Data Sructures and Algorithms

Data Structures and Algorithms
DSA
Annotated Reference with Examples
Granville Barne
Luca Del Tongo
Data Structures and Algorithms:

Annotated Reference with Examples
First Edition
Copyright c Granville Barnett, and Luca Del Tongo 2008.
This book is made exclusively available from DotNetSlackers

(http://dotnetslackers.com/) the place for .NET articles, and news from
some of the leading minds in the software industry.
Contents
1 Introduction
1.1 What this book is, and what it isnt . . .
1.2 Assumed knowledge . . . . . . . . . . . .
1.2.1 Big Oh notation . . . . . . . . . .
1.2.2 Imperative programming language
1.2.3 Object oriented concepts . . . . .
1.3 Pseudocode . . . . . . . . . . . . . . . . .
1.4 Tips for working through the examples . .
1.5 Book outline . . . . . . . . . . . . . . . .
1.6 Testing . . . . . . . . . . . . . . . . . . .
1.7 Where can I get the code? . . . . . . . . .
1.8 Final messages . . . . . . . . . . . . . . .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Data Structures
2 Linked Lists
2.1 Singly Linked List . . . . .
2.1.1 Insertion . . . . . . .
2.1.2 Searching . . . . . .
2.1.3 Deletion . . . . . . .
2.1.4 Traversing the list .
2.1.5 Traversing the list in
2.2 Doubly Linked List . . . . .
2.2.1 Insertion . . . . . . .
2.2.2 Deletion . . . . . . .
2.2.3 Reverse Traversal . .
2.3 Summary . . . . . . . . . .
1
1
1
1
3
4
4
6
6
7
7
7
8
.
.
.
.
.
.
.
.
.
.
.
9
9
10
10
11
12
13
13
15
15
16
17
. . . . . . . . . . . . . . .
. . . . . . . . . . . . . . .
. . . . . . . . . . . . . . .
. . . . . . . . . . . . . . .
. . . . . . . . . . . . . . .
in the binary search tree
. . . . . . . . . . . . . . .
. . . . . . . . . . . . . . .
19
20
21
22
24
24
25
26
26
. . . . . . . .
. . . . . . . .
. . . . . . . .
. . . . . . . .
. . . . . . . .
reverse order
. . . . . . . .
. . . . . . . .
. . . . . . . .
. . . . . . . .
. . . . . . . .
3 Binary Search Tree

3.1 Insertion . . . . . . . . . . . . . . . . .
3.2 Searching . . . . . . . . . . . . . . . .
3.3 Deletion . . . . . . . . . . . . . . . . .
3.4 Finding the parent of a given node . .
3.5 Attaining a reference to a node . . . .
3.6 Finding the smallest and largest values
3.7 Tree Traversals . . . . . . . . . . . . .
3.7.1 Preorder . . . . . . . . . . . . .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
3.8
3.7.2 Postorder . .
3.7.3 Inorder . . .
3.7.4 Breadth First
Summary . . . . . .
4 Heap
4.1 Insertion .
4.2 Deletion .
4.3 Searching
4.4 Traversal
4.5 Summary
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
26
29
30
31
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
32
33
37
38
41
42
5 Sets
5.1 Unordered . . . .
5.1.1 Insertion .
5.2 Ordered . . . . .
5.3 Summary . . . .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
44
46
46
47
47
6 Queues
6.1 A standard queue . .
6.2 Priority Queue . . .
6.3 Double Ended Queue
6.4 Summary . . . . . .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
48
49
49
49
53
7 AVL Tree
7.1 Tree Rotations .
7.2 Tree Rebalancing
7.3 Insertion . . . . .
7.4 Deletion . . . . .
7.5 Summary . . . .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
54
56
57
58
59
61
II
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Algorithms
8 Sorting
8.1 Bubble Sort .
8.2 Merge Sort .
8.3 Quick Sort . .
8.4 Insertion Sort
8.5 Shell Sort . .
8.6 Radix Sort .
8.7 Summary . .
62
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
63
63
63
65
67
68
68
70
9 Numeric
72
9.1 Primality Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
9.2 Base conversions . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
9.3 Attaining the greatest common denominator of two numbers . . 73
9.4 Computing the maximum value for a number of a specific base
consisting of N digits . . . . . . . . . . . . . . . . . . . . . . . . . 74
9.5 Factorial of a number . . . . . . . . . . . . . . . . . . . . . . . . 74
9.6 Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
II
10 Searching
76
10.1 Sequential Search . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
10.2 Probability Search . . . . . . . . . . . . . . . . . . . . . . . . . . 76
10.3 Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
11 Strings
11.1 Reversing the order of words in a sentence . . . . . . . . . . .
11.2 Detecting a palindrome . . . . . . . . . . . . . . . . . . . . .
11.3 Counting the number of words in a string . . . . . . . . . . .
11.4 Determining the number of repeated words within a string . .
11.5 Determining the first matching character between two strings
11.6 Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
.
.
.
.
.
.
.
.
.
.
.
.
79
79
80
81
83
84
85
A Algorithm Walkthrough
86
A.1 Iterative algorithms . . . . . . . . . . . . . . . . . . . . . . . . . 86
A.2 Recursive Algorithms . . . . . . . . . . . . . . . . . . . . . . . . . 88
A.3 Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
B Translation Walkthrough
91
B.1 Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
C Recursive Vs. Iterative Solutions
93
C.1 Activation Records . . . . . . . . . . . . . . . . . . . . . . . . . . 94
C.2 Some problems are recursive in nature . . . . . . . . . . . . . . . 95
C.3 Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
D Testing
D.1 What constitutes a unit test? .
D.2 When should I write my tests?
D.3 How seriously should I view my
D.4 The three As . . . . . . . . . .
D.5 The structuring of tests . . . .
D.6 Code Coverage . . . . . . . . .
D.7 Summary . . . . . . . . . . . .
E Symbol Definitions
. . . . . .
. . . . . .
test suite?
. . . . . .
. . . . . .
. . . . . .
. . . . . .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
97
. 97
. 98
. 99
. 99
. 99
. 100
. 100
101
III
Preface
Every book has a story as to how it came about and this one is no different,
although we would be lying if we said its development had not been somewhat
impromptu. Put simply this book is the result of a series of emails sent back
and forth between the two authors during the development of a library for
the .NET framework of the same name (with the omission of the subtitle of
course!). The conversation started off something like, Why dont we create
a more aesthetically pleasing way to present our pseudocode? After a few
weeks this new presentation style had in fact grown into pseudocode listings
with chunks of text describing how the data structure or algorithm in question
works and various other things about it. At this point we thought, What the
heck, lets make this thing into a book! And so, in the summer of 2008 we
began work on this book side by side with the actual library implementation.
When we started writing this book the only things that we were sure about
with respect to how the book should be structured were:
1. always make explanations as simple as possible while maintaining a moderately fine degree of precision to keep the more eager minded reader happy;
and
2. inject diagrams to demystify problems that are even moderatly challenging
to visualise (. . . and so we could remember how our own algorithms worked
when looking back at them!); and finally
3. present concise and self-explanatory pseudocode listings that can be ported
easily to most mainstream imperative programming languages like C++,
C#, and Java.
A key factor of this book and its associated implementations is that all
algorithms (unless otherwise stated) were designed by us, using the theory of
the algorithm in question as a guideline (for which we are eternally grateful to
their original creators). Therefore they may sometimes turn out to be worse
than the normal implementationsand sometimes not. We are two fellows
of the opinion that choice is a great thing. Read our book, read several others
on the same subject and use what you see fit from each (if anything) when
implementing your own version of the algorithms in question.
Through this book we hope that you will see the absolute necessity of understanding which data structure or algorithm to use for a certain scenario. In all
projects, especially those that are concerned with performance (here we apply
an even greater emphasis on real-time systems) the selection of the wrong data
structure or algorithm can be the cause of a great deal of performance pain.
IV
V
Therefore it is absolutely key that you think about the run time complexity and
space requirements of your selected approach. In this book we only explain the
theoretical implications to consider, but this is for a good reason: compilers are
very different in how they work. One C++ compiler may have some amazing
optimisation phases specifically targeted at recursion, another may not, for example. Of course this is just an example but you would be surprised by how
many subtle differences there are between compilers. These differences which
may make a fast algorithm slow, and vice versa. We could also factor in the
same concerns about languages that target virtual machines, leaving all the
actual various implementation issues to you given that you will know your languages compiler much better than us...well in most cases. This has resulted in
a more concise book that focuses on what we think are the key issues.
One final note: never take the words of others as gospel; verify all that can
be feasibly verified and make up your own mind.
We hope you enjoy reading this book as much as we have enjoyed writing it.
Granville Barnett
Luca Del Tongo
Acknowledgements
Writing this short book has been a fun and rewarding experience. We would
like to thank, in no particular order the following people who have helped us
during the writing of this book.
Sonu Kapoor generously hosted our book which when we released the first
draft received over thirteen thousand downloads, without his generosity this
book would not have been able to reach so many people. Jon Skeet provided us
with an alarming number of suggestions throughout for which we are eternally
grateful. Jon also edited this book as well.
We would also like to thank those who provided the odd suggestion via email
to us. All feedback was listened to and you will no doubt see some content
influenced by your suggestions.
A special thank you also goes out to those who helped publicise this book
from Microsofts Channel 9 weekly show (thanks Dan!) to the many bloggers
who helped spread the word. You gave us an audience and for that we are
extremely grateful.
Thank you to all who contributed in some way to this book. The programming community never ceases to amaze us in how willing its constituents are to
give time to projects such as this one. Thank you.
VI
About the Authors

Granville Barnett
Granville is currently a Ph.D candidate at Queensland University of Technology
(QUT) working on parallelism at the Microsoft QUT eResearch Centre1 . He also
holds a degree in Computer Science, and is a Microsoft MVP. His main interests
are in programming languages and compilers. Granville can be contacted via
one of two places: either his personal website (http://gbarnett.org) or his
blog (http://msmvps.com/blogs/gbarnett).
Luca Del Tongo

Luca is currently studying for his masters degree in Computer Science at Florence. His main interests vary from web development to research fields such as
data mining and computer vision. Luca also maintains an Italian blog which
can be found at http://blogs.ugidotnet.org/wetblog/.
1 http://www.mquter.qut.edu.au/
VII
Page intentionally left blank.
Chapter 1
Introduction
1.1
What this book is, and what it isnt
This book provides implementations of common and uncommon algorithms in

pseudocode which is language independent and provides for easy porting to most
imperative programming languages. It is not a definitive book on the theory of
data structures and algorithms.
For the most part this book presents implementations devised by the authors
themselves based on the concepts by which the respective algorithms are based
upon so it is more than possible that our implementations differ from those
considered the norm.
You should use this book alongside another on the same subject, but one
that contains formal proofs of the algorithms in question. In this book we use
the abstract big Oh notation to depict the run time complexity of algorithms
so that the book appeals to a larger audience.
1.2
Assumed knowledge
We have written this book with few assumptions of the reader, but some have
been necessary in order to keep the book as concise and approachable as possible.
We assume that the reader is familiar with the following:
1. Big Oh notation
2. An imperative programming language
3. Object oriented concepts
1.2.1
Big Oh notation
For run time complexity analysis we use big Oh notation extensively so it is vital
that you are familiar with the general concepts to determine which is the best
algorithm for you in certain scenarios. We have chosen to use big Oh notation
for a few reasons, the most important of which is that it provides an abstract
measurement by which we can judge the performance of algorithms without
using mathematical proofs.
1
CHAPTER 1. INTRODUCTION
Figure 1.1: Algorithmic run time expansion

Figure 1.1 shows some of the run times to demonstrate how important it is to
choose an efficient algorithm. For the sanity of our graph we have omitted cubic
O(n3 ), and exponential O(2n ) run times. Cubic and exponential algorithms
should only ever be used for very small problems (if ever!); avoid them if feasibly
possible.
The following list explains some of the most common big Oh notations:
O(1) constant: the operation doesnt depend on the size of its input, e.g. adding
a node to the tail of a linked list where we always maintain a pointer to
the tail node.
O(n) linear: the run time complexity is proportionate to the size of n.
O(log n) logarithmic: normally associated with algorithms that break the problem
into smaller chunks per each invocation, e.g. searching a binary search
tree.
O(n log n) just n log n: usually associated with an algorithm that breaks the problem
into smaller chunks per each invocation, and then takes the results of these
smaller chunks and stitches them back together, e.g. quick sort.
O(n2 ) quadratic: e.g. bubble sort.
O(n3 ) cubic: very rare.
O(2n ) exponential: incredibly rare.
If you encounter either of the latter two items (cubic and exponential) this is
really a signal for you to review the design of your algorithm. While prototyping algorithm designs you may just have the intention of solving the problem
irrespective of how fast it works. We would strongly advise that you always
review your algorithm design and optimise where possibleparticularly loops
and recursive callsso that you can get the most efficient run times for your
algorithms.
The biggest asset that big Oh notation gives us is that it allows us to essentially discard things like hardware. If you have two sorting algorithms, one
with a quadratic run time, and the other with a logarithmic run time then the
logarithmic algorithm will always be faster than the quadratic one when the
data set becomes suitably large. This applies even if the former is ran on a machine that is far faster than the latter. Why? Because big Oh notation isolates
a key factor in algorithm analysis: growth. An algorithm with a quadratic run
time grows faster than one with a logarithmic run time. It is generally said at
some point as n the logarithmic algorithm will become faster than the
quadratic algorithm.
Big Oh notation also acts as a communication tool. Picture the scene: you
are having a meeting with some fellow developers within your product group.
You are discussing prototype algorithms for node discovery in massive networks.
Several minutes elapse after you and two others have discussed your respective
algorithms and how they work. Does this give you a good idea of how fast each
respective algorithm is? No. The result of such a discussion will tell you more
about the high level algorithm design rather than its efficiency. Replay the scene
back in your head, but this time as well as talking about algorithm design each
respective developer states the asymptotic run time of their algorithm. Using
the latter approach you not only get a good general idea about the algorithm
design, but also key efficiency data which allows you to make better choices
when it comes to selecting an algorithm fit for purpose.
Some readers may actually work in a product group where they are given
budgets per feature. Each feature holds with it a budget that represents its uppermost time bound. If you save some time in one feature it doesnt necessarily
give you a buffer for the remaining features. Imagine you are working on an
application, and you are in the team that is developing the routines that will
essentially spin up everything that is required when the application is started.
Everything is great until your boss comes in and tells you that the start up
time should not exceed n ms. The efficiency of every algorithm that is invoked
during start up in this example is absolutely key to a successful product. Even
if you dont have these budgets you should still strive for optimal solutions.
Taking a quantitative approach for many software development properties
will make you a far superior programmer - measuring ones work is critical to
success.
1.2.2
Imperative programming language
All examples are given in a pseudo-imperative coding format and so the reader
must know the basics of some imperative mainstream programming language
to port the examples effectively, we have written this book with the following
target languages in mind:
1. C++
2. C#
3. Java
The reason that we are explicit in this requirement is simpleall our implementations are based on an imperative thinking style. If you are a functional
programmer you will need to apply various aspects from the functional paradigm
to produce efficient solutions with respect to your functional language whether
it be Haskell, F#, OCaml, etc.
Two of the languages that we have listed (C# and Java) target virtual
machines which provide various things like security sand boxing, and memory
management via garbage collection algorithms. It is trivial to port our implementations to these languages. When porting to C++ you must remember to
use pointers for certain things. For example, when we describe a linked list
node as having a reference to the next node, this description is in the context
of a managed environment. In C++ you should interpret the reference as a
pointer to the next node and so on. For programmers who have a fair amount
of experience with their respective language these subtleties will present no issue, which is why we really do emphasise that the reader must be comfortable
with at least one imperative language in order to successfully port the pseudoimplementations in this book.
It is essential that the user is familiar with primitive imperative language
constructs before reading this book otherwise you will just get lost. Some algorithms presented in this book can be confusing to follow even for experienced
programmers!
1.2.3
Object oriented concepts
For the most part this book does not use features that are specific to any one
language. In particular, we never provide data structures or algorithms that
work on generic typesthis is in order to make the samples as easy to follow
as possible. However, to appreciate the designs of our data structures you will
need to be familiar with the following object oriented (OO) concepts:
1. Inheritance
2. Encapsulation
3. Polymorphism
This is especially important if you are planning on looking at the C# target
that we have implemented (more on that in 1.7) which makes extensive use
of the OO concepts listed above. As a final note it is also desirable that the
reader is familiar with interfaces as the C# target uses interfaces throughout
the sorting algorithms.
1.3
Pseudocode
Throughout this book we use pseudocode to describe our solutions. For the
most part interpreting the pseudocode is trivial as it looks very much like a
more abstract C++, or C#, but there are a few things to point out:
1. Pre-conditions should always be enforced
2. Post-conditions represent the result of applying algorithm a to data structure d
3. The type of parameters is inferred

4. All primitive language constructs are explicitly begun and ended
If an algorithm has a return type it will often be presented in the postcondition, but where the return type is sufficiently obvious it may be omitted
for the sake of brevity.
Most algorithms in this book require parameters, and because we assign no
explicit type to those parameters the type is inferred from the contexts in which
it is used, and the operations performed upon it. Additionally, the name of
the parameter usually acts as the biggest clue to its type. For instance n is a
pseudo-name for a number and so you can assume unless otherwise stated that
n translates to an integer that has the same number of bits as a WORD on a
32 bit machine, similarly l is a pseudo-name for a list where a list is a resizeable
array (e.g. a vector).
The last major point of reference is that we always explicitly end a language
construct. For instance if we wish to close the scope of a for loop we will
explicitly state end for rather than leaving the interpretation of when scopes
are closed to the reader. While implicit scope closure works well in simple code,
in complex cases it can lead to ambiguity.
The pseudocode style that we use within this book is rather straightforward.
All algorithms start with a simple algorithm signature, e.g.
1) algorithm AlgorithmName(arg1, arg2, ..., argN )
2) ...
n) end AlgorithmName
Immediately after the algorithm signature we list any Pre or Post conditions.
1) algorithm AlgorithmName(n)
2)
Pre: n is the value to compute the factorial of
3)
n0
4)
Post: the factorial of n has been computed
5)
// ...
n) end AlgorithmName
The example above describes an algorithm by the name of AlgorithmName,
which takes a single numeric parameter n. The pre and post conditions follow
the algorithm signature; you should always enforce the pre-conditions of an
algorithm when porting them to your language of choice.
Normally what is listed as a pre-conidition is critical to the algorithms operation. This may cover things like the actual parameter not being null, or that the
collection passed in must contain at least n items. The post-condition mainly
describes the effect of the algorithms operation. An example of a post-condition
might be The list has been sorted in ascending order
Because everything we describe is language independent you will need to
make your own mind up on how to best handle pre-conditions. For example,
in the C# target we have implemented, we consider non-conformance to preconditions to be exceptional cases. We provide a message in the exception to
tell the caller why the algorithm has failed to execute normally.
1.4
Tips for working through the examples
As with most books you get out what you put in and so we recommend that in
order to get the most out of this book you work through each algorithm with a
pen and paper to track things like variable names, recursive calls etc.
The best way to work through algorithms is to set up a table, and in that
table give each variable its own column and continuously update these columns.
This will help you keep track of and visualise the mutations that are occurring
throughout the algorithm. Often while working through algorithms in such
a way you can intuitively map relationships between data structures rather
than trying to work out a few values on paper and the rest in your head. We
suggest you put everything on paper irrespective of how trivial some variables
and calculations may be so that you always have a point of reference.
When dealing with recursive algorithm traces we recommend you do the
same as the above, but also have a table that records function calls and who
they return to. This approach is a far cleaner way than drawing out an elaborate
map of function calls with arrows to one another, which gets large quickly and
simply makes things more complex to follow. Track everything in a simple and
systematic way to make your time studying the implementations far easier.
1.5
Book outline
We have split this book into two parts:

Part 1: Provides discussion and pseudo-implementations of common and uncommon data structures; and
Part 2: Provides algorithms of varying purposes from sorting to string operations.
The reader doesnt have to read the book sequentially from beginning to
end: chapters can be read independently from one another. We suggest that
in part 1 you read each chapter in its entirety, but in part 2 you can get away
with just reading the section of a chapter that describes the algorithm you are
interested in.
Each of the chapters on data structures present initially the algorithms concerned with:
1. Insertion
2. Deletion
3. Searching
The previous list represents what we believe in the vast majority of cases to
be the most important for each respective data structure.
For all readers we recommend that before looking at any algorithm you
quickly look at Appendix E which contains a table listing the various symbols
used within our algorithms and their meaning. One keyword that we would like
to point out here is yield. You can think of yield in the same light as return.
The return keyword causes the method to exit and returns control to the caller,
whereas yield returns each value to the caller. With yield control only returns
to the caller when all values to return to the caller have been exhausted.
1.6
Testing
All the data structures and algorithms have been tested using a minimised test
driven development style on paper to flesh out the pseudocode algorithm. We
then transcribe these tests into unit tests satisfying them one by one. When
all the test cases have been progressively satisfied we consider that algorithm
suitably tested.
For the most part algorithms have fairly obvious cases which need to be
satisfied. Some however have many areas which can prove to be more complex
to satisfy. With such algorithms we will point out the test cases which are tricky
and the corresponding portions of pseudocode within the algorithm that satisfy
that respective case.
As you become more familiar with the actual problem you will be able to
intuitively identify areas which may cause problems for your algorithms implementation. This in some cases will yield an overwhelming list of concerns which
will hinder your ability to design an algorithm greatly. When you are bombarded with such a vast amount of concerns look at the overall problem again
and sub-divide the problem into smaller problems. Solving the smaller problems
and then composing them is a far easier task than clouding your mind with too
many little details.
The only type of testing that we use in the implementation of all that is
provided in this book are unit tests. Because unit tests contribute such a core
piece of creating somewhat more stable software we invite the reader to view
Appendix D which describes testing in more depth.
1.7
Where can I get the code?
This book doesnt provide any code specifically aligned with it, however we do
actively maintain an open source project1 that houses a C# implementation of
all the pseudocode listed. The project is named Data Structures and Algorithms
(DSA) and can be found at http://codeplex.com/dsa.
1.8
Final messages
We have just a few final messages to the reader that we hope you digest before
you embark on reading this book:
1. Understand how the algorithm works first in an abstract sense; and
2. Always work through the algorithms on paper to understand how they
achieve their outcome
If you always follow these key points, you will get the most out of this book.
1 All readers are encouraged to provide suggestions, feature requests, and bugs so we can
further improve our implementations.
Part I
Data Structures
Chapter 2
Linked Lists
Linked lists can be thought of from a high level perspective as being a series
of nodes. Each node has at least a single pointer to the next node, and in the
last nodes case a null pointer representing that there are no more nodes in the
linked list.
In DSA our implementations of linked lists always maintain head and tail
pointers so that insertion at either the head or tail of the list is a constant
time operation. Random insertion is excluded from this and will be a linear
operation. As such, linked lists in DSA have the following characteristics:
1. Insertion is O(1)
2. Deletion is O(n)
3. Searching is O(n)
Out of the three operations the one that stands out is that of insertion. In
DSA we chose to always maintain pointers (or more aptly references) to the
node(s) at the head and tail of the linked list and so performing a traditional
insertion to either the front or back of the linked list is an O(1) operation. An
exception to this rule is performing an insertion before a node that is neither
the head nor tail in a singly linked list. When the node we are inserting before
is somewhere in the middle of the linked list (known as random insertion) the
complexity is O(n). In order to add before the designated node we need to
traverse the linked list to find that nodes current predecessor. This traversal
yields an O(n) run time.
This data structure is trivial, but linked lists have a few key points which at
times make them very attractive:
1. the list is dynamically resized, thus it incurs no copy penalty like an array
or vector would eventually incur; and
2. insertion is O(1).
2.1
Singly Linked List
Singly linked lists are one of the most primitive data structures you will find in
this book. Each node that makes up a singly linked list consists of a value, and
a reference to the next node (if any) in the list.
9
CHAPTER 2. LINKED LISTS
10
Figure 2.1: Singly linked list node
Figure 2.2: A singly linked list populated with integers
2.1.1
Insertion
In general when people talk about insertion with respect to linked lists of any
form they implicitly refer to the adding of a node to the tail of the list. When
you use an API like that of DSA and you see a general purpose method that
adds a node to the list, you can assume that you are adding the node to the tail
of the list not the head.
Adding a node to a singly linked list has only two cases:
1. head = in which case the node we are adding is now both the head and
tail of the list; or
2. we simply need to append our node onto the end of the list updating the
tail reference appropriately.
1) algorithm Add(value)
2)
Pre: value is the value to add to the list
3)
Post: value has been placed at the tail of the list
4)
n node(value)
5)
if head =
6)
head n
7)
tail n
8)
else
9)
tail.Next n
10)
tail n
11) end if
12) end Add
As an example of the previous algorithm consider adding the following sequence of integers to the list: 1, 45, 60, and 12, the resulting list is that of
Figure 2.2.
2.1.2
Searching
Searching a linked list is straightforward: we simply traverse the list checking

the value we are looking for with the value of each node in the linked list. The
algorithm listed in this section is very similar to that used for traversal in 2.1.4.
11
1) algorithm Contains(head, value)

2)
Pre: head is the head node in the list
3)
value is the value to search for
4)
Post: the item is either in the linked list, true; otherwise false
5)
n head
6)
while n = and n.Value = value
7)
n n.Next
8)
end while
9)
if n =
10)
return false
11) end if
12) return true
13) end Contains
2.1.3
Deletion
Deleting a node from a linked list is straightforward but there are a few cases
we need to account for:
1. the list is empty; or
2. the node to remove is the only node in the linked list; or
3. we are removing the head node; or
4. we are removing the tail node; or
5. the node to remove is somewhere in between the head and tail; or
6. the item to remove doesnt exist in the linked list
The algorithm whose cases we have described will remove a node from anywhere within a list irrespective of whether the node is the head etc. If you know
that items will only ever be removed from the head or tail of the list then you
can create much more concise algorithms. In the case of always removing from
the front of the linked list deletion becomes an O(1) operation.
12
1) algorithm Remove(head, value)

2)
3)
value is the value to remove from the list
4)
Post: value is removed from the list, true; otherwise false
5)
if head =
6)
// case 1
7)
return false
8)
end if
9)
n head
10) if n.Value = value
11)
if head = tail
12)
// case 2
13)
head
14)
tail
15)
else
16)
// case 3
17)
head head.Next
18)
end if
19)
return true
20) end if
21) while n.Next = and n.Next.Value = value
22)
n n.Next
23) end while
24) if n.Next =
25)
if n.Next = tail
26)
// case 4
27)
tail n
28)
end if
29)
// this is only case 5 if the conditional on line 25 was f alse
30)
n.Next n.Next.Next
31)
return true
32) end if
33) // case 6
34) return false
35) end Remove
2.1.4
Traversing the list
Traversing a singly linked list is the same as that of traversing a doubly linked
list (defined in 2.2). You start at the head of the list and continue until you
come across a node that is . The two cases are as follows:
1. node = , we have exhausted all nodes in the linked list; or
2. we must update the node reference to be node.Next.
The algorithm described is a very simple one that makes use of a simple
while loop to check the first case.
13
1) algorithm Traverse(head)
2)
3)
Post: the items in the list have been traversed
4)
n head
5)
while n = 0
6)
yield n.Value
7)
n n.Next
8)
end while
9) end Traverse
2.1.5
Traversing the list in reverse order
Traversing a singly linked list in a forward manner (i.e. left to right) is simple
as demonstrated in 2.1.4. However, what if we wanted to traverse the nodes in
the linked list in reverse order for some reason? The algorithm to perform such
a traversal is very simple, and just like demonstrated in 2.1.3 we will need to
acquire a reference to the predecessor of a node, even though the fundamental
characteristics of the nodes that make up a singly linked list make this an
expensive operation. For each node, finding its predecessor is an O(n) operation,
so over the course of traversing the whole list backwards the cost becomes O(n2 ).
Figure 2.3 depicts the following algorithm being applied to a linked list with
the integers 5, 10, 1, and 40.
1) algorithm ReverseTraversal(head, tail)
2)
Pre: head and tail belong to the same list
3)
Post: the items in the list have been traversed in reverse order
4)
if tail =
5)
curr tail
6)
while curr = head
7)
prev head
8)
while prev.Next = curr
9)
prev prev.Next
10)
end while
11)
yield curr.Value
12)
curr prev
13)
end while
14)
yield curr.Value
15) end if
16) end ReverseTraversal
This algorithm is only of real interest when we are using singly linked lists,
as you will soon see that doubly linked lists (defined in 2.2) make reverse list
traversal simple and efficient, as shown in 2.2.3.
2.2
Doubly Linked List
Doubly linked lists are very similar to singly linked lists. The only difference is
that each node has a reference to both the next and previous nodes in the list.
Figure 2.3: Reverse traveral of a singly linked list
Figure 2.4: Doubly linked list node
14
15
The following algorithms for the doubly linked list are exactly the same as
those listed previously for the singly linked list:
1. Searching (defined in 2.1.2)
2. Traversal (defined in 2.1.4)
2.2.1
Insertion
The only major difference between the algorithm in 2.1.1 is that we need to
remember to bind the previous pointer of n to the previous tail node if n was
not the first node to be inserted into the list.
2)
Pre: value is the value to add to the list
3)
Post: value has been placed at the tail of the list
4)
n node(value)
5)
if head =
6)
head n
7)
tail n
8)
else
9)
n.Previous tail
10)
tail.Next n
11)
tail n
12) end if
13) end Add
Figure 2.5 shows the doubly linked list after adding the sequence of integers
defined in 2.1.1.
Figure 2.5: Doubly linked list populated with integers
2.2.2
Deletion
As you may of guessed the cases that we use for deletion in a doubly linked
list are exactly the same as those defined in 2.1.3. Like insertion we have the
added task of binding an additional reference (P revious) to the correct value.
16
1) algorithm Remove(head, value)

2)
3)
value is the value to remove from the list
4)
Post: value is removed from the list, true; otherwise false
5)
if head =
6)
return false
7)
end if
8)
if value = head.Value
9)
if head = tail
10)
head
11)
tail
12)
else
13)
head head.Next
14)
head.Previous
15)
end if
16)
return true
17) end if
18) n head.Next
19) while n = and value = n.Value
20)
n n.Next
21) end while
22) if n = tail
23)
tail tail.Previous
24)
tail.Next
25)
return true
26) else if n =
27)
n.Previous.Next n.Next
28)
n.Next.Previous n.Previous
29)
return true
30) end if
31) return false
32) end Remove
2.2.3
Reverse Traversal
Singly linked lists have a forward only design, which is why the reverse traversal
algorithm defined in 2.1.5 required some creative invention. Doubly linked lists
make reverse traversal as simple as forward traversal (defined in 2.1.4) except
that we start at the tail node and update the pointers in the opposite direction.
Figure 2.6 shows the reverse traversal algorithm in action.
17
Figure 2.6: Doubly linked list reverse traversal

1) algorithm ReverseTraversal(tail)
2)
Pre: tail is the tail node of the list to traverse
3)
Post: the list has been traversed in reverse order
4)
n tail
5)
while n =
6)
yield n.Value
7)
n n.Previous
8)
end while
9) end ReverseTraversal
2.3
Summary
Linked lists are good to use when you have an unknown number of items to
store. Using a data structure like an array would require you to specify the size
up front; exceeding that size involves invoking a resizing algorithm which has
a linear run time. You should also use linked lists when you will only remove
nodes at either the head or tail of the list to maintain a constant run time.
This requires maintaining pointers to the nodes at the head and tail of the list
but the memory overhead will pay for itself if this is an operation you will be
performing many times.
What linked lists are not very good for is random insertion, accessing nodes
by index, and searching. At the expense of a little memory (in most cases 4
bytes would suffice), and a few more read/writes you could maintain a count
variable that tracks how many items are contained in the list so that accessing
such a primitive property is a constant operation - you just need to update
count during the insertion and deletion algorithms.
Singly linked lists should be used when you are only performing basic insertions. In general doubly linked lists are more accommodating for non-trivial
operations on a linked list.
We recommend the use of a doubly linked list when you require forwards
and backwards traversal. For the most cases this requirement is present. For
example, consider a token stream that you want to parse in a recursive descent
fashion. Sometimes you will have to backtrack in order to create the correct
parse tree. In this scenario a doubly linked list is best as its design makes
bi-directional traversal much simpler and quicker than that of a singly linked

list.
18
Chapter 3
Binary Search Tree

Binary search trees (BSTs) are very simple to understand. We start with a root
node with value x, where the left subtree of x contains nodes with values < x
and the right subtree contains nodes whose values are x. Each node follows
the same rules with respect to nodes in their left and right subtrees.
BSTs are of interest because they have operations which are favourably fast:
insertion, look up, and deletion can all be done in O(log n) time. It is important
to note that the O(log n) times for these operations can only be attained if
the BST is reasonably balanced; for a tree data structure with self balancing
properties see AVL tree defined in 7).
In the following examples you can assume, unless used as a parameter alias
that root is a reference to the root node of the tree.
!
"
!
%
'
Figure 3.1: Simple unbalanced binary search tree
19
CHAPTER 3. BINARY SEARCH TREE
3.1
20
Insertion
As mentioned previously insertion is an O(log n) operation provided that the

tree is moderately balanced.
1) algorithm Insert(value)
2)
Pre: value has passed custom type checks for type T
3)
Post: value has been placed in the correct location in the tree
4)
if root =
5)
root node(value)
6)
else
7)
InsertNode(root, value)
8)
end if
9) end Insert
1) algorithm InsertNode(current, value)
2)
Pre: current is the node to start from
3)
4)
if value < current.Value
5)
if current.Left =
6)
current.Left node(value)
7)
else
8)
InsertNode(current.Left, value)
9)
end if
10) else
11)
if current.Right =
12)
current.Right node(value)
13)
else
14)
InsertNode(current.Right, value)
15)
end if
16) end if
17) end InsertNode
The insertion algorithm is split for a good reason. The first algorithm (nonrecursive) checks a very core base case - whether or not the tree is empty. If
the tree is empty then we simply create our root node and finish. In all other
cases we invoke the recursive InsertN ode algorithm which simply guides us to
the first appropriate place in the tree to put value. Note that at each stage we
perform a binary chop: we either choose to recurse into the left subtree or the
right by comparing the new value with that of the current node. For any totally
ordered type, no value can simultaneously satisfy the conditions to place it in
both subtrees.
3.2
21
Searching
Searching a BST is even simpler than insertion. The pseudocode is self-explanatory

but we will look briefly at the premise of the algorithm nonetheless.
We have talked previously about insertion, we go either left or right with the
right subtree containing values that are x where x is the value of the node
we are inserting. When searching the rules are made a little more atomic and
at any one time we have four cases to consider:
1. the root = in which case value is not in the BST; or
2. root.Value = value in which case value is in the BST; or
3. value < root.Value, we must inspect the left subtree of root for value; or
4. value > root.Value, we must inspect the right subtree of root for value.
1) algorithm Contains(root, value)
2)
Pre: root is the root node of the tree, value is what we would like to locate
3)
Post: value is either located or not
4)
if root =
5)
return false
6)
end if
7)
if root.Value = value
8)
return true
9)
else if value < root.Value
10)
return Contains(root.Left, value)
11) else
12)
return Contains(root.Right, value)
13) end if
14) end Contains
3.3
22
Deletion
Removing a node from a BST is fairly straightforward, with four cases to consider:
1. the value to remove is a leaf node; or
2. the value to remove has a right subtree, but no left subtree; or
3. the value to remove has a left subtree, but no right subtree; or
4. the value to remove has both a left and right subtree in which case we
promote the largest value in the left subtree.
There is also an implicit fifth case whereby the node to be removed is the
only node in the tree. This case is already covered by the first, but should be
noted as a possibility nonetheless.
Of course in a BST a value may occur more than once. In such a case the
first occurrence of that value in the BST will be removed.
#4: Right subtree
23
and left subtree
#3: Left subtree

no right subtree
#2: Right subtree
14
31
no left subtree
#1: Leaf Node
Figure 3.2: binary search tree deletion cases

The Remove algorithm given below relies on two further helper algorithms
named F indP arent, and F indN ode which are described in 3.4 and 3.5 respectively.
23
1) algorithm Remove(value)
2)
Pre: value is the value of the node to remove, root is the root node of the BST
3)
Count is the number of items in the BST
3)
Post: node with value is removed if found in which case yields true, otherwise false
4)
nodeT oRemove FindNode(value)
5)
if nodeT oRemove =
6)
return false // value not in BST
7)
end if
8)
parent FindParent(value)
9)
if Count = 1
10)
root // we are removing the only node in the BST
11) else if nodeT oRemove.Left = and nodeT oRemove.Right = null
12)
// case #1
13)
if nodeT oRemove.Value < parent.Value
14)
parent.Left
15)
else
16)
parent.Right
17)
end if
18) else if nodeT oRemove.Left = and nodeT oRemove.Right =
19)
// case # 2
20)
21)
parent.Left nodeT oRemove.Right
22)
else
23)
parent.Right nodeT oRemove.Right
24)
end if
26)
// case #3
27)
28)
parent.Left nodeT oRemove.Left
29)
else
30)
parent.Right nodeT oRemove.Left
31)
end if
32) else
33)
// case #4
34)
largestV alue nodeT oRemove.Left
35)
while largestV alue.Right =
36)
// find the largest value in the left subtree of nodeT oRemove
37)
largestV alue largestV alue.Right
38)
end while
39)
// set the parents Right pointer of largestV alue to
40)
FindParent(largestV alue.Value).Right
41)
nodeT oRemove.Value largestV alue.Value
42) end if
43) Count Count 1
44) return true
45) end Remove
3.4
24
Finding the parent of a given node
The purpose of this algorithm is simple - to return a reference (or pointer) to

the parent node of the one with the given value. We have found that such an
algorithm is very useful, especially when performing extensive tree transformations.
1) algorithm FindParent(value, root)
2)
Pre: value is the value of the node we want to find the parent of
3)
root is the root node of the BST and is ! =
4)
Post: a reference to the parent node of value if found; otherwise
5)
if value = root.Value
6)
return
7)
end if
8)
if value < root.Value
9)
if root.Left =
10)
return
11)
else if root.Left.Value = value
12)
return root
13)
else
14)
return FindParent(value, root.Left)
15)
end if
16) else
17)
if root.Right =
18)
return
19)
else if root.Right.Value = value
20)
return root
21)
else
22)
return FindParent(value, root.Right)
23)
end if
24) end if
25) end FindParent
A special case in the above algorithm is when the specified value does not
exist in the BST, in which case we return . Callers to this algorithm must take
account of this possibility unless they are already certain that a node with the
specified value exists.
3.5
Attaining a reference to a node
This algorithm is very similar to 3.4, but instead of returning a reference to the
parent of the node with the specified value, it returns a reference to the node
itself. Again, is returned if the value isnt found.
25
1) algorithm FindNode(root, value)

2)
Pre: value is the value of the node we want to find the parent of
3)
root is the root node of the BST
4)
Post: a reference to the node of value if found; otherwise
5)
if root =
6)
return
7)
end if
8)
if root.Value = value
9)
return root
10) else if value < root.Value
11)
return FindNode(root.Left, value)
12) else
13)
return FindNode(root.Right, value)
14) end if
15) end FindNode
Astute readers will have noticed that the FindNode algorithm is exactly the
same as the Contains algorithm (defined in 3.2) with the modification that
we are returning a reference to a node not true or f alse. Given FindNode,
the easiest way of implementing Contains is to call FindNode and compare the
return value with .
3.6
Finding the smallest and largest values in

the binary search tree
To find the smallest value in a BST you simply traverse the nodes in the left
subtree of the BST always going left upon each encounter with a node, terminating when you find a node with no left subtree. The opposite is the case when
finding the largest value in the BST. Both algorithms are incredibly simple, and
are listed simply for completeness.
The base case in both F indM in, and F indM ax algorithms is when the Left
(F indM in), or Right (F indM ax) node references are in which case we have
reached the last node.
1) algorithm FindMin(root)
2)
Pre: root is the root node of the BST
3)
root =
4)
Post: the smallest value in the BST is located
5)
if root.Left =
6)
return root.Value
7)
end if
8)
FindMin(root.Left)
9) end FindMin
26
1) algorithm FindMax(root)
2)
3)
root =
4)
Post: the largest value in the BST is located
5)
if root.Right =
6)
return root.Value
7)
end if
8)
FindMax(root.Right)
9) end FindMax
3.7
Tree Traversals
There are various strategies which can be employed to traverse the items in a
tree; the choice of strategy depends on which node visitation order you require.
In this section we will touch on the traversals that DSA provides on all data
structures that derive from BinarySearchT ree.
3.7.1
Preorder
When using the preorder algorithm, you visit the root first, then traverse the left
subtree and finally traverse the right subtree. An example of preorder traversal
is shown in Figure 3.3.
1) algorithm Preorder(root)
2)
3)
Post: the nodes in the BST have been visited in preorder
4)
if root =
5)
yield root.Value
6)
Preorder(root.Left)
7)
Preorder(root.Right)
8)
end if
9) end Preorder
3.7.2
Postorder
This algorithm is very similar to that described in 3.7.1, however the value
of the node is yielded after traversing both subtrees. An example of postorder
traversal is shown in Figure 3.4.
1) algorithm Postorder(root)
2)
3)
Post: the nodes in the BST have been visited in postorder
4)
if root =
5)
Postorder(root.Left)
6)
Postorder(root.Right)
7)
yield root.Value
8)
end if
9) end Postorder
"
!
"
%
'
!
"
%
'
=
"
%
'
'
"
!
%
'
@
?
!
!
%
>
27
"
!
%
'
A
Figure 3.3: Preorder visit binary search tree example
B
"
!
"
%
'
!
"
%
'
=
"
%
'
'
"
!
%
'
@
?
!
!
%
>
28
"
!
%
'
A
Figure 3.4: Postorder visit binary search tree example
B
3.7.3
29
Inorder
Another variation of the algorithms defined in 3.7.1 and 3.7.2 is that of inorder
traversal where the value of the current node is yielded in between traversing
the left subtree and the right subtree. An example of inorder traversal is shown
in Figure 3.5.
!
"
!
"
%
'
!
"
%
'
=
"
%
'
'
?
!
"
!
%
"
'
@
!
%
>
!
%
'
A
B
Figure 3.5: Inorder visit binary search tree example

1) algorithm Inorder(root)
2)
3)
Post: the nodes in the BST have been visited in inorder
4)
if root =
5)
Inorder(root.Left)
6)
yield root.Value
7)
Inorder(root.Right)
8)
end if
9) end Inorder
One of the beauties of inorder traversal is that values are yielded in their
comparison order. In other words, when traversing a populated BST with the
inorder strategy, the yielded sequence would have property xi xi+1 i.
3.7.4
30
Breadth First
Traversing a tree in breadth first order yields the values of all nodes of a particular depth in the tree before any deeper ones. In other words, given a depth
d we would visit the values of all nodes at d in a left to right fashion, then we
would proceed to d + 1 and so on until we hade no more nodes to visit. An
example of breadth first traversal is shown in Figure 3.6.
Traditionally breadth first traversal is implemented using a list (vector, resizeable array, etc) to store the values of the nodes visited in breadth first order
and then a queue to store those nodes that have yet to be visited.
!
"
!
"
%
'
!
"
%
'
=
"
%
'
'
"
!
%
'
@
?
!
!
%
>
"
!
%
'
A
Figure 3.6: Breadth First visit binary search tree example
B
31
1) algorithm BreadthFirst(root)
2)
3)
Post: the nodes in the BST have been visited in breadth first order
4)
q queue
5)
while root =
6)
yield root.Value
7)
if root.Left =
8)
q.Enqueue(root.Left)
9)
end if
10)
if root.Right =
11)
q.Enqueue(root.Right)
12)
end if
13)
if !q.IsEmpty()
14)
root q.Dequeue()
15)
else
16)
root
17)
end if
18) end while
19) end BreadthFirst
3.8
Summary
A binary search tree is a good solution when you need to represent types that are
ordered according to some custom rules inherent to that type. With logarithmic
insertion, lookup, and deletion it is very effecient. Traversal remains linear, but
there are many ways in which you can visit the nodes of a tree. Trees are
recursive data structures, so typically you will find that many algorithms that
operate on a tree are recursive.
The run times presented in this chapter are based on a pretty big assumption
- that the binary search trees left and right subtrees are reasonably balanced.
We can only attain logarithmic run times for the algorithms presented earlier
when this is true. A binary search tree does not enforce such a property, and
the run times for these operations on a pathologically unbalanced tree become
linear: such a tree is effectively just a linked list. Later in 7 we will examine
an AVL tree that enforces self-balancing properties to help attain logarithmic
run times.
Chapter 4
Heap
A heap can be thought of as a simple tree data structure, however a heap usually
employs one of two strategies:
1. min heap; or
2. max heap
Each strategy determines the properties of the tree and its values. If you
were to choose the min heap strategy then each parent node would have a value
that is than its children. For example, the node at the root of the tree will
have the smallest value in the tree. The opposite is true for the max heap
strategy. In this book you should assume that a heap employs the min heap
strategy unless otherwise stated.
Unlike other tree data structures like the one defined in 3 a heap is generally
implemented as an array rather than a series of nodes which each have references to other nodes. The nodes are conceptually the same, however, having at
most two children. Figure 4.1 shows how the tree (not a heap data structure)
(12 7(3 2) 6(9 )) would be represented as an array. The array in Figure 4.1 is a
result of simply adding values in a top-to-bottom, left-to-right fashion. Figure
4.2 shows arrows to the direct left and right child of each value in the array.
This chapter is very much centred around the notion of representing a tree as
an array and because this property is key to understanding this chapter Figure
4.3 shows a step by step process to represent a tree data structure as an array.
In Figure 4.3 you can assume that the default capacity of our array is eight.
Using just an array is often not sufficient as we have to be up front about the
size of the array to use for the heap. Often the run time behaviour of a program
can be unpredictable when it comes to the size of its internal data structures,
so we need to choose a more dynamic data structure that contains the following
properties:
1. we can specify an initial size of the array for scenarios where we know the
upper storage limit required; and
2. the data structure encapsulates resizing algorithms to grow the array as
required at run time
32
CHAPTER 4. HEAP
33
Figure 4.1: Array representation of a simple tree data structure
Figure 4.2: Direct children of the nodes in an array representation of a tree data
structure
1. Vector
2. ArrayList
3. List
Figure 4.1 does not specify how we would handle adding null references to
the heap. This varies from case to case; sometimes null values are prohibited
entirely; in other cases we may treat them as being smaller than any non-null
value, or indeed greater than any non-null value. You will have to resolve this
ambiguity yourself having studied your requirements. For the sake of clarity we
will avoid the issue by prohibiting null values.
Because we are using an array we need some way to calculate the index of a
parent node, and the children of a node. The required expressions for this are
defined as follows for a node at index:
1. (index 1)/2 (parent index)
2. 2 index + 1 (left child)
3. 2 index + 2 (right child)
In Figure 4.4 a) represents the calculation of the right child of 12 (2 0 + 2);
and b) calculates the index of the parent of 3 ((3 1)/2).
4.1
Insertion
Designing an algorithm for heap insertion is simple, but we must ensure that
heap order is preserved after each insertion. Generally this is a post-insertion
operation. Inserting a value into the next free slot in an array is simple: we just
need to keep track of the next free index in the array as a counter, and increment
it after each insertion. Inserting our value into the heap is the first part of the
algorithm; the second is validating heap order. In the case of min-heap ordering
this requires us to swap the values of a parent and its child if the value of the
child is < the value of its parent. We must do this for each subtree containing
the value we just inserted.
CHAPTER 4. HEAP
Figure 4.3: Converting a tree data structure to its array counterpart
34
CHAPTER 4. HEAP
35
Figure 4.4: Calculating node properties
The run time efficiency for heap insertion is O(log n). The run time is a
by product of verifying heap order as the first part of the algorithm (the actual
insertion into the array) is O(1).
Figure 4.5 shows the steps of inserting the values 3, 9, 12, 7, and 1 into a
min-heap.
CHAPTER 4. HEAP
Figure 4.5: Inserting values into a min-heap
36
CHAPTER 4. HEAP
37
2)
Pre: value is the value to add to the heap
3)
Count is the number of items in the heap
4)
Post: the value has been added to the heap
5)
heap[Count] value
6)
Count Count +1
7)
MinHeapify()
8) end Add
1) algorithm MinHeapify()
2)
Pre: Count is the number of items in the heap
3)
heap is the array used to store the heap items
4)
Post: the heap has preserved min heap ordering
5)
i Count 1
6)
while i > 0 and heap[i] < heap[(i 1)/2]
7)
Swap(heap[i], heap[(i 1)/2]
8)
i (i 1)/2
9)
end while
10) end MinHeapify
The design of the MaxHeapify algorithm is very similar to that of the MinHeapify algorithm, the only difference is that the < operator in the second
condition of entering the while loop is changed to >.
4.2
Deletion
Just as for insertion, deleting an item involves ensuring that heap ordering is
preserved. The algorithm for deletion has three steps:
1. find the index of the value to delete
2. put the last value in the heap at the index location of the item to delete
3. verify heap ordering for each subtree which used to include the value
CHAPTER 4. HEAP
38
2)
Pre: value is the value to remove from the heap
3)
lef t, and right are updated alias for 2 index + 1, and 2 index + 2 respectively
4)
5)
6)
Post: value is located in the heap and removed, true; otherwise false
7)
// step 1
8)
index FindIndex(heap, value)
9)
if index < 0
10)
return false
11) end if
12) Count Count 1
13) // step 2
14) heap[index] heap[Count]
15) // step 3
16) while lef t < Count and heap[index] > heap[lef t] or heap[index] > heap[right]
17)
// promote smallest key from subtree
18)
if heap[lef t] < heap[right]
19)
Swap(heap, lef t, index)
20)
index lef t
21)
else
22)
Swap(heap, right, index)
23)
index right
24)
end if
25) end while
26) return true
27) end Remove
Figure 4.6 shows the Remove algorithm visually, removing 1 from a heap
containing the values 1, 3, 9, 12, and 13. In Figure 4.6 you can assume that we
have specified that the backing array of the heap should have an initial capacity
of eight.
Please note that in our deletion algorithm that we dont default the removed
value in the heap array. If you are using a heap for reference types, i.e. objects
that are allocated on a heap you will want to free that memory. This is important
in both unmanaged, and managed languages. In the latter we will want to null
that empty hole so that the garbage collector can reclaim that memory. If we
were to not null that hole then the object could still be reached and thus wont
be garbage collected.
4.3
Searching
Searching a heap is merely a matter of traversing the items in the heap array
sequentially, so this operation has a run time complexity of O(n). The search
can be thought of as one that uses a breadth first traversal as defined in 3.7.4
to visit the nodes within the heap to check for the presence of a specified item.
CHAPTER 4. HEAP
Figure 4.6: Deleting an item from a heap
39
CHAPTER 4. HEAP
40
1) algorithm Contains(value)
2)
Pre: value is the value to search the heap for
3)
4)
5)
Post: value is located in the heap, in which case true; otherwise false
6)
i0
7)
while i < Count and heap[i] = value
8)
ii+1
9)
end while
10) if i < Count
11)
return true
12) else
13)
return false
14) end if
15) end Contains
The problem with the previous algorithm is that we dont take advantage
of the properties in which all values of a heap hold, that is the property of the
heap strategy being used. For instance if we had a heap that didnt contain the
value 4 we would have to exhaust the whole backing heap array before we could
determine that it wasnt present in the heap. Factoring in what we know about
the heap we can optimise the search algorithm by including logic which makes
use of the properties presented by a certain heap strategy.
Optimising to deterministically state that a value is in the heap is not that
straightforward, however the problem is a very interesting one. As an example
consider a min-heap that doesnt contain the value 5. We can only rule that the
value is not in the heap if 5 > the parent of the current node being inspected
and < the current node being inspected nodes at the current level we are
traversing. If this is the case then 5 cannot be in the heap and so we can
provide an answer without traversing the rest of the heap. If this property is
not satisfied for any level of nodes that we are inspecting then the algorithm
will indeed fall back to inspecting all the nodes in the heap. The optimisation
that we present can be very common and so we feel that the extra logic within
the loop is justified to prevent the expensive worse case run time.
The following algorithm is specifically designed for a min-heap. To tailor the
algorithm for a max-heap the two comparison operations in the else if condition
within the inner while loop should be flipped.
CHAPTER 4. HEAP
41
1) algorithm Contains(value)
2)
Pre: value is the value to search the heap for
3)
4)
5)
Post: value is located in the heap, in which case true; otherwise false
6)
start 0
7)
nodes 1
8)
while start < Count
9)
start nodes 1
10)
end nodes + start
11)
count 0
12)
while start < Count and start < end
13)
if value = heap[start]
14)
return true
15)
else if value > Parent(heap[start]) and value < heap[start]
16)
count count + 1
17)
end if
18)
start start + 1
19)
end while
20)
if count = nodes
21)
return false
22)
end if
23)
nodes nodes 2
24) end while
25) return false
26) end Contains
The new Contains algorithm determines if the value is not in the heap by
checking whether count = nodes. In such an event where this is true then we
can confirm that nodes n at level i : value > Parent(n), value < n thus there
is no possible way that value is in the heap. As an example consider Figure 4.7.
If we are searching for the value 10 within the min-heap displayed it is obvious
that we dont need to search the whole heap to determine 9 is not present. We
can verify this after traversing the nodes in the second level of the heap as the
previous expression defined holds true.
4.4
Traversal
As mentioned in 4.3 traversal of a heap is usually done like that of any other
array data structure which our heap implementation is based upon. As a result
you traverse the array starting at the initial array index (0 in most languages)
and then visit each value within the array until you have reached the upper
bound of the heap. You will note that in the search algorithm that we use Count
as this upper bound rather than the actual physical bound of the allocated
array. Count is used to partition the conceptual heap from the actual array
implementation of the heap: we only care about the items in the heap, not the
whole arraythe latter may contain various other bits of data as a result of
heap mutation.
CHAPTER 4. HEAP
42
Figure 4.7: Determining 10 is not in the heap after inspecting the nodes of Level
2
Figure 4.8: Living and dead space in the heap backing array
If you have followed the advice we gave in the deletion algorithm then a
heap that has been mutated several times will contain some form of default
value for items no longer in the heap. Potentially you will have at most
LengthOf (heapArray) Count garbage values in the backing heap array data
structure. The garbage values of course vary from platform to platform. To
make things simple the garbage value of a reference type will be simple and 0
for a value type.
Figure 4.8 shows a heap that you can assume has been mutated many times.
For this example we can further assume that at some point the items in indexes
3 5 actually contained references to live objects of type T . In Figure 4.8
subscript is used to disambiguate separate objects of T .
From what you have read thus far you will most likely have picked up that
traversing the heap in any other order would be of little benefit. The heap
property only holds for the subtree of each node and so traversing a heap in
any other fashion requires some creative intervention. Heaps are not usually
traversed in any other way than the one prescribed previously.
4.5
Summary
Heaps are most commonly used to implement priority queues (see 6.2 for a
sample implementation) and to facilitate heap sort. As discussed in both the
insertion 4.1 and deletion 4.2 sections a heap maintains heap order according
to the selected ordering strategy. These strategies are referred to as min-heap,
CHAPTER 4. HEAP
43
and max heap. The former strategy enforces that the value of a parent node is
less than that of each of its children, the latter enforces that the value of the
parent is greater than that of each of its children.
When you come across a heap and you are not told what strategy it enforces
you should assume that it uses the min-heap strategy. If the heap can be
configured otherwise, e.g. to use max-heap then this will often require you to
state this explicitly. The heap abides progressively to a strategy during the
invocation of the insertion, and deletion algorithms. The cost of such a policy is
that upon each insertion and deletion we invoke algorithms that have logarithmic
run time complexities. While the cost of maintaining the strategy might not
seem overly expensive it does still come at a price. We will also have to factor
in the cost of dynamic array expansion at some stage. This will occur if the
number of items within the heap outgrows the space allocated in the heaps
backing array. It may be in your best interest to research a good initial starting
size for your heap array. This will assist in minimising the impact of dynamic
array resizing.
Chapter 5
Sets
A set contains a number of values, in no particular order. The values within
the set are distinct from one another.
Generally set implementations tend to check that a value is not in the set
before adding it, avoiding the issue of repeated values from ever occurring.
This section does not cover set theory in depth; rather it demonstrates briefly
the ways in which the values of sets can be defined, and common operations that
may be performed upon them.
The notation A = {4, 7, 9, 12, 0} defines a set A whose values are listed within
the curly braces.
Given the set A defined previously we can say that 4 is a member of A
denoted by 4 A, and that 99 is not a member of A denoted by 99
/ A.
Often defining a set by manually stating its members is tiresome, and more
importantly the set may contain a large number of values. A more concise way
of defining a set and its members is by providing a series of properties that the
values of the set must satisfy. For example, from the definition A = {x|x >
0, x % 2 = 0} the set A contains only positive integers that are even. x is an
alias to the current value we are inspecting and to the right hand side of | are
the properties that x must satisfy to be in the set A. In this example, x must
be > 0, and the remainder of the arithmetic expression x/2 must be 0. You will
be able to note from the previous definition of the set A that the set can contain
an infinite number of values, and that the values of the set A will be all even
integers that are a member of the natural numbers set N, where N = {1, 2, 3, ...}.
Finally in this brief introduction to sets we will cover set intersection and
union, both of which are very common operations (amongst many others) performed on sets. The union set can be defined as follows A B = {x | x
A or x B}, and intersection A B = {x | x A and x B}. Figure 5.1
demonstrates set intersection and union graphically.
Given the set definitions A = {1, 2, 3}, and B = {6, 2, 9} the union of the two
sets is A B = {1, 2, 3, 6, 9}, and the intersection of the two sets is A B = {2}.
Both set union and intersection are sometimes provided within the framework associated with mainstream languages. This is the case in .NET 3.51
where such algorithms exist as extension methods defined in the type System.Linq.Enumerable 2 , as a result DSA does not provide implementations of
1 http://www.microsoft.com/NET/
2 http://msdn.microsoft.com/en-us/library/system.linq.enumerable_members.aspx
44
CHAPTER 5. SETS
45
Figure 5.1: a) A B; b) A B
these algorithms. Most of the algorithms defined in System.Linq.Enumerable
deal mainly with sequences rather than sets exclusively.
Set union can be implemented as a simple traversal of both sets adding each
item of the two sets to a new union set.
1) algorithm Union(set1, set2)
2)
Pre: set1, and set2 =
3)
union is a set
3)
Post: A union of set1, and set2 has been created
4)
foreach item in set1
5)
union.Add(item)
6)
end foreach
7)
foreach item in set2
8)
union.Add(item)
9)
end foreach
10) return union
11) end Union
The run time of our Union algorithm is O(m + n) where m is the number
of items in the first set and n is the number of items in the second set. This
runtime applies only to sets that exhibit O(1) insertions.
Set intersection is also trivial to implement. The only major thing worth
pointing out about our algorithm is that we traverse the set containing the
fewest items. We can do this because if we have exhausted all the items in the
smaller of the two sets then there are no more items that are members of both
sets, thus we have no more items to add to the intersection set.
CHAPTER 5. SETS
46
1) algorithm Intersection(set1, set2)

2)
Pre: set1, and set2 =
3)
intersection, and smallerSet are sets
3)
Post: An intersection of set1, and set2 has been created
4)
if set1.Count < set2.Count
5)
smallerSet set1
6)
else
7)
smallerSet set2
8)
end if
9)
foreach item in smallerSet
10)
if set1.Contains(item) and set2.Contains(item)
11)
intersection.Add(item)
12)
end if
13) end foreach
14) return intersection
15) end Intersection
The run time of our Intersection algorithm is O(n) where n is the number
of items in the smaller of the two sets. Just like our Union algorithm a linear
runtime can only be attained when operating on a set with O(1) insertion.
5.1
Unordered
Sets in the general sense do not enforce the explicit ordering of their members. For example the members of B = {6, 2, 9} conform to no ordering scheme
because it is not required.
Most libraries provide implementations of unordered sets and so DSA does
not; we simply mention it here to disambiguate between an unordered set and
ordered set.
We will only look at insertion for an unordered set and cover briefly why a
hash table is an efficient data structure to use for its implementation.
5.1.1
Insertion
An unordered set can be efficiently implemented using a hash table as its backing
data structure. As mentioned previously we only add an item to a set if that
item is not already in the set, so the backing data structure we use must have
a quick look up and insertion run time complexity.
A hash map generally provides the following:
1. O(1) for insertion
2. approaching O(1) for look up
The above depends on how good the hashing algorithm of the hash table
is, but most hash tables employ incredibly efficient general purpose hashing
algorithms and so the run time complexities for the hash table in your library
of choice should be very similar in terms of efficiency.
CHAPTER 5. SETS
5.2
47
Ordered
An ordered set is similar to an unordered set in the sense that its members are
distinct, but an ordered set enforces some predefined comparison on each of its
members to produce a set whose members are ordered appropriately.
In DSA 0.5 and earlier we used a binary search tree (defined in 3) as the
internal backing data structure for our ordered set. From versions 0.6 onwards
we replaced the binary search tree with an AVL tree primarily because AVL is
balanced.
The ordered set has its order realised by performing an inorder traversal
upon its backing tree data structure which yields the correct ordered sequence
of set members.
Because an ordered set in DSA is simply a wrapper for an AVL tree that
additionally ensures that the tree contains unique items you should read 7 to
learn more about the run time complexities associated with its operations.
5.3
Summary
Sets provide a way of having a collection of unique objects, either ordered or

unordered.
When implementing a set (either ordered or unordered) it is key to select
the correct backing data structure. As we discussed in 5.1.1 because we check
first if the item is already contained within the set before adding it we need
this check to be as quick as possible. For unordered sets we can rely on the use
of a hash table and use the key of an item to determine whether or not it is
already contained within the set. Using a hash table this check results in a near
constant run time complexity. Ordered sets cost a little more for this check,
however the logarithmic growth that we incur by using a binary search tree as
its backing data structure is acceptable.
Another key property of sets implemented using the approach we describe is
that both have favourably fast look-up times. Just like the check before insertion, for a hash table this run time complexity should be near constant. Ordered
sets as described in 3 perform a binary chop at each stage when searching for
the existence of an item yielding a logarithmic run time.
We can use sets to facilitate many algorithms that would otherwise be a little
less clear in their implementation. For example in 11.4 we use an unordered
set to assist in the construction of an algorithm that determines the number of
repeated words within a string.
Chapter 6
Queues
Queues are an essential data structure that are found in vast amounts of software from user mode to kernel mode applications that are core to the system.
Fundamentally they honour a first in first out (FIFO) strategy, that is the item
first put into the queue will be the first served, the second item added to the
queue will be the second to be served and so on.
A traditional queue only allows you to access the item at the front of the
queue; when you add an item to the queue that item is placed at the back of
the queue.
Historically queues always have the following three core methods:
Enqueue: places an item at the back of the queue;
Dequeue: retrieves the item at the front of the queue, and removes it from the
queue;
Peek: 1 retrieves the item at the front of the queue without removing it from
the queue
As an example to demonstrate the behaviour of a queue we will walk through
a scenario whereby we invoke each of the previously mentioned methods observing the mutations upon the queue data structure. The following list describes
the operations performed upon the queue in Figure 6.1:
1. Enqueue(10)
2. Enqueue(12)
3. Enqueue(9)
4. Enqueue(8)
5. Enqueue(3)
6. Dequeue()
7. Peek()
1 This
operation is sometimes referred to as Front
48
CHAPTER 6. QUEUES
49
8. Enqueue(33)
9. Peek()
10. Dequeue()
6.1
A standard queue
A queue is implicitly like that described prior to this section. In DSA we dont
provide a standard queue because queues are so popular and such a core data
structure that you will find pretty much every mainstream library provides a
queue data structure that you can use with your language of choice. In this
section we will discuss how you can, if required, implement an efficient queue
data structure.
The main property of a queue is that we have access to the item at the
front of the queue. The queue data structure can be efficiently implemented
using a singly linked list (defined in 2.1). A singly linked list provides O(1)
insertion and deletion run time complexities. The reason we have an O(1) run
time complexity for deletion is because we only ever remove items from the front
of queues (with the Dequeue operation). Since we always have a pointer to the
item at the head of a singly linked list, removal is simply a case of returning
the value of the old head node, and then modifying the head pointer to be the
next node of the old head node. The run time complexity for searching a queue
remains the same as that of a singly linked list: O(n).
6.2
Priority Queue
Unlike a standard queue where items are ordered in terms of who arrived first,
a priority queue determines the order of its items by using a form of custom
comparer to see which item has the highest priority. Other than the items in a
priority queue being ordered by priority it remains the same as a normal queue:
you can only access the item at the front of the queue.
A sensible implementation of a priority queue is to use a heap data structure
(defined in 4). Using a heap we can look at the first item in the queue by simply
returning the item at index 0 within the heap array. A heap provides us with the
ability to construct a priority queue where the items with the highest priority
are either those with the smallest value, or those with the largest.
6.3
Double Ended Queue
Unlike the queues we have talked about previously in this chapter a double
ended queue allows you to access the items at both the front, and back of the
queue. A double ended queue is commonly known as a deque which is the name
we will here on in refer to it as.
A deque applies no prioritization strategy to its items like a priority queue
does, items are added in order to either the front of back of the deque. The
former properties of the deque are denoted by the programmer utilising the data
structures exposed interface.
CHAPTER 6. QUEUES
Figure 6.1: Queue mutations
50
CHAPTER 6. QUEUES
51
Deques provide front and back specific versions of common queue operations,
e.g. you may want to enqueue an item to the front of the queue rather than
the back in which case you would use a method with a name along the lines
of EnqueueFront. The following list identifies operations that are commonly
supported by deques:
EnqueueFront
EnqueueBack
DequeueFront
DequeueBack
PeekFront
PeekBack
Figure 6.2 shows a deque after the invocation of the following methods (inorder):
1. EnqueueBack(12)
2. EnqueueFront(1)
3. EnqueueBack(23)
4. EnqueueFront(908)
5. DequeueFront()
6. DequeueBack()
The operations have a one-to-one translation in terms of behaviour with
those of a normal queue, or priority queue. In some cases the set of algorithms
that add an item to the back of the deque may be named as they are with
normal queues, e.g. EnqueueBack may simply be called Enqueue an so on. Some
frameworks also specify explicit behaviours that data structures must adhere to.
This is certainly the case in .NET where most collections implement an interface
which requires the data structure to expose a standard Add method. In such
a scenario you can safely assume that the Add method will simply enqueue an
item to the back of the deque.
With respect to algorithmic run time complexities a deque is the same as
a normal queue. That is enqueueing an item to the back of a the queue is
O(1), additionally enqueuing an item to the front of the queue is also an O(1)
operation.
A deque is a wrapper data structure that uses either an array, or a doubly
linked list. Using an array as the backing data structure would require the programmer to be explicit about the size of the array up front, this would provide
an obvious advantage if the programmer could deterministically state the maximum number of items the deque would contain at any one time. Unfortunately
in most cases this doesnt hold, as a result the backing array will inherently
incur the expense of invoking a resizing algorithm which would most likely be
an O(n) operation. Such an approach would also leave the library developer
CHAPTER 6. QUEUES
Figure 6.2: Deque data structure after several mutations
52
CHAPTER 6. QUEUES
53
to look at array minimization techniques as well, it could be that after several

invocations of the resizing algorithm and various mutations on the deque later
that we have an array taking up a considerable amount of memory yet we are
only using a few small percentage of that memory. An algorithm described
would also be O(n) yet its invocation would be harder to gauge strategically.
To bypass all the aforementioned issues a deque typically uses a doubly
linked list as its baking data structure. While a node that has two pointers
consumes more memory than its array item counterpart it makes redundant the
need for expensive resizing algorithms as the data structure increases in size
dynamically. With a language that targets a garbage collected virtual machine
memory reclamation is an opaque process as the nodes that are no longer referenced become unreachable and are thus marked for collection upon the next
invocation of the garbage collection algorithm. With C++ or any other language that uses explicit memory allocation and deallocation it will be up to the
programmer to decide when the memory that stores the object can be freed.
6.4
Summary
With normal queues we have seen that those who arrive first are dealt with first;
that is they are dealt with in a first-in-first-out (FIFO) order. Queues can be
ever so useful; for example the Windows CPU scheduler uses a different queue
for each priority of process to determine which should be the next process to
utilise the CPU for a specified time quantum. Normal queues have constant
insertion and deletion run times. Searching a queue is fairly unusualtypically
you are only interested in the item at the front of the queue. Despite that,
searching is usually exposed on queues and typically the run time is linear.
In this chapter we have also seen priority queues where those at the front
of the queue have the highest priority and those near the back have the lowest.
One implementation of a priority queue is to use a heap data structure as its
backing store, so the run times for insertion, deletion, and searching are the
same as those for a heap (defined in 4).
Queues are a very natural data structure, and while they are fairly primitive
they can make many problems a lot simpler. For example the breadth first
search defined in 3.7.4 makes extensive use of queues.
Chapter 7
AVL Tree
In the early 60s G.M. Adelson-Velsky and E.M. Landis invented the first selfbalancing binary search tree data structure, calling it AVL Tree.
An AVL tree is a binary search tree (BST, defined in 3) with a self-balancing
condition stating that the difference between the height of the left and right
subtrees cannot be no more than one, see Figure 7.1. This condition, restored
after each tree modification, forces the general shape of an AVL tree. Before
continuing, let us focus on why balance is so important. Consider a binary
search tree obtained by starting with an empty tree and inserting some values
in the following order 1,2,3,4,5.
The BST in Figure 7.2 represents the worst case scenario in which the running time of all common operations such as search, insertion and deletion are
O(n). By applying a balance condition we ensure that the worst case running
time of each common operation is O(log n). The height of an AVL tree with n
nodes is O(log n) regardless of the order in which values are inserted.
The AVL balance condition, known also as the node balance factor represents
an additional piece of information stored for each node. This is combined with
a technique that efficiently restores the balance condition for the tree. In an
AVL tree the inventors make use of a well-known technique called tree rotation.
h+1
Figure 7.1: The left and right subtrees of an AVL tree differ in height by at
most 1
54
CHAPTER 7. AVL TREE
55
"
Figure 7.2: Unbalanced binary search tree
a)
b)
Figure 7.3: Avl trees, insertion order: -a)1,2,3,4,5 -b)1,5,4,3,2
CHAPTER 7. AVL TREE
7.1
56
Tree Rotations
A tree rotation is a constant time operation on a binary search tree that changes
the shape of a tree while preserving standard BST properties. There are left and
right rotations both of them decrease the height of a BST by moving smaller
subtrees down and larger subtrees up.
14
24
Right Rotation
14
Left Rotation
2
11
Figure 7.4: Tree left and right rotations
11
24
CHAPTER 7. AVL TREE
57
1) algorithm LeftRotation(node)
2)
Pre: node.Right ! =
3)
Post: node.Right is the new root of the subtree,
4)
node has become node.Rights left child and,
5)
BST properties are preserved
6)
RightN ode node.Right
7)
node.Right RightN ode.Left
8)
RightN ode.Left node
9) end LeftRotation
1) algorithm RightRotation(node)
2)
Pre: node.Left ! =
3)
Post: node.Left is the new root of the subtree,
4)
node has become node.Lefts right child and,
5)
BST properties are preserved
6)
Lef tN ode node.Left
7)
node.Left Lef tN ode.Right
8)
Lef tN ode.Right node
9) end RightRotation
The right and left rotation algorithms are symmetric. Only pointers are
changed by a rotation resulting in an O(1) runtime complexity; the other fields
present in the nodes are not changed.
7.2
Tree Rebalancing
The algorithm that we present in this section verifies that the left and right
subtrees differ at most in height by 1. If this property is not present then we
perform the correct rotation.
Notice that we use two new algorithms that represent double rotations.
These algorithms are named LeftAndRightRotation, and RightAndLeftRotation.
The algorithms are self documenting in their names, e.g. LeftAndRightRotation
first performs a left rotation and then subsequently a right rotation.
CHAPTER 7. AVL TREE
58
1) algorithm CheckBalance(current)
2)
Pre: current is the node to start from balancing
3)
Post: current height has been updated while tree balance is if needed
4)
restored through rotations
5)
if current.Left = and current.Right =
6)
current.Height = -1;
7)
else
8)
current.Height = Max(Height(current.Left),Height(current.Right)) + 1
9)
end if
10) if Height(current.Left) - Height(current.Right) > 1
11)
if Height(current.Left.Left) - Height(current.Left.Right) > 0
12)
RightRotation(current)
13)
else
14)
LeftAndRightRotation(current)
15)
end if
16) else if Height(current.Left) - Height(current.Right) < 1
17)
if Height(current.Right.Left) - Height(current.Right.Right) < 0
18)
LeftRotation(current)
19)
else
20)
RightAndLeftRotation(current)
21)
end if
22) end if
23) end CheckBalance
7.3
Insertion
AVL insertion operates first by inserting the given value the same way as BST
insertion and then by applying rebalancing techniques if necessary. The latter
is only performed if the AVL property no longer holds, that is the left and right
subtrees height differ by more than 1. Each time we insert a node into an AVL
tree:
1. We go down the tree to find the correct point at which to insert the node,
in the same manner as for BST insertion; then
2. we travel up the tree from the inserted node and check that the node
balancing property has not been violated; if the property hasnt been
violated then we need not rebalance the tree, the opposite is true if the
balancing property has been violated.
CHAPTER 7. AVL TREE
59
1) algorithm Insert(value)
2)
Pre: value has passed custom type checks for type T
3)
4)
if root =
5)
root node(value)
6)
else
7)
InsertNode(root, value)
8)
end if
9) end Insert
1) algorithm InsertNode(current, value)
2)
Pre: current is the node to start from
3)
Post: value has been placed in the correct location in the tree while
4)
preserving tree balance
5)
if value < current.Value
6)
if current.Left =
7)
current.Left node(value)
8)
else
9)
InsertNode(current.Left, value)
10)
end if
11) else
12)
if current.Right =
13)
current.Right node(value)
14)
else
15)
InsertNode(current.Right, value)
16)
end if
17) end if
18) CheckBalance(current)
19) end InsertNode
7.4
Deletion
Our balancing algorithm is like the one presented for our BST (defined in 3.3).
The major difference is that we have to ensure that the tree still adheres to the
AVL balance property after the removal of the node. If the tree doesnt need
to be rebalanced and the value we are removing is contained within the tree
then no further step are required. However, when the value is in the tree and
its removal upsets the AVL balance property then we must perform the correct
rotation(s).
CHAPTER 7. AVL TREE
60
2)
Pre: value is the value of the node to remove, root is the root node
3)
of the Avl
4)
Post: node with value is removed and tree rebalanced if found in which
5)
case yields true, otherwise false
6)
nodeT oRemove root
7)
parent
8)
Stackpath root
9)
while nodeT oRemove = and nodeT oRemove.V alue = V alue
10)
parent = nodeT oRemove
11)
if value < nodeT oRemove.Value
12)
nodeT oRemove nodeToRemove.Left
13)
else
14)
nodeT oRemove nodeToRemove.Right
15)
end if
16) path.Push(nodeToRemove)
17) end while
18) if nodeT oRemove =
19)
return false // value not in Avl
20) end if
21) parent FindParent(value)
22) if count = 1 // count keeps track of the # of nodes in the Avl
23)
root // we are removing the only node in the Avl
24) else if nodeT oRemove.Left = and nodeT oRemove.Right = null
25)
// case #1
26)
27)
parent.Left
28)
else
29)
parent.Right
30)
end if
32)
// case # 2
33)
34)
parent.Left nodeT oRemove.Right
35)
else
36)
parent.Right nodeT oRemove.Right
37)
end if
39)
// case #3
40)
41)
parent.Left nodeT oRemove.Left
42)
else
43)
parent.Right nodeT oRemove.Left
44)
end if
45) else
46)
// case #4
47)
largestV alue nodeT oRemove.Left
48)
while largestV alue.Right =
49)
// find the largest value in the left subtree of nodeT oRemove
50)
largestV alue largestV alue.Right
CHAPTER 7. AVL TREE
61
51)
end while
52)
// set the parents Right pointer of largestV alue to
53)
FindParent(largestV alue.Value).Right
54)
nodeT oRemove.Value largestV alue.Value
55) end if
56) while path.Count > 0
57)
CheckBalance(path.Pop()) // we trackback to the root node check balance
58) end while
59) count count 1
60) return true
61) end Remove
7.5
Summary
The AVL tree is a sophisticated self balancing tree. It can be thought of as

the smarter, younger brother of the binary search tree. Unlike its older brother
the AVL tree avoids worst case linear complexity runtimes for its operations.
The AVL tree guarantees via the enforcement of balancing algorithms that the
left and right subtrees differ in height by at most 1 which yields at most a
logarithmic runtime complexity.
Part II
Algorithms
62
Chapter 8
Sorting
All the sorting algorithms in this chapter use data structures of a specific type
to demonstrate sorting, e.g. a 32 bit integer is often used as its associated
operations (e.g. <, >, etc) are clear in their behaviour.
The algorithms discussed can easily be translated into generic sorting algorithms within your respective language of choice.
8.1
Bubble Sort
One of the most simple forms of sorting is that of comparing each item with
every other item in some list, however as the description may imply this form
of sorting is not particularly effecient O(n2 ). In its most simple form bubble
sort can be implemented as two loops.
1) algorithm BubbleSort(list)
2)
Pre: list =
3)
Post: list has been sorted into values of ascending order
4)
for i 0 to list.Count 1
5)
for j 0 to list.Count 1
6)
if list[i] < list[j]
7)
Swap(list[i], list[j])
8)
end if
9)
end for
10) end for
11) return list
12) end BubbleSort
8.2
Merge Sort
Merge sort is an algorithm that has a fairly efficient space time complexity O(n log n) and is fairly trivial to implement. The algorithm is based on splitting
a list, into two similar sized lists (lef t, and right) and sorting each list and then
merging the sorted lists back together.
Note: the function MergeOrdered simply takes two ordered lists and makes
them one.
63
CHAPTER 8. SORTING
#"
"
%# %"
"
%"
#" %#
"
"
%# %"
"

"

64
"
#" %" %#

"
"
#" %" %#
"
#" %" %#
"
#"
"
%" %#
"
%"
#" %#
"
"
#" %" %#
"
#" %" %#
"
"
#"
"
%"
%# #"
"
%"
#" %#
"
%" #" %#
"
"
#" %" %#
"
"
"
"
Figure 8.1: Bubble Sort Iterations

1) algorithm Mergesort(list)
2)
Pre: list =
3)
4)
if list.Count = 1 // already sorted
5)
return list
6)
end if
7)
m list.Count / 2
8)
lef t list(m)
9)
right list(list.Count m)
10) for i 0 to lef t.Count1
11)
lef t[i] list[i]
12) end for
13) for i 0 to right.Count1
14)
right[i] list[i]
15) end for
16) lef t Mergesort(lef t)
17) right Mergesort(right)
18) return MergeOrdered(lef t, right)
19) end Mergesort
"
#" %" %#

"
"
CHAPTER 8. SORTING
65
4
4
75
75
75
54
75
74
74
74
75
2
54
74
54
74
54
54
54
5
4
Divide
Impera (Merge)
Figure 8.2: Merge Sort Divide et Impera Approach
8.3
Quick Sort
Quick sort is one of the most popular sorting algorithms based on divide et
impera strategy, resulting in an O(n log n) complexity. The algorithm starts by
picking an item, called pivot, and moving all smaller items before it, while all
greater elements after it. This is the main quick sort operation, called partition,
recursively repeated on lesser and greater sub lists until their size is one or zero
- in which case the list is implicitly sorted.
Choosing an appropriate pivot, as for example the median element is fundamental for avoiding the drastically reduced performance of O(n2 ).
CHAPTER 8. SORTING
66
75 74
75 74
54 74
4
2
Pivot
Pivot
54
Pivot
54
Pivot
75
74 Pivot
54 75
54 74 75
Pivot
74 Pivot
75
74 Pivot
75
Pivot
54 74 75
Figure 8.3: Quick Sort Example (pivot median strategy)

1) algorithm QuickSort(list)
2)
Pre: list =
3)
4)
if list.Count = 1 // already sorted
5)
return list
6)
end if
7)
pivot MedianValue(list)
8)
for i 0 to list.Count1
9)
if list[i] = pivot
10)
equal.Insert(list[i])
11)
end if
12)
if list[i] < pivot
13)
less.Insert(list[i])
14)
end if
15)
if list[i] > pivot
16)
greater.Insert(list[i])
17)
end if
18) end for
19) return Concatenate(QuickSort(less), equal, QuickSort(greater))
20) end Quicksort
CHAPTER 8. SORTING
8.4
67
Insertion Sort
Insertion sort is a somewhat interesting algorithm with an expensive runtime of

O(n2 ). It can be best thought of as a sorting scheme similar to that of sorting
a hand of playing cards, i.e. you take one card and then look at the rest with
the intent of building up an ordered set of cards in your hand.
"
"
%#
%# %"
#"
"
%"
%# %"
#"
"
%# %"
#"
#"
"
%" %#
#"
"
%" %# #"
"
Figure 8.4: Insertion Sort Iterations

1) algorithm Insertionsort(list)
2)
Pre: list =
3)
4)
unsorted 1
5)
while unsorted < list.Count
6)
hold list[unsorted]
7)
i unsorted 1
8)
while i 0 and hold < list[i]
9)
list[i + 1] list[i]
10)
ii1
11)
end while
12)
list[i + 1] hold
13)
unsorted unsorted + 1
14) end while
15) return list
16) end Insertionsort
#" %" %#
CHAPTER 8. SORTING
8.5
68
Shell Sort
Put simply shell sort can be thought of as a more efficient variation of insertion
sort as described in 8.4, it achieves this mainly by comparing items of varying
distances apart resulting in a run time complexity of O(n log 2 n).
Shell sort is fairly straight forward but may seem somewhat confusing at
first as it differs from other sorting algorithms in the way it selects items to
compare. Figure 8.5 shows shell sort being ran on an array of integers, the red
coloured square is the current value we are holding.
1) algorithm ShellSort(list)
2)
Pre: list =
3)
4)
increment list.Count / 2
5)
while increment = 0
6)
current increment
7)
while current < list.Count
8)
hold list[current]
9)
i current increment
10)
while i 0 and hold < list[i]
11)
list[i + increment] list[i]
12)
i = increment
13)
end while
14)
list[i + increment] hold
15)
current current + 1
16)
end while
17)
increment / = 2
18) end while
19) return list
20) end ShellSort
8.6
Radix Sort
Unlike the sorting algorithms described previously radix sort uses buckets to
sort items, each bucket holds items with a particular property called a key.
Normally a bucket is a queue, each time radix sort is performed these buckets
are emptied starting the smallest key bucket to the largest. When looking at
items within a list to sort we do so by isolating a specific key, e.g. in the example
we are about to show we have a maximum of three keys for all items, that is
the highest key we need to look at is hundreds. Because we are dealing with, in
this example base 10 numbers we have at any one point 10 possible key values
0..9 each of which has their own bucket. Before we show you this first simple
version of radix sort let us clarify what we mean by isolating keys. Given the
number 102 if we look at the first key, the ones then we can see we have two of
them, progressing to the next key - tens we can see that the number has zero
of them, finally we can see that the number has a single hundred. The number
used as an example has in total three keys:
CHAPTER 8. SORTING
69
Figure 8.5: Shell sort
CHAPTER 8. SORTING
70
1. Ones
2. Tens
3. Hundreds
For further clarification what if we wanted to determine how many thousands
the number 102 has? Clearly there are none, but often looking at a number as
final like we often do it is not so obvious so when asked the question how many
thousands does 102 have you should simply pad the number with a zero in that
location, e.g. 0102 here it is more obvious that the key value at the thousands
location is zero.
The last thing to identify before we actually show you a simple implementation of radix sort that works on only positive integers, and requires you to
specify the maximum key size in the list is that we need a way to isolate a
specific key at any one time. The solution is actually very simple, but its not
often you want to isolate a key in a number so we will spell it out clearly
here. A key can be accessed from any integer with the following expression:
key (number / keyT oAccess) % 10. As a simple example lets say that we
want to access the tens key of the number 1290, the tens column is key 10 and
so after substitution yields key (1290 / 10) % 10 = 9. The next key to
look at for a number can be attained by multiplying the last key by ten working
left to right in a sequential manner. The value of key is used in the following
algorithm to work out the index of an array of queues to enqueue the item into.
1) algorithm Radix(list, maxKeySize)
2)
Pre: list =
3)
maxKeySize 0 and represents the largest key size in the list
4)
Post: list has been sorted
5)
queues Queue[10]
6)
indexOf Key 1
7)
fori 0 to maxKeySize 1
8)
foreach item in list
9)
queues[GetQueueIndex(item, indexOf Key)].Enqueue(item)
10)
end foreach
11)
list CollapseQueues(queues)
12)
ClearQueues(queues)
13)
indexOf Key indexOf Key 10
14) end for
15) return list
16) end Radix
Figure 8.6 shows the members of queues from the algorithm described above
operating on the list whose members are 90, 12, 8, 791, 123, and 61, the key we
are interested in for each number is highlighted. Omitted queues in Figure 8.6
mean that they contain no items.
8.7
Summary
Throughout this chapter we have seen many different algorithms for sorting
lists, some are very efficient (e.g. quick sort defined in 8.3), some are not (e.g.
CHAPTER 8. SORTING
71
Figure 8.6: Radix sort base 10 algorithm

bubble sort defined in 8.1).
Selecting the correct sorting algorithm is usually denoted purely by efficiency,
e.g. you would always choose merge sort over shell sort and so on. There are
also other factors to look at though and these are based on the actual implementation. Some algorithms are very nicely expressed in a recursive fashion,
however these algorithms ought to be pretty efficient, e.g. implementing a linear,
quadratic, or slower algorithm using recursion would be a very bad idea.
If you want to learn more about why you should be very, very careful when
implementing recursive algorithms see Appendix C.
Chapter 9
Numeric
Unless stated otherwise the alias n denotes a standard 32 bit integer.
9.1
Primality Test
A simple algorithm that determines whether or not a given integer is a prime

number, e.g. 2, 5, 7, and 13 are all prime numbers, however 6 is not as it can
be the result of the product of two numbers that are <
6.
In an attempt to slow down the inner loop the n is used as the upper
bound.
1) algorithm IsPrime(n)
2)
Post: n is determined to be a prime or not
3)
for i 2 to n do
4)
for j 1 to sqrt(n) do
5)
if i j = n
6)
return false
7)
end if
8)
end for
9)
end for
10) end IsPrime
9.2
Base conversions
DSA contains a number of algorithms that convert a base 10 number to its

equivalent binary, octal or hexadecimal form. For example 7810 has a binary
representation of 10011102 .
Table 9.1 shows the algorithm trace when the number to convert to binary
is 74210 .
72
CHAPTER 9. NUMERIC
73
1) algorithm ToBinary(n)
2)
Pre: n 0
3)
Post: n has been converted into its base 2 representation
4)
while n > 0
5)
list.Add(n % 2)
6)
n n/2
7)
end while
8)
return Reverse(list)
9) end ToBinary
n
742
371
185
92
46
23
11
5
2
1
list
{0}
{ 0, 1 }
{ 0, 1, 1 }
{ 0, 1, 1, 0 }
{ 0, 1, 1, 0, 1 }
{ 0, 1, 1, 0, 1, 1 }
{ 0, 1, 1, 0, 1, 1, 1 }
{ 0, 1, 1, 0, 1, 1, 1, 1 }
{ 0, 1, 1, 0, 1, 1, 1, 1, 0 }
{ 0, 1, 1, 0, 1, 1, 1, 1, 0, 1 }
Table 9.1: Algorithm trace of ToBinary
9.3
Attaining the greatest common denominator of two numbers
A fairly routine problem in mathematics is that of finding the greatest common

denominator of two integers, what we are essentially after is the greatest number
which is a multiple of both, e.g. the greatest common denominator of 9, and
15 is 3. One of the most elegant solutions to this problem is based on Euclids
algorithm that has a run time complexity of O(n2 ).
1) algorithm GreatestCommonDenominator(m, n)
2)
Pre: m and n are integers
3)
Post: the greatest common denominator of the two integers is calculated
4)
if n = 0
5)
return m
6)
end if
7)
return GreatestCommonDenominator(n, m % n)
8) end GreatestCommonDenominator
CHAPTER 9. NUMERIC
9.4
74
Computing the maximum value for a number of a specific base consisting of N digits
This algorithm computes the maximum value of a number for a given number
of digits, e.g. using the base 10 system the maximum number we can have
made up of 4 digits is the number 999910 . Similarly the maximum number that
consists of 4 digits for a base 2 number is 11112 which is 1510 .
The expression by which we can compute this maximum value for N digits
is: B N 1. In the previous expression B is the number base, and N is the
number of digits. As an example if we wanted to determine the maximum value
for a hexadecimal number (base 16) consisting of 6 digits the expression would
be as follows: 166 1. The maximum value of the previous example would be
represented as F F F F F F16 which yields 1677721510 .
In the following algorithm numberBase should be considered restricted to
the values of 2, 8, 9, and 16. For this reason in our actual implementation
numberBase has an enumeration type. The Base enumeration type is defined
as:
Base = {Binary 2, Octal 8, Decimal 10, Hexadecimal 16}
The reason we provide the definition of Base is to give you an idea how this
algorithm can be modelled in a more readable manner rather than using various
checks to determine the correct base to use. For our implementation we cast the
value of numberBase to an integer, as such we extract the value associated with
the relevant option in the Base enumeration. As an example if we were to cast
the option Octal to an integer we would get the value 8. In the algorithm listed
below the cast is implicit so we just use the actual argument numberBase.
1) algorithm MaxValue(numberBase, n)
2)
Pre: numberBase is the number system to use, n is the number of digits
3)
Post: the maximum value for numberBase consisting of n digits is computed
4)
return Power(numberBase, n) 1
5) end MaxValue
9.5
Factorial of a number
Attaining the factorial of a number is a primitive mathematical operation. Many

implementations of the factorial algorithm are recursive as the problem is recursive in nature, however here we present an iterative solution. The iterative
solution is presented because it too is trivial to implement and doesnt suffer
from the use of recursion (for more on recursion see C).
The factorial of 0 and 1 is 0. The aforementioned acts as a base case that we
will build upon. The factorial of 2 is 2 the factorial of 1, similarly the factorial
of 3 is 3 the factorial of 2 and so on. We can indicate that we are after the
factorial of a number using the form N ! where N is the number we wish to
attain the factorial of. Our algorithm doesnt use such notation but it is handy
to know.
CHAPTER 9. NUMERIC
75
1) algorithm Factorial(n)
2)
Pre: n 0, n is the number to compute the factorial of
3)
Post: the factorial of n is computed
4)
if n < 2
5)
return 1
6)
end if
7)
f actorial 1
8)
for i 2 to n
9)
f actorial f actorial i
10) end for
11) return f actorial
12) end Factorial
9.6
Summary
In this chapter we have presented several numeric algorithms, most of which

are simply here because they were fun to design. Perhaps the message that
the reader should gain from this chapter is that algorithms can be applied to
several domains to make work in that respective domain attainable. Numeric
algorithms in particular drive some of the most advanced systems on the planet
computing such data as weather forecasts.
Chapter 10
Searching
10.1
Sequential Search
A simple algorithm that search for a specific item inside a list. It operates
looping on each element O(n) until a match occurs or the end is reached.
1) algorithm SequentialSearch(list, item)
2)
Pre: list =
3)
Post: return index of item if found, otherwise 1
4)
index 0
5)
while index < list.Count and list[index] = item
6)
index index + 1
7)
end while
8)
if index < list.Count and list[index] = item
9)
return index
10) end if
11) return 1
12) end SequentialSearch
10.2
Probability Search
Probability search is a statistical sequential searching algorithm. In addition to

searching for an item, it takes into account its frequency by swapping it with
its predecessor in the list. The algorithm complexity still remains at O(n) but
in a non-uniform items search the more frequent items are in the first positions,
reducing list scanning time.
Figure 10.1 shows the resulting state of a list after searching for two items,
notice how the searched items have had their search probability increased after
each search operation respectively.
76
CHAPTER 10. SEARCHING
77
Figure 10.1: a) Search(12), b) Search(101)

1) algorithm ProbabilitySearch(list, item)
2)
Pre: list =
3)
Post: a boolean indicating where the item is found or not;
in the former case swap founded item with its predecessor
4)
index 0
5)
while index < list.Count and list[index] = item
6)
index index + 1
7)
end while
8)
if index list.Count or list[index] = item
9)
return false
10) end if
11) if index > 0
12)
Swap(list[index], list[index 1])
13) end if
14) return true
15) end ProbabilitySearch
10.3
Summary
In this chapter we have presented a few novel searching algorithms. We have

presented more efficient searching algorithms earlier on, like for instance the
logarithmic searching algorithm that AVL and BST trees use (defined in 3.2).
We decided not to cover a searching algorithm known as binary chop (another
name for binary search, binary chop usually refers to its array counterpart) as
CHAPTER 10. SEARCHING
78
the reader has already seen such an algorithm in 3.

Searching algorithms and their efficiency largely depends on the underlying
data structure being used to store the data. For instance it is quicker to determine whether an item is in a hash table than it is an array, similarly it is quicker
to search a BST than it is a linked list. If you are going to search for data fairly
often then we strongly advise that you sit down and research the data structures
available to you. In most cases using a list or any other primarily linear data
structure is down to lack of knowledge. Model your data and then research the
data structures that best fit your scenario.
Chapter 11
Strings
Strings have their own chapter in this text purely because string operations
and transformations are incredibly frequent within programs. The algorithms
presented are based on problems the authors have come across previously, or
were formulated to satisfy curiosity.
11.1
Reversing the order of words in a sentence
Defining algorithms for primitive string operations is simple, e.g. extracting a

sub-string of a string, however some algorithms that require more inventiveness
can be a little more tricky.
The algorithm presented here does not simply reverse the characters in a
string, rather it reverses the order of words within a string. This algorithm
works on the principal that words are all delimited by white space, and using a
few markers to define where words start and end we can easily reverse them.
79
CHAPTER 11. STRINGS
80
1) algorithm ReverseWords(value)
2)
Pre: value = , sb is a string buffer
3)
Post: the words in value have been reversed
4)
last value.Length 1
5)
start last
6)
while last 0
7)
// skip whitespace
8)
while start 0 and value[start] = whitespace
9)
start start 1
10)
end while
11)
last start
12)
// march down to the index before the beginning of the word
13)
while start 0 and start = whitespace
14)
start start 1
15)
end while
16)
// append chars from start + 1 to length + 1 to string buffer sb
17)
for i start + 1 to last
18)
sb.Append(value[i])
19)
end for
20)
// if this isnt the last word in the string add some whitespace after the word in the buffer
21)
if start > 0
22)
sb.Append( )
23)
end if
24)
last start 1
25)
start last
26) end while
27) // check if we have added one too many whitespace to sb
28) if sb[sb.Length 1] = whitespace
29)
// cut the whitespace
30)
sb.Length sb.Length 1
31) end if
32) return sb
33) end ReverseWords
11.2
Detecting a palindrome
Although not a frequent algorithm that will be applied in real-life scenarios

detecting a palindrome is a fun, and as it turns out pretty trivial algorithm to
design.
The algorithm that we present has a O(n) run time complexity. Our algorithm uses two pointers at opposite ends of string we are checking is a palindrome
or not. These pointers march in towards each other always checking that each
character they point to is the same with respect to value. Figure 11.1 shows the
IsPalindrome algorithm in operation on the string Was it Eliots toilet I saw?
If you remove all punctuation, and white space from the aforementioned string
you will find that it is a valid palindrome.
CHAPTER 11. STRINGS
81
Figure 11.1: lef t and right pointers marching in towards one another
1) algorithm IsPalindrome(value)
2)
Pre: value =
3)
Post: value is determined to be a palindrome or not
4)
word value.Strip().ToUpperCase()
5)
lef t 0
6)
right word.Length 1
7)
while word[lef t] = word[right] and lef t < right
8)
lef t lef t + 1
9)
right right 1
10) end while
11) return word[lef t] = word[right]
12) end IsPalindrome
In the IsPalindrome algorithm we call a method by the name of Strip. This
algorithm discards punctuation in the string, including white space. As a result
word contains a heavily compacted representation of the original string, each
character of which is in its uppercase representation.
Palindromes discard white space, punctuation, and case making these changes
allows us to design a simple algorithm while making our algorithm fairly robust
with respect to the palindromes it will detect.
11.3
Counting the number of words in a string
Counting the number of words in a string can seem pretty trivial at first, however
there are a few cases that we need to be aware of:
1. tracking when we are in a string
2. updating the word count at the correct place
3. skipping white space that delimits the words
As an example consider the string Ben ate hay Clearly this string contains
three words, each of which distinguished via white space. All of the previously
listed points can be managed by using three variables:
1. index
2. wordCount
3. inW ord
CHAPTER 11. STRINGS
82
Figure 11.2: String with three words
Figure 11.3: String with varying number of white space delimiting the words
Of the previously listed index keeps track of the current index we are at in
the string, wordCount is an integer that keeps track of the number of words we
have encountered, and finally inW ord is a Boolean flag that denotes whether
or not at the present time we are within a word. If we are not currently hitting
white space we are in a word, the opposite is true if at the present index we are
hitting white space.
What denotes a word? In our algorithm each word is separated by one or
more occurrences of white space. We dont take into account any particular
splitting symbols you may use, e.g. in .NET String.Split 1 can take a char (or
array of characters) that determines a delimiter to use to split the characters
within the string into chunks of strings, resulting in an array of sub-strings.
In Figure 11.2 we present a string indexed as an array. Typically the pattern
is the same for most words, delimited by a single occurrence of white space.
Figure 11.3 shows the same string, with the same number of words but with
varying white space splitting them.
1 http://msdn.microsoft.com/en-us/library/system.string.split.aspx
CHAPTER 11. STRINGS
83
1) algorithm WordCount(value)
2)
Pre: value =
3)
Post: the number of words contained within value is determined
4)
inW ord true
5)
wordCount 0
6)
index 0
7)
// skip initial white space
8)
while value[index] = whitespace and index < value.Length 1
9)
index index + 1
10) end while
11) // was the string just whitespace?
12) if index = value.Length and value[index] = whitespace
13)
return 0
14) end if
15) while index < value.Length
16)
if value[index] = whitespace
17)
// skip all whitespace
18)
while value[index] = whitespace and index < value.Length 1
19)
index index + 1
20)
end while
21)
inW ord f alse
22)
wordCount wordCount + 1
23)
else
24)
inW ord true
25)
end if
26)
index index + 1
27) end while
28) // last word may have not been followed by whitespace
29) if inW ord
30)
wordCount wordCount + 1
31) end if
32) return wordCount
33) end WordCount
11.4
Determining the number of repeated words

within a string
With the help of an unordered set, and an algorithm that can split the words
within a string using a specified delimiter this algorithm is straightforward to
implement. If we split all the words using a single occurrence of white space
as our delimiter we get all the words within the string back as elements of
an array. Then if we iterate through these words adding them to a set which
contains only unique strings we can attain the number of unique words from the
string. All that is left to do is subtract the unique word count from the total
number of stings contained in the array returned from the split operation. The
split operation that we refer to is the same as that mentioned in 11.3.
CHAPTER 11. STRINGS
84
Figure 11.4: a) Undesired uniques set; b) desired uniques set

1) algorithm RepeatedWordCount(value)
2)
Pre: value =
3)
Post: the number of repeated words in value is returned
4)
words value.Split( )
5)
uniques Set
6)
foreach word in words
7)
uniques.Add(word.Strip())
8)
end foreach
9)
return words.Length uniques.Count
10) end RepeatedWordCount
You will notice in the RepeatedWordCount algorithm that we use the Strip
method we referred to earlier in 11.1. This simply removes any punctuation
from a word. The reason we perform this operation on each word is so that
we can build a more accurate unique string collection, e.g. test, and test!
are the same word minus the punctuation. Figure 11.4 shows the undesired and
desired sets for the unique set respectively.
11.5
Determining the first matching character

between two strings
The algorithm to determine whether any character of a string matches any of the
characters in another string is pretty trivial. Put simply, we can parse the strings
considered using a double loop and check, discarding punctuation, the equality
between any characters thus returning a non-negative index that represents the
location of the first character in the match (Figure 11.5); otherwise we return
-1 if no match occurs. This approach exhibit a run time complexity of O(n2 ).
CHAPTER 11. STRINGS
85
Word
0
Match
0
0
index
a)
3
index
index
b)
Figure 11.5: a) First Step; b) Second Step c) Match Occurred

1) algorithm Any(word,match)
2)
Pre: word, match =
3)
Post: index representing match location if occured, 1 otherwise
4)
for i 0 to word.Length 1
5)
while word[i] = whitespace
6)
ii+1
7)
end while
8)
for index 0 to match.Length 1
9)
while match[index] = whitespace
10)
index index + 1
11)
end while
12)
if match[index] = word[i]
13)
return index
14)
end if
15)
end for
16) end for
17) return 1
18) end Any
11.6
Summary
We hope that the reader has seen how fun algorithms on string data types
are. Strings are probably the most common data type (and data structure remember we are dealing with an array) that you will work with so its important
that you learn to be creative with them. We for one find strings fascinating. A
simple Google search on string nuances between languages and encodings will
provide you with a great number of problems. Now that we have spurred you
along a little with our introductory algorithms you can devise some of your own.
c)
Appendix A
Algorithm Walkthrough
Learning how to design good algorithms can be assisted greatly by using a
structured approach to tracing its behaviour. In most cases tracing an algorithm
only requires a single table. In most cases tracing is not enough, you will also
want to use a diagram of the data structure your algorithm operates on. This
diagram will be used to visualise the problem more effectively. Seeing things
visually can help you understand the problem quicker, and better.
The trace table will store information about the variables used in your algorithm. The values within this table are constantly updated when the algorithm
mutates them. Such an approach allows you to attain a history of the various
values each variable has held. You may also be able to infer patterns from the
values each variable has contained so that you can make your algorithm more
efficient.
We have found this approach both simple, and powerful. By combining a
visual representation of the problem as well as having a history of past values
generated by the algorithm it can make understanding, and solving problems
much easier.
In this chapter we will show you how to work through both iterative, and
recursive algorithms using the technique outlined.
A.1
Iterative algorithms
We will trace the IsPalindrome algorithm (defined in 11.2) as our example

iterative walkthrough. Before we even look at the variables the algorithm uses,
first we will look at the actual data structure the algorithm operates on. It
should be pretty obvious that we are operating on a string, but how is this
represented? A string is essentially a block of contiguous memory that consists
of some char data types, one after the other. Each character in the string can
be accessed via an index much like you would do when accessing items within
an array. The picture should be presenting itself - a string can be thought of as
an array of characters.
For our example we will use IsPalindrome to operate on the string Never
odd or even Now we know how the string data structure is represented, and
the value of the string we will operate on lets go ahead and draw it as shown
in Figure A.1.
86
APPENDIX A. ALGORITHM WALKTHROUGH
87
Figure A.1: Visualising the data structure we are operating on

value
word
lef t
right
Table A.1: A column for each variable we wish to track

The IsPalindrome algorithm uses the following list of variables in some form
throughout its execution:
1. value
2. word
3. lef t
4. right
Having identified the values of the variables we need to keep track of we
simply create a column for each in a table as shown in Table A.1.
Now, using the IsPalindrome algorithm execute each statement updating
the variable values in the table appropriately. Table A.2 shows the final table
values for each variable used in IsPalindrome respectively.
While this approach may look a little bloated in print, on paper it is much
more compact. Where we have the strings in the table you should annotate
these strings with array indexes to aid the algorithm walkthrough.
There is one other point that we should clarify at this time - whether to
include variables that change only a few times, or not at all in the trace table.
In Table A.2 we have included both the value, and word variables because it
was convenient to do so. You may find that you want to promote these values
to a larger diagram (like that in Figure A.1) and only use the trace table for
variables whose values change during the algorithm. We recommend that you
promote the core data structure being operated on to a larger diagram outside
of the table so that you can interrogate it more easily.
value
Never odd or even
word
NEVERODDOREVEN
lef t
0
1
2
3
4
5
6
7
Table A.2: Algorithm trace for IsPalindrome
right
13
12
11
10
9
8
7
6
88
We cannot stress enough how important such traces are when designing
your algorithm. You can use these trace tables to verify algorithm correctness.
At the cost of a simple table, and quick sketch of the data structure you are
operating on you can devise correct algorithms quicker. Visualising the problem
domain and keeping track of changing data makes problems a lot easier to solve.
Moreover you always have a point of reference which you can look back on.
A.2
Recursive Algorithms
For the most part working through recursive algorithms is as simple as walking
through an iterative algorithm. One of the things that we need to keep track
of though is which method call returns to who. Most recursive algorithms are
much simple to follow when you draw out the recursive calls rather than using
a table based approach. In this section we will use a recursive implementation
of an algorithm that computes a number from the Fiboncacci sequence.
1) algorithm Fibonacci(n)
2)
Pre: n is the number in the fibonacci sequence to compute
3)
Post: the fibonacci sequence number n has been computed
4)
if n < 1
5)
return 0
6)
else if n < 2
7)
return 1
8)
end if
9)
return Fibonacci(n 1) + Fibonacci(n 2)
10) end Fibonacci
Before we jump into showing you a diagrammtic representation of the algorithm calls for the Fibonacci algorithm we will briefly talk about the cases of
the algorithm. The algorithm has three cases in total:
1. n < 1
2. n < 2
3. n 2
The first two items in the preceeding list are the base cases of the algorithm.
Until we hit one of our base cases in our recursive method call tree we wont
return anything. The third item from the list is our recursive case.
With each call to the recursive case we etch ever closer to one of our base
cases. Figure A.2 shows a diagrammtic representation of the recursive call chain.
In Figure A.2 the order in which the methods are called are labelled. Figure
A.3 shows the call chain annotated with the return values of each method call
as well as the order in which methods return to their callers. In Figure A.3 the
return values are represented as annotations to the red arrows.
It is important to note that each recursive call only ever returns to its caller
upon hitting one of the two base cases. When you do eventually hit a base case
that branch of recursive calls ceases. Upon hitting a base case you go back to
Figure A.2: Call chain for Fibonacci algorithm
Figure A.3: Return chain for Fibonacci algorithm
89
90
the caller and continue execution of that method. Execution in the caller is
contiued at the next statement, or expression after the recursive call was made.
In the Fibonacci algorithms recursive case we make two recursive calls.
When the first recursive call (Fibonacci(n 1)) returns to the caller we then
execute the the second recursive call (Fibonacci(n 2)). After both recursive
calls have returned to their caller, the caller can then subesequently return to
its caller and so on.
Recursive algorithms are much easier to demonstrate diagrammatically as
Figure A.2 demonstrates. When you come across a recursive algorithm draw
method call diagrams to understand how the algorithm works at a high level.
A.3
Summary
Understanding algorithms can be hard at times, particularly from an implementation perspective. In order to understand an algorithm try and work through
it using trace tables. In cases where the algorithm is also recursive sketch the
recursive calls out so you can visualise the call/return chain.
In the vast majority of cases implementing an algorithm is simple provided
that you know how the algorithm works. Mastering how an algorithm works
from a high level is key for devising a well designed solution to the problem in
hand.
Appendix B
Translation Walkthrough
The conversion from pseudo to an actual imperative language is usually very
straight forward, to clarify an example is provided. In this example we will
convert the algorithm in 9.1 to the C# language.
1) public static bool IsPrime(int number)
2) {
3)
if (number < 2)
4)
{
5)
return false;
6)
}
7)
int innerLoopBound = (int)Math.Floor(Math.Sqrt(number));
8)
for (int i = 1; i < number; i++)
9)
{
10)
for(int j = 1; j <= innerLoopBound; j++)
11)
{
12)
if (i j == number)
13)
{
14)
return false;
15)
}
16)
}
17) }
18) return true;
19) }
For the most part the conversion is a straight forward process, however you
may have to inject various calls to other utility algorithms to ascertain the
correct result.
A consideration to take note of is that many algorithms have fairly strict
preconditions, of which there may be several - in these scenarios you will need
to inject the correct code to handle such situations to preserve the correctness of
the algorithm. Most of the preconditions can be suitably handled by throwing
the correct exception.
91
APPENDIX B. TRANSLATION WALKTHROUGH
B.1
92
Summary
As you can see from the example used in this chapter we have tried to make the
translation of our pseudo code algorithms to mainstream imperative languages
as simple as possible.
Whenever you encounter a keyword within our pseudo code examples that
you are unfamiliar with just browse to Appendix E which descirbes each keyword.
Appendix C
Recursive Vs. Iterative

Solutions
One of the most succinct properties of modern programming languages like
C++, C#, and Java (as well as many others) is that these languages allow
you to define methods that reference themselves, such methods are said to be
recursive. One of the biggest advantages recursive methods bring to the table is
that they usually result in more readable, and compact solutions to problems.
A recursive method then is one that is defined in terms of itself. Generally
a recursive algorithms has two main properties:
1. One or more base cases; and
2. A recursive case
For now we will briefly cover these two aspects of recursive algorithms. With
each recursive call we should be making progress to our base case otherwise we
are going to run into trouble. The trouble we speak of manifests itself typically
as a stack overflow, we will describe why later.
Now that we have briefly described what a recursive algorithm is and why
you might want to use such an approach for your algorithms we will now talk
about iterative solutions. An iterative solution uses no recursion whatsoever.
An iterative solution relies only on the use of loops (e.g. for, while, do-while,
etc). The down side to iterative algorithms is that they tend not to be as clear
as to their recursive counterparts with respect to their operation. The major
advantage of iterative solutions is speed. Most production software you will
find uses little or no recursive algorithms whatsoever. The latter property can
sometimes be a companies prerequisite to checking in code, e.g. upon checking
in a static analysis tool may verify that the code the developer is checking in
contains no recursive algorithms. Normally it is systems level code that has this
zero tolerance policy for recursive algorithms.
Using recursion should always be reserved for fast algorithms, you should
avoid it for the following algorithm run time deficiencies:
1. O(n2 )
2. O(n3 )
93
APPENDIX C. RECURSIVE VS. ITERATIVE SOLUTIONS
94
3. O(2n )
If you use recursion for algorithms with any of the above run time efficiencys
you are inviting trouble. The growth rate of these algorithms is high and in
most cases such algorithms will lean very heavily on techniques like divide and
conquer. While constantly splitting problems into smaller problems is good
practice, in these cases you are going to be spawning a lot of method calls. All
this overhead (method calls dont come that cheap) will soon pile up and either
cause your algorithm to run a lot slower than expected, or worse, you will run
out of stack space. When you exceed the allotted stack space for a thread the
process will be shutdown by the operating system. This is the case irrespective
of the platform you use, e.g. .NET, or native C++ etc. You can ask for a bigger
stack size, but you typically only want to do this if you have a very good reason
to do so.
C.1
Activation Records
An activation record is created every time you invoke a method. Put simply
an activation record is something that is put on the stack to support method
invocation. Activation records take a small amount of time to create, and are
pretty lightweight.
Normally an activation record for a method call is as follows (this is very
general):
The actual parameters of the method are pushed onto the stack
The return address is pushed onto the stack
The top-of-stack index is incremented by the total amount of memory
required by the local variables within the method
A jump is made to the method
In many recursive algorithms operating on large data structures, or algorithms that are inefficient you will run out of stack space quickly. Consider an
algorithm that when invoked given a specific value it creates many recursive
calls. In such a case a big chunk of the stack will be consumed. We will have to
wait until the activation records start to be unwound after the nested methods
in the call chain exit and return to their respective caller. When a method exits
its activation record is unwound. Unwinding an activation record results in
several steps:
1. The top-of-stack index is decremented by the total amount of memory
consumed by the method
2. The return address is popped off the stack
3. The top-of-stack index is decremented by the total amount of memory
consumed by the actual parameters
95
While activation records are an efficient way to support method calls they
can build up very quickly. Recursive algorithms can exhaust the stack size
allocated to the thread fairly fast given the chance.
Just about now we should be dusting the cobwebs off the age old example of
an iterative vs. recursive solution in the form of the Fibonacci algorithm. This
is a famous example as it highlights both the beauty and pitfalls of a recursive
algorithm. The iterative solution is not as pretty, nor self documenting but it
does the job a lot quicker. If we were to give the Fibonacci algorithm an input
of say 60 then we would have to wait a while to get the value back because it
has an O(g n ) run time. The iterative version on the other hand has a O(n)
run time. Dont let this put you off recursion. This example is mainly used
to shock programmers into thinking about the ramifications of recursion rather
than warning them off.
C.2
Some problems are recursive in nature
Something that you may come across is that some data structures and algorithms are actually recursive in nature. A perfect example of this is a tree data
structure. A common tree node usually contains a value, along with two pointers to two other nodes of the same node type. As you can see tree is recursive
in its makeup wit each node possibly pointing to two other nodes.
When using recursive algorithms on trees it makes sense as you are simply
adhering to the inherent design of the data structure you are operating on. Of
course it is not all good news, after all we are still bound by the limitations we
have mentioned previously in this chapter.
We can also look at sorting algorithms like merge sort, and quick sort. Both
of these algorithms are recursive in their design and so it makes sense to model
them recursively.
C.3
Summary
Recursion is a powerful tool, and one that all programmers should know of.
Often software projects will take a trade between readability, and efficiency in
which case recursion is great provided you dont go and use it to implement
an algorithm with a quadratic run time or higher. Of course this is not a rule
of thumb, this is just us throwing caution to the wind. Defensive coding will
always prevail.
Many times recursion has a natural home in recursive data structures and
algorithms which are recursive in nature. Using recursion in such scenarios is
perfectly acceptable. Using recursion for something like linked list traversal is
a little overkill. Its iterative counterpart is probably less lines of code than its
recursive counterpart.
Because we can only talk about the implications of using recursion from an
abstract point of view you should consult your compiler and run time environment for more details. It may be the case that your compiler recognises things
like tail recursion and can optimise them. This isnt unheard of, in fact most
commercial compilers will do this. The amount of optimisation compilers can
96
do though is somewhat limited by the fact that you are still using recursion.
You, as the developer have to accept certain accountabilitys for performance.
Appendix D
Testing
Testing is an essential part of software development. Testing has often been
discarded by many developers in the belief that the burden of proof of their
software is on those within the company who hold test centric roles. This
couldnt be further from the truth. As a developer you should at least provide
a suite of unit tests that verify certain boundary conditions of your software.
A great thing about testing is that you build up progressively a safety net. If
you add or tweak algorithms and then run your suite of tests you will be quickly
alerted to any cases that you have broken with your recent changes. Such a suite
of tests in any sizeable project is absolutely essential to maintaining a fairly high
bar when it comes to quality. Of course in order to attain such a standard you
need to think carefully about the tests that you construct.
Unit testing which will be the subject of the vast majority of this chapter
are widely available on most platforms. Most modern languages like C++, C#,
and Java offer an impressive catalogue of testing frameworks that you can use
for unit testing.
The following list identifies testing frameworks which are popular:
JUnit: Targeted at Jav., http://www.junit.org/
NUnit: Can be used with languages that target Microsofts Common Language
Runtime. http://www.nunit.org/index.php
Boost Test Library: Targeted at C++. The test library that ships with the incredibly popular
Boost libraries. http://www.boost.org. A direct link to the libraries documentation http://www.boost.org/doc/libs/1_36_0/libs/test/doc/
html/index.html
CppUnit: Targeted at C++. http://cppunit.sourceforge.net/
Dont worry if you think that the list is very sparse, there are far more on
offer than those that we have listed. The ones listed are the testing frameworks
that we believe are the most popular for C++, C#, and Java.
D.1
What constitutes a unit test?
A unit test should focus on a single atomic property of the subject being tested.
Do not try and test many things at once, this will result in a suite of somewhat
97
APPENDIX D. TESTING
98
unstructured tests. As an example if you were wanting to write a test that

verified that a particular value V is returned from a specific input I then your
test should do the smallest amount of work possible to verify that V is correct
given I. A unit test should be simple and self describing.
As well as a unit test being relatively atomic you should also make sure that
your unit tests execute quickly. If you can imagine in the future when you may
have a test suite consisting of thousands of tests you want those tests to execute
as quickly as possible. Failure to attain such a goal will most likely result in
the suite of tests not being ran that often by the developers on your team. This
can occur for a number of reasons but the main one would be that it becomes
incredibly tedious waiting several minutes to run tests on a developers local
machine.
Building up a test suite can help greatly in a team scenario, particularly
when using a continuous build server. In such a scenario you can have the suite
of tests devised by the developers and testers ran as part of the build process.
Employing such strategies can help you catch niggling little error cases early
rather than via your customer base. There is nothing more embarrassing for a
developer than to have a very trivial bug in their code reported to them from a
customer.
D.2
When should I write my tests?
A source of great debate would be an understatement to personify such a question as this. In recent years a test driven approach to development has become
very popular. Such an approach is known as test driven development, or more
commonly the acronym TDD.
One of the founding principles of TDD is to write the unit test first, watch
it fail and then make it pass. The premise being that you only ever write
enough code at any one time to satisfy the state based assertions made in a unit
test. We have found this approach to provide a more structured intent to the
implementation of algorithms. At any one stage you only have a single goal, to
make the failing test pass. Because TDD makes you write the tests up front you
never find yourself in a situation where you forget, or cant be bothered to write
tests for your code. This is often the case when you write your tests after you
have coded up your implementation. We, as the authors of this book ourselves
use TDD as our preferred method.
As we have already mentioned that TDD is our favoured approach to testing
it would be somewhat of an injustice to not list, and describe the mantra that
is often associate with it:
Red: Signifies that the test has failed.
Green: The failing test now passes.
Refactor: Can we restructure our program so it makes more sense, and easier to
maintain?
The first point of the above list always occurs at least once (more if you count
the build error) in TDD initially. Your task at this stage is solely to make the
test pass, that is to make the respective test green. The last item is based around
APPENDIX D. TESTING
99
the restructuring of your program to make it as readable and maintainable as

possible. The last point is very important as TDD is a progressive methodology
to building a solution. If you adhere to progressive revisions of your algorithm
restructuring when appropriate you will find that using TDD you can implement
very cleanly structured types and so on.
D.3
How seriously should I view my test suite?
Your tests are a major part of your project ecosystem and so they should be
treated with the same amount of respect as your production code. This ranges
from correct, and clean code formatting, to the testing code being stored within
a source control repository.
Employing a methodology like TDD, or testing after implementing you will
find that you spend a great amount of time writing tests and thus they should
be treated no differently to your production code. All tests should be clearly
named, and fully documented as to their intent.
D.4
The three As
Now that you have a sense of the importance of your test suite you will inevitably
want to know how to actually structure each block of imperatives within a single
unit test. A popular approach - the three As is described in the following list:
Assemble: Create the objects you require in order to perform the state based assertions.
Act: Invoke the respective operations on the objects you have assembled to
mutate the state to that desired for your assertions.
Assert: Specify what you expect to hold after the previous two steps.
The following example shows a simple test method that employs the three
As:
public void MyTest()
{
// assemble
Type t = new Type();
// act
t.MethodA();
// assert
Assert.IsTrue(t.BoolExpr)
}
D.5
The structuring of tests
Structuring tests can be viewed upon as being the same as structuring production code, e.g. all unit tests for a Person type may be contained within
APPENDIX D. TESTING
100
a PersonTest type. Typically all tests are abstracted from production code.
That is that the tests are disjoint from the production code, you may have two
dynamic link libraries (dll); the first containing the production code, the second
containing your test code.
We can also use things like inheritance etc when defining classes of tests.
The point being that the test code is very much like your production code and
you should apply the same amount of thought to its structure as you would do
the production code.
D.6
Code Coverage
Something that you can get as a product of unit testing are code coverage
statistics. Code coverage is merely an indicator as to the portions of production
code that your units tests cover. Using TDD it is likely that your code coverage
will be very high, although it will vary depending on how easy it is to use TDD
within your project.
D.7
Summary
Testing is key to the creation of a moderately stable product. Moreover unit

testing can be used to create a safety blanket when adding and removing features
providing an early warning for breaking changes within your production code.
Appendix E
Symbol Definitions
Throughout the pseudocode listings you will find several symbols used, describes
the meaning of each of those symbols.
Symbol
<
>
=
and
or
whitespace
yield
Description
Assignment.
Equality.
Less than or equal to.
Less than.*
Greater than or equal to.
Greater than.*
Inequality.
Null.
Logical and.
Logical or.
Single occurrence of whitespace.
Like return but builds a sequence.
Table E.1: Pseudo symbol definitions

* This symbol has a direct translation with the vast majority of imperative
counterparts.
101

Data Sructures and Algorithms

Uploaded by

Copyright:

Available Formats

Data Sructures and Algorithms

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Data Sructures and Algorithms

Uploaded by

Copyright:

Available Formats

Data Structures and Algorithms

Luca Del Tongo

Data Structures and Algorithms:

This book is made exclusively available from DotNetSlackers

3 Binary Search Tree

About the Authors

Luca Del Tongo

Page intentionally left blank.

What this book is, and what it isnt

This book provides implementations of common and uncommon algorithms in

Figure 1.1: Algorithmic run time expansion

Imperative programming language

Object oriented concepts

3. The type of parameters is inferred

Tips for working through the examples

We have split this book into two parts:

Where can I get the code?

Singly Linked List

CHAPTER 2. LINKED LISTS

Figure 2.1: Singly linked list node

Figure 2.2: A singly linked list populated with integers

Searching a linked list is straightforward: we simply traverse the list checking

CHAPTER 2. LINKED LISTS

1) algorithm Contains(head, value)

CHAPTER 2. LINKED LISTS

1) algorithm Remove(head, value)

Traversing the list

CHAPTER 2. LINKED LISTS

Traversing the list in reverse order

Doubly Linked List

CHAPTER 2. LINKED LISTS

Figure 2.3: Reverse traveral of a singly linked list

Figure 2.4: Doubly linked list node

CHAPTER 2. LINKED LISTS

Figure 2.5: Doubly linked list populated with integers

CHAPTER 2. LINKED LISTS

1) algorithm Remove(head, value)

CHAPTER 2. LINKED LISTS

Figure 2.6: Doubly linked list reverse traversal

CHAPTER 2. LINKED LISTS

Binary Search Tree

Figure 3.1: Simple unbalanced binary search tree

CHAPTER 3. BINARY SEARCH TREE

As mentioned previously insertion is an O(log n) operation provided that the

CHAPTER 3. BINARY SEARCH TREE

Searching a BST is even simpler than insertion. The pseudocode is self-explanatory

CHAPTER 3. BINARY SEARCH TREE

and left subtree

#3: Left subtree

#2: Right subtree

#1: Leaf Node

Figure 3.2: binary search tree deletion cases

CHAPTER 3. BINARY SEARCH TREE

CHAPTER 3. BINARY SEARCH TREE

Finding the parent of a given node

The purpose of this algorithm is simple - to return a reference (or pointer) to

Attaining a reference to a node

CHAPTER 3. BINARY SEARCH TREE

1) algorithm FindNode(root, value)

Finding the smallest and largest values in