PSR 550

SERVICE MANUAL
I CONTENTS
SPECIFICATIONS.............................................................................. 3
PANEL LAYOUT ................................................................................. 4
CIRCUIT BOARD LAYOUT & WIRING .............................................. 6
BLOCK DIAGRAM ............................................................................. 8
DISASSEMBLY PROCEDURE .......................................................... 9
LSI PIN DESCRIPTION ................................................................... 13
IC BLOCK DIAGRAM....................................................................... 18
CIRCUIT BOARDS .......................................................................... 19
TEST PROGRAM ............................................................................ 28
DATA BACKUP & INITIALIZATION .................................................. 32
ALERT MESSAGE LIST .................................................................. 33
MIDI IMPLEMENTATION CHART .................................................... 35
OVERALL CIRCUIT DIAGRAM
PARTS LIST This document is printed on chlorine free (ECF) paper with soy ink.
1.412K-667 Printed in Japan 01.05
PK 001654
PSR-550
2
IMPORTANT NOTICE
This manual has been provided for the use of authorized Yamaha Retailers and their service personnel. It has been assumed
that basic service procedures inherent to the industry, and more specifically Yamaha Products, are already known and
understood by the users, and have therefore not been restated.
WARNING : Failure to follow appropriate service and safety procedures when servicing this product may result in
personal injury, destruction of expensive components and failure of the product to perform as
specified. For these reasons, we advise all Yamaha product owners that all service required should
be performed by an authorized Yamaha Retailer or the appointed service representative.
IMPORTANT : This presentation or sale of this manual to any individual or firm does not constitute authoriza-tion,
certification, recognition of any applicable technical capabilities, or establish a principal-agent
relationship of any form.
The data provided is believed to be accurate and applicable to the unit (s) indicated on the cover. The research engineering,
and service departments of Yamaha are continually striving to improve Yamaha products. Modifications are, therefor, inevitable
and changes in specification are subject to change without notice or obligation to retrofit. Should any discrepancy appear to
exist, please contact the distributors Service Division.
WARNING : Static discharges can destroy expensive components. Discharge any static electricity your body
may have accumulated by grounding yourself to the ground bus in the unit (heavy gauge black wires
connect to this bus).
IMPORTANT : Turn the unit OFF during disassembly and parts replacement. Recheck all work before you apply
power to the unit.
WARNING : CHEMICAL CONTENT NOTICE !
The solder used in the production of this product contains LEAD. In addition, other electrical/electronic and/or plastic
(where applicable) components may also contain traces of chemicals found by the California Health and Welfare Agency
(and possibly other entities) to cause cancer and/or birth defects or other reproductive harm.
DO NOT PLACE SOLDER, ELECTRICAL/ELECTRONIC OR PLASTIC COMPONENTS IN YOUR MOUTH FOR ANY
REASON WHAT SO EVER!
Avoid prolonged, unprotected contact between solder and your skin! When soldering, do not inhale solder fumes or expose
eyes to solder/flux vapor!
If you come in contact with solder or components located inside the enclosure of this product, wash your hands before
handling food.
I WARNING
Components having special characteristics are marked Z and must be replaced with parts having specification equal to
those originally installed.
PSR-550
3
I SPECIFICATIONS
Keyboards
61 standard-size keys (C1 C6) with
touch response.
Display
Large multi-function LCD display
Setup
STANDBY/ON
Master Volume : MIN MAX
Demo
9 Songs
Realtime Controls
Pitch Bend wheel
Control & Number Buttons
SONG
STYLE
MUSIC DATABASE
VOICE L
VOICE R1
VOICE R2
VOICE CHANGE
MIXER
NEXT/BACK
DIRECT ACCESS
EXIT
Data dial, [1] [0], [+/YES], [-/NO]
Overall Controls
Tempo : 32 280
Transpose
Voice
219 Panel Voices +14 Drum Kits + 480
XG Voices
Polyphony : 32
Voice Set
R1/R2/L Voices
Part on/off (R1/R2/L)
Voice Change : Voice number
Mixer : Volume, Octave, Pan, Reverb
Depth, Chorus Depth, DSP Depth
Auto Accompaniment
112 Styles
Accompaniment Track : RHYTHM SUB/
MAIN, BASS, CHORD
1/2, PAD, PHRASE1/2
Accompaniment Track Settings : ON/OFF
Accompaniment Control : ACMP ON/OFF,
SYNC START, SYNC STOP, START/STOP,
INTRO, MAIN A/B (AUTO FILL), ENDING/
rit
Beat Indicator
Accompaniment Volume
Voice Change : Voice number
Mixer : Volume, Pan, Reverb depth,
Chorus depth, DSP depth
One Touch Setting
Fingering Mode : Multi Finger/Single Fin-
ger/Fingered 1/ Fingered 2/Full Keyboard
Music Database
220
Multi Pads
40 Multi Pad Banks
4 Pads + STOP
Chord Match
Naming
Amplifiers
6W + 6W (when using PA-6 power
adaptor)
4.5W + 4.5W (when using batteries)
Speakers
12 cm (4-3/4") x 2, 3 cm (1-3/16") x 2
Power Consumption
22W (when using PA-6 power adaptor)
Power Supply
Adaptor : Yamaha PA-6 AC power
adaptor
Rated Voltage DC 10-12V
Rated Current 2A
Batteries : Six D size, R20P (LR20) or
equivalent batteries
Dimensions (W x D x H)
952 x 387 x 169 (mm)
(37-1/2" x 15-1/4" x 6-5/8")
Weight
8.7 Kg (19.2 lbs.) excluding batteries
Supplied Accessories
Data Disk
Music Stand
Owners Manual
Optional Accessories
Headphones : HPE-150
AC Power Adaptor : PA-6
Foot Switch : FC4, FC5
Keyboard Stand : L-6, L-7
Digital Effects
Reverb : 24 types
Chorus : 16 types
DSP (system/insertion) : 74 types
Harmony/Echo : 22 types
Registration Memory
32 Registration Banks : 1 4
Naming
Accompaniment Freeze
Disk Operations
Song playback/recording
Load (St yl e/ Mul t i Pad/ Regi st rat i on
Memory)
Save (St yl e/ Mul t i Pad/ Regi st rat i on
Memory)
Utility : Format, Song Copy, Delete File
Song
Song Volume
Song Track Settings : ON/OFF
Repeat Play
Song Transpose
Song Recording
Quick Record, Multi Record
Recording Tracks : 1 16
Punch In/Punch Out
Quantize
Naming
Clear
Setup Data : Volume, Octave, Pan, Reverb
depth, Chorus depth, DSP depth
Multi Pad Recording
User Pad Bank : 4 (41 44)
Naming
Clear
Chord Match
Style Recording
User Styles : 3 (113 115)
Recording Tracks : 6 Sections x 8 tracks
Drum Cancel
Quantize
Naming
Clear
MIDI
Transmit settings
Receive settings
Local Control
Clock
Initial Data Send
MIDI template
Other functions
Metronome
Upper Octave
Master Tuning
Scale Tuning
Split Point
Touch Sensitivity
Voice Set
Footswitch function
Pitch Bend Range
Auxiliary Jacks
DC IN 10-12V, PHONES/OUTPUT,
SUSTAIN, MIDI IN/OUT, TO HOST
PSR-550
4
I PANEL LAYOUT
G Top Panel
A3
69 C
2
B3
71 R
2
66
G3
67 S 68 70
C4
72 H 73 L
D4
74 75 H
E4
76 L
F4
77 H 78 L
G4
79 H 80 L
A4
81 82
B4
83 H
C5
84 L 85 S 87
D5
86 L
E5
88 H
F5
89 L M 90
G5
O 91
A5
93 92 94
B5
95
C6
96
9
REC
10
REC
11
REC
12
REC
13
REC
14
REC
15
REC
16
REC
MEASURE BEAT
/YES
TRACK(1~16)
PART DIAL
0 ~ 9
MUSIC DATABASE
SONG
STYLE
VOICE LR12
EASY
VIGATOR
nd Piano
DSP(FAST)
SUSTAIN HARMONY
TOUCH
!8 !9 @0
@6
@7
@8
#0
@9
#1 #2
$2
$3
A
A
C1
CLICK 36 T 37 S 39
F1
41 R
G1
43 L
D2
50 M
E2
52 H 42 44
A1
45 L
B1
47 M
C2
48 H 51
F2
L 53
G2
H 55 54 56
A2
57 L
D3
62 H
B2
59 M
L
C3
60 M
H
58 61 C
1
63 R
1
E3
64
F3
65 R 6
D1
38
E1
40 46 49
CHORD
dim
mM
6
7augsus4
119
513
1
REC
2
REC
3
REC
4
REC
5
REC
6
REC
7
REC
8
REC
TRANSPOSE REGIST-
RATION
TEMPO M
BACK NEXT
KEYBOARD START/STOP
EAS
NAVIGA
001 Grand
q
e
#3
#4
#5 #6
#7 #8 #9
!4
!3
!2
!5 !6 !7
$0
y i u
r
o !0
!1
t
w
@1 @2 @3
@4
@5
$1
$4
A
A
PSR-550
5
G Rear Panel
$5 [PHONES/OUTPUT] jack
$6 [FOOT SWITCH] jack
$7 [TO HOST] connector
$8 [HOST SELECT] switch
$9 [MIDI IN], [MIDI OUT] connectors
%0 [DC IN 1012V] jack
$7 $8 $9 $6 $5 %0
q Power switch ([STANDBY/ON])
w [MASTER VOLUME] dial
e [DEMO] button
r [RECORD] button
t [DIRECT ACCESS] button
y [DSP] button
u [FAST/SLOW] button
i [TOUCH] button
o [SUSTAIN] button
!0 [HARMONY/ECHO] button
!1 [BACK] button, [NEXT] button
!2 LCD display
!3 [VOICE CHANGE] button, [MIXER] button
!4 [TRACK 116] buttons
!5 [SONG] button
!6 [STYLE] button
!7 [MUSIC DATABASE] button
!8 [VOICE L] button
!9 [VOICE R1] button
@0 [VOICE R2] button
@1 [ACMP ON/OFF] button
@2 [ACMP/SONG VOLUME] button
@3 [TEMPO/TAP] button
@4 [TRANSPOSE] button
@5 [FUNCTION] button
@6 [PART ON/OFF]
[VOICE L] button
[VOICE R1] button
[VOICE R2] button
@7 Number buttons [1][0], [/NO], [+/YES]
@8 [EXIT] button
@9 Data dial
#0 [DISK LOAD] button
#1 [DISK SAVE] button
#2 [DISK UTILITY] button
#3 [SYNC STOP] button
#4 [SYNC START] button
#5 [START/STOP] button
#6 [INTRO] button
#7 [MAIN/AUTO FILL A] button
#8 [MAIN/AUTO FILL B] button
#9 [ENDING/rit.] button
$0 [REGISTRATION MEMORY] buttons
$1 [ONE TOUCH SETTING] buttons
$2 [MULTI PAD] buttons
$3 Disk Drive
$4 [PITCH BEND] wheel
PSR-550
6
I CIRCUIT BOARD LAYOUT & WIRING
Speaker
(Woofer-L)
L50
Speaker
(Tweeter-L)
W-STB W-ANA W-DMV
Speaker
(Woofer-R)
W-PNS
W-PNL
380
L40
W-MID
Speaker
(Tweeter-R)
W-PND 350
DM
MKS5 MK-H MK-L
G Lower case side
G Upper case side
AM
390
W-PIT W-MVR
Caution : Be sure to attach the removed filament tape just as it was before removal.
PSR-550
7
G Upper case side
390 370 360 W-LCD
W-EP2 W-ENC W-EP2 W-MVR W-PIT
AM
PN 1/5 PN 2/5
PN 4/5 PN 5/5
PN 3/5
Speaker
(Tweeter-R)
Speaker
(Tweeter-L) W-STB 390 380 W-PNL
FDD
W-PNS
W-PND
350 MKB MKS5-CN1 *2 *1 DM-CN180 *2 *1 6P (V381860)
360 LCV DM-CN960 *1 PN 1/5-CN102 *1 2P (V381920)
370 V4468500 FDV DM-CN950 *1 FDD-CN2 *1 3P
380 V3819400 FDD DM-CN850 *1 FDD-CN1 *1 34P
390 BLT DM-CN999 *1 Back Light 6P (V705780)
L40 SPW AM-CN480 *1 Speaker (Wo) 4P (V381950)
L50 BAT AM-CN510 *1 Battery 2P (V705790)
W-ANA ANA AM-CN100 DM-CN250 *1 4P (V381820)
W-DMV DMV AM-CN530 DM-CN920 *1 5P (V381840)
W-EP2 EP2 AM-J411,J412 Speaker (Tw-L) L=160 (V457700)
W-EP2 EP2 AM-J421,J422 Speaker (Tw-R) L=160 (V457700)
W-MID MID AM-CN800 DM-CN170 *1 7P (V381870)
W-ENC ENC PN 2/5-CN602 PN 1/5-CN502 *1 3P (V381800)
W-LCD LCD PN 1/5-CN101 DM-CN750 *1 12P (V445890)
W-MVR MVR PN 4/5-CN801 AM-CN390 *1 5P (V381830)
W-PIT PIT PN 3/5-CN603 PN 1/5-CN503 *1 3P (V381810)
W-PND PND PN 1/5-CN301 DM-CN650 *1 8P (V381880)
W-PNL PNL PN 1/5-CN501 DM-CN550 *1 10P (V381890)
W-PNS PNS PN 1/5-CN401 DM-CN150 *1 11P (V381900)
W-STB STB PN 5/5-CN701 AM-CN520 *1 6P (V381850)
* The parts with in Part No. are not available as spare parts.
* 1 : Edge mark is adjusted to Pin 1 mark ( mark).
Location Part No. Connector Assembly Destination Remarks
* 2 : Be sure to make a correct match when connecting MKS5 (CN1)
and DM (CN180).
Connecting the connectors in the wrong way around may cause
damage to the MKS5 circuit board.
RED BLUE WHITE
G Side view
Back Light Assembly
Back Light Assembly & LCD 390
P
S
R
-
5
5
0
8
I

B
L
O
C
K

D
I
A
G
R
A
M
X100
7MHz
CL1
5MHz
X200
33.8688MHz
X800
16MHz
28CA1-8819395
64M
IC230 44P
2,5,6,9,12,
15,16,19
HC74
TR
CN150
9 15
CN603
CN602
CN503
CN502
PITCH BEND
DATA DAIL
RE602
VR603
SI[0 10]
YAMAHA PSR-550
CN999
BACK LIGHT
Switch 2bit
IC700 16P
TO HOST HOST SELECT
MIDI
IN OUT
IF
LF501
VR800
12
9
IC370 20P
7
4
SW700
CN530 CN920
158
DC IN
(10-12V)
PHONES/OUTPUT
CN480
5/5
4/5
1/5
3/5
2/5
FOOT SWITCH
4-20,22
29-30,
52-54,
56-60,
62-64,
61-70
RESET
IC190
84
/IC +5D
1-10,
14-21,
23-30,
32-42
1-3 8,9 2,12
1
2
3
2
5
6
9,12,15
16,19
3,4,7,8,13,
14,17,18
2-15,17-21,
18-21,24-28,
35-38
2-5,7-10,
18-21,
24-28,
35-38
32-35,47,48,50,
51,53,60,61
6
39-46
15
2
/IC
22
/IC
30
2-5,7-10,
18-21,24-27,
35-38,40-43
2-11,15-22,
24-31,34-44
CN510
MKS5 CN1
+5R
IC1 44P
CPU
MK-L MK-H
CN3 CN2
CN4
IC100 112P
IC260 44P
IC200 168P
IC270 28P
IC310 42P
IC350 16P
IC800 64P IC999 14P IC700 20P
TR998
TR999
IC100 80P
IC200 60P
IC300 44P IC330 32P IC500 20P
IC600 16P
PSR-550
9
I DISASSEMBLY PROCEDURE
3. DM Circuit Board, Shield Box U and L
(Time required : About 10 min.)
3-1. Remove the lower case assembly. (See procedure 1)
3-2. Remove the two (2) screws marked [430B] and the
fourteen (14) screws marked [450]. The shield box
U and the DM circuit board can then be removed.
(Fig. 4)
3-3. Remove the three (3) screws marked [420A]. The
shield box L can then be removed. (Fig. 4)
4. Floppy Disk Drive Assembly
4-2. Remove the DM circuit board and the shield box
U and L. (See procedure 3)
4-3. Remove the four (4) screws marked [460]. The
floppy disk assembly can then be removed. (Fig. 5)
5. AM Circuit Board
5-3. Remove the eleven (11) screws marked [420B].
The AM circuit board can then be removed. (Fig. 5)
[430A] : Bind Head Tapping Screw-P 3.0X12 MFZN2Y (EP600300)
[440A] : Bind Head Tapping Screw-P 3.0X25 MFZN2Y (VK228100)
(Fig.1)
2. Spring Terminal
2-2. Remove the BAT connector assembly (red/black)
soldered to the spring terminal (+)/(-). (Fig. 2)
2-3. Remove the battery cover assembly. (Fig. 1)
2-4. Remove the spring terminal by releasing hooks
(2 locations for each). (Fig. 3)
1. Lower Case Assembly
1-1. Remove the fourteen (14) screws marked [430A]
and the four (4) screws marked [440A]. The lower
case assembly can then be removed. (Fig. 1)
[430A] [430A] [430A]
[430A] [430A]
[440A] [440A]
[430A]
Lower Case Assembly Battery Cover Assembly
(Fig.3)
Spring Terminal
Hook
Hook
(Fig.2)
Lower Case
Assembly
BAT Connector
Assembly (Black)
BAT Connector
Assembly (Red)
PSR-550
10
[30] : Bind Head Tapping Screw-P 3.0X8 MFZN2Y (EP600280)
[430B] : Bind Head Tapping Screw-P 3.0X12 MFZN2Y (EP600300)
[440B] : Bind Head Tapping Screw-P 3.0X25 MFZN2Y (VK228100)
[450] : Bind Head Tapping Screw-B 3.0X8 MFZN2Y (EP600250)
[L30] : Bind Head Tapping Screw-P 4.0X8 MFZN2BL (VB931600)
(Fig.4)
[420B] : Bind Head Tapping Screw-P 3.0X8 MFZN2Y (EP600280)
[460] : Sems Pan Head Screw 3.0X10 MFZN2Y (V5115200)
(Fig.5)
[420H] [450]
[420A]
[450] [420A] [450]
[L30]
[440B] [430B] [450] [430B] [30] [30] [440B]
[420H]X2
Keyboard
Assembly
Speaker
(Tweeter)
Speaker
(Tweeter)
Speaker
(Woofer)
Speaker
(Woofer)
Shield
Box U
[L30]
MKS5
[420B] [460] [420B] [420B]
[420B] [460]
DM
AM
FDD
AM
Shield Box L
PSR-550
11
7. PN 1/5 Circuit Board
7-3. Remove the floppy disk drive assembly. (See
procedure 4)
7-4. Remove the AM circuit board. (See procedure 5)
7-5. Remove the PN 4/5 circuit board. (See procedure 6)
7-6. Remove the twenty-five (25) screws marked
[420D]. The PN 1/5 circuit board can then be
removed. (Fig. 6)
8-4. Remove the encoder knob from the control panel
side. (Fig. 8)
8-5. Remove the three (3) screws marked [420E]. The
PN 2/5 circuit board can then be removed. (Fig. 6)
PN 5/5
(Fig.6)
[420D]
[420D] [420D]
[420E] [420D] [420D] [420C] [420D]
[420F]
Wheel Assembly
[420G]
PN 4/5
PN 1/5 PN 5/5
(Fig.7)
(Fig.8)
6-2. Remove the DM circuit board and the shild box U
and L. (See procedure 3)
6-4. Remove the volume knob from the control panel
side. (Fig. 7)
6-5. Remove the three (3) screws marked [420C]. The
9-2. Remove the two (2) screws marked [420F]. The
PN 3/5 circuit board can then be removed with the
wheel assembly. (Fig. 6)
10-2. Remove the two (2) screws marked [420G]. The
Volume Knob
Encoder Knob
PN 2/5
PN 3/5
PSR-550
12
11. Keyboard Assembly
11-2. Remove the two (2) screws marked [440B]. The
keyboard assembly can then be removed. (Fig. 4)
12. Speakers (Time required : About 10 min.)
12-2. Remove the right and left (woofer) speakers by
removing four (4) screws marked [L30] from each
speaker. (Fig. 4)
12-3. Remove the right and left (tweeter) speakers by
removing two (2) screws marked [420H] from each
speaker. (Fig. 4)
13. LCD and Back Light Assembly
13-3. Remove the floppy disk drive assembly.
(See procedure 4)
13-5. Remove the PN 1/5 circuit board. (See procedure 6)
13-6. The LCD can then be removed with the back light
assembly. (Fig. 9)
14. Disassembling the Keyboard Assembly
14-1 Remove the keyboard assembly. (See procedure 11.)
14-2 Remove the two (2) screws marked [30]. The
MKS5 circuit board can then be removed. (Fig. 4)
14-3 Remove the MK-L and MK-H circuit boards while
pressing the fifteen (15) hooks A inward, and then
remove the rubber contact. (Fig. 10)
14-4 Remove the twenty-one (21) screws marked [140],
then remove the black keys from the lower notes.
Afterwards, remove the white keys DFA and C'
and then remove the white keys CEGB from the
higher notes. At this time, lift the keys from the
front and slide them towards you. the keys can then
be removed from the assembly. (Fig. 11)
15. Assembling the Keyboard Assembly
15-1 Install the white keys CEGB from the lower notes,
and then install the DFA keys and C' key.
Afterwards install the black keys from the higher
notes, and tighten the twenty-one (21) screws
marked [140]. (Fig. 11)
15-2 Install the rubber contacts in the assembly while
pressing the keys as shown in Figure 12. Check
that the rubber contact has been firmly placed into
position in the area indicated by the arrow in Figure 13.
When fitting the rubber contacts, raise both ends
of the frame so that keys do not push the rubber
contact up.
15-3 Install the MK-L and MK-H circuit boards in the
assembly so that the hooks B hold it as shown in
Figure 14.
(Fig.11)
(Fig.12)
(Fig.13)
Rubber Contact
Rubber Contact
Hooks B
(Fig.10)
[140]
[140]
Black Key
White Key
DFA
Black Key
White Key
CEGB
White Key C
(Fig.14)
MK-L , MK-H
Hooks A
Black Key
Rubber Contact
White Key
MK-L , MK-H
(Fig.9)
Back Light Assembly LCD Rubber Connector
PSR-550
13
I LSI PIN DESCRIPTION
DM : IC270
PD789022GB-A15-8E (XZ560100) CPU........................................................................................... 13
HD6437042AF90F (XZ787100) CPU .................................................................................................. 14
HG73C205AFD (XU947C00) SWX00B (Tone Generator) ................................................................... 15
HD63266F (XI939A00) FDC (Floppy Disk Controller) ......................................................................... 16
S6A0065B01-Q0RJ (XV993A00) LCD DRIVER ................................................................................. 16
S6A0069X10-Q0RJ (XV226A00) LCD DRIVER.................................................................................. 17
PCM1716E (XU829A00) DAC (Digital to Analog Converter) ............................................................... 13
G PD789022GB-A15-8E (XZ560100) CPU MKS5 : IC1
PIN
NO.
I/O FUNCTION NAME
PIN
NO.
I/O FUNCTION NAME
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
P12
P11
P10
P47/KR7
P46/KR6
P45/KR5
P44/KR4
P43/KR3
P42/KR2
P41/KR1
P40/KR0
NC
IC
X2
X1
VSS0
VDD0
/RESET
P53
P52
P51/TO2
P50/TI0/TO0
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I
I
I/O
I/O
I/O
I/O
Port 1
Port 4/Key return signal detection input
Internally connected (N.C.)
Clock
Ground
Power supply
System reset
Port 5
Port 5/16-bit timer output
Port 5/External count clock input to 8-bit timer/8-bit timer output
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
P32/INTP2/CPT2
P31/INTP1
P30/INTP0
P22/RXD/SI0
P21/TXD/SO0
P20/ASCK//SCK0
P07
P06
P05
P04
P03
P02
P01
P00
NC
VDD1
VSS1
P17
P16
P15
P14
P13
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
Port 3/External interrupt input/Capture edge input
Port 3/External interrupt input
Port 2/Asynchronous serial interface serial data input/Serial interface serial data input
Port 2/Asynchronous serial interface serial data output/Serial interface serial data output
Port 2/Asynchronous serial interface serial clock input/Serial interface serial clock
Port 0
Power supply
Ground
Port 1
G PCM1716E (XU829A00) DAC (Digital to Analog Converter)
PIN
NO.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
I/O
I
I
I
O
I
O
-
-
-
-
O
-
O
-
LRCK
DATA
BCK
CLKO
XTI
XTO
DGND
VDD
Vcc2R
AGND2R
EXTR
NC
VOUTR
AGND1
NAME
Data input
Bit clock
Clock input
Clock input
Clock out
Digital ground
Digital power supply (+5 V)
Analog power supply (+5 V)
Analog ground
Rch, analog output
Rch, analog voltage output
Analog ground
FUNCTION
PIN
NO.
15
16
17
18
19
20
21
22
23
24
25
26
27
28
I/O
-
O
-
O
-
-
O
I
I
I
I
I
I
I
Vcc1
VOUTL
NC
EXTL
AGND2L
Vcc2L
/ZERO
/RST
/CS/IWO
MODE
/MUTE
MD/DM0
MC/DM1
ML/IIS
NAME
Lch, analog voltage output
Lch, analog output
Analog ground
Zero data flag
Reset
Chip select
Mode control select
(H: Software, L: Hardware)
Mute control
Mode control data/ De-emphasis select1
Mode control BCK/De-emphasis select2
Mode control Latch/input format select
FUNCTION
PSR-550
14
DM : IC100 G HD6437042AF90F (XZ787100) CPU
PIN
NO.
I/O FUNCTION NAME
PIN
NO.
I/O FUNCTION NAME
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
TIOC4/DACK0/PE14
PE15
VSS
A0
A1
A2
A3
A4
A5
A6
A7
A8
A9
A10
A11
A12
A13
A14
A15
A16
VCC
A17
VSS
/RAS/PB2
/CASL/PB3
/CASH/PB4
VSS
/RDWR / PB5
A18//BACK/PB6
A19//BREQ/PB7
A20/PB8
A21/PB9
VSS
/RD
/WDTOVF
VCC
/WRL
VSS
/CS1
/CS0
/IRQ3/TCLKD/PA9
TCLKC//IRQ2 /PA8
/CS3
/CS2
RXD1
/IRQ0/PA2
TXD0
RXD0
D15
D14
D13
VSS
D12
I/O
O
I
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
I
O
I
I/O
I/O
I/O
I
I/O
I/O
I/O
O
O
I
O
O
O
I
O
I
O
O
I/O
I/O
O
O
I/O
O
I
I/O
O
I
I/O
I/O
I/O
I
I/O
MTU I/O / DMA acknowledge / Port E
Port E
Ground
Address bus
Power supply
Address bus
Ground
Row address strobe / Port B
Column address strobe (low) / Port B
Column address strobe (high) / Port B
Ground
DRAM read / write / Port B
Address bus / Bus acknowledge / Port B
Address bus / Bus request / Port B
Address bus/ Port B
Ground
Read
Watch dog timer overflow
High write / Port A
Power supply
Low write
Ground
Chip select
Chip select
Interrupt request / Timer clock/ Port A
Timer clock / Interrupt request / Port A
Chip select
Chip select
Interrupt request / Port A / Serial clock
Data transmission / Port A
Data reception
Interrupt request / Port A
Data transmission
Data reception
Data bus
Ground
Data bus
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
D11
D10
D9
D8
VSS
D7
D6
D5
VCC
D4
D3
D2
D1
D0
VSS
XTAL
MD3
EXTAL
MD2
NMI
VCC
MD1
MD0
PLLVCC
PLLCAP
PLLVSS
PA15 / CK
/RES
PE0/DREQ0
PE1/DRAK0
PE2
PE3
PE4
VSS
PF0 / AN0
PF1 / AN1
PF2 / AN2
PF3 / AN3
PF4 / AN4
PF5 / AN5
AVSS
PF6 / AN6
PF7 / AN7
AVCC
VSS
PE5
VCC
PE6
PE7
PE8
PE9
PE10
VSS
PE11
PE12
I/O
I/O
I/O
I/O
I
I/O
I/O
I/O
I
I/O
I/O
I/O
I/O
I/O
I
I
I
I
I
I
I
I
I
I
I
I
O
I
I/O
O
O
O
O
I
I
I
I
I
I
I
I
I
I
I
I
O
I
I/O
I/O
I/O
O
O
I
O
O
I
Data bus
Ground
Data bus
Power supply
Data bus
Ground
Crystal oscillator
Mode control
Crystal oscillator
Mode control
Non-maskable interrupt request
Power supply
Mode control
Mode control
PLL Power supply
PLL capacitor
PLL Ground
Port A / Clock
Power on reset
Port E / DMA request
Port E / DMA acknowledge
Port E
Ground
Port F / Analog input
Analog ground
Port F / Analog input
Power supply
Ground
Port E
Power supply
Port E
Ground
Port E
Manual reset / Port E
/WRH/PA13
/IRQ1/PA5/SCK1
TXD1/PA4
/MRES/PE13
PSR-550
15
G HG73C205AFD (XU947C00) SWX00B (Tone Generator) DM : IC200
1 ICN I Initial clear 85 CMA3 O Program address bus
2 RFCLKI I PLL Clock 86 CMA8 O Program address bus
3 TM2 I PLL Control 87 CMA2 O Program address bus
4 AVDD_PLL Power supply 88 CRD O read signal
5 AVSS_PLL Ground 89 CMA1 O Program address bus
6 MODE0 I SWX dual mode 90 CUB O high byte effective signal
7 VCC7 Power supply 91 VCC91 Power supply
8 GND8 Ground 92 GHND92 Ground
9 XIN I crystal oscillator 93 CS1 O CS signal
10 XOUT O crystal oscillator 94 CMA0 O Program address bus
11 MODE1 I SWX separate mode 95 CLB O low byte effective signal
12 TEST0 I TEST pin 96 CMA12 O Program address bus
13 TESTON I TEST pin 97 CMA11 O Program address bus
14 AN0-P40 I A/D converter 98 CMA10 O Program address bus
15 AN1-P41 I A/D converter 99 CMA9 O Program address bus
16 AN2-P42 I A/D converter 100 GND100 Ground
17 AN3-P43 I A/D converter 101 CWE O write signal
18 AVDD_AN Power supply 102 CMA16 O Program address bus
19 AVSS_AN Ground 103 CMA15 O Program address bus
20 TXD0 O for MIDI or TO-HOST 104 CMA14 O Program address bus
21 TXD1 O for MIDI 105 CMA13 O Program address bus
22 EXCLK I Crystal oscillator 106 CMD8 I/O Program memory Data bus
23 SMD11 I/O Wave memory data bus 107 CMD7 I/O Program memory Data bus
36 GND36 Ground 120 GND115 Ground
40 SMD15 I/O Wave memory data bus 124 CMA21 O Program address bus
41 SOE O read signal 125 PDT15 I/O SWX access data bus
42 SWE O write signal 126 PDT14 I/O SWX access data bus
43 SRAS O RAS signal 127 PDT13 I/O SWX access data bus
44 SCAS O CAS signal 128 PDT12 I/O SWX access data bus
45 REFRESH O REFRESH signal 129 PDT11 I/O SWX access data bus
46 CS0 O CS signal 130 PDT10 I/O SWX access data bus
47 SMA0 O Memory address bus 131 PDT9 I/O SWX access data bus
59 SMA5 O Memory address bus 143 VCA143 Power supply
61 VCC61 Power supply 145 PAD2 I SWX access address bus
62 SMA11 O Memory address bus 146 PAD1 I SWX access address bus
63 SMA6 O Memory address bus 147 PAD0 I SWX access address bus
64 SMA10 O Memory address bus 148 VCC148 Power supply
65 SMA7 O Memory address bus 149 GND149 Ground
66 SMA9 O Memory address bus 150 PCS I Chip select
67 SMA17 O Memory address bus 151 PWR I write enable
68 SMA8 O Memory address bus 152 PRD I read enable
69 SMA18 O Memory address bus 153 RXD0 I for Midi or TO-HOST
70 SMA19 O Memory address bus 154 RXD1 I for Midi or Key scan
71 SMA20 O Memory address bus 155 SCLKI I EXT Clock
72 SMA21 O Memory address bus 156 ADIN I A/D converter
73 SMA22 O Memory address bus 157 ADLR O A/D converter LR clock
74 SMA23 O Memory address bus 158 DO0 O DAC
75 CMA20 O Program address bus 159 DO1 O DAC
76 CMA19 O Program address bus 160 SYSCLK O 1/2 clock
78 GND78 O Ground 162 GND162 Ground
79 CMA18 O Program address bus 163 WCLK O for DAC LR clock
80 CMA17 O Program address bus 164 QCLK O 1/12 clock
81 CMA5 O Program address bus 165 BCLK O IIS-DAC clock
82 CMA6 O Program address bus 166 SYI I Synch signal
83 CMA4 O Program address bus 167 IRQ0 I Interrupt request
84 CMA7 O Program address bus 168 NMI I Interrupt request
PIN
NO.
NAME I/O FUNCTION
PIN
NO.
NAME I/O FUNCTION
PSR-550
16
G HD63266F (XI939A00) FDC (Floppy Disk Controller)
G S6A0065B01-Q0RJ (XV993A00) LCD DRIVER
DM : IC800
PN : IC200
PIN
NO.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
I/O
I
I
I
I
I
I
I
I
I
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
O
O
I
I
I
I
I
I
I
I
8"//5"
XTALSET
/RESET
E//RD
RW//WR
/CS
/DACK
RS0
RS1
VSS1
VSS2
D0
D1
D2
D3
D4
D5
D6
D7
/DREQ
/IRQ
/DEND
VSS3
1/2 EX1
VCC1
NUM1
NUM3
IFS
SFORM
/INP
/READY
/WPRT
NAME
Data transmission speed
Clock select
Rest
Enable/Read
Read/write/Write
Chip select
DMA acknowledge
Register select
Ground
Data bus
DMA request
Interrupt request
Data end
Ground
Power supply
Host interface select
Format data
Index pulse
Ready from FDD
Write control signal
FUNCTION
PIN
NO.
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
I/O
I
I
I
O
O
O
O
O
O
O
O
O
O
O
O
O
O
/TRKO
/INDEX
/RDATA
XTAL2
EXTAL2
NC
XTAL1
EXTAL1
VSS4
VSS5
NC
VCC2
VCC3
VCC4
/WGATE
/WDATA
VSS6
/STEP
/HDIR
/HLOAD
/HSEL
VSS7
/DS0
/DS1
/DS2
/DS3
VSS8
/MON0
/MON1
/MON2
/MON3
VSS9
NAME
Track 00 signal
Index signal
Read data input from FDD
Clock
Clock
Ground
Power supply
Write control
Writ data to FDD
Ground
Step signal to control head of FDD
Direction
Head load
Head select
Ground
Drive select
Ground
Motor on
Ground
FUNCTION
NAME FUNCTION NAME FUNCTION
1 SC29 O 31 Vcc LCD driver circuit (-5V)
2 SC28 O 32 CL1 I Data shift
3 SC27 O 33 CL2 I Latch clock
4 SC26 O 34 GND(Vss) GND (0V)
5 SC25 O 35 DL1 I/O
6 SC24 O 36 DR1 I/O
7 SC23 O 37 DL2 I/O
Data input / output
8 SC22 O 38 DR2 I/O
9 SC21 O 39 NC
10 SC20 O 40 M I A lt e r na t e d s ig na l f o r L CD d r iv e r o u t p u t
11 SC19 O 41 SHL1 I Data interface
12 SC18 O Segment signal output 42 SHL2 I Data interface
13 SC17 O for LCD driving 43 FCS I Mods selection
14 SC16 O 44 V1 I
15 SC15 O 45 V2 I
16 SC14 O 46 V3 I
Power supply
17 SC13 O 47 V4 I
18 SC12 O 48 V5 I
19 SC9 O 49 V6 I
20 SC10 O 50 SC40 O
21 SC11 O 51 SC39 O
22 SC8 O 52 SC38 O
23 SC7 O 53 SC37 O
24 VDD Power supply 54 SC36 O
Segment signal output
25 SC6 O 55 SC35 O
for LCD driving
26 SC5 O 56 SC30 O
27 SC4 O Segment signal output 57 SC31 O
28 SC3 O for LCD driving 58 SC32 O
29 SC2 O 59 SC33 O
30 SC1 O 60 SC34 O
PIN
NO.
PIN
NO.
I/O I/O
PSR-550
17
G S6A0069X10-Q0RJ (XV226A00) LCD DRIVER PN : IC100
PIN
NO.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
I/O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
I
O
O
O
O
O
I
I
I
I/O
I/O
S22
S21
S20
S19
S18
S17
S16
S15
S14
S13
S12
S11
S10
S9
S8
S7
S6
S5
S4
S3
S2
S1
Vss
OSC1
OSC2
V1
V2
V3
V4
V5
CLK1
CLK2
Vdd
M
D
RS
R/W
E
DB0
DB1
NAME
Segment signal output for LCD
driving
Ground
Oscillator
Oscillator
Power supply
Data latch clock
Data shift clock
Power supply (+5 V)
Altamated signal for LCD driver outout
Display data interface
Read/write
Enable
Data interface
Data interface
FUNCTION
PIN
NO.
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
I/O
I/O
I/O
I/O
I/O
I/O
I/O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
DB2
DB3
DB4
DB5
DB6
DB7
C1
C2
C3
C4
C5
C6
C7
C8
C9
C10
C11
C12
C13
C14
C15
C16
S40
S39
S38
S37
S36
S35
S34
S33
S32
S31
S30
S29
S28
S27
S26
S25
S24
S23
NAME
Data interface
Common signal output for LCD
driving
Segment signal output for LCD
driving
FUNCTION
PSR-550
18
I IC BLOCK DIAGRAM
G TC74HCU04AP (IG142200)
SN74HCU04N (IG142250)
Hex Inverter
AM : IC810
G TC74HC32AP (IR003200)
SN74HC32N (IR0032500)
Quad 2 Input OR
DM : IC360
G TC74HC74AP (IR007400)
SN74HC74N (IR007450)
Dual D-Type Flip-Flop
DM : IC999
G TC74HC138AP (IR013800)
SN74HC138N (IR013850)
3 to 8 Demultiplexer
DM : IC350, 600
G TC74HC374AP (IR037400)
SN74HC374N (IR037450)
Octal 3-State D-Type Flip-Flop
DM : IC500, 700
G SN75C1168N (XU463A00)
Line Driver / Receiver
AM : IC700
G PC4572HA (XF633A00)
Dual Operational Amplifier
AM : IC100
G M5291P (XV856A00)
DC-DC Converter
DM : IC900
1
2
3
4
5
6
7
1A
1Y
2A
2Y
3A
3Y
Vss
14
13
12
11
10
9
8
VDD
6A
6Y
5A
5Y
4A
4Y
1 1A
2
3
4
5
6
7
1B
1Y
2A
2B
2Y
GND 8
9
10
11
12
13
14 VCC
4B
4A
4Y
3B
3A
3Y
INPUTS OUTPUTS
PR CLR CLK D Q Q
L
H
H
L
H
Q O
H
L
H
H
L
Q O
X
X
X
H
L
X
X
X
X
f
f
L
H
L
L
H
H
H
L
H
L
H
H
H
1
2
3
4
5
6
7
1CLR
1D
1CK
1PR
1Q
1Q
GND
14
13
12
11
10
9
8
VCC
2CLR
C
L
R
2D
D
2CK CK
2PR PR
2Q
2Q Q
Q
C
L
R
D
CK
PR
Q
Q
1
2
3
4
5
6
7
A
B Select
Enable
Output
B
C
C
G2A G2A
G2B G2B
G1 G1
Y7 Y7
16
15
14
13
12
11
10
Vcc
Y0 Y0
Y1 Y1
Y2 Y2
Y3
Output
Y3
Y4 Y4
Y5 Y5
8
GND 9 Y6
A
Y6
Q
D CK
OE
Q
D CK
OE
Q
D CK
OE
Q
D CK
OE
OUTPUT
CONTROL
1Q
1D
2D
2Q
3Q
3D
4D
4Q
GND
1 20
2 19
3 18
4 17
5 16
6 15
7 14
8 13
9 12
10 11
Vcc
8Q
8D
7D
7Q
6Q
6D
5D
5Q
CLOCK
Q
D CK
OE
Q
D CK
OE
Q
D CK
OE
Q
D CK
OE
1
2
3
4
5
6
7
1B
1A
1R
1DE
2R
2A
2B
16
15
14
13
12
11
10
Vcc
1D
1Y
1Z
2DE
2Z
2Y
8
GND 9 2D
1
A
2 3 4 5 6 7 8 9
+V -IN -V
+IN OUT
A A A
+V -IN
+IN OUT
B B B
-
+
B
-
+
3 Capacitor 6
Power supply
5 Input Ground 4
2
1 Switch-Collector
Switch-Emitter
S
R
Q
+
Driver
8
7
Peak current detect
Generator
Comparator
1.17V
reference
voltage
PSR-550
19
G M5243AP06 (XU911A00)
Graphic Equalizer
AM : IC370
G LA4705NA (XQ619A00)
Power Amplifier
AM: IC400
1 IN 1-1
2
3
4
5
6
7
8
9
10
NF 1-1
IN 2-1
NF 2-1
IN 3-1
NF 3-1
Non-Inverting
input-1
Inverting
input-1
Output-1
GND
Non-Inverting
input-1
Inverting
input-1
Output-1
GND 11
12
13
14
15
16
17
18
19
20 IN 1-2
NF 1-2
IN 2-2
NF 2-2
IN 3-2
NF 3-2
R
65k
1.2k
65k
1.2k
65k
1.2k
47k
R1
- + - +
Vret
I CIRCUIT BOARDS INDEX
Note : See parts list for details of circuit board conponent parts.
AM (XV935C0) ...................................................... 24
DM (XZ670D0) ................................................. 20/21
MK-H (XR565C0) .................................................. 27
MK-L (XR564C0) .................................................. 26
MKS5 (XZ594A0) .................................................. 26
PN 1/5 (XV934B0) ............................................ 22/23
PN 2/5 (XV934B0) ................................................. 24
PN 3/5 (XV934B0) ................................................. 24
PN 4/5 (XV934B0) ................................................. 25
PN 5/5 (XV934B0) ................................................. 25
PSR-550
20
I CIRCUIT BOARDS
G DM Circuit Board
Component side
to AM-CN800 to AM-CN530 to AM-CN100 to MKS5-CN1
t
o

P
N

1
/
5
-
C
N
1
0
1
t
o

P
N

1
/
5
-
C
N
1
0
2
t
o

F
D
D

A
s
s
'
y
t
o

F
D
D

A
s
s
'
y
t
o

B
a
c
k

L
i
g
h
t

A
s
s
'
y
to PN 1/5-CN401 to PN 1/5-CN501 to PN 1/5-CN301
2NA-V701940-1 1
PSR-550
21
G DM Circuit Board
Pattern side
2NA-V701940-2 1
PSR-550
22
G PN 1/5 Circuit Board
Component side
2NA-V701960-1
t to DM-CN650
to PN 2/5-CN602
to DM-CN750 to DM-CN960
to PN 3/5-CN603
to DM-CN550 to DM-CN150
A
A
A
A
PSR-550
23
G PN 1/5 Circuit Board
Pattern side
2NA-V701960-2
B
B
B
B
PSR-550
24
G AM Circuit Board
G PN 2/5 Circuit Board G PN 3/5 Circuit Board
Component side
Component side
to PN 1/5-CN502
to PN 1/5-CN503
PITCH BEND
Component side
FOOT SWITCH MIDI HOST SELECT TO HOST
to DM-CN170
to SPEAKER (Wo)
1999
IN OUT
to SPEAKER (Tw) R
C
C
AM : 2NA-V362300 1
PN 2/5, PN 3/5 : 2NA-V701960-1
PSR-550
25
Component side
to AM-CN390
MASTER VOLUME
to AM-CN520
STANDBY/ON
Component side
DC-IN
10-12V
PHONES/
OUTPUT
to DM-CN250
to PN 4/5-CN801
t
o

D
M
-
C
N
9
2
0
t
o

P
N

5
/
5
-
C
N
7
0
1
t
o

B
A
T
T
E
R
Y
to SPEAKER (Tw) L
C
C
G PN 4/5 Circuit Board G PN 5/5 Circuit Board
Component side
Component side
AM : 2NA-V362300 1
PN 4/5, PN 5/5 : 2NA-V701960-1
PSR-550
26
G MK-L Circuit Board
G MKS5 Circuit Board
to MK-H
to MK-H
to DM-CN180
Component side
Component side
D
D
E
E
D
D
E
E
MK-L : 2NA-VV58380
MKS5 : 2NAKZ-V679750 1
PSR-550
27
G MK-H Circuit Board
Component side
2NA-VV583900
to MKS5-CN4
to MK-L
F
F
G
G
F
F
G
G
PSR-550
28
I TEST PROGRAM
1. PREPARATION
1) PA-6 (AC adaptor) is used.
2) The volume is usually moved to the use position when no
volume change is required.
3) Measuring instruments:frequency counter, level meter
(with JIS-C filter)
Note : Connect a stereo plug to the [PHONES/OUTPUT]
jack at 33 ohms.
4) Jigs : foot switch, MIDI cable, floppy disk (2HD & 2DD)
2. HOW TO ENTER THE TEST PROGRAM
MANUAL MODE :
While pressing the C2#, F2 and G2# keys, turn the
[STANDBY/ON] switch on.
3. PROCEEDING THROUGH THE TEST
PROGRAM
MANUAL MODE :
1) When the test program is started, TEST appears on
the LCD.
2) Select the test program item to be executed by pressing
the [BACK] or [NEXT] button.
3) Press the [START/STOP] button to execute testing.
When the test result is OK, press the [START/STOP]
button to return to the test item name on display.
Proceed to the next test by pressing the [BACK] or
[NEXT] button.When the test result is OK, an asterisk
(*) is added in front of its item name on display.
When the test result is NG, press the [DEMO] button or
the lowest (leftmost) white key on the keyboard to return
to the test item name on display and then turn off the
[STANDBY/ON] switch to end the test program.
4. TEST PROGRAM LIST
TEST No. LCD (initial) Test Functions and Judgment Criteria
1 001:Version Displays ROM version.
ROM (Program, Wave) versions are displayed alternately on the LCD.
2 002:RomChk1 Checks the ROM.
The test results appear on the LCD.
3 003:RamChk1 Checks all the RAMs that are connected to the CPU.
4 004:WaveRomChk1 Checks the WAVE ROMs that are connected to the CPU.
7 007:FDD Chk Insert the floppy disks one by one (2DD and 2HD).
Checks the floppy disk drive unit.
9 009:Eff1RamChk Checks the effect RAM1.
Check by hearing that the sound of C3 is produced and no noise is heard.
11 011:TG1Chk Outputs the sine wave by changing the channels in sequence from C2 to G4.
After auto-scaling is finished, individual keys can be played. (If playing two or more
keys simultaneously, the first pressed key has priority to make a sound.)
If the [VOICE R1] button is pressed, that effect is applied when the sound is produced.
13 013:PitchChk Connect the frequency counter to the [PHONES] jack.
Sets PAN to Center and produces a signal at 440 +/- 0.22 Hz
Check that the correct signal is produced.
14 014:OutputR Connect the level meter (with a JIS-C filter) to the [PHONES] jack. (33 ohm load)
Set the [MASTER VOLUME] at maximum and check the output level (1 kHz).
PHONES L : less than -50.0 dBm PHONES R : -11.0 dBm +/- 2 dB
15 015:OutputL Connect the level meter (with a JIS-C filter) to the [PHONES] jack. (33 ohm load)
Set the [MASTER VOLUME] at maximum and check the output level (1 kHz).
PHONES L : -11.0 dBm +/- 2 dB PHONES R : less than -50.0 dBm
16 016:EQLow Check the sine wave output at about 65.4Hz (C1).
17 017:EQMid Check the sine wave output at about 523Hz (C4).
18 018:EQHigh Check the sine wave output at about 4186Hz (C7).
PSR-550
29
19 019:D/ANoise Connect the level meter (with a JIS-C filter) to the [PHONES] jack. (33 ohm load)
Set the [MASTER VOLUME] at maximum. Check D/A converter noise.
PHONES L/R : Less than -80.0 dBm
20 020:SW,LEDChk Check the switches on the panel and LED.
Press the switches on the LCD as instructed. A pre-assigned note is output when the
switch is pressed. (See table 1.) When the switch with LED is pressed, that LED will
light up. As the check result appears on the LCD when all the switches are pressed as
instructed. Check that OK is displayed. For the dial check, confirm that turning the
data dial clockwise will increase the figure in the range of 0 to 100 and turning it
counterclockwise will reduce it. (To stop this check before reaching its end, press the
lowest (leftmost) white key on the keyboard to return to the test item name on display.)
21 021:AllLEDOn Check that the all LEDs on the panel are on.
22 022:RedLEDOn Check that the all red LEDs on the panel are on.
23 023:GreenLEDOn Check that the all green LEDs on the panel are on.
28 028:AllLCDOn Check that all LCD dots are on.
29 029:AllLCDOff Check that all LCD dots are off.
30 030:LCDBacLig Lighting (color) check of LCD back light.
Press the [DIRECT ACCESS] button and check that the back light color changes in the
order of violet, red, OFF and blue.
32 032:Pedal1Chk Connect the foot switch (FC-4 or FC-5) to the [FOOT SWITCH] jack.
Check that the C3 note is output when pressing and releasing the pedal and the C4 note
is output when pressing the pedal again.
34 034:PBWheelChk Check that the C3 note is output when rotating the [PITCH BEND] wheel to minimum
and the C4 note is output when rotating it to maximum.
38 038:MidiChk After connecting the [MIDI IN] jack and [MIDI OUT] jack with a MIDI cable, execute
the test. Set the [HOST SELECT] switch to MIDI
Check that the C4 note is output and that the test results appear on the LCD.
39 039:ToHostChk Connect pin 3 to pin 5 and pin 6 to pin 8 of the TO HOST terminal, and execute the test.
Check that the following note sounds when changing the HOST SELECT switch position
according to the LCD indication; the LCD will display OK. (PC1 : note C3 ; PC2 :
note C4 ; MAC : note C5) If there is no output after one second, it is judged NG.
41 041:BatteryChk Removing the AC adapter sets to the Battery Check mode. (In advance, install the
batteries.)
As the check result appears on the LCD, check that OK and the A/D value of the
battery are displayed.
The A/D value of the battery is detected and displayed on the LCD about 10 seconds
after the power was turned on.
42 042:RomChk2 Checks the ROMs that are connected to the CPU.
43 043:RamChk2 Checks the RAMs that are connected to the CPU.
44 044:WaveRomChk2 Checks the WAVE ROM.
47 047:BackUpChk2 Performs the RAM back-up check.
Check that the display reads NG, then turn off the power switch. (A time of the
beginnings surely becomes NG.)
Enter the test program and perform the RAM back-up checks, then check again.
Check that the LCD displays OK.
PSR-550
30
* NOTE : The above tests Nos. 42-47, require approximately 25 minutes to conduct.
If the time is not available to perform the tests, proceed the test No.48 by pressing several the [NEXT] button.
48 048:FactorySet All the RAMs are initialized and set to the factory preset data when executing this test.
The results appear on the LCD.
49 049:TestExit Exit from the test program after executing this test.
G TABLE 1
ORDER SWITCH LCD NOTE
1 DSP Push DSP C3
2 DSP FAST/SLOW Push Fast/Slow C#3
3 TOUCH Push Touch D3
4 SUSTAIN Push Sustain D#3
5 HARMONY Push Harmony E3
6 BACK Push Back F3
7 NEXT Push Next F#3
8 DIRECT ACCESS Push Direct Acces G3
9 VOICE CHANGE Push Voice Change G#3
10 MIXER Push Mixer A3
11 Track 1 Push Track 1 A#3
12 Track 2 Push Track 2 B3
13 Track 3 Push Track 3 C4
14 Track 4 Push Track 4 C#4
15 Track 5 Push Track 5 D4
16 Track 6 Push Track 6 D#4
17 Track 7 Push Track 7 E4
18 Track 8 Push Track 8 F4
19 Track 9 Push Track 9 F#4
20 Track 10 Push Track 10 G4
21 Track 11 Push Track 11 G#4
22 Track 12 Push Track 12 A4
23 Track 13 Push Track 13 A#4
24 Track 14 Push Track 14 B4
25 Track 15 Push Track 15 C5
26 Track 16 Push Track 16 C#5
27 (Tenkey) 1 Push Tenkey 1 D5
28 (Tenkey) 2 Push Tenkey 2 D#5
29 (Tenkey) 3 Push Tenkey 3 E5
30 (Tenkey) 4 Push Tenkey 4 F5
31 (Tenkey) 5 Push Tenkey 5 F#5
32 (Tenkey) 6 Push Tenkey 6 G5
33 (Tenkey) 7 Push Tenkey 7 G#5
34 (Tenkey) 8 Push Tenkey 8 A5
35 (Tenkey) 9 Push Tenkey 9 A#5
36 (Tenkey) Push Tenkey B5
37 (Tenkey) 0 Push Tenkey 0 C3
38 (Tenkey) + Push Tenkey + C#3
PSR-550
31
ORDER SWITCH LCD NOTE
39 EXIT Push Exit D3
40 DEMO Push Demo D#3
41 RECORD Push Record E3
42 SONG Push Song F3
43 STYLE Push Style F#3
44 MUSIC DATABASE Push MDB G3
45 VOICE L Push Voice L G#3
46 VOICE R1 Push Voice R1 A3
47 VOICE R2 Push Voice R2 A#3
48 ACMP ON/OFF Push Acmp On/Off B3
49 ACMP/SONG VOLUME Push Acmp Volume C4
50 TEMPO/TAP Push Tempo/Tap C#4
51 TRANSPOSE Push Transpose D4
52 FUNCTION Push Function D#4
53 PART ON/OFF VOICE L Push Part Voice L E4
54 PART ON/OFF VOICE R1 Push Part Voice R1 F4
55 PART ON/OFF VOICE R2 Push Part Voice R2 F#4
56 LOAD Push Load G4
57 SAVE Push Save G#4
58 UTILITY Push Utility A4
59 SYNC STOP Push Sync Stop A#4
60 SYNC START Push Sync Start B4
61 START/STOP Push Start/Stop C5
62 INTRO Push Intro C#5
63 MAIN A Push Main A D5
64 MAIN B Push Main B D#5
65 ENDING Push Ending E5
66 ONE TOUCH SETTING Push OTS F5
67 MEMORY Push Memory F#5
68 REGIST 1 Push Regist 1 G5
69 REGIST 2 Push Regist 2 G#5
70 REGIST 3 Push Regist 3 A5
71 REGIST 4 Push Regist 4 A#5
72 FREEZE Push Freeze B5
73 MULTI PAD 1 Push Pad 1 C3
74 MULTI PAD 2 Push Pad 2 C#3
75 MULTI PAD 3 Push Pad 3 D3
76 MULTI PAD 4 Push Pad 4 D#3
77 MULTI PAD STOP Push Pad Stop E3
78 Dial Dial Down
79 Dial Dial Up
PSR-550
32
Even though these settings are retained in memory, you
should save them and all your important data to
floppy disk for permanent, safe storage. To save all of the
data types listed above to floppy disk, use the Save
operation and select All as the file type.
G Data Backup
Except for the data listed below, all PSR-550 panel settings are reset to their initial settings whenever the power is turned
on. The data listed below are backed up - i.e. retained in memory - as long as an AC adaptor is connected or a set of batteries
is installed.
User Style data
User Pad data
Registration Memory data
Registration Memory Bank Number
Registration Memory/One Touch Setting status
Freeze on/off
MIDI Transmit settings
MIDI Receive settings
Voice Set on/off
Voice L (Voice Change, Mixer)
Fingering mode
Split Point
Sustain on/off
Upper Octave setting
Pitch Bend Range
Scale Tuning
Transpose
Footswitch Function, Polarity
Touch on/off, Sensitivity
Multi Pad setting
Master Tuning
Metronome on/off
All data listed above will be lost if the power is interrupted
in other words, if the power is turned off, the AC adaptor
is disconnected and the batteries are removed. When this
happens, the next time you turn on the PSR-550, a Clear
Backup message appears in the display, the Data
Initialization operation (below) is automatically executed,
and the PSR-550 is set to the Style mode.
G Data Initialization
All data can be initialized and restored to the factory preset condition by turning on the power while holding the highest
(rightmost) white key on the keyboard. Now Initializing will appear briefly on the display.
Now Initializing
All registration and User Style/Pad memory data, plus the
other settings listed above, will be erased and/or changed
when the data initialization procedure is carried out.
Carrying out the data initialization procedure will usually
restore normal operation if the PSR-550 freezes or begins
to act erratically for any reason.
CAUTION
I DATA BACKUP & INITIALIZATION
PSR-550
33
I ALERT MESSAGE LIST
No File
Unformatted Disk
Disk Error
Write-protected
File Protected
No Disk
Disk Removed
Disk Full
Wrong Disk
Same Name
Maximum 60 Songs
Memory Full
The disk contains no file to be loaded, copied, or be deleted.
Insert the disk that contains files to be loaded, copied, or deleted.
Insert Song Disk
An unformatted disk is inserted.
An error occurred during execution of a disk operation.
Try changing the disk.
This message also may appear when executing the Load operation if
the internal memory becomes full.
The floppy disks write-protect tab is set to ON.
Remove the disk, set write-protect to off, reinsert the disk and attempt
the operation again.
The file is a purposely copy-protected disk.
The Copy function is not possible.
There is no floppy disk inserted into the disk drive.
Insert a disk.
This message appears when you press the [SONG] button without a
disk in the disk drive.
An error occured because the disk was removed during a disk opera-
tion.
Never remove a disk during a disk operation since this could damage
both the disk and the drive.
The disks memory capacity is full and no additional data can be re-
corded.
Delete one or more unneeded songs (using Delete), and attempt the
operation again.
When using the Copy operation, the inserted disk is different from the
source or destination disk.
Remove the disk and reinsert the proper Disk.
More than one file has the same name on the disk.
Change the name.
Maximum of 60 songs can be recorded.
Delete one or more unneeded songs (using Delete), and attempt the
song recording again.
If the internal memory becomes full during Style/Pad recording, this
message will appear on the display and recording will stop.
PSR-550
34
Memory Over
This message appears when executing the Quantize or Recording
operations (in the Style Recording mode) when the internal memory
is full.
Clear Backup
Now Initializing
Cannot Operate
Cannot Set MIDI
CannotTurnHar.On
CannotTurnDSP On
CannotEnterFunc.
Battery Low
Data Not Found
User Style Full
Preset Data
This message appears when you attempt to edit, quantize or clear
the track which contains no data in the Record mode.
This message indicates that recording a new User style cannot be
started when all three User styles have recorded data. Make sure to
clear at least one of the three User styles before recording a new
User style.
This message appears when you attempt to edit, or quantize the
track (other than RHYTHM) which contains preset data in the Style
Record mode.
This function cannot be used during Song/Style/Pad recording.
The MIDI function cannot be set during recording, playback, and
disk operations.
Harmony cannot be turned on during Style/Pad recording.
DSP cannot be turned on during Style/Pad recording.
This message appears to indicate you cannot enter the function
when you select a Multi Pad function in the Multi Pad Recording
mode.
This message may appear when the PSR-550 is turned on, and
indicates that user data temporarily stored in the internal memory
has been lost . When this happens, the Data Initialization operation
is automatically executed, and the PSR-550 is set to the Style mode.
If this message appears even when the AC adaptor is connected
or the battery power is adequate, the backup data is faulty. Use
the Data Initialization function .
All data can be initialized and restore to the factory preset condition
by turning the STANDBY switch ON while holding the highest
(rightmost) white key on the keyboard.
When the batteries run down this message appears every few
seconds. Exchange all the batteries with the new ones .
PSR-550
35
I MIDI IMPLEMENTATION CHART
[Portable Keyboard] Date : 30-NOV-2000
Model : PSR-550 MIDI Implementation Chart Version : 1.0
Function... Transmitted Recognized Remarks
Basic Default 1 - 16 *1 1 - 16 *2
Channel Changed 1 - 16 *1 1 - 16 *2
Default 3 3
Mode Messages x x
Altered ************** x
Note 0 - 127 0 - 127
Number : True voice ************** 0 - 127
Velocity Note ON o 9nH,v=1-127 o 9nH,v=1-127
Note OFF x 9nH,v=0 x
After Keys x x
Touch Chs x o
Pitch Bend o o
0,32 o o Bank Select
1,5,11 x o
7,10 o o
6,38 o o Data Entry
Control 64,66-67 o o
65 x o Portamento
Change 72 o o Sound Controller
71,73-74 x o Sound Controller
84 x o Portament Cntrl
91,93-94 o o Effect SendLevel
96-97 x o Data Inc,Dec
98-99 x o NRPN LSB,MSB
100-101 o o RPN LSB,MSB
Prog o 0 - 127 o 0 - 127
Change : True # **************
System Exclusive o o
: Song Pos. x x
Common : Song Sel. x x
: Tune x x
System : Clock o o
Real Time : Commands o o
: All Sound Off x o
Aux : Reset All Cntrls x o
: Local ON/OFF x x
Mes- : All Notes OFF x o (123-127)
sages : Active Senseo o
: Reset x x
Mode 1 : OMNI ON, POLY Mode 2 : OMNI ON, MONO o : Yes
Mode 3 : OMNI OFF, POLY Mode 4 : OMNI OFF, MONO x : No
PARTS LIST
I CONTENTS
OVERALL ASSEMBLY............................................................................................................................. 2
KEYBOARD ASSEMBLY ......................................................................................................................... 5
ELECTRICAL PARTS ...................................................................................................................... 6 13
I WARNING
Notes : DESTINATION ABBREVIATIONS
The numbers QTY show quantities for each unit.
The parts with -- in PART NO. are not available as spare parts.
This mark } in the REMARKS column means these parts are interchangeable.
The second letter of the shaded ( ) part number is O, not zero.
The second letter of the shaded ( ) part number is I, not one.
M: South African model
O : Chinese model
Q : South-east Asia model
T : Taiwan model
U : U.S.A. model
V : General export model (110V)
W: General export model (220)
N,X : General export model
Y : Export model
A : Australian model
B : British model
C : Canadian model
D : German model
E : European model
F : French model
H : North European model
I : Indonesian model
J : Japanese model
Components having special characteristics are marked Z and must be replaced with parts having speci-
fication equal to those originally installed.
PSR-550
2
I OVERALL ASSEMBLY
130
60
140
420
50
120
220
150
170
420
30
40
470
20
210b
220
210a
420
210
70
80
90
280
420
420
220
140
160
110
100
10
10b
10e
10d
420
230
420
220
510
260
490
430
420
10d
10c
10e
10a
20
470
40
30
440
510 370
380
F50
F40
F60
F50
F20
F10
F50 F30
460
330
330a
330b
L20
L10f
L10c
L80
430
L60
L90
L90
L70
L50
320
L140
L130
L130
L130
340
L10b
L10g
L100
L10f
L10c
L10
L10a
L10e
L10d
L90
L90
L40
L90
L30
L20
L30
190
470
470
390
180
200
L60
F40
420
300
430
450
310
360
250
420
350
290
240
440
270
2/5
4/5
220 5/5
1/5
3/5
Music Rest
Floppy Disk Drive Assembly
Upper Case Assembly
Wheel
Assembly
Lower Case with Speaker
Battery Cover Assembly
Keyboard Assembly
(See page 5.)
PSR-550
3
REF NO. PART NO. DESCRIPTION REMARKS QTY
: New Parts RANK: Japan only
RANK
OVERALL ASSEMBLY PSR-550 (V703480)
* 10 Upper Case Assembly
10a Upper Case (V703910)
* 10b Speaker Grille LEFT
* 10c Speaker Grille RIGHT
10d Vibration-proof Tape 18X25 2 03
10e Spacer L100 (V384790) 12
20 Speaker 3.0cm TWEETER 2 02
30 Holder (V364540) 2
40 Sponge (V364550) 2
* 50 Panel Switch x1 IVORY ACMP ON/OFF,FINGERING, 8
TEMPO/TAP,TRANSPOSE,ACMP/
SONG VOLUME,VOICE L/R1/R2
* 60 Panel Switch x3 BLUE LOAD,SAVE,UTILITY
* 70 Panel Switch x7 IVORY/RED SYNC. STOP,SYNC START,
START/STOP,INTRO,MAIN/
AUTO FILL ENDING/rlt.
* 80 Panel Switch x7 IVORY/RED REGISTRATION MEMORY M/1-4
* 90 Panel Switch x5 IVORY MULTI PAD 1-4,STOP
* 100 Panel Switch x1 IVORY DEMO
* 110 Panel Switch x1 RED RECORD
* 120 Panel Switch x6 BLUE FANCTION,SONG,STYLE,
VOICE L/R1/R2
* 130 Panel Switch x16 IVORY Display Select TRACK 1-16
* 140 Panel Switch x1 BLUE DIRECT ACCESS,EXIT 2
* 150 Panel Switch x7 BLACK/IVORY DSP,FAST/SLOW,TOUCH,
SUSTAIN,HARMONY/ECHO,
BACK,NEXT
* 160 Panel Switch x12 BLACK 0-9,NO/-,YES/+
* 170 Panel Switch x1 IVORY VOICE CHANGE,MIXER 2
* 180 LCD TTR
190 Rubber Connector SS-174W 2 01
* 200 Back Light Assembly PT
210 Wheel Assembly (VT48770)
210a Wheel BLACK PITCH BEND 03
210b Spring 03
* 220 Circuit Board PN (1/5-5/5)
230 Circuit Board AM 27
240 Floppy Disk Drive Assembly (V704320)
250 Shield Box LOWER (V375850)
* 260 Circuit Board DM
* 270 Keyboard Assembly 16M C61 P2M MKS5
280 Knob RED STANDBY/ON 03
290 Knob BLACK MASTER VOLUME 01
* 300 LCD Panel
310 Encoder Knob IVORY DATA Dial 02
320 Lower Case with Speaker (V703900)
* 330 Battery Cover Assembly PT
330a Battery Cushion WHITE (V710060) 3
330b Nonworen Fabric Cloth 10X70X0.5 (V781030) 2
340 Label FE (V703710)
350 Connector Assembly MKB 6P (V381860)
360 Connector Assembly LCV 2P (V381920)
370 Connector Assembly FDV 3P 02
380 Connector Assembly FDD 34P 03
390 Connector Assembly BLT PH 6P (V705780)
420 Bind Head Tapping Screw-P 3.0X8 MFZN2Y 53 01
450 Bind Head Tapping Screw-B 3.0X8 MFZN2Y 14 01
460 Sems Pan Head Screw SW3.0X10 4 01
470 Adhesive Tape 12X50 17 03
490 Shield Box UPPER (V375860)
510 Adhesive Tape 12X70 3 03
Floppy Disk Drive Assembly (V704320)
F10 Floppy Disk Drive 3.5inch DF354H 13
F20 Holder, FDD LEFT (V362620)
F30 Holder, FDD RIGHT (V362630)
F40 Bind Head Screw 3.0X5 MFZN2Y 4 01
--
V7038900
--
V7038700
V7038800
VJ861500
--
XV948A00
--
--
V7044100
V7404800
V7044200
V7044300
V7044400
V7044500
V7044600
V7404900
V7044700
V7405400
V7044800
V7378300
V7044900
V7126700
V3836800
V7042500
--
VT366400
VT440100
V7019600
V3623000
--
--
V7019400
V7127100
VQ218800
VU432400
V7045000
V3833900
--
V7042300
--
--
--
--
--
V4468500
V3819400
--
EP600280
EP600300
VK228100
EP600250
V5115200
VA126100
--
VN195400
--
V6492300
--
--
EG330150
PSR-550
4
RANK
F50 Bushing 4 01
F60 Adhesive Tape ECT #590S W=15 (ZL35000)
Lower Case with Speaker (V703900)
* L10 Lower Case Assembly
L10a Lower Case (V703940)
L10b Foot T1.6 BLACK 5 01
L10c Cushion 1X15X875 (V704140) 2
L10d Speaker Box L (V704110)
L10e Speaker Box R (V704120)
L10f Bind Head Tapping Screw-P 4.0X10 MFZN2Y 45 01
L10g Dust Proof Cloth (V720600) 6
L20 Speaker 12.0cm 4 ohm 6W WOOFER 2 06
L30 Bind Head Tapping Screw-P 4.0X8 MFZN2BL 8 01
L40 Connector Assembly SPW XH 4P (V381950)
L50 Connector Assembly BAT XH 2P (V705790)
* L60 Spring Terminal 5
* L70 Spring Terminal (+)
* L80 Spring Terminal (-)
L90 Adhesive Tape 12X50 11 03
L100 Vibration-proof Tape 18X25 4 03
L130 Nonworen Fabric Cloth 40X13X0.5 (V771130) 6
L140 Nonworen Fabric Cloth 13X13X0.5 (V771140)
ACCESSORIES
Music Rest 07
* Floppy Disk 3.5inch
* AC Adapter PA-6(B) J J
AC Adapter PA-6 CHN O 16
* Japanese Guide Sheet J
* Chinese Guide Sheet O
VA121600
--
--
V7039300
--
CB043750
--
--
--
EP640500
--
XT278A00
VB931600
--
--
V7060200
V7060500
V7060700
VA126100
VJ861500
--
--
VU469500
V7037800
V6952000
VZ428400
V7038000
V7038100
PSR-550
5
RANK
* KEYBOARD ASSEMBLY 16M C61 P2M MKS5 PSR-550
30 Bind Head Tapping Screw-P 3.0X8 MFZN2BL 2 01
50 Frame C61 (VS15380)
50 Frame C61 16M 10
50 Frame C61 16M,L (V676090)
60 White Key 16L CEGBDFA 5 03
60a White Key 16L CEGB (VH18090) 5 03
60b White Key 16L DFA (VH18100) 5 03
80 White Key 16L C' 01
90 Black Key 16L # 5 03
100 Felt 03
110 Rubber Sheet 01
120 Rubber Contact 16M OCT 2M 12KEYS 5 06
130 Rubber Contact 16M C' 2M 1KEY 05
140 Bind Head Tapping Screw-P 3.0X16 MFZN2BL 21 01
140 Bind Head Tapping Screw-P 3.0X16 MFZN2B 21 01
150 Grease G-31KA 50g 10
160 Circuit Board Assembly MKS5 TY KBD SW (V712720)
170 Nonworen Fabric Cloth 40X13X0.5 (V771130)
Circuit Board Assembly MKS5 TY KBD SW (V712720)
S1 Circuit Board MK-L 09
S2 Circuit Board MK-H 09
* S3 Circuit Board MKS5
S4 Cable MK-A 12P 03
S5 Cable MK-B 12P 03
S6 Cable MK-C 7P 03
S7 Cable MK-D 5P 03
S8 Sponge A 16M (VV61890) 2
S9 Sponge B 16M (VV61900) 2
S10 Adhesive Tape C 12 (VV61910)
S11 Adhesive Tape D 12 (VV61920) 3
V7127100
EP600280
EP630220
--
VU328600
--
VH1809C0
--
--
VH181100
VH181200
VH181300
VH181400
VU328400
VU328500
EP600310
VB205200
VS756700
TX920280
--
--
--
VV583800
VV583900
V7112200
VV583100
VV583600
VV583500
VV583700
--
--
--
--
I KEYBOARD ASSEMBLY
140
90
60
60b
60a
50
110
30
S7
S2
S6
S4
S5
S1
S3
80
100
120
160
120
120
120
120
130
PSR-550
6
I ELECTRICAL PARTS
RANK
ELECTRICAL PARTS PSR-550
Circuit Board AM (XV935C0) 27
* Circuit Board DM (XZ670D0)
Circuit Board MK-H (XR565C0) 09
Circuit Board MK-L (XR564C0) 09
* Circuit Board MKS5 (XZ594A0)
* Circuit Board PN (XV934B0)
Circuit Board AM (XV935C0) 27
Heat Sink 05
Jumper Wire 0.55 (VA07890)
C0100 Semiconductive Cera. Cap. 0.1000 25V Z 01
C0111 Mylar Capacitor 0.0680 50V J 02
-0113 Mylar Capacitor 0.0680 50V J 02
-0123 Mylar Capacitor 0.0680 50V J 02
C0301 Electrolytic Cap. 100.00 25.0V 01
C0312 Electrolytic Cap.-BP 10.00 16.0V 01
C0371 Monolithic Mylar Capacitor ECQ-V1H224JL3 01
C0375 Mylar Capacitor 4700P 50V J 01
C0377 Ceramic Capacitor-B 1500P 50V K 01
C0381 Monolithic Mylar Capacitor ECQ-V1H224JL3 01
C0385 Mylar Capacitor 4700P 50V J 01
C0411 Monolithic Ceramic Cap. 1.000 25V Z 01
-0504 Semiconductive Cera. Cap. 0.1000 25V Z 01
C0505 Electrolytic Cap. 6800 25.0V 03
C0610 Ceramic Capacitor-F 0.0100 50V Z 01
C0802 Ceramic Cap.-B 100P 50V K 01
V3623000
V7019400
VV583900
VV583800
V7112200
V7019600
V3623000
VV856400
--
VC694800
UA654680
UA654680
UA654680
UA654680
UR848100
UR848100
UR837100
UA654100
UN837100
UA654100
UN837100
UR866470
UR866470
VC694800
VR168700
UA654220
UA654100
UA654270
UA653470
UA654150
FG613150
UR837470
VR168700
UA654220
UA654100
UA654270
UA653470
UA654150
FG613150
UR848100
VC694800
UR865470
UR827330
UR828100
VT757800
V6490000
FG612470
VT757800
V6490000
FG612470
UA654470
UA654470
UA654470
UA654470
UR837470
UR837470
VC694800
VC694800
VT848900
VC694800
FG644100
FG644100
FG644100
UR837100
UR837100
FG612100
FG644100
UN817470
PSR-550
7
RANK
CN100 Cable Holder 51048 4P TE 01
CN390 Wire Trap 52147 5P TE 01
CN480 Base Post Connector XH 4P TE 01
Z D0501 Diode 20E1-FC4 01
Z D0502 Diode 20E1-FC4 01
D0610 Diode 1SS133,1SS176 01
-0814 Diode 1SS133,1SS176 01
IC100 IC UPC4572HA OP AMP 02
IC300 IC AN78L06 REGULATOR +6V 01
IC370 IC M5243AP06 EQUALIZER 03
IC400 IC LA4705NA 17W BTL POWER AMP. 05
IC700 IC SN75C1168N LINE TRANSCEIVER 05
IC810 IC TC74HCU04AP INVERTER 02
IC810 IC SN74HCU04N 01
J0411 Jumper Wire 0.55 (VA07890)
JK490 Phone Jack YKB21-5006 PHONES/OUTPUT 03
Z JK500 Connector HTJ-020-05AZ DC-IN 10-12V
JK610 DIN Connector 5P YKF51-5050 MIDI IN 01
JK620 DIN Connector 5P YKF51-5050 MIDI OUT 01
JK700 DIN Connector DIN 8P MD-S810 TO HOST 03
JK900 Phone Jack YKB21-5012 BLACK FOOT SWITCH 02
L0471 Coil FL5R200QNT 20uH 01
L0471 Choke Coil R-5C.20U 20uH 01
L0701 Ferrite Bead BL02RN2-R62T4 02
-0707 Ferrite Bead BL02RN2-R62T4 02
-0903 Coil FL5R200QNT 20uH 01
-0903 Choke Coil R-5C.20U 20uH 01
-0903 Choke Coil R-5C.20U 20uH 01
Z LF501 Line Filter SU10VD-20020 03
PC610 Photo Coupler PC-900V 03
R0111 Carbon Resistor 15.0K 1/4 J 01
R0114 Jumper Wire 0.55 (VA07890)
VC694800
VI 878200
VK024900
LB918040
LB918020
VF728300
VI 878300
VI 878500
VL723600
VL723600
VB941200
VB941200
XF633A00
XE924A00
XU911A00
XQ619A00
XU463A00
I G142200
I G142250
--
--
--
--
--
--
--
LB101870
V6557600
VJ107200
VJ107200
VM761000
VB312600
VB835000
V2889500
V2993400
VB835000
V2889500
V2993400
VB835000
V2889500
V2993400
VB835000
V2889500
V2993400
VB835000
V2889500
V2993400
VB835000
V2889500
V2993400
VB835000
V2889500
V2993400
GE300670
GE300670
VB835000
VB835000
V2889500
V2889500
V2993400
V2993400
VI 486800
VG181900
HF757150
HF756270
HF758390
--
HF757150
HF756270
HF758390
PSR-550
8
RANK
R0300 Carbon Resistor 47.0 1/4 J 01
-0806 Carbon Resistor 10.0K 1/4 J 01
SW800 Slide Switch SSSF144-S06N-0 HOST SELECT 03
Z TH501 Protector Switch RUE250 2.50A 30V Overcurrent protection 03
TR621 Transistor 2SC 01
TR622 Transistor 2SC 01
W-ANA Connector Assembly ANA 4P (V381820)
W-DMV Connector Assembly DMV 5P (V381840)
W-EP2 Connector Assembly EP2 L=160 (V457700)
W-MID Connector Assembly MID 7P (V381870)
--
HF754470
HF756220
HF756220
HF755150
HF755150
HF757100
HF755560
HF757100
HF755560
HF756270
--
HF757220
HF755680
HF757180
HF755470
HF757180
HF756270
HF756270
--
HF757220
HF755680
HF757180
HF755470
HF757180
HF756270
HF757100
HF757180
HF756680
HF757180
HF756680
HF753220
HF753220
HF753220
HF753220
HF755100
HF755330
HF755100
HF755330
HF755220
HF756100
HF755220
HF755220
HF756150
HF757220
HF757220
HF757100
HF757100
HF757100
HF755220
HF755220
HF757100
HF757100
HF757100
HF755100
HF755100
HF757100
HF757100
HF755100
HF755100
HF757470
HF757470
VQ665200
VV458000
VS885800
VS885800
--
--
--
--
PSR-550
9
RANK
* Circuit Board DM (XZ670D0)
Bind Head Tapping Screw-B 3.0X8 MFZN2BL 2 01
C0208 Ceramic Capacitor-SL 27P 50V J 01
C0903 Electrolytic Cap. 1000 16.0V 01
V7019400
EP600190
VC694800
UR837100
VC694800
VC694800
UR837100
FG612470
FG612470
FG612100
VC694800
VC694800
FG612100
VC694800
FG612470
FG612470
FG612100
FG612100
FG612100
VC694800
VC694800
UR828100
VC694800
FG651270
VC694800
VC694800
VC694800
UR847100
VC694800
VC694800
UR828100
VC694800
UR837100
UR866470
VC694800
UA654220
UR837100
UR866470
VC694800
UA654220
UR828100
VC694800
UR828100
VC694800
UR837100
VC694800
VC694800
VC694800
VC694800
VC694800
VC694800
VC694800
VC694800
VC694800
UR837100
FG612100
FG612100
VC694800
UR837100
VC694800
FG644100
UR848100
UR839100
FG612330
FG644100
FG644100
UR847100
UR828100
FG644100
PSR-550
10
RANK
CA151 Ceramic Capacitor Array 100P 50V M 01
* CA171 Ceramic Capacitor Array 470P 50V M
CN850 Connector 34P TE 03
CN850 Connector Header 302A 34P TE 05
CN999 Connector Base Post PH 6P TE 01
D0901 Diode RK33 01
D0911 Diode 1SS133,1SS176 01
D0912 Diode 11ES4 01
D0931 Diode 1SS133,1SS176 01
* IC100 IC HD6437042AF90F CPU
IC190 IC IC-PST591D-2 SYSTEM RESET 02
IC200 IC HG73C205AFD TONE GENERATOR (SWX00B) 09
* IC230 IC MASK ROM 64M WAVE
IC250 IC S-81250SGY-Z REGULATOR +5V 02
IC260 IC MSM514260C-60TS-K DRAM 4M 16
IC260 IC SDM4260CLTM-6S 08
IC270 IC PCM1716E DAC 06
IC290 IC UPC29M33HF REGULATOR 03
IC300 IC MSM514260C-60TS-K DRAM 4M 16
IC300 IC SDM4260CLTM-6S 08
* IC310 IC MASK ROM 32M PROGRAM
IC330 IC UPD431000AGW-70LL SRAM 1M 07
IC330 IC M5M51008CFP-70H 07
IC350 IC TC74HC138AP DECODER 02
IC350 IC SN74HC138N 05
IC360 IC TC74HC32AP OR 03
IC500 IC TC74HC374AP D-FF 06
IC600 IC TC74HC138AP DECODER 02
IC800 IC HD63266F FDC 09
IC900 IC M5291P DC-DC CONVERTER 03
IC910 IC S-81250SGY-Z REGULATOR +5V 02
IS310 IC Socket DICF-42CS-E 03
L0252 Ferrite Bead EXC-ELDR35V 01
-0856 Ferrite Bead EXC-ELDR35V 01
L0901 Choke Coil 220U ELC15E221 15E 05
L0921 Coil SNT-D20TF 10uH 03
L0922 Coil SNT-D20TF 10uH 03
VC694800
VC694800
VH483900
VK994900
V4654200
VH285600
VH285600
VK025500
VK025100
VF728300
VK024800
VF728200
VK025200
VK025600
VQ391300
V3858700
VK024900
LB918030
LB918020
VB390200
V2320300
VB941200
VB481900
VB941200
XZ787100
XR902A00
XU947C00
XZ786100
XT625A00
XT810A00
XW125A00
XU829A00
XT333A00
XT810A00
XW125A00
XZ785200
XT138A00
XV976A00
I R013800
I R013850
I R003200
I R003250
I R037400
I R037450
I R013800
I R013850
I R037400
I R037450
XI 939A00
XV856A00
XT625A00
I R007400
I R007450
VK863100
--
VM898600
VM898600
VM898600
VM898600
VZ060700
VN381200
VN381200
HF755560
HF755220
HF756330
--
--
HF755220
HF757470
HF757470
PSR-550
11
RANK
-0274 Carbon Resistor 220.0 1/4 J 01
R0901 Metal Oxide Film Resistor 0.22 1W J 01
* R0992 Metal Oxide Film Resistor 39.0 1W J 01
* R0998 Metal Oxide Film Resistor 39.0 1W J
RA111 Resistor Array RGLE4X473J 01
TA610 Transistor Array TD62785P SOURCE 04
TR511 Digital Transistor DTC123JS TP 01
-515 Digital Transistor DTC123JS TP 01
TR901 Transistor 2SA2006 E,F 02
TR998 Transistor 2SC3581 E 01
HF757470
HF757470
HF755100
HF756100
HF756100
HF758470
HF758470
HF757100
HF757100
HF756100
HF756100
HF757470
HF756100
HF756100
HF755100
HF755100
HF757470
HF757470
HF757100
HF757100
HF754680
HF757470
HF757470
HF754330
HF756100
HF755220
HF755220
--
HF755180
HF755180
HF755100
HF755100
HF755100
HF754470
HF754470
HF757100
HF756100
HF756100
HF757470
HF757470
HF755220
HF755220
HF757100
HF756100
HF756100
VC722800
HF756120
HF756390
VC731200
HF755330
HF756100
HF757220
HF757390
V3733100
HF755100
HF756220
HF757100
HF756220
HF757100
V3733100
VP939900
VF773900
VH307000
VH307000
VF773900
VH885000
VK165500
VK165500
V3795100
V3375500
PSR-550
12
RANK
TR999 Transistor 2SC3581 E 01
X0100 Ceramic Resonator 7MHz EFOMC7004A4 01
X0200 Quartz Crystal Unit DOC-49S5 05
X0800 Ceramic Resonator 16MHz EFOEX1605X4 01
ZD911 Zener Diode MTZ J 10.0B 10.0V 01
ZD911 Zener Diode MTZJ10B 10.0V 01
Circuit Board MK-H (XR565C0) 09
Wire Trap 52147 12P TE 01
Diode 1N4148(DO-34) 01
Circuit Board MK-L (XR564C0) 09
Diode 1N4148(DO-34) 01
* Circuit Board MKS5 (XZ594A0)
Vibration-proof Tape 10X64X0.5 (VK34680)
-3 Ceramic Capacitor-SL 22P 50V J 01
-3 Ceramic Capacitor-SL 22P 63V J 01
CA1 Ceramic Capacitor Array 100P 50V K 02
CA2 Ceramic Capacitor Array 100P 50V K 02
* CL1 Ceramic Resonator 5.00M EF0EC5004T4Q
* IC1 IC UPD789022GB-A15-8E CPU
* Circuit Board PN (XV934B0)
D0301 Diode 1SS133,1SS176 01
-0304 Diode 1SS133,1SS176 01
IC100 IC S6A0069X10-Q0RJ LCD DRIVER 05
IC200 IC S6A0065B01-Q0RJ LCD DRIVER 04
LE102 LED Green SLZ290B-03-T2 DISK IN USE 01
LE103 LED Red SLZ-190B-11-T1 VOICE L 01
LE104 LED Red SLZ-190B-11-T1 VOICE R1 01
LE105 LED Red SLZ-190B-11-T1 VOICE R2 01
LE201 LED Red SLZ-190B-01 ONE TOUCH SETTING 01
LE202 LED Green SLZ-290B-10-T2 SONG START/STOP 01
LE203 LED Red SLZ-190B-10-T2 SYNC START 01
LE204 LED Red SLZ-190B-10-T2 SYNC STOP 01
V3375500
V3797500
VV345500
V3681400
VG439500
VQ296000
VV583900
VK025600
VK024900
VV437800
VV583800
VK025600
VK025100
VV437800
V7112200
--
--
FG651220
FG651220
VR027400
VR027400
UR828100
VC694800
VM902400
VP755200
VP755200
V6781400
VF728300
VK025600
VK025100
VK024900
XZ560100
HF456470
HF457470
VL631400
VL632600
VH373200
V7019600
--
VC694800
VC694800
VK994900
VK994900
VI 879000
LB918020
VI 878600
VI 878900
VI 878800
VK024700
VK024700
VI 878100
VI 878100
VI 878400
VI 878300
VB941200
VB941200
XV226A00
XV933A00
VG778600
VI 100100
VI 100100
VI 100100
VC341300
V3621200
VT387900
VT387900
PSR-550
13
RANK
LE205 LED Red SLZ-190B-01 ACCOMPANIMENT 01
LE301 LED Green SLZ-290B-10-T2 REGISTRATION MEMORY 01
LE302 LED Red SLZ-190B-10-T2 ENDING/rit. 01
LE303 LED Red SLZ-190B-10-T2 MAIN/AUTO FILL B 01
LE304 LED Red SLZ-190B-10-T2 MAIN/AUTO FILL A 01
LE305 LED Red SLZ-190B-10-T2 INTRO 01
LE401 LED Red SLZ-190B-10-T2 FREEZE 01
LE402 LED Red SLZ-190B-11-T1 ACMP ON/OFF 01
LE403 LED Red SLZ-190B-11-T1 RECORD 01
LE404 LED Red SLZ-190B-06-T2 VOICE CHANGE 01
LE405 LED Red SLZ-190B-06-T2 MIXER 01
RA101 Resistor Array RGLE5V222J 01
RE602 Encoder REB161 PVB 15F DATA Dial 03
Z SW700 Push Switch SDDLB1 J,UC,CEE STANDBY/ON 03
VR603 Rotary Variable Resistor B10K EVJ05DF25B14 PITCH BEND 03
VR800 Rotary Variable Resistor A10.0K XV0141GPVN2 MASTER VOLUME 02
W-ENC Connector Assembly ENC 3P (V381800)
W-LCD Connector Assembly LCD 12P (V445890)
W-MVR Connector Assembly MVR 5P (V381830)
W-PIT Connector Assembly PIT 3P (V381810)
W-PND Connector Assembly PND 8P (V381880)
W-PNL Connector Assembly PNL 10P (V381890)
W-PNS Connector Assembly PNS 11P (V381900)
W-STB Connector Assembly STB 6P (V381850)
Speaker 3.0cm TWEETER 2 02
Speaker 12.0cm 4 ohm 6W WOOFER 2 06
* LCD TTR
* Back-lit Assembly PT
Floppy Disk Drive 3.5inch DF354H 13
VC341300
V3621200
VT387900
VT387900
VT387900
VT387900
VT387900
VI 100100
VI 100100
VR699900
VR699900
HF757910
--
HF754100
HF754100
V5302400
VU481300
VY980400
VT432100
VZ048400
--
--
--
--
--
--
--
--
XV948A00
XT278A00
V7126700
V7042500
V6492300
A B C D E F G H I J K L
1
2
3
4
5
6
7
8
PSR-550
I PSR-550 OVERALL CIRCUIT DIAGRAM 1/2 (DM)
to PN 1/5-CN401
to AM-CN800
to MKS5-CN1
to BACK LIGHT ASS'Y
to PN 1/5-CN501
to PN 1/5-CN301
to PN 1/5-CN101
to AM-CN530
to PN 1/5-CN102
DM
to AM-CN100
FDD
CPU
SRAM 1M
DRAM 4M
MAIN ROM
32M
D-FF
OR
DECODER
D-FF
DECODER
D-FF
FDC
WAVE ROM
64M
DAC
SWX00B
DRAM 4M
REGULATOR
+3.3V
REGULATOR
+5V
DC-DC
CONVERTER
SYSTEM RESET
REGULATOR
+5V
28CC1-8819393 1
: Mylar Capacitor
: Ceramic Capacitor
: Semiconductive Ceramic Capacitor
: Metal Oxide Film Resistor
Note : See parts list for details of circuit board component parts.
1
2
3
4
5
6
7
8
A B C D E F G H I J K L
I PSR-550 OVERALL CIRCUIT DIAGRAM 2/2 (PN, AM, MKS5, MK-L, MK-H)
L
R
L
R
WOOFER
TWEETER
to DM-CN550
to DM-CN150
to DM-CN650
to DM-CN180
to DM-CN920
to
DM-CN250
to
DM-CN750
to
DM-CN960
PHONES/OUTPUT
to BATTERY
DC IN 10-12V
MIDI IN
MIDI OUT
TO HOST
PN 1/5
PN 2/5
PN 3/5
PN 4/5
PN 5/5
MK-H
MK-L
MKS5
to DM-CN170
FOOT
SWITCH
MASTER
VOLUME
STANDBY/ON
HOST SELECT
Data dial
PITCH BEND
AM
LCD BACK LIGHT
LCD
to DM-CN999
not installed not installed
+
LCD DRIVER
LCD DRIVER
HPF
EQUALIZER
AMP
POWER AMP
PHOTO CAUPLER
HOST I/F
LINETRANSCEIVE
INVERTER
REGULATOR
+6V
CPU
PN: 28CC1-8819394
AM: 28CC1-8813690
MK-H: 28CC1-8812655
MK-L: 28CC1-8812655
REGULATOR +6V
AN78L06 (XE924A00)
2
1
3
3: OUTPUT
2: GND
1: INPUT
REGULATOR +5V
S81250SGY-Z (XT625A00)
2
1
3
3: OUTPUT
2: INPUT
1: GND
REGULATOR +3.3V
PC29M33HF (XT333A00)
1
2
3 3: OUTPUT
2: COMMON
1: INPUT
: Mylar Capacitor
: Ceramic Capacitor
: Semiconductive Ceramic Capacitor
Note : See parts list for details of circuit board component parts.
WARNING
Components having special characteristics are marked Zand must be replaced with parts having speci-
fication equal to those originally installed.

PSR 550

Uploaded by

Copyright:

Available Formats

PSR 550

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

PSR 550

Uploaded by

Copyright:

Available Formats

SERVICE MANUAL

You might also like