Akira LCD 20chst

LCT TV
Service Manual

-2 -

Model No.: LCT-20CHST
Version: 1.0

M
M
M
o
o
o
d
d
d
e
e
e
l
l
l
:
:
:

L
L
L
C
C
C
T
T
T
-
-
-
2
2
2
0
0
0
C
C
C
H
H
H
S
S
S
T
T
T

C
C
C
h
h
h
a
a
a
s
s
s
s
s
s
i
i
i
s
s
s
:
:
:

L
L
L
S
S
S
-
-
-
0
0
0
7
7
7

-3 -

Version: 1.0

CONTENTS

SPECIFICATION AND FEATURE......................................................................................................... 4

THE FUNCTION INTRODUCTION LS07 CHASSIS LCD TVS MAIN............................................. 9

SIGNAL PROCESSING FLOWCHART............................................................................................... 22

SPARE PART LIST AND EASY DAMAGE PART LIST..................................................................... 34

FACTORY MODE ................................................................................................................................. 36

CIRCUIT DIAGRAM............................................................................................................................ 37

WIRING DIAGRAM............................................................................................................................. 47

EXPLODED VIEW................................................................................................................................ 48

PART LIST............................................................................................................................................. 49

-4 -

Version: 1.0

SPECIFICATION AND FEATURE

1. The Technical Specification of F Series Europe LCD TV:
a. TM150F7E:
Max display format: 1024*768(XGA)
Audio power output: 2*2.0W
Voltage: DC12V
Power adapter voltage: AC 100240W,50/60HZ
Power adapter Model number: FSP048-1AD101C
b. W170F7E:
Max display format: 1280*768(WXGA)
Audio power output: 2*2.0W
AC input voltage of inside power Mold piece: AC 100240V, 50/60HZ
The unit sets: AC power Switch.
c. TM201F7E:
Max display format: 640*480(VGA)
Audio power output :2*2.0W
AC input voltage of inside power mold piece: AC 100240V, 50/60HZ
The unit sets: AC power Switch.

2. Main feature
a. RF input , CATV function
Can receive 470MHZ CATV Programs, can store 100 programs
(Program number display 099);
b. AV Audio and AV Video input
In scart mode, the system can automatically activate scart checking function to identify
signal input modes (CVBS or RGB) and input signal character (16:9 or 4:3); Capable to
receive PAL, NTSC, SECAM color systems; Very convenient to watch VCR (video cassette
recorder), Pickup Camera and other Discs programs.
c. YPbPr input
Can receive high definition YPbPr component video signal from such as DVD Conveniently .
Support format: 480I, 480P, 576I, 576P, 720P (50/60HZ), 1080I (50/60HZ), 1080P
(50/60HZ);
d. VGA input
As the Terminal display Equipments of computer, it can connect with computer conveniently.
It can connect with Computer audio card by its own Audio connection line ,so you can listen
the audio information from computer.

-5 -

Version: 1.0

e. Program lock and child lock function
The function of program lock can lock the programs, input password and modification, the
function of child lock can lock the keys.
f. Timer function
You can set turn on and turn off on time, and power off in 15 min automatically if no signal
input. Automatically enter into save energy mode by itself if no signal in PC condition, it can
be awaken if signal inputs.
g. Blue screen mute noise
In condition of TV, AV, RGB and YPbPr, gentle blue screen will be displayed if no signal
input.
h. Chinese/English menu
Adopt the design of Convenient and Simple graphic menu, you can operate menu more
conveniently and more intuition.
i. Save energy function (power management mode)
When TV is used as PC display terminal, and PC has no output signal . The TV will be power
off in about 30 Seconds automatically, and enter into standby condition. press down
Power/P+/P-/ Number key of Remote control or the PC signal appearance again, the TV will
be on automatically.
j. Plug and play
The TV works as the terminal Equipments of computer, need not equip install softwareit is
real Plug-and-Play.
k. Automatic correct
By its automatic correct function, the LCD TV can bring you the best view.
l. No Flicker, no radiation, green environment protection
The LCD TV can bring you high quality view, and avoid radiation, protect your eyes and look
after your health.
m. Because of its advanced power management mode, the TV can realize standby and recall on
function.
n. ACI function (Auto channel Installation).
o. Stereo and digital accompanying sound processing.
Auto identify and demodulate IGR, and decode NICAM digital accompanying sound.
p. Zoom image function
Support follow zoom function: Full screen mode, 4:3 mode (16:9 TFT), 16:9 (4: 3 TFT),
Movie mode, Sub-title movie mode.
q. Light weight, small dimension, low power consumption

-6 -

Version: 1.0

r. Advanced picture quality Strengthen function
Dynamic skin color Correct: Improve distort color in picture make it Near to real color.
Black level Extension: blacken the more black area of picture. Raise the contrast in Dark
Background.
Color Edge correct: Increase the Steep of color signal edge make the edge of color Transition
more clearly.
Brightness edge correct: increase the steep of Brightness signal edge make the edge of picture
is more clearly.
s. Super fine and inner fairness TFT
t. 10-page teletext storage
u. Dynamic comb filter
v. Headphones output

3. Electric circuit of the TV
The Europe LS07 chassis LCD TV is composed of Steady voltage circuitinverter Circuit, RF
circuit, video Strengthen circuit, video Processing circuit, Power Enlarge circuit, VGA circuit,
system control circuit and key control circuit. The block diagraph of circuit Constitute is below:

-7 -

Version: 1.0

-8 -

Version: 1.0

4. PCB Module introduction
The Constitute of the PCB is easier than LP03 chassis, all the Signal Processing are in Main board.
a. Main board Module
Main board Module is the main part of Signal Processing in LCD TV. The input signal is
converted into uniform digital signal, which can be identified by LCM by system control
circuit. Main board module contain two parts of signal processing Module: Philips UOC3
process analog audio and video circuit mainly, MST518 process VGA circuit, signal Format
transform system control circuit mainly. The front module can convert the video IF signal and
audio IF signal from tuner into RGB analog signal and audio signal, this part is named analog
audio and video decoding process. The RGB color from UOC is received by MST518 and
accomplishes A/D conversion, output suitable digital color signal to drive circuit of TFT. 8051
Processor inside UOC is responsible for co-operation the each part of works in system, and
Respond to user operation, which is operated on Control panel (key-press panel Module).
b. Key board Module
It is composed of 7 function keys the user can operate the LCD TV conveniently by using this
Module.
c. Remote control receiving board Module
It is composed of a work indicator light and a remote receive head. The user use the remote
control box by this module can operate the LCD TV conveniently and know the LCD TV
work condition.
d. Earphone output board module
It is composed of a earphone outlet, user can Listen to by earphone conveniently.
e. Inverter board module (include inverter circuit)
The function of the inverter is supply power to light tube in TFT and lighten the back lamp
Unit of TFT module, so the user can see the image on TFT.

-9 -

Version: 1.0

THE FUNCTION INTRODUCTION LS07 CHASSIS LCD
TVS MAIN IC

1. The main IC of LS07 chassis

Number Name Model Main function
1 A1 TAF5-E2I21RW2 RF tuner
2 U8, U21 TDA1517AWT Audio amplifier
3 U3 MST518 AD converter and format change
4 U2 UOC(TDA15021H) Video decode and MCU control
5 Q9 Si2311DS MOS switch
6 U11, U12 IRF7316 MOS switch
7 U19 NTMS10P02 MOS switch
8 U23 LM2596-5.0 Liner voltage IC
9 U1
24LC21A EEPROM (save display parameter
information)
10 U4 24LC32A EEPROMsave user control information
11 U6, U20 PI5V330A Video switch

2. The function introduction of main IC
a. MST518 high integration chip
MST518 is a high performance, high integration image processor which is designed for LCD,
it can support SXGA format (1280*1024).it integrates a group of AD converter, high quality
format transform system, OSD generator, output clock generator, multiple format output
display interface (support TTL, LVDS, RSDS)
MST518 feature:
Have high quality Expand transform and compress transform, can output XGA format
signal
Integrated LVDS circuit inside
8 bit high quality ADC inside
Double VGA input, Software switch
Support ITU-656 format signal input
Support H/V sync, composite sync, green composite sync input, and detect
automatically by itself
Programmable 10 bit Gamma correct, the brightness and contrast is adjustable
8 color, 256 Character OSD
Built-in DDC circuit inside
Low standby power
Support TTL, double LVDS signal output, Software switch

-10 -

Version: 1.0

MST518 pin function:
And CPU interface
Pin Pin name Pin function
33 HWRESET Hardware resethigh voltage enable
82 CS Chip select signal of three-wire serial bus
83 SDA data signal of three-wire serial bus
84 SCL clock signal of three-wire serial bus
85 INT interrupt
98-91 AD [7:0] Parallel busthe chassis is not used
125 BUSTYPE Bus type select
Analog Interface
38 HSYNC0 Analog Horizontal sync signal input channel 0
39 VSYNC0 Analog vertical sync signal input channel 0
40 HSYNC1 Analog Horizontal sync signal input channel 1
41 VSYNC1 Analog vertical sync signal input channel 1
78 RMID Scaler internal reference voltage
79 REFP internal ADC decouple
80 REFM internal ADC decouple
75 RIN0 Analog red signal input channel 0
74 RIN0M Analog red signal input channel 0 regrounding voltage
73 SOGIN0 Green sync signal input channel 0
72 GIN0 Analog green signal input channel 0
71 GIN0M Analog green signal input channel 0 regrounding
voltage
70 BIN0 Analog blue signal input channel 0
69 BIN0M Analog blue signal input channel 0 regrounding voltage
66 RIN1M Analog red signal input channel 1 regrounding voltage
65 RIN1 Analog red signal input channel 1
64
GIN1M
Analog green signal input channel 1 regrounding
voltage
63 GIN1 Analog green signal input channel 1
62 SOGIN1 Green sync signal input channel 1
61 BIN1M Analog blue signal input channel 1 regrounding voltage
60 BIN1 Analog blue signal input channel 1
55 REXT Outside connect 390 with 3.3V

-11 -

Version: 1.0

LCD Interface
145 OCLK Clock output
146 LDE Enable signal
144 LVSYNC Vertical sync output
143 LHSYNC Horizontal sync output
138 LVA0M LVDS output 0
137 LVA0P LVDS ouput 0+
134 LVA2M LVDS ouput 2
133 LVA2P LVDS output 2+
132 LVACKM LVDS clock signal ouput
131 LVACKP LVDS clock signal ouput +
26-23,18-15 RB[7:0] TTL red signal channel
14-11, 8-5 GB[7:0] TTL green signal channel
4,3,154,153,150-147 BB[7:0] TTL blue signal channel
GPIO Interface
87 GOUT1/PWM1 PWM output 1
86 GOUT0/PWM0 PWM output 0
2 BYPASS Outside connect filter capacitor
29 DDC_DAT Analog interface DDC data
30 DDC_CLK Analog interface DDC clock
31 DDCROM_CLK DDC ROM clock
32 DDCROM_DAT DDC ROM data
34 XIN Crystal oscillator signal input
35 XOUT Crystal oscillator signal output
Power Pins
48, 54, 58, 77 AVDD A/D convert power supply
56 AVDD_PLL PLL power supply
36 AVDD_MPLL MPLL power supply
10, 22, 88, 99, 111,
129, 139, 151
VDDP Digital signal output power supply
19, 102, 114, 142 VDDC Digital circuit power supply
1, 9, 20, 21, 37, 42,
45, 51, 57, 59, 76,
81, 89, 100, 101,
112, 113, 130, 140,
141, 152
GND Digital circuit ground

-12 -

Version: 1.0

MST518 inner diagraph:

b. TDA15021H introduction:
The third-generator super integrated circuit UOC III which designed by Philips company
recently integrates with video decode, 2D comb filter, high quality audio transacting
technique, suitable with the European teletext technique and suitable with US closed caption
and V-chip function compatible with single series IC. The series of UOC III have high
integrity, besides completing the Processing of all small signals (IF signal demodulation,
video decode, H/V signal, sound DSP), and integrate all the MCU function. It has many
Advantages, example: the compact circuit, good performance, simple craft and etc. It
matched with companys high performance price ratio and high product efficiency
demanding. It is suitable for 4:3 or 16:9, 50/60HZ and A100/120HZ TV system, the main
characteristic below:
Multi-system IF demodulationanalog video decode
Comb filter internal
NICAM, stereo auto identify and decode
SCART input channel source auto identify (RGB, CVBS), SCART image input format
identify (4:3, 16: 9)
Support 4:3, 16:9 display format
TOP/FLOF TELETEXT (10 page) receive display
Channel auto install ACI function (can preset)
4 CVBS or 3 Y/C input, 1 CVBS output, 2 YcrCb/2 RGB input
4 AV audio input, 1 AV adjustable audio volume output
Volume auto level control circuit
Global FM demodulation
Picture quality enhancement of dynamic peak value control, skin color correct, Gamma
correct, Black level extension.

-13 -

Version: 1.0

Can turn down horizon and vertical scan part output H/V sync signal to Scaler
128K Flash Memory inside, support program on line
Automatic Y/C signal identify

TDA15021H pin function:

Pin Pin name Pin function
1 VSSP2 Grounding
2 VSSC4 Grounding
3 VDDC4 +1.8V
4 VDDA3 +3.3V
5 VREF_POS_LSL +3.3V
6 VREF_NEG_LSL+HPL 0V
7 VREF_POS_LSR+HPR +3.3V
8 VREF_NEG_HPL+HPR 0V
9 VREF_POS_HPR +3.3V
10 XTALIN Crystal oscillator input
11 XTALOUT Crystal oscillator output
12 VSSA1 Grounding
13 VGUARD/SWIO Protecting voltage input or I/O
14 DECDIG DECDIG signal input
15 VP1 +5V
16 PH2LF The second grade horizontal phase lock filter
17 PH1LF The first grade horizontal phase lock filter
18 GND1 Grounding
19 SECPLL SECAM PLL decouple
20 DECBG Inside reference voltage decouple
21 EWD/AVL VDD5A voltage input
22 VDRB Tv vertical sync signal output
23 VDRA Vertical sync output
24 VIFIN1 VIFinput 1
25 VIFIN2 VIFinput 2
26 VSC Outside connect vertical ramp capacity
27 IREF Recurrent input
28 GNDIF IF grounding
29 SIFIN1 SIF input 1
30 SIFIN2 SIF input 2
31 AGCOUT Tuner RF AGC control voltage output

-14 -

Version: 1.0

32 EHTO Over voltage protection input
33 SSIF MUTE control signal input
34 AUDIOIN5L Av left track signal input
35 AUDIOIN5R Av right track signal input
36 AUDOUTSL SCART/CINCH left track output
37 AUDOUTSR SCART/CINCH right track output
38 DECSDEM Track demodulator decouple
39 QSSO De emphasis capacitor
40 GND2 Grounding
41 PLLIF IF_PLL filter
42 SIFAGC Sound intermediate frequency auto gain control
43 IFVO IF demodulation video output
44 FMRO Fm broadcast output
45 VCC8V The supply voltage of Sound switch
46 AGC2SIF The second sound intermediate frequency auto gain
control
47 VP2 +5V
48 IFVO The video output of Choose channel
49 AUDIOIN4L HD signal left track audio output
50 AUDIOIN4R HD signal right track audio output
51 CVBS4/Y4 S-video luminance signal input
52 C4 S-video chroma signal input
53 AUDIOIN2L PC signal left track audio input
54 AUDIOIN2R PC signal right track audio input
55 CVBS2/Y2 AV CVBS signal input
56 AUDIOIN3L Inside DVD module left track audio input
57 AUDIOIN3R Inside DVD module right track audio input
58 CVBS3/Y3 Inside DVD module brightness signal input
59 C2/C3 Inside DVD module chroma signal input
60 AUDOUTLSL Main channel left track output
61 AUDOUTLSR Main channel right track output
62 AUDOUTHPL Earphone channel left track output
63 AUDOUTHPR Earphone channel right track output
64 CVBS/PIP CVBS/PIP output
65 SVM Scan modulate output
66 FBISO Flyback input/sandcastle output or composite H/V
timing output
67 HOUT Horizontal sync signal output

-15 -

Version: 1.0

68 VSScomb Grounding
69 VDDcomb +5V
70 VIN V signal input
71 UIN U signal input
72 YIN Y signal input
73 YSYNC Y signal input for Sync separate
74 YOUT Y signal output
75 UOUT U signal output
76 VOUT V signal output
77 INSSW3 RGB/YpbPr insert identify signal input
78 R/PrIN3 R/Pr signal input
79 G/YIN3 G/Y signal input
80 B/PbIN3 B/Pb signal input
81 GND3 Grounding
82 VP3 +5V
83 BCLIN Beam current limiter input
84 BLKIN Black current input
85 RO R basic color signal input
86 GO G basic color signal output
87 BO B basic color signal output
88 VDD3 +3.3V
89 VREFAD_NEG 0V
90 VREFAD_POS +3.3V
91 VREFAD Audio ADC re.voltage
92 GNDA Grounding
93 VDDA +1.8V
94 VDD3A +3.3V
95 VSSADC Grounding
96 VADC +1.8V
97 INT0 Remote control signal input
98 P10/INT1 DPF clock line
99 P11/T0 DPFdata line
100 VDDC2 +1.8V
101 VSSC2 Grounding
102 P04/12SWS MST reset signal
103 P03/12SCLK HD Pc select control signal
104 P02/12SDO2 Power Amplifier standby control signal
105 P01/12SDO1 TV_DPF select control signal

-16 -

Version: 1.0

106 P00/12SDII/O Turn on control signal
107 P13/T1 MST chip select signal
108 P16/SCL UOCI2C bus clock line
109 P17/SDA UOCI2C bus data line
110 VDDP +3.3V
111 P20/TPWM Red indicator light control signal
112 P21/PWM0 Green indicator light control signal
113 P22/PWM1 TFT power supply control signal
114 P23/PWM2 Inside DVD module power supply control signal
115 P30/ADC0 Reserve IO port
116 P31/ADC1 Earphone insert identify signal input
117 VDDC1 +1.8V
118 VDD18 +1.8V
119 P32/ADC2 DVD key-press signal input
120 P33/ADC3 TV key-press signal input
121 VSSC Grounding
122 P24/PWM3 Background control signal output
123 P25/PWM4 SAW filter control signal
124 VDDC3 +1.8V
125 VSSC3 Grounding
126 P12/INT2 MST interrupt signal input
127 P14/RX MST data line
128 P15/TX MST clock line

-17 -

Version: 1.0

TDA15021H inside block diagram

-18 -

Version: 1.0

c. TDA9178 introduction
TDA9178 is a analog signal processor with standard YUV input and output interface .It provid
three main process function: luminance vector, color vector and spectrum process. It can finish
comprehensive picture improving function independently. The characteristics of the TDA9178 are
below:
Luminance Transient Improvement (LTI), Colour Transient Improvement (CTI)
Variable gamma control
Self-suitable black level extend control
Skin color correction, green intensity ,blue extend
Noise measurement and reduced noise process founction
Line Width Control (LWC)

TDA9178 PIN DESCRIPTION:
Pin Pin name Function
1 Sand castle input Sand castle input
2 Not connected Grounding
3 ADC input 1 A/D convertor input 1
6 Luminance input Y input
7 Address selection input I2C address choose input port
8 U signal input U input
9 V signal input V input
10 Test pin Grounding
11 Serial clock input (I2C-bus) I2C bus clock signal
12 Not connected Not connected
13 Not connected Not connected
14 Serial data input/output (I2C-bus) I2C bus data signal
15 Decoupling digital supply Connect decouple capacitor external
16 V signal output V signal output
17 U signal output U signal output
18 Ground Ground
19 Luminance output Y signal input
20 Supply voltage Supply power
21 SCAVEM output Scan velocity modulate output

-19 -

Version: 1.0

TDA9178 inside block diagram:

-20 -

Version: 1.0

d. TDA1517AWT brief:
The TDA1517ATW is a double channel class-AB power amplifier contained in a plastic heat
sink thin shrink small outline package (HTSSOP20). The device is primarily developed for
multimedia applications.
Outside circuit is simple
Mute, standby is controllable
Temperature protect circuit
Low noise switch
Constant gain

TDA1517 PIN DESCRIPTION:

Pin Pin name function
3 Non-inverting input Audio input
5 Supply voltage ripple rejection Bias circuit filter
8, 9 Output Audio output
12, 13 N.C. Not connected
15, 16 Supply voltage 12V power supply
17 Mode select switch Work mode select
18 Inverting input Reverse input terminal connect capacitor to
ground
1, 2, 4, 6, 7, 10,
11, 14, 19, 20
GND Ground

-21 -

Version: 1.0

TDA1517 inside block diagram:

-22 -

Version: 1.0

SIGNAL PROCESSING FLOWCHART

This chapter mainly introduces analog signals process, video intensify process, TV system control
process, TV supply system of the Europe LCD TV.

1. Analog signals process
a. IF/RF process
Completed by TAF5-E2I21RW2 RF tuner, output IF signal.

The Function of RF tuner is below:
Pin Symbol Function
1 AGC Auto gain control voltage
2 TU The TV do not connect
3 ADD Ground
4 SCL I
2
C busclock
5 SDA I
2
C busdata
6 BM +5V power supply
7 BM +5V power supply
8 NC Not connected
9 BTL +32V power supplyform 032V tune voltage
10 NC Not connected
11 IF IF signal output

2. Image and sound process
UOC chip receives the IF signal separated from SAW, detect and decode. Output RGB color
analog signals from the 85, 86, 87 pin respectively. Output the main channel L, R audio signal
from 60, 61 pin. Output earphone channel L, R audio signal from 62, 63 pin. Additional, Part
number U7, TDA9178 complete the enhancement of quality of the picture, by the output 74, 75,
76 pin Of UOC and the input 70, 71, 72 pin, combined with UOC to form a loop circuit.
Further, AV, S-Video, YC signal of inside DVD (some types of TV have not) is also decoded
inside of UOC chip, switch internal UOC with TV input and output a RGB color analog signal,
send it to back-end process.

-23 -

Version: 1.0

3. Digital signal process
The analog RGB signal output from UOC and RGB signal output from DFP are switched and
selected by a PI5V330A, input it into the 65, 63, 60 pin Of MST518. The RGB signal output from
computer and HD-YpbPr signal are switched and selected by another PI5V330A, input into the 75,
72, 70? of MST518. This two channel RGB signal are switched inside MST518, then AD
converter, video format transition, at last output digital color signal, which is suitable for TFT
drive circuit. MST518 process the pixels ratio converting of input video signal, the image auto
optimization process, then process memory buffer, scaler, chroma matrix circuit, chroma look-up
table, chroma space gain, etc. Output corresponding standard physical resolution digital color
signal and corresponding sync, clock signal to TFT, control the TFT to display image correctly.

4. TV power supply system:
a. The supply power system of the main IC is below:
12V:the unit main power supply
+34V:RF tuner tune voltage
VCC5: stable and constant +5V power supply
VCC5A: +5V power supply software can turn off
V3_3D:UOC digital part supply power supply
V1_8V1:UOC digital part constant supply power supply
V1_8V2:UOC digital part power supply can be turned off
V2_5M:MST518 digital core supply power supply
V3_3M:MST518 supply power supply

-24 -

Version: 1.0

b. The constitute and distributing of the TV

LM2596-
5.0
7805
Double
voltage
IRF7316
NCP1117
LM1084_3
. 3V
LM1117_2
. 5V
U13
U11
VCC5
U18
U8
L3
C188
VCC5
+32V
VCC5A
TO INVERTER
TO TDA9178
V3_3M
V2.5M
V3_3D
12V
VCC5_SW
U14
U15
PWRON
PWRON
7808
12Va
NPC1117D
U22
V1_8V1
U17
Fi l t er
Fi l t er
Fi l t er
Filter
VPO
VAD
VPLL
VDPLL
Filter
VDD
NTMS10
P02R
V1_8V2
Q9
NTMS10
P02R
VLCD
U19
FB39
FB40
FB41
V3_3M
VCC5
12V
LM2596-
5.0
U23
L6
C294
TO DPF OR DVD
12V

-25 -

Version: 1.0

5. The main element in main board and location of socket and definition

A
1
3
2

4
5

6
7

8
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25

K
E
L
-26 -

Version: 1.0

Socket definition

Number Name Connect object Function description
1 JP1 Connect socket +12V, +12V, GNG, GND(use when inside
power supply plank JP2 not use )
2 JP2 Connect adapter +12V, GND, GNDuse when outside
connect adapterJP1not use
3 J8 Connect outside VGA audio input
4 J1 Connect outside VGA input
5 J3 Connect outside HD-YpbPr input
6 J4 Connect outside HD audio input
7 J2 Connect outside SCART signal
input

8 J20 Connect outside AV input
9 J9 Connect inside DVD signal input
10 J21 Connect inside DVD signal input
11 J7 Connect inside DVD K panel Look circuit diagramthe second pin is
3.3V
12 J12 Connect earphone output panel
13 J14 Connect speaker
14 J13 Connect speaker
15 J6 Connect TV K panel Look circuit diagram, the second pin is
3.3V
16 J5 Connect remote control Look circuit diagram, the fifth pin is 3.3V
17 J11 UOC debug socket
18 J10 DPF digital photo-frame signal input
19 J17 Connect display screenTTL
screen
AU 20, 15
20 J16 Connect display screenLVDS
screen
SAMSUNG 15, 17
21 J22 Connect display screenTTL
screen
LG 20, 17
22 J15 MST518 debug socket
23 J19 Supply DVD or DPF power Look circuit diagram, the first, second,
third pin are 3.3V
24 J18 Connect inverter +12V, +12V, poor light switch, GND,
DND, GND

-27 -

Version: 1.0

Explain of Main element
No. Name Element Function description
A A1 RF tuner TAF5-E2I21RW2 RF input, IF output
B U2 UOC(TDA15021H) Video decode and MCU control
C U3 MST518 AD converter and format transition
D U20 PI5V330A Video switch on/off
E U6 PI5V330A Video switch on/off
F U11 IRF7316 MOS switch
G U9 LM2596-5.0 Linear voltage IC
H U23 LM2596-5.0 Linear voltage IC
I U19 NTMS10P02 MOS switch
J U21 TDA1517AWT Audio power amplifier
K U8 TDA1517AWT Audio power amplifier
L U4 24LC32A EEPROM(store user control information)
M Q9 Si2311DS MOS switch
N U12 IRF7316 MOS switch
O U1 24LC21A EEPROM(store display parameter information)

-28 -

Version: 1.0

TYPICAL TROUBLESHOOTING FLOWCHART

1. Typical troubleshooting flowchart
a. Not anything (havent sound , havent picture, havent indicator light), and not respond key-press, remote control.

No answer,no key
press,no remote control
Is outside adapter(or inside)
output 12V normal?
Mend or change
adapter
NO
The connection of
Main board and key
press ,remote plane is
reliable or not?
YES
Reset the connect
lines
Is U13U22 output
port voltage normal?
NO
YES
Check U13U22
Outside circuit
NO YES
Check each supply power pins
voltage of U13U22 output to
U2 are reliable or not?
Change U2
1check outside parts of an
apparatus of supply power pin .
2check the jointing is OK or
not.
YES One pin has no voltage

-29 -

Version: 1.0

b. Have sound no picture, indicator light work normally

indicator light work,but black screen
when pressing down the power supply
key
Observe back lamp is on or off
NO YES
U13U22 output voltage
is normal or not?
Check U13U22
Outside circuit
NO
YES
Check each supply power pin voltage
which output from U13U22 to U2 is
normal or not?
Change U2
1check supply power pin outside
parts of an apparatus
2check the jointing is OK or not
YES One pin no voltage
Cheeck inverter supply
power voltage and
connect line

-30 -

Version: 1.0

c. White screen: The reason of the troubleshoot is the signal electrode electrode havent working voltage. The TFT is always in transparent condition, so the
whole screen is in white raster.
VLCD of screen socketJ16(J17J22) in
main board is normal or not?
NO
YES
Check Q25U19FB39
FB40FB41, ect parts of an
apparatus
Check the jointing of screen socket in main
board is OK or not?
NO YES
Patch jointing
Switch signal source,use the
oscillograph to check the signal input
or not
Check PCB copper aluminium
connect line
Check U2 outside circuit is normal or
not ,change the fault ones.
YES NO

-31 -

Version: 1.0

d. Picture abnormal, color abnormal, short of color
Observe the picture is different in one
condition by the mode of switch signal
source
Check U20 and i t s
out si de ci r cui t , check
t he Q12Q14Q15 i s
nor mal or not
Check U6 and i t s
out si de ci r cui t i s
nor mal or not
Check the jointing of screen
socket J16J17J22 in
main board is OK or not,the
connection is OK or not
TVAV condition picture
different
HDVGAcondition picture
different
all appear picture different
normal
Check the output of 85th
86th87th pin of U2
Check FB1FB2FB3
FB4FB5 inductance are
normal or not
Check U2 outside
circuit is normal or
not,change fault ones
normal normal

-32 -

Version: 1.0

2. The example of service
Example 1: Cant turn on the TV
Troubleshoot phenomenon: After connect power supply and turn on the power supply , the
AKIRA logo will not appear on screen. Press the key or use the remote control, the TV has no
reflect, no display and black screen.
The process of maintenance: remove the plug of adapter output, measure adapter output voltage is
+12V,the adapter works normally. Check the connection with key-press panelremote control
panel and mainboard. If it is ok, the problem must be MCU not work. First check supply power of
U2 chip. Connect power supply, then measure the voltage of the 2, 4 pin of U13NTMS10P02 is
0.2V, and over-heat, the reason must be short circuit of power supply backend. You should remove
the plug quickly. Otherwise the chip must be bad. Use the multimeter to measure, confirm it is
short circuit to ground. The places, which connect U2 with 3.3V voltage are so many, you should
disconnect and measure it one by one. When you disconnect the C68, if it is normal, C68
grounding Short circuit.

Example 2: No picture in VGA mode
Troubleshooting phenomenon: in TV/AV mode, the image and sound is ok, PC (in VGA mode) is
no picture, but have state icon.
The process of maintenance: first check the signal source, signal socket, plug are ok or not.
Because during switch the mode, the image display normally in non-PC mode, it is proved that the
backend image public processing channel is ok, namely U3MST518 and backend image signal
processing circuit work normally. In PC mode, measure the arbitrary pin of 4, 7, 12 pin, image
date terminal of U6P15V330A by oscillograph there are no waveform, change U6P15V330A and
the Troubleshooting phenomenon disappear.

Example 3: No picture in VGA mode and the signal beyond boundary is appeared on screen.
Troubleshooting phenomenon: no picture in VGA mode and the signal beyond bound is
appeared on screen in TV/AV mode, image, sound is ok.
The process of maintenance: first check the signal output from the signal source is not standard or
beyond the resolution, which is supported by TFT except of the two cases, the phenomenon
comes from the TFT display. Under general circumstance it is caused by the abnormal of the
horizon sync impulse, vertical sync impulse of VGA signal. Inspect the 38
th
, 39th pin of U3 by
oscillograph. Find the magnitude of horizon sync impulse is below the normal, measure the
waveform of 13
th
pin of VGA J1. If it is ok, so maybe resistance of the R23 will be large, measure
the resistance of R23 is 10K , but the rating resistance is 1K , so it is obvious that the
magnitude of horizon sync impulse is attenuated too large caused by value of couple resistance
R23 become large. So the pixel clock inside of the MST518 can not vibrate, result in the A/D
converter of MST518 internal can not work normally. So appear no picture in VGA mode and
signal beyond boundary on TFT screen.

-33 -

Version: 1.0

Example 4: Can control TV by remote control, but can not control TV by key-press panel
Troubleshooting phenomenon: imagesound is ok under any source, use remote control to operate each
function is ok, but can not control by using the key-press panel, failure completely.
The process of maintenance: first check the socket of J6 on mainboard, the solder and touch of
connector are ok or not. if it is ok, check the key-press panel ,measure each resistance, find R1 open
circuit, change it .

Example 5: The image is ok after turn on the TV, but left speaker has no sound output
Troubleshooting phenomenon: the image is normal in TV mode, but the left speaker has no sound
output, using remote control to operate, each function is ok. Use AV, PC audio input, is still no sound
output.
The process of maintenance: measure the waveform from 60
th
pin of UOC by oscillograph, according
to signal flow chat, measure R227R157U8C130 one by one, and observe the waveform is ok or not,
find the back end of C130 have not waveform, change C130 and troubleshooting disappear.

-34 -

Version: 1.0

SPARE PART LISTS AND EASY DAMAGE PART LIST

Spare part lists:
TM150F7E:
Material name Type (module NO.) Material code Remark
Main board groupware JUJ6.690.033-2 8669000332J
Remote control panel groupware JUJ6.694.016 8669400160J
Key-press panel groupware JUJ6.694.017 8669400170J
Earphone panel
groupware JUJ6.695.002 8669500020J
TFT LTM150XH-L06 68219601565
INVERTER panel groupware INV15-474 59324104740
Samsung
screen use
Dynamoelectric speaker Y2898-01-5W-4 56231105042
Remote control KLC5A(JUL2.018.351) 8201803510L
Power supply adapter FSP084-1CD02C 67128084025

W170F7E:
Material name Type (module No.) Material code Remark
Remote panel groupware JUJ6.694.016 8669400160J
Earphone panel
groupware JUJ6.695.002 8669500020J
TFT LTM170W1-L01 68219601701
TFT LC171W03 68211710305
Samsung
screen use
LG screen
use
Remote control KLC5A(JUL2.018.351) 8201803510L
Inner power supply module FSP084-1CD02C 67128084025

-35 -

Version: 1.0

TM201F7E:
Material name Type (module No.) Material code Remark
Main board groupware JUJ6.690.033 8669000330J
Remote panel groupware JUJ6.694.016 8669400160J
Earphone panel groupware JUJ6.695.002 8669500020J
Samsung
screen use
TFT A201SN01 68219020110 LG screen use
TFT LC201V02 68212010235
INVERTER panel groupware INV18-605D 59324106054
INVERTER panel groupware INV20-606A(D) 59324126061
Samsung
screen use
Remote control KLC5A(JUL2.018.351) 8201803510L LG screen use
Inner power supply module FSP084-1CD02C 67128084025
Samsung
screen use

-36 -

Version: 1.0

FACTORY MODE

The method of Entering into factory mode:
Turn down the volume to 0, press down the key of mute in remote control, then press the key of
menu in remote control. press CH+ and CH- choose the items which need to adjust.
The method of exiting from factory mode:
Press the in remote control, after exiting from the factory mode, you should turn on the TV
again.

Now the introduction of the modes which are often used is below, the others are design parameter
mode, not permit to modify.

M6 The fast key is the key of language
IFPL Adjust the scale of picture and sound the IF signal
M6 The fast key is the key of language
TOP Tune AGC voltage
M13 The fast key is the key of DVD
DVD The switch of DVD source
DPF The switch of DPF source
M17
LOGO LOGO display or not
BLUEBACK Blue screen switch
M24
AUTO Auto revise
M25 The fast key is the key of title
INIT Initialization program
M28 The fast key is the key of 0
IIC BUS OPEN Open bus

1 2 3 4 5 6
A
B
C
D
6 5 4 3 2 1
D
C
B
A
Title
1208.DDB
LS07-EU-LCDTV
HD_AUD_LIN
SC_AUD_ROUT
SC_AUD_LOUT
SCART_B_IN
SCART_G_IN
SCART_R_IN
SC_AUD_RIN
SC_AUD_LIN
STAT_AV
FBLIN
SC_CVBSIN
SC_CVBSOUT
HD_AUD_RIN
PC_AUD_LIN
PC_AUD_RIN
PR_IN
PB_IN
HD_Y_IN
TV_IR
LED_RED
LED_GREEN
HD_Y_IN
PB_IN
PR_IN
G_RIN
G_GIN
G_BIN
HD_PC_SW
SOGIN1
PC_RIN
PC_GIN
PC_BIN
PC_HS
PC_VS
PC_HSIN
PC_VSIN
HD_PC_SW
DVD_C2IN
DVD_Y2IN
DVD_AUD_LIN
DVD_AUD_RIN
PC_RIN
PC_GIN
PC_BIN
PC_VS
PC_HS
UPDATE_CON
VGA_SDA
VGA_SCL
DDC_SDA
DDC_SCL
TV_KEY_DEC
DVD_KEY_DEC
SDA_UOC
SCL_UOC
02_SCART_PC_HD
02_SCART_PC_HD
IF_OUT
+34V
SCL_UOC
SDA_UOC
AGC
03_TUNER
03_TUNER
AV_CVBSIN
Y_OUT
U_OUT
V_OUT
TV_R
TV_G
TV_B
TV_HSYNC
SANDC
AGC
M_LOUT
M_ROUT
HP_LOUT
HP_ROUT
TV_IR
LED_GREEN
LED_RED
TV_KEY_DEC
IF_OUT
SDA_UOC
SCL_UOC
PC_AUD_LIN
V_IN
U_IN
Y_IN
HD_PC_SW
CSZ_MST
SDA_MST
SCL_MST
RST_MST
ASTB
SCL_DPF
AV_AUD_LIN
AV_AUD_RIN
HD_AUD_LIN
HD_AUD_RIN
SDA_DPF
PC_AUD_RIN
SCL_UOC
SDA_UOC
ON_PANEL
ON_BACKLITE
DVD_KEY_DEC
HP_IDENT
INT_MST
TV_DPF_SW
PWRON
DVD_C2IN
DVD_Y2IN
DVD_AUD_LIN
DVD_AUD_RIN
EN_DPF_DVD
MUTE
TV_VSYNC
SVIDEO_Y1IN
SVIDEO_C1IN
04_UOCIII TDA15021H
04_UOCIII TDA15021H
SANDC
V_IN
V_OUT
Y_IN
U_OUT
U_IN
Y_OUT
SDA_UOC
SCL_UOC
TV_HSYNC
TV_DPF_VSIN
TV_DPF_HSIN
TV_B
TV_R
TV_G
DPF_RIN
DPF_GIN
DPF_BIN
TV_DPF_RIN
TV_DPF_GIN
TV_DPF_BIN
TV_DPF_SW
TV_DPF_SW
DPF_RIN
DPF_GIN
DPF_BIN
TV_VSYNC
05_TV_DPF_MUX
05_TV_DPF_MUX
TV_DPF_HSIN
TV_DPF_VSIN
PC_HSIN
PC_VSIN
TV_DPF_BINM
TV_DPF_BIN
TV_DPF_GINM
TV_DPF_GIN
TV_DPF_RINM
TV_DPF_RIN
SOGIN1
G_RIN
G_GIN
G_BIN
G_RM
G_GM
G_BM
SDA_MST
SCL_MST
CSZ_MST
RST_MST
INT_MST
RB[0..7]
GB[0..7]
BB[0..7]
PCLK
PDEN
PHSYNC
PVSYNC
RX0+
RX0-
RXCLK-
RXCLK+
RX1-
RX1+
RX2-
RX2+
RX3-
RX3+
TV_DPF_RINM
TV_DPF_GINM
TV_DPF_BINM
G_RM
G_GM
G_BM
SDA_MST
SCL_MST
CSZ_MST
RST_MST
06_MST518
06_MST518
BB[0..7]
PCLK
PHSYNC
RB[0..7]
PVSYNC
GB[0..7]
PDEN
RX0+
RX0-
RXCLK-
RXCLK+
RX1-
RX1+
RX2-
RX2+
RX3-
RX3+
07_Panel
07_Panel
HP_ROUT
HP_LOUT
HP_IDENT
M_LOUT
M_ROUT
ASTB
MUTE
08_Sound Amplifier
08_Sound Amplifier
+34V
PWRON
ON_PANEL
VLCD
ON_BACKLITE
EN_DPF_DVD
SDA_DPF
SCL_DPF
09_Power Supply
09_Power Supply
UPDATE_CON
VGA_SCL
VGA_SDA
DDC_SDA
DDC_SCL
SCL_UOC
SDA_UOC
10_VGA_UPDATE
10_VGA_UPDATE
-37 -

Version: 1.0

CIRCUIT DIAGRAM

Title
_EU_for_
R32
10K
HD_AUD_LIN
R31
75
R92
75
R79
75
R13 100
R12 100
R11 100
R10 330
R9 330 R65 10K
R78
47K
R75 10K
R39 10K
R40
47K
R62 100
R64
100
C6
1
0
0
p
F
C136
1
0
0
p
F
C10
100pF
C11
100pF
C7
1
0
0
p
F
C9
100pF
C8
100pF
C17
100pF
C18
100pF
C138
100pF
SC_AUD_ROUT
SC_AUD_LOUT
SCART_B_IN
SCART_G_IN
SCART_R_IN
R36
75
R37
75
R38
3.3K
SC_AUD_RIN
SC_AUD_LIN
STAT_AV
FBLIN
SC_CVBSIN
Q8
2SA1162
SC_CVBSOUT
R7
220
VCC5A
C71
47uF16V
R8
75
LS07-EU-CONNECTORS
R34
47K
R33
10K
HD_AUD_RIN
R35
47K
R51 10K
PC_AUD_LIN
R53
47K
R52 10K
PC_AUD_RIN
R54
47K
R180
22K
PR_IN
PR
R179
22K
PB_IN
PB
Y
HD_Y_IN
R178
22K
J8
GCC02-0085
TV_IR
LED_RED
LED_GREEN
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
9
9
10
10
11
11
12
12
13
13
14
14
15
15
16
16
17
17
18
18
19
19
20
20
21
21
22
22
J2
SCART
C15
100pF
C16
100pF
C22
100pF
C23
100pF R217
75
R218
75
R219
75
Q18
2N3904
Q13
2N3904
R222
4.7K
R224
6.8K
R221
4.7K
R223
6.8K
12Va
R225
1K
R226
1K
R220
100
C198
10uF16V
C137 10uF16V
C199
100uF16V
C233
0.1uF
3
6
J3C
AV-1-3
2
5
J3B
AV-1-3
1
4
J3A
AV-1-3
1
4
J4A
AV-1-2K
2
5
3
J4B
AV-1-2K
S2A
3
S2B
6
S2C
13
S1A
2
S1B
5
S1C
14
/EN
15
DD
9
S2D
10
S1D
11
DA
4
DB
7
IN
1
DC
12
GND
8
VCC
16
U6
PI5V330A
HD_Y_IN
PB_IN
PR_IN
C120
0.1uF
C121
10uF16V
FB38
ECB2012M800T VCC5A
G_RIN
G_GIN
G_BIN
HD_PC_SW
R152
100 R153
100
R154 100
C124 47nF
C122
47nF C123
47nF
R155 390 C133 1nF
SOGIN1
PC_RIN
PC_GIN
PC_BIN
C125
0.1uF
3 2
1
1
4
7
U16A
74LVC126A
6 5
4
U16B
74LVC126A
PC_HS
PC_VS
PC_HSIN
PC_VSIN
HD_PC_SW
V3_3M
11 12
13 U16D
74LVC126A
8 9
10 U16C
74LVC126A
1
2
3
4
5
J5
CON5
V3_3D
1: Select PC
0: Select YPbPr
1
2
3
4
5
6
7
8
9
10
11
12
J9
CON12
C184
270pF
FB25 ECI2012M2R2KT
C185
270pF
C182
330pF
FB21 ECI2012M2R2KT
R50
75
C183
330pF
R55
75
DVD_C2IN
DVD_Y2IN
R25 10K
DVD_AUD_LIN
R44
47K
R27 10K
DVD_AUD_RIN
R46
47K
C135
100pF
C146
100pF
DVDSignal Input
R26
10K
R48
10K
R56
10K
FB52
ECBP2012M700T
FB51
ECBP2012M700T
FB53
ECBP2012M700T
VCC5A
VCC5A
VCC5A
C24
10uF16V
C21
10uF16V
C14
10uF16V
PC_RIN
PC_GIN
PC_BIN
VGI N
VGA_V
PC_VS
VRI N
VBI N
PC_HS
C3
12pF
C1
12pF
C2
12pF
FB2
ECBP2012M700T
FB1
ECBP2012M700T
R1
75
R3
75
R2
75
FB3
ECBP2012M700T
1
3
2
D3
BAV99
1
3
2
D2
BAV99
1
3
2
D5
BAV99
1
3
2
D1
BAV99
1
3
2
D4
BAV99
VCC5
VCC5
PC_VS
PC_HS
FB5
ECBP2012M801T C12 220pF
C13 33pF
R22 1K
FB4
ECBP2012M801T
R23 1K
R24 2.2K
R21 10K
C12,C13 option (open for better phase)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
1
6
1
7
J1
1-788624-2/AMP
UPDATE_CON
VGA_SDA
VGA_SCL
VGA_V
VGA_PWR
R42
10K
1
3
2
D8
BAV99
1
3
2
D7
BAV99
NC1
1
NC2
2
NC3
3
GND
4
SDA
5
SCL
6
VCLK
7
VCC
8
U1
24LC21A
C20
0.1uF
3
2 1
D6 BAV70
R45
15K
R43
15K
VCC5
R41 Option
DDC_SDA
DDC_SCL
TV_KEY_DEC
V3_3D
1
2
3
J6
CON3
1
2
3
J7
CON3
DVD_KEY_DEC
V3_3D
R29 47K
R20 47K
SDA_UOC
SCL_UOC 1
2
3
4
J11
CON4
VCC5
Use for WISPand WIC32
R16
10
-38 -

Version: 1.0

1 2 3 4
A
B
C
D
6 5 4 3 2 1
D
C
B
A
PHILIPS
A
G
C
1
T
U
2
A
D
D
3
S
C
L
4
S
D
A
5
+
5
V
6
+
5
V
7
N
C
8
B
T
L
9
N
C
1
0
I
F
-
O
U
T
1
1
PAD
12
PAD
13
PAD
14
PAD
15
A1 TAF5-E2I21RW2
C239
22uF16V
C147
0.1uF
R113 10K
R111
68K
C240
47uF16V
C241
47uF16V
C148
0.1uF
R60 47
R61 47
R112 10K
VCC5A
IF_OUT
AGC
SDA_UOC
SCL_UOC
+34V
LS07-EU-TUNER
C244
4.7uF/50V
C242
0.1uF
L5
ECI2012K220T
D11
uPC574
R47
100
R105
4.7K
R41
3.3K
R110
100
C204
10nF
IFGND
VCC5A
C221
10nF
C224
22nF
IFGND
SCL_UOC
SDA_UOC
AGC
R109
0
R49
10
C227
100uF16V
C209
10nF
L2
E
C
I
2
0
1
2
K
R
5
6
K
B
FB32
ECI2012K220T
D10
IN4148
FB35 ECB2012M800T
Q1
2SC388
5
-39 -

Version: 1.0

3 1 2
A
B
C
D
4 3 2 1
D
C
B
A
Title
U_for_M
Y_OUT
Y_OUT
VDD5A_1
VDD5A_2
VDD5A_2
DECDIG
VDD5A_1
DECDIG
UOC_VIFIN1
UOC_VIFIN2
UOC_SIF1
UOC_SIF2
UOC_VIFIN1
UOC_VIFIN2
UOC_SIF1
UOC_SIF2
SAW_SW
R93 100K
R91 12K
C88
6.8nF
C86
1uF/50V
R94 1K
C56 2.2uF
C75
0.1uF
C91 4.7uF
C67
0.1uF
C92 3.3nF
C29 0.1uF
C90
0.1uF
C87
47uF16V
C26 0.1uF
C30 0.1uF
C31 0.1uF R63 0
C32 0.1uF
C62 1uF/50V
C63 1uF/50V
C68
0.1uF
C72
10uF16V
C76
220nF
C80
220nF
C85
100uF16V
C83
0.1uF
R74 4.7K
FB12
R104 10K
R103 10K
R126 10K
R81 100
R80 100
FB17
C54
0.1uF
FB13
FB14
R68 100
R69 100
R76 39K
R119 2.2K
C77
0.1uF
C73
10uF16V
C69
0.1uF
D9
BA792
C33 4.7uF/50V
C34 1nF
R71 27K
R70 100
C107
220nF
R129
10K
FB18
C81
0.1uF
C49
680nF
C48
680nF
C47
680nF
R72 680
C37
0.1uF
C43
0.1uF
C40
47uF16V
FB9
C35 10nF
FB19
C52
100uF16V
R77 390
C89 330nF
C64 0.1uF
C38
0.1uF
C44
0.1uF
C41
10uF16V
R82 100
FB15
R98 47
C74
10uF16V
C78
0.1uF
C70
0.1uF
R99 47
R95 100
C45
220nF
FB16
C51
100uF16V
C46
0.1uF
C96
100uF16V
C97
0.1uF
C94
0.1uF
FB20
SAW
1
2
3
4
5
T1
SAW
1
2
3
4
5
T2
R73 47K
C58 220nF
R120
1K
C59 2.2uF
C99
33pF
C101
33pF
C82
0.1uF
C79
220nF
R67 100
C53
10uF16V
FB8
C60 2.2uF
R66 2.7K
R118
2.2K
C39
47uF16V
C42
0.1uF
C36
0.1uF
C103
10nF
FB10
VCC5A
V3_3D
V1_8V1
V3_3D
V1_8V1
V3_3D
VCC5A
V1_8V2
V1_8V2
V1_8V1
V3_3D
VCC5
VCC5A V1_8V2
IFGND
IFGND
IFGND
IFGND
SC_CVBSIN
Y_OUT
U_OUT
V_OUT
TV_R
TV_G
TV_B
TV_HSYNC
SANDC
AGC
M_LOUT
M_ROUT
HP_LOUT
HP_ROUT
TV_IR
LED_GREEN
LED_RED
TV_KEY_DEC
IF_OUT
SDA_UOC
SCL_UOC
LS07-EU-UOCIII TAD12021H
PC_AUD_LIN
V_IN
U_IN
Y_IN
HD_PC_SW
R97
100 R100
100
CSZ_MST
SDA_MST
SCL_MST
RST_MST
ASTB
SCL_DPF
Y1
24.576M
C55 2.2uF
HD_AUD_LIN
HD_AUD_RIN
SDA_DPF
PC_AUD_RIN
R
8
5
3
.3
K
R
8
7
3
.3
K
R
8
8
3
.3
K
R
8
9
3
.3
K
R
9
0
3
.3
K
V3_3D
R
1
0
7
3
.3
K
R
1
0
2
3
.3
K
A0
1
A1
2
A2
3
GND
4
SDA
5
SCL
6
WP
7
VCC
8
U4
24LC32A
C95
0.1uF
SCL_UOC
SDA_UOC
R
8
4
3
.3
K
ON_PANEL
ON_BACKLITE
DVD_KEY_DEC
C61 2.2uF
C57 2.2uF
SAW_SW
HP_IDENT R101 100
R
1
8
3
3
.3
K
INT_MST
R
8
3
3
.3
K
TV_DPF_SW
R
8
6
3
.3
K
VDD5A_1
15
VDD5A_2
47
VDD5A_3
82
GNDA1
18
GNDA2
40
GNDA3
81
VDDC
3
VSSC
2
VDDC
124
VSSC
125
VDDC
100
VSSC
101
VDDC
117
VSSC
121
VDD3A
4
VDD3
88
VDD3A
94
GNDA
12
VCOMB
69
VSSCOMB
68
VREF
90
VSS_REF
89
GNDA
1
VADC
96
VSSADC
95
VDD18
118
VDDA
93
VDDP
110
GNDAUD
92
XIN
10
XOUT
11
VREF_SDAC1
5
GREF_SDAC1
6
VREF_SDAC2
7
GREF_SDAC2
8
VREF_SDAC3
9
DECDIG
14
V8SWTCH
45
U2A
TDA15021H_1
FBLIN
77
R3/Pr
78
G3/Y
79
B3/Pb
80
V/R2/Pr
70
U/B2/Pb
71
Y/G2/Y
72
YSYNC
73
CVBS3/Y3
58
C2/C3
59
CVBS2/Y2
55
CVBS4/Y4
51
C4
52
AUDIO2_INL
53
AUDIO2_INR
54
AUDIO3_INL
56
AUDIO3_INR
57
AUDIO4_INL
49
AUDIO4_INR
50
AUDIO5_INL
34
AUDIO5_INR
35
VGUARD
13
PH1LF
17
PH2LF
16
SECPLL
19
DECBG
20
EWD/AVI
21
VDRB
22
VDRA
23
VIFIN1
24
VIFIN2
25
VSC
26
IREF
27
GNDIF
28
SIF1
29
SIF2
30
AGC
31
EHT
32
SSIF
33
AUDOUTSL
36
AUDOUTSR
37
DECSDEM
38
QSSO
39
SIFAGC
42
PLLIF
41
IFVO
43
FMRO
44
SVO/CVBSI
48
AUDIO_OUT_HPL
62
AUDIO_OUT_LSL
60
AUDIO_OUT_LSR
61
AUDIO_OUT_HPR
63
CVBSO/PIP
64
SVM
65
FBISO
66
HOUT
67
YOUT
74
UOUT/INSSW2
75
VOUT/SWO1
76
BCLIN
83
BLKIN
84
ROUT
85
GOUT
86
BOUT
87
REFAD
91
INT0
97
P10/INT1
98
P11/T0
99
P04/I2SWS
102
P03/I2SCLK
103
P02/I2SDO2
104
P01/I2SDO1
105
P00/I2SDI1/0
106
P13/T1
107
P16/SCL
108
P17/SDA
109
P20/TPWM
111
P21/PWM0
112
P22/PWM1
113
P23/PWM2
114
P30/ADC0
115
P31/ADC1
116
P32/ADC2
119
P33/ADC3
120
P24/PWM3
122
P25/PWM4
123
P12/INT2
126
P14/RX
127
P15/TX
128
AGC2SIF
46
U2B
TDA15021H_2
Select Y2 - Saronix 9922 520 20264
R
2
1
0
3
.3
K
C
9
8
2
2
0
p
F
VCC5
VCC5
C106
47uF16V
R211
10
R212 100
R213 100
R214 100
R215 100
R216 100
Q7
2N3904
R227 100
R228 100
R229 100
R230 100
R231 100
R232 100
R233 100
R235 100
R236
100
R238 100
R234 100
R114 100
R
1
1
5
3
.3
K
PWRON
R
1
0
6
3
.3
K
C248
100uF16V
FB42
C151
0.1uF
C247
100uF16V
G
N
D
1
O
U
T
2
V
I
N
3
4
4
U22
NCP1117DT18RK
C152
0.1uF
C100
0.1uF
K3953M
K9656M
R125
10K
IFGND IFGND
C149 0.1uF
C150 0.1uF
DVD_C2IN
DVD_Y2IN
C246 2.2uF
C245 2.2uF
DVD_AUD_LIN
DVD_AUD_RIN
VCC5
R
1
1
6
3
.3
K
R
1
1
7
3
.3
K
EN_DPF_DVD
IFGND
FB50
IFGND
V1_8DIG
R96 100
FB56
V3_3D
V1_8V1
FB43
Q9
Si2311DS
R243 10K
VCC5
Q26
2N3904
MUTE
R246
0
VCC5
TV_VSYNC
VCC5A
C84
0.1uF
C5 0.1uF
R167 100
C139 0.1uF
C4 0.1uF
SCART_R_IN
SCART_G_IN
SCART_B_IN
FBLIN
R170 1K
SC_CVBSOUT
SC_AUD_LIN
SC_AUD_RIN
STAT_AV
R237 100
SC_AUD_LOUT
SC_AUD_ROUT
C140
10uF16V
C141 10uF16V R169
100
R168
100
-40 -

Version: 1.0

1 2 3
A
B
C
D
4 3 2 1
D
C
B
A
Title
U_for_MP_
LS07-EU-MUX/AUDIOAMP/TDA9178
YIN
6
UIN
8
VIN
9
YOU
19
UOUT
17
VOUT
16
SC
1
SDA
14
SCL
11
VCC
20
ADCEXT1
3
ADCEXT2
4
ADCEXT3
5
DECDIG
15
ADR
7
TP
10
VEE
18
NC
23
NC
24
NC
2
U7
TDA9178T
R145 100
R146 100
R147 100
C119
0.1uF
C114
100uF16V
12Va
SANDC
V_IN
V_OUT
Y_IN U_OUT
U_IN
Y_OUT
SDA_UOC
SCL_UOC
TV_HSYNC
TV_DPF_VSIN
TV_DPF_HSIN
C115
0.1uF
I
N
1
G
N
D
2
O
U
T
3
4
4
U17
MC78M08CDT
FB23
C113
0.1uF
C112
100uF16V
R131
10K
R130
4.7K
R133
470
R148
10K
C117 10uF16V
R139
4.7K
R151
75
R150
470
R239 75
R240 75
R241
75
C250
22pF
FB46 ECI2012M2R2KT
C255
470pF
C256
470pF
C251
22pF
C252
22pF
DD
9
S2D
10
S1A
2
IN
1
S1B
5
S2A
3
S2B
6
S1C
14
S2C
13
DC
12
S1D
11
/EN
15
DA
4
V
C
C
1
6
G
N
D
8
DB
7
U20
PI5V330A
C258
470pF
C257
470pF
FB47 ECI2012M2R2KT
C108 10uF16V
C237
0.1uF
C238
10uF16V
C249
10uF16V
C153
0.1uF
C154
0.1uF
FB45 ECI2012M2R2KT
C253
470pF
C254
470pF
R137
4.7K
R141
470
R138
10K
C116 10uF16V
R142
75
R134
75
VCC5A
VCC5A
TV_B
TV_R
TV_G
DPF_RIN
DPF_GIN
DPF_BIN
C105
12pF
C93
12pF
C102
12pF
FB7
ECBP2012M700T
FB11
ECBP2012M700T
R4
75
R6
75
R5
75
FB6
ECBP2012M700T
TV_DPF_RIN
TV_DPF_GIN
TV_DPF_BIN
R57 100
R58 100
R59 100
C234 47nF
C235 47nF
C236 47nF
TV_DPF_SW
1: Select DPF
0: Select TV
R122 75
R121 75
TV_DPF_SW
1
2
3
4
5
6
7
8
9
10
11
12
13
J10
CON13
DPF_RIN
DPF_GIN
DPF_BIN
DPFSignal Input
DPF_VSI N
DPF_HSIN
FB54
ECBP2012M801T C264 220pF
C265 33pF
R140 1K
FB55
ECBP2012M801T
R149 1K
R182 2.2K
R132 10K
C264,C265 option (open for better phase)
FB44 ECB2012M800T
FB37 ECB2012M800T
Q12
2N3904
Q14
2N3904
Q15
2N3904
TV_VSYNC
3 2
1
1
4
7
U10A
74LVC126A
8 9
10
U10C
74LVC126A
V3_3M
11 12
13 U10D
74LVC126A
6 5
4 U10B
74LVC126A
V3_3M
R14
10K
Q2
2N3904
R15
3.3K
-41 -

Version: 1.0

1 2 3 4 5 6
A
B
C
D
6 5 4 3 2 1
D
C
B
A
Title
41208.DDB
GB2
BB1
BB3
RB1
RB5
GB3
GB4
GB[0..7]
GB5
GB6
GB0
RB0
BB4
BB[0..7]
RB[0..7]
RB2
BB2
BB6
GB7
BB0
RB6
GB1
RB4
BB7
RB3
BB5
RB7
FB27
ECBP2012M801T
C178
10uF16V
C262 0.1uF
C162
10uF16V
C170
10uF16V
Y2
14.318MHZ
R175 390
RIN0
75
GIN0
72
SOGIN0
73
BIN0
70
RIN0M
74
GIN0M
71
BIN0M
69
HSYNC0
38
VSYNC0
39
REFP
79
RMID
78
ALE/CSZ
82
WRZ/MST_SDA
83
RDZ/MST_SCL
84
HWRESETZ
33
INT
85
PWM0
86
PWM1
87
RA0/LVACKP
131
RA1/LVACKM
132
GA0
115
GA1
116
BA0
103
BA1
104
RB0
15
RB1
16
A
V
D
D
4
8
A
V
D
D
_
P
L
L
5
6
A
V
D
D
5
4
BYPASS
2
A
V
D
D
5
8
V
D
D
P
8
8
V
D
D
P
9
9
V
D
D
P
1
1
1
V
D
D
P
1
2
9
V
D
D
P
1
3
9
V
D
D
P
1
5
1
V
D
D
P
1
0
V
D
D
C
1
0
2
V
D
D
C
1
1
4
V
D
D
C
1
4
2
V
D
D
C
1
9
G
N
D
1
G
N
D
9
REFM
80
G
N
D
2
1
G
N
D
3
7
G
N
D
2
0
G
N
D
4
2
G
N
D
4
5
G
N
D
5
1
G
N
D
5
7
G
N
D
7
6
G
N
D
8
1
G
N
D
8
9
G
N
D
1
0
0
G
N
D
1
0
1
G
N
D
5
9
G
N
D
1
1
2
XIN
34
XOUT
35
RA2/LVA2P
133
RA3/LVA2M
134
RA4/LVA1P
135
RA5/LVA1M
136
RA6/LVA0P
137
RA7/LVA0M
138
GA2
117
GA3
118
GA4
119
GA5
120
GA6/LVA3P
127
GA7/LVA3M
128
BA2
105
BA3
106
BA4
107
BA5
108
BA6
109
BA7
110
RB2
17
RB3
18
RB4
23
RB5
24
RB6
25
RB7
26
GB0
5
GB1
6
GB2
7
GB3
8
GB4
11
GB5
12
GB6
13
GB7
14
BB0/LVB2P
147
BB1/LVB2M
148
BB2/LVB1P
149
BB3/LVB1M
150
BB4/LVB0P
153
BB5/LVB0M
154
BB6
3
BB7
4
OCLK/LVBCKP
145
LDE/LVBCKM
146
DDC_CLK
30
DDC_DAT
29
DDCROM_CLK
31
DDCROM_DAT
32
LHS/LVB3P
143
LVS/LVB3M
144
REXT
55
RIN1
65
RIN1M
66
GIN1
63
GIN1M
64
SOGIN1
62
BIN1
60
BIN1M
61
HSYNC1
40
VSYNC1
41
G
N
D
1
1
3
G
N
D
1
3
0
G
N
D
1
4
0
G
N
D
1
4
1
A
V
D
D
7
7
A
V
D
D
_
M
P
L
L
3
6
V
D
D
P
2
2
BUSTYPE
125
AD0
91
AD1
92
AD2
93
AD3
94
AD4
95
AD5
96
AD6
97
AD7
98
G
N
D
1
5
2
U3
MST518
C181
0.1uF
R123 0
FB30
ECBP2012M801T
FB26
ECBP2012M801T
C164
0.1uF
C171
0.1uF
C163
0.1uF
C172
0.1uF
C165
0.1uF
C259
0.1uF
C173
0.1uF
C180
10uF16V
C145 22pF
C174
0.1uF
FB29
ECBP2012M801T
C176
0.1uF
C175
10uF16V
C177
0.1uF
C144 22pF
C260
0.1uF
C261
0.1uF
C263
0.1uF
FB28
ECBP2012M801T
R124 10K
C143
0.1uF
C166
0.1uF
C179
0.1uF
C167
0.1uF
C142
0.1uF
C168
0.1uF
C169
0.1uF
VDPLL
VDPLL
VAD
VDD
V3_3M
V3_3M
V3_3M VPLL
VDD
VPLL VPO
VAD
VPO
VAD
V3_3M
V2_5M
TV_DPF_HSIN
TV_DPF_VSIN
PC_HSIN
PC_VSIN
TV_DPF_BINM
TV_DPF_BIN
TV_DPF_GINM
TV_DPF_GIN
TV_DPF_RINM
TV_DPF_RIN
SOGIN1
G_RIN
G_GIN
G_BIN
G_RM
G_GM
G_BM
SDA_MST
SCL_MST
CSZ_MST
RST_MST
INT_MST
RB[0..7]
GB[0..7]
BB[0..7]
PCLK
PDEN
PHSYNC
PVSYNC
LS07-EU-MST518
RX0+
RX0-
RXCLK-
RXCLK+
RX1-
RX1+
RX2-
RX2+
RX3-
RX3+
R189
100
C159
47nF
R190
100
C160
47nF
R191
100
C161
47nF
R186
100
C156
47nF
R187
100
C157
47nF
R188
100
C158
47nF
TV_DPF_RINM
TV_DPF_GINM
TV_DPF_BINM
G_RM
G_GM
G_BM
1
2
3
4
5
6
J15
CON6
SDA_MST
SCL_MST
CSZ_MST
RST_MST
VCC5
Only for Debug
GA7
GA6
RA0
RA1
RA2
RA3
RA4
RA5
RA6
RA7
Option: C263 and R123
-42 -

Version: 1.0

1 2 3 4 5 6
A
B
C
D
6 5 4 3 2 1
D
C
B
A
Title
41208.DDB
GB1
GBO6
BBO2
GB3
BB[0..7]
BBO3
GB5
RB3
RB2
RBO7
RB5
GB0
GBO2
PCLKO
BBO1
BB3
RB4
BB1
BB7
BBO5
BBO[0..7]
BBO2
GBO0
GB6
BBO4
BBO0
RB6
BB4
RB[0..7]
GBO3
RBO4
BB6
RB0
GB4
GBO[0..7]
PVSO
PDEO
PCLKO
BBO6
RB1
RBO2
RBO[0..7]
GBO6
RBO5
GBO5
PDEO
GBO4
RBO7
GB7
BB2
PVSO
BBO5
GBO2
RBO6
GBO0
RBO6
RBO5
PHSO
RBO4
RBO3
RBO2
BB5
RBO1
GB2
BBO4
GBO7
GBO5
RBO0
GBO1
RBO1
BBO7 RB7
BBO0
GBO4
BBO7
BBO3
BB0
GB[0..7]
BBO6
GBO7
GBO3
BBO1
R127 33
RBO3
R128 33
C276
33pF
R135 33
R136 33
C277
33pF
C278
33pF
RBO0
C279
33pF
VCC
1
VCC
2
GND
3
GND
4
RxE3+
18
RxE3-
17
RxEC+
15
RxEC-
14
RxE2+
12
RxE2-
11
GND
10
RxE1+
9
RxE1-
8
GND
7
RxE0+
6
RxE0-
5
GND
13
GND
16
GND
19
GND
20
J16
DF14-20P-1.25H
GBO1
L
R
NC
50
NC
49
NC
48
GND
47
GND
46
VCC
45
VCC
44
VCC
43
VCC
42
GND
41
HSYNC
40
R5
31
R6
32
R7
33
GND
34
GND
36
DE
37
GND
38
VSYNC
39
DCLK
35
R4
30
G5
21
G6
22
G7
23
GND
24
R1
26
R2
27
R3
28
GND
29
R0
25
B5
11
B6
12
B7
13
GND
14
G1
16
G2
17
G3
18
GND
19
G4
20
G0
15
B4
10
GND
9
B3
8
B1
6
B2
7
B0
5
GND
4
GND
3
NC
2
NC
1
J17 FH12-50S-0.5SH
BB[0..7]
PHSO
PCLK
PHSYNC
RB[0..7]
PVSYNC
GB[0..7]
PDEN
VLCD
VLCD
RX0+
RX0-
RXCLK-
RXCLK+
RX1-
RX1+
RX2-
RX2+
RX3-
RX3+
R143 0
LS07-EU-15" 17" 20" LCDPanel
RA0
RA1
RA2
RA3
RA4
RA5
RA6
RA7
GA6
GA7
1
2
3
4 5
6
7
8 RN1
33 OHM
1
2
3
4 5
6
7
8 RN2 33 OHM
1
2
3
4 5
6
7
8 RN3
33 OHM
1
2
3
4 5
6
7
8 RN4 33 OHM
1
2
3
4 5
6
7
8 RN5 33 OHM
1
2
3
4 5
6
7
8 RN6
33 OHM
CN1
33pF
CN2
33pF
CN3
33pF
CN4
33pF
CN5
33pF
CN6
33pF
123456789
1
0
1
1
1
2
1
3
1
4
1
5
1
6
1
7
1
8
1
9
2
0
2
1
2
2
2
3
2
4
2
5
2
6
2
7
2
8
2
9
3
0
3
1
3
2
3
3
3
4
3
5
3
6
3
7
3
8
3
9
4
0
J22
DP13-40DP-1.25V
PDEO
VLCD
-43 -

Version: 1.0

1 2 3 4 5 6
A
B
C
D
6 5 4 3 2 1
D
C
B
A
Title
41208.DDB
HP_ROUT
HP_LOUT
FB22
ECB2012M102T
C110
0.1uF
C109
22uF16V
VCC5A
C111
100uF16V
C118
100uF16V
+
-
3
2
1
8
4
U5A
TDA1308
+
-
5
6
7
U5B
TDA1308
VCC5
HP_IDENT
IN1+
3
IN2-
18
MODE
17
SVRR
5
SGND
4
PGND
10
PGND
11
VDD
15
VDD
16
OUT1A
8
OUT1B
9
OUT2A
12
OUT2B
13
NC
1
NC
2
NC
6
NC
7
NC
14
NC
19
NC
20
U8
TDA1517AWT
R157 2.2K
R158
1.5K
R160 2.2K
R159 1.5K
C126 220nF
C127 220nF
C128
100uF16V
M_LOUT
M_ROUT
C130
470uF16V
12V
1
2
J13
2 HEA
PGND
12V
FB24
ECB2012M800T
C132
470uF25V
C129
0.1uF
To L_SPK
R161
10K
R156
4.7K
ASTB
PGND
Q5
2N3904
C293
220uF16V
D16 IN4148
12V
12V
R144
220
R164
22K
R165
33K
R163
100K
LS07-EU-SoundAmplifierandHeadphone
1
2
3
4
5
6
J12
CON6
To Headphone
R176
1K
R177
3.3K
Q16
2N3904
Q3
2SA1162
R162
8.2K
Q27
2N3904
MUTE
R245
4.7K
C296 4.7nF
C295 4.7nF
R201
15K
R199
15K
C229
470nF
C104
470nF
C267
470nF
R197
5.6K
R198
5.6K
R108
3.3K
R181
3.3K
C268 680pF
C269 680pF
PGND
FB48
IN1+
3
IN2-
18
MODE
17
SVRR
5
SGND
4
PGND
10
PGND
11
VDD
15
VDD
16
OUT1A
8
OUT1B
9
OUT2A
12
OUT2B
13
NC
1
NC
2
NC
6
NC
7
NC
14
NC
19
NC
20
U21
TDA1517AWT
C27 220nF
C28 220nF
C25
100uF16V
C131
470uF16V
1
2
J14
2 HEA
PGND
12V
FB59
ECB2012M800T
C50
470uF25V
C19
0.1uF
To R_SPK
PGND
PGND
FB60
R30
10K
C66
47uF16V
-44 -

Version: 1.0

1 2 3 4
A
B
C
D
4 3 2 1
D
C
B
A
Title
r_MP_2004
LS07-EU-POWERSUPPLY
+12V
+12V
GND
GND
JP1
4PIN_POWER
Vin
1
Feedback
4
O
N
/O
F
F
5
output
2
G
N
D
3
U9
LM2596-5.0
C189
0.1uF
D12
1N5824
L3
68uH
C192
1uF/50V
C193
1uF/50V
C194
1uF/50V
C196
1uF/50V
C197
1uF/50V
C195
1uF/50V
12Va
L4
TEM2011
VCC5
C190
0.1uF
C186
0.1uF
C187
470uF25V
12V
R192
2.2K
+34V
3
4
5
6
U11B
IRF7316
R195 10K
C219 0.1uF
R194 10K
1
2
7
8
U11A
IRF7316
12V 12Va
VCC5_SW VCC5
PWRON
R203 10K
C228 0.1uF
R202 10K
G
N
D
1
O
U
T
2
V
I
N
3
4
4
U13
NCP1117DT33RK
C201
100uF16V
C203
220uF16V
C202
0.1uF
C200
0.1uF
C205
0.1uF
FB31
VCC5
V3_3D
C225
100uF16V
FB33
FB36
C223
0.1uF
C222
100uF16V
G
N
D
1
O
U
T
2
V
I
N
3
4
4
U15
LM1117-2.5V
C226
0.1uF
C220
0.1uF
C207
100uF16V
G
N
D
1
O
U
T
2
V
I
N
3
4
4
U14
LM1084-3.3V
C208
0.1uF
C211
0.1uF
C210
220uF16V
C206
0.1uF
VCC5_SW
V3_3M
ON_PANEL
C231
0.1uF
C232
100uF16V
VLCD
12V
To Inverter
VCC5
12V
ON_BACKLITE
R196
3.3K
R204 2.2K
C215
0.1uF
C217
0.1uF
R193
10K
C216
0.1uF
I
N
1
G
N
D
2
O
U
T
3
4
4
U18
MC7805CD2T
3
4
5
6
U12B
IRF7316 C214
0.1uF
C218
100uF16V
C213
470uF25V
C212
0.1uF
12V VCC5A
R200 10K
PWRON
PWRON
R207 10K
C230 0.1uF
R206 3.3K
SAMSUNG 15"17" : +3.3V LG 17" 20": +12V
FB41
ECBC2012M800T
FB40
ECBC2012M800T
FB39
ECBC2012M800T
VCC5
Stuff one of FB39,FB40,FB41 for different Panel !
C191
470uF16V
C188
1000uF16V
Q20
2N3904
Q22
2N3904
Q21
2N3904
Q24
2N3904
R242
0
S
1
S
2
S
3
G
4
D
5
D
6
D
7
D
8
U19
NTMS10P02R
VLCD
AU 20": +5V
1
3
2
D13
BAV99
1
3
2
D14
BAV99
1
3
2
D15
BAV99
EN_DPF_DVD
R28 10K
R166 3.3K
VCC5
Vin
1
Feedback
4
O
N
/O
F
F
5
output
2
G
N
D
3
U23
LM2596-5.0
C243
0.1uF
D17
1N5824
L6
68uH
C134
0.1uF
C292
470uF25V
12V
C294
1000uF16V
1
2
3
4
5
6
7
8
J19
CON8
PW_DPF_DVD
SDA_DPF
SCL_DPF
1
2
3
JP2
DAP
12V
Power Supply to DPFor DVD
V2_5M
V3_3M
1
2
3
4
5
6
J18
CON6
Q25
2N3904
Q4
2N3904
R19
RY21-2W-6.8
-45 -

Version: 1.0

1 2 3 4
A
B
C
D
4 3 2 1
D
C
B
A
Title
041208.DDB
IN1
1
OUT1
2
OUT2
3
IN2
4
CON2
5
CON3
6
GND
7
IN3
8
OUT3
9
OUT4
10
IN4
11
CON4
12
CON1
13
VCC
14
U24
MC14016BDR2
VCC5
C65
0.1uF
R17
10k
R18
4.7k
UPDATE CON= +5V, VGA CONNECT WITH UOC
UPDATE CON= 0V, VGA CONNECT WITH DDC
VCC5
UPDATE_CON
VGA_SCL
VGA_SDA
DDC_SDA
DDC_SCL
SCL_UOC
SDA_UOC
LS07-EU-VGA PORT UPDATE PROGRAM
Q6
2N3904
-46 -

Version: 1.0

-47 -

Version: 1.0

WIRING DIAGRAM

Put on
pyrocondensation
Wiring horness
Yellow/ green
Umber
Blue
The wiring connection diagram of
power supply socket
1. Connect each wiring horness and plug with cord according to final wiring connection
diagram.
2. The assembly position of each wiring horness and plug with card are confirmed by
technologist and fix then at proper location.
3. The paste location of certificate and breakable label is confirmed by technologist
make sure the consistency of location.
4. Suspending panel is covered by protective film.
5. Paste insulative board onto transition assembly, then install built-in power supply
module.
6. Check if each bottom could mark, if so, protect the four corners of the front frame with
blue adhesive tape. The method is confirmed by technologist.
Make sure the side with mark "O" should be forward the display panel then installing the
power supply switch.
-48 -

Version: 1.0

EXPLODED VIEW

-49 -

Version: 1.0

PART LIST

NO PART NAME
1 Chassis assembly
2 Front frame assembly
3 Front frame assembly
4 Back cover assembly
5 Base assembly
10 Tapping screw 3x10
13 Screw assembly M3x8
14 Screw assembly M4x6
15 Clip (RJ050)

Akira LCD 20chst

Uploaded by

Copyright:

Available Formats

Akira LCD 20chst

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Akira LCD 20chst

Uploaded by

Copyright:

Available Formats

LCT TV

You might also like