VBT

VALENCE BOND THEORY (VBT) & HYBRIDIZATION
The valence bond theory was proposed by Heitler and London to explain the formation of covalent bond
quantitatively using quantum mechanics. Later on, Linus Pauling improved this theory by introducing the concept
of hybridization.
The main postulates of this theory are as follows:
* A covalent bond is formed by the overlapping of two half filled valence atomic orbitals of two different atoms.
* The electrons in the overlapping orbitals get paired and confined between the nuclei of two atoms.
* The electron density between two bonded atoms increases due to overlapping. This confers stability to the
molecule.
* Greater the extent of overlapping, stronger is the bond formed.
* The direction of the covalent bond is along the region of overlapping of the atomic orbitals i.e., covalent bond is
directional.
* There are two types of covalent bonds based on the pattern of overlapping as follows:
(i) -bond: The covalent bond formed due to overlapping of atomic orbital along the inter nucleus axis is called -
bond. It is a stronger bond and cylindrically symmetrical.
Depending on the types of orbitals overlapping, the -bond is divided into following types:
s-s
bond:

p-p
bond:

s-p
bond:

(ii) -bond: The covalent bond formed by sidewise overlapping of atomic orbitals is called - bond. In this bond, the
electron density is present above and below the inter nuclear axis. It is relatively a weaker bond since the electrons are
not strongly attracted by the nuclei of bonding atoms.

Note: The 's' orbitals can only form -bonds, whereas the p, d & f orbitals can form both and -bonds.

HYBRIDIZATION
What is hybridization?
The intermixing of two or more pure atomic orbitals of an atom with almost same energy to give same number of
identical and degenerate new type of orbitals is known as hybridization.
The new orbitals formed are also known as hybrid orbitals.
What is intermixing?
The intermixing or hybridization of atomic orbitals is a mathematical concept based on quantum mechanics. During
this process, the wavefunctions, of atomic orbitals of same atom are combined to give new wavefunctions
corresponding to hybrid orbitals.
What are the requirements for atomic orbitals to undergo hybridization?
* The atomic orbitals of same atom with almost same energy can only participate in the hybridization.
* The full filled or half filled or even empty orbitals can undergo hybridization provided they have almost equal energy.
Do the orbitals of different atoms undergo hybridization?
No! The hybridization is the mixing of orbitals of same atom only. The combination of orbitals belonging to different
atoms is called bonding.
What are hybrid orbitals? And what are its characteristics?
* The new orbitals that are formed due to intermixing of atomic orbitals are also known as hybrid orbitals, which have
mixed characteristics of atomic orbitals.
* The shapes of hybrid orbitals are identical. Usually they have one big lobe associated with a small lobe on the other
side.
* The hybrid orbitals are degenerate i.e., they are associated with same energy.
How many hybrid orbitals are formed?
* The number of hybrid orbitals formed is equal to the number of pure atomic orbitals undergoing hybridization.
E.g. If three atomic orbitals intermix with each other, the number of hybrid orbitals formed will be equal to 3.
How do the electrons are going to be filled in the hybrid orbitals?
* The hybrid orbitals are filled with those electrons which were present in the pure atomic orbitals forming them.
* The filling up of electrons in them follows Pauli's exclusion principle and Hund's rule.
What is the use of hybrid orbitals?
* The hybrid orbitals participate in the

bond formation with other atoms.
Why atomic orbitals in a given atom undergo hybridization?
* The hybrid orbitals are oriented in space so as to minimize repulsions between them. This explains why the atomic
orbitals undergo hybridization before bond formation.
The reason for hybridization is to minimize the repulsions between the bonds that are going to be formed by the
atoms by using hybrid orbitals.
Remember that the hybridization is the process that occurs before bond formation.
And finally:
* The bond angles in the molecule are equal to or almost equal to the angles between the hybrid orbitals forming the
bonds. The shape of the molecule is determined by the type of hybridization, number of bonds formed by them and the
number of lone pairs.

TYPES OF HYBRIDIZATION
During hybridization, the atomic orbitals with different characteristics are mixed with each other. Hence there is no
meaning of hybridization between same type of orbitals i.e., mixing of two 's' orbitals or two 'p' orbitals is not called
hybridization.
However orbital of 's' type can can mix with the orbitals of 'p' type or of 'd' type. Based on the type and number of
orbitals, the hybridization can be subdivided into following types.
Note: Keep in mind that - only the orbitals of nearer energy values can participate in the hybridization.
sp HYBRIDIZATION
* Intermixing of one 's' and one 'p' orbitals of almost equal energy to give two identical and degenerate hybrid orbitals
is called 'sp' hybridization.
* These sp-hybrid orbitals are arranged linearly at by making 180
o
of angle.
* They possess 50% 's' and 50% 'p' character.

sp
2
HYBRIDIZATION
* Intermixing of one 's' and two 'p' orbitals of almost equal energy to give three identical and degenerate hybrid
orbitals is known as sp
2
hybridization.
* The three sp
2
hybrid orbitals are oriented in trigonal planar symmetry at angles of 120
o
to each other.
* The sp
2
hybrid orbitals have 33.3% 's' character and 66.6% 'p' character.

sp
3
HYBRIDIZATION
* In sp
3
hybridization, one 's' and three 'p' orbitals of almost equal energy intermix to give four identical and
degenerate hybrid orbitals.
* These four sp
3
hybrid orbitals are oriented in tetrahedral symmetry with 109
o
28' angle with each other.
* The sp
3
hybrid orbitals have 25% s character and 75% 'p' character.

sp
3
d HYBRIDIZATION
* In sp
3
d hybridization, one 's', three 'p' and one 'd' orbitals of almost equal energy intermix to give five identical and
degenerate hybrid orbitals, which are arranged in trigonal bipyramidal symmetry.
Among them, three are arranged in trigonal plane and the remaining two orbitals are present above and below the
trigonal plane at right angles.
* The sp
3
d hybrid orbitals have 20% 's', 60% 'p' and 20% 'd' characters.

sp
3
d
2
HYBRIDIZATION
* Intermixing of one 's', three 'p' and two 'd' orbitals of almost same energy by giving six identical and degenerate
hybrid orbitals is called sp
3
d
2
hybridization.
* These six sp
3
d
2
orbitals are arranged in octahedral symmetry by making 90
o
angles to each other. This arrangement
can be visualized as four orbitals arranged in a square plane and the remaining two are oriented above and below this
plane perpendicularly.

sp
3
d
3
HYBRIDIZATION
* In sp
3
d
3
hybridization, one 's', three 'p' and three 'd' orbitals of almost same energy intermix to give seven
sp
3
d
3
hybrid orbitals, which are oriented in pentagonal bipyramidal symmetry.
* Five among the sp
3
d
3
orbitals are arranged in a pentagonal plane by making 72
o
of angles. The remaining are
arranged perpendicularly above and below this pentagonal plane.

VBT

Uploaded by

Copyright:

Available Formats

VBT

Uploaded by

Document Information

Original Description:

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

VBT

Uploaded by

Copyright:

Available Formats

What are the different types of hybridization discussed in the document?

What are the characteristics of sp3 hybridization?

VALENCE BOND THEORY (VBT) & HYBRIDIZATION

You might also like