Imperial Hose Product Guide

Imperial Hose Product Guide
INDUSTRIAL MUNICIPAL FORESTRY

Contents
3 PERM-I-DENT II Hose Coating
4 Industrial Fire and General Purpose Hose
6 Municipal Fire and Forestry Hose
8 Couplings
Imperial Hose, Quality Products That Perform
Imperial, part of the Kidde Fire Fighting organization, is a quality brand of
woven jacket and rubber fire and industrial hose and hose products.
Products manufactured from high quality raw materials to exacting
standards make Imperial hose a durable and reliable performer, offering a
complete range of products for general purpose use, industrial, municipal
and forestry fire fighting.
All Imperial woven jacket products are
available with our new, unique, innovative
abrasion resistant coating. PERM-I-DENT II
completely encapsulates the fibers of our
jacket, providing a long lasting, vibrant color
shield against the rough treatment that fire
hose is exposed to every day.
PERM-I-DENT II displays extreme resistance
to bacterial and mildew growth as well.
PERM-I-DENT II Hose Coating
Quality you can count on
When subjected to the Mil-H-24606B Taber
Abrader test, PERM-I-DENT II surpassed the
minimum requirement by 6 times compared
to other hose manufacturers. This coating is
available on Imperial 70D6, 70S6, 70S5,
70S3, 70D8, Polylite, 40D8, and Paclite hose
products.
Specify PERM-I-DENT II to ensure that you get
the very best abrasion resistant protection.
PERM-I-DENT II is offered in six vibrant
NFPA recommended colors; red, yellow,
orange, blue, green and tan.
TM
Imperial 70D6
Polyester Double Jacket
Rubber Lined Fire Hose
This heavy duty double jacket industrial fire hose is designed for daily use where higher pressure and additional abrasion resistance is
required. Construction of 100% high tensile strength virgin polyester yarns, both warp and filler, provides extra durability. Hose comes
standard with E.P.D.M. lining. U.L. labeling is available in 1-1/2, 1-3/4, and 2-1/2 sizes. The standard color for Imperial 70D6 Hose
is white. Other colors available with our innovative PERM-I-DENT II abrasion resistant coatings are red, yellow, orange, blue, green and
tan.
Imperial 70S6
Polyester Single Jacket
A single jacket, polyester industrial fire hose with an ozone-resistant E.P.D.M. rubber lining. The spun polyester yarn in the jacket offers
superior strength and wear characteristics. Designed for interior or exterior fire protection, Imperial 70S6 is NFPAcompliant as an attack
hose. The polyester construction is mildew resistant. The standard color for Imperial 70S6 Hose is white. Other colors available with
our innovative PERM-I-DENT II abrasion resistant coatings are red, yellow, orange, blue, green and tan.
Imperial 70S5
superior strength and wear characteristics. The polyester construction is mildew resistant. U.L. labeling is available in 1-1/2 and 2-1/2
sizes. The standard color for Imperial 70S5 Hose is white. Other colors available with our innovative PERM-I-DENT II abrasion resistant
coatings are red, yellow, orange, blue, green and tan.
Imperial 70S3
superior strength and wear characteristics. The polyester construction is mildew resistant. U.L. labeling is available in 1-1/2 and 2-
1/2 sizes. The standard color for Imperial 70S3 Hose is white. Other colors available with our innovative PERM-I-DENT II abrasion
resistant coatings are red, yellow, orange, blue, green and tan.
Industrial Fire and General Purpose Hose
Imperial 70D6
Pressure Weight* Coil Diameter
Size Service Proof Burst Bowl Size 50' (15m) 50' (15m)
inch mm psi kPa psi kPa psi kPa inch mm lbs. kg inch mm
1-1/2 38 300 2100 600 4200 900 6300 1-15/16 49 15 6.8 18 457
1-3/4 45 300 2100 600 4200 900 6300 2-1/8 54 22 9.9 18 457
2-1/2 65 300 2100 600 4200 900 6300 3 76 31 14.0 21 533
3 75 300 2100 600 4200 900 6300 3-9/16 90 38 17.1 21 533
Imperial 70S6
1-1/2 38 300 2100 600 4200 900 6300 1-13/16 46 11 5.0 15 381
2-1/2 65 300 2100 600 4200 900 6300 2-7/8 73 22 9.9 16 406
Imperial 70S5
1-1/2 38 250 1750 500 3500 750 5250 1-13/16 46 11 5.0 15 381
2-1/2 65 250 1750 500 3500 750 5250 2-7/8 73 22 9.9 16 406
Imperial 70S3
1-1/2 38 150 1050 300 2100 450 3150 1-13/16 46 11 5.0 15 381
2-1/2 65 150 1050 300 2100 450 3150 2-7/8 73 22 9.9 16 406
4
Imperial 662
Through-The-Weave
Industrial Fire Hose
Imperial 662 is a layflat, lightweight, flexible fire hose specifically designed for industrial fire protection. Imperial 662 is U.L. approved
and features a unique through-the-weave, one piece construction that will not delaminate. The synthetic reinforcement is totally
encased in a PVC nitrile rubber cover and lining which is resistant to fuels, oils, chemicals, abrasion, heat, mildew, rot, and ozone. The
standard colors for Imperial 662 are red and yellow.
Imperial 662
1-1/2 38 250 1750 500 3500 750 5250 1-3/4 44 10 4.5 12 305
1-3/4 45 250 1750 500 3500 750 5250 2 51 14 6.3 14 356
2 50 250 1750 500 3500 750 5250 2-3/16 56 18 8.1 14 356
2-1/2 65 250 1750 500 3500 750 5250 2-3/4 70 19 8.6 14 356
Imperial M
Single Jacket Polyester
Mill Hose
A heavy duty industrial mill hose, constructed of 100% spun polyester for abrasive environments and low maintenance. Designed for
water discharge and other low pressure applications such as washdown. The liner is SBR for petrochemical resistance. The standard
color for Imperial M is white.
Imperial 661
Lightweight Through-The-Weave
Washdown Hose
Imperial 661 is a layflat, lightweight, flexible maintenance hose with the durability and abrasion resistance of heavy duty rubber hose.
Imperial 661 features a unique through-the-weave, one piece construction that will not delaminate. The synthetic reinforcement is totally
encased in nitrile rubber cover and lining which is resistant to fuels, chemicals, and oil. Imperial 661 will not mildew or rot and is heat
and ozone resistant. The standard color for Imperial 661 is blue.
Imperial 661
1-1/2 38 225 1575 450 3150 750 5250 1-3/4 44 10 4.5 12 305
2 50 225 1575 450 3150 750 5250 2-3/16 56 15 6.8 13 330
2-1/2 65 225 1575 450 3150 750 5250 2-3/4 70 19 8.6 14 356
Imperial AG
Heavy Duty Rubber Covered
Industrial Discharge Hose
Imperial AG is a layflat, flexible water discharge hose with durability and abrasion resistance superior to conventional rubber hose.
Imperial AG features a unique one piece, through-the-weave construction, and attains its exceptional working pressure from a synthetic
woven textile. Its excellent durability is derived from a high-tensile rubber compound which completely encases the jacket. The standard
color for Imperial AG is black.
Imperial M
1 25 125 875 250 1750 500 3500 1-1/4 32 8 3.6 13 330
1-1/2 38 125 875 250 1750 500 3500 1-11/16 43 10 4.5 14 356
2 50 125 875 250 1750 500 3500 2-3/8 60 16 7.2 15 381
2-1/2 65 125 875 250 1750 500 3500 2-11/16 68 20 9.0 15 381
3 75 125 875 250 1750 500 3500 3-3/8 86 27 12.2 17 432
5
Imperial AG
1-1/2 38 300 2100 600 4200 900 6300 1-13/16 45 16 7.2 15 381
2 50 300 2100 600 4200 900 6300 2-3/16 56 20 9.0 16 406
2-1/2 65 300 2100 600 4200 900 6300 2-7/8 73 25 11.3 17 432
3 75 300 2100 600 4200 900 6300 3-13/32 87 35 15.8 18 457
4 100 200 1400 400 2800 600 4200 4-5/16 110 40 18.0 19 483
6 150 200 1400 400 2800 600 4200 6-3/8 162 80 36.0 21 533
* Weight is uncoupled
Factory Mutual Approved
Imperial 90NR
Polyester Single Jacket Rack
and Reel Hose
This interior fire protection hose is designed to replace unlined linen length for length. This polyester, urethane lined hose is ideal for
interior rack or reel service. Imperial 90NR is available folded for standard pin racks in 50' (15m), 75 (22.5m), and 100 (30m) lengths.
Specify folded, coiled, or number of pins for rack (15 pins for 50, 20 pins for 75, or 25 pins for 100). The standard color for Imperial
90NR is white. UL Label and (or) FM approval is available on 1-1/2 size.
Imperial 90NR
1-1/2 38 250 1750 500 3500 750 5250 1-11/16 43 5 2.3 12 305
2-1/2 65 250 1750 500 3500 750 5250 2-11/16 68 13 5.9 17 432
Imperial Polylite
Polyester Double Jacket
Urethane Lined Fire Hose
Imperial Polylite is a lightweight hose that utilizes a thin, high tensile thermoplastic lining to minimize weight. Both the inner and outer
jackets are constructed of polyester warp yarns and filament polyester filler yarns. Imperial Polylites lining meets the NSF (National
Sanitation Foundation) Standard 61 for potable water and has a tensile strength of over 5000 psi (35,000 kPa). Imperial Polylite is U.L.
Listed. The standard color for Imperial Polylite Hose is white. Other colors available with our innovative PERM-I-DENT II abrasion
resistant coatings are red, yellow, orange, blue, green and tan.
Imperial 40D8
Nylon Double Jacket
Imperial 40D8 is constructed of high strength, low stretch entangled filament polyamide/Cordura fibers over a rubber, ozone proof,
E.P.D.M. tube. Imperial 40D8 is available with our innovative PERM-I-DENT II abrasion resistant coating. The standard colors are red,
yellow, orange, blue, green and tan.
Imperial Paclite
Nylon Double Jacket
Urethane Lined Fire Hose
Imperial Paclite utilizes high strength, low stretch entangled filament polyamide/cordura fibers to produce a highly abrasion-resistant
lightweight hose. The high-tech thermoplastic lining also contributes to reducing the overall weight of the hose. Imperial Paclites lining
has a tensile strength of over 5000 psi (35,000 kPa). Imperial Paclite Hose is available with our innovative PERM-I-DENT II abrasion
resistant coating. The standard colors are red, yellow, orange, blue, green and tan.
Imperial 70D8
Polyester Double Jacket Rubber
Lined Fire Hose
Imperial 70D8 is the ultimate in quality, municipal grade fire hose. This durable, double jacket hose is constructed of 100% high tensile
strength polyester yarns, both warp and filler, and lined with a high-tech E.P.D.M. tube. Its engineered design guarantees minimum
weight with maximum durability and flexibility. The standard color for Imperial 70D8 Hose is white. Other colors available with our
innovative PERM-I-DENT II abrasion resistant coatings are red, yellow, orange, blue, green and tan.
Imperial 40D8
1-1/2 38 400 2800 800 5600 1200 8400 1-15/16 49 14 6.3 18 457
1-3/4 45 400 2800 800 5600 1200 8400 2-1/8 54 18 8.1 18 457
2-1/2 65 400 2800 800 5600 1200 8400 3 76 25 11.3 20 508
3 75 400 2800 800 5600 1200 8400 3-9/16 90 35 15.8 21 533
Imperial Paclite
1-1/2 38 400 2800 800 5600 1200 8400 1-15/16 49 12 5.4 16 406
1-3/4 45 400 2800 800 5600 1200 8400 2-1/8 54 14 6.3 16 406
2-1/2 65 400 2800 800 5600 1200 8400 3 76 19 8.6 18 457
3 75 400 2800 800 5600 1200 8400 3-9/16 90 28 12.6 19 483
Imperial 70D8
1-1/2 38 400 2800 800 5600 1200 8400 1-15/16 49 15 6.8 18 457
1-3/4 45 400 2800 800 5600 1200 8400 2-1/8 54 22 9.9 18 457
2-1/2 65 400 2800 800 5600 1200 8400 3 76 31 14.0 21 533
3 75 400 2800 800 5600 1200 8400 3-9/16 90 42 18.9 21 533
Imperial Polylite
1-1/2 38 400 2800 800 5600 1200 8400 1-15/16 49 12 5.4 16 406
1-3/4 45 400 2800 800 5600 1200 8400 2-1/8 54 14 6.3 16 406
2-1/2 65 400 2800 800 5600 1200 8400 3 76 25 11.3 19 483
3 75 400 2800 800 5600 1200 8400 3-9/16 90 31 14.0 19 483
6
Municipal Fire and Forestry Hose
Imperial Superflow
Large Diameter Supply Hose
Imperial Superflow is a tough large diameter hose with the ability to deliver more water at a lower cost. But it doesnt stop there. It is
lightweight, compact and durable with a high resistance to oils, chemicals, ozone and heat. Its tough, high tensile cover and lining,
permanently interlocked with the synthetic reinforcement, provide greater abrasion resistance while being snag-proof, kink resistant, and
immune to mildew or rot. U.L. labeling is available on 4 (100 mm) and 5 (125 mm) only. The standard color for Imperial Superflow is
yellow.
Imperial Superflow
3 75 300 2100 600 4200 900 6300 3-13/32 87 70 31.5 25 635
4 100 225 1575 450 3150 675 4725 4-5/16 110 90 40.5 24 610
5 125 200 1400 400 2800 600 4200 5-3/8 137 109 49.1 27 686
7
Imperial Superlite
High Rise Fire Hose
Imperial Superlite is an ultra-lightweight, maneuverable, nitrile rubber hose designed specifically for fighting fires in high rise buildings.
The lightweight through-the-weave construction is heat and puncture resistant, kink resistant and has low friction loss. The rubber cover
prevents water from penetrating the reinforcement thus minimizing the weight of the hose when in service. The standard color for
Imperial Superlite is blue.
Imperial Superlite
1-1/2 38 300 2100 600 4200 900 6300 1-3/4 44 11 5.0 13 330
2 50 300 2100 600 4200 900 6300 2-3/16 56 18 8.1 14 356
2-1/2 65 300 2100 600 4200 900 6300 2-3/4 70 20 9.0 15 381
Imperial 629
Rubber Covered
Through-The-Weave Forestry Hose
Nitrile rubber covered forestry hoses that require no washing or drying and are mildew resistant. A protective rubber covering resists
burns and prevents damage of the textile reinforcement which may be caused by abrasion or hot embers. The standard color is high
visibility yellow. There is a minimum order quantity for 1-1/2 size.
Imperial F187
Plastic Lined Forestry Hose
Alightweight polyester jacket, polyurethane lined forestry fire hose that meets the USDA-US Forest Service Specification 5100-187. The
standard color for Imperial F187 is white. Other colors available are yellow.
Imperial 629
1 25 300 2100 600 4200 900 6300 1-1/4 31.8 10 4.5 16 406
1-1/2 38 300 2100 600 4200 900 6300 1-11/16 42.9 17 7.5 18 457
Imperial F187
1 25 300 2100 600 4200 900 6300 1-1/4 31.8 7.5 3.4 14 356
1-1/2 38 300 2100 600 4200 900 6300 1-3/4 45 13.5 6.1 16 406
* Weight is uncoupled
Non-standard diameters available by special arrangement
Imperial Super Attack
Lightweight Attack Hose
Imperial Super Attack is a lightweight nitrile rubber through-the-weave construction fire hose. Its synthetic jacket is completely protected
and locked in by a rubber cover and lining for extra toughness and durability. A heavy rib construction makes this hose resistant to cuts,
punctures, impact and abrasion. Imperial Super Attack is a 600 psi (4200 kPa) fire hose that withstands temperatures from 1200F to
37F, (649C to 38C). Its light-weight design is virtually non-kinking and ideal for municipal fire protection. The standard colors for
Imperial Super Attack are yellow and red, 1 size is available in yellow only.
Imperial Super Attack
1 25 300 2100 600 4200 900 6300 1-1/4 32 8 3.6 15 381
1-1/2 38 300 2100 600 4200 900 6300 1-13/16 46 16 7.3 16 406
1-3/4 45 300 2100 600 4200 900 6300 2-1/16 52 18 8.2 16 406
2 50 300 2100 600 4200 900 6300 2-5/16 59 20 9.1 17 432
2-1/2 65 300 2100 600 4200 900 6300 2-7/8 73 27 12.2 18 457
3 75 300 2100 600 4200 900 6300 3-13/32 87 33 15.0 18 457
Imperial
150 Gordon Drive
Exton, PA 19341
Tel: (800) 334-3156 / (1) 610-363-1400
Fax: (800) 273-6172 / (1) 610-524-9073
www.Kidde-Fire.com
NH NPSH Storz Storz
Hose Type RL RL PL RL RL PL Expansion Clamp
Size Aluminum Brass Brass Aluminum Brass Brass Ring
F187
1" x
1-1/2" x x
90NR and M
1 " x x
1-1/2" x x x x x x
2" x x x
2-1/2" x x x x x x
3" x x
70S6, 70S5, and 70S3
1-1/2" x x x x x x
2-1/2" x x x x x x
70D8, POLYLITE, 40D8, PACLITE and 70D6
1-1/2" x x x x x x
1-3/4" x x
2-1/2" x x x x x
3" x x
4" x x
5" x x
SUPERLITE, 661, 662
1-1/2" x x x x x x
1-3/4" x x
2" x
2-1/2" x x x
3" x x
SUPER ATTACK, 629, AG
1" x x
1-1/2" x x x x x x
1-3/4" x x x
2" x x x x
2-1/2" x x x x x x
3" x x
AG, SUPERFLOW
3" x x x
4" x x
5 x x x
Legend
NH = National Standard Thread RL = Rocker Lug
NPSH = National Straight Pipe Thread PL = Pin Lug
The chart below indicates standard couplings offered for
each type and size of Imperial hose products.
Please consult your dealer for other available coupling
options.
Imperial recommends annual hydrostatic service testing
of all hoses in accordance with NFPA 1962 guidelines.
COUPLINGS
Rev. 04-2004

Imperial Hose Product Guide

Uploaded by

Copyright:

Available Formats

Imperial Hose Product Guide

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Imperial Hose Product Guide

Uploaded by

Copyright:

Available Formats

Imperial Hose Product Guide

INDUSTRIAL MUNICIPAL FORESTRY

You might also like