Terminal Assistant v6 0 User Guide

Professional Creditable and Successful Beijing DIWN Technology Co.
, Ltd
Terminal Assistant V6.0 Help Document. 1

2
0
1
2

Beijing DWIN Technology Co., Ltd
Terminal Assistant V6.0
Help Documents

Professional Creditable and Successful Beijing DIWN Technology Co., Ltd
Index
Chapter One Software Configuration .......................................................................................... 3
1.1Software Operating Environment Creation .......................................................................... 3
1.1.1 USB Driver ............................................................................................................. 3
1.1.2 Terminal Assistant Operating Environment .Net Framework 2.0 .......... 3
1.1.3 Files Included in DWIN Terminal Assistant v6.0 .............................................. 4
Chapter Two Software Operating Instruction ............................................................................. 5
2.1 Software Introduction ......................................................................................................... 5
2.2 Software Operating Instruction ........................................................................................... 5
2.2.1 Interface Window Introduction ............................................................................ 6
2.2.2 Tools Column ......................................................................................................... 6
2.2.3 Picture Setting ....................................................................................................... 9
Chapter Three Software Function Instruction .......................................................................... 11
3.1 Basic Graphic Operations ................................................................................................. 11
3.2 Touching Function Configuration ..................................................................................... 12
3.2.1 Tool Bar................................................................................................................ 12
3.2.2 Configuration Area ............................................................................................. 14
3.2.3 Touch Configuration Function Setting Area ................................................... 14
3.2.4 Configuration Area Composing Techniques: ................................................. 15
3.3 System Setting and Instruction Debugging ....................................................................... 16
3.3.1 Terminal Mode Parameter Configuration ........................................................ 16
3.3.2 Terminal Peripheral Configuration .................................................................... 17
3.3.3 Displaying Parameter Setting ........................................................................... 20
3.3.4 Picture Download ............................................................................................... 21
3.3.5 Font Download .................................................................................................... 22
3.3.6 Configuration File Download ............................................................................. 23
3.3.7 Self-write Instruction........................................................................................... 23
3.3.8 Picture Cut ........................................................................................................... 24
3.3.9 Text Display ......................................................................................................... 25
3.3.10 Extended character .......................................................................................... 26
3.3.11 Dynamic Graphics ............................................................................................ 27
3.4 Operation Blogs ................................................................................................................ 29

Chapter One
Software Configuration
1.1Software Operating Environment Creation
This software is suitable for Window7 or XP system, about 50M space is
needed.
Tools needed are listed as follows:
1.1.1 USB Driver
A, CP2102 chip USB driver
B, XR21V1410 Chip driver
You can choose from the two drivers below based on the serial port of your
UART UCM and choose installing driver. Chip on the left needs CP2102 chip
USB driver.Chip on the right needs XR21V1410 Chip driver.

1.1.2 Terminal Assistant Operating Environment .Net Framework 2.0
Download the terminal assistant from the company's web
site(http://www.dwin.com.cn/download.aspx?id=12) unzip the downloaded
Framework2.0.rar and dotnetfx2.0.exe to finish the installation.

1.1.3 Files Included in DWIN Terminal Assistant v6.0

Chapter Two
Software Operating Instruction
2.1 Software Introduction
First, the introduction of the concept of project management can achieve the
separate management of images and configuration files based on applications.
For different applications, users can establish a different project file to manage
pictures and touch configuration. It is easy for users to maintain and
management different products.
Second, by adding basic graphics operation and demonstration interface,
users can carry out simple drawing demonstration operation, making the
operation more intuitive. They all can be unified to the DWIN screen for
presentations.
Third, enhance the operation logging function, users can record pictures and
font download instructions, for users' reference in the process of programming.
Four, enhanced touch configuration management make it more convenient
than the previous version in the operation and configuration management.
2.2 Software Operating Instruction

Start "DWIN Terminal Assistant 6.0", the following interface will show up, set
the storage path, and click OK to enter the main program. If previously used
project exist in the storage path, the system will automatically open the project
file under the path and read and deal with the size and pixels. If you want to
modify the size and pixels, please do it in [DWIN Property] of the main program.
Otherwise, the system will do the initialization in accordance with the current
set size and pixel.
2.2.1 Interface Window Introduction
The main interface introduction is as follows:

You can see tools column, picture setting, function area and blog above.
2.2.2 Tools Column

(a) Project File Management Column
Including buttons of New, Open, Close, Save and Screen Property
Function Description
New Click New as shown follows:
Tools Column
Pictures
Setting
Function Area
Blog
Project File Management
Column
Operating Tool
Column of
Serial Port

Step One: In order to enable DWIN UART UCM's image and graphics
operations, please choose pictures corresponding to the screen size and
image pixels.
Step Two: Select the storage path, the default path is the current directory of
debugging assistant 6.0 executable file. If you want to make application
configuration management, it is recommended to select a new file path (Click
button to select). In the operation process, the system will save your
image files and configuration files in a unified directory of your chosen directory,
the next time you open the system, the system will load all of your
configuration automatically to facilitate further change and adjustment.
Openopen the project file stored here, see the following picture

The system will load the project fileDWprj.hmito the system to make it
convenient for modification and configuration.
Default
Project File
Close Close the current project file.
SaveSave the current project file to modify next time.
Property of DWIN UART UCM The current property of the UART UCM,
adjusting the screen size and pixel in Screen Property.
Rotate Angle choose the image showing ways, 0 degree and 90 degree
two ways.

(b) Operating Tool Column of Serial Port
Serial port tool column is mainly used to realize human-computer interaction
between PC and DWIN UART UCM. Select the correct serial port channel and
baud rate, and click to open the serial port, then you can enter the
human-computer interaction.

Port: as it is shown in the following pictures , only by opening the serial port,
can the interaction between UART UCM be realized.

If you can not find the corresponding serial port in the list, please open the
serial port choosing list:

Click refresh, the system will refresh the list automatically, and show all the
serial port in the operation system.
Handshake to examine whether DWIN UART UCM is connecting properly,
if so ,go back to the current version information and system configuration
information of the serial port.
Screen Clearance send the screen clearing instruction and clear the
screen.
Background color setting
Front color setting
Touch Calibration Send the touch calibration instruction, and then DWIN
UART UCM enters the calibration interface, click the cross cursor on upper left,
upper right, lower right to complete the calibration operation.
Touch ScreenAfter it is started, once the user presses the touch screen,
there will be a red solid circle displayed in the corresponding coordinates to
facilitate users to test touch screen accuracy.
2.2.3 Picture Setting
The current picture of the project will require a unified management, click
Add button to add a picture to the project, and adjust the position value and
picture order. (After adding images, the software will copy the image file under
the project directory and make the unified management). Figure:

After connecting UART UCM, conduct picture
saving and switching operation, clicksaveto
save the picture on the screen to a certain place.
This option is to decide when choosing
the basic picture list, whether the picture
is shown in theBasic Picture Operation
Click here and the system will
hide the picture automatically
Add to add buttonssee the following picture
Choose the picture that need added, click open, then the system will add the
picture in the list.DeleteIncluding delete the selected rows and delete all.
Click to delete the selected row to delete the line of selected pictures. Click the
Delete all, then the system will clear all the pictures in the list.

UpMove the line selected up one line.
DownMove the line selected down one line.

Chapter Three
Software Function Instruction
Function Instruction of the software includes Basic Graphic Operations,
Touching Function Configuration and Debug Tools.
3.1 Basic Graphic Operations
The user can conduct simple graphics and text presentations in the demo
screen. Figure:

Click the [send] button on the tool column , then the drawing graphics will be
sent to DWIN UART UCM as shown in the picture.
Operation Example
Step 1: Click the button representing different graph in the tool column,

Step 2 Click the displaying screen and move it until it is in proper size, then
get loose of the mouse and start drawing.
Step 3: If clients want to draw more graphs, repeat the second step and repeat
the first step if clients want to draw other graphs.
Screen Size Management: input number or click "+" or "-" to realize the
adjustment of size.

3.2 Touching Function Configuration
Function Instruction: set touch configuration area in pictures to facilitate clients
to conduct different operations.

3.2.1 Tool Bar

Add Buttonclick and conduct area setting in configuration area, specific
operation: move the mouse to configuration area and conduct the setting.
Figure: add a touch configuration area in the picture, the interface
change into setting status.
Align Leftusers can select more than one configuration areas, click on this
button, then the system will conduct left-aligned based on the first selected
region.
Align TopDitto.
Copyto select one or more regions and copy.
Pasteonly take effect by clicking "Copy" and paste buttons, and copy the
Configuration
Area
Configuration
Setting Area
Tool Column
area to the configuration area, If you want to paste it onto the configuration
page of another picture, click on the corresponding picture in the picture list,
and then click the Paste button.
Move up Move down move up or down of the configuration area for
user-friendly purpose. Screen size Management: Figure, you can enter a
number and click "+", "-" button control the size.

Previewafter setting up the touch region, click the Preview button, then you
can test whether the picture jumping setting is correct or not.
Figure:
Click touch configuration area, the system will switch image location according
to your settings, automatically jump to the corresponding picture.
Touch configuration generation, in order to generate touch configuration file,
users can use the Configuration File Deliver in the Debug Tools, and
send the configuration file to the screen. In order for UART UCM to follow the
configuration file order to realize picture switch and instruction uploading
function, please set it based on terminal parameter mode setting in the debug
tools.
Touch Configuration
Area

3.2.2 Configuration Area
Display the chosen picture in the picture-setting area, users can set one or
more touch configurations for the need of DWIN UART UCM.
3.2.3 Touch Configuration Function Setting Area
Conduct setting in the chosen touch configuration area, for example, Go to,
Area Cut Displayand Code CMD.
Shown as follows

Click Go to and theset button on the left of animation effect, please
choose the picture

Click the Selection button on the right of the code instruction to set
button-back instruction: shown as follows,

Click Selection button to go back to the chosen data in the specified line,
shown as the picture:

If there are many touch configuration areas to set, repeat the operations above
to realize the setting. If you want to set other pages, choose the corresponding
pictures on the left to repeat the operations to set the configuration.
3.2.4 Configuration Area Composing Techniques:
When there are many touch configurations on the page, the aligning method
can be tricky, in V6.0 version, left-aligned and up-aligned are provided .
For example,

There are four touch configuration, if you want to align quickly,
Step 1: use the mouse to click on other places on the screen and pull to the
specified area
Step2: click align button , then the system will make the
up-aligning, if you want to conduct left-aligning, do as above.
Click "Add" to put data in the
editorial box in the list on the
left, and then click "modify" to
change data in the editorial
box into the list on the left.
Users add all the instructions
through this function in the
project.
3.3 System Setting and Instruction Debugging
Function Description:
Management tool to set and conduct debugging to DWIN UART UCM
As the picture shows, the left of the interface is the tool column, including all
kinds of functional management button related to DWIN UART UCM.
Click the corresponding button and show the function displayed on the right of
the window (shown in the picture below), users can set and conduct
instruction-debugging based on need.
3.3.1 Terminal Mode Parameter Configuration
Click Setto send the following instruction
Tx: AA E0/E3 55 AA 5A A5 <TFT_ID> <Bode_Set> <Para1> CC 33 C3 3C
Or AA E0/E3 55 AA 5A A5 <TFT_ID> <Bode_Set> <Para1> <Para2> CC 33
C3 3C H600K600+support
DWIN UART UCM will reply:
Rx: AA E0/E3 <TFT_ID> <Bode_Set> <Para1> CC 33 C3 3C
Or AA E0/E3 <TFT_ID> <Bode_Set> <Para1> <Para2> CC 33 C3 3C only
H600K600+support
0xE3 Instruction only support version above V6.0; what is different with 0xE0
instruction is that version above V6.0 do not save data when 0xE0 instruction
change the parameter, but 0xE3 instruction will save under the same
circumstances.
<TFT_ID> configuration TFT screen parameter; (versions after V5.3 are
not open to clients, 0x00 will be fine)
<Bode_Set> Set the serial communication baud rate as follows (DWIN
UART UCM factory default is 0x07):

Such as: on the map, click on Settings in the operating log, see the following
data:
Terminal Mode parameter settings: 0xAA, 0xE0, 0x55, 0xAA, 0x5A, 0xA5,
0x00, 0x07, 0x00, 0xCC, 0x33, 0xC3, 0x3C
Reception: AAE0020700CC33C33C
3.3.2 Terminal Peripheral Configuration

(a) Clock
Function Set the system clock displaying mode, adjust the system time of the
UART UCM and read the clock
Clock displaying mode: Click the [Open] or [OFF] button, conduct the display
settings, adjust the parameters according to the input bar.
Clock Adjustment:
System Timeset the actual time to DWIN UART UCM.
Definition of Timeclients can input date and time, and set the time to DWIN
UART UCM .
Read DWIN UART UCM clock:
Gregorian calendar date is displayed based on Gregorian calendar

Lunar calendar date is displayed based on Gregorian calendar

(b) Back Light Setting
Tx: AA 5E 55 AA 5A A5 <V_ON> <V_OFF> <ON_TIME> CC 33 C3 3C
Rx: nothing
<V_ON> click the touch screen(or keyboard), the back light is on
automatically, 0x00-0x3F
<V_OFF> the back light go off automatically if no touch of screen or keyboard
for a while, 0x00-0x3F
<ON_TIME> the time the back light is onevery 0.5s0x00-0xFF127.5s at
most
Back light mode set will be preserved. When the back light turns off, the first
click will only be lit back light but not process.
Backlight brightness touch (keyed) function should use the 0xE0 instruction .
(c)Buzzer
Set the length of the buzzer
Tx: AA 79 <On_Time> CC 33 C3 3C
Rx: no
<On_Time> 0x01-0xFFunit is 10mS
(d) HMI and Video Switch
Simulated Video Play
Tx: AA 7A <Work_Mode> <Video_Mode> <Video_CH> CC 33 C3 3C
Rx: no
<Work_Mode> 0x00=HMI 0x01=Video
<Video_Mode> 0x00=PAL 0x01=NTSC
<Video_CH> 0x00=CVBS interface input video signal 0x01=S terminal
input video signal
Digital Video Display based on SD Card
Tx: AA 7A <Work_Mode> <KEY_VALUE> CC 33 C3 3C
Rx: no
<Work_Mode> 0x00=HMI 0x01=Video display
<KEY_VALUE> under video displaying mode, function key, defines as
KEY_VALUE Function key instruction
0x00 Key up
0x01 Play/Pause Press
0x02 turn on the sound
0x03 turn off the sound
0x04 Menu Operationconfirm Press
0x05 Menu Operationmove right Press
0x06 Menu Operationmove forward Press
0x07 Menu Operationquit Press
0x08 Menu Operationvolume up Press
0x09 Menu Operationvolume down Press
0x0A Menu OperationChinese/English Press
(d) Touch Screen Function
Including Touch Calibration and Touch Screen.
Touch Calibration
Tx: AA E4 55 AA 5A A5 CC 33 C3 3C
Send commands, follow the on-screen prompts, then click the touch position
on the screen, the "upper left" , "upper right" "lower left" ; when the calibration
is complete, the HMI will upload the following command:
Rx: AA E4 4F 4B CC 33 C3 3C
Unless the user re-assemble the touch screen, the DWIN unique drift
compensation technology will ensure that the touch screen only needs one
calibration during product assemble, we guarantee that in the product life cycle
no calibration will be needed again !
Touch Screen: after the click of a button, once the user presses the touch
screen it will be displayed in the corresponding coordinates by a red solid circle
in order to facilitate the users to test touch screen accuracy. Click [Off] to
cancel the test.
3.3.3 Displaying Parameter Setting

There are three buttonsONOFFSet set the figure of the input box
and click the corresponding button to set DWIN UART UCM.
e.g.
Cursor Setting - open0xAA, 0x44, 0x01, 0x00, 0x00, 0x00, 0x00, 0x03, 0x0F,
0xCC, 0x33, 0xC3, 0x3C
Cursor Setting-close 0xAA, 0x44, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03, 0x0F,
0xCC, 0x33, 0xC3, 0x3C
Character Space 0xAA, 0x41, 0x00, 0x00, 0xCC, 0x33, 0xC3, 0x3
3.3.4 Picture Download
Picture downloading function will download all the pictures to DWIN UART
UCM, there are basic download and top-speed download.

Basic Downloadthe system will download according to serial port baud rate

Top-speed DownloadThe system will automatically switch to high-speed
baud rate (6.225 million) picture download.
High-speed downloading, the screen does not automatically refresh, only
when all the download is complete, then it will update the screen.
3.3.5 Font Download

Choose Font Click to select font, pop-up font file selection box, select the
font that you need to download
Delete Selected to delete lines in the listDelete allclear all items in the
list
Send send font file in the list in order to DWIN UART UCM. Issued a
document when the state changes are as follows:
Issued process tip: Please TX Text_Lib
Issued complete tip: One Text_Lib Save OK.
If there are more than one font, then the system will send the next one, repeat
the above prompt, specify to pop-up the following dialog box.

State prompt when
downloading
3.3.6 Configuration File Download

In the corresponding place, click to choose the configuration file to
send to DWIN UART UCM.
The corresponding file include:
Output Commands Configuration File0x1A
Keyboard Configuration File 0x1B
Automatic Cycle Commands 0x1C
Image Crop Control File 0x1D
Touch Control Configuration File 0x1E
Click on the corresponding input box to the right of the [Send] button to send
the configuration file.
3.3.7 Self-write Instruction

For purpose of letting clients to input HMI instructions conveniently, it provides
Downloading
Prompt
Input
Input
Here
Click number
button to send
Send
tools for clients to send instructions themselves.
Click , then the system will automatically
repeat sending selected instructions according to time [interval] in the
command list. As shown:

Click , then the system will automatically repeat
sending instructions according to time [interval] in the "instruction input
column". As shown:
3.3.8 Picture Cut
Cut pictures in the corresponding storing location based on the size range from
Top Left Cornerto Bottom Right Corner and display in the displaying
Display Position on the screen.
Corresponding Instruction
Tx: AA 71 <Pic_ID> <Xs> <Ys> <Xe> <Ye> <X> <Y> CC 33 C3 3C
orAA 9C <Pic_ID> <Xs> <Ys> <Xe> <Ye> <X> <Y> CC 33 C3 3C

Transparent Cut: 0x9C instruction does not display the background color of
the shear picture, it will put on "transparent" effect; before 0x9C instruction
executing, it will automatically restore the background;
CUT: 0x71 Instruction
3.3.9 Text Display
For testing the correctness of the font sent to DWIN UART
UCM

The fonts are divided into standard font and extended font.
Standard Font
Tx: AA <CMD> <X> <Y> <String> CC 33 C3 3C
Rx: no
<CMD>
0x53: 8 * 8 dot matrix ASCII string;
0x54: 16 * 16 dot matrix expansion of the Chinese Character string (ASCII
characters display as the half-width 8*16 dot matrix );
0x55: 32 * 32 dot matrix expansion of the Chinese Character string (ASCII
characters display as the half-width 16*32dot matrix );
0x6E: 12 * 12 dot matrix expansion of the Chinese Character string (ASCII
0x6F: 24 * 24 dot matrix expansion of the Chinese Character string (ASCII
The <X> <Y> show the start of the string (the first character in the upper-left
corner of coordinates)
Text Input Box
<String> is to display character string, and Chinese using GB2312 (0x55, 0x6F;
internal code) or GBK (0x54, 0x6E, Internal Code) encoding, displaying color is
set by the 0x40 instruction, displaying the character space is set by 0x41
instruction, the line will be changed automatically at the end. 0x0D, 0x0A be
processed as a "enter and line-change".
3.3.10 Extended character

Tx: AA 98 <X> <Y> <Lib_ID> <C_Mode> <C_dots> <Fcolor> <Bcolor>
<String> CC 33 C3 3C
Rx: no
<X> <Y> Display the first character of the upper-left corner indicators;
Font select Sequence Number, the range of 0x00-0x3B, corresponding to
the location of the 0xF2 instruction to save the font;
The HMI kernel has 32MB font memory, divided into fonts of 60 different size,
Lib_ID defined as follows:
Lib_ID Volume Instruction Factory Default
0x00-0x1
F
128KB 32 small fonts with 128KB at
most are normally used to
design special icon clients
needed or ASCII characters
with different typeface .

0x00=ASCII Fontdo
not modify
0x01Fonts use
Pinyin
0x020x19empty
0x1A-0x1Ftouch
configuration file
0x20-0x3
B
1MB 28 fonts with 1MBspace at
most
A single font can hold GBK
enlarged fonts under 16 lattice
0x2012 Lattice GBK
Sumsun
0x2116Lattice GBK
Sumsun
1212or1616 lattice or
GB2312 secondary font within
32 lattice12121616
24243232
Fonts can be used assembly,
a 28MB large lattice fount can
be assembled at most. When
fonts are used assembly,
Lib_ID of 0x98 or 0xF2 refers
to the address of the first
fount; for example, a 32 lattice
UNICODE font will take 8MB
space, we can give it space
Lib_ID=0x20-0x27, then the
next font start with 0x28, when
0x98 instruction is used for
displaying, Lib_ID0x20.
0x22 24Lattice
GB2312Sumsun
0x23 32Lattice
GB2312 Sumsun
0x240x3Bempty
Choose the code above, send characters to text box, click the [Send] button,
then send text to screen and display.
3.3.11 Dynamic Graphics
We can conduct the simple drawing on TFT displaying screen, some animated
effect need to go with DWIN UART UCM, so we can see the following
displaying function: Tips: do not switch the interface or do other operations
before animation display

Regional movement:
0x60 selected area move and shift to the right: from right to left, from the
left-most region moved to the far right.
0x61 selected area move and shift to the left: from left to right, from the
right-most region moved to the far left.
0x62 selected region shifted to the right: from right to left, the left-most region
lost , the right-most area filled with the background color (0x40 instruction).
0x63 selected region shifted to the left: from left to right, the right-most region
is lost, the left-most area filled with the background color (0x40 instruction set).
(Corresponding to the display mode)
Line and multi-deformation:
(a)Dynamic graph:

(b)Spectrogram

(c)Line Chart

DemonstrateClick the display button to show the corresponding curve in
DWIN UART UCM.
3.4 Operation Blogs
Records and the operation records of the serial ports communication, as
shown:

[Save] save operational records as a file for later viewing.
[Clear] to clear the data in the display area
Click on the arrow buttons on the top right , the operation log can be narrowed
down to the bottom of the screen, as shown:

Terminal Assistant v6 0 User Guide

Uploaded by

Copyright:

Available Formats

Terminal Assistant v6 0 User Guide

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Terminal Assistant v6 0 User Guide

Uploaded by

Copyright:

Available Formats

Professional Creditable and Successful Beijing DIWN Technology Co.

You might also like