST BEARIN& LUBE OIL RESERVOIR
# DRIVER THRUST BEARIN& LUBE OIL SUPPLY
1% &EAR THRUST BEARIN&
11 MISCELLANEOUS INSTRUMENTATION:
12 DRIVER START2STOP LOCAL PANEL SEPARATE PANEL MAIN BOARD
13 SI&HT FLO4 INDICATORS5 EACH GOURNAL $ THRUST BEARIN& $ EACH COUPLIN& OIL RETURN LINE
14 SI&HT FLO4 INDICATORS5 EACH SEAL OIL RETURN LINE
15 LEVEL &AU&ES5 LUBE AND2OR SEAL OIL RESERVOIR5 S.O. DRAIN TRAPS $ S.O. OVERHEAD TAN?
16 VIBRATION AND SHAFT POSITION PROBES $ PRO"IMITORS
1 VIBRATION AND SHAFT POSITION READOUT EQUIPMENT
1! VIBRATION READOUT LOCATED ON: LOCAL PANEL SEPARATE PANEL MAIN BOARD
1# TURBINE SPEED PIC?UP DEVICES
2% TURBINE SPEED INDICATORS
21 TURBINE SPEED INDICATORS LOCATED ON: LOCAL PANEL MAIN BOARD
22 REMOTE HAND SPEED CHAN&ER : MOUNTED ON LOCAL PANEL
23 ALARM HORN $ AC?NO4LED&MENT S4ITCH
24 ALARM ) SHUTDO%N S%ITCHES: (6.4.5.2) PRE:
25 FUNCTION ALARM TRIP FUNCTION ALARM TRIP
26 LO4 LUBE OIL PRESSURE TURBINE VIBRATION
2 TURBINE A"IAL POSITION
2! &EAR VIBRATION
2# LO4 LUBE OIL RESERVOIR LEV. &EAR A"IAL POSITION
3% LO4 SEAL OIL RESERVOIR LEV. COMPRESSOR MOTOR SHUTDO4N
31 HI SEAL OIL LEVEL TRIP $ THROTTLE VALVE SHUT
32 LO4 SEAL OIL LEVEL HI TURB. STEAM SEAL LEA?A&E
33 HI SEAL OIL PRESSURE HI COMPR. THRUST BR&. TEMP.
34 LO4 SEAL OIL PRESSURE HI COMPR. GOURNAL BR&. TEMP.
35 AU". SEAL OIL PUMP START HI DRIVER THRUST BR&. TEMP.
36 AU". LUBE OIL PUMP START HI DRIVER GOURNAL BR&. TEMP.
3 HI SEAL OIL OUTLET TEMP. (COOLER) HI&H &EAR THRUST BR&. TEMP.
3! HI LIQUID LEV. SUCT. SEPARATOR HI&H &EAR GOURNAL BR&. TEMP.
3# COMPRESSOR VIBRATION
4% COMPRESSOR HI DISCH. TEMP. LO4 SEAL &AS PRESSURE
41 COMPRESSOR A"IAL POSITION HI COALESCIN& &AS2OIL FILTER D P
42 HI LUBE OIL SUPPLY TEMPERATURE
43
44 CONTACTS:
45 ALARM CONTACTS SHALL: OPEN CLOSE TO SOUND ALARM AND BE NORMALLY ENER&I@ED DE:ENER&I@ED
46 SHUTDO4N CONTACTS SHALL: OPEN CLOSE TO TRIP AND BE NORMALLY ENER&I@ED DE:ENER&I@ED
4 NOTE: NORMAL CONDITION IS 4HEN COMPRESSOR IS IN OPERATION.
4! MISCELLANEOUS:
4# INSTRUMENT TA&&IN& REQUIRED.
5% ALARM AND SHUTDO4N S4ITCHES SHALL BE SEPARATE.
51 PURCHASERS ELECTRICAL AND INSTRUMENT CONNECTIONS 4ITHIN THE CONFINES OF THE BASEPLATE AND CONSOLE SHALL
52 BE: BROU&HT OUT TO TERMINAL BO"ES. MADE DIRECTLY BY THE PURCHASER.
53 COMMENTS RE&ARDIN& INSTRUMENTATION:
MECHANICAL DATA SHEET
ROTARY COMPRESSOR
API 619 - 4TH EDITION
HI LUBE OIL FILTER P
HI SEAL OIL FILTER P
COMPRRESSOR P
54
DE:ENER&I@ED
Project Document No.
A.F.E. No.
Client
Project Number
Plant / Area
Equipment Service
Equipment No.
1 APPLICABLE TO: PROPOSAL PURCHASE AS BUILT
2 FOR UNIT
3 SITE DRIVEN EQUIP.
4 SERVICE NO. REQURED
5 MANUFACTURER MODEL SERIAL NO.
6 NOTE: INDICATES INFORMATION TO BE COMPLETED BY PURCHASER BY MANUFACTURER

! MOTOR DESI&N DATA MOTOR DESI&N DATA (CONTBD)

# APPLICABLE SPECIFICATIONS: STARTING: (6.2.1.1+)
1% IEC NEMA FULL VOLTA&E REDUCED VOLTA&E
11 API 541 (6.1.2.2) LOADED UNLOADED
12 VOLTA&E DIP 9
13 SITE DATA: VIBRATION:
14 AREA: CL. &R. DIV. NON:HA@ARDOUS IEC STANDARD NEMA STANDARD
15 ALT. FT. AMB. TEMPS: MA". 3F5 MIN 3F NOISE:
16 UNUSUAL CONDITIONS: DUST FUMES IEC STANDARD NEMA STANDARD
1 OTHER ACCESSORY EQUIPMENT
1! DRIVE S#STEM: DIRECT CONNECTED BASEPLATE SOLEPLATE STATOR SHIFT
1# &EAR MFR. STD. FANS NON:SPAR?IN& FANS
2% OTHER D.C. E"CITATION:
21 T#PE MOTOR: (6.1.2.1) ?4 REQD VOLTS
22 SQUIRREL CA&E INDUCTION NEMA DESI&N BY: PURCHASER MANUFACTURER
23 SYNCHRONOUS DESCRIPTION
24 PO4ER FACTOR REQD. ENCLOSED COLLECTOR RINGS:
25 E"CITATION: BRUSHLESS SLIP RIN& PUR&ED: MEDIUM PRESS.
26 FIELD DISCHAR&E RESISTOR BY MOTOR MFR. E"PLOSION:RESISTANT NON:PUR&ED
2 4OUND ROTOR INDUCTION FORCED VENTILATION
2! CFM PRESS. DROP
2# ENCLOSURE: (6.1.2.1.,) BEARING TEMP DEVICES:
3% LOCATION
31 TEFC DESCRIPTION
32 TE4AC TEI&F5 USIN& &AS SET = 3F FOR ALARM 3F FOR SHUTDO4N
33 DOUBLE 4ALL CARBON STEEL TUBES SPACE HEATERS:
34 4ATER SUPPLY: PRESS. PSI& TEMP. 3F ?4 VOLTS PHASE
35 PSI $ TEMP. RISE 3F MA". SHEATH TEMP. 3F
36 4ATER SIDE MIN. CORR. ALLO4. IN. %INDING TEMPERATURE DETECTORS:
3 AND FOUL FACTOR THERMISTORS: NO.2PHASE
3! (AIR) (&AS) SUPPLY PRESS. PSI& TYPE: POS. TEMP. COEFF. NE&. TEMP. COEFF.
3# TEMPERATURE S4ITCH: YES NO
4% 4EATHER PROTECTED5 TYPE RESISTANCE TEMPERATURE DETECTORS: NO.2PHASE
41 FORCED VENTILATED RESISTANCE MATL.
42 OPEN:DRIPPROOF SELECTOR S4ITCH $ INDICATOR BY: PURCHR.
43 OPEN MA". STATOR 4INDIN& TEMPS:
44 EEJ' EEJ.' 3F FOR ALARM 3F FOR SHUTDO4N
45 EEJ,(') EEJAA2EJN %INDING TEMP. DETECTOR ) SPACE HEATER LEADS:
46 BASIC DATA: IN SAME CONDUIT BO"
4 VOLTS PHASE HERT@ IN SEPARATE CONDUIT BO"ES
4! NAMEPLATE HP SERVICE FACTOR (6.2.2.1.H) MOTOR ARRANGED FOR DIFFERENTIAL PROTECTION:
4# SYNCHRONOUS RPM SELF:BALANCE PRIMARY CURRENT METHOD
5% INSULATION: CLASS TYPE C.T. DESCRIPTION
MECHANICAL DATA SHEET
ROTARY COMPRESSOR
API 619 - 4TH EDITION
IN. H
4ATER ALLO4. P
51 TEMP. RISE: 3F ABOVE 3F BY E"TENDED LEADS LEN&TH
52 SURGE CAPACITORS
MOTOR DESI&N DATA (CONTBD)
9
ACCESSORY EQUIPMENT
STATOR SHIFT
PSI&
3F FOR SHUTDO4N
HERT@
NE&. TEMP. COEFF.
OHMS
PURCHR. MFR.
3F FOR SHUTDO4N
IN. H
2
O
FT.
Project Document No.
A.F.E. No.
Client
Project Number
Plant / Area
Equipment Service
Equipment No.
1 ACCESSOR# E"UIPMENT (CONT-D) MANUFACTURER-S DATA (CONT-D.)
2 LIGHTNING ARRESTERS BEARIN&: TYPE LUBR.
3 C.T. FOR AMMETER LUBE OIL REQUIRED: &PM = PSI&
4 DESCRIPTION TOTAL SHAFT END FLOAT
5 MAIN CONDUIT BO( SI.ED FOR: LIMIT END FLOAT TO
6 MAIN MOTOR LEADS TYPEK MOTOR ROTOR: SOLID SPLIT
INSULATED NON:INSULATED MOTOR HUB: SOLID SPLIT
! C.T.BS FOR DIFF. PROTECTION (MOUNTED BY ) FOR TE4AC $ TEI&F MOTORS:
# SUR&E CAPACITORS (MOUNTED BY ) COOLIN& 4ATER REQD. &PM
1% LI&HTNIN& ARRESTERS (MOUNTED BY ) C.4. TEMP. RISE 3F PRESS. DROP PSI
11 C.T. FOR AMMETER (MOUNTED BY ) (AIR) (&AS) REQD. CFM PRESS. MAINT.
12 SPACE FOR STRESS CONES CURVES REQD. BASED ON MTR SATURATION = RATED
13 AIR FILTERS: VOLTA&E:
14 MFR TYPE SPEED VS TORQUE (ALSO = 9 RATED VOLTA&E)
15 MANUFACTURER-S DATA SPEED VS. PO4ER FACTOR
16 MANUFACTURER SPEED VS CURRENT
1 FRAME NO. FULL LOAD RPM (IND.) %EIGHT (LBS):
1! EFFICIENCY: F.L. 324 L 122 L NET 4EI&HT SHIPPIN& 4EI&HT
1# P4R. FACTOR (IND.): F.L. 324 L 122 L ROTOR 4EI&HT MA". ERECTION 4T.
2% CURRENT (RATED VOLT.): FULL LOAD LOC?ED ROT. MA". MAINT. 4T. (IDENTIFY)
21 LOC?ED ROTOR PO4ER FACTOR DIMENSIONS (FEET ) INCHES):
22 LOC?ED ROTOR 4ITHSTAND TIME (COLD START) L 4 H
23 TORQUES (FT:LBS): FULL LOAD SHOP INSPECTION AND TESTS
24 LOC?ED ROTOR STARTIN& (SYN.) RE"UIRED %ITNESS
25 PULL:UP (IND) PULL:IN (SYN.) SHOP INSPECTION
26 BREA?DO4N (IND.) PULL:OUT (SYN.) TESTIN& IEC NEMA
2 MFR. STD. SHOP TESTS
2! OPEN CIRCUIT TIME CONSTANT (SEC.) IMMERSION TEST
2# SYMMETRICAL CONTRIBUTION TO 3% TERMINAL FAULT: SPECIAL TESTS (LIST BELO4)
3% AT 122 CYCLES AT 5 CYCLES
31
32
33 A.C. STATOR RESISTANCE OHMS = 3F
34 RATED ?VA
35 ?VA INRUSH = FULL VOLT. $ LOC?ED ROTOR (SYN.) 9
36 ?VA. = FULL VOLTA&E $ #59 SPEED 9
3 MA". LINE CURR. IN STATOR ON 1ST SLIP CYC. = PULL:OUT
3! (SYN.)
3# ACCELERATION TIME (MTR ONLY = RATED VOLT.) SEC PAINTING:
4% ACCEL.TIME (MTR $ LOAD = !59 RATED VOLT.) SEC MANUFACTURERBS STANDARD
41 OTHER:
42 ROTATION FACIN& COUPLIN& END SHIPMENT (!.4.1)
43 NO. OF STARTS PER HOUR DOMESTIC E"PORT E"PORT BO"IN& REQUIRED
44 OUTDOOR STORA&E OVER 3 MONTHS
45 FIELD DISCHAR&E RESISTOR OHMS
46 RATED E"CITATION FIELD VOLTA&E D.C. REMARKS:
4 RESISTANCE OF E"CITATION FIELD = 3F OHMS
4! E"CITATION FIELD AMPS = FULL LOAD $ RATED P.F.
4# E"CITATION FIELD AMPS: MA". MIN.
5% E"CITATION FIELD RHEOSTAT FI"ED RESBTR REQD.
51 SUPPLIED BY
MECHANICAL DATA SHEET
ROTARY COMPRESSOR
API 619 - 4TH EDITION
REACTANCES: SUB:TRANSIENT ("BB
,
)
TRANSIENT ("B
,
) SYNCHRONOUS ("
,
)
ROTOR2FIELD 4?
2
= MTR SHAFT (LB:FT
2
)
PSI&
SHOP INSPECTION AND TESTS
%ITNESS
IN H
2
O