7/29/2014 Manual

http://translate.googleusercontent.com/translate_f 1/48
Page 1
Intelligent lock management software manual
Page 1 of 55
Intelligent lock management software
Make
Use
Hand
Book
7/29/2014 Manual
http://translate.googleusercontent.com/translate_f 2/48
Page 2
Intelligent lock management software manual
Page 2 of 55
Eye Record
I. Overview
.................................................. .................................................. ........................... 3
Second, the entry operation
.................................................. .................................................. ............. 4
Third, the main interface
.................................................. .................................................. .................. 10
Fourth, the operation
.................................................. .................................................. ......................... 13
4.1 Fat guest card
.................................................. .................................................. ................. 13
4.2 continued to live write cards
.................................................. .................................................. ................. 13
4.3 Guests wards
.................................................. .................................................. ................. 14
4.4 guest room card replacement
.................................................. .................................................. ........ 15
4.5 Upon checking out
.................................................. .................................................. ................. 15
4.6 View card information
.................................................. .................................................. ........ 17
4.7 Issue Management Card
.................................................. .................................................. ........ 17
4.8 loss report card
.................................................. .................................................. ................. 31
4.9 Cancelled Card
.................................................. .................................................. ................. 32
4.10 reading open records
.................................................. .................................................. ...... 33
4.11 door room number set (system installation card)
.................................................. ............................ 34
4.12 Management parameter settings
.................................................. .................................................. ...... 35
4.13 booking management
.................................................. .................................................. ...... 38
Fifth, the query
.................................................. .................................................. ......................... 41
5.1 Query various cardholder records
.................................................. .................................................. 41
5.2 query logging
.................................................. .................................................. ......... 41
Six, tools
.................................................. .................................................. ......................... 43
6.1 modify the state
.................................................. .................................................. .................. 43
6.2 Public Information
.................................................. .................................................. .................. 43
6.3 Calendar
.................................................. .................................................. ....................... forty five
6.4 World Clock
.................................................. .................................................. .................. forty five
6.5 Calculator
.................................................. ........................................ wrong! Bookmark not defined.
Seven, the system
.................................................. .................................................. ......................... 46
7.1 Re-Login
.................................................. .................................................. .................. 46
7.2 Change Password
.................................................. .................................................. .................. 46
7.3 System Parameters
.................................................. .................................................. .................. 47
7.4 the operator to set
.................................................. .................................................. .............. 52
7.5 Database Maintenance
.................................................. .................................................. .............. 54
Page 3
Intelligent lock management software manual
I. Overview
Locks basic settings:
Locks installed prior to installing the card in use must be used to lock the system settings. Proceed as follows:
7/29/2014 Manual
http://translate.googleusercontent.com/translate_f 3/48
Page 3 of 55
1, with the installation of the card lock set number;
2, set the lock time clock card.
Note: The card is not installed on the existing lock system information settings, to set the lock again, first remove the card clean
In addition to door inside information.
Card use and management:
l emergency door card: You can open all doors, including locked. After use, the door is always open state. This card is generally
No, only in special cases when using this card.
l total control door card: You can open all the locks can be opened even when locked. General by the hotel general manager, rooms
Hold managers and other department managers, total card loss reporting function, if the loss occurs, should be used to report the loss of function of the total replacement
Card and use it to open all the locks again, so that the original function of the total card to open the door to fail, for recovery has been
Open the door to report the loss of function of the total cards in the system just re-do a total card.
l BAN door card: open all the doors of a building, and can not be locked open. Such as: Hotel *** \ *** Building. General
Held by the hotel management staff.
l floor door card: On a certain floor area of a building all doors. Such as: Hotel *** \ *** Building \ *** floor.
l channel door card: Specify the door open, with alternating open function (touch once opened, taking even one off), generally with
In conference rooms or other special occasions.
l Clock Card: used to calibrate and set the internal clock in each room door.
l Clear Card: Clear lock information, so lock back to the initial state.
l Area open card: You can open the door locks designated Area, this card does not affect the door open for other types of cards
Normal function.
l Area Set Card: Setting Area No. locks within the designated area, setting locks Area number, if you want to open the door Area
Valid card to open the door, you need to issue the corresponding number of Area Area open card.
l blockade card: for closing unused room, the room during the blockade, in addition to all of the emergency card outside the door can not open
Gate.
l unlock the card: the card is used to unblock blocked the door.
l password to open the door card: to set a password to open the corresponding door.
Page 4
Intelligent lock management software manual
l Set the password card: used to set the password lock, password, open the card door must find additional success in the lock
Open the door to the corresponding password to complete the action, this password is the password set by the password card set.
l Password Clear Card: used to clear the lock corresponding password, this feature is mainly a password to open the door to report the loss of the door card
Function, remove the password recovery password key card to open the door For function can reset the password and re-do a password
Door card.
The current version of a door lock system which can store 16 groups of passwords, use a password to open the door to complete the cross-functional
Open the door function.
l Check the hour set Card: Guests check-out time for defining a card. If set to 12:00, then at twelve
Later, the guests will not be able to open the door of the door card. This card is just to set a unified check-out time for the hotel interior,
Generally can not be used for any reason terminate the door away feature guest card, so the operation will have a direct impact on subsequent
Guests door open question check card, this card is set with the generally fixed function. To return to the original
7/29/2014 Manual
http://translate.googleusercontent.com/translate_f 4/48
Page 4 of 55
Check settings must be written before the hour set card settings again.
Note:
1, issue cards if you lose, you should report the loss of the same type issued a card, and it can use this card to open
Open all the locks on the door once, the previous valid card loss.
2, in the course frequently back up your data, the database is damaged, you can use this backup to restore.
Second, the entry operation
Click the shortcut icon on your desktop Into the system management software, began login system software,
The default system operator first use of Admin, the user's password is 12345, is generally recommended user login system
After the increase the system administrator and other operators, then the system administrator or other operator into the system, login
Window interface as shown below:
Page 5
Intelligent lock management software manual
In Password, enter: 12345, then press the [Login] button to enter the system, lock system for the first time to begin licensing Note
Register operation, the registration please enter the authorization code, and will authorize the card on the reader, as no authorization code or license key has expired
Period, after an optional registration option on valid registration code in order to get the correct information through the code as shown below:
Press the OK button to start the registration and initialization lock software, the system will automatically find the communication port is available, the user does not have to choose
Optional communications port number to complete the communication with the reader.
If you choose the later registration entries, press OK to start reading authorization card
Authorization information to the system database, the system will automatically exit after a successful, users need to re-run the system, re-run after
The system will display the registration code based on the information window, as shown below:
7/29/2014 Manual
http://translate.googleusercontent.com/translate_f 5/48
Page 5 of 55
At this point the information will lock code advertised software vendor to get the correct valid license key locks, after proper authorization to enter the system
Systems. The system will display the system's main function interface diagram, as shown below:
Page 6
Intelligent lock management software manual
Another system is the main interface style: (set in the system parameter settings)
7/29/2014 Manual
http://translate.googleusercontent.com/translate_f 6/48
Page 6 of 55
Users in the menu [System] -> [System parameters] key to set the new room number information.
Usually after the first operation of the system need to confirm the new
The room number information, confirm the new information and the corresponding operator permissions feature, all basic parameters can begin business operations
For, with the number of new homes operational data interface is shown below (room number information here as examples):
Page 7
Intelligent lock management software manual
guest registration
Assuming guests LEI Xiao-ping registered to 206.206 is the standard single, the maximum you can send a card to open the door.
Click the shortcut button "send guests Card" window appears issuers, direct input guest information, pre-live for a few days and the number of issuers.
7/29/2014 Manual
http://translate.googleusercontent.com/translate_f 7/48
Page 7 of 55
Click the "hairpin" button, after issuing a successful room status change, because it is only made a single card, so stay a
After the guests and issuing, room status is displayed as full house.
Guests wards
If you want to change to 207 guests, please select the interface 207, and then click on the menu "Operation" "wards Operation", the
Page 8
Intelligent lock management software manual
Page 8 of 55
Now the following window:
Guests of the original door onto the card reader, click on the "Reader" button, the previous guest registration information. Set up
Fixed number of nights, click on the "wards" button, the success of wards.
Guests continued to live
Guests want to continue to live, they can simply click the shortcut button "continued to live to write cards" continued to live operation window appears:
7/29/2014 Manual
http://translate.googleusercontent.com/translate_f 8/48
Page 9
Intelligent lock management software manual
Page 9 of 55
Guests will be placed on the card reader, click on the "Reader" button to display the number of days after arrival information, enter continued to live,
Click on "continue to live" button, guests continued to live completed.
guests check
Guests should check out when you can just click the shortcut button "Check writing cards, check out the operation window appears:
Guests will be placed on the card reader, click on the "Reader" button to display the arrival information, click on "check out" button,
Check out successfully, room status becomes empty net room. Check out the room status is set to "System", "System Parameters".
Page 10
Intelligent lock management software manual
Third, the main interface
Below lock management software main interface consists of a menu bar, floor area, statistical area, room number room status area, shortcut button operation
7/29/2014 Manual
http://translate.googleusercontent.com/translate_f 9/48
Page 10 of 55
Workspace, room information display area and status zone. Operating area in which the shortcut buttons to commonly used features include front desk, Jane
Of the steps, but to save time.
Menu area shows all system functions to achieve the entrance, users simply move the mouse and click on the menu item corresponding to the function
Window into the function realization.
To facilitate the search bar operator search criteria suitable room, pull-down menu has a name and room number, room features, you can achieve
Fuzzy queries, quickly and conveniently.
Floor area is located in the upper left corner of the main interface of business, and its main function is to house state disk positioned floor number display area conditions, such as
All items will be positioned to select all of the floor conditions, this window when the tree node supports multi-storied building of display, it automatically points
Analysis of the availability of multi-storied building systems, such as only one name only displayed on each floor, and its function interface is shown below:
Shortcut button area
Room number room status area
The menu bar
Floor area
Room Information Zone
Statistical Area
Class of Housing
Page 11
Intelligent lock management software manual
Statistical area mainly to complete the number of the room number for each room occupied states in the system, but also the room status area displays the room number of room status name
7/29/2014 Manual
http://translate.googleusercontent.com/translate_f 10/48
Page 11 of 55
Said conditions, choose a different name in the room state room status area displays the corresponding room number corresponding room status under the current floor.
Style one This area is the main interface contains a [quick] information page item, this is mainly characterized by the search for a room number and displayed in the room state area
In; style two search terms to achieve this function shortcut button, its function window interface as shown below:
Housing state name as follows:
l empty net room: is not issuing a clean room status display;
l Maintenance room: is the room in maintenance status;
l booked: illustrate the guest book this room.
l under house: is one that can send more than one room card did not finished the cards have been less than the maximum number of hairpin hairpin
Number.
l Full House: refers to all current card ran out the room number, can no longer be issuing operation, already equal to the number of issuers
A large number of issuers.
l empty dirty room: refers to the current room is empty dirty room.
l Other rooms: refers to the current room to another room. Settings can not be room for other state issuing operating room.
Room type bar area is also the room number for the room status display provides room type conditions included in this display of all entries
If you choose all the places all room types to room status area displays the room number conditions, the function of the window as shown below:
Page 12
Intelligent lock management software manual
Housing state area is the main function room number display area throughout the user interface, the room number display conditions in this area by the floor area, room status statistics
Area, room type of display room to work together to determine the number.
The tray will follow the mouse over the display room, it is the current room number attribute data in real time, and depending on the room status
Display different types of content. If no card room at the same time will show the maximum number of issuers.
7/29/2014 Manual
http://translate.googleusercontent.com/translate_f 11/48
Page 12 of 55
If there are guests in the living, will guest information, card number and check-in time and end time display.
The status area shows the current system, the operator name currently logged in, occupancy rates, power door locks and service type
Session information.
Page 13
Intelligent lock management software manual
Fourth, the operation
4.1 Fat guest card
Select issuing room click on the "send guest card" button, enter the guest registration information (or select "Menu"
"Release the door room card"), issued the guests open the door cards.
Check the exact number of days to a maximum of 63 days only, more than 63 days will only be
Monthly basis, the biggest month for the 15 months, more than 15 months on an annual basis only.
Issuing number is entered manually, if the whole room does not have the card sent to (a room can send two cards, the actual
Only made one), room status displays as unearned room; If the cards are sent out, room status is displayed as full house.
Click the "hairpin" button, you sure you want issuer, the pop-up boxes:
7/29/2014 Manual
http://translate.googleusercontent.com/translate_f 12/48
Page 13 of 55
Click "OK", indicating the success of the issuing operations.
4.2 continued to live write cards
Guests continued to live, click on the "write cards continued to live" button, or menu "Operation" "guests continued to live to write cards" will be out
Now the following window:
Page 14
Intelligent lock management software manual
The guest card on the reader, click on the "reader", a guest information card memory, select the number of days you want to continue to live,
Click on "continue to live" button, guests continued to live successfully.
4.3 Guests wards
For guests wards, check first with the left mouse button to move into a new room in the main panel, click on the menu "Operation" "off
Wards people write cards ", the new room is displayed in the lower left new rooms list; put the card on the card reader, click on the" reader "guest.
Personal information is displayed, the old rooms in the upper left old room list, click on the "wards" button. Guests asked whether the system
Card, click on the "Yes" button.
7/29/2014 Manual
http://translate.googleusercontent.com/translate_f 13/48
Page 14 of 55
Page 15
Intelligent lock management software manual
Page 15 of 55
4.4 guest room card replacement
If the guest card is lost or damaged cards may be reissued this room room card operation. First with the left mouse button on the main panel
To open the card replacement is selected in room number, click on the menu "Operation" "guest room card replacement," pop operation room card replacement
As a window, as shown below; put a new card on the card reader, click on the "up card" button. Asked whether replacement passenger
One card, click on the "Yes" button.
4.5 Upon checking out
Upon checking out the card divided into two kinds of check-out and check-out no cards.
There are cards out:
Click on "Check writing cards," or select the menu "Operation" "card check out guests" will open the card into the reader guests
Click the "reader" on the device, guest information is displayed, click on "check out."
7/29/2014 Manual
http://translate.googleusercontent.com/translate_f 14/48
Page 16
Intelligent lock management software manual
Page 16 of 55
No card out:
If the guest card is lost, select the menu "Operation" "no card check out guests", click on "Search", the query to
Check out the room, click on "check out."
After checking out, room status reverts to non-card room.
Note: Check out the room status is set to "System" "System Parameters".
In the "Operation" "Management Parameters Settings" checked "on departure back to make multi-card", you must put all the passengers at the check-out
Check out who opened the door card reader operation to completely check out.
Page 17
Intelligent lock management software manual
4.6 View card information
Select the menu "Operation" "View card information", this feature can view the system all the card information.
7/29/2014 Manual
http://translate.googleusercontent.com/translate_f 15/48
Page 17 of 55
Function: View the system information of all types of data card issued.
4.7 Issue Management Card
Select the menu "Operation" -> "Release Management Card" and select the function cards for issuing management.
Note: If the course locks within the validity period of the card is lost, you must report the loss of one of the same type of card issuance
Tablets, and use this card to the original card to open the locked each time the door opened. The card features the previous report the loss.
Time Master Control door cards generally set relatively long, if by month, the longest only 15 months, more than 15 months on
Only in years. Generally held by the general manager or person in charge.
Function: can open all the locks in the system authorized to open locked
Page 18
Intelligent lock management software manual
7/29/2014 Manual
http://translate.googleusercontent.com/translate_f 16/48
Page 18 of 55
Issue floor door card, select the card-issuing the floor, the card can open the floor to all the locks. Set the name of the holder
Words and the number of days, click on the "issue of the card."
Function: used to open all the locks of a floor, but can not open locked.
Page 19
Intelligent lock management software manual
7/29/2014 Manual
http://translate.googleusercontent.com/translate_f 17/48
Page 19 of 55
Issue emergency door card, enter the name of the holder, no time can be open. Click the "issue cards." Emergency card
To open the locked, you can open the blocked door. If you lose, you need to issue an emergency code to set the card to report the loss, and then send
Line a new emergency card.
Features: Open door in case of emergency, including locked and blocked the door, and the door is so long open state. Urgent
After the situation, taking even just one other type of door cards, door locks that restore the original state.
Page 20
Intelligent lock management software manual
7/29/2014 Manual
http://translate.googleusercontent.com/translate_f 18/48
Page 20 of 55
Issue Area open card, you need to set the card issue patches. Parameter setting set in the management of names and corresponding chip card
Room numbers displayed in this window. Select Area to set the card to open the door of room number corresponds Area name. Setting time, wherein
Time to open the door with the provisions of the master control card is the same. But one can only keep a door open Area Code, such as 206 written
Area 1 of the door card, and other patches can no longer open the door card room.
Function: Used to open all the locks set a Area. Area refers to a certain room BAN certain floors.
Page 21
Intelligent lock management software manual
Issue a password to open the door card, you need to set a password card set issued in the name of the password management parameters set and the corresponding room
Between numbers displayed in this window. Select the card you need to set a password to open the door of room number corresponding password name.
Set the time, wherein when
With the provisions of the master control room door card is the same. The maximum number of hours to accurately also 63 hours.
Each door can save 16 groups of passwords that can set a password to open the door more than one card to open a door, open the door to achieve cross.
For example, you can set a password to open the door card name Password 1 207 locks can be opened, you can also set a password for the secret name
2's password can also open the door cards 207 locks.
Function: used to open the door to set a password. If you can set a password lock suites, just send a card can be opened
Kai kit all doors.
7/29/2014 Manual
http://translate.googleusercontent.com/translate_f 19/48
Page 21 of 55
Page 22
Intelligent lock management software manual
The first 22 of 55
Issue passage door cards, choose to locate the room, showing the door to the issue of access cards enter the room number in the content, click
"Release the card."
Functions: the function of alternating open
7/29/2014 Manual
http://translate.googleusercontent.com/translate_f 20/48
Page 23
Intelligent lock management software manual
Page 23 of 55
Issue clock cards, and software after installing locks, you first need to install the card is issued, then need to check with a clock card locks
Internal time. When school time is generally very accurate, do not tamper with. Click the "issue cards."
Function: used to calibrate and set the internal clock in each room door.
Issue clear card holder name entered click on the "issue of the card," Clear card to clear all information in the locks. Clear letter
Interest rates need to re-lock the system after installing the card, re-calibration when.
Function: Clear all the information inside the door.
Page 24
Intelligent lock management software manual
7/29/2014 Manual
http://translate.googleusercontent.com/translate_f 21/48
Page 24 of 55
Issue Area Settings tab, select Area name, click on the "issue of the card." Use this card to the appropriate Area All rooms touch
A lock to unlock the door card with patches. After setting the card must be issued patches, and touch all the locks of the film area,
Area issued card to open the door.
Page 25
Intelligent lock management software manual
7/29/2014 Manual
http://translate.googleusercontent.com/translate_f 22/48
Page 25 of 55
Reset card issuance, enter the cardholder's name, click on "issue cards."
Function: If the situation occurs time backwards, hitting a door with a card can be properly reset switch. If the door cards issued
When the time Misadjusting for the future at a time, can not open the door, this time with a touch reset the card locks, re-issued
Guests line card to open the door.
Page 26
Intelligent lock management software manual
7/29/2014 Manual
http://translate.googleusercontent.com/translate_f 23/48
Page 26 of 55
Blocked cards issued, if the room is not a long time, can block with a blocked card. Enter the cardholder's name, click on the "issue
Card. "
Function: for closing unused room, the room during the blockade, in addition to all of the emergency card outside the door card can not open the door.
Note: Blocked emergency card can only be used to open the door, in order to unlock, you can issue a card to unlock, unlock the door lock
Back to normal, you can open the door with a set of cards. Unlock the card blocked card operation with the same issue.
Page 27
Intelligent lock management software manual
7/29/2014 Manual
http://translate.googleusercontent.com/translate_f 24/48
Page 27 of 55
Unlock the card issue, if you have blocked the use of the room needs to be restored, you can re-opened by unlocking card. Enter the cardholder's name,
Click the "issue cards."
Features: Room for releasing blocked, unlock, lock back to normal, you can open the door with a set of cards. Unlock
Card issuing cards with the same operation blockade.
Page 28
Intelligent lock management software manual
Password Clear card, if you want to cancel the password lock password is set, you need to issue a password to clear the card, the operating steps
The same procedure with the issue of password to open the door cards. Use this card to the touch on the need to clear the password door look, you can.
Function: Clear all passwords write locks
7/29/2014 Manual
http://translate.googleusercontent.com/translate_f 25/48
Page 28 of 55
Page 29
Intelligent lock management software manual
Page 29 of 55
Password Settings tab, select the name of the password, click on the "issue of the card." Touch a door to the appropriate use of the card all rooms
You can use a password to unlock the door. You must set a password issue cards, to name the corresponding password to touch a door to all rooms. Table
Shows these locks set the password, the password can be effectively open the door cards.
7/29/2014 Manual
http://translate.googleusercontent.com/translate_f 26/48
Page 30
Intelligent lock management software manual
Page 30 of 55
Emergency code setting card, enter the name of the holder, simply click the "issue of the card." When the card is lost when the emergency needs
To issue an emergency number to report the loss of the original card set emergency card, to touch on all the locks once, and then reissue a contingency
Card.
Check-hour set card, enter the cardholder's name and check out the hour, simply click the "issue cards." The card with the need to set
Given the lock-out time of touch, that effect.
Function: Set the room check-out time, if more than the set time, guests door cards issued is invalid and can not be
Open the door.
Page 31
Intelligent lock management software manual
7/29/2014 Manual
http://translate.googleusercontent.com/translate_f 27/48
The first 31 of 55
4.8 loss report card
Select to view different types of cards card holder, the card you want to locate a guest room, you can click on the "Search"
Button, enter the number you want to check the room, you can pinpoint the room to check the corresponding card information, after selected, put a new
Card in the reader, click on the "loss report" button, with touch a written loss report card on the corresponding door, the original card void.
Then reissue a new card to open the door.
For door card loss method before reporting the loss of the management class with the same type of management classes once the door card loss, all the same
Class cards are reporting the loss, not the loss of the card must be recovered for re-issuing, we can restore the original function.
Management operating loss report card must have administrator-level privileges to proceed.
Note: If more than one room, made a guest card, which one is lost, it is necessary that the room cards are issued to all guests
Loss, and then re-issuing.
Page 32
Intelligent lock management software manual
7/29/2014 Manual
http://translate.googleusercontent.com/translate_f 28/48
Page 32 of 55
4.9 Cancelled Card
If you need to cancel the card feature, first put on the card reader, click on the "Reader" button, the "cancel" button
Active, click the "Logout", canceled the card. All cards are issued by the system can log in here.
Note: In this guest card canceled, the software interface room status does not change.
Page 33
Intelligent lock management software manual
7/29/2014 Manual
http://translate.googleusercontent.com/translate_f 29/48
Page 33 of 55
4.10 reading open records
To see a door open records, click on the "Operation" "Read open records."
Wherein the device before the general election, "collection instrument (LC-HI008)", the first collection instrument used to collect locks need to see the records
Record, and then linked up with the PC, click on the "Read" button to display all the information.
Page 34
Intelligent lock management software manual
4.11 door room number set (system installation card)
System installation card locks are installed, you need to install the card making each room, room number in accordance with the order set to install.
Then the issue of a clock card, preferably within five minutes once the door hit all the time to verify the accuracy internal locks. After
Over time lock system time clock time possible and inconsistent, and the door was open. So when the clock card to regularly check
Room.
7/29/2014 Manual
http://translate.googleusercontent.com/translate_f 30/48
Page 34 of 55
Note: The card is not installed on the existing lock system information settings, to set the lock again, first remove the card clean
In addition to door inside information.
Page 35
Intelligent lock management software manual
Public doors:
If a door is set a floor common doors, the floor is open to all guests of the card can open this door.
If a door is set to a common door BAN, BAN all floors of the cards can be open to all guests of this
Gate.
Door not closed alarm:
Start alarm if the door is not closed, it will beep.
Floor Card prohibited guest card (Temic card lock only valid):
If you use the card in a row to open three doors floor, so guests can no longer open this door card door. To open the card to open the door with the guests,
Guests must re-send a card to open the door.
12:00 () / the whole point () Check (only valid for Temic card lock):
If elected, said this is the time to check out the guest card of the day at the check-out 12-point, 12-point invalid after the door; If no election
, Said on the day of departure time (time) is the time (when) the issuing time. Check-hour part-time priority setting card settings.
Door drive to strengthen (Temic card lock only valid):
Check this new lock is not recommended. If the lock function of aging, not smooth when you open the door, check this can be resolved. But
Drive to strengthen the power consumption will increase.
4.12 Management parameter settings
7/29/2014 Manual
http://translate.googleusercontent.com/translate_f 31/48
Page 35 of 55
Select the menu "Operation" -> "Manage Preferences" and select Lock relevant parameters, select a card issued by the management class
Type, click "Save" to complete the set of operating parameters.
l precise positioning Card ID: refers to the reader when the computer automatically search for the card ID, this will directly affect the system
Issuing system speed, generally do not need to select this option, unless the system needs to be considered when maintenance is enabled.
l disabled by default when the old door card key card to open the door to issue new rights: namely, the issue of the new door cards, old cards will open the door
Automatically lapse.
l Check back do you need multiple card: the double, triple made two or three cards, you must check all
Page 36
Intelligent lock management software manual
The cards are back, before they can be displayed as no card room.
l theme frame style: the main interface of two different styles. (There are introduced in the entry operation)
Function Area name Description:
For cards issued Area open (ie for convenience, set a few special storied building, some rooms a few floors of
A Area) Area settings must first issue a card, the card needs to be added to set Area Area Area name names in the settings, choose
Select and add the card to open the door to set Area room number, click on "Settings."
7/29/2014 Manual
http://translate.googleusercontent.com/translate_f 32/48
Page 36 of 55
Page 37
Intelligent lock management software manual
Page 37 of 55
Function code name description:
For the issue of passwords to open the door cards, first issued a password set card, the card needs to set a password in the password settings name Tim
Add a password name, select and add the card to set a password room number, click on "Settings."
Page 38
Intelligent lock management software manual
7/29/2014 Manual
http://translate.googleusercontent.com/translate_f 33/48
The first 38 of 55
4.13 booking management
Click the "Operation" "Guest Book Management", a guest book management window:
You can add, modify, delete, query guests book a room situation.
Operation:
1, the new : Choose the right room number, fill out guest information, setting the scheduled time. The default is two days later.
Page 39
Intelligent lock management software manual
7/29/2014 Manual
http://translate.googleusercontent.com/translate_f 34/48
Page 39 of 55
2,
Modification : Guests choose to modify data, or you can click In accordance with the pull-down menu
Category query, and then modify and save.
Page 40
Intelligent lock management software manual
3, delete : Cancellation fee guests can click , Delete dialog box appears, click "Yes"
Cancellation fee.
4, click
: View current booking guests, guests and cancellation history book guests.
7/29/2014 Manual
http://translate.googleusercontent.com/translate_f 35/48
Page 40 of 55
Has come to the scheduled date of the booking room, double-click the main interface booked a room, the following message box will appear, if
Click "Yes", then there scheduled guest information, click on the "Card" button, convenient; If the scheduled guests
At the scheduled time yet to come, you can click "No", the issuing window appears, enter the New guest information, click on the "hairpin"
Can.
Note: book a room one day, room status is scheduled to appear before the guests arrive at the house.
Page 41
Intelligent lock management software manual
Fifth, the query
5.1 Query various cardholder records
"Query" menu to view a variety of operating records to facilitate the management staff. Guests card records, records guests back card
And so on, every step of the operation will produce records can be exported to a spreadsheet, you can print.
Guests card records, used to query detailed information during operations issued to all guests of the card.
7/29/2014 Manual
http://translate.googleusercontent.com/translate_f 36/48
The first 41 of 55
5.2 query logging
Log Viewer, used to query the operating records of the occurrence of the work process, select [query] -> [Operation Logging];
Page 42
Intelligent lock management software manual
Click on the menu "File", "Filter View Log", you can query a certain period of time, work logs.
7/29/2014 Manual
http://translate.googleusercontent.com/translate_f 37/48
Page 42 of 55
Page 43
Intelligent lock management software manual
Six, tools
6.1 modify the state
Click on "Tools", "modify the state", the pop-up window to modify the room issuing state, select the state you want to modify, click the "repair
Change "button, forcing the state to modify the room. Room status in real time reactions on the main interface.
6.2 Public Information
Click on "Tools", "public information", you can check the unit information, telephone exchanges, tourist spots, flight schedules and so on.
7/29/2014 Manual
http://translate.googleusercontent.com/translate_f 38/48
Page 43 of 55
Page 44
Intelligent lock management software manual
Page 44 of 55
Click the "Edit" button to pop up the public information category editing window, you can edit the contents click "Add" to add categories; Point
Click "Edit" to modify the modified category; clicking "Delete" to delete the selected category.
Click the "View" button, you can view information stored in each category. Click "Add" to add records, then "Paul
Deposit ", or click" Delete "to delete the selected record.
Page 45
Intelligent lock management software manual
7/29/2014 Manual
http://translate.googleusercontent.com/translate_f 39/48
Page 45 of 55
6.3 Calendar
Click on "Tools", "calendar" convenience check date.
6.4 World Clock
"Tools," "World Clock" easy access around the time of the query.
Page 46
Intelligent lock management software manual
7/29/2014 Manual
http://translate.googleusercontent.com/translate_f 40/48
Page 46 of 55
Seven, the system
7.1 Re-Login
Click the "System", "re-login" pop-up login window, switch user name, enter the password to log in again.
7.2 Change Password
The default system administrator password can not be modified, must be added to the system administrator or user can re-set
Page 47
Intelligent lock management software manual
Modify their own passwords.
Click the "System", "Change Password" window appears to modify the login password, enter the account number of the original password, and new password,
Confirming a new password to modify the account password.
7/29/2014 Manual
http://translate.googleusercontent.com/translate_f 41/48
Page 47 of 55
7.3 System Parameters
click on the menu option "System" "System Parameters", select "Set BAN floor."
Select "Add" to increase BAN floor, you can add bulk.
Page 48
Intelligent lock management software manual
BAN: The entire building name, hotels, Building, hotel second floor as
Choose to modify the storied building floor "Edit" on the floor to be modified to add the BAN; choose to delete the floor be
Operation.
7/29/2014 Manual
http://translate.googleusercontent.com/translate_f 42/48
Page 48 of 55
The room has been set up on the floor, please carefully BAN modify and delete.
Operation:
1, "BAN name" that a building's name. "BAN" and that is the same name BAN, BAN different, such as a half floor -1,
Half floor -2. You can achieve a one-time addition.
2, the "floor name," name is added to the floor, the floor is the same range with the range of BAN.
Page 49
Intelligent lock management software manual
click on the menu option "System" "System Parameters", select "Set room number"
Click the "Edit" button, the following window appears. You can add, modify, delete, and have set up a variety of room types
Price.
7/29/2014 Manual
http://translate.googleusercontent.com/translate_f 43/48
Page 49 of 55
Click "Add" to add BAN corresponding floor room, you can choose to add the room number range, the operation more simple,
Fill out the relevant information, click on "Add", added successfully.
Page 50
Intelligent lock management software manual
Operation:
1, choose which floor storied building which give added room, "room number Name" can follow the default format, also according to the actual
Modifications.
2, "room number" and you can add multiple rooms. Price, card number and room to add their own features. "Housing
No digital filter "that selectively add room number, can enter up to three digits, enter the number, the back will be a
A prompt box, you can select the location of the digital filter.
Select the room you want to modify, for information to be modified. When you modify the name can not be changed BAN floors, rooms can be modified only
Inter-related information.
Select the room you want to delete and click "Delete" button, a dialog box appears, click "Yes" to confirm the deletion of the room.
After adding a good room click "Exit", will appear as the room number of hard backup prompt box, or click on "Hard Backup" button
The following dialog box appears. Hard coming back up backup information to the reader in the room number.
7/29/2014 Manual
http://translate.googleusercontent.com/translate_f 44/48
Page 50 of 55
Page 51
Intelligent lock management software manual
Page 51 of 55
What happens if the software data loss problem, you can reinstall the software, and then install the backup data stored with the reader,
Click hard recovery, you can restore to a backup before the reader had room number information.
click on the menu option "System" "System Parameters", select "room status chart customization", in accordance with personal favorite style into
Line settings will be displayed in the main page. Room Status Display Pictures can click "Browse" button to upload their own settings, "OK
Given changes "to save the settings of all parameters. Parameters of the system if you want to restore the original settings, you can click on the" Restore Default. "
click on the menu option "Settings" "System Parameters", select "Guest Documents" can be increased in accordance with the actual situation
Deleted. Guests check-in, appears in the "Document Name" drop-down menu with a variety of easy registration certificates,
The operator makes the operation more convenient.
Page 52
7/29/2014 Manual
http://translate.googleusercontent.com/translate_f 45/48
Intelligent lock management software manual
Page 52 of 55
7.4 the operator to set
Click on the menu "System" "System Operator Settings", set a total system administrator has all privileges,
Other modules in accordance with the actual situation of administrators to assign permissions to save permission.
Page 53
Intelligent lock management software manual
Permissions are divided into menus and Permissions permission, menu functions that the operator can operate which menu; Permissions that the operator
What kind of card can be issued.
7/29/2014 Manual
http://translate.googleusercontent.com/translate_f 46/48
Page 53 of 55
Operation:
Click on "Manage (add, modify, delete)" button, the operator edit window, edit the name of the job number and other information
Click "Add" to add the operator; choose a operator be modified or deleted.
Page 54
Intelligent lock management software manual
7/29/2014 Manual
http://translate.googleusercontent.com/translate_f 47/48
Page 54 of 55
Note that the password can not be modified by someone else, only after the main interface login administrator can modify their own passwords. Explorer
Authorized administrator can view a module, any menu in any part, but the module is limited administrator privileges, you can not
Change system parameters, you can not set the system parameters, we can not operate on the database. Permissions can be accurate to each specific
Steps, such as add delete modify.
7.5 Database Maintenance
Menu "System", "database maintenance" is a system database backup, recovery and data reset. To avoid
Data loss, system database corruption, computer viruses and other causes is not available, the system provides to the user data backup
/ Restore functions, which contains a backup of all the data so far.
Page 55
Intelligent lock management software manual
Note: Due to recovery, specificity backup features, easy to make some people take advantage of this feature man cheating, please Systems Management
Members often to see if there is recovery, backup operation details, please review the operation if the reason.
7/29/2014 Manual
http://translate.googleusercontent.com/translate_f 48/48
Page 55 of 55