Catalogue Rittal

2012 / 2013
C
a
t
a
l
o
g
u
e

3
3
RITTAL GmbH & Co. KG
Postfach 1662 D-35726 Herborn
Phone +49(0)2772 505-0 Fax +49(0)2772 505-2319
E-mail: [email protected] www.rittal.com
Enclosures
Power Distribution
Climate Control
IT Infrastructure
Software & Services
1
2
.
2
0
1
1

/

E
9
1
3
Rittal. Power and Vision!
Catalogue 33
Edition 2012 / 2013
ENCLOSURES POWER DISTRIBUTION CLIMATE CONTROL IT INFRASTRUCTURE SOFTWARE & SERVICES
Small enclosures............................................................ 27
Compact enclosures...................................................... 43
Wall-mounted network enclosures................................. 53
Enclosure systems......................................................... 69
Floor-standing network enclosures................................ 79
Server enclosures .......................................................... 91
Console systems/PC enclosure systems/IW.................. 97
Operating housings/support arm systems/stand systems. 113
Hygienic Design........................................................... 153
Stainless steel .............................................................. 159
Ex enclosures/EMC...................................................... 175
Outdoor enclosures ..................................................... 181
UPS Power Modular Concept ................................... 190
Power Distribution Rack............................................... 200
Power System Module ................................................. 201
Fuel cell system........................................................... 205
Cooling with ambient air .............................................. 211
Cooling units ................................................................ 231
Liquid cooling .............................................................. 251
IT cooling ..................................................................... 271
CS Outdoor climate control.......................................... 285
Climate control accessories......................................... 291
Wall-mounted/floor-standing network enclosures..... 53/79
Server enclosures .......................................................... 91
Power ........................................................................... 189
IT cooling ..................................................................... 271
Monitoring.................................................................... 577
Security solutions......................................................... 321
Software ....................................................................... 337
Service ......................................................................... 349
Quality management.................................................... 353
Enclosures ................................................................... 357
Monitoring.................................................................... 577
Human/machine interface............................................ 599
List of model numbers ................................................. 625
Index ............................................................................ 640
Enclosures from page 23
Power from page 189
Climate control from page 207
IT infrastructure from page 307
Software & services from page 333
System accessories from page 355
3
Dear Customer,
In 2011, Rittal can reflect on five very successful decades. For the past 50 years, we
have been redefining the future, in every project. Together with our customers, we have
developed an innovative, value-creating system with precise-fit solutions for almost every
information on Rittal The System.. Discover the many different facets of our unique
range of solutions that is unrivalled anywhere else. Each day, Rittal The System.,
with its coordinated modular system, facilitates innovative solutions with maximum cost
efficiency for companies of all sizes. Embark on a voyage of discovery. The future your
success starts right here.
Best wishes
Friedhelm Loh
Owner and CEO of the Friedhelm Loh Group
industry. The new Rittal Catalogue 33 2012/2013 contains more than 600 pages of detailed
4
1961: Series production of the very first standard enclosure, AE, begins.
5
Setting standards.
For 50 years, and well into the future.
To have been setting standards for 50 years, you not only need a good idea, but also the strength
and ambition to implement it consistently. Rittal had the idea of producing standardised enclosures for
its customers. This idea became a reality in 1961 with the very first standard enclosure AE, laying the
foundations for long-term success.
Today, Rittal are world market leaders. We do not see this as a reason to rest on our laurels, but rather
as an incentive for future outstanding achievements: By permanently improving our products and
services and constant, innovative collaboration with our customers.
6
1969: Development of the modular series enclosure system RS.
1985: Presentation of the perfect enclosure system PS 4000. With more than 7.1 million units sold, it becomes a global standard.
1999: Perfecting of the global standard PS 4000 and extending it to infinite possibilities with the Top enclosure system TS 8.
7
Perfect collaboration.
We attach great value to direct contact with our customers, with qualified employees who listen
attentively and understand your concerns. This is what enabled us to develop ground-breaking
product series such as the modular series enclosure system RS at an early stage, in collaboration
with our customers. This cooperation is based on our many years of expertise and the unstinting
willingness of our employees to acquire forward-thinking knowledge and implement it in a profes-
sional fashion. Our customers are still the most important source of new products and services.
We continue this dialogue enthusiastically throughout every phase of the process, from the initial
idea, to development of a solution, through to the use of our products.
8
1983: Development and production of enclosure cooling units
1992: Ground-breaking ProOzone initiative to develop the first CFC-free cooling units.
2002: Revolutionising enclosure climate control with cooling units in the TopTherm series with innovative air routing.
2010: Development of the TopTherm chiller as a new modular concept in machine and process cooling.
9
Always two steps ahead.
Rittal always offers solutions that make its customers business more efficient. One good example of
this is the problem of heat generation in enclosures as a result of electronic components. Rittal has
identified this problem and solved it by developing a wide range of climate control technologies.
Highly efficient and versatile. With every innovation, we set new trends: With energy-saving cooling
units with nano-technology, fan-and-filter units with innovative diagonal technology, modular recooling
systems and modern software tools.
10
1988: Start of enclosure production for network technology.
2000: Rittal IT racks with an extensive range of accessories for modern IT infrastructures.
2011: Modular, scalable system solution for complete data centres.
11
We are always there for you.
For years, we have seen increasing convergence between the IT and industrial markets.
Back in 1988, Rittal seized on this opportunity, and has since used its industrial expertise to tap
into global IT markets with the production of enclosures for modern network technologies. First,
our experience and competency from industry were transferred to the individual components for IT
use. From this, Rittal has continuously developed an unbeatable system solution with perfectly
coordinated products and processes. Today, not only can our customers rely on pioneering solutions
for super-efficient and reliable data centres, IT environments and infrastructures, but also on our
global presence and availability.
12
The future
13
The fact that we are not content to look to the past, but instead are always looking to the future,
has been pivotal to our success in recent decades. And the same goes for the next 50 years.
For Rittal, the future starts afresh with every project. Be it the development of new materials,
product improvements, process optimisations or investing in new production sites around the
globe, everything we do is to your benefit and your advantage.
begins today!
14
15
Faster.
For Rittal, being faster is not an empty promise, but a claim that is practised throughout every area
of the company, and that is linked to direct customer benefits:
Fast development of innovations, with short paths and fast decision-making
Fast tapping of new markets and industries
Fast, problem-free use of all products worldwide, thanks to national and international approvals
Fast individual solutions through direct product development in collaboration with customers
Faster thanks to a perfect interplay between development, engineering, products and service
Faster thanks to flexible project implementation with system solutions from a single source
16
Axia Award, Diesel Medal, Top Employer, Prize for Innovation these are just a few examples of what other people think of Rittal!
17
Better.
Many companies promise to be better. Rittal really is better. This isnt just an empty claim; it has been
confirmed by independent experts and selection jury members. They bear witness to our outstanding
innovations and corporate achievements with positive analyses and awards. Most important of all for
us, however, is the confirmation we get from our customers. For 50 years, they have been placing their
trust in us, and therefore play a large part in our current position as global market leaders.
The reasons for this are:
Better with powerful innovative strength and the associated safeguarding of competitive advantages
on the market
Better thanks to certified quality in management, production and environmental protection
Better thanks to rational production on state-of-the art, automated production lines
Better through targeted solutions that are designed to make our customers lives easier
Better thanks to the verifiable energy efficiency of our products with tangible cost savings
Better with outstanding education and training, and superbly trained staff
18
19
Worldwide.
One major advantage that our customers really appreciate is our global presence.
For more than 50 years we have been on hand to offer advice, assistance and products.
Around the globe. We call this healthy customer relationships. It helps our customers to success-
fully tap into new markets. A dynamic status quo that we will be further expanding in future.
The cornerstones of our global availability:
Worldwide thanks to outstanding logistics with 63 subsidiaries, 40 agencies, 100 warehouses
with a total storage area of more than 160,000 m2 worldwide
Worldwide thanks to production sites on 3 continents, in 10 state-of-the-art plants with a total
production area of more than 210,000 m2
Worldwide thanks to global service with 5 global support points, more than 250 service partners
and over 1,000 service engineers
Worldwide thanks to international expertise with country-specific know-how and cross-regional
approvals
20
21
Dynamic success.
Rittal a global success for more than 50 years is part of the dynamic Friedhelm Loh Group,
which invests continuously in new technologies and markets. It specialises in the invention,
development and production of customised products and system solutions. At the heart of its
success is a lively and exemplary corporate culture which is wholly committed to ethical, social
and environmental values with commercial responsibility.
The Friedhelm Loh Group includes the following specialists:
Rittal
The worlds leading system suppliers of
enclosures, power distribution, climate control,
IT infrastructure and software & services
Eplan
Software for global engineering solutions
Mind8
Solution providers for products that are available
in a large number of versions and which require
intensive explanation
Stahlo
A modern steel service centre
LKH
Processors of plastics in the hot pressing and
injection moulding fields
Wrz Energy
Combined heat and power (CHP) units
22
23
Enclosures
Small enclosures
Polycarbonate enclosures PK .....................................................................28
Aluminium enclosures GA...........................................................................32
Terminal boxes KL.......................................................................................34
E-Box EB .....................................................................................................37
Bus enclosures BG......................................................................................39
Compact enclosures
Compact enclosures AE..............................................................................44
Compact system enclosures CM................................................................48
Plastic enclosures KS..................................................................................50
Wall-mounted network enclosures
Wall-mounted enclosures............................................................................54
Enclosure systems
Baying systems TS 8...................................................................................70
Network distribution enclosures
Network enclosures TS 8.............................................................................80
Network enclosures TE 7000.......................................................................85
Distributor racks ..........................................................................................88
Server enclosures
Server enclosures TS 8 ...............................................................................92
Server enclosures TE 7000 .........................................................................95
Console systems/PC enclosure systems/IW
TopConsole system TP..............................................................................100
One-piece consoles TP.............................................................................106
Universal consoles TP...............................................................................107
PC enclosure systems...............................................................................108
Enclosure for tower PC..............................................................................109
Industrial Workstations ..............................................................................110
Operating housings/support arm systems/
stand systems
Comfort Panel ............................................................................................116
Optipanel ...................................................................................................118
Operating housings...................................................................................120
Support arm systems ................................................................................128
Stand systems ...........................................................................................147
Hygienic Design
Small and compact enclosures HD...........................................................154
Stainless steel
Enclosures.................................................................................................160
Support arm system CP-S.........................................................................168
Enclosure systems ....................................................................................170
Ex enclosures/EMC
Ex enclosures ............................................................................................176
EMC enclosures ........................................................................................178
Outdoor enclosures
Outdoor enclosures...................................................................................182
24
25
As system providers, Rittal are the worlds leading suppliers
of innovative enclosure and case technology. Rittal meets very high
standards of security, ergonomics, energy and cost efficiency.
Your benefits
Planning and engineering
Software tools for targeted planning and project management
Component library RiCAD 3D for efficient engineering
Products
Modular enclosure and case technology
Extensive Rittal system solutions for a high level of investment reliability
and maximum flexibility
Compatibility with all types of applications: Industrial, IT,
power distribution and climate control
A comprehensive range of system accessories for individual installation
and fast assembly
Service
Contiguous global delivery and service network
Comprehensive quality management
Our own accredited laboratories for tests, trials and protection category
verification
Global spare parts service
AE Laser Express Individual enclosures to order
Competency
in enclosure systems
26
27
Small enclosures
Polycarbonate enclosures PK
Polycarbonate enclosures PK .....................................................................28
Polycarbonate enclosures PK, accessories................................................31
Cast aluminium enclosures GA
Cast aluminium enclosures GA...................................................................32
Cast aluminium enclosures GA, accessories..............................................33
Terminal boxes KL
Terminal boxes KL.......................................................................................34
E-Box EB
E-Box EB .....................................................................................................37
Bus enclosures BG
Bus enclosures BG......................................................................................39
28 Rittal Catalogue 33/Enclosures
PK accessories Page 31 System accessories Page 355 Polyamide cable gland Page 519
Material:
Housing of fibre-glass
reinforced polyamide
Cover either transparent
(version .100) or grey (ver-
sion .000), made from fibre-
glass-reinforced polycar-
bonate
Cover screws from polyamide
Insulating bung from poly-
ethylene
All-round foamed-in PU seal
Colour:
RAL 7035
Protection category:
IP 66 to IEC 60 529
Supply includes:
Enclosure with cover
Cover screws
Insulating bungs for wall
mounting screws
Approvals:
UL
cUL
Bureau Veritas
Detailed drawing:
Available on the Internet.
Width mm 65 94 94 94 110 110 Page
Height mm 65 65 94 94 110 110
Depth mm 57 57 57 81 66 90
Model No. PK 9500.000 9502.000 9504.000 9505.000 9506.000 9507.000
Packs of 12 8 6 6 6 6
Cover
Transparent
Grey
Accessories
Support rail
TS 35/7.5
Installation in the width 12 9564.000 9564.000 9564.000 9564.000 31
Installation in the height 12 9564.000 9564.000 9564.000 9564.000 31
Wall mounting brackets 40 9583.000 9583.000 9583.000 9583.000 9583.000 9583.000 31
Turn-lock fastener 100 9582.000 9582.000 9582.000 9582.000 9582.000 9582.000 31
Hinges 10 sets 9580.000 9580.000 9580.000 9580.000 9580.000 9580.000 31
Width mm 130 130 130 130 130 130 Page
Height mm 94 94 94 94 130 130
Depth mm 57 57 81 81 75 75
Model No. PK 9508.100 9508.000 9509.100 9509.000 9510.100 9510.000
Packs of 4 4 4 4 4 4
Cover
Transparent
Grey
Accessories
Mounting plate
9545.000 9545.000 31
Packs of 10 10
Support rail
TS 35/7.5
Installation in the width 12 9565.000 9565.000 9565.000 9565.000 9565.000 9565.000 31
Installation in the height 12 9564.000 9564.000 9564.000 9564.000 9565.000 9565.000 31
Hinges 10 sets 9580.000 9580.000 9580.000 9580.000 9580.000 9580.000 31
Width mm 130 130 180 180 180 180 Page
Height mm 130 130 94 94 94 94
Depth mm 99 99 57 57 81 81
Model No. PK 9511.100 9511.000 9512.100 9512.000 9513.100 9513.000
Packs of 4 4 2 2 2 2
Cover
Transparent
Grey
Accessories
Mounting plate
9545.000 9545.000 31
Packs of 10 10
Support rail
TS 35/7.5
Hinges 10 sets 9580.000 9580.000 9580.000 9580.000 9580.000 9580.000 31
Width mm 180 180 180 180 180 180 Page
Height mm 110 110 110 110 110 110
Depth mm 90 90 111 111 165 165
Model No. PK 9514.100 9514.000 9515.100 9515.000 9516.100 9516.000
Packs of 2 2 2 2 2 2
Cover
Transparent
Grey
Accessories
Mounting plate
9547.000 9547.000 9547.000 9547.000 9547.000 9547.000 31
Packs of 10 10 10 10 10 10
Support rail
TS 35/7.5
Hinges 10 sets 9581.000 9581.000 9581.000 9581.000 9581.000 9581.000 31
Width mm 182 182 182 182 182 182 254 254 Page
Height mm 180 180 180 180 180 180 180 180
Depth mm 90 90 111 111 165 165 90 90
Model No. PK 9517.100 9517.000 9518.100 9518.000 9519.100 9519.000 9520.100 9520.000
Packs of 1 1 1 1 1 1 1 1
Cover
Transparent
Grey
Accessories
Mounting plate
9548.000 9548.000 9548.000 9548.000 9548.000 9548.000 9549.000 9549.000 31
Packs of 10 10 10 10 10 10 8 8
Support rail
TS 35/7.5
Installation in the width 12 9566.000 9566.000 9566.000 9566.000 9566.000 9566.000 9567.000 9567.000 31
Installation in the height 12 9566.000 9566.000 9566.000 9566.000 9566.000 9566.000 9566.000 9566.000 31
Wall mounting brackets 40 9583.000 9583.000 9583.000 9583.000 9583.000 9583.000 9583.000 9583.000 31
Turn-lock fastener 100 9582.000 9582.000 9582.000 9582.000 9582.000 9582.000 9582.000 9582.000 31
Hinges 10 sets 9581.000 9581.000 9581.000 9581.000 9581.000 9581.000 9581.000 9581.000 31
Width mm 254 254 254 254 360 360 360 360 Page
Height mm 180 180 180 180 254 254 254 254
Depth mm 111 111 165 165 111 111 165 165
Model No. PK 9521.100 9521.000 9522.100 9522.000 9523.100 9523.000 9524.100 9524.000
Packs of 1 1 1 1 1 1 1 1
Cover
Transparent
Grey
Accessories
Mounting plate
9549.000 9549.000 9549.000 9549.000 9550.000 9550.000 9550.000 9550.000 31
Packs of 8 8 8 8 4 4 4 4
Support rail
TS 35/7.5
Installation in the width 12 9567.000 9567.000 9567.000 9567.000 9568.000 9568.000 9568.000 9568.000 31
Installation in the height 12 9566.000 9566.000 9566.000 9566.000 9567.000 9567.000 9567.000 9567.000 31
Wall mounting brackets 40 9583.000 9583.000 9583.000 9583.000 9583.000 9583.000 9583.000 9583.000 31
Turn-lock fastener 100 9582.000 9582.000 9582.000 9582.000 9582.000 9582.000 9582.000 9582.000 31
Hinges 10 sets 9581.000 9581.000 9581.000 9581.000 9581.000 9581.000 9581.000 9581.000 31
PK accessories Page 31 System acessories Page 355 Polyamide cable gland Page 519
Material:
Housing and cover of fibre-
glass reinforced polyamide
Cover screws from polyamide
Insulating bung from poly-
ethylene
All-round foamed-in PU seal
Colour:
RAL 7035
IP 66 to IEC 60 529
Supply includes:
Cover screws
Insulating bung for wall
mounting screws
(not with PK 9530.000
and PK 9531.000)
Approvals:
UL
cUL
Bureau Veritas
Detailed drawing:
H
B
T
H
B
T
Width (B) mm 65 130 180 254 50 50 Page
Height (H) mm 65 94 110 180 52 65
Depth (T) mm 57 57 90 111 35 35
Model No. PK 9500.050 9508.050 9514.050 9521.050 9530.000 9531.000
Packs of 12 4 2 1 10 10
Cover
Transparent
Grey
No. of metric knockouts
M16/20 4 10
M20 16 24
M20/25 2
M25/32 4
M32/40 2 4
Cable gland for cable diameter
5 10 mm

Accessories
Mounting plate
9547.000 9549.000 31
Packs of 10 8
Support rail
TS 35/7.5
Installation in the width 12 9565.000 9566.000 9567.000 31
Installation in the height 12 9564.000 9564.000 9566.000 31
Wall mounting brackets 40 9583.000 9583.000 9583.000 9583.000 31
Turn-lock fastener 100 9582.000 9582.000 9582.000 9582.000 31
Hole patterns for metric knockout available on the Internet.
Accessories
Mounting plate
For universal interior installation.
Material:
2.5 mm melamine phenol-coated laminated
paper.
Colour:
RAL 7035
Supply includes:
Mounting plate
Self-tapping assembly screws
For enclosure
Width
mm
Height
mm
Packs of Model No. PK
PK 9510.000/.100, PK 9511.000/.100 110 110 10 9545.000
PK 9514.000/.100, PK 9514.050, PK 9515.000/.100, PK 9516.000/.100 150 90 10 9547.000
PK 9517.000/.100, PK 9518.000/.100, PK 9519.000/.100 150 150 10 9548.000
PK 9520.000/.100, PK 9521.000/.100, PK 9521.050, PK 9522.000/.100 220 150 8 9549.000
PK 9523.000/.100, PK 9524.000/.100 331 220 4 9550.000
Support rail
The support rail section provides good flexibility
for accommodating terminal blocks and installed
components.
Supply includes:
Support rails
Self-tapping assembly screws
Rail Rail length mm Packs of Model No. PK
TS 35/7.5
81 12 9564.000
106 12 9565.000
144 12 9566.000
216 12 9567.000
336 12 9568.000
Turn-lock fastener
A quick, convenient screw fastening aid is
obtained by clipping into the head of the lid
screw.
Material:
Polyamide
Colour:
Similar to RAL 7035
Supply includes:
1 pack = 100 pieces
For all enclosures 100 9582.000
Hinges
For hinged attachment of covers.
The supplied drilling template ensures problem-
free assembly.
Colour:
Similar to RAL 7035
Supply includes:
1 set =
2 hinges,
4 assembly screws,
4 polyethylene sealing bungs,
1 drilling template.
For enclosure Material Packs of Model No. PK
PK 9500.000/.100 PK 9513.000/.100 Polycarbonate 10 sets 9580.000
PK 9514.000/.100 PK 9524.000/.100 Polystyrene 10 sets 9581.000
Wall mounting brackets
The enclosure can be screwed to the wall using
four wall mounting brackets. The bracket is
securely attached to the enclosure by means of
pins.
Material:
Polyamide, grey
Colour:
Similar to RAL 7035
Supply includes:
1 pack = 40 pieces
For all enclosures 40 9583.000
GA accessories Page 33 System accessories Page 355
Material:
Enclosure: Cast aluminium
Cover: Cast aluminium,
all-round foamed-in PU seal
Surface finish:
Textured paint
Colour:
RAL 7001
IP 66 to IEC 60 529,
complies with NEMA 4.
Supply includes:
Cover screws, captive
Screws for attaching support
rails
Screw for connection of the
PE conductor
Detailed drawing:
Width mm 50 58 98 150 75 125 175 250 122 Page
Height mm 45 64 64 64 80 80 80 80 120
Depth mm 30 34 35 35 57 57 57 57 80
Model No. GA 9100.210 9101.210 9102.210 9103.210 9104.210 9105.210 9106.210 9107.210 9108.210
Packs of 6 5 3 2 1 1 1 1 1
Accessories
Mounting plate
9105.700 9108.700 33
Packs of 10 2
Support rail TS 35, length 2 m see page 467
Wall mounting brackets 2 9121.122 33
Hinge, exterior 2 9123.000 33
Earth straps see page 501
Cable gland see page 519
Width mm 220 360 160 260 360 202 280 334 330 Page
Height mm 120 120 160 160 160 232 232 233 230
Depth mm 91 82 91 91 91 111 111 111 181
Model No. GA 9110.210 9111.210 9112.210 9113.210 9114.210 9116.210 9117.210 9118.210 9119.210
Packs of 1 1 1 1 1 1 1 1 1
Accessories
Mounting plate
9110.700 9112.700 9113.700 9114.700 9116.700 9117.700 9118.700 9118.700 33
Packs of 2 2 2 1 1 1 1 1
Wall mounting brackets 2 9121.122 9121.122 9121.160 9121.160 9121.160 9121.230 9121.230 9121.230 9121.230 33
Hinge, exterior 2 9123.000 9123.000 9123.000 9123.000 9123.000 9123.000 9123.000 9123.000 9123.000 33
Accessories
Mounting plate
For universal interior installation, with mounting
holes.
Material:
Sheet steel, zinc-plated
Exterior dimensions mm
For GA enclosures Packs of Model No. GA
Width Height
114 69 9105.210 10 9105.700
109 107 9108.210 2 9108.700
207 107 9110.210 2 9110.700
144 142 9112.210 2 9112.700
245 142 9113.210 2 9113.700
346 142 9114.210 1 9114.700
183 214 9116.210 1 9116.700
264 214 9117.210 1 9117.700
314 214 9118.210/9119.210 1 9118.700
Wall mounting bracket
For external mounting on surfaces no need to
dismantle the cover if pre-assembled.
Material:
9108.210/
9110.210/
9111.210
2 9121.122
9112.210/
9113.210/
9114.210
2 9121.160
9116.210/
9117.210/
9118.210/
9119.210
2 9121.230
Hinge, exterior
For fastening the cover to the enclosure base.
Material:
Die-cast aluminium
Colour:
RAL 7001
9108.210/
9110.210/
9111.210/
9112.210/
9113.210/
9114.210/
9116.210/
9117.210/
9118.210/
9119.210
2 + 8 screws 9123.000
Terminal boxes KL
System accessories Page 355 KL stainless steel Page 161 KL for Ex areas Page 176
Material:
Enclosure: Sheet steel
Cover: Sheet steel, all-round
foamed-in PU seal
Surface finish:
Enclosure and cover: Dipcoat-
primed, powder-coated on the
outside, textured paint
Colour:
RAL 7035
Without gland plate:
IP 66 to IEC 60 529,
With gland plate:
IP 55 to IEC 60 529,
Supply includes:
Quick-action screw including
plastic bushes
For enclosures with gland
plate plus sheet steel gland
plates with seals and assem-
bly parts
Approvals
UL
CSA
TV
Germanischer Lloyd
Russian Maritime Register of
Shipping
Lloyds Register of Shipping
Bureau Veritas
VDE
Detailed drawing:
Width mm Packs of 150 200 200 300 300 400 Page
Height mm 150 150 200 150 200 200
Depth mm 80 80 80 80 80 80
Material thickness mm
Enclosure 1.25 1.25 1.25 1.25 1.25 1.25
Cover 1.25 1.25 1.25 1.25 1.25 1.25
Model No. KL 1 1514.510 1528.510 1516.510 1515.510 1517.510 1518.510
Weight (kg) 1.4 1.6 1.9 2.1 2.6 3.2
Gland plate
Accessories
Mounting plate 1 1560.700 1575.700 1562.700 1561.700 1563.700 1564.700 443
Support rail TS 35/7.5 10 2314.000 2315.000 2315.000 2316.000 2316.000 2317.000 467
Support rail TS 35/15 10 467
Cover retainer 3 pairs 1591.000 1591.000 1591.000 1591.000 1591.000 1591.000 425
Cover hinge 6 1592.000 1592.000 1592.000 1592.000 1592.000 1592.000 425
Earthing kit 5 2570.100 2570.100 2570.100 2570.100 2570.100 2570.100 503
with 8 mm distance from wall
4 1590.000 1590.000 1590.000 1590.000 1590.000 1590.000 439
Spare quick-release fastener for KL 12 1593.000 1593.000 1593.000 1593.000 1593.000 1593.000
Terminal boxes KL
Width mm Packs of 150 200 200 300 300 300 300 300 Page
Height mm 150 150 200 150 150 200 200 300
Depth mm 120 120 120 120 120 120 120 120
Material thickness
mm
Enclosure 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.38
Cover 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.25
Model No. KL 1 1500.510 1529.510 1502.510 1501.510 1530.510 1503.510 1531.510 1507.510
Gland plate
Weight (kg) 1.6 1.8 2.3 2.6 2.7 3.0 3.3 4.0
Accessories
Gland plate
(top + bottom)
Size 2 2
Qty. 1 + 1 1 + 1
Gland plate
(left + right)
Size
Qty.
Mounting plate 1 1560.700 1575.700 1562.700 1561.700 1561.700 1563.700 1563.700 1567.700 443
Support rail TS 35/7.5 10 2314.000 2315.000 2315.000 2316.000 2316.000 2316.000 2316.000 2316.000 467
Cover retainer 3 pairs 1591.000 1591.000 1591.000 1591.000 1591.000 1591.000 1591.000 1591.000 425
Cover hinge 6 1592.000 1592.000 1592.000 1592.000 1592.000 1592.000 1592.000 1592.000 425
Earthing kit 5 2570.100 2570.100 2570.100 2570.100 2570.100 2570.100 2570.100 2570.100 503
4 1590.000 1590.000 1590.000 1590.000 1590.000 1590.000 1590.000 1590.000 439
Spare quick-release fastener
for KL
12 1593.000 1593.000 1593.000 1593.000 1593.000 1593.000 1593.000 1593.000
Width mm Packs of 300 400 400 400 400 400 400 400 Page
Height mm 300 150 200 200 300 300 400 400
Depth mm 120 120 120 120 120 120 120 120
Material thickness
mm
Enclosure 1.38 1.25 1.25 1.25 1.38 1.38 1.38 1.38
Cover 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.25
Model No. KL 1 1535.510 1589.510 1504.510 1532.510 1508.510 1536.510 1511.510 1539.510
Gland plate
Weight (kg) 4.5 3.2 3.6 4.0 4.8 5.2 6.2 6.7
Accessories
Gland plate
(top + bottom)
Size 2 2 2 2
From
514
Qty. 1 + 1 1 + 1 1 + 1 1 + 1
Gland plate
(left + right)
Size 2 2 2
From
514
Qty. 1 + 1 1 + 1 1 + 1
Mounting plate 1 1567.700 1576.700 1564.700 1564.700 1568.700 1568.700 1571.700 1571.700 443
Support rail TS 35/7.5 10 2316.000 2317.000 2317.000 2317.000 2317.000 2317.000 2317.000 2317.000 467
Cover retainer 3 pairs 1591.000 1591.000 1591.000 1591.000 1591.000 1591.000 1591.000 1591.000 425
Cover hinge 6 1592.000 1592.000 1592.000 1592.000 1592.000 1592.000 1592.000 1592.000 425
Earthing kit 5 2570.100 2570.100 2570.100 2570.100 2570.100 2570.100 2570.100 2570.100 503
4 1590.000 1590.000 1590.000 1590.000 1590.000 1590.000 1590.000 1590.000 439
Spare quick-release fastener
for KL
12 1593.000 1593.000 1593.000 1593.000 1593.000 1593.000 1593.000 1593.000
Rittal Australia
RITTAL Pty. Ltd.
130 140 Parraweena Road
Miranda NSW 2228
Phone: +61 (2) 9525 2766
Fax: +61 (2) 9525 2888
E-mail: [email protected] www.rittal.com.au
Terminal boxes KL
Width mm Packs of 500 500 500 500 Page
Height mm 200 200 300 300
Depth mm 120 120 120 120
Enclosure 1.25 1.25 1.38 1.38
Cover 1.25 1.25 1.25 1.25
Model No. KL 1 1505.510 1533.510 1509.510 1537.510
Gland plate
Weight (kg) 4.4 4.9 5.8 5.2
Accessories
Gland plate
(top + bottom)
Size 2 2
From 514
Qty. 2 + 2 2 + 2
Gland plate
(left + right)
Size 2
From 514
Qty. 1 + 1
Mounting plate 1 1565.700 1565.700 1569.700 1569.700 443
Support rail TS 35/15 10 2318.000 2318.000 2318.000 2318.000 467
Cover retainer 3 pairs 1591.000 1591.000 1591.000 1591.000 425
Cover hinge 6 1592.000 1592.000 1592.000 1592.000 425
Earthing kit 5 2570.100 2570.100 2570.100 2570.100 503
4 1590.000 1590.000 1590.000 1590.000 439
Spare quick-release fastener for KL 12 1593.000 1593.000 1593.000 1593.000
Rittal Portugal
RITTAL Sistemas Elctricos
e Elctrnicos, Lda.
Z. I. de Rio Meo Rua 8, no 228
4520-475 Rio Meo Sta Maria da Feira
Phone: +351 25678 0210
Fax: +351 25678 0219
E-mail: [email protected] www.rittal.pt
E-Box EB
System accessories Page 355 E-Box EMC-shielded Page 178
Material:
Door: Sheet steel, all-round
foamed-in PU seal
Surface finish:
Enclosure and door: Dipcoat-
Mounting plate: Zinc-plated
Colour:
RAL 7035
IP 66 to IEC 60 529,
Supply includes:
Enclosure with hinged door
180 hinge
Cam lock with double-bit
insert
Mounting plate
Approvals:
UL
CSA
TV
Germanischer Lloyd
Russian Maritime Register of
Shipping
Bureau Veritas
VDE
Detailed drawings:
G
F
H
B
T
Depth 120 mm
Width (B) mm Packs of 150 150 200 200 200 300 300 200 Page
Height (H) mm 150 300 200 300 400 300 400 500
Depth (T) mm 120 120 120 120 120 120 120 120
Mounting plate width (F) mm 125 125 175 175 175 275 275 175
Mounting plate height (G) mm 135 285 185 285 385 285 385 485
Material thickness
mm
Enclosure 1.25 1.25 1.25 1.25 1.25 1.38 1.38 1.25
Door 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.25
Model No. EB 1 1553.500 1548.500 1549.500 1554.500 1550.500 1555.500 1556.500 1557.500
Weight (kg) 2.0 3.0 2.8 3.6 5.0 5.0 6.4 6.2
Accessories
4 1590.000 1590.000 1590.000 1590.000 1590.000 1590.000 1590.000 1590.000 439
Pole clamp 1 set 2584.000 2584.000 2584.000 2584.000 2584.000 2584.000 2584.000 2584.000 441
Mounting clip 30 2309.000 2309.000 2309.000 2309.000 2309.000 2309.000 2309.000 2309.000 467
Alternative lock systems see page 411
E-Box EB
Depth 155 mm
Width (B) mm Packs of 300 300 300 Page
Height (H) mm 400 600 800
Depth (T) mm 155 155 155
Mounting plate width (F) mm 275 275 275
Mounting plate height (G) mm 385 585 785
Material thickness
mm
Enclosure 1.38 1.38 1.38
Door 1.25 1.25 1.25
Model No. EB 1 1577.500 1578.500 1579.500
Weight (kg) 7.1 11.0 13.2
Accessories
4 1590.000 1590.000 1590.000 439
Pole clamp 1 set 2584.000 2584.000 2584.000 441
Mounting clip 30 2309.000 2309.000 2309.000 467
Rittal Brazil
RITTAL Sistemas Eletromecnicos Ltda.
Av. Cndido Portinari, 1174
VI Jaguara 05114-001 So Paulo-SP
Phone: +55 (11) 3622 2377
Fax: +55 (11) 3622 2399
E-mail: [email protected] www.rittal.com.br
Bus enclosures BG
System accessories Page 355
Material:
Door: Sheet steel with poly-
carbonate viewing window,
4 mm
Surface finish:
Enclosure and door:
Dipcoat-primed, powder-coated,
textured paint
Colour:
RAL 7035
IP 65 to IEC 60 529,
Supply includes:
Enclosure with door
Viewing window in the door
Product-specific supply
scope, see tables
Approvals:
TV
VDE
UL
cUL
Detailed drawings:
Height mm 300 300 300 300
Depth mm 80 80 80 80
Model No. BG 1 1583.520 1584.520 1585.520 1586.520
Enclosure 1.25 1.25 1.25 1.25
Door 1.25 1.25 1.25 1.25
Product-specific supply scope
Door hinge Left Left Left Left
Cam lock with double-bit insert 1 1 1 1
Support rail TS 35/7.5 2 2 2 2
Number of metric holes
M12 2 2 2 3
M20 5 9 13 24
M25 2 2 3
Accessories
Lock cover 1 2476.000 2476.000 2476.000 2476.000 423
Cable glands see page 519
Wall mounting bracket see page 439
Pole clamp see page 441
Bus enclosures BG
Width mm Packs of 200 400 Page
Height mm 300 300
Depth mm 120 120
Model No. BG 1 1605.520 1606.520
Enclosure 1.25 1.38
Door 1.25 1.25
Door hinge Right Right
Cam lock with double-bit insert 1 1
Support rail TS 35/7.5 1 1
Number of metric holes
M12 2
M20 2
M32 5 9
M50 1
Accessories
Lock cover 1 2476.000 2476.000 423
Height mm 200 200
Depth mm 125 125
Model No. BG 1 1558.510 1559.510
Enclosure 1.25 1.25
Door 1.25 1.25
Door hinge Bottom Bottom
Quick-release fastener 2 3
Gland plate in base 1 1
Accessories
Height mm 300 300 300 300 300 300
Depth mm 155 155 155 155 155 155
Mounting plate width 385 385 385 385 385 385
Mounting plate height 275 275 275 275 275 275
Model No. BG 1 1577.500 1577.520
1)
1577.530
1)
1577.550
1)
1577.560
1)
1577.450
1)

Enclosure 1.38 1.38 1.38 1.38 1.38 1.38
Door 1.25 1.25 1.25 1.25 1.25 1.25
Door hinge Bottom Bottom Bottom Bottom Bottom Bottom
Cam lock with double-bit insert 1 1 1 1 1 1
Viewing window
Size mm 340 x 115 340 x 190 340 x 115 340 x 190 340 x 155
Position
2)
mm 92 42 92 42 92
Mounting plate 1 1 1 1 1 1
Accessories
Lock cover 1 2476.000 2476.000 2476.000 2476.000 2476.000 2476.000 423
1)
Extended delivery times.
2)
Bottom edge of window to bottom edge of door
Bus enclosures BG
Height mm 300 300 300 300 300 300
Depth mm 155 155 155 155 155 155
Model No. BG 1 1578.500 1578.520
1)
1578.530
1)
1578.550
1)
1578.560
1)
1578.450
1)

Enclosure 1.38 1.38 1.38 1.38 1.38 1.38
Door 1.25 1.25 1.25 1.25 1.25 1.25
Viewing window
Size mm 540 x 115 540 x 190 540 x 115 540 x 190 540 x 155
Position
2)
mm 92 42 92 42 92
Accessories
Lock cover 1 2476.000 2476.000 2476.000 2476.000 2476.000 2476.000 423
1)
2)
Height mm 300 300 300 300 300 300
Depth mm 155 155 155 155 155 155
Model No. BG 1 1579.500 1579.520
1)
1579.530
1)
1579.550
1)
1579.560
1)
1579.450
1)

Enclosure 1.38 1.38 1.38 1.38 1.38 1.38
Door 1.25 1.25 1.25 1.25 1.25 1.25
Viewing window
Size mm 740 x 115 740 x 190 740 x 115 740 x 190 740 x 155
Position
2)
mm 92 42 92 42 92
Accessories
Lock cover 1 2476.000 2476.000 2476.000 2476.000 2476.000 2476.000 423
1)
2)
Height mm 500 300
Depth mm 160 120
Model No. BG 1 1611.510 1609.510
Enclosure 1.38 1.38
Door 1.5 1.25
Door hinge Right Bottom
Cam lock with double-bit insert 1
Quick-release fastener 2
Number of drilled holes for PG 13.5 or M20 33 48
Accessories
Lock cover 1 2476.000 423
42
43
Compact enclosures
Compact enclosures AE
Compact enclosures AE..............................................................................44
Compact system enclosures CM
Width: 600 800 mm, height: 800 1200 mm............................................48
Width: 1000 1200 mm, height: 1000 1400 mm......................................49
Plastic enclosures KS
Plastic enclosures KS..................................................................................50
System accessories Page 355 AE stainless steel Page 162 AE IP 69K Page 165 AE EMC-shielded Page 179 Hygienic Design Page 154
Material:
Door: Sheet steel, all-round
foamed-in PU seal
Surface finish:
Enclosure and door:
Dipcoat primed, powder-
coated on the outside,
textured paint
Colour:
RAL 7035
See tables.
Supply includes:
Enclosure with hinged
door(s), of all-round solid
construction
Gland plate(s) in enclosure
base
For single-door enclosures,
door hinged on right,
may be swapped to left
(except with AE 1032.500
and AE 1035.500)
With cam lock or 3-point lock
system
Mounting plate
Approvals:
UL
CSA
TV
Germanischer Lloyd
Russian Maritime
Register of Shipping
Bureau Veritas
VDE
Detailed drawings:
B
T
H
F
G
Width (B) mm Packs of 200 200 300 300 380 380 380 Page
Height (H) mm 300 300 300 400 300 300 380
Depth (T) mm 120 155 210 210 155 210 210
Mounting plate width (F) mm 162 162 254 254 334 334 334
Mounting plate height (G) mm 275 275 275 375 275 275 355
Material thickness
mm
Enclosure 1.25 1.25 1.38 1.38 1.38 1.38 1.38
Door 1.5 1.5 1.5 1.5 1.5 1.5 1.5
Mounting plate thickness mm 2.0 2.0 2.0 2.0 2.0 2.0 2.0
Cam lock 1 1 1 1 1 1 1
Model No. AE 1 1032.500 1035.500 1033.500 1034.500 1030.500 1031.500 1380.500
Weight (kg) 4.0 4.5 7.0 8.8 7.4 7.5 9.8
Protection category IP 66 to IEC 60 529, complies with NEMA 4.
Accessories
Gland plate
Size 1 1 3 3 3
From
514
Qty. 1 1 1 1 1 1 1
Rails for interior installation 4 2373.210 2373.210 2373.210 2373.210 459
for external mounting
4 2508.100 2508.100 2508.100 2508.100 2508.100 2508.100 2508.100 439
Baying kit 1 set 1199.100 1199.100 1199.100 1199.100 1199.100 1199.100 1199.100 400
Door stay 5 2519.000 2519.000 2519.000 2519.000 2519.000 429
180 hinges 2 2449.000 2449.000 2449.000 2449.000 2449.000 2449.000 2449.000 425
Rain canopies
Sheet steel 1 2501.500 2501.500 431
Stainless steel 1 2470.000 2361.000 2361.000 2471.000 2472.000 2472.000 431
LED system light see page 494
Wiring plan pocket, plastic see page 428
Width (B) mm Packs of 380 380 400 500 500 500 Page
Height (H) mm 600 600 500 500 500 700
Depth (T) mm 210 350 210 210 300 250
Mounting plate width (F) mm 334 334 354 449 449 449
Mounting plate height (G) mm 570 570 475 470 470 670
Material thickness
mm
Enclosure 1.38 1.5 1.38 1.38 1.5 1.5
Door 1.5 1.5 1.5 1.75 1.75 2.0
Mounting plate thickness mm 2.5 2.5 2.0 2.5 2.5 2.5
Cam lock 2 2 2 2 2 2
Model No. AE 1 1038.500 1338.500 1045.500 1050.500 1350.500 1057.500
Weight (kg) 15.6 19.4 13.0 16.8 19.6 31.2
Accessories
Gland plate
Size 3 4 4 4 4 4
From
514
Qty. 1 1 1 1 1 1
Rails for interior installation 4 2373.210 2373.350 2373.210 2373.210 2373.300 2373.250 459
4 2508.100 2508.100 2508.100 2508.100 2508.100 2508.100 439
Baying kit 1 set 1199.100 1199.100 1199.100 1199.100 1199.100 1199.100 400
Door stay 5 2519.000 2519.000 2519.000 2519.000 2519.000 2519.000 429
180 hinge 2 2449.000 2449.000 2449.000 2449.000 2449.000 2449.000 425
Support strips 20 2325.000 2325.000 2325.000 426
Rain canopies
Sheet steel 1 2501.500 431
Stainless steel 1 2472.000 2362.000 431
Dust guard trim see page 432
Width (B) mm Packs of 600 600 600 600 600 600 600 600 600 Page
Height (H) mm 380 380 600 600 600 760 760 800 1000
Depth (T) mm 210 350 210 250 350 210 350 250 250
Mounting plate width (F) mm 549 549 549 549 549 549 549 549 539
Mounting plate height (G) mm 355 355 570 570 570 730 730 770 955
Material thickness
mm
Enclosure 1.38 1.5 1.38 1.5 1.5 1.38 1.5 1.5 1.5
Door 1.5 1.5 1.75 1.75 1.75 2.0 2.0 2.0 2.0
Mounting plate thickness mm 2.5 2.5 2.5 2.5 2.5 3.0 3.0 3.0 3.0
Cam lock 1 1 2 2 2 2 2 2 2
Model No. AE 1 1039.500 1339.500 1060.500 1054.500 1360.500 1076.500 1376.500 1058.500 1090.500
Weight (kg) 15.4 20.0 22.8 24.8 28.4 32.1 36.0 33.6 50.5
Accessories
Gland plate
Size 5 5 5 5 5 5 5 5 5
From
514
Qty. 1 1 1 1 1 1 1 1 1
Rails for interior installation 4 2373.210 2373.350 2373.210 2373.250 2373.350 2373.210 2373.350 2373.250 2373.250 459
4 2508.100 2508.100 2508.100 2508.100 2508.100 2508.100 2508.100 2508.100 2508.100 439
Baying kit 1 set 1199.100 1199.100 1199.100 1199.100 1199.100 1199.100 1199.100 1199.100 400
Door stay 5 2519.000 2519.000 2519.000 2519.000 2519.000 2519.000 2519.000 2519.000 2519.000 429
180 hinge 2 2449.000 2449.000 2449.000 2449.000 2449.000 2449.000 2449.000 2449.000 2449.000 425
Support strips 20 2326.000 2326.000 2326.000 2326.000 2326.000 2326.000 2326.000 2326.000 2326.000 426
Rain canopies
Sheet steel 1 2502.500 2511.500 2502.500 2511.500 2502.500 2511.500 431
Stainless steel 1 2473.000 2473.000 2473.000 431
Height (H) mm 1200 760 760 600 1000 1200
Depth (T) mm 300 210 300 300 300 300
Material thickness
mm
Enclosure 1.5 1.5 1.5 1.5 1.5 1.5
Door 2.0 2.0 2.0 2.0 2.0 2.0
Mounting plate thickness mm 3.0 3.0 3.0 2.5 3.0 3.0
Cam lock 2 2 2 2
3-point lock system
Model No. AE 1 1260.500 1077.500 1073.500 1055.500 1180.500 1280.500
Weight (kg) 55.0 40.0 44.5 33.9 57.0 70.0
Accessories
Gland plate
Size 5 5 5 5 5 5
From
514
Qty. 1 1 1 1 1 1
4 2508.100 2508.100 2508.100 2508.100 2508.100 2508.100 439
Baying kit 1 set 1199.100 1199.100 1199.100 400
Door stay 5 2519.000 2519.000 2519.000 2519.000 2519.000 2519.000 429
180 hinge 2 2449.000 2449.000 2449.000 2449.000 2449.000 2449.000 425
Support strips 20 2326.000 2327.000 2327.000 2328.000 2328.000 2328.000 426
Rain canopies, stainless steel 1 2474.000 2475.000 2475.000 2475.000 431
Base/plinths
Height 100 mm 1 2816.200 2818.200 369
Height 200 mm 1 2826.200 2828.200 369
Eyebolts 4 2509.000 2509.000 438
Width (B) mm Packs of 1000 1000 1000 1000 1000 Page
Height (H) mm 760 760 1000 1200 1400
Depth (T) mm 210 300 300 300 300
Mounting plate width (F) mm 944 944 939 940 940
Mounting plate height (G) mm 730 730 955 1155 1355
Material thickness
mm
Enclosure 1.5 1.5 1.5 1.5 1.5
Door 2.0 2.0 2.0 2.0 2.0
Mounting plate thickness mm 3.0 3.0 3.0 3.0 3.0
Cam lock 2 2 2
3-point lock system
Model No. AE 1 1100.500 1130.500 1110.500 1213.500 1114.500
Door(s) 2 2 2 2 2
Weight (kg) 52.0 56.0 71.0 85.0 97.0
Accessories
Gland plate
Size 4 4 4 4 4
From
514
Qty. 2 2 2 2 2
Rails for interior installation 4 2373.210 2373.300 2373.300 2373.300 2373.300 459
4 2508.100 2508.100 2508.100 2508.100 2508.100 439
Baying kit 1 set 1199.100 1199.100 400
Door stay 5 2519.000 2519.000 2519.000 2519.000 2519.000 429
180 hinge 2 2449.000 2449.000 2449.000 2449.000 2449.000 425
Support strips 20 2325.000 2325.000 2325.000 2325.000 2325.000 426
Rain canopies, stainless steel 1 2363.000 2363.000 2363.000 2363.000 431
Base/plinths
Height 100 mm 1 2801.200 2801.200 2801.200 2801.200 369
Height 200 mm 1 2802.200 2802.200 2802.200 2802.200 369
Eyebolts 4 2509.000 2509.000 438
47
Compact system enclosures Rittal CM
System accessories Page 355 System lights Page 491 Cable duct Page 526 Climate control Page 207
Material:
Enclosure: Sheet steel,
1.5 mm
Door: Sheet steel, 2.0 mm,
Mounting plate: Sheet steel,
3.0 mm
Surface finish:
Enclosure and door:
Dipcoat-primed, powder-
textured paint
Colour:
RAL 7035
IP 55 to IEC 60 529,
complies with NEMA 12 pro-
vided suitable gland plates are
selected.
Supply includes:
Enclosure with hinged door(s)
R/h door hinge with single-
door enclosures, may be
swapped to opposite side
3-point lock
Mounting plate
Open base for individual
cable entry
Also required:
Gland plates,
see page 378 380
Or trim panel,
see page 381
Approvals:
UL
CSA
TV
Detailed drawings:
T
B
H
F
G
Width: 600 800 mm, height: 800 1200 mm
Height (H) mm 800 1000 1200 1200 1000 1000 1200 1200
Depth (T) mm 400 400 300 400 300 400 300 400
Model No. CM 1 5110.500 5111.500 5112.500 5113.500 5114.500 5115.500 5116.500 5117.500
Door 1 1 1 1 1 1 1 1
Base/plinths
Components front and rear
Height 100 mm 1 set 8601.600 8601.600 8601.600 8601.600 8601.800 8601.800 8601.800 8601.800 361
Height 200 mm 1 set 8602.600 8602.600 8602.600 8602.600 8602.800 8602.800 8602.800 8602.800 361
Trim panels, sides
Height 100 mm 1 set 8601.040 8601.040 8601.030 8601.040 8601.030 8601.040 8601.030 8601.040 362
Height 200 mm 1 set 8602.040 8602.040 8602.030 8602.040 8602.030 8602.040 8602.030 8602.040 362
Accessories
Rail for interior installation
for height 4 5001.051 5001.052 5001.053 5001.053 5001.052 5001.052 5001.053 5001.053 459
for width 4 5001.050 5001.050 5001.050 5001.050 5001.051 5001.051 5001.051 5001.051 459
Matching punched sections
with mounting flanges
in depth 4 8612.140 8612.140 8612.130 8612.140 8612.130 8612.140 8612.130 8612.140 459
in width 4 8612.060 8612.060 8612.060 8612.060 8612.080 8612.080 8612.080 8612.080 459
Base configuration rail 2 5001.370 5001.370 5001.371 5001.370 5001.371 5001.370 5001.371 5001.370 461
Mounting plate slide block 2 5001.070 5001.070 5001.070 5001.070 5001.070 5001.070 5001.070 5001.070 446
Support strips for door 20 4596.000 4596.000 4596.000 4596.000 4598.000 4598.000 4598.000 4598.000 426
TS punched section with mounting flange,
17 x 73 mm
4 8612.050 8612.050 8612.050 8612.050 459
Cable clamp rails 1 5001.080 5001.080 5001.080 5001.080 5001.081 5001.081 5001.081 5001.081 527
Sheet steel wiring plan pocket, depth 35 mm 1 4116.500 4116.500 4116.500 4116.500 4118.500 4118.500 4118.500 4118.500 429
Rain canopy/vented roof 1 5001.310 5001.310 5001.310 5001.330 5001.330 431
Compact system enclosures Rittal CM
Width: 1000 1200 mm, height: 1000 1400 mm
Height (H) mm 1000 1200 1200 1400 1400 1200
Depth (T) mm 300 300 400 300 400 400
Model No. CM 1 5118.500 5119.500 5120.500 5121.500 5122.500 5123.500
Doors 2 2 2 2 2 2
Base/plinths
Height 100 mm 1 set 8601.000 8601.000 8601.000 8601.000 8601.000 8601.200 361
Height 200 mm 1 set 8602.000 8602.000 8602.000 8602.000 8602.000 8602.200 361
Trim panels, sides
Height 100 mm 1 set 8601.030 8601.030 8601.040 8601.030 8601.040 8601.040 362
Height 200 mm 1 set 8602.030 8602.030 8602.040 8602.030 8602.040 8602.040 362
Accessories
for height 4 5001.052 5001.053 5001.053 5001.054 5001.054 5001.053 459
for width 4 5001.052 5001.052 5001.052 5001.052 5001.052 5001.053 459
Matching punched sections
in depth 4 8612.130 8612.130 8612.140 8612.130 8612.140 8612.140 459
in width 4 8612.000 8612.000 8612.000 8612.000 8612.000 8612.020 459
Base configuration rail 2 5001.371 5001.371 5001.370 5001.371 5001.370 5001.370 461
Mounting plate slide block 2 5001.070 5001.070 5001.070 5001.070 5001.070 5001.070 446
Support strips for door 20 4309.000 4309.000 4309.000 4309.000 4309.000 4596.000 426
17 x 73 mm
4 8612.040 8612.040 8612.040 8612.040 8612.040 8612.050 459
Cable clamp rails 1 5001.082 5001.082 5001.082 5001.082 5001.082 5001.083 527
Sheet steel wiring plan pocket, depth 35 mm 1 4115.500 4115.500 4115.500 4115.500 4115.500 4116.500 429
Rain canopy/vented roof 1 5001.350 5001.350 5001.360 431
Rittal China
RITTAL Electro-Mechanical Technology
(Shanghai) Co. Ltd.
No. 1658 Minyi Road Songjiang District
Shanghai, 201612
Phone: +86 (0) 21 5115 7799
Fax: +86 (0) 21 5115 7788
E-mail: [email protected] www.rittal.cn
System accessories Page 355 KS for potentially explosive areas Page 177
Material:
Enclosure and door:
Fibreglass-reinforced
unsaturated polyester
Mounting plate:
Sheet steel
Foamed-in PU seal
For KS with viewing window:
Glazed acrylic, 3.0 mm with
all-round rubber cable clamp
strip
Surface finish:
Enclosure and door:
Dyed plastic with no
aftertreatment
See table
Colour:
Similar to RAL 7035
Supply includes:
Enclosure with hinged door,
of all-round solid construc-
tion, 3 mm double-bit lock
For single-door enclosures:
R/h door hinge, may be
swapped to opposite side by
rotating the enclosure
For two-door enclosures:
Lockable door on right
Mounting plate
Twin seal on the top and
bottom edges of the door as
integral rain protection strip
Press-fitted C sections at the
sides for infinitely variable
mounting plate depth adjust-
ment
KS 1400.500 additionally with
removable centre bar in the
enclosure
Note:
Under the influence of long-term
UV radiation (sunlight) in con-
junction with wind and rain, the
surface finish may become
visually impaired. This does not
affect the protection of the
installed electrical components
in any way. If the enclosures
cannot be protected from UV
radiation, we recommend that
they should be painted with a
PUR paint.
Ambient temperature 30C to
+75C.
Approvals:
TV
Germanischer Lloyd
Russian Maritime Register
of Shipping
Bureau Veritas
VDE
Detailed drawings:
T
F
B
H
G
Height (H) mm 300 350 400 400 400 600 600 500
Depth (T) mm 150 150 200 200 200 200 200 300
Mounting plate thickness mm 2.0 2.0 2.0 2.5 2.5 2.5 2.5 2.5
Model No. KS 1 1423.500 1432.500 1434.500 1444.500 1448.500 1446.500 1449.500 1453.500
Door(s) 1 1 1 1 1 1 1 1
Viewing window
Cam lock 1 1 2 2 2 2 2 2
3-point lock system
Weight (kg) 3.4 4.3 5.9 7.9 8.0 11.5 11.2 13.5
Protection
category
IP 66 to IEC 60 529,
complies with NEMA 4X.

IP 56 to IEC 60 529,

Accessories
Mounting plate adjustment bracket 4 1481.000 1481.000 1481.000 1481.000 1481.000 1481.000 1481.000 1491.000 446
Threaded inserts M6 20 1482.000 1482.000 1482.000 1482.000 1482.000 1482.000 1482.000 1482.000 478
Pole clamp 1 set 2584.000 2584.000 2584.000 2584.000 2584.000 2584.000 2584.000 2584.000 441
Wall mounting bracket 4 1483.010 1483.010 1483.010 1483.010 1483.010 1483.010 1483.010 1483.010 440
Height (H) mm 500 600 600 800 800 1000 1000 1000
Depth (T) mm 300 200 200 300 300 300 300 300
Mounting plate thickness mm 2.5 2.5 2.5 3.0 3.0 3.0 3.0 3.0
Model No. KS 1 1454.500 1466.500 1467.500 1468.500 1469.500 1480.500 1479.500 1400.500
Door(s) 1 1 1 1 1 1 1 2
Viewing window
Cam lock 2 2 2
3-point lock system
Weight (kg) 13.4 15.9 15.6 26.5 26.0 41.7 39.9 51.6
Protection
category
IP 66 to IEC 60 529,

IP 56 to IEC 60 529,

Accessories
Mounting plate adjustment bracket 4 1491.000 1481.000 1481.000 1491.000 1491.000 1491.000 1491.000 1491.000 446
Threaded inserts M6 20 1482.000 1482.000 1482.000 1482.000 1482.000 1482.000 1482.000 1482.000 478
Pole clamp 1 set 2584.000 2584.000 2584.000 2584.000 2584.000 2584.000 2584.000 2584.000 441
Wall mounting bracket 4 1483.010 1483.010 1483.010 1483.010 1483.010 1483.010 1483.010 1483.010 440
Rittal Denmark
RITTAL A/S
Dybendalsvnget 4 DK-2630 Taastrup
Phone: +45 70 25 59 00 Fax: +45 70 25 59 01
E-mail: [email protected] www.rittal.dk
52
53
Wall-mounted distributors
VerticalBox ..................................................................................................54
FlatBox with 482.6 mm (19) mounting angles............................................55
FlatBox with 482.6 mm (19) mounting frame .............................................56
QuickBox with glazed door .........................................................................57
QuickBox with glazed door/sheet steel door ..............................................58
QuickBox with vertical 482.6 mm (19) level ...............................................59
Wall-mounted enclosures EL, 3-part, depth 573/673 mm, pre-configured ...60
Wall-mounted enclosures EL, 3-part, depth 473 mm, with punched rails.....61
Wall-mounted enclosures EL, 3-part, depth 373 mm, with mounting plate...62
Wall-mounted enclosures EL, 3-part, depth 473 mm, with mounting plate...63
Wall-mounted enclosures EL, 2-part, depth 369 mm, with swing frame .......64
Wall-mounted enclosures AE with 482.6 mm (19) mounting angles ............65
Wall-mounted enclosures AE with 482.6 mm (19) pull-out frame ................66
Small fibre-optic distributors .......................................................................67
VerticalBox
Compact 482.6 mm (19)
enclosure for small networks
May be used as wall-
mounted, under-desk or
desktop enclosure
482.6 mm (19) level, front
and rear
Free access from three sides
for interior installation
Freely selectable door hinging
Passive ventilation with vent
slots
Rear panel prepared to
accommodate a fan
Horizontal 10 U may be used
by installing 482.6 mm (19)
mounting angles
Material:
Sheet steel
Viewing window: Single-pane
safety glass, 3 mm
Surface finish:
Powder-coated
Colour:
RAL 7035
Supply includes:
Enclosure with glazed door
Side panels (1 x fixed,
1 x slot-in) with vent slots
Knockouts for cable entry
via roof or base
Slot-in rear panel with knock-
outs for cable entry and fan
accommodation
482.6 mm (19) mounting
level, 5 U, front and rear,
depth-variable, distance
between levels 434 489 mm
Security lock 12321 on the
door, side and rear panel
4 plastic feet, self-adhesive
Detailed drawing:
U Packs of 5 Page
Width mm 300
Height mm 540
Depth mm 600
Model No. DK 1 7501.000
Accessories
Mounting kit for VerticalBox, hinged mounting plate 350 x 484 mm 1 7501.100 567
482.6 mm (19) mounting angles, 12 U (10 U usable)
1)
2 7502.203 554
Brush strip for cut-out openings 2 x 1 m 7072.200 518
Wall mounting bracket, 10 mm 4 2508.010 439
Fan expansion kit, 230 V AC, 50/60 Hz, 108/125 m
3
/h, air throughput, unimpeded airflow 1 set 7980.100 222
Blanking panel, 482.6 mm (19), 1 U, RAL 7035 2 7151.035 571
Cable management panel, 482.6 mm (19), 1 U, RAL 7035,
with 5 cable shunting rings 40 x 50 mm
1 7257.200 539
482.6 mm (19) socket strip, 7-way, with rocker switch 1 7240.220 505
Cable entry panel, 482.6 mm (19), 1 U 1 7140.535 542
1)
For mounting at the side of the VerticalBox. With these mounting angles, instead of 5 U vertically at the side, up to 10 U may be used horizontally
if only a minimal installation depth is required. Infinitely depth-variable positioning.
FlatBox
For use as a wall-mounted and
floor-standing enclosure.
Small package big perform-
ance. Time-saving, flexible,
clever
For flexible use as a wall-
mounted or floor-standing
enclosure
Maximum width and depth
of 700 mm creates plenty of
space for use as a patch
distributor
Toolless quick assembly
System assembly on the open
482.6 mm (19) frame
Material:
Sheet steel
safety glass, 3 mm
Surface finish:
Powder-coated
Colour:
RAL 7035
Note:
Max. installation depth:
D 112 mm
Max. distance between two
482.6 mm (19) levels:
D 126 mm
Supply includes:
Flat-packed enclosure
1 wall section
2 basic supports
2 roof/base plates,
with cut-outs for cable entry,
with brush strips
2 mounting angles, 482.6 mm
(19) (for 6 U and 9 U)
1 mounting frame 482.6 mm
(19) (from 12 U)
4 levelling feet (from 12 U)
2 side panels, lockable
1 glazed door, lockable,
security lock 3524 E,
door hinge point selectable
Connection components for
toolless, fast assembly
Earthing kit for system-
compatible earthing of all
enclosure parts
Detailed drawing:
Photo shows a configuration
example with equipment not
included in the scope of supply.
With 482.6 mm (19) mounting angles
U
Packs
of
6 6 9 9 Page
Width mm 600 600 600 600
Height mm 358 358 492 492
Depth mm 400 600 400 600
Model No. DK 1 7507.000 7507.100 7507.010 7507.110
Accessories
482.6 mm (19) mounting angles as second attachment level 2 7507.706 7507.706 7507.709 7507.709 554
Levelling feet 4 7507.740 7507.740 7507.740 7507.740 374
Cover plates for fan panels 6 7507.760 7507.760 7507.760 7507.760 222
Earth rail 1 7113.000 7113.000 7113.000 7113.000 504
C rail for cable clamping 1 7016.140 7016.140 7016.140 7016.140 532
T-head rail for cable clamping 1 7016.150 7016.150 7016.150 7016.150 532
Fan, 230 V AC, 50/60 Hz, 117/135 m
3
/h, air throughput,
unimpeded airflow
1 7980.100 7980.100 7980.100 7980.100 222
Fan, 48 V DC, 184 m
3
/h, air throughput, unimpeded airflow 1 7980.148 7980.148 7980.148 7980.148 222
Enclosure internal thermostat 1 3110.000 3110.000 3110.000 3110.000 294
Cable management panel, 1 U, 5 cable shunting rings 40 x 50 mm 1 7257.200 7257.200 7257.200 7257.200 539
Component shelf 2 U, static installation, depth 250 mm 1 7119.250 7119.250 7119.250 7119.250 487
Component shelf 2 U, static installation, depth 400 mm 1 7119.400 7119.400 487
Component shelf 1 U, complete set, pull-out, depth 500 mm 1 set 7000.625 7000.625 486
Base/plinths 1 7507.750 7507.750 371
FlatBox
With 482.6 mm (19) mounting frame
U
Packs
of
12 12 15 15 18 21 Page
Width mm 600 600 600 700 700 700
Height mm 625 625 758 758 892 1025
Depth mm 400 600 400 700 700 700
Model No. DK 1 7507.020 7507.120 7507.030 7507.200 7507.210 7507.220
Accessories
482.6 mm (19) mounting angles as second attachment level 2 7507.712 7507.712 7507.715 7507.715 7507.718 7507.721 554
Cover plates for fan panels 6 7507.760 7507.760 7507.760 7507.760 7507.760 7507.760 222
Earth rail 1 7113.000 7113.000 7113.000 7113.000 7113.000 7113.000 504
C rail for cable clamping 1 7016.140 7016.140 7016.140 7016.140 7016.140 7016.140 532
T-head rail for cable clamping 1 7016.150 7016.150 7016.150 7016.150 7016.150 7016.150 532
Fan, 230 V AC, 50/60 Hz, 117/135 m
3
/h, air throughput,
unimpeded airflow
1 7980.100 7980.100 7980.100 7980.100 7980.100 7980.100 222
Fan, 48 V DC, 184 m
3
/h, air throughput, unimpeded airflow 1 7980.148 7980.148 7980.148 7980.148 7980.148 7980.148 222
Enclosure internal thermostat 1 3110.000 3110.000 3110.000 3110.000 3110.000 3110.000 294
Cable management panel, 1 U, 5 cable shunting rings 40 x 50 mm 1 7257.200 7257.200 7257.200 7257.200 7257.200 7257.200 539
Component shelf 2 U, static installation, depth 250 mm 1 7119.250 7119.250 7119.250 7119.250 7119.250 7119.250 487
Component shelf 2 U, static installation, depth 400 mm 1 7119.400 7119.400 7119.400 7119.400 487
Component shelf 1 U, complete set, pull-out, depth 500 mm 1 set 7000.625 7000.625 7000.625 7000.625 486
Base/plinths 1 7507.750 7507.755 7507.755 7507.755 371
QuickBox
Wall-mounted enclosure with
removable cover for perfect
handling during installation
and maintenance.
Material:
Wall mounting plate with
mounting brackets:
Sheet steel, 2.0 mm
Enclosure cover:
Sheet steel, 1.0 mm
Door: Sheet steel door or
glazed door with sheet steel
frame and single-pane safety
glass, 3 mm
Surface finish:
Enclosure: Powder-coated
Colour:
RAL 7035
Supply includes:
Wall section:
Pre-configured mounting
bracket
Brush strip for cable entry at
the bottom/top
Cable clamp rail
482.6 mm (19) mounting
angles, fully depth adjustable
Enclosure cover:
Base and cover tray with vent
slots
the top/bottom
2 side security locks
Sheet steel door or glazed
door with security lock 12321
Version with Ergoform-S lock
system, may optionally be
retrofitted with semi-cylinder
Detailed drawings:
H
2
T
2
B
2
H
1
T
1
B
1
With glazed door
U
Packs
of
6 6 6 9 9 12 12 12 12 Page
Enclosure
cover
Width (B1) mm 600 600 600 600 600 600 600 600 600
Height (H1) mm 362 362 362 495 495 628 628 628 628
Depth (T1) mm 300 400 600 400 600 400 500 600 600
Wall section
Width (B2) mm 595 595 595 595 595 595 595 595 595
Height (H2) mm 355 355 355 488 488 621 621 621 621
Max. installation
depth (T2) mm
247 347 547 347 547 347 447 547 547
Model No. DK 1 7502.013 7502.014 7502.016 7502.024 7502.026 7502.034 7502.035 7502.036 7502.436
1)

Accessories
Mounting angles, 482.6 mm (19) 2 7502.203 7502.203 7502.203 7502.203 554
Solid gland plate 2 7502.310 7502.310 7502.310 7502.310 7502.310 7502.310 7502.310 7502.310 7502.310 517
Wall mounting bracket, 10 mm 4 2508.010 2508.010 2508.010 2508.010 2508.010 2508.010 2508.010 2508.010 2508.010 439
Wall mounting bracket, 40 mm 4 2503.010 2503.010 2503.010 2503.010 2503.010 2503.010 2503.010 2503.010 2503.010 439
Combination rails for enclosure width 6 7502.304 7502.304 7502.304 7502.304 7502.304 7502.304 7502.304 7502.304 7502.304 528
Combination rails
for enclosure depth
300/400 mm
6
7502.302 7502.302 7502.302 7502.302 7502.302 7502.302 7502.302 7502.302 7502.302 528
500/600 mm 7502.304 7502.304 7502.304 7502.304 7502.304 7502.304 7502.304 7502.304 7502.304 528
Slide rails for the
enclosure depth
300 mm 10 4530.000 4530.000 4530.000 4530.000 4530.000 4530.000 4530.000 4530.000 4530.000 561
400 mm
2
4531.000 4531.000 4531.000 4531.000 4531.000 7492.300
2)
7492.300
2)
7492.300
2)
7492.300
2)
560/561
500/600 mm 4531.000 4531.000 4531.000 4531.000 4531.000 7492.400
2)
7492.400
2)
7492.400
2)
7492.400
2)
560/561
Earthing kit 1 7502.240 7502.240 7502.260 7502.240 7502.260 7502.240 7502.260 7502.260 7502.260 503
Quick-release fastener 2 7502.220 7502.220 7502.220 7502.220 7502.220 7502.220 7502.220 7502.220 7502.220 424
1)
With Ergoform-S lock system for semi-cylinder, for combining with quick-release fastener QB 7502.220.
2)
Additional mounting angles required at the rear.
QuickBox
With glazed door
With sheet steel door
U
Packs
of
15 15 15 15 18 18 21 21 Page
Enclosure cover
Width (B1) mm 600 600 600 600 600 600 600 600
Height (H1) mm 762 762 762 762 895 895 1028 1028
Depth (T1) mm 400 500 600 600 400 600 400 600
Wall section
Width (B2) mm 595 595 595 595 595 595 595 595
Height (H2) mm 755 755 755 755 888 888 1021 1021
Max. installation
depth (T2) mm
347 447 547 547 347 547 347 547
Model No. DK 1 7502.044 7502.045 7502.046 7502.446
1)
7502.054
3)
7502.056 7502.064
3)
7502.066
Accessories
Mounting angles, 482.6 mm (19) 2 7502.204 7502.204 7502.204 7502.204 7502.205 7502.205 7502.206 7502.206 554
Solid gland plate 2 7502.310 7502.310 7502.310 7502.310 7502.310 7502.310 7502.310 7502.310 517
Wall mounting bracket, 10 mm 4 2508.010 2508.010 2508.010 2508.010 2508.010 2508.010 2508.010 2508.010 439
Wall mounting bracket, 40 mm 4 2503.010 2503.010 2503.010 2503.010 2503.010 2503.010 2503.010 2503.010 439
Combination rails for enclosure width 6 7502.304 7502.304 7502.304 7502.304 7502.304 7502.304 7502.304 7502.304 528
Combination rails
for enclosure depth
300/400 mm
6
7502.302 7502.302 7502.302 7502.302 7502.302 7502.302 7502.302 7502.302 528
500/600 mm 7502.304 7502.304 7502.304 7502.304 7502.304 7502.304 7502.304 7502.304 528
Slide rails
for the enclosure depth
400 mm 2 7492.300
2)
7492.300
2)
7492.300
2)
7492.300
2)
7492.300
2)
7492.300
2)
7492.300
2)
7492.300
2)
560
500/600 mm 2 7492.400
2)
7492.400
2)
7492.400
2)
7492.400
2)
7492.400
2)
7492.400
2)
7492.400
2)
7492.400
2)
560
Earthing kit 1 7502.240 7502.260 7502.260 7502.260 7502.240 7502.260 7502.240 7502.260 503
Quick-release fastener 2 7502.220 7502.220 7502.220 7502.220 7502.220 7502.220 7502.220 7502.220 424
1)
With Ergoform-S lock system for semi-cylinder F, for combining with quick-release fastener QB 7502.220.
2)
3)
U
Packs
of
6 9 9 12 15 15 21 Page
Enclosure cover
Width (B1) mm 600 600 600 600 600 600 600
Height (H1) mm 362 495 495 628 762 762 1028
Depth (T1) mm 400 400 600 600 400 600 600
Wall section
Width (B2) mm 595 595 595 595 595 595 595
Height (H2) mm 355 488 488 621 755 755 1021
Max. installation
depth (T2) mm
347 347 547 547 347 547 547
Model No. DK 1 7502.114 7502.124 7502.126 7502.136 7502.144
3)
7502.146 7502.166
3)

Accessories
Solid gland plate 2 7502.310 7502.310 7502.310 7502.310 7502.310 7502.310 7502.310 517
Wall mounting bracket, 10 mm 4 2508.010 2508.010 2508.010 2508.010 2508.010 2508.010 2508.010 439
Combination rails for enclosure width 6 7502.304 7502.304 7502.304 7502.304 7502.304 7502.304 7502.304 528
Combination rails
for enclosure depth
300/400 mm
6
7502.302 7502.302 7502.302 7502.302 7502.302 7502.302 7502.302 528
500/600 mm 7502.304 7502.304 7502.304 7502.304 7502.304 7502.304 7502.304 528
Slide rails
for the enclosure depth
300 mm 10 4530.000 4530.000 4530.000 4530.000 4530.000 4530.000 4530.000 561
400 mm 10 4531.000 4531.000 4531.000 7492.300
2)
7492.300
2)
7492.300
2)
7492.300
2)
560/561
500/600 mm 2 4531.000 4531.000 4531.000 7492.400
2)
7492.400
2)
7492.400
2)
7492.400
2)
560/561
Earthing kit 1 7502.240 7502.240 7502.260 7502.260 7502.240 7502.260 7502.260 503
Quick-release fastener 2 7502.220 7502.220 7502.220 7502.220 7502.220 7502.220 7502.220 424
2)
3)
QuickBox
Wall-mounted enclosure
with optimum use of the
interior space
thanks to side installation of the
482.6 mm (19) components.
Status monitoring via side view-
ing window.
Material:
Wall mounting plate with
mounting brackets:
Sheet steel, 2.0 mm
Enclosure cover:
Sheet steel, 1.0 mm, with
single-pane safety glass at
the side, 3 mm
Surface finish:
Powder-coated
Colour:
RAL 7035
Supply includes:
Wall section:
With pre-configured 482.6 mm
(19) mounting brackets for
accommodating equipment at
the side
the bottom and top
Enclosure cover:
Side vent slots to support
passive climate control
The enclosure is secured via
two security locks positioned
at the sides.
Detailed drawings:
T
2
B
2
H
2
H
1
T
1 B
1
With vertical 482.6 mm (19) level
U Packs of 3 6 Page
Enclosure cover
Width (B1) mm 600 600
Height (H1) mm 631 631
Depth (T1) mm 210 360
Wall section
Width (B2) mm 595 595
Height (H2) mm 621 621
Depth (T2) mm 198 348
Model No. DK 1 7502.630
1)
7502.660
1)

Accessories
Gland plates, solid 2 7502.310 7502.310 517
Wall mounting bracket, 10 mm 4 2508.010 2508.010 439
Wall mounting bracket, 40 mm 4 2503.010 2503.010 439
Combination rails for vertical mounting on the QuickBox wall section 6 7502.304 7502.304 528
Combination rails for horizontal mounting on the QuickBox wall section 6 7502.304 7502.304 528
Mounting angles, 482.6 mm (19) for front mounting, 12 U 2 7502.203 7502.203 554
1)
Wall-mounted enclosures EL, 3-part
Depth 573/673 mm, pre-configured
U Packs of 9 9 15 15 21 21 Page
Width (B1) mm 600 600 600 600 600 600
Height (H1) mm 478 478 746 746 1012 1012
Depth (T1) mm 573 673 573 673 573 673
Clearance width (B2) mm 502 502 502 502 502 502
Clearance height (H2) mm 415 415 683 683 949 949
Depth of wall section (T2) mm 135 135 135 135 135 135
Depth of hinged part (T3) mm 416 516 416 516 416 516
Maximum installation depth (T4) mm 520 620 520 620 520 620
Load capacity of hinged part (kg, static) 45 45 75 75 75 75
Protection category IP 54 to IEC 60 529
when using solid gland plates SZ 2235.135

Model No. DK 1 7709.735 7709.535 7715.735 7715.535 7721.735 7721.535
Wall section:
Gland plate, solid, top 1
Gland plate with brush insert, bottom 1
Vertical punched rails 2
Horizontal C rail 1
Hinged part:
482.6 mm (19) mounting angles, fully depth adjustable 2
Side outlet filters left and right 2
Earth rail with star earthing 1 set
Wall mounting bracket, 10 mm 4
Accessories
Gland plate for metric cable glands 1 7705.235 7705.235 7705.235 7705.235 7705.235 7705.235 517
Fan expansion kit, 230 V 1 7980.100 7980.100 7980.100 7980.100 7980.100 7980.100 222
Spare filter mats 5 3322.700 3322.700 3322.700 3322.700 3322.700 3322.700 301
Wall mounting bracket, 40 mm 4 2503.010 2503.010 2503.010 439
Lock inserts, type F see page 421
Component shelf 2 U, static installation or fully extendible,
300 mm deep
1 7148.035 7148.035 7148.035 7148.035 7148.035 7148.035 485
Component shelf 2 U, static installation, 250 mm deep 1 7119.250 7119.250 7119.250 7119.250 7119.250 7119.250 487
Cable management panel, 1 U, 5 cable shunting rings 40 x 50 mm 1 7257.200 7257.200 7257.200 7257.200 7257.200 7257.200 539
Included with the supply.
System accessories Page 355 Socket strips Page 505 Wall mounting bracket Page 439 Cable clamps Page 529
with optimum accessibility
thanks to hinged part.
Material:
Wall and hinged part:
Sheet steel, 1.5 mm
safety glass, 3 mm
Surface finish:
Powder-coated
Colour:
RAL 7035
Glazed door: RAL 7035/7015
(slate grey)
Supply includes:
Wall section
Hinged part with 25 mm pitch
pattern of holes in the front
and rear frame
Designer glazed door
Mini comfort handle
for 3 15 U
Comfort handle and 2-point
lock for 18 21 U
Including security lock 3524 E
scope, see table
Detailed drawings:
H
1
H
2
T
1
B
1
T
4
T
3
T
2
B
2
System accessories Page 355 Socket strips Page 505 Wall mounting bracket Page 439 Earthing Page 501 Cable clamps Page 529
Material:
Sheet steel, 1.5 mm
safety glass, 3 mm
Surface finish:
Powder-coated
Colour:
RAL 7035
(slate grey)
IP 55 to IEC 60 529
Supply includes:
Wall section
and rear frame
Mini comfort handle
for 3 15 U
lock for 18 21 U
scope, see table
Detailed drawings:
H
1
H
2
T
1
B
1
T
4
T
3
T
2
B
2
Depth 473 mm, with punched rails
U Packs of 6 9 12 15 18 21 Page
Width (B1) mm 600 600 600 600 600 600
Height (H1) mm 345 478 612 746 878 1012
Depth (T1) mm 473 473 473 473 473 473
Depth of wall section (T2) mm 135 135 135 135 135 135
Depth of hinged part (T3) mm 316 316 316 316 316 316
Maximum installation depth (T4) mm 420 420 420 420 420 420
Load capacity of hinged part (kg, static) 30 45 60 75 75 75
Model No. DK 1 7706.135 7709.135 7712.135 7715.135 7718.135 7721.135
Wall section:
Gland plate, solid, top and bottom 2
Vertical punched rails 2
Horizontal C rail for cable clamping 1
Hinged part:
482.6 mm (19) mounting angles,
fully depth adjustable
2
Wall mounting bracket, 10 mm 4
Accessories
Gland plate with brush insert 1 7705.035 7705.035 7705.035 7705.035 7705.035 7705.035 518
Gland plate for metric cable glands 1 7705.235 7705.235 7705.235 7705.235 7705.235 7705.235 517
Wall mounting bracket, 40 mm 4 2503.010 2503.010 2503.010 2503.010 2503.010 2503.010 439
Earth rail, horizontal 1 7113.000 7113.000 7113.000 7113.000 7113.000 7113.000 504
Component shelf 2 U, static installation and fully extendible 1 7148.035 7148.035 7148.035 7148.035 7148.035 7148.035 485
Cable management panel, 1 U,
5 cable shunting rings 40 x 50 mm
1 7257.200 7257.200 7257.200 7257.200 7257.200 7257.200 539
Depth 373 mm, with mounting plate
U Packs of 3 6 9 12 15 18 21 Page
Width (B1) mm 600 600 600 600 600 600 600
Height (H1) mm 212 345 478 612 746 878 1012
Depth (T1) mm 373 373 373 373 373 373 373
Clearance width (B2) mm 502 502 502 502 502 502 502
Clearance height (H2) mm 149 282 415 549 683 815 949
Depth of wall section (T2) mm 135 135 135 135 135 135 135
Depth of hinged part (T3) mm 216 216 216 216 216 216 216
Maximum installation depth (T4) mm 320 320 320 320 320 320 320
Width of mounting plate (B3) mm 485 485 485 485 485 485 485
Height of mounting plate (H3) mm 165 299 432 565 699 832 965
Load capacity of hinged part (kg, static) 15 30 45 60 75 75 75
Model No. EL 1 2243.605 2246.605 2249.605 2252.605 2255.605 2258.605 2261.605
Wall section:
Mounting plate supplied loose 1
Hinged part: 482.6 mm (19) mounting angles 2
Accessories
Gland plate with brush insert 1 7705.035 7705.035 7705.035 7705.035 7705.035 7705.035 7705.035 518
Gland plate for metric cable glands 1 7705.235 7705.235 7705.235 7705.235 7705.235 7705.235 7705.235 517
C rails 4 2238.000 2238.000 2238.000 2238.000 2238.000 2238.000 2238.000 467
Blanking plates, 482.6 mm (19) 3 see page 564
System accessories Page 355 Socket strip Page 505 Wall mounting bracket Page 439 Cable clamps Page 529 Earthing Page 501
Material:
Sheet steel, 1.5 mm
safety glass, 3 mm
Surface finish:
Powder-coated
Colour:
RAL 7035
(slate grey)
IP 55 to IEC 60 529
Supply includes:
Wall section
and rear frame
Mini comfort handle
for 3 15 U
lock for 18 21 U
scope, see table
Detailed drawings:
H
1
H
2
T
1
B
1
T
4
T
3
T
2
B
2
H
3
B
3
Depth 473 mm, with mounting plate
U Packs of 3 6 9 12 15 18 21 Page
Width (B1) mm 600 600 600 600 600 600 600
Height (H1) mm 212 345 478 612 746 878 1012
Depth (T1) mm 473 473 473 473 473 473 473
Clearance width (B2) mm 502 502 502 502 502 502 502
Clearance height (H2) mm 149 282 415 549 683 815 949
Depth of wall section (T2) mm 135 135 135 135 135 135 135
Depth of hinged part (T3) mm 316 316 316 316 316 316 316
Maximum installation depth (T4) mm 420 420 420 420 420 420 420
Width of mounting plate (B3) mm 485 485 485 485 485 485 485
Height of mounting plate (H3) mm 165 299 432 565 699 832 965
Load capacity of hinged part (kg, static) 15 30 45 60 75 75 75
Model No. EL 1 2253.605 2256.605 2259.605 2262.605 2265.605 2268.605 2271.605
Wall section:
Mounting plate supplied loose 1
Hinged part: 482.6 mm (19) mounting angles 2
Accessories
Gland plate with brush insert 1 7705.035 7705.035 7705.035 7705.035 7705.035 7705.035 7705.035 518
Gland plate for metric cable glands 1 7705.235 7705.235 7705.235 7705.235 7705.235 7705.235 7705.235 517
C rails 4 2239.000 2239.000 2239.000 2239.000 2239.000 2239.000 2239.000 467
Rittal Great Britain
RITTAL Limited
Braithwell Way Hellaby Industrial Estate
Hellaby Rotherham S Yorks S66 8QY
Phone: +44 (0) 1709 704000
Fax: +44 (0) 1709 701217
E-mail: [email protected]
www.rittal.co.uk
System accessories Page 355 Cage nuts Page 567 Patch panel for copper technology Page 569 Socket strips Page 505
thanks to swing frame.
Material:
Enclosure: Sheet steel,
1.5 mm
Swing frame: Sheet steel
Front door: Extruded alumin-
ium section, acrylic glazing,
3 mm
Surface finish:
Enclosure and swing frame:
Primed and powder-coated
Front door: Anodised
Colour:
Enclosure and swing frame:
RAL 7035
Front door: Silver
IP 55 to IEC 60 529
Supply includes:
Enclosure
Front door
Swing frame,
482.6 mm (19), fitted
Assembly parts
Approvals:
TV
of Shipping
VDE
UL/cUL
Bureau Veritas
Germanischer Lloyd
Detailed drawings:
H
1
B
1
T
1
T
2
T
3
B
2
H
2
Depth 369 mm, with swing frame
U Packs of 6 11 14 Page
Width (B1) mm 600 600 600
Height (H1) mm 380 600 760
Depth (T1) mm 369 369 369
Clearance width (B2) mm 537 537 537
Clearance height (H2) mm 317 537 697
Distance from glazed door to swing frame (T2) mm 67 97 67 97 67 97
Maximum installation depth (T3) mm 270 270 270
Model No. EL 1 1919.500 1920.500 1926.500
Accessories
Gland plates for metric cable glands 5 2563.010 2563.010 2563.010 514
Cable management panel, 482.6 mm (19), 1 U,
5 cable shunting rings 40 x 50 mm
1 7257.200 7257.200 7257.200 539
Cable entry panel, 482.6 mm (19), 1 U 1 7140.535 7140.535 7140.535 542
Standard swing frame with double-bit lock insert may be exchanged for 27 mm lock inserts, type A, see page 421.
Wall-mounted enclosures AE
System accessories Page 355 Socket strips Page 505 Captive nuts Page 567 Viewing panels Page 407
Wall-mounted enclosures
for small networks with a high
protection category.
Material:
Surface finish:
Mounting angles: Zinc-plated
Colour:
RAL 7035
See table.
Supply includes:
Interchangeable door hinge
Cam lock and double-bit
insert
Gland plate with brush strip
for cable entry in the enclo-
sure base
scope, see table
Approvals:
(except AE with pull-out frame)
UL
CSA
Bureau Veritas
TV
VDE
Germanischer Lloyd
Detailed drawing:
With 482.6 mm (19) mounting angles
Width mm 600 600 600
Height mm 380 600 760
Depth mm 350 350 350
Max. installation depth (T2) mm 310 310 310
Protection category with gland plate for cable gland IP 55 to IEC 60 529
Model No. DK 1 7641.000 7643.000 7645.000
Mounting angles, 482.6 mm (19), fully depth adjustable 2
C rail, for cable clamping on the rear panel 1
Metal bracket for optional accommodation of an earth rail
or 482.6 mm (19) socket strip
1
Cam locks 4 1 x 2 x 2 x
Accessories
Gland plates in various versions
Size 5 5 5
514 518
Qty. 1 1 1
Wall mounting bracket for external mounting 4 2508.100 2508.100 2508.100 439
Viewing window, 34 mm profile depth 1 2730.000 2731.000 2732.000 408
Viewing window, 60 mm profile depth 1 2760.000 2761.000 2762.000 408
Component shelf 2 U, static installation, 250 mm deep 1 7119.250 7119.250 7119.250 487
Earth rail 1 7113.000 7113.000 7113.000 504
Wall-mounted enclosures AE
System accessories Page 355 Socket strips Page 505 Captive nuts Page 567 Viewing panels Page 407
Material:
safety glass, 3 mm
Surface finish:
Pull-out frame: Stainless steel
Colour:
RAL 7035
See table.
Supply includes:
Cam lock and double-bit
insert
Gland plate with brush strip
for cable entry in the enclo-
sure base
scope, see table
Detailed drawing:
3
5
0
2
1
0
6
0
0
6
0
0
5
2
0
4
5
0
5
2
5
With 482.6 mm (19) pull-out frame
Width mm Packs of 600 Page
Height mm 600
Depth mm 350
L/h door hinge
Cam locks 2
Side installation, vertical 4 U
Front installation, vertical and horizontal 10 U
Protection category with gland plate for cable gland IP 54 to IEC 60 529
Model No. DK 1 7644.000
Pull-out frame attached to telescopic slides 1
Outlet filter in enclosure base and on left-hand side 2
Viewing window on right-hand side 1
Cable clamp rail on rear wall 1
Additional cable clamp rail for mounting on the pull-out frame
Accessories
Choice of gland plates
Size 5
514 518
Qty. 1
Wall mounting bracket for external mounting 4 2508.100 439
Shelf 1 7644.400
1)
487
Component shelf, 1 U, 140 mm deep 1 7119.140 486
Earth rail, horizontal 1 7113.000 504
Fan expansion kit 230 V AC (only for use at the bottom) 1 set 7980.100 222
Fan expansion kit 48 V DC (only for use at the bottom) 1 set 7980.148 222
Spare filter mats 5 3322.700 301
1)
Small fibre-optic distributors
Layout of the small fibre-optic
distributor:
Mounting plate with variable
accommodation for up to two
splicing cassettes (cassette
width variable from 92 to
120 mm) and integral anti-
twist guard
Dividing plate with comb strip
for cable clamping, to cover
the splicing cassette, and
to accommodate 2 patch
panels and patch panels for
F-SMA, E-2000 ST couplings,
E-2000 duplex, SC couplings
and SC duplex couplings
Cable entry via cable glands
in knockouts (12 x PG 7 and
1 x PG 16). Assembled con-
nectors fit through the knock-
outs (diameter of cut-outs:
12 x 12.5 mm and 2 x
22.5 mm). Additional sealing
inserts are required to reduce
the clamping range of the
cable glands
Material:
Enclosure and cover:
Fibreglass-reinforced poly-
carbonate
Cover screws: Polyamide
Insulating bungs: Polyamide
Foamed-in PU seal
Colour:
RAL 7035
IP 66 to IEC 60 529
Supply includes:
Enclosure with knockouts
for cable glands
Hinged cover with seal
2 cover screws, prepared
for a lead seal
Insulating bungs for wall
mounting
Mounting plate
Dividing plate
12 cable glands PG 7
1 cable gland PG 16
Detailed drawing:
H
2
4
4
1
6
9
.
5
1
7
0
1
4
5
B
T
Width (B) mm Packs of 180 Page
Height (H) mm 254
Depth (T) mm 90
Number of fibres (when using patch panels) 1 24
Model No. DK 1 7451.000
Accessories
Locations per
patch panel
Locations per
enclosure
Patch panel for ST couplings 12 24 2 7462.000
Patch panel for SC, E-2000, E-2000 duplex couplings 12/6 24/12 2 7463.100
Patch panel for SC duplex couplings 6 12 2 7463.200
Wall mounting brackets 40 9583.000 31
68
69
Enclosure systems
Baying systems TS 8
Height: 1200 mm/1400 mm, depth: 500 mm...............................................70
Height: 1600 mm, depth: 500 mm...............................................................71
IP 66/NEMA 4X and IP 66/NEMA 4 .............................................................76
For areas at risk from earthquakes..............................................................77
Baying systems TS 8
System accessories Page 355 TS 8 corner enclosures Page 401 TS 8 stainless steel Page 172
Material:
Enclosure frame, roof, rear
panel and gland plates:
Sheet steel, 1.5 mm
Door: Sheet steel, 2.0 mm
3.0 mm
Surface finish:
Enclosure frame:
Dipcoat-primed
Door, roof and rear panel:
textured paint
Mounting plate and gland
plates: Zinc-plated
Colour:
RAL 7035
IP 55 to IEC 60 529,
Supply includes:
Enclosure frame with door(s),
3 mm double-bit lock insert
Mounting plate
Gland plates
Rear panel
Roof plate
4 eyebolts
Approvals:
UL
CSA
TV
of Shipping
TV Mark
Bureau Veritas
VDE
Germanischer Lloyd
Detailed drawings:
T
F
G
H
B
Height: 1200 mm/1400 mm, depth: 500 mm
Height (H) mm 1400 1400 1400
Depth (T) mm 500 500 500
Model No. TS 1 8645.500 8845.500 8245.500
Door(s) 1 1 2
Weight (kg) 86.0 107.5 163.5
Walls
Side panels 2 8145.235 8145.235 8145.235 385
Base/plinths
Height 100 mm 1 set 8601.600 8601.800 8601.200 361
Height 200 mm 1 set 8602.600 8602.800 8602.200 361
Trim panels, sides
Height 100 mm 1 set 8601.050 8601.050 8601.050 362
Height 200 mm 1 set 8602.050 8602.050 8602.050 362
Flex-Block see page 358
Levelling component for base/plinth see page 364
Accessories
Cable clamp rails for cable clamps 2 4191.000 4192.000 4196.000 527
Cable clamp rails (C section) for cable clamps 6 4944.000 4945.000 4947.000 465
Section for cable entry, rear 1 set 8802.065 8802.085 8802.125
1)
513
Support strips for door 20 4596.000 4598.000 4596.000 426
Wiring plan pocket, sheet steel 1 4116.X00 4118.X00 4116.X00 429
180 hinges 4 8800.190 8800.190 8800.190 425
System lights see page 491
Door stay for escape routes 1 4583.500 4583.500 4583.500 429
1)
Packs of 2 sets
Baying systems TS 8
Height: 1600 mm, depth: 500 mm
Height (H) mm 1600 1600 1600
Depth (T) mm 500 500 500
Model No. TS 1 8665.500 8865.500 8265.500
Door(s) 1 1 2
Weight (kg) 100.0 103.0 159.3
Walls
Side panels 2 8165.235 8165.235 8165.235 385
Base/plinths
Height 100 mm 1 set 8601.600 8601.800 8601.200 361
Height 200 mm 1 set 8602.600 8602.800 8602.200 361
Trim panels, sides
Height 100 mm 1 set 8601.050 8601.050 8601.050 362
Height 200 mm 1 set 8602.050 8602.050 8602.050 362
Accessories
1)
513
180 hinges 4 8800.190 8800.190 8800.190 425
1)
Packs of 2 sets
Height (H) mm 1800 1800 1800 1800 1800
Depth (T) mm 400 400 400 400 400
Mounting plate width (F) mm 499 699 899 899 1099
Mounting plate height (G) mm 1696 1696 1696 1696 1696
Model No. TS 1 8684.500 8884.500 8084.500 8080.500 8284.500
Door(s) 1 1 1 2 2
Weight (kg) 91.3 113.5 136.4 140.0 170.6
Walls
Side panels 2 8184.235 8184.235 8184.235 8184.235 8184.235 385
Divider panel 1 8609.840 8609.840 8609.840 8609.840 8609.840 389
Doors
Glazed door 1 8610.680 8610.880 402
Base/plinths
Height 100 mm 1 set 8601.600 8601.800 8601.000 8601.000 8601.200 361
Height 200 mm 1 set 8602.600 8602.800 8602.000 8602.000 8602.200 361
Trim panels, sides
Height 100 mm 1 set 8601.040 8601.040 8601.040 8601.040 8601.040 362
Height 200 mm 1 set 8602.040 8602.040 8602.040 8602.040 8602.040 362
Accessories
Cable clamp rails for cable clamps 2 4191.000 4192.000 4336.000 4336.000 4196.000 527
Cable clamp rails (C section) for cable clamps 6 4944.000 4945.000 4946.000 4946.000 4947.000 465
1)
8802.105
1)
8802.125
1)
513
Support strips for door 20 4596.000 4598.000 4599.000 4309.000 4596.000 426
Wiring plan pocket, sheet steel 1 4116.X00 4118.X00 4124.000 4115.X00 4116.X00 429
180 hinges 4 8800.190 8800.190 8800.190 8800.190 8800.190 425
Door stay for escape routes 1 4583.500 4583.500 4583.500 4583.500 4583.500 429
1)
Packs of 2 sets
Baying systems TS 8
Width (B) mm Packs of 600 800 800 1200 Page
Height (H) mm 1800 1800 1800 1800
Depth (T) mm 500 500 500 500
Mounting plate width (F) mm 499 699 699 1099
Mounting plate height (G) mm 1696 1696 1696 1696
Model No. TS 1 8685.500 8885.500 8880.500 8285.500
Door(s) 1 1 2 2
Weight (kg) 93.8 115.8 122.5 173.3
Walls
Side panels 2 8185.235 8185.235 8185.235 8185.235 385
Divider panel 1 8609.850 8609.850 8609.850 8609.850 389
Divider panel for module plates 1 8609.100 8609.100 8609.100 8609.100 390
Doors
Glazed door 1 8610.680 8610.880 402
Base/plinths
Height 100 mm 1 set 8601.600 8601.800 8601.800 8601.200 361
Height 200 mm 1 set 8602.600 8602.800 8602.800 8602.200 361
Trim panels, sides
Height 100 mm 1 set 8601.050 8601.050 8601.050 8601.050 362
Height 200 mm 1 set 8602.050 8602.050 8602.050 8602.050 362
Accessories
Mounting plate 1 451
Cable clamp rails for cable clamps 2 4191.000 4192.000 4192.000 4196.000 527
Cable clamp rails (C section) for cable clamps 6 4944.000 4945.000 4945.000 4947.000 465
Section for cable entry, rear 1 set 8802.065 8802.085 8802.085 8802.125
1)
513
Support strips for door 20 4596.000 4598.000 4594.000 4596.000 426
180 hinges 4 8800.190 8800.190 8800.190 8800.190 425
Door stay for escape routes 1 4583.500 4583.500 4583.500 4583.500 429
1)
Packs of 2 sets
Height (H) mm 1800 1800 1800 1800
Depth (T) mm 600 600 600 600
Model No. TS 1 8686.500 8886.500 8881.500 8286.500
Door(s) 1 1 2 2
Weight (kg) 96.8 120.3 125.8 179.9
Support strips fitted in the enclosure depth
Walls
Side panels 2 8186.235 8186.235 8186.235 8186.235 385
Divider panel 1 8609.860 8609.860 8609.860 8609.860 389
Doors
Glazed door 1 8610.680 8610.880 402
Base/plinths
Height 100 mm 1 set 8601.600 8601.800 8601.800 8601.200 361
Height 200 mm 1 set 8602.600 8602.800 8602.800 8602.200 361
Trim panels, sides
Height 100 mm 1 set 8601.060 8601.060 8601.060 8601.060 362
Height 200 mm 1 set 8602.060 8602.060 8602.060 8602.060 362
Accessories
Section for cable entry, rear 1 set 8802.065 8802.085 8802.085 8802.125
1)
513
180 hinges 4 8800.190 8800.190 8800.190 8800.190 425
1)
Packs of 2 sets
Baying systems TS 8
Height (H) mm 2000 2000 2000 2000
Depth (T) mm 400 400 400 400
Model No. TS 1 8604.500 8804.500 8004.500 8204.500
Door(s) 1 1 2 2
Weight (kg) 99.0 124.0 152.8 184.5
Walls
Side panels 2 8104.235 8104.235 8104.235 8104.235 385
Divider panel 1 8609.040 8609.040 8609.040 8609.040 389
Doors
Glazed door 1 8610.600 8610.800 402
Base/plinths
Height 100 mm 1 set 8601.600 8601.800 8601.000 8601.200 361
Height 200 mm 1 set 8602.600 8602.800 8602.000 8602.200 361
Trim panels, sides
Height 100 mm 1 set 8601.040 8601.040 8601.040 8601.040 362
Height 200 mm 1 set 8602.040 8602.040 8602.040 8602.040 362
Accessories
1)
8802.125
1)
513
Wiring plan pocket, sheet steel 1 4116.X00 4118.X00 4115.X00 4116.X00 429
180 hinges 4 8800.190 8800.190 8800.190 8800.190 425
1)
Packs of 2 sets
Height (H) mm 2000 2000 2000 2000
Depth (T) mm 500 500 500 500
Model No. TS 1 8605.500 8805.500 8005.500 8205.500
Door(s) 1 1 2 2
Weight (kg) 101.3 126.3 157.1 190.6
Walls
Side panels 2 8105.235 8105.235 8105.235 8105.235 385
Divider panel 1 8609.050 8609.050 8609.050 8609.050 389
Doors
Glazed door 1 8610.600 8610.800 402
Base/plinths
Height 100 mm 1 set 8601.600 8601.800 8601.000 8601.200 361
Height 200 mm 1 set 8602.600 8602.800 8602.000 8602.200 361
Trim panels, sides
Height 100 mm 1 set 8601.050 8601.050 8601.050 8601.050 362
Height 200 mm 1 set 8602.050 8602.050 8602.050 8602.050 362
Accessories
1)
8802.125
1)
513
Wiring plan pocket, sheet steel 1 4116.X00 4118.X00 4115.X00 4116.X00 429
180 hinges 4 8800.190 8800.190 8800.190 8800.190 425
1)
Packs of 2 sets
Baying systems TS 8
Height (H) mm 2000 2000 2000 2000
Depth (T) mm 600 600 600 600
Model No. TS 1 8606.500 8806.500 8006.500 8206.500
Door(s) 1 1 2 2
Weight (kg) 104.0 130.5 161.2 194.6
Walls
Side panels 2 8106.235 8106.235 8106.235 8106.235 385
Divider panel 1 8609.060 8609.060 8609.060 8609.060 389
Doors
Glazed door 1 8610.600 8610.800 402
Base/plinths
Height 100 mm 1 set 8601.600 8601.800 8601.000 8601.200 361
Height 200 mm 1 set 8602.600 8602.800 8602.000 8602.200 361
Trim panels, sides
Height 100 mm 1 set 8601.060 8601.060 8601.060 8601.060 362
Height 200 mm 1 set 8602.060 8602.060 8602.060 8602.060 362
Accessories
1)
8802.125
1)
513
180 hinges 4 8800.190 8800.190 8800.190 8800.190 425
1)
Packs of 2 sets
Height (H) mm 2000 2000 2000
Depth (T) mm 800 800 800
Model No. TS 1 8608.500 8808.500 8208.500
Door(s) 1 1 2
Weight (kg) 111.3 137.0 203.0
Walls
Side panels 2 8108.235 8108.235 8108.235 385
Divider panel 1 8609.080 8609.080 8609.080 389
Doors
Glazed door 1 8610.600 8610.800 402
Base/plinths
Height 100 mm 1 set 8601.600 8601.800 8601.200 361
Height 200 mm 1 set 8602.600 8602.800 8602.200 361
Trim panels, sides
Height 100 mm 1 set 8601.080 8601.080 8601.080 362
Height 200 mm 1 set 8602.080 8602.080 8602.080 362
Accessories
1)
513
180 hinges 4 8800.190 8800.190 8800.190 425
1)
Packs of 2 sets
Baying systems TS 8
Height (H) mm 2200 2200 2200
Depth (T) mm 600 600 600
Model No. TS 1 8626.500 8826.500 8226.500
Door(s) 1 1 2
Weight (kg) 113.1 139.3 208.0
Walls
Side panels 2 8126.235 8126.235 8126.235 385
Divider panel 1 8609.260 8609.260 8609.260 389
Doors
Glazed door 1 8610.620 8610.820 402
Base/plinths
Height 100 mm 1 set 8601.600 8601.800 8601.200 361
Height 200 mm 1 set 8602.600 8602.800 8602.200 361
Trim panels, sides
Height 100 mm 1 set 8601.060 8601.060 8601.060 362
Height 200 mm 1 set 8602.060 8602.060 8602.060 362
Accessories
1)
513
Wiring plan pocket, sheet steel 1 4116.X00 4118.X00 4116.X00 429
180 hinges 4 8800.190 8800.190 8800.190 425
1)
Packs of 2 sets
Rittal France
RITTAL SAS
ZA des Grands Godets 880 rue Marcel Paul
94507 Champigny sur Marne Cedex
Phone: +33 (0) 1 49 83 60 00
Fax: +33 (0) 1 49 83 82 06
E-mail: [email protected] www.rittal.fr
Baying systems TS 8
System accessories Page 355 Cable entry Page 511
Supply includes:
Enclosure frame with door,
3 mm double-bit lock insert
Roof plate
Gland plate
Rear panel
Mounting plate
4 eyebolts
See table.
NEMA 4X:
Material:
Enclosure frame, roof, base,
rear panel: Stainless steel
1.4301 (AISI 304), 1.5 mm
Door: Stainless steel 1.4301
(AISI 304), 2.0 mm
3.0 mm
Surface finish:
Enclosure frame: Uncoated
Door, roof, base, rear panel:
Exterior brushed,
grain size 400
NEMA 4:
Material:
Enclosure frame, roof, base,
rear panel: Sheet steel,
spray-finished, 1.5 mm
Door: Sheet steel,
spray-finished, 2.0 mm
3.0 mm
Surface finish:
Enclosure frame, door, roof,
base, rear panel:
Dipcoat-primed and powder-
textured paint
Colour:
RAL 7035
T
F
G
H
B
IP 66/NEMA 4X and IP 66/NEMA 4
Packs of Stainless steel Sheet steel Page
Width (B) mm 800 800
Height (H) mm 2000 2000
Depth (T) mm 600 600
Mounting plate width (F) mm 699 699
Mounting plate height (G) mm 1896 1896
Model No. TS 1 8450.680 8806.580
Door(s) 1 1
Protection category
IP 66 to IEC 60 529,
IP 66 to IEC 60 529,
Also required
Side panels IP 66/NEMA 4X, NEMA 4 2 8700.680 8106.580
Baying frame IP 66/NEMA 4X, NEMA 4 1 8700.010 8700.010
Quick-fit baying clamp, one-piece 6 8800.500 8800.500 395
Baying clamp, horizontal 4 8800.400 8800.400 395
Angular baying brackets 4 8800.430 8800.430 397
Base/plinths
Height 100 mm 1 set 8701.800 8601.800 367/361
Height 200 mm 1 set 8702.800 8602.800 367/361
Trim panels, sides
Height 100 mm 1 set 8701.060 8601.060 367/362
Height 200 mm 1 set 8702.060 8602.060 367/362
Base/plinth trim, modular 4 2913.000 367
Accessories
Cable clamp rails 2 4192.000 4192.000 527
Wiring plan pocket, sheet steel 1 4118.000 4118.000 429
System light see page 491
For areas at risk from earthquakes
Baying systems TS 8
1
4
2
3
TS 8 for earthquake zone 1, 2 and 3 to Bellcore
TS 8806.500:
W x H x D 800 x 2000 x 600 mm
With base/plinth (base/plinth components front
and rear, see page 361 and base/plinth trim, side,
see page 362), 100 mm high with a weight load of
152 kg spread evenly over the mounting plate.
Note:
These versions have been tested and meet the
requirements to Telcordia GR 63-CORE. They
should be seen as a comparative variable to the
customers own plant, since the certification of
empty enclosures is not possible.
TS 8 for earthquake zone 4 to Bellcore
TS 8806.500:
W x H x D 800 x 2000 x 600 mm
Fitted with:
Earthquake kit and
Earthquake base/plinth, see page 77,
with weight load of 450 kg distributed evenly over
the mounting plate.
(Photo shows TS 8 for earthquake zone 4 to
Bellcore)
3
2 4
Earthquake kit
Material:
Sheet steel
Surface finish:
Zinc-plated
Supply includes:
2 side reinforcements, bottom
2 bracing struts each, sides
8 gusset plates
Mounting plate attachment and reinforcement
including assembly parts
1
2
3
4
For enclosures
W x H x D
mm
Packs of Model No. TS
800 x 2000 x 600 1 8613.860
600 x 2000 x 600 1 8613.660
1)

600 x 2000 x 400 1 8613.640
1)

1)
Earthquake base/plinth
Height 100 mm
Material:
Corner pieces: Sheet steel 5 mm
Trim panels: Sheet steel 2 mm
Surface finish:
Powder-coated
Colour:
RAL 7022
Supply includes:
1 set =
4 corner pieces
2 depth stays
1 trim panel each front and rear
fully assembled.
For enclosures
W x D mm
800 x 600 1 8601.860
600 x 600 1 8601.660
1)

600 x 400 1 8601.640
1)

1)
78
79
Network distribution enclosures
Network enclosures TS 8
Pre-configured, doors unvented .................................................................80
Pre-configured, doors unvented/vented .....................................................81
Pre-configured, doors/rear wall unvented...................................................82
Pre-configured, doors unvented, divided ...................................................82
Network enclosures TE 7000
Pre-configured.............................................................................................85
600 mm width..............................................................................................86
800 mm width..............................................................................................87
Distributor racks
TE 7000 open ..............................................................................................88
Data Rack....................................................................................................89
System accessories Page 355 Power System Module Page 201 Monitoring Page 577 Climate control Page 207
Material:
Glazed door: Single-pane
safety glass, 3 mm
Surface finish:
Enclosure frame:
Dipcoat-primed
Doors and roof:
Dipcoat-primed,
powder-coated
Gland plates, punched
sections with mounting flanges
and mounting angles:
Zinc-plated
Colour:
RAL 7035
Supply includes:
Product-specific supply scope,
see table.
Detailed drawing:
T
B
H
1
H
2

Pre-configured, doors unvented
U Packs of 24 24 38 42
Width (B) mm 600 800 800 800
Height (H1 + H2) mm 1200 + 100 1200 + 100 1800 + 100 2000 + 100
Depth (T) mm 600 800 800 800
Distance between levels, pre-configured mm 498 498 498
Glazed aluminium door at the front, 180, with comfort handle for semi-cylinder
and security lock 3524 E
1
Sheet steel door at the rear, 130, with handle and security lock 3524 E 1
482.6 mm (19) mounting level at the front and rear,
cranked mounting angles screw-fastened onto installation brackets
approx. 150 mm behind the front edge of the frame, depth-variable

482.6 mm (19) mounting angle at the front,
cranked mounting angle screw-fastened to TS punched sections with
mounting flanges as support strips

Gland plate mounted at front as infill panel 1
Gland plate, one-piece, vented, with cable entry 1
Roof plate for cable entry, two-piece 1
Including side panels 2
Model No. DK 1 7830.100 7830.110 7830.850 7830.200
Supply includes
Baying kit TS 8800.500 1 set
Base/plinth vented, 100 mm high 1
Earthing of all enclosure panels pre-configured 1 set
Levelling feet (incl. base/plinth adaptor) 4
Spacers for raising the roof 4
Cable clamp rails for the inner frame level 4
Cable shunting rings, plastic 10
Captive nuts M6, conductive 50
Multi-tooth screws M6 50
Accessories
Side panel, lockable, see page 387 2 7824.188
Pre-configured, doors unvented
Pre-configured, doors vented
U Packs of 42 42 42 42 47
Width (B) mm 800 800 800 800 800
Height (H1 + H2) mm 2000 + 100 2000 + 100 2000 + 100 2000 + 100 2200 + 100
Depth (T) mm 800 800 1000 1000 800
Distance between levels, pre-configured mm 498 498 498 498 498
Glazed aluminium door at the front, 180,
with comfort handle for semi-cylinder and security lock 3524 E
1

Model No. DK 1 7830.250 7830.202 7830.230 7830.240 7830.270
Supply includes
Also included:
Compact light (8 W), mounting kit (magnetic), 482.6 mm (19) socket strip,
7-way (earthing-pin), door-operated switch, junction box incl. connection
accessories, 482.6 mm (19) component shelf (500 mm) incl. mounting
accessories

Accessories
Side panel, lockable, see page 387 2 7824.208 7824.200 7824.228
U Packs of 24 42 42 47
Width (B) mm 800 800 800 800
Height (H1 + H2) mm 1200 + 100 2000 + 100 2000 + 100 2200 + 100
Depth (T) mm 1000 1000 1000 1000
Distance between levels, pre-configured mm 740 740 740 740
Glazed sheet steel door at the front, 180,
1
Vented sheet steel door at the rear, 180,
with handle and security lock 3524 E
1
482.6 mm (19) mounting level at the front and rear, L-shaped mounting
angles screw-fastened onto 2 or 3 support strips, depth-variable

Model No. DK 1 7830.130 7830.330 7830.335 7830.380
1)

Supply includes
Accessories
Side panel, lockable, see page 387 2 7824.200 7824.220
1)
Pre-configured, doors/rear wall unvented
Pre-configured, doors unvented, divided
U Packs of 42 40
Height (H1 + H2 + H3) mm 2000 + 100 + 25 2000 + 100 + 25
Distance between levels, pre-configured mm 498
Glazed aluminium door at the front, 180,
1
Sheet steel rear panel 1
L-shaped mounting angles screw-fastened onto support strips,
depth-variable

Swing frame, large, with side trim panel for the installation of 482.6 mm (19)
mounting components whilst utilising the full enclosure height
(130, 150 kg static load capacity)

Roof plate with cut-out for fan insert and vent panel on spacers 1
Model No. DK 1 7830.550 7830.670
Supply includes
Accessories
Side panel, lockable, see page 387 2 7824.208 7824.208
U Packs of 42
Width (B) mm 800
Height (H1 + H2) mm 2000 + 100
Depth (T) mm 800
Distance between levels, pre-configured mm 498
Glazed sheet steel door at front, vertically divided, 180 1
Sheet steel door at rear, vertically divided, 180 1

Roof plate for cable entry, two-piece, with cut-out for fan insert
and vent panel on spacers
1
Model No. DK 1 7830.260
Supply includes
Accessories
Side panel, lockable, see page 387 2 7824.208
Material:
Sheet steel
safety glass, 3 mm
Surface finish:
Enclosure frame:
Dipcoat-primed
Doors and roof: Dipcoat-
primed, powder-coated
Base plates and punched
sections with mounting
flanges: Zinc-plated
Colour:
RAL 7035
IP 55 to IEC 60 529
in connection with side panels,
screw-fastened
Supply includes:
see table.
Approvals:
UL
cUL
Detailed drawing:
U 15 15 20 20 24 24 24 24
Width mm 600 600 600 600 600 600 800 800
Height mm 800 800 1000 1000 1200 1200 1200 1200
Depth mm 600 600 600 600 600 600 600 600
Model No. DK 7820.100 7821.100 7820.200 7821.200 7820.300 7821.300 7820.340
1)
7821.340
Supply includes
Glazed aluminium door at the front (180),

Sheet steel door at the front (180),

Sheet steel door at the rear (130),

Gland plate, multi-piece, solid
Roof plate, solid
Base/plinths see page 360
U 24 29 29 33 33 33 33
Width mm 800 600 600 600 600 600 600
Height mm 1200 1400 1400 1600 1600 1600 1600
Depth mm 800 800 800 600 600 800 800
Model No. DK 7820.350 7820.410 7821.410 7820.500 7821.500 7820.510 7821.510
Supply includes



Roof plate, solid
1)
U 38 38 38 38 38 38
Width mm 600 600 600 600 800 800
Height mm 1800 1800 1800 1800 1800 1800
Depth mm 600 600 800 800 800 800
Model No. DK 7820.600 7821.600 7820.610 7821.610 7820.650 7821.650
Supply includes



Roof plate, solid
U 42 42 42 42 42 42
Width mm 600 600 600 600 600 600
Height mm 2000 2000 2000 2000 2000 2000
Depth mm 600 600 800 800 1000 1000
Model No. DK 7820.700 7821.700 7820.710 7821.710 7820.730 7821.730
Supply includes



Roof plate, solid
U 42 42 42 42 42 42
Width mm 800 800 800 800 800 800
Height mm 2000 2000 2000 2000 2000 2000
Depth mm 600 600 800 800 1000 1000
Model No. DK 7820.740 7821.740 7820.750 7821.750 7820.770 7821.770
Supply includes



Roof plate, solid
U 47 47 47 47 47 47
Width mm 600 600 600 600 800 800
Height mm 2200 2200 2200 2200 2200 2200
Depth mm 600 600 800 800 800 800
Model No. DK 7820.800 7821.800 7820.810 7821.810 7820.850 7821.850
Supply includes



Roof plate, solid
Benefits:
No frame structure
Optimum accessibility
Readily dismantled and
therefore easily installed
Material:
Sheet steel
safety glass, 4 mm
Surface finish:
Mounting frame:
Dipcoat-primed
Enclosure panels:
Powder-coated
Colour:
RAL 7035
Supply includes:
see table.
Detailed drawing:
Pre-configured
Width mm 800 800 800
Height (enclosure + pase/plinth) mm 1200 + 100 2000 + 100 2000 + 100
Depth mm 800 800 800
Distance between levels, pre-configured mm 495 495 495
Model No. TE 1 7000.840 7000.850 7000.852
Supply includes
Self-supporting 482.6 mm (19) mounting frame, front and rear, depth-variable 2
Glazed door at the front, incl. 130 hinge, recessed handle and security lock 3524 E 1
Sheet steel door at the rear, including 130 hinge, security lock 3524 E 1
Side panels, lockable, including security lock 3524 E 2 7000.652 388
Base frame with maximum cut-out (for optional population with module plates) 1
Roof plate including brush strip for cable entry and concealed cut-out for optional fan 1
Levelling feet (including base/plinth adaptor) supplied loose 4
Spacers, 20 mm, supplied loose to raise the roof 4
Base/plinth 100 mm, vented 1
Tested frame earthing to IEC 60 950, fitted
C rails, for cable clamping in the enclosure depth via cable clamps, supplied loose 4
Cable shunting rings made of plastic, 105 x 70 mm, supplied loose 10
Multi-tooth screw M6, with plastic washers 50
Accessories
Baying kit 1 set 7000.640 7000.640 400
Ergoform-S handle for semi-cylinder, to exchange for the existing lock 1 2435.000 2435.000 2435.000 419
Fan unit, with 2 fans and thermostat, pre-wired ready for connection 1 7000.670 7000.670 7000.670 224
Slide rail for TE, for attachment between the 482.6 mm (19) mounting frames,
length 424 mm
2 7963.410 7963.410 7963.410 560
482.6 mm (19) component shelf for static installation, for direct screw fastening
without an installation kit, 413 mm deep, load capacity 30 kg, static
1 7000.620 7000.620 7000.620 483
482.6 mm (19) component shelf, complete set, pull-out, 500 mm deep,
load capacity 50 kg static
1 set 7000.625 7000.625 7000.625 486
Socket strip, 8-way 1 7000.630 7000.630 7000.630 506
Transport castors (only without base/plinth) 4 7000.672 7000.672 7000.672 375
Benefits:
No frame structure
Material:
Sheet steel
safety glass, 4 mm
Surface finish:
Mounting frame:
Dipcoat-primed
Enclosure panels:
Powder-coated
Colour:
RAL 7035
Supply includes:
see table.
Detailed drawing:
600 mm width
U Packs of 11 11 24 24 42 42 47 47 Page
Width mm 600 600 600 600 600 600 600 600
Height mm 600 600 1200 1200 2000 2000 2200 2200
Depth mm 600 800 600 800 600 800 600 800
Distance between levels, pre-configured mm 495 495 495 495 495 495 495 495
Model No. TE 1 7000.390 7000.410 7000.430 7000.440 7000.500 7000.510 7000.560
1)
7000.570
1)

Supply includes
Self-supporting 482.6 mm (19) mounting frame,
front and rear, depth-variable
2
Glazed door at the front, incl. 130 hinge, recessed
handle and security lock 3524 E
1
Sheet steel door at the rear, including 130 hinge,
security lock 3524 E
1
Side panels, lockable, including security lock 3524 E 2
Base frame with maximum cut-out
(for optional population with module plates)
1
Roof plate including brush strip for cable entry
and concealed cut-out for optional fan
1
Levelling feet, M10, supplied loose 4
Accessories
Base/plinth components, front and rear, vented 1 set 7825.601 7825.601 7825.601 7825.601 7825.601 7825.601 7825.601 7825.601 361
Base/plinth trim panels, side 1 set 8601.065 8601.085 8601.065 8601.085 8601.065 8601.085 8601.065 8601.085 362
Baying kit 4 7000.640 7000.640 7000.640 7000.640 7000.640 7000.640 7000.640 7000.640 400
Fan unit, with 2 fans and thermostat,
pre-wired ready for connection
1 7000.670 7000.670 7000.670 7000.670 7000.670 7000.670 7000.670 7000.670 224
Earthing kit 1 set 7000.675 7000.675 7000.675 7000.675 7000.675 7000.675 7000.675 7000.675 503
Socket strip, 8-way 1 7000.630 7000.630 7000.630 7000.630 7000.630 7000.630 7000.630 7000.630 506
482.6 mm (19) component shelf, complete set,
pull-out, 500 mm deep, load capacity 50 kg static
1 set 7000.625 7000.625 7000.625 7000.625 7000.625 7000.625 7000.625 7000.625 486
Transport castors (only without base/plinth) 4 7000.672 7000.672 7000.672 7000.672 7000.672 7000.672 7000.672 7000.672 375
1)
800 mm width
U Packs of 24 24 42 42 42 47 47 47 Page
Width mm 800 800 800 800 800 800 800 800
Height mm 1200 1200 2000 2000 2000 2200 2200 2200
Depth mm 600 800 600 800 800 600 800 800
Distance between levels, pre-configured mm 495 495 495 495 495 495 495 495
Model No. TE 1 7000.450
1)
7000.460 7000.520 7000.530 7000.532 7000.580
1)
7000.590 7000.592
1)

Supply includes
Self-supporting 482.6 mm (19) mounting frame,
2
Glazed door at the front, incl. 130 hinge, recessed
handle and security lock 3524 E
1
Sheet steel door at the rear, including 130 hinge,
1
Side panels, lockable, including security lock 3524 E 2
Base frame with maximum cut-out
(for optional population with module plates)
1
Roof plate including brush strip for cable entry
and concealed cut-out for optional fan
1
Levelling feet (including base/plinth adaptor)
supplied loose
4
Accessories
Base/plinth components, front and rear, vented 1 set 7825.801 7825.801 7825.801 7825.801 7825.801 7825.801 7825.801 7825.801 361
Base/plinth trim panels, side 1 set 8601.065 8601.085 8601.065 8601.085 8601.085 8601.065 8601.085 8601.085 362
Baying kit 4 7000.640 7000.640 7000.640 7000.640 7000.640 7000.640 400
Fan module, with 2 fans and thermostat,
pre-wired ready for connection
1 7000.670 7000.670 7000.670 7000.670 7000.670 7000.670 7000.670 7000.670 224
Earthing kit 1 set 7000.675 7000.675 7000.675 7000.675 7000.675 7000.675 7000.675 7000.675 503
Socket strip, 8-way 1 7000.630 7000.630 7000.630 7000.630 7000.630 7000.630 7000.630 7000.630 506
482.6 mm (19) component shelf, complete set,
pull-out, 500 mm deep, load capacity 50 kg static
1 set 7000.625 7000.625 7000.625 7000.625 7000.625 7000.625 7000.625 7000.625 486
Transport castors (only without base/plinth) 4 7000.672 7000.672 7000.672 7000.672 7000.672 7000.672 7000.672 7000.672 375
1)
Rittal Norway
RITTAL AS
Postboks 258 N-1401 Ski
Phone: +47 64 85 13 00 Fax: +47 64 85 13 01
Besksadresse: Regnbueveien 10
N-1405 Langhus
E-mail: [email protected] www.rittal.no
Distributor racks
482.6 mm (19) installation system Page 559 Monitoring Page 577 Power System Module Page 201
Benefits:
Optimum accessibility from all
sides during assembly and
installation.
Unrestricted airflow, due to
the open design.
Standard cable trays in the
roof area for larger quantities
of cables.
The distance between
attachment levels is infinitely
variable.
Material:
Sheet steel
Colour:
RAL 7035
Surface finish:
Powder-coated
Load capacity:
700 kg, static
Supply includes:
Self-supporting mounting
frame, with 482.6 mm (19)
mounting level front and rear
Open roof frame for cable
entry
3 cable routing trays
Open base frame with
2 punched sections with
mounting flanges for indivi-
dual configuration fitted in the
width
Levelling feet
Detailed drawings:
1
9
H
E
T
H
B
TE 7000 open
U (HE) Packs of 42 42 Page
Height
1)
(H) mm 2000 2000
Depth (T) mm 1000 1000
Distance between levels (mm) as delivered 745 745
Model No. TE 1 7000.940 7000.944
Accessories
Cable management panel 482.6 mm (19), 1 U for horizontal cable routing,
with 5 steel rings, zinc-plated, passivated, size 105 x 43 mm
1 7257.035 7257.035 539
Cable management panel 482.6 mm (19), 2 U for horizontal cable routing,
with 5 steel rings, zinc-plated, passivated, size 125 x 85 mm
1 7257.100 7257.100 539
Shunting rings to accommodate large quantities of cables,
for mounting on the side of the mounting frame, dimension 330 x 90 mm
4 7220.600 7220.600 534
Cable management duct 482.6 mm (19), 2 U for horizontal cable routing,
with removable front panel
1 7158.100 7158.100 541
Component shelf 482.6 mm (19),
1
/2 U static installation,
depth-variable in the range from 600 900 mm
1 7063.720 7063.720 485
Slide rail 482.6 mm (19), load capacity 100 kg,
for 740 mm distance between 482.6 mm (19) levels (internal)
2 7063.740 7063.740 560
Slide rail 482.6 mm (19), depth-variable within the range from 590 930 mm,
load capacity 80 kg, static
2 7063.883 7063.883 559
C rail, variable within the range 450 800 mm 1 7016.140 7016.140 532
T-head rail, variable within the range 450 800 mm 1 7016.150 7016.150 532
Cable route for vertical cable management, for mounting at the side rear
of the 482.6 mm (19) mounting frame, W = 100 mm, H = 1700 mm
1 set 7000.685 7000.685 536
Cable duct, 42 U 1 7827.320 7827.320 538
Cable manager, basic kit, for system-compatible cable deflection 8 7064.100 7064.100 533
Cable routing bars for 482.6 mm (19) system punchings 4 7111.224 7111.224 537
1)
Plus 100 mm roof-mounting/cable-routing trays.
Distributor racks
482.6 mm (19) installation system Page 558 Monitoring Page 577 Power System Module Page 201
Material:
Profile frame, base/plinth:
Sheet steel
Feet: Die-cast zinc
Colour:
Profile frame, base/plinth:
RAL 7035
Trim panel, feet: RAL 5018
Load capacity:
Max. 150 kg, static/level
Supply includes:
Torsionally stiff profile frame
with 482.6 mm (19) punch-
ings
Stable base/plinth with
integral feet, with the option
for base anchoring
Assembly parts
Note:
Order second mounting level
separately.
Detailed drawings:
T
1
H
B
T
2
Data Rack
U
Packs
of
31 36 40 45 Page
Width (B) mm 550 550 550 550
Height (H) mm 1499.5 1721.8 1899.5 2121.8
Depth (T1) mm 750 750 750 750
Distance from the second mounting level (T2) mm
1)
min. 150 max. 350
Model No. DK 1 7391.000 7396.000 7400.000 7445.000
Accessories
Second mounting level
1)
1 7296.000 7297.000 7298.000 7299.000 558
Baying connector 3 7494.000 7494.000 7494.000 7494.000 558
Levelling feet 4 7493.000 7493.000 7493.000 7493.000 373
Cable duct, 42 U 1 7827.320 7827.320 7827.320 7827.320 538
C rails, 482.6 mm (19) 6 7016.100 7016.100 7016.100 7016.100 542
Cable clamp rails, 482.6 mm (19) 6 7016.110 7016.110 7016.110 7016.110 542
Cable clamp strap D = 250 mm 6 7016.120 7016.120 7016.120 7016.120 542
Twin castors 4 7495.000 7495.000 7495.000 7495.000 374
Depth stays 2 7401.000 7401.000 7401.000 7401.000 558
Component shelf 2 U for one pair of mounting angles D = 250 mm 1 7119.250 7119.250 7119.250 7119.250 487
Component shelf 2 U for one pair of mounting angles D = 400 mm 1 7119.400 7119.400 7119.400 7119.400 487
Component shelf 2 U for one pair of mounting angles D = 300 mm
3)
1 7148.035 7148.035 7148.035 7148.035 485
Drawer 2 U for one pair of mounting angles 1 7281.035 7281.035 7281.035 7281.035 614
Component shelf D = 300 mm
2) 3)
1 7143.035 7143.035 7143.035 7143.035 482
2) 3)
1 7144.035 7144.035 7144.035 7144.035 482
2) 3)
1 7145.035 7145.035 7145.035 7145.035 482
Slide rails D max. < 190 mm 10 1962.200 1962.200 1962.200 1962.200 548
Slide rails D max. > 190 mm 10 1963.200 1963.200 1963.200 1963.200 548
Slide rails for two pairs of mounting angles
1)

2)

4)
2 7402.000 7402.000 7402.000 7402.000 558
1)
Second mounting level may be positioned on a 50 mm pitch pattern.
2)
A second pair of mounting angles is required for assembly.
3)
Stationary installation or full withdrawal, telescopic slides, see page 489.
4)
350 mm distance between levels (T2), can be combined with component shelf D = 500 mm.
90
91
Server enclosures
Server enclosures TS 8
Colocation ...................................................................................................93
For High Performance Cooling systems HPC .............................................94
Server enclosures TE 7000
Material:
Sheet steel
Surface finish:
Enclosure frame:
Dipcoat-primed
Enclosure panels:
Dipcoat-primed,
powder-coated
Mounting angles, mounting
frame and punched sections
with mounting flanges:
Zinc-plated
Colour:
RAL 7035
Supply includes:
see table.
Detailed drawing:
U Packs of 24 42 42 47 42 42 Page
Width mm 600 600 600 600 800 800
Height mm 1200 2000 2000 2200 2000 2000
Depth mm 1000 1000 1200 1000 1000 1200
Distance between levels, pre-configured mm 740 740 740 740 740 740
482.6 mm (19) level, flat mounting angles on punched
sections with mounting flanges, front and rear, depth-variable
2
482.6 mm (19) mounting frames, front and rear, depth-variable 2
Model No. DK 1 7831.433
2)
7831.438 7831.481 7831.442 7831.446 7831.485
Supply includes
Enclosure frame 1
Sheet steel doors, vented
1)
, front and rear 2
Levelling feet 4
Open base, without base frame 1
Comfort handle for semi-cylinder with security lock 3524 E 2
Accessories
Side panels, lockable 2 7824.120 7824.200 7824.220 7824.200 387
Side panel, plug-type, divided 1 7824.310 7824.310 388
Base mounting bracket 4 8800.210 8800.210 8800.210 8800.210 8800.210 8800.210 376
Depth-variable slide rail, 1 U 2 7063.883 7063.883 7063.883 7063.883 7063.883 7063.883 559
Stabiliser, pull-out 1 7825.250 7825.250 7825.260
2)
7825.250 7825.250 7825.260
2)
372
1)
Vented surface area > 78% perforated.
2)
Design features
Robust frame structure
Front and rear door fully
vented; vented surface area
> 78% perforated
2-point locking
Door hinge may be swapped
to opposite side without
machining
Cable entry via the base/plinth
and roof (optional)
Bayable at all levels
Static load capacity of up to
1000 kg
Material:
Sheet steel
Surface finish:
Enclosure frame:
Dipcoat-primed
Enclosure panels:
Dipcoat-primed,
powder-coated
Mounting angles, mounting
frame and punched sections
with mounting flanges:
Zinc-plated
Colour:
RAL 7035
Supply includes:
see table.
Detailed drawing:
Colocation
Number of front and rear doors Packs of 2/2 4/4 Page
U 2 x 21 4 x 10
Width mm 600 600
Height mm 2200 2200
Depth mm 1000 1000
Distance between levels, pre-configured mm 740 740
Model No. DK 1 7831.453
1)
7831.463
1)
Supply includes
Sheet steel doors, vented, front and rear with 180 hinges
Roof plate, solid 1
Levelling feet 4
482.6 mm (19) levels, flat mounting angles on punched sections with mounting flanges,

Earthing of all enclosure panels pre-configured
Individual compartments, shielded/separate cable routing per compartment
Comfort handle for semi-cylinder with security lock 3524 E
Accessories
Side panels, lockable 2 7824.220 7824.220 387
Base mounting bracket 4 8800.210 8800.210 376
Depth-variable slide rail, 1 U 2 7063.883 7063.883 559
Semi-cylinder for individual lock 2 9785.042 9785.042 416
Quick-fit baying clamps 6 8800.500 8800.500 395
Stabiliser, pull-out 1 7825.250 7825.250 372
1)
System accessories Page 355 Baying system Page 394 Monitoring Page 577
Load capacity:
Max. static load capacity of the
interior installation 1000 kg
Material:
Sheet steel
safety glass, 4 mm
Surface finish:
Enclosure frame:
Dipcoat-primed
Enclosure panels:
Additionally powder-coated
Gland plates and 482.6 mm
(19) mounting frame:
Zinc-plated
Colour:
RAL 7035
IP 54 to IEC 60 529, in conjunc-
tion with solid roof plate (bayed
option) and additional screw-
fastened side panels with stand-
alone siting.
Supply includes:
see table.
For High Performance Cooling systems HPC
U Packs of 42 42 42 42 42 42 Page
Width mm 600 600 600 800 800 800
Height mm 2000 2000 2000 2000 2000 2000
Depth mm 1000 1200 1200 1000 1200 1200
Distance between levels, pre-configured mm 740 740 740 740 740 740
Including side panels
Model No. DK 1 7831.810
1)
7831.812
1)
7831.813
1)
7831.800
1)
7831.802
1)
7831.803
1)

Supply includes
Glazed aluminium door at the front (180) 1
Sheet steel door at the rear (130) 1
Comfort handle front and rear for semi-cylinder,
2
Levelling feet 4
Base frame with multi-piece gland plate 1
482.6 mm (19) mounting frames, front and rear, depth-variable 2
Accessories
Side panel, screw-fastened, IP 55 2 8100.235 8100.235 385
Depth-variable slide rail, 1 U, length 590 930 mm,
80 kg, static
2 7063.883 7063.883 7063.883 7063.883 7063.883 7063.883 559
482.6 mm (19) heavy-duty component shelf, 700 mm deep,
100 kg static load capacity
1 7063.897 7063.897 7063.897 7063.897 7063.897 7063.897 484
Installation kit for heavy-duty component shelf, depth-variable 1 set 7063.890 7063.890 7063.890 7063.890 7063.890 7063.890 488
Liquid Cooling Package see page 279
1)
Server enclosures TE 7000
Benefits:
No frame structure
Material:
Sheet steel
Surface finish:
Mounting frame:
Dipcoat-primed
Enclosure panels:
Powder-coated
Colour:
See table.
Supply includes:
see table.
Detailed drawing:
U Packs of 24 42 42 42 42 Page
Width mm 600 600 600 800 800
Height mm 1200 2000 2000 2000 2000
Depth mm 1000 1000 1000 1000 1000
Distance between levels, pre-configured mm 745 745 745 745 745
Colour RAL 7035 RAL 7035 RAL 9005 RAL 7035 RAL 9005
Model No. TE 1 7000.875 7000.882 7000.885 7000.892 7000.895
Supply includes
Self-supporting 482.6 mm (19) mounting frame, front and rear,
depth-variable
2
Sheet steel door vented
2)
, front with moulded handle, 130 hinge,
1
Sheet steel door vented
2)
, rear with moulded handle, 130 hinge,
1
Levelling feet 4
Roof plate including brush strip for cable entry and optional fitting
with an active fan unit
1
Base frame with maximum cut-out for optional fitting
with module plates, solid, passively vented or for cable entry
1
Accessories
Side panels, lockable, including security lock 3524 E 2 7000.653 7000.663 7000.653 7000.663 388
Baying kit 1 set 7000.640 400
Ergoform-S handle for semi-cylinder, to exchange for the existing lock 1 2435.000 2435.000 2452.000
1)
2435.000 2452.000
1)
419
Fan unit, with 2 fans and thermostat, pre-wired ready for connection 1 7000.670 7000.670 7000.670 224
Transport castors, including assembly parts 4 7000.672 7000.672 7000.672 7000.672 7000.672 375
C rail, for cable clamping in the enclosure width via cable clamps,
on the 482.6 mm (19) mounting frame at the rear
4 7828.060 7828.060 7828.060 7828.060 7828.060 465
Slide rail, 482.6 mm (19) for 740 mm distance between levels 2 7063.740 7063.740 7063.740 7063.740 7063.740 560
Cable clamp rail, depth-variable 500 895 mm,
for cable attachment in the enclosure depth via cable ties
4 7858.162 7858.162 7858.162 7858.162 7858.162 532
Cable clamp rail, for cable attachment in the enclosure width
via cable ties, on the 482.6 mm (19) mounting frame at the rear
4 7828.062 7828.062 7828.062 7828.062 7828.062 532
Earthing kit for TE 1 set 7000.675 7000.675 7000.675 7000.675 7000.675 503
Socket strip for TE, 8-way for earthing-pin plugs 1 7000.630 7000.630 7000.630 7000.630 7000.630 506
1)
Matt nickel-plated
2)
Vented surface area > 67% perforated.
96
97
TopConsole system TP
Overview of mounting components.............................................................99
Combination options .................................................................................100
600 mm wide.............................................................................................101
800 mm wide.............................................................................................102
1200 mm wide...........................................................................................103
1600 mm wide...........................................................................................104
Accessories...............................................................................................105
One-piece consoles TP
One-piece consoles TP.............................................................................106
Universal consoles TP
Universal consoles TP...............................................................................107
PC enclosure systems
PC enclosure systems TS 8.......................................................................108
Enclosure for tower PC..............................................................................109
Industrial Workstations
Combination options .................................................................................110
IW enclosures and worktops .....................................................................111
Console systems/
PC enclosure systems/
98
1
1
1
2
2
3
3
4
4
4
4
1
5
7
8
99
Overview of mounting components
Punched section with mounting flange, 17 x 73 mm
Support strips
Partial mounting plates
Gland plates
Cable entry grommets
Base/plinth
Assembly bolts for base/plinth
1
2
3
4
5
6
7
8
1
1
2
4
4
5
5
6
7
System accessories Page 355 Monitors, keyboards From page 606 Climate control Page 207
Material:
Enclosure:
Sheet steel 1.5 mm
Door and console cover:
Sheet steel, 2.0 mm,
Mounting plate:
Sheet steel 2.5 mm
Surface finish:
textured paint
Mounting plate zinc-coated
on bottom part
Colour:
RAL 7035
IP 55 to IEC 60 529,
complies with NEMA 12
(provided suitable gland plates
are selected)
Supply includes:
Console
Enclosure
Cover hinged at bottom,
including cover retainer
cable entry
Console, deep
Enclosure
Front cover hinged at bottom,
including cover retainer
Rear door, hinged at bottom
cable entry
Desk section
Enclosure
Cover hinged, 2 stays with
automatic locking and unlock-
ing
Opening for running cables
into the enclosure base
Pedestal
Enclosure open at top
Door or double door with lock-
ing rod (with depth 400 mm at
the front, with depth 500 mm
at the front and rear)
Depth-adjustable mounting
plate (with depth 500 mm)
cable entry
Also required:
Gland plates, see page 378.
Approvals:
CE
UL
cUL
Detailed drawings:
T
H
B
T
H
H
T
Consoles
Desk units
Base/plinth
Pedestals
1-part 2-part 3-part
Combination options
600 mm wide
Configuration 3-part 2-part 2-part 1-part
Depth of pedestal in mm 400 500 400 500 400 500 400 500
Consoles 700 mm high
Height (H) mm
Packs
of
700 Page
Depth (T) mm 240
Model No. TP 1 6720.500
Consoles 540/730 mm high with enlarged installation depth
Height (H) mm
Packs
of
730 540 Page
Model No. TP 1 6720.200 6720.100
Accessories
Partial mounting plate
Width 200 mm 1 6730.310 6730.310
1)
450
Width 500 mm 1 6730.330 6730.330
1)
450
For width 4 5001.050 5001.050 459
For height 4 5001.051 5001.050 459
Desk units
Height (H) mm
Packs
of
235 235 Page
Model No. TP 1 6714.500 6710.500
Accessories
Rail for interior installation For width 4 5001.050 5001.050 459
Strengthener 1 6730.400 105
Trim panel for pedestal 1 5001.130 6370.100 105
Pedestals
Height (H) mm
Packs
of
675 675 675 675 675 675 675 Page
Depth (T) mm 400 500 400 500 500 400 500
Model No. TP 1 6700.500 6704.500 6700.500 6704.500 6704.500 6700.500 6704.500
Accessories
Base/plinth components
front and rear
Height 100 mm 1 set 8601.600 8601.600 8601.600 8601.600 8601.600 8601.600 8601.600 361
Height 200 mm 1 set 8602.600 8602.600 8602.600 8602.600 8602.600 8602.600 8602.600 361
Base/plinth trim panels, side
Height 100 mm 1 set 8601.040 8601.050 8601.040 8601.050 8601.050 8601.040 8601.050 362
Height 200 mm 1 set 8602.040 8602.050 8602.040 8602.050 8602.050 8602.040 8602.050 362
Cross member, adjustable 2 8601.450 8601.450 8601.450 8601.450 8601.450 8601.450 8601.450 370
Gland plates
1-part 1 5001.222 5001.222 5001.222 379
2-part
1 5001.214 5001.214 5001.214 5001.214 5001.214 5001.214 5001.214 379
+ + + + + + +
1 5001.218 5001.222 5001.218 5001.222 5001.222 5001.218 5001.222 379
Individual For more gland plate variants, see page 381
Rail for interior installation For height 4 5001.050 5001.050 5001.050 5001.050 5001.050 5001.050 5001.050 459
Punched section with
mounting flange, 17 x 73 mm
In the depth 4 8612.140 8612.150 8612.140 8612.150 8612.150 8612.140 8612.150 459
Punched rail 18 x 38 mm In the depth 4 8612.240 8612.250 8612.240 8612.250 8612.250 8612.240 8612.250 462
Support strips In the depth 20 4694.000 4695.000 4694.000 4695.000 4695.000 4694.000 4695.000 462
For door 4 8612.050 8612.050 8612.050 8612.050 8612.050 8612.050 8612.050 459
Support strips For door 20 4596.000 4596.000 4596.000 4596.000 4596.000 4596.000 4596.000 462
Cable clamp rail 1 5001.080 5001.080 5001.080 5001.080 5001.080 5001.080 5001.080 527
Wiring plan pocket 1 4116.500 4116.500 4116.500 4116.500 4116.500 4116.500 4116.500 429
1)
Configuration examples and further details of the accessories required may be found on the Internet.
800 mm wide
Height (H) mm
Packs
of
700 Page
Depth (T) mm 240
Model No. TP 1 6721.500
Height (H) mm
Packs
of
730 540 Page
Model No. TP 1 6721.200 6721.100
Accessories
Width 200 mm 1 6730.310 6730.310
1)
450
Width 500 mm 1 6730.330 6730.330
1)
450
Width 700 mm 1 6730.340 6730.340
1)
450
For width 4 5001.051 5001.051 459
For height 4 5001.051 5001.050 459
Desk units
Height (H) mm
Packs
of
235 235 Page
Model No. TP 1 6715.500 6711.500
Accessories
Strengthener 1 6730.410 105
Pedestals
Height (H) mm
Packs
of
675 675 675 675 675 675 675 Page
Depth (T) mm 400 500 400 500 500 400 500
Model No. TP 1 6701.500 6705.500 6701.500 6705.500 6705.500 6701.500 6705.500
Accessories
front and rear
Height 100 mm 1 set 8601.800 8601.800 8601.800 8601.800 8601.800 8601.800 8601.800 361
Height 200 mm 1 set 8602.800 8602.800 8602.800 8602.800 8602.800 8602.800 8602.800 361
Height 100 mm 1 set 8601.040 8601.050 8601.040 8601.050 8601.050 8601.040 8601.050 362
Height 200 mm 1 set 8602.040 8602.050 8602.040 8602.050 8602.050 8602.040 8602.050 362
Gland plates
1-part 1 5001.223 5001.223 5001.223 379
2-part
1 5001.215 5001.215 5001.215 5001.215 5001.215 5001.215 5001.215 379
+ + + + + + +
1 5001.219 5001.223 5001.219 5001.223 5001.223 5001.219 5001.223 379
In the depth 4 8612.140 8612.150 8612.140 8612.150 8612.150 8612.140 8612.150 459
For door 4 8612.050 8612.050 8612.050 8612.050 8612.050 8612.050 8612.050 459
Cable clamp rail 1 5001.081 5001.081 5001.081 5001.081 5001.081 5001.081 5001.081 527
1)
1200 mm wide
Height (H) mm
Packs
of
700 Page
Depth (T) mm 240
Model No. TP 1 6722.500
Height (H) mm
Packs
of
730 540 Page
Model No. TP 1 6722.200
3)
6722.100
3)

Accessories
Width 200 mm 1 6730.310 6730.310
1)
450
Width 500 mm 1 6730.330 6730.330
1)
450
Width 700 mm 1 6730.340 6730.340
1)
450
For width 4 5001.053 5001.053 459
For height 4 5001.051 5001.050 459
Desk units
Height (H) mm
Packs
of
235 235 Page
Model No. TP 1 6716.500 6712.500
Accessories
Pedestals
Height (H) mm
Packs
of
675 675 675 675 675 675 675 Page
Depth (T) mm 400 500 400 500 500 400 500
Model No. TP 1 6702.500 6706.500 6702.500 6706.500 6706.500 6702.500 6706.500
Accessories
front and rear
Height 100 mm 1 set 8601.200 8601.200 8601.200 8601.200 8601.200 8601.200 8601.200 361
Height 200 mm 1 set 8602.200 8602.200 8602.200 8602.200 8602.200 8602.200 8602.200 361
Height 100 mm 1 set 8601.040 8601.050 8601.040 8601.050 8601.050 8601.040 8601.050 362
Height 200 mm 1 set 8602.040 8602.050 8602.040 8602.050 8602.050 8602.040 8602.050 362
Gland plates
2)

1-part 1 5001.225 5001.225 5001.225 379
2-part
1 5001.217 5001.217 5001.217 5001.217 5001.217 5001.217 5001.217 379
+ + + + + + +
1 5001.221 5001.225 5001.221 5001.225 5001.225 5001.221 5001.225 379
In the depth 4 8612.140 8612.150 8612.140 8612.150 8612.150 8612.140 8612.150 459
For door 4 8612.050 8612.050 8612.050 8612.050 8612.050 8612.050 8612.050 459
Cable clamp rail 1 5001.083 5001.083 5001.083 5001.083 5001.083 5001.083 5001.083 527
1)
2)
With the two-door pedestal, the base opening is divided in two, and two sets of gland plates are required!
3)
1600 mm wide
Height (H) mm
Packs
of
700 Page
Depth (T) mm 240
Model No. TP 1 6723.500
Height (H) mm
Packs
of
730 540 Page
Model No. TP 1 6723.200 6723.100
Accessories
Width 200 mm 1 6730.310 6730.310
1)
450
Width 500 mm 1 6730.330 6730.330
1)
450
Width 700 mm 1 6730.340 6730.340
1)
450
Rail for interior installation For height 4 5001.051 5001.050 459
Desk units
Height (H) mm
Packs
of
235 235 Page
Model No. TP 1 6717.500 6713.500
Accessories
Pedestals
Height (H) mm
Packs
of
675 675 675 675 675 675 675 Page
Depth (T) mm 400 500 400 500 500 400 500
Model No. TP 1 6703.500 6707.500 6703.500 6707.500 6706.500 6703.500 6707.500
Accessories
front and rear
Height 100 mm 1 set 8601.920 8601.920 8601.920 8601.920 8601.920 8601.920 8601.920 361
Height 200 mm 1 set 8602.920 8602.920 8602.920 8602.920 8602.920 8602.920 8602.920 361
Height 100 mm 1 set 8601.040 8601.050 8601.040 8601.050 8601.050 8601.040 8601.050 362
Height 200 mm 1 set 8602.040 8602.050 8602.040 8602.050 8602.050 8602.040 8602.050 362
Gland plates
2)

1-part 1 5001.236 5001.236 5001.236 379
2-part
1 5001.234 5001.234 5001.234 5001.234 5001.234 5001.234 5001.234 379
+ + + + + + +
1 5001.235 5001.236 5001.235 5001.236 5001.236 5001.235 5001.236 379
In the depth 4 8612.140 8612.150 8612.140 8612.150 8612.150 8612.140 8612.150 459
Cable clamp rail Width 800 mm 1 5001.081 5001.081 5001.081 5001.081 5001.081 5001.081 5001.081 527
1)
2)
With the two-door pedestal, the base opening is divided in two, and two sets of gland plates are required!
Accessories
Trim panel
for pedestal
For covering the complete top opening when
using the pedestal on its own.
Material:
Sheet steel
Surface finish:
Textured paint
Colour:
RAL 7035
IP 55 to IEC 60 529,
Supply includes:
Assembly parts.
For pedestal
Model No.
Width mm Depth mm
600
400
5001.130
800 5001.140
1200 5001.160
1600 6730.030
600
500
6730.100
800 6730.110
1200 6730.120
1600 6730.130
Strengthener
for desk unit, rear with hinged cover
Suitable for mounting operating housings using
CP-L enclosure attachment, 130 mm,
CP 6525.510, see page 133
CP-XL enclosure attachment, round
CP 6130.610, see page 141
Housing couplings CP-XL for desk mounting,
CP 6528.410, see page 144
Easily screw-fastened to the base of the desk
unit.
Connection hole pattern for CP support arm
systems in the centre as standard; other posi-
tions can be accommodated by drilling extra
holes.
Mounting cut-out required in the cover of the desk
units, mounting cut-outs to match the various
support arm systems.
Material:
Sheet steel
Supply includes:
Assembly parts.
Mounting cut-outs
for the covers of the desk units
For width
mm
Packs of Model No. TP
600 1 6730.400
800 1 6730.410

9
82
4
5
592/792
2
1
5
1
for external mounting of CP 6525.510
Max. 70 mm 1

9
112
4
5
2
1
5
1
180
= =
7
9
4
5

9
2
1
5
1
One-piece consoles TP
System accessories Page 355 Monitors, keyboards From page 606 Climate control Page 207 One-piece consoles AP stainless steel Page 170
Material:
Enclosure: Sheet steel 1.5 mm
Door and console cover:
Sheet steel, 2.0 mm, all-round
foamed-in PU seal
Mounting plate: Sheet steel
3.0 mm
Lock cover: Plastic,
self-extinguishing
Surface finish:
Enclosure, cover and door:
textured paint
Colour:
RAL 7035
IP 55 to IEC 60 529,
(provided suitable gland plates
are selected).
Supply includes:
Enclosure, solid back and
sides
Door or double door at front,
with locking rod
Mounting plate
Cover hinged at rear, 2 stays
with automatic locking and
unlocking
cable entry
Also required:
Gland plates,
see page 378 380.
Detailed drawings:
T
H
G
F
T
B
Height (H) mm 960 960 960 960
Depth (T) mm
Bottom 400 400 400 400
Top 520 520 520 520
Model No. TP 1 6746.500 6748.500 6740.500 6742.500
Door(s) 1 1 2 2
Base/plinth
Height 100 mm 1 set 8601.600 8601.800 8601.000 8601.200 361
Height 200 mm 1 set 8602.600 8602.800 8602.000 8602.200 361
Trim panels, sides
Height 100 mm 1 set 8601.040 8601.040 8601.040 8601.040 362
Height 200 mm 1 set 8602.040 8602.040 8602.040 8602.040 362
Cross member, adjustable 2 8601.450 8601.450 8601.450 8601.450 370
Accessories
Gland plates
1)

1-part 1 5001.222 5001.223 5001.224 5001.225 379
2-part
1 5001.214 5001.215 5001.216 5001.217
379
+ + + + +
1 5001.218 5001.219 5001.220 5001.221
For enclosures 4 5001.051 5001.051 5001.051 5001.051 157
For cover 4 5001.050 5001.051 5001.052 5001.053 157
Punched section
with mounting flange,
17 x 73 mm
For enclosures 4 8612.140 8612.140 8612.140 8612.140 459
For cover 4 8612.040 8612.040 8612.040 8612.040 459
For door 4 8612.050 8612.040 8612.050 459
Punched rail 18 x 38 mm For enclosures 4 8612.240 8612.240 8612.240 8612.240 462
Cable clamp rail 1 5001.080 5001.081 5001.082 5001.083 527
Wiring plan pocket 1 4116.500 4118.500 4115.500 4116.500 429
1)
With the two-door variant, the base opening is divided in two, and two sets of gland plates are required!
Universal consoles TP
System accessories Page 355 Monitors, keyboards From page 606 Climate control Page 207
Material:
Enclosure, gland plates:
Sheet steel 1.5 mm
Doors: Sheet steel 2.0 mm
3.0 mm
Surface finish:
Enclosure and doors:
textured paint
Mounting plate and gland
plates: Zinc-plated
Colour:
RAL 7035
IP 55 to IEC 60 529,
With a short bottom door
(TP 2694.500), the drawer or
desk section (see below)
should be fitted in order to
preserve the protection
category.
Supply includes:
Enclosure with doors
Mounting plate
Gland plates
Note:
Top door with studs left and right
for installing vertical perforated
mounting strips SZ 2310.038
and horizontal support strips
SZ 2325.000 to be mounted on
top (see page 426/427).
Approvals:
UL
CSA
TV
Germanischer Lloyd
of Shipping
VDE
Detailed drawing:
H
G
F
T
B
T
Packs of with short front door with tall front door Page
Height (H) mm 1300 1300
Depth (T) mm
Bottom 500 500
Top 417.5 417.5
Mounting plate width (F) mm 499 499
Mounting plate height (G) mm 1196 1196
Model No. TP 1 2694.500 2695.500
Weight (kg) 77.0 80.0
Also required
Desk section 2696.500 2696.500
Drawer for keyboard 4757.500
1)

Accessories
Base/plinth
Height 100 mm 1 2807.200 2807.200 369
Height 200 mm 1 2808.200 2808.200 369
Cross member, adjustable 2 8601.450 8601.450 370
Perforated mounting strip 1 2310.038 2310.038 427
Support strips 1 2325.000 2325.000 426
Cable clamp rail 1 4191.000 4191.000 527
1)
Only suitable for installation without a mounting plate.
System accessories Page 355 Monitors, keyboards From page 606 Climate control Page 207 PC case system, stainless steel Page 171
Material:
Enclosure, door, mounting
compartment, supports:
Sheet steel
Handles, decorative trim
panels: Plastic
Door trim panels: Aluminium
IP 55 to IEC 60 529,
Supply includes:
Enclosure, door, rear door and
enclosure-specific supply scope
(see table)
Approvals:
UL
CSA
TV
Germanischer Lloyd
of Shipping
VDE
Detailed drawings/
Technical information:
Enclosure-specific supply scope
Keyboard drawer Packs of Page
Folding keyboard
Desk section
Glazed door, top
Mounting compartment, small
Mounting compartment, large
Component shelf
Width mm 600 600 600 600 600 600 600
Height mm 1600 1600 1600 1600 1600 1600 1600
Depth mm 636 836 636 636 636 836 636
Model No. PC 1 8366.000 8368.000 8366.300 8366.400 8366.100 8368.100 8366.200
Max. keyboard dimensions mm
Width 480 480 480 480 475 475 540
Height 70 70 70 70 60 50 60 50 40
Depth 260 260 260 260 200 250 200 250 175
Weight (kg) 118 133 118 117 118 124 108
Accessories
Base/plinth, stationary 1 8800.920 on request 8800.920 8800.920 8800.920 on request 8800.920 366
front and rear
Height 100 mm 1 set 8601.600 8601.600 8601.600 8601.600 8601.600 8601.600 8601.600 361
Height 200 mm 1 set 8602.600 8602.600 8602.600 8602.600 8602.600 8602.600 8602.600 361
Base/plinth trim, front Height 200 mm 1 8360.920 8360.920 8360.920 8360.920 8360.920 8360.920 8360.920 366
Base/plinth trim, side
Height 100 mm 1 set 8601.060 8601.080 8601.060 8601.060 8601.060 8601.080 8601.060 362
Height 200 mm 1 set 8602.060 8602.080 8602.060 8602.060 8602.060 8602.080 8602.060 362
Cross member, adjustable Height 70 mm 2 8601.680 8601.680 8601.680 8601.680 8601.680 8601.680 8601.680 370
Partial mounting plate Height 775 mm 1 8614.675 8614.675 8614.675 8614.675 8614.675 8614.675 8614.675 448
Component shelf, pull-out 1 6902.960 6902.980 6902.960 6902.960 6902.960 6902.980 6902.960 480
Drawer tray 1 6902.700 6902.700 6902.700 6902.700 6902.700 6902.700 6902.700 481
Paper removal flap 1 6903.200 6903.200 6903.200 6903.200 6903.200 6903.200 6903.200 615
Socket strips see page 505
System accessories Page 355 Comfort Panel Page 116 Optipanel Page 118 TFT monitor Page 606
Compact enclosure, ready to
connect.
Standard commercially avail-
able tower PCs, up to W/H/D:
250 x 530 x 600 mm (max.
20 kg) may be attached securely
to the base screw fastened to
the door using the retaining
strap supplied loose. The rear
interfaces of the PC are readily
accessible with the door open.
Because the socket strip and
fan-and-filter unit are already
pre-installed, the enclosure is
ready for immediate use.
Roof prepared for mounting
Worktop IW 6902.310
Beneath surfaces
Base prepared for mounting
Cast feet IW 6902.920
On surfaces
Material:
Door: Sheet steel
Design strips: Aluminium
Surface finish:
Enclosure: Powder-coated,
textured paint
Door: Powder-coated
Colour:
Enclosure: RAL 7035
Door: RAL 7015
Design strips: RAL 7035
IP 54 to IEC 60 529,
(in conjunction with connector
gland SZ 2400.300/.500
supplied loose)
Supply includes:
Enclosure of all-round solid
construction
R/h door hinge
Door with base screw-
fastened on the inside
Side cam lock
Rear panel with two cut-outs
for use of the connector gland
SZ 2400.300/.500 supplied
loose
Cable gland M20, brass,
nickel-plated
Outlet filter fitted in left side
panel
Fan-and-filter unit fitted in
the right side panel, door-
operated switch,
supply socket for 230 V
power supply, socket strip
with 3 sockets and
overvoltage protection
Also required:
Connection cable for infeed,
see page 495.
Enclosure for tower PC
Width mm Packs of 760 Page
Height mm 760
Depth mm 300
Model No. IW 1 6900.300
Weight (kg) 55
Accessories
Cast feet 2 6902.920 371
Twin castors 1 set 7495.000 374
Worktop without handle 1 6902.310 148
Enclosure attachment, tilting, base mounting 1 6902.640 143
Optipanel for TFT monitor 17 1 6380.040 118
TFT monitor 17 with safety glass screen 1 6450.020 606
System accessories Page 355 Comfort Panel Page 116 Optipanel Page 118 TFT monitor Page 606
Material:
Enclosure, roof, drawer tray,
designer door, rear wall and
rear door: Sheet steel
Worktop:
Chipboard: Plastic-laminated
on both sides (edging)
Aluminium handle:
Powder-coated
Surface finish:
Enclosure: Dipcoat-primed,
powder-coated on the outside,
textured paint
Colour:
Enclosure, worktop:
RAL 7035
Worktop edge strip:
RAL 7015
Worktop handle:
RAL 9006
See table.
Supply includes:
Detailed drawing:
H
T B
H
T
B
Combination options
Monitor housing 21
Model No IW 6902.500
Optipanel
Custom-manufactured
for TFT monitors or other
display and input devices
Support arm
system
CP-L
Enclosure attachment
tilting
Model No. IW 6902.640
Roof
solid
Worktop
small, solid
Worktop
solid
Drawer section for
keyboard and mouse,
designer door, rear door
Height 900 mm
Worktop, keyboard
drawer, designer door,
rear door
Height 1000 mm
Designer door, rear door
Height 900 mm
Designer door, rear
panel screw-fastened
from the inside
Height 900 mm
Worktop
prepared for tilting
enclosure attachment
Model No IW 6902.310,
see page 148.
Pedestal
Drawer section, designer
door, rear door
Height 900 mm
Base/plinth, stationary
Model No. PC 8800.920
Twin castors
Model No. DK 7495.000
Twin castors
or CP 6148.000
IW enclosures and worktops
Enclosure Page
Design
Designer door,
rear panel
screw-fastened
from the inside
Designer door,
rear door
Drawer section,
designer door,
rear door
Drawer section
for keyboard
and mouse,
designer door,
rear door
Worktop,
keyboard drawer,
designer door,
rear door
Width (B) mm 600 600 600 600 600
Height (H) mm 900 900 900 900 1000
Depth (T) mm 600 600 600 (890) 600 (890) 645
Weight kg 54,9 59,9 73 73 91
Model No. IW 6900.000 6900.100 6900.400 6900.410 6901.100
Protection category
IP 55 to IEC 60 529,
IP 54 to IEC 60 529,
Width (B)
mm
Height (H)
mm
Depth (T)
mm
Weight
kg
Model No. IW
Worktops
610 38 645 11.6 6902.300 6902.300
1000 38 895 24 6902.100 6902.100 6902.100 6902.100
Roof
600 13 640 7.4 6902.400 6902.400
Monitor housing
600 600 600 42.5 6902.500 6902.500 6902.500 6902.500
Accessories Packs of
Base/plinth, stationary 1 8800.920 8800.920 8800.920 8800.920 8800.920 366
Cross member, adjustable 2 8601.680 8601.680 8601.680 8601.680 370
Twin castors 1 set 7495.000 7495.000 7495.000 7495.000 7495.000 374
Handle adaptor for comfort handle 1 8611.300 8611.300 402
Cable gland 1 6902.770 6902.770 6902.770 6902.770 6902.770 522
Mounting plate for enclosure width 600 mm 1 8614.675 8614.675 8614.675 8614.675 8614.680 448
Component shelf, static installation 1 8800.900 8800.900 8800.900 8800.900 8800.900 481
Component shelf, pull-out 1 6902.960 6902.960 6902.960 6902.960 6902.960 480
Drawer tray 1 6902.700 6902.700 6902.700 6902.700 6902.700 481
Adaptor section 482.6 mm (19) 1 8613.070 8613.070 8613.070 8613.070 551
Paper removal flap 1 6903.200 6903.200 6903.200 6903.200 6903.200 615
Enclosure attachment, tilting see page 143
Support arm systems see page 125
Operating housing see page 120
112
113
Comfort Panel
Benefits at a glance...................................................................................115
Comfort Panel ............................................................................................116
Comfort Panel, configuration examples ....................................................117
Optipanel
Benefits at a glance...................................................................................115
Optipanel ...................................................................................................118
Optipanel, configuration examples ...........................................................119
Operating housings
Compact Panel ..........................................................................................120
Command panel housing with door ..........................................................121
Operating housing with handle strips .......................................................122
Operating housing with display panel front ..............................................123
Support arm systems
Support arm systems, overview................................................................125
Support arm system CP-S, steel ...............................................................127
Support arm system CP-L .........................................................................131
Support arm system CP-C.........................................................................135
Support arm system CP-XL.......................................................................139
Support arm systems, accessories ...........................................................142
Stand systems
Pedestal, modular .....................................................................................147
Pedestal, complete....................................................................................148
Pillar, small ................................................................................................149
Pillar...........................................................................................................150
Accessories...............................................................................................151
Operating housings/support
arm systems/stand systems
114
115
Comfort Panel/Optipanel
Benefits at a glance
Aluminium enclosure, high thermal conductivity for optimum
passive heat dissipation
Low weight coupled with high stability
Protection category IP 65
Compatible with all Rittal stand and support arm systems
The choice is yours
Standard range
Standard variants offering outstanding value for money
and short delivery times
Easy, fast and reliable selection
For front panel installations, tailored to the most common
operating solutions
Comfort Panel, see page 116.
Optipanel, see page 118.
Configurable special solutions
Individual sizes, also for the direct installation of panels
with no front plate
Complete solution diversity for virtually all applications
Maximum flexibility in design and function
The command panel configurator determines the most suitable
enclosure for your application based on user-specific parameters.
More detailed information can be found at: www.rittal.com
Comfort Panel
For front panel width (B) mm
Packs
of
520 520 520 Page
For front panel height (H) mm 400 500 600
Installation depth mm 74 152 191 74 152 191 74 152 191
Model No. CP
4)
1 6372.541 6372.542 6372.543 6372.551 6372.552 6372.553 6372.561 6372.562 6372.563
Weight (kg) 7.8 11.7 13.8 8.8 12.3 15.2 9.7 13.5 16.7
Design
Support arm connection CP-L,
120 x 65 mm
1)

130 mm
1)

Hinged rear panel
with screw lock

Hinged rear panel with cam
2)

Screw-fastened rear panel
3)

Accessories
Front panel 1 6028.014 6028.014 6028.014 6028.015 6028.015 6028.015 6028.016 6028.016 6028.016 604
Handle set, horizontal 1 6375.000 6375.000 6375.000 6375.000 6375.000 6375.000 6375.000 6375.000 6375.000 600
Handle set, vertical 2 6375.040 6375.040 6375.040 6375.050 6375.050 6375.050 6375.060 6375.060 6375.060 600
Mounting bracket
4 6205.100 6205.100 6205.100 6205.100 6205.100 6205.100 6205.100 6205.100 6205.100 470
Spring nut M5 50 6108.000 6108.000 6108.000 6108.000 6108.000 6108.000 6108.000 6108.000 6108.000 478
Earthing plate 1 2570.500 2570.500 2570.500 2570.500 2570.500 2570.500 2570.500 2570.500 2570.500 502
1)
Top or bottom, by rotating the enclosure.
2)
With 3 mm double-bit lock insert, may be exchanged for 41 mm lock inserts, version C, see page 421, plastic handles and T handles, version C, see page 420.
3)
Enclosure hinged at the front with side double-bit lock insert, may be exchanged for 41 mm lock inserts, version C, see page 421,
plastic handles and T handles, version C, see page 420.
4)
Configuration examples, see page 117.
System accessories Page 355 Support arm systems Page 125 Stand systems Page 147 Industrial Workstations Page 110
Material:
Enclosure:
Extruded aluminium section
Corner pieces:
Die-cast zinc
Corner protectors:
Plastic
Colour:
Enclosure:
Natural-anodised
Corner pieces:
RAL 7035
Corner protectors:
Similar to RAL 7024
IP 65 to IEC 60 529
Supply includes:
Seals and assembly parts
for front panels.
Detailed drawings:
B
H
Comfort Panel
Configuration examples
Front panel height
mm
Cut-out dimensions
400
W (B) = 484 mm
H = 364 mm
= 18 mm all-round for attaching the adaptor plate
500
W (B) = 484 mm
H = 464 mm
600
W (B) = 484 mm
H = 564 mm
Free space, available for individual installed equipment such as rows of switches etc.
HE = U
1
B
H
7 HE
53.7
8 HE
1
1
B
H
153.7
7 HE
109.2
8 HE
65
9 HE
1
1
B
H
7 HE
253.7 209.2
8 HE
165
9 HE
7 HE
3.5 HE
98.7
8 HE
3.5 HE
54.2
9 HE
3.5 HE
1
Rittal Australia
RITTAL Pty. Ltd.
Miranda NSW 2228
Phone: +61 (2) 9525 2766
Fax: +61 (2) 9525 2888
Optipanel
To fit desktop TFT up to 20.1
with rear connection
VESA 75
VESA 100
Model No. CP 6380.050
System accessories Page 355 Support arm systems Page 125 Stand systems Page 147 Industrial Workstations Page 110
Material:
Enclosure:
Corner pieces:
Die-cast zinc
Corner protectors:
Plastic
Colour:
Enclosure:
Natural-anodised
Corner pieces:
RAL 7035
Corner protectors:
Similar to RAL 7024
IP 65 to IEC 60 529
Supply includes:
Seals and assembly parts
for front panels.
Detailed drawings:
H
B
For front panel width (B) mm Packs of 430 482.6 482.6 520 520 520 Page
For front panel height (H) mm 343 310.3 354.8 400 500 600
Installation depth mm 100 100 100 100 150 100 150 100 150
Model No. CP 1 6380.020
1)
6380.000 6380.040
1)
6380.400
2)
6380.410 6380.500
2)
6380.510
2)
6380.600
2)
6380.610
2)
Weight (kg) 5.3 6.2 6.6 5.8 7.3 6.6 8.3 7.3 9.2
Design
120 x 65 mm
3)

130 mm
3)

Hinged rear panel
4)

Accessories
Front panel 1 6028.010 6028.014 6028.014 6028.015 6028.015 6028.016 6028.016 604
Handle set, horizontal 1 6385.010 6385.010 6385.000 6385.000 6385.000 6385.000 6385.000 6385.000 600
Handle set, vertical 2 6385.040 6385.040 6385.050 6385.050 6385.060 6385.060 600
Mounting bracket
4 6205.100 6205.100 6205.100 6205.100 6205.100 6205.100 6205.100 6205.100 6205.100 470
Mounting bracket 4 4597.000 4597.000 4597.000 4597.000 4597.000 4597.000 4597.000 4597.000 4597.000 470
Earthing plate 1 2570.500 2570.500 2570.500 2570.500 2570.500 2570.500 2570.500 2570.500 2570.500 502
Spring nut M5 50 6108.000 6108.000 6108.000 6108.000 6108.000 6108.000 6108.000 6108.000 6108.000 478
1)
To fit TFT monitors, see page 606.
2)
Configuration examples, see page 119.
3)
Top or bottom, by rotating the enclosure.
4)
With 3 mm double-bit lock insert, may be exchanged for 41 mm lock inserts, version C, see page 421, plastic handles and T handles, version C, see page 420.
Optipanel
Configuration examples
Front panel height
mm
Cut-out dimensions
400
W (B) = 484 mm
H = 364 mm
500
W (B) = 484 mm
H = 464 mm
600
W (B) = 484 mm
H = 564 mm
Free space, available for individual installed equipment such as rows of switches etc.
HE = U
1
B
H
7 HE
53.7
8 HE
1
1
B
H
153.7
7 HE
109.2
8 HE
65
9 HE
1
1
B
H
7 HE
253.7 209.2
8 HE
165
9 HE
7 HE
3.5 HE
98.7
8 HE
3.5 HE
54.2
9 HE
3.5 HE
1
Rittal Belgium
RITTAL nv/sa
Industrieterrein E17/3206 Stokkelaar 8
B-9160 Lokeren
Phone: +32 (0) 9 353 9111
Fax: +32 (0) 9 355 6862
E-mail: [email protected] www.rittal.be
Compact Panel
System accessories Page 355 Support arm systems Page 125 Stand systems Page 147
For small operating units built
into front panels. The front panel
is inserted from the rear and
secured with screw clamps.
Special front panels with a
material thickness of between
2 and 6 mm are possible. Rear
panel optionally hinged on the
left or right.
Material:
Roof tray, base tray,
rear panel: Aluminium
Side parts:
Screw cover: Plastic
Surface finish:
Roof tray, base tray,
side parts: Powder-coated
Rear panel: Natural-anodised
Colour:
RAL 7024
IP 65 to IEC 60 529
Supply includes:
Roof tray
Base tray
Rear panel
Side parts
Screw cover
Seal and screw clamp
Detailed drawings:
Height mm 238 388 238 388
Depth mm 87 87 87 87
To fit
Front panel width mm 178 178 252 252
Front panel height mm 200 350 200 350
Model No. CP
(with support arm connection CP-S)
1 6340.000 6340.100 6340.300 6340.400
Weight (kg) 2.8 3.8 3.4 4.5
Accessories
Front panel, 3.0 mm aluminium, natural-anodised 1 6028.500 6028.510 6028.530 6028.540 604
Wall mounting bracket, vertically hinged 1 set 6341.000 6341.000 6341.000 6341.000 442
Cover plate for support arm connection CP-S 1 6505.200 6505.200 6505.200 6505.200 604
Spring nut M5 50 6108.000 6108.000 6108.000 6108.000 478
To order different heights for front panel width:
178 mm use Model No.: CP 6342.109
252 mm use Model No.: CP 6342.209
and additionally specify the front panel height. Extended delivery times.
Command panel housing with door
System accessories Page 355 Support arm systems Page 125 Stand systems Page 147 Command panel housing with door, stainless steel Page 167
Material:
Enclosure and door:
Sheet steel
Handle strips: Aluminium
Cover caps: Plastic
Surface finish:
Handle strips: Powder-coated
Colour:
Enclosure and door: RAL 7035
Handle strips and cover caps:
RAL 5018
IP 55 to IEC 60 529
Supply includes:
Enclosure with cut-out and
reinforcement for support arm
system CP-L, 130 mm
insert
Door with sealing frame
Side handle strips and cover
caps
Note:
The support arm connection and
door hinge may be swapped
over by rotating the enclosure.
Approvals:
UL
cUL
Detailed drawings:
T
H
B
Rittal Sweden
RITTAL Scandinavian ab
Rittalgatan 1 SE-262 73 ngelholm
Phone: +46 (431) 44 26 00
Fax: +46 (431) 44 26 44
E-mail: [email protected] www.rittal.se
Height (H) mm 200 300 400 300 400 500
Depth (T) mm 180 180 180 180 180 180
Model No. CP 1 6534.000 6535.000 6537.000 6536.000 6538.000 6544.000
Weight (kg) 5.5 7.1 8.4 8.4 10.6 14.5
Accessories
Matching mounting plate
AE type 1032.500 1033.500 1034.500 1030.500 1380.500 1050.500 44
Model No.
2)
0271.324 0271.926 0271.927 0274.131 0271.548 0271.333
Support rails
1)
Model No. 10 2316.000 2316.000 2316.000 2317.000 2317.000 2318.000 467
Alternative lock systems
With 3 mm double-bit lock insert, may be exchanged for 41 mm lock inserts, version C, see page 421,
1)
Only with vertical attachment of punched rail 23 x 23 mm, see page 463.
2)
Operating housing with handle strips
Material:
Enclosure and door:
Sheet steel
Handle strips: Aluminium
Cover caps: Plastic
Surface finish:
Handle strips: Powder-coated
Colour:
Enclosure and door: RAL 7035
Handle strips and cover caps:
RAL 7030
IP 55 to IEC 60 529
Supply includes:
Enclosure with cut-out and
reinforcement for support arm
system CP-L, 130 mm
Mounting angles spot welded
at the sides
Front with maximum cut-out,
covered with easily machina-
ble 3 mm aluminium front
panel
Side handle strips with cover
caps
Rear door with r/h hinge
Cam lock with double-bit insert
Note:
The support arm connection and
door hinge may be swapped
over by rotating the enclosure.
Approvals:
UL
cUL
Detailed drawings:
T
H
B
Rittal Spain
RITTAL Disprel S.A.
Mas Baiona, 40
Polgono Industrial Can Roqueta
08202 Sabadell (Barcelona)
Phone: +34 937 001 300
Fax: +34 937 001 301
E-mail: [email protected] www.rittal.es
Height (H) mm 200 300 380 500 380
Depth (T) mm 155 210 210 210 210
Model No. CP 1 6540.200
1)
6531.200 6530.200 6532.200 6533.200
Weight (kg) 4.9 9.3 10.2 15.4 14.6
Accessories
Support strips for attaching to the mounting
angles of the side panel
20 4594.000 4309.000 4594.000 426
Rail for interior installation 4 2373.210 2373.210 2373.210 2373.210 459
Mini comfort handle 1 2537.0X0 2537.0X0 2537.0X0 418
With 3 mm double-bit lock insert, may be exchanged for 27 mm lock inserts, version A, see page 421,
lock cylinder, plastic handles and T handles, version B, see page 420.
1)
Support arm connection and door hinge at the bottom.
Operating housing with display panel front
Material:
Enclosure and door:
Sheet steel
Frame and front panel:
Aluminium
Surface finish:
Enclosure and door:
textured paint
Frame and front panel:
Natural-anodised
Colour:
RAL 7035
IP 54 to IEC 60 529
Supply includes:
Enclosure without gland plate
Mounting angles spot welded
at the sides
With maximum cut-out at the
front and fitted, easily
machinable 3 mm front panel
with aluminium frame, with r/h
hinge, screw-fastened from
the inside.
Rear door with r/h hinge
insert
Approvals:
UL
cUL
Detailed drawings:
Rittal South Korea
RITTAL Co., Ltd.
Seoul Head Office
3rd Floor Asaan Venture Tower B/D
315-6 Yangjae-Dong
Seocho-Gu Seoul 137-896 Korea
Phone: +82 (0)2-577-6525
Fax: +82 (0)2-577-6526
E-mail: [email protected] www.rittal.co.kr
Height mm 380 600 500 600
Depth mm 249 249 249 249
Model No. CP 1 6442.500 6462.500 6552.500 6662.500
Weight (kg) 9.5 13.4 18.0 19.6
Cam lock 1 2 2 2
Accessories
Enclosure reinforcement
with support arm cut-out CP-L
1 6143.210 6143.210 6143.210 151
with support arm cut-out CP-XL
1 6503.000 151
Rail for interior installation 4 2373.210 2373.210 2373.210 2373.210 459
Mini comfort handle 1 2537.0X0 2537.0X0 2537.0X0 2537.0X0 418
With 3 mm double-bit lock insert, may be exchanged for 27 mm lock inserts, version A, see page 421,
lock cylinder, plastic handles and T handles, version B, see page 420.
124
125
Support arm systems
Support arm system CP-S
Overview of components...........................................................................127
Support section CP-S................................................................................128
Support arm system CP-S, components ...................................................129
Support arm system CP-L
Support section CP-L ................................................................................132
Support arm system CP-L, components ...................................................133
Support arm system CP-C
Support section CP-C................................................................................136
Support arm system CP-C, components...................................................137
Support arm system CP-XL
Support section CP-XL..............................................................................140
Support arm system CP-XL, components .................................................141
Support arm configurator
The support arm configurator determines the correct support arm system
according to user-specific parameters.
More detailed information can be found at: www.rittal.com
800
1000
1200
1400
1600
600
400
200
0
500 0 1000 1500 2000 2500 3000
CP-XL
CP-C
CP-L
CP-S
P
e
r
m
i
s
s
i
b
l
e

s
t
a
t
i
c

l
o
a
d

[
N
]

(
e
n
c
l
o
s
u
r
e

a
n
d

v
e
r
t
i
c
a
l

s
u
p
p
o
r
t

a
r
m

s
e
c
t
i
o
n
)
Jib length (mm)
Load information
Comparison of support arm systems
126
1
2
3
4
5
6
8
9
10
127
Support arm system CP-S, steel
Overview of components
Enclosure attachment CP-S
(CP 6501.070)
Housing coupling, round CP-S
(CP 6501.050)
Housing coupling, CP-S for support arm connection
CP-L 120 x 65 mm
(CP 6501.130)
Angle coupling 90 CP-S
(CP 6501.120)
Support section CP-S
(CP 6501.000, .020)
Angle piece 90 CP-S
(CP 6501.140)
Top-mounted joint CP-S
(CP 6501.160)
Wall-mounted hinge CP-S
(CP 6501.150)
Wall/base mounting bracket CP-S
(CP 6501.110)
Mounting components for signal pillar
(CP 2375.030)
1
2
3
4
5
6
7
8
9
10
400
600
800
200
0
0 500 1000 1500
P
e
r
m
i
s
s
i
b
l
e

s
t
a
t
i
c

l
o
a
d

[
N
]

(
e
n
c
l
o
s
u
r
e

a
n
d

v
e
r
t
i
c
a
l

s
u
p
p
o
r
t

a
r
m

s
e
c
t
i
o
n
)
Jib length (mm)
Load information
When using CP-S in conjunction with CP-L
(in the horizontal development of the system),
the CP-L load diagram applies.
7
4
1
3
2
5
8
1
6
7
5
9
10
12
11
13
Comfort Panel Page 116 Optipanel Page 118 Compact Panel Page 120 Command panel housing with door Page 121 Operating housings Page 122
Attached to the connection com-
ponents via 2 clamping screws.
Size:
External diameter: 48.3 mm
Wall thickness: 4.0 mm
Material:
Steel conduit, powder-coated
Colour:
RAL 7035
Supply includes:
Note:
Stainless steel, see page 168.
Detailed drawings:
Integral adjustment facility Combination with support arm system
CP-L
Also available in stainless steel version,
see page 168
Support section CP-S, 1000 mm (CP 6501.020)
Support section CP-S, 500 mm (CP 6501.000)
Wall-mounted hinge CP-S (CP 6501.150)
Angle piece 90 CP-S (CP 6501.140)
Housing coupling CP-S (CP 6501.050)
Wall-mounted hinge CP-L (CP 6521.010)
Support section CP-L, 500 mm (CP 6511.000)
Angle adaptor CP-L to CP-S 90 (CP 6501.090)
Wall/base mounting, rigid, CP-S, stainless steel (CP 6663.000)
Support section CP-S, stainless steel, 1000 mm (CP 6660.010)
Angle piece 90, CP-S, stainless steel (CP 6664.300)
Support section CP-S, stainless steel, 500 mm (CP 6660.050)
Housing coupling CP-S, stainless steel (CP 6664.000)
1
2
3
4
5
6
7
8
9
10
11
12
13
R
o
t
a
t
i
n
g
/
t
i
l
t
i
n
g
R
i
g
i
d
L
e
n
g
t
h

m
m
W
e
i
g
h
t

k
g
C
o
l
o
u
r

R
A
L
Enclosure section Desk section Wall section
Model No. CP
Enclosure attachment, tilting
see page 145 0.8 7024 6902.670
Enclosure attachment CP-S
1.0 7024 6501.070
Housing coupling, round CP-S
1.1 7024 6501.050
Housing coupling CP-S
for support arm connection CP-L
120 x 65 mm
1.5 7024 6501.130
Angle coupling 90 CP-S
1.6 7024 6501.120

500
1000
2.1
4.2
7035
7035
6501.000
6501.020
Angle piece 90 CP-S
1.1 7024 6501.140 6501.140
Mounting component for signal pillar
see page 623 0.3 7024 2375.030
Top-mounted joint CP-S
1.8 7024 6501.160
Wall-mounted hinge CP-S
2.2 7024 6501.150
Wall/base mounting bracket CP-S
0.7 7024 6501.110
Accessories CP-S
Angle adaptor 90 CP-L to CP-S CP 6501.090 see page 146
130
2
1
3
4
5
6
7
8
9
10
11
12
13
14
15
17
18
20
131
Tilting adaptor 10 CP-L, for support arm connection 130 mm
(CP 6527.010)
Tilting adaptor 10 CP-L, for support arm connection
CP-L 120 x 65 mm (CP 6527.110)
Tilting adaptor 45 CP-L, for support arm connection 130 mm
(CP 6529.010)
Connection console CP-L (CP 6508.010)
Enclosure attachment CP-L, for support arm connection 130 mm
(CP 6525.510)
Enclosure attachment CP-L, for support arm connection
CP-L 120 x 65 mm (CP 6525.610)
Enclosure attachment, locatable CP-L, for support arm connection
CP-L 120 x 65 mm (CP 6525.210)
Housing coupling CP-L, for support arm connection 130 mm
(CP 6525.010)
Housing coupling CP-L, for support arm connection
CP-L 120 x 65 mm (CP 6525.110)
Angle coupling 90 CP-L, for support arm connection 130 mm
(CP 6526.010)
Support section CP-L, closed
(CP 6509.000, CP 6511.000, CP 6513.000, CP 6515.000)
Support section CP-L, open (CP 6513.050)
Angle piece 90 CP-L (CP 6524.010)
Articulated joint 90 CP-L, may only be top-mounted/suspended
on the enclosure side (CP 6524.210)
Intermediate hinge CP-L (CP 6523.010)
Top-mounted joint CP-L (CP 6522.010)
Wall/base mounting bracket, small CP-L (CP 6520.510)
Wall/base mounting bracket, large CP-L (CP 6520.010)
Mounting components for signal pillar (CP 2375.000, .020)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
800
600
400
200
0
500 0 1000 1500 2000
1
2
3
P
e
r
m
i
s
s
i
b
l
e

s
t
a
t
i
c

l
o
a
d

[
N
]

(
e
n
c
l
o
s
u
r
e

a
n
d

v
e
r
t
i
c
a
l

s
u
p
p
o
r
t

a
r
m

s
e
c
t
i
o
n
)
Jib length (mm)
Load information
Permissible load depending on system configuration
System configuration without intermediate hinge
System configuration with one intermediate hinge
System configuration with one intermediate hinge
and one top-mounted/wall-mounted joint
Note:
Intermediate hinge CP 6523.010 should only be used once per system!
When using the open support section, the load information is 70% of the
closed support section.
1
2
3
19
16
Support section CP-L
Attachment to the connection
components with 4 self-tapping
screws in the screw channel,
may be cut to any required
length, no thread-tapping
required.
Size:
External dimensions:
50 x 85 mm
Wall thickness: 8 mm
Material:
Support section:
Cover: Plastic
Colour:
Support section: RAL 7035
Supply includes:
Detailed drawings:
50
8
5
21
50
8
5
Adjustment range up to 800 mm
Integral stay in three stages, except for CP 6510.210
Problem-free cable entry with connectors such as DVI, VGA, except with CP 6510.210
Support arm, height-adjustable, see page 144
Combination with support arm, height adjustable
Combination with support arm systems
CP-C to CP-L
CP-C to CP-S
Wall/base mounting bracket CP-C,
large (CP 6072.000)
Support section CP-C, 500 mm
(CP 6074.100)
Intermediate hinge CP-C (CP 6071.800)
Adaptor CP-C to CP-L (CP 6071.600)
Support section CP-L (CP 6511.000)
Angle piece 90 CP-L (CP 6524.010)
Support section CP-L, 500 mm
(CP 6511.000)
Housing coupling CP-L (CP 6525.010)
Angle adaptor 90 (CP 6501.090)
Support section CP-S, steel, 500 mm
(CP 6501.000)
Housing coupling CP-S (CP 6501.050)
1
2
3
4
5
6
7
8
9
10
11
12
1
2
3
4 5
6
7
8
9
5 10
11
12
R
o
t
a
t
i
n
g
/
t
i
l
t
i
n
g
R
i
g
i
d
L
e
n
g
t
h

m
m
W
e
i
g
h
t

k
g
C
o
l
o
u
r

R
A
L
Model No. CP
Tilting adaptor 10 CP-L
for support arm connection 130 mm 0.6 7024 6527.010
for support arm connection CP-L 120 x 65 mm 0.4 7024 6527.110
Tilting adaptor 45 CP-L
Connection console CP-L
for flat operating housings 0.7 7024 6508.010
Enclosure attachment CP-L
Enclosure attachment, locatable CP-L
Housing coupling CP-L
Angle coupling 90 CP-L
Closed

250
500
1000
2000
1.3
2.6
5.1
10.2
7035
7035
7035
7035
6509.000
6511.000
6513.000
6515.000
6509.000
6511.000
6513.000
6515.000
6509.000
6511.000
6513.000
6515.000
Open 1000 4.75 7035 6513.050 6513.050 6513.050
Angle piece 90 CP-L
1.4 7024 6524.010 6524.010
Articulated joint 90 CP-L
1.2 7024 6524.210
Intermediate hinge CP-L
3.2 7024 6523.010
Wall/base mounting, large CP-L
1.9 7024 6520.010
see page 623

0.4
9017
9017
2375.000

2375.020

2375.020
Top-mounted joint CP-L
3.0 7024 6522.010
Wall-mounted hinge CP-L
3.2 7024 6521.010
Wall/base mounting bracket, small, CP-L
0.6 7024 6520.510
Accessories CP-L:
Adaptation options see page 142
Support arm bracket CP 6519.000 see page 145
Connection plate CP 6528.210 see page 143
134
1
2
3
6
14
4
7
9
5
4
5
11
12
13
4
135
Enclosure attachment CP-C, for support arm connection
CP-L 130 mm (CP 6070.200)
Enclosure attachment CP-C, for support arm connection
CP-L 130 mm (CP 6070.000)
Angle coupling 90 CP-C, for support arm connection
CP-L 130 mm (CP 6071.200)
Support section CP-C, closed (CP 6074.000, .100, .300, .500)
Support section CP-C, open (CP 6075.100, .300, .500)
Angle piece 90 CP-C (CP 6071.400)
Intermediate hinge CP-C (CP 6071.800)
Top-mounted joint CP-C, vertical outlet (CP 6072.800)
Top-mounted joint CP-C, horizontal outlet (CP 6072.600)
Wall-mounted joint CP-C, vertical outlet (CP 6072.400)
Wall-mounted joint CP-C, horizontal outlet (CP 6072.500)
Wall/base mounting bracket, small CP-C (CP 6072.200)
Wall/base mounting bracket, large CP-C (CP 6072.000)
Mounting components for signal pillar (CP 6073.000)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
10
8
4
6
800
1000
1200
600
400
200
0
500 0 1000 1500 2000 2500
1
2
3
B
A
P
e
r
m
i
s
s
i
b
l
e

s
t
a
t
i
c

l
o
a
d

[
N
]

(
e
n
c
l
o
s
u
r
e

a
n
d

v
e
r
t
i
c
a
l

s
u
p
p
o
r
t

a
r
m

s
e
c
t
i
o
n
)
Jib length (mm)
Load information
Without intermediate hinge
With intermediate hinge CP 6071.800 and closed support section
With intermediate hinge CP 6071.800 and open support section
Maximum system length 2500 mm for systems with horizontal outlet
at the system start.
Maximum system length 1500 mm for systems with vertical outlet
at the system start.
Note:
Wall/base mounting bracket, small CP 6072.200 must not be used in
conjunction with intermediate hinge CP 6071.800!
1
2
3
A
B
Support section CP-C
screws in the screw channel. May
be cut to any required length, no
thread-tapping required.
Closed cable duct with a large
cross-section.
Open cable duct for easy servic-
ing access and for pre-assemb-
led cables with connectors; lock-
able via cover section. X-shaped
profile for higher load capacity,
large cable routing channels.
Upper channel adequate for
cables with large connectors
(e.g. DVI or VGA) and available/
usable throughout the entire
system.
Size:
75 x 120 mm
Wall thickness: 6.5 mm
Material:
Support section:
Cover: Plastic
Colour:
Support section: RAL 7035
Cover: RAL 7024
Supply includes:
Clip-in lid (only for CP-C
open)
Detailed drawings:
1
2
0
75
Function
Easily adjusted without dismantling the system
Fast, simple assembly of the system
Rotation range may be limited without dismantling the system
Cable management
Cross-section sufficient for large connectors
Separation between data and power cables
Removable cover for simple cable entry
Flexible cable entry and routing options
R
o
t
a
t
i
n
g
/
t
i
l
t
i
n
g
R
i
g
i
d
L
e
n
g
t
h

m
m
W
e
i
g
h
t

k
g
C
o
l
o
u
r

R
A
L
Model No. CP
Enclosure attachment CP-C for support arm connection CP-L 130 mm
0.7 7035 6070.200
Housing coupling CP-C for support arm connection CP-L 130 mm
2.0 7035 6070.000
Angle coupling 90 CP-C, for support arm connection CP-L 130 mm
2.1
7035/
7024
6071.200
Closed

250
500
1000
2000
2.0
3.9
7.8
15.6
7035
6074.000
6074.100
6074.300
6074.500
6074.000
6074.100
6074.300
6074.500
6074.000
6074.100
6074.300
6074.500
Open

500
1000
2000
4.6
9.2
18.4
7035/
7024
6075.100
6075.300
6075.500
6075.100
6075.300
6075.500
6075.100
6075.300
6075.500
Angle piece 90 CP-C
1.1
7035/
7024
6071.400 6071.400
Intermediate hinge CP-C
4.4
7035/
7024
6071.800
Top-mounted joint CP-C
Vertical outlet 3.8 7035 6072.800
Horizontal outlet 4.3
7035/
7024
6072.600
Wall-mounted hinge CP-C
Vertical outlet 5.5
7035/
7024
6072.400
Horizontal outlet 6.1
7035/
7024
6072.500
Wall/base mounting bracket, small, CP-C
0.5 7035 6072.200
Wall/base mounting bracket, large, CP-C
2.5
7035/
7024
6072.000
See page 623 0.1 7024 6073.000 6073.000 6073.000
Accessories CP-C:
Adaptor CP-C to CP-L CP 6071.600 see page 143
Connection adaptor CP-L 130 mm to CP-L 120 x 65 mm CP 6071.000 see page 142
Support arm, height adjustable see page 144
138
7
10
8
12
14
15
5
8
4
9
6
11
1
139
Connection adaptor CP-L to CP-XL, 20 mm height
(CP 6528.010)
Connection adaptor CP-L to CP-XL, 55 mm height
(CP 6528.510)
Tilting adaptor 10 CP-XL
(CP 6023.010)
Enclosure attachment, round CP-XL
(CP 6130.610)
Enclosure attachment, square CP-XL
(CP 6130.510)
Housing coupling CP-XL
(CP 6130.010)
Angle coupling 90 CP-XL
(CP 6140.010)
Support section CP-XL, closed
(CP 6050.500, 6100.500, 6200.500)
Support section CP-XL, open
(CP 6050.000, 6100.000, 6200.000)
Angle piece 90 CP-XL, outlet at bottom
(CP 6140.010)
Angle piece 90 CP-XL, outlet at top
(CP 6180.010)
Intermediate hinge CP-XL
(CP 6120.010)
Top-mounted joint CP-XL
(CP 6170.010)
Wall-mounted hinge CP-XL
(CP 6110.010)
Wall/base mounting bracket CP-XL
(CP 6160.010)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
8
3
2
13
9
Load information
800
1000
1200
1400
1600
600
400
200
0
500 0 1000 1500 2000 2500 3000
1
3
+ 2
P
e
r
m
i
s
s
i
b
l
e

s
t
a
t
i
c

l
o
a
d

[
N
]

(
e
n
c
l
o
s
u
r
e

a
n
d

v
e
r
t
i
c
a
l

s
u
p
p
o
r
t

a
r
m

s
e
c
t
i
o
n
)
Jib length (mm)
Open and solid support section without intermediate hinge
Solid support section with one intermediate hinge
Open support section with one intermediate hinge
Note:
1
2
3
2
1
3
4
5
Support section CP-XL
screws in a screw channel, may
be cut to any required length.
Closed cable duct for higher
loads and torsion.
Open cable duct for easy servic-
ing access and for pre-assem-
bled cables with connectors;
lockable via clip-in cover.
Size:
80 x 155 mm
Material:
Colour:
RAL 7035
Supply includes:
Clip-in cover
(only for CP-XL open)
Detailed drawings:
1
5
5
80
Wall-mounted hinge CP-XL (CP 6110.010)
Support section CP-XL (CP 6100.000)
Angle adaptor 90 CP-XL to CP-L
(CP 6528.110)
Support section CP-L (CP 6511.000)
Housing coupling CP-L for support arm
connection CP-L 130 mm (CP 6525.010)
1
2
3
4
5
CP-XL to CP-L
Cable management
Open support section for retrospective cable insertion
Separation of control cables from power supply
with two separate ducts
R
o
t
a
t
i
n
g
/
t
i
l
t
i
n
g
R
i
g
i
d
L
e
n
g
t
h

m
m
W
e
i
g
h
t

k
g
C
o
l
o
u
r

R
A
L
Model No. CP
Connection adaptor CP-L to CP-XL
Height 20 mm 0.6 7024 6528.010
Height 55 mm 0.7 7024 6528.510
Tilting adaptor 10 CP-XL
1.4 7024 6023.010
Enclosure attachment, round CP-XL
1.2 7024 6130.610
Enclosure attachment, rectangular CP-XL
1.2 7024 6130.510
Housing coupling CP-XL
3.6 7024 6130.010
Angle coupling 90 CP-XL
2.1 7024 6040.010
Closed

500
1000
2000
5.5
11.0
22.0
7035
7035
7035
6050.500
6100.500
6200.500
6050.500
6100.500
6200.500
6050.500
6100.500
6200.500
Open

500
1000
2000
4.9
9.8
19.6
7035
7035
7035
6050.000
6100.000
6200.000
6050.000
6100.000
6200.000
6050.000
6100.000
6200.000
Angle piece 90 CP-XL
Outlet at bottom 2.4 7024 6140.010 6140.010
Outlet at top 3.6 7024 6180.010 6180.010
Intermediate hinge CP-XL
6.5 7024 6120.010
Top-mounted joint CP-XL
11.9 7024 6170.010
Wall-mounted hinge CP-XL
8.5 7024 6110.010
Wall/base mounting bracket CP-XL
4.1 7024 6160.010
Rotation range restrictor
for:
Intermediate hinge CP 6120.010
Wall-mounted hinge CP 6110.010
0.6 6110.100 6110.100
Support arm systems
Accessories
Connection adaptor
CP-L 130 mm to
CP-L 120 x 65 mm
For external mounting of command panels with
support arm cut-out CP-L 120 x 65 mm.
Material:
Cast aluminium
Supply includes:
Seal and assembly parts.
Detailed drawings:
Height
mm
Colour
RAL
Weight
kg
Model No. CP
40 7035 0.5 6071.000
Connection adaptor CP-L
to CP-XL
For mounting between enclosures with support
arm connection CP-L and support arm system
CP-XL.
May also be used for the attachment of command
panels with cut-out for CP-L directly to machines
and systems without a support arm. The mount-
ing cut-out CP-XL should be provided there.
Assembly sequence:
Mount the connection adaptor on the support-
ing structure
Mount the enclosure and tighten the screws
Material:
Cast aluminium
Supply includes:
Detailed drawings:
Height
mm
Colour
RAL
Weight
kg
Model No.
CP
20
1)
7024 0.6 6528.010
55 7024 0.7 6528.510
1)
If the load permits, also suitable for mounting between
enclosure with support arm connection CP-XL and
support arm system CP-L 130 mm.
Adaptor
for Siemens Pro-Panel
For external mounting of Siemens Simatic
Pro-Panel on
Support arm system CP-L 120 x 65 mm
Material:
Aluminium
Supply includes:
Assembly parts.
Colour
RAL
Model No. CP
7024 6528.450
for Beckhoff Control-Panels
Removable cover for easy cable entry with
a large opening (110 x 50 mm)
For external mounting of Beckhoff
Control-Panels on
Support arm system CP-L 120 x 65 mm
Material:
Cast aluminium
Supply includes:
Seals and assembly parts for mounting on the
enclosure and 2 cable ties.
Detailed drawings:
Colour
RAL
Weight
kg
Model No. CP
7024 0.7 6508.020
Accessories
Support arm systems
Connection plate CP-L
With reinforcement plate
For easy location of the command panel onto
the support arm or pedestal.
More space for cable entry
For mounting command panels
Comfort Panel from a front panel width of
247 mm and installation depth of 152 mm
Optipanel from a front panel width of 220 mm
and installation depth of 150 mm
Sheet steel from 135 mm installation depth
Material:
Connection plate: Cast aluminium
Reinforcement plate: Sheet steel, 6 mm
Supply includes:
Seals and assembly parts.
Detailed drawings:
Colour
RAL
Weight
kg
Model No.
CP
7024 0.7 6528.210
Enclosure attachment, tilting,
base mounting
CP-L 120 x 65 mm
For mounting beneath:
IW worktop with pedestal
Adequately large surfaces
Fits enclosures with mounting cut-out:
CP-L 120 x 65 mm
(e.g. Optipanel, see page 118,
Comfort Panel, see page 116)
With mounting cut-out for connector grommet
for sealed cable entry.
Tilt angle:
+/40, lockable via clamping levers.
Material:
Sheet steel
Surface finish:
Spray-finished
Supply includes:
Assembly parts.
Note:
The enclosure attachment can be mounted either
on the support arm connection of the Optipanel
enclosure or on the underside or rear of any
enclosure.
Accessories:
Connector gland, see page 522
IW worktop, see page 111
Pedestal, see page 147.
Detailed drawings:
Colour
RAL
Weight
kg
Model No.
IW
7024 1.6 6902.640
Connection adaptor
CP-C to CP-L
Applications: For integration of the support arm,
height-adjustable CP-L (see page 132) to the
CP-C support arm system
For mounting small, flat operating housings if
the load capacity of the support arm system
CP-C is needed for long jib lengths
Benefits:
Integral adjustment facility
Material:
Cast aluminium
Supply includes:
Seals
Self-tapping screws for CP-L support section
attachment.
Detailed drawings:
Weight
kg
Model No. CP
0.6 6071.600
Adjustment set for support
section CP-XL
The adjustment set also supports retrospective
alignment of the CP support section.
Material:
Sheet steel 1.0 mm
Surface finish:
Zinc-plated
Packs of Model No. CP
10 6205.000
Support arm systems
Accessories
Housing couplings CP-XL
for desktop mounting
The stable, rotating connection with extra space
for cable routing.
For additional stability of the roof and base with
heavy installed equipment.
For mounting
Command panels from 150 mm installation
depth on
IW worktops
Horizontal surfaces (floors or ceilings)
Attachment
of command panels: With one-man assembly
via machined keyholes
on surfaces: Via external screws with cover
Rotation range:
Max. 350, lockable via clamping levers.
By using additional M6 cheese-head screws,
the rotation range may be limited to 28, 73,
118, 163.
Material:
Housing coupling: Cast aluminium/die-cast zinc
Reinforcement plate: Sheet steel, 6 mm
Surface finish:
Housing coupling: Powder-coated, textured
Reinforcement plate: Zinc-plated
Colour:
Housing coupling: RAL 7024
Supply includes:
Reinforcement plate
Seals
Assembly parts
Note:
With the Comfort Panel and Optipanel enclo-
sures, the rectangular support arm cut-out can be
selected, ordered and prepared using the com-
mand panel configurators at www.rittal.com.
Detailed drawings:
Design Optipanel
Comfort
Panel
Weight
kg
Model No.
CP
W =
418 mm
432
1)
435
1)
4,2 6528.410
1)
From front panel width mm without keyboard housing;
with keyboard housing on request.
Support arm, height adjustable
for support arm system CP-L
Offers enhanced ergonomics thanks to:
Adjustment range
for tall and short operators
for seated and standing work
adjustable to a maximum of 800 mm as
required via an adjusting screw at the front of
the support arm.
Precise coordination of the compression spring
to the enclosure weight via an adjusting screw
at the rear of the support arm.
Complete functional reliabilty if the compres-
sion spring breaks, the arm will remain in posi-
tion.
Clip-off plastic panels for access to integral
cable routing.
Tilting angle of the mounted enclosure is identi-
cal in every height position.
For 6510.330 and 6510.340:
More space for cable routing.
Cables with connectors such as DVI,
VGA are also easily inserted.
Integral locking in three stages.
Superior load capacity.
Supply includes:
Assembly parts.
Note:
Maximum cross-section for cable entry:
6510.210 = 8 x 15 mm
6510.330/.340 = 16 x 40 mm
Detailed drawings:
Overall
length
mm
Colour
RAL
Weight
range
kg
1)

Model No.
CP
962 9006 10 20 6510.210
1090 9006 15 32 6510.330
1090 9006 20 40 6510.340
1)
For populated enclosure and vertical support section.
Accessories
Support arm systems
Pivot CP-L
with/without jib
For direct, vertically hinged integration into
machines and systems
Enclosure suspended or top-mounted
With integral rotation range restrictor
To fit enclosures with mounting cut-out
CP-L 130 mm
Detailed drawings:
Jib length
mm
Colour
RAL
Load
capacity N
Model No.
CP
7024 700 6016.700
200 7024/7035 700 6016.600
Support arm bracket 90 CP-L
For the configuration of compact systems
To fit support arm system CP-L
No thread-tapping required
Detailed drawings:
Colour
RAL
Weight
kg
Model No.
CP
7035 3.4 6519.000
Enclosure attachment, tilting,
top mounting
For mounting on:
IW worktop, prepared for enclosure attachment
CP-L, 130 mm, see page 111
Surfaces
Enclosure attachment/coupling
CP-L 120 x 65 mm, see page 133
Attachment/housing coupling CP-S

(may also
be used as tilting adaptor +100/60 for CP-S),
see page 129
To fit enclosures up to 20 kg with support arm
connection:
CP-S
CP-L 120 x 65 mm
CP-L 130 mm
VESA Standard 75.
With cable tube for protected cable entry.
Tilt angle:
+100/60, adjustable in 7.2 increments via
clamping lever and may be limited to +100/15
using the stop screw supplied loose.
Material:
Sheet steel
Surface finish:
Spray-finished
Supply includes:
Assembly parts
Plastic concertina section
Accessories:
IW worktops prepared for enclosure attachment,
see page 111.
Detailed drawings:
Colour RAL Weight kg Model No. IW
7024 0.8 6902.670
Support arm systems
Accessories
Angle adaptor 90
Connection component between:
small and larger support arm systems.
Outlet optionally at the top or bottom if this config-
uration is chosen for static or visual reasons. The
removable cover ensures easier cable entry.
Material:
Cast aluminium
Supply includes:
Seal for support section attachment.
Detailed drawings:
Colour
RAL
Weight
kg
Model No.
CP
CP-L to CP-S 7024 1.0 6501.090
CP-XL to CP-L 7024 1.7 6528.110
Stand systems
Pedestal, modular, consisting of:
Pedestal base plate
Support section
Enclosure connection
Colour:
RAL 7035
Detailed drawings:
Pedestal, modular
Weight load kg 15 18 35 50 Page
Pedestal base plate Model No. CP
Pedestal base plate 6146.100 6143.200 6137.535 6137.035
Dimensions W x H x D mm 400 x 10 x 400 400 x 108 x 400 490 x 100 x 600
Support section Model No. CP
Height-adjustable (adjustment range 732 1122 mm) 6146.200
Closed, length 1000 mm 6513.000 6513.000 6100.500 133/141
Open, length 1000 mm 6513.050 6513.050 6100.000 133/141
Enclosure connection Model No. CP
Enclosure reinforcement, rigid 6143.210 151
Enclosure attachment CP-S 6501.070 129
Housing coupling CP-S 6501.050 129
Enclosure attachment CP-L, 130 mm 6525.510 133
Enclosure attachment CP-L, 120 x 65 mm 6525.610 133
Housing coupling CP-L, 130 mm 6525.010 133
Housing coupling CP-L, 120 x 65 mm 6525.110 133
Enclosure attachment CP-XL, round 6130.610 141
Enclosure attachment CP-XL, rectangular 6130.510 141
Housing coupling CP-XL 6130.010 141
Tilt adjustment 6146.300
Accessories
Twin castors 6148.000 6148.000 6148.000 374
Levelling feet 4612.000 4612.000 373
Base mount 1590.000 1590.000 439
Gas pressurised spring, load capacity 15 kg 6146.400
3
2
1
1
2
3
Stand systems
The right system to suit any
application:
Fixed or mobile variant
Different designs
Weight load from 15 50 kg
Reliable protection of cable
management
Colour:
RAL 7035
Detailed drawings:
Pedestal, complete
Weight load kg 25 25 35 50 50 Page
Model No. CP 6141.100 6141.200 6136.500 6136.000 6135.000
Dimensions W x H x D mm 600 x 1093 x 660 600 x 946 x 660 600 x 1005 x 550 360 x 995 x 500
Supply includes
Cross member
Base plate
Twin castors
Support section
Vertical aluminium moulding, may be opened
Worktop attachment
Accessories
Twin castors
6148.000,
7495.000
6148.000,
7495.000
374
Levelling feet 4612.000 4612.000 373
Base mount 6147.000 6147.000 151
Trim panel for pedestal 6144.100 6144.100 151
Enclosure attachment CP-L, 130 mm 6525.510 6525.510 133
Enclosure attachment CP-L, 120 x 65 mm 6525.610 6525.610 133
Housing coupling CP-L, 130 mm 6525.010 133
Housing coupling CP-L, 120 x 65 mm 6525.110 133
Enclosure attachment CP-L, 120 x 65 mm, locatable 6525.210 133
Enclosure attachment, tilting 6902.640 143
Worktop without handle
1)
6902.310
1)
W x H x D 950 x 38 x 600 mm
Stand systems
The welded alternatives to the
pedestal, complete
Pedestal, open:
For retrospective cable entry
with pre-assembled connec-
tors
Pillar, small:
For heavy installed equipment
Material:
Steel
Surface finish:
Spray-finished
Colour:
RAL 7035
Detailed drawings:
Pillar, small
Weight load kg 40 80 Page
Model No. CP 6215.000 6214.500
Design
Base plate cross-section W x H x D mm 400 x 10 x 400 500 x 12 x 500
Pedestal tube cross-section W x H mm 86 x 73 160 x 80
Pedestal tube wall thickness mm 3 3,2
Overall height mm 1093 1150
Accessories
Enclosure attachment CP-L, 130 mm 6525.510 133
Housing coupling CP-L, 130 mm 6525.010
1)
133
Housing coupling CP-XL 6130.010 141
1)
When assembling enclosures with support arm connection CP-L, 120 x 65 mm, connection adaptor CP-L, 130 mm to CP-L, 120 x 65 mm CP 6071.000
(see page 142) should additionally be used.
Stand systems
Support arm system CP-S Page 127 Support arm system CP-L Page 131 Support arm system CP-C Page 135 Support arm system CP-XL Page 139
The stable base point for the
support arm system. The attach-
ment of additional enclosures,
e.g. for security systems, is also
possible.
There is a choice of 2 cross-sec-
tions:
140 x 140 mm
200 x 200 mm
Design:
Base plate, thickness:
15 mm, with 4 mounting holes
Cut-out in the base plate in
accordance with the cross-
section for cable entry from
below
Pedestal tube (wall thickness
5 mm) welded to the base
plate
Connection facility for
support arm systems as
per the selection table.
Delivery time:
Available on request.
Material:
Steel
Surface finish:
Spray-finished
Colour:
RAL 7035
Supply includes:
Assembly parts for support arm
system according to selection.
Note:
Customer-specific designs,
such as:
Other RAL colours
Heights
Consoles for additional
enclosures
available on request.
Accessories:
Support arm system
CP-S, see 128
CP-L, see page 132
CP-C, see page 136
CP-XL, see page 140
Gland plates size 2,
see from page 514.
Detailed drawings:
Pillar
In addition to the Model Number, the following information is also needed:
1. Unless otherwise stated, the position for the cable entry cut-out is on the rear.
2. Position and Item No. of support arm component
Design For support arm system Model No. CP
Cross-section 140 x 140 mm, height 2000 mm
1)
CP-S, CP-L, CP-C 6214.000
Cross-section 200 x 200 mm, height 2000 mm
1)
CP-C, CP-XL 6220.000
1)
Unless otherwise specified.
Support arm component
Support arm system
CP-S CP-L CP-C CP-XL
Wall/base mounting bracket, large, side mounting 6501.110 6520.010 6072.000 6160.010
Wall-mounted hinge, horizontal outlet, side mounting 6501.150 6521.010 6072.500 6110.010
Top-mounted joint, mounting on top 6501.160 6522.010 6072.600, 6072.800 6170.010
Accessories
Stand systems
Base mount
Brackets for screw-fastening from below to the
cast feet with posidrive raised countersunk
screws M12. Optionally with projection at the front,
interior or sides, with 11 mm hole for screw-
fastening to the base.
Material:
Steel
Surface finish:
Zinc-plated
Supply includes:
Posidrive raised countersunk screws M12.
4 6147.000
Trim panel
Material:
Cast aluminium
Supply includes:
Assembly parts for screw-fastening between the
cast feet at the front or rear.
Colour RAL Model No. CP
7035 textured 6144.100
1
2
3
For external or internal reinforcement of enclo-
sures of a corresponding size.
Smaller enclosures may also be mounted directly
without enclosure reinforcement.
Supply includes:
Assembly parts for the enclosure and support
section plus 2 seals.
Detailed drawings:
B = Width
T = Depth
For enclosure
Support arm
connection
Material Weight kg
Model No.
CP
B1 300 mm,
T1 150 mm
CP-S
Stainless steel
1.4301
0.9 6143.310
B1 300 mm,
T1 150 mm
CP-L Sheet steel 0.9 6143.210
CP 6662.500
or
AE (B1 = 600 mm,
T1 210 mm)
CP-XL Sheet steel 2.2 6503.000
1
2
3
152
153
Hygienic Design
Small and compact enclosures HD
Terminal boxes HD....................................................................................154
Compact enclosures HD, single-door .......................................................155
Accessories...............................................................................................156
Hygienic Design
Terminal boxes HD
Width
Front (B1) mm Packs of 150 150 200 300 400 400 Page
Rear (B2) mm 172 177 227 327 427 427
Height
Front (H1) mm 150 150 200 200 200 300
Rear (H2) mm 172 177 227 227 227 327
Depth (T) mm 80 120 120 120 120 120
Model No. HD 1 1670.600 1671.600 1672.600 1674.600 1675.600 1676.600
Accessories
Wall spacer bracket HD 1 4000.100 4000.100 4000.100 4000.100 4000.100 4000.100 156
Mounting plate 1 1560.700 1560.700 1562.700 1563.700 1564.700 1568.700 443
Support rail TS 35/7.5 10 2314.000 2314.000 2315.000 2316.000 2317.000 2317.000 467
Cable gland HD see page 521
HD accessories Page 156 System accessories Page 355
Material:
Stainless steel 1.4301
(AISI 304), 1.5 mm
Mounting bracket:
Sheet steel, zinc-plated,
passivated, 2.0 mm
Quick-release fasteners:
Stainless steel
Seal: Silicone,
compliant with FDA Guideline
21 CFR 177.2600
Surface finish:
Brushed, grain 400,
RA< 0.8 m
Seal: Blue, dyed (RAL 5010)
IP 66 to IEC 60 529
IP 69K to DIN 40 050-9
Compliant with NEMA 13
Compliant with NEMA 4X
Compliant with NEMA 3R
Supply includes:
construction
Cover
Mounting bracket
(pre-assembled)
Seal and quick-release locks
(supplied loose)
Detailed drawing:
H
2
H
1
B
1
T
B
2
Rittal Austria
RITTAL Schaltschrnke Gesellschaft m.b.H.
Laxenburger Strae 246a A-1239 Wien
Phone: +43 (0) 5 99 40-0
Fax: +43 (0) 5 99 40-99 0
E-mail: [email protected] www.rittal.at
Hygienic Design
Compact enclosures HD, single-door
Height
Front (H1) mm 350 430 650 550 430 650 1050 1250
Rear (H2) mm 437 549 769 669 601 769 1221 1421
Depth (T) mm 155 210 210 210 300 210 300 300
Model No. HD 1 1302.600 1306.600 1308.600 1307.600 1320.600 1310.600 1316.600 1317.600
Accessories
Wall spacer bracket HD 1 4000.100 4000.100 4000.100 4000.100 4000.100 4000.100 4000.100 4000.100 156
Rails for interior installation see page 157
HD accessories Page 156 System accessories Page 355
Material:
Enclosure and door:
(AISI 304)
Lock inserts HD:
(AISI 316L)
Seal: Silicone, compliant
with FDA Guideline 21
CFR 177.2600
Surface finish:
Enclosure and door:
Brushed, grain 400,
RA< 0.8 m
Seal: Blue, dyed (RAL 5010)
IP 66 to IEC 60 529
IP 69K to DIN 40 050-9
Compliant with NEMA 13
Compliant with NEMA 4X
Supply includes:
construction
Door with press-fitted seal
Mounting plate
Detailed drawing:
F
G
T
H
2
B
H
1
Rittal Czech Republic
RITTAL Czech, s.r.o.
Ke Zdibsku 182 250 66 Zdiby u Prahy
Phone: +420 234 099 000
Fax: +420 234 099 099
E-mail: [email protected] www.rittal.cz
Hygienic Design
Accessories
Levelling feet HD
for TS 8
Benefits:
Minimises cleaning time thanks to fully
covered, permanently sealed threads.
Compensation of floor inclines up to an angle
of 10 thanks to flexible base plate.
Baying can even be achieved on sloping floors,
thanks to a large levelling range of 55 mm.
Load capacity:
Max. 5000 N static per levelling foot.
Material:
Stainless steel 1.4301 (AISI 304)
Supply includes:
Assembly parts and seals.
Thread
Levelling
range
mm
Base
mount
Packs
of
Model No.
HD
M12 120 175
without 4 4000.200
with 4 4000.210
Wall spacer bracket HD
Benefits:
Creates space for cleaning behind the
enclosure.
Shorter assembly times by eliminating the need
for an all-round seal.
Greater hygiene safety by avoiding an uncon-
trollable dead space or gap between the enclo-
sure and wall.
Functional principle:
Mounting on the wall optionally from the enclo-
sure interior via a through-hole (max. M8) or
from the rear via an integral M10 thread.
Material:
Supply includes:
Wall distance
mm
Packs of Model No. HD
50 1 4000.100
Enclosure key HD Packs of Model No. HD
1 2549.600
Bit HD
for universal key SZ 2549.500
See page 424.
1 2549.510
Cam lock HD
Hygienic Design variant for easy, safe cleaning.
Applications:
Compact enclosures AE stainless steel
(except AE 1017.XXX and AE 1019.XXX).
May be integrated into customised applica-
tions, e.g. covers of machine panels.
Material:
Stainless steel 1.4404 (AISI 316L)
Accessories:
Enclosure key HD,
see page 156.
1 2304.010
Accessories
Hygienic Design
Rails for interior installation
for compact enclosures HD
For mounting on the existing threaded bolts.
With TS system punchings on three sides.
Material:
Supply includes:
Assembly parts.
Length
mm
Packs of Model No. CM Page
510 4 5001.050 459
710 4 5001.051 459
910 4 5001.052 459
1110 4 5001.053 459
Interior installation, door
Rails for door installation
Interior installation, enclosure
Enclosure
Model No. HD Model No. CM
1316.600 5001.052 5001.050 5001.050
1317.600 5001.053
5001.051
5001.050
5001.051
5001.050
Enclosure
TS punched section without mounting flange,
17 x 73 mm
Model No. HD Model No. TS
1316.600
1317.600
8612.065
Enclosure
Rails for inte-
rior installation

TS punched
section without
mounting flange,
17 x 73 mm

Mounting
plates
Model No. HD Model No. CM Model No. TS
1308.600
1310.600
5001.050
1316.600 5001.052
8612.130
(only on lock side)
8612.400
8612.410
1317.600 5001.053
8612.130
(only on lock side)
8612.400
8612.410
1 1 1
2
1 3 4
1
3
4
2
1
158
159
Stainless steel
Small enclosures
Switch housings ........................................................................................160
Terminal boxes KL.....................................................................................161
Bus enclosures BG....................................................................................161
Compact enclosures
Compact enclosures AE............................................................................162
Compact enclosures AE, protection category IP 69K...............................165
Operating housings
Premium Panel, protection category IP 69K .............................................166
Command panel housing with door ..........................................................167
Support arm system
Support section CP-S, stainless steel .......................................................168
Support arm system CP-S, stainless steel, components ..........................169
Enclosure systems
One-piece consoles AP.............................................................................170
PC enclosure systems...............................................................................171
Baying systems TS 8.................................................................................172
Stainless steel
Switch housings
Height mm 100 100 100 100
Depth mm 90 90 90 90
Model No. SM 1 2384.010 2384.020 2384.030 2384.040
Pitch pattern (R) mm 60 60 60
No. of switch cut-outs, 22.5 mm 1 2 3 4
Number of quick-release fasteners 2 4 4 4
Accessories
Wall mounting bracket 4 1594.000 1594.000 1594.000 1594.000 439
Pressure relief stoppers 5 2459.500 2459.500 2459.500 2459.500 384
R
R
Material:
Enclosure: Stainless steel
1.4301 (AISI 304), 1.25 mm
Cover: Stainless steel 1.4301
(AISI 304), 1.25 mm, all-round
foamed-in PU seal
Surface finish:
Brushed, grain 240 or
180 (for terminal boxes)
IP 66 to IEC 60 529,
Supply includes:
scope, see tables
Approvals:
Terminal boxes KL
UL
CSA
TV
Germanischer Lloyd
of Shipping
Bureau Veritas
VDE
Bus enclosures BG
TV
VDE
UL
cUL
Detailed drawings:
Rittal Switzerland
RITTAL AG
Ringstrasse 1 CH-5432 Neuenhof
Phone: +41 (0) 56 416 06 00
Fax: +41 (0) 56 416 06 66
E-mail: [email protected] www.rittal.ch
Stainless steel
Terminal boxes KL
Bus enclosures BG
Width mm Packs of 150 150 300 200 200 Page
Height mm 150 150 150 200 200
Depth mm 80 120 80 80 120
Model No. KL 1 1521.010 1527.010 1522.010 1523.010 1528.010
Weight (kg) 1.3 1.6 1.8 1.8 2.2
Number of quick-release fasteners 4 4 4 4 4
Accessories
Mounting plate 1 1560.700 1560.700 1561.700 1562.700 1562.700 443
Wall mounting bracket 4 1594.000 1594.000 1594.000 1594.000 1594.000 439
Wall angle 4 2583.010 2583.010 2583.010 2583.010 2583.010 440
Pole clamp 1 2584.000 2584.000 2584.000 2584.000 2584.000 441
Support rails TS 35/7.5 10 2314.000 2314.000 2316.000 2315.000 2315.000 467
Cover hinge, stainless steel 1.4404 2 1592.010 1592.010 1592.010 1592.010 1592.010 425
Pressure relief stoppers 5 2459.500 2459.500 2459.500 2459.500 2459.500 384
Width mm Packs of 300 300 400 300 400 Page
Height mm 200 200 200 300 300
Depth mm 80 120 120 120 120
Model No. KL 1 1524.010 1529.010 1525.010 1526.010 1530.010
Weight (kg) 2.4 2.9 3.6 3.9 4.6
Number of quick-release fasteners 4 4 4 4 4
Accessories
Mounting plate 1 1563.700 1563.700 1564.700 1567.700 1568.700 443
Wall mounting bracket 4 1594.000 1594.000 1594.000 1594.000 1594.000 439
Wall angle 4 2583.010 2583.010 2583.010 2583.010 2583.010 440
Pole clamp 1 2584.000 2584.000 2584.000 2584.000 2584.000 441
Support rails TS 35/7.5 10 2316.000 2316.000 2317.000 2316.000 2316.000 467
Cover hinge, stainless steel 1.4404 2 1592.010 1592.010 1592.010 1592.010 1592.010 425
Pressure relief stoppers 5 2459.500 2459.500 2459.500 2459.500 2459.500 384
Width mm Packs of 200 300 400 Page
Height mm 300 300 300
Depth mm 80 80 80
Model No. BG 1 1583.010
1)
1584.010
1)
1585.010
1)
Weight (kg) 2.8 3.7 4.5
Number of quick-release fasteners 2 2 2
180 hinge, die-cast zinc, chrome-plated 2 425
Accessories
Wall mounting bracket 4 1594.000 1594.000 1594.000 439
Pole clamp 1 2584.000 2584.000 2584.000 441
Condensate discharge 6 2459.000 2459.000 2459.000 384
Height mm 200 200
Depth mm 123 123
Model No. BG 1 1558.010
2)
1559.010
2)

Weight (kg) 4.5 6.0
Number of quick-release fasteners 2 3
180 hinge, die-cast zinc, chrome-plated 2 425
Accessories
Wall mounting bracket 4 1594.000 1594.000 439
Pole clamp 1 2584.000 2584.000 441
Condensate discharge 6 2459.000 2459.000 384
1)
Support rail fixed on studs
2)
Support rail adjustable on profile strip
Stainless steel
System accessories Page 355 Compact enclosures AE, sheet steel Page 44 Hygienic Design Page 154
Material:
Door: Stainless steel, all-round
foamed-in PU seal
Locks: Die-cast zinc
Surface finish:
Enclosure and door:
Brushed, grain 240
Locks: Nickel-plated
See tables.
Supply includes:
Enclosure with door(s)
Cam lock or 3-point lock
system (for AE 1017.X00 and
AE 1019.X00) with double-bit
insert
Mounting plate
Approvals:
UL
CSA
TV
Germanischer Lloyd
Russian Maritime
Register of Shipping
Bureau Veritas
VDE
Detailed drawing:
B
T
H
F
G
Height (H) mm 300 300 300 300 300 300
Depth (T) mm 120 155 155 210 155 210
Model No. AE 1001.600 1002.600 1002.500 1003.600 1004.600 1011.600
Material
1.4301 (AISI 304) 1
1.4404 (AISI 316L) 1
Door 1 1 1 1 1 1
Weight (kg) 3.6 4.1 4.1 6.9 7.4 8.4
Protection category IP 66 to IEC 60 529, complies with NEMA 4X
Accessories
Rails for interior installation 4 2373.210 2373.210 459
Rain canopy 1.4301 (AISI 304) 1 2470.000 2470.000 2361.000 2471.000 2472.000 431
1.4301 (AISI 304) 4 2433.000 2433.000 2433.000 2433.000 2433.000 439
1.4404 (AISI 316L) 4 2433.500 439
Wall angle 1.4301 (AISI 304) 4 2583.010 2583.010 2583.010 2583.010 2583.010 2583.010 440
Pole clamp 1 2584.000 2584.000 2584.000 2584.000 2584.000 2584.000 441
Cam lock 1.4404
(AISI 316L)
Standard 1 2304.000 2304.000 2304.000 2304.000 2304.000 2304.000 421
Hygienic Design 1 2304.010 2304.010 2304.010 2304.010 2304.010 2304.010 156
Stainless steel
Height (H) mm 380 380 380 380 380 500
Depth (T) mm 210 210 210 210 210 210
Model No. AE 1 1005.600 1005.500 1006.600 1006.500 1009.600 1015.600
Material
1.4301 (AISI 304)
1.4404 (AISI 316L)
Door 1 1 1 1 1 1
Weight (kg) 8.4 8.4 9.8 9.8 14.6 12.9
Accessories
Rain canopy 1.4301 (AISI 304) 1 2361.000 2361.000 2472.000 2472.000 2473.000 431
1.4301 (AISI 304) 4 2433.000 2433.000 2433.000 2433.000 439
1.4404 (AISI 316L) 4 2433.500 2433.500 439
Wall angle 1.4301 (AISI 304) 4 2583.010 2583.010 2583.010 2583.010 2583.010 2583.010 440
Pole clamp 1 2584.000 2584.000 2584.000 2584.000 2584.000 2584.000 441
Cam lock 1.4404
(AISI 316L)
Standard 1 2304.000 2304.000 2304.000 2304.000 2304.000 2304.000 421
Hygienic Design 1 2304.010 2304.010 2304.010 2304.010 2304.010 2304.010 156
Height (H) mm 500 500 600 600 600 760
Depth (T) mm 210 300 210 210 210 210
Model No. AE 1 1007.600 1013.600 1008.600 1010.600 1010.500 1012.600
Material
1.4301 (AISI 304)
1.4404 (AISI 316L)
Door 1 1 1 1 1 1
Weight (kg) 15.7 18.4 15.1 23.5 23.5 30.2
Accessories
Rain canopy 1.4301 (AISI 304) 1 2362.000 2472.000 2473.000 2473.000 2473.000 431
1.4301 (AISI 304) 4 2433.000 2433.000 2433.000 2473.000 2433.000 439
1.4404 (AISI 316L) 4 2433.500 439
Wall angle 1.4301 (AISI 304) 4 2583.010 2583.010 2583.010 2583.010 2583.010 2583.010 440
Pole clamp 1 2584.000 2584.000 2584.000 2584.000 2584.000 2584.000 441
Cam lock 1.4404
(AISI 316L)
Standard 1 2304.000 2304.000 2304.000 2304.000 2304.000 2304.000 421
Hygienic Design 1 2304.010 2304.010 2304.010 2304.010 2304.010 2304.010 156
Rittal Hungary
RITTAL Kereskedelmi Kft.
1044 Budapest, Ipari Park u. 1.
Phone: +36 (1) 399 8000
Fax: +36 (1) 399 8009
E-mail: [email protected] www.rittal.hu
Stainless steel
Height (H) mm 760 1000 1200 1000 1200 1200
Depth (T) mm 300 300 300 300 300 300
Model No. AE 1 1014.600 1016.600 1017.600 1018.600 1019.600 1019.500
Material
1.4301 (AISI 304)
1.4404 (AISI 316L)
3-point lock system
Door(s) 1 1 1 2 2 2
Weight (kg) 42.5 52.9 61.5 71.0 76.0 76.0
Protection category IP 66 to IEC 60 529, complies with NEMA 4X IP 55 to IEC 60 529, complies with NEMA 12
Accessories
Rain canopy 1.4301 (AISI 304) 1 2474.000 2475.000 2475.000 2363.000 2363.000 2363.000 431
1.4301 (AISI 304) 4 2433.000 2433.000 2433.000 2433.000 2433.000 439
1.4404 (AISI 316L) 4 2433.500 439
Wall angle 1.4301 (AISI 304) 4 2583.010 2583.010 2583.010 2583.010 2583.010 2583.010 440
Cam lock 1.4404
(AISI 316L)
Standard 1 2304.000 2304.000 2304.000 421
Hygienic Design 1 2304.010 2304.010 2304.010 156
Rittal Japan
RITTAL K.K.
Sales HQ.
Shin-Yokohama AK Bldg 2F
3-23-3, Shin-Yokohama, Kohoku-ku
Kanagawa 222-0033
Phone: 0120-998-631 / +81 (45) 478-6801
Fax: 0120-998-632 / +81 (45) 478-6880
E-mail: [email protected] www.rittal.co.jp
Stainless steel
System accessories Page 355 AE sheet steel Page 44 AE EMC shielded Page 179 AE Ex-proof Page 176 Hygienic Design Page 154
Perfect protection in a tough
environment
The compact enclosure AE in
IP 69K is the ideal solution when
a high protection category com-
bined with corrosion resistance
is needed.
Resistant to high-pressure
cleaning (protection cate-
gory IP 69K). The interior seal
is protected against direct
hosed water.
Ideal for mounting on vehi-
cles: Lock, hinges and mount-
ing plate are all vibration
resistant.
10 roof tilt prevents liquids
from accumulating on the roof.
Foamed-in silicone seal.
The closed cell structure of
the foam means that water
absorption is negligible.
Temperature resistant from
60C to +180C.
Material:
Enclosure, hinge and lock:
(AISI 304)
Door: Stainless steel 1.4301
(AISI 304), all-round foamed-
in PU seal
Surface finish:
Enclosure and door:
Brushed, grain 240
IP 69K to DIN 40 050-9,
Supply includes:
construction
Single-door
insert
Mounting plate.
Detailed drawing:
B
T
H
2
F
G
10
H
1
Compact enclosures AE, protection category IP 69K
Height, front (H1) mm 330 400 650 650
Height, rear (H2) mm 352 439 689 689
Depth (T) mm 155 250 250 250
Mounting plate thickness mm 2 2 2.5 2.5
Model No. AE 1 1101.110 1101.120 1101.130 1101.140
Locks 1 1 2 2
Accessories
Interior door 1 1101.910 1101.920 1101.930 1101.940 406
Door stay 1 1101.800 1101.800 1101.800 1101.800 429
Wall mounting bracket, stainless steel 1.4301 (AISI 304) 4 2433.000 2433.000 2433.000 2433.000 439
Stainless steel
System accessories Page 355 TFT monitor Page 606 Support arm system CP-S, stainless steel Page 168 Hygienic Design Page 154
Optionally with or without
keyboard housing
Resistant to high-pressure
cleaning (protection cate-
gory IP 69K). The seal lies
between two seals and is
optimally compressed by the
screw fastening.
Suitable for clean room use
Screw fastening to comply
with high standards in the
food industry. With plastic
stoppers on the inside or hex
screws on the outside.
Optimum EMC conditions
The labyrinth seal achieves
a particularly high level of RF
shielding of the enclosure.
Accessibility
Internal rear panel bracket.
This solution is clearly supe-
rior to external hinges from
a hygiene point of view.
Handling
Two duct connectors between
the enclosures.
Material:
Surface finish:
Brushed, grain 240
IP 69K to DIN 40 050-9
Clean room:
Air purity class 1 to
DIN EN ISO 14 644-1
Detailed drawings:
H
B
T
H
1
Premium Panel, protection category IP 69K
Packs of Premium Panel
With keyboard housing Without keyboard housing
Model No. CP 1 6680.000
1)
6681.000
Height mm
Operating housing (H) 460 360
Keyboard housing (H1) 200
Depth mm Operating housing (T) 120 120
For installation panel
W x H
Operating housing 482.6 mm (19) x 354.8 mm (8 U) 482.6 mm (19) x 310 mm (7 U)
Keyboard housing 482.6 mm (19) x 177 mm (4 U)
Installation depth
mm
Operating housing 115 115
Keyboard housing
Front 58
Rear 63
Support arm connection Top Top, or bottom by rotating the enclosure

1)
Stainless steel
System accessories Page 355 TFT monitor Page 606 Support arm system CP-S, stainless steel Page 168 Hygienic Design Page 154
Material:
Enclosure and door:
(AISI 304)
Handle strips:
Plastic approved for use
with foodstuffs
Surface finish:
Brushed, grain 240
Colour:
Handle strips:
Similar to RAL 5002
IP 66 to IEC 60 529
Supply includes:
construction
Cut-out and reinforcement for
support arm system
Fastener with guide plate
Door with sealing frame and
side handle strips
The support arm connection
and door hinge may be
swapped over by rotating the
enclosure
Approvals:
UL
cUL
Detailed drawings:
T
H
B
Rittal USA
RITTAL Corporation
1 Rittal Place Urbana, OH 43078, USA
Phone: +1 (937) 399-0500
Fax: +1 (937) 390-5599
Toll-free: 1-800-477-4000
www.rittal-corp.com
Height (H) mm 300 300 400 400
Depth (T) mm 150 150 150 150
Model No. CP 1 6535.010 6536.010 6538.010 6539.010
Weight (kg) 6.3 7.5 8.8 12.1
Accessories
Matching mounting plate from AE 1033.500 1030.500 1380.500 1039.500 44/45
ID no. 0271.926 0274.131 0271.548 0271.351
Support rails
1)
Model No. SZ 10 2316.000 2317.000 2317.000 2319.000 467
With 3 mm double-bit lock insert, may be exchanged for 41 mm lock inserts, version C, see page 421,
1)
Only with vertical attachment of punched rail 23 x 23 mm, see page 463.
Stainless steel
Stainless steel enclosures Page 166 167 Support section CP-S, steel Page 128
Support section CP-S,
stainless steel
Attached to the connection com-
ponents via 2 clamping screws.
Size:
External diameter: 48.3 mm
Wall thickness: 3 mm
Material:
Stainless steel
Surface finish:
Brushed, grain 240 (support
section and wall console only)
IP 69K to DIN 40 050-9
(resistant to high-pressure
cleaning)
Supply includes:
Detailed drawings:
Stainless steel
R
o
t
a
t
i
n
g
/
t
i
l
t
i
n
g
R
i
g
i
d
L
e
n
g
t
h

m
m
W
e
i
g
h
t

k
g
M
a
t
e
r
i
a
l
Model No. CP
Tilting adaptor 10
0.7
1.4305
(AISI
303)
6664.100
Enclosure attachment CP-S, stainless steel
1.3
1.4305
(AISI
303)
6664.500
Housing coupling CP-S stainless steel
1.1
1.4305
(AISI
303)
6664.000
Support section CP-S, stainless steel

500
1000
2.0
3.9
1.4301
(AISI
304)
6660.050
6660.010
Angle piece 90 CP-S stainless steel
1.3
1.4305
(AISI
303)
6664.300 6664.300
Wall/base mount, rigid, CP-S stainless steel
1.7
1.4305
(AISI
303)
6663.000
Wall/base mount, rotating, CP-S stainless steel
Rear, thread M8
Front, hole 9 mm

3.9
4.5
1.4305
(AISI
303)

6663.500
6663.400
Wall console CP-S stainless steel
Rear, thread M8
Front, hole 9 mm

1.5
1.8
1.4301
(AISI
304)

6665.000
6665.500
400
600
800
200
0
0 500 1000 1500
P
e
r
m
i
s
s
i
b
l
e

s
t
a
t
i
c

l
o
a
d

[
N
]

(
e
n
c
l
o
s
u
r
e

a
n
d

v
e
r
t
i
c
a
l

s
u
p
p
o
r
t

a
r
m

s
e
c
t
i
o
n
)
Jib length (mm)
Load information
Stainless steel
System accessories Page 355 Monitors, keyboards Page 606/608 Climate control Page 207 One-piece consoles, sheet steel Page 106
Material:
1.4301 (AISI 304), 1.5 mm
Door or double door and
console lid: Stainless steel
1.4301 (AISI 304), 2.0 mm
Mounting plate:
Sheet steel, 3.0 mm
Surface finish:
Enclosure, door, console lid
and gland plates:
Brushed, grain 120
IP 55 to IEC 60 529,
Supply includes:
Enclosure, solid rear and
sides
Door or double door at front,
with locking rod
Console lid with lid stay and
cam lock latched in the enclo-
sure
insert
Gland plates, divided
Mounting plate
Approvals:
UL
CSA
TV
Germanischer Lloyd
of Shipping
VDE
Detailed drawings:
T
H
G
F
T
B
One-piece consoles AP
Height (H) mm 960 960 960 960
Depth (T) mm
Bottom 400 400 400 400
Top 480 480 480 480
Model No. AP 1 2683.600 2684.600 2685.600 2686.600
Door(s) 1 1 2 2
Weight (kg) 52.0 65.2 79.5 90.3
Accessories
Base/plinth
Height 100 mm 1 2865.000 2869.000 2867.000 2870.000 370
Height 200 mm 1 2875.000 2878.000 2885.000 2886.000 370
Cable clamp rail 2 4191.000 4192.000 4336.000 4196.000 527
Support rail TS 35/15 6 4934.000 4935.000 4933.000 4937.000 467
Hose-proof hood see page 303
Stainless steel
System accessories Page 355 PC enclosure systems, sheet steel Page 108
Material:
1.4301 (AISI 304), 1.8 mm
Rear door: Stainless steel
1.4301 (AISI 304), 2.0 mm
Gland plates: Stainless steel
1.4301 (AISI 304) 1.5 mm
Monitor field:
Single-pane safety glass,
4 mm
Surface finish:
Brushed, grain 240
IP 55 to IEC 60 529,
Supply includes:
Enclosure, solid top and sides
Rear door with locking rod
Glazed door at the top,
latched from the inside
Component shelf
Lock insert, lock no. 3524 E
Keyboard drawer with front,
swing-down for handrest and
mouse pad support
Bottom door with locking rod
Gland plate, divided
Lock with double-bit insert
Approvals:
UL
CSA
TV
Germanischer Lloyd
of Shipping
VDE
Detailed drawings:
Width (B) mm Packs of 600
Height (H) mm 1600
Depth (T) mm 620
Model No. PC 1 4650.000
Weight (kg) 115
Accessories
Base/plinth, height 100 mm 1 2855.000 370
Levelling feet, 100 mm high 1 set 2859.000 374
Base/plinth trim, modular 4 2913.000 367
Adaptor pieces, 482.6 mm (19) 8 4547.000 552
TFT holder, vertically hinged 1 2383.040 607
Component shelf, pull-out 1 set 6902.960 480
Cable clamp rail 2 4191.000 527
Connector gland see page 523
LED system light 1 4140.840 494
Compact light 1 4140.210 493
Stainless steel
System accessories Page 355 Baying systems TS 8, sheet steel Page 70
Material:
Enclosure frame, roof,
rear panel and gland plates:
(AISI 304), 1.5 mm
Door(s): Stainless steel 1.4301
(AISI 304), 2.0 mm
Mounting plate:
Sheet steel, 3.0 mm
Surface finish:
Enclosure frame and gland
plates: Uncoated
Door(s), roof, rear panel:
Exterior brushed,
grain 400
IP 55 to IEC 60 529,
Supply includes:
Enclosure frame with door(s)
Mounting plate
Gland plates
Rear panel
Roof
Locking rod with double-bit
insert
Note:
Due to the hardness of the mate-
rial, we recommend using metal
multi-tooth screw SZ 2486.300,
see page 478, for the interior
installation.
Approvals:
UL
CSA
TV
of Shipping
TV Mark
Bureau Veritas
VDE
Germanischer Lloyd
Detailed drawings:
T
F
G
H
B
Baying systems TS 8
Height (H) mm 1800 1800 1800 1800 1800 2000 2000 2000
Depth (T) mm 400 400 500 500 500 600 600 600
Model No. TS 1 8454.600 8456.600 8457.600 8455.600 8453.600 8452.600 8450.600 8451.600
Door(s) 1 2 1 1 2 1 1 2
Support strips 2 2 2
Weight (kg) 112.9 170.4 92.5 116.3 174.9 104.4 129.7 194.7
Walls
Side panels 2 8700.840 8700.840 8700.850 8700.850 8700.850 8700.060 8700.060 8700.060 385
Divider panel 1 8609.840 8609.840 8609.850 8609.850 8609.850 8609.060 8609.060 8609.060 389
Divider panel for module plates 1 8609.100 8609.100 8609.100 8609.130 8609.130 8609.130 390
Base/plinth
Height 100 mm 1 set 8701.800 8701.200 8701.600 8701.800 8701.200 8701.600 8701.800 8701.200 367
Height 200 mm 1 set 8702.800 8702.200 8702.600 8702.800 8702.200 8702.600 8702.800 8702.200 367
Trim panels, sides
Height 100 mm 1 set 8701.040 8701.040 8701.050 8701.050 8701.050 8701.060 8701.060 8701.060 367
Height 200 mm 1 set 8702.040 8702.040 8702.050 8702.050 8702.050 8702.060 8702.060 8702.060 367
Base/plinth trim, modular 4 2907.000 2907.000 2908.000 2908.000 2908.000 2913.000 2913.000 2913.000 367
Accessories
Cable clamp rails 2 4192.000 4196.000 4191.000 4192.000 4196.000 4191.000 4192.000 4196.000 527
Cable entry plates 2 8700.800 8700.120
1)
8700.600 8700.800 8700.120
1)
8700.600 8700.800 8700.120
1)
511
Wiring plan pocket, sheet steel 1 4118.000 4116.000 4116.000 4118.000 4116.000 4116.000 4118.000 4116.000 429
1)
Packs of 4
173
174
175
Ex enclosures/EMC enclosures
Ex enclosures
Stainless steel............................................................................................176
Plastic........................................................................................................177
EMC enclosures
The Rittal EMC concept.............................................................................178
EMC E-Box EB...........................................................................................178
EMC compact enclosures AE ...................................................................179
Note:
All TS 8 enclosures prepared for pressurisation on request.
Ex enclosures
Application range:
Zone 1 and 2 or 21 and 22 to
94/9/EC
Ambient temperature range:
30C to +80C
Protection type to IEC 60 079:
Equipment protection thanks
to increased safety, equipment
protection thanks to enclosure
Material:
1.4301 (AISI 304)
Cover or door:
(AISI 304), all-round foamed-in
silicone seal
Surface finish:
Enclosure: Brushed, grain 240
IP 66 to IEC 60 529
Supply includes:
Enclosure
Cover or door
Mounting plate (only for enclo-
sures with door)
Certificates:
Enclosure with cover:
PTB 03 ATEX 1013U
IEC Ex PTB 09.0033U
Enclosure with door:
PTB 02 ATEX 1082U
IEC Ex PTB 09.0035U
Approvals:
ATEX
IEC
Detailed drawing:
B
H
F
G
T
Stainless steel, with hinged door
Height (H) mm 300 380 300 380 600 600 760 760 1000
Depth (T) mm 155 210 155 210 210 210 210 300 300
Model No. KEL 1 9401.600 9409.600 9402.600 9403.600 9404.600 9405.600 9406.600 9407.600 9408.600
Cam lock with double-bit insert 1 1 1 1 2 2 2 2 2
Weight (kg) 3.8 7.7 7.4 9.7 13.3 15.6 22.3 30.5 36.3
Accessories
1)
4 2433.000 2433.000 2433.000 2433.000 2433.000 2433.000 2433.000 2433.000 2433.000 439
Support rails TS 35/7.5 10 2315.000 2316.000 2319.000 2319.000 467
Rails for interior installation 4 2373.210 2373.210 2373.210 2373.210 2373.210 2373.300 2373.300 459
Perforated mounting strip 20 2310.038 2310.038 427
1)
Stainless steel, with screw-fastened cover
Height (H) mm 150 200 150 200 300 200
Depth (T) mm 80 80 80 80 120 120
Model No. KEL 1 9301.000 9303.000 9302.000 9304.000 9306.000 9305.000
Weight (kg) 1.3 1.8 1.8 2.4 3.9 3.6
Accessories
Mounting plates 1560.700 1562.700 1561.700 1563.700 1567.700 1564.700 443
1)
4 1594.000 1594.000 1594.000 1594.000 1594.000 1594.000 439
Support rails TS 35/7.5 10 2314.000 2315.000 2316.000 2316.000 2316.000 2317.000 467
Ex enclosures
Application range:
Zone 1 and 2 or 21 and 22 to
94/9/EC
Ambient temperature range:
30C to +80C
Protection type to IEC 60 079:
Equipment protection thanks
to increased safety, equipment
protection thanks to enclosure
Material:
Enclosure: Fibre-glass-rein-
forced unsaturated polyester,
surface resistance: < 10
9

Door: Fibre-glass-reinforced
unsaturated polyester,
surface resistance: < 10
9
,
all-round foamed-in silicone
seal
zinc-plated
Colour:
RAL 9011
IP 66 to IEC 60 529
Supply includes:
Enclosure
Door
Mounting plate
Certificates:
PTB 03 ATEX 1011U
IEC Ex PTB 10.0011U
Approvals:
ATEX
IEC
Detailed drawing:
F
B
T
H
G
Plastic
Height (H) mm 300 350 400 400 600 500 600 800 1000
Depth (T) mm 150 150 200 200 200 300 200 300 300
Model No. KEL 1 9201.600 9202.600 9203.600 9204.600 9205.600 9207.600 9206.600 9208.600 9209.600
Cam lock with double-bit insert 1 1 2 2 2 2 2
3-point locking rod
Weight (kg) 3.7 4.6 6.0 6.5 11.5 12.9 15.9 24.3 39.0
Accessories
Wall mounting bracket 4 9266.000 9266.000 9266.000 9266.000 9266.000 9266.000 9266.000 9266.000 9266.000 440
Threaded inserts M6 20 1482.000 1482.000 1482.000 1482.000 1482.000 1482.000 1482.000 1482.000 1482.000 478
Mounting plate
adjustment bracket
4 1481.000 1481.000 1481.000 1481.000 1481.000 1491.000 1481.000 1491.000 1491.000 446
Support rails see page 466
Cable duct see page 525
EMC enclosures
The Rittal EMC concept
Rittal offers excellent pre-requisites for EMC
enclosure configurations in the form of its stand-
ard sheet steel enclosures, EMC-shielded enclo-
sures, and a practical range of EMC accessories.
Depending on the individual application, anything
is possible, be it closely intermeshed potential
equalisation in a standard enclosure to prevent
conducted interference, or extra shielding to pro-
tect against high-frequency electromagnetic
fields.
For Rittal EMC enclosures with a high level of
shielding, excellent attenuation levels and attrac-
tive value-for-money products are achieved on the
basis of zinc-plated metal surfaces in conjunction
with low-resistance EMC shields.
Empty enclosures and mechanical accessory
components are not subject to the European EMC
Directive and the German EMC Act.
Thanks to the basic design in conjunction with the
metal-plated enclosure body, even standard
enclosures offer a good shielding effect against
electrical fields, which in many cases is sufficient.
The large enclosures in the TS 8 series offer a
good level of shielding across a broad frequency
range, even in the standard version.
For increased EMC requirements, Rittal offers the
TS 8 enclosure in a version certified by the VDE
with high RF attenuation. This shielding concept
is also transferred to other enclosure platforms.
Further information on the topic of EMC may be
found on our website at www.rittal.com.
EMC E-Box EB
Material:
Sheet steel with aluminium zinc coating
Surface finish:
Powder-coated on the outside
Interior surfaces conductive
Colour:
RAL 7035
IP 55 to IEC 60 529
The EMC version (high RF attenuation)
has been certified by the VDE.
Note:
All sizes available on request.
EMC enclosures
EMC compact enclosures AE
Material:
Sheet steel with aluminium zinc coating
Surface finish:
Powder-coated on the outside
Interior surfaces conductive
Colour:
RAL 7035
IP 55 to IEC 60 529
The EMC version (high RF attenuation)
has been certified by the VDE.
Note:
All sizes available on request.
Approvals:
180
181
Outdoor enclosures
CS wall-mounted enclosures
Double-walled ...........................................................................................182
CS New Basic enclosures
Single-walled and one-door, width: 600 and 800 mm ..............................183
Single-walled and two-door, width: 1200 mm...........................................184
CS Toptec
Double-walled, platform TS 8....................................................................185
CS modular enclosures
Double-walled, configuration variants, width: 600 mm.............................186
Double-walled, configuration variants, width: 800 and 1200 mm.............187
CS wall-mounted enclosures
Compact enclosures AE, stainless steel Page 162 Compact enclosures AE, stainless steel, protection category IP 69K Page 165
Outdoor enclosures for wall or
pole mounting.
Enclosure-within-an-enclosure
concept, outer enclosure with
cut-out at the bottom and inte-
grated louvres on the rear panel
and side panels for ventilation.
Material:
Enclosure:
Aluminium AlMg3
Mounting plate:
Surface finish:
Powder-coated
UV-resistant pure polyester
Colour:
RAL 7035
IP 55 to IEC 60 529
Supply includes:
Double-walled outdoor enclo-
sure, fully pre-configured:
Inner enclosure with mount-
ing plate, gland plate and
security lock (CS 9791.045
with 2 security locks)
Mounting bracket for thermo-
stat or hygrostat
Outer enclosure with designer
cover and security lock 3524 E
2 C rails on the rear panel
Detailed drawing:
T
1
H
1
B
1
B
2
H
2
T
2
H
3
B
3
Double-walled
Outer enclosure
Width (B1) mm Packs of 370 420 530 630 Page
Height (H1) mm 522 560 700 780
Depth (T1) mm 210 210 265 380
Inner enclosure
Width (B2) mm 300 350 460 580
Height (H2) mm 400 440 565 580
Depth (T2) mm 170 170 220 333
Clearance width mm 280 330 440 560
Clearance height mm 380 420 545 560
Clearance depth mm 145 145 195 308
Mounting plate width (B3) mm 270 320 430 550
Mounting plate height (H3) mm 380 410 535 550
Model No. CS 1 9791.015 9791.025 9791.035 9791.045
Accessories
Wall mounting bracket 4 9765.120 9765.120 9765.120 9765.120 441
Pole clamp 1 set 2584.000 2584.000 2584.000 2584.000 441
Enclosure heaters 1 3105.330 3105.330 3105.330 3105.330 289
Hygrostat 1 3118.000 3118.000 3118.000 3118.000 294
Socket 2 2506.100 2506.100 2506.100 2506.100 508
LED system light 1 4140.810 4140.810 4140.820 4140.820 494
LED connection cable 1 4315.800 4315.800 4315.800 4315.800 495
Adaptor power pack 1 4315.860 4315.860 4315.860 4315.860 495
Climate control Page 285 Rail systems Page 464 Cable management Page 525
Outdoor enclosure with 100 mm
transport plinth and rain canopy
with projections on all sides.
Material:
Aluminium AlMg3
Surface finish:
Powder-coated
Colour:
RAL 7035
IP 55 to IEC 60 529,
complies with NEMA 3R in con-
junction with the gland plates
offered in the accessories.
Supply includes:
Single-walled outdoor enclo-
Basic enclosure with open
base
25 mm system punchings in
the roof, base, front and in the
enclosure depth
Front door(s) with door stay,
swing lever handle and
semi-cylinder, lock BJ20027
Transport plinth with screw-
fastened trim panels front and
rear
Enclosure with width 1200 mm
has two 600 mm wide mount-
ing panels
Rain canopy
Detailed drawing:
Note:
When configuring with partial
mounting panels or 482.6 mm
(19) partial installation,
punched rails are required in the
enclosure height, see page 463.
B
1
T
1
T
3 B
3
T
2
B
2
H
2
H
1
H
4
H
3
H
5
Single-walled and one-door, width: 600 and 800 mm
Width (B1) mm Packs of 600 600 600 800 800 800 Page
Height (H1) mm 800 1200 1200 800 1200 1200
Depth (T1) mm 400 400 500 400 400 500
Clearance depth (T2) mm 349 349 449 349 349 449
Rain canopy width (B3) mm 650 650 650 850 850 850
Rain canopy height (H3) mm 55 55 55 55 55 55
Rain canopy depth (T3) mm 450 450 550 450 450 550
Base/plinth height (H4) mm 100 100 100 100 100 100
Overall height (H5) mm 955 1355 1355 955 1355 1355
Model No. CS 1 9783.540 9783.550 9783.530 9783.510 9783.520 9783.610
Accessories
Concrete base/plinth 1 9765.182 9765.182 9765.082 9765.088 9765.088 9765.084 368
Gland plate, divided 1 set 9785.511 9785.511 9785.514 9785.512 9785.512 9785.513 384
Cable entry plates 2 8800.060 8800.060 8800.060 8800.080 8800.080 8800.080 511
Mounting plates 1 9765.090 9765.092 9765.092 9765.097 9765.095 9765.095 451
Mounting angles, 482.6 mm (19) 2 7685.000 7688.000 7688.000 7685.000 7688.000 7688.000 553
Installation kit for mounting angles 2 7696.000 7696.000 7696.000 7698.000 7698.000 7698.000 553
Enclosure heaters 1 3105.400 3105.400 3105.400 3105.400 3105.400 3105.400 289
Semi-cylinder, alternative closure 1 9785.040 9785.040 9785.040 9785.040 9785.040 9785.040 416
Single-walled and two-door, width: 1200 mm
Width (B1) mm Packs of 1200 1200 Page
Height (H1) mm 1200 1200
Depth (T1) mm 400 500
Clearance width (B2) mm 512 512
Clearance height (H2) mm 1112 1112
Clearance depth (T2) mm 349 449
Rain canopy width (B3) mm 1250 1250
Rain canopy height (H3) mm 55 55
Rain canopy depth (T3) mm 450 550
Base/plinth height (H4) mm 100 100
Overall height (H5) mm 1355 1355
Model No. CS 1 9784.620 9784.520 9784.640 9784.540
Without centre bar, overlapping doors
With removable centre bar, 2 lockable doors
Accessories
Concrete base/plinth 1 9765.089 9765.086 368
Gland plate, divided 1 set 2 x 9785.511 2 x 9785.514 384
Cable entry plates 2 8800.060 8800.060 511
Mounting plate for one half of the enclosure 1 9765.092 9765.092 451
Mounting plate, full installation 1 9765.191 9765.191 451
Mounting angles, 482.6 mm (19) 2 7688.000 7688.000 553
Installation kit for mounting angles 2 7696.000 7696.000 553
Enclosure heaters 1 3105.400 3105.400 289
Enclosure internal thermostat 1 3110.000 3110.000 294
Semi-cylinder
1 9785.040 9785.040 416
2 9785.042 9785.042 416
Rittal Australia
RITTAL Pty. Ltd.
Miranda NSW 2228
Phone: +61 (2) 9525 2766
Fax: +61 (2) 9525 2888
CS Toptec
Climate control Page 285 Rail systems Page 456 Cable management Page 525
Outdoor enclosure with 100 mm
transport plinth and rain canopy
with projections on all sides.
Side panels, rear panel and door
fully double-walled on the out-
side, the entire TS 8 frame is
available for interior installation.
Material:
Enclosure frame:
(AISI 304)
Enclosure panels and
base/plinth trim:
Aluminium, AlMg3
Surface finish:
Powder-coated
Colour:
RAL 7035
IP 55 to IEC 60 529
Supply includes:
TS 8 frame with 25 mm sys-
tem punchings in the roof and
base frame plus vertical sec-
tions with two mounting levels
Front door with door stay,
swing lever handle and
semi-cylinder, lock BJ20027
Side panels left and right
Rear panel
Rain canopy
Base/plinth with screw-
fastened gland plates and
screw-fastened trim panels
front and rear
All enclosure panels are
doubled and earthed (exter-
nal wall onto internal wall)
Detailed drawing:
T
3
B
3
T
1 B
1
H
4
H
2
B
2
T
2
H
1
H
3
Double-walled, platform TS 8
Width (B1) mm Packs of 600 800 600 800 Page
Height (H1) mm 1200 1200 1600 1600
Depth (T1) mm 600 600 600 600
Clearance width (B2) mm 512 712 512 712
Clearance height (H2) mm 1112 1112 1512 1512
Clearance depth (T2) mm 512 512 512 512
Rain canopy width (B3) mm 694 894 694 894
Rain canopy height (H3) mm 45 45 45 45
Rain canopy depth (T3) mm 694 694 694 694
Overall height (H4) mm 1345 1345 1745 1745
Model No. CS 1 9774.105 9774.205 9774.305 9774.405
Accessories
Concrete base/plinth 1 9765.071 9765.072 9765.071 9765.072 368
TS punched section with mounting flange as
installation kit
4 8612.060 8612.060 459
Installation bracket TS 2 7827.480 7827.480 556
Mounting plate 1 9765.092 9765.095 9765.096 451
Gland plate
Size 4 4 4 4
From
514
Qty. 2 2 2 2
Semi-cylinder 1 9785.040 9785.040 9785.040 9785.040 416
Cooling unit, 1000 W 1 9776.500 9776.500 286
Heat exchanger, 85 W/K 1 9776.102 9776.102 286
sure with base/plinth and rain
canopy projecting on all sides.
Side panels doubled up to the
outside, door and rear panel to
the inside.
Material:
Enclosure, roof and
side panel:
Aluminium AlMg3
Base/plinth, battery plinth:
Aluminium AlMg3
Surface finish:
Powder-coated
Colour:
RAL 7035
IP 55 to IEC 60 529,
complies with NEMA 3R.
Order example,
see page 187.
Other climate control devices,
from page 285.
Detailed drawings:
Double-walled, configuration variants, width: 600 mm
Width mm 600 600 600 600 Page
Height mm 800 1000 1200 1600
Depth mm 600 500 600 600
Model No. CS 9751.015 9751.075 9751.025 9751.035
Base/plinth
Standard base/plinth 100 mm 9755.015 9755.065 9755.015 9755.015
Battery plinth 350 mm 9754.025 9754.015 9754.025 9754.025
Roof-mounted climate control
Cooling unit, 1000 W 9762.212 9762.212 9762.212 9762.212 287
Heat exchanger, 30 W/K 9764.040 9764.040 9764.040 9764.040 287
Mounting frame for cooling unit 9765.051 9765.051 9765.051 9765.051 287
Climate hood 9756.015 9756.065 9756.015 9756.015
Wall-mounted climate control
Cooling unit, 1000 W 9761.212 9761.212 287
Roof
Standard roof 9757.015 9757.065 9757.015 9757.015
Roof for wall-mounted climate control 9758.015 9758.015
Side panel
Side panel for 100 mm base/plinth 9753.015 9753.175 9753.035 9753.045
Side panel for 350 mm base/plinth 9753.055 9753.195 9753.075 9753.085
Side panel for 100 mm base/plinth
and roof-mounted climate control
9753.095 9753.185 9753.115 9753.125
9753.135 9753.205 9753.155 9753.165
Delivery times available on request.
Double-walled, configuration variants, width: 800 and 1200 mm
Width mm 800 800 800 800 1200 1200 Page
Height mm 1000 1200 1200 1600 1200 1200
Depth mm 500 500 600 600 500 600
Model No. CS 9751.085 9751.045 9751.055 9751.065 9752.015 9752.025
Base/plinth
Standard base/plinth 100 mm 9755.025 9755.025 9755.035 9755.035 9755.045 9755.055
Battery plinth 350 mm 9754.035 9754.035 9754.045 9754.045
2 x
9754.015
2 x
9754.025
Roof-mounted climate control
Cooling unit, 1000 W 9762.212 9762.212 9762.212 9762.212 9762.212 9762.212 287
Heat exchanger, 30 W/K 9764.040 9764.040 9764.040 9764.040 9764.040 9764.040 287
Mounting frame for cooling unit 9765.051 9765.051 9765.051 9765.051 9765.051 9765.051 287
Climate hood 9756.025 9756.025 9756.035 9756.035 9756.045 9756.055
Wall-mounted climate control
Cooling unit, 1000 W 9761.212 9761.212 9761.212 9761.212 9761.212 287
Roof
Standard roof 9757.025 9757.025 9757.035 9757.035 9757.045 9757.055
Roof for wall-mounted climate control 9758.025 9758.035 9758.035 9758.045 9758.055
Side panel
Side panel for 100 mm base/plinth 9753.175 9753.025 9753.035 9753.045 9753.025 9753.035
Side panel for 350 mm base/plinth 9753.195 9753.065 9753.075 9753.085 9753.065 9753.075
9753.185 9753.105 9753.115 9753.125 9753.105 9753.115
9753.205 9753.145 9753.155 9753.165 9753.145 9753.155
Order example: Enclosure 800 x 1200 x 500 mm of aluminium AlMg3 with standard base/plinth and roof-mounted cooling unit.
You will need:
Enclosure: Basic enclosure 800 x 1200 x 500 mm CS 9751.045
Base/plinth: Standard base/plinth 100 mm CS 9755.025
Roof-mounted climate control: Roof-mounted cooling unit CS 9762.212
Mounting frame CS 9765.051
Climate hood CS 9756.025
Roof: Standard roof CS 9757.025
Side panel: Side panel for 100 mm base/plinth and roof-mounted climate control CS 9753.105
Rittal Belgium
RITTAL nv/sa
Industrieterrein E17/3206 Stokkelaar 8
B-9160 Lokeren
Phone: +32 (0) 9 353 9111
Fax: +32 (0) 9 355 6862
E-mail: [email protected] www.rittal.be
188
189
Power
UPS Power Modular Concept
PMC 12/PMC 12 compact .........................................................................190
PMC 40 (type 1-4) .....................................................................................191
PMC 40 (type 5) ........................................................................................192
PMC 120....................................................................................................193
PMC 200....................................................................................................194
PMC 800....................................................................................................195
PMC accessories ......................................................................................196
Power Distribution Rack
Power Distribution Rack PDR....................................................................200
Power Distribution Module PDM................................................................200
Power System Module
PSM Plus busbar .......................................................................................201
PSM Plus plug-in modules ........................................................................201
PSM busbars .............................................................................................202
PSM socket modules.................................................................................203
PSM accessories.......................................................................................204
Fuel cell system
RiCell Flex..................................................................................................205
Rittal UPS systems Power Modular Concept
Ensuring UPS protection of all processes whose availability is crucial is
more than just a question of kilowatts, autonomy and UPS redundancy.
The key here is to protect the critical load with a high UPS efficiency.
Output range
(scalable)
1 18
kVA
PMC
12
10 40
kW
PMC
40
10 120
kW
PMC
120
8 800
kW
PMC
200
64 960
kW
PMC
800
190 Rittal Catalogue 33/Power distribution
PMC 12, single-phase, output range 1 12 kVA n+1
UPS for 482.6 mm (19) racks
or as floor-standing enclosures
UPS with integral battery UPS control unit Page
Internal hot swap-compatible batteries
Model No. DK PMC 12 7857.482 7857.483 7857.430 7857.431 7857.432 7857.433 7857.434
Width x height mm 440 (19) x 176 (4 U) 440 (19) x 88 (2 U)
Depth mm 420 420 405 650 650 680 680
Weight kg 26 27 15,7 26 29 24 24
Power
VA 2000 3000 1000 2000 3000 4500 6000
Watts 1600 2400 800 1600 2400 3500 4800
Max. heat loss (W) 105 262 105 210 252 315 420
Input
Rated voltage 230 V (160 288 V)
Frequency 50/60 Hz 5%
Power factor > 0.99 with linear load
Output
Voltage 230 V 1% (200/208/220/230/240 V adjustable)
Frequency, synchronised 1 Hz
Efficiency, AC mode 88% 90% 88% 88% 90% 90% 90%
Power factor 0.8
Battery
5 years EUROBAT
Autonomy at 100% load 7 min. 5 min. 7 min. 7 min. 5 min. 12 min.
1)
8 min.
1)

Communication
Interface 1 x USB, 1 x RS232 1 x RS232
SNMP Optional network monitoring card DK 7857.420/relay card 7857.410
Operating systems supported Windows, Unix, Linux, Novell, Apple; RCCMD shutdown licence DK 7857.421
Emergency Power Off (EPO)
Connection
Input connection 230 V 10 A C14 16 A C20 10 A C14 16 A C20 Compact connector
Output connection 230 V
6 x 10 A,
C13, 2 units
switched
4 x 10 A,
C13,
2 units
switched,
1 x 16 A, C19
6 x 10 A, C13,
2 units switched
4 x 10 A,
C13,
2 units
switched,
1 x 16 A, C19
Compact connector
Standards and
certifications
Power IEC/EN 62 040-3
EMC EN 50 091-2/EN 62 040-2 class A, EN 61 000-4-2/-3/-4/-6-8/-11, EN 61 000-3-2/-3
Labelling CE, FCC
Accessories
Battery pack PMC 12 see page 196
Connection cable at output end, UPS, single-phase,
for PSM busbar
7856.027 7856.030 7856.027 7856.027 7856.030 204
1)
With an external battery pack
<
> > > > > > >
Shutdown software Page 347 Battery packs Page 196
Double conversion technology
to the highest classification
VFI-SS-111.
Supply includes:
Single-phase UPS system
Operating manual
Software on CD-ROM
RS232 cable
For 1 3 kVA:
UPS, earthing-pin connection
cable, USB cable
Also required:
Country-specific connection
cables and slide rails are
required to operate the UPS
systems,
see page 585/559.
Shutdown software Page 347
Double conversion technology
to the highest classification
VFI-SS-111.
Supply includes:
Basic module and UPS mod-
ule(s) fitted to specifications.
Battery pack(s), separate
Service:
Commissioning by Rittal.
PMC 40 modules, rack-independent
482.6 mm (19) rack, at least
800 mm deep.
Basic module ... ... plus UPS module ... ... plus battery pack produces
a complete UPS system
m
in
.
8
0
0
PMC 40 (type 1-4), 3-phase, output range scalable 10 40 kW
Type 1 Type 2 Type 3 Type 4 Page
Number of UPS modules Qty. 1 1 2 2
Number of battery packs Qty. 1 2 2 4
Maximum UPS output (with 10 kW/20 kW module) kW 10 10/20 20 20/40
UPS output with 1+1 redundancy (with 10 kW/20 kW module) kW 10 10/20
Approx. autonomies at 100% load (10 kW/20 kW modules) min. 6/ 15/5 6/ 16/5
Approx. autonomies at 50% load (10 kW/20 kW modules) min. 12/ 30/10 12/ 32/10
RS232 (D-Sub 9) and USB interface (configuration and shutdown) Qty. 1/1 1/1 1/1 1/1
Fault signal contacts (floating) Qty. 5 5 5 5
Clamping strip input/output (3L+N+PE) max. conductor cross-section mm
2
10/16 10/16 10/16 10/16
Dimensions
Width mm 485 (19) 485 (19) 485 (19) 485 (19)
Height U 11 15 18 26
Depth mm 735 735 735 735
Required distance between 482.6 mm (19) levels (min./max.) mm 690 800 690 800 690 800 690 800
Weight (approx. incl. batteries and UPS modules) kg 162 278 310 537
Model No. DK basic unit 7040.010 7040.020 7040.030 7040.040
Model No. DK PMC 40 10 kW module (order quantity acc. to type) Qty. 1 x 7040.110 1 x 7040.110 2 x 7040.110 2 x 7040.110
Model No. DK PMC 40 20 kW module (order quantity acc. to type) Qty. 1 x 7040.120 2 x 7040.120
Model No. DK
PMC 40 battery pack each n x 4 x 10 batteries (12 V/7 Ah) prewired
Packs of 7040.211 7040.212 7040.212 7040.214
Model No. DK
PMC 40 battery preparation (for export or air freight)
Drawers and battery cabling (excluding battery, quantity depending
on type)
Packs of 7040.201 7040.202 7040.202 7040.204
Accessories
SNMP monitoring card (budget) Packs of 7857.420 198
RCCMD licence, bundle of 5 licences Packs of 7857.423 347
RCCMD licence, bundle of 25 licences Packs of 7857.424 347
Note: Only UPS modules with an identical output may be combined.
UPS rack with integral power
modules and batteries
Thanks to the double conver-
sion technology (VFI-SS-111)
the output voltage is inde-
pendent from the input volt-
age and frequency
Efficient IGBT power transis-
tor technology achieves a
high operating ratio of 95%
even in part-load operation
Safe swap compatibility with
a redundant design, i.e. the
module may be exchanged
while operational
Every UPS module includes
power electronics as well as
the control unit including dis-
play
Installation, commissioning
and servicing to be carried
out by authorised experts only
Supply includes:
UPS system in the TS 8 rack
Vented front door and rear
panel
Fitted with UPS power mod-
ules (depending on configura-
tion) and batteries
The batteries must only be
installed at the point of
assembly and are delivered
separately
Note:
Only UPS modules with an iden-
tical output may be combined.
Technical information/
battery configurations:
PMC 40 (type 5), 3-phase, output range scalable 10 40 kW, redundant
Dimensions (UPS rack, without base/plinth) width x height x depth mm Packs of 600 x 2000 x 800 600 x 2000 x 1000 Page
Model No. UPS basic rack 7040.065 7040.060
Maximum no. of UPS modules 3
Maximum no. of batteries 240 (4 x 50, 6 x 40)
Maximum UPS output (with 10 kW/20 kW modules) 30/60 kW
UPS output with n+1 redundancy (with 10 kW/20 kW modules) 20/40 kW
RS232 (D-Sub 9) and USB interface (configuration and shutdown) 1/1
Fault signal contacts (floating) 5
Clamping strip input/output (3L+N+PE) max. conductor cross-section 35/50 mm
2

Weight (approx. incl. batteries and 3 UPS modules) 740 kg
Protection category of UPS system IP 20
Operating temperature range (UPS with batteries, recommended) 20 25C
Accessibility only required to front (for servicing, maintenance) 900 mm
Distance from wall at rear (due to fan cooling) 200 mm
Model No. PMC 40 10 kW module (order quantity acc. to output) 1 7040.110
Model No. PMC 40 battery pack 1 x 4 x 10 batteries, when using 10 kW modules
(12 V/7 Ah) prewired (service life 5 years under EUROBAT) Order volume n = 1-6 x
40 7040.311
Model No. PMC 40 battery pack 1 x 5 x 10 batteries, when using 20 kW modules
(12 V/7 Ah) prewired (service life 5 years under EUROBAT) Order volume n = 1-4 x
50 7040.315
Model No. PMC 40 battery preparation n x 4 x 10 (for export or air freight)
Drawers and battery cabling (n = 1-6 x, without batteries), cable set of 40
1 set 7040.301
Model No. PMC 40 battery preparation n x 5 x 10 (for export or air freight)
Drawers and battery cabling (n = 1-4 x, without batteries), cable set of 50
1 set 7040.305
Accessories
UPS monitoring/SNMP monitoring card 1 7857.420 198
Base/plinth components, front and rear, RAL 7035, 100 mm high 1 set 8601.605 361
Base/plinth trim panels, side, RAL 7035, 800 mm deep/100 mm high 1 set 8601.085 362
Modular UPS system
(up to 120 kW)
UPS power modules operate
according to the double con-
version principle (classifica-
tion to VFI-SS-111) and have a
transformerless design thanks
to the high intermediate cir-
cuit voltage
Efficient IGBT power transis-
tor technology achieves a
high operating ratio of 95%
even in part-load operation
Safe swap compatibility with
a redundant design, i.e. the
module may be exchanged
while operational
Every UPS module includes
power electronics as well as
the control unit including dis-
play
Installation, commissioning
and servicing to be carried
out by authorised experts only
Supply includes:
UPS system in the TS 8 rack
Vented front door and rear
panel
Fitted with UPS power mod-
ules (depending on configura-
tion) and batteries
Note:
Only UPS modules with an iden-
tical output may be combined.
Technical information/
battery configurations:
PMC 120, 3-phase, output range scalable 10 120 kW
Dimensions (UPS rack, without base/plinth) width x height x depth mm Packs of 600 x 2000 x 800 600 x 2000 x 1000 Page
Model No. UPS basic rack 7040.075 7040.070
Maximum no. of UPS modules 6
Maximum UPS output (with 10 kW/20 kW modules) 60/120 kW
UPS output with n+1 redundancy (with 10 kW/20 kW modules) 50/100 kW
No. of batteries (12 V/28 Ah) per module/battery bank (per 10 kW/20 kW) 40/50
No. of battery banks per battery rack
1)
, max. 3
No. of batteries (12 V/28 Ah) per battery rack
1)
, max. 150
Operating ratio (from 50% load) 95%
Operating ratio in eco-mode (100% load) 98%
RS232 (D-Sub 9) and USB interface (configuration and shutdown) 1/1
Fault signal contacts (floating) 5
Input (3L+N+PE) conductor cross-section 70/95 mm
2

Output (3L+N+PE) conductor cross-section 70/95 mm
2

Battery connection (3 x M10, joint batteries) conductor cross-section 150 mm
2

Weight (approx., UPS rack with 6 UPS modules) 285 kg
Protection category of UPS system IP 20
Operating temperature range (UPS with batteries, recommended) 20 25C
Accessibility only required to front (for servicing, maintenance) 900 mm
Distance from wall at rear (due to fan cooling) 200 mm
Also required
Battery rack, width 800 mm (max. 150 batteries) 1 7040.361
1)
7857.364
1)

Accessories
Base/plinth components, front and rear, RAL 7035, 600 mm wide/100 mm high 1 set 8601.605 361
1)
Batteries not included with the supply of the battery rack, connection cable for battery racks DK 7040.371.
Rittal PMC 200 ensures opti-
mum availability for critical appli-
cations by combining modularity
(flexible scalability and redun-
dancy, whereby up to 20 mod-
ules may be switched in paral-
lel) with decentralised parallel
architecture or DPA (redundant
protection without a single point
of failure). Transformerless,
genuine online, double-
conversion UPSs with static
bypass and classification code
VFI-SS-111.
This modular concept keeps the
purchasing and operating costs
of redundant solutions low. As
your performance requirements
grow, the UPS grows with you
even in the most confined
spaces, and with the system
operational. The benefits to you:
Less capital tie-up, inexpensive
expansion, and minimal space
requirements.
PMC 200 modules
20
20
20
20
20
20
Minimum floor space is required by a rack with three modules (2+1 redundancy) and batteries with autonomy integrated into a single rack.
The Rittal PMC 200 allows the integration of up to 5 modules (4+1 redundancy) in one rack. For this configuration, an additional battery rack
is required. The autonomy may be flexibly adapted to suit your requirements.
UPS rack UPS module Battery packs PMC 200
Examples of 32 and 40 kW module configurations and autonomies
UPS racks:
W 800 x H 2000 x
D 1000 mm
Battery racks:
W 800 x H 2000 x
D 1000 mm
Redundancy without with without with without with without with without with
UPS rack/battery rack 1/ 1/ 1/ 1/ 1/ 1/2 1/2 1/2 1/2
Number of UPS modules 1 2 2 3 3 4 4 5 5
PMC 32 module type, output in kW 32 64 32 96 64 128 96 160 128
Battery autonomy
1)
18 9 9 9 9 12 12 12 12
PMC 40 module type, output in kW 40 160 120 200 160
Battery autonomy
1)
15 9 9 9 9
1)
Minutes/modules with cos 1.0/autonomy may be extended to order. Delivery times available on request.
4
0
4
0
4
0
4
0
4
0
4
0
Up to 20 PMC modules may be gradually switched in parallel e.g. in order to supply 800 kW without redundancy or 760 kW
n+1 (with 40 kW modules) uninterrupted. May be upgraded with the system operational; no need to switch over to an
unprotected network.
Note:
This table contains only sample configurations. We would be pleased to configure your individual solution with you.
Rittal PMC 800 is the solution for
data centres with a high power
consumption. The modular
architecture allows optimum,
tailored configuration of the UPS.
The PMC 800 may be extended
to accommodate up to 12 mod-
ules, facilitating a maximum out-
put of up to 960 kW or 880 kW
(n+1), redundant. If a UPS with a
higher output is required, this
can of course be achieved with
the PMC 800.
UPS PMC 800 at a glance:
Topology: On-line, double
conversion, VFI-SS-111.
Technology: Transformerless
Architecture: Modular, may be
connected in parallel
Maximum output in standard
configuration: 800 kW (higher
outputs available on request)
Operating ratio at 25/50/75/
100% load
(cos phi = 0.8): 92/93.5/95/
95%
Use of battery racks:
Examples of 64 and 80 kW module configurations
PMC 800
Redundancy (n+1) without with without with without with without with
Module with 64 kW 192 128 384 320 576 512 768 704
Module with 80 kW 240 160 480 400 720 640 960 880
Batteries Battery rack, e.g. 28 Ah batteries or battery racks, e.g. 70 Ah batteries
UPS racks W x H x D mm 1400 x 1900 x 870
The separation into one power module and one control module is exemplary for UPS systems in this output class.
This ensures a high level of service-friendliness and allows precise planning of maintenance work.
Note:
This table contains only sample configurations. We would be pleased to configure your individual solution with you.
Accessories
Battery packs
for PMC 12
To operate or increase the power of PMC 12 UPS
systems. With overload protection. Vertical siting
is also possible. Battery packs are hot plug-
compatible (replacement of batteries while opera-
tional). Batteries can be exchanged from the front,
without removing the battery pack from the
482.6 mm (19) level. Depending on the UPS
version, 2 3 battery packs may be connected
together to increase the autonomy. Cooling of the
UPS and the battery packs is absolutely essential.
Material:
Maintenance-free lead gel accumulators,
service life 5 years (to EUROBAT)
Supply includes:
Fully preassembled and populated with
accumulators (12 V/7 Ah)
0.5 m connection cable with connector
Feet.
Note:
For mounting in the 482.6 mm (19) rack,
a slide rail DK 7063.883 is required.
Autonomy (min.) at 100% load:
XL version Standard version
UPS PMC 12 system 7857.482 7857.483 7857.430 7857.431 7857.432 7857.433 7857.434
Battery packs Model No. DK 7857.488 7857.488 7857.435 7857.437 7857.437 7857.442 7857.442
Width mm 465 465 465 465 465 465 465
Height mm 178 (4 U) 178 (4 U) 89 (2 U) 89 (2 U) 89 (2 U) 133.5 (3 U) 133.5 (3 U)
Depth mm 420 420 650 650 650 650 650
Weight kg 35 35 20 20 20 55 55
Number of batteries
per battery pack
12 12 6 6 6 20 20
UPS PMC 12
In supplied
state
Battery packs
1
1
(XL version)
2
2
(XL version)
3
7857.430, 1 kVA 7 min. 28 min. 55 min.
7857.482/7857.431, 2 kVA 7 min. 17 min. 26 min. 29 min. 54 min.
7857.483/7857.432, 3 kVA 5 min. 12 min. 24 min. 20 min. 46 min.
7857.433, 4.5 kVA 9 min. 23 min. 39 min.
7857.434, 6 kVA 8 min. 20 min. 33 min.
1
2
Mechanical maintenance
bypass
for PMC 12
Facilitates uninterrupted removal/maintenance of
the UPS. Various designs are required depending
on the UPS output category.
Connection of the bypass for 1 3 kVA UPS
models is via a connector (plug & play), while the
4.5 and 6 kVA UPS variant must be installed by a
qualified electrician. It is important to ensure the
correct prefuse of the UPS bypass depending on
the UPS power used.
Dimensions:
W x H x D (mm):
465 x 88 (2 U) x 80 (DK 7857.440)
465 x 88 (2 U) x 350 (DK 7857.441)
Model No. DK
1 3 kVA
(incl. UPS fuse 16 A)
7857.440
4.5 6 kVA
(incl. UPS fuse 32 A)
7857.441
1
2
Relay card
for PMC 12
This card allows the UPS alarm messages (5 UPS
alarms) to be forwarded to external indicator
devices (e.g. building services management)
via floating contacts.
The card is plugged into the extension slot on the
rear of the PMC 12 UPS.
Note:
Cannot be used together with the SNMP card.
Packs of Model No. DK
1 7857.410
Accessories
Sub-distribution
for PMC 12
Outlets 4 x C19 and 2 x 32 A CEE-conforming,
single-phase, individually fused. Allows the direct
connection of up to 6 pieces of equipment.
Installation must be carried out by a qualified
electrician.
Dimensions:
W x H x D (mm): 482.6 (19) x 131 (3 U) x 300
Technical specifications:
Ambient conditions:
Temperature: 5 40C
Humidity:
5 90% rel. humidity (non-condensing)
Input (open ends with wire end ferrules):
3 x 6 mm (2 m)
Output:
4 x C19 jack, 2 x CEE 32 A coupling
Fuses:
4 x 16 AC, 2 x 32 A type C
1 7857.445
Plug & play sub-distribution
for PMC 12, 4.5 and 6 kVA
This sub-distribution facilitates simple installation
and commissioning of the PMC 12 UPS, 4.5 and
6 kVA. All that is needed is a single-phase 32 A
connection to DIN/EN 60 309.
Dimensions:
W x H x D (mm): 482.6 (19) x 88 (2 U) x 300
Ambient conditions:
Temperature: 5 40C
Humidity:
UPS connection PMC 12:
Via connection cables with fitted Harting
connector (1.5 m)
Input (connection cable):
3 x 4 mm (3 m) with 32 CEE connector,
single-phase
Output:
2 x C19 jack, 4 x C13 jack
Fuses:
2 x 16 AC, 4 x 10 A type C
1 7857.448
1
2
Parallel hot swap chassis
for PMC 12, 4.5 and 6 kVA
Facilitates parallel switching of 2 (or 3) PMC UPS
systems to increase the output or redundancy of
the UPS. A mechanical maintenance bypass is
also integrated.
Parallel connection is only possible with the 4.5
and 6 kVA PMC 12 version. The two UPS systems
to be connected in parallel must have identical
battery configurations (number/type of battery
packs). The autonomy of the system will not be
increased as a result of parallel connection.
Installation must be carried out by a qualified
electrician.
Dimensions:
W x H x D (mm): 482.6 (19) x 88 (2 U) x 300
Ambient conditions:
Temperature: 5 40C
Humidity:
UPS connection PMC 12:
Via connection cables with fitted Harting
connector (1 m)
Input (connection cable):
3 x 10/16 mm (2 m) with open cable end and
wire end ferrules
Output (connection cable):
3 x 10/16 mm (2 m) with open cable end and
wire end ferrules
Fuses (UPS input):
2 x 2 x 32 A type C (for DK 7857.442)
3 x 2 x 32 A type C (for DK 7857.443)
Note:
Commissioning of a PMC 12 UPS connected in
parallel must only be carried out by a member of
the Rittal Service team because the UPS may be
destroyed if wrongly configured.
Additionally, we recommend the use of the
PMC 12 sub-distribution (DK 7857.445).
for UPS systems Packs of Model No. DK
2 1 7857.443
3 1 7857.444
1
2
Accessories
Sub-distribution
for PMC 40 UPS
Allows the direct, fused connection of single- and
3-phase equipment. In this way, up to 4 PSM bus-
bars may be connected directly to the PMC 40
UPS via the relevant connection cables.
Additionally, there are six single-phase outlets
(16 A) available via C19 jacks.
Connection to the PMC 40 UPS must be carried
out by a qualified electrician.
Dimensions:
W x H x D: 482.6 (19) x 131 mm (3 U) x 300 mm
Ambient conditions:
Temperature: 5 40C
Humidity:
Input (open ends with wire end ferrules):
5 x 16 mm (2 m)
Output:
4 x GST18 (3-phase), 6 x C19 (1-phase)
Fuses:
18 x 16 AC
Note:
Observe the country-specific connection data.
Plug & play connection cable for server enclosures:
1 7040.500
Length Packs of Model No. DK
3 m 1 7857.130
5 m 1 7857.150
8 m 1 7857.180
9 m 1 7857.190
Sub-distribution, modular
for PMC 200
The distributor may be fitted directly in the UPS
PMC 200 rack. This allows the configuration of a
complete, compact system with a 0.6 m
2
footprint
containing a rack-mounted modular UPS
PMC 200, batteries and distributor.
Application range:
UPS systems Rittal Power Modular Concept
PMC 200 up to 20 kW N+1.
482.6 mm (19) , 6 U
12 outlets, three-phase 400 V/50 Hz with 10 A
On-load isolator for disconnecting
Circuit-breaker 10 A per phase
Supply includes:
482.6 mm (19) modules, 6 U, instructions.
Note:
Observe the country-specific connection data.
Plug & play connection cable for server enclosures:
Also required:
UPV PMC 200, 60 kW, see page 194.
Design Model No. DK
482.6 mm (19), 6 U 7857.372
3 m 1 7857.130
5 m 1 7857.150
8 m 1 7857.180
9 m 1 7857.190
UPS monitoring card
(SNMP card)
This optional monitoring card facilitates monitor-
ing of the UPS via Web browsers. In this way,
various monitoring states of the UPS (e.g. input
voltage, output currents/power per phase,
battery charging status, autonomies etc.) may be
remotely monitored. However, the main applica-
tion is a controlled server shutdown via the net-
work interface. To this end, a UPS shutdown
client (RCCMD software) must be installed and
configured on every server.
Note:
Only one extension card may be installed per UPS
system.
Redundant monitoring solutions for UPS systems
available on request.
RCCMD software, see page 347.
Design Packs of Model No. DK
SNMP card, budget version 1 7857.420
SNMP card CS121
with swtiching contacts
1 7857.366
Accessories
1
2
Battery Manager RiBat
for PMC 200/800
Management system for the batteries in a UPS.
RiBat can extend the service life of a battery by
up to 30%.
Benefits:
Optimised charging for each individual battery.
Temperature monitoring per battery.
Early identification of defective batteries.
Supports preventive maintenance of batteries.
Defective batteries can be restored rather than
replaced before reaching the end of their use-
ful life.
RiBat Manager replaces the internal SNMP card
of the UPS.
The Rittal battery manager RiBat determines all
relevant data such as battery voltage, internal
resistance, discharge curve, temperature etc.
throughout the service life of the monitored batter-
ies. This data is evaluated and used to control the
charging process. RiBat facilitates optimum
charging of each individual battery.
The RiBat module regulates the charging process
for each connected battery. This avoids over-
charging of a battery which is connected to other
batteries. This technology can extend the service
life of a battery by up to 30%. The RiBat modules
are connected using preassembled cables and
connected to the RiBat Manager.
Up to 250 modules may be connected to one
RiBat Manager.
Technical specifications
RiBat Manager:
Supply voltage: 9 30 V DC
Serial interface: 3 x RS232
LAN interface: 10/100 MBit full/half
Supported protocols:
SNMP, RCCMD, SNMP, HTTP
Alarm contact: 1 floating contact
Display: LCD display
Temperature range: 5C 45C,
90% humidity, non-condensing
Certifications: CEE, WEEE, RoHS
RiBat module:
Battery voltage: 12 V DC
Battery capacity: 7 300 Ah
W x H x D: 800 x 55 x 27 mm
Certifications: CEE, WEEE, RoHS
Designation Model No. DK
RiBat Manager 7857.800
RiBat module 7857.801
RiBat cable kit 120 batteries 7857.802
1)

RiBat cable kit 150 batteries 7857.803
2)

1)
In conjunction with a battery rack for 120 batteries
2)
In conjunction with a battery rack for 150 batteries
1
2
TCP/IP
Battery Manager
Battery
Module
RCCMD software
Client software for controlled server shutdown
see page 347.
Power Distribution Rack PDR
To accommodate a maximum
of 8 PDM
Height 1.20 m for 4 PDMs and
2 m height for 8 PDMs
PDM may be retrofitted whilst
operational
A maximum of 32 racks may
be fitted to the sub-distributor
Fully shock-hazard protected
Main switch in various
options:
Isolator switch
On-load isolator
Air circuit-breaker
RC circuit-breaker
Low-voltage distribution
up to 250 A
Material:
Sheet steel
Surface finish:
Enclosure frame:
Dipcoat-primed
Doors, roof and base/plinth:
coated
Gland plates, punched sec-
tions with mounting flanges
and mounting angles:
Zinc-plated, clear-chromated
Colour:
RAL 7035
Supply includes:
Enclosure frame with door
(without tubular door frame),
Rear panel,
Side panels and roof plate,
Levelling feet incl. base/plinth
adaptor,
Earthing of all enclosure
panels,
Busbars shock-hazard-
protected
Main switch integral.
Note:
Observe the standards of the
local power supply companies.
Approvals:
VDE
Detailed drawings:
Power Distribution Module
PDM
Mechanically latchable in the
PDR
Scalable
RC circuit-breaker, optional
Supply includes:
482.6 mm (19) module, 3 U
Incl. master switch
4 fused 3-phase outlets to the
rack
3 x 230 V/16 A per outlet
Connected load 400 V/3 AC,
max. 63 A
Power Distribution Rack PDR
Power Distribution Module PDM
Packs of Page
Possible number of PDM modules 4 8
Dimensions mm

W x H x D 800 x 1200 x 500 800 x 2000 x 500
Model No. DK 1 7857.310
1)
7857.300
1)

Accessories
Base/plinth components front and rear
Height 100 mm 1 set 8601.800 8601.800 361
Height 200 mm 1 set 8602.800 8602.800 361
Height 100 mm 1 set 8601.050 8601.050 362
Height 200 mm 1 set 8602.050 8602.050 362
1)
Packs of
Design 4 outlets per 10 kW 4 outlets project-specific
Dimensions mm W x H 19 (482.6 mm) x 3 U
Model No. DK 1 7857.320 7857.350
Also required
Plug & play connection cable
for PSM busbar to the server enclosures
Length 3 m 1 7857.130
Length 5 m 1 7857.150
Length 8 m 1 7857.180
Length 9 m 1 7857.190
Connection cable 32 A CEE-conforming
connector, for operation without PDR
1 7857.321
Power System Module Plus
Power System Module
PSM Plus
Current carrying capacity up to 192 A per rack
Busbar with redundant design and 3-phase
infeed.
By integrating two further three-phase circuits the
PSM Plus now has four independent three-phase
infeeds. Each of the feeds can be supplied with
up to 3 x 16 A, producing a total of max. 192 A.
With four independent infeeds, it is possible to
assemble a redundant, high-MTBF power supply
system for IT racks.
The benefits at a glance:
2 m busbar with four independent infeeds
(A, B, C, D each 400 V/3~, 50/60 Hz, 3 x 16 A).
Shock-hazard-protected; may be retrofitted
whilst the system is operational.
With four integral connection cables, each 3 m
long, 5 x 2.5 mm
2
and Wieland GST connec-
tors.
Directly suitable for connecting to Rittal PDM.
Easily integrated into existing applications with
standard extension cables.
6 slots per 2 m busbar
Attachment with no loss of U in the rack.
Note:
PSM Plus bar for modules with two infeeds.
This means that redundancy can now be
achieved at module level.
Only fits PSM Plus socket modules.
PSM Plus busbar
For enclosure height
mm
Number of modules Model No. DK
2000 6 7856.015
PSM Plus plug-in modules
Connector pattern Number of sockets
C13 6 (3 x per infeed) 7856.081
C19 4 (2 x per infeed) 7856.231
Earthing-pin 2 (1 x per infeed) 7856.101
PSM Plus connection cable
Length Type Connections
5 m
3-phase supply connection
cable
Three-phase connector EN 60 309
on Wieland GST socket
7856.018
5 m Extension cable
Wieland GST socket
on Wieland GST 18 connector
7856.017
A
B
A
B
C
D
Power System Module
PSM busbars
PSM busbars + PSM socket
modules
PSM busbars
The modular system facilitates basic configura-
tion of the racks, thanks to a vertical support rail
with 1/3-phase infeed. The various socket mod-
ules to supply the active components may be
snap-fitted into the support rail. This can even be
done whilst the system is operational, because
the support section is shock-hazard protected.
PSM socket modules
The various modules, earthing pins, IEC 320 etc.
may be inserted into the support rail in any combi-
nation. This is easily achieved, even by non-elec-
tricians, thanks to the shock hazard protected
plug & play system.
Approvals:
Technical specifications/benefits:
Each plug-in module picks off a phase on the
support rail, either from infeed A or from the
redundant infeed B, depending on the direc-
tion of connection.
1-/3-phase construction with a maximum cur-
rent of 2 x (3 x 16 A).
3-phase redundant infeed supported.
The redundant circuit is completely separate
from the 3 phases of the support rail.
Modules may be retrofitted whilst operational.
Modules may be equipped with integral over-
current protection, so that only the affected
module is deactivated in the event of an exces-
sively high current. The other modules remain
operational.
Overvoltage protection may be integrated into
the supply line.
Various modules also available with current
measurement and switchable outputs.
A
B
1
2
3
4
PSM busbars
Also required:
PSM socket modules,
see page 203.
Accessories:
Mounting kit for PSM busbars,
see page 204.
Connection cables,
see page 204.
Cable lock,
see page 204.
Overvoltage protection,
see page 204.
For
enclosure
height
mm
Phases
per
infeed
No. of
infeeds
Input
current
(A)
Maximum
no. of
module
slots
Connec-
tion,
connector
type
Circuit-
breaker
16 A
Earth-
leakage
circuit-
breaker
RCD
Packs
of
Model No.
DK
With measurement of voltage, current and power (consumption), via CMC, remote-controllable
2000 3 2 16 6 Jack 1 7856.016
2000 1 1 32 6 CEE 2 1 7856.003
With 2 infeeds (jack), 3-phase redundancy
1200 3 2 16 4 Jack 1 7856.010
2000 3 2 16 7 Jack 1 7856.020
2200 3 2 16 8 Jack 1 7856.008
With 3 m connection cable (wire end ferrules)
2000 3 1 16 7
Wire end
ferrules
1 7856.005
2000 3 2 16 7
Wire end
ferrules
1 7856.006
With 3 m connection cable (connector type CEE/EN 60 309)
2000 1 1 32 6 CEE 2 1 7856.321
2000 3 1 32 6 CEE 6 1 7856.323
2000 1 1 32 6 CEE 2 1 7856.043
1
2
3
4
PSM socket modules
Power System Module
1
2
3
4
5
PSM socket modules
Approvals:
Module slots required
in PSM busbar
Connector pattern Slots
Thermal overcurrent
protection
Packs of Model No.
Standard socket modules/non-switchable
1 C13 6 1 7856.080
1 C13 6 1 7856.070
1 C13 4 /per output 1 7856.220
1 Earthing-pin 4 1 7856.100
1 Earthing-pin 4 1 7856.090
1 C19 4 1 7856.230
1 C13 red 6 1 7856.082
1 Earthing-pin, red 4 1 7856.240
2 C13 8 RCD 1 7856.095
International socket modules
1 France/Belgium 4 1 7856.120
1 France/Belgium 4 1 7856.110
1 Switzerland 5 1 7856.190
1 Switzerland 4 1 7856.180
1 UK 3 1 7856.160
1 UK 3 1 7856.150
1 USA (120 V/208 V) 5 1 7856.140
1 USA (120 V/208 V) 5 1 7856.130
Socket modules with LED display/current measurement per module
1 C13 6 1 7859.120
1 C19 4 1 7859.130
Socket modules with switchable slot/aggregate current measurement per module
2 C13 8 1 7856.201
2 Earthing-pin/C13 4/2 1 7856.203
2 C19/C13 4/2 1 7856.204
Socket modules with switchable slot/individual current measurement per slot
2 Earthing-pin/C13 4/2 1 7859.212
2 C13 8 1 7859.222
2 C19/C13 4/2 1 7859.232
1
2
3
4
5
Power System Module
Accessories
Mounting kit
for PSM busbars
Without cable routing With cable routing
For Model No. DK
TS For static installation 7856.011
TE For static installation 7000.684
For Model No. DK
TS
For static installation 7856.022
Adjustable,
for freely accessible
482.6 mm (19) level
7856.023
Connection cable
for PSM-busbar

Connection cable, 3-phase
CEE-conforming 5-pole/16 A 3 m 1 7856.025
Connection cable, single-phase
CEE-conforming 3-pole/16 A 3 m 1 7856.026
Connection cable, UPS, single-phase
C14/X-Com 10 A 3 m 1 7856.027
C20/X-Com 16 A 3 m 1 7856.030
Connection cable C19/C20
16 A 2 m 1 7200.217
Connection cable C13/C14
16 A 0.5 m 2 7856.014
Cable lock PSM
for all modules with EN 60 320 C13 connector
configurations
All terminal connection cables are therefore pro-
tected against unintentional disconnection of the
power supply. Two bars are needed for two
cables.
Accessories:
Optimum locking function is only achieved
with connection cable DK 7856.014,
see page 204.
Bar 20 7856.013
Measurement module PSM
For power measurement of existing PSM or for
new installations.
Suitable for for PSM busbar:
DK 7856.010, DK 7856.020, DK 7856.008.
Note:
Detailed information, see PSM rail with
measurement, page 202.
1 7856.019
Overvoltage protection PSM
Is connected upstream of the busbar.
Fine fuse
Connection:
Socket Wago X-Com
Connector Wago X-Com
Note:
One adaptor is required for each infeed.
Overvoltage protection Packs of Model No. DK
With adaptor connector 1 7856.170
RiCell Flex fuel cell system
Application:
Emergency power supplies,
e.g. for mobile telecommuni-
cation base stations
Indoor and outdoor use
Temporary power supplies
UPS applications
High-MTBF applications
Balancing energy supplies
Material:
Enclosure frame:
(AISI 304)
Door, side panels, roof:
Aluminium AlMg3,
powder-coated
Colour:
RAL 7035
Supply includes:
Ready-to-connect fuel cell
system including climate
control. Hydrogen supply
not included.
3 fuel cell modules fitted for
7.5 kW
Controller
Project planning:
Higher level of cascading
Different output voltages
Housing for gas cylinders
Primary power supply
T
B
H
1
H
2
Width (B) mm 850
Height (H1) mm 2000

Depth (T) mm 850
Base/plinth height mm 100
Overall height (H2) mm 2100

Model No. FC 1782.135
Fuel cell module
Power consumption 2000 watts
Maximum power output 2500 watts
1)

Output voltage 44.0 to 55.5 V DC
Noise generation < 60 dB (A) at distance of 1 m
Weight 28 kg
Hydrogen supply
Gas type Hydrogen, purity 99.9%, class 3.0
Consumption 10 slpm (standard litres per minute) per kW
Typical autonomy time
Freely scalable with bottle batteries;
600 l (1 bundle), 200 bar hydrogen provides for more than 24 h autonomy at 6 kW full load
Input pressure 12.0 to 20.0 bar
Ambient conditions
Temperature range 33C to +45C
Relative humidity 5% to 95%, non-condensing
Height above mean sea level 60 m to 2000 m; thereafter 5% power reduction per 1000 m
Monitoring
Interfaces Ethernet TCP/IP
Software Web-based user interface with display for status messages, event log and parameters
Alarm outputs 4 floating contacts: H2 low; Non-critical error; Serious error; FC in operation
1)
Begin of life (BOL).
206
207
Climate control
Cooling with ambient air
TopTherm fan-and-filter units ....................................................................212
Rack-mounted fans/tangential fans...........................................................217
Fan systems ..............................................................................................219
Air/air heat exchangers .............................................................................226
Cooling units
Thermoelectric cooler................................................................................232
Wall-mounted cooling units .......................................................................233
Roof-mounted cooling units ......................................................................244
Modular climate control concept...............................................................248
Liquid cooling
Air/water heat exchangers ........................................................................252
Cold Plate..................................................................................................262
Chillers for water........................................................................................264
IT cooling
Chillers for IT cooling.................................................................................272
CRAC system............................................................................................274
Aisle containment ......................................................................................278
Liquid Cooling Package............................................................................279
CS Outdoor climate control
Air/air heat exchangers and cooling units for CS Toptec .........................286
Air/air heat exchangers and cooling units for CS modular enclosures.....287
Enclosure heaters
Enclosure heaters......................................................................................289
Climate control accessories
Air routing..................................................................................................291
Control/regulation......................................................................................293
Mounting accessories ...............................................................................296
Filter technology ........................................................................................299
General ......................................................................................................302
Generation Blue e
Save energy permanently with Rittal cooling units.
Savings of up to 45% energy consumption with the same
cooling output (ideally 70% compared with a conventional
Rittal TopTherm Plus cooling unit in field trials).
208
209
As system providers, Rittal are the worlds top suppliers of exceptionally
effective, energy-saving and environmentally-friendly climate control
solutions, precisely tailored to the customers individual requirements.
Your benefits
Planning and engineering
RiTherm climate calculation software for requirement-based
dimensioning
Rittal system consulting for optimised cost and energy efficiency
Products
Energy-saving enclosure climate control for all ambient conditions in
the industrial sector
Effective, application-oriented product solutions for machine and
process cooling
Efficient, cost-saving IT climate control concepts, from individual server
enclosures through to high-MTBF data centres
Service
Contiguous global delivery and service network
Global spare parts service
Our own accredited laboratories for testing and simulation of climate
conditions
Experts in climate control
210
211
Cooling with ambient air
TopTherm fan-and-filter units
TopTherm fan-and-filter unit .................................. 20 66 m
3
/h..............212
TopTherm fan-and-filter unit .............................. 105 120 m
3
/h..............213
3
/h..............214
3
/h..............215
TopTherm fan-and-filter unit ........................................900 m
3
/h..............216
Conversion table old/new..........................................................................216
Rack-mounted climate control
Rack-mounted fan.................................................320/480 m
3
/h..............217
Vario rack-mounted fan.........................................320/480 m
3
/h..............218
Tangential fan...............................................................320 m
3
/h..............218
Fan systems
RTT roof-mounted fan............................................400/800 m
3
/h..............219
Roof-mounted fan.........................................................360 m
3
/h..............220
Roof-mounted fan for the office sector .......................1500 m
3
/h..............220
Enclosure internal fan...................................................160 m
3
/h..............221
Fan mounting plate.......................................................180 m
3
/h..............221
Mini-fan...........................................................................21 m
3
/h..............222
Fan expansion kit ............................................... 108 184 m
3
/h..............222
Fan roof, modular, two-piece ................................160/180 m
3
/h..............223
Fan unit, active .............................................................160 m
3
/h..............224
Fan mounting plate DC .............................................1050 m
3
/h..............224
Door-mounted fan ........................................................600 m
3
/h..............225
Fan expansion kit ......................................................................................225
Air/air heat exchangers
Wall-mounted .............................................................12/62 W/K..............226
Wall-mounted with controller ................................17.5 90 W/K..............227
Wall-mounted, railway-compatible version .............27 98 W/K..............228
Roof-mounted..................................................................66 W/K..............229
212 Rittal Catalogue 33/Climate control
Climate control accessories Page 291 Software & services Page 333
Colour:
RAL 7035
See tables.
Supply includes:
Unit ready for installation
Filter mat
Note:
For energy-efficient operation
of the fan-and-filter units, we
recommend using the enclosure
internal thermostat SK 3110.000,
the speed control SK 3120.200
or the digital thermostat with
display SK 3114.200
(see accessories).
Approvals:
Detailed drawing:
Performance diagrams:
H
T
1
T
2
B
Air throughput 20 66 m
3
/h
Model No. SK fan-and-filter unit 3237.100 3237.600 3237.110 3237.124 3238.100 3238.600 3238.110 3238.124 Page
EMC version
Rated operating voltage V, Hz 230, 50/60 115, 50/60 24 (DC) 230, 50/60 115, 50/60 24 (DC)
Dimensions mm
W (B) x H 116.5 x 116.5 148.5 x 148.5
D (T1) 16 16
Max. installation depth mm D (T2) 43 58.5
Air throughput, unimpeded air flow 20/25 m
3
/h 20 m
3
/h 55/66 m
3
/h 55 m
3
/h
Air throughput with outlet filter
including standard filter mat
1 x SK 3237.200: 15/18 m
3
/h
1 x SK 3238.200: 43/50 m
3
/h
2 x SK 3238.200: 48/57 m
3
/h
Diagonal fan Self-starting shaded pole motor DC motor Self-starting shaded pole motor DC motor
Rated current
0.065 A/
0.052 A
0.12 A/
0.10 A
0.125 A
0.12 A/
0.11 A
0.24 A/
0.22 A
0.23 A
Power consumption 11 W/9 W 3 W 19 W/18 W 5.5 W
Pre-fuse 2 A
Noise level 38/43 dB (A) 38 dB (A) 46/49 dB (A) 46 dB (A)
Operating temperature range 15C to +55C
Storage temperature range 30C to +70C
Protection category
Standard IP 54 IP 54 IP 54 IP 54 IP 54 IP 54 IP 54 IP 54
With hose-proof hood IP 56 IP 56 IP 56 IP 56 IP 56 IP 56 IP 56 IP 56
SK outlet filter 1 3237.200 3237.200 3237.200 3238.200 3238.200 3238.200 303
SK outlet filter EMC 1 3237.060 3238.060 303
Spare filter mats 5 3321.700 3237.066 3321.700 3321.700 3238.066 3238.066 3322.700 3322.700 301
Fine filter mats 5 3238.055 3238.055 3238.055 3238.055 302
Hose-proof hood 1 3237.080 3237.080 3237.080 3237.080 3238.080 3238.080 3238.080 3238.080 303
Blanking cover 1 3237.020 3237.020 3237.020 3237.020 3238.020 3238.020 3238.020 3238.020 303
Enclosure internal thermostat 1 3110.000 3110.000 3110.000 3110.000 3110.000 3110.000 3110.000 3110.000 294
Digital temperature display/thermostat 1 3114.200 3114.200 3114.200 3114.200 3114.200 3114.200 3114.200 3114.200 293
Hygrostat 1 3118.000 3118.000 3118.000 3118.000 3118.000 3118.000 3118.000 3118.000 294
Speed control 1 3120.200 3120.200 3120.200 3120.200 3120.200 3120.200 295
Special voltages available on request. We reserve the right to make technical modifications.
3
/h
Model No. SK fan-and-filter unit 3239.100 3239.600 3239.110 3239.124 Page
EMC version
Rated operating voltage V, Hz 230, 50/60 115, 50/60 24 (DC)
Dimensions mm
W (B) x H 204 x 204
D (T1) 24
Max. installation depth mm D (T2) 90
3
/h 105 m
3
/h
1 x SK 3239.200: 87/100 m
3
/h
2 x SK 3239.200: 93/108 m
3
/h
1 x SK 3240.200: 98/111 m
3
/h
Diagonal fan Self-starting shaded pole motor DC motor
Rated current 0.12 A/0.11 A 0.24 A/0.22 A 0.23 A
Power consumption 19 W/18 W 5.5 W
Pre-fuse 2 A
Noise level 46/49 dB (A) 46 dB (A)
Protection category
Standard IP 54 IP 54 IP 54 IP 54
With additional fine filter mat or hose-proof hood IP 55 IP 55 IP 55 IP 55
With hose-proof hood IP 56 IP 56 IP 56 IP 56
SK outlet filter 1 3239.200 3239.200 3239.200 303
SK outlet filter EMC 1 3239.060 303
Spare filter mats 5 3171.100 3239.066 3171.100 3171.100 301
Fine filter mats 5 3181.100 3181.100 3181.100 3181.100 302
Hose-proof hood 1 3239.080 3239.080 3239.080 3239.080 303
Blanking cover 1 3239.020 3239.020 3239.020 3239.020 303
Digital temperature display/thermostat 1 3114.200 3114.200 3114.200 3114.200 293
Hygrostat 1 3118.000 3118.000 3118.000 3118.000 294
Speed control 1 3120.200 3120.200 3120.200 3120.200 295
Rittal Germany
Phone: +49(0)2772 505-0
Fax: +49(0)2772 505-2319
3
/h
Model No. SK fan-and-filter unit 3240.100 3240.600 3240.110 3240.124 3241.100 3241.600 3241.110 3241.124 Page
EMC version
Rated operating voltage V, Hz 230, 50/60 115, 50/60 24 (DC) 230, 50/60 115, 50/60 24 (DC)
Dimensions mm
W (B) x H 255 x 255
D (T1) 25
Max. installation depth mm D (T2) 107
3
/h 180 m
3
/h 230/250 m
3
/h 230 m
3
/h
1 x SK 3240.200: 138/115 m
3
/h
2 x SK 3240.200: 165/140 m
3
/h
1 x SK 3243.200: 165/140 m
3
/h
1 x SK 3240.200: 183/195 m
3
/h
2 x SK 3240.200: 203/230 m
3
/h
1 x SK 3243.200: 203/230 m
3
/h
Diagonal fan Self-starting shaded pole motor DC motor Self-starting shaded pole motor DC motor
Rated current
0.21 A/
0.19 A
0.42 A/
0.38 A
0.43 A
0.26 A/
0.24 A
0.52 A/
0.48 A
0.78 A
Power consumption 35 W/34 W 11 W 40 W/42 W 19 W
Pre-fuse 2 A 4 A 2 A 4 A 2 A
Noise level 51/46 dB (A) 51 dB (A) 54/56 dB (A) 54 dB (A)
Protection category
Standard IP 54 IP 54 IP 54 IP 54 IP 54 IP 54 IP 54 IP 54
With additional fine filter mat or hose-proof hood IP 55 IP 55 IP 55 IP 55 IP 55 IP 55 IP 55 IP 55
With hose-proof hood IP 56 IP 56 IP 56 IP 56 IP 56 IP 56 IP 56 IP 56
SK outlet filter 1 3240.200 3240.200 3240.200 3240.200 3240.200 3240.200 303
Spare filter mats 5 3172.100 3240.066 3172.100 3172.100 3172.100 3240.066 3172.100 3172.100 301
Fine filter mats 5 3182.100 3182.100 3182.100 3182.100 3182.100 3182.100 3182.100 3182.100 302
Hose-proof hood 1 3240.080 3240.080 3240.080 3240.080 3240.080 3240.080 3240.080 3240.080 303
Blanking cover 1 3240.020 3240.020 3240.020 3240.020 3240.020 3240.020 3240.020 3240.020 303
Enclosure internal thermostat 1 3110.000 3110.000 3110.000 3110.000 3110.000 3110.000 3110.000 3110.000 294
Digital temperature display/thermo-
stat
1 3114.200 3114.200 3114.200 3114.200 3114.200 3114.200 3114.200 3114.200 293
Hygrostat 1 3118.000 3118.000 3118.000 3118.000 3118.000 3118.000 3118.000 3118.000 294
Speed control 1 3120.200 3120.200 3120.200 3120.200 3120.200 3120.200 295
Rittal Netherlands
RITTAL bv
Hengelder 56 Postbus 246
6900 AE Zevenaar
Phone: +31 (0) 316 59 16 60
Fax: +31 (0) 316 52 51 45
E-mail: [email protected] www.rittal.nl
3
/h
Model No. SK fan-and-filter unit 3243.100 3243.600 3243.110 3244.100 3244.600 3244.110 3244.140 Page
EMC version
Rated operating voltage V, Hz 230, 50/60 115, 50/60 230, 50/60 115, 50/60
400/460, 3~,
50/60
Dimensions mm
W (B) x H 323 x 323
D (T1) 25
Max. installation depth mm D (T2) 118.5 130.5
3
/h 700/770 m
3
/h
1 x SK 3243.200: 440/490 m
3
/h
2 x SK 3243.200: 510/560 m
3
/h
1 x SK 3243.200: 544/610 m
3
/h
2 x SK 3243.200: 630/690 m
3
/h
Diagonal fan 1~ capacitor motor
Rotary
current motor
Rated current 0.37 A/0.39 A 0.78 A/0.80 A 0.43 A/0.60 A 0.9 A/1.25 A 0.17 A/0.21 A
Power consumption 70 W/87 W 75 W/90 W 95 W/135 W 100 W/145 W 93 W/140 W
Pre-fuse 4 A 6 A 4 A 6 A
Motor circuit-
breaker
Noise level 59/61 dB (A) 65/66 dB (A)
Protection category
Standard IP 54 IP 54 IP 54 IP 54 IP 54 IP 54 IP 54
With additional fine filter mat or hose-proof hood IP 55 IP 55 IP 55 IP 55 IP 55 IP 55 IP 55
With hose-proof hood IP 56 IP 56 IP 56 IP 56 IP 56 IP 56 IP 56
SK outlet filter 1 3243.200 3243.200 3243.200 3243.200 3243.200 303
Spare filter mats 5 3173.100 3243.066 3173.100 3173.100 3243.066 3173.100 3173.100 301
Fine filter mats 5 3183.100 3183.100 3183.100 3183.100 3183.100 3183.100 3183.100 302
Hose-proof hood 1 3243.080 3243.080 3243.080 3243.080 3243.080 3243.080 3243.080 303
Blanking cover 1 3243.020 3243.020 3243.020 3243.020 3243.020 3243.020 3243.020 303
Enclosure internal thermostat 1 3110.000 3110.000 3110.000 3110.000 3110.000 3110.000 3110.000 294
Digital temperature display/
thermostat
1 3114.200 3114.200 3114.200 3114.200 3114.200 3114.200 3114.200 293
Hygrostat 1 3118.000 3118.000 3118.000 3118.000 3118.000 3118.000 3118.000 294
Speed control 1 3120.200 3120.200 3120.200 3120.200 3120.200 3120.200 3120.200 295
Rittal India
RITTAL India Pvt. Ltd.
Nos. 23 & 24, KIADB Industrial Area
Veerapura Doddaballapur-561 203
Bengaluru Dist
Phone: +91 80 2289 0700
Fax: +91 80 2762 3343
www.rittal-india.com
Air throughput 900 m
3
/h, with EC technology
Conversion table old/new
Model No. SK fan-and-filter unit 3245.500
1)
3245.600
1)
3245.510
1)
Page
EMC version
Rated operating voltage V, Hz 230, 50/60 115, 50/60
Dimensions mm
W (B) x H 323 x 323
D (T1) 25
Max. installation depth mm D (T2) 130,5
Air throughput, unimpeded air flow 900 m
3
/h
1 x SK 3243.200: 680 m
3
/h
2 x SK 3243.200: 820 m
3
/h
1 x SK 3243.060: 680 m
3
/h
2 x SK 3243.060: 820 m
3
/h
1 x SK 3243.200: 680 m
3
/h
2 x SK 3243.200: 820 m
3
/h
Diagonal fan EC motor
Rated current 1.25 A 2.5 A
Power consumption 170 W
Pre-fuse 4 A 6 A
Noise level 72 dB (A)
Protection category
Standard IP 51 IP 51 IP 51
With additional fine filter mat IP 52 IP 52 IP 52
With hose-proof hood IP 56 IP 56 IP 56
SK outlet filter 1 3243.200 3243.200 303
SK outlet filter EMC 1 3243.060 303
Spare filter mats 5 3173.100 3243.066 3173.100 301
Fine filter mats 5 3183.100 3183.100 3183.100 302
Hose-proof hood 1 3245.080 3245.080 3245.080 303
Blanking cover 1 3243.020 3243.020 3243.020 303
Enclosure internal thermostat 1 3110.000 3110.000 3110.000 294
Digital temperature display/thermostat 1 3114.200 3114.200 3114.200 293
Hygrostat 1 3118.000 3118.000 3118.000 294
Speed control and monitoring
for EC fan-and-filter units
1 3235.440
2)
3235.440
2)
3235.440
2)
294
1)
0 10 V input and tacho signal output
2)
On request.
Output class 20/25 m
3
/h 55/66 m
3
/h 105/120 m
3
/h 180/160 m
3
/h 230/250 m
3
/h 550/600 m
3
/h 700/770 m
3
/h
Cut-out dimensions (old = new) 92 x 92 124 x 124 177 x 177 224 x 224 292 x 292
24 V
new 3237.124 3238.124 3239.124 3240.124 3241.124
old 3321.027 3322.027 3323.027 3324.027 3325.027
230 V
new 3237.100 3238.100 3239.100 3240.100 3241.100 3243.100 3244.100
old 3321.107 3322.107 3323.107 3324.107 3325.107 3326.107 3327.107
115 V
new 3237.110 3238.110 3239.110 3240.110 3241.110 3243.110 3244.110
old 3321.117 3322.117 3323.117 3324.117 3325.117 3326.117 3327.117
400 V
new 3244.140
old 3327.147
EMC fan-and-filter unit, 230 V
new 3237.600 3238.600 3239.600 3240.600 3241.600 3243.600 3244.600
old 3321.607 3322.607 3323.607 3324.607 3325.607 3326.607 3327.607
Outlet filter
new 3237.200 3238.200 3239.200 3240.200 3243.200
old 3321.207 3322.207 3323.207 3325.207 3326.207
EMC outlet filter
new 3237.060 3238.060 3239.060 3240.060 3243.060
old 3321.267 3322.267 3323.267 3325.267 3326.267
Hose-proof hood
new 3237.080 3238.080 3239.080 3240.080 3243.080
old 3321.800 3322.800 3323.800 3324.800 3326.800
Blanking cover
new 3237.020 3238.020 3239.020 3240.020 3243.020
old
Standard filter mat (IP 54)
new 3321.700 3322.700 3171.100 3172.100 3173.100
old 3321.700 3322.700 3171.100 3172.100 3173.100 3327.700
Fine filter mat (IP 55)
new 3238.055 3181.100 3182.100 3183.100
old 3181.100 3182.100 3183.100
Rack-mounted fans/tangential fans for 482.6 mm (19)
Supply includes:
Fully wired unit ready for
connection
Clamping strip and assembly
parts (for rack-mounted fan/
Vario rack-mounted fan)
Filter mat
(for tangential fan)
Guide frame supply includes:
Guide frame
Connector and fitted connec-
tion cable (3 m)
Mounting bracket for optional
attachment to the 482.6 mm
(19) system
Assembly parts
Also required:
Order a guide frame according
to the application (only for
Vario rack-mounted fan)
Approvals:
Detailed drawing:
1
6
3
1
7
8
8
4
8
2
.6
(1
9
)
3
8
0
4
8
2
.6
(1
9
)
1
8
0
2
0
0
7
3
4
1
0
1
0
0
1

H
E
HE = U
Rack-mounted fan, air throughput 320/480 m
3
/h
Model No. SK 3340.024
1)
3340.115
1)
3340.230 3341.024
1)
3341.115 3341.230 Page
2 fans, distance between axes 85 mm
Rated operating voltage V, Hz 24 (DC) 115 (AC), 50/60 230 (AC), 50/60 24 (DC) 115 (AC), 50/60 230 (AC), 50/60
Dimensions mm W x H x D 482.6 (19) x 44 (1 U) x 200
3
/h 480 m
3
/h
Rated current max. 0.49 A 0.46 A/0.46 A 0.24 A/0.22 A 0.74 A 0.69 A/0.69 A 0.36 A/0.33 A
Pre-fuse T 6.0 A
Noise level 51 dB (A) 52 dB (A) 51 dB (A) 52 dB (A) 51 dB (A)
Accessories
Digital temperature display/thermostat 3114.200 3114.200 3114.200 3114.200 3114.200 3114.200 293
Enclosure internal thermostat 3110.000 3110.000 3110.000 3110.000 3110.000 3110.000 294
Speed control 3120.200 3120.200 3120.200 3120.200 295
1)
3342.115
1)
3342.230 3342.500
2)3)
Page
Rated operating voltage V, Hz 24 (DC) 115 (AC), 50/60 230 (AC), 50/60 24 (DC) 115 230 (AC)
3
/h
Rated current max. 0.74 A 0.69 A/0.69 A 0.36 A/0.33 A 0.85 A
Pre-fuse T 6.0 A
Noise level 51 dB (A) 52 dB (A) 51 dB (A)
Accessories
Digital temperature display/thermostat 3114.200 3114.200 3114.200 3114.200 293
Enclosure internal thermostat 3110.000 3110.000 3110.000 3110.000 294
Speed control 3120.200 3120.200 295
1)
2)
Rack-mounted fan for metric mounting angles available on request.
3)
Version with monitoring.
Rack-mounted fans/tangential fans for 482.6 mm (19)
Vario rack-mounted fan, air throughput 320/480 m
3
/h
Tangential fans, air throughput 320 m
3
/h
1)
3350.115
1)
3350.230 3351.024
1)
3351.115 3351.230 Page
Rated operating voltage V, Hz 24 (DC) 115 (AC), 50/60 230 (AC), 50/60 24 (DC) 115 (AC), 50/60 230 (AC), 50/60
3
/h 480 m
3
/h
Rated current max. 0.49 A 0.46 A/0.46 A 0.24 A/0.22 A 0.74 A 0.69 A/0.69 A 0.36 A/0.33 A
Pre-fuse T 6.0 A
Noise level 51 dB (A) 52 dB (A) 51 dB (A) 52 dB (A) 51 dB (A)
Accessories
Guide frame 3356.100 3355.100 3355.100 3356.100 3355.100 3355.100
Digital temperature display/thermostat 3114.200 3114.200 3114.200 3114.200 3114.200 3114.200 293
Enclosure internal thermostat 3110.000 3110.000 3110.000 3110.000 3110.000 3110.000 294
Speed control 3120.200 3120.200 3120.200 3120.200 295
1)
3352.115
1)
3352.230 3352.500
1)2)
Page
Rated operating voltage V, Hz 24 (DC) 115 (AC), 50/60 230 (AC), 50/60 24 (DC), 115 230 (AC)
3
/h
Rated current max. 0.74 A 0.69 A/0.69 A 0.36 A/0.33 A 0.85 A
Pre-fuse T 6.0 A
Noise level 51 dB (A) 52 dB (A) 51 dB (A)
Accessories
Guide frame 3356.100 3355.100 3355.100 3357.100
1)

Speed control 3120.200 3120.200 3120.200 295
1)
2)
Version with monitoring
Model No. SK 3145.000 3144.000 Page
3
/h
Rated current max. 0.32 A 0.16 A
Power 37 W
Speed 2245 min
1

Maximum static pressure difference 65 70 Pa
Accessories
Packs
of
Digital temperature display/
thermostat
1 3114.200 3114.200 293
Filter mats 5 3177.000 3177.000 299
Front outlet grille 2 U 1 3176.000 3176.000 304
Roof vent 1 3148.007 3148.007 220
Speed control 1 3120.200 3120.200 295
Fan systems
T
B
2
9
0
5
0
0
3
7
0
5
5
0
1
2
5
RTT roof-mounted fan and
vent attachment
for TS
The active roof-mounted fan and the passive vent
attachment (TS 8801.380) integrate perfectly into
the system-wide mounting concept of the Rittal
TopTherm platform. They fit precisely onto the
cut-outs of the small and medium performance
category of TopTherm roof-mounted cooling units.
Of course, they may also be mounted on any
sufficiently large roof surface.
TS roof plates with prepared mounting cut-outs
are additionally available.
Roof-mounted fan supply includes:
Unit ready for connection with built-in radial fan
Sealing and assembly parts
Vent attachment TS:
see page 296.
IP 43 to IEC 60 529
Detailed drawings:
3
/h
3
/h
Model No. SK 3149.410 3149.420 3149.440 Page
400, 3~, 50/60
460, 3~, 60
3
/h
Required mounting cut-out W (B) x D (T) mm 475 x 260
Power consumption of fan 120 W/170 W 95 W/140 W
Rated current of fan 1.1/1.6 A 0.5/0.88 A 0.35/0.35 A
Noise level 68/69 dB (A)
Weight 10 kg
Colour RAL 7035
Accessories
Roof plate 800 x 600 mm for TS 8 with cut-out 8801.320 8801.320 8801.320 296
Roof plate 1200 x 600 mm for TS 8 with cut-out 296
Digital temperature display/thermostat 3114.200 3114.200 293
Speed control 3120.200 3120.200 295
Model No. SK 3149.810 3149.820 3149.840 8801.380 Page
400, 3~, 50/60
460, 3~, 60
Vent
attachment
3
/h
Without
motor
Required mounting cut-out W (B) x D (T) mm 475 x 260 490 x 390
Power consumption of fan 170 W/225 W 180 W/310 W
Rated current of fan 1.5/2.2 A 0.75/1.1 A 0.35/0.55 A
Noise level 69/70 dB (A)
Weight 11 kg 6 kg
Colour RAL 7035
Accessories
Roof plate 600 x 600 mm for TS 8 with cut-out 8801.300 8801.300 8801.300 8801.310 296
Roof plate 800 x 600 mm for TS 8 with cut-out 8801.320 8801.320 8801.320 8801.330 296
Roof plate 1200 x 600 mm for TS 8 with cut-out 8801.350 296
Digital temperature display/thermostat 3114.200 3114.200 293
Speed control 3120.200 3120.200 295
Fan systems
5
0
2
6
5
3
4
5
3
4
0
4
2
0
Roof-mounted fan,
roof vent
The roof-mounted fan is easily installed using
6 screws. The sealing tape supplied can be
used to seal it against the enclosure.
The assembly screws are invisible from the
outside.
The roof-mounted fan casing has a large air
outlet surface and labyrinth air ducting.
IP 43 to IEC 60 529. Via additional installation
of the filter holder with filter mat SK 3175.000,
a protection category of IP 44 is achieved with
roof vent SK 3148.007.
Supply includes:
Unit ready for connection with built-in radial fan
Sealing and assembly parts
Connection cable (3 m)
Drilling template
Accessories:
Filter holder, see page 304.
Detailed drawings:
Model No. SK 3149.007 3169.007 3148.007
Rated operating voltage V, Hz 230, 50/60 115, 50/60 Without fan motor
3
/h
Rated current max. 0.2 A 0.55 A
Power consumption 42 W 65 W
Weight 7.8 kg
Colour RAL 7035, textured enamel
T
H
B
5
1
1 5
1
1
4
1
0
4
5
0
4
5
0
4
1
0
H
1
3
.
5
T B
Roof-mounted fan
for TS in the office sector
This new roof ventilation concept offers a wealth
of performance, assembly and cost benefits asso-
ciated with the use of integrated ventilation sys-
tems. This roof-mounted fan may be ordered with
and without a roof plate. Another outstanding fea-
ture is the enormous volumetric flow in proportion
to exceptionally low noise levels, making it ideal
for use in sensitive office areas.
Fitted onto a roof plate based on TS.
Easy assembly; mounting cut-outs have been
provided.
Radial fan.
Supply includes:
Fully wired ready for connection
Assembly parts.
Detailed drawings:
Model No. SK 3164.610 3164.620 3164.115 3164.230 Page
Rated operating voltage V, Hz 115, 50/60 230, 50/60 115, 50/60 230, 50/60
3
/h
1)

Design with roof plate without roof plate
Dimensions mm
W (B)
H
D (T)
800
240
800
511
227
511
Power consumption 68 W/81 W
Rated current 0.6 A/0.7 A 0.3 A/0.35 A 0.6 A/0.7 A 0.3 A/0.35 A
Operating temperature range +20C to +55C
Colour RAL 7035
Accessories
Temperature indicator in 1 U patch panel 7109.035 7109.035 7109.035 7109.035 293
1)
800 m
3
/h at 40 Pa counterpressure using two integrated louvres, type DK 7825.801, in the enclosure base/plinth.
Fan systems
Enclosure internal fan
for TS
To prevent hot-spots and support the air routing
of active enclosure climate control components.
Adjustable in two axes. Attached to the TS 8
frame section. Several fans may be cascaded
using the quick-release clamping strip.
Supply includes:
Complete unit with radial fan ready
for connection
Snap-on pivot device
Assembly parts
Detailed drawings:
Air
through-
put (un-
impeded
air flow)
Power
consump-
tion
W
Rated
current
A
Rated
voltage
V, Hz
Model No.
SK
160 m
3
/h 19.0/18.0 0.12/0.11 230, 50/60 3108.100
160 m
3
/h 19.0/18.0 0.24/0.23 115, 50/60 3108.115
160 m
3
/h 3.5 0.15 24 V (DC) 3108.024
Fan mounting plate
for TS
The fan mounting plate may be retro-fitted in all
TS 8 network enclosures from above. The plate is
mounted at the front of the enclosure, whilst the
rear section is left free for cable entry. A rubber
cable clamp strip is supplied loose for optional
sealing at the rear.
The following combinations are also possible:
Solid roof plate raised with 20 or 50 mm roof
spacers.
Roof plate for cable entry raised with 20 or
50 mm roof spacers.
Vented roof plate for cable entry.
In conjunction with the large swing frame,
usage is only possible from an enclosure depth
of 800 mm, in conjunction with a roof plate for
cable entry from 1000 mm.
Note:
Not suitable for crane transportation
Not suitable for combination with 482.6 mm (19)
mounting frame
Technical specifications for one fan:
Rated operating voltage: 230 V
Power consumption: 15/14 W at 50/60 Hz
Air throughput (unimpeded air flow):
160/180 m
3
/h, 50/60 Hz
Operating temperature range: 10C to +55C
Technical specifications of thermostat:
Operating temperature range: +5C to +55C
Colour:
RAL 7035
Supply includes:
2 fans
2/4 cut-outs to extend to 4/6 fans
Thermostat
Foam rubber cable clamp strip
Thermostat and fan fully wired to connection
cable (3.5 m).
The air throughput can be increased with the fan
expansion kit DK 7980.000.
Accessories:
Fan extension kit,
see page 222.
Self-adhesive foam cable clamp strip
SZ 2573.000 for sealing at the sides and
targeted air routing when bayed,
see page 513.
For enclosures
Number
of fans
Max.
number
of fans
Model No.
DK
Width
mm
Depth
mm
600 600 2 4 7966.035
600
800
1000
1200
2 6 7968.035
800 600 2 6 7986.035
800
800
1000
1200
2 6 7988.035
3
8
5
/5
8
5
5
2
5
/7
2
5
4
0
Fan systems
Mini-fan
Compact DC fan for enclosure and component
cooling in enclosures.
Rated operating voltage: 24 V (DC)
Power consumption: 1 W
Air throughput (unimpeded air flow): 21 m
3
/h
Noise level (unimpeded air flow): 20 dB (A)
Supply includes:
Fans
Assembly screws
Contact hazard protection
Dimensions
W x H x D mm
Packs of Model No. SK
60 x 60 x 25.4 1 3236.124
Fan expansion kit
For retro-fitting various fan units or to supplement
the fan mounting plate and modular fan roof.
Technical specifications DK 7980.000:
Rated operating voltage: 230 V~
160/180 m
3
/h, 50/60 Hz
Rated operating voltage: 230 V~
108/120 m
3
/h, 50/60 Hz
Power consumption: 7.7 W
3
/h
Supply includes:
Fans
Assembly parts
Connection cable (0.61 m)
Dimensions
W x H x D mm
119 x 119 x 38 1 set 7980.000
119 x 119 x 25 1 set 7980.100
119 x 119 x 38 1 set 7980.148
Cover plates for fan panels
for FlatBox
To cover unused fan panels when using fans in
the FlatBox.
Material:
Sheet steel
Surface finish:
Powder-coated
Colour:
RAL 7035
Supply includes:
Assembly parts.
6 7507.760
Fan systems
1
2 3
4
Fan roof, modular, two-piece
for TS
The modular roof plate consists of individual
components and can be configured for enclosure
ventilation in various ways.
The modules:
Roof plate, two-piece with cut-out
For fan mounting and cable entry at the rear via
a sliding angular bracket with rubber cable clamp
strip. Replaces the existing roof plate. The two-
piece design allows convenient retrofitting of
cables at any time.
Cover plate
To cover the cut-out, optionally solid or vented
options. The top-mounted cover plate may be
raised for extra air throughput using the supplied
spacers.
Fan insert
For active ventilation:
A fully pre-wired fan tray including 2.5 m connec-
tion cable, with two fan motors and additional
cut-outs. The air throughput may be increased
with a fan expansion kit.
Material:
Sheet steel
Surface finish:
Spray-finished
Colour:
RAL 7035
160/180 m
3
/h at 50/60 Hz
Temperature range: 10C to +55C
Detailed drawing:
Accessories:
Fan expansion kit DK 7980.000,
see page 222.
Enclosure internal thermostat SK 3110.000,
see page 294.
Speed control SK 3120.200,
see page 295.
Roof plate TS with cut-out Fan insert
For enclosures
Model No.
DK
For enclosures
Model No.
DK
Fan insert
Width
mm
Depth
mm
Width
mm
Depth
mm
Fans
pre-wired
Maximum
no. of fans
600 600 7826.366 600 600 2102.320 2 2
600 800 7826.368 600 800 2102.490 2 6
600 1000 7826.360 600 1000 2102.490 2 6
800 600 7826.486 800 600 7885.000 2 3
800 800 7826.488 800 800 7886.000 2 8
800 1000 7826.480 800 1000 7886.000 2 8
Roof plate, solid Roof plate, vented
For enclosures
Model No.
DK
For enclosures
Model No.
DK
Width
mm
Depth
mm
Width
mm
Depth
mm
600 600 2102.180
1)
600 600 2102.400
600 800 2102.190
1)
600 800 2102.410
600 1000 2102.190
1)
600 1000 2102.410
800 600 7885.100 800 600 7885.200
800 800 7886.100 800 800 7886.200
800 1000 7886.100 800 1000 7886.200
1)
1 2
3 4
Fan systems
Fan unit, active
for TE
For active ventilation of the TE 7000. The fan
unit is installed in the prepunched cut-out.
An additional fan may optionally be integrated.
Supply includes:
Fan unit
Assembly parts
2 fans
1 thermostat
Open connection cable
Fan extension kit, DK 7980.000,
see page 222.
Technical specifications of thermostat:
Temperature range: +5C to +55C
Note:
Connection via distributor box or
country-specific connector.
Accessories:
Fan expansion kit,
see page 222.
For enclosures
W x D
mm
Number
of pre-wired
fans
Possible
number
of fans
Model No.
TE
All sizes 2 3 7000.670
Active kit
for TE
consisting of fan unit including thermostat,
complete, wired ready for connection, socket strip
(DK 7000.630) for up to 8 earthing pin plugs,
version D and connection cable (DK 7200.210).
1 set 7000.680
Fan mounting plate DC
for TS
Exceptionally low-noise thanks to FCS
speed control, fully fitted
Suitable for TS 8 enclosures with a raised roof
(> 20 mm) or TS 8 roof plate, vented. The fan
mounting plate may be used as an alternative to
fan mounting plate 7988.035. It is installed from
above. Cable entry is prepared in the rear section
of the plate.
Not suitable for combination with 482.6 mm (19)
mounting frame.
Advantages of the DC fan mounting plate with
FCS technology:
Exceptionally low-noise thanks to speed con-
trol.
All fans are individually monitored for failure.
High air throughput thanks to DC technology
(unimpeded air flow 6 x 175 m
3
/h = 1050 m
3
/h).
EMC compatibility.
Temperature monitoring and control.
High level of safety (low safety voltage with
24 V DC power supply).
Visual and acoustic alarm messages, plus relay
alarm output.
Freely selectable installation location for the
FCS control unit (included with the supply of
the fan mounting plate, in 482.6 mm (19) with
7320.440).
Suitable for international use, thanks to wide-
range power supply 100 240 V AC and socket
to IEC 320.
Pre-configured.
Network-compatible via CMC-TC (all relevant
data such as temperature etc. is displayed in
the web browser, or alarms are sent in the form
of an SNMP trap).
Rated voltage of power supply:
100 240 V AC, 50/60 Hz
Power pack rated current: max. 1.5 A
Secondary range of power supply:
24 V DC, 3 A
Total air throughput (unimpeded air flow):
6 x 175 m
3
/h = 1050 m
3
/h
Rated voltage: 24 V DC
Rated current: max. 0.3 A
3
/h
Speed: 2650 rpm
Noise level: up to 45 dB (A) at maximum speed
activation
Also required:
Connection cable 230/115 V.
Example D version, Model No. DK 7200.210,
see page 585.
Accessories:
1 U mounting unit, Model No. DK 7320.440,
see page 586.
Note:
For more information on the Fan Control System
(FCS) system, see page 587.
For
enclosures
width
mm
For
enclosures
depth
mm
Number of
DC fans
Model No.
DK
800
800
900
1000
6 7858.488
Fan systems
B
T
H
Door-mounted fan
for server enclosures TS, TE
Specifically for installing in perforated doors.
Given the growing packaging density in data
communications and network enclosures, active,
direct ventilation of the enclosure is essential.
The door-mounted fan, which is attached to the
rear or front door, supports horizontal air routing
via the servers and therefore facilitates faster heat
dissipation from active components.
Standard assembly with two fans.
3
/h.
By adding two fan expansion kits, the air
throughput is increased to 1200 m
3
/h.
The direction of air flow is easily reversed by
rotating the fan.
Several units may be positioned in a cascade
arrangement.
Simple mounting on the tubular door frame.
Supply includes:
Fully wired ready for connection
Connection cable 2.5 m
Assembly parts
Accessories:
Fan expansion kit,
see page 225.
Note:
Only for mounting on the tubular door frame!
Door configuration for installation in 2 and
4-door ISP racks available on request.
Detailed drawings:
For doors with width 600 mm
For doors with width 800 mm
1)
3165.648
1)
3165.615
1)
3165.630
1)
Page
Rated operating voltage V, Hz 24 (DC) 48 (DC) 115, 50/60 230, 50/60
Air throughput (unimpeded air flow) 600 m
3
/h
Power consumption for two fans 40 W 48 W 70 W/64 W 70 W/70 W
Rated current of fan 1.5 A 1.0 A 0.76 A/0.72 A 0.38 A/0.36 A
Dimensions mm
W (B)
H
D (T)
493
606
64,5
Temperature range +20C to +55C
Colour RAL 7035
Accessories
1)
3165.848
1)
3165.815
1)
3165.830
1)
Page
Rated operating voltage V, Hz 24 (DC) 48 (DC) 115, 50/60 230, 50/60
Air throughput (unimpeded air flow) 600 m
3
/h
Power consumption for two fans 40 W 48 W 70 W/64 W 70 W/70 W
Rated current of fan 1.5 A 1.0 A 0.76 A/0.72 A 0.38 A/0.36 A
Dimensions mm
W (B)
H
D (T)
693
606
64,5
For doors with width (mm) 800
Temperature range +20C to +55C
Colour RAL 7035
Accessories
1)
Delivery times on request.
Fan expansion kit
for door-mounted fan
To increase the air throughput of the door-
mounted fan.
To fit door-mounted fan Model No. SK
SK 3165.624, SK 3165.824 3165.024
SK 3165.648, SK 3165.848 3165.048
SK 3165.615, SK 3165.815 3165.115
SK 3165.630, SK 3165.830 3165.230
Colour:
RAL 7035
Internal circuit IP 54
to IEC 60 529
Supply includes:
Complete unit ready for connec-
tion.
Note:
For precise temperature
control inside the enclosure,
we recommend the digital tem-
perature indicator/thermostat
SK 3114.200, the enclosure
internal thermostat SK 3110.000
or the speed control
SK 3120.200.
Approvals:
Detailed drawing:
Wall-mounted
Model No. SK 3125.800 3129.800 Page
Rated operating voltage V, Hz 230, 1~, 50/60
Dimensions mm
W
H
D
200
400
146
400
1360
110
Specific thermal output 12 W/K 62 W/K
Max. rated current per fan 0.11 A/0.13 A 0.45 A/0.55 A
Pre-fuse T 2.0 A
Output per fan 25 W/30 W 100 W/130 W
Air throughput of fans (unimpeded air flow)
External circuit 265 m
3
/h / 315 m
3
/h 860 m
3
/h / 900 m
3
/h
Internal circuit 265 m
3
/h / 315 m
3
/h 860 m
3
/h / 900 m
3
/h
Type of connection Connection cable
Weight 8 kg 30 kg
Digital temperature display/thermostat 1 3114.200 3114.200 293
Speed control 1 3120.200 3120.200 295
Colour:
RAL 7035
to IEC 60 529
Supply includes:
Complete unit ready for
connection
Plug-in terminal strip
With controller and digital
temperature display
Floating fault signal contact
in case of overtemperature
Approvals:
Detailed drawing:
Wall-mounted with controller, 17.5 45 W/K
Wall-mounted with controller, 60 90 W/K
Model No. SK 3126.100 3126.115 3127.100 3127.115 3128.100 3128.115 Page
Rated operating voltage V, Hz 230, 1~, 50/60 115, 1~, 50/60 230, 1~, 50/60 115, 1~, 50/60 230, 1~, 50/60 115, 1~, 50/60
Dimensions mm W x H x D 280 x 550 x 150 400 x 950 x 205
Specific thermal output 17.5 W/K 30 W/K 45 W/K
Max. rated current per fan 0.11 A/0.13 A 0.23 A/0.25 A 0.28 A/0.34 A 0.55 A/0.7 A 0.3 A/0.4 A 0.6 A/0.8 A
Pre-fuse T 2.0 A
Output per fan 23 W/27 W 60 W/75 W 70 W/90 W
Air throughput of fans
(unimpeded air flow)
3
/h / 315 m
3
/h 480 m
3
/h / 525 m
3
/h 600 m
3
/h / 625 m
3
/h
3
/h / 315 m
3
/h 480 m
3
/h / 525 m
3
/h 600 m
3
/h / 625 m
3
/h
Weight 10 kg 18 kg 19 kg
Filter mats 3 3286.300 3286.300 3286.400 3286.400 3286.400 3286.400 299
Metal filters 1 3286.310 3286.310 3286.410 3286.410 3286.410 3286.410 300
Model No. SK 3129.100 3129.115 3130.100 3130.115 Page
Rated operating voltage V, Hz 230, 1~, 50/60 115, 1~, 50/60 230, 1~, 50/60 115, 1~, 50/60
Max. rated current per fan 0.38 A/0.4 A 0.65 A/0.8 A 0.67 A/0.88 A 1.3 A/1.8 A
Pre-fuse T 2.0 A 4.0 A
Output per fan 85 W/90 W 150 W/200 W
3
/h / 900 m
3
/h 850 m
3
/h / 945 m
3
/h
3
/h / 900 m
3
/h 850 m
3
/h / 945 m
3
/h
Weight 21 kg 34 kg
Filter mats 3 3286.400 3286.400 3286.400 3286.400 299
Metal filters 1 3286.410 3286.410 3286.410 3286.410 300
Wall-mounted, railway-compatible version
Model No. SK 3126.424 3128.424 3129.424 3130.424 3126.410 3128.410 3129.410 3130.410 Page
Rated operating voltage 24 V (DC) 24 V (DC) 24 V (DC) 24 V (DC) 110 V (DC) 110 V (DC) 110 V (DC) 110 V (DC)
Dimensions mm
W
H
D
280
650
127
400
950
140
400
950
150
400
1580
150
280
650
127
400
950
140
400
950
150
400
1580
150
Specific thermal output 27 W/K 47 W/K 66 W/K 98 W/K 27 W/K 47 W/K 66 W/K 98 W/K
Max. rated current per fan 2.7 A 7.5 A 10.5 A 9.2 A 2.7 A 1.9 A 2.47 A 2.3 A
Output per fan 65 W 180 W 240 W 220 W 65 W 203 W 256 W 230 W
3
/h 560 m
3
/h 1055 m
3
/h 1125 m
3
/h 360 m
3
/h 560 m
3
/h 1055 m
3
/h 1125 m
3
/h
3
/h 560 m
3
/h 1055 m
3
/h 1125 m
3
/h 360 m
3
/h 560 m
3
/h 1055 m
3
/h 1125 m
3
/h
Weight 10 kg 16 kg 18 kg 25 kg 12.5 kg 18.5 kg 205 kg 27.5 kg
Adjustable frame 1 3286.260 3286.270 3286.270 3286.280 3286.260 3286.270 3286.270 3286.280 297
Metal filters 1 3286.230 3286.240 3286.240 3286.250 3286.230 3286.240 3286.240 3286.250 300
Extended delivery times. We reserve the right to make technical modifications.
Rittal air/air heat exchangers in
a railway-compatible version are
used specifically in the mobile
railway engineering sector, e.g.
for local trains, locomotives and
high-speed trains.
Products are available both in
24 V DC and in 110 V DC.
Railway-compatible design of
the units means construction
to EN 50 155, halogen-free
connection cables, screw pro-
tection, shock and vibration test-
ing to EN 61 373, preparation for
EN 45 545, and spray-finishing
in RAL 7035 S to DB TL 918340,
among other things.
Benefits:
External and internal fans
may be controlled separately
Simple maintenance
Colour:
RAL 7035
Internal circuit IP 54 to
IEC 60 529
Supply includes:
Complete unit ready
for connection.
Detailed drawings:
Rittal Israel
RITTAL Enclosure Systems Ltd.
13, Hatarshish St. Zone 29 P.O. Box 3597
Industrial Park, Caesarea 38900
Phone: +972 (0) 4 6275 505
Fax: +972 (0) 4 6275 535
www.rittal.co.il
Roof-mounted
Model No. SK 3248.000 Page
Dimensions mm
W
H
D
595
362
440
Specific thermal output 66 W/K
Fans 2 per heat exchanger
Max. rated current per fan 0.45 A/0.55 A
Pre-fuse T 4.0 A
Output per fan 75 W
3
/h
3
/h
Type of connection Connection cable
Weight 168 kg
Digital temperature display/thermostat 1 3114.200 293
Enclosure internal thermostat 1 3110.000 294
Hygrostat 1 3118.000 294
Speed control 1 3120.200 295
Colour:
RAL 7035/9005
Internal circuit IP 54 to
IEC 60 529
Supply includes:
Complete unit ready for
connection
The fans are connected via
two 3-wire connection cables,
with wire end ferrules.
Note:
we recommend the digital tem-
perature indicator/thermostat
SK 3114.200, the enclosure
internal thermostat SK 3110.000
or the speed control
SK 3120.200.
Detailed drawings:
230
231
Cooling units
Thermoelectric coolers
Thermoelectric coolers..................................................... 100 W..............232
Wall-mounted cooling units
TopTherm, horizontal format ............................................ 300 W..............233
TopTherm......................................................................... 300 W..............234
TopTherm Blue e ........................................................... 500 W..............235
TopTherm Blue e ........................................................... 750 W..............236
TopTherm Blue e ......................................................... 1000 W..............237
TopTherm Blue e ......................................................... 1500 W..............238
TopTherm Blue e ......................................................... 2000 W..............239
TopTherm Blue e ......................................................... 2500 W..............240
TopTherm Blue e ......................................................... 4000 W..............240
TopTherm Blue e, slimline ........................................... 1500 W..............241
TopTherm Blue e, design NEMA 4X............ 500/1000/1500 W..............242
TopTherm Blue e, design NEMA 4X................... 2000/2500 W..............243
TopTherm Blue e, Ex cooling units
for zone 22 (dust) ........................................... 500/1000/1500 W..............243
Roof-mounted cooling units
TopTherm Blue e ........................................................... 500 W..............244
TopTherm Blue e ........................................................... 750 W..............245
TopTherm Blue e ......................................................... 1000 W..............245
TopTherm Blue e ................................................ 1100/3000 W..............246
TopTherm Blue e ......................................................... 1500 W..............246
TopTherm Blue e ......................................................... 2000 W..............247
TopTherm Blue e ................................................ 3000/4000 W..............247
Modular climate control concept
Cooling modules Blue e ..................................... 1500/2500 W..............248
Section doors for installing cooling modules ............................................249
TopTherm cooling units
generation Blue e
Energy-saving range of cooling units in the
output range from 500 to 4000 W.
Savings of up to 45% energy consumption with the same cooling output
(ideally 70% compared with a conventional Rittal TopTherm Plus cooling
unit in field trials).
Further information can be found on the Internet at www.rittal.com under
System climate control.
Eco-Mode control
Intelligent, targeted use of energy thanks to the new eco-mode control from
Rittal.
Thermoelectric coolers
Climate control accessories Page 291 Therm software Page 341
External circuit IP 34
to IEC 60 529
to IEC 60 529
Supply includes:
Thermoelectric climate
control unit
Fully wired
ready for connection
Mounting accessories
Parameterization software.
Detailed drawing:
T
1 B
H
T
1 B
H
T
2
Useful cooling output 100 W/thermal output 100 W
Model No. SK 3201.200 3201.300 Page
Dimensions mm
W (B)
H
D (T1)
125
400
155
Installation depth mm D (T2) 100
Rated operating voltage V, Hz 100 230 V, 50/60 24 V DC
Start-up current 4.6 A 4.5 A
Rated current 0.7 A 4.5 A
Refrigeration factor/COP L 35 L 35 1.0 1.2
Useful cooling output
to DIN 3168
L 35 L 35 100 W 100 W
Thermal output 100 W 100 W
Power pack integrated
Colour of cover/unit RAL 7024/anodised aluminium
Weight 3.0 kg 2.4 kg
Operating temperature range 30C to +55C 30C to +60C
3
/h
Type of connection Plug-in spring connection terminal
Pre-fuse T 4 A 10 A
Auto Range power pack 240 W 1 3201.040 302
Spare filter mat 1 3201.050 3201.050 301
Master/slave adaptor 1 3201.070 3201.070 295
Condensate hose, 5 m length 1 3301.606 3301.606 303
We reserve the right to make technical modifications. Special voltages available on request.
QK
.
to IEC 60 529
to IEC 60 529
Supply includes:
Nano-coated condenser
Wired ready for connection
(plug-in terminal strip)
Drilling template
Assembly parts
Approvals:
Detailed drawing:
3
4
0
5
2
5
1
5
3
9
8
5
5
TopTherm, horizontal format, useful cooling output 300 W
Model No. SK 3302.300 3302.310 Page
Material Sheet steel
Colour RAL 7035
Rated operating voltage V, Hz 230, 1~, 50/60 115, 1~, 60
Dimensions mm W x H x D 525 x 340 x 153
to DIN 3168
L 35 L 35
L 35 L 50
300 W/320 W
150 W/160 W
300 W
150 W
Rated current max. 1.6 A/1.7 A 4.0 A
Start-up current 4.3 A/5.3 A 12.0 A
Power consumption Pel
to DIN 3168
L 35 L 35
L 35 L 50
285 W/300 W
320 W/340 W
290 W
340 W
Refrigeration factor = L 35 L 35 1.1
Refrigerant R134a, 100 g R134a, 95 g
Permissible operating pressure p. max. 25 bar
Setting range +30C to +55C
Weight 13 kg
3
/h
3
/h
Temperature control Basic controller
Condensate hose 1 3301.608 3301.608 303
Filter mats 3 3286.110 3286.110 299
Metal filters 1 3286.120 3286.120 300
Door-operated switch 1 4127.010 4127.010 496
QK
.
QK/Pel
.
TopTherm, useful cooling output 300 W
Model No. SK 3302.100 3302.110 3302.200
1)
3302.210
1)
Page
Material Sheet steel Stainless steel
Colour RAL 7035
Rated operating voltage V, Hz 230, 1~, 50/60 115, 1~, 60 230, 1~, 50/60 115, 1~, 60
Dimensions mm W (B) x H x D (T) 280 x 550 x 140
to DIN 3168
L 35 L 35
L 35 L 50
300 W/320 W
150 W/170 W
300 W
150 W
300 W/320 W
150 W/170 W
300 W
150 W
Rated current max. 1.6 A/1.7 A 3.3 A 1.6 A/1.7 A 3.3 A
Start-up current 3.0 A/3.4 A 8.0 A 3.0 A/3.4 A 8.0 A
Pre-fuse T 10.0 A 10.0 A 10.0 A 10.0 A
to DIN 3168
L 35 L 35
L 35 L 50
245 W/255 W
255 W/275 W
290 W
340 W
245 W/255 W
255 W/275 W
290 W
340 W
Refrigerant R134a, 100 g
Setting range +30C to +55C
Weight 13 kg
3
/h
3
/h
Temperature control Basic controller (factory setting +35C)
Filter mats 3 3286.300 3286.300 3286.300 3286.300 299
Metal filters 1 3286.310 3286.310 3286.310 3286.310 300
Door-operated switch 1 4127.010 4127.010 4127.010 4127.010 496
Digital temperature display/thermostat 1 3114.200 3114.200 3114.200 3114.200 293
Condensate hose 1 3301.608 3301.608 3301.608 3301.608 303
1)
QK
.
QK/Pel
.
to IEC 60 529
to IEC 60 529
Supply includes:
Drilling template
Assembly parts
Approvals:
Detailed drawing:
T
H
B
to IEC 60 529
to IEC 60 529
Supply includes:
Drilling template
Assembly parts
Approvals:
Detailed drawing:
T
H
B
TopTherm Blue e, useful cooling output 500 W
Model No. SK 3303.500 3303.510 3303.600
1)
3303.610
1)
Page
Colour RAL 7035
Rated operating voltage V, Hz 230, 1~, 50/60 115, 1~, 60 230, 1~, 50/60 115, 1~, 60
to DIN 3168
L 35 L 35
L 35 L 50
500 W/610 W
280 W/350 W
500 W
280 W
500 W/610 W
280 W/350 W
500 W
280 W
Rated current max. 2.6 A/2.6 A 5.7 A 2.6 A/2.6 A 5.7 A
Start-up current 5.1 A/6.4 A 11.5 A 5.1 A/6.4 A 11.5 A
Pre-fuse T 10.0 A 10.0 A 10.0 A 10.0 A
to DIN 3168
L 35 L 35
L 35 L 50
360 W/380 W
420 W/390 W
470 W
500 W
360 W/380 W
420 W/390 W
470 W
500 W
Operating temperature and setting range +20C to +55C
Weight 17 kg
3
/h
3
/h
Temperature control e-Comfort controller (factory setting +35C)
Filter mats 3 3286.300 3286.300 3286.300 3286.300 299
Metal filters 1 3286.310 3286.310 3286.310 3286.310 300
SK BUS system 1 3124.100 3124.100 3124.100 3124.100 295
RiDiag II 1 3159.100 3159.100 3159.100 3159.100 347
Interface board 1 3124.200 3124.200 3124.200 3124.200 295
Condensate hose 1 3301.610 3301.610 3301.610 3301.610 303
1)
QK
.
QK/Pel
.
Model No. SK 3361.500 3361.510 3361.540 3361.600
1)
3361.610
1)
3361.640
1)
Page
Colour RAL 7035
Rated operating voltage V, Hz
230, 1~,
50/60
3)

115, 1~,
60
3)

400
2)
, 2~,
50/60
3)

230, 1~,
50/60
3)

115, 1~,
60
2)

400
2)
, 2~,
50/60
3)

to DIN 3168
L 35 L 35
L 35 L 50
750 W/790 W
570 W/570 W
750 W
500 W
750 W/790 W
570 W/570 W
750 W/790 W
570 W/570 W
750 W
500 W
750 W/790 W
570 W/570 W
Rated current max. 2.7 A/2.7 A 5.3 A 1.2 A/1.4 A 2.7 A/2.7 A 5.3 A 1.2 A/1.4 A
Start-up current 6.0 A/9.6 A 12.0 A 3.1 A/3.3 A 6.0 A/9.6 A 12.0 A 3.1 A/3.3 A
Pre-fuse T 10.0 A 10.0 A 6.3 A 10.0 A
4)
10.0 A 10.0 A 6.3 A 10.0 A
4)

to DIN 3168
L 35 L 35
L 35 L 50
420 W/450 W
480 W/510 W
570 W
670 W
450 W/470 W
520 W/550 W
420 W/450 W
480 W/510 W
570 W
670 W
450 W/470 W
520 W/550 W
Refrigeration factor = L 35 L 35 1.8 1.3 1.7 1.8 1.3 1.7
Refrigerant R134a, 280 g R134a, 260 g R134a, 280 g R134a, 280 g R134a, 260 g R134a, 280 g
Weight 22 kg
3
/h
3
/h
Filter mats 3 3286.300 3286.300 3286.300 3286.300 3286.300 3286.300 299
Metal filters 1 3286.310 3286.310 3286.310 3286.310 3286.310 3286.310 300
Door-operated switch 1 4127.010 4127.010 4127.010 4127.010 4127.010 4127.010 496
SK BUS system 1 3124.100 3124.100 3124.100 3124.100 3124.100 3124.100 295
RiDiag II 1 3159.100 3159.100 3159.100 3159.100 3159.100 3159.100 347
Interface board 1 3124.200 3124.200 3124.200 3124.200 3124.200 3124.200 295
Condensate hose 1 3301.610 3301.610 3301.610 3301.610 3301.610 3301.610 303
1)
2)
External toroidal core transformer 126 x 65 mm deep for mounting in the enclosure.
3)
Tu max. = 53C/60 Hz.
4)
Transformer protection switch.
QK
.
QK/Pel
.
Rittal Canada
RITTAL Systems Ltd.
6485 Ordan Drive Missisauga ON L5T 1X2
Canada
Phone: +1 (905) 795-0777
Fax: +1 (905) 795-9548
Toll-free: 1-800-399-0748
E-mail: [email protected] www.rittal.ca
to IEC 60 529
to IEC 60 529
Supply includes:
Integral electric condensate
evaporation
Drilling template
Assembly parts
Approvals:
Detailed drawing:
H
B
T
Model No. SK 3304.500 3304.510 3304.540 3304.600
1)
3304.610
1)
3304.640
1)
Page
Colour RAL 7035
Rated operating voltage V, Hz 230, 1~, 50/60 115, 1~, 50/60
400, 3~, 50/
460, 3~, 60
230, 1~, 50/60 115, 1~, 50/60
400, 3~, 50/
460, 3~, 60
Dimensions mm
W (B) x H x D
(T)
400 x 950 x 260
to DIN 3168
L 35 L 35
L 35 L 50
1000 W/1450 W
1050 W/1100 W
1000 W/1450 W
980 W/1050 W
1000 W/1460 W
880 W/890 W
1000 W/1450 W
1050 W/1100 W
1000 W/1450 W
1050 W/1100 W
1000 W/1460 W
880 W/990 W
Rated current max. 3.9 A/4.3 A 8.0 A/8.8 A 2.2 A/2.1 A 3.9 A/4.3 A 8.0 A/8.8 A 2.2 A/2.1 A
Start-up current 12.0 A/14.0 A 26.0 A/28.0 A 11.5 A/12.7 A 12.0 A/14.0 A 26.0 A/28.0 A 11.5 A/12.7 A
Pre-fuse T 10.0 A 11.0 A 16.0 A 6.3 A 10.0 A
2)
10.0 A 11.0 A 16.0 A 6.3 A 10.0 A
2)

to DIN 3168
L 35 L 35
L 35 L 50
640 W/720 W
750 W/850 W
670 W/750 W
780 W/880 W
670 W/820 W
760 W/930 W
640 W/720 W
750 W/850 W
670 W/750 W
780 W/880 W
670 W/820 W
760 W/930 W
Refrigeration factor = L 35 L 35 1.6 1.7 1.6 1.7
Weight 39 kg 44 kg 40 kg 39 kg 44 kg 40 kg
3
/h
3
/h
Filter mats 3 3286.400 3286.400 3286.400 3286.400 3286.400 3286.400 299
Metal filters 1 3286.410 3286.410 3286.410 3286.410 3286.410 3286.410 300
SK BUS system 1 3124.100 3124.100 3124.100 3124.100 3124.100 3124.100 295
RiDiag II 1 3159.100 3159.100 3159.100 3159.100 3159.100 3159.100 347
Interface board 1 3124.200 3124.200 3124.200 3124.200 3124.200 3124.200 295
Condensate hose 1 3301.612 3301.612 3301.612 3301.612 3301.612 3301.612 303
1)
2)
Motor circuit-breaker.
Special voltages and other output categories available on request. We reserve the right to make technical modifications.
QK
.
QK/Pel
.
Model No. SK 3305.500 3305.510
1)
3305.540 3305.600
1)
3305.610
1)
3305.640
1)
Page
Colour RAL 7035
400, 3~, 50/
460, 3~, 60
230, 1~, 50/60 115, 1~, 50/60
400, 3~, 50/
460, 3~, 60
to DIN 3168
L 35 L 35
L 35 L 50
1500 W/1510 W
1150 W/1200 W
1500 W/1660 W
1150 W/1270 W
1500 W/1510 W
1230 W/1250 W
1500 W/1510 W
1150 W/1200 W
1500 W/1660 W
1150 W/1270 W
1500 W/1510 W
1230 W/1250 W
Pre-fuse T 16.0 A/16.0 A
14.0 A
20.0 A
3)

6.3 A 10.0 A
2)
16.0 A/16.0 A
14.0 A
20.0 A
3)

6.3 A 10.0 A
2)

to DIN 3168
L 35 L 35
L 35 L 50
870 W/890 W
1030 W/1150 W
1010 W/900 W
1180 W/1060 W
820 W/1000 W
980 W/1170 W
870 W/890 W
1030 W/1150 W
1010 W/900 W
1180 W/1060 W
820 W/1000 W
980 W/1170 W
Refrigeration factor = L 35 L 35 1.7 1.5 1.8 1.7 1.5 1.8
3
/h
3
/h
Filter mats 3 3286.400 3286.400 3286.400 3286.400 3286.400 3286.400 299
Metal filters 1 3286.410 3286.410 3286.410 3286.410 3286.410 3286.410 300
SK BUS system 1 3124.100 3124.100 3124.100 3124.100 3124.100 3124.100 295
RiDiag II 1 3159.100 3159.100 3159.100 3159.100 3159.100 3159.100 347
Interface board 1 3124.200 3124.200 3124.200 3124.200 3124.200 3124.200 295
Condensate hose 1 3301.612 3301.612 3301.612 3301.612 3301.612 3301.612 303
1)
2)
Motor circuit breaker.
3)
QK
.
QK/Pel
.
Rittal Malaysia
RITTAL Systems Sdn Bhd
7, Jalan TPP 1/1A Taman Industri Puchong
Batu 12 Jalan Puchong 47100 Puchong
Solangor, Malaysia
Phone: +603-8060 6688
Fax: +603-8060 8866
E-mail: [email protected] www.rittal.com.my
to IEC 60 529
to IEC 60 529
Supply includes:
evaporation
Drilling template
Assembly parts
Approvals:
Detailed drawing:
Cannot be installed
with SK 3332.XXX.
1
1
H
B
T
Model No. SK 3328.500 3328.510 3328.540 3328.600
1)
3328.610
1)
3328.640
1)
Page
Colour RAL 7035
400, 3~, 50/
460, 3~, 60
230, 1~, 50/60 115, 1~, 50/60
400, 3~, 50/
460, 3~, 60
to DIN 3168
L 35 L 35
L 35 L 50
2000 W/2360 W
1620 W/1745 W
2000 W/2360 W
1620 W/1745 W
2000 W/2350 W
1450 W/1690 W
2000 W/2360 W
1620 W/1745 W
2000 W/2360 W
1620 W/1745 W
2000 W/2350 W
1450 W/1690 W
Pre-fuse T 16.0 A 18.0 A 25.0 A
3)
6.3 A 10.0 A
2)
16.0 A 18.0 A 25.0 A
3)
6.3 A 10.0 A
2)

to DIN 3168
L 35 L 35
L 35 L 50
935 W/1055 W
1080 W/1250 W
965 W/1085 W
1110 W/1280 W
920 W/1145 W
1145 W/1395 W
935 W/1055 W
1080 W/1250 W
965 W/1085 W
1110 W/1280 W
920 W/1145 W
1145 W/1395 W
Refrigeration factor
=
L 35 L 35 2.1 2.1 2.2 2.1 2.1 2.2
3
/h
3
/h
Filter mats 3 3286.400 3286.400 3286.400 3286.400 3286.400 3286.400 299
Metal filters 1 3286.410 3286.410 3286.410 3286.410 3286.410 3286.410 300
SK BUS system 1 3124.100 3124.100 3124.100 3124.100 3124.100 3124.100 295
RiDiag II 1 3159.100 3159.100 3159.100 3159.100 3159.100 3159.100 347
Interface board 1 3124.200 3124.200 3124.200 3124.200 3124.200 3124.200 295
Condensate hose 1 3301.612 3301.612 3301.612 3301.612 3301.612 3301.612 303
1)
2)
3)
QK
.
QK/Pel
.
Model No. SK 3329.500 3329.510 3329.540 3329.600
1)
3329.610
1)
3329.640
1)
Page
Colour RAL 7035
400, 3~, 50/
460, 3~, 60
230, 1~, 50/60 115, 1~, 50/60
400, 3~, 50/
460, 3~, 60
Dimensions mm W (B) x H x D (T) 400 x 1580 x 295 400 x 1580 x 295
to DIN 3168
L 35 L 35
L 35 L 50
2500 W/2660 W
1840 W/1920 W
2500 W/2700 W
1900 W/1950 W
2500 W/2660 W
1840 W/1920 W
2500 W/2700 W
1900 W/1950 W
Pre-fuse T 16.0 A 18.0 A 25.0 A
3)
6.3 A 10.0 A
2)
16.0 A 18.0 A 25.0 A
3)
6.3 A 10.0 A
2)

to DIN 3168
L 35 L 35
L 35 L 50
1270 W/1410 W
1470 W/1700 W
1300 W/1440 W
1500 W/1730 W
1295 W/1495 W
1545 W/1845 W
1270 W/1410 W
1470 W/1700 W
1300 W/1440 W
1500 W/1730 W
1295 W/1495 W
1545 W/1845 W
=
L 35 L 35 2.0 1.9 1.9 2.0 1.9 1.9
3
/h
3
/h
Filter mats 3 3286.400 3286.400 3286.400 3286.400 3286.400 3286.400 299
Metal filters 1 3286.410 3286.410 3286.410 3286.410 3286.410 3286.410 300
SK BUS system 1 3124.100 3124.100 3124.100 3124.100 3124.100 3124.100 295
RiDiag II 1 3159.100 3159.100 3159.100 3159.100 3159.100 3159.100 347
Interface board 1 3124.200 3124.200 3124.200 3124.200 3124.200 3124.200 295
Condensate hose 1 3301.612 3301.612 3301.612 3301.612 3301.612 3301.612 303
1)
2)
3)
QK
.
QK/Pel
.
Model No. SK 3332.540 3332.640
1)
Page
Colour RAL 7035
400, 3~, 50/
460, 3~, 60
to DIN 3168
L 35 L 35
L 35 L 50
4000 W/4400 W
3070 W/3570 W
Rated current max. 4.2 A/4.2 A
Start-up current 9.2 A/11.0 A
2)

to DIN 3168
L 35 L 35
L 35 L 50
1720 W/2120 W
1990 W/2460 W
=
L 35 L 35 2.3
Weight 91 kg
3
/h
3
/h
Filter mats 3 3286.400 3286.400 299
Metal filters 1 3286.410 3286.410 300
SK BUS system 1 3124.100 3124.100 295
RiDiag II 1 3159.100 3159.100 347
Interface board 1 3124.200 3124.200 295
Condensate hose 1 3301.612 3301.612 303
1)
2)
QK
.
QK/Pel
.
TopTherm Blue e, slimline, useful cooling output 1500 W
Model No. SK 3366.500 3366.510 3366.540 3366.600
1)
3366.610
1)
3366.640
1)
Page
Colour RAL 7035
400, 3~, 50/
460, 3~, 60
230, 1~, 50/60 115, 1~, 50/60
400, 3~, 50/
460, 3~, 60
to DIN 3168
L 35 L 35
L 35 L 50
1500 W/1500 W
1050 W/1100 W
1500 W/1500 W
980 W/1080 W
1500 W/1500 W
1050 W/1100 W
1500 W/1500 W
980 W/1080 W
Pre-fuse T 10.0 A
14.0 A
20.0 A
3)

6.3 A
10.0 A
2)

10.0 A
14.0 A
20.0 A
3)

6.3 A
10.0 A
2)

to DIN 3168
L 35 L 35
L 35 L 50
940 W/1070 W
1115 W/1230 W
940 W/1070 W
1115 W/1230 W
970 W/1120 W
1140 W/1310 W
940 W/1070 W
1115 W/1230 W
940 W/1070 W
1115 W/1230 W
970 W/1120 W
1140 W/1310 W
=
L 35 L 35 1.6 1.5 1.6 1.5
3
/h
3
/h
Filter mats 3 3286.400 3286.400 3286.400 3286.400 3286.400 3286.400 299
Metal filters 1 3286.410 3286.410 3286.410 3286.410 3286.410 3286.410 300
Trim frame 1 3377.000 3377.000 3377.000 3377.000 3377.000 3377.000 297
SK BUS system 1 3124.100 3124.100 3124.100 3124.100 3124.100 3124.100 295
RiDiag II 1 3159.100 3159.100 3159.100 3159.100 3159.100 3159.100 347
Interface board 1 3124.200 3124.200 3124.200 3124.200 3124.200 3124.200 295
Condensate hose 1 3301.612 3301.612 3301.612 3301.612 3301.612 3301.612 303
1)
2)
3)
QK
.
QK/Pel
.
to IEC 60 529
to IEC 60 529
Supply includes:
evaporation
Drilling template
Assembly parts
Approvals:
Detailed drawing:
TopTherm Blue e, design NEMA 4X, useful cooling output 500/1000/1500 W
2)
3303.514
2)
3304.504 3304.514 3304.544 3305.504 3305.514 3305.544 Page
Material Stainless steel
Rated operating voltage
V, Hz
230, 1~,
50/60
115, 1~,
60
230, 1~,
50/60
115, 1~,
50/60
400, 3~, 50/
460, 3~, 60
230, 1~,
50/60
115, 1~,
50/60
400, 3~, 50/
460, 3~, 60
Dimensions mm W x H x D 285 x 620 x 298 405 x 1020 x 358 405 x 1020 x 358
to DIN 3168
L 35 L 35
L 35 L 50
500 W/
610 W
280W/
350 W
500 W
280 W
1000 W/
1450 W
1050 W/
1100 W
1000 W/
1450 W
980 W/
1050 W
1000 W/
1460 W
880 W/
990 W
1500 W/
1510 W
1150 W/
1200 W
1500 W/
1660 W
1150 W/
1270 W
1500 W/
1510 W
1230 W/
1250 W
Rated current max.
2.6 A/
2.6 A
5.7 A
3.9 A/
4.3 A
8.0 A
8.8 A
2.2 A
2.1 A
5.5 A
5.8 A
11.5 A
12.5 A
2.6 A
2.8 A
Start-up current
5.1 A/
6.4 A
11.5 A
12.0 A/
14.0 A
26.0 A/
28.0 A
11.5 A/
12.7 A
12.0 A/
14.0 A
26.0 A/
28.0 A
12.2 A/
11.3 A
Pre-fuse T 10.0 A 10.0 A 10.0 A
11.0 A
16.0 A
6.3 A
10.0 A
1)

16.0 A
14.0 A
20.0 A
3)

6.3 A
10.0 A
1)

to DIN 3168
L 35 L 35
L 35 L 50
360 W/
380 W
420 W/
390 W
470 W
500 W
640 W/
720 W
750 W/
850 W
670 W/
750 W
780 W/
880 W
670 W/
820 W
760 W/
930 W
870 W/
890 W
1030 W/
1150 W
1010 W/
900 W
1180 W/
1060 W
820 W/
1000 W
980 W/
1170 W
=
L 35 L 35 1.4 1.6 1.6 1.7 1.7 1.5 1.8
Refrigerant R134a, 170 g R134a, 325 g R134a, 325 g R134a, 600 g
Permissible operating pressure p. max. 28 bar 25 bar
Operating temperature
and setting range
+20C to +55C
Protection category NEMA 4X
Weight 25 kg 49 kg 54 kg 50 kg 51 kg 56 kg 52 kg
3
/h 900 m
3
/h 900 m
3
/h
3
/h 600 m
3
/h 800 m
3
/h
Door-operated switch 1 4127.010 4127.010 4127.010 4127.010 4127.010 4127.010 4127.010 4127.010 496
SK BUS system 1 3124.100 3124.100 3124.100 3124.100 3124.100 295
RiDiag II 1 3159.100 3159.100 3159.100 3159.100 3159.100 3159.100 3159.100 3159.100 347
Interface board 1 3124.200 3124.200 3124.200 3124.200 3124.200 3124.200 3124.200 3124.200 295
Condensate hose 1 3301.610 3301.610 3301.612 3301.612 3301.612 3301.612 3301.612 3301.612 303
1)
2)
Without integral condensate evaporation.
3)
Extended delivery times. Special voltages available on request. We reserve the right to make technical modifications.
QK
.
QK/Pel
.
See tables.
Supply includes:
evaporation
Drilling template
Assembly parts
Approvals:
Detailed drawing:
TopTherm Blue e, design NEMA 4X, useful cooling output 2000/2500 W
Model No. SK 3328.504 3328.514 3328.544 3329.504 3329.514 3329.544 Page
Material Stainless steel
V, Hz
230, 1~, 50/60 115, 1~, 50/60
400, 3~, 50/
460, 3~, 60
230, 1~, 50/60 115, 1~, 50/60
400, 3~, 50/
460, 3~, 60
to DIN 3168
L 35 L 35
L 35 L 50
2000 W/2360 W
1620 W/1745 W
2000 W/2360 W
1620 W/1745 W
2000 W/2350 W
1450 W/1690 W
2500 W/2660 W
1840 W/1920 W
2500 W/2660 W
1840 W/1920 W
2500 W/2700 W
1900 W/1950 W
Rated current max. 6.1 A/6.6 A 13.4 A 14.8 A 2.8 A/3.3 A 8.2 A/9.3 A 17.0 A/20.0 A 3.7 A/3.8 A
Pre-fuse T 16.0 A
18.0 A
25.0 A
2)

6.3 A
10.0 A
1)

16.0 A
18.0 A
25.0 A
2)

6.3 A
10.0 A
1)

to DIN 3168
L 35 L 35
L 35 L 50
935 W/1055 W
1080 W/1250 W
965 W/1085 W
1110 W/1280 W
920 W/1145 W
1145 W/1395 W
1270 W/1410 W
1470 W/1700 W
1300 W/1440 W
1500 W/1730 W
1295 W/1495 W
1545 W/1845 W
=
L 35 L 35 2.1 2.1 2.2 2.0 1.9 1.9
Protection category NEMA 4X
3
/h 710 m
3
/h
3
/h 640 m
3
/h
SK BUS system 1 3124.100 3124.100 3124.100 3124.100 3124.100 3124.100 295
RiDiag II 1 3159.100 3159.100 3159.100 3159.100 3159.100 3159.100 347
Interface board 1 3124.200 3124.200 3124.200 3124.200 3124.200 3124.200 295
Condensate hose 1 3301.612 3301.612 3301.612 3301.612 3301.612 3301.612 303
1)
2)
Delivery times available on request. Special voltages available on request. We reserve the right to make technical modifications.
QK
.
QK/Pel
.
TopTherm Blue e, Ex cooling units for zone 22 (dust);
useful cooling output 500/1000/1500 W
Model No. SK 3303.530 3304.530 3304.560 3305.530 3305.560 Page
Colour RAL 7035
Rated operating voltage V, Hz 230, 1~, 50/60 230, 50/60
400, 3~, 50/
460, 3~, 60
230, 50/60
400, 3~, 50/
460, 3~, 60
to DIN 3168
L 35 L 35
L 35 L 50
500 W/610 W
280 W/350 W
1000 W/1450 W
1050 W/1100 W
1000 W/1460 W
880 W/990 W
1500 W/1510 W
1150 W/1200 W
1500 W/1510 W
1230 W/1250 W
Rated current max. 2.6 A/2.6 A 3.9 A/4.3 A 2.1 A/2.2 A 5.4 A/6.0 A 2.3 A/2.6 A
Start-up current 5.1 A/6.4 A 12.0 A/14.0 A 11.5 A/12.7 A 22.0 A/24.0 A 12.2 A/11.3 A
Pre-fuse T 10.0 A 10.0 A/10.0 A 6.3 A 10.0 A
1)
16.0 A/16.0 A 6.3 A 10.0 A
1)

to DIN 3168
L 35 L 35
L 35 L 50
360 W/380 W
420 W/390 W
640 W/720 W
750 W/850 W
670 W/820 W
760 W/930 W
870 W/980 W
1030 W/1150 W
820 W/1000 W
980 W/1170 W
Refrigeration factor = L 35 L 35 1.4 1.4 1.7 1.7 1.8
Refrigerant R134a, 170 g R134a, 325 g R134a, 325 g R134a, 600 g
Protection category
3
/h 900 m
3
/h
3
/h 600 m
3
/h 800 m
3
/h
Filter mats 3 3286.300 3286.400 3286.400 3286.400 3286.400 299
Door-operated switch 1 4127.010 4127.010 4127.010 4127.010 4127.010 496
Digital temperature display/thermostat 1 3114.200 3114.200 3114.200 3114.200 3114.200 293
Condensate hose 1 3301.612 3301.612 3301.612 3301.612 3301.612 303
1)
Without electric condensate evaporation.
Delivery times available on request. We reserve the right to make technical modifications.
QK
.
QK/Pel
.
Climate control accessories Page 291 Software & services Page 333 RiDiag II Page 347
Permissible operating
pressure p. max.: 25 bar
Duty cycle: 100%
Type of connection:
Plug-in terminal strip
to IEC 60 529
to IEC 60 529
Supply includes:
evaporation
Fully wired ready for
connection
Drilling template
Assembly parts
Accessories:
Roof plate for TS 8 with
mounting cut-out, see page 296.
New: TopTherm
roof-mounted cooling unit,
useful cooling output 1100/
3000 W, for office and IT appli-
cations with targeted air routing,
see page 246. Detailed drawing
and technical information can be
found on the Internet.
Approvals:
Detailed drawing:
Model No. SK 3382.500 3382.600
1)
3382.510 3382.610
1)
Page
Material Sheet steel Stainless steel Sheet steel Stainless steel
Colour RAL 7035 RAL 7035
to DIN 3168
L 35 L 35
L 35 L 50
500 W/586 W
273 W/429 W
Rated current max. 2.3 A/2.6 A 4.1 A/5.4 A
Start-up current 9.1 A/8.8 A 18.2 A/15.9 A
Pre-fuse T 10.0 A 6.3 A 10.0 A
2)

to DIN 3168
L 35 L 35
L 35 L 50
302 W/347 W
342 W/402 W
312 W/357 W
352 W/422 W
Weight 30 kg 35 kg
3
/h
3
/h
Filter mats 3 3286.500 3286.500 3286.500 3286.500 299
Metal filters 1 3286.510 3286.510 3286.510 3286.510 300
Quick-change frame 1 3286.700 3286.700 3286.700 3286.700 297
SK BUS system 1 3124.100 3124.100 3124.100 3124.100 295
Interface board 1 3124.200 3124.200 3124.200 3124.200 295
Air duct system 1 3286.870 3286.870 3286.870 3286.870 291
Stoppers 2 3286.780 3286.780 3286.780 3286.780 292
Condensate hose 1 3301.612 3301.612 3301.612 3301.612 303
1)
2)
QK
.
QK/Pel
.
Model No. SK 3359.500 3359.600
1)
3359.510 3359.610
1)
3359.540 3359.640
1)
Page
Material Sheet steel Stainless steel Sheet steel Stainless steel Sheet steel Stainless steel
Colour RAL 7035 RAL 7035 RAL 7035
Rated operating voltage V, Hz 230, 1~, 50/60 115, 1~, 50/60 400, 2~, 50/60
to DIN 3168
L 35 L 35
L 35 L 50
750 W/625 W
304 W/368 W
Rated current max. 2.8 A/3.7 A 5.6 A/7.4 A 1.6 A/2.1 A
Start-up current 9.2 A/9.0 A 18.4 A/18.0 A 5.4 A/5.2 A
Pre-fuse T 10.0 A 11.0 A 16.0 A
2)
6.3 A 10.0 A
2)

to DIN 3168
L 35 L 35
L 35 L 50
401 W/494 W
444 W/536 W
411 W/509 W
454 W/526 W
Weight 32 kg 37 kg
3
/h
3
/h
Filter mats 3 3286.500 3286.500 3286.500 3286.500 3286.500 3286.500 299
Metal filters 1 3286.510 3286.510 3286.510 3286.510 3286.510 3286.510 300
Quick-change frame 1 3286.700 3286.700 3286.700 3286.700 3286.700 3286.700 297
SK BUS system 1 3124.100 3124.100 3124.100 3124.100 3124.100 3124.100 295
Interface board 1 3124.200 3124.200 3124.200 3124.200 3124.200 3124.200 295
Air duct system 1 3286.870 3286.870 3286.870 3286.870 3286.870 3286.870 291
Stoppers 2 3286.780 3286.780 3286.780 3286.780 3286.780 3286.780 292
Condensate hose 1 3301.612 3301.612 3301.612 3301.612 3301.612 3301.612 303
1)
2)
QK
.
QK/Pel
.
Model No. SK 3383.500 3383.600
1)
3383.510 3383.610
1)
3383.540
1)
3383.640 Page
3)
115, 1~, 50/60
3)
400, 2~, 50/60
3)

to DIN 3168
L 35 L 35
L 35 L 50
1000 W/1088 W
709 W/807 W
Pre-fuse T 10.0 A 11.0 A 16.0 A
2)
6.3 A 10.0 A
2)

to DIN 3168
L 35 L 35
L 35 L 50
426 W/514 W
485 W/606 W
456 W/524 W
495 W/616 W
Refrigeration factor = L 35 L 35 2.3 2.2
Weight 40 kg 46 kg
3
/h
3
/h
Filter mats 3 3286.500 3286.500 3286.500 3286.500 3286.500 3286.500 299
Metal filters 1 3286.510 3286.510 3286.510 3286.510 3286.510 3286.510 300
SK BUS system 1 3124.100 3124.100 3124.100 3124.100 3124.100 3124.100 295
Interface board 1 3124.200 3124.200 3124.200 3124.200 3124.200 3124.200 295
Air duct system 1 3286.870 3286.870 3286.870 3286.870 3286.870 3286.870 291
Stoppers 2 3286.880 3286.880 3286.880 3286.880 3286.880 3286.880 292
Condensate hose 1 3301.612 3301.612 3301.612 3301.612 3301.612 3301.612 303
1)
2)
3)
Tu max = 53C/60 Hz.
QK
.
QK/Pel
.
TopTherm Blue e, useful cooling output 1100/3000 W, especially for office and IT applications
Model No. SK 3273.500 3273.515
1)
3301.800 Page
Application areas Office application IT application
Colour RAL 7035
Rated operating voltage V, Hz 230, 1~, 50/60 115, 1~, 50/60 230, 1~, 50
to DIN 3168
L 35 L 35
L 35 L 50
1100 W/1200 W
850 W/870 W
3000 W
3200 W
L 25 L 35
L 35 L 45
Rated current max. 5.2 A/5.4 A 11.0 A/11.5 A 10.4 A
Start-up current 15.5 A/16.5 A 32.0 A/35.0 A 36.0 A
Pre-fuse T 10.0 A 11.0 A 16.0 A
2)
Air circuit-breaker 16.0 A
to DIN 3168
L 35 L 35
L 35 L 50
760 W/780 W
830 W/970 W
790 W/810 W
860 W/1010 W
1820 W
2325 W
L 25 L 35
L 35 L 45
Operating temperature and setting range +20C to +50C +20C to +45C
3
/h 2000 m
3
/h
3
/h 1450 m
3
/h
Filter mats 3 3286.500 3286.500 3286.600 299
Metal filters 1 3286.510 3286.510 3286.610 300
Quick-change frame 1 3286.700 3286.700 3286.800 297
Door-operated switch 1 4127.010 4127.010 4127.010 496
SK BUS system 1 3124.100 3124.100 3124.100 295
Interface board 1 3124.200 3124.200 3124.200 295
Air duct system 1 3286.870 3286.870 3286.970 291
Stoppers 2 3286.880 3286.880 3286.980 292
Condensate hose 1 3301.612 3301.612 3301.612 303
1)
2)
In order to avoid increased condensation, we recommend enclosures with a protection category of at least IP 54.
QK
.
QK/Pel
.
Model No. SK 3384.500 3384.600
1)
3384.510 3384.610
1)
3384.540 3384.640
1)
Page
3)
115, 1~, 50/60
3)
400, 2~, 50/60
3)

to DIN 3168
L 35 L 35
L 35 L 50
1500 W/1637 W
1207 W/1308 W
Pre-fuse T 10.0 A 14.0 A 20.0 A
2)
6.3 A 10.0 A
2)

to DIN 3168
L 35 L 35
L 35 L 50
641 W/743 W
741 W/857 W
666 W/757 W
775 W/899 W
Weight 41 kg 47 kg
3
/h
3
/h
Filter mats 3 3286.500 3286.500 3286.500 3286.500 3286.500 3286.500 299
Metal filters 1 3286.510 3286.510 3286.510 3286.510 3286.510 3286.510 300
SK BUS system 1 3124.100 3124.100 3124.100 3124.100 3124.100 3124.100 295
Interface board 1 3124.200 3124.200 3124.200 3124.200 3124.200 3124.200 295
Air duct system 1 3286.870 3286.870 3286.870 3286.870 3286.870 3286.870 291
Stoppers 2 3286.880 3286.880 3286.880 3286.880 3286.880 3286.880 292
Condensate hose 1 3301.612 3301.612 3301.612 3301.612 3301.612 3301.612 303
1)
2)
3)
Tu max = 53C/60 Hz.
QK
.
QK/Pel
.
Model No. SK 3385.500 3385.600
1)
3385.510 3385.610
1)
3385.540 3385.640
1)
Page
3)
115, 1~, 50/60
3)
400, 2~, 50/60
3)

to DIN 3168
L 35 L 35
L 35 L 50
2000 W/2030 W
1454 W/1547 W
2000 W/2140 W
1409 W/1511 W
Pre-fuse T 10.0 A 14.0 A 20.0 A
2)
6.3 A 10.0 A
2)

to DIN 3168
L 35 L 35
L 35 L 50
970 W/1155 W
1081 W/1511 W
1020 W/1235 W
1441 W/1310 W
Weight 42 kg 48 kg
3
/h
3
/h
Filter mats 3 3286.500 3286.500 3286.500 3286.500 3286.500 3286.500 299
Metal filters 1 3286.510 3286.510 3286.510 3286.510 3286.510 3286.510 300
SK BUS system 1 3124.100 3124.100 3124.100 3124.100 3124.100 3124.100 295
Interface board 1 3124.200 3124.200 3124.200 3124.200 3124.200 3124.200 295
Air duct system 1 3286.870 3286.870 3286.870 3286.870 3286.870 3286.870 291
Stoppers 2 3286.880 3286.880 3286.880 3286.880 3286.880 3286.880 292
Condensate hose 1 3301.612 3301.612 3301.612 3301.612 3301.612 3301.612 303
1)
2)
3)
Tu max = 53C/60 Hz.
QK
.
QK/Pel
.
TopTherm Blue e, useful cooling output 3000 W/4000 W
Model No. SK 3386.540 3386.640
1)
3387.540 3387.640
1)
Page
Material Sheet steel Stainless steel Sheet steel Stainless steel
Rated operating voltage V, Hz 400, 3~, 50/460, 3~, 60
to DIN 3168
L 35 L 35
L 35 L 50
3000 W/3300 W
2200 W/2500 W
4000 W/4200 W
3250 W/3490 W
Pre-fuse T Motor circuit breaker 6.3 A 10.0 A
to DIN 3168
L 35 L 35
L 35 L 50
1190 W/1500 W
1440 W/1780 W
1630 W/2070 W
1880 W/2350 W
Weight 70 kg 77 kg
3
/h 3870 m
3
/h
3
/h 1420 m
3
/h
Filter mats 3 3286.600 3286.600 3286.600 3286.600 299
Metal filters 1 3286.610 3286.610 3286.610 3286.610 300
Quick-change frame 1 3286.900 3286.900 3286.900 3286.900 297
SK BUS system 1 3124.100 3124.100 3124.100 3124.100 295
Interface board 1 3124.200 3124.200 3124.200 3124.200 295
Air duct system 1 3286.970 3286.970 3286.970 3286.970 291
Stoppers 2 3286.980 3286.980 3286.980 3286.980 292
Condensate hose 1 3301.612 3301.612 3301.612 3301.612 303
1)
QK
.
QK/Pel
.
Climate control accessories Page 291 TS 8 enclosures Page 69 Software & services Page 333
Colour:
RAL 7035
to IEC 60 529
to IEC 60 529
Supply includes:
Cooling module prepared for
installation in section door
evaporation
Also required:
Section door, fits TS 8
enclosures, 600, 800,
1200 mm widths and
1800, 2000 mm heights,
see page 249.
Base/plinth,
100 or 200 mm high,
see page 361.
Approvals:
Detailed drawing:
Cooling modules Blue e, 1500/2500 W useful cooling output
Model No. SK with Comfort controller 3307.700 3307.710 3307.740 3310.700 3310.710 3310.740 Page
400, 3~, 50/
460, 3~, 60
230, 1~, 50/60 115, 1~, 50/60
400, 3~, 50/
460, 3~, 60
to DIN 3168
L 35 L 35
L 35 L 50
1500 W/1550 W
850 W/900 W
1500 W/1550 W
930 W/950 W
2500 W/2520 W
1620 W/1730 W
2500 W/2500 W
1760 W/1800 W
Pre-fuse T 16.0 A/16.0 A
11.0 A
16.0 A
3)

6.3 A 10.0 A
1)
16.0 A/16.0 A
18.0 A
25.0 A
3)

6.3 A 10.0 A
1)

to DIN 3168
L 35 L 35
L 35 L 50
850 W/1050 W
1000 W/1150 W
870 W/1080 W
1070 W/1180 W
790 W/1000 W
900 W/1100 W
1310 W/1520 W
1480 W/1850 W
1360 W/1570 W
1530 W/1900 W
1130 W/1480 W
1400 W/1750 W
=
L 35 L 35 1.8 1.7 1.9 1.9 1.8 2.2
Refrigerant R134a, 700 g R134a, 1175 g
Weight
2)
68 kg 72 kg 68 kg 73 kg 78 kg 72 kg
3
/h 1100 m
3
/h
3
/h 1100 m
3
/h
Temperature control Comfort controller (factory setting +35C)
SK BUS system 1 3124.100 3124.100 3124.100 3124.100 3124.100 3124.100 295
RiDiag II 1 3159.100 3159.100 3159.100 3159.100 3159.100 3159.100 347
Interface board 1 3124.200 3124.200 3124.200 3124.200 3124.200 3124.200 295
1)
Motor circuit breaker
2)
Includes section door weight
3)
Transformer protection switch
QK
.
QK/Pel
.
Climate control accessories Page 291 TS 8 enclosures Page 69 Software & services Page 333
Colour:
RAL 7035
Supply includes:
Section door without precon-
figured cooling module
TS 8 hinges, door opening
angle approx. 110
Note for 1200 mm wide
TS 8 enclosures:
With the unit positioned on
the right, one pack consists
of a section door for installing
in the right-hand half of the
enclosure plus a special
lockable door for the left-hand
half.
With the device positioned on
the left, one pack consists
of a section door for installing
in the left-hand half of the
enclosure. The existing lock-
able door on the right may be
used.
Also required:
Cooling module,
see page 248.
Base/plinth,
100 or 200 mm high,
see page 361.
Approvals:
Detailed drawing:
Section doors for installing cooling modules
Model No. SK 3300.040 3300.050 3300.060 3300.070 3300.080 3300.090 3300.110 3300.120
Dimensions
to fit TS enclosures
Height mm 1800 2000 1800 2000 1800 2000 1800 2000
Dimensions
to fit TS enclosures
1200
(unit positioned on the left)
1200
(unit positioned on the right)
Metal filters 1 3284.210 3284.210 3284.210 3284.210
All SK 3307.700/.710/.740 or 3310.700/.710/.740 cooling module models, see page 248, can be integrated into one of the section doors mentioned above.
B
H
B
H
B
H
B
H
250
251
Liquid cooling
Air/water heat exchangers
Roof-mounted, water-carrying parts CuAl........................... 2500 W.........252
Roof-mounted, water-carrying parts CuAl........................... 4000 W.........253
Roof-mounted, water-carrying parts V4A (1.4571) ............. 1875 W.........253
Roof-mounted, water-carrying parts V4A (1.4571) ............. 3000 W.........254
Wall-mounted ........................................................ 300/600/1250 W.........255
Wall-mounted, water-carrying parts CuAl ............................. 500 W.........256
Wall-mounted, water-carrying parts CuAl ........................... 1000 W.........256
Wall-mounted ...................................................................... 7000 W.........258
Wall-mounted, water-carrying parts V4A (1.4571) ................ 500 W.........259
Wall-mounted, water-carrying parts V4A (1.4571) ................ 750 W.........259
Wall-mounted, water-carrying parts V4A (1.4571) .............. 1750 W.........260
Cold Plate
Cold Plate incl. T channel for frequency converters .. 2500/3000 W.........262
Accessories for Cold Plate........................................................................263
Chillers for water
TopTherm.......................................................................... 1/1.5 kW.........264
TopTherm....................................................................... 3/4.5/6 kW.........265
TopTherm, for wall mounting.......................................... 1/2.5/4 kW.........266
TopTherm........................................................................ 8 40 kW.........267
In a floor-standing enclosure....................................... 2.1 7.7 kW.........268
In a floor-standing enclosure......................................... 10 25 kW.........269
In a floor-standing enclosure......................................... 32 59 kW.........269
Climate control accessories Page 291 Recooling systems Page 264 Software & Services Page 333
Colour:
RAL 7035
Supply includes:
connection, with connector
Drilling template, sealing mat
and assembly parts
Also required:
Cooling water system
such as recooling systems,
from page 264.
Approvals:
Detailed drawing:
Roof-mounted, useful cooling output 2500 W, water-carrying parts CuAl
Model No. SK 3209.500 3209.100 Page
Thermostat
(factory setting +35C)
e-Comfort controller
Basic controller
Useful cooling output L 35 W 10, 400 l/h 2500 W
Rated operating voltage V, Hz 230, 50/60
Pre-fuse T 4.0 A
Cooling medium Water (for specifications see Internet; user manual)
Water inlet temperature > +1C to +30C
Permissible operating pressure p. max. 1 to 10 bar
Protection category to IEC 60 529 IP 55
1)

Duty cycle 100%
Type of connection Plug-in terminal strip
Weight 23.5 kg
Air throughput of the fans (unimpeded air flow) 1030 m
3
/h
SK BUS system 1 3124.100 295
Interface board 1 3124.200 295
Air duct system 1 3286.870 3286.870 291
Stoppers 1 3286.880 3286.880 292
Condensate hose 1 3301.612 3301.612 303
Flow regulator valve 1 see page 304
1)
IP 65 available on request.
Roof-mounted, useful cooling output 4000 W, water-carrying parts CuAl
Roof-mounted, useful cooling output 1875 W, water-carrying parts V4A (1.4571)
Model No. SK 3210.500 3210.100 3210.540
1)
3210.140
1)
Page
Thermostat
Basic controller
Rated operating voltage V, Hz 230, 50/60 400, 2~, 50/60
Pre-fuse T 4.0 A
2)

Duty cycle 100%
Weight 25.5 kg 29.5 kg
3
/h
SK BUS system 1 3124.100 3124.100 295
Interface board 1 3124.200 3124.200 295
Air duct system 1 3286.870 3286.870 3286.870 3286.870 291
Stoppers 1 3286.880 3286.880 3286.880 3286.880 292
Condensate hose 1 3301.612 3301.612 3301.612 3301.612 303
1)
2)
1)
3209.104
1)
Page
Thermostat
Basic controller
Pre-fuse T 4.0 A
2)

Duty cycle 100%
Weight 23.5 kg
3
/h
SK BUS system 1 3124.100 295
Air duct system 1 3286.870 3286.870 291
Stoppers 1 3286.880 3286.880 292
Condensate hose 1 3301.612 3301.612 303
1)
2)
Roof-mounted, useful cooling output 3000 W, water-carrying parts V4A (1.4571)
1)
3210.104
1)
Page
Thermostat
Basic controller
Pre-fuse T 4.0 A
2)

Duty cycle 100%
Weight 25.5 kg
3
/h
SK BUS system 1 3124.100 295
Air duct system 1 3286.870 3286.870 291
Stoppers 1 3286.880 3286.880 292
Condensate hose 1 3301.612 3301.612 303
1)
2)
Rittal Norway
RITTAL AS
Postboks 258 N-1401 Ski
Phone: +47 64 85 13 00 Fax: +47 64 85 13 01
Besksadresse: Regnbueveien 10
N-1405 Langhus
E-mail: [email protected] www.rittal.no
Climate control accessories Page 291 Recooling systems Page 264 Software & Services Page 333
Colour:
RAL 7035
Supply includes:
connection
Drilling template
and assembly parts
Also required:
Cooling water system
such as recooling systems,
see from page 264.
Approvals:
Detailed drawing:
Wall-mounted, useful cooling output 300/600/1250 W
Model No. SK 3212.230 3212.115
1)
3212.024 3214.100 3215.100 Page
Temperature control Thermostat-controlled magnetic valve
L 35 W 10, 200 l/h
L 35 W 10, 400 l/h
300 W
600 W
650 W
1250 W
1300 W
Rated operating voltage V, Hz 230, 50/60 115, 50/60 24 V (DC) 230, 50/60
Rated current max. 0.11 A/0.13 A 0.23 A/0.24 A 1.20 A 0.17 A/0.18 A 0.38 A/0.4 A
2)

Duty cycle 100%
Type of connection Connection clamp Terminal strip
3
/h 250 m
3
/h 120 m
3
/h 200 m
3
/h
Temperature monitoring
Internal thermostat, with change-over contact,
switching load 16 A, setting range +20C to +60C
Digital temperature display/thermostat 1 3114.200 3114.200 3114.200 3114.200 3114.200 293
Door-operated switch 1 4127.010 4127.010 4127.010 4127.010 4127.010 496
Condensate hose 1 3301.610 3301.610 3301.610 3301.612 3301.612 303
1)
2)
Wall-mounted, useful cooling output 500 W, water-carrying parts CuAl
Model No. SK 3363.500 3363.100 Page
Thermostat
Basic controller
230, 1~,
50/60
230, 1~,
50/60
Pre-fuse T 4.0 A
Water inlet temperature +1C to +30C
Water connection Quick-release fastener system
1)

Duty cycle 100%
Weight 12 kg
Air throughput of the fans (unimpeded air flow) 270/320 m
3
/h
SK BUS system 1 3124.100 295
Condensate hose 1 3301.612 3301.612 303
Threaded adaptor for quick-release fastener
with G3/8 internal thread
2 3201.900 3201.900 304
with G3/8 external thread
2 3201.910 3201.910 304
1)
Model No. SK 3364.500 3364.100 Page
Thermostat
Basic controller
Pre-fuse T 4.0 A
1)

Duty cycle 100%
Weight 15 kg
3
/h
SK BUS system 1 3124.100 295
Condensate hose 1 3301.612 3301.612 303
2 3201.900 3201.900 304
2 3201.910 3201.910 304
1)
Model No. SK 3373.500 3373.100 Page
Thermostat
Basic controller
Pre-fuse T 4.0 A
1)

Duty cycle 100%
Weight 20 kg
3
/h
SK BUS system 1 3124.100 295
Condensate hose 1 3301.612 3301.612 303
2 3201.900 3201.900 304
2 3201.910 3201.910 304
1)
Model No. SK 3374.500 3374.100 Page
Thermostat
Basic controller
Pre-fuse T 4.0 A
1)

Duty cycle 100%
Weight 20 kg
3
/h
SK BUS system 1 3124.100 295
Condensate hose 1 3301.612 3301.612 303
2 3201.900 3201.900 304
2 3201.910 3201.910 304
1)
Wall-mounted, useful cooling output 7000 W
Model No. SK 3375.500 3375.100 Page
Thermostat
Basic controller
Pre-fuse T 4.0 A
1)

Duty cycle 100%
Weight 56 kg
Air throughput of the fans (unimpeded air flow) 2365/2,750 m
3
/h
SK BUS system 1 3124.100 295
Condensate hose 1 3301.612 3301.612 303
2 3201.900 3201.900 304
2 3201.910 3201.910 304
1)
1)
Page
Temperature control Thermostat-controlled magnetic valve
L 35 W 10, 500 l/h
L 35 W 20, 500 l/h
7000 W
4500 W
Rated operating voltage V, Hz 400, 3~, 50/60 460, 3~, 60
Rated current max. 1.4 A/1.6 A 1.2 A
Pre-fuse T 4.0 A, 3-pole
Power consumption Pel 450 W/700 W 630 W
2)

Duty cycle 100%
Type of connection Terminal strip
Weight 79 kg
3
/h
Digital temperature display/thermostat 1 3114.200 293
Door-operated switch 1 4127.010 496
Condensate hose 1 3301.612 303
1)
2)
Wall-mounted, useful cooling output 500 W, water-carrying parts V4A (1.4571)
1)
3363.104
1)
Page
Thermostat
Basic controller
External transformer
Pre-fuse T 4.0 A
2)

Duty cycle 100%
3)

Weight 12 kg
3
/h
SK BUS system 1 3124.100 295
Condensate hose 1 3301.612 3301.612 303
1)
2)
3)
Threaded adaptor for quick-release fastener available on request.
1)
3364.104
1)
Page
Thermostat
Basic controller
External transformer
Pre-fuse T 4.0 A
2)

Duty cycle 100%
3)

Weight 15 kg
3
/h
SK BUS system 1 3124.100 295
Condensate hose 1 3301.612 3301.612 303
1)
2)
3)
1)
3373.104
1)
Page
Thermostat
Basic controller
Pre-fuse T 4.0 A
2)

Duty cycle 100%
3)

Weight 20 kg
3
/h
SK BUS system 1 3124.100 295
Condensate hose 1 3301.612 3301.612 303
1)
2)
3)
1)
3374.104
1)
Page
Thermostat
Basic controller
Pre-fuse T 4.0 A
2)

Duty cycle 100%
3)

Weight 20 kg
3
/h
SK BUS system 1 3124.100 295
Condensate hose 1 3301.612 3301.612 303
1)
2)
3)
1)
3375.104
1)
Page
Thermostat
Basic controller
Pre-fuse T 4.0 A
2)

Duty cycle 100%
3)

Weight 56 kg
3
/h
SK BUS system 1 3124.100 295
Condensate hose 1 3301.612 3301.612 303
1)
2)
3)
Rittal Sweden
RITTAL Scandinavian ab
Rittalgatan 1 SE-262 73 ngelholm
Phone: +46 (431) 44 26 00
Fax: +46 (431) 44 26 44
E-mail: [email protected] www.rittal.se
Cold Plate
Recooling systems page 264 Accessories for climate control page 291
Liquid-cooled partial
mounting plate with drilling
surface and T channel
Whole surface can be used by
the customer for own tapped
holes (blind holes) to a maxi-
mum drilling depth of 12 mm.
Alternatively, drive units may be
secured to the T channel
depending on the version.
Design:
Press-fitted copper or stain-
less steel tubes, dependent
on the application, in closed
recooling systems or existing
(open) water infrastructure.
Cooling water connection:
G
1
/4, anti-twist
Supply includes:
Mounting accessories for
system integration into TS 8.
Accessories:
Quick-action vent valve,
see page 263.
Accessories for fluid distribu-
tor connection, see page 263.
TS punched section with
mounting flange 17 x 73 mm
for the outer mounting level,
see page 459.
Recooling systems for closed
cooling circuits,
see from page 264.
System attachment
SK 8616.700, see page 263.
Further technical information
is available at www.rittal.com
Detailed drawing:
Rittal Spain
RITTAL Disprel S.A.
Mas Baiona, 40
Polgono Industrial Can Roqueta
08202 Sabadell (Barcelona)
Phone: +34 937 001 300
Fax: +34 937 001 301
E-mail: [email protected] www.rittal.es
Cold Plate incl. T channel for frequency converters
Model No. SK 8616.602 8616.622 8616.802 8616.822
For installation in
Enclosure width mm 600 600 800 800
Enclosure depth (side) mm 600 600 800 800
Dimensions mm
W
H
D
499
399
20
499
399
20
699
399
20
699
399
20
Output
1)
2500 W 2500 W 3000 W 3000 W
Material CU VA CU VA
Packs of 1 1 1 1
1)
At 25C medium inlet temperature, Cold Plate surface temperature 50C, medium flowrate = 200 l/h, surface roughness: 1.2 m.
Special sizes available on request.
Q
.
Accessories
Cold Plate
Fluid distribution manifold
For the connection of up to 4 Cold Plate units.
Supply includes:
2 fluid distribution manifold blocks
(inlet and return)
Screw plugs G1/4, G3/8
Connector sleeves G1/2
Seals
Accessories:
Flexible hose, see page 263.
Also required:
Quick-action vent valve, see page 263.
1 set 8616.750
Flexible hose
For connection of the Cold Plate to a fluid distribu-
tion manifold or direct fluid connection.
Supply includes:
2 flexible hoses G1/4
Seals
Packs of
Length
mm
Material Model No. SK
1 set 500 CU 8616.772
1 set 1000 CU 8616.773
1 set 500 VA 8616.760
1)
1 set 1000 VA 8616.761
1)
1)
Quick-action vent valve
To vent the complete Cold Plate system.
Easily mounted on the fluid distribution manifold.
Supply includes:
Quick-action vent valve G3/8
Seal
1 8616.762
System attachment
for frequency converters
For mounting frequency converters on the
Cold Plate.
Supply includes:
Wire clamp system
T-slot blocks
For the attachment
of frequency converters
Packs
of
Model No.
SK
with all-round clamping surface 1 8616.700
with side clamping surfaces 1 8616.710
with clamping surfaces top
and bottom
1 8616.720
Chillers for water
Air/water heat exchangers From page 252 Overflow valve Page 304 Cooling medium Page 305
Technical design:
Compact, modular layout of
the refrigeration components
With RiNano coating
Pump to convey the medium
Precise temperature control,
based on microprocessor
technology
Collective fault signal with
floating contact
Colour:
RAL 7035
IP 44 (electrics)
Supply includes:
Recooling system wired ready
for connection
Multi-lingual documentation
Functional diagram and
wiring plans
Approvals:
Layout diagram:
Characteristic curves of pump:
Other options:
TopTherm, cooling output 1/1.5 kW
Model No. SK 3318.600 3318.610 3319.600 3319.610 Page
Dimensions mm
W
H
D
600
400
430
Cooling output at
Tw = 10C/Tu = 32C
Tw = 18C/Tu = 32C
0.8 kW/0.9 kW
1.0 kW/1.1 kW
1.2 kW/1.3 kW
1.5 kW/1.7 kW
Power consumption 0.63 kW/0.78 kW 0.85 kW/1.05 kW
Pre-fuse T 10 A
Refrigerant R134a
Number of cooling circuits 1
Temperature range
Environment +15C to +43C
Liquid media +10C to +30C
Pump capacity See characteristic curve of pump
Design Pressure-sealed Open Pressure-sealed Open
Tank Made from PP plastic Made from PP plastic
Tank capacity 2.5 l 2.5 l
Water connections
1
/2 internal thread
Weight 48 kg 51 kg
Air throughput of fans 900 m
3
/h
Temperature control Microcontroller control (factory setting +20C)
Metal filters 1 3286.510 3286.510 3286.510 3286.510 300
Customised solutions and technical modifications available on request.
We reserve the right to make technical modifications.
Chillers for water
TopTherm, cooling output 3/4.5/6 kW
Model No. SK 3320.600 3334.600 3334.660
2)
Page
Rated operating voltage V, Hz 400, 3~, 50/60/460, 3~, 60
1)

Dimensions mm
W
H
D
602
676
645
602
1050
645
Cooling output at
Tw = 10C/Tu = 32C
Tw = 18C/Tu = 32C
2.7 kW/3.0 kW
3.0 kW/3.4 kW
3.9 kW/4.7 kW
4.5 kW/5.4 kW
4.8 kW/5.2 kW/5.2 kW
6.0 kW/6.6 kW/6.6 kW
Power consumption 1.72 kW/1.95 kW 2.00 kW/2.51 kW 4.3 kW/5.1 kW/5.1 kW
Rated current max. 3.8 A/4.6 A/3.9 A 4.9 A/5.9 A/5.0 A 8 A/9.7 A/8 A
Pre-fuse T 10 A 16 A
Refrigerant R134a
Temperature range
Tank Made from PP plastic
Tank capacity 30 l
Water connections
1
/2 internal thread
3
/4 internal thread
Weight (empty) 88 kg 94 kg 125 kg
3
/h 2200/2500 m
3
/h
Accessories
Metal filters
3286.520 3286.520 3286.510
300
Packs of 1 1 2
1)
Supports multiple voltages without rewiring.
2)
Integral fill level display.
Special voltages and technical modifications available on request.
Rittal South Korea
RITTAL Co., Ltd.
Seoul Head Office
3rd Floor Asaan Venture Tower B/D
315-6 Yangjae-Dong
Seocho-Gu Seoul 137-896 Korea
Phone: +82 (0)2-577-6525
Fax: +82 (0)2-577-6526
E-mail: [email protected] www.rittal.co.kr
Chillers for water
Air/water heat exchangers From page 252 Overflow valve Page 304 Cooling medium Page 305
Technical design:
Compact, modular configura-
tion of the cooling compo-
nents with integral water tank
With RiNano coating
Pump to convey the medium
Precise temperature control,
based on microprocessor
technology
Open system with tank
Collective fault signal with
floating contact
Colour:
RAL 7035
IP 44 (electrics)
Supply includes:
Recooling system wired ready
for connection
wiring plans
Approvals:
Layout diagram:
Other options:
TopTherm, for wall mounting, cooling output 1/2.5/4 kW
Model No. SK 3360.100 3360.250 3360.470 Page
Rated operating voltage V, Hz 400, 3~, 50/60/460, 3~, 60
1)
Dimensions mm
W
H
D
400
950
310
400
1580
290
500
1580
390
Cooling output at
Tw = 10C/Tu = 32C
Tw = 18C/Tu = 32C
0.8 W/0.9 kW
1.0 kW/1.1 kW
2.1 kW/2.3 kW
2.5 kW/2.8 kW
3.3 kW/3.7 kW
4.0 kW/4.5 kW
Power consumption 0.7 kW/0.76 kW 1.55 kW/2.0 kW 1.85 kW/2.74 kW
Pre-fuse T 10 A
Refrigerant R134a
Temperature range
Tank Plastic
Tank capacity 5 l 10 l 15 l
Water connections
Quick-release coupling
(counterpart included in accessory bag)
3
/4 internal thread
3
/h 710 m
3
/h 2000 m
3
/h
Filter mat 1 3286.400 3286.400 3286.400 299
Metal filters 1 3286.410 3286.410 3286.410 300
1)
Supports multiple voltages without rewiring.
Chillers for water
Climate control accessories Page 291
Benefits:
Modular design
Small footprint
Convenient servicing
High reliability thanks to
standard water bypass
One version for two
frequencies = international
compatibility
Series product available from
stock
Fast delivery, as pre-assem-
bled modules can simply be
combined into a recooling
system
Colour:
RAL 7035
IP 44
Supply includes:
Fully wired unit ready for
connection with side panels
and door.
Layout diagram:
Other options:
TopTherm, cooling output 8 40 kW
Model No. SK 3335.590 3335.600 3335.610 3335.620 3335.630 3335.640 3335.650 3335.660 Page
Rated operating voltage V, Hz 400, 3~, 50 Hz/460, 3~, 60 Hz
Dimensions mm
W
H
D
805
1600
805
805
2000
805
1205
2000
805
1605
2000
805
2405
2000
805
Cooling output
1)

at Tw = 10C/Tu = 32C
6.5/7.6 kW 6.5/7.6 kW 10.3/11.3 kW 13.8/15.2 kW 16.6/18.7 kW 21.6/23.8 kW 27.6/30.4 kW 33.5/37.5 kW
Cooling output
1)

at Tw = 18C/Tu = 32C
8/8.6 kW 8/8.6 kW 12/13.1 kW 16/17.6 kW 20/21.8 kW 25/27.6 kW 32/35.2 kW 40/44 kW
Power consumption max. kW 3.4/4.0 3.4/4.0 5.9/6.4 6.7/8.0 8.0/9.9 10.5/12.9 13.5/15.9 16.0/19.8
Rated current max. A 6.4/6.0 6.4/6.0 8.2/9.5 11.1/11.3 15.9/13.9 20.3/20.7 22.2/22.6 31.7/31.5
Refrigerant R410A
Number of cooling circuits 1 2
Temperature range environment +10C to +43C
Temperature range water +7C to +25C
Pump capacity at 2.5 bar (l/min.)
50/60 Hz
35/70 30/85 50/140 60/40 (at 60 Hz 3.7 bar)
Tank capacity l 80 170
Water connections 1 1
1
/4
Weight (empty) kg 245 250 270 325 425 425 580 940
Temperature control Microcontroller cotnrol (factory setting +18C, differential value control also possible)
Metal filters 1 3286.550 3286.550 3286.530 3286.530 3286.540 3286.540 3286.530
2)
3286.540
2)
300
Levelling feet 4 7493.100 7493.100 7493.100 7493.100 7493.100 7493.100 7493.100 7493.100 371
Levelling feet with
vibration dampening
4 7493.230 7493.230 7493.230 7493.230 7493.230 7493.230 7493.230 7493.230 373
front and rear
100 mm 8601.805 8601.805 8601.805 8601.805 8601.200 8601.200 8601.805
2)
8601.200
2)
361
200 mm 8602.805 8602.805 8602.805 8602.805 8602.200 8602.200 8602.805
2)
8602.200
2)
361
Base/plinth trim panels,
side
100 mm 8601.085 8601.085 8601.085 8601.085 8601.085 8601.085 8601.085 8601.085 362
200 mm 8602.085 8602.085 8602.085 8602.085 8602.085 8602.085 8602.085 8602.085 362
Cooling
medium
Canister
10 l 3301.960 3301.960 3301.960 3301.960 3301.960 3301.960 3301.960 3301.960 305
25 l 3301.965 3301.965 3301.965 3301.965 3301.965 3301.965 3301.965 3301.965 305
Barrel 200 l 3301.967 3301.967 3301.967 3301.967 3301.967 3301.967 3301.967 3301.967 305
1)
Without pump heat losses.
2)
2 packs. We reserve the right to make technical modifications.
Chillers for water
Air/water heat exchangers from page 252 Climate control accessories Page 291 Cooling medium Page 305
Technical design:
Robust industrial standard
Variable air routing is
possible via the l/h or r/h
side panel
Floating contact for collective
fault signal
Colour:
RAL 7035
IP 44 (electrics)
Supply includes:
Recooling system
wired ready for connection
wiring plans
Accessories:
Metal filter mats
Castors
Bypass valve
on request
Approvals:
Layout diagram:
Other options:
In floor-standing enclosure, cooling output 2.1 to 7.7 kW
Model No. SK 3336.100 3336.200 3336.300 3336.500 3336.600 3336.650
Rated operating voltage V, Hz 400, 3~, 50
Dimensions mm
W
H
D
470
725
540
485
965
650
595
1180
800
Cooling output at
Tw = 10C/Tu = 32C
Tw = 18C/Tu = 32C
1.7 kW
2.1 kW
2.1 kW
2.6 kW
2.3 kW
3.4 kW
3.6 kW
5.0 kW
4.8 kW
6.2 kW
5.2 kW
7.7 kW
Power consumption 1.5 kW 1.7 kW 2.3 kW 2.9 kW 3.7 kW 3.9 kW
Rated current max. 3.4 A 3.0 A 4.2 A 5.5 A 6.2 A 7.3 A
Refrigerant R134a
Temperature range
Tank Made from stainless steel 1.4301 (AISI 304)
Water connections
3
/4 internal thread 1 internal thread
3
/h 1250 m
3
/h 1785 m
3
/h 3140 m
3
/h
Temperature control Electronic control with digital display (factory setting +18C)
Special voltages, other frequencies, and technical modifications available on request.
Chillers for water
In floor-standing enclosure, cooling output 10 to 25 kW
In floor-standing enclosure, cooling output 32 to 59 kW
Model No. SK 3336.700 3336.710 3336.720 3336.730 3336.740 3336.750
V, Hz
400, 3~, 50/460, 3~, 60
Dimensions mm
W
H
D
615
1178
1160
715
1178
1360
Cooling output at
Tw = 10C/Tu = 32C
Tw = 18C/Tu = 32C
8.3/10.4 kW
10.0/12.6 kW
11.9/15.5 kW
14.4/18.7 kW
13.5/16.6 kW
16.3/20.1 kW
15.0/18.1 kW
18.5/22.4 kW
17.0/20.7 kW
20.9/25.4 kW
20.6/26.4 kW
25.2/32.3 kW
Power consumption 3.8 kW 4.8 kW 5.3 kW 6.4 kW 7.1 kW 13.1 kW
Rated current max. 10.6 A 13.1 A 14.1 A 16.2 A 18.2 A 23.7 A
Refrigerant R407C
Temperature range
1)

Pump capacity See characteristic curve
Tank capacity 60 l 100 l
Water connections 1 internal thread
3
/h 10880 m
3
/h
1)
SK 3336.720 and SK 3336.750 +15C to +40C at 60 Hz.
Model No. SK 3339.100 3339.200 3339.250 3339.280
V, Hz
400, 3~, 50/460, 3~, 60 400, 3~, 50
Dimensions mm
W
H
D
815
1400
1560
1000
1800
2000
Cooling output at
Tw = 10C/Tu = 32C
Tw = 18C/Tu = 32C
26.2/31.4 kW
32.0/38.4 kW
29.6/35.5 kW
36.2/43.5 kW
40.0 kW
46.7 kW
52.0 kW
59.0 kW
Power consumption 18.3 kW 18.6 kW 20.6 kW 36.8 kW
Rated current max. 29.2 A 30.7 A 36.8 A 41.1 A
Refrigerant R407C
Temperature range
Environment +15C to +43C +15C to +40C
Pump capacity See characteristic curve
Tank capacity 150 l 220 l
Water connections 1
1
/4 internal thread 1
1
/2 internal thread
Weight 260 kg 300 kg 680 kg 740 kg
3
/h 32000 m
3
/h
270
271
IT cooling
TopTherm for office and IT applications ............... 1100/3000 W..............246
Chillers for IT cooling
Chillers for IT cooling.............................................. 15 123 kW..............272
Chillers for IT cooling............................................ 155 481 kW..............273
CRAC system
CRAC system CW ............................................ 27.8 137.4 kW..............274
CRAC system DX ............................................... 19.2 56.2 kW..............276
Aisle containment
Liquid Cooling Package
TopTherm LCP Rack CW and DX ........................... up to 60 kW..............279
TopTherm LCP Inline CW and DX........................... up to 60 kW..............280
TopTherm LCP T3+ CW.......................................... up to 25 kW..............281
TopTherm LCP Passive CW............................................. 20 kW..............282
Accessories...............................................................................................283
Climate control accessories Page 291
Application:
Especially for cooling IT applica-
tions, such as LCP or air/water
heat exchangers. Safety-rele-
vant features such as redundant
speed-controlled pumps, com-
pressors or buffer stores are the
distinguishing features of these
atmospherically sealed systems.
Technical design:
Compact design with control
components in the front and
air intake via both side pan-
els, air outlet upwards.
Pressure-sealed system
Digital thermostat for tempera-
ture control with setpoint and
actual value display
Monitoring interface with
Rittal CMC II supported.
Flow monitor
IP 54
Supply includes:
Chiller wired ready for con-
nection
wiring plans
Options:
Free cooling may be inte-
grated from 67 kW.
Please follow the instructions!
Buffer store for separate siting
Emergency cooling with
mains water infeed
Integral bypass
Special voltages
Note:
Technical deviations in terms
of cooling output, dimensions
or weight are possible for unit
types with free cooling.
Layout diagram:
Cooling output 15 to 124 kW
Model No. SK 3232.700 3232.710 3232.720 3232.730 3232.740 3232.750 3232.760 3232.770 3232.780 3232.790
Dimensions mm
W
H
D
810
1542
1560
810
1542
1560
810
1542
1560
1000
1780
2000
1100
1606
2450
1100
1606
2950
1100
1606
2950
1100
1606
2950
1100
1875
2950
1100
1875
2950
Cooling output
1)
15 kW 24 kW 36 kW 48 kW 67 kW 77 kW 88 kW 99 kW 117 kW 124 kW
Power consumption 6.9 kW 9.7 kW 14.6 kW 21 kW 21 kW 24 kW 26 kW 29 kW 36 kW 41 kW
Rated current max. 23.0 A 25.0 A 37.0 A 46.5 A 52.2 A 59.2 A 64.2 A 69.2 A 84.1 A 89.1 A
Refrigerant R407C R410A
Pmax. cooling circuit 28 bar 45 bar
Temperature range
Environment 20C to +43C
Pump capacity 60 l/min. 120 l/min. 240 l/min. 500 l/min.
Pump pressure 2.5 bar
Number of cooling circuits 1 2
Tank with 10 mm condensate insulation Steel
Tank capacity 48 l 100 l 300 l 500 l
Water connections 1 1
1
/4 2 2
1
/2
Operating weight 375 kg 390 kg 480 kg 710 kg 831 kg 896 kg 906 kg 912 kg 1119 kg 1123 kg
Air throughput of fans m
3
/h 10880 14000 18000 22000 27000 34100
1)
The performance data varies according to the option package chosen, and should be taken from the IT chiller configurator (see Internet).
Cooling output 155 to 481 kW
Model No. SK 3232.800 3232.810 3232.820 3232.890 3232.830 3232.840 3232.850 3232.860 3232.870 3232.880
Dimensions mm
W
H
D
1100
1875
2950
1100
1875
2950
1100
1875
3950
1500
1975
4350
2200
2450
3400
2200
2450
3400
2200
2450
3400
2200
2450
4250
2200
2450
4250
2200
2450
4250
Cooling output
1)
155 kW 172 kW 196 kW 235 kW 262 kW 291 kW 326 kW 387 kW 430 kW 481 kW
Power consumption 47 kW 52 kW 60 kW 70 kW 80 kW 93 kW 106 kW 121 kW 141 kW 159 kW
Rated current max. 108 A 120 A 127 A 149 A 181 A 203 A 225 A 293 A 307 A 336 A
Refrigerant R410A
Pmax. cooling circuit 45 bar
Temperature range
Environment 20C to +43C
Pump capacity 500 l/min. 500 l/min. 810 l/min. 1200 l/min.
Pump pressure 2.5 bar
Tank with 10 mm condensate insulation Steel
Water connections 2
1
/2 3 4
Operating weight 1308 kg 1321 kg 1489 kg 1933 kg 2546 kg 2693 kg 2843 kg 3148 kg 3354 kg 3576 kg
Colour RAL 9002
Air throughput of fans m
3
/h 32600 50000 49000 72800 71500 70200 106200 104100 102000
1)
The performance data varies according to the option package chosen, and should be taken from the IT chiller configurator (see Internet).
Rittal Austria
RITTAL Schaltschrnke Gesellschaft m.b.H.
Laxenburger Strae 246a A-1239 Wien
Phone: +43 (0) 5 99 40-0
Fax: +43 (0) 5 99 40-99 0
E-mail: [email protected] www.rittal.at
CRAC system CW
Chillers for IT cooling Page 272 Liquid Cooling Package Page 279
Application and mode
of operation:
The CRAC system draws warm
waste air from the top of your
data centre, cools it using water
in a closed heat exchanger, and
blows the cooled, filtered sup-
ply air into the raised floor with
overpressure.
The heated cooling water is
cooled in an external recooling
system outside of the building.
Benefits:
Broad output range, suitable
for use with a wide range of
cooling media.
The unit supports optimum
integration of both hardware
and software.
Optimum energy and space
efficiency thanks to intelligent
design features, such as the
slanted heat exchanger and
base-integrated fan.
Frame based on the popular
TS 8 system.
Equipment:
User-friendly, high-quality con-
troller with an extensive range
of functions and connectivity.
Space-saving, readily acces-
sible, high-efficiency fan.
Flow and energy-optimised
special heat exchanger with
a generous safety factor.
Colour:
RAL 7035
Water inlet,
condensate discharge,
humidifier inlet
Electrical connection
Water return
B
T
H
2
H
1
1
2
3
1
2
3
Base unit
Fan unit in base
Top piece
Model No. SK
3301.620 3301.660 3301.830 3301.870
Dimensions mm
W (B)
H1
D (T)
1100
1950
650
1100
1950
850
1800
1950
850
2600
1950
850
Connection voltage V/Ph/Hz 400/3/50 400/3/50 400/3/50 400/3/50
Supporting structure with fan
Model No. SK
3300.310 3300.320 3300.330 3300.340
No. of fans Quantity 1 1 2 3
Height of supporting structure mm
1)
H2 500 550 550 550
Min. raised floor height mm 350 350 350 350
1)
Other supporting structure heights available on request.
CRAC system CW
Base unit
Fan unit
Options
Model No. SK 3301.620 3301.660 3301.830 3301.870
Rated volumetric flow
Air volume m
3
/h 6000 11000 22000 33000
External compression Pa 20 20 20 20
Support area m
2
0.72 0.94 1.53 2.21
Weight kg 340 385 585 843
Cooling cold water 7C/12C and air inlet 24C/50% relative humidity
Cooling output, total kW 27.8 45.7 90.2 137.4
Cooling output, sensitive kW 23.4 39.8 79.4 119.5
SHR
1)
0.84 0.87 0.88 0.87
Volumetric flow of medium m
3
/h 4.78 7.85 15.49 23.6
Cooler pressure loss kPa 33.4 39 37.6 37.5
Valve pressure loss kPa 22.8 24.1 38.4 34.8
Connection Rp 1 Rp 1 1/4 Rp 1 1/2 Rp 2
Cooling cold water 10C/15C and air inlet 26C/45% relative humidity
SHR
1)
1 1 1 1
Volumetric flow of medium m
3
/h 3.94 6.72 13.3 20.2
Cooler pressure loss kPa 23.4 29.1 28.2 27.8
Valve pressure loss kPa 15.5 17.6 28.3 25.5
Connection Rp 1 Rp 1 1/4 Rp 1 1/2 Rp 2
Filter in intake
Design Cassette filter
Filter class to DIN EN 779 G4 G4 G4 G4
Noise data
Sound power level, intake end dB (A) 69 74 77 79
Sound power level, discharging end dB (A) 79 82 85 87
Enclosure radiation dB (A) 55 60 63 65
Sound pressure level in empty space (2 m distance) dB (A) 57 62 65 67
1)
SHR = Sensible Heat Ratio. We reserve the right to make technical modifications in line with progress.
Design EC motor, directly driven, free-running
Qty. Quantity 1 1 2 3
Power consumption, total kW 0.6 1.4 3.1 4.6
Max. current rating A 1.5 4.6 9.2 13.8
Steam humidification
Design Electrode steam humidifier
Max. steam output kg/h 8 8 15 15
Max. power consumption kW 6 6 11.3 11.3
Water inlet connection Inches G 1/2 G 1/2 G 1/2 G 1/2
Water discharge connection mm 40 40 40 40
Electric heater
Design Bare-tube heater, permanently controlled
Max. thermal output kW 4.5 7.5 15 22.5
Energy-saving extractor plenum
For top-mounting on CRAC systems 3300.290 3300.291 3300.292 3300.293
CRAC system DX
Chillers for IT cooling Page 272 Liquid Cooling Package Page 279
of operation:
The air-cooled DX units with
direct evaporation discharge the
heat to the external air via an air-
cooled condenser installed out-
side of the building. The climate
control enclosure has one, two
or three compressors, depend-
ing on size, which are com-
bined into one cooling circuit.
For this reason, connection to
the air-cooled condenser is via
just one refrigerant line.
Benefits:
Broad output range, suitable
for use with a wide range of
cooling media.
The unit supports optimum
integration of both hardware
and software.
Optimum energy and space
efficiency thanks to intelligent
design features, such as the
slanted heat exchanger and
base-integrated fan.
Frame based on the popular
TS 8 system.
Equipment:
User-friendly, high-quality con-
troller with an extensive range
of functions and connectivity.
Space-saving, readily acces-
sible, high-efficiency fan.
Flow and energy-optimised
special heat exchanger with
a generous safety factor.
Colour:
RAL 7035
Refrigerant pressure line,
condensate discharge,
humidifier inlet
Electrical connection
Refrigerant fluid line
B
T
H
2
H
1
1
2
3
1
2
3
Base unit
Fan unit in base
Condenser unit
Top piece
Model No. SK
3300.510 3300.560 3300.710 3300.760
Dimensions mm
W (B)
H1
D (T)
1100
1950
850
1100
1950
850
1400
1950
850
1800
1950
850
Supporting structure with fan
Model No. SK
3300.360 3300.320 3300.370 3300.330
Height of supporting structure mm
1)
H2 500 550 550 550
Min. raised floor height mm 350 350 350 350
1)
Other supporting structure heights available on request.
Model No. SK
3300.353 3300.354 3300.355 3300.356
No. of fans Quantity 1 2 2 2
Max. volumetric flow m
3
/h 8500 12400 18000 18400
CRAC system DX
Base unit
Fan unit
Condenser unit
Options
Model No. SK 3300.510 3300.560 3300.710 3300.760
Rated volumetric flow
Air volume m
3
/h 6000 8500 12500 16000
External compression Pa 20 20 20 20
Support area m
2
0.94 0.94 1.19 1.53
Weight kg 455 505 585 871
Cooling condensation temperature 45C and air inlet 24C/50% relative humidity
Design Scroll compressor
No. of compressors Quantity 1 2 3 3
SHR
1)
0.95 0.90 0.89 0.92
Max. operating temperature A 13.1 25.6 38.4 39.3
Filter in intake
Design Cassette filter
Filter class to DIN EN 779 G4 G4 G4 G4
Noise data
Sound power level, intake end dB (A) 69 69 77 72
Sound power level, discharging end dB (A) 79 76 84 79
Enclosure radiation dB (A) 54 56 62 59
Sound pressure level in empty space (2 m distance) dB (A) 57 57 64 59
1)
SHR = Sensible Heat Ratio. We reserve the right to make technical modifications in line with progress.
Design EC motor, directly driven, free-running
Qty. Quantity 1 1 1 2
Design Axial fan condenser
Condenser output kW 27 38 49 71
Max. power consumption kW 0.67 1.28 1.34 1.34
Max. current rating A 3.3 6 6.0 6.6
Max. noise level in empty space (5 m distance) dB (A) 56 60 59 59
Dimensions mm Width (B1 + B2) 1415 1420 2130 2680
Weight kg 109 132 160 217
Steam humidification
Design Electrode steam humidifier
Max. steam output kg/h 8 8 8 15
Max. power consumption kW 6 6 6 11.3
Water inlet connection Inches G 1/2 G 1/2 G 1/2 G 1/2
Water discharge connection mm 40 40 40 40
Electric heater
Design Bare-tube heater, permanently controlled
Max. thermal output kW 4.5 7.5 7.5 15
Energy-saving extractor plenum
For top-mounting on CRAC systems 3300.294 3300.295 3300.296 3300.297
1
1
2
0 B
1
B
1
B
1
B
2
1
1
0
5
5
6
3
B
1
B
1
B
1
B
2
1
6
1
5
Design
Vertically blowing
Design
Horizontally blowing
Aisle containment
TopTherm LCP Passive CW From page 282
of operation:
Aisle containment is a combina-
tion of door and roof compo-
nents which facilitate consistent
separation of the hot and cold
air in the data centre. Such
separation is pivotal to saving
energy and increasing the effi-
ciency of the available climate
control technology. Depending
on the application, aisle contain-
ment may be used with CRAC
systems or TopTherm LCP Inline
CW and DX as hot or cold aisle
containment.
Benefits:
Increased energy efficiency
and performance capability of
climate control.
Superior output density is
facilitated, thanks to guaran-
teed cold air supply.
Easily installed and retrofitted,
as it is fully compatible with
the TS 8 enclosure system.
An inexpensive way to boost
the performance of your exist-
ing plant, lengthening the in-
vestment cycle until a replace-
ment needs to be purchased.
Equipment:
Slimline door element with
viewing window, sliding door
Stable roof elements in a com-
posite metal with a high level
of light permeability
Where required, safety glass
may also be used
Note:
Other size variants and individu-
ally modified systems available
on request.
1
2
0
0
2
0
0
0
6
0
0
/8
0
0
Element Roof element Door element
Position Start/end Centre
Model No. SK 3300.270 3300.280 3300.170 3300.180 3300.160
Width of element
(identical to enclosure width) mm
600 800 600 800
Width of cold aisle mm 1200 1200 1200 1200 1200
Height of cold aisle mm 2000
Accessories for climate control Page 291 Chillers for IT cooling Page 272 Server enclosures Page 92
Benefits:
Maximum energy efficiency
thanks to EC fan technology
and IT-based control
Minimal pressure loss at the
air end, which in turn mini-
mises the power consump-
tion of the fans
Optimum adaptability thanks
to dynamic, continuous con-
trol of the cold water volume
flow
By using high water inlet
temperatures, the proportion
of indirect free cooling is
increased, which in turn
reduces operating costs
Thanks to six modular,
box-type plug-in fan units,
the cooling output can be
adapted to actual require-
ments
The box-type plug-in fan units
are configurable as n+1
redundancy
Standard 3-phase connection
for electrical redundancy
With redundant temperature
sensor integrated at the air
end as standard
The separation of cooling and
rack prevents water from pen-
etrating the server enclosure
Up to 60 kW cooling output on
a footprint of just 0.36 m
The low weight means a mini-
mal load area
Touchscreen display may be
retrofitted
Monitoring:
Monitoring of all system-relevant
parameters such as:
Server air intake temperature
Server waste air temperature
Water inlet/return temperature
Water flow
Cooling output
Fan speed
Leakage
Optional sensors
Direct connection of the unit
via SNMP/Ethernet
Integration into RiZone
Application and mode of
operation:
The LCP draws in the air at the
sides at the rear of the server
enclosures, cools it using high-
performance compact impel-
lers, and blows the cooled air
back into the front part of the
server enclosure at the sides.
Colour:
RAL 7035
IP 40 to IEC 60 529
TopTherm LCP rack CW and DX
Design CW CW CW DX Page
Cooling medium Water (for specifications see Internet) Refrigerant R410a
Model No. SK 3311.130 3311.230 3311.260 3311.110
230, 1~, 50/60
400, 3~, 50/60
230, 1~, 50/60
400, 3~, 50/60
230, 1~, 50/60
400, 3~, 50/60
230, 1~, 50/60
400, 3~, 50/60
Dimensions mm W x H x D 300 x 2000 x 1000 300 x 2000 x 1200 300 x 2000 x 1200 300 x 2000 x 1000
Usable U 42 42 42 42
Useful cooling output Up to 30 kW Up to 30 kW Up to 60 kW Up to 10 kW
Duty cycle 100%
Electrical connection Connection cable
Temperature control
Linear fan control
Two-way control valve
Fans may be exchanged with the system operational
EC fan
Also required Packs of
Condenser unit 1 3311.310 283
Accessories
Fan module 1 3311.010 3311.010 3311.010 3311.010
Touchscreen display, colour 1 3311.030 3311.030 3311.030 3311.030 283
Connection hose, top 1 3311.040 3311.040 3311.040 3311.040 283
Connection hose, bottom 1 3311.050 3311.050 3311.050 3311.050 283
Accessories for climate control Page 291 Chillers for IT cooling Page 272 Server enclosures Page 92 Aisle containment Page 278
Benefits:
Maximum energy efficiency
thanks to EC fan technology
and IT-based control
Minimal pressure loss at the
air end, which in turn mini-
mises the power consump-
tion of the fans
Optimum adaptability thanks
to dynamic, continuous con-
trol of the cold water volume
flow
By using high water inlet
temperatures, the proportion
of indirect free cooling is
increased, which in turn
reduces operating costs
Thanks to six modular,
box-type plug-in fan units,
the cooling output can be
adapted to actual require-
ments
The box-type plug-in fan units
are configurable as n+1
redundancy
Standard 3-phase connection
for electrical redundancy
With redundant temperature
sensor integrated at the air
end as standard
The separation of cooling and
rack prevents water from pen-
etrating the server enclosure
Up to 60 kW cooling output on
a footprint of just 0.36 m
The low weight means a mini-
mal load area
Touchscreen display may be
retrofitted
Monitoring:
Monitoring of all system-relevant
parameters such as:
Server air intake temperature
Server waste air temperature
Water inlet/return temperature
Water flow
Cooling output
Fan speed
Leakage
Optional sensors
Direct connection of the unit
via SNMP/Ethernet
Integration into RiZone
operation:
The LCP is designed for siting
within a bayed enclosure suite.
The hot air is drawn in from the
room or hot aisle at the rear of
the device and expelled at the
front into the cold aisle after
cooling.
The LCP achieves maximum
performance and efficiency in
conjunction with Rittal cold aisle
containment. With this product,
a raised floor is not necessary.
Colour:
RAL 7035
IP 40 to IEC 60 529
TopTherm LCP Inline CW and DX
Design CW CW DX Page
Cooling medium Water (for specifications see Internet) Refrigerant R410a
Model No. SK 3311.530 3311.560 3311.210
230, 1~, 50/60
400, 3~, 50/60
230, 1~, 50/60
400, 3~, 50/60
230, 1~, 50/60
400, 3~, 50/60
Usable U 42 42 42
Useful cooling output Up to 30 kW Up to 60 kW Up to 10 kW
Duty cycle 100%
Electrical connection Connection cable
Temperature control
Linear fan control
EC fan
Also required Packs of
Condenser unit 1 3311.310 283
Accessories
Front cover 1 3311.060 3311.060 3311.060 283
Fan module 1 3311.020 3311.020 3311.020
Touchscreen display, colour 1 3311.030 3311.030 3311.030 283
Connection hose, top 1 3311.040 3311.040 3311.040 283
Connection hose, bottom 1 3311.050 3311.050 3311.050 283
Benefits:
Error-tolerant, efficient cooling
of server racks with high ther-
mal loads
Fully redundant Two active
cooling circuits and two
switchable power circuits
ensure optimum fail-safeness
The built-in controllers are
capable of adapting all device
parameters automatically to
preserve the required climate
conditions
A separate decentralised
intelligence which automati-
cally recognises emergency
situations and responds
appropriately with the auto
load balancing and auto
recovery functions
Interfaces which facilitate
user-friendly operation and
monitoring via the network or
BSM systems
Optional:
Fully integrated fire detection
and extinguisher system
Automatic server enclosure
door opening
Various sensors
of operation:
The LCP draws in the air at the
sides at the rear of the server
enclosures, cools it using high-
performance compact impel-
lers, and blows the cooled air
back into the front part of the
server enclosures at the sides.
Colour:
RAL 7035
IP 40 to IEC 60 529
TopTherm LCP T3+ CW
Cooling medium Water (for specifications see Internet) Page
230, 1~, 50/60
400, 3~, 50/60
Usable U 42
Useful cooling output, redundant Up to 25 kW
Duty cycle 100%
Electrical connection C19/C20
Temperature control
Linear fan control
EC fan
Auto-load balancing
Auto-recovery
Accessories
Fan module 1 3311.010
Touchscreen display, colour 1 3311.030 283
Connection hose, top 1 3311.040 283
Connection hose, bottom 1 3311.050 283
Benefits:
High cooling output of 20 kW
in a minimal space
Easily exchanged for the
standard rear door of the
server enclosure
Retrofitting is not a problem
A door opening angle of 120
allows rear access to the
server enclosure and makes
assembly and configuration
inside the enclosure easier
The LCP does not require its
own fan, and therefore does
not need an integrated control
Maximum energy efficiency,
as there is no electrical power
consumption whatsoever
operation:
Air/water heat exchanger
mechanically integrated into a
rear door for server enclosures.
The 482.6 mm (19) equipment
built into the server enclosure
must have suitable airflow capa-
bilities in order to route the
heated waste air through the
heat exchanger rear door. The
waste air is cooled down to room
temperature. The heat energy
absorbed by the water is trans-
ported to the external cold water
supply, where it is cooled back
down to the required inlet tem-
perature.
Colour:
RAL 7035
Approvals:
Rittal China
RITTAL Electro-Mechanical Technology
(Shanghai) Co. Ltd.
No. 1658 Minyi Road Songjiang District
Shanghai, 201612
Phone: +86 (0) 21 5115 7799
Fax: +86 (0) 21 5115 7788
E-mail: [email protected] www.rittal.cn
TopTherm LCP Passive CW
Usable U 42
Useful cooling output Up to 20 kW
Accessories
Touchscreen display, colour
for LCP rack, inline, T3+
The display offers the opportunity of directly
monitoring key LCP functions and implementing
settings.
1 3311.030
Front cover
for LCP Inline CW and DX
The optional front cover ensures an even air
exhaust and reduces the air outlet speed,
thereby preventing draught effects.
1 3311.060
Condenser unit
The condenser unit is needed to operate the
refrigerant-based LCPs, and comprises the
external condenser, fan and inverter-controlled
compressor.
Refrigerant:
R410a
For LCP Packs of Model No. SK
SK 3311.110,
SK 3311.210
1 3311.310
Vertical shielding
To block the airflow on the left and right of the
482.6 mm (19) level, for enclosure height
2000 mm.
Material:
Cellular PU foam
Flame-inhibiting to UL 94 (HF1)
Length: 1900 mm
Self-adhesive on one side
For sealing
between
For
enclosure width
mm
Packs
of
Model No.
SK
Side panel and
482.6 mm (19)
level
600 1 3301.380
800 1 3301.390
LCP and
482.6 mm (19)
level
600 1 3301.370
800 1 3301.320
Connection hose,
bottom and top
Flexible connection hose, may be shortened,
including union nuts on both sides for connecting
the LCP to existing pipework.
For LCP Thread
Water
connection
from
Packs
of
Model No.
SK
SK 3311.130,
SK 3311.230,
SK 3311.260,
SK 3311.530,
SK 3311.560,
SK 3311.400,
SK 3311.110,
SK 3311.210
1
1
/4
Bottom 2 3311.050
Top 2 3311.040
Add-on cover
For height compensation with 2200 mm high
racks in conjunction with the LCP (H = 2000 mm).
Material:
Sheet steel
Surface finish:
Spray-finished
Colour:
RAL 7035
For LCP Packs of Model No. SK
SK 3311.130, ....110 1 3301.221
SK 3311.230, ....260,
SK 3311.530, ....560,
SK 3311.400, ....210
1 3301.421
284
285
For CS Toptec ..........................................................85/105 W/K..............286
For CS modular enclosures.............................................30 W/K..............287
Cooling units
For CS Toptec ....................................................... 1000/1600 W..............286
For CS modular enclosures..................................... 900/1500 W..............287
CS Toptec Page 185 Enclosure heaters Page 289
With sealing frame for universal
mounting on the CS Toptec in
3 positions: Internal, partial inter-
nal and external.
Material:
Enclosure: Aluminium
Surface finish:
Powder-coated, pure polyester
Colour:
RAL 7035
IP 55 to IEC 60 529 (internal
circuit to external circuit)
Air/air heat exchangers and cooling units for CS Toptec
Air/air heat exchangers Cooling units
Model No. CS 9776.102 9776.152 9776.500 9776.550
Installation Universal
DC 48 V
AC 230 V, 50/60 Hz
Enclosure dimensions mm
(including sealing frame and designer cover)
W
H
D
500 (550)
1000 (1050)
150 (175)
500 (550)
1000 (1050)
200 (225)
500 (550)
1000 (1050)
150 (175)
500 (550)
1000 (1050)
260 (285)
Minimum enclosure dimensions (mm) W x H 800 x 1200
to DIN 3168
L 35 L 35
L 35 L 50

1000 W/1150 W
650 W/700 W
1600 W/1750 W
1200 W/1250 W
Heater 400 W
Rated current max.
DC 4.2 A 4.5 A
AC 5.0 A/5.0 A 6.0 A/6.8 A
Start-up current max. 24.0 A/22.0 A 34.0 A/32.0 A
to DIN 3168
L 35 L 35
L 35 L 50

640 W/760 W
780 W/920 W
960 W/1170 W
1125 W/1310 W
Coolant R134a
Temperature range 33C to +65C 33C to +55C
unimpeded air flow
Internal/external
circuit fan
570 m
3
/h 1200 m
3
/h
600/625 m
3
/h
600/625 m
3
/h
880/950 m
3
/h
1000/1090 m
3
/h
Temperature control Comfort controller
1)
Comfort controller
1)
Comfort controller Comfort controller
Extended delivery times. Products are manufactured to order. The units are assembled and supplied connected to the Toptec enclosure.
1)
Setpoint settings may be altered via software.
QK
.
CS modular enclosures Page 186 Enclosure heaters Page 289
For roof mounting
With Comfort controller as stand-
ard
1)
and 400 W heater or con-
trol via thermostat.
Heat exchanger CS 9764.040
without Comfort controller.
Mounting frame:
Required for CS 9762.212.
For wall mounting
With Comfort controller
1)
and
400 W heater as standard.
For partial installation
With Comfort controller
1)
and
800 W heater as standard.
Installation options:
in the door or rear panel
in the side panel
Surface finish:
Powder-coated, pure polyester
Colour:
RAL 7035
IP 55 to IEC 60 529 (internal
circuit to external circuit)
1)
Units with Comfort controller.
The Comfort controller is
installed on the inside of the
cooling units, and is not acces-
sible from the outside.
Air/air heat exchangers and cooling units for CS modular enclosures
Air/air heat
exchangers
Cooling units
Model No. CS 9764.040 9762.212 9761.212 9768.152
Installation Roof-mounted Roof-mounted Wall-mounted
Partial internal
mounting
DC 48 V
AC 230 V, 50/60 Hz
Unit dimensions (mm) W x H x D 470 x 158 x 380 535 x 390 x 400 515 x 1170 x 152 400 x 1050 x 310
Minimum enclosure dimensions (mm) W x D 600 x 500 W x D 600 x 500 W x H 600 x 1200 W/D x H 600 x 1200
Specific thermal output 30 W/K
to DIN 3168
L 35 L 35
L 35 L 50

900 W/1020 W
720 W/780 W
900 W/1050 W
750 W/820 W
1500 W/1600 W
1250 W/1250 W
Heater 400 W 400 W 800 W
Rated current max.
DC 1.3 A
AC 3.1 A/4 A 3.2 A/4.2 A 5.8 A/6.7 A
Start-up current max. 10.6 A 10.8 A 19.0 A
to DIN 3168
L 35 L 35
L 35 L 50
460 W/570 W
520 W/655 W
605 W/790 W
690 W/880 W
940 W/1145 W
1045 W/1270 W
Temperature control Without
2)
Comfort controller Comfort controller Comfort controller
Coolant R134a 550 g 600 g 650 g
Permissible operating pressure p. max. 27 bar 24 bar 28 bar
unimpeded air flow
Internal/ external circuit fan 345 m
3
/h
570 m
3
/h
570 m
3
/h
880 m
3
/h
880 m
3
/h
850 m
3
/h
680 m
3
/h
Type of connection Plug panel Plug-in terminal strip
Material (enclosure) Aluminium/sheet steel / / / /
Accessories
Mounting frame 9765.051
Enclosure internal thermostat 3110.000
Extended delivery times. The partially internally mounted CS 9768.152 may be inserted directly. Cooling units are manufactured to order.
The units are assembled and supplied connected to the modular enclosure. Adaptations to other enclosure platforms are available on request.
2)
Customers may fit their own thermostat (SK 3110.000).
QK
.
288
Enclosure heaters
Supply includes:
PTC heater
Quick-connection terminal
Assembly parts
Note:
we recommend the enclo-
sure internal thermostat
SK 3110.000 or the digital
thermostat SK 3114.200 with
display (see accessories).
In order to prevent condensa-
tion on assemblies, hygrostat
SK 3118.000 (see accesso-
ries) is recommended to regu-
late heating.
In larger enclosures, even
heat distribution is best
achieved by installing several
low-output heaters.
The installation of heaters is
generally advisable, in order
to prevent condensation.
T
H
B
T
H
B
1 2
Without fan, continuous thermal output 10 150 W
With fan, continuous thermal output 250 800 W
Model No. SK 3105.310 3105.320 3105.330 3105.340 3105.350 3105.360 3105.370 Page
Dimensions mm
W (B)
H
D (T)
45
120
46
45
120
46
64
155
56
64
155
56
64
230
56
90
165
75
90
180
75
Rated operating voltage V, Hz 110 240 V, 50/60 Hz
Continuous thermal output at Tu = 10C 8 10 W 18 20 W 23 30 W 49 50 W 63 75 W 86 100 W 130 150 W
Pre-fuse T 2 A 2 A 4 A 4 A 4 A 4 A 4 A
Enclosure internal thermostat 1 3110.000 3110.000 3110.000 3110.000 3110.000 3110.000 3110.000 294
Hygrostat 1 3118.000 3118.000 3118.000 3118.000 3118.000 3118.000 3118.000 294
Digital temperature display/thermostat 1 3114.200 3114.200 3114.200 3114.200 3114.200 3114.200 3114.200 293
Model No. SK 3105.410 3105.380 3105.420 3105.390 3105.430 3105.400 Page
Dimensions mm
W (B)
H
D (T)
103
200
103
103
200
103
103
200
103
110 V,
50/60 Hz
230 V,
50/60 Hz
110 V,
50/60 Hz
230 V,
50/60 Hz
110 V,
50/60 Hz
230 V,
50/60 Hz
Continuous thermal output at Tu = 10C 250 W
1)
400 W
1)
800 W
1)

Pre-fuse T 4 A 4 A 6 A 6 A 10 A 6 A
Hygrostat 1 3118.000 3118.000 3118.000 3118.000 3118.000 3118.000 294
Digital temperature display/thermostat 1 3114.200 3114.200 3114.200 3114.200 3114.200 3114.200 293
1)
Thermal output with fan.
1
2
290
Air routing
Air duct system
for roof-mounted variants:
cooling units and air/water heat exchangers
It is possible to route the cold air directly to spe-
cific areas of the enclosure using the air duct
system. The risk of short circuits in the air cir-
culation due to self-ventilated installed devices is
therefore eliminated.
The dimensions of the shallow duct are
W x H x D 229 x 1500 x 29 mm, and can be
shortened to the required length.
Material:
Flame-resistant plastic to DIN 4102/B1
Supply includes:
Shallow duct, compensating hose.
Note:
Do not direct cold air straight at active compo-
nents. When using the ducting system, the per-
formance of the cooling unit may be reduced,
depending on the application in question.
Also required:
TS support strips, see page 462.
Accessories:
Deflector 90, see page 291.
Stopper, see page 292.
For unit Packs of Model No. SK
SK 3209. . . ./SK 3210. . . ./SK 3273. . . ./SK 3359. . . ./SK 3382. . . ./
SK 3383. . . ./SK 3384. . . ./SK 3385. . . .
1 3286.870
SK 3386. . . ./SK 3387. . . . 1 3286.970
Deflector, 90
for air duct system
For targeted air deflection at the end of the shal-
low channel.
Material:
1 3286.990
Air routing
Shallow air duct system
for roof-mounted variants:
cooling units and air/water heat exchangers,
to fit TS 8 enclosures from a width of 800 mm
and a depth of 600 mm.
It is possible to route the cold air directly to spe-
cific areas of the enclosure using the air duct
system. The risk of short circuits in the air cir-
culation due to self-ventilated installed devices is
therefore eliminated.
The dimensions of the shallow duct are
W x H x D 229 x 1500 x 29 mm, and can be
shortened to the required length.
Material:
Supply includes:
Shallow duct
Adaptor
Compensating piece
Deflector, 90
Note:
Do not direct cold air straight at active compo-
nents. When using the ducting system, the per-
formance of the cooling unit may be reduced,
depending on the application in question.
Also required:
Shallow duct extension SK 3286.860 to com-
pensate for the enclosure width and height.
TS support strips, see page 462.
Accessories:
Deflector 90, see page 291.
Stopper, see page 292.
For unit Packs of Model No. SK
SK 3209. . . ./SK 3210. . . ./SK 3273. . . ./SK 3383. . . ./SK 3384. . . ./
SK 3385. . . .
1 3286.850
Shallow duct extension
Extension kit for shallow air duct system
SK 3286.850 for width, depth or height length
extensions in TS 8 enclosures.
Material:
Supply includes:
Shallow duct 1500 mm
Connecting piece
1 3286.860
Stoppers
for roof-mounted cooling units
To cover unneeded cold air outlets in roof-
mounted cooling units.
Material:
Polyurethane foam
For units
Max. no. of
stoppers per unit
SK 3359. . . ./SK 3382. . . . 1 2 3286.780
SK 3209. . . ./SK 3210. . . ./SK 3273. . . ./SK 3383. . . ./
SK 3384. . . ./SK 3385. . . .
2 2 3286.880
SK 3386. . . ./SK 3387. . . . 1 2 3286.980
Max. 1 x
Max. 2 x
SK 3359. . . . /SK 3382. . . .
SK 3386. . . . /SK 3387. . . .
SK 3209. . . . /SK 3210. . . .
SK 3383. . . . /SK 3384. . . .
SK 3385. . . . /SK 3273. . . .
Air routing/control/regulation
Air diverter
For use with wall-mounted cooling units.
For targeted air routing of the cold air in a down-
ward direction.
Particularly well-suited for densely-packed electri-
cal components in the lower section of the enclo-
sure.
Material:
Sheet steel
For units Model No. SK
SK 3304. . . ./SK 3305. . . . 3213.310
SK 3328. . . ./SK 3329. . . . 3213.320
SK 3332. . . . 3213.330
1)

65
1)
External
air circuit
Internal
air circuit
1)
115 mm for SK 3213.330
Digital enclosure internal
temperature display and
thermostat
For installation in the enclosure door or wall.
2 voltage ranges for 100 230 V, 50/60 Hz
and 24 60 V (DC)
Depth: 100 mm
Three-digit, 7-segment display
Option of switching between C/F
Includes 1800 mm long NTC sensor
Two relay outputs as change-over contact
and normally open contact (max. contact load
230 V, 6 A)
Freely selectable switching difference
The freely adjustable setpoint values can be set
using the membrane keyboard at the front
Setting range: +5C to +55C
Display and switching accuracy +/ 2 K
The minimum and maximum recorded tempera-
tures are stored until it is next reset
1 3114.200
Special requirements can be accommodated on request.
temperature display and
thermostat
Integrated into a panel 1 U.
Including cable attachment for connection cable
and label holder.
2 voltage ranges for 100 230 V, 50/60 Hz
and 24 60 V (DC)
Depth: 100 mm
Three-digit, 7-segment display
Option of switching between C/F
Includes 1800 mm long NTC sensor
Two relay outputs as change-over contact
and normally open contact (max. contact load
230 V, 6 A)
Freely selectable switching difference
The freely adjustable setpoint values can be set
using the membrane keyboard at the front
Display and switching accuracy +/ 2 K
The minimum and maximum recorded tempera-
tures are stored until it is next reset
Colour:
RAL 7035
1 7109.035
Special requirements can be accommodated on request.
Control/regulation
Enclosure internal thermostat
Especially suitable for controlling fan-and-filter
units, heaters and heat exchangers, this thermo-
stat can also be used as a signal generator for
monitoring the enclosure internal temperature.
Bi-metal controller as a temperature-sensitive
element with thermal feedback.
Contact population: Single-pole change-over
contact as a quick-break contact.
Permissible contact load:
Cat. 5 3 (heating)
AC 10 (4)
1)
A,
DC = max. 30 W
Cat. 5 4 (cooling)
AC 5 (4)
1)
A,
DC = max. 30 W
1)
= inductive load at cos = 0.6
Weight: approx. 105 g
Dimensions: 71 x 71 x 33.5 mm
Switching difference: approx. 1 K 0.8 K.
Flexible mounting on a vertical or horizontal
35 mm support rail to EN 50 022, and snap
fastening in the TS/SE enclosure section or on
the mounting plate using the supplied adaptor.
Accessories:
Mounting plate TS with integral top-hat rail,
see page 470.
Rated operating voltage Model No. SK
230/115/60/48/24 V (AC)
3110.000
60/48/24 V (DC)
Hygrostat
The hygrostat switches on the heater and/or fan
when a preset relative humidity in the enclosure is
exceeded.
In this way, the relative humidity is raised above
the dew point, and condensation on assemblies
or electronic components is avoided.
Contact population: Single-pole change-over
contact as a quick-break contact.
Permissible contact load:
AC ~ 5 (0.2)
1)
A
DC = max. 20 W
1)
= inductive load at cos = 0.6
Setting range: 50 100 % relative humidity
Weight: approx. 100 g
Dimensions: 71 x 71 x 33.5 mm
Switching difference: approx. 4%
Flexible mounting on a vertical or horizontal
35 mm support rail to EN 50 022, and snap
fastening in the TS/SE enclosure section or on
the mounting plate using the supplied adaptor.
Accessories:
see page 470.
Rated operating voltage Model No. SK
24 230 V (AC),
24 75 V (DC)
3118.000
Bottom-mounted adaptor
for enclosure internal thermostat SK 3110.000
and hygrostat SK 3118.000
Bottom-mounted adaptor with mounting option for
screwed cable glands, for targeted cable infeed
from appropriate equipment such as SK fan-and-
filter units and enclosure heaters. In conjunction
with screwed cable glands, it is also suitable for
use as strain relief.
1 3110.200
Control unit for
EC fan-and-filter units
Temperature-dependent speed control for EC fan-
and-filter units to reduce noise and save energy.
The function of the fan can also be monitored.
Activation and monitoring of up to 4 EC fan-
and-filter units (caution: EC fan-and-filter units
cannot be controlled with speed control
3120.200!)
Top-hat rail assembly
Temperature setting range:
+5C to +55C/41F to 131F
External temperature sensor to record the
ACTUAL temperature
Status LED to display the operating status
Alarm relay for reporting overtemperature, fan
defect, cable interruption and sensor failure
Supply includes:
NTC sensor, length 1.80 m.
For fan-and-filter units Model No. SK
SK 3245.XXX 3235.440
Control/regulation
Speed control
Temperature-dependent speed control for
TopTherm fan-and-filter units and air/air heat
exchangers for noise reduction and to save
energy in part-load operation.
For mounting on a 35 mm support rail
DIN EN 50 022
Dimensions (W x H x D):
105 x 90.5 x 60.2 mm
Rated operating voltage: 100 230 V (AC)
Phase cross-over with microcontroller
Maximum fan output 300 W or 2 A
Supply includes:
Speed control
NTC sensor, length 1.80 m.
Note:
Only suitable for use with 1-phase AC motors and
equipment.
Accessories:
see page 470.
1 3120.200
Interface board
for equipment with e-Comfort controller
The interface board is an extension for equipment
with e-Comfort controller. In this way it is possi-
ble, e.g. to monitor a master/slave combination of
up to 10 cooling units in conjunction with a Rittal
CMC III. Control is achieved via standardised
interfaces: RS232 (DB9) or RS485, one PLC inter-
face (DB9). RS422 (RJ 45 jack) is the connection
to the Rittal CMC III. In this way, remote monitor-
ing via TCP-IP, graphical interfaces for operation,
evaluation and control, documentation, and con-
nection to additional sensors for access control
are possible. The extension board is built into a
1 U plastic housing.
A voltage supply of 24 V (DC) is required.
This may be supplied from the CMC III via a
wide-range power pack DK 7320.425 (100 to
240 V (AC), 50/60 Hz) or externally via a Kycon
connector.
Supply includes:
Interface board integrated into a plastic box
W x H x D (mm): 136 x 44 (1 U) x 129
Serial SUB-D cable, 1.5 m.
Note:
Networking and monitoring plan may be found
on the relevant product page on the Internet,
under Download.
1 3124.200
35C
30C
25C
20C
20C
40C
35C
SK BUS system
The SK bus system facilitates communications
between several enclosure cooling units and air/
water heat exchangers .500/.510/.540/.600/.610/
.640. via a master/slave construction such as that
required e.g. in complex bayed enclosure sys-
tems for optimum operating conditions.
The master/slave construction facilitates common
activation and deactivation via door limit switches,
parallel activation and deactivation via a tempera-
ture setpoint, and common collective fault signals
and temperature logging, thereby eliminating the
need for intricate wiring.
Supply includes:
3 m shielded interface cable
Operating instructions on programming the
cooling units
Note:
nB = nK 1
nB: Number of order units (SK bus system)
nK: Number of cooling units to be linked
Networking and monitoring plan may be found
on the relevant product page on the Internet,
under Download.
1 3124.100
Master/slave adaptor
for Thermoelectric Cooler
Parallel operation of up to 5 thermoelectric cool-
ers to increase cooling output or for redundant
use.
Also required:
Per slave 1 x RJ 45 network cable DK 7320.470
or DK 7320.472, see page 596.
For units Model No. SK
SK 3201.200, SK 3201.300 3201.070
1
3
T
1
B
1
T
2
T
3
B
2
=
=
Roof plates TS
For mounting:
Roof-mounted units
Roof-mounted fan
Vent attachment TS
The cut-outs in the roof plate are arranged in such
a way that the roof-mounted cooling units are
positioned centrally on the enclosure.
Material:
Sheet steel
Colour:
RAL 7035
Supply includes:
Assembly parts.
For enclosures
W (B) x D (T) mm
For mounting
B1
mm
B2
mm
T1
mm
T2
mm
T3
mm
Model No. TS
800 x 600
SK 3382. . . ./SK 3359. . . ./
SK 3149.4 . ./SK 3149.8. .
767.5 475 567.5 260 129.3 8801.320
600 x 600 SK 3209. . . ./SK 3383. . . ./
SK 3210. . . ./SK 3384. . . ./
SK 3273. . . ./SK 3385. . . ./
TS 8801.380
567.5 490 567.5 390 61.3 8801.310
1)

800 x 600 767.5 490 567.5 390 61.3 8801.330
1200 x 600 1167.5 490 567.5 390 61.3 8801.350
800 x 600 SK 3386. . . ./SK 3387. . . . 767.5 692 567.5 392 57.8 8801.340
2)

1)
When mounting the cooling units, there may be a collision with the eyebolts of the enclosure; for this reason,
roof fastening screws are supplied loose with the roof plates.
2)
Attachment is from the inside using metal brackets and retaining clamps.
3
7
.
5
4
6
4
5
6
4
Vent attachment TS
For passive ventilation with labyrinthine air flow
routing, to match the roofs for roof-mounted
cooling units.
Colour:
RAL 7035
IP 43
Supply includes:
Assembly parts.
For roof plates
with cut-out
Model No. TS
490 x 390 mm 8801.380
Vent cover
The ideal addition for incorporating sealed racks
into an existing central climate control system.
The stepped connection is suitable for standard
pipe diameters 150 mm and 200 mm, thereby
ensuring effective cooling thanks to targeted air
exchange inside the rack.
Design:
Diameter of hose connection:
150 mm/200 mm
Maximum cut-out on roof plate:
380 mm x 230 mm
Material:
PET-G, transparent
Supply includes:
Assembly parts.
Rittal service:
Mounting on the enclosure on request.
Width
mm
Height
mm
Depth
mm
Packs
of
Model No. DK
450 144 300 1 7826.750
Trim frame
for slimline cooling units
Slimline cooling units can be internally or exter-
nally mounted on an enclosure door or wall. The
trim frame presents a closed front for the cooling
unit.
Material:
Sheet steel
Colour:
RAL 7035
For cooling unit Model No. SK
SK 3366. . . . 3377.000
1
4
0
Quick-change frame
The quick-change frame is more than just an alter-
nate frame. Together with the seal, the lower part
of the frame is screw-fastened to the enclosure.
In this way, it is possible to install and remove the
connector-ready cooling unit with the upper part
of the quick-change frame previously mounted
on the cooling unit with quick-release fasteners.
During servicing work, this means shorter assem-
bly times and hence minimised downtime. What
is more, the quick-change frame offers effective
protection against the ingress of oil into the enclo-
sure in oily atmospheres, thanks to its integral
drainage trough.
Material:
Sheet steel
Colour:
RAL 7035
Supply includes:
Quick-change frame
Seal
Quick-release fasteners
For roof-mounted cooling units Model No. SK
SK 3359. . . ./SK 3382. . . . 3286.700
SK 3209. . . ./SK 3210. . . ./
SK 3383. . . ./SK 3384. . . ./
SK 3385. . . .
3286.800
SK 3301.800/SK 3386. . . . /
SK 3387. . . .
3286.900
Adjustable frame
for air/air heat exchangers,
railway-compatible version
The adjustable frame allows variable partial instal-
lation of air/air heat exchangers on enclosures, to
facilitate optimum space utilisation.
Material:
Sheet steel
Colour:
RAL 7035
For heat exchangers Model No. SK
SK 3126.4. . 3286.260
SK 3128.4. ./SK 3129.4. . 3286.270
SK 3130.4. . 3286.280
Adaptor frame
for wall-mounted cooling units
To compensate for the rear tilt of the TP consoles.
Material:
Sheet steel
Surface finish:
Powder-coated
Textured paint
Colour:
RAL 7035
Supply includes:
Assembly parts.
For cooling units 300 W Packs of Model No. TP
SK 3302.300/.310 1 6730.600
245
167
481
77.5 200 200 77.5
2
0
3
2
9
8
4
8
4
2
0
1
2
7
7
7
Mounting cut-out
1
Top edge of console
Adaptor frame
Cooling units SK 3302.3X0
1
2
3
2
3
B
H
T
Integrated louvres
For ventilation by convection; easily retro-fitted
using 4 screws.
Material:
Sheet steel
Colour:
RAL 7035
Detailed drawing:
W (B) x H x D (T) mm Packs of Model No. SK
160 x 110 x 8 4 2541.235
210 x 100 x 8 4 2542.235
330 x 110 x 8 4 2543.235
Filter technology
Filter mats
for tangential fans
Made of chopped-fibre mat with a progressive
structure. Temperature-resistant to 100C,
self-extinguishing category F1 to DIN 53 438.
Dust-laden air side: Open structure.
Clean air side: Closed structure.
Reliable filtering of virtually all types of dust from
a particle size of 10 m.
Material:
Chemical fibre
For tangential fans/front outlet grilles 2 U W x H x D mm Packs of Model No. SK
SK 3144.000/SK 3145.000/SK 3176.000 425 x 85 x 8 5 3177.000
Filter mats
For
Cooling units
Rittal cooling units are low-maintenance and are
supplied without filter mats. Filter mats may be
used for extreme conditions.
Material:
Open-celled polyurethane foamed plastic
Outstanding physical and mechanical proper-
ties
Temperature-resistant from 40C to +80C
Thickness: 10 mm
For cooling units W x H x D mm Packs of Model No. SK
SK 3302.300/SK 3302.310 190 x 95 x 10 3 3286.110
SK 3302. . . ./SK 3303. . . ./SK 3361. . . . 265 x 200 x 10 3 3286.300
SK 3304. . . ./SK 3305. . . ./SK 3328. . . ./SK 3329. . . ./
SK 3332. . . ./SK 3366. . . .
344 x 268 x 10 3 3286.400
SK 3273. . . ./SK 3382. . . ./SK 3383. . . ./SK 3384. . . ./
SK 3385. . . ./SK 3359. . . .
530 x 255 x 10 3 3286.500
SK 3386. . . ./SK 3387. . . . 720 x 300 x 10 3 3286.600
SK 3377. . . . 205 x 210 x 10 3 3253.010
For discontinued cooling units W x H x D mm Packs of Model No. SK
SK 3296. . . ./SK 3272.100/SK 3290. . . ./SK 3280.100/
SK 3299. . . ./SK 3261. . . .
539 x 332 x 10 3 3286.100
SK 3265.100/SK 3266.100 270 x 332 x 10 3 3267.100
SK 3256. . . . 395 x 300 x 10 3 3254.000
SK 3293. . . ./SK 3281.100/SK 3298. . . ./SK 3279.100/
SK 3260. . . ./SK 3269. . . ./SK 3262.100/SK 3393. . . ./
SK 3381.100/SK 3391. . . .
334 x 313 x 10 3 3294.100
SK 3255. . . ./SK 3395. . . . 350 x 245 x 10 3 3253.000
SK 3394. . . . 315 x 200 x 10 3 3285.000
SK 3292.134/SK 3278.134 325 x 250 x 10 3 3286.000
For air/air heat exchangers W x H x D mm Packs of Model No. SK
SK 3126.100/SK 3126.115 265 x 200 x 10 3 3286.300
SK 3127.100/SK 3127.115/SK 3128.100/SK 3128.115/
SK 3129.100/SK 3129.115/SK 3130.100/SK 3130.115
344 x 268 x 10 3 3286.400
Filter technology
Metal filters
Particularly when cooling units are used in dusty
and damp environments, it is advisable to use
washable metal filters.
If air or steam condenses on the metal surfaces,
any particles that may be present will adhere to
the metal and are easily washed out with water
or grease-dissolving detergents.
Material:
Aluminium
Thickness: 10 mm
For cooling units W x H x D mm Packs of Model No. SK
SK 3302.300/SK 3302.310 190 x 95 x 10 1 3286.120
SK 3302.100/SK 3302.110/SK 3303. . . ./SK 3361. . . . 265 x 200 x 10 1 3286.310
SK 3304. . . ./SK 3305. . . ./SK 3328. . . ./SK 3329. . . ./
SK 3332. . . ./SK 3366. . . .
344 x 268 x 10 1 3286.410
SK 3273. . . ./SK 3382. . . ./SK 3383. . . ./SK 3384. . . ./
SK 3385. . . ./SK 3359. . . .
530 x 255 x 10 1 3286.510
SK 3386. . . ./SK 3387. . . . 720 x 300 x 10 1 3286.610
SK 3377. . . . 225 x 200 x 10 1 3253.220
For discontinued cooling units W x H x D mm Packs of Model No. SK
SK 3296. . . ./SK 3272.100/SK 3290. . . ./SK 3280.100 520 x 290 x 10 1 3286.210
SK 3299. . . ./SK 3261. . . . 520 x 315 x 10 1 3286.200
SK 3265.100/SK 3266.100 265 x 320 x 10 1 3267.200
SK 3256. . . . 315 x 365 x 10 1 3254.200
SK 3293. . . ./SK 3281.100/SK 3298. . . ./SK 3279.100/
SK 3260. . . ./SK 3269. . . ./SK 3262.100/SK 3393. . . ./
SK 3381.100/SK 3391. . . .
300 x 328 x 10 1 3294.200
SK 3255. . . ./SK 3395. . . . 348 x 210 x 10 1 3253.200
SK 3394. . . . 375 x 415 x 10 1 3285.200
For climate control door/section door W x H x D mm Packs of Model No. SK
SK 3300.040/SK 3300.050/SK 3300.060/SK 3300.070/
SK 3300.080/SK 3300.090/SK 3300.110/SK 3300.120
425 x 78 x 10 1 3284.210
For discontinued climate control doors W x H x D mm Packs of Model No. SK
SK 3306. . . ./SK 3307. . . ./SK 3309. . . ./SK 3310. . . . 424 x 100 x 10 1 3284.200
SK 3308. . . . 624 x 100 x 10 1 3288.200
For discontinued climate control side panel W x H x D mm Packs of Model No. SK
SK 3331. . . . 380 x 150 x 10 1 3289.200
For air/air heat exchangers W x H x D mm Packs of Model No. SK
SK 3126.100/SK 3126.115 265 x 200 x 10 1 3286.310
SK 3127.100/SK 3127.115/SK 3128.100/SK 3128.115/
SK 3129.100/SK 3129.115/SK 3130.100/SK 3130.115
344 x 268 x 10 1 3286.410
For air/air heat exchangers,
wall-mounted, railway-compatible version
W x H x D mm Packs of Model No. SK
SK 3126.4XX 130 x 130 x 10 1 3286.230
SK 3128.4XX/SK 3129.4XX 208 x 208 x 10 1 3286.240
SK 3130.4XX 225 x 225 x 10 1 3286.250
For recooling systems W x H x D mm Packs of Model No. SK
SK 3318.600/SK 3318.610/SK 3319.600/SK 3319.610 530 x 255 x 10 1 3286.510
SK 3320.600/SK 3334.600 500 x 558 x 8 1 3286.520
SK 3360. . . . 344 x 268 x 10 1 3286.410
For chillers W x H x D mm Packs of Model No. SK
SK 3335.590/SK 3335.600 600 x 800 x 20 1 3286.550
SK 3335.610/SK 3335.620/SK 3335.650 600 x 1050 x 20 1 3286.530
SK 3335.630/SK 3335.640/SK 3335.660 1000 x 1035 x 20 1 3286.540
Filter technology
Lint screen
Especially for the use of cooling units and air/air
heat exchangers where there is a high proportion
of lint in the ambient air.
Material:
Stainless steel mesh
Also required:
Louvred grille for lint screen.
For units
Packs
of
Model No. SK
SK 3304. . . ./SK 3305. . . ./
SK 3328. . . ./SK 3329. . . ./
SK 3332. . . ./SK 3360. . . ./
SK 3126. . . ./SK 3127. . . ./
SK 3128. . . ./SK 3129. . . ./
SK 3130. . . .
1 3329.904
Louvred grille for lint screen
Material:
ABS
For lint screen
Packs
of
Model No. SK
SK 3329.904 1 3329.903
Spare filter mats
structure. Temperature-resistant to +100C,
For thermoelectric cooler Material
Filter class
to DIN EN 779
SK 3201.200/SK 3201.300 Chemical fibres G2 5 3201.050
For fan-and-filter units Material
Filter class
to DIN EN 779
SK 3237. . . .
Chemical fibres
G2 5 3321.700
SK 3238. . . . G2 5 3322.700
SK 3239. . . . G3 5 3171.100
SK 3240. . . ./SK 3241. . . . G3 5 3172.100
SK 3243. . . ./SK 3244. . . . G3 5 3173.100
For discontinued fan-and-filter units/
outlet filters
Material
Filter class
to DIN EN 779
SK 3321. . . .
Chemical fibres
G2 5 3321.700
SK 3322. . . . G2 5 3322.700
SK 3323. . . . G3 5 3171.100
SK 3324. . . ./SK 3325. . . . G3 5 3172.100
SK 3326. . . . G3 5 3173.100
SK 3327. . . . G3 5 3327.700
For filter holders Material
Filter class
to DIN EN 779
SK 3175.000 Chemical fibres G2 3 3174.000
For EMC fan-and-filter units Material
Filter class
to DIN EN 779
SK 3237. . . .
Copper-nickel
coated
chemical fibres
G2 5 3237.066
1)
SK 3238. . . . G2 5 3238.066
1)
SK 3239. . . . G3 5 3239.066
1)
SK 3240. . . ./SK 3241. . . . G3 5 3240.066
1)
SK 3243. . . ./SK 3244. . . ./SK 3245. . . . G3 5 3243.066
1)
1)
To achieve the shielding/dampening properties of EMC fan-and-filter units.
Filter technology/general
Fine filter mats
for fan-and-filter units
structure. Temperature-resistant to +100C,
Material:
Chemical fibre
For fan-and-filter units
Filter class to
DIN EN 779
SK 3238. . . . F5 5 3238.055
SK 3239. . . . F5 5 3181.100
SK 3240. . . ./SK 3241. . . . F5 5 3182.100
SK 3243. . . ./SK 3244. . . ./SK 3245. . . . F5 5 3183.100
For discontinued fan-and-filter units/outlet filters
Filter class to
DIN EN 779
SK 3323. . . . F5 5 3181.100
SK 3324. . . ./SK 3325. . . . F5 5 3182.100
SK 3326. . . ./SK 3327. . . . F5 5 3183.100
Auto Range power pack 240 W
for 24 V (DC) components
For power supply e.g. to DC fan-and-filter units
or the Thermoelectric Cooler SK 3201.300 with
primary 115/230 V (AC) voltage supply input.
Approvals: CE, UL-listed
Dimensions W x H x D: 83 x 125 x 116 mm
Snaps onto a 35 mm top-hat rail
1 3201.040
Electric condensate evaporator
For external mounting on enclosures.
For use with all enclosure cooling units and
air/water heat exchangers.
Evaporation performance:
1)
2.4 l/d
2)
4.2 l/d
Colour:
RAL 7035
Supply includes:
Electric condensate evaporator, ready to connect.
Detailed drawings:
For cooling units
Rated
operating voltage
Model No.
SK
SK 3302. . . ./
SK 3303. . . .
230 V, 50/60 Hz 3301.560
1)
115 V, 50/60 Hz 3301.580
1)
400 mm wide
230 V, 50/60 Hz 3301.570
2)
115 V, 50/60 Hz 3301.590
2)
1
2
3
73
2
3
9
6
6
Condensate collecting bottle
For mounting on the enclosure.
For use with all enclosure cooling units and
air/water heat exchangers.
Safety overflow at the side.
Capacity approximately 0.75 l.
Condensate discharge tube
Membrane grommet
Max. 70 mm
Supply includes:
Condensate collecting bottle
Bottle holder
Assembly parts
1
2
3
1 3301.600
General
Condensate hose
For removing and directing condensate.
For connecting to enclosure cooling units.
Material:
PVC, transparent
For units Hose length
Material thickness

Model No. SK
SK 3201. . . . 5 m 6 x 1 mm 3301.606
SK 3302. . . ./SK 320. . . . . 10 m 8 x 1.5 mm 3301.608
SK 3303. . . ./SK 3361. . . . 10 m 10 x 1.5 mm 3301.610
SK 3273. . . ./SK 3304. . . ./SK 3305. . . ./SK 3328. . . ./
SK 3329. . . ./SK 3332. . . ./SK 3359. . . ./SK 3366. . . ./
SK 3377. . . ./SK 3382. . . ./SK 3383. . . ./SK 3384. . . ./
SK 3385. . . ./SK 3386. . . ./SK 3387. . . .
10 m 12 x 2 mm 3301.612
Outlet filters
For ventilation by convection, an outlet filter can
be installed in the upper and lower sections of the
enclosure.
Material:
ABS,
material resistance to UL 94-5VA.
Colour:
RAL 7035
Supply includes:
Outlet filter
Filter mat
Accessories:
Spare filter mats, see page 301.
Fine filter mats, see page 302.
Dimensions
W x H x D in mm
Model No. SK
Standard EMC
116.5 x 116.5 x 16 3237.200 3237.060
148.5 x 148.5 x 24 3238.200 3238.060
204 x 204 x 24 3239.200 3239.060
255 x 255 x 25 3240.200 3240.060
323 x 323 x 25 3243.200 3243.060
Hose-proof hood
For fan-and-filter units/outlet filters. Easy cleaning
thanks to exterior silicon coating approved for use
with foodstuffs. When mounted over the fan-and-
filter unit and outlet filter, a protection category of
IP 56 to IEC 60 529 is achieved.
Material:
Stainless steel
Silicone
In conjunction with the fan-and-filter units/
outlet filters, NEMA 3R + 12 is met.
Protection category is met by type 1, 12, 3, 3R,
4, 4X.
With SK 3237.080 and SK 3245.080, the protec-
tion category is only met by type 1, 12, 3R.
For fan-and-filter units
Dimensions
mm
Model No.
SK
SK 3237. . . . 150 x 230 x 40 3237.080
SK 3238. . . . 176 x 245 x 55 3238.080
SK 3239. . . . 233 x 330 x 55 3239.080
SK 3240. . . ./SK 3241. . . . 282 x 390 x 85 3240.080
SK 3243. . . ./SK 3244. . . . 350 x 480 x 110 3243.080
SK 3245. . . . 350 x 480 x 160 3245.080
Blanking cover
If existing mounting cut-outs for fan-and-filter
units/outlet filters need to be closed to achieve
a higher protection category, the filter mat of the
fan-and-filter unit/outlet filter can simply be
replaced with a blanking cover; welding or other
mechanical modification of the enclosure is not
necessary.
Material:
Plastic
IP 54
For fan-and-filter units/
outlet filters
Packs of
Model No.
SK
SK 3237. . . . 2 3237.020
SK 3238. . . . 2 3238.020
SK 3239. . . . 2 3239.020
SK 3240. . . ./SK 3241. . . . 2 3240.020
SK 3243. . . ./SK 3244. . . . 2 3243.020
General
Front outlet grille 2 U
for tangential fans
This front outlet grille is required if a 482.6 mm (19)
cross-flow blower (SK 3144.000/SK 3145.000) is
used in the lower section of the electronic enclo-
sure and the hot air is to be expelled to the out-
side from the upper section of the enclosure.
The design of the grille matches that of the intake
grille in the cross-flow blower.
These grilles can also be used as simple inflow
and outflow grilles with natural convection.
Accessories:
Filter mat, see page 299.
1 3176.000
Filter holder
for roof ventilation
The use of a filter mat is required in order to
increase the protection category of the roof vent
(SK 3148.007).
Protection category IP 44 to IEC 60 529 is
achieved.
Material:
Sheet steel
Supply includes:
Filter holder including filter mat.
Accessories:
Spare filter mat, see page 301.
W x H x D mm Model No. SK
340 x 244 x 15 3175.000
Overflow valve
Pressostat for use in the water cycle between
the recooling system and the air/water heat
exchanger. It prevents an increase in pump pres-
sure in the recooling system against the closed
magnetic valve of the air/water heat exchanger
outside of the cooling cycle.
Setting range:
2 12 bar
Presetting:
3 bar
Material:
Brass
Design Packs of Model No. SK
1
/2 bypass valve 1 3301.900
3
/4 bypass valve 1 3301.910
1 bypass valve 1 3301.920
Flow regulator valve
For use with air/water heat exchangers, espe-
cially if more than one heat exchanger (n > 1) is
used in the water cooling circuit. The correctly set
valve then ensures the same quantity of cooling
medium for all equipment. The valve is used for
hydraulic balancing.
Setting range:
3 12 l/min
Material:
Brass
Design Packs of Model No. SK
3
/4 x
1
/2
for volumetric flow control
1 3301.930
3
/4 x
3
/4
for volumetric flow control
1 3301.940
Threaded adaptor for
quick-release fastener
For use with air/water heat exchangers with quick-
release fastener. This threaded adaptor enables
simple adaptation to fixed and flexible pipework.
Material:
Brass
For
units
Design
Packs
of
Model No.
SK
SK 3363..../
SK 3364..../
SK 3373..../
SK 3374..../
SK 3375....
G3/8 internal thread 2 3201.900
G3/8 external thread 2 3201.910
Stainless steel V4A version available on request.
General
Cooling medium
for recooling systems
Ready mix
Apart from the recooling systems for oil and emul-
sion, all other recooling systems are only suitable
for the cooling of water or a water/glycol mixture.
As well as protecting against frost, this cooling
medium also serves to inhibit bacterial growth and
provide optimum corrosion protection.
Supply includes:
10 l canister
25 l canister
200 l barrel
Cooling
medium
Antifreeze/
water mixture
Container Model No. SK
Outdoor 1 : 2
10 l 3301.950
25 l 3301.955
200 l 3301.957
1)

Standard 1 : 4
10 l 3301.960
25 l 3301.965
200 l 3301.967
1)

1)
Connection kit
for connecting the CRAC system CW to the cus-
tomers pipework when using water as a cooling
medium.
The connection kit is preassembled and is con-
nected to an outgoing pipe with stop valve (to be
provided by the customer) in both the inlet and
outlet.
Supply includes:
Inlet side in direction of flow
High-pressure hose for flexible connection to the
CRAC system CW.
Return side in direction of flow
High-pressure hose for flexible connection to the
CRAC system CW.
For CRAC system CW
Nominal
width
Model No. SK
SK 3301.620 to 3301.650 1 3300.260
SK 3301.660 to 3301.690 1
1
/4 3300.261
SK 3301.830 to 3301.860 1
1
/2 3300.262
SK 3301.870 to 3301.990 2 3300.263
Energy-saving extractor
plenum
for top-mounting on CRAC systems CW/DX.
The extractor plenum is used to raise the extrac-
tion height of the return air and return it to the
CRAC system CW/DX at the highest possible
temperature level. In this way, the energy effi-
ciency of the unit can be increased significantly.
The extractor plenum is comprised of an empty
enclosure tailored to the width and depth of the
CRAC system CW/DX. The equipment enclosure
and extractor plenum are screw-fastened together
using the assembly kit supplied loose.
Supply includes:
Empty enclosure including assembly kit.
Note:
Special heights to adapt to the available room
height are available on request.
For
CRAC system CW/DX
Height
mm
Model No. SK
SK 3301.620 to 3301.650 550 3300.290
SK 3301.660 to 3301.690 550 3300.291
SK 3301.830 to 3301.860 550 3300.292
SK 3301.870 to 3301.990 550 3300.293
SK 3300.510 to 3300.540 550 3300.294
SK 3300.560 to 3300.590 550 3300.295
SK 3300.710 to 3300.740 550 3300.296
SK 3300.760 to 3300.790 550 3300.297
306
307
IT infrastructure
IT competence
System overview Wall-mounted/floor-standing network enclosures ......311
System overview Server enclosures.......................................................313
System overview Power ..........................................................................315
System overview Cooling .......................................................................317
System overview Monitoring...................................................................319
System overview Security solutions........................................................321
308
1
9
7
3
2
10
8
309
IT competence
Wall-mounted/floor-standing network enclosures
Wall-mounted enclosures............................................................................53
Network enclosures.....................................................................................79
Server enclosures
Server enclosures........................................................................................91
Power
UPS systems .............................................................................................189
Power Distribution Rack ............................................................................200
Power System Module Plus .......................................................................201
Power System Module...............................................................................202
RiCell Flex fuel cell system........................................................................205
Cooling
Chillers for IT cooling.................................................................................272
CRAC system............................................................................................274
Liquid Cooling Package............................................................................279
Monitoring
Monitoring system CMC III ........................................................................578
Door control system ..................................................................................589
Monitor/keyboard unit................................................................................590
KVM switches ............................................................................................591
Dynamic Rack Control...............................................................................597
Security solutions
Compact data centre ................................................................................321
Data Centre Container...............................................................................327
Fire alarm and extinguisher system ..........................................................328
Security rooms...........................................................................................331
Software
RiZone .......................................................................................................345
Your benefits
Standardised server racks and network enclosures
Modular power distribution and back-up
Scalable IT cooling concepts
High-MTBF IT security rooms, including certificates
Complete system accessories for IT environments and data centres
Software-based IT and infrastructure management system
6
5
4
Sample applications
Wall-mounted enclosures, see page 53
Network enclosures, see page 79
Server enclosures, bayed in combination with LCP, see page 94/279
Power distribution
UPS systems, see page 189
Power Distribution Rack, see page 200
Chillers for IT cooling, see page 272
Monitoring system CMC III, see page 578
Compact data centre, see page 321
Data Center Container, see page 327
1
2
3
4
5
6
7
8
9
10
310
4
3
1
5
5
6
2
311
VerticalBox ..................................................................................................54
FlatBox with 482.6 mm (19) mounting angles............................................55
FlatBox with 482.6 mm (19) mounting frame .............................................56
QuickBox with glazed door .........................................................................57
QuickBox with sheet steel door...................................................................58
QuickBox with vertical 482.6 mm (19) level ...............................................59
Wall-mounted enclosures EL, 3-part, depth 573/673 mm, pre-configured ....60
Wall-mounted enclosures EL, 3-part, depth 473 mm, with punched rails......61
Wall-mounted enclosures EL, 3-part, depth 373 mm, with mounting plate....62
Wall-mounted enclosures EL, 3-part, depth 473 mm, with mounting plate....63
Wall-mounted enclosures EL, 2-part, depth 369 mm, with swing frame ........64
Wall-mounted enclosures AE with 482.6 mm (19) mounting angles.............65
Wall-mounted enclosures AE with 482.6 mm (19) pull-out frame .................66
Small fibre-optic distributors.........................................................................67
Floor-standing network enclosures
Pre-configured, doors unvented .................................................................80
Pre-configured, doors vented .....................................................................81
Pre-configured, doors/rear wall unvented...................................................82
Pre-configured, doors unvented, divided ...................................................82
Pre-configured.............................................................................................85
600 mm width..............................................................................................86
800 mm width..............................................................................................87
Distributor racks
TE 7000 open ..............................................................................................88
Data Rack....................................................................................................89
Your benefits
Network enclosures
Network enclosures for stand-alone installation and data centres
Complete system solutions for small to large networks
Maximum configuration diversity and protection for installed equipment
Investment protection and flexibility thanks to simple conversions and
use of the comprehensive modular system
The right enclosure to suit all applications up to protection category
IP 55
Sizes available from 3 U to 21 U
Wide choice of accessories with Rittal The System.
Fast assembly, conversion and simple installation based on the modular
principle
Wall-mounted/floor-standing
network enclosures
Sample applications
Wall-mounted enclosures EL, see page 60
FlatBox, see page 55
QuickBox wall-mounted enclosure with vertical 482.6 mm (19) level,
see page 59
QuickBox wall-mounted enclosure with glazed door, see page 57
TE 7000 network enclosure with base/plinth and installation accessories,
see page 85
TS 8 network enclosures, bayed with base/plinth, roof-mounted fan
and installation accessories, see page 80
1
2
3
4
5
6
6
6
312
1
2
2
1
313
Server enclosures
Server enclosures
TS 8 server enclosures, colocation .............................................................93
TS 8 server enclosures for High Performance Cooling systems HPC ........94
Your benefits
Broad spectrum of sizes
Integrated system, from small server racks to bayed rack suites
in the data centre
First-class finish for maximum protection
High-quality lock systems for optimum access protection
Comprehensive, system-compatible complete range for cooling,
power distribution/power backup and monitoring
Sample applications
TS 8 server enclosures in combination with aisle containment and LCP,
see page 278
TS 8 server enclosures, colocation, see page 93
TS 8 server enclosures in combination with LCP, see page 94
1
2
3
3
314
1
3
2
4
315
Power
UPS systems
UPS PMC 12..............................................................................................190
UPS PMC 40 (type 1-4) .............................................................................191
UPS PMC 40 (type 5) ................................................................................192
UPS PMC 120............................................................................................193
UPS PMC 200............................................................................................194
UPS PMC 800............................................................................................195
UPS PMC accessories ..............................................................................196
Power Distribution Rack ............................................................................200
Power Distribution Module ........................................................................200
Power System Module
PSM Plus busbar .......................................................................................201
PSM Plus plug-in modules ........................................................................201
PSM busbars .............................................................................................202
PSM socket modules.................................................................................203
PSM accessories.......................................................................................204
Fuel cell system
RiCell Flex fuel cell system........................................................................205
Your benefits
Holistic, systematic energy management concepts
Comprehensive, complete solutions for power distribution and back-up,
consistently modular, and flexibly extendible at any time
Optimum energy and cost efficiency with maximum availability of the
entire system
Reduced costs for installation, administration and manpower
High level of investment certainty
All from a single source!
Sample applications
Power Modular Concept PMC 200, see page 194
Power Distribution Rack PDR, see page 200
Power Distribution Module PDM, see page 200
Power System Module PSM, see page 201
1
2
3
4
316
2
2
3
3
5
3
3
4
4
6
317
Cooling
Chillers for IT cooling.............................................. 15 123 kW..............272
Chillers for IT cooling............................................ 155 481 kW..............273
CRAC system
CRAC system CW ............................................ 27.8 137.4 kW..............274
CRAC system DX ............................................... 19.2 56.2 kW..............276
Aisle containment
TopTherm LCP Rack CW and DX ........................... up to 60 kW..............279
TopTherm LCP Inline CW and DX........................... up to 60 kW..............280
TopTherm LCP T3+ CW.......................................... up to 25 kW..............281
TopTherm LCP Passive CW............................................. 20 kW..............282
Accessories...............................................................................................283
Your benefits
State-of-the-art climate control technology, from cooling a single rack
through to entire data centres
Individual climate control concepts for rack, suite and room cooling
Enhanced security plus superior energy and cost efficiency
Optimisation with aisle containment and cross-system control concepts
Energy-efficient cooling with IT chillers
Minimises operating costs with free cooling
Environmentally friendly thanks to resource and CO2 savings
Planning, assembly, commissioning and servicing
all from a single supplier!
1
7
Sample applications
Rittal aisle containment, see page 278
CRAC systems, see page 274
Liquid Cooling Package LCP, see page 279
IT chiller, see page 272
Free cooling
Pipework
Raised floor for cold air supply
1
2
3
4
5
6
7
318
4
2
5
1
6
3
1
8
7
319
Monitoring
Monitoring system CMC III
CMC III system representation..................................................................578
CMC III system overview...........................................................................580
CMC III Processing Unit/Compact ............................................................582
CMC III sensors.........................................................................................583
CMC III accessories ..................................................................................584
Door Control System
Door Control System .................................................................................588
Monitor/keyboard unit
KVM switches
SSC view 8 USB, SSC view 32 Cat, SSC compact 32 Cat........................591
SSC premium 2/16, 4/32, 8/32 ..................................................................592
SSC Duo 16...............................................................................................593
Dynamic Rack Control
RFID mounting frame, tags, controller ......................................................597
Software
RiZone .......................................................................................................345
Your benefits
Overview of your IT infrastructure
Enhanced security
Automated processes
High cost efficiency
Enormous energy savings
Simple project management
Fast installation
Flexible, individual solutions with standard products from Rittal
High standard of quality with coordinated standard products
1
1
2
3
Sample applications:
CMC III, see page 581
Power System Module PSM, Power Control Unit PCU
incl. current measurement see page 201
Liquid Cooling Package LCP, see page 279
Connection of up to 10 cooling units with Comfort control via one unit
Sensors/actuators, see page 583
Temperature sensor
Humidity sensor
Access and vandalism sensors
Motion detectors
Airflow monitors
Smoke detectors
Voltage monitor
Power supply
Leaks
Monitor/keyboard unit, see page 590
Electric comfort handle TS 8, see page 415
Fire alarm and extinguisher system DET-AC XL, see page 329
1
2
3
4
5
6
7
8
7
320
1
2
321
Security solutions
Compact data centre
Basic Safe .................................................................................................322
Modular Safe .............................................................................................323
Modular Safe Extend.................................................................................324
Climate control for Modular Safe/Modular Safe Extend ............................325
Data Centre Container DCC
Data Centre Container DCC......................................................................327
Fire alarm and extinguisher system
DET-AC Plus..............................................................................................328
DET-AC XL ................................................................................................329
Security rooms
Data centres ..............................................................................................331
3
Sample applications
Modular Safe with climate control, see page 323, 325
Basic Safe with CMC and extinguisher system, see page 322
Modular Safe Extend as compact data centre, see page 324
1
2
3
Basic Safe
322 Rittal Catalogue 33/IT infrastructure
Applications:
Micro data centre for small
businesses
Protection for servers and
storage applications
Protection for business-critical
data
Storage of personal data,
e.g. doctors surgeries or tax
advisors
Benefits:
Complete system with built-in
climate control
High level of operational and
service-friendliness thanks to
the two-door system
Compatibility with other infra-
structure elements
Protection standards:
Fire protection F90 based on
DIN 4102
Compliance with limit values
T < 50 K, relative humidity
< 85% for 10 minutes
Tested burglary protection
WK 2 EN 1627
Protection against dust and
water jets IP 55 to IEC 60 529
The tests were performed as
system tests and confirmed by
way of test reports.
Material:
Pladur plate
Colour:
Enclosure: RAL 7035
Supply includes:
Security enclosure with
operating and service doors
(three-point locking)
Cable entry in both side
elements
Climate control 2.4 kW
Detailed drawings:
T
1
H
1
T
2
B
2
H
2
B
1
Fire Extinguishing
water
Vandalism Unauthorised
access
Dust Theft/
burglary
Standard protection from:
U 15
Cooling capacity kW 2.4
Width (B1) mm 806
Height (H1) mm 1699
Depth (T1) mm 1270
Clearance width (B2) mm 620
Clearance height (H2) mm 827
Clearance depth (T2) mm 1024
Weight excluding internal installation approx. kg 360
Model No. LS Basic Safe with built-in 482.6 mm (19) rack 7999.999
Model No. LS Basic Safe without built-in 482.6 mm (19) rack 7999.898
Accessories
482.6 mm (19) rack, 15 U, depth 1000 mm 7995.992
Early fire detection system EFD Plus see page 328
Fire alarm and extinguisher system DET-AC Plus see page 328
CMC monitoring system see page 577
Modular Safe
Applications:
Solid protection against
potential physical threats for
IT components
Targeted configuration
components transform the
safe into a complete,
compact data centre.
Benefits:
Modular assembly
Prepared for the installation
of various IT climate control
solutions
Low weight
User-friendly, thanks to
operator and service door
DIN 4102
Burglary protection WK 2 to
EN 1627
Protection from acrid gases to
DIN 18 095
Material:
Pladur plate
Colour:
Enclosure: RAL 7035
Supply includes:
Security safe as a two-door
system
Cable duct in both side
elements
Both doors with semi-cylinder
and two locks
Optional cable routing in
the top element, selectable
positioning
Detailed drawings:
B
1
T
2
T
1
H
1
B
2
H
2
Fire Extinguishing
water
access
Dust Theft/
burglary
Two-door-system
U 33 47
External dimensions mm
Width (B1) 1500 1500
Height (H1) 1942 2321
Depth (T1) 1238 1238
Internal dimensions mm
Width (B2) 979
1)
979
1)

Height (H2) 1840 2219
Depth (T2) 1010 1010
Clearance height of door opening mm 1678 2057
Model No. LS 7999.892 7999.893
Accessories
482.6 mm (19) rack, based on TS 8, 482.6 mm (19) level front
and rear, 6 support strips for mounting on the 482.6 mm (19) level,
2 punched sections with mounting flanges
W 800 x H 1600 x D 1000 7831.429
W 800 x H 2000 x D 1000 7995.969
W 800 x H 2200 x D 1000 7999.970
Climate control for Modular Safe see page 325/326
1)
With built-in heat exchanger.
Modular Safe Extend
Applications:
A high level of protection
against potential physical
threats for IT
Targeted configuration com-
ponents transform the safe
into a complete, compact
data centre.
Benefits:
Modular assembly
Expandability for graduated
investment in line with IT
growth
Prepared for the installation
of various IT climate control
solutions
Systems may be dismantled
and reassembled, for maxi-
mum investment security
DIN 4102
Compliance with limit values
T < 50 K, relative humidity
< 85% for 30 minutes
Burglary protection optionally
WK 2, 3 or 4 EN 1627
Protection from acrid gases to
DIN 18 095
The tests were performed as
system tests and confirmed by
way of test reports.
Material:
Pladur plate
Colour:
Enclosure: RAL 7035
Supply includes:
Security safe with operator
door and servicing door
Cable entry in both side
elements
Both doors with key lock
Optional:
Electronic combination lock
Electronic lock pre-equipped
for activation by an external
access control system
Cable entry in the top and
base unit
Twin-walled doors
Choice of door hinges
Detailed drawings:
T
2
T
1
B
1
H
1
B
2
H
2
U 42 47 42 47
External dimensions mm
Width (B1) 1100 1100 1100 1100
Height (H1) 2210 2410 2210 2410
Depth (T1) 1200 1200 1400 1400
Internal dimensions mm
Width (B2) 920 920 920 920
Height (H2) 2030 2230 2030 2230
Depth (T2) 1000 1000 1200 1200
Model No. LS
Individual solution 7999.896 7999.897 7999.983 7999.987
Suite creation
Left 7999.977 7999.980 7999.984 7999.988
Centre 7999.978 7999.981 7999.985 7999.989
Right 7999.979 7999.982 7999.986 7999.990
Accessories
482.6 mm (19) rack, based on TS 8, 482.6 mm (19) level front
and rear, 6 support strips for mounting on the 482.6 mm (19) level,
2 punched sections with mounting flanges
W 800 x H 2000 x D 1000 7995.969 7995.969 7995.969 7995.969
W 800 x H 2200 x D 1000 7999.970 7999.970 7999.970 7999.970
PSM busbar see page 202
Climate control for Modular Safe see page 325/326
Fire Extinguishing
water
access
Dust Theft/
burglary
Corrosive
gases
Climate control for Modular Safe/Modular Safe Extend
System accessories Page 355 Modular Safe/Modular Safe Extend Page 323/324
All climate control units are
designed as split units to
ensure hermetic separation
between the cooling circuits
inside and outside of the safe.
This prevents the ingress of
dust and corrosive gases.
Air routing inside the safe is
horizontal. The hot air is
drawn in at the rear, and the
cooled air is expelled in front
of the 482.6 mm (19) level.
Compact climate control
Suitable for use in rooms with
climate control in the building or
adequate ventilation, and low or
no noise level requirements. The
climate control unit is available
in the output categories 2.5 kW
and 4 kW.
The evaporator coil is fastened
to the side panel on the inside of
the modular safe, and the exter-
nal device on the service door
(Modular Safe Extend) or side
panel (Modular Safe).
Outdoor climate control
When using the outdoor variant,
the internal circuit of the climate
control unit is secured to the
side panel on the inside of the
safe.
The external unit is positioned
outside of the building. The
internal and external units are
connected to one another via
coolant lines and control cables.
The hot air from the servers is
drawn in at the rear of the safe,
and the cooled air is expelled in
front of the 482.6 mm (19) level.
Benefits of the outdoor model:
The waste heat is routed directly
to the outside. As a result, room
ventilation or air-conditioning is
not necessary.
with inverter technology
The external unit with inverter
technology allows targeted
speed control of the compres-
sor. The volume of refrigerant
is regulated via the electronic
expansion valve. Adaptation to
cooling requirements facilitates
energy savings of up to 40%.
The cold air is expelled in front
of the 482.6 mm (19) level by
the internal unit (evaporator
coil), while the hot air is drawn
in at the rear. Modified air baffle
plates achieve additional effi-
ciency gains and help to avoid
hot spots.
Compact climate control
Model No. SK 3126.230 3126.240
Rated operating voltage V, Hz 400/460, 3~, 50/60
Dimensions mm
W x H x D external unit 500 x 1580 x 231
W x H x D internal unit 804 x 1544 x 100
to DIN 3168
L 35 L 35
L 35 L 50
2500 W/3090 W
2070 W/2300 W
4000 W/4010 W
3020 W/3250 W
Pre-fuse T 6,3 10.0 A
Motor circuit-breaker
to DIN 3168
L 35 L 35
L 35 L 50
1275 W/1615 W
1525 W/1920 W
1620 W/2125 W
1825 W/2835 W
Refrigerant R134a,1500 g R134a, 2900 g
Temperature and setting range +20C to +55C
Noise level dB (A) < 70 < 72
Protection category to
IEC 60 529
Weight
External unit 65 kg
Internal unit 70 kg
Colour RAL 7035
Temperature control Comfort controller (factory setting +25C)
QK
.
QK/Pel
.
Climate control for Modular Safe/Modular Safe Extend
Outdoor climate control with inverter technology
Model No. SK 7999.963 7999.965 7999.964 7999.966
Redundancy
Rated operating voltage V, Hz 230 V, 50 Hz, 1~ 400 V, 50 Hz, 3~ 230 V, 50 Hz, 1~ (2 x) 400 V, 50 Hz, 3~ (2 x)
Dimensions mm W x H x D 795 x 610 x 290 900 x 680 x 340 (2 x) 795 x 610 x 290 900 x 680 x 340 (2 x)
to DIN 3168
L 25 L 35 2400 W 5000 W 2400 W 5000 W
Rated current per unit, max. 3.8 A 4.1 A 3.8 A 4.1 A
Start-up current per unit 19.5 A 35 A 19.5 A 35 A
Pre-fuse T 16 A 3 x 16 A 16 A (2 x) 3 x 16 A (2 x)
Refrigerant R410 a
Temperature and setting range 15C to +35C
Weight
External unit 38 kg 74 kg 2 x 38 kg 2 x 74 kg
Internal unit 59 kg 59 kg 63 kg 66 kg
Colour RAL 7035
Accessories
Refrigerant line incl. electric control cable for 2400 W,
length 20 m
7999.961 7999.961 7999.961 7999.961
Refrigerant line incl. electric control cable for 5000 W,
length 20 m
7999.962 7999.962 7999.962 7999.962
Model No. SK 7999.991 7999.992
Redundancy
Rated operating voltage V, Hz 230 V, 50 Hz, 1~ 230 V, 50 Hz, 1~ (2 x)
Dimensions mm W x H x D 900 x 795 x 320 900 x 795 x 320 (2 x)
to DIN 3168
L 18
1)
/L 35
L 18/L 43
7850 W
7030 W
Rated current max. 13.9 A
Start-up current 36 A
Pre-fuse T 25 A 25 A (2 x)
Refrigerant R410a
Temperature and setting range 15C to +43C
Noise level 48 49 dB (A)
Weight
External unit 63 kg 63 (2 x) kg
Internal unit 70 kg 70 (2 x) kg
Colour RAL 7035
Also required
Heat exchanger (evaporator coil) 3126.270 3126.270
2)

1)
Server inlet temperature
2)
2 heat exchangers are required.
QK
.
QK
.
Rittal Czech Republic
RITTAL Czech, s.r.o.
Ke Zdibsku 182 250 66 Zdiby u Prahy
Phone: +420 234 099 000
Fax: +420 234 099 099
E-mail: [email protected] www.rittal.cz
Data Centre Container DCC
Version R7A R7B R7C R7D R14A R14B R14C R14D R20A R20B R20C R20D
Width mm 3000
Height mm 3250
Depth mm 6055
Useful area 15.2 m
2

Model No. Project planning on request
Cooling capacity kW 7 7 7 7 14 14 14 14 20 20 20 20
Redundancy cooling 1+1 1+1 1+1 1+1 2+1 2+1 2+1 2+1 2+1 2+1 2+1 2+1
Available area mm (racks, UPS, DET-AC) 4500 4500 4500 4500 4000 4000 4000 4000 4000 4000 4000 4000
Heavy-duty raised floor
Plug-and-play power distribution
Hard ducts 2 x DN200
Security door WK 2
Optional fittings
UPS (uninterruptible power supply)
DET-AC XL fire alarm/extinguisher system
Max. no. of racks 42 U (600 mm wide) 7 6 7 6 7 6 6 5 7 6 6 5
Max. no. of racks 42 U (800 mm wide) 5 4 5 4 5 4 4 4 5 4 4 4
Higher racks (47 U)
Rack power supply (PSM, PDM)
Monitoring package (CMC)
Security door WK 3
Additional hard ducts
Metal sun shade
Standard Option
Fire protection:
Fire protection, internal
panels: F30, optionally F90
based on DIN 4102/EN 1363,
component-tested
Duct system:
Type: Hard duct DN200
Dimensions of packing space:
120 x 120 mm
Raised floor:
Substructure type:
Control room
Number of slotted plates
dependent on number of
racks
Total raised height: 300 mm
Climate control
Direct Free Cooling:
Available with 7 and 10 kW
units. Up to 3 units can be
integrated.
Targeted cooling via aisle
containment
Power distribution:
Infeed: Wall-mounted
CEE connector, 125 A,
3-phase/N/PE, 400 V/50 Hz
Enclosure dimensions
(W x H x D):
600 x 2000 x 400 mm
Note on standard and
customised solutions:
There is a standard range of
models available with 12 pre-
configured data centre types.
Ask for the Rittal Data Centre
Container project planning form.
Within just a few days, you will
receive an initial quote.
Customised solutions:
Bayed containers, higher cool-
ing outputs e.g. using LCP tech-
nology or more than seven racks
we would be happy to design
your own individual data centre
container.
Optional:
Up to seven 482.6 mm (19)
IT racks with power supply
UPS, with up to 15 minutes
autonomy
Fire alarm/gas extinguisher
system (Novec 1230)
Access systems, access door
(keyboard, code card)
Monitoring and management
(CMC, RiZone)
Detailed drawings:
Fire alarm and extinguisher system DET-AC/EFD Plus
Fire alarm and extinguisher
system DET-AC Plus
Add-on unit
DET-AC Plus Slave
Early fire detection system
EFD Plus
Width mm 482,6 (19) rack mount
Height mm 44 (1 U)
Depth mm 640 570 500
Weight kg Approx. 15 Approx. 12 Approx. 8
Model No. DK 7338.120 7338.320 7338.220
Ambient temperature (operation) +10C to +35C
Battery storage 10C to +50C
Operating voltage 100/240 V AC 50/60 Hz 24 V DC 100/240 V AC 50/60 Hz
Uninterruptible mains electricity
operation
2 x 12 V; 2.2 A/approx. 4 h
Connections
3 RJ 12 connectors for connecting to the CMC, alternatively 3 relay outputs,
max. contact load 24 V DC/0.5 A
Sensors 2 different scattered-light sensors 2 different scattered-light sensors
Display
LCD display with
plain text information

LCD display with
plain text information
No. of slave modules Max. 4 Max. 5
No. of monitored enclosures Max. 5 Max. 5
Extinguisher gas NOVEC 1230 NOVEC 1230
Fill volume of extinguisher gas 3.2 kg 3.2 kg
Admissible max. protection volume 3 m 3 m
Also required
Pipe kit 7338.130 7338.130 7338.130 Page
RJ 12 cable for alarm relaying to CMC,
packs of 2
7320.814
1)
7320.814
1)
7320.814
1)
585
Access sensors 7320.530 7320.530 583
Depth-variable slide rails 7063.883 559
1)
2 packs are required.
System accessories Page 355 Server enclosures Page 91
EFD Plus
The EFD Plus system is a com-
pact early fire detection system
with active smoke extraction
system.
The integral fan system conti-
nuously extracts the air from the
enclosure, and passes it over
two smoke detectors. The first
smoke detector is extremely
sensitive and triggers a pre-
alarm. The second smoke
detector triggers the main alarm.
DET-AC Plus
The DET-AC Plus is a compact
fire alarm and active extin-
guisher system with smoke
extraction system, built into one
height unit. The detection sys-
tem is identical to that used in
the EFD Plus system. Fire extin-
guishing with the extinguisher
gas NOVEC 1230 is automati-
cally activated when a main
alarm is triggered. With the
extinguisher gas supply pro-
vided, a volume of up to 3 m
3

can be extinguished.
DET-AC Plus Slave
In conjunction with the DET-AC
Plus slave system, up to five
bayed enclosures may be ex-
tinguished. In addition to the
DET-AC Plus unit, a DET-AC Plus
Save unit is used for each addi-
tional enclosure and contains
the extinguisher gas for one
enclosure. For detection pur-
poses, the pipework from the
DET-AC Plus system is laid in
all enclosures.
Benefits:
Early fire detection
Automatic extinguishing
Innovative extinguisher gas
NOVEC 1230
Eco-friendly
Uncritical for IT components
482.6 mm (19) rack mount
with just 1 U
Fire alarm and extinguisher system DET-AC XL
Fire alarm and extinguisher system DET-AC XL S-08-40-10 S-16-40-10 S-24-40-10 S-08-40-12 S-16-40-12 S-24-40-12
Width mm 300 300
Height mm 2000 2000
Depth mm 1000 1200
Model No. DK 7338.160 7338.161 7338.162 7338.163 7338.164 7338.165
Accessories
Nozzle piping kit for extinguisher system 7338.166 7338.166 7338.166 7338.166 7338.166 7338.166
Piping kit for smoke extraction system 7338.167 7338.167 7338.167 7338.167 7338.167 7338.167
Nozzle piping kit for extinguisher system between enclosure suites 7338.168 7338.168 7338.168 7338.168 7338.168 7338.168
Piping kit for smoke extraction system between enclosure suites 7338.170 7338.170 7338.170 7338.170 7338.170 7338.170
Pressure relief valve for enclosures 7338.171 7338.171 7338.171 7338.171 7338.171 7338.171
System accessories Page 355 Server enclosures Page 91
Standardised solution for ex-
tinguishing individual bayed
enclosure suites with up to
24 enclosures or entire rooms.
All components of the system are
built into a 300 mm wide TS 8
enclosure, facilitating optimum
baying to a suite of server en-
closures. The integral early-
warning fire detection system
with active smoke extraction
detects fire from a very early
stage. The fire is extinguished
automatically.
NOVEC 1230 is used as the
extinguisher gas.
Benefits:
Extinguisher system for room
volumes up to 84 m
Rack extinguisher system
for up to 24 racks
Suitable for incorporation into
TS 8 server rack suites
Simple project planning on
the basis of standard pack-
ages
Innovative extinguisher gas
NOVEC 1230
Eco-friendly
Uncritical for IT components
Three solutions are available
in the standard version:
For extinguishing up to:
8 racks
16 racks
24 racks
In addition, Rittal is able to
configure both room and rack
extinguisher systems to your
individual specifications.
Function principle:
The detection system of the
DET-AC XL draws room or rack
air in continuously and detects
even the tiniest smoke particles
during the initial phase of a fire,
the pyrolysis phase.
After a defined delay time, the
extinguisher gas bottle is
opened electrically and the gas
flows out into the room or racks
via the extinguisher nozzles.
330
Security rooms
Rittal Catalogue 33/IT infrastructure 331
We plan and implement
data centres
Whether you are planning a new building, an
extension or an optimisation to your data centre,
we are at your side as a trustworthy partner and
leading provider with decades of experience.
Basic protection or high-MBTF protection
for data centres
Extendible
Dismantling and reassembly =
investment protection
Dust- and noise-reduced installation
System-tested
Multi-functional risk coverage
Criterion Standards
Conven-
tional
design
2)
Basic protection
High-
MTBF
LER
Extend
LER
Basic
LSR
18.6 E
System testing Testing of the following standards as
complete system or structure
1)

Fire protection
Testing at temperatures
of up to 1000C and
above
ECBS certifications to EN 1047-2,
50 K temperature increase and 85%
rel. humidity up to 24 hours (reheating
period), 60 minutes flame impingement
time

50 K temperature rise and 85% rel. humidity over
30 minutes, without reheat period

F120 as system test, according to the limits of
EN 1363 (DIN 4102), for the cellular structure
and its built-in modules

F90 as system test, according to the limits of
EN 1363 (DIN 4102), for the cellular structure
and its built-in modules

F180 only as component testing to EN 1363
(DIN 4102), wall system only



Explosion
Detonation test as system testing of 200 kg TNT
from 40 m

Water
Standing water, 72 hours, 40 cm,
maximum 20 drops

Extinguisher water, IP x6 as system testing to
IEC 60 529, for the cellular structure and its
built-in modules

Relative humidity, 85%, over 24 hours (reheat
period), 60 minutes flame impingement time,
to EN 1047-2

Relative humidity, 85%, over 30 minutes
Dust-tightness
IP 5x as system testing to IEC 60 529, for the
cellular structure and its built-in modules

Corrosive fire gases
Acrid gas-tightness, based on EN 1634-3
(DIN 18 095)

Unauthorised access
WK 3 as system test to EN 1627/1630,
for the cellular structure and its built-in modules,
such as doors

WK 2 as system test to EN 1627/1630,
for the cellular structure and its built-in modules,
such as doors

WK 4 only as component testing to
EN 1627/1630, door system only

Falling debris
Shock test as system test,
3 shocks of 200 kg from 1.5 m after 45 minutes
flame impingement time

Shock test as system test,
1 shock of 200 kg from 1.5 m after 30 minutes
flame impingement time

EMC protection
Protection against high-frequency irradiation
and radiation, verified by tests on comparable
components by TU Aachen

EMC optional package
Extended high-frequency shielding in accord-
ance with BSI TL-03304

1)
System-tested products are tested as a complete construction. This comprises the cellular structure and installation
modules such as doors, cable shields or ventilation units. By contrast, component testing only refers to
individual parts.
2)
The conventional design refers to room structures of plasterboard, concrete and other standard construction
materials which do not offer sufficient protection for data centre applications.
Conventional designs are generally tested for use as fire walls.
332
333
Software & services
Expertise............................................................................................335
Planning..............................................................................................337
Project management .................................................................341
Configuration...................................................................................343
Monitoring..........................................................................................345
Service ................................................................................................349
Quality management.................................................................353
Training courses, seminars and workshops
See our website www.rittal.com
334
Rittal added-value
Rittal Catalogue 33/Software & services 335
Rittal system consulting
Rittal offers you more than just efficient products.
Rittal can help you to save costs throughout the
entire value creation chain. It is a question of
uncovering and tapping into hidden potential.
A whole team of Rittal experts who know exactly
what they are talking about are waiting to give
you their support. Together with your own special-
ists, they investigate the full process chain, from
initial development and engineering, through to
the actual manufacturing. Always on the lookout
for optimisation potential.
Rittal offers you an ingenious and integrated con-
cept combining consulting, software, products,
services and support. A conclusive approach, but
nevertheless open to all your individual contribu-
tions. Benefit from our proven expertise and long-
standing experience. Put our promise to the test.
Rittal has both the consultants and the
requisite know-how.
1
3
2 12
11
10
9
8
7
6
5
4
Step 1:
Analysis of current situation
Rittal follows a systematic approach to solution-
finding.
The starting point is a customer-specific analysis
of the current situation at all levels:
Products, tools and software used
Defined processes and procedures
Efficiency of the solution
Step 2:
Identify potential
The second step is to uncover the potential for
time and cost savings. An individual evaluation
scrutinises data consistency, technology effi-
ciency and the options for process optimisation.
In many cases, the first savings are already
apparent here.
Step 3:
Implement measures
With corresponding support from Rittal, the cus-
tomer can now translate the theoretical results into
concrete efficiency-boosting measures.
Rittal possesses all the necessary intelligent tools,
solutions and systems. Each component is per-
fectly integrated without compromise, without
the need for improvisation.
Step 4:
Performance review
A systematic approach is the key to significantly
enhanced efficiency. To this end, Rittal offers a
complete package (products, planning and soft-
ware, service and support). After a defined
period, we join you to review the success of the
implemented measures.
336
Planning
337 Rittal Catalogue 33/Software & services
RiCAD 3D
The download platform for seamless integra-
tion of Rittal CAD data into your plant designs
3D data for efficient planning
Regardless of which CAD system you use,
RiCAD 3D effectively supports the efficiency
and productivity of your plant design work.
It includes both 2D and 3D drawings for virtually
all Rittal products, together with an extensive
range of system accessories.
Benefits:
Precisely detailed CAD product data
Export in all standard CAD formats
Simple integration into the most varied CAD
systems
Considerable reduction of engineering and
design work
Error-free, detailed Rittal data
Generic original data in 3D and 2D format
No conversion of neutral formats
CAD data in the following formats:
DWG.3D
ProE 2001
ProE Wildfire
SolidWorks 3D
Neutral Step format
Fast online access to original data in many
other CAD formats with direct downloading
facility available at: www.rittal.com
AE Laser Express
Rittal provides a very special service: You will
receive an enclosure that has been assembled
as defined in your specifications, finished with
cut-outs and drilled holes and painted in the spe-
cial colour that you stipulated within just 7 days!
Benefits:
Send us your drawing via our Internet portal.
You will receive your quote within the next
24 hours.
Production will start as soon as we receive your
order.
Within 7 days, customers in Germany will
receive their own compact enclosure, custom-
manufactured for their particular application.
www.rittal.com
Planning
EPLAN platform
EPLAN electric P8
EPLAN pro panel
EPLAN fluid
EPLAN ppe
EPLAN cabinet
EPLAN data portal
EPLAN engineering center
All applications on the same, consistent
platform technology
Uniform project planning environment for
electrical, fluid, EI&C engineering and 3D
assembly design
Consistent project data and component
management
Modularisation for individual system
configuration
Open system architecture for seamless
system integration
Cross-platform basic functions
www.eplan.com
EPLAN electric P8
The new dimension in engineering.
Professional project planning, documentation
and administration of electrical engineering
automation projects
Optimisation of the engineering process
through standardisation, reuse and automated
circuit diagram generation
Variant technology unique, powerful,
convincing
High-end electrical project planning
process-oriented and automated
Transfer and processing of data from
upstream processes
Qualified master data ready to use
out-of-the-box
Consistent support in circuit diagram
generation
EPLAN pro panel
High-end 3D assembly layouts for electrical
and fluid design
Description of the assembly layout with virtual
3D prototypes
EPLAN eTouch technology for the simplest
handling
Positioning aids for optimum dimensioning
and utilisation of the available space
Planning confidence by taking manufacturer
data into account
50% or more time savings with layout
Early availability of precise production
documents
Precise-fit components for greater assembly
efficiency
Complete consistency with participating
engineering disciplines
Improved communications thanks to
high-quality documentation
EPLAN fluid
From drawing to engineering.
Clear project structures instead of a single
drawing
The latest symbol data based on the current
standard ISO 1219
Consistency in electro-hydraulic system
documentation
Direct connection of parts lists and hydraulic
diagrams
Automatic documentation of revisions
Planning
EPLAN ppe
For consistent engineering with process tech-
nology in mechanical and plant engineering
Professional planning and project management
of EI&C technology in process-related
machinery and plant
Generation of plant overviews, P&I diagrams,
administration of PIC points, and documen-
tation
Smooth-running interdisciplinary cooperation
thanks to deep platform integration
Optimum support for both preplanning and
detailed planning
EPLAN cabinet
Efficient enclosure production in the product
development process
Transfer of equipment and wiring information
from the upstream electrical design
3D configuration of mounting plates and enclo-
sures
Automatic calculation of optimum wiring routes
and wire lengths
Transfer of production data to NC machines
Transfer of assembly data to wire assembly
machines
High-quality product data thanks to links with
RiCAD 3D
EPLAN data portal
Web-based supply of high-quality equipment
data.
Seamless integration into the EPLAN platform
Fast project planning with no media inter-
ruptions
Minimal effort required for master data
maintenance
Enhanced quality, thanks to high-quality
templates
Extensive additional information
Multi-lingualism at no extra cost
Uniform layout and complete documentation
EPLAN engineering center
Functional engineering for unimaginable
productivity benefits.
Functional engineering is the crucial link
between sales, design and service
Existing projects indicate potential savings of
up to 80%
EPLAN EC guarantees rapid commissioning
on the basis of tested, standardised machine
functions
Cross-disciplinary engineering minimises the
need for coordination and speeds up the time
to market
EPLAN EC proves that: module-based engi-
neering cuts costs and permanently improves
quality
The EPLAN EC automatisms prevent the usual
last minute changes from becoming a project
cost trap
A central database ensures engineering
expertise and allows rapid induction during
peak project times
340
Project management
Therm 6.1 software
The Therm 6.1 software package takes care of the
complex calculation of climate control require-
ments. A user-friendly interface guides the opera-
tor to the most suitable, correctly dimensioned
climate control component.
All evaluations are closely based on the require-
ments of IEC/TR 60 890 AMD 1/02.95 and
DIN 3168 for enclosure cooling units.
Rittal Therm 6.1 is a calculation program
for enclosure climate control.
Improved user guidance via tabs and simple
selection menus
Express and expert versions
Configurator for recooling systems
Heat loss calculator for busbars
Key calculation data is visible at all times
Internet updates
Fast and thorough determination of the required
climate control measures
Determining the correct climate control meas-
ures leads to cost savings
Easy calculation of the required actual cooling
output, as well as any upgrades or enhance-
ments to the switchgear
Detailed documentation is supplied with the
calculation
Supply includes:
CD-ROM, with 19 languages
1 3121.000
Note:
Your free 30-day trial version may be down-
loaded at www.rittal.com
Rittal Power Engineering
Planning software for RiLine60 busbar sys-
tems and Ri4Power low-voltage switchgear
with design certificate
The multi-lingual software package includes the
following functions:
Project handling, from the initial enquiry through
to ordering
Configuration of RiLine60 busbar systems in the
Top enclosure system TS 8. Compact enclo-
sures AE, CM, KS and free-standing enclosure
ES 5000.
Configuration of low-voltage switchgear with
Ri4Power systems Form 1-4 and ISV
Complete, automatic function for the genera-
tion of bills of materials and a calculation pro-
gram for quote preparation
Input and evaluation of assembly times to cal-
culate man hours
Access to the entire range of Rittal products
Output of automatically generated plant docu-
mentation with rated current and heat loss
calculation
Generation of special fields configured by
the customer with graphical processing in the
CAD view
Import/export interfaces for product and
CAD data
Export function for order lists and bills of mate-
rials in Excel format
Interface to EPLAN Electric P8, for the export
of CAD data and bills of materials
The extra benefit for engineering and planning
offices: Output of detailed tender texts based
on plants that have been project-planned in
Power Engineering in MS Word format.
Output of project-specific assembly plans
together with field and plant definitions
Integral configurator for the generation of
drawings and bills of materials to create con-
nector kits for connecting open air circuit-
breakers (ACB).
Supply includes:
CD-ROM
Languages: German/English/French/Dutch/Dan-
ish/Swedish/Czech/Italian/Spanish/Polish/Russian
Packs of Model No. SV
1 3020.500
342
Configuration
TS 8 configurator
A complete enclosure configured in just eight
clicks, including parts list and 3D model.
Benefits:
Easy menu-assisted configuration of a bayed
TS 8 enclosure with base/plinth, side panels
and the handle system required
Mounting rails and punched sections with mounting
flanges can be pre-assembled for interior installation
This will produce a 3D drawing that can be
incorporated directly into the system design or
integrated into EPLANCabinet
www.rittal.com
Command panel configurator
Optimised, coordinated solutions for the human/
machine interface based on Rittal Comfort Panel
and Optipanel.
Benefits:
Select the enclosure that holds the panels to
be used (the integrated database contains a
variety of commercial panels from various
manufacturers)
Easy navigation thanks to the list of related
questions
Quick compilation of the features required
Request a quote based on the selected data
Request the 3D data for integration in the
system design
www.rittal.com
Support arm configurator
The system is able to precisely define the correct
support arm system using important user-specific
parameters such as the jib length, enclosure
weight or required cable cross-section.
Benefits:
Individual assembly tailored to the users
specific requirements
Integrated consistency checking
Configured system parts list
www.rittal.com
CM configurator
Rittal CM compact system enclosures combine
the advantages of the AE compact system enclo-
sure with the configuration diversity of the TS 8
top enclosure system.
Benefits:
Simple menu-assisted selection of a CM enclo-
sure together with a base/plinth and gland
plates that meet the requirements
The relevant interior installation accessories can
also be selected to match the chosen enclosure
The end result will enable you to request a
quote that reflects the actual configuration
selected
www.rittal.com
Subrack configurator
Generate a component-based order list for a
subrack in just a few clicks.
Benefits:
Fast, reliable selection of individually coordi-
nated systems in the Ripac Easy and Ripac
Vario series
Simple prompt masks reliably create techni-
cally feasible solutions with error-free order lists
Intelligent plausibility checking of admissible
component combinations
Request a quote based on the order list
generated
Parts list for the configured subrack
www.rittal.com
IT configurator
Rittal offers the ideal system solution for every net-
working task, matched to the users individual
demands.
Benefits:
A specific enclosure can be selected
Accessories can be configured
Plausibility checking
The end result will enable you to request a
quote that reflects the actual configuration
selected
www.rittal.com
344
Monitoring
RiZone Appliance Standard
RiZone is supplied as an appliance or a software
appliance.
As an appliance, RiZone is supplied with global
support, installed on a powerful server. The soft-
ware appliance is available as a virtual server
which can easily be used on existing hardware in
the data centre.
Also required:
RiZone Appliance IP node licence according to
the number of IP nodes available
Standard version Model No. DK
Hardware appliance
1)

Server with Windows RiZone software RiZone graphics tool
7990.101 7990.201 7990.301
Software appliance
1)
Hard drive + Windows RiZone software RiZone graphics tool
7990.103 7990.203 7990.303
1)
All Model Nos. on the same line belong together, and must always be ordered together.
RiZone Appliance
IP node licence
The flexible RiZone licence model allows opti-
mum adaptation to any project size, while at the
same time allowing the opportunity to grow with
the data centre.
The volume licences for the IP nodes are gradu-
ated from 10 to 1000 nodes and may be adapted
precisely to the size of the data centre. For each
active component or other SNMP-compatible
component to be covered, one node licence is
required.
For no. of
IP nodes
1)

Console
licences
included
Model No. DK
RiZone
software
RiZone
graphics tool
10 2 7990.205 7990.305
25 4 7990.206 7990.306
50 4 7990.207 7990.307
100 8 7990.208 7990.308
250 10 7990.209 7990.309
500 15 7990.210 7990.310
1000 20 7990.211 7990.311
1)
All Model Nos. on the same line belong together,
and must always be ordered together.
Monitoring
Client Access licence
Additional licence for operation of another RiZone
console.
Model No. DK
Client Access
1)
RiZone
software
RiZone
graphics tool
7990.213 7990.313
1)
All Model Nos. on the same line belong together,
and must always be ordered together.
RiZone module SNMP support
for units from
other manufacturers
For the incorporation of SNMP-compatible units
from other manufacturers into RiZone. With MIB
browser.
Extension Model No. DK
RiZone SNMP support for units
from other manufacturers
7990.014
Microsoft Operations Manager
Management Pack
For integrating RiZone into the Microsoft Opera-
tions Manager.
Extension Model No. DK
Microsoft SCOM
Management Pack
7990.012
Monitoring
RCCMD software
Client software to control the server shutdown via
the PMC UPS. The software supports all common
operating systems and versions (e.g. Windows 7,
VISTA, XP, Server 2003/2008, UNIX/LINUX and
VMWARE Sphere/ESX Server, CITRIX XEN etc).
One licence is required for each server to be shut
down on an event-controlled basis.
Note:
Software updates and a complete list of currently
supported operating systems may be found at
www.rittal.com.
Licences Model No. DK
Single licence 7857.421
Licence bundle (5 servers) 7857.423
Licence bundle (25 servers) 7857.424
RiDiag II
For the diagnosis, maintenance and long-term
data capture of TopTherm units with Comfort con-
troller. RiDiag logs equipment data and prepares
an error list. RiDiag also offers the option of dis-
playing and setting the devices operating para-
meters. The logging of measurement data can be
tracked in real time in the form of a diagram.
Supply includes:
CD-ROM
Languages: German/English/Italian/French/
Spanish/Portuguese
Connection cable
1 3159.100
348
Service Global availability
Rittal Global Service: Always on hand, whenever you need us!
Perfect service for individual requirements, all from a single supplier. That's Rittal Global Service.
Wherever in the world you use our products, we are happy to ensure that every aspect of Rittal The
System. is exactly as it should be. With this in mind, every minute and every kilometre counts when
it comes to service. We have set up five strategic service hubs to ensure proximity to our customers:
In Germany, the USA, Brazil, China and India. Every hub forms the central heart of our regional service
organisations and ensures rapid response times (on-site service engineers) and efficient service
handling.
Faster
Short paths, fast communications:
Thanks to regional service support points
A perfect interplay between sales,
project management and service
Better
Individual service solutions from a single source
A high standard of qualifications among Rittal
service technicians worldwide
A uniform global service ticket system
Worldwide
5 strategic service support points
Service representation in more than
60 subsidiaries
More than 250 service partners and over
1000 service technicians
Rittal Europe (Herborn)
Rittal North America (Urbana)
Rittal South America (So Paulo)
Rittal Asia-Pacific (Shanghai)
Rittal Middle East (Bangalore)
[email protected]
+49(0)2772 505 1855
[email protected]
+1 (800) 477 4000 Option 3
[email protected]
+55 11 36 22 23 77
[email protected]
+86 800 820 0866
[email protected]
+91 80 22 890 78
Around the globe, we can be contacted 365 days a year
on the following numbers:
Service from a single partner
24/7/365 service availability
Highly qualified service specialists
Service engineers on site within 8 hours
Automated incident and emergency management
Individual availability of spare parts
Global service ticket system
350
Services
Individual service throughout the entire product lifecycle
Rittals added value begins with the perfect qual-
ity of our products, and extends throughout every
phase, from planning and commissioning, right
through to support and servicing once the system
is up and running.
The added extra for customers with the Rittal
system: Firstly, our comprehensive global service
network, which complements the high quality and
reliability of our products. And secondly, an ex-
tended guarantee above and beyond the statu-
tory warranty for defects, thereby ensuring maxi-
mum availability during operation.
We have developed a range of individual service
offerings for our customers, so that every poten-
tial requirement profile is covered.
In this way, we permanently ensure the systems
productivity on behalf of our customers. Services
play a decisive role in our lifecycle management
approach. You decide for yourself which service
you need.
We are committed to perfection at every phase
PRE-SALES IMPLEMENTATION AFTER-SALES
Advice/information
Requirement analysis
(on site)
Load tests
Simulation and calculation
Thermal imaging
Laboratory testing in our
own accredited laboratories
Project meeting
Prototyping
Planning/team-building
(sales, service, project
management, quality
assurance, customer)
Installation/integration
Assembly and system
connection
Commissioning/parame-
terisation
Final inspection and
handover
Instruction (training)
Site coordination/project
management
Certification
Service contracts
Training
Inspection, maintenance/
servicing, repair
Management/sale of spare
parts
Round-the-clock availability
Thermal analyses
Flexible service contracts:
The right solution to suit every requirement.
Rittal Global Service is just as flexible and individual as your requirements.
An overview of the features of the various Rittal service packages:
Availability Response time
Spare parts
availability
Repair
Warranty
extension
BASIC Business hours Next working day Standard 1 x per annum Optional
COMFORT Business hours Next day Standard 2 x per annum Optional
ADVANCED
24 hours
365 days a year
Next day 24 hours 2 x per annum Yes
FULL
24 hours
365 days a year
8 hours
Individual
concept
Individual
(at least 2 x/annum)
Yes
CUSTOMIZED Individual by arrangement
Warranty extension
Rittal products are always an excellent choice. Day after day, around the globe, they prove their high
quality and reliability in tough industrial production environments. With regular preventive maintenance,
you can help to further extend the product's service life and the cost-effectiveness of your plant.
Anyone purchasing an Advanced or Full contract will be rewarded with a 1 to 3-year warranty
extension, up to a maximum of 5 years. With Basic, Comfort and Customized contracts, warranty
extensions are optional.
352
Quality management
Quality management is a must. Quality philosophy is an attitude.
Rittal The System. stands for consistent quality management and on-going refinements to
products, services and internal processes.
Rittal quality management ensures that regulations and standards are observed, and individual cus-
tomer requirements are met. In addition to this, we also define our exacting product quality demands
in supplementary Rittal standards. The consistent Rittal quality philosophy guarantees perpetually high
standards and ensures the global usability of all products with countless international approvals and
licences.
Alongside product quality, we also focus on process and service quality.
All internal processes are continuously refined by quality control groups, and reviewed during in-house
audits. Each year, our improvements and high standards are verified by countless successful external
system and customer audits.
Rittal offers support from day one
Project planning of technical specifications
Prototype assembly, testing and simulations
Manufacturing and assembly
Warehousing service and on-time delivery
Your own personal point of contact throughout
the entire project
Accredited Rittal test laboratory in Germany
Simulation of climatic conditions
Dynamic and static load tests
3D measurement
Particle density testing
Hosed water tests
Salt spray tests
Electrical safety and function tests
Performance testing of all active products
Various material tests
354
355
System accessories
Enclosures
Base ..........................................................................................................358
Walls..........................................................................................................385
Baying system...........................................................................................394
Doors/locks................................................................................................402
Roof/wall mounting....................................................................................431
Interior installation .....................................................................................443
Voltage supply...........................................................................................505
Cable management ...................................................................................511
482.6 mm (19) installation system............................................................543
Monitoring
CMC III sensors.........................................................................................583
CMC III accessories ..................................................................................584
KVM switches ............................................................................................591
Dynamic Rack Control...............................................................................597
Human/machine interface
Handles .....................................................................................................600
External mounting accessories .................................................................602
Front assembly ..........................................................................................604
Monitors.....................................................................................................606
Keyboards, supports and drawers............................................................608
Interfaces...................................................................................................616
Signal pillars ..............................................................................................618
356
357
System accessories for enclosures
Base
Flex-Block base/plinth...............................................................................358
TS base/plinth............................................................................................360
Base/plinths...............................................................................................368
Base ..........................................................................................................373
Walls
Side panels................................................................................................385
Divider panels/partitions............................................................................389
Isolator door locking..................................................................................393
Baying system
Enclosure suites ........................................................................................394
TS 8 corner enclosures .............................................................................401
Doors/locks
Door variants .............................................................................................402
Viewing panels/operating panels ..............................................................407
Lock systems.............................................................................................411
Hinges .......................................................................................................425
Door, internal .............................................................................................426
Roof/wall mounting
Roof ...........................................................................................................431
Wall mounting bracket...............................................................................439
Interior installation
Mounting plates.........................................................................................443
Rail systems ..............................................................................................452
Assembly components..............................................................................471
Component shelves...................................................................................480
System lights .............................................................................................491
EMC...........................................................................................................498
Earthing .....................................................................................................501
Socket strips..............................................................................................505
Cable management
Cable entry ................................................................................................511
Gland plates ..............................................................................................514
Cable glands .............................................................................................519
Cable management ...................................................................................525
482.6 mm (19) cable routing....................................................................537
482.6 mm (19) installation system
Swing frame...............................................................................................543
Mounting angles........................................................................................549
Mounting kits for mounting angles ............................................................555
Accessories for Data Rack........................................................................558
Slide rails ...................................................................................................559
482.6 mm (19) installation........................................................................562
Patch panels..............................................................................................569
Splicing boxes...........................................................................................572
LSA connection system.............................................................................574
Base
Flex-Block base/plinth system
358 Rittal Catalogue 33/System accessories
Flex-Block
for TS
For fast, toolless assembly
Individual cable management
Fully symmetrical base/plinth
Base/plinth height: 100 mm
Solid, RAL 9005
Solid, RAL 7035
Vented in enclosure width, RAL 7035
For enclosure size mm Packs of Model No. SO
400 500 1 8001.450
400 600 1 8001.460
600 500 1 8001.650
600 600 1 8001.660
600 800 1 8001.680
800 400 1 8001.840
800 500 1 8001.850
800 800 1 8001.880
800 1000 1 8001.800
1000 400 1 8001.040
1000 500 1 8001.050
1000 600 1 8001.060
1200 400 1 8001.240
1200 500 1 8001.250
1200 600 1 8001.260
1200 800 1 8001.280
1600 400 1 8001.940
1800 500 1 8001.950
For enclosure size mm Packs of Model No. SO
600 600 1 8001.665
600 800 1 8001.685
600 1000 1 8001.605
600 1200 1 8001.625
800 800 1 8001.885
800 1000 1 8001.805
800 1200 1 8001.825
For enclosure size mm
Packs of Model No. SO
Width
mm
Depth
mm
600 600 1 8001.661
600 800 1 8001.681
600 1000 1 8001.601
600 1200 1 8001.621
800 600 1 8001.861
800 800 1 8001.881
800 1000 1 8001.801
800 1200 1 8001.821
Flex-Block base/plinth system
Base
Baying clip
for baying the Flex-Block corner pieces
Simply insert the clip from behind into the
recesses provided (no need for tools).
Material:
Fibreglass-reinforced polyamide
12 8000.100
Adaptor sleeve
for levelling feet and twin castors
To hold levelling feet and twin castors on the
Flex-Block
12 8000.500
Base
TS base/plinth
Modular base/plinth diversity
Regardless of the enclosure depth:
The base/plinth components at the front and rear,
pre-configured with corner pieces, are always the
same for the chosen width.
Only the side trim panels are selected according
to the enclosure depth and the required base/
plinth configuration. The modular concept pro-
duces exceptional advantages in terms of cost
and function.
Mounting on the enclosure is conveniently carried
out from the outside. The base/plinth interior offers
diverse opportunities for mounting levels for cable
management.
One Model No.
for the
base/plinth trim,
side.
A complete
base/plinth
TS.
One Model No.
for the
base/plinth compo-
nents front and rear.
Function and cost benefits
Fewer parts, more opportunities, lower purchas-
ing, storage and assembly costs this is the for-
mula behind the new modular base/plinth system.
The following table shows three bayed base/
plinths in 200 mm height illustrating a wide range
of possible solutions and the potential savings
with trim panels compared with the previous
200 mm base/plinth system each with two trim
panels of 100 mm height at the sides.
New supply includes Functional benefits
Savings potential compared
with twelve 100 mm trim panels
3 packs of base/plinth components
1 pack of base/plinth trim panels
200 mm high
Continuous cable chamber 2 trim panels 200 mm
200 mm high
100 mm high
1 pack of base/plinth baying brackets
TS 8601.100 (packs of 20)
4 are required for this solution.
Additional stabilisation for transporta-
tion purposes with base/plinth trim
rotated through 90
2 trim panels 200 mm
2 packs of base/plinth trim panels
200 mm high
Shielding of the base/plinths in
relation to one another
200 mm high
100 mm high
Additional connection of the base/
plinths
Other options:

Cable entry at the side by mounting a 100 mm base/plinth trim panel (top or bottom).
Cable entry from the rear by dismantling one or more trim panels of the base/plinth components.
Cable clamp rail fitted on the 100 mm high trim panel.
Base/pl.
height
Basic form Cable gland options
Stabilisation of bayed
base/plinth
100 mm
200 mm
TS base/plinth
Base
front and rear
Sheet steel
for TS, CM, TP, PC, IW, TE
Base/plinth component consisting of one trim
panel and two pre-configured corner pieces.
In 200 mm high base/plinth components, one
trim panel is divided into two for cable entry.
Material:
Base/plinth components: Sheet steel
Cover caps: Plastic
Surface finish:
Spray-finished
Colour:
Cover caps: RAL 9005/7035
Supply includes:
1 set =
2 base/plinth components, 4 cover caps,
4 screws and captive nuts M12
for mounting on the enclosure.
Accessories:
Base mounting plate SO 2817.000,
see page 364.
Filter mat for vented versions,
see page 366.
Detailed drawings:
100 mm high, colour: RAL 7022
For
enclosure width
mm
Design Model No. TS
300 Solid 8601.915
400 Solid 8601.400
500 Solid 8601.500
600 Solid 8601.600
800 Solid 8601.800
850 Solid 8601.850
1000 Solid 8601.000
1100 Solid 8601.300
1200 Solid 8601.200
1600 Solid 8601.920
1800 Solid 8601.980
For
enclosure width
mm
Design Model No. TS
300 Solid 8601.905
600
Solid 8601.605
Vented 7825.601
Vented with
designer cover
7825.603
800
Solid 8601.805
Vented 7825.801
Vented with
designer cover
7825.803
For
enclosure width
mm
Design Model No. TS
600
Solid 8601.602
Vented with
designer cover
7825.605
800
Solid 8601.802
Vented with
designer cover
7825.805
For
enclosure width
mm
Design Model No. TS
300 Solid 8602.915
400 Solid 8602.400
500 Solid 8602.500
600 Solid 8602.600
800 Solid 8602.800
850 Solid 8602.850
1000 Solid 8602.000
1100 Solid 8602.100
1200 Solid 8602.200
1600 Solid 8602.920
1800 Solid 8602.980
For
enclosure width
mm
Design Model No. TS
300 Solid 8602.905
600 Solid 8602.605
800 Solid 8602.805
Base
TS base/plinth
Sheet steel
for TS, CM, TP, PC, IW, TE
For mounting between the base/plinth compo-
nents. At 200 mm height, two 100 mm base/plinth
trims may be used. Base/plinth trim (100 mm
high) may be installed rotated through 90 in
order to stabilise bayed base/plinth components.
Material:
Sheet steel
Surface finish:
Spray-finished
Supply includes:
1 set =
2 base/plinth trim panels, including parts for
attaching to the base/plinth components.
Also required:
Base/plinth baying brackets TS 8601.100,
see page 362,
when mounting base/plinth trim panels rotated
through 90.
Accessories:
Fastening bolts for base/plinth,
see page 364.
Detailed drawings:
For enclosure depth
mm
Model No. TS
300 8601.030
400 8601.040
500 8601.050
600 8601.060
800 8601.080
For enclosure depth
mm
Model No. TS
600 8601.065
800 8601.085
1000 8601.015
1200 8601.025
For enclosure depth
mm
Model No. TS
800 8601.086
1000 8601.010
1200 8601.026
For enclosure depth
mm
Model No. TS
300 8602.030
400 8602.040
500 8602.050
600 8602.060
800 8602.080
For enclosure depth
mm
Model No. TS
600 8602.065
800 8602.085
1000 8602.015
1200 8602.025
Base/plinth baying brackets
for TS base/plinth
Essential if the trim panels are mounted rotated
through 90 for additional stabilisation during the
transportation of bayed enclosures.
Additionally required for each trim panel: 2 units.
Material:
Sheet steel
Surface finish:
Zinc-plated
Supply includes:
Screws M8 x 16 mm.
20 8601.100
TS base/plinth
Base
Cable chamber
for TS
With integral system punchings for individual
system accessories. Height = 200 mm.
Material:
Sheet steel
Colour:
RAL 7035
Supply includes:
Sheet steel trim panels front and rear
Assembly parts for mounting on the enclosure.
Accessories:
Side panels for cable chamber,
see page 363.
Detailed drawings:
For enclosures
Model No. TS
Width mm Depth mm
400 500 8600.455
400 600 8600.465
600 500 8600.655
600 600 8600.665
800 500 8600.855
800 600 8600.865
1200 500 8600.255
1200 600 8600.265
Side panels
for cable chamber
Material:
Sheet steel
Colour:
RAL 7035
Supply includes:
Assembly parts.
For
enclosure depth
mm
500 2 8600.510
600 2 8600.520
Transport castors
for TS base/plinth
For locating onto the base/plinth corner piece
100 or 200 mm high.
Load capacity:
Maximum permissible load per twin castor:
Static: 100 kg
Supply includes:
1 set =
4 twin castors,
2 x with, 2 x without locks.
Colour:
RAL 7022
Also required:
Base/plinth trim panels, side,
see page 362.
Floor clearance
mm
Model No. TS
100 8800.390
Base
TS base/plinth
Base mounting plate
for
TS base/plinth
base/plinth, complete
For fastening the base/plinth to the floor without
moving the enclosure or the bayed enclosure
suite. For assembly screws up to 12 mm .
Material:
Sheet steel
Surface finish:
Zinc-plated
10 2817.000
Fastening bolts
for
TS base/plinth
Base/plinth, complete
For mounting on base/plinth trim panels, side.
The lockable assembly bolt allows the installation
of cable clamp rails. Tighten with hex spanner,
width across flats 19 mm.
Material:
Hexagon steel
Surface finish:
Zinc-plated
Accessories:
Cable clamp rail,
see page 527.
Base/plinth trim panel
mm high
Packs of Model No. SZ
100 10 2819.000
200 10 2819.200
6
71
1
7
1
)
1
6
7
1
)
1)
Only for height 200 mm
Levelling component
for TS base/plinth
For retrospective levelling of floor unevenness at
the installation site up to a maximum of 15 mm.
Installed through the corner piece of the base/
plinth component. Adjusted using a SW 19 hex
spanner.
Benefits:
A door offset caused by uneven flooring can
be corrected.
Installed on the assembled enclosure,
i.e. no need to plan levelling in advance.
Max. admissible static load:
2500 N per levelling component
(check the load capacity of the floor).
Supply includes:
Assembly parts.
For
base/plinth height
mm
100 4 2891.000
200 4 2892.000
TS base/plinth
Base
Cover cap
for TS base/plinth components
As a replacement.
Material:
Plastic ABS
Colour:
RAL 9005
For
base/plinth height
mm
100 4 8601.130
200 4 8601.140
Base/plinth trim
with brush strip
for TS base/plinth
To supplement the modular base/plinth concept.
May also be exchanged retrospectively for the
front or rear trim panel of the base/plinth compo-
nents 100 mm high.
Open on one side for retrospective mounting if
cables have already been inserted.
Material:
Sheet steel
Surface finish:
Spray-finished
For
base/plinth width
mm
Height
mm
Colour
RAL
Model No. TS
600 100 7035 7825.607
800 100 7035 7825.807
600 100 9005 7825.608
800 100 9005 7825.808
Connecting plinth trim
for TS base/plinth
For covering gaps in bayed back-to-back or cor-
ner enclosure suites. Simply push in between the
trim panel and the corner piece before tightening
the screws.
Material:
Sheet steel
Note:
For a base/plinth height of 200 mm, 2 trim panels
must be fitted one above the other.
For
base/plinth height
mm
Colour
RAL
100 7022 2 8601.110
Base
TS base/plinth
Base/plinth trim
for TS base/plinth
To continue the design of the
lower front door of PC enclosures
door of the IW enclosure.
The base/plinth trim is screw-fastened to the
corner pieces of the TS base/plinth components
from the outside.
Material:
Sheet steel, spray-finished
Designer trim panels: Extruded aluminium section
Colour:
RAL 7015
Designer trim panels: RAL 7035
For
base/plinth width
mm
Height
mm
Model No. PC
600 200 8360.920
592
1
0
0
5
6
280
9
2
1
2
362
4
5
.
2
for PC-TS, IW
Design-coordinated with the enclosures,
height 100 mm, with front projection.
Material:
Sheet steel, 2.0 mm
Colour:
RAL 7035
Design component, front: RAL 7015
Supply includes:
1 design component, front
1 base/plinth component, rear
2 base/plinth trims, side
Accessories:
Attachment opportunities for:
Twin castors DK 7495.000,
see page 374,
Levelling feet PS 4612.000,
see page 373.
Fastening bolt for cable clamp rails
SO 2819.000,
see page 364,
Support bracket PS 4183.000,
see page 473.
For depth
mm
Model No. PC
600 8800.920
Filter mat
for
Base/plinth component, vented
Base/plinth component, vented,
with designer trim panel
To cover the trim panel in the base/plinth compo-
nent.
The mounting frame slides into position behind
the filter mat in the base/plinth trim panel.
Filter class G3 to DIN EN 779.
Supply includes:
Mounting frame.
For
enclosure width
mm
600 1 7561.500
800 1 7581.500
Spare filter mat
Spare filter mat for base/plinth trim panels up to
800 mm wide.
Spare filter mats 5 7582.500
TS base/plinth
Base
front and rear
Stainless steel
for TS
Material:
Surface finish:
Brushed, grain 400
Supply includes:
Mounting accessories for mounting on the enclo-
sure.
100 mm high:
2 trim panels front/rear
200 mm high:
2 corner pieces with removable trim panel
1 trim panel front/rear
Accessories:
Base/plinth trim, modular (perforated plate),
see page 367.
For
enclosure width
mm
Height
mm
Model No. TS
600 100 8701.600
800 100 8701.800
1000 100 8701.000
1200 100 8701.200
600 200 8702.600
800 200 8702.800
1000 200 8702.000
1200 200 8702.200
Stainless steel
for TS
For mounting between the base/plinth compo-
nents. At 200 mm height, two 100 mm base/plinth
trims may be used.
Base/plinth trim (100 mm high) may be installed
rotated through 90 in order to stabilise bayed
base/plinth components.
Material:
Surface finish:
Brushed, grain 400
Supply includes:
2 base/plinth trim panels, including parts for
attaching to the base/plinth components.
Also required:
Base/plinth baying brackets TS 8601.100,
see page 362,
when mounting base/plinth trim panels rotated
through 90.
Accessories:
Fastening bolts for base/plinth,
see page 364.
see page 373.
Detailed drawings:
For
enclosure depth
mm
Height
mm
Model No. TS
400 100 8701.040
500 100 8701.050
600 100 8701.060
400 200 8702.040
500 200 8702.050
600 200 8702.060
Base/plinth trim, modular
for
TS base/plinth
base/plinth, complete, stainless steel
For cable routing in the stainless steel base/plinth,
e.g. if levelling feet SO 2890.000 or SO 2890.000,
see page 371, are used.
Width: 175 mm.
Material:
Supply includes:
4 base/plinth trim panels.
Note:
One base/plinth trim panel is needed per 200 mm
base/plinth width.
Accessories:
Cable tie SZ 2597.000,
see page 530.
For
enclosure depth
mm
400 4 2907.000
500 4 2908.000
600 4 2913.000
Base
Base/plinths
Transport plinth
for TS
For the transportation of heavy, bayed enclosure
suites. Available in 200 mm increments from
2 to 5 m.
Transport plinths can have 2 tubes welded to
receive cross-bars for transportation.
Variable punchings to suit all enclosure widths of
600 mm and above.
Surface finish:
Primed in reddish-brown rust-inhibiting paint,
optionally spray-finished.
Supply includes:
With transport tubes.
Note:
Please state the required width and depth of the
enclosure suite when ordering.
For mounting on the TS base frame
Transport plinth depth = enclosure depth 31 mm
Colour Packs of Model No. SO
Primed, reddish-brown rust-inhibiting paint 1 1228.010
Similar to RAL 7022 1 1228.110
T
3
0
0
2
7
0
1
0
0
0
B
Concrete base/plinth
for CS Toptec, CS modular and
basic enclosures
The base/plinth is made from pre-cast concrete
sections which are easily fitted in situ. Front/rear
base/plinth plate screw-fastened from the inside
may be removed for servicing purposes.
Overall height: approx. 1000 mm,
Excavation depth: approx. 700 mm.
Material:
Light-weight concrete
Surface finish:
Untreated
Supply includes:
1 base plate
2 side parts
2 divided base/plinth plates
Assembly parts and fastening screws for
mounting the enclosure.
For CS modular and basic enclosures
Model No. CS
Width (B)
mm
Depth (T)
mm
600 400 9765.182
600 500 9765.082
600 600 9765.083
800 400 9765.088
800 500 9765.084
800 600 9765.085
1200 400 9765.089
1200 500 9765.086
1200 600 9765.087
For CS Toptec
Model No. CS
Width (B)
mm
Depth (T)
mm
600 600 9765.071
800 600 9765.072
Base/plinths
Base
Sheet steel
for AE, TP, ES
Trim panels at the front and rear with fitted corner
pieces and side trim panels.
Material:
Sheet steel
Surface finish:
Spray-finished
Colour:
RAL 7022
Supply includes:
sure.
100 mm high:
4 corner pieces
2 trim panels, side
200 mm high:
4 corner pieces
1 trim panel front/rear x 200 mm
2 trim panels front/rear x 100 mm
4 trim panels, side
Base/plinth for ES, TP universal console, 100 mm high
Base/plinth for AE, 100 mm high
Accessories:
Fastening bolt,
see page 364.
Base mounting plate,
see page 364.
Base/plinth for ES, TP universal console, 200 mm high
Base/plinth for AE, 200 mm high
Detailed drawings:
For enclosures/consoles
Base/plinth
depth
mm
Model No.
SO
Width (B)
mm
Depth (T)
mm
600 400 350 2804.200
600 500 450 2807.200
800 400 350 2823.200
800 500 450 2829.200
1000 400 350 2909.200
1200 400 350 2836.200
1200 500 450 2839.200
1600 400 350 2905.200
1800 500 450 2903.200
For enclosures
Base/plinth
depth
mm
Model No.
SO
Width (B)
mm
Depth (T)
mm
600 300 279 2816.200
800 300 279 2818.200
1000 300 279 2801.200
For enclosures/consoles
Base/plinth
depth
mm
Model No.
SO
Width (B)
mm
Depth (T)
mm
600 400 350 2805.200
600 500 450 2808.200
800 400 350 2824.200
800 500 450 2830.200
1000 400 350 2910.200
1200 400 350 2837.200
1200 500 450 2840.200
1600 400 350 2906.200
1800 500 450 2904.200
For enclosures
Base/plinth
depth
mm
Model No.
SO
Width (B)
mm
Depth (T)
mm
600 300 279 2826.200
800 300 279 2828.200
1000 300 279 2802.200
32.5 32.5
100
125
100
125
62.5 62.5
8.5
14
30
18 x 14
3
7
.
5
1
2
.
5
T
2
2
.
5
5
2
.
5
2
5
5
2
.
5
2
5
3
7
.
5
1
2
.
5

3
0
5
0
B
9
8
1
0
0
2
9
8
9
8
2
0
0
Base/plinth, 100 mm high
Base/plinth, 200 mm high
Base
Base/plinths
Stainless steel
for ES, PC-ES stainless steel,
AP stainless steel
Material:
Surface finish:
Brushed
Supply includes:
sure.
100 mm high:
2 trim panels, side
200 mm high:
2 corner pieces with removable trim panel
1 trim panel front/rear
4 trim panels, side
Accessories:
Levelling feet,
see page 371.
Base/plinth trim, modular (perforated plate),
see page 367.
100 mm high 200 mm high
For enclosures
Model No.
SO
Width mm Depth mm
600 400 2865.000
600 500 2868.000
600 600 2855.000
800 400 2869.000
800 500 2866.000
800 600 2856.000
1000 400 2867.000
1200 400 2870.000
1200 500 2860.000
For enclosures
Model No.
SO
Width mm Depth mm
600 400 2875.000
600 500 2876.000
800 400 2878.000
800 500 2879.000
800 600 2880.000
1000 400 2885.000
1200 400 2886.000
1200 500 2887.000
Transport castors
for base/plinth, complete, sheet steel
For locating onto the base/plinth corner piece
100 or 200 mm high by raising or tilting.
Load capacity:
Maximum permissible static load:
100 kg per twin castor
Colour:
RAL 7022
Supply includes:
1 set =
4 twin castors,
2 x with, 2 x without locks.
Floor clearance
mm
Model No. PS
60 4570.000
Cross member
for TS, CM, TP, PC, IW, ES
adjustable
To increase stability
Height 70 mm
Adjustable from the enclosure depth
To increase stability, the cross member is posi-
tioned 138 mm above the base frame of the
enclosure at the front and rear. For deeper enclo-
sures, the rear part may be extended and screw-
fastened again. For screw-fastening to the floor
and enclosure with mounting hole at the sides,
front and rear. The castors and levelling feet may
be secured to the welded nuts M12.
Material:
Sheet steel
Surface finish:
Spray-finished
Colour:
RAL 7015
Accessories:
Attachment opportunities for
Twin castors DK 7495.000,
see page 374,
see page 373.
Detailed drawings:
For
enclosure depth
mm
Packs of
Model No.
TS
400
2 8601.450
500
600
2 8601.680
800
Base/plinths
Base
Cast feet
For secure siting of
Enclosure for tower PC
or
Other own assemblies
Depth 700 mm
Material:
Cast aluminium
Colour:
RAL 7035
Supply includes:
Assembly parts.
Accessories:
Base mount CP 6147.000,
see page 151.
Twin castors,
see page 374.
Packs of Model No. IW
2 6902.920
Levelling feet
For direct mounting underneath the base/plinth TS
and the base/plinth, complete.
For unhindered access e.g. when cleaning the
floor, and to compensate for floor irregularities.
Load capacity:
Maximum permissible static load:
400 kg per levelling foot
Adjustment range:
M12: 55 mm 125 mm
M16: 45 mm 120 mm
Material:
Possible
alternative:
Levelling feet Hygienic Design,
see page 156.
Thread Packs of Model No. SO
M12 4 2889.000
M16 4 2890.000
Base/plinth
for FlatBox
The base/plinth may be mounted on any FlatBox
with a base area of 600 x 600 or 700 x 700 mm.
For attachment purposes, the base/plinth may be
mounted on the pre-existing thread in the base
area of the FlatBox. There is a rear recess pro-
vided for cable entry.
Material:
Sheet steel
Surface finish:
Powder-coated
Colour:
RAL 7035
Supply includes:
4 levelling feet and
assembly parts.
For base area
Width
mm
Depth
mm
600 600 1 7507.750
700 700 1 7507.755
Base
Base/plinths
Under-floor frame
for DK-TS
For siting the enclosure on a false floor when
heavy equipment is installed.
Material:
Sheet steel
Colour:
RAL 7035
Supply includes:
sure.
Width
mm
Height
mm
Depth
mm
Model No. DK
600 400 1000 7855.340
800 400 1000 7855.342
Stabiliser bracket
for base/plinth TS
The stabiliser bracket may be retrospectively
screw-fastened to the outside of the base/plinth
corner pieces.
Load capacity:
Up to a maximum of 80 kg static load.
Material:
Sheet steel
Surface finish:
Spray-finished
Colour:
RAL 7035, warning markings RAL 2002
Supply includes:
Assembly parts.
2 7825.150
Stabiliser
for TS 8 server enclosures
The pull-out stabiliser is quickly and easily retro-
fitted to the lower frame of the server racks and
only extended when necessary.
Load capacity:
Up to a maximum of 150 kg static load.
Material:
Sheet steel
Surface finish:
Zinc-plated
Supply includes:
Assembly parts.
Note:
The stabiliser cannot be used together with
base plates, base frames or base/plinths.
Combined use with the divided base frame
(DK 7825.342), see page 377, is supported.
Accessories:
Levelling feet, see page 373
and/or
Transport kit for DK-TS, see page 375.
Enclosure depth mm Model No. DK
1000 7825.250
1200 7825.260
1)

1)
150kg
Base
Base
Levelling feet
18 43 mm high
To compensate for height differences with floor
irregularities. Thread length 40 mm.
Assembly thread M12.
approx. 300 kg per levelling foot.
For:
Baying system TS 8
PC enclosure system
Pedestal base plate
CP 6137.035 CP 6137.535
Pedestal CP 6141.XXX
Industrial workstations
Also required:
For mounting on the TS base/plinth:
Base/plinth adaptor TS 8800.220,
see page 375.
Packs of Model No. PS
4 4612.000
5
8
4
0
1
8
M12
47
SW 19
Levelling feet
18 63 mm high, with hex socket for baying
system TS 8
To compensate for floor irregularities.
Particularly in confined spaces, adjustments can
be made quickly and easily from the enclosure
interior.
Mounting thread: M12
Hex socket: 6 mm
Thread length: 60 mm
300 kg per levelling foot.
Also required:
Base/plinth adaptor TS 8800.220,
see page 375.
4 7493.100
M12
SW 19
6
0
7
8
1
8
48
Levelling feet
with vibration dampening
For vibration insulation of enclosures and to
compensate for floor irregularities.
The levelling foot is comprised of a disc of re-
inforced polyamide and an M12 screw, zinc-
plated, with ball joint pendulum plus anti-slip
and insulating plate for buffering.
The insulating plate is resistant to water, mineral
oils, petrol, alkaline and acid solutions, salts,
soap lye and detergents.
Also suitable for special applications such as
chemical and laboratory environments.
Thread length: 50 mm
4 7493.230
3
0
4
5
5
0
9
5
M12
SW19
50
Levelling feet
for Data Rack
To compensate for height differences with floor
irregularities.
The levelling feet are attached into the die-cast
zinc feet of the base/plinth.
Supply includes:
4 levelling feet M12,
levelling range 40 mm.
4 7493.000
Base
Base
Levelling feet
for FlatBox, TE
M10 x 20 mm
For screw-fastening onto the enclosure base
when used as a floor-standing or desktop
enclosure.
Width across flats 17, mounting thread multi-
tooth 30.
4 7507.740
Levelling feet
85 115 mm high
For mounting on TS, ES and PC enclosures, for
easier floor cleaning and to compensate for floor
irregularities 15 mm.
Height 100 mm.
Material:
Feet: Brass, nickel-plated
Threaded bolts and mounting plates:
Supply includes:
Assembly parts to the enclosure.
Possible
alternative:
Levelling feet Hygienic Design,
see page 156.
4 2859.000
1
2
3
Twin castors
Mounting thread M12 x 20.
For:
Baying system TS 8
PC enclosure system
Pedestal base plate
CP 6137.035 CP 6137.535
Pedestal CP 6141.XXX
TopConsole pedestals
Industrial workstations
Data Rack
Also required:
Base/plinth adaptor for twin castors TS 8800.290,
see page 375.
Max. permissible
static load (per castor)
40 kg
Ground clearance 50 mm
Lock 4 without
Packs of 1 set
Colour Black
Model No. PS 4611.000
1
Max. permissible
75 kg
Lock 2 with, 2 without
Packs of 1 set
Colour
Black with grey
running surface
2
Max. permissible
120 kg
Lock 2 with, 2 without
Packs of 1 set
Colour Black
3
Base
Base
Transport castors
for TE
The castors may be screw-fastened in the corner
areas within the base frame in place of the level-
ling feet.
Ground clearance: 58 mm,
Mounting thread M10 x 20.
Permissible static load:
300 kg per enclosure
Supply includes:
1 set = 4 baying clamps,
including assembly parts.
Packs of Model No. TE
1 set 7000.672
Transport kit
for DK-TS
Ground clearance: approx. 40 mm.
750 kg per enclosure
Supply includes:
1 set =
4 castors (2 steerable) including assembly parts.
Note:
Only for enclosures without gland plates or gland
plate frames.
For 800 mm wide enclosures with 482.6 mm (19)
mounting frame, special installation dimensions
must be observed (see drawing).
1 set 7825.900
M
i
n
.

1
7
5
Base/plinth adaptor
for levelling feet
Connection component for fastening M12 level-
ling feet PS 4612.000 to the TS base/plinth.
Material:
Sheet steel
Surface finish:
Zinc-plated
Also required:
Levelling feet, PS 4612.000,
see page 373.
4 8800.220
Base/plinth adaptor
for twin castors
Connection component for mounting twin castors
to the TS and TE base/plinth.
Material:
Sheet steel
Surface finish:
Zinc-plated
Also required:
Base/plinth trim panels, side,
see page 362,
wherever a twin castor is fitted.
4 8800.290
Base
Base
Width divider
Divides 1200 mm wide TS enclosures into two
halves.
Material:
Sheet steel
Surface finish:
Zinc-plated
Supply includes:
1 set =
1 bracket for right/left,
2 compensating plates for the top,
mounting accessories.
Also required:
Depending on the installation situation:
TS punched rail 18 x 38 mm,
see page 462.
PS punched section without mounting flange,
23 x 73 mm,
see page 464.
1 set 8800.200
1. Mounting position:
Two mounting plates side by side.
Two mounting plates (from 600 mm wide
enclosures) in a 1200 mm wide enclosure permit
independent positioning and easy handling.
Also required:
In accordance with the enclosure depth:
4 TS punched rails 18 x 38 mm, bottom,
see page 462.
1 PS punched section without mounting flange
23 x 73 mm at the top, see page 464.
System support rails, fitted on the left.
Whilst heavy installed equipment rests on the
system support rails, the remaining floor space
is free, e.g. for unhindered cable entry.
Also required:
2 system support rails PS 4361.000,
see page 466.
1 TS punched rail 18 x 38 mm in accordance
with the enclosure depth (included with the
supply of the standard enclosure).
Cable clamp rail, installed on the left.
With 1200 mm wide enclosures, the width divider
allows cable entry and cable clamping to be
arranged differently on the left and right of the
enclosure.
Also required:
1 cable clamp rail PS 4191.000,
see page 527.
1 TS punched rail 18 x 38 mm in accordance
with the enclosure depth (included with the
supply of the standard enclosure).
Base mounting bracket
for TS, ES, TP universal console
For anchoring the enclosure at any position of the
base frame, particularly in cases where the exist-
ing holes in the frame or base tray cannot be used
due to the installed equipment or because the
substructure prevents them from being used.
Material:
Sheet steel
Surface finish:
Zinc-plated
Note:
Additional holes in the base are required for
mounting.
4 8800.210
Base
Base
Reinforcement bracket
for TS, ES, TP universal console
For use as an additional stabiliser to the clamping
straps when populated enclosures are screw-fas-
tened via the base tray to the base/plinth or pallet
for transportation purposes.
Material:
Sheet steel
Surface finish:
Zinc-plated
Supply includes:
Assembly parts.
4 8800.830
Base frame, divided
for TS 8 server enclosures
For retro-fitting gland plates or base modules.
Suitable for combining with the pull-out stabiliser.
Material:
Sheet steel
Surface finish:
Zinc-plated
Supply includes:
Packs of 1 set
Frame elements, assembly parts.
Accessories:
Multi-piece gland plate,
see page 381.
Stabiliser,
see page 372.
For enclosures
Model No. DK
Width
mm
Depth
mm
600 1000 7825.342
Clips
for gland plates
As replacement and for additional gland plate
attachments in TS, CM, TP.
Material:
Sheet steel
Surface finish:
Zinc-plated
50 8800.075
Base
Base
Gland plate
for CM, TopConsole TP
and one-piece console TP
Select suitable gland plates depending on the
application. The following examples illustrate the
individual options for cable entry structuring.
Potential equalisation is provided via assembly
components and earthing points.
Material:
Sheet steel
Surface finish:
Zinc-plated
IP 55 to IEC 60 529, subject to correct mounting.
Supply includes:
1 piece, including assembly parts.
Note:
For greater stability and universal cable entry,
the base opening is divided in the width for 1000,
1200 and 1600 mm wide enclosures, and is suit-
able for various configurations.
For enclosure depth 300 mm, complete module groups
For enclosure/console depth
mm
One-piece base opening Two-piece base opening
For enclosure width
Packs
of
Requires
packs
of
600 800
Packs
of
Requires
packs
of
1000 1200 1600
Cable entry
module groups
Model No. Model No.
Cable clamp strip, centre
Gland plate,
depth 50 mm
1 2 5001.210 5001.211 1 4 5001.212 5001.213 5001.233
Section for cable entry,
centre
1 set 1 8802.060 8802.080 2 sets 1 8802.100 8802.120 8802.160
Cable clamp strip, rear
Gland plate,
depth 100 mm
1 1 5001.214 5001.215 1 2 5001.216 5001.217 5001.234
rear
1 set 1 8802.065 8802.085 2 sets 1 8802.105 8802.125 8802.165
Grommets, 1 x
Gland plate,
depth 50 mm
1 1 5001.210 5001.211 1 2 5001.212 5001.213 5001.233
Cable entry plates
for grommets
1 1 5001.226 5001.227 1 1 5001.228 5001.229 5001.237
Cable entry and connector grommets, see page 512.
For cable glands
One-piece
Gland plate,
depth 150 mm
1 1 5001.218 5001.219 1 2 5001.220 5001.221 5001.235
Two-piece
Gland plate,
depth 50 mm
1 1 5001.210 5001.211 1 2 5001.212 5001.213 5001.233
Gland plate,
depth 100 mm
1 1 5001.214 5001.215 1 2 5001.216 5001.217 5001.234
Cable glands, see page 519.
Base
Base
mm
For enclosure width
Packs
of
Requires
packs
of
600 800
Packs
of
Requires
packs
of
1000 1200 1600
Cable entry
module groups
Model No. Model No.
Gland plate,
depth 50 mm
1 1 5001.210 5001.211 1 2 5001.212 5001.213 5001.233
Gland plate,
depth 150 mm
1 1 5001.218 5001.219 1 2 5001.220 5001.221 5001.235
centre
1 set 1 8802.060 8802.080 2 sets 1 8802.100 8802.120 8802.160
Gland plate,
depth 100 mm
1 2 5001.214 5001.215 1 4 5001.216 5001.217 5001.234
rear
1 set 1 8802.065 8802.085 2 sets 1 8802.105 8802.125 8802.165
Cable clamp strip, centre and rear
Gland plate,
depth 50 mm
1 1 5001.210 5001.211 1 2 5001.212 5001.213 5001.233
Gland plate,
depth 100 mm
1 1 5001.214 5001.215 1 2 5001.216 5001.217 5001.234
centre
1 set 1 8802.060 8802.080 2 sets 1 8802.100 8802.120 8802.160
rear
1 set 1 8802.065 8802.085 2 sets 1 8802.105 8802.125 8802.165
Grommets, 1 x
Gland plate,
depth 150 mm
1 1 5001.218 5001.219 1 2 5001.220 5001.221 5001.235
Cable entry plates
for grommets
1 1 5001.226 5001.227 1 2 5001.228 5001.229 5001.237
Grommets, 2 x
Gland plate,
depth 50 mm
1 1 5001.210 5001.211 1 2 5001.212 5001.213 5001.233
Cable entry plates
for grommets
1 2 5001.226 5001.227 1 4 5001.228 5001.229 5001.237
EMC
EMC gland plate 1 set 1 8800.660 8800.680 1 set 2 8800.600 8800.620
Gland plate,
depth 100 mm
1 1 5001.214 5001.215 1 2 5001.216 5001.217
For cable glands
One-piece
Gland plate,
depth 250 mm
1 1 5001.222 5001.223 1 2 5001.224 5001.225 5001.236
Two-piece
Gland plate,
depth 150 mm
1 1 5001.218 5001.219 1 2 5001.220 5001.221 5001.235
Gland plate,
depth 100 mm
1 1 5001.214 5001.215 1 2 5001.216 5001.217 5001.234
Base
Base
mm
For enclosure width
Packs
of
Requires
packs
of
600 800
Packs
of
Requires
packs
of
1000 1200 1600
Cable entry
module groups
Model No. Model No.
Gland plate,
depth 50 mm
1 1 5001.210 5001.211 1 2 5001.212 5001.213 5001.233
Gland plate,
depth 250 mm
1 1 5001.222 5001.223 1 2 5001.224 5001.225 5001.236
centre
1 set 1 8802.060 8802.080 2 sets 1 8802.100 8802.120 8802.160
Gland plate,
depth 150 mm
1 2 5001.218 5001.219 1 4 5001.220 5001.221 5001.235
rear
1 set 1 8802.065 8802.085 2 sets 1 8802.105 8802.125 8802.165
Cable clamp strip, centre and rear
Gland plate,
depth 50 mm
1 1 5001.210 5001.211 1 2 5001.212 5001.213 5001.233
Gland plate,
depth 100 mm
1 2 5001.214 5001.215 1 4 5001.216 5001.217 5001.234
centre
1 set 1 8802.060 8802.080 2 sets 1 8802.100 8802.120 8802.160
rear
1 set 1 8802.065 8802.085 2 sets 1 8802.105 8802.125 8802.165
Grommets, 1 x
Gland plate,
depth 250 mm
1 1 5001.222 5001.223 1 2 5001.224 5001.225 5001.236
Cable entry plates
for grommets
1 1 5001.226 5001.227 1 2 5001.228 5001.229 5001.237
Grommets, 2 x
Gland plate,
depth 150 mm
1 1 5001.218 5001.219 1 2 5001.220 5001.221 5001.235
Cable entry plates
for grommets
1 2 5001.226 5001.227 1 4 5001.228 5001.229 5001.237
EMC
EMC gland plate 1 set 1 8800.660 8800.680 1 set 2 8800.600 8800.620
Gland plate,
depth 100 mm
1 2 5001.214 5001.215 1 4 5001.216 5001.217
For cable glands, two-piece
Gland plate,
depth 100 mm
1 1 5001.214 5001.215 1 2 5001.216 5001.217 5001.234
Gland plate,
depth 250 mm
1 1 5001.222 5001.223 1 2 5001.224 5001.225 5001.236
Base
Base
Trim panel
for CM
To conceal the entire base opening.
Material:
Sheet steel
Surface finish:
Textured paint
Colour:
RAL 7035
IP 55 to IEC 60 529
Supply includes:
Assembly parts.
For enclosure
Model No. CM
Width mm Depth mm
600 400 5001.130
800 400 5001.140
1000 400 5001.150
1200 400 5001.160
Gland plate, multi-piece
for DK-TS
Any combination possible
Material:
Sheet steel
Surface finish:
Zinc-plated
Supply includes:
Packs of 1 set
Gland plates including sliding plate for cable
entry, including sealing tape and assembly parts.
Note:
For the size variant 800 x 800 mm, the gland plate
included with the supply of pre-configured net-
work enclosures should be additionally used.
Also required:
For integration of the gland plates, there must be
a base frame inside the enclosure.
Base frame, divided, for retro-fitting,
see page 377.
Accessories:
All gland plates with a depth of 237.5 mm may be
exchanged for gland plate modules on request.
Gland plate modules,
see page 382.
Gland plate modules,
vented with airflow regulator,
see page 382.
Base module for cable entry,
see page 383.
see page 512, 513.
For enclosures
Model No. TS
Width
mm
Depth
mm
600 1000 7825.364
600 1200 7825.365
800 800 7825.382
800 1000 7825.384
800 1200 7825.385
One-piece gland plate
vented, for TS
With ventilation holes
Cut-out for cable entry at the rear, covered with
brush strip.
Material:
Sheet steel
Surface finish:
Zinc-plated
Supply includes:
Assembly parts.
Accessories:
Filter mat for gland plate,
see page 382.
For enclosures
Model No. DK
Width mm Depth mm
600 600 7825.660
600 800 7825.680
600 1000 7825.610
800 600 7825.860
800 800 7825.880
800 1000 7825.810
600 1200 7825.612
800 1200 7825.812
Base
Base
Filter mat
for one-piece gland plate
The filter mat may be cut to size according to the
required cut-out.
Material:
PPI 35-5/polyamide
1 7825.620
Gland plate modules
for DK-TS
For use in the base frame of the network enclo-
sure. Used in exchange for an existing gland
plate of the same depth or in conjunction with a
multi-piece gland plate for pre-configured TS 8
enclosures, see page 381.
Gland plate depth:
237.5 mm
Version for cable entry at the rear:
With brush strip.
Version for cable entry at the sides:
With rubber cable clamp strip.
Vented design:
With filter mat for concealing the holes and nylon
tape for securing from the inside or outside.
Material:
Sheet steel
Surface finish:
Zinc-plated
For
enclosure width
mm
Design Model No. DK
600
For cable entry,
rear
7825.361
800 7825.381
800
For cable entry,
sides
7825.388
600
Vented
7825.360
800 7825.380
Spare filter mat
for gland plate modules, vented
To be used in exchange for the existing filter mat.
Material:
PPI 35-5/polyamide
Supply includes:
Assembly parts.
2 7825.350
Gland plate modules, vented
with airflow regulator
for DK-TS
Allows controlled air routing from the twin base to
the installed components. Individually adjustable
membranes allow control of the air inlet opening
between 10% and 80% free space.
If the rear area of the enclosure is partitioned by
base/gland plates, the required volumetric airflow
may be individually regulated, and distribution of
the airflow inside the twin base adapted to suit the
requirements of each enclosure.
The gland plate module may be combined with all
gland plates as required. Gland plate module
including contacting assembly screws; the addi-
tional installation of PE conductors is not required.
Material:
Sheet steel
Supply includes:
Packs of 1
Gland plate module, vented
Filter mat
Assembly parts
Also required:
For integration of the gland plates, there must be
a base frame inside the enclosure.
Base frame, divided, for retro-fitting,
see page 377.
Accessories:
Spare filter mat,
see page 383.
For enclosure width mm Model No. DK
600 7825.366
800 7825.386
Base
Base
Spare filter mat
for gland plate modules, vented,
with airflow regulator
To be used in exchange for the existing filter mat.
Material:
PPI 35-5/polyamide
Supply includes:
Assembly parts.
1 7825.622
Base module
for cable entry
Super-airtight
for DK-TS
The two-part base module has a special cable
entry with alternate offset brush strips which
guarantee an excellent seal even with large cable
quantities.
Material:
Module plate: Sheet steel
Brush strip: Plastic, UL 94-V0
Surface finish:
Module plate: Zinc-plated
Supply includes:
Brush strip and assembly parts.
For enclosure width
mm
600 1 7825.367
800 1 7825.387
T
B
B
1
T
1
Module plates
for TE
The base area of the TE may be varied as
required using the module plates.
Material:
Sheet steel
Supply includes:
Assembly parts.
Design
Width
mm
Depth
mm
Model No. TE
Solid
450 200 7526.760
450 550 7526.770
450 750 7526.780
650 550 7526.785
1)

650 200 7526.800
650 750 7526.820
1)

With brush strip
450 200 7526.850
650 200 7526.860
Vented
450 200 7526.829
650 200 7526.834
Compensating
panel
450 50 7526.750
450 150 7526.755
650 50 7526.790
650 150 7526.795
1)
Enclosure dimensions
mm
W (B) 600 600 600 800 800 800
D (T) 600 800 1000 600 800 1000
Base cut-out dimensions
mm
W (B1) 450 450 450 650 650 650
D (T1) 550 750 950 550 750 950
Base
Base
Pressure relief stopper
Especially when enclosures are exposed to
changing climatic conditions (e.g. with outdoor
siting), condensation may form in sealed enclo-
sures due to pressure differences. The integral
sealing membrane largely prevents such pres-
sure differences and hence condensation; addi-
tionally, it also prevents the ingress of moisture
from the outside.
Installed in vertical surfaces to protect against
dirt.
Air permeability up to 120 litres/hour with a
pressure difference of 70 mbar
Connection thread M12 x 1.5
For fitting in wall thicknesses up to 4 mm
Material:
Polyamide
Colour:
Similar to RAL 9005
IP 66, 68 to EN 60 529
IP 69K to DIN 40 050-9
Supply includes:
Lock nut
5 2459.500
Condensate discharge
For reliable discharge from the inside and protec-
tion against splashes from the outside (labyrinth
effect).
A hole diameter of 16 mm is required.
(With AE sheet steel, the holes are already pro-
vided in the base.)
Material:
Polyamide
Colour:
Similar to RAL 7035
IP 55 to IEC 60 529,
subject to correct mounting at the bottom.
6 2459.000
Gland plates
for CS New Basic enclosures
For sealing the base opening and for cable entry.
Material:
Sheet steel
Surface finish:
Powder-coated, zinc-plated
Colour:
RAL 7035
Supply includes:
Assembly parts.
For enclosure dimensions
Packs of Model No. CS
Width
mm
Depth
mm
600 400 1 set 9785.511
600 500 1 set 9785.514
800 400 1 set 9785.512
800 500 1 set 9785.513
1200 400 1 set
2 x
9785.511
1200 500 1 set
2 x
9785.514
Side panels
Walls
1
Side panels, screw-fastened,
sheet steel
for TS
Automatic potential equalisation and higher
EMC protection thanks to enclosure panel
fasteners with earthing insert
Easy positioning with the location aid
Earthing bolt with contact surface
Material:
Sheet steel 1.5 mm, textured
Surface finish:
Dipcoat-primed, powder-coated on the outside
Colour:
RAL 7035
IP 55 to IEC 60 529
Supply includes:
Assembly parts.
Note:
Enclosure panel holders may optionally be fitted
from the inside or outside of the enclosure.
Area available for population:
External dimension 100 mm.
Automatic potential equalisation
Accessories:
Earth straps,
see page 501.
Enclosure panel fasteners, internal,
see page 386, for heavy installed equipment
and high dynamic pressures.
1
For enclosures
Packs
of
Model No. TS
Height mm Depth mm
800 600 2 8173.235
1000 600 2 8174.235
1200 500 2 8115.235
1200 600 2 8170.235
1200 800 2 8175.235
1200 1000 2 8176.235
1400 500 2 8145.235
1400 600 2 8146.235
1400 800 2 8148.235
1600 500 2 8165.235
1600 600 2 8166.235
1600 800 2 8168.235
1800 400 2 8184.235
1800 500 2 8185.235
1800 600 2 8186.235
1800 800 2 8188.235
1800 1000 2 8180.235
2000 400 2 8104.235
2000 500 2 8105.235
2000 600 2 8106.235
2000 800 2 8108.235
2000 1000 2 8100.235
2200 600 2 8126.235
2200 800 2 8128.235
Side panels, screw-fastened,
stainless steel
for TS
Automatic potential equalisation and higher
EMC protection thanks to enclosure panel
fasteners
Easy positioning with the location aid
Earthing bolt with contact surface
Material:
Stainless steel 1.4301 (AISI 304), 1.5 mm
Surface finish:
Brushed, grain 400
IP 55 to IEC 60 529
Supply includes:
Assembly parts.
Accessories:
Enclosure panel fasteners, internal, see page 386,
for heavy installed equipment and high dynamic
pressures.
Detailed drawings:
For enclosures
Packs
of
Model No. TS
Height
mm
Depth
mm
1800 400 2 8700.840
1800 500 2 8700.850
2000 600 2 8700.060
Walls
Side panels
Side panels, asymmetrical
for TS
The alternative to the standard side panel for
improved visual appearance in the event of back-
to-back, back-to-side or corner baying. The gap
(A) which occurs with standard side panels is
reduced to a standard dimension (B), see techni-
cal drawing. In the case of the TS 8 corner enclo-
sure, an asymmetrical side panel is included in
the supply.
The number of additional asymmetrical side pan-
els required depends on the chosen baying vari-
ant.
Material:
Sheet steel, 1.5 mm
Colour:
RAL 7035
IP 55 to IEC 60 529
Supply includes:
Assembly parts.
Accessories:
Enclosure panel fasteners, internal, see page 386,
for heavy installed equipment and high dynamic
pressures.
For enclosures
Packs
of
Model No. TS
Height mm Depth mm
1800 400 2 8184.500
1800 500 2 8185.500
1800 600 2 8186.500
2000 400 2 8104.500
2000 500 2 8105.500
2000 600 2 8106.500
2000 800 2 8108.500
2200 600 2 8126.500
Asymmetrical
side panel
Side panel Corner baying Back-to-back baying
B
A
Rear panel Door Standard side panel Asymmetrical side panel
Enclosure panel fasteners,
internal
for TS
for additional fixing of the side or rear panel with
heavy installed equipment and high dynamic
pressures.
10 8800.071
Side panels
Walls
Hinges
for
TS side panel, screw-fastened, sheet steel
TS side panel, asymmetrical
The 180 opening angle allows unhindered
access. May be installed optionally from the
inside or outside of the enclosure: Simply replace
3 enclosure panel fasteners with hinges. Despite
the hinge, the protection category of the enclo-
sure is retained.
Material:
Die-cast zinc
Supply includes:
Assembly screws.
Note:
Side panel and door hinges may only be
installed on the same enclosure section when
using a 180 door hinge (see page 425).
Please note: Red areas (side panels), hinged
and unhinged, must always be opposite one
another. Blue areas (doors/rear panels) must
always be opposite one another. Only one
surface on each vertical enclosure section
may be hinged.
Design Packs of Model No. TS
RAL 7035 6 8800.110
Side panel, lockable
for TS
Simply locate from above
Lock via security lock no. 3524 E
Earthing bolt with contact lug.
Material:
Sheet steel, powder-coated
IP 20/NEMA 1 to IEC 60 529
Supply includes:
2 side panels each with 4 security locks
no. 3524 E.
Note:
Side panels 1200 mm deep as divided variants,
see page 388.
Accessories:
Internal latch DK 7824.510,
see page 388.
For enclosures Colour RAL
Model No.
DK
Height mm Depth mm 7035 9005
800 600 7824.086
1000 600 7824.106
1200 600 7824.126
1200 800 7824.128
1200 1000 7824.120
1200 1000 7816.120
1400 600 7824.146
1)

1400 800 7824.148
1600 600 7824.166
1600 800 7824.168
1800 600 7824.186
1800 800 7824.188
1800 1000 7824.180
1)

2000 600 7824.206
2000 800 7824.208
2000 1000 7824.200
2000 1000 7816.200
1)

2200 600 7824.226
2200 800 7824.228
2200 1000 7824.220
1)
Walls
Side panels
Internal latch
for side panel, lockable
Additional security is achieved via the option of
latching the side panel from the inside.
The side panels on the frame section are screw-
fastened from the inside with latching brackets.
Supply includes:
Assembly parts.
For enclosure system Packs of Model No. DK
TS 4 7824.510
Side panel, plug-type, divided
for DK-TS
The horizontally divided side panel offers clear
advantages for storage, transportation and
assembly, thanks to the reduced weight and
smaller dimensions of its individual parts. The
lower side panel part is inserted into the base
frame and secured in the centre of the enclosure
via a punched section with mounting flange. After
attaching, the complete side panel is locked at
the top with 2 locks.
Material:
Sheet steel
Colour:
RAL 7035
Supply includes:
Side panel with security lock 3524 E
Punched sections with mounting flanges
Earth conductor
Assembly parts
For enclosures
Height
mm
Depth
mm
2000 1200 1 7824.310
2200 1200 1 7824.312
Side panels
for TE
Simple assembly with insertion aid at the
bottom and lock at the top
Earthing bolt with contact lug
Material:
Sheet steel
Surface finish:
Powder-coated
IP 20
Supply includes:
Security lock 3524 E.
For enclosures
Packs of
Colour RAL
Model No. TE
Height mm Depth mm 7035 9005
2000 800 2 7000.652
2000 1000 2 7000.653
2000 1000 2 7000.663
Primer/paint
For touching up and repairing powder-coated and
wet-painted surfaces, air-drying.
Colour RAL Model No. SZ
Touch-up pen 12 ml
7032 2436.732
7035 2436.735
Tin 1000 ml 7035 2438.735
Spray can 150 ml
7022 2581.000
7032 2437.000
7035 2440.735
Divider panels/partitions
Walls
Cable management panel
for DK-TS
The universal routing aid for network enclosures
where large quantities of cables and lines are
managed. Can also be used as a partition with
cable management option.
By attaching to the inner level, cables may be
routed inside and out, also in conjunction with
a side panel.
Mounting options:
Directly onto the inner mounting level of TS 8
enclosures
On the outer mounting level on punched
sections with mounting flanges.
Material:
Sheet steel
Surface finish:
Powder-coated
Colour:
RAL 7035
Supply includes:
Assembly parts.
Accessories:
Nylon loop fasteners,
see page 530.
Cable route,
see page 536.
Cable ties,
see page 530.
Cable shunting rings,
see page 534.
Cable manager,
see page 533.
For enclosures
Model No. DK
Width/depth
mm
Height
mm
600 2000 7824.560
800 2000 7824.580
1)

1)
Divider panel
for TS
For shielding individual enclosure cells. Thanks to
the symmetry of the frame system, the divider
panel can also be used at the rear. All-round,
double fold for stability and to hold the seal.
Notches in the corners and half-way up the sides
permit the use of angular baying brackets and
baying brackets, even with a divider panel fitted.
For mounting on the outer mounting level. This
leaves the inner level free for further population.
Material:
Sheet steel, 1.5 mm, zinc-plated
IP 54 to IEC 60 529, subject to the correct use of
module plates.
Supply includes:
Assembly parts.
Note:
The divider panel may also be fitted to the rear.
This allows, e.g. frequency converters for heat
dissipation to be installed in a divider panel with
the cooling units facing outwards and protected/
finished off with a cover (see page 392).
Accessories:
Cover with door,
see page 392.
Baying attachment, vertical (TS 8800.470)
for enclosures with fitted divider panel,
see page 398.
For enclosures
Model No. TS
Height mm Depth mm
1800 400 8609.840
1800 500 8609.850
1800 600 8609.860
2000 400 8609.040
2000 500 8609.050
2000 600 8609.060
2000 800 8609.080
2200 600 8609.260
1
7
0
2
/
1
9
0
2
/
2
1
0
2
302/402/502/702
289/389/489/689
247/347/447/647
Walls
Partition
for DK-TS
For rack mounting, suspended between two TS 8
enclosures.
With three 40 mm holes in all 4 corner areas for
the insertion of cable sections, conduits etc.
Drilled holes may be sealed with the enclosed
stepped collars. For cable entry, simply cut off at
a suitable level to match the required cross-sec-
tion.
Material:
Partition: Sheet steel
Stepped collar: Plastic to UL 94-HB
Surface finish:
Partition: Zinc-plated
Supply includes:
12 stepped collars 40 mm.
Note:
Use baying connector TS 8800.490.
Not for use in conjunction with a baying seal.
Any existing seals must be removed prior to
installation.
Accessories:
Baying clamp TS 8800.490,
see page 396.
For enclosures
Model No. DK
Height mm Depth mm
2000 1000 7831.723
2000 1200 7831.724
2200 1200 7831.726
The divider panel and
module plate system
More options:
The cut-outs of a divider panel are individually
equipped with module plates for 16-pole or 24-
pole connectors, with module plates for cable
entry and with solid module plates.
Faster assembly:
Usually only some of the total number of connec-
tor cut-outs are used. Thanks to the new divider
panel technique, the cut-outs do not need to be
covered individually. The solid module plate is
used instead.
The benefits: Less plates, less screws,
less assembly work.
402/502
318
1
4
4
1
8
8
1
7
0
2
/
1
9
0
2
8

x

1
8
8

(
1
5
0
4
)
/
9

x

1
8
8

(
1
6
9
2
)
9
9
/
1
0
5
Divider panel
for module panels TS
With cut-outs for the installation of module plates
for connectors or for cable entry, and also for
the entry of busbar systems and other installed
equipment. All-round, double fold for stability
and to hold the seal. Thanks to the symmetry of
the enclosure frame, divider panels may also be
fitted at the rear, dimensions permitting.
For mounting on the outer mounting level. This
leaves the inner level free for further population.
Material:
Sheet steel, 2 mm
Surface finish:
Zinc-plated
Supply includes:
Assembly parts and multi-tooth screws
M5 x 12 mm for mounting the module plates.
Note:
Notches in the corners and half-way up the sides
permit the use of angular baying brackets and
baying brackets, even with a divider panel fitted.
Accessories:
Module plates,
see page 391.
Cover with door,
see page 392.
Baying attachment (TS 8800.470)
for enclosures with fitted divider panel,
see page 398.
For enclosures
Number of cut-outs Model No. TS
Height mm Depth mm
1800 500 9 8609.100
1800 600 9 8609.110
2000 500 10 8609.120
2000 600 10 8609.130
Walls
Module plates
Material:
Sheet steel, 2 mm
Surface finish:
Zinc-plated
Supply includes:
Seal
Design Cut-outs Packs of Model No. TS
Solid 1 8609.160
For 16-pole
connectors
4 1 8609.150
For 24-pole
connectors
4 1 8609.140
For cable entry 1 1 8609.170
For cable entry
grommets
4 1 8609.190
With cable sleeve 1 1 8609.390
Solid
For sealing unused cut-outs. Easily machined for
individual cut-outs.
Detailed drawings:
for 16/24-pole connectors
With cut-outs to accommodate connectors. In
addition to mounting on divider panels, module
plates may also be attached to the 25 mm pitch
pattern of the enclosure and to the rails of the TS/
PS system.
Accessories:
Adaptor, cover plate,
see page 392.
Connector gland for connector cut-outs,
see page 522.
Connector gland sealing frame and sealing
module, see page 523.
For cable entry
For the entry of pre-assembled cables. Sealed,
secure routing is achieved via adjustable angle
brackets with inserted foam cable clamp strip.
Attachment bracket, punched, for cable clamp-
ing.
Accessories:
Cable tie for fast assembly SZ 2597.000,
see page 530.
For cable entry grommets
For mounting on the divider panel for module
plates TS. Slide the grommets into the cut-outs,
slide the clamp plate with seal down over them,
and screw-fasten.
Also required:
Cable entry grommets,
see page 512 or
Connector grommets,
see page 512.
With cable sleeve
For 10 65 mm cable diameters. The flexible
grommet adapts to the cable's bending radius.
Walls
Adaptors
for connector cut-outs
For using connectors with varying numbers of
poles.
Material:
Sheet steel
Surface finish:
Zinc-plated
Supply includes:
Seal for adaptor and mounting accessories.
For reduction Packs of Model No. SZ
From 24 to 16 poles 5 2479.000
From 24 to 10 poles 5 2480.000
From 24 to 6 poles 5 2481.000
From 16 to 10 poles 5 2401.000
From 16 to 6 poles 5 2402.000
Cover plate
for connector cut-outs
For unused cut-outs.
Material:
Sheet steel
Surface finish:
Zinc-plated
Supply includes:
For Packs of Model No. SZ
24-pole cut-outs 20 2477.000
16-pole cut-outs 20 2478.000
Cover with door
for TS
To protect and finish off connectors or other
installed equipment.
Optional cable entry from above or below.
Material:
Cover: Sheet steel, 1.5 mm
Door: Sheet steel, 2.0 mm
Colour:
RAL 7035
Supply includes:
Cover
Door with locking rod and double-bit lock insert
1 cover plate for top or bottom.
Accessories:
Lock inserts, version F,
see page 421.
Comfort handle,
see page 415.
180 hinge,
see page 425.
For enclosures
Model No. TS
Height
mm
Depth
mm
2000 500 8609.020
2000 600 8609.030
Noise protection kit
for TS
Noise insulating mats for equipping or retro-fitting
enclosures.
Thanks to their self-adhesive rear, the noise insu-
lating mats are easily attached to existing sur-
faces. Sound is absorbed, leading to significant
noise reduction. The kit is designed to reduce
noise from the roof, sides and rear of an enclo-
sure with dimensions WHD 800 x 2000 x 800 mm.
Other dimensions can be accommodated by
cutting to size individually.
Material:
Soft foam based on melamine resin, 20 mm
Colour:
Pale grey
Supply includes:
Spacer bolts for sound insulation of the roof plate.
Material category:
B1 to DIN 4102
Asorption level : share of absorbed output,
1 = 100% (averaged).
Averaged noise reduction (comparison source,
50 Hz 20 kHz): 1 m standard distance (averaged)
For enclosures
W x H x D mm
800 x 2000 x 800 1 set 7824.650
0.00
0.10
0.20
0.30
0.40
0.50
0.60
0.70
0.80
0.90
1.00
63 100 160 250 400 630 1000 1600 2500 4000 6300 10000
Hz
Absorption level
Isolator door locking
Walls
TS isolator door cover
(US version)
Including main door lock for safety locking of
enclosures and bayed enclosure suites in accord-
ance with US regulations, only in conjunction with
actuator lever for master switches:
Allen Bradley 1494 F-M1/P1/S1
and 140 U-K-FCX04
Square D 9422 A1
ITE Siemens Max-Flex series/FHOH
(only available in the USA)
General Electric TDA Type 1 and 2
Moeller NZM-XSHGVR 12-NA
Benefits:
In combination with
Operating mechanism
Adjacent door latch
Interconnecting rods
meets the requirements of UL 508 A
Compact design with a width of just 100 mm.
May be mounted instead of a side panel.
With this cover, all standard single-door TS 8
enclosures may be configured as isolator door
enclosures. The complete installation surface of
the enclosure is retained.
May be mounted optionally on the left or right of
the enclosure.
In conjunction with the integrable TS 8 mount-
ing plate infill, (see page 443), the mounting
surface of the main enclosure can be enlarged
by around 14%.
Material:
Sheet steel
Surface finish:
Powder-coated
Colour:
RAL 7035
IP 55 to IEC 60 529, complies with NEMA 12.
Supply includes:
Main door lock, cover plate and assembly parts.

Also required:
Operating mechanism, TS 4912.000, for enclo-
sure with isolator door cover and additionally
every fourth adjacent enclosure,
see page 393.
Adjacent door latch, TS 4911.000, TS 4911.100,
for every adjacent enclosure,
see page 393.
Interconnecting rods, for every adjacent
enclosure in the appropriate enclosure width,
see page 393.
Accessories:
Mounting plate infill,
see page 443.
Isolator door locking (US version)
Operating mechanism
Adjacent door locking (single-door)
Interconnecting rod
Connection component
Main door latch
Adjacent door locking (two-door)
Width
mm
Height
mm
Depth
mm
Model No.
TS
100 1800 400 8900.840
100 1800 500 8900.850
100 2000 500 8900.050
100 2000 600 8900.060
1
2
3
4
5
6
3 4 3 4 3
2 6 6 2 1 5
2 1
3
Door latch
for bayed enclosure suites
For extending the door locking of commercially
available master switches to bayed suites TS.
Adjacent door cannot be opened until the main
door has been opened.
Operating mechanism
(Fitted in the enclosure with master switch and
additionally in every fourth adjacent enclosure)
1
Operating mechanism 1 4912.000
Adjacent door latch
(Installation in adjacent enclosure)
2
Adjacent door locking for Packs of Model No. TS
single-door enclosures 1 4911.000
two-door enclosures 1 4911.100
Interconnecting rods
To extend locking from the main enclosure to
the adjacent enclosures of a bayed suite.
An interconnecting rod corresponding to the
width of the enclosure is required for each
adjacent enclosure.
3
For enclosure width
mm
600 10 4916.000
800 10 4918.000
1200 10 4920.000
Baying system
Enclosure suites
1
1
3
4
5
6
2
Bayable on all sides
Whether around corners, forwards, backwards,
to the left or right or even upwards if required,
the baying options are unlimited.
Quick-fit baying clamps,
one-piece
Quick-fit baying clamps,
three-piece
Baying clamp, horizontal
Baying clamp, vertical
for TS/TS
for TS/PS
Baying connector, external
Notes on the transportation
of bayed enclosures,
see page 396.
1
2
3
4
5
6
For baying at the installation site
or for provisional siting in the workshop
Enclosure suites
Baying system
Quick-fit baying clamp,
one-piece
for TS/TS
Simply attach the screws, insert the quick-fit
baying clamp, tap in with a hammer and lock.
Material:
Sheet steel
Surface finish:
Zinc-plated
Supply includes:
Assembly parts.
1 Packs of Model No. TS
6 8800.500
Quick-fit baying clamp,
three-piece
for TS/TS
Simply locate, connect with the lock plate,
and secure.
Material:
Sheet steel
Surface finish:
Zinc-plated
Supply includes:
Assembly parts.
6 8800.590
for TS/TS, TS/PS
For mounting on the horizontal enclosure sections.
Material:
Cast steel
Surface finish:
Zinc-plated
Supply includes:
Assembly parts.
4 8800.400
for TS/TS
For mounting on the vertical enclosure sections.
Material:
Sheet steel
Surface finish:
Zinc-plated
Supply includes:
Assembly parts.
6 8800.410
Baying system
Enclosure suites
for TS/PS
Material:
Cast steel
Surface finish:
Zinc-plated
Supply includes:
Assembly parts.
6 8800.420
Baying connectors, external
for TS/TS
Simply position on the outside and screw-fasten
either from the inside or outside.
Supply includes:
Assembly parts.
6 Material/surface finish Packs of Model No. TS
Sheet steel, zinc-plated 6 8800.490
(AISI 304)
6 8700.000
Individual enclosures may be safely transported
using the eyebolts included with the supply.
For symmetrical loads, the following maximum
permissible loads apply:
for 45 cable pull angle 4,800 N,
for 60 cable pull angle 6,400 N,
for 90 cable pull angle 13,600 N.
Note:
The eyebolts must be aligned in the direction of
the cable pull.
For larger baying combinations, we recommend
the use of a transport base/plinth, see page 368.
For the enclosure combi-
nation with angular bay-
ing brackets, quick-fit
baying clamps and com-
bination angles shown
here, the load capacity
with a cable pull angle of
60 is as follows:
for the left-hand enclo-
sure 7,000 N,
for the central enclosure
14,000 N,
for the right-hand enclo-
sure 7,000 N.
The cable pull angle
between the roof
plate and the cable
has a significant influ-
ence on the total per-
missible load.
The cable pull angle
must not be less than
45, and where possi-
ble, should be less
than 60.
Note on the transport of bayed enclosures
Enclosure suites
Baying system
7
8
1
B
7
1
A
7
8
8
When transporting bayed
enclosures
Baying bracket for TS/TS
Baying bracket for TS/TS
and TS/PS
Note:
In addition, the outer baying connector
(see page 396), can be used.
When transporting large, heavy enclosure com-
binations by crane, we additionally recommend
the use of combination angles TS 4540.000,
see page 398.
Also required:
For protection category IP 55:
One connector/clamp is required half-way up the
enclosure height, see page 395.
Baying clamp, see page 395/396.
Notes on the transportation of bayed enclosures,
see page 396.
2 quick-fit baying clamps
TS 8800.500
(see page 395).
4 baying brackets
TS 8800.430
(see page 397).
2 quick-fit baying clamps
TS 8800.500
(see page 395).
2 baying brackets
TS 8800.430
(see page 397).
4 baying brackets
TS 4582.500
(see page 398) if the angular baying brackets
cannot be fitted in the foremost installation
position due to installed equipment such as
large swing frames.
7
8
A
1
7
B
1
7
8
Angular baying brackets
for TS/TS
For a stable connection when transporting bayed
enclosure suites.
Screw-fastening either
Horizontally and vertically with 8 screws
Horizontally with 2 screws and M8 threaded
blocks, vertically with 4 screws
connection.
Material:
Sheet steel
Surface finish:
Zinc-plated
Supply includes:
Assembly parts.
4 8800.430
Baying system
Enclosure suites
Baying brackets
for TS/TS and TS/PS
For additional stabilistation, or in cases where:
Mounting plate brackets
Swing frame
Busbar support
prevent the installation of angular baying
brackets.
Material:
Sheet steel
Surface finish:
Zinc-plated
Supply includes:
Assembly parts.
Accessories:
For mounting on the vertical TS enclosure section:
Snap-on nut M8, TS 8800.808,
see page 471.
4 4582.500
Angular baying bracket
The alternative to baying bracket TS 4582.500
and for individual interior installations.
Material:
Sheet steel
Surface finish:
Zinc-plated
Supply includes:
Screws M8 x 16 mm.
Also required:
For mounting on:
Horizontal TS enclosure section,
captive nuts/threaded blocks M8,
see page 477,
Vertical TS enclosure section,
snap-on nut M8, TS 8800.808,
see page 471.
4 4582.000
Combination angle
For optimum distribution of tensile forces during
transportation of bayed enclosures by crane.
Material:
Sheet steel
Surface finish:
Zinc-plated
Supply includes:
Assembly parts.
Accessories:
Top baying cover,
see page 399.
Notes on the transportation of bayed enclosures,
see page 396.
4 4540.000
Baying attachment, vertical
for TS/TS with divider panel
Only suitable for mounting in conjunction with the
angle brackets of the divider panel (included with
the supply).
Material:
Sheet steel
Surface finish:
Zinc-plated
Supply includes:
Assembly parts.
Note:
May also be used for side or rear wall attachment/
fastening of enclosures. In such cases, additional
holes must be drilled in the side or rear panel.
8 8800.470
Enclosure suites
Baying system
Baying attachment, vertical
for TS/TS
For baying two populated enclosures on the verti-
cal enclosure section.
Simply locate into the vertical TS punchings,
secure and connect both brackets by using the
hex screws (supplied loose).
Using the fastening bolts, the enclosure is pulled
into a defined end position, with a height or side
offset of up to 2 mm.
Material:
Sheet steel, 3 mm
Surface finish:
Zinc-plated
Supply includes:
Assembly parts.
6 8800.670
for back-to-back mounting
Two-piece, for in situ assembly of enclosures
with mounting plate in the rearmost installation
position.
Material:
Sheet steel
Surface finish:
Zinc-plated
Supply includes:
Assembly parts.
4 8800.170
Baying cover, top
A cover with two end caps may additionally be
clipped over the seal between the two enclo-
sures. This prevents dirt and liquid from collect-
ing on the baying seal.
Material:
Cover section: Sheet steel or stainless steel
End caps: Plastic
Surface finish:
Spray-finished
Supply includes:
Cover section
2 end caps
Note:
May also be fitted in the width with enclosure
suites bayed back-to-back.
May also be used in conjunction with dust guard
trim, see page 432.
For
enclosure
depth
mm
Packs
of
RAL
7035
Stainless
steel
1.4301
(AISI 304)
Model No.
TS
400 1 8800.840
500 1 8800.850
600 1 8800.860
800 1 8800.880
1000 1 8800.892
400 1 8700.140
500 1 8700.150
600 1 8700.160
Baying system
Enclosure suites
Baying connector, external
for DK-TS/DK-TS with side panels
For retrospective baying of enclosures with screw-
fastened or lockable side panels.
Material:
Sheet steel
Colour:
RAL 7035
Supply includes:
Assembly parts.
4 7824.540
Compensating panel
for TS
The panel is screw-fastened to the outside of the
enclosure frame and serves as an infill panel
when baying 2000 mm high enclosures of varying
depths.
No seal between the enclosures.
Material:
Sheet steel
Colour:
RAL 7035
Supply includes:
Assembly parts.
Depth difference
mm
Model No. DK
100 7067.100
1)

200 7067.200
1)
Baying kit
for TE/TE
For connecting individual enclosures into bayed
suites at the sides. The enclosures are connected
between the base and roof frame.
Material:
Sheet steel
Surface finish:
Zinc-plated
Supply includes:
Assembly parts.
4 7000.640
Baying kit
for KL, AE
Special screws and nuts
For fast, simple assembly without thread-tap-
ping.
Compression of the seal is limited to a prede-
fined level, to ensure a long-lasting, permanent
seal between enclosures.
Seal, self-adhesive
Comprised of bayable sealing elements and
corner pieces, for individual adaptation to vari-
ous enclosure sizes.
One pack is sufficient for a baying point up to
H x D = 800 x 350 mm.
Supply includes:
Sealing elements
Assembly parts
1 set 1199.100
TS 8 corner enclosures
Baying system
The corner enclosure and the supplied compo-
nents will accommodate the various baying
options of the TS 8 frame on all outer surfaces.
Fitted with a rear panel and an asymmetrical side
panel (see page 386, mounted on the l/h side),
the corner enclosure also permits the option of
baying in both the width and depth.
The gland plates are aligned parallel to the rear
panel. In TS 8 enclosures with a square footprint,
the gland plates may also be rotated through 90.
The baying system is identical to all other TS 8
enclosures.
Material:
Sheet steel, 1.5 mm
Surface finish:
Enclosure frame, roof, rear panel, side panel:
Dipcoat-primed, powder-coated on the outside,
textured paint
Gland plates: Zinc-plated
Colour:
RAL 7035
Supply includes:
Enclosure frame
Roof
Rear wall (on the longest side)
Side panel, asymmetrical
Gland plates (divided in a longitudinal
direction)
Accessories:
TS base/plinth,
see page 360.
Connecting plinth trim,
see page 365.
Width
mm
Height
mm
Depth
mm
Model No. TS
400 1800 400 8484.300
500 1800 400 8584.300
600 1800 400 8684.300
500 1800 500 8585.300
600 1800 500 8685.300
600 1800 600 8686.300
400 2000 400 8404.300
500 2000 400 8504.300
600 2000 400 8604.300
800 2000 400 8804.300
500 2000 500 8505.300
600 2000 500 8605.300
800 2000 500 8805.300
600 2000 600 8606.300
800 2000 600 8806.300
600 2200 600 8626.300
H
B
T
Baying examples
T

5
0
0
B 600 B 600
T

5
0
0
B 600
T

5
0
0
B

6
0
0
T 500
B

6
0
0
T 500
B

6
0
0
T 500
Correct Incorrect
Note:
Incorrect
B = Width
T = Depth
Doors/locks
Door variants
Glazed door
for TS
Instead of a sheet steel door or rear panel.
Material:
Front panel: Extruded aluminium section
Corner pieces: Die-cast zinc
Viewing window: Single-pane safety glass,
3 mm
Surface finish:
Powder-coated
Colour:
Frame and corner pieces: RAL 7035
Viewing window (printed mask on the inside):
RAL 7015
IP 55 to IEC 60 529
Supply includes:
Viewing door frame with safety glass
Locking rod with double-bit insert
180 hinges (4)
Visible area: W 140 mm, H 160 mm
Also required:
When mounting instead of the rear panel:
Lock components for frame TS 8800.040,
see page 402.
Accessories:
Lock inserts, version F,
see page 421.
Comfort handle,
see page 415.
For enclosures
Model No. TS
Width
mm
Height
mm
600 1800 8610.680
800 1800 8610.880
600 2000 8610.600
800 2000 8610.800
600 2200 8610.620
800 2200 8610.820
Handle adaptor
The handle adaptor compensates for the design
chamfer in the door profile to enable installation of
the comfort handle.
Material:
Plastic
Supply includes:
1 adaptor plate
1 extension for drive
2 assembly screws
For glazed door TS
Colour Model No. TS
RAL 7035 8611.080
For designer door IW and PC-TS, bottom door
Colour Model No. PC
RAL 7035 8611.300
Lock components
for frame TS
For retrofitting a glazed door or sheet steel door
in place of a rear panel.
Material:
Die-cast zinc
Supply includes:
Assembly screws.
4 8800.040
Door variants
Doors/locks
Sheet steel door
for DK-TS
To replace existing doors. With 180 hinges and
swivel handle with security lock no. 3524 E,
in exchange for comfort handle.
Material:
Sheet steel
Colour:
RAL 7035
IP 55 to IEC 60 529
Supply includes:
Assembly parts.
Accessories:
Comfort handle,
see page 415.
180 hinge for bayed TS enclosure suites
with comfort handle,
see page 425.
For enclosures
Model No. DK
Width
mm
Height
mm
600 2000 7824.205
800 1200 7824.127
800 2000 7824.207
600 2200 7824.225
800 2200 7824.227
Sheet steel door, vented
for DK-TS
With 180 hinges and swivel handle with security
lock no. 3524 E, in exchange for comfort handle.
For optimum air throughput in network enclosures
with a high proportion of active components.
Slotted surface with air inlet opening > 78%.
Material:
Sheet steel
Colour:
RAL 7035
Supply includes:
Assembly parts.
Accessories:
Comfort handle,
see page 415.
see page 425.
For enclosures
Model No. DK
Width
mm
Height
mm
600 1800 7824.183
600 2000 7824.203
800 2000 7824.204
600 2200 7824.223
800 2200 7824.224
Glazed door, vented
for DK-TS
With 180 hinges and comfort handle with secu-
rity lock no. 3524 E. For optimum air throughput in
network enclosures with a low proportion of active
components.
Material:
Front panel: Sheet steel
3 mm
Slotted surfaces (SWG-6.7 hexagon) at the
sides for air inlet
Surface finish:
Spray-finished
Colour:
RAL 7035
Supply includes:
Assembly parts.
Accessories:
see page 425.
For enclosures
Model No. DK
Width
mm
Height
mm
600 2000 7824.201
800 2000 7824.202
800 2200 7824.222
Doors/locks
Door variants
Sheet steel door,
vertically divided
for DK-TS
With 130 hinges and locking rod, including com-
fort handle for semi-cylinder with security lock
no. 3524 E. Thanks to the minimal rotation radius
of the individual doors, the distance between indi-
vidual bayed enclosure suites may be reduced.
The extensive door perforations additionally sup-
port climate control of the installed equipment.
Slotted surface with air inlet opening > 78%.
Material:
Sheet steel
IP 55 to IEC 60 529 (unvented)
IP 20 to IEC 60 529 (vented)
Colour:
RAL 7035
Supply includes:
Assembly parts. Accessories:
180 hinge TS 8800.190,
see page 425.
Vented
For enclosures
Model No. DK
Width mm Height mm
600 2000 7824.360
600 2200 7824.362
800 2000 7824.380
800 2200 7824.382
Unvented
1)

For enclosures
Model No. DK
Width mm Height mm
600 2000 7816.360
600 2200 7816.362
800 2000 7816.380
800 2200 7816.382
1)
Without tubular door frame.
Tubular door frame available on request.
Sheet steel glazed door,
vertically divided
for TS
With underlaid viewing panel, 4-point locking rod
and comfort handle for semi-cylinder with secu-
rity lock 3524 E.
The divided design allows room-optimised siting
of the enclosures coupled with the best possible
access, thanks to a reduced distance between
the individual bayed enclosure suites. Max. door
opening angle, thanks to pre-integrated 180
hinges.
Material:
Front panel: Sheet steel
3 mm
Surface finish:
Powder-coated
Colour:
RAL 7035
IP 55
Supply includes:
Assembly parts.
Note:
Height 2200 mm cannot be combined with
swing frame 45 U.
For enclosures
Model No. DK
Width
mm
Height
mm
800 2000 7824.280
800 2200 7824.282
All-glass door,
vertically divided
for DK-TS
With 180 hinges and locking rod including com-
fort handle for semi-cylinder with security lock
no. 3524 E. Thanks to the minimal rotation radius
of the individual doors, the distance between indi-
vidual bayed enclosure suites may be reduced.
Material:
Frame elements: Aluminium
5 mm
Colour:
Frame elements: RAL 7035
Viewing windows: Tinted
Supply includes:
Assembly parts.
Note:
Not to be used in conjunction with a swing frame.
For enclosures
Model No. DK
Width
mm
Height
mm
800 2000 7824.490
Door variants
Doors/locks
Lockable and adjacent door
for TS
For example, if two 400 mm doors instead of one
800 mm wide door are used to comply with
escape routes.
Material:
Sheet steel
Surface finish:
Dipcoat-primed,
powder-coated on the outside
Supply includes:
2 doors
including hinges and lock parts.
Accessories:
Lock system,
see page 415.
For enclosures
Colour
RAL
Model No. TS
Width
mm
Height
mm
800 2000 7035 8801.450
Protective bars
for TS
As an alternative to a door, e.g. in sealed switch
rooms. Prevents people from falling into the open
enclosure frame. Easily removable for mainte-
nance purposes.
For 1200 mm enclosure width; may be shortened
or divided for other sizes.
Material:
Wood, spray-finished, RAL 3000
L
60 x 40
B3
40
6
5
For enclosure width
mm
Length
mm
Packs
of
Model No. TS
1200 1090 1 8801.010
Enclosure
width
mm
Clearance
between the
enclosure frame
(B3) mm
Length
protective bar (L)
mm
400 312 290
1)

600 512 490
1)

800 712 690
1)

1000 912 890
1)

1200 1112 1090
1)
The protective bar TS 8801.010 (1090 mm) will need
to be shortened.
Holder
for protective bars
For location into the vertical TS section.
The protective bar is simply inserted.
Material:
Sheet steel
Surface finish:
Zinc-plated
Supply includes:
Assembly screws.
2 8801.000
Variable modular climate
control concept
Instead of an enclosure door in a 600 mm/
800 mm/1200 mm wide and 1800 mm/2000 mm
high TS enclosure, section doors with integral
cooling module may be retrofitted without major
assembly work.
Possible
alternative:
Modular climate control concept,
see page 248/249.
Doors/locks
Door variants
Trim frame
for TS
To conceal the TS 8 front frame in enclosures
without a door. Can be combined with large
swing frames.
Possible application areas include, for example:
Studio technology
Electronic configuration
Material:
Sheet steel
Colour:
RAL 7035
Supply includes:
Assembly parts.
Note:
The trim frame conceals the system punchings
at the sides in the inner mounting level.
The TS punched sections with mounting flange
23 x 73 mm (see page 460) may be used for
installation.
For enclosures
Model No. DK
Width mm Height mm
600 2000 7824.130
800 2000 7824.132
Interior door
with mounting frame
for compact enclosure AE IP 69K,
stainless steel
For the installation of control and display compo-
nents. Mounting frame, depth-adjustable for a
distance between the outer surface and the inside
of the outer door of 35 to 85 mm (80 mm with
AE 1101.110).
Material:
Sheet steel, 1.5 mm
Colour:
RAL 7035
Supply includes:
Mounting frame
Door with cam lock and screwdriver insert
Assembly parts
For
AE enclosure
W
(B)
mm
H
mm
Model No.
AE
1101.110 160 260 1101.910
1101.120 330 330 1101.920
1101.130 330 580 1101.930
1101.140 580 580 1101.940
2
3
H
B
3
0
3
0
2
3
7
0
Viewing panels/operating panels
Doors/locks
System window
To conceal display and operating instruments or
cut-outs, and to protect against dirt and liquids as
well as unauthorised access.
Consisting of the following 2 components:
1. Base frame:
Easily screw-fastened to the door thanks to
modified dimensions (tubular door frame may
be used as a drilling template).
Readily height-adjustable.
Stabilises the door cut-out.
Conceals the cut edge.
The rain canopy
prevents dirt from landing on the seal,
protects the glass from being lifted out,
prevents the ingress of dirt and moisture
when opening the window.
Frame section height 30 mm or 60 mm
2. Viewing window:
Made from single-pane safety glass:
high level of resistance to solvents and
scratches,
anti-static,
reduced risk of injury if broken.
Cam lock with double-bit insert, easily
exchanged for lock inserts, type A, and semi-
cylinders in the Ergoform-S lock system
(not with FT 2735.500 and .560)
Hinge with 180 opening angle, easily inserted.
Material:
Extruded aluminium sections with die-cast zinc
corner pieces and single-pane safety glass.
Surface finish:
Base frame:
Powder-coated in RAL 7035
Hinge and lock section:
Natural-anodised
IP 54 to IEC 60 529
30 section
To fit
TS, ES
with width
mm
Window size,
exterior, mm
Model No. FT
W (B) H
600 500
270 2735.500
370 2735.510
470 2735.520
570 2735.530
670 2735.540
800 700
270 2735.560
370 2735.570
470 2735.580
570 2735.590
670 2735.250
60 section
To fit
TS, ES
with width
mm
Window size,
exterior, mm
Model No. FT
W (B) H
600 500
370 2736.510
470 2736.520
570 2736.530
670 2736.540
800 700 670 2736.500
Standard double-bit lock insert may be exchanged
for lock inserts 27 mm, type A, see page 421
and for lock system Ergoform-S (except H = 270 mm),
see page 419.
B
85 52 B 137
H
h

2
h

7
0
b 70
47
3
3
6
3
Viewing area (W (B) 137) offset by 16.5 mm
towards the hinge side.
View Y
for profile height 60
View X
for profile height 30
X
Y
Doors/locks
Viewing window
For mounting on
AE instead of door
Surfaces
Material:
Front panel: Aluminium, natural-anodised.
Glass panel: Acrylic
IP 54 to IEC 60 529
Supply includes:
Plastic handle with lock insert no. 3524 E.
Max. installation depth: (depth 4 mm)
Visible area: (width 60 mm) x (height 60 mm)
Note:
Other sizes available on request.
Depth = 34 mm
For use
as door variant with
Width
mm
Height
mm
Model No.
FT
AE 1050.500, AE 1350.500
AE 1007.600
497 497 2733.000
AE 1039.500, AE 1339.500
AE 1009.600, DK 7641.000
597 377 2730.000
AE 1010.500, AE 1054.500
AE 1060.500, AE 1360.500
DK 7643.000
597 597 2731.000
AE 1012.500, AE 1076.500
AE 1376.500, DK 7645.000
597 757 2732.000
for 3 U subrack 597 197 2734.000
Depth = 60 mm
For use
as door variant with
Width
mm
Height
mm
Model No.
FT
AE 1050.500, AE 1350.500
AE 1007.600
497 497 2763.000
AE 1039.500, AE 1339.500,
AE 1009.600, DK 7641.000
597 377 2760.000
AE 1010.500, AE 1054.500
AE 1060.500, AE 1360.500
DK 7643.000
597 597 2761.000
AE 1012.500, AE 1076.500
AE 1376.500, DK 7645.000
597 757 2762.000
Horizontally hinged FT stay
A gas pressurised spring holds the viewing win-
dow securely open (top or side).
When the viewing window is closed, the gas pres-
surised spring disappears into the frame section.
Packs of Model No. FT
2 2772.000
Acrylic glazed cover
With security lock, lock no. 3524 E.
Material:
Front panel:
Extruded aluminium sections with die-cast
corner pieces
Glass panel: Smoked acrylic
IP 54 to IEC 60 529
Acrylic glazed covers, 482.6 mm (19)
Max. installation depth: 43 mm
Visible area: (width 40 mm) x (height 20.5 mm)
Metric acrylic glazed covers
Max. installation depth: 43 mm
Visible area: (width 40 mm) x (height 20.5 mm)
U
Width
mm
Height
mm
Depth
mm
Model No. FT
3 320 158 47.5 2780.000
3 534 158 47.5 2781.000
6 534 291.5 47.5 2782.000
9 534 425 47.5 2796.000
Width
mm
Height
mm
Depth
mm
Model No. FT
400 200 47.5 2784.000
400 400 47.5 2785.000
500 200 47.5 2786.000
500 400 47.5 2787.000
600 200 47.5 2788.000
600 400 47.5 2789.000
Doors/locks
Viewing window
Stainless steel
Fitted as standard with internal 130 hinges and
all-round seal.
The double-bit lock insert may be exchanged
for 27 mm lock inserts, type A, and Ergoform-S
handle SZ 2452.000.
Material:
Single-pane safety glass
IP 54 to IEC 60 529
Supply includes:
Assembly parts.
Accessories:
Lock inserts, 27 mm, version A,
see page 421.
Ergoform-S handle SZ 2452.000,
see page 419.
Width
mm
Height
mm
Depth
mm
Model No. FT
522 600 38 2793.560
25
3
8
3
1
522
408
6
0
0
5
4
3
5
2
5
4
7
5
3
7
.
5
2
8
5
25.5
Monitor frame
For door width 600 and 800 mm
For covering a door cut-out, for all standard
monitors up to 482.6 mm (19).
IP 54 to IEC 60 529
Supply includes:
Security glass pane.
Dimensions
Width
mm
Height
mm
Model No.
SZ
External dimensions 470 430
2305.000 Viewing area 375 325
Cut-out required 415 375
Identification strips
For individual field identifiers on the door,
including transparent cover and assembly parts.
For labels:
Width: Enclosure width 150 mm
Height: 29 mm
Thickness: 0.75 mm.
Colour:
RAL 7033
For enclosure width mm Model No. SZ
600 2403.000
800 2404.000
Doors/locks
Operating panel
For mounting on:
AE instead of door
Surfaces
Frame construction with corner connectors on
the inside, 3 mm aluminium plate secured from
the inside and sealed against the frame
Material:
Aluminium, natural-anodised
IP 54 to IEC 60 529
Supply includes:
Aluminium frame, display panel, hinges, brackets.
Area available for population:
(width 70 mm) x (height 70 mm)
Dimensions of aluminium plate:
(width 54 mm) x (height 54 mm)
Accessories:
Cam lock FT 2749.000,
see page 410.
For use
as door variant
for AE
Width
mm
Height
mm
Depth
mm
Model No.
FT
1001.600
1002.500
1002.600
1032.500
1035.500
197 297 34 2740.000
1)

1004.600
1011.600
1030.500
1031.500
377 297 34 2741.000
1006.500
1006.600
1380.500
377 377 34 2742.000
1008.600
1038.500
1338.500
377 597 34 2743.000
1007.600
1013.600
1050.500
1350.500
497 497 34 2745.000
1009.600
1039.500
1339.500
597 377 34 2744.000
1010.500
1010.600
1060.500
1360.500
597 597 34 2746.000
1)
With AE, only for use on the rear panel
Cam lock
May be retrofitted to the operating area or
enclosure panel of operating panels.
Standard double-bit lock insert may be
exchanged for type C lock inserts and type C
plastic handle.
Accessories:
Lock inserts, type C,
see page 421.
Plastic handle, type C,
see page 420.
Packs of Model No. FT
1 2749.000
Viewing window
for operating panel
For the protection of display and control compo-
nents. With a build height of max. 35 mm.
Material:
Frame: Aluminium, natural-anodised
Glazed panel: Smoked acrylic
Supply includes:
Lock insert no. 3524 E.
For operating panel Model No. FT
FT 2741.000 2791.000
FT 2742.000 2792.000
Allocation of lock systems
Doors/locks
Compact enclosures, sheet steel
Enclosure series Lock inserts for handle systems
EB BG
AE,
wall-mounted
enclosures AE
CM KS
EL
3-part
Semi-cylinder Lock inserts
Condition
W
i
t
h

c
a
m

W
i
t
h

c
a
m
W
i
t
h

3
-
p
o
i
n
t

l
o
c
k
W
i
t
h

c
a
m
W
i
t
h

3
-
p
o
i
n
t

l
o
c
k
3

1
5

U
1
8

2
1

U
L
o
c
k

a
n
d

p
u
s
h
-
b
u
t
t
o
n

i
n
s
e
r
t
s
D
I
N

1
8

2
5
2
V
e
r
s
i
o
n

A
V
e
r
s
i
o
n

F
L
o
c
k

a
n
d

p
u
s
h
-
b
u
t
t
o
n

i
n
s
e
r
t
s

from
page
37 39 44 46 48 50 51 60 60 416 416 421 421 416
Handle systems for enclosures
Comfort handle
For lock inserts 415
For padlock and
lock inserts
415
With security lock insert
E1
415
For semi-cylinder 415
Prepared for
ASSA lock system
415
Mini-comfort handle (from AE enclosure height 380 mm, from AE enclosure width 300 mm)
Ergoform-S handle
Standard 419
Special with lock insert,
lock E1
419
Specially prepared for
ASSA lock system
419
Standard for KS
plastic enclosures
419
Folding lever handle
For padlock and
lock inserts
416
E1
416
Semi-cylinder lock
For AE 422
Plastic handles
Version B 420
Version E 420
T handles
Version B 420
Lock inserts for enclosures
Lock inserts
Version A 421
Version E 421
Version F 421
Lock cylinder inserts
Version B 422
Doors/locks
Large enclosures, sheet steel
T
S

8

PC enclosure TS 8
D
K
-
T
S

T
E

7
0
0
0

Condition
D
o
o
r

F
o
r

k
e
y
b
o
a
r
d

d
r
a
w
e
r

o
r

f
o
l
d
-
o
u
t

t
r
a
y
L
o
c
k

a
n
d

p
u
s
h
-
b
u
t
t
o
n

i
n
s
e
r
t
s
D
I
N

1
8

2
5
2
V
e
r
s
i
o
n

A
V
e
r
s
i
o
n

F
L
o
c
k

a
n
d

p
u
s
h
-
b
u
t
t
o
n

i
n
s
e
r
t
s

from
page
70 108 108 80 85 416 416 421 421 416
Comfort handle
For padlock and lock inserts 415
With security lock insert E1 415
Prepared for ASSA lock system 415
Security handle with code 417
1)

1)

Ergoform-S handle
Standard 419
Special with lock insert, lock E1 419
Special, prepared for
ASSA lock system
419
Lock inserts
Version A 421
Version F 421
1)
Only suitable for use with rear door
Rittal Switzerland
RITTAL AG
Ringstrasse 1 CH-5432 Neuenhof
Phone: +41 (0) 56 416 06 00
Fax: +41 (0) 56 416 06 66
E-mail: [email protected] www.rittal.ch
Doors/locks
Console systems and industrial workstation, sheet steel
TopConsole TP
One-piece console
TP
U
n
i
v
e
r
s
a
l

c
o
n
s
o
l
e
r

T
P
I
W

I
W

e
n
c
l
o
s
u
r
e

f
o
r

t
o
w
e
r

P
C
Condition
D
e
s
k

s
e
c
t
i
o
n

a
n
d

c
o
n
s
o
l
e
P
e
d
e
s
t
a
l
C
o
n
s
o
l
e

c
o
v
e
r
C
o
n
s
o
l
e

d
o
o
r
L
o
c
k

a
n
d

p
u
s
h
-
b
u
t
t
o
n

i
n
s
e
r
t
s
D
I
N

1
8

2
5
2
V
e
r
s
i
o
n

A
V
e
r
s
i
o
n

F
L
o
c
k

a
n
d

p
u
s
h
-
b
u
t
t
o
n

i
n
s
e
r
t
s

from
page
101 101 106 106 107 110 109 416 416 421 421 416
Comfort handle
For padlock and
lock inserts
415
With security lock insert E1 415
Prepared for ASSA
lock system
415
Security handle
with code
417
Ergoform-S handle
Standard 419
lock E1
419
ASSA lock system
419
T handles
Version B 420
Lock inserts
Version A 421
Version D 421
Version F 421
Version B 422
Rittal Hungary
RITTAL Kereskedelmi Kft.
1044 Budapest, Ipari Park u. 1.
Phone: +36 (1) 399 8000
Fax: +36 (1) 399 8009
E-mail: [email protected] www.rittal.hu
Doors/locks
Enclosures and cases, stainless steel
AE
One-piece console
AP
T
S

8
P
C
Condition
W
i
t
h

c
a
m
W
i
t
h

3
-
p
o
i
n
t

l
o
c
k
C
o
n
s
o
l
e

c
o
v
e
r
C
o
n
s
o
l
e

d
o
o
r
L
o
c
k

a
n
d

p
u
s
h
-
b
u
t
t
o
n

i
n
s
e
r
t
s

D
I
N

1
8

2
5
2
V
e
r
s
i
o
n

A
V
e
r
s
i
o
n

F
L
o
c
k

a
n
d

p
u
s
h
-
b
u
t
t
o
n

i
n
s
e
r
t
s
Page 162/163 164 170 170 172 171 416 416 421 421 416
Comfort handle
For padlock and
lock inserts
415
E1
415
Prepared for
ASSA lock system
415
Ergoform-S handle
Standard 419
lock E1
419
ASSA lock system
419
Plastic handles
Version C 420
1)

T handles
Version C 420
1)

Semi-cylinder lock
for AE 422
2)

Lock inserts
Version A 421
Version C 421
Version F 421
Version C 422
1)
Not with AE 1018.600.
2)
Not with enclosures from stainless steel 1.4401 (AISI 316L) and use of cam lock SZ 2304.000.
Rittal Japan
RITTAL K.K.
Sales HQ.
Shin-Yokohama AK Bldg 2F
3-23-3, Shin-Yokohama, Kohoku-ku
Kanagawa 222-0033
Phone: 0120-998-631 / +81 (45) 478-6801
Fax: 0120-998-632 / +81 (45) 478-6880
E-mail: [email protected] www.rittal.co.jp
Lock systems
Doors/locks
Rittal comfort handle
for TS, DK-TS, PC, IW
As the handle does not take up any swing space,
due to its folding mechanism, the door surface
area may be maximised for installed equipment.
Material:
Die-cast zinc
Surface finish:
Powder-coated
Also required:
Handle adaptor for mounting on a
Glazed door TS
Bottom door PC-TS
Designer door IW
see page 402.
For
lock inserts
For
padlock
and
lock
inserts
With
lock insert,
lock E1
1)

For
semi-cylinder
2)

Prepared
for
ASSA
lock
system
Model No. TS
RAL 7032 8611.010 8611.030 8611.040 8611.060 8611.050
RAL 7035 8611.020 8611.290 8611.045 8611.070 8611.280
RAL 8019 8611.250 8611.260 8611.270
RAL 9005 8611.350 8611.360
Matt nickel-plated 8611.330 8611.340
Lock inserts, type F
7 mm square 8611.100 8611.100
8 mm square 8611.110 8611.110
7 mm triangular 8611.120 8611.120
8 mm triangular 8611.130 8611.130
Screwdriver 8611.140 8611.140
Daimler insert 8611.150 8611.150
3 mm double-bit 8611.160 8611.160
Fiat 8611.170 8611.170
6.5 mm triangular
(CNOMO)
8611.220 8611.220
Lock and push-button inserts
Security lock insert
no. 3524 E
3)
8611.180 8611.180 2467.000
Push-button insert 8611.190 8611.190 2468.000
Push-button and
lock insert
3)
8611.200
4)
8611.200
4)
2469.000
5)

Semi-cylinder
to DIN 18 252
6)
9785.040
9785.042
7)

1)
Only for use with VW, Audi, SEAT, SkodaAuto. Supplied without key.
Other VW locks available on request.
2)
Comfort handle for lock cylinder KESO/KABA with Model No. TS 8611.240 available on request.
3)
With 2 keys.
4)
Lock no. 12321, no other lock is possible.
5)
6)
With 3 keys for each lock insert.
7)
Packs of 2. Simultaneous locking within the same pack, no simultaneous locking for different packs.
Doors/locks
Lock systems
Lock inserts
For installation in comfort handle, mini-comfort
handle, Ergoform-S standard, folding lever handle
Lock and push-button inserts Semi-cylinder
Installation in
Comfort handle
6)
,
mini-comfort handle
6)

Comfort handle
7)
,
mini-comfort handle
7)
,
Ergoform-S standard,
folding lever handle CM
Comfort handle,
mini-comfort handle,
Ergoform-S standard,
folding lever handle for CM
Model No. TS Model No. SZ Model No. CS
no. 3524 E
1)
8611.180

2467.000
Push-button insert 8611.190 2468.000
Push-button and
lock insert
1)
8611.200
2)
2469.000
3)

to DIN 18 252
4)
9785.040
9785.042
5)

1)
With 2 keys.
2)
3)
4)
5)
6)
For lock inserts.
7)
For semi-cylinder.
for CM
As the handle does not take up any swing space,
due to its folding mechanism, the door surface
area may be maximised for installed equipment.
Colour:
Enclosure: Similar to RAL 9005
Handle: Similar to RAL 9006
Size:
Length: 242 mm (with inserted trim panel)
Width: 50 mm
Depth: 17.5 mm
For
lock inserts
For
padlock and
lock inserts
With
lock insert,
lock E1
1)

Model No. CM
5001.060 5001.062 5001.061
7 mm square 8611.100 8611.100
8 mm square 8611.110 8611.110
7 mm triangular 8611.120 8611.120
8 mm triangular 8611.130 8611.130
Screwdriver 8611.140 8611.140
3 mm double-bit 8611.160 8611.160
Fiat 8611.170 8611.170
6.5 mm triangular (CNOMO) 8611.220 8611.220
Security lock insert no. 3524 E
2)
2467.000 2467.000
Push-button and lock insert
2)
2469.000
3)
2469.000
3)

Semi-cylinder
to DIN 18 252
4)
9785.040 9785.040
9785.042
5)
9785.042
5)

1)
Other VW locks available on request.
2)
With 2 keys.
3)
Lock no. 2123; no other lock is possible.
4)
5)
Lock systems
Doors/locks
Security handle
with code
Flexible access opportunities with
individual 3-digit code without key
or
with the master key function via an additional
semi-cylinder of 40 or 45 mm to DIN 18 252,
irrespective of the code.
Accessories:
SZ lock and push-button inserts,
see page 416.
Semi-cylinder,
see page 416.
Design with Model No. DK
Comfort handle for TS 7200.800
Ergoform-S handle for TE 7200.810
Adjacent door latch
for TS
For optimum operation of the adjacent door from
the outside if the handle on the inside is difficult
to access due to swing frames or 482.6 mm (19)
installed equipment. Retrospective conversion of
the adjacent door is easily achieved using the
supplied drilling template.
The handle on the inside is no longer required.
Colour:
RAL 7035
Supply includes:
Assembly parts.
Accessories:
exchanged for 27 mm lock inserts, version A,
see page 421.
1 8611.370
Swivel handle
for sheet steel door DK-TS
With lock insert, lock no. 3524 E.
The use of semi-cylinders is not supported.
Length: 150 mm.
Note:
The swivel handle cannot be used in conjunction
with 180 hinges (TS 7824.520).
Position for door opening
Max. projection of the upper handle part
Design Model No. DK
RAL 7035 7829.300
69.7 64
1
2
0
9
0
1 2
1
2
Doors/locks
Lock systems
Locking bar latch to CNOMO
1)

To fit all locking bars in TS doors and glazed
doors with standard lock or comfort handle.
The latch prevents the locking bars from moving
when the door is open.
For mounting on the bolt of the bar guide.
1)
CNOMO is a specification by the French auto-
mobile industry. For safety reasons, it must not be
possible to lock the handle whilst the door is
open.
Also required:
for CNOMO
1)

Lock inserts, version F, 6.5 mm triangular insert
TS 8611.220,
see page 421.
10 8611.210
Spring washer
Upon dismantling the TS locking rods, the spring
washers cannot be reused.
Material:
Spring steel
Surface finish:
Zinc-plated
Spring washer 100 8800.070
Mini-comfort handle
for AE with cam, EL 3-part
Prepared for the installation of lock inserts and
for the installation of commercially available 40
or 45 mm semi-cylinders, and of lock and push-
button inserts.
Material:
Die-cast zinc
Colour:
RAL 7035
For lock inserts For semi-cylinder
Model No. DK
Fro enclosure system EL AE EL AE
7705.110 2537.010 7705.120 2537.000
7 mm square 8611.100 8611.100
8 mm square 8611.110 8611.110
7 mm triangular 8611.120 8611.120
8 mm triangular 8611.130 8611.130
Screwdriver 8611.140 8611.140
3 mm double-bit 8611.160 8611.160
Fiat 8611.170 8611.170
no. 3524 E
1)

8611.180 8611.180 2467.000 2467.000
Push-button insert 8611.190 8611.190 2468.000 2468.000
Push-button and
lock insert
1)

8611.200
2)
8611.200
2)
2469.000
3)
2469.000
3)
Semi-cylinder
to DIN 18 252
4)

9785.040 9785.040
9785.042
5)
9785.042
5)

1)
With 2 keys.
2)
3)
4)
5)
Lock systems
Doors/locks
Ergoform-S lock system
The unlocked handle folds down forwards,
and the lock is opened by swivelling.
Material:
Die-cast zinc
Surface finish:
Powder-coated
Standard
Standard
for KS
plastic enclosures
Special
with
lock insert E1
1)

Specially
prepared for
ASSA
lock system
Model No. SZ Model No. KS Model No. SZ
RAL 7032 with brown handle 2450.000
RAL 7035 with brown handle 2450.010 2456.500
Brown 2451.000 2453.000
Matt nickel-plated 2452.000
RAL 7032 2454.000
RAL 7035 2435.000 1490.010
RAL 7032 with brown handle and
bracket
2455.000
RAL 7035 with brown handle and
bracket
2455.010
Lock inserts, version A
7 mm square 2460.000 2460.000
8 mm square 2461.000 2461.000
7 mm triangular 2462.000 2462.000
8 mm triangular 2463.000 2463.000
Screwdriver 2464.000 2464.000
3 mm double-bit 2466.000 2466.000
Fiat 2307.000 2307.000
Security lock insert no. 3524 E
2)
2467.000 2467.000
Push-button and lock insert
2)
2469.000
3)
2469.000
3)

Semi-cylinder
to DIN 18 252
4)
9785.040 9785.040
9785.042
5)
9785.042
5)

1)
Other lock systems available on request.
2)
With 2 keys.
3)
4)
5)
Doors/locks
Lock systems
Plastic handles
With or without lock cylinder insert.
Supply includes:
Design B C E G
With
lock
cylinder
insert,
lock
no. 3524 E
1)

Without
lock cylinder
insert
With
lock
cylinder
insert,
lock
no. 3524 E
1)

Without
lock cylinder
insert
With
lock
cylinder
insert,
lock
no. 3524 E
1)

Without
lock cylinder
insert
With
lock
cylinder
insert,
lock
no. 3524 E
1)

Model No. SZ Model No. KS Model No. SZ
RAL 9011 2576.000 2533.000 2485.000 2485.100 2599.000
RAL 7030 2439.000
RAL 8019 1484.000 1484.001
1)
With 2 keys
T handles
With or without lock cylinder insert.
Supply includes:
Seal
Design B C
With
lock cylinder insert
1)

Without
With
1)

Without
Model No. SZ
2575.000
2)
2572.000 2535.000
2)
2536.000
1)
With 2 keys
2)
Lock no. 3524 E
Lock systems
Doors/locks
Cam locks
With
double-bit
insert
With
lock cylinder
insert
3)

With
double-bit
insert
With
lock cylinder
insert
3)

With
lock insert,
lock E1
1)

With
double-bit insert
RAL 7035
Material:
Enclosure
Die-cast zinc,
nickel-plated
Made entirely
from
stainless
steel 1.4404
(AISI 316L)
Model No. SZ
2520.000 2530.000 2420.000 2430.000 2540.500 2304.000
Lock inserts
7 mm square 2523.000 2460.000
8 mm square 2526.000 2461.000
7 mm triangular 2527.000 2462.000
8 mm triangular 2528.000 2463.000
Screwdriver 2464.000
3 mm double-bit 2483.000 2466.000
Fiat 2307.000
6.5 mm triangular
(CNOMO)
2460.650
With lock
no. 3524 E
2)

2571.000
1)
Other lock systems available on request.
2)
With 2 keys
3)
Lock no. 3524 E
Lock inserts
Design A C D E F
Material Die-cast zinc Die-cast zinc Die-cast zinc Plastic Die-cast zinc
Length 27 mm 41 mm 47 mm
Model No. SZ Model No. KS Model No. TS
7 mm square 2460.000 2523.000 1487.000 8611.100
8 mm square 2461.000 2526.000 1488.000 8611.110
7 mm triangular 2462.000 2527.000 1485.000 8611.120
8 mm triangular 2463.000 2528.000 1486.000 8611.130
Screwdriver 2464.000 1489.000 8611.140
Daimler insert 2465.000 2522.000 8611.150
3 mm double-bit 2466.000 2483.000 2484.000 1492.000 8611.160
Fiat 2307.000 8611.170
6.5 mm triangular
(CNOMO)
2460.650 8611.220
Doors/locks
Lock systems
Design B C
With lock no. 3524 E
1)
With lock no. 3524 E
1)

Material Die-cast zinc Die-cast zinc
Model No. SZ Model No. SZ
2571.000 2525.000
1)
With 2 keys
Semi-cylinder lock
for compact enclosures AE
For retro-fitting to single-door enclosures with
cam lock.
The cover plate is locked by semi-cylinders with
a total length of 40/45 mm (to DIN 18 252).
An additional cover protects the cylinder against
dirt. The protection category of the enclosure is
not impaired.
Supplied without semi-cylinder.
Material:
Die-cast zinc
Accessories:
Semi-cylinder,
see page 416.
Design Model No. SZ
RAL 7035 2534.100
Nickel-plated (matt) 2534.500
4
9
9
1
.
5
55
9
0
55 28.5
2
7
.
5
7
0
9
0
Lock cover
For padlocks or multiple locks
For retrospective mounting on all compact enclo-
sures AE, of sheet steel and with cam lock.
Material:
Die-cast zinc
Surface finish:
Nickel-plated
1 2493.000
Lock systems
Doors/locks
Multiple lock
for 6 cam locks
The the ideal solution in cases where individual
access for several persons is required for
maintenance and repair purposes.
Material:
Sheet steel
Surface finish:
Zinc-plated
2 2493.500
Lock cover
prepared for lead seal
For all enclosure types with Rittal-specific locks,
such as AE and EB.
Material:
Polyamide
Colour:
RAL 7035
2 2476.000
Security lock
Fitted to doors, to protect against contact with live
electrical equipment whilst the master switch is
ON.
Function:
Locks the door when the main switch is ON.
Mains power (voltage) is only enabled whilst
the door is closed.
Monitoring of the lock magnet via an additional
closing contact.
Supply includes:
Lock
Actuator
Angle bracket
Assembly parts
Also required:
For twin-door enclosures (for the overlapping
door, to indicate enclosure door closed),
Rittal door-operated switch SZ 4127.010,
see page 496.
Connection voltage
for lock magnet
Model No. SZ
230 V AC 11 VA 2416.000
24 V DC 8 W 2418.000
120 V AC 8 VA 2419.000
Doors/locks
Lock systems
Enclosure keys
For lock inserts (one double-bit key is supplied
with every enclosure).
Model No. SZ/QB Model No. SZ
2549.000 2549.500
2)3)

Double-bit key no. 5 2531.000
Security key no. 3524 E 2532.000
1)

7 mm triangular 2545.000
8 mm triangular 2546.000
7 mm square 2547.000
8 mm square 2548.000
For HD locks 2549.600
Daimler key 2521.000
Fiat key 2308.000
Lock 12321 7526.050
1)

1)
Packs of 2
2)
With bit adaptor and reversible bit for multi-tooth size 25 and Phillips-head (Ph 2)
3)
Bit for HD lock insert (Model No. HD 2549.510), see page 156.
Quick-release fastener
for QuickBox
The quick-release fastener is ideal for use in
inaccessible areas. To facilitate locking, the
quick-release fastener is screw-fastened to the
mounting bracket at the front. This enables the
QuickBox to be locked even when the fasteners
of the sides are opened, allowing the enclosure
cover to be attached and removed easily.
Material:
Sheet steel
Surface finish:
Spray-finished
Colour:
RAL 7035
Supply includes:
2 mounting brackets, mounting material and
quick-release fasteners.
Packs of Model No. QB
2 7502.220
Hinges
Doors/locks
130/180 hinges
Supply includes:
Assembly parts
Also required:
1)
Lock components for frame TS 8800.040,
see page 402.
Enclosure type Door variant Material Colour
Packs
of
Model No.
ES 5000 Sheet steel door Die-cast zinc 6 4190.000
TS 8 Sheet steel door Die-cast zinc 4 8800.020
1)

TS 8 Sheet steel door Die-cast zinc
RAL 7035
4
8800.190
RAL 7032 8800.030
RAL 8019 8800.230
RAL 9005 8800.950
Matt nickel-plated 8701.180
TS 8
Doors with high
dynamic loads,
door installations
up to 900 N
Precision casting/
die-cast zinc
RAL 7035 4 8800.710
TS 8 bayed
enclosure suites
with
comfort handle
Sheet steel door Die-cast zinc RAL 7035
4
7824.520
Glazed door Die-cast zinc RAL 7035 7824.525
2)
Sheet steel door Die-cast zinc RAL 9005 7824.522
ES 5000,
TP universal
console,
TP pedestals,
TE 7000
Standard door Aluminium
Powder-coated
in RAL 8019
6 4189.000
ES 5000 Standard door
Stainless steel
1.4301
(AISI 304)
6 4156.000
AE Standard door Die-cast zinc 2 2449.000
CM Standard door Die-cast zinc RAL 9011/9006 3 5001.000
2)
Max. 140
130 180
Hinge pin remover
For safe and easy removal of hinge pins.
For enclosure Model No. SM
AE/CM 2432.000
Cover hinge
for KL
The cover hinge is simply screwed to the enclo-
sure protection channel and to the edge fold.
Supply includes:
Assembly parts.
Material Packs of Model No. KL
Die-cast zinc 6 1592.000
(AISI 316L)
2 1592.010
Cover retainer
for KL
The cover retainer is easily fitted without drilling,
and allows the covers to be opened upwards,
even when the terminal box below is bayed.
Packs of Model No. KL
3 pairs 1591.000
Doors/locks
Door, internal
Support strips
For attachment of
Cable ducts
Cable conduit holders
Contact hazard protection covers
Equipment installed on the door
Cable clamping and attachment
4.5 mm diameter hole on a 25 mm DIN pitch
pattern.
Material:
Sheet steel
Surface finish:
Zinc-plated
Supply includes:
Packs of 20 (screws included).
Accessories:
Screws and self-tapping screws M5,
see page 478.
For TS, CM, ES, TP
For door width
mm
Length
mm
Model No. SZ
400 290 4594.000
500 390 4309.000
600 490 4596.000
800 690 4598.000
900 790 4579.000
1000 890 4599.000
For AE
For enclosures AE Model No. SZ
1018.600
2)
,
1050.500
1)
,
1100.500,
1114.500
1)
,
1213.500
1)
,
1019.500
2)

1057.500
1110.500
1130.500
1350.500
1)

2325.000
1009.600
2)
,
1012.500
2)
,
1054.500,
1060.500,
1090.500,
1339.500,
1376.500
1039.500
1058.500
1076.500
1260.500
1)

1360.500
2326.000
1014.500
2)
,
1077.500
1073.500
2327.000
1016.500
2)
,
1055.500,
1280.500
1)

1017.500
2)

1180.500 2328.000
1)
For these AE models, the support strips should be cut
to length at the knockout.
2)
Only in conjunction with perforated mounting strips
(see page 427).
Spacers
The universal assembly component for all cases
where a distance from the mounting level is
required. With self-tapping thread for diameter
4.5 mm. The following components may be
attached to the rear using 5.5 x 13 mm screws:
Top-hat/cross rails
Contact hazard protection covers
Master switch trim panels
Cable clamp rails,
etc.
Material:
Hexagonal steel (SW8)
Surface finish:
Zinc-plated
Accessories:
Screws 5.5 x 13 mm,
see page 478.
Length
mm
25 12 2311.225
50 12 2311.250
5
0
2
5
Door, internal
Doors/locks
Perforated mounting strip
for AE stainless steel, TP universal console
1)

For vertical mounting on the threaded bolts of the
door, for attaching
Support strips for AE, see page 426.
Door stay SZ 2519.000, see page 429.
3.7 mm diameter hole on a 25 mm DIN pitch
pattern.
Material:
Sheet steel
Surface finish:
Zinc-plated
Supply includes:
Packs of 20 (nuts and serrated washers included).
Accessories:
Screws,
see page 478.
To match AE
Length
mm
Model No. SZ
1005.500, 1005.600,
1006.500, 1006.600,
1009.600
318 2310.038
1)

1012.600, 1014.600 698 2310.076
1016.600, 1018.600 938 2310.100
1017.600, 1019.500,
1019.600
1138 2310.120
1)
For door at top
Utility lectern
For programming units etc. Prepared for mount-
ing on the tubular door frame of TS, CM, ES, PC or
on any sufficiently large surface.
When required for servicing, it folds down quickly
with a maximum support area, and after use is
stowed between the tubular door frames in a
space-saving design.
Load capacity: max. 30 kg.
Material:
Sheet steel
Colour:
RAL 7035
Support area
For door
width
mm
Model No. TS
Width
mm
Depth
mm
413 400 600 4638.600
613 400 800 4638.800
Wiring plan lectern
Holds wiring plans during fault finding and main-
tenance work.
The wiring plan lecterns can be bayed according
to the door width.
For mounting on the tubular door frame.
Material:
Utility lectern: Polypropylene
Mounting bracket: Die-cast zinc
Colour:
Similar to RAL 7035
Supply includes:
Wiring plan lectern (width 210 mm)
Assembly parts
For enclosures Packs of Model No. TS
TS, CM, ES, PC, TP 1 4120.000
For door width
mm
Required/possible number
of wiring plan lecterns
min. max.
400 1 1
500 1 1
600 2 2
800 2 3
1000 3 3
CD/disk box
For fixing to all flat, clean surfaces with double-
sided adhesive tape.
Capacity:
Max. 10 CDs/DVDs or 18 (3
1
/2) disks.
Material:
Polyamide
Colour:
RAL 7033
1 2446.000
Doors/locks
Door, internal
Plastic wiring plan pockets
for AE
For installation options, refer to table
B = Screw-fastened to the perforated door strip
on both sides
E = Screw-fastened on one side, other side
stuck with adhesive
or stuck entirely with adhesive
Supply includes:
2 holders with double-sided adhesive tape
Acrylic glazed pane
Assembly parts
Note:
The acrylic glazed pane may be shortened to any
required size for shorter doors.
Model No. SZ 2514.500 2514.600 2514.800
Usable width mm 340 415 615
Usable depth mm 18 18 18
Height of acrylic glazed pane mm 167 167 167
For Model No. AE Width mm
1050.500 500 B
1054.500 600 E E
1055.500 800 E E E
1057.500 500 B
1058.500 600 E E
1060.500 600 E E
1073.500 760 E E
1076.500 600 E E
1077.500 760 E E
1090.500 600 E E
1100.500 1000 B
1110.500 1000 B
1114.500 1000 B
1)

1130.500 1000 B
1180.500 800 E E E
1213.500 1000 B
1)

1260.500 600 E B
1280.500 800 E E B
1350.500 500 B
1360.500 600 E E
1376.500 600 E E
1)
Prepared for mounting on the l/h side door; for mounting on the r/h side door, the acrylic glazed pane can be
shortened.
Plastic wiring plan pockets
For affixing to the inside surfaces of doors.
Material:
Polystyrene with self-adhesive fastening strips.
Colour:
Similar to RAL 7035
For format
Clearance opening
mm
Model No. SZ
B H D
A3 landscape 438 286 45 2513.000
A4 portrait 228 254 17 2514.000
A5 landscape 228 174 17 2515.000
Wiring plan pockets
with transparent pouch
With welded-on transparent pouch and self-adhe-
sive backing.
For format Model No. SZ
DIN A4 2510.000
DIN A3 2512.000
Door, internal
Doors/locks
Wiring plan pockets
of sheet steel
for TS, CM, ES, PC, TP pedestal
For fastening to tubular door frames at any height.
Colour:
RAL 7035
Supply includes:
Assembly screws.
D = 90 mm
D = 35 mm
To fit door width
mm
Clearance opening
mm
Model No. TS
W H
400 255 210 4114.000
500 355 210 4115.000
600 455 210 4116.000
800 655 210 4118.000
900 755 210 4123.000
1000 855 210 4124.000
To fit door width
mm
Clearance opening
mm
Model No. TS
W H
500 355 260 4115.500
600 455 260 4116.500
800 655 260 4118.500
Door stay
To secure the door in the open position.
For Assembly
Packs
of
Model No.
TS, ES, PC,
TP universal console
Bottom 5 4583.000
AP one-piece console Top 5 2518.000
CM, TP Top 2 2519.200
AE (except AE 1032.500
and AE 1035.500) and
all AE stainless steel
enclosures
1)

Top 5 2519.000
AE IP 69K Top 1 1101.800
1)
With AE stainless steel, only in conjunction with
perforated mounting strips, see page 427.
Door stay for escape routes
TS sheet steel/stainless steel doors
with tubular door frames
In case of an emergency, conventional door stays
can block the escape route. The stay is actuated
automatically in the event of pressure, releasing
the door in both directions. In conjunction with
180 hinges, this ensures that no escape routes
are blocked by locked doors in the event of an
emergency.
Supply includes:
Assembly parts.
Accessories:
180 hinge,
see page 425.
1 4583.500
130 90
180 hinge
Doors/locks
Door, internal
Ride-up roller
for TS, ES, PC
Lifts the door with heavy installed equipment
(e.g. cooling unit) as a closing aid. For attaching
to the tubular door frame.
10 4538.000
Transport and mounting handle
for doors TS, ES
For safe installation and removal of the door and
during relocation in the workshop. The matching
hinge pin removal tool for 130 hinges is pre-inte-
grated, and supplied loose for 180 hinges.
Packs of Model No. SM
1 2415.100
Document clip, magnetic
For simple attachment of installation documenta-
tion as a reminder or for flexible accommodation
of a wide range of documents, measurement
records, test reports etc. May be attached to any
magnet compatible surface via a permanent mag-
net.
Material:
Plastic: Transparent
Handle pieces: Black
Supply includes:
2 mounting clamps
Permanent magnet
2 7950.200
Alternate frame, magnetic
For individual marking or labelling of the existing
network infrastructure.
The magnetic surface facilitates flexible mounting
on all magnet compatible surfaces. Adhesive
strips are supplied for non-magnetic compatible
surfaces.
The maximum size of the labels is 130 x 50 mm.
Material:
Plastic
Supply includes:
Alternate frame, magnetic
Labels
Double-sided adhesive tape
10 7950.150
Roof
Roof/wall mounting
Rain canopies
for AE, CM
Reliable protection for outdoor siting with water
run-off to the rear. Easily retro-fitted.
Supply includes:
Assembly parts.
Accessories:
Condensate discharge,
see page 384.
Pressure relief stopper,
see page 384.
Wall mounting brackets SZ 2503.010 and
SZ 2508.010 may be used,
see page 439.
Note:
For outdoor siting, we generally recommend a rain
canopy above the enclosure or the gap between
the door or screw-fastened rear panel and the
enclosure, in order to protect against water and
UV radiation.
The tests of IP protection categories for water pro-
tection (2nd code number to EN 60 529) cannot
be compared with an enclosure sited outdoors or
under similar conditions.
Upon request, rain canopies of sheet steel, stain-
less steel or aluminium can also be produced for
other enclosures.
for AE, sheet steel version
Material:
Sheet steel
Surface finish:
Powder-coated, textured paint
Colour:
RAL 7035
For
Model No. SZ
Enclosure width
mm
Enclosure depth
mm
380 210 2501.500
600 210 2502.500
600 350 2511.500
for AE, stainless steel version
Material:
Surface finish:
Brushed, grain 240
Possible
alternative:
Compact enclosures Hygienic Design,
see page 153.
T1
T2 38 1.25
2
5
5
0
1
5
.
5
B
1
2
3
2
3
For
Model No. SZ
Enclosure width
mm
Enclosure depth
mm
200 155 2470.000
300 210 2361.000
380 155 2471.000
380 210 2472.000
500 210 2362.000
600 210 2473.000
760 300 2474.000
800 300 2475.000
1000 300 2363.000
B1 =
T1 =
T2 =
Enclosure width + 11 mm
Enclosure depth + 25 mm
Enclosure depth 90 mm, from enclosure
width 600 mm: Enclosure depth 115 mm
for CM, sheet steel version
Benefits:
Mounting via the two holes in the top of the CM
At the front, with integrated ventilation holes at
the top
Material:
Sheet steel
Surface finish:
Powder-coated, textured paint
Colour:
RAL 7035
6
.
5
6
.
5
6.5 12.5
1
3
3
2
.
5
2
5
Enclosure
depth
1 1
2
Enclosure
width
2
Width
mm
Depth
mm
Model No. CM
600 400 5001.310
800 400 5001.330
1000 400 5001.350
1200 400 5001.360
Roof/wall mounting
Roof
Dust guard trim
for AE, CM, EB, KL and BG
To protect against deposits on the upper edge of
the door and between the enclosure and the door/
lid. Cut the door protection strip to length accord-
ing to the enclosure width. Drill the enclosure and
mount the strip using the adhesive strips and
screws.
Material:
Plastic, UV-resistant
Colour:
Similar to RAL 7024
For
enclosure
Length
mm
A
mm
Model No.
SZ
AE
1200
25
2426.500 CM 20
KL, EB, BG 20.5
5
A
6
60
Dust guard trim
for TS, ES
To protect against dust deposits on the upper
edge of the door and between the door and upper
horizontal enclosure section. The dust guard trim
provides space for texts or company logos.
Colour:
RAL 7035
Supply includes:
Clear plastic strip for text labels (height 29.5 mm).
Note:
Also suitable for use in conjunction with top
baying cover, see page 399.
Length mm Model No. SZ
600 2424.100
800 2425.100
1000 2427.100
1200 2426.100
Roof
Roof/wall mounting
6
0
6 B
- 3
1
5
0
B
- 8
8
2
0
0
5
1
2
Top mounting module
for TS
As a cable chamber for cable infeed from above
or for power distribution with busbar systems
across bayed enclosures. The TS cover plate is
used as standard to finish off at the top. The
enclosure height is increased by 200 mm with the
top mounting module fitted.
The top baying cover cannot be fitted. Installation
accessories for top and bottom, see diagram and
explanations below.
Material:
Sheet steel, 1.5 mm
Surface finish:
Spray-finished, textured paint
Colour:
RAL 7035
IP 55 to IEC 60 529, compliant with NEMA 12
(in conjunction with side panel for top mounting
module, see page 433).
Supply includes:
1 frame module
2 trim panels (front and rear)
8 retainers with automatic
potential equalisation
4 tapped rods with eyebolts
For enclosures
Model No. TS
Width (B)
mm
Depth
mm
600 600 8801.735
800 600 8801.745
1000 600 8801.755
1200 600 8801.765
Accessories:
Designation Page
TS punched rail 18 x 38 mm 462
PS punched rail 23 x 23 mm
with angle bracket
463
PS punched rail 23 x 23 mm
with support bracket
463
PS punched section without
mounting flange 23 x 73 mm,
with support bracket PS
464
PS punched section
with mounting flange 23 x 73 mm
464
Support rail 466
System support rails 466
C rail 30/15
with support bracket or spacer
465
Cable clamp rail 527
TS punched rail 25 x 38 mm 461
TS punched section without
mounting flanges, 45 x 88 mm
461
1
1 7 8 9
2 3 4 5
6
11
10
1
2
3
4
5
6
7
8
9
10
11
Side panel
for top mounting module
To finish off the side of a top mounting module or
bayed suite.
Material:
Sheet steel, 1.5 mm
Surface finish:
Spray-finished, textured paint
Colour:
RAL 7035
Supply includes:
2 side panels
8 retainers with automatic potential equalisation
2 8801.775
Roof/wall mounting
Roof
Roof plates
for SV-TS
For SV-TS 8 enclosures without roof plate and in
exchange for the standard roof plate for other TS
enclosures.
Material:
Sheet steel, 1.5 mm
Surface finish:
Textured paint
Colour:
RAL 7035
Supply includes:
Assembly parts.
IP 55, solid
IP 43 with ventilation hole
Build height: 93 mm
IP 2X with ventilation hole
Build height: 72 mm
With pressure relief valve
Build height: 25 mm
For enclosures
Width
mm
Depth
mm
300 600 1 9671.636
400 600 1 9671.646
600 600 1 9671.666
800 600 1 9671.686
300 800 1 9671.638
400 800 1 9671.648
600 800 1 9671.668
800 800 1 9671.688
For enclosures
Width
mm
Depth
mm
300 600 1 9671.736
400 600 1 9671.746
600 600 1 9671.766
800 600 1 9671.786
300 800 1 9671.738
400 800 1 9671.748
600 800 1 9671.768
800 800 1 9671.788
For enclosures
Width
mm
Depth
mm
400 600 1 9671.846
1)

600 600 1 9660.235
800 600 1 9660.245
1000 600 1 9660.255
1200 600 1 9660.265
400 800 1 9671.848
1)

600 800 1 9659.525
1)

800 800 1 9659.535
1)

1000 800 1 9659.545
1)

1200 800 1 9659.555
1)

1)
For enclosures
Width
mm
Depth
mm
400 600 1 9671.446
600 600 1 9660.935
800 600 1 9660.945
1000 600 1 9660.955
1200 600 1 9660.965
400 800 1 9671.448
600 800 1 9671.468
800 800 1 9671.488
For cable entry glands
Also required:
Cable entry gland,
see page 435.
For enclosures
Required
number
of glands
Packs
of
Model No. SV
Width
mm
Depth
mm
600 400 2 1 9665.943
850 400 3 1 9665.953
1100 400 4 1 9665.963
300 600 2 1 9671.536
400 600 3 1 9671.546
600 600 4 1 9665.903
800 600 8 1 9671.586
850 600 6 1 9665.913
1100 600 8 1 9665.923
300 800 2 1 9671.538
1)

400 800 4 1 9671.548
600 800 8 1 9671.568
1)

800 800 8 1 9671.588
1)

1)
Roof
Roof/wall mounting
1
2
3
4
5
Cable entry glands
Including seal
External dimensions 250 x 160 mm
Design Material Colour Packs of Model No. SV
14 x M25/32
Insulating
material
RAL 7032 1 9665.750
2 x M25/32/40, 1 x M32/40/50, 2 x M40/50/63
Insulating
material
RAL 7032 1 9665.760
With sealing membranes
32 x 7 16 mm, 4 x 10 20 mm, 3 x 14 26 mm
Insulating
material
RAL 7032 1 9665.770
With entry glands up to 66 mm diameter
Insulating
material
RAL 7032 1 9665.780
Solid
Sheet steel,
spray-finished
RAL 7035 4 9665.785
1
2
3
4
5
R
2
5
1
3
5
223
1
3
8
226
4
.5
Cut-out dimensions for
SV 9665.750 to SV 9665.785
Roof/wall mounting
Roof
Roof plate
for cable entry, two-piece
for DK-TS
In exchange for the standard roof. Equipped
with a sliding angular bracket in the rear section.
Rubber cable clamp strip on both sides for
attaching cable bundles and bunched cables.
Thanks to the symmetrical design of the TS 8
frame, side cable entry can also be achieved by
rotating the roof plate.
The two-piece design additionally allows easy
retro-fitting, by simply removing the front part of
the plate for retrospective cable entry.
For active ventilation, a fan mounting plate may be
fitted in the front section of the enclosure (not in
conjunction with 482.6 mm (19) mounting frames).
To this end, the roof plate must be raised by at
least 20 mm using spacers.
Material:
Sheet steel
Colour:
RAL 7035
Accessories:
Fan mounting plate,
see page 221.
Spacers,
see page 438.
Detailed drawing:
For enclosures
Model No. DK
Width
mm
Depth
mm
600 400 7826.645
1)

600 600 7826.665
600 800 7826.685
600 1000 7826.605
600 1200 7826.625
800 400 7826.845
800 600 7826.865
800 800 7826.885
800 1000 7826.805
1200 400 7826.245
800 1200 7826.825
1)
Roof plate, multi-piece
for side cable entry in TS
The roof plate allows side cable entry on both
sides across the entire enclosure depth. Sliding
brackets at the sides allow variable adaptation of
the entry opening. Additional rubber cable clamp
strips secure the inserted cable bundles and
cable sections.
The multi-piece design allows convenient retro-
fitting, as the roof plate is removable even with the
cables already inserted.
Passive ventilation is supported by raising the roof
with spacers.
Material:
Sheet steel
Surface finish:
Spray-finished
Colour:
RAL 7035
Supply includes:
Assembly parts.
Accessories:
Spacers,
see page 438.
For enclosures
Model No. DK
Width
mm
Depth
mm
800 1000 7526.807
800 1200 7526.827
1)

1)
Roof
Roof/wall mounting
Roof plate
for cable entry on all sides
for DK-TS
The roof plate has sliding plates for cable entry
on all four sides, and therefore allows individual
selection of cable routing tailored to the specific
requirements. After cable entry, the sliding plate is
closed again as far as possible, and the rubber
cable clamp strips supplied loose then seal the
cable entry area.
Material:
Sheet steel
Colour:
RAL 7035
Supply includes:
Assembly parts.
Detailed drawing:
For enclosures
Model No. DK
Width
mm
Depth
mm
800 800 7826.588
Roof plate, vented
for DK-TS
In exchange for the standard roof.
Variant 1:
72 mm high roof plate, all-round vent slots, option-
ally with clamp strip for cable entry. The two-piece
design with cable entry allows easy retro-fitting,
by simply removing the front part of the plate. The
cables are held in position via a guide at the side.
Material:
Sheet steel
Colour:
RAL 7035
One-piece without cable entry
Two-piece with cable entry
For enclosures
Model No. DK
Width
mm
Depth
mm
600 600 7826.766
600 800 7826.768
600 1000 7826.760
1)

800 600 7826.786
800 800 7826.788
800 1000 7826.780
1)
For enclosures
Model No. DK
Width
mm
Depth
mm
600 600 7826.669
600 800 7826.689
800 600 7826.869
800 800 7826.889
800 1000 7826.809
Variant 2:
Ventilation holes ( 5 mm) are incorporated all-
round into the 97 mm high roof plate. In conjunc-
tion with the vented glazed and sheet steel door,
the roof plate matches the door design to perfec-
tion.
Material:
Sheet steel
Colour:
RAL 7035
Accessories:
Fan mounting plate,
see page 221.
Detailed drawing:
For enclosures
Model No. DK
Width
mm
Depth
mm
800 600 7826.866
800 800 7826.886
800 1000 7826.806
1)

1)
Roof/wall mounting
Roof
Roof mounting screw
For screw-fastening the roof plate instead of
eyebolts. With the TS 8, the contact washers for
potential equalisation may be taken from the eye-
bolts included with the supply of the enclosures.
Material:
Steel
Surface finish:
Zinc-plated
20 4198.000
Spacers
for roof plate TS
To raise the TS 8 roof for ventilation purposes,
in three different heights.
Not suitable for crane transportation!
Material:
Hexagonal sectional steel
Surface finish:
Zinc-plated
Supply includes:
Assembly parts.
Height mm Packs of Model No. SZ/DK
10 4 2422.000
20 4 2423.000
50 4 7967.000
Eyebolts
for TS, ES
For crane transportation of enclosures, where
not already included in the supply.
Thread: M12
4 4568.000
Eyebolts
for CM
For crane transportation of enclosures, with
reinforcement plate to be inserted underneath.
Mounting via the two holes in the top of the CM.
Thread: M12
Supply includes:
Eyebolts
Reinforcement plates
Packs of Model No. CM
2 2509.500
Eyebolts
for AE
For crane transportation of enclosures, with
reinforcement plate to be inserted underneath.
Thread: M12
Supply includes:
Eyebolts
Reinforcement plates
4 2509.000
Wall mounting
Roof/wall mounting
For the attachment of KL, EB, BG and EL enclo-
sures as well as DK wall-mounted distributors.
Supply includes:
Note:
For hygiene reasons, and in view of the protec-
tion category, the stainless steel enclosures do
not have any drilled holes for the wall mounting
brackets.
Material
Wall distance
mm
Packs
of
Model No.
SZ
Brass,
nickel-plated
8 4 1580.000
Sheet steel
zinc-plated,
passivated
8 4 1590.000
Stainless steel
1.4301 (AISI 304)
8 4 1594.000
20
2
0
20
1
0
1
0
8 25

8
.
2
for AE
For attaching to the enclosure from the outside.
Simply insert the expandable dowel into the
enclosure hole from the outside, and screw-
fasten the wall bracket from the outside.
Material:
Sheet steel
Surface finish:
Zinc-plated
Supply includes:
Wall bracket pre-fitted with seal and expandable
dowel.
Wall distance
mm
15 4 2508.100
For the attachment of KL, EB, BG, AE, CM and
EL enclosures, TP consoles as well as DK wall-
mounted distributors and small fibre-optic distrib-
utors.
Supply includes:
Possible
alternative:
Wall spacer bracket Hygienic Design,
see page 156.
Material
Wall distance
(A) mm
Packs
of
Model No.
SZ
Sheet steel
zinc-plated,
passivated
40 4 2503.010
10 4 2508.010
Stainless steel
1.4301 (AISI 304)
10 4 2433.000
Stainless steel
1.4404 (AISI 316L)
10 4 2433.500
20
2
0
29
1
5
1
5

1
0
.
2
54 A
Roof/wall mounting
Wall mounting
for KS
For attachment to the wall, only possible from the
outside of the enclosure.
Material:
1)

Supply includes:
Assembly parts for mounting on the
enclosure.
11.5
3
5
50
30

8
.
5
Colour Packs of Model No. KS/KE
1)

1)
With graphite additive for Ex applications.
Wall angle
For compact enclosures (additional holes required
in the enclosure).
Supply includes:
Material Colour Packs of Model No. SZ
Sheet steel RAL 7035 4 2505.510
Stainless steel
1.4301 (AISI 304)
4 2583.010
70
3
5
3
4 6
.
5
2
6
R
4
2
0
13
90
2
Wall bracket
For wall mounting of TS and ES enclosures at the
roof, e.g. with heavy components on the door or
built-in swing frame.
Material:
Sheet steel
Surface finish:
Zinc-plated
Possible
alternative:
With TS 8 inside the enclosure
(without mounting plate),
baying bracket TS 8800.470,
see page 398.
4 4595.000
Wall mounting
Roof/wall mounting
for CS wall-mounted enclosures
For mounting on a wall or panel.
Material:
4 9765.120
Pole clamp
for KL, EB, BG, AE, KS and CS wall-mounted
enclosures
For reliable, convenient fastening to round or
square poles.
For pole diameter/size:
from 40 to 190 mm
from 50 to 150 mm
Material:
Mounting angles, clamping section:
Sheet steel
Clamping strap:
Surface finish:
Mounting angles, clamping section: Zinc-plated
Supply includes:
2 mounting angles, 600 mm long
4 clamping sections
2 clamping straps
4 clamping brackets
4 screws and captive nuts M8
for mounting on the enclosure.
1 set 2584.000
Enclosure connectors
Adjustable
Between Command Panels, terminal boxes,
compact enclosures and horizontal or vertical
surfaces.
Pre-mount the connector halves on both sides,
screw together and secure with a locking screw,
and/or adjust the angle of rotation.
Rotation range:
105 adjustable in 7.5 stepped increments.
Material:
Die-cast zinc
Surface finish:
Powder-coated
Colour:
RAL 7035
Supply includes:
Assembly parts for both sides.
Note:
The locking screws may be exchanged for
standard, commercially available clamping
levers (M10 x 50 mm).
1 set 6016.200
1
0
5
1
0
5
5
4
5
4
Roof/wall mounting
Wall mounting
Frame connector, adjustable
for Comfort Panel
Between the command panel and keyboard
housing and horizontal or vertical surfaces.
Rotation range:
Adjustable in 8 stepped increments,
see drawing.
Material:
Die-cast zinc
Surface finish:
Powder-coated
Colour:
RAL 7024
Supply includes:
Assembly parts and clamping levers for both
sides.
1 set 6005.500
1
2
0
104
3
2
6
4
4
7
.
5
14/+178
Vertically hinged
Between the Compact Panel and horizontal or
vertical surfaces.
Rotation range:
180 adjustable on a 7.2 pitch pattern.
Material:
Wall mounting bracket:
Sheet steel
Knurled screw:
Steel with plastic knurled handle
Supply includes:
Locking screw and assembly parts for mounting
on the Compact Panel.
1 set 6341.000
Mounting plates
Mounting plates
for KL and KL-HD
For component installation outside of the enclo-
sure. Assembly screws included as accessories
with the enclosure.
Material:
Sheet steel, 2 mm
Surface finish:
Zinc-plated
Accessories:
Self-tapping screws SZ 2487.000,
see page 478.
Possible
alternative:
Support rails,
see page 467.
Detailed drawings:
For size
mm
For Model No. KL and KL-HD Model No. KL
150 x 150 1500.510, 1514.510, 1521.010, 1527.010, 1670.600, 1671.600 1560.700
200 x 150 1528.510, 1529.510 1575.700
300 x 150 1501.510, 1515.510, 1522.010, 1530.510 1561.700
400 x 150 1589.510 1576.700
200 x 200 1502.510, 1516.510, 1523.010, 1528.010, 1672.600 1562.700
300 x 200 1503.510, 1517.510, 1524.010, 1529.010, 1531.510, 1674.600 1563.700
400 x 200 1504.510, 1518.510, 1525.010, 1532.510, 1675.600 1564.700
500 x 200 1505.510, 1533.510 1565.700
300 x 300 1507.510, 1526.010, 1535.510 1567.700
400 x 300 1508.510, 1530.010, 1536.510, 1676.600 1568.700
500 x 300 1509.510, 1537.510 1569.700
400 x 400 1511.510, 1539.510 1571.700
Mounting plate infill
for TS
For a continuous mounting surface in bayed
suites where the mounting plate is set forward.
Material:
Sheet steel, 2 mm
Surface finish:
Zinc-plated
Supply includes:
Assembly parts.
mm
Model No. TS
1800 4590.700
2000 4591.700
2200 4592.700
Mounting plates
Mounting plate attachment
For additional clamping and to reduce potential
vibration of the mounting plate. Select according
to mounting position, installation type and enclo-
sure.
Material:
Sheet steel
Surface finish:
Zinc-plated
Supply includes:
Assembly parts.
For TS
Side, at half height in conjunction with
mounting plate infill
In the penultimate position
Set forward (supplied state)
Benefit:
No impairment to the mounting surface, but
mounting is only possible from the enclosure rear.
Accessories:
Mounting plate infill,
see page 443.
10 8800.630
For TS
Side
Rear, flush with enclosure frame
Benefit:
No impairment to the mounting surface, but
mounting is only possible from the enclosure rear.
10 8800.610
For TS
Side
Set forward on a 25 mm pitch pattern
Benefit:
No impairment to the mounting surface.
May optionally used for attachment or screw
fastening.
Also required:
Punched section with mounting flange
17 x 73 mm for the inner mounting level,
see page 459 (with Fig. 3).
10 8800.090
2 1
3
Mounting plate screw-fastened in the rear-
most installation position.
Mounting plate screw-fastened from the rear
in the rearmost installation position.
Mounting plate in a set forward position, either
attached or screw-fastened (not shown).
1
2
3
For TS
Side
Slide over the plate at the side and secure with
screws. Additionally, the mounting plate may be
drilled and screw-fastened at the rear C-edge.
10 8800.050
Mounting plates
For additional clamping and to reduce potential
vibration of the mounting plate. Select according
to mounting position, installation type and enclo-
sure.
Material:
Sheet steel
Surface finish:
Zinc-plated
Supply includes:
Assembly parts.
For TS, ES
All-round
Set forward on a 25 mm pitch pattern
Slide in between the bar and plate from below or
above or from the side, and secure with screws.
Also required:
Support strip (with TS for inner level),
see page 462 or
(with TS for inner level),
see page 459 or
Punched rails and punched sections without
mounting flange,
see page 463/464.
10 4593.000
For TS, ES
On the top and bottom of the mounting plate
(with ES all-round)
Screw in the clip behind the plate and secure with
screws.
10 4576.000
Installation kit
for mounting plates TS, back-to-back
The minimal distance between the two mounting
plates ensures a maximum installation depth for
installed equipment on both sides.
Material:
Sheet steel
Surface finish:
Zinc-plated
Note:
Build height front and rear
with central installation =
(enclosure depth 48 mm) : 2
For example:
TS 8806.521 = Depth 600 mm
Build depth = 2 x 276 mm
1 set 8800.280
Mounting plates
Mounting plate slide block
for CM
In this way, populated mounting plates slide easily
into the mounting position for installation and/or
clip-fastening.
Benefits:
Installation without drilling
Simply screw-fasten to the existing holes in
the mounting plate
May be reused, unscrew to detach
Material:
Polyamide
Colour:
Similar to RAL 9011
Supply includes:
Assembly parts.
2 5001.070
Slide rails
for mounting plate TS
Slides in from the side.
Attachment of the mounting plate to the slide
rails via captive nuts and screws.
Mounting of the slide rails directly on the enclo-
sure frame, depth-adjustable on a 25 mm pitch
pattern.
Possible mounting depth T6 25 mm,
refer to the Internet.
Material:
Sheet steel
Surface finish:
Zinc-plated
Supply includes:
Assembly parts.
For enclosure width
mm
600 2 8802.260
800 2 8802.280
1200 2 8802.220
Mounting plate adjustment
bracket
for KS
Infinitely adjustable.
Other equipment can also be installed in this way,
instead of the mounting plate.
Material:
Sheet steel
Surface finish:
Zinc-plated
Supply includes:
Assembly parts.
Enclosure width:
76 mm (KS 1481.000)
104 mm (KS 1491.000)
Enclosure height:
150 mm
B
H
For enclosures KS Packs of Model No. KS
1423.500, 1432.500,
1434.500, 1444.500,
1446.500, 1448.500,
1449.500, 1466.500,
1467.500
4 1481.000
1400.500, 1453.500,
1454.500, 1468.500,
1469.500, 1479.500,
1480.500
4 1491.000
M8 x 15
B
H
Mounting plates
for CM, TP one-piece console, TP pedestal
for high dynamic loads
For example, if a direct connection between the
mounting plate and the enclosure is required
(cranes etc.).
Tested as per DIN EN 60 721 severity 4M4, with
a weight of 150 kg evenly distributed over the
mounting plate.
Simply screw-fasten to the existing holes in the
mounting plate to pre-assemble for:
Wall mounting from the inside
Direct using a bracket and wall/support mounted
enclosure.
Wall mounting from the outside
Screws for wall mounting brackets (see page 439)
can easily be screwed into the plate nuts from the
outside.
Material:
Sheet steel
Surface finish:
Zinc-plated
Supply includes:
Assembly parts.
1 set 5001.075
Cross-brace
for mounting plates
for TS, ES
Additional horizontal rigidity for vibration resist-
ance and/or stabilisation of wide mounting plates.
This brace may also be used as an attachment
aid for heavy components.
Material:
Sheet steel
Surface finish:
Zinc-plated
Supply includes:
2 sections
4 clamping sections
4 grub screws M10 x 16 mm
For enclosure width
mm
Model No. TS
1200 4333.120
1600 4333.160
1800 4333.180
Other widths available on request.
Transport handles
for mounting plates
for TS, ES
May be used at any given position in the side
C-fold
Benefits include:
Can be used for people of different heights
Optimised force transmission
Easy handling
2 2415.500
Mounting plates
for TS, CS Toptec
For
Universal interior installation, also in conjunc-
tion with punched sections with mounting
flanges and support strips. Defective assem-
blies are quickly and easily replaced
Additional mounting levels.
Partial mounting plates are fastened directly onto
the vertical enclosure sections via the inner mount-
ing level using the assembly parts supplied loose.
In this mounting position (in both the width and
the depth) they form one level with TS punched
sections with mounting flanges 17 x 73 mm and
TS support strips for the inner mounting level.
Material:
Sheet steel, 2.5 mm
Surface finish:
Zinc-plated
Supply includes:
Assembly parts.
Accessories:
TS punched section with mounting flange
17 x 73 mm for the outer mounting level,
see page 459.
TS support strip, see page 462.
Hinge attachment, see page 449.
Self-tapping screws, SZ 2487.000,
see page 478.
When installing around corners due to collision
between the assembly components
At least 75 mm (adjustable on a 25 mm pitch
pattern).
Maximum space utilisation
1 mm (adjustable on a 25 mm pitch pattern).
Partial installation
Partial utilisation of the enclosure depth or
width is also possible. In this example, using a
PS punched section without mounting flange
23 x 73 mm, see page 464.
Set forward installation position
Quickly and easily achieved wtih four TS punched
sections with mounting flanges 17 x 73 mm for the
outer mounting level, see page 459.
Continuously flush
In bayed enclosures, the partial mounting plate is
in the rearmost position flush with the standard
mounting plate. This facilitates continuous com-
ponent mounting.
For installation in
Size
mm
Packs
of
Model No. TS Enclosure width mm Enclosure depth (side) mm
400 600 800 1000 1200 400 500 600 800
500 x 300 1 8614.640
500 x 400 1 8614.650
500 x 500 1 8614.660
500 x 700 1 8614.680
500 x 775 1 8614.675
1)

700 x 300 1 8614.840
700 x 400 1 8614.850
700 x 700 1 8614.880
900 x 300 1 8614.040
900 x 400 1 8614.050
900 x 500 1 8614.060
1100 x 300 1 8614.240
1100 x 400 1 8614.250
1100 x 500 1 8614.260
1)
Also suitable for installing in
PC enclosures based on TS behind the lower front door
IW enclosures, height 900 and 1000 mm
1
2
1
2
Mounting plates
Hinge attachment
for partial mounting plate TS
Material:
Steel
Surface finish:
Zinc-plated
Supply includes:
Assembly parts.
Also required:
Depending on the installation position
Installation kit for swing frame, small,
for enclosure width
600 mm, Model No. SR 2377.860,
800 mm, Model No. SR 2377.880,
see page 543.
23 x 73 mm according to the enclosure depth,
see page 464.
Support brackets TS 8800.330,
see page 473.
Side installation:
In conjunction with hinge, for side panel,
see page 387, for an enclosure depth of 600 or
800 mm, side installation is identical to installation
parallel to the front.
1
1
2
1
1
2
In the highest or lowest position
Set back At the front
Examples
1
1
1
1
2
2
2
2
1
1
In a central position
Set back At the front
Side installation
1 set 8614.100
1
2
for ES, CS Basic and modular enclosures
For additional mounting levels.
Material:
Sheet steel, 2.5 mm
Surface finish:
Zinc-plated
Supply includes:
Assembly parts.
Accessories:
23 x 73 mm,
see page 464.
see page 478.
For
enclosure width
mm
Width x height
mm
Packs
of
Model No.
PS
600 492 x 373 2 4131.700
600 492 x 573 2 4132.700
800 692 x 573 2 4137.700
Mounting plates
Partial mounting plates,
locatable into rails
for TP
For installation in:
Console and desk unit on the interior installa-
tion system rails
Punched sections with mounting flanges or
support strips fitted to the side of the pedestal
in the depth
Other enclosures mounted on rails with 25 mm
pitch pattern punchings
For easy mounting on pre-fitted assembly screws.
Bayable by screw-fastening at the sides.
Material:
Sheet steel
Surface finish:
Zinc-plated
Supply includes:
Assembly parts.
Width
mm
Height
mm
Packs of Model No. TP
200 437 1 6730.310
500 437 1 6730.330
700 437 1 6730.340
For console/desk unit
Width mm
Max. partial mounting plate
installation
600 1 x TP 6730.330
800 1 x TP 6730.340
1200
2 x TP 6730.310
1 x TP 6730.340
1600 3 x TP 6730.330
200/500/700
150/450/650

6
.
5

6
.
5

1
0
4
2
5
6.5
6.5
1
0
4
3
7
4
2
5
3
5
0
1
1
From width
500 mm
1
Support rail, locatable
for TS, CM, PC, TP
To fit:
Internal mounting behind the mounting com-
partment, small, of the PC enclosure,
Mounting on the vertical TS enclosure section,
Mounting in CM and TP on the interior installa-
tion rail.
Integral 25 mm pitch pattern of holes to accom-
modate:
Mounting plate, small
via support brackets PS as a second mounting
level, if due to an installed:
Mounting plate infill
Cable duct, vertical
no punched sections or other assemblies can be
mounted in the depth.
Static load: max. 15 kg.
Material:
Sheet steel, 2.0 mm
Surface finish:
Zinc-plated
Supply includes:
Assembly parts.
Accessories:
see page 464.
1 set 8612.200
5
0
3
2

7
1
1
4
4.5
7
5
2
(6 x 25 = 150)
204
5
0
16
1
4
37.5
Mounting plate, small
For external mounting on:
Support rail TS, locatable, depth-adjustable on
a 25 mm pitch pattern,
Punched sections with mounting flanges,
attached to the outer mounting level.
Material:
Sheet steel, 1.5 mm
Surface finish:
Zinc-plated
Supply includes:
Assembly parts.
Accessories:
see page 459.
see page 478.
Enclosure width
mm
600 1 8612.600

6
4.5
1
.
5
1
1
4
3
0
5
8
5
0
250 250
557 (757)
Mounting plates
Mounting plate
for TS, 400 mm wide
Depth-adjustable on a 25 mm pitch pattern.
Material:
Sheet steel, 3 mm
Surface finish:
Zinc-plated
Supply includes:
Assembly parts.
Accessories:
TS 18 x 38 mm punched rail, used as mounting
plate slide rail, see page 462.
TS width divider, for installation in wider enclo-
sures, see page 376.
For enclosure height mm Model No. TS
1800 8614.180
2000 8614.200
299
23
1
6
9
6
/
1
8
9
6
2
4
.
5
4
8
7
3
17
42
23 23
Mounting plates
for CS Toptec, Basic and modular enclosures
For the configuration of mounting levels.
The mounting plates are depth-adjustable on a
25 mm pitch pattern.
Material:
Aluminium, 3 mm
Supply includes:
Assembly parts.
Note:
For an enclosure width of 1200 mm,
partial installation with one or two 600 mm wide
mounting plates is possible.
F
23
G
2
4
.
5
4
8
7
3
17
42
23 23
For enclosure
F G Model No. CS
Width mm Height mm
600 800 499 696 9765.090
600 1200 499 1096 9765.092
800 800 699 696 9765.097
800 1200 699 1096 9765.095
800 1600 699 1496 9765.096
1200 1200 1099 1096 9765.191
Rail systems
1
AE installation examples with TS system rails
Rails for interior installation AE (preparing for installation)
For enclosure depth mm
Packs
of
210 250 300 350 Page
Model No. SZ 4 2373.210 2373.250 2373.300 2373.350 459
Interior installation in the width and height
TS punched
section with
mounting flange,
17 x 73 mm
AE from enclosure
width/height mm
A
1)

mm
Packs
of
Model No. TS
380 225 4 8612.130 8612.130 8612.130 8612.130
459
500
325 4 8612.140 8612.140 8612.140 8612.140
375 4 8612.040 8612.040 8612.040 8612.040
600
425 4 8612.150 8612.150 8612.150 8612.150
475 4 8612.050 8612.050 8612.050 8612.050
760
525 4 8612.160 8612.160 8612.160 8612.160
575 4 8612.060 8612.060 8612.060 8612.060
1000
725 4 8612.180 8612.180 8612.180
775 4 8612.080 8612.080 8612.080
875 4 8612.090 8612.090 8612.090
1200
925 4 8612.100
975 4 8612.000
1400
1125 4 8612.120
1175 4 8612.020
TS support strips 400 325 20 4694.000 4694.000 4694.000 4694.000
462
500 425 20 4695.000 4695.000 4695.000 4695.000
600 525 20 4696.000 4696.000 4696.000 4696.000
800 725 20 4697.000 4697.000 4697.000 4697.000
1)
A = Rail mounting distance
1
2
3
A
1
X
1
2
2
3
3
A
X
Rail systems
1
2
8
7
6
CM installation examples with TS system rails
Rails for interior installation (preparing for installation)
For enclosure width/height mm
Packs
of
600 800 1000 1200 1400 Page
Model No. CM 4 5001.050 5001.051 5001.052 5001.053 5001.054 459
Base configuration rail (preparing for installation)
For enclosure depth
Packs
of
300 400
Model No. CM 2 5001.371 5001.370 461
Installation in the width
Packs
of
Model No. TS
For enclosure width mm 600 800 1000 1200 1400
A
1)
mm 575 775 975 1175
17 x 73 mm
4 8612.060 8612.080 8612.000 8612.020 459
TS support strips 20 8800.130 4579.000 462
Support rail
slotted 4 4396.000 4398.000 466
unslotted 4 4396.500 4398.500 466
System support rails 2 4361.000 4362.000 4347.000 4363.000 466
C rails 30/15 6 4944.000 4945.000 4946.000 4947.000 465
Cable clamp rail 2 4191.000 4192.000 4336.000 4196.000 527
Installation in the height (individual installation e.g. with)
17 x 73 mm
see page 459
TS support strips see page 462
Installation in the depth
For enclosure
depth mm
A
1)

mm
Packs
of
Model No. TS/PS
TS punched section
with mounting
flange, 17 x 73 mm
300 225 4 8612.130 8612.130 8612.130 8612.130 8612.130
459
400 325 4 8612.140 8612.140 8612.140 8612.140 8612.140
TS support strips 400 325 20 4694.000 4694.000 4694.000 4694.000 4694.000 462
TS punched rail
18 x 38 mm
400 325 4 8612.240 8612.240 8612.240 8612.240 8612.240 462
PS punched rail,
23 x 23 mm
400 275 12 4169.000 4169.000 4169.000 4169.000 4169.000 463
With mounting bracket TS (2 per rail) 24 8800.370 8800.370 8800.370 8800.370 8800.370 472
1)
1
2
3
4
5
6
7
8
9
10
11
12
X
A
5
11
2
10
10
12
9
1
1
3
4
A
X
Rail systems
1
TP pedestal
Installation examples with TS system rails
For enclosure width mm
Packs
of
600 800 1200 1600 Page
For enclosure height mm 675 675 675 675
Model No. CM 4 5001.050 5001.050 5001.050 5001.050 459
Installation in the width
Packs
of
Model No. TS
For enclosure width mm 600 800 1200 1600
A
1)
mm 575 775 1175 1575
17 x 73 mm
4 8612.060 8612.080 8612.020 459
TS support strips 20 8800.130 4579.000 462
Installation in the height (individual installation e.g. with)
TS support strips see page 462
TS punched rail 18 x 38 mm see page 462
Installation in the depth
For
enclosure
depth mm
A
1)

mm
Packs
of
Model No. TS
TS punched section
with mounting
flange, 17 x 73 mm
400 325 4 8612.140 8612.140 8612.140 8612.140
459
500 425 4 8612.150 8612.150 8612.150 8612.150
TS support strips
400 325 20 4694.000 4694.000 4694.000 4694.000
462
500 425 20 4695.000 4695.000 4695.000 4695.000
TS punched rail
18 x 38 mm
400 325 4 8612.240 8612.240 8612.240 8612.240
462
500 425 4 8612.250 8612.250 8612.250 8612.250
PS punched rail
23 x 23 mm
400 325 12 4169.000 4169.000 4169.000 4169.000
463
500 425 12 4170.000 4170.000 4170.000 4170.000
With mounting bracket TS (2 per rail) 24 8800.370 8800.370 8800.370 8800.370 472
1)
1
2
3
4
5
6
7
2
1
7
6
X
1
4
5
3
4
A
A
X
Rail systems
1
TP pedestal
Installation examples with TS system rails
Packs
of
600 800 1200 1600 Page
Model No. CM 4 5001.050 5001.051 5001.053 459
Installation in the height
A
1)

mm
Packs
of
Model No. TS
For enclosure width mm 600 800 1200 1600
TS punched section with mounting flange, 17 x 73 mm
For cover 375 4 8612.040 8612.040 8612.040 8612.040 459
For enclosure 425 4 8612.150 8612.150 8612.150 8612.150 459
TS support strips
For cover 375 4 4309.000 4309.000 4309.000 4309.000 462
For enclosure 425 4 4695.000 4695.000 4695.000 4695.000 462
TS punched rail 18 x 38 mm
For enclosure 425 4 8612.250 8612.250 8612.250 8612.250 462
1)
1
2
3
4
1
1
X
2
3
4
A
A
X
Console
Rail systems
TS installation examples with TS system rails
Installation in the roof
and base frame
in the width/depth
Installation between vertical sections
in the width/depth
Internal level External level
A
A
A
A
A
A
A
For
enclosure width/depth
mm
Packs
of
A
1)

mm
Model No. TS
A
1)

mm
Model No. TS
A
1)

mm
Model No. TS Page
300 4 275 8612.030 225 8612.130
459
400 4 375 8612.040 325 8612.140
500 4 475 8612.050 425 8612.150
600 4 575 8612.060 525 8612.160
800 4 775 8612.080 725 8612.180
1000 4 975 8612.000 925 8612.100
1200 4 1175 8612.020 1125 8612.120
1)
A
For
mm
Packs
of
A
1)

mm
Model No. TS
A
1)

mm
Model No. TS
A
1)

mm
Model No. TS Page
500 4 425 8612.550
460
600 4 525 8612.560
800 4 725 8612.580
1000 4 925 8612.500
1200 4 1125 8612.520
1)
A
A
TS punched section without mounting flanges, 45 x 88 mm
For
mm
Packs
of
A
1)

mm
Model No. TS
A
1)

mm
Model No. TS
A
1)

mm
Model No. TS Page
500 2 375 8612.650 375 8612.650
461 600 2 475 8612.660 475 8612.660
800 2 675 8612.680 675 8612.680
1)
Rail systems
and base frame
in the width/depth
in the width/depth
A
A
A
A
A
A
TS punched rail 25 x 38 mm (with snap-on nut M8)
For
mm
Packs
of
A
1)

mm
Model No. TS
A
1)

mm
Model No. TS
A
1)

mm
Model No. TS Page
500 2 435 8612.750
461 600 2 535 8612.760
800 2 735 8612.780
1)
A
For
mm
Packs
of
A
1)

mm
Model No. TS
A
1)

mm
Model No. TS
A
1)

mm
Model No. TS Page
400 2 335 8612.240 335 8612.240
462
500 2 435 8612.250 435 8612.250
600 2 535 8612.260 535 8612.260
800 2 735 8612.280 735 8612.280
1)
Two TS punched rails 18 x 38 mm are included in the supply of enclosures with a mounting plate. After installing the
mounting plate, the TS punched rail may be inserted, as shown here.
A
A
TS support strips
For
mm
Packs
of
A
1)

mm
Model No. TS
A
1)

mm
Model No. TS
A
1)

mm
Model No. TS Page
400 20 325 4694.000
462
500 20 425 4695.000
600 20 525 4696.000
800 20 725 4697.000
400 20 375 4309.000
500 20 475 4596.000
600 20 575 8800.130
20 675 4598.000
800 20 775 4579.000
20 875 4599.000
1)
Alternatively, the TS support strip for the inner mounting level may also be used for mounting on the door.
A
PS punched rails 23 x 23 mm
(for installation options, see support bracket TS/PS, angle bracket, mounting bracket)
For
mm
Packs
of
A
1)

mm
Model No. PS
A
1)

mm
Model No. PS
A
1)

mm
Model No. PS Page
400 12 275 4169.000 275 4169.000
463
500 12 375 4170.000 375 4170.000
600 12 475 4171.000 475 4171.000
800 12 675 4172.000 675 4172.000
1000 12 875 4173.000 875 4173.000
1200 6 1075 4174.000 1075 4174.000
1400 6 1275 4393.000 1275 4393.000
1600 6 1475 4175.000 1475 4175.000
1800 6 1675 4176.000 1675 4176.000
2000 6 1875 4177.000 1875 4177.000
2200 6 2075 4178.000 2075 4178.000
1)
Rail systems
and base frame
in the width/depth
in the width/depth
A
A
A
A
A
A
PS punched section without mounting flange 23 x 73 mm (installation option with support bracket TS)
For
mm
Packs
of
A
1)

mm
Model No. PS
A
1)

mm
Model No. PS
A
1)

mm
Model No. PS Page
400 4 275 4374.000 275 4374.000
464
500 4 375 4375.000 375 4375.000
600 4 475 4376.000 475 4376.000
800 4 675 4377.000 675 4377.000
1000 4 875 4382.000 875 4382.000
1200 4 1075 4378.000 1075 4378.000
1800 4 1675 4379.000 1675 4379.000
2000 4 1875 4380.000 1875 4380.000
2200 4 2075 4381.000 2075 4381.000
1)
A
A
PS punched section with mounting flange 23 x 73 mm
(installation options with TS adaptor rail when mounting on the vertical TS enclosure section)
For
mm
Packs
of
A
1)

mm
Model No. PS
A
1)

mm
Model No. PS
A
1)

mm
Model No. PS Page
400 4 335 8800.640 8800.640
464
500 4 435 8800.650 8800.650
600 4 535 4364.000 4364.000
800 4 735 4365.000 4365.000
1000 4 935 4373.000 4373.000
1200 4 1135 4367.000 4367.000
1)
A
Support rails, slotted
For
mm
Packs
of
A
1)

mm
Model No. PS
A
1)

mm
Model No. PS
A
1)

mm
Model No. PS Page
400 4 335 4394.000
466
500 2 435 4395.000
600 2 535 4396.000
800 2 735 4398.000
Support rails, unslotted
400 4 335
466
500 2 435
600 2 535 4396.500
800 2 735 4398.500
1)
Alternatively, the support rail (slotted and unslotted) can also be fitted with snap-on nut M8, adaptor rail or
TS punched rail 25 x 38 mm on the vertical TS enclosure section.
Rail systems
for AE
For mounting in the enclosure, no machining
required. Suitable for all-round mounting on the
sides, base and roof areas.
Variable with 2 rows of system punchings,
creates additional mounting space e.g. for:
Enclosure lights
Door-operated switch
Door stay
Cable conduit holder
Material:
Sheet steel
Surface finish:
Zinc-plated
Note:
Other mounting options:
Mounting plates, locatable,
TS 8612.400, see page 469.
Mounting plates, screw-fastening, large,
TS 8612.410, see page 469.
Mounting plates, screw-fastening, small,
PS 4532.000, see page 470.
Mounting brackets,
PS 4597.000, see page 470.
Configuration examples:
See page 452.
For enclosure depth
mm
210 4 2373.210
250 4 2373.250
300 4 2373.300
350 4 2373.350
for CM, TP
For mounting on the existing threaded bolts.
With TS system punchings on three sides.
Material:
Sheet steel
Surface finish:
Zinc-plated
Supply includes:
Assembly parts.
See page 453.
Width
mm
Height
mm
Packs
of
Model No.
CM
CM TP
1)
CM TP
2)

600 600 675 4 5001.050
800 800 800 4 5001.051
1000 1000 4 5001.052
1200 1200 1200 4 5001.053
1400 4 5001.054
1)
Only with TP console and desk unit
(cover or rear panel/base).
2)
Only with TP pedestal.
Variable, with 5 rows of holes for universal skele-
ton structures or partial assembly. Simply locate
into the TS punchings and secure.
On the vertical TS enclosure section
On the outer mounting level, all-round,
at the same height
On the inner mounting level, all-round,
height-offset
In CM and TP via rail for interior installation
In the depth, for outer mounting level
In the width, for inner mounting level
Material:
Sheet steel
Surface finish:
Zinc-plated
Supply includes:
Assembly screws.
Also required:
For installation in CM, TP:
Rail for interior installation, see page 459.
Accessories:
Screws, see page 478.
see page 530.
For the outer mounting level
For the inner mounting level
See from page 453.
For
mm
300 4 8612.130
400 4 8612.140
500 4 8612.150
600 4 8612.160
800 4 8612.180
1000 4 8612.100
1200 4 8612.120
For
mm
300 4 8612.030
400 4 8612.040
500 4 8612.050
600 4 8612.060
800 4 8612.080
1000 4 8612.000
1200 4 8612.020
Rail systems
Attachment TS
for TS punched section with mounting flange,
17 x 73 mm
Benefits:
For attaching the TS punched section with
mounting flange where access to installed
equipment, such as mounting plates, is
blocked by the screw fastening.
May also be screw-fastened onto the punched
section with mounting flange or enclosure frame
and used as a support for contact hazard pro-
tection covers or master switch trim panels.
Material:
Sheet steel
Surface finish:
Zinc-plated
12 8612.010
Depth-variable for mounting frames
for DK-TS, TE
For designing flexible interior installation, and/or
to accommodate additional built-in components.
The punched sections with mounting flanges may
be located in the enclosure depth between two
mounting frames. An additional screw fastening
secures the unit. The depth variability of the rails
facilitates flexible adaptation of their length to the
existing attachment distance between the two
482.6 mm (19) mounting frames. An additional
punched section centre piece may be slid flexibly
along the rail in the depth and secured to slots.
This facilitates flexible attachment at any point
between the mounting frames in the enclosure
depth.
Material:
Sheet steel
Surface finish:
Zinc-plated
Supply includes:
2 variable punched sections with mounting
flanges
One sliding centre part each
Assembly parts
Length
mm
Packs of Model No. HP
300 470
1) 2)
2 7000.676
530 700
1)
2 7000.678
1)
Distance between 482.6 mm (19) levels =
length + 120 mm
2)
L < 420 mm, without centre piece
The alternative to the TS punched section with
mounting flange 17 x 73 mm, see page 459,
with punchings for captive nuts/threaded blocks
instead of the slotted holes top and bottom.
Simply locate and secure.
Material:
Sheet steel
Surface finish:
Zinc-plated
Supply includes:
Assembly screws.
Accessories:
Screws,
see page 478.
Threaded blocks, captive nuts,
see page 477.
See page 456.
For
mm
500 4 8612.550
600 4 8612.560
800 4 8612.580
1000 4 8612.500
1200 4 8612.520
Rail systems
TS punched section without
mounting flanges, 45 x 88 mm
Heavy top-mounted equipment mounted directly
on the internal surfaces (e.g. roof) is supported.
Mounted on the side or rear, the enclosure can
then be screw-fastened securely to the machine.
The twin profile with 11 rows of holes offers
numerous additional opportunities for interior
installation.
On the vertical and horizontal TS enclosure
section
Material:
Sheet steel
Surface finish:
Zinc-plated
Supply includes:
Assembly parts.
Accessories:
Screws,
see page 478.
Threaded blocks, captive nuts,
see page 477.
See page 456.
For
mm
500 2 8612.650
600 2 8612.660
800 2 8612.680
For heavy installations, with attachment holes.
With 9 mm round holes on a 25 mm pitch pattern
on all sides, for mounting:
Support rails, see page 466
System support rails, see page 466
C rails 30/15, see page 465
Cable clamp rails (right angle section),
see page 527
Own assemblies.
Material:
Sheet steel, 3.0 mm
Surface finish:
Zinc-plated
Supply includes:
Assembly screws.
Also required:
see page 471.
Note:
In conjunction with the snap-on nut, particularly
well-suited for dynamic connections.
See page 457.
For
mm
500 2 8612.750
600 2 8612.760
800 2 8612.780
Base configuration rail
for CM
For mounting in the enclosure depth, on the
existing threaded bolts, no machining required.
TS system punchings on 2 sides.
Creates additional installation options.
Material:
Sheet steel
Surface finish:
Zinc-plated
Supply includes:
Assembly parts.
For enclosure depth
mm
400 2 5001.370
300 2 5001.371
Rail systems
Simply locate and secure with a screw.
The location system makes assembly and dis-
mantling easier. It only needs to be secured on
one side, but may be secured on both sides if
required.
On the outer mounting level
On the horizontal TS enclosure section
On base configuration rail for CM
Material:
Sheet steel
Surface finish:
Zinc-plated
Supply includes:
Assembly screws.
Note:
In enclosures with a mounting plate, 2 punched
rails are already included with the supply.
Accessories:
Screws,
see page 478.
see page 530.
Cable clamps,
see page 529.
See from page 453.
For
mm
400 4 8612.240
500 4 8612.250
600 4 8612.260
800 4 8612.280
TS support strips
On the vertical and horizontal TS enclosure
section
On the outer mounting level, all-round,
at the same height
On the inner mounting level, all-round,
height-offset
On the tubular door frame TS, ES
On the perforated door strip CM, TP
On the ES system punchings, in the enclosure
depth
Material:
Sheet steel
Surface finish:
Zinc-plated
Supply includes:
Assembly screws.
Accessories:
Screws,
see page 478.
see page 530.
See from page 452.
For
mm
Length
mm
Packs
of
Model No. TS
400 340 20 4694.000
500 440 20 4695.000
600 540 20 4696.000
800 740 20 4697.000
For the inner mounting level and for mounting on doors
For enclosure width/depth
mm
For door width
mm
Length
mm
400 290 20 4594.000
400 500 390 20 4309.000
500 600 490 20 4596.000
600 590 20 8800.130
800 690 20 4598.000
800 900 790 20 4579.000
1000 890 20 4599.000
Rail systems
TS assembly block
Installation in the vertical TS enclosure sections
for mounting PS-compatible individual compo-
nents.
Material:
Die-cast zinc
Supply includes:
Assembly screws.
Possible
alternative:
Snap-on nut,
see page 471.
4 8800.310
Adaptor rail
for PS compatibility
Installation in the vertical TS enclosure sections
(across the entire enclosure height or in sub-sec-
tions) to create compatibility with:
PS punched rail, 23 x 23 mm
23 x 73 mm
PS punched section with mounting flange
23 x 73 mm
Material:
Sheet steel
Surface finish:
Zinc-plated
Supply includes:
Assembly screws.
Accessories:
Screws,
see page 478.
Possible
alternative:
Snap-on nut,
see page 471.
For
enclosure height
mm
1800 4 8800.380
2000 4 8800.300
2200 4 8800.320
PS punched rails 23 x 23 mm
for TS, ES
On the vertical enclosure section
Directly via support brackets TS
Via adaptor rail for PS compatibility in
conjunction with angle brackets, mounting
brackets or support brackets PS
On the horizontal enclosure section
Directly via angle brackets, mounting
brackets or support brackets PS
Material:
Sheet steel
Surface finish:
Zinc-plated
Also required:
U nuts, see page 477.
Mounting brackets TS/PS,
see page 472 or
Angle brackets, support brackets TS/PS,
see page 473.
Accessories:
Cable attachment, see page 530.
see page 530.
See from page 453.
Length mm For WHD mm Packs of Model No. PS
295 400 12 4169.000
395 500 12 4170.000
495 600 12 4171.000
695 800 12 4172.000
895 1000 12 4173.000
1095 1200 6 4174.000
1295 1400 6 4393.000
1495 1600 6 4175.000
1695 1800 6 4176.000
1895 2000 6 4177.000
2095 2200 6 4178.000
Rail systems
PS punched section without
for TS, ES
On the vertical enclosure section
Directly via support brackets TS
Via adaptor rail for PS compatibility in
conjunction with support brackets PS
On the horizontal enclosure section
Directly via support brackets PS
Material:
Sheet steel
Surface finish:
Zinc-plated
Also required:
Support brackets PS/TS,
see page 473.
Accessories:
see page 530.
U nuts, see page 477.
See page 458.
Length mm For WHD mm Packs of Model No. PS
295 400 4 4374.000
395 500 4 4375.000
495 600 4 4376.000
695 800 4 4377.000
895 1000 4 4382.000
1095 1200 4 4378.000
1695 1800 4 4379.000
1895 2000 4 4380.000
2095 2200 4 4381.000
PS punched section with
mounting flange 23 x 73 mm
for TS, ES
Variable, with 5 rows of holes for universal skele-
ton structures or partial assembly. Simply locate
into the system punchings and secure.
Via adaptor rail for PS compatibility
depth
Material:
Sheet steel
Surface finish:
Zinc-plated
Supply includes:
Assembly screws.
Also required:
Adaptor rail for PS compatibility
(when mounting on the vertical enclosure section),
see page 463.
See page 458.
Installation in
TS
mm
400 4 8800.640
500 4 8800.650
600 4 4364.000
800 4 4365.000
1000 4 4373.000
1200 4 4367.000
Installation in
enclosure depth ES,
TP universal console,
mm
400 4 4369.000
500 4 4370.000
600 4 4371.000
800 4 4372.000
Rail systems
2 1
C rails 30/15
to EN 60 715 for TS, ES
Via snap-on nut TS 8800.808 (Fig. 1)
On the horizontal TS enclosure section (Fig. 2)
On the ES system punchings
Material:
Sheet steel
Surface finish:
Zinc-plated
Accessories:
Cable clamps,
see page 529.
Support bracket or spacer,
see page 474.
Quick-assembly block,
see page 474.
see page 471.
Adaptor rail,
see page 463.
Possible
alternative:
Rail for EMC shielding bracket and strain relief,
see page 498.
For
mm
Length
mm
Packs
of
Model No. PS
500 455 6 4943.000
600 555 6 4944.000
800 755 6 4945.000
1000 955 6 4946.000
1200 1155 6 4947.000
C rails
for DK-TS, CS Toptec
For direct mounting on the vertical enclosure
section. Thanks to the universally designed
attachment piece, the C rails may optionally be
attached to the inner or outer level of the TS 8
frame.
Material:
Sheet steel
Surface finish:
Zinc-plated
Supply includes:
Assembly parts.
Accessories:
Cable clamps,
see page 529.
For
mm
Length
mm
Packs
of
Model No. DK
400 298 4 7828.040
500 398 4 7828.050
600 498 4 7828.060
800 698 4 7828.080
1000 898 4 7828.100
1200 1098 4 7828.120
C rails
for DK-TS
On the horizontal enclosure sections
Material:
Sheet steel
Surface finish:
Zinc-plated
Supply includes:
Assembly parts.
Also required:
Adaptor rail for PS compatibility
(when mounting on the vertical enclosure section),
see page 463.
Accessories:
Cable clamps,
see page 529.
For
mm
Length
mm
Packs
of
Model No. DK
400 290 6 7091.000
600 490 6 7095.000
800 690 6 7096.000
1000 890 6 7100.000
1200 1090 6 7102.000
Rail systems
2 1
System support rails
For heavy installed equipment such as transform-
ers. T-head screw and slot in the support rail
for any mounting position.
Offset in the height, via TS punched rail
25 x 38 mm (Fig. 2)
in width
In the depth (without mounting plate)
On the ES system punchings
In the enclosure depth
Material:
Sheet steel
Surface finish:
Zinc-plated
Supply includes:
2 system support rails (45 x 25 mm)
4 T-head screws M12 x 60 mm
Assembly parts
Accessories:
Width divider e.g. for the installation of
2 system support rails (for 600 mm width)
in 1200 mm wide enclosures,
see page 376.
see page 471.
Adaptor rail,
see page 463.
see page 461.
For
enclosure width
mm
600 2 4361.000
800 2 4362.000
1000 2 4347.000
1200 2 4363.000
2 1
Support rails
for TS, ES, CM
For heavy installations. Particularly suitable for the
installation of base isolators.
Offset in the height, via TS punched rail
25 x 38 mm (Fig. 2)
in width
in depth
depth
Material:
Sheet steel
Surface finish:
Zinc-plated
Supply includes:
Assembly parts.
Accessories:
see page 471.
Adaptor rail,
see page 463.
see page 461.
See from page 453.
For
enclosure
width/depth
mm
Packs
of
Model No. PS Model No. TS
slotted unslotted
400 4 4394.000
500 4 4395.000
600 4 4396.000 4396.500
800 4 4398.000 4398.500
Support rail 65 x 42 mm
for TS, ES
Benefits:
For heavy assemblies up to 5000 N per
support rail.
10000 N per enclosure
Material:
Steel
Surface finish:
Zinc-plated
Supply includes:
Assembly parts.
For
enclosure width
mm
600 2 8612.960
800 2 8612.980
28.5
20
535/735
575/775
Rail systems
Support rails TS 35/15
to EN 60 715 for TS, ES
Mounting on the TS vertical section via
see page 471
Assembly block see page 463 or
Adaptor rail, see page 463.
For
enclosure
width/depth
mm
Support rails
length
mm
Packs
of
Model No.
PS
500 455 6 4933.000
600 555 6 4934.000
800 755 6 4935.000
1200 1155 6 4937.000
Support rails TS 35/7.5
and TS 35/15
to EN 60 715 for KL, KL-HD, AE
Length sized to the enclosure width
For
enclosure
width
mm
Support
rails
length
mm
Design
Packs
of
Model No.
SZ
150 137
TS 35/7.5
10 2314.000
200 187 10 2315.000
300 287 10 2316.000
400 387 10 2317.000
500 487
TS 35/15
10 2318.000
600 587 10 2319.000
Support rails
to EN 60 715
Standard length 2 m
Design Length
Packs
of
Model No.
SZ
TS 35/15 2 m 6 2313.150
TS 35/7.5 2 m 6 2313.750
Mounting clip
for support rails
For fast, secure attachment of:
Cable ducts
Mounting plates
Mounting angles
on support rail TS 35/7.5 and TS 35/15 to
EN 60 715.
Simply pre-assemble the mounting clip on the
part to be installed, then snap into position on the
support rail.
30 2309.000
C rails
for EL
For infinite adjustment of the mounting angles in
the depth.
Material:
Sheet steel
Supply includes:
Assembly parts.
Accessories:
Cable clamps,
see page 529.
For
centre part depth
mm
Packs of Model No. EL
216 4 2238.000
1)

316 4 2239.000
416 4 2237.000
1)
Rail systems
for TS
Mounting angle with TS pitch on three sides.
Suitable for
building an auxiliary construction for dividing
the busbar space,
individual use as mounting frame for low and
medium loads,
fastening to the internal or external mounting
level of the TS 8 enclosure.
Material:
Sheet steel, 1.5 mm
Surface finish:
Zinc-plated
Also required:
Frame connector piece,
see page 475.
T-connector piece,
see page 475.
Corner connector,
see page 475.
For horizontal
busbar space separation
Packs
of
Model No.
SV
For functional
space depth
mm
Length
mm
425 62.5 12 9673.915
600 137.5 12 9673.920
For vertical separation
with busbar system
in the top rear section
Packs
of
Model No.
SV
For functional
space height
mm
Length
mm
450 500
1)
487.5 12 9673.953
650 800
1)
787.5 12 9673.983
1)
Rails should be shortened where necessary.
For vertical separation
with busbar system
in the bottom rear section
Packs
of
Model No.
SV
For functional
space height
mm
Length
mm
350 412.5 12 9673.951
400 462.5 12 9673.960
450 512.5 12 9673.961
550 650
1)
712.5 12 9673.981
700 800
1)
862.5 12 9673.995
1)
Rails should be shortened where necessary.
For external mounting level
Packs
of
Model No.
SV
For enclosure
width/depth
mm
Length
mm
400 262.5 12 9673.940
500 362.5 12 9673.950
600 462.5 12 9673.960
For internal mounting level
Packs
of
Model No.
SV
For enclosure
width/depth
mm
Length
mm
400 312.5 12 9673.941
500 412.5 12 9673.951
600 512.5 12 9673.961
800 712.5 12 9673.981
Rail systems
C rails
for cable chamber enclosures
For attaching cables and lines and for mounting
stacking insulators.
Material:
Sheet steel
Supply includes:
4 C rails
8 brackets
Assembly parts
For TS enclosures
width/depth
mm
Length (L)
mm
Packs
of
Model No. SV
600 600 4 9660.210
800 800 4 9660.220
L
Punched sections
for coupling section
For assembling a Maxi-PLS or Flat-PLS busbar
system directly beneath or above the circuit-
breaker. This punched section with mounting
flange may be used without conflict in conjunc-
tion with the compartment space side panel
modules. It is attached to the outer level of the
TS 8 enclosure system, but thanks to the PS
punchings allows a mounting level as in the roof
or base frame, thereby facilitating the use of bus-
bar system attachment for the roof/base section.
Material:
Sheet steel
Surface finish:
Zinc-plated
Supply includes:
Assembly parts.
For TS enclosures
width/depth
mm
Packs
of
Model No.
SV
600 2 9674.056
800 2 9674.058
Mounting plates
Locatable
on
the vertical TS enclosure section
17 x 73 mm
at the rear on the TE 482.6 mm (19) mounting
frame
Material:
Sheet steel
Surface finish:
Zinc-plated
Supply includes:
Assembly screws.
Detailed drawings:
4 8612.400
Mounting plates
Screw-fastened, large
On all enclosures and mounting parts with system
punchings on a 25 mm pitch pattern.
Material:
Sheet steel
Surface finish:
Zinc-plated
Supply includes:
Assembly screws.
Detailed drawings:
4 8612.410
Rail systems
Mounting plates
Screw-fastened, small
Material:
Sheet steel
Surface finish:
Zinc-plated
Supply includes:
Assembly screws.
Detailed drawings:
4 4532.000
Mounting plate TS
with integral top-hat rail
For direct snap-mounting of components such as
speed control, enclosure internal thermostat and
hygrostat.
Material:
Sheet steel
Surface finish:
Zinc-plated
Supply includes:
Mounting plate (mounting accessories included).
1 7526.964
Mounting bracket
May be screw-fastened onto all enclosures and
mounting parts with system punchings on a
Material:
Sheet steel
Surface finish:
Zinc-plated
Supply includes:
Assembly screws.
Accessories:
Screws,
see page 478.
see page 530.
Detailed drawings:
4 4597.000
Mounting bracket
For installing punched sections with mounting
flanges and support strips in:
Comfort Panel horizontal/vertical from 74 mm
installation depth
or for installing in:
Optipanel from an installation depth of 100 mm
Material:
Sheet steel
Surface finish:
Zinc-plated
Supply includes:
Assembly parts.
Detailed drawings:
4 6205.100

Comfort Panel
Page
Front plate width 482.6 mm (19)
Punched sections with mounting
flanges
Horizontal
8612.150 459
Vertical
Support strips
Horizontal
4695.000 462
Vertical
Assembly components
1 2
3 4
5
Snap-on nut TS
Metric thread for vertical TS enclosure section.
To install, insert into slot and clip into position.
The snap-on nut is then secure. By tightening the
screw, it is securely tightened against the section,
and potential equalisation is automatically cre-
ated.
with metric thread M6 or M8
the alternative to metal screws
particularly well-suited for dynamically loaded
connections.
Material:
Precision-cast stainless steel
Accessories for interior installation
Support rails,
see page 466
Cable clamp rails,
see page 527
C rails 30/15,
see page 465
System support rails,
see page 466
see page 461
Accessories:
Multi-tooth screw M6 x 12 or M8 x 12,
see page 478.
1
2
3
4
5
Thread Packs of Model No. TS
M6 20 8800.806
M8 20 8800.808
Adaptor bracket TS
For external mounting of
System lights
Cable ducts
on the vertical TS enclosure section.
Material:
Sheet steel
Surface finish:
Zinc-plated
Supply includes:
Assembly screws.
6 8800.360
Assembly components
Mounting bracket TS
Offers variable mounting options for the punched
rail 23 x 23 mm, e.g. for supporting external
surfaces or creating an additional internal level.
Material:
Die-cast zinc
Supply includes:
24 screws 5.5 x 13 mm.
Accessories:
U nuts (recommendation: M6),
see page 477.
flush with the outer edge of the enclosure or
flush with the enclosure clearance width.
24 8800.370
1 Support of the external surfaces with two
mounting options:
Without mounting plate (photo)
With mounting plate (drawing)
1
2 Two installation options for the inner mounting
level:
If there is no divider panel fitted. 2
3 With a divider panel fitted, and without or with
a mounting plate in a set forward position.
3
Mounting bracket PS
For variable attachment of punched rail
23 x 23 mm.
Optionally flush with:
Outer enclosure edge or
Enclosure clearance width
On the vertical TS enclosure section via
Adaptor rail for PS compatibility,
see page 463
On enclosures and rails with rectangular
system punching 12.5 x 10.5 mm.
Material:
Die-cast zinc
Supply includes:
1 set =
1 mounitng bracket,
1 screw M6 x 12 mm,
1 cage nut M6.
Also required:
U nuts for punched rails (recommended: M6),
see page 477.
Multi-tooth screws M6 x 12 mm,
see page 478.
24 set 4182.000
Assembly components
Angle bracket PS
For quick attachment of punched rails
23 x 23 mm.
see page 463
Material:
Sheet steel
Surface finish:
Zinc-plated
Supply includes:
1 set =
1 angle bracket, left,
1 angle bracket, right,
2 metal screws 5.5 x 13 mm.
Also required:
see page 477.
see page 478.
12 set 4181.000
Support bracket TS
For the attachment of punched sections without
mounting flange 23 x 73 mm or punched rails
23 x 23 mm.
on a 25 mm pitch pattern
in 2 mm increments.
Material:
Die-cast zinc
Supply includes:
1 set =
1 support bracket,
1 stay,
Also required:
see page 477.
see page 478.
6 set 8800.330
Support bracket PS
For the attachment of punched sections without
mounting flange 23 x 73 mm or punched rails
23 x 23 mm.
Snap-on nut TS 8800.806,
see page 471 or
see page 463
Material:
Die-cast zinc
Supply includes:
1 set =
1 support bracket,
2 countersunk screws,
2 serrated lock washers.
Also required:
see page 477.
see page 478.
Adaptor rail for PS compatibility (when
mounting on the vertical enclosure section),
see page 463.
24 set 4183.000
Assembly components
Bracket/spacer
For fastening C rails, punched rails or cable
clamp rails (angle section). On the sides,
to accommodate square sections or tubes
( 20 mm).
Attachment points with M8 thread.
see page 471, or
see page 463
Material:
Die-cast zinc
Supply includes:
1 set =
1 bracket/spacer,
2 screws M8 x 16 mm,
2 spring lock washers,
2 cage nuts M8,
2 serrated lock washers,
2 metal screws.
Accessories:
Angle piece TS 4134.000,
see page 474.
6 set 4199.000
Quick-assembly block
For a variety of installation options.
see page 471, or
see page 463
Material:
Die-cast zinc
Supply includes:
12 quick-assembly blocks
12 threaded blocks M8
24 screws M8 x 12 mm
24 square nuts M8
12 4133.000
Angle piece
For assembling punched rails and mounting
surfaces with a 45 incline.
see page 471 or
see page 463
Material:
Angle pieces: Die-cast zinc
Insulating pieces: Plastic
Supply includes:
1 set =
1 angle piece,
1 insulating piece,
1 insulating screw,
2 assembly screws,
1 threaded block M6.
12 set 4134.000
Assembly components
Frame connector piece
for TS punched rail 17 x 17 mm
Mounting part with integral M4 threads for attach-
ing the TS punched rail 17 x 17 mm to the hori-
zontal and vertical TS frame section (external
level). The frame adaptor piece can be used as a
self-holding construction aid in the TS pitch and
fastened with a screw to the frame. Can also be
used for fastening other sections with TS pitch.
Material:
Die-cast zinc
Supply includes:
Assembly parts.
24 9673.901
T-connector piece
Mounting piece with integral M4 threaded holes
for attaching the TS punched rail 17 x 17 mm
to horizontal and vertical TS chassis
to TS punched rail 17 x 17 mm
to the vertical TS frame section (internal level).
The T-connector piece can be used as a self-hold-
ing construction aid in the TS pitch and fastened
with a screw to the frame. Can also be used for
fastening other sections with TS pitch.
Material:
Die-cast zinc
Supply includes:
Assembly parts.
24 9673.903
Corner connector
Mounting part with integral M4 threads for con-
necting two TS punched rails 17 x 17 mm at an
angle of 90 across the corner. Required for build-
ing the auxiliary construction for the busbar space
separation.
Material:
Die-cast zinc
Supply includes:
Assembly parts.
10 9673.902
Assembly components
Universal bracket
For installing
Enclosure lights in
Door-operated switches in
Cable conduit holders SZ 2593.000 and
SZ 2591.000 in
Support rails for terminals in
Command panels and command panel
housings with door.
Mounting screws are concealed when the door
is closed. Existing holes for mounting blocks or
hinges may be used with AE.
Material:
Supply includes:
Assembly parts.
6 2373.000
4.2 28
8
45
Rail mounting bracket
For individual rail mounting.
Material:
3
0
M5
7
60
73
35
M6
35
7
81
4
7
60
Rail mounting bracket Packs of Model No. SZ
flat 20 2365.000
inclined 20 2366.000
Mounting block
for AE
As an accessory for additional interior installation,
e.g. mounting of cable ties, PS punched rails,
top hat rails and C rails (e.g. for a second pair of
mounting angles).
Supply includes:
Assembly parts.
20 2574.000
Assembly components
U nuts
For
Punched rail 23 x 23 mm
Punched section without mounting flange,
23 x 73 mm
45 x 88 mm
Punched section with mounting flange,
23 x 73 mm
For mounting punched rails and punched sec-
tions without mounting flanges on angle brackets,
mounting brackets and support brackets, we
recommend U nuts with M6 thread (PS 4179.000).
Accessories:
Multi-tooth screws M6 x 12 mm, (for PS 4179.000),
see page 478.
Thread Packs of Model No. PS
M4 20 4119.000
M5 20 4157.000
M6 20 4179.000
M8 20 4180.000
Captive nuts/threaded blocks
On enclosures and rails with rectangular system
punching 12.5 x 10.5 mm, such as:
TS enclosure section
vertically, via adaptor rail for PS compatibility
horizontally, direct
ES enclosure body, all-round
Punched rail 23 x 23 mm
23 x 73 mm
45 x 88 mm
Punched section with mounting flange,
23 x 73 mm
Possible
alternative:
TS snap-on nuts, see page 471.
Captive nuts
The compression spring, designed as an inser-
tion aid, ensures reliable mechanical and electri-
cal connection in the system punchings.
M5 50 4166.000
M6 50 4164.000
M8 50 4165.000
Threaded block
With snap-off insertion aid, die-cast zinc.
M6 50 4162.000
M8 50 4163.000
Captive nuts
The nuts are inserted from the same side as
screw-fastening takes place. Consequently,
attachment points in the same height or width may
also be used around corners.
The spring cage also ensures electrical connec-
tion in the system punchings.
M6 50 8800.340
M8 50 8800.350
Assembly components
Spring nut M5
For
Comfort Panel from an installation depth of
74 mm
Optipanel from an installation depth of 100 mm
Compact Panel
The spring ensures reliable protection against
unintentional displacement.
Further interior installation, e.g. with mounting
bracket PS 4597.000 (see page 470) or mounting
bracket CP 6205.100 (see page 470).
Material:
50 6108.000
Threaded inserts M6
for KS
For securing installed equipment to the moulded
bosses in the door and in the enclosure rear
panel.
Screw length available for insertion: 8 mm.
Packs of Model No. KS
20 1482.000
Multi-tooth screws
M6 x 12 to fit:
Snap-on nuts (TS 8800.806)
U nuts for punched rails (PS 4179.000)
Captive nuts (PS 4164.000)
Threaded blocks (TS 4162.000)
M8 x 12 to fit:
Snap-on nuts (TS 8800.808)
Multi-tooth drive for optimum transmission of
torques, an extended tool life and increased
safety and reliability when tightening and loosen-
ing screw connections.
Type of screw
Dimensions
mm
Packs
of
Model No.
SZ
Multi-tooth screws
M6 x 12
M8 x 12
300
300
2504.500
2504.800
Metal multi-tooth
screws
5.5 x 13 300 2486.500
Metal multi-tooth
screws for stainless
steel
5 x 13 300 2486.300
Self-tapping screws:

Hex screws
Posidrive raised
countersunk
screws
Pan-head screws,
posidrive
Multi-tooth
pan-head screws
M5 x 10
M5 x 12
M5 x 12
M5 x 12
500
500
500
500
2504.000
2488.000
2489.000
2489.500
Self-tapping screws ST 4.8 x 16 300 2487.000
Metal multi-tooth screws
For the round holes 4.5 mm diameter in the
enclosure section, punched rails and punched
sections without mounting flanges.
Self-tapping screws
For the round holes 4.5 mm diameter in the
enclosure section, punched rails and punched
sections without mounting flanges.
Self-tapping screws
Mark, drill and tighten in a single operation using
electric or pneumatic tools.
For metal thickness: 0.8 3 mm
Length: 16 mm
Usable length: 9.5 mm
Width across flats: 8 mm
Assembly components
TS adaptor for wiring systems
Adaptor rail for the Ltze LSC wiring system.
Supply includes:
1 set =
6 adaptor rails,
24 spring lock washers,
Note:
Mounting parts for the LCS wiring system not
included with the supply.
For
enclosure depth
mm
500
1 set
8800.150
600 8800.160
800 8800.180
Installation kit for the Moeller MR 25 wiring
system.
Supply includes:
1 set =
2 baying clamps,
4 mounting rails, assembly parts.
For
enclosure depth
mm
400 1 set 8800.240
Kit
for separate frame TS
Every TS 8 frame is easily converted to a rack
suitable for dismantling. To this end, the frame
sections in the roof and base frame are separ-
ated, optionally in the width or depth. The four
connection components are inserted into the
frame section and screw-fastened. The external
dimensions of the frame remain unchanged.
Supply includes:
Assembly parts.
Note:
The maximum achievable IP protection category
is restricted by separation of the frame.
4 7829.400
Component shelves for frame attachment
1
3
4
2
Fastening bolts
Mounting rails
Installation kit
Telescopic slides
1
2
3
4
Component shelf
for frame attachment
Enclosure width 600 and 800 mm for TS
For installation in enclosures without 482.6 mm
(19) accommodation.
Max. depth of component shelves =
Enclosure depth 100 mm.
Mounting bolts or mounting rails may be
installed on a 25 mm pitch pattern in the
enclosure depth.
Mounting hole for handles provided.
Material:
Sheet steel
Colour:
RAL 7035
Supply includes:
Assembly parts.
Enclosure width 600 mm
Load capacity kg
(static surface load)
50 50 50 50 100 100 100 100
Component shelf depth mm 400 500 600 700 400 500 600 700
Component shelf height mm 29 29 29 29 45 45 45 45
Model No. DK, slotted 7164.035 7165.035 7166.035 7166.735 7464.035 7465.035 7466.035 7466.735
Model No. DK, unslotted 7264.035 7265.035 7266.035
Load capacity kg
(static surface load)
50 50 50 50 100 100 100 100
Component shelf height mm 29 29 29 29 45 45 45 45
Model No. DK, slotted 7184.035 7185.035 7186.035 7186.735 7484.035 7485.035 7486.035 7486.735
Also required:
TS punched section
with mounting flange,
17 x 73 mm, as installa-
tion kit for enclosure
depth, see page 459
500 8612.050 8612.050 8612.050 8612.050 8612.050 8612.050 8612.050 8612.050
600 8612.060 8612.060 8612.060 8612.060 8612.060 8612.060 8612.060 8612.060
800 8612.080 8612.080 8612.080 8612.080 8612.080 8612.080 8612.080 8612.080
1000 8612.000 8612.000 8612.000 8612.000 8612.000 8612.000 8612.000 8612.000
1200 8612.020 8612.020 8612.020 8612.020 8612.020 8612.020 8612.020 8612.020
Accessories:
Telescopic slides,
see page 489
7061.000 7081.000 7161.000 7161.700 7064.000 7065.000 7066.000 7066.700
Handles for component shelves,
see page 490
3636.010 3636.010 3636.010 3636.010 3636.010 3636.010 3636.010 3636.010
Hinged cable support see page 490
Component shelf, pull-out
for TS, PC-TS, IW
For direct mounting on the vertical TS enclosure
section.
Load capacity:
40 kg surface load, static
Material:
Sheet steel
Colour:
RAL 7015
Supply includes:
2 telescopic slides.
For enclosures
1)
Support area
Model No.
IW
Width
mm
Depth
mm
Width
mm
Depth
mm
600 600 465 545 6902.960
2)

600 800 465 745 6902.980
1)
For enclosures without a mounting plate.
2)
May also be installed in 800 mm deep enclosures
based on TS (pull-out rear attachment).
Component shelves for frame attachment
Component shelf,
static installation
for TS
Locate the mounting pieces in the frame and
attach the component shelf. Attachment in the
TS enclosure section offers the greatest possible
support surface.
Dimensions:
Height: 25 mm
Width: Enclosure width minus 44 mm
Depth: Enclosure depth minus 44 mm
Load capacity:
Material:
Sheet steel
Colour:
RAL 7035
Supply includes:
Assembly parts.
Note:
Combined use with vertically divided doors
is not possible.
Not suitable for combination with telescopic
slides.
For enclosures
Model No. DK
Width mm Depth mm
600 600 7828.660
600 800 7828.680
600 1000 7828.600
1)

800 600 7828.680
800 800 7828.880
800 1000 7828.800
1)
Component shelf,
static installation
for TS, PC-TS, IW
prepared for fan expansion kit
For direct mounting on the vertical TS enclosure
section. Simply located into 4 pre-fitted screws
and secure.
Load capacity:
Material:
Sheet steel
Colour:
RAL 7015
Supply includes:
Assembly parts.
Accessories:
Fan expansion kit DK 7980.XXX,
see page 222.
For enclosures
1)
Support area
Model No.
PC
Width
mm
Depth
mm
Width
mm
Depth
mm
600 600 507 550 8800.900
600 800 507 750 8800.910
1)
For enclosures without a mounting plate.
Drawer tray
pull-out
For enclosures with TS frame construction in
series IW, PC-TS.
Width 600 mm and depth 600 800 mm.
Tray height: 83 mm
Load capacity:
Material:
Sheet steel
Colour:
RAL 7035
Supply includes:
2 telescopic slides.
1 6902.700
Component shelves for attachment to the 482.6 mm (19) section
Component shelf,
482.6 mm (19) installation
Enclosures with two 482.6 mm (19) mounting
levels
Depending on their depth, the component shelves
have several attachment points, so the distance
between the 482.6 mm (19) mounting angles is
variable within certain limits. Each component
shelf secured in this way can be retrospectively
upgraded to full withdrawal using telescopic
slides. For this purpose, the telescopic slides are
screw-fastened in place of the spacers.
Load capacity:
Material:
Sheet steel
Supply includes:
Assembly parts.
Also required:
Adaptor for L-shaped mounting angles TS,
see page 488.
Installation kit, depth-variable, for installation
on mounting frames and L-shaped mounting
angles, see page 488.
Possible
alternative:
Component shelves, heavy-duty,
for 482.6 mm (19) installation,
see page 483 484.
50
T
200 (T 500)
100
50
2
9
T = Depth

Component shelf width mm 409 409 409 409 409 409 409 409
Distance between levels (X) 298 348/398
348/448/
498
448/548/
598
548/648/
698
348/448/
498
448/548/
598
548/648/
698
Colour
RAL 7035
RAL 9005
Model No. DK 7143.035 7144.035 7145.035 7145.635 7145.735 7145.005 7145.605 7145.705
Accessories:
Telescopic slides for 50 kg,
see page 489
7051.000 7061.000 7081.000 7161.000 7161.700 7081.000 7161.000 7161.700
Handles for component shelf,
see page 490
3636.010 3636.010 3636.010 3636.010 3636.010 3636.010 3636.010 3636.010
Hinged cable support see page 490
For TS:
Note for installation in network enclosures
based on TS, cranked mounting angle:
The component shelves are mounted on the sides
of the 482.6 mm (19) cranked mounting angles
with spacers on a U pitch pattern.
1
2
X
For TS:
Note for installation in network enclosures
based on TS, L-shaped mounting angle:
If L-shaped mounting angles are used,
adaptor DK 7827.300 is required, see page 488.
3
X
1
2
For TE, TS, 482.6 mm (19) system punchings:
Note for installation between two mounting
frames or L-shaped mounting angles:
May be mounted directly on the 482.6 mm (19)
system punchings using the depth-variable instal-
lation kit, see page 488.
4
2
Spacers
Telescopic slides
Adaptor
Installation kit, depth-variable
Distance between angles
1
2
3
4
X
Component shelf,
static installation
on the 482.6 mm (19) mounting frame
for TE, TS
The component shelf is attached directly to the
front and rear 482.6 mm (19) mounting angles.
Load capacity:
Material:
Sheet steel
Colour:
RAL 7035
Supply includes:
Assembly parts.
Note:
slides.
Width
mm
Height
mm
Depth
mm
Distance
between
482.6 mm (19)
levels
mm
Model No.
DK
511 22 413 495 7000.620
X
Component shelf, heavy-duty
for network enclosures TS
with cranked mounting angles
For static installation between two 482.6 mm (19)
mounting levels.
The component shelf is located directly onto the
cranked mounting angles.
Zinc-plated version:
Load capacity:
Material:
Sheet steel
Surface finish:
Zinc-plated
Supply includes:
Assembly parts.
Spray-finished version:
Load capacity:
Material:
Sheet steel
Colour:
RAL 7035
Supply includes:
Assembly parts.
Zinc-plated version:
Spray-finished version:
Note:
slides.
Possible
alternative:
Component shelf, heavy-duty, for 482.6 mm (19)
configuration, see page 484, may be combined
with telescopic slides, see page 489.
Dimensions Distance
between
levels (X)
mm
Model No.
DK
Width
mm
Height
mm
Depth
mm
452.5 20 478 498 7828.950
452.5 20 578 598 7828.960
452.5 20 678 698 7828.970
Dimensions Distance
between
levels (X)
mm
Model No.
DK
Width
mm
Height
mm
Depth
mm
453 44 470 498 7145.535
X
for network enclosures TS with L-shaped
mounting angles
For static installation between two 482.6 mm (19)
mounting levels.
The component shelf is located directly onto the
L-shaped mounting angles.
Load capacity:
Material:
Sheet steel
Surface finish:
Zinc-plated
Supply includes:
Assembly parts.
Note:
slides.
Possible
alternative:
Component shelf, heavy-duty, for 482.6 mm (19)
configuration, see page 484, may be combined
with telescopic slides, see page 489.
Dimensions Distance
between
levels (X)
mm
Model No.
DK
Width
mm
Height
mm
Depth
mm
507.5 20 480 498 7828.951
507.5 20 580 598 7828.961
507.5 20 680 698 7828.971
482.6 mm (19)
for TE, TS
L-shaped mounting angles
Mounting frame 482.6 mm (19)
Load capacity:
Material:
Sheet steel
Supply includes:
Assembly parts.
Colour: RAL 7035
Colour: RAL 9005
Also required:
Installation kit, depth-variable DK 7063.890,
see page 488.
Accessories:
Telescopic slides (100 kg) for 482.6 mm (19)
component shelf, see page 489.
Handles for component shelf, see page 490.
Width
mm
Height
mm
Depth
mm
Model No.
409 45 500 7063.895
409 45 700 7063.897
Width
mm
Height
mm
Depth
mm
Model No.
409 45 500 7063.835
1)

409 45 700 7063.837
1)
Component shelves for attachment to the 482.6 mm (19) punchings
Component shelf 2 U
482.6 mm (19) for 482.6 mm (19)
system punchings
Suitable for installation in all enclosures with only
one 482.6 mm (19) recess and all swing frames
with flange mounting, 482.6 mm (19).
Load capacity:
Material:
Sheet steel
Colour:
RAL 7035
Supply includes:
Assembly parts.
Accessories:
Telescopic slides for component shelf,
see page 489.
see page 490.
Width
mm
Depth
mm
Model No. DK
390 300 7148.035
Component shelf 1 U,
depth-variable
482.6 mm (19) for 482.6 mm (19) system
punchings
For mounting between the front and rear 482.6 mm
(19) levels. The component shelf is infinitely
depth-adjustable from 488 mm to 750 mm.
Load capacity:
Material:
Sheet steel
Colour:
RAL 7035
Note:
slides.
Distance between levels
mm
Model No. VR
488 750 3861.580
Component shelf
1
/
2
U,
depth-variable
482.6 mm (19) for 482.6 mm (19) system
punchings
For mounting between the front and rear 482.6 mm
(19) levels. The component shelf is infinitely
depth-adjustable from 488 mm to 750 mm.
Load capacity:
Material:
Sheet steel
Note:
slides.
Distance
between levels
mm
Colour Model No. DK
400 600 RAL 7035 7063.710
600 900 RAL 7035 7063.720
600 900 RAL 9005 7063.725
Component shelf,
complete set, pull-out
482.6 mm (19) for 482.6 mm (19) system
punchings
Tailored to the distance between levels in enclo-
sures as per their supplied state of 495 mm, this
complete set contains a vented component shelf,
telescopic slides and a mounting kit for direct
attachment.
The mounting kit also offers depth-variable attach-
ment within 395 645 mm on a 25 mm pitch pat-
tern.
Load capacity:
50 kg, static
Material:
Base: Sheet steel
Surface finish:
Base: Spray-finished
Mounting kit/telescopic slides: Zinc-plated
Colour:
RAL 7035
Supply includes:
1 component shelf
Telescopic slides
Installation kit
Accessories:
see page 490.
Base depth
mm
500 1 set 7000.625
static installation
482.6 mm (19)/535 mm (metric) for
482.6 mm (19) system punchings
The ideal support surface for small active
components such as modems or mini-hubs in
482.6 mm (19) or metric levels.
Load capacity:
Material:
Sheet steel
Colour:
RAL 7035
Note:
slides.
Also required:
Captive nuts,
see page 477.
Screws,
see page 478.
Component
shelf depth
mm
Model No. DK
482.6 mm (19) Metric
140 7119.140 7119.155
1)

1)
static installation
482.6 mm (19)/535 mm (metric)
for 482.6 mm (19)/metric system punchings
If only one 482.6 mm (19) or metric mounting
level is available for mounting a component shelf,
this variant offers a particularly cost-effective solu-
tion.
Load capacity:
Material:
Sheet steel
Colour:
RAL 7035
Note:
slides.
Also required:
Captive nuts,
see page 477.
Screws,
see page 478.
Component
shelf depth
mm
482.6 mm
(19)
Metric
Model No.
DK
250 7119.250
400 7119.400
250 7119.255
400 7119.455
Utility table
for location in the 482.6 mm (19) level
for 482.6 mm (19) system punchings
The utility table may be attached directly between
the 482.6 mm (19) mounting angles without any
additional assembly work. The utility table has a
height of 3 U and a support area of 450 x 295 mm;
it can be used as a support for measuring devices
or splicing equipment during maintenance and
wiring work.
Material:
Sheet steel
Colour:
RAL 7035
Supply includes:
Assembly parts.
Note:
Installation in enclosures with a TS trim frame is
not possible.
Support surface mm Model No. DK
450 x 295 7183.100
Shelf
for AE with pull-out frame
The vented shelf is inserted into the pull-out frame
of wall-mounted distributor DK 7644.000 and may
additionally be screw-fastened. In this way, an
additional support surface can be created with
very little effort. Captive nuts may be clipped into
the punchings of the frame, even after the shelf
has been inserted.
Material:
Sheet steel
Colour:
RAL 7035
Supply includes:
Assembly parts.
Width mm Depth mm Model No. DK
430 195 7644.400
Installation kits for component shelves
as installation kit for component shelves
Simply locate and secure. One pack is sufficient
for 2 component shelves.
Load capacity:
Material:
Sheet steel
Surface finish:
Zinc-plated
Supply includes:
Assembly parts.
Installation
in enclosure depth
mm
500 4 8612.050
600 4 8612.060
800 4 8612.080
1000 4 8612.000
1200 4 8612.020
for 482.6 mm (19) component shelf
In conjunction with
L-shaped mounting angles or
Mounting frame 482.6 mm (19)
Infinitely adjustable to the spacing between the
two pairs of 482.6 mm (19) mounting angles.
Suitable for all 482.6 mm (19) component shelves
in 409 mm width.
Material:
Sheet steel
Surface finish:
Zinc-plated
Supply includes:
1 set =
2 mounting rails including assembly parts.
Accessories:
Telescopic slides,
see page 489.
Length mm Load capacity U Model No. DK
390 590 50 kg 1 7063.858
490 710 100 kg 1.5 7063.892
1)

590 790 50 kg 1 7063.860
706.5 1006.5 100 kg 1.5 7063.890
1)
Max. depth of component shelves: 500 mm
Adaptor for L-shaped
mounting angles
for TS network enclosures
For mounting component shelves and slide rails
on L-shaped mounting angles.
Material:
Sheet steel
Supply includes:
Assembly parts.
4 7827.300
Installation kit
for component shelves and drawers,
with 482.6 mm (19) installation in TS
For installation between the front and rear adap-
tor sections or adaptor pieces, 482.6 mm (19) in
600 mm wide enclosures.
Material:
Supply includes:
Assembly parts.
Also required:
Mounting angles, 482.6 mm (19),
see page 551.
Adaptor pieces, 482.6 mm (19),
see page 552.
For
enclosure depth
mm
600 1 set 8800.560
800 1 set 8800.580
Max. depth of component shelves =
Enclosure depth minus 100 mm.
Accessories for component shelves
Side parts 3 U
for static installation of component shelves,
482.6 mm (19)
For the attachment of component shelves to a
single pair of 482.6 mm (19) mounting angles.
The component shelves are screw-fastened to the
3 U side part.
Either one or two component shelves may be
secured.
Load capacity:
Material:
Sheet steel
Colour:
RAL 7035
Supply includes:
2 side parts.
Note:
slides.

Note:
Component shelves, 482.6 mm (19),
see page 482.
Depth of
side parts
mm
For
component shelf
DK
Component
shelf depth
mm
Model No.
DK
400 7143.035 300
7147.035 400 7144.035 400
400 7145.035 500
3
1
2
Fastening bolts
Mounting rails
Telescopic slides
1
2
3
Telescopic slides
for component shelves
Fixed component shelves are easily converted
to full withdrawal. For this purpose, the existing
fastening bolts or mounting rails (heavy-duty
version) are exchanged for the telescopic slides.
For installation and locking on a 25 mm pitch
pattern in the enclosure depth.
Load capacity:
50 kg/100 kg per set
Material:
Load capacity 50 kg
Load capacity 100 kg
For
component shelf depth
mm
300 2 7051.000
400 2 7061.000
500 2 7081.000
600 2 7161.000
700 2 7161.700
For
component shelf depth
mm
400 2 7064.000
500 2 7065.000
600 2 7066.000
700 2 7066.700
Accessories for component shelves
Cable support
hinged, with clamp
For secure routing of connection cables from the
component shelf to the clamping point.
The attachment may be released on both sides
thanks to clamps.
Material:
Supply includes:
Assembly parts.
For enclosure depth mm Model No. DK
< 600 7163.500
> 600 7163.550
Cable support
hinged, with anti-kink device and clamp
For secure routing of connection cables from the
component shelf to the clamping point. Kink-free
cable routing in the central part via mobile chain
links. The attachment may be released on both
sides, thanks to clamps.
Material:
Centre part: Plastic
Supply includes:
Assembly parts.
For enclosure depth mm Model No. DK
< 600 7163.560
> 600 7163.565
Handles
for pull-out component shelves
The component shelves are prepared for the
attachment of handles.
Material:
Die-cast zinc
Surface finish:
Spray-finished, silver-grey
Supply includes:
Assembly parts.
Packs of Model No. RP
2 3636.010
Fastening bolts
for slotted component shelves
For non-slip attachment of your components.
The bolts are screwed into the slots of the com-
ponent shelf support surface. Consequently, they
are infinitely adjustable and can be adapted to
suit any appliance.
4 7115.000
System lights
System lights
for direct attachment in all large enclosures
for mounting on compact enclosures,
wall-mounted enclosures and in the console
system with system accessories.
IP 20 to IEC 60 529
Also required:
Connection accessories,
see page 496.
Accessories:
Adaptor bracket,
see page 471.
Universal bracket,
see page 476.
Rail for interior installation,
see page 459.
Technical comparison/equipment
Standard
light
Courtesy
light
Universal
light
Compact
light
LED
system
light
Page 492 492 492 493 494
Voltage
supply
100 240 V AC, 50/60 Hz
120 V AC, 60 Hz
230 V AC, 50 Hz
24 V DC
Full-electronic ballast
Light
Fluorescent lamp, base G13
Compact fluorescent lamp, base G24q-3
Fluorescent lamp T5
LEDs, cold white
Protection
category
II (all-insulated)
III (SELV)
Installation
type
Screw-fastening
Clip attachment
Magnetic attachment (accessory)
Mounting
options
TS roof frame
(horizontal
section)
direct
TS
vertical section
with adaptor bracket
direct
AE, CM, TP
with universal bracket
with magnetic
attachment

AE
with rail for interior
installation

Connection
options
Infeed/connection cable
3)

Through-wiring
(series connection of several lights)

Approvals
UL/cUL
2)

2)

2)

1)

ENEC
2)

2)

VDE
2)

Equipment
Light cover
Light cone adjustment
Integral sockets, earthing-pin
2)

Integral sockets, USA
2)

Integral motion detector
Integral door-operated switch
2)

2)

1)
Safety extra-low voltage, not required by the standard.
2)
Depending on the equipment.
3)
Integral
System lights
Standard light
Without door-operated switch
With door-operated switch
Also required:
see page 496.
Technical specifications Socket
Width
mm
Height
mm
Depth
mm
Model No. SZ Approvals
14 kW, 230 V, 50 Hz Earthing-pin 452 117 50 4138.140 ENEC
14 kW, 120 V, 60 Hz USA 452 117 50 4138.240 cURus
18 kW, 120 V, 60 Hz USA 682 117 50 4138.280 cURus
30 kW, 120 V, 60 Hz USA 987 117 50 4138.400 cURus
Width
mm
Height
mm
Depth
mm
14 kW, 120 V, 60 Hz USA 452 117 50 4138.250 cURus
18 kW, 120 V, 60 Hz USA 682 117 50 4138.290 cURus
30 kW, 120 V, 60 Hz USA 987 117 50 4138.450 cURus
Courtesy light
Without door-operated switch
With door-operated switch
Also required:
see page 496.
Width
mm
Height
mm
Depth
mm
14 W, 100 240 V, 50/60 Hz Earthing-pin 452 117 50 4139.140 ENEC
Width
mm
Height
mm
Depth
mm
Universal light
With integral motion detector
Also required:
see page 496.
Width
mm
Height
mm
Depth
mm
26 W, 110 240 V,
50 60 Hz
Earthing-pin 345 95 55 4155.100 VDE
345 95 55 4155.000 VDE
345 95 55 4155.500 UL
System lights
B3
6.5
Compact light
Slimmer Faster Brighter
Slimmer: Around 50% less height and depth
and also around 75% less volume than conven-
tional lights.
Faster: Universal fast attachment via clips,
screws, or powerful magnets (optional).
Simply slide in at the side or rear, fit the light,
and it's done!
Brighter: Up to 75% greater luminous efficiency
from the lamp with the same power helps to cut
electricity costs.
Door-operated switch can also be connected
via a 2-pole connection.
Colour:
Similar to RAL 7035
IP 20 to IEC 60 529
Supply includes:
Compact light with clip and screw mounting kits,
including assembly parts.
Accessories:
Mounting kit magnet,
see page 493.
Door-operated switch with connection cable,
see page 496.
B2
Clip/magnet
attachment
Screw
attachment
B1
B B
24
A
5
9
Rear fastening
Side attachment
A
B
Model No. SZ
ENEC 24 4140.010 4140.020 4140.110 4140.120
cURus 4140.210
1)
4140.220
1)

Rated voltage 100 240 V AC 10% at 50 60 Hz 24 V DC 10%
Wattage 8 14 8 14
Protection category II (all-insulated)
Width (B1) mm 455 705 455 705
Mounting distance (B2) mm
Clip/magnet
400 650 400 650
Mounting distance (B3) mm 475 725 475 725
Connection cable 3 m (open end)
Cover colour Yellow Grey Yellow Grey Yellow Yellow
Rated current (A)
at 230 V AC
at 110 V AC
at 24 V DC
0.045 0.088
0.083 0.149

0.073 0.127
0.149 0.216

0.35

0.57
Light Fluorescent lamp T5
Operating unit Wide-range electronic ballast Electronic ballast
Circuit-breakers Integral, on/off/door-operated switch mode
Light cover Transparent, grooved on the inside
Cable deflector across rear
1)
Only for the North American market
B
A
B
A
Mounting kit magnet
For reliable adhesion on all sheet steel surfaces.
2 4140.000
System lights
LED system light
in 24 V DC version
Max. EMC capacity
Safe, thanks to use with safety extra-low voltage
Economical energy use
Low-maintenance thanks to the use of LEDs
May be connected to a door-operated switch
Integral through-wiring
Universal attachment options
Vertically hinged light cone
Material:
Light body: Extruded aluminium
Light cover: Polycarbonate (halogen-free)
Light ends: PC-ABS
Colour:
Similar to RAL 7035
IP 20 to IEC 60 529
Supply includes:
System light with clip and screw mounting kits,
assembly parts.
Also required:
LED connection cable, see page 495 or
Door-operated switch with LED connection
cable, see page 495.
Accessories:
Mounting kit magnet, see page 493.
Door-operated switch with LED connection
cable, see page 495.
LED connection cable, see page 495.
Adaptor power pack, see page 495.
Note:
Only intended for use in enclosures and sealed
cases!
When using on customer-supplied power packs,
it is important to obtain the requisite approvals
depending on the application!
Model No. SZ 4140.810 4140.820 4140.830 4140.840
Rated voltage 24 V DC ( 10%)
No. of LEDs 10 20 30 40
Protection category III (SELV)
Width (B1) mm 230 330 430 530
Mounting distance CLIP (B2) mm 175 275 375 475
Mounting distance, screw attachment (B3) mm 250 350 450 550
Rated current (A)
1)
0,04 0,08 0,12 0,16
Circuit-breakers Integral on/off/door-operated switch mode
1)
Maximum baying up to a total rated current strength of 2 amps.
20.64
3
2
.
8
B1
8
.
2
B2
B3
System lights
1

2 3
4
5
Connection accessories
for LED system light
Layout diagram for LED system light 24 V DC:
Connection cable
Door-operated switch with LED connection cable (open end/cable bush)
Door-operated switch with LED connection cable
LED connection cable for through-wiring
Connection cable
Length
mm
LED connection cable 3000 1 4315.800
Length
mm
With LED connection cable 3000 1 4315.810
With LED interconnecting cable 1000 1 4315.820
Interconnecting cable
Length
mm
LED interconnecting cable
600 1 4315.830
1000 1 4315.840
3000 1 4315.850
Adaptor power pack Technical specifications Packs of Model No. SZ
Adaptor power pack 230 V AC/24 V DC, 1 A 1 4315.860
1
2
3
4
5
1
2
3
4
4
1
2
3
+ U
GND
System lights
1 2
3
4
5
6
7
The following components can be used for time-
saving and simple installation of the lights:
Accessories:
Cable ties for quick assembly,
see page 530.
Connection cable
for
UL
Length
mm
Packs
of
Model No. SZ
Orange Grey
Power supply (with socket, without connector) 3000 5 4315.100

Power supply (with socket and strain relief,
without connector)
3000 1 4315.150
Through-wiring (with socket and connector) 600 1 4315.450

Through-wiring/power supply via
connection component SZ 2507.500
(with socket and connector)
600
5
4315.400
1000 4315.200
4000 1 4315.600
1
1
2
2
With mounting accessories
UL
Length
mm
Technical
specifications
Packs
of
Model No. SZ
Orange Yellow Grey

With connection cable
(not required for universal lights
and standard/courtesy lights
with integral door-operated
switch)
600
240 V AC, 6 A
125 V DC, 8 A
24 V AC, 6 A
24 V DC, 6 A
1 4315.520
1000 1 4315.320

600 1 4315.550
1000 1 4315.350
Without connection cable 1 4127.010

(for compact light)
600 1 4315.710
600 1 4315.720
Also required
Mounting kit for installation in TE
Model No. FR
7952.100
3
4
With toggle
UL
Technical
specifications

Without connection cable, for TS enclosures with installed
large swing frame.
The toggle is actuated via the tubular door frame of the
sheet steel door, or in the case of glazed doors,
via an adaptor included with the supply.

240 V AC, 6 A
125 V DC, 8 A
24 V AC, 6 A
24 V DC, 6 A
1 4127.210 5
Connection component with circuit-breaker 10 A Packs of Model No. SZ

Reduce assembly costs:
Power is supplied rapidly and reliably to system and workstation lights
via connection cables.
For self-configured cables, connector SZ 2507.200 must be used.
Connection component to be snapped onto the top hat rail.
1 2507.500 6
For self-assembly Packs of Model No. SZ

Sockets for power supply through-wiring 5 2507.100
Connectors for connection component through-wiring 5 2507.200
T distributor with 2 sockets, 1 connector 5 2507.300
Connector for door-operated switch cable 5 2507.400
7
Connection cable for infeed
Connection cable for through-wiring/infeed
Door-operated switch with connection cable
1
2
3
1 2
3
System lights
Enclosure light, 48 V DC
Robust light. For attachment vertically or horizon-
tally in the frame section via spring brackets, or
may be used as a direct light source during main-
tenance work by inserting the plastic swivel hook.
Impact-resistant lamp housing of PMMA
(polymethylmethacrylate) protection category II.
IP 64
Supply includes:
2 spring clips
Assembly parts
Luminosity: 11 W
Luminous efficiency: 900 lm
Fluorescent tube: TC-SEL 11 W, 4-pin
Ambient temperature: 20C to +40C
Voltage: 48 V DC 10%
Supply lead 3000 mm, H05RN 2 x 1 mm,
without connectors, with crimped ferrules
Length:
450 mm overall
Protective tube 320 mm
Light outlet 195 mm
Diameter:
62 mm overall
Protective tube 38 mm
1 9765.150
Light 1 U
Complete ready-to-connect light for installation in
the 482.6 mm (19) mounting angles. The slot
attachment additionally allows it to be fastened to
the 25 mm system punchings.
Fluorescent tube 8 kW, 230 V, 50 Hz
Mains switch
2.5 m connection cable
Earthing-pin connector
Material:
Aluminium, anodised
Plastic
1 7109.200
EMC
Rail
for EMC shielding bracket and strain relief
Combined rail for strain relief and EMC contact-
ing of inserted cables.
Mounting options:
On the horizontal/vertical TS, PC, ES enclosure
section
On a mounting plate
May also be fitted without a retaining bracket.
Additional contacting on the left or right of the rail
via existing holes (9 mm diameter).
Material:
Sheet steel
Surface finish:
Zinc-plated
Supply includes:
1 rail
2 retaining brackets
Assembly parts
Also required:
EMC shielding bracket,
see page 498.
Cable clamps for strain relief,
see page 529.
Accessories:
Earth straps,
see page 501.
Earthing strap,
see page 501.
Width mm Packs of Model No. SZ
600 1 2388.600
800 1 2388.800
1000 1 2388.000
1200 1 2388.120
2
5
43 5
31
13
12
6
.5
6
.
5
553/753/963/1153
535/735/935/1135
525/725/925/1125
479/679/879/1079
8
0
2.5
20
10
25
45
75
95
8
0
8
6
.
5
95
Mounting position Retaining bracket
Rail
1
9
4
.5
2
5
7
2
5
15
EMC shielding bracket
Quick assembly without the use of tools:
Press the EMC shielding bracket against the
cable shield and clip into the rail.
Diameter changes are compensated in full by
the spring of the EMC shielding bracket.
Material:
Sheet steel
Surface finish:
Zinc-plated
For shield diameter
mm
3 10 10 2388.100
4 15 10 2388.150
10 20 10 2388.200
15 28 10 2388.280
EMC
EMC gland plates
For shielded cables with a maximum diameter of
20 mm.
Combined EMC/IP seal provides low-resistance
contact between cable shield and gland plate.
For all 400, 500, 600 and 800 mm deep enclo-
sures in conjunction with standard gland plates.
Material:
Sheet steel
Surface finish:
Zinc-plated
Supply includes:
1 gland plate with T-head punching
1 sliding gland plate
2 IP/EMC gaskets
Width mm Packs of Model No. TS
600 1 set 8800.660
800 1 set 8800.680
1000 1 set 8800.600
1)
1200 1 set 8800.620
1)
1)
For one enclosure half only
EMC cable glands
The cable sheathing may optionally be inter-
rupted at the contact point or removed com-
pletely inside the enclosure.
The cable shield in the enclosure is retained.
The supplied lock nut cuts automatically into the
paint when screwed down, thus creating a con-
ductive connection.
IP 68 to IEC 60 529
IP 69K to DIN 40 050-9
Possible
alternative:
Cable gland Hygienic Design,
see page 521.
Cable glands, metric
Cable glands, PG
Size
Cable
diameter
mm
Minimum
1)

shield
diameter
mm
Packs
of
Model No.
SZ
M16 4.5 10 3 5 2843.160
M20 6 12 5 5 2843.200
M25 11 17 8 5 2843.250
M32 15 21 10 1 2843.320
M40 19 28 15 1 2843.400
M50 27 38 19 1 2843.500
M63 34 44 30 1 2843.630
1)
Minimum shield diameter =
cable diameter minus cable sheathing
PG
size
Cable
diameter
mm
Minimum
1)

shield
diameter
mm
Packs
of
Model No.
SZ
9 4 8 3 5 2411.090
11 5 10 4 5 2411.110
13.5 6 12 5 5 2411.140
16 10 14 8 5 2411.160
21 13 18 10 1 2411.210
29 18 25 15 1 2411.290
1)
Minimum shield diameter =
cable diameter minus cable sheathing
EMC shield bus
Made of clear chromated steel strip,
75 mm
2
cross section, for cable shield contact.
Supply includes:
Assembly parts.
Rail length
mm
Connections
Packs
of
Model No. SZ
375 10 1 2413.375
550 16 1 2413.550
EMC
EMC earth clamps
The clamps may be used directly on the device
or operating equipment on the mounting plate for
cable shield contact.
Material:
Sheet steel
Surface finish:
Zinc-plated
Size
mm
4 50 2367.040
6 50 2367.060
8 50 2367.080
12 50 2367.120
16 50 2367.160
20 25 2367.200
1)

1)
2 assembly brackets
EMC baying seal
for TS
For baying enclosure systems.
Seal with all-round, electrically conductive
sheathing.
Supply includes:
3 seals, length 2 m each.
Cross section
mm
Model No. TS
6.3 x 6.3 8800.690
EMC divider panel seal
This seal ensures optimum contact in bayed EMC
enclosure systems and when using a zinc-plated
divider panel.
Material:
PU foam with electrically conductive sheathing.
Supply includes:
1 roll (12.7 x 12.7 x 5300 mm).
1 4348.000
Contact cutter
The contact cutter enables EMC-compatible pre-
paration of the contact point e.g. for earthing
straps.
Plastic-bound abrasive with guide pin for round
system punchings.
With location point for drill, grinder etc.
For Model No. SM
Frame section 2414.000
Earthing bolts
1)
2414.500
1)
Not necessary with TS
Contact paint
Contact paint prevents the corrosion of conduc-
tive, unprotected contact points.
Contents:
12 ml
1 2415.000
Earthing
Earth straps
For configuring a reliable earthing connection with
perfect contact.
With ring terminals in M6 and M8 to match the
earthing screw
Length-optimised and ready to install
Enclosure
Connection facility
Door/lid Enclosure
Mounting
plate
KL M6 M6 M8
EB/BG M6 M6/M8
1)
AE M6 M6
2)
/M8 M8
KE/KEL M8 M8 M8
AP/CM/TP M6 M8 M8
TS/ES M8 M8 M8
PC M8 M8
1)
M8 with BG 1050.900
2)
M6 with AE 1032.XXX/AE 1035.XXX
Connection
Cross-
section
mm
2

Length
mm
Packs
of
Model No.
SZ
M8 M8 4 170 5 2564.000
M8 M8 16 170 5 2565.000
M8 M8 25 170 5 2566.000
M6 M6 10 200 5 2565.100
M8 M8 4 300 5 2567.000
M6 M8 10 300 5 2565.110
M8 M8 10 300 5 2565.120
M8 M8 16 300 5 2568.000
M8 M8 25 300 5 2569.000
Earthing strap
Tin-plated copper, in various lengths and cross-
sections with press-fitted contact rings. Earthing
straps counteract the current displacement effect
at high frequencies, whilst at the same time offer-
ing highly flexible connection opportunities.
For
Cross-
section
mm
2

Length
mm
Packs
of
Model No.
SZ
M6 10 200 10 2412.210
M8 16 200 10 2412.216
M8 25 200 10 2412.225
M6 10 300 10 2412.310
M8 16 300 10 2412.316
M8 25 300 10 2412.325
Assembly parts
for system punchings
For fastening the earth straps and earthing braids
to:
Horizontal TS enclosure sections
PS rail system
ES system punchings. Also required:
For mounting on the horizontal TS enclosure
section: Captive nut, see page 477.
Size Packs of Model No. SZ
M6 10 set 2570.000
M8 10 set 2559.000
Assembly parts
for gland plates
For fastening the earth straps and earthing braids
to:
Gland plates
Fast assembly thanks to self-tapping screws.
M8 10 set 2570.200
Contact washers
Serrated contact washers facilitate secure PE
conductor connection. As a result, there is no
need to manually strip paint in the connection
area.
M5 100 2343.000
M6 100 2334.000
M8 100 2335.000
Earthing
Earthing plate
Comfort Panel
Optipanel
TS
ES
One earthing cable can be screw-fastened to
the threaded bolt and can be distributed to up to
8 components via 6.3 mm flat-pin connectors.
Supply includes:
Assembly parts.
1 2570.500
Central earthing point
For connecting
Earth straps
Earthing braids
to the vertical and horizontal enclosure profile.
The connection bracket is connected to the
enclosure frame with 2 screws and is securely
contacted.
Earth connection is carried out via the threaded
bolt M8 x 20 mm.
Material:
Supply includes:
1 connection bracket
2 screws 5.5 x 13 mm
2 serrated washers
1 nut M8
1 contact washer M8
1 washer
1 7829.200
Potential equalisation star
for 8 mm earthing bolt
The earthing connector is used for simple po-
tential equalisation on an 8 mm earthing bolt,
or in conjunction with central earthing point
DK 7829.200. Up to five flat connectors (6.3 mm)
may be contacted on one earthing point.
Supply includes:
10 earthing connectors
Assembly parts
10 7548.210
Complete earthing kit
for TS
To DIN EN 60 950/VDE 0805, 4 mm
2
, Imax. 40 A.
For system-compatible earthing of all enclosure
parts on the enclosure frame according to VDE.
The earth conductors are pre-assembled ready
for connection with connectors and cut to the
right length.
Supply includes:
8 earth straps
Central earthing point and assembly parts
1 set 7829.150
Extension kit
for complete earthing kit
for TS
To DIN EN 60 950/VDE 0805, 4 mm
2
, Imax. 40 A.
To extend the complete earthing kit DK 7829.150,
in order to keep additional components potential-
free.
Conductor length 300 mm in each case.
For 6.3 mm flat-pin connectors, 8 mm earthing
bolts or for attachment with contact washers and
screw.
Supply includes:
5 earth straps
Assembly parts and identification labels
1 set 7829.152
Earthing
Complete earthing kit
for TE
To DIN EN 60 950/VDE 0805, 4 mm
2
, Imax. 40 A.
For system-compatible earthing of all enclosure
parts on the enclosure frame according to VDE.
The earth conductors are pre-assembled ready
for connection with connectors and cut to the right
length.
Supply includes:
Earthing strip
4 earth straps, 300 mm
4 earth straps, 550 mm
Assembly parts
1 set 7000.675
Earthing kit KE
For producing the required external potential
equalisation for painted series enclosures
KL
AE
TS
For applications in Unit Group II, Category 3, in
compliance with Directive 94/9 EU-Appendix VIII,
internal production control.
Packs of Model No. KE
5 9214.000
Earthing kit
for KL
Consisting of all the screws, nuts, contact wash-
ers and earthing strip needed to earth the cover;
length 250 mm, cross-section 4 mm
2
.
Packs of Model No. KL
5 2570.100
Earthing kit
for QuickBox
Earth straps in the appropriate lengths to match
the enclosure depth are included in the earthing
set, for earthing all enclosure panels on the wall
mounting part. The earth strap is a fast-on con-
nector which is quickly disconnected and con-
veniently accessible when the door is open.
In this way, the enclosure cover can be removed
completely.
Supply includes:
5 earthing leads 1.5 mm
2
4 cable retention clips
Assembly parts
For
enclosure depth
mm
300/400 1 set 7502.240
500/600 1 set 7502.260
PE busbar
699 mm long PE busbar with pre-fitted screws,
including terminal clamps up to 6 mm
2
(fine wire
conductors), 10 mm
2
(single wire or multi-wire
conductors) and main terminal clamp up to
35 mm
2
.
Accessories:
Rail mounting bracket,
see page 476.
1 2364.000
Earthing
Earth rail, horizontal
for TS
Potential equalisation rail
Current carrying capacity approx. 200 A.
Supply includes:
Earth rail made from E-Cu 57 to DIN 12 163,
DIN EN 13 601, 15 x 5 mm
20 connection points with M5 screws
2 earth connections 25 mm
2
2 isolators, including assembly parts
Length mm Packs of Model No. DK
450 1 7113.000
Earthing kit, pre-assembled
for TS
For star earthing. With the pre-assembled earth
conductors on a potential equalisation rail, star
potential equalisation is easily integrated into net-
work enclosures.
Supply includes:
Earth rail made from E-Cu 57 to
DIN EN 12 163, DIN EN 13 601
16 earthing leads 6 mm
2

2 isolators
Assembly parts
For TS enclosures
up to W x H x D mm
800 x 2000 x 800 1 set 7829.100
800 x 2200 x 1000 1 set 7829.110
Earth rail, vertical
for TS
Easily fitted to the 25 mm DIN pitch pattern of
distributors or to the 482.6 mm (19) mounting
angles. The supplied earth conductors facilitate
star earthing of the cable clamp straps in the
patch panels.
The earth terminals are fully adjustable.
Current carrying capacity of rail approx. 200 A.
Supply includes:
Earth rail made from E-Cu 57 to
DIN 12 163, DIN EN 13 601, 15 x 5 mm
16 conductor connection clamps 2.5 16 mm
2
2
, L = 500 mm
Assembly parts
For
enclosure
height
mm
Length
mm
Packs of
Model No.
DK
800 600 1 set 7541.000
1000 800 1 set 7542.000
1200 1000 1 set 7543.000
1400 1200 1 set 7544.000
1600 1400 1 set 7545.000
1800 1600 1 set 7546.000
2000 1800 1 set 7547.000
2200 2000 1 set 7548.000
Extension kit
for earth rail, vertical
For system-compatible expansion of the star
earthing on the vertical potential equalisation rail.
Supply includes:
2
, L = 500 mm,
Preassembled, with ring terminal and wire end
ferrule
Earth terminals, 2.5 16 mm
2

Assembly parts
10 7549.000
ESD connection point
Dangerously high potential differences can occur
during maintenance or conversion work on the
enclosure. To protect sensitive electronic compo-
nents, this standardised connection point (push-
button) provides potential equalisation. The con-
nection point is directly conductively connected
to the enclosure frame via two screws.
Material:
Supply includes:
Assembly parts.
1 7752.950
Socket strips
Voltage supply
Socket strips
The socket strips in the aluminium channel are
available in various lengths with different func-
tional elements. Special attention has been
devoted to practical, universal fastening:
With a bracket which may be used in four posi-
tions, there is a range of attachment options.
Hence, for example, the 482 mm long socket strip
may optionally be mounted on 482.6 mm (19)
mounting angles, the 482.6 mm (19) mounting
frame, on the enclosure frame, or in the rear
section of the wall-mounted distributor. Without
additional mounting accessories, the socket strip
may be inserted into all sections with a 25 mm
pitch pattern. This makes selection much easier,
as well as providing additional flexibility and
saving on warehousing. Provision has also been
made for cable routing of the infeed, and when
mounting in the 482.6 mm (19) section there is
adequate space to route the infeed between the
socket strip and the mounting angle without kinks.
The arrangement of the sockets at a 45 angle
allows unrestricted use of angular connectors.
Rated voltage: 250 V
Rated current: 10/16 A
Connection cable: 2 m long H05VV-F3G1.5
Material:
Aluminium section: Natural-anodised
Socket inserts: Polycarbonate
Supply includes:
Socket strip
Two mounting brackets
Assembly parts
Standards:
Sockets:
DIN VDE 0620-1
Sockets B/F:
UTE NFC 61-303, CEE 7/NV
Overvoltage protection for low voltage:
DIN EN 61 643-11 (VDE 0675 Part 6-11)
EMC interference suppression filter:
DIN EN 60 939-2 (VDE 0565 Part 3),
DIN VDE 0620-1 (VDE 06204-1)
Detailed drawings and further information:
3
1
.7
5
4
4
4
4
T
2
T
1
Design
Connec-
tion
Number
of
sockets
Connector
type
Attachment
Length
(T1)
mm
Mounting
dimen-
sion
(T2)
mm
1)

Model No.
DK
Frame
Wall-
mounted
distribu-
tor, hori-
zontal
482.6 mm
(19)
level
Without rocker switch Cable
3 Earthing-pin 262.6 232.5 7240.110
7 Earthing-pin 482.6 452.5 7240.210
12 Earthing-pin 658.6 628.5 7240.310
With rocker switch Cable
3 Earthing-pin 306.6 276.5 7240.120
7 Earthing-pin 482.6 452.5 7240.220
Overvoltage protection
and interference
suppression filter
Cable
5 Earthing-pin 482.6 452.5 7240.230
9 Earthing-pin 658.6 628.5 7240.330
Miniature circuit-breaker Cable 5 Earthing-pin 482.6 452.5 7240.240
Master-slave Cable 1 + 3 Earthing-pin 482.6 452.5 7240.250
UPS strip C14 7 Earthing-pin 482.6 452.5 7240.260
RCCB Cable 5 Earthing-pin 482.6 452.5 7240.280
RCCB and line protec-
tion
Cable 5 Earthing-pin 482.6 452.5 7240.290
For IEC 320 connectors,
10 A
Cable 12 C13 482.6 452.5 7240.200
For IEC 320 connectors
with IEC 320 input, 10 A
C14 9 C13 482.6 452.5 7240.201
For IEC 320 connectors
with overvoltage protec-
tion and interference
suppressor filter, 10 A
Cable 6 C13 482.6 452.5 7240.205
With 2 circuits Cable 6 + 6 Earthing-pin 720.6 690.5 7240.370
B/F sockets
(Belgium, France)
B/F sockets
(Belgium, France)
1)
Variable attachment distance within a range of 5 mm, the distance given is hole centre hole centre of
mounting bracket.
Voltage supply
Socket strips
Socket strips
With C13/19 sockets
Socket strips with 2 m connection cable
H05VV-F3G6 1.5 (PVC) with wire end ferrules.
Detailed drawing:
Design
Number of
sockets
Attachment
Length
mm
Mounting
dimension
mm
1)

Model No.
DK
Frame
Wall-mounted
distributor,
horizontal
482.6 mm
(19) level
C13 IEC 320 socket
3)
15 592.6 562.5 7240.130
C13 IEC 320 socket
3)

with 2
2)
infeeds
9 + 9 764.6 734.5 7240.150
C19 IEC 320 socket
4)
6 482.6 452.5 7240.160
C19 IEC 320 socket
4)

with overvoltage
protection device
4 482.6 452.5 7240.170
C19 IEC 320 socket
4)

with 2
2)
infeeds
3 + 3 478.6 448.5 7240.190
All socket strips may also be ordered with a Wieland GST infeed.
1)
mounting bracket.
2)
In order to make allowance for the higher output density e.g. in an IT environment, the socket strips are equipped
with 2 independent infeeds. This means it is possible to supply 2 x 16 A/250 V with one socket strip.
3)
With IEC 320 socket to standard F EN 60 320-2-2
4)
With IEC 320 socket to standard J EN 60 320-2-2
Socket strips 230 V
Rated voltage 250 V AC
Max. load
CH 10 A,
GB 13 A.
Material:
Plastic, halogen-free
Connection cable, 2 m long, without connector
H05VV-F3G1 (CH)
H05VV-F3G1,5 (GB)
Unrestricted use, including angular connec-
tors, thanks to the long row arrangement of
plug-type contacts.
Number of sockets
Length
mm
Design Model No. DK
6 470
1)

GB
7404.000
12 793 7408.510
18 1153 7412.510
2)

6 470
1)

CH
7604.000
2)

12 793 7608.510
2)

1)
The socket strips can be mounted horizontally at the rear of the DK wall-mounted distributor based on EL/AE.
2)
Socket strip TE
8-way socket strip for earthing-pin plug/version D.
The strip is made of plastic and may be mounted
vertically on the TE frame or in the rear 482.6 mm
(19) section. In the 482.6 mm (19) section, more
than 2 U of space is required. The sockets are
arranged at an angle of 45 so that angular con-
nectors are also easily used. The socket strip is
supplied with a 2 m connection cable. The con-
nection cable is contacted in a terminal slot in the
strip.
The terminal slot has a separate cover. The socket
strip has external terminals for separate earthing.
Rated voltage: 230 Volt AC
Rated current: Max. 16 A
Connection cable: Length 2 m, H05VV-F3G1,
1.5 mm
2
, without connectors, with wire end
ferrules
Socket strip TE Model No. DK
8-way, earthing-pin 7000.630
Socket strips
Voltage supply
Socket strip, 482.6 mm (19),
with fuse
with optional locking of the cable outlets
The socket strip constructed from an aluminium
channel, is 482.6 mm (19) wide and 1 U high,
and may be integrated into all standard 482.6 mm
(19) mounting frames.
Special attention has been devoted to practical,
universal fastening. The universal mounting
bracket creates variable mounting opportunities.
For example, the 439 mm long socket strip may
optionally be mounted on the 482.6 mm (19)
mounting angle or on the punched section with
mounting flange and enclosure frame.
Additionally, a locking option for the outgoing
cables to the equipment has now been inte-
grated. This protects the cables from uninten-
tional loosening, which in turn increases the se-
curity and availability of applications.
10 A fuse/slow
Cable type: H05VV
Mains voltage: 250 V
Rated current: 10/10 A
Connection cable: 1.5 m
Supply includes:
Socket strip
Two mounting brackets
Assembly parts
Accessories:
PSM cable lock,
see page 204.
Design Model No. DK
12 x C13 7240.600
Socket strips
with ammeter
The socket strip with ammeter measures the
active power of the connected equipment.
The two variants earthing pin contact and
IEC 320 socket C13 provide the most com-
monly used plug-in contacts in data centres. The
482.6 mm (19) long socket strip may optionally
be mounted on the 482.6 mm (19) mounting
angles, on the 482.6 mm (19) mounting frame,
on the enclosure frame or in the rear section of
wall-mounted distributors. The installation bracket
may be mounted in four different positions for
variable mounting. Without additional mounting
accessories, the socket strip may be inserted into
all sections with a 25 mm pitch pattern.
Material:
Aluminium section: Natural-anodised
Socket inserts: Polycarbonate
Supply includes:
Socket strip
Two installation brackets
Assembly parts
1.5 m connection cable with open ends
Mains voltage: 250 V
Rated current: 16 A
Connection cable: 1.5 m
Design
Number of
sockets
Attachment
Length
mm
Mounting
dimension
mm
1)

Model No.
DK
Frame
Wall-mounted
distributor,
horizontal
482.6 mm
(19) level
Earthing-pin 6 482.6 464.1 7240.300
C13 IEC 320 socket 8 482.6 464.1 7240.305
1)
mounting bracket.
Voltage supply
Socket strips
Socket strip CMC-TC
With integral
interference suppressor filter
Overvoltage protection
Alarm contact
In the event of interference caused by overvolt-
age, the connected active network components
are protected. With the relay message contact,
undervoltage and any malfunctions caused by
overvoltage can be reported via the CMC-TC in
the network (SNMP trap). A green light on the strip
indicates that the device is operational. The sec-
ond protective device is the interference suppres-
sor filter which protects valuable equipment as a
passive component.
Number of sockets: 9
Length of strip: 650 mm
Rated voltage: 230 V AC, 50/60 Hz
Rated current: 16 A
Relay alarm output: RJ 10 jack
Relay load capacity: 50 Volt DC 100 mA
Technical specifications,
overvoltage protection:
Arrester application category: D
Surge current resistance per conductor: 2.5 kA
Maximum surge current resistance: 8 kA
Also required:
For connecting the socket strip, the CMC III or
CMC III Compact and an RJ 10 connection cable
are required.
1 7200.630
Junction box
with multi-functional bracket
The angle bracket can be installed in all network
enclosures in a system-compatible design. The
junction box serves as a transfer point for the
power supply to all equipment (fans, lamps and
socket strips). As well as being used as a junc-
tion box or interchange point, the bracket may
also accommodate the enclosure internal thermo-
stat (SK 3110.000) or the hygrostat (SK 3118.000)
thanks to its integral holes.
Material of bracket:
Sheet steel
Colour of bracket:
RAL 7035
Supply includes:
1 bracket
1 junction box
6 m connection cable 3 x 1.5 mm
2
(flexible)
1 set 7280.035
Socket
For mounting on support rails TS 35/7.5 and
TS 35/15 to EN 60 715
Screw terminals uniformly from one side
Rated voltage: 250 V AC
Rated current (AC): 16 A
Material:
Polyamide
Colour:
Grey
Standards:
DIN VDE 0620-1
DIN 49 440-1
Design Packs of Model No. SZ
Germany 2 2506.100
Socket strips
Voltage supply
Service socket
For enclosure frame attachment/16 A
Integration of a service socket within a separate
supply circuit, independently of the IT network
and UPS.
Simple installation via an angle bracket for attach-
ing to the enclosure frame.
Material:
Angle bracket: Sheet steel
Socket: Plastic
Surface finish:
Angle bracket: Zinc-plated
Supply includes:
Angle bracket
Damp-proof socket (IP 44)
Assembly parts
1 set 7280.100
Energy-Box, 482.6 mm (19)
A depth-variable top hat rail for installed equip-
ment to DIN 43 880, sizes 1 3 (e.g. to accommo-
date built-in sockets, miniature circuit-breakers
etc.). Cable clamping at the rear, one N and one
PE rail on an insulated plinth. Plastic cover includ-
ing extension cover (UL 94-V0), maximum accom-
modation of 22 installed devices (width 18 mm).
Maximum accommodation capacity = 22 HP
(22 x 18 mm = 396 mm).
Colour:
RAL 7035
Supply includes:
Energy-Box with plastic blanking covers.
Note:
Individual population with circuit-breakers at the
factory available on request.
Packs of U Model No. DK
1 3 7480.035
Energy-Box, 482.6 mm (19)
Pull-out
This Energy-Box is designed to accommodate
both DC and AC components. The pull-out com-
ponent front affords optimum access to the wiring
space from above and below.
Connection clamps for DC current:
2 clamps 35 mm
2
,
9 clamps 16 mm
2
(per rail)
for AC current:
1 clamp 16 mm
2
(PE or N),
20 clamps 4 mm
2
(per rail)
Depth-adjustable top hat rail for snap-in attach-
ment of installed equipment to DIN 43 880 in sizes
1 3 (e.g. to accommodate built-in sockets, mini-
ature circuit-breakers etc. or entire installation
assemblies such as the ABB smissline system).
Cable clamping at the rear, two power distribution
rails with connection clamps on isolated base/
plinth. Plastic cover including extension cover,
maximum accommodation of 22 items of installed
equipment (width 18 mm).
Maximum accommodation capacity = 22 HP
(22 x 18 mm = 396 mm).
Depth: 220 mm.
Colour:
RAL 7035
Supply includes:
Energy-Box with plastic blanking covers.
U Model No. DK
3 7480.300
Voltage supply
Socket strips
Rittal Power Control Unit (PCU)
Socket strip, IP-compatible, 1 U
Featuring 8 current outlets with IEC 320 C13 slots.
Each of the 8 slots is individually switchable (via
the CMC III system). Furthermore, a current indi-
cator, circuit display and thermal overload protec-
tion are integrated into the module. Installation on
the enclosure frame or in the 482.6 mm (19) sec-
tion (1 U) of a rack.
Operate the socket strip without CMC:
For operation of the socket strip, power pack
DK 7201.210 and a connection cable are
required. Up to 4 socket strips may be operated
with one power pack.
Available functions: Current display, circuit dis-
play, automatic selective activation.
Operate the socket strip with CMC:
No additional power pack is required: The PCU
is supplied via the CMC III system. You will need
the CMC III or CMC III Compact, plus a CMC III
CAN bus unit. See page 581 for details.
Available functions: Current display, automatic
selective activation via CMC III in the network:
Individual switching of the 8 current outlets,
current limit monitoring, delayed switching of the
individual current outlets, status display of the
module.
Description of functions:
2-digit local LED 7-segment current display on
the PCU. Legibility rotates according to the
installation position.
Measuring and monitoring of the current per
PCU. Min./max. limits may be set.
Measurement range 0 16 A.
Alarm notifications via a flashing display.
Monitoring of the thermo-fuse.
PCUs may be combined via the bus system,
thereby enabling selective activation.
In conjunction with the CMC III, the 8 individual
current outlets of the PCUs may be activated
and deactivated individually via HTTP and
SNMP.
Remote administration of the power supply,
editing and monitoring of remote limits, SNMP
trap messages in case of alarm.
8 IEC 320 C13 slots per PCU.
User administration.
Dimensions:
Width: 465 mm (19)
Height: 44.5 mm (1 U)
Material:
Aluminium section with plastic cover
Supply includes:
1 socket strip PCU 1 U
(max. 10 A per socket strip)
1 bus cable
1 infeed cable 24 V DC
1 adaptor for power pack 24 V DC
1 connector for power supply
1 connection cable 0.3 m with Wieland
connector
Designation Pin pattern
Number
of slots
Switchable
outputs
With individual
current
measurement
Depth
mm
Model No. DK
IEC 60 320 C13 8 yes 60 7200.001
Earthing contact Earthing pin/C13 4/2 yes 60 7856.203
1)

IEC 60 320 C19/C13 4/2 yes 60 7856.204
1)

Earthing contact Earthing pin/C13 4/2 yes 160 7859.215
IEC 60 320 C13 8 yes 160 7859.225
IEC 60 320 C19/C13 4/2 yes 160 7859.235
1)
Also required: PSM busbars, see page 202.
Cable entry
Cable management
Cable entry plates
For
Connector grommets
instead of segments of the standard divided
gland plates.
Material:
Sheet steel
Surface finish:
Zinc-plated
Supply includes:
Assembly parts.
For installation in TS and PC enclosures
For installation in CM enclosures and
TP TopConsole system
For installation in ES enclosures and TP universal
console, CS Basic enclosure
Enclosure
width
mm
Cut-outs
per plate
Packs
of
Model No.
TS
600 5 2 8800.060
800 8 2 8800.080
1000 4 4 8800.100
1200 6 4 8800.120
Enclosure
width
mm
Cut-outs
per plate
Packs
of
Model No.
CM
600 5 1 5001.226
800 8 1 5001.227
1000 4 1 5001.228
1200 6 1 5001.229
1600 8 1 5001.237
Enclosure
width
mm
Cut-outs
per plate
Packs
of
1)

Model No.
TS
600 5 2 4320.700
800 8 2 4321.700
1000 10 2 4323.700
1)
Incl. compensating plate
For TS stainless steel
Material:
For installation in TS, stainless steel
Accessories:
Cable entry grommets,
see page 512.
Enclosure
width
mm
Cut-outs
per plate
Packs
of
Model No.
TS
600 5 2 8700.600
800 8 2 8700.800
1200 6 4 8700.120
Three examples from a wide range of
possibilities
The diagrams show three TS examples for the
positioning of cable entry plates instead of seg-
ments of the three-piece gland plates supplied as
standard. This facilitates positioning to fit the
mounting plate.
Thanks to the enclosure symmetry, where dimen-
sions permit, cable entry plates may also be
inserted in the enclosure depth, right and left,
analogous to the gland plates.
Cable management
Cable entry
In conjunction with the cable entry plate, simple
and fast sealing of cables inserted in the base
area of enclosures.
Material:
Body: Polypropylene
Cover: Thermoplastic elastomer
IP 55 subject to correct mounting.
Cables
per grommet
Max. mm
Packs
of
Model No.
PS
8 13 25 4316.000
3 21 25 4317.000
1 47 25 4318.000
Connector grommets
Suitable for cable diameters from 8 to 36 mm.
Material:
Outer cover: Polypropylene covered with
thermoplastic elastomer
Seal: Cellular rubber
10 4311.000
Section for cable entry, centre
for TS, CM, TP
For top-mounting on gland plates. A superior
alternative to the foam rubber cable clamp strip,
thanks to:
Easier mounting
Full-surface support
High level of sealing of cables inserted into the
enclosure
Material:
Seal: PU foam
Cross-section: 30 x 25 mm
Note:
1 set is sufficient for one base opening up to an
enclosure width of 800 mm.
From an enclosure width of 1000 mm, two base
openings are provided. 2 sets per enclosure may
be fitted.
Accessories:
Cable clamp rails (right angle section),
see page 527
C rail 30/15,
see page 465.
For
enclosure width
mm
600 1 set 8802.060
800 1 set 8802.080
1000 2 sets 8802.100
1200 2 sets 8802.120
1600 2 sets 8802.160
129.5
24.5
2
5
.
5
5
30 x 25
Y
Y = Mounting plate depth-adjustable
on a 25 mm pitch pattern (final pitch 30 mm).
Cable entry
Cable management
Section for cable entry, rear
for TS, CM, TP
Unlike the section for cable entry, centre, the rear
section is mounted directly onto the base open-
ing. In this way, when installing the mounting plate
in the rearmost position (TS) or with CM, the
cables may be routed directly on a cable clamp-
ing rail with no large radii. In conjunction with the
cable clamp rail, optimum adjustment between
the cable entry and mounting plate can be
achieved.
Material:
Seal: PU foam
Note:
1 set is sufficient for one base opening up to an
enclosure width of 800 mm.
From an enclosure width of 1000 mm, two base
openings are provided. 2 sets per enclosure may
be fitted.
Accessories:
Cable clamp rail,
see page 527.
For
enclosure width
mm
600 1 set 8802.065
800 1 set 8802.085
1000 2 sets 8802.105
1200 2 sets 8802.125
1600 2 sets 8802.165
Foam rubber cable clamp strip
For sealing the cable entry between the gland
plates. Particularly suitable for identical cable
cross-sections.
Material:
PU foam
3 m 2573.000
EMC gland plates
see page 499.
Cable management
Gland plates
Plastic gland plates
With metric knockouts
With pre-punched holes for cable glands.
Used for sealing standard gland plates.
Temperature range:
May be used from 40C to +70C.
Colour:
RAL 7035
Note:
The applicable size may be taken from the
respective product ordering page.
1 10 2560.010
3 10 2561.010
4 5 2562.010
5 5 2563.010
7
7
0
5
6
110 25
160
120
330
45 120
7
5
7
.
5
9
0
339
120 120 49.5
8
1
3
3
1
4
9
110 45 110 110 110
530
8
1
3
3
1
4
9
M12
M16
M20
M25
M32
M40
M50
Size 1 Size 3
Size 4 Size 5
339
120 120 49.5
8
1
3
3
1
4
9
With PG knockouts
With pre-punched PG holes for cable glands.
Used for sealing standard gland plates.
Temperature range:
May be used from 40C to +70C.
Material:
ABS
Colour:
RAL 7035
Note:
Size PG Qty. Packs of Model No. KL
2
13.5 12 5 1581.000
13.5
16
21
6
2
2
5 1582.000
PG PG PG PG PG
PG PG PG PG PG
13.5 13.5 13.5
13.5 13.5 13.5
21
21
16
16
PG
13.5
5

7
6
202

7
2
220

9
0
KL 1582.000
KL 1581.000
Gland plates
Cable management
with membranes
Simply pierce the plastic with a sharp object,
and pull through the cable.
Material:
Plastic to UL 94-V0
Colour:
Similar to RAL 7035
IP 65 with careful cable entry.
Note:
6
120
330
7
5
9
0
120 45
7.5
Size 3
339
120
6
1
3
3
1
4
9
120 49.5
8
Size 4
3 1 2561.500
4 1 2562.500
5 1 2563.500
Diameter
mm
Number of cable entries for
Model No. SZ
2561.500 2562.500 2563.500
5 9 18
6 11 17
7 12 24 16
10 15 27 48 36
15 21 2 4
15 24 6
15 25 8
16 25 4
19 34 2
23 30 2
26 35 4 2
26 54 4
50 110 1
534
6
1
3
3
1
4
9
110 47 110 110 110
8
Size 5
Cable management
Gland plates
Metal gland plates
With metric knockouts
Simply knock out the holes for the cable glands
using a screwdriver.
Material:
Sheet steel
Colour:
RAL 7035
IP 66 when mounting in the usual position at the
bottom.
Note:
Number of cable entries
Accessories:
Cable glands made from polyamide or brass,
see page 519.
221
9.5
9
0
7
2
101 101
7
7
6
9
Size 2
7.5 315
9
0
7
5
7
.
5
330
120 120 45
Size 3
49.5 120
339
120
8
1
3
3
1
4
9
8 323
Size 4
2 1 1581.100
3 1 2561.100
4 1 2562.100
5 1 2563.100
Model No.
SZ
Diameter
M12 M16 M20 M25 M32 M40
12 1581.100
9 4 2 2561.100
2 5 13 2 2 2562.100
1 12 11 8 4 2563.100
518 8
534
110 110 110 110 47
1
4
9
1
3
3
8
Size 5
Gland plates
Cable management
Metal gland plates
As spare/replacement part for the standard gland
plates supplied loose.
Material:
Sheet steel
Colour:
RAL 7035
IP 66 when mounting in the usual position at the
bottom.
Note:
Accessories:
Cable glands made from polyamide or brass,
see page 519.
Size Design Packs of
Model No.
SZ/IN/KL
1 Solid 1 2560.400
2 Solid 6 1158.500
3 Solid 1 2561.400
4 Solid 1 2562.400
5 Solid 1 2563.150
160
133
7
0
4
3
330
303
9
0
6
3
339
303
1
4
9
1
1
3
534
500
1
4
9
1
1
3
SZ 2560.400
1
SZ 2561.400
SZ 2562.400
IN 2563.150
KL 1158.500
Area available for population 1
1
1
1
9
0
6
2
192
220
R
9
Gland plate
solid, for QuickBox
To conceal the cable entry openings. In exchange
for the brush strip at the top and bottom that is
used as standard.
Material:
Sheet steel
Colour:
RAL 7035
Supply includes:
Assembly parts.
2 7502.310
Gland plate
for metric cable glands, for EL
Folded gland plate with foamed-in seal and pre-
punched, knock-out holes for metric cable glands
M12, M20, M25, M32, M40.
Material:
Sheet steel, 1.5 mm
Colour:
RAL 7035
IP 55 to IEC 60 529
1 7705.235
2
8
25.5
(5 x)
40.5
(2 x)
2
7
12.5
(4 x)
20.5
(7 x)
32.5
(2 x)
599
1
3
3
.
5
1
9
Cable management
Gland plates
Gland plate
solid, for EL
Folded gland plate for the base box, with foamed-
in seal.
Material:
Sheet steel, 1.5 mm
Colour:
RAL 7035
1 2235.135
599
1
3
3
.
5
19
Gland plate
with brush insert, for EL
Folded gland plate with foamed-in seal and
plastic brush inserts for simple cable entry.
Material:
Sheet steel, 1.5 mm
Colour:
RAL 7035
1 7705.035
19
4
0
390
599
1
3
3
.
5
Brush strip
For individual installation of enclosure panels,
gland plates and panels. Cut-outs for cable
routing at any given positions in the side panel,
rear panel, doors, roof and gland plate may be
finished off attractively by simply attaching the
brush strip.
For metal thickness: 0.6 1.5 mm
Bristle length: 30 mm
Plastic sheathing: 18 mm
Snap-on surface: 10 mm
Maximum cut-out height: 38 mm
2 m 7072.200
Brush strip, super-airtight
For individual installation of enclosure panels,
gland plates and panels. Cut-outs for cable
routing at any position in the side panel, rear
panel, doors, roof and base plate.
These special brush strips may be used to create
airtight entries for cable sections and conductors.
The brush strips arranged in an offset configura-
tion ensure good sealing from the routed cables
even with large quantities of cables. In this way,
unwanted system losses may be reduced to a
minimum.
For metal thickness: 1.5 2 mm
Bristle length: 58 mm
Plastic sheathing: 14 mm
Snap-on surface: 11.5 mm
Cut-out width: 88 90 mm
Material:
Plastic, UL 94-V0
Supply includes:
1 brush strip each, 1 m in length,
right-hand and left-hand version.
2 x 1 m 7825.375
Cable glands
Cable management
3
4
5
2
1
Cable gland, brass
Benefits:
Because the gland and lock nut are sold
together in a single pack, this saves additional
ordering and storage.
Clamping membranes for even tightening and
strain relief which protects the cables.
Insulation via plastic insert.
Optimum seal on the connection thread,
thanks to O-ring.
The lock nut cuts automatically into the spray-
finish, thereby creating a conductive connec-
tion.
Material:
Brass
Seal: Neoprene
Surface finish:
Nickel-plated
IP 68 (5 bar, 30 min.) to IEC 60 529
IP 69K to DIN 40 050-9
Approval:
VDE tested to EN 50 262
Cap nut
Neoprene seal
Plastic insert
O-ring
Lock nut
Possible
alternative:
Cable gland Hygienic Design,
see page 521.
Accessories:
Sealing bungs,
see page 520.
Multi-seal inserts,
see page 520.
1
2
3
4
5
Size
Cable diameter
mm
Packs
of
Model No.
SZ
M12 x 1.5 3 6.5 15 2411.800
M16 x 1.5 4.5 10 15 2411.810
M20 x 1.5 6 12 10 2411.820
M25 x 1.5 11 17 10 2411.830
M32 x 1.5 15 21 5 2411.840
M40 x 1.5 19 28 4 2411.850
M50 x 1.5 27 38 2 2411.860
M63 x 1.5 34 44 1 2411.870
3
4
5
2
1
Cable gland, polyamide
Benefits:
Because the gland and lock nut are sold
together in a single pack, this saves additional
ordering and storage.
Clamping membranes for even tightening and
strain relief which protects the cables.
Spray-moulded sealing lip ensures an optimum
seal against the enclosure.
Trapezoid thread for secure screw-fastening of
the cap nut.
Material:
Polyamide 6, neoprene seal
Colour:
RAL 7035
IP 68 (5 bar, 30 min.) to IEC 60 529
Approval:
VDE tested to EN 50 262
CSA for USA and Canada
Cap nut
Neoprene seal
Trapezoid thread
Sealing lip
Lock nut
Accessories:
Polyamide reducers,
see page 520.
Sealing bungs,
see page 520.
Multi-seal inserts,
see page 520.
1
2
3
4
5
Size
Cable diameter
mm
Packs
of
Model No.
SZ
M12 x 1.5 3 6.5 50 2411.600
M16 x 1.5 4.5 10 50 2411.610
M20 x 1.5 6 12 50 2411.620
M25 x 1.5 11 17 25 2411.630
M32 x 1.5 15 21 15 2411.640
M40 x 1.5 19 28 5 2411.650
M50 x 1.5 27 38 5 2411.660
M63 x 1.5 34 44 3 2411.670
Cable management
Cable glands
Polyamide reducers
for polyamide cable glands
For adapting metric cable glands to larger dia-
meter holes or threads.
Benefit:
Reducer and locking nut are sold together in a
single pack; this saves additional ordering and
storage.
Material:
Polyamide 6 GF30
Colour:
RAL 7035
Note:
Polyamide cable gland,
see page 519.
Thread
Exterior Inside Packs of Model No. SZ
M16 x 1.5 M12 x 1.5 50 2411.550
M20 x 1.5 M12 x 1.5 50 2411.551
M20 x 1.5 M16 x 1.5 50 2411.552
M25 x 1.5 M16 x 1.5 50 2411.553
M25 x 1.5 M20 x 1.5 50 2411.554
M32 x 1.5 M16 x 1.5 50 2411.555
M32 x 1.5 M20 x 1.5 50 2411.556
M32 x 1.5 M25 x 1.5 50 2411.557
M40 x 1.5 M25 x 1.5 25 2411.558
M40 x 1.5 M32 x 1.5 25 2411.559
M50 x 1.5 M40 x 1.5 5 2411.560
M63 x 1.5 M40 x 1.5 5 2411.561
M63 x 1.5 M50 x 1.5 5 2411.562
Sealing bung
for cable glands M20 x 1.5
For use in all situations where pre-installed cable
glands M20 x 1.5 must be kept free for future
installations but properly sealed. Simply loosen
the cap nut, mount the sealing bung, and
retighten.
Material:
Polyamide 6
Colour:
RAL 7035
25 2411.532
Multi-seal inserts
For the secure entry of several individual cables
into a single cable gland.
Material:
Neoprene
Size
Cable
diameter
mm
Number
of cables
Packs
of
Model No.
SZ
M25
3 7 25 2411.504
4 6 25 2411.505
5 4 25 2411.506
6 3 25 2411.507
Cable glands
Cable management
1
2
3
4
5
6
7
Seal
Cap nut
Gripper jaws
Shield spring
(EMC version only)
Clamping ring
Enclosure seal
Base with locator for
assembly tool
1
2
3
4
5
6
7
Cable gland HD
Applications:
Manufacturing and packaging of foodstuffs etc.
Clean room technology (e.g. pharmaceuticals)
Biotechnology
Chemical industry
Benefits:
Smooth, solid exterior surfaces effectively pre-
vent the depositing of harmful micro-organisms.
Much easier, and therefore cheaper to clean
compared with conventional cable glands.
Material:
Cap nut: Stainless steel 1.4305 (AISI 303)
Seal: Conforms to FDA 21 CFR 177.2600
IP 68 (5 bar, 30 min.) to IEC 60 529
IP 69K to DIN 40 050-9
Standard version
EMC version
Size
Cable
diameter
mm
Packs
of
Model No.
HD
M12 x 1.5 3 6.5 5 2410.000
M16 x 1.5 4.5 10 5 2410.010
M20 x 1.5 6 12 5 2410.020
M25 x 1.5 11 17 5 2410.030
Size
Cable
diameter
mm
Packs
of
Model No.
HD
M16 x 1.5 5 10 5 2410.110
M20 x 1.5 6 12 5 2410.120
M25 x 1.5 12 17 5 2410.130
Critical points
with conventional
solutions
Cable entry in front
of seal
No minimum radii
on the hexagon
External thread
Gap caused by
O-ring on the
enclosure surface
1
2
3
4
Hygiene-compatible
design features
Seal directly at the
cable entry
Compliance with
minimum radii on
the hexagon
No external thread
Flush termination
between the cap nut
and the enclosure
1
2
3
4
3
4
2
1
3
4
2
1
Why hygiene-compatible cable glands?
Stainless steel lock nut
To match HD cable glands.
Material:
Size Packs of Model No. HD
M12 x 1.5 10 2410.200
M16 x 1.5 10 2410.210
M20 x 1.5 10 2410.220
M25 x 1.5 10 2410.230
Assembly tool
for HD cable glands
For attaching HD cable glands in an internal
thread or using lock nuts. This can be achieved
either from the inside or from the outside using an
Allen key.
Supply includes:
1 set = Adaptor for sizes from M12 M25.
1 set 2410.290
Cable management
Cable glands
Cable glands
for fibre-optic technology
The common size PG 13.5 has a slotted interior
seal. This allows super-easy cable entry. Ideal for
routing break-out cables, as this eliminates
unnecessary bending of the fibre-optic cables.
Material:
Cable gland: Brass
Inner seal: Soft PVC insert
Surface finish:
Cable gland: Nickel-plated
Fibre-optic
cable gland
Cable
diameter
mm
Packs
of
Model No.
DK
PG 13.5 2 x 3 12 7455.030
Connector gland
for connector cut-outs (24-pole)
For the entry of 2 pre-assembled cables in the
connector cut-out, without dismantling the con-
nector.
For cable diameter from 8 36 mm.
Material:
Enclosure: Plastic
Clamps: Sheet steel
Surface finish:
Clamps: Zinc-plated
Supply includes:
1 set =
2 half-shells, including seals,
with fastening clamp.
1 set 2400.000
Cable gland
for IW worktops
To fit drilled holes 60 mm. For the entry of
cables with pre-assembled connectors, the
rotating flap and cover are easily removed.
Material:
Plastic
Colour:
RAL 7035
Detailed drawings:
1 6902.770
Edge protector
For covering sharp edges of cut-outs. Provides
protection from injuries and prevents damage
to inserted cables. The edge protector is suitable
for material thicknesses of approx. 1.0 2.0 mm,
and may be cut to length individually.
Material:
Plastic PVC
Colour:
Black
10 m 7072.100
Cable glands
Cable management
The Rittal connector gland proves that sometimes
less is more: significantly faster installation, a
flexible sealing system for different cable diame-
ters, and simple cable entry with pre-assembled
cables. Low installation costs, a high degree of
protection and flexible cable management
added value guaranteed with the latest genera-
tion of cable entry solutions from Rittal.
Benefits:
Cable diameters 4 16 mm
Simple cable entry for pre-assembled cables
Individual cables can be added or replaced
without dismantling the sealing frame
Sealing modules remain safely attached to
their cables
Sealing frame
For pre-assembled cables with connectors.
Mounting over 24-pole or 16-pole connector
cut-outs in:
Module plates for TS divider panels
Metal gland plates
Material:
Front panel: Polyamide
Flat seal: CR
Supply includes:
Assembly parts.
Accessories:
Module plates for TS divider panel,
see from page 390.
For modules
20 x 20 mm
For
cut-out
Packs
of
Model No.
SZ
10 24-pole 1 2400.900
8 16-pole 1 2400.910
M4
32
36
1
0
3
8
6
M4
32
36
1
1
2
1
3
0
16-pole 24-pole
Sealing module
To seal cables in conjunction with a sealing frame.
It is possible to combine 20 x 20 mm and
40 x 40 mm sealing modules.
Material:
Hard shell: Polyamide
Seal: TPE 2
Sealing modules 20 x 20 mm
Diameter range Packs of Model No. SZ
4 6 mm 10 2400.920
6 9 mm 10 2400.930
Solid 10 2400.970
Sealing modules 40 x 40 mm
Diameter range Packs of Model No. SZ
9 12 mm 10 2400.940
12 16 mm 10 2400.950
Solid 10 2400.960
Cable management
Cable glands
Connector gland, small
For pre-assembled cables with connectors.
For use with material thickness of up to 4 mm.
Strain relief of the pre-assembled cables can
be achieved with cable ties.
Material:
Plastic
Colour:
RAL 9005
Supply includes:
Assembly parts.
To fit Packs of Model No. SZ
2 cables 6 to 8 mm 1 2400.300
3 cables 4 to 6 mm 5 2400.500
2
1
.
5
11 25
36 3
4
41.5
42
2
2
4
41.5
SZ 2400.500
Mounting cut-out
8
3
5
55
6
3
5
55
SZ 2400.300
Cable gland module
CP-L, 130 mm
Use of the support arm cut-out CP-L, round, with
enclosures mounted on the wall, for sealed cable
entry. May also be mounted retrospectively with
the cables already inserted.
Fitted with T-heads for cable clamping. Particu-
larly well-suited to cables with identical cross-
sections.
Material:
Sheet steel
Surface finish:
Zinc-plated
Supply includes:
Assembly parts.
1 6052.500
70
120
1
0
0

1
3
4
3
5
38.5
25
1
0
0

8
2
1
0

3
9
66
Stepped collar
For wall thicknesses from 1.5 to 4.5 mm
For cable entry, simply cut off at the required level
to match the cable diameter.
Material:
Plastic to UL 94-HB
IP 54 with careful cable entry.
For hole
Sealing range
mm
M20 5 16 100 2899.200
M25 5 21 50 2899.250
M32 13 26.5 25 2899.320
M40 13 34 20 2899.400
Cable management
Cable duct
for vertical TS section
For direct mounting on the vertical enclosure
section.
Width 50 mm
For assembly on a vertical enclosure section in
the area of the side panel.
Width 100 mm
For assembly on two bayed enclosure profiles in
the baying area. Baying brackets and baying
clamps which have already been fitted can be
covered over with the cable duct.
The nominal break points of the members are
also oriented towards combination with the cable
ducts for mounting plates; in addition a further
nominal break at the level of the mounting plate
enables direct insertion into the cable duct.
The cable duct fastening points are co-ordinated
with the TS system hole pattern; elaborate drilling,
as in the case of DIN ducts, is dispensed with.
Depth: 80 mm
Length:
1600 mm (for enclosure height 1800 mm)
1800 mm (for enclosure height 2000 mm)
May be shortened for other enclosure
dimensions
Bar width: 5.5 mm
Slot width: 4.5 mm
Material:
Hard PVC
Flame-resistant, self-extinguishing
Temperature resistant to +60C
Colour:
Similar to RAL 7030
Supply includes:
1 set =
1 cable duct with cover.
Accessories:
Aluminium rivet for attachment,
see page 526.
Width
mm
Height
mm
50 1600 8 sets 8800.570
50 1800 8 sets 8800.520
100 1600 4 sets 8800.540
100 1800 4 sets 8800.510
4.5
5.5
7
1
7
2
5.5 100
4.5
48
2
1
5
6.5
8
1
4 1
6
0
0
/
1
8
0
0
1
5
5
0

=

6
2

x

2
5
/
1
7
5
0

=

7
0

x

2
5
2
5
5
0
6.5
5
5
0
1
5
5
0

=

6
2

x

2
5
/
1
7
5
0

=

7
0

x

2
5
2
5
1
6
0
0
/
1
8
0
0
1
4
8
TS 8800.570/TS 8800.520
TS 8800.540/TS 8800.510
1
2
Cable management
Cable duct
for mounting plate
To fit the cable ducts for vertical TS sections.
If the TS mounting plate is installed in the rear-
most position, the horizontally mounted cable
ducts are flush with the vertical ones.
For external mounting on surfaces.
Material:
Hard PVC
Flame-resistant, self-extinguishing
Temperature resistant to +60C
Colour:
Similar to RAL 7030
Supply includes:
1 set =
1 cable duct with cover.
Depth: 80 mm
Length: 2000 mm, may be cut to length
Bar width: 5.5 mm
Slot width: 4.5 mm
Fixed length
2000 mm
Length (L) mm
Width (B) mm Packs of Model No. TS
30 24 sets 8800.750
40 20 sets 8800.751
60 18 sets 8800.752
80 12 sets 8800.753
100 12 sets 8800.754
8
25
50
25
6
.
5
4
.
5
14
L
14
25 25
50
5
0
6
.
5
4
.
5
8
L
80
B
80
B
Width 30, 40 and 60 mm
Width 80 and 100 mm
Aluminium rivet
For secure assembly of cable ducts in conformity
with the relevant standards. Also suitable for
mounting support rails and punched rails.
To fit:
TS system punchings
Drilled hole 4.5 mm.
Accessories:
Cable ducts for vertical TS section,
see page 525.
Cable ducts for mounting plate,
see page 526.
100 8800.531
Cable management
Cable clamp rails
Mounting angle for TS, ES, PC,
TP universal console, base/plinths
For strain relief with cable entry. Depth-variable
mounting on a 25 mm pitch pattern on the hori-
zontal enclosure section or in side base/plinth trim
panels with assembly bolts.
Material:
Steel
Surface finish:
Zinc-plated
Supply includes:
Assembly parts.
Accessories:
Assembly bolts for base/plinth,
see page 364.
Enclosure width
mm
Length
mm
Packs
of
Model No.
PS
400 385 2 4193.000
600 585 2 4191.000
800 785 2 4192.000
1000 985 2 4336.000
1200 1185 2 4196.000
1600 1585 2 4338.000
1800 1785 2 4339.000
Cable clamps,
for cable clamp rails
For fastening the cables to the cable clamp rails.
Material:
Sheet steel
Surface finish:
Zinc-plated
Supply includes:
Plastic insert.
Possible
alternative:
Rail for EMC shielding bracket and strain relief,
see page 498.
For
cable diameter
mm
Packs of
Model No.
SZ
6 12 25 2350.000
12 16 25 2351.000
14 18 25 2352.000
18 22 25 2353.000
22 26 25 2354.000
26 30 25 2355.000
30 34 25 2356.000
34 38 25 2357.000
38 42 25 2358.000
42 46 25 2359.000
46 50 25 2360.000
Cable clamp rails
C section
for TS, CM, TP
For strain relief with cable entry.
The length of the cable clamp rail is tailored to the
width of the mounting plate. The mounting bracket
included with the supply supports three different
installation situations on the mounting plate:
straight, at a distance of 23 mm from the
mounting plate
straight, at a distance of 10 mm from the
mounting plate
tilted, towards the mounting plate
Material:
Sheet steel
Surface finish:
Zinc-plated
Supply includes:
Two mounting brackets and assembly screws.
Accessories:
Cable clamps for C rails,
see page 529.
1
2
3
For
enclosure width
mm
Length
mm
Packs
of
Model No.
CM
600 499 1 5001.080
800 699 1 5001.081
1000 899 1 5001.082
1200 1099 1 5001.083

2 1

3
Cable management
Cable clamping bracket
For installing in the operating housing with
mounting cut-out CP-L and CP-XL.
Cable clamping optionally via:
Cable clamps
or
Cable tie SZ 2597.000
Commercially available cable ties.
Bracket height = 25 mm with fitted C rail 40 mm.
Material:
Sheet steel
Surface finish:
Zinc-plated
Supply includes:
C rail and screws.
Accessories:
Cable clamps,
see page 529.
Cable ties,
see page 530.
1 set 6052.000
Cable clamp rails
see page 532.
Combination rails
for QuickBox
For cable clamping and routing.
Cables and leads can be fastened to the hammer
heads top and bottom with cable ties. In addition,
the C section of the combination rail will accom-
modate cable clamps with inserts. For producing
a contacting connection, the anodised coating of
the rail must be broken.
Material:
Aluminium
Surface finish:
Anodised
Supply includes:
Assembly parts.
Accessories:
Cable clamps,
see page 529.
Cable ties,
see page 530.
For
enclosure depth
mm
Length
mm
Packs
of
Model No.
QB
300/400 200 6 7502.302
500/600 400 6 7502.304
For
enclosure width
mm
Length
mm
Packs
of
Model No.
QB
600 400 6 7502.304
Cable management
Cascade cable routing
for chassis mounting
for TS
Professional cable routing system for cascading
of cables in several levels of the enclosure depth.
The cables are attached to the C rail by means of
clamps. Suitable for installation on the inner enclo-
sure level.
Material:
Sheet steel
Surface finish:
Zinc-plated
Supply includes:
6 mounting brackets
3 C rails
Assembly parts
Accessories:
for the inner mounting level,
see page 459.
for vertical mounting in the enclosure frame,
see page 464.
Cable clamps,
see page 529.
For
enclosure width
mm
600 3 7831.570
800 3 7831.571
Cable clamps
for C rails
For attaching the cables to the C rails.
Material:
Sheet steel
Surface finish:
Zinc-plated
Supply includes:
Plastic insert.
Note:
C rails,
see from page 465.
For
cable diameter
mm
6 14 25 7077.000
12 18 25 7078.000
18 22 25 7097.000
22 26 25 7097.220
26 30 25 7097.260
30 34 25 7097.300
34 38 25 7097.340
38 42 25 7098.000
42 56 25 7098.100
56 64 25 7099.000
Cable conduit and
cable conduit holder
For secure cable routing e.g. from the enclosure
or mounting plate to the door.
Attachment facility for standard commercially
available cable ties is provided on the cable con-
duit holder, so that cables may be attached upon
entry to/exit from the cable conduit.
Material:
Cable conduit: Polythene
Cable conduit holder: Polyamide
Cable conduit
Cable conduit holder
Internal mm Packs of Model No. SZ
16 25 m 2595.000
29 25 m 2589.000
36 25 m 2596.000
48 25 m 2590.000
For cable conduit
mm
16 20 2593.000
1)

29 20 2591.000
1)

36 20 2594.000
48 20 2592.000
1)
Installation in compact enclosures AE
with universal bracket SZ 2373.000, see page 476.
Cable management
Cable attachment
For professional, secure fastening of cables and
conduits.
For fastening:
Slide into the mounting rail 23 x 23 mm,
Screw-fasten onto the round punchings of the
enclosures, as well as all punched rails and
punched sections.
As the fastening attachments are bayable, sev-
eral fastening attachments, even those of differ-
ent sizes, can be assembled by using just
2 screws.
Material:
Polyamide
Note:
Punched rail 23 x 23 mm,
see page 463.
Also required:
Posidrive raised countersunk screw M5 x 12 mm,
SZ 2488.000, for screw-fastening to the round
system punchings,
see page 478.
For
cable diameter
from to
mm
6 9 50 4319.090
9 12 50 4319.120
12 16 50 4319.160
16 20 50 4319.200
Cable ties
The super-fast solution for fastening cables to the
enclosure profile or mounting system parts.
Simply clip into the round system punchings.
Length
mm
150 100 2597.000
Nylon loop
With the nylon loop, secured cables are easily
released, allowing individual cables to be added
or removed. Ideal for sensitive data cables
(fibre-optic/Cu), as it avoids indentations on the
cable sheathing.
In addition, the nylon loop may be screw-fas-
tened to the round system punchings or attached
using a quick-release fastener.
Colour:
Black
Supply includes:
Quick-release fastener.
Also required:
Screw SZ 2486.500 for screw-fastening to the
round system punchings,
see page 478.
Width
mm
Length
mm
Max. cable
diameter
mm
Packs
of
Model No.
DK
20 130 30 10 7072.220
20 200 50 10 7072.230
20 300 90 10 7072.240
Nylon loop
For tidy cable routing.
Supplied on a reel for cutting to the required
length.
Unlike cable ties,
protects the cable sheathing
easily reopened
reusable
Length
mm
Width
mm
Packs
of
Model No. IN
5000 16 1 2203.400
Cable management
Nylon loop cable holder
self-adhesive
Suitable for universal use in all network enclo-
sures and server racks, wall-mounted enclosures,
mounting plates and gland plates.
Material:
Woven polyamide 6.6
Colour:
Black
Size
length x width
mm
70 x 16 10 7111.350
Cable tie fastener
for round system punchings and VIP 6000
For all commercially available cable ties up to a
tie width of 4.8 mm.
Simply insert into the screw channel and secure
by hammering down the split rivet.
Material:
Polyamide 6.6
100 6059.000
Cable tie fastener
for Comfort Panel, Optipanel and
Compact Panel
For secure cable routing of all standard commer-
cially available cable ties up to a tie width of
4.0 mm.
Simply insert into the T channel and secure by
rotating through 45.
Material:
Polyamide 6.6
100 6059.500
Snap-in cable routing
for clipping into the system punchings
Cable routing suitable for universal use,
for toolless, fast assembly, in two variants:
For locking:
User-friendly opening for cable management
via locating points
For cable diameters 14 19 mm
For system punchings 6.2 mm
For twisting:
User-friendly opening for cable management
For cable diameters 10.2 12.7 mm
For system punchings 4.7 mm
Material:
Polyamide 6.6, self-extinguishing to UL 94-V2
Colour:
Natural
For locking for
system punchings 6.2 mm
10 7111.300
For twisting for
system punchings 4.7 mm
10 7111.310
Cable management
Cable clamp rails
for TS and 482.6 mm (19) mounting frames
The cables may be attached to the cable clamp
rails with cable ties or nylon tapes. The cable
clamp rails are simply located onto the frame
section and may additionally be secured with
a screw.
Material:
Sheet steel
Supply includes:
Assembly parts.
Accessories:
Cable ties,
see page 530.
Nylon loop,
see page 530.
For enclosures
Width mm Depth mm
600 600 4 7828.061
800 800 4 7828.081
1000 1000 4 7828.101
1200 1200 4 7828.121
For enclosures
Width mm Depth mm
600 600 4 7828.062
800 800 4 7828.082
1000 1000 4 7828.102
1200 1200 4 7828.122
Cable clamp rails,
depth-variable
for TS and 482.6 mm (19) mounting frames
For strain relief of the routed cables. The cables
may be attached to the cable clamp rails with
cable ties or nylon tapes.
The cable clamp rails may be located directly on
a 482.6 mm (19) mounting frame horizontally at
the rear or in the enclosure depth between two
mounting frames. An additional screw fastening
secures the unit.
The depth variability of the rails facilitates flexible
adaptation of their length to the existing attach-
ment distance between the two 482.6 mm (19)
mounting frames.
Material:
Sheet steel
Supply includes:
Assembly parts.
Accessories:
Cable ties,
see page 530.
Nylon loop,
see page 530.
Mounting dimension
1)

mm
325 575 4 7858.160
500 895 4 7858.162
1)
Mounting dimensions + 120 mm =
distance between 482.6 mm (19) levels
1
2
Cable clamp, variable
for enclosure-independent mounting
Variable attachment from 450 to 800 mm for flexi-
ble cable clamping in two variants.
Supports attachment to punched sections with
and without mounting flanges and direct screw-
fastening onto mounting plates and other flat
surfaces.
Material:
Supply includes:
Assembly parts.
C rail
T-head rail
1
2
C rail 1 7016.140
T-head rail 1 7016.150
Cable management
Cable manager
For system-compatible cable deflection while
complying with minimal bending radii and to
accommodate surplus cables and excess length.
The elements may optionally be used individually
or in combination for cable routing. They may be
combined into semi-circular or circular elements.
As the mounting distance between the elements
grows larger, the deflection radius of the cables
may optionally be enlarged, or the cable route
designed individually. The option of securing ele-
ments on their straight-edge side supports the
use of corners and edges, to allow protected
cable routing around them.
Mounting clips for use above the arc hold the
routed cables back within the elements. The ele-
ments are also bayable in an axial direction to
allow U-based cable routing to the mounting level,
or channelling of the cable sections.
Material:
Plastic, UL 94-V0
Colour:
RAL 7035
Supply includes:
Mounting clips and assembly parts.
Basic kit 8 7064.100
Maxi kit 20 7064.110
5
0
5
0
4
4 7
5
7
5
Shunting ring, plastic
For flexible cable routing, in two materials and
three size variants.
Option of mounting on the 482.6 mm (19) enclo-
sure and swing frame section of the data distribu-
tor, on all patch panels, on the Rittal Data Rack
and all components on a 25 mm DIN pitch pattern.
1
Polyamide version:
Infinitely variable mounting thanks to a longitudi-
nal slot. The shunting ring DK 7218.035 may also
be used on 1 U patch panels.
Colour:
RAL 7035
Material
Dimensions
mm
Packs
of
Model No.
DK
Polyamide 70 x 44 10 7218.035
Polyamide 105 x 70 10 7219.035
Polycarbonate 95 x 50 10 7228.035
1
1
2
2
Polycarbonate version:
Variable mounting. With 45 attachment, the cable
shunting ring may be attached to a 1 U panel.
Colour:
RAL 7035
Possible
alternative:
Cable management panel, 1 U,
see page 539.
Cable management
Cable shunting ring
For flexible, system-compatible cable routing at
the side of the 482.6 mm (19) mounting frame or
on 482.6 mm (19) mounting angles.
Material:
Supply includes:
Assembly parts.
Dimensions
mm
125 x 85 10 7111.900
125 x 65 10 7111.000
85 x 43 10 7112.000
Anti-twist guard
for cable shunting rings
For individual attachment of cable shunting rings
(DK 7111.000, DK 7111.900, DK 7112.000) to
mounting angles, mounting frames or enclosure
panels. May be mounted on a 25 mm pitch pat-
tern of system punchings on mounting angles
and on the 10.5 x 12.5 mm system punchings of
the 482.6 mm (19) mounting frame. It may be
variably mounted and rotated on the system
punchings in 90 increments.
Form-fit accommodation of the shunting ring into
the integral channel allows large forces to be
accommodated in all directions.
Material:
Plastic
Colour:
RAL 7035
10 7111.100
Shunting ring
To accommodate large quantities of cables.
Shunting ring for side attachment to 482.6 mm (19)
sections and mounting frames in 800 mm wide
network enclosures.
The ring is attached asymmetrically providing
approx. 110 mm free space in front of the
482.6 mm (19) level. This allows even large
quantities of cables to be effectively managed.
Material:
Round steel, zinc-plated
Supply includes:
Assembly parts.
Dimensions
mm
330 x 90/70 4 7220.600
Cable management
1 2
3 4
Fibre-optic shunting rings
The inner body is grooved, and fibre-optic shunt-
ing or jumper cables can be inserted into these.
A rubber ring holds different fibre-optic cables
with diameters of up to 4.5 mm. Strain relief and
bending radius are ensured.
Length: 120 mm.
Material:
Dual compound plastic
Colour:
Exterior: RAL 7035
Interior: Black
Supply includes:
2 rubber rings
Baying kit
Assembly:
The supplied mounting brackets are suitable for
universal use; the fibre-optic cables can be routed
to the patch panel in all directions in various
mounting positions:
At the side, directly on the patch panel
In front of the patch panel
At the side next to the patch panel
In front of the patch panel
Possible
alternative:
Fibre-optic cable management panel, 1 U,
see page 541.
1
2
3
4
2 7116.500
Cable clamp strap
for patch panels
To provide strain relief of incoming or outgoing
data cables. Optionally available with spring
brackets for accommodating and contacting the
cable screen. Connection to the patch panel is by
means of bolts on the panel itself.
Material:
Sheet steel, 2 mm, zinc-plated
Supply includes:
Assembly parts.
Without cable screen contact 1 7610.000
With spring clips for
contacting the cable screen
1 7611.000
System supports
for cable routes
for TS
The depth-variable support system may be
attached to all 800 1200 mm deep TS enclo-
sures with external screw-fastening of the roof
plate. The integral system punchings, for screws
or captive nuts, support the attachment of most
common cable route systems.
Material:
Sheet steel
Surface finish:
Powder-coated
Colour:
RAL 7035
Accessories:
Metal multi-tooth screws 5.5 x 13 mm,
SZ 2486.500,
see page 478.
Captive nuts M6, TS 8800.340,
see page 477.
2 7831.472
Cable management
Cable route on the
mounting frame
The mounting kit facilitates rear, side attachment
of a cable tray to mounting frames inside enclo-
sure systems TE 7000, TS. This allows the integra-
tion of vertical cable management independently
of the enclosure frame.
Material:
Supply includes:
1 cable route 100 mm wide, 1700 mm high,
including mounting kit.
1 7000.685
Cable route, vertical
for TS
For direct attachment between the roof and base
frame of a 2000 mm high frame structure.
Installation position optionally on the inner or outer
mounting level. Route width 200 mm.
With integral system punchings for the attach-
ment of various cable routing aids and hammer-
head attachment for nylon loops and cable ties.
Material:
Supply includes:
Assembly parts.
1 7858.200
Cable route
for TS
For cable routing between two 482.6 mm (19)
mounting angles in bayed enclosure suites
(enclosure width 800 mm, mounting angles fitted
centrally). Suitable for L-shaped and cranked
mounting angles.
Material:
Sheet steel
Colour:
RAL 7035
Supply includes:
Assembly parts.
1 7827.050
Surplus cable holder
For fastening at the rear area of the enclosure,
or at the side of network enclosures. The surplus
cable holder can be attached to all depth stays or
to punched sections and rails with a 25 mm pitch
pattern mounting dimension 150 mm. Units may
also be fastened to each other.
Material:
Sheet steel
Colour:
RAL 7035
W x H x D mm Packs of Model No. DK
280 x 151 x 75 1 7220.500
Cable routing 482.6 mm (19)
Cable management
Cable routing bars
For structured routing of entire cable bundles,
the cable bars may be secured to a variety of
different positions inside the enclosure.
Material:
Support: Sheet steel
Cable routing bars, connection combs: Plastic
Colour:
RAL 9005
Supply includes:
Cable routing bars
Connection combs
482.6 mm (19) attachment
For horizontal cable routing within the distributor
level.
Thanks to their open mounting holes, they can also
be retrospectively slotted onto the 482.6 mm (19)
system punchings of the mounting level at any time
and secured with the existing mounting screws of
the installed components.
U
No.
of connection
combs
4 2 4 7111.224
1 5 10 7111.214
All-round attachment for universal use
For vertical and horizontal cable routing inside the
enclosure or within the distributor level.
U
No.
of connection
combs
4 2 4 7111.222
1 5 10 7111.212
Connection comb
For connecting individual cable routing bars into
complete systems (included with the supply).
Cranked attachment
For mounting angles and mounting frames.
Horizontal, U-based cable routing to the distribu-
tor level.
U
No.
of connection
combs
4 2 4 7111.220
1 5 10 7111.210
Cable management
1
Cable duct
for TS/TE
For laying cable in particularly high packaging
densities (high density network nodes), in the
optical fibre or copper cabling sector.
Large capacity. A wide range of cable routing,
cable clamping, channelling and cross-cabling
options creates the requirements for maximum
port density in the minimum possible space.
Individual U-based cable routing makes it pos-
sible to dispense with additional cable routing via
patch panels within the distributor level, thereby
equipping every U with connection points. This
increases port density by up to 50%.
The removable duct cover, hinged on both sides,
facilitates user-friendly access at any time. The
cable sections are held back by removable cross-
bars to protect them against falling out. Mounting
is either on mounting rails at the sides, and on
mounting angles and mounting frames in the
482.6 mm (19) distributor level. Two ducts may
also be secured back-to-back.
Material:
Cable duct: Sheet steel, spray-finished
Cable routing components: Plastic
Front trim panel: Aluminium, spray-finished
Colour:
RAL 7035
Supply includes:
Hinged front trim panel and assembly parts.
Note:
When using the duct in conjunction with
482.6 mm (19) mounting frames and TS 8,
the inner mounting level in the vicinity of the
cable duct is not available.
Within the duct, additional cable ties may be
attached to accommodate spare cables and for
system-compatible cable deflection.
Accessories:
Cable ties for spare cables:
Size
W x D mm
No. of
U
Packs
of
Model No. DK
95 x 235
24 1 7827.310
42 1 7827.320
4 7827.330 1
1
2
Distributor clip
Material:
Sheet steel
Surface finish:
Zinc-plated
Supply includes:
Assembly parts.
Distributor clip
For structured cable routing of entire cable
bundles, the distributor clip may be secured
to a variety of different positions inside the
enclosure. It may be used for both horizontal
and vertical distribution of the cables.
Distributor clip, horizontal
For mounting angles and mounting frames.
Distribution of cables among the various
height units of the patch level.
1
2
4 7111.252
4 7111.250
1
2
Cable management
Drawer 482.6 mm (19)
to accommodate surplus cables
The 1 U drawer offers a convenient opportunity for
storing surplus cables in an organised, compact
and secure way within the 482.6 mm (19) levels.
With brush strip at the front for cable entry
T-head rail in the rear section for cable clamp-
ing
Ring-shaped kink-free routing of the conduc-
tors on adjustable elements in the interior
May be fitted between two 482.6 mm (19)
levels at a distance of 435 750 mm
Independent from the enclosure system
Both on L-shaped and cranked mounting
angles and mounting frames.
Material:
Sheet steel
Colour:
RAL 7035
Supply includes:
Drawer including telescopic slides and
assembly parts.
Accessories:
Nylon loop DK 7072.220/DK 7072.230,
see page 530.
Distance between levels
mm
435 750 1 7063.200
482.6 mm (19)
For horizontal management of the patch cables,
with 5 cable shunting rings.
Material:
Panel: Sheet steel
Ring: Polyamide
Colour:
RAL 7035
U Ring size mm Packs of Model No. DK
1 70 x 44 1 7159.035
1)

1)
Cable shunting rings supplied loose.
Material:
Panel: Sheet steel
Ring: Polycarbonate
Colour:
RAL 7035
1 95 x 50 1 7255.035
1)

1)
Cable shunting rings supplied loose.
Material:
Panel: Sheet steel
Ring: Steel
Surface finish:
Ring: Zinc-plated
Colour:
RAL 7035
1 105 x 43 1 7257.035
2 125 x 85 1 7257.100
1 43 x 55 1 7257.200
Material:
Panel: Sheet steel
Ring: Steel
Surface finish:
Ring: Zinc-plated
Colour:
RAL 9005
Note:
The sizes given are external dimensions.
1 105 x 43 1 7257.005
2 125 x 85 1 7257.105
1)

1)
Cable management
with cable routing bars
482.6 mm (19)
For horizontal management of the patch cables
with cable routing bars. Opening the individual
cable routing bars allows user-friendly modifica-
tion and extension of the cabling.
Material:
Panel: Sheet steel, spray-finished
Cable routing bars: Plastic
Colour:
Panel: RAL 7035
Cable routing bars: Black
U
Bar depth
mm
No. of
bars/U
Packs of
Model No.
DK
1 Approx. 80 5 1 7257.050
2 Approx. 80 4 1 7257.150
Cable management panel, 2 U
482.6 mm (19)
The cable routing chamber has cut-outs from
above, into which the patch cables can be
inserted. The cable management panel is
equipped with a flap and quick-release fasteners
at the front, for optimum access to the cables.
From the rear, the cables can be inserted via a
cut-out with brush strips. With accommodation
facility for cable clamp straps DK 7610.000 or
DK 7611.000.
Material:
Sheet steel
Colour:
RAL 7035
Accessories:
Cable clamp strap,
see page 535.
U Depth mm Packs of Model No. DK
2 85 1 7158.035
Cable routing channel
482.6 mm (19)
To hold the patching cables.
Material:
Sheet steel
Colour:
RAL 7035
U Depth mm Packs of Model No. DK
1 85 1 7149.135
3 100 1 7149.035
Cable management panel, 2 U
To accommodate fibre-optic and copper cables.
Fibres from the patch panels are placed into the
tray via openings and may be distributed at the
sides. Rounded openings protect the cable
sheathing.
Material:
Sheet steel
Colour:
RAL 7035
U Packs of Model No. DK
2 1 7269.135
Cable management
Cable management duct,
horizontal
482.6 mm (19)
The duct facilitates concealed, simple cable
routing of large quantities of cables to equipment
within the 482.6 mm (19) attachment level.
Large cut-outs ensure convenient, kink-free cable
routing to the components top and bottom.
For simple handling, the entire front panel may be
removed via quick-release fasteners. After attach-
ing the cables, these are held in position via nylon
ties, whilst the duct may be resealed.
Material:
Sheet steel
Colour:
RAL 7035
Supply includes:
5 nylon loops.
2 1 7158.100
3 1 7158.150
1)

1)
Cable tray, 2 U
For side routing and distribution of fibre-optic and
copper cables. In this way, cables inserted into
the roof area may be routed at the side of the
mounting angles in the upper section of the rack.
Depth 85 mm.
Material:
Sheet steel
Colour:
RAL 7035
2 1 7269.235
Fibre-optic cable management
panel, 1 U
482.6 mm (19)
The four fibre-optic cable shunting rings inte-
grated into the front permit optimum management
of up to 48 fibres.
Material:
Panel: Sheet steel
Ring: Dual compound plastic
Colour:
Panel: RAL 7035
Cable shunting rings on the outside: RAL 7035,
black interior
Possible
alternative:
Fibre-optic support guide DK 7116.500,
see page 535.
1 1 7256.035
Cable management
Cable entry panel
482.6 mm (19)
Cut-out 390 x 40 mm (2 U) or 390 x 20 mm (1 U)
with brush insert. With accommodation facility for
cable clamp straps DK 7610.000 or DK 7611.000.
Material:
Sheet steel
Colour:
RAL 7035
Accessories:
Cable clamp strap,
see page 535.
1 1 7140.535
2 1 7150.535
4
1
2
3
Cable routing across the
482.6 mm (19) mounting level
There are various different cable clamping
systems available for system-compatible cable
routing in 482.6 mm (19) systems with one or
two pairs of mounting angles:
Material:
Sheet steel
Surface finish:
Zinc-plated
C rail
for mounting between all pairs of
482.6 mm (19) mouting angles.
1
C rail
Depth
in mm
Packs
of
Model No.
DK
482.6 mm (19) level 6 7016.100
Cable clamp rails
for mounting between all pairs of
482.6 mm (19) mounting angles,
for cable ties.
2
Cable clamp rail
Depth
in mm
Packs
of
Model No.
DK
482.6 mm (19) level 6 7016.110
Cable clamp straps for large swing frames,
and Data Rack,
the cable clamp straps are mounted on the
frame at the rear, whilst the cables are
clamped 250 mm behind the 482.6 mm (19)
mounting angles.
Cable clamp strap for DK-TS mounting
angles,
with side lugs for suspending from the
cranked 482.6 mm (19) mounting angles.
Cable clamping is via cable ties.
Also required:
With L-shaped TS mounting angles,
adaptor DK 7827.300 is additionally required,
see page 488.
3
4
Cable clamp strap for
Depth
in mm
Packs
of
Model No.
DK
Data Rack and
large swing frame
250 6 7016.120
DK-TS mounting angles 100 6 7016.130
Swing frame
Swing frame, small
Installation for 600 mm and 800 mm wide
enclosures
For mounting 482.6 mm (19) equipment.
Material:
Sheet steel
Surface finish:
Zinc-plated
Supply includes:
Cam with double-bit lock insert and parts
for attaching to the installation kit.
Note:
The swing frame stay is required to lock the open swing frame,
see page 548.
Installation
Front,
top/bottom
Set back,
top/bottom
Set back/front,
centre
U
Packs
of
Model No. SR
3 1 2377.030
6 1 2377.060
9 1 2377.090
12 1 2377.120
15 1 2377.150
18 1 2377.180
Also required:
Installation kit 1 set
For enclosure width
600 800
2377.860 2377.880
PS punched
section without
mounting flange,
2 or 4 required
For
enclosure depth
mm Page
400 4 4374.000 464
500 4 4375.000 464
600 4 4376.000 464
800 4 4377.000 464
Support bracket,
2 required per PS punched
section without mounting flange
6 sets 8800.330 473
Accessories
Lock inserts, type D 2484.000 421
1
1
1
2
1
2
1
2
2
1
1
2
Installation kit
for swing frame, small
in ES, TP universal console.
Accessories:
Depending on the installation position:
Support bracket PS 4183.000,
see page 473 and
in accordance with the enclosure depth,
see page 464.
Enclosure width mm Packs of Model No. SR
600 1 set 2377.460
Swing frame
Vario swing frames
Installation for ES and CS modular enclosures,
800 mm wide enclosures
For the installation of 482.6 mm (19) equipment.
Material:
Sheet steel
Colour:
RAL 7035
Supply includes:
Double-bit lock insert and assembly parts.
Installation
Front
1)
,
top
Set back,
top
Set back/front
1)
,
centre
U
Packs
of
Model No. SR
6 1 2004.235
12 1 2008.235
18 1 2011.235
Also required:
PS punched section
with mounting flange
For enclosure
mm Page
400 depth 4 8800.640 464
500 depth 4 8800.650 464
800 width 4 4365.000 464
Accessories
1)
Max. installation depth for enclosure depth 400 mm: 305 mm
Max. installation depth for enclosure depth 500 mm: 405 mm
3 3
4
3
3
3
4
Swing frame
Swing frame, large
Without trim panel, for 600 mm and 1200 mm
wide enclosures
Material:
Sheet steel
Surface finish:
Zinc-plated
Supply includes:
Cam with double-bit lock insert and parts for
attaching to the installation kit.
For TS:
TS punched section with mounting flange 23 x 73 mm,
2 or 4 required
For ES:
PS punched section with mounting flange 23 x 73 mm,
2 or 4 required
Note:
The swing frame stay is required to lock the open
swing frame,
see page 548.
Installation
Full installation,
front/set back
top,
front/set back
centre,
front/set back
For enclosure width mm 600 1200
U
For min. enclosure height
mm
Packs of Model No. SR
22 1200 1 2322.700
31 1600 1 2331.700
36 1800 1 2336.700
40 2000 1 2340.700
45 2200 1 2345.700
Accessories Page
Also required:
Installation kits
For enclosure
Hinge
Load
capacity
Packs of
TS ES CM

130
< 800 N 1985.500 1 set
< 1500 N
2)
1994.835 1 set
< 1500 N
2)
1996.835 1 set
< 1500 N
1)
1996.535 1 set
1)
Installation only possible with the mounting plate slide rail dismantled.
2)
Maximum load 800 N with the TS mounting plate slide rail dismantled.
1
1
2
1
2
1
2
2
2
1
1
1
Installation in
enclosure depth
mm
Packs
of
Model No. TS Page
400 4 8612.140
1)
459
500 4 8612.550 460
600 4 8612.560 460
800 4 8612.580 460
1000 4 8612.500 460
1200 4 8612.520 460
1)
2
Installation in
enclosure depth
mm
Packs
of
Model No. TS Page
400 4 4369.000 464
500 4 4370.000 464
2
Swing frame
Swing frame, large
With trim panel, for 800 mm wide enclosures
Material:
Sheet steel
Surface finish:
Front panel: Zinc-plated
Trim panel: Spray-finished
Colour:
RAL 7035
Supply includes:
Locking rod system with double-bit lock insert
and parts for attaching to the installation kit.
For TS: TS punched section with mounting flange
23 x 73 mm, 2 or 4 required
For ES: PS punched section with mounting flange
23 x 73 mm, 2 or 4 required
Note:
The swing frame stay is required to lock the
open swing frame,
see page 548.
Installation
Full installation,
width 800 mm,
front/set back
top,
width 800 mm,
front/set back
centre (in the height),
width 800 mm
front/set back
Mounting position
side central
With hinge 130/180 180
For enclosure width mm 800
U
For min. enclosure height
mm
22 1200 1 2323.235 2324.235
31 1600 1 2332.235
36 1800 1 2337.235 2338.235
40 2000 1 2341.235 2342.235
45 2200 1 2346.235 2347.235
Heavy-duty version
1)

U For enclosure height mm Packs of Model No. SR
40 2000 1 7858.100
Accessories
Ergoform-S lock systems see page 419
Lock inserts, version A see page 421
Also required:
Installation kits
For enclosure
Hinge
Load
capacity
Packs of
TS ES CM

130
< 800 N 1986.500 1 set
< 1500 N
3)
1995.235 1 set
< 1500 N
2)
1995.835 1 set

180
< 800 N 1986.500 + 1978.200 1 set
< 1200 N
3)
1997.235 1 set
< 1200 N
2)
1997.835 1 set
1)
Load capacity 350 kg, including installation kit, for enclosure height 2000 mm.
2)
Installation only possible with the mounting plate slide rail dismantled.
3)
Maximum load 800 N with the TS mounting plate slide rail dismantled.
1
1
2
1
1
2
1
1
2
2
1
Installation in
mm
Packs
of
Model No.
TS
Page
400 4 8612.140
1)
459
500 4 8612.550 460
600 4 8612.560 460
800 4 8612.580 460
1000 4 8612.500 460
1200 4 8612.520 460
1)
2
Installation in
mm
Packs
of
Model No.
TS
Page
400 4 4369.000 464
500 4 4370.000 464
2
Swing frame
Compact swing frames
for AE
For mounting slide-in electronic equipment,
482.6 mm (19), across the entire height.
Torsionally stiff frame, welded from rectangular
tube and triple-folded support section.
Material:
Sheet steel
Colour:
RAL 7035
Supply includes:
Double-bit lock insert and assembly parts.
Accessories:
41 mm lock insert, version C,
see page 421.
Detailed drawings:
Width mm 600 600 600/760
Height mm 380 600 760
U 6 11 14
Packs of 1 1 1
Model No. SR 2026.200 2027.200 2034.200
Pull-out frame, 482.6 mm (19)
for TS
For the installation of a pull-out 482.6 mm (19)
front. For 600 and 800 mm wide TS enclosures,
from a depth of 800 mm.
Overall depth: 525 mm
Extension piece: 500 mm
Distance: 300 mm
Load capacity:
50 kg
Colour:
RAL 7035
Supply includes:
Telescopic slides and assembly parts.
Note:
The slide rail DK 7963.310 (see page 560) can be
mounted directly in the pull-out frame to support
heavy equipment.
12 1 7124.035
1
2
Divider kits
for pull-out frame
Enclosure depth
mm
Packs of
For enclosure width
600 mm 800 mm
Model No. TS
TS punched section
800 4 8612.080
1000 4 8612.000
Depth stays
800 4 7827.800
1000 4 7827.000
1
2
Swing frame
Swing frame stay
Holds the swing frame in the open position.
For mounting on:
Swing frame, large
SR 1979.200, at the top of the enclosure
SR 1980.200, at the bottom of the enclosure
(with safety stop at 160)
with 130 hinge 5 1979.200
with 180 hinge 1 1980.200
For mounting on:
Swing frame, small
SR 1979.200, may be mounted at the top or
bottom of the installation kit.
Slide rails
To support heavy slide-in electronic equipment,
482.6 mm (19) in the swing frame.
Material:
Sheet steel
Surface finish:
Zinc-plated
For slide-in equipment
with max. installation depth
D max. < 190 mm 10 1962.200
D max. > 190 mm 10 1963.200
Mounting angles
Mounting angles,
482.6 mm (19)
for TS, CS Toptec
Available in two versions:
Cranked
The integral U markings in the front facilitate
systematic assembly within the 482.6 mm (19)
attachment level.
L-shaped
The L-shaped mounting angles accommodate the
installation kits of server systems. The integral U
markings in the front facilitate systematic assem-
bly within the 482.6 mm (19) attachment level.
2 mm sheet steel
Integral 482.6 mm (19) punchings
(EIA standard)
Side round and square punchings
Clear chromated for conductive connection of
the 482.6 mm (19) installed equipment.
Supply includes:
Assembly parts.
Explanation of the mounting dimensions in
interior installations: See page 550.
Cranked
L-shaped
Note:
The mounting angles can also be used to accom-
modate 21, 23 and 24 attachment dimensions.
Also required:
TS punched sections with mounting flanges
or depth stays as installation kit for
mounting angles,
see page 555 556.
For L-shaped mounting angle variant:
for mounting slide rails or component shelves:
Adaptor DK 7827.300,
see page 488.
Full installation
rack height
mm
800 15 2 7827.080
1000 20 2 7827.100
1200 24 2 7827.120
1400 29 2 7827.140
1600 33 2 7827.160
1800 38 2 7827.180
2000 42 2 7827.200
2200 47 2 7827.220
Full installation
rack height
mm
600 11 2 7827.061
800 15 2 7827.081
1000 20 2 7827.101
1200 24 2 7827.121
1400 29 2 7827.141
1600 33 2 7827.161
1800 38 2 7827.181
2000 42 2 7827.201
2200 47 2 7827.221
Mounting angles, metric
for TS
The L-shaped mounting angles accommodate
metric assemblies and components. Depending
on the installation kit, mounting dimensions
465 mm and 515 mm can be configured.
Material:
Sheet steel
Surface finish:
Zinc-plated
Supply includes:
Assembly parts.
Also required:
TS punched sections with mounting flanges or
depth stays as installation kit for mounting angles,
see page 555 556.
Full installation
rack height
mm
SU Packs of Model No. DK
17 2 7831.611
1)

1000 37 2 7831.621
1)

1200 43 2 7794.420
1)

1600 59 2 7794.740
1)

2000 76 2 7831.631
2200 84 2 7831.641
1)

1)
Mounting angles
Mounting frame, 482.6 mm (19)
for TS, CS Basic and modular enclosures
The welded 482.6 mm (19) mounting frame
may be attached with complete depth variability
and is used to structure the front and rear
482.6 mm (19) level.
The mounting frame has the same system punch-
ings as the TS 8 enclosure section at the sides
and rear, and therefore supports the mounting of
various TS 8 system accessories such as cable
clamp rails, cable shunting rings etc.
Load capacity:
Up to 1000 kg static load, with even load distri-
bution on two 482.6 mm (19) mounting frames,
with full installation.
Material:
Sheet steel
Surface finish:
Zinc-plated
Supply includes:
Assembly parts.
Note:
A combination of 482.6 mm (19) mounting frame
plus fan mounting plate is not possible. For active
ventilation, we recommend use with modular fan
roof.
Accessories:
Captive nuts,
see page 567.
Assembly screws,
see page 478.
Cable clamp rails TS,
see page 532.
C rails,
see page 465.
Component shelves,
see from page 480.
Fan roof, modular,
see page 223.
TS divider kit, heavy-duty, width/depth-variable,
see page 555.
For enclosures
U
Packs
of
Model No.
DK
Width
mm
Height
mm
600 600 11 1 7856.710
600 1200 24 1 7856.713
600 1800 38 1 7856.716
600 2000 42 1 7856.719
600 2200 47 1 7856.722
800 1200 24 1 7856.725
800 1800 38 1 7856.728
800 2000 42 1 7856.731
800 2200 47 1 7856.734
Explanation of the mounting dimensions in interior installations
A
B
C
A
B
C
Cranked section
= Clearance width
= Mounting dimension
= External dimension of the
rack-mounted equipment or
of the front panels
A
B
C
A
B
C
Mounting frame
Installation
width

mm

mm

mm
19 450 465 482.6
21 500 515 533.4
23 552 567 584.2
24 577 592 609.6
10/39 HP 221.4 236 254
1
/2 19/42 HP 236.6 251.2 269.2
9.5 208.7 223.3 241.3
18 SU 450 465 485
20 SU 500 515 535
A B C
>
>
>
>
>
>
>
>
>
L-shaped section
Mounting angles
Adaptor sections,
482.6 mm (19)
for TS
For the installation of subracks and other equip-
ment.
Adaptor sections are easily shortened for partial
assemblies.
Supply includes:
Assembly parts.
Note:
The 482.6 mm (19) measurement is obtained
when mounting on the TS frame for enclosures
with width 600 mm.
Accessories:
Infill panels, see page 552.
Captive nuts, see page 477.
Assembly screws, see page 478.
Slide rails with one-sided mounting,
see page 561.
Slide rails with two-sided mounting,
see page 561.
Drawer installation kit, see page 563.
Component shelf installation kit, see page 488.
For enclosure system TS
1)

mm
Material U Packs of Model No. TS
1600
33 4 8613.060
1800 38 4 8613.080
2000 42 4 8613.000
2200 47 4 8613.020
For PC enclosure
2)
17 4 8613.070
1)
For the rear of electronic enclosures, see page 552.
2)
Behind bottom door.
1
3
6
3
4
3
4
6
3
7
5
.
5
1
Drawing 1 and 2:
Adaptor section or adaptor
piece fitted in the foremost
installation position, directly
on the vertical section.
When installing slide rails with
two-sided mounting (see
page 561), the same adaptor
sections or adaptor pieces
must also be mounted on the
vertical section at the rear.
Drawing 1 Drawing 2
Assembly examples of TS:
3
5
6
6
8
6
1
2
4
8
6
9
8
.
5
1
2
Drawing 3:
Mounting on two vertically
installed PS punched sections
permits fully flexible use of the
enclosure depths.
Drawing 4 and 5:
Greater distance from the door
is achieved by mounting on
adaptor rails for PS compati-
bility.
In this position, the slide rails
can be fitted with one-sided
mounting.
Drawing 3 Drawing 5
Drawing 4
Adaptor section/piece
Adaptor rail
TS sheet steel door
TS glazed door
Punched section without
mounting flange
1
2
3
4
5
Mounting angles
Adaptor pieces, 482.6 mm (19)
for TS, ES
The 1 U sub-section of adaptor sections.
For the installation of individual subracks and
other equipment.
Supply includes:
Assembly parts.
Assembly examples:
May be found on page 551.
Note:
The 482.6 mm (19) measurement is obtained
when mounting on the TS/ES frame for enclo-
sures with width 600 mm.
Adaptor set (DK 7246.100) for 800 mm wide
enclosures, see page 562.
For TS
For ES
Accessories:
Captive nuts,
see page 477.
Assembly screws,
see page 478.
see page 561.
Drawer installation kit,
see page 563.
Component shelf installation kit,
see page 488.
U Packs of Model No. TS
1 4 8613.010
U Packs of Model No. PS
1 8 4547.000
Adaptor sections,
482.6 mm (19)
for rear installation in TS electronic enclosures
For installing subracks at the front and back,
and for attaching the slide rails TS 8613.150,
TS 8613.160 and TS 8613.180 (see page 561).
Assembly is carried out on the inner mounting
level.
The outer mounting level can, e.g. still be used
for cable routing on depth-mounted TS punched
sections with mounting flange.
Material:
Supply includes:
Assembly parts.
Note:
Design similar to adaptor sections, 482.6 mm (19)
(see page 551), but asymmetrical height, suitable
for TS electronic enclosure.
Accessories:
Captive nuts,
see page 477.
Assembly screws,
see page 478.
see page 561.
Drawer installation kit,
see page 563.
Component shelf installation kit,
see page 488.
Possible
alternative:
see page 552.
For
enclosure height
mm
U Packs of Model No. TS
1600 33 2 8613.360
2000 42 2 8613.300
Infill panels, 482.6 mm (19),
horizontal
for adaptor sections
To infill between installed 482.6 mm (19) equip-
ment positioned in the full enclosure height and
the enclosure clearance height.
Material:
Supply includes:
Assembly parts.
mm
1600/2000 2 8613.040
1800/2200 2 8613.030
Mounting angles
Mounting angles,
482.6 mm (19)
for CS basic and modular enclosures
For mounting 482.6 mm (19) components in Out-
door enclosures. The mounting angles are depth-
adjustable on a 25 mm pitch pattern. An installa-
tion bracket is required to attach the mounting
angles.
Material:
Sheet steel
Surface finish:
Zinc-plated
Supply includes:
Assembly parts.
Also required:
Installation bracket PS,
see page 553.
Enclosure height
mm
U
Packs
of
Model No. DK
800 15 2 7685.000
1200 24 2 7688.000
Depth stay for PS
For mounting angles 482.6 mm (19)
Material:
Sheet steel
Surface finish:
Zinc-plated
Enclosure width
mm
Packs of
Model No.
DK
600/1200 2 7696.000
800 2 7698.000
Mounting angles,
482.6 mm (19)
for DK-EL
This mounting angle kit allows you to integrate a
second 482.6 mm (19) level into EL enclosures.
Material:
Sheet steel
Colour:
RAL 7035
Supply includes:
Assembly parts.
6 2 7705.706
9 2 7705.709
12 2 7705.712
15 2 7705.715
18 2 7705.718
21 2 7705.721
Mounting angles
Mounting angles,
482.6 mm (19)
for QuickBox
For the installation of 482.6 mm (19) rack-
mounted equipment.
Material:
Sheet steel
Colour:
RAL 7035
Supply includes:
Assembly parts.
For enclosures
U
12 2 7502.203
15 2 7502.204
18 2 7502.205
21 2 7502.206
Mounting angles,
482.6 mm (19)
for FlatBox
L-shaped bracket as 2nd attachment level.
Material:
Sheet steel
Supply includes:
Assembly parts for fast, toolless assembly.
Note:
The 2nd attachment level should always be
ordered in the same height as the basic enclo-
sure. Partial configuration is not possible.
6 2 7507.706
9 2 7507.709
12 2 7507.712
15 2 7507.715
18 2 7507.718
21 2 7507.721
Mounting angles,
482.6 mm (19)
for VerticalBox
For mounting at the side of the VerticalBox. With
these mounting angles, instead of 5 U vertically
at the side, up to 10 U may be used horizontally
if only a minimal installation depth is required.
Infinitely depth-variable positioning.
Material:
Colour:
RAL 7035
Supply includes:
Assembly parts.

Note:
10 usable U.
U Packs of Model No. QB
12 2 7502.203
Adhesive measurement strip,
482.6 mm (19)
Made from robust aluminium foil, guarantees easy
handling and durability. With numerical labelling
on a 482.6 mm (19) pitch pattern for clear identi-
fication of the various height units. The double-
sided labelling allows the counting direction to be
freely selected, up to a maximum of 56 U. In this
way, clear documentation of the various mounting
parts is easily achieved.
Material:
Aluminium foil
Labelling range U Packs of Model No. DK
1 56 1 7950.100
Mounting angles/Mounting kits for mounting angles
TS mounting kit, heavy-duty,
width-/depth-variable
for mounting frame 482.6 mm (19) in TS,
CS basic and modular enclosures
Installation in enclosure width 800 mm
The mounting kit allows depth- and width-variable
installation of a 600 mm wide mounting frame,
482.6 mm (19), in 800 mm wide enclosures.
Load capacity:
750/1500 kg static load per level/
per enclosure
Material:
Sheet steel
Surface finish:
Zinc-plated
Supply includes:
Assembly parts.
1 set 7827.590
Additional
fastening attachment
for mounting angles
for 800 mm wide TS network enclosures
The additional fastening attachment counteracts
bending of the mounting angles mounted on
installation brackets in case of unevenly distri-
buted loads. It is attached directly to 482.6 mm
(19) mounting angles and to the punched sec-
tion with mounting flange fitted in the depth
(inner mounting level).
Material:
Sheet steel
Supply includes:
Assembly parts.
Also required:
TS punched section with mounting flange for the
inner mounting level,
see page 459 460.
2 7284.135
TS punched section
as installation kit
For
Mounting angles, 482.6 mm (19)
Mounting angles, metric,
Mounting dimension 465 mm
The installation kit consists of 4 TS punched sec-
tions with mounting flange 17 x 73 mm to accom-
modate mounting angles. One pack is sufficient
for installing one or two 482.6 mm (19) attach-
ment levels. For exceptionally heavy installed
equipment, we recommend the installation of
additional punched sections in the centre.
Material:
Sheet steel
Surface finish:
Zinc-plated
Supply includes:
Assembly parts.
For enclosures
Width
mm
Depth
mm
600 600 4 8612.060
600 800 4 8612.080
600 1000 4 8612.000
600 1200 4 8612.020
Mounting kits for mounting angles
Depth stays for TS
for mounting angles into TS, 482.6 mm (19)
Depth stays are screw-fastened to the enclosure
frame in the enclosure width.
The mounting angle is attached to the depth stay
at the top and bottom. The bracket ensures opti-
mum clearance at the sides for cable routing. For
partial enclosure configuration, the depth stays
may be attached to the TS punched sections with
mounting flanges 17 x 73 mm on the outer attach-
ment level of the enclosure frame. Fully depth-var-
iable attachment is facilitated by the attachment
slots. Either cranked or L-shaped mounting
angles may be used.
Material:
Sheet steel
Surface finish:
Zinc-plated
Supply includes:
Assembly parts.
Accessories:
For partial installation,
17 x 73 mm,
see page 459 460.
Mounting angles, cranked or L-shaped,
see page 549.
Installation position Packs of Model No. DK
central 2 7827.480
side 2 7827.490
TS installation kit,
width-variable
482.6 mm (19)/metric in TS
Universal depth stays to which both L-shaped and
cranked mounting angles may be variably
mounted in the depth and width.
Divider kit for all width dimensions
Imperial mounting dimensions 19/21/23/24
Metric mounting dimensions 18/20 SU
Load capacity:
200 kg static load per level
Material:
Sheet steel
Surface finish:
Zinc-plated
Supply includes:
Assembly parts.
Accessories:
see page 549.
For enclosure depth
mm
800 1 set 7827.550
1000 1 set 7827.560
1200 1 set 7827.570
1 set = 4 stays
Depth stays as installation kit
for mounting angles, 482.6 mm (19)
One installation kit consists of 4 depth stays to
accommodate mounting angles. One pack is
sufficient for installing one or two 482.6 mm (19)
attachment levels. For exceptionally heavy
installed equipment, we recommend the installa-
tion of an additional depth stay in the centre. The
front cut-out makes cable routing easier with full
configuration
Material:
Sheet steel
Surface finish:
Zinc-plated
Supply includes:
Assembly parts.
Possible
alternative:
Depth stays for TS for mounting angles,
see page 556.
For enclosures
Width
mm
Depth
mm
800 600 4 7827.600
800 800 4 7827.800
800 1000 4 7827.000
Mounting kits for mounting angles
for mounting angles, 482.6 mm (19),
mounting dimensions 23 and 24
When using depth stays in 800 mm wide enclo-
sures, attachment spacings of 23 and 24
are achieved. Either cranked or L-shaped,
482.6 mm (19) mounting angles may be used.
Material:
Sheet steel
Surface finish:
Zinc-plated
Supply includes:
Assembly parts.
Mounting dimension 23
Mounting dimension 24
Accessories:
Mounting angles, cranked or L-shaped,
see page 549.
For enclosures
Width
mm
Depth
mm
800 800 4 7827.823
800 1000 4 7827.023
For enclosures
Width
mm
Depth
mm
800 800 4 7827.824
800 1000 4 7827.024
Mounting frame 54 U
for TS
The mounting frame allows configuration of a
side-offset 482.6 mm (19) level with 42 U useful
installation space plus the additional integration of
a further 12 U for vertical installation at the side.
The additional side extension is divided into three
installation levels arranged on top of one another,
each with 4 U.
The mounting frame may be installed at either the
front or rear.
Material:
Sheet steel
Surface finish:
Mounting bracket: Zinc-plated
Side trim panel: Spray-finished
Colour:
RAL 7035
Supply includes:
12 U mounting trim at the side.
Also required:
see page 549.
For enclosures Additional
vertical
installation
area
Packs
of
Model No.
DK
Width
mm
Height
mm
800 2000 12 U 1 set 7827.554
Mounting kit, 2 U
for 482.6 mm (19) equipment
Facilitates fast, simple integration of additional 2 U
mounting space within an enclosure by attaching
to the enclosure frame or to the existing mounting
angles at the sides. The flexible slot fastening of
the brackets means that the distance between the
two installation brackets may be freely selected,
so that other 482.6 mm (19) attachment dimen-
sions may be implemented. The second row of
holes is used for the optional configuration of
additional mounting surfaces.
Material:
Sheet steel
Surface finish:
Zinc-plated
Supply includes:
Assembly parts.
2 7246.420
Accessories for Data Rack
Second pair of mounting
angles
To accommodate 482.6 mm (19) network compo-
nents or for the attachment of component shelves
and slide rails.
482.6 mm (19) punched profile at the front,
hole centre distance 465 (470 mm at the rear),
tailored to the attachment of patch panels and
cable routing rails.
The mounting level may be positioned on a
Minimum distance between levels 150 mm,
maximum distance between levels 350 mm.
Material:
Sheet steel, 2 mm
Colour:
RAL 7035
Supply includes:
1 torsionally stiff profile frame
Detailed drawing:
31 1 7296.000
36 1 7297.000
40 1 7298.000
45 1 7299.000
50 mm pitch pattern
min. 150 max. 350
Baying connector
For assembling rows of distributor frames,
or for cable routing between data racks.
Length: 53 mm
Colour:
RAL 7035
3 7494.000
Roof plate with cable route
For optimised use of the Data Rack as a corridor
distributor or cable management rack. The size
of individual cable routes may be individually
dimensioned by sliding the guide plates. On all
Data Racks, the roof plate can be attached with
two mounting levels and a distance between the
levels of 350 mm.
Material:
Colour:
RAL 7035
Supply includes:
Roof plate
1 7411.000
Depth stays
For securing and stabilising two pairs of
482.6 mm (19) mounting angles in the Data Rack.
The length of the depth stays is adjustable,
and can accommodate the following spacings
of mounting angles: 250, 300 and 350 mm.
Material:
Colour:
RAL 7035
2 7401.000
Continuous slide rail
for two pairs of mounting angles,
482.6 mm (19)
To support heavy equipment in the Data Rack.
The mounting dimensions of the slide rails were
selected to enable them to be combined with
500 mm deep, 482.6 mm (19) component
shelves. The mounting distance of the 482.6 mm
(19) mounting angles is 350 mm.
Requirements:
Second pair of mounting angles
Material:
Accessories:
Component shelves, 500 mm deep,
see page 482.
2 7402.000
Slide rails
1
1
.5
7
.5
Slide rails, depth-variable, 1 U
for TE, 482.6 mm (19) mounting frame,
flat mounting angles
The slide rail is pulled out to the required length
and secured between the front and rear mounting
level. Rear location lugs and front screw-fasten-
ing enable convenient one-man assembly. The
mounting component to be integrated is inserted
horizontally onto the slide rail and optionally
secured to the mounting level via its attachment
slots.
Load capacity:
80 kg/150 kg, static load
Material:
Sheet steel
Surface finish:
Zinc-plated
Supply includes:
Assembly parts.
Note:
The super-slimline design of the slide rail allows
it to be used in most integration cases for
482.6 mm (19) mounting components. Because
it is secured to the standardised mounting level,
it is manufacturer-independent.
The slide rail slightly reduces the installation
space below the slide rail so that the U below it
is only available for limited use.
Length
mm
Load
capacity
kg
Contact
surface
mm
Packs
of
Model No.
DK
390 600 80 50 2 7063.882
590 930 80 50 2 7063.883
590 930 150 25 2 7063.884
Slide rails, depth-variable, 1 U
for server and network enclosures
with two 482.6 mm (19) mounting levels,
without additional loss of U
For mounting both on cranked and flat mounting
angles, 482.6 mm (19) mounting frames and on
TE. The slide rails are pulled out to the required
length and secured between the front and rear
mounting level on the 482.6 mm (19) pitch pat-
tern.
Load capacity:
20 kg static load
Material:
Sheet steel
Surface finish:
Zinc-plated
Supply includes:
Assembly parts.
Note:
Thanks to the thin support surface of only around
0.8 mm thickness, exceeding the U pitch pattern
is generally avoided, provided the components do
not exceed a maximum height of 43.5 mm. In this
way, several units may be easily arranged on top
of one another without offset.
Distance
between
19 levels
mm
Contact
surface
mm
390 550 30 2 7063.750
550 750 30 2 7063.752
Slide rails
Slide rails, heavy-duty
for TS network enclosures
with two 482.6 mm (19) levels
To support heavy installed equipment. The slide
rails are simply located into the cranked mount-
ing angles and secured with screws. The com-
bined use with additional depth stays or, in case
of 80 mm wide enclosures, with the additional fas-
tening attachment counteracts possible bending
of the mounting angles in case of unevenly distri-
buted loads.
Load capacity:
80 kg, static load
Material:
Sheet steel
Surface finish:
Zinc-plated
Supply includes:
Assembly parts.
Note:
Not suitable for use in 482.6 mm (19) mounting
frames.
Also required:
For fastening to L-shaped TS mounting angles:
Adaptor DK 7827.300,
see page 488.
Distance
between
19 levels
mm
Contact surface
Packs
of
Model No.
DK
Width
mm
Depth
mm
55 152
1)
2 7063.000
298 55 261 2 7492.300
398 55 361 2 7492.400
498 55 461 2 7492.500
598 55 561 2 7492.060
698 55 661 2 7492.070
1)
Side leg height 72 mm.
Load capacity: 50 kg, static load.
Slide rails
for TE, 482.6 mm (19) mounting frame
For mounting between a front and a rear pair of
mounting angles. The slide rails can be used to
support heavy 482.6 mm (19) components.
Load capacity:
80 kg, static load
Material:
Sheet steel
Surface finish:
Zinc-plated
Supply includes:
Assembly parts.
Possible
alternative:
Slide rail, depth-variable,
see page 559.
Distance
between
19 levels
mm
Contact surface
Packs
of
Model No.
DK
Width
mm
Depth
mm
395 85 324 2 7963.310
495 85 424 2 7963.410

595 85 524 2 7963.510
695 85 624 2 7963.610
795 85 724 2 7963.710
Slide rails, heavy-duty
for TS, TE
With L-shaped mounting angles or 482.6 mm (19)
mounting frame and a clearance between levels
of 740 mm.
Easily and quickly installed thanks to locating
brackets for the rear level.
Load capacity:
100 kg, static load
Material:
Sheet steel
Surface finish:
Zinc-plated
Supply includes:
Assembly parts.
Distance
between
19 levels
mm
Contact surface
Packs
of
Model No.
DK
Width
mm
Depth
mm
740 50 734 2 7063.740
Slide rails
Slide rails
for TS mounting angles
With two-sided mounting between the
482.6 mm (19) front and rear adaptor sections
or 482.6 mm (19) adaptor pieces.
Material:
Sheet steel
Surface finish:
Zinc-plated
Supply includes:
Assembly parts.
Also required:
Adaptor sections, 482.6 mm (19),
see page 551, or
see page 552.
For
enclosure depth
mm
500 10 8613.150
600 10 8613.160
800 10 8613.180
Slide rails
for TS mounting angles
With one-sided mounting on the 482.6 mm (19)
adaptor sections.
Material:
Sheet steel
Surface finish:
Zinc-plated
Supply includes:
Assembly parts.
Also required:
see page 551.
Length
mm
185 10 4530.000
270 10 4531.000
Adaptor kit, 3 U
for 800 mm wide TS enclosures
For fastening individual 482.6 mm (19) compo-
nents, or as an additional mounting facility at the
rear of the enclosure. The mounting level in the
adaptor angle can be adjusted in 25 mm incre-
ments by up to 100 mm in the depth, leaving
sufficient space for baying where patch panels
or splicing boxes are used. Attachment is on
the inner mounting level of the frame section or
a suitable chassis in the enclosure depth.
Material:
Sheet steel
Colour:
RAL 7035
Height
Mounting
position
Packs of
Model No.
DK
3 U central 2 7246.100
Adaptor, 3 U
Depth offset 100 mm
This adaptor is used to recess 482.6 mm (19)
mounting of equipment inside enclosures with
482.6 mm (19) installation in the foremost posi-
tion, such as server or electronic enclosures. In
this way, sufficient space can be gained in front
of the mounting equipment to integrate patch
panels or switches, whilst at the same time
exploiting the maximum enclosure depth.
Material:
Sheet steel
Surface finish:
Zinc-plated
Supply includes:
Assembly parts.
2 7246.400
Adaptor, metric to 21/19
With this adaptor, 482.6 mm (19) assemblies may
be fastened to metric (535 mm) mounting angles,
or combined systems may be configured.
Material:
Supply includes:
Assembly parts.
SU U Packs of Model No. DK
2 1 2 7246.010
6 3 2 7246.030
11 6 2 7246.060
Drawer, 2 U, 3 U
for a 482.6 mm (19) mounting level
For front attachment to mounting angles,
482.6 mm (19). With cover and telescopic slides
to accommodate assignment lists, operating
manuals and small parts. The small version of the
2 U variant is also suitable for mounting inside a
swing frame.
Material:
Sheet steel
Colour:
RAL 7035
Supply includes:
Fully assembled, including assembly parts.
Height
Clearance
openings
Installation
depth
mm
Packs
of
Model No.
DK
Width
mm
Depth
mm
2 U 411 244 250 1 7282.135
2 U 411 419 427 1 7282.035
3 U 411 419 427 1 7283.035
Drawer for 482.6 mm (19)
with adaptor sections
For keyboards, operating manuals etc. The per-
forated plate in the base helps air to circulate in
the enclosure. Load capacity 50 kg. The 1 U
drawer can be installed rotated through 180
about its longitudinal axis, allowing it to be used
as a utility table.
Material:
Drawer: Aluminium
Telescopic slides: Sheet steel
Surface finish:
Drawer: Anodised
Telescopic slides: Zinc-plated
Supply includes:
Telescopic slides.
Also required:
Installation kit for enclosure system,
see page 563.
U Packs of Model No. PS
1 1 4541.000
3 1 4542.000
Installation kit
for component shelves and drawers,
with 482.6 mm (19) installation in TS
For installation between the front and rear adap-
tor sections or adaptor pieces, 482.6 mm (19) in
600 mm wide enclosures.
Material:
Sheet steel
Surface finish:
Zinc-plated
Supply includes:
Assembly parts.
For enclosure system TS
Also required:
see page 551, or
see page 552.
For enclosure depth
mm
600 1 set 8800.560
800 1 set 8800.580
for 482.6 mm (19) component shelves
Depending on the distance between the two
482.6 mm (19) mounting levels, the installation kit
is screw-fastened in the depth between the
cranked, L-shaped mounting angles or 482.6 mm
(19) mounting frame. Also suitable for TE.
Material:
Sheet steel
Surface finish:
Zinc-plated
Supply includes:
Assembly parts.
Distance between
19 levels
mm
550 850 2 7063.850
Blanking plate, 482.6 mm (19)
For installation in electronic enclosures or
housings.
Material:
Aluminium
Surface finish:
Natural-anodised
U Packs of Model No. VC
1 3 1931.200
2 3 1932.200
3 3 1933.200
4 3 1934.200
6 3 1936.200
7 3 1935.200
9 3 1939.200
12 3 1937.200
Blanking plate,
horizontally hinged
housings.
Material:
Blanking plate: 3 mm aluminium
Hinge: Die-cast zinc
Surface finish:
Blanking plate: Natural-anodised
Hinge: Zinc-plated
Supply includes:
Assembly parts.
Width U Packs of Model No. EL
482.6 mm (19) 6 1 1945.000
Blanking plate,
vertically hinged
housings.
Material:
Blanking plate: 3 mm aluminium
Hinge: Die-cast zinc
Surface finish:
Blanking plate: Natural-anodised
Hinge: Zinc-plated
Supply includes:
Assembly parts.
482.6 mm (19) 3 1 1940.000
482.6 mm (19) 6 1 1941.000
Hinge
for blanking plates
Material:
Die-cast zinc
Surface finish:
Zinc-plated
Supply includes:
Assembly parts.
2 1950.000
Ventilated front panels
For venting enclosures and housings.
Material:
Aluminium
Surface finish:
Natural-anodised
482.6 mm (19) 1 3 2231.000
482.6 mm (19) 2 3 2232.000
482.6 mm (19) 3 3 2233.000
Air baffle plates
for TS
Targeted air routing to the components. To pre-
vent bridges between hot and cold air. Energy
efficiency is boosted while retaining cooling output.
Mounted all-round on the 482.6 mm (19) installa-
tion between the 482.6 mm (19) mounting frame
and modular LCP, LCP rack, side panel or partition.
The width-variable air baffle plates may be indi-
vidually adapted to suit the requirements.
In the variant for 800 mm wide enclosures, vertical
482.6 mm (19) mounting holes of 3 x 1 U are
additionally integrated, which may be used for
configuration with additional components. Cable
glands with stepped collars distributed across
the height facilitate shielded cable routing between
the front and rear section.
In its delivered state, these openings are sealed
with a 1 U blanking panel with snap-in attachment.
Material:
Air baffle plates: Sheet steel, spray-finished
Stepped collar: Plastic, to UL 94-V0
Blanking panel: Plastic, to UL 94-V0
Colour:
RAL 7035
Supply includes:
2 air baffle plates, side, width-variable
1 air baffle plate, top, horizontal
With 800 mm width including blanking panel
and stepped collar
Note:
Mounting on the inner and outer mounting level
in the enclosure depth is not possible.
For enclosures
Width
mm
Height
mm
600 2000 2 7151.206
800 2000 2 7151.208
Infill panel, hinged
for 800 mm wide TS network enclosures
To cover the side cable chamber. The infill panel
is attached to the vertical enclosure frame at the
front. The generous curved design will conceal
even large quantities of cables, and facilitates
combined use with large-scale shunting rings
DK 7220.600, see page 534.
The infill panel has a hinged design and allows
easy access to the cabling level by simply swing-
ing it out. Locating points keep the panel in its
open and closed state.
With an offset 482.6 mm (19) mounting level the
panel may likewise be offset in the enclosure
depth and secured to TS punched sections with
mounting flange on the inner mounting level.
For mounting the 482.6 mm (19) attachment level
in the foremost mounting position, choose the ver-
sion with straight trim panel.
Material:
Sheet steel
Surface finish:
Spray-finished
Colour:
RAL 7035
Supply includes:
Assembly parts.
Trim panel curved
Trim panel straight
Accessories:
17 x 73 mm for the inner mounting level,
see from page 459.
23 x 73 mm,
see page 464.
Note:
The installation of depth stays,
e.g. DK 7827.600/.800, is not possible.
For installation height
U
38 2 7827.532
1)

42 2 7827.534
47 2 7827.536
1)
For installation height
U
42 2 7827.520
1)

1)
Brush strip, vertical
for TS, TE
Within the network distributor, this serves as a flex-
ible infill panel which stylishly conceals the cable
management area to the side of the 482.6 mm (19)
mounting level. The brush strip facilitates con-
venient cable routing from the side and rear
distributor area to the front connection level.
The clearance required in front of the mounting
level is at least 75 mm.
Within the TS, the brush strip is mounted at the
side on the vertical frame section, on horizontal or
vertical punched sections. It may also be mounted
directly on the mounting level of the TS or TE 7000.
For direct mounting on the 482.6 mm (19) mount-
ing frame of the TS or TE, the brush strip should
be cut to length accordingly.
Material:
Aluminium section with brush strip:
Plastic, UL 94-V0
Supply includes:
1 set = 4 brush strips,
length 950 mm each.
mm
2000 1 set 7827.544
Mounting panel
482.6 mm (19), 2 U
For fast integration of smaller mounting units
within the 482.6 mm (19) level, such as potential
equalisation rails, distributor boxes, small electri-
cal components etc.
Simple screw-fastening of the components to the
integral 25 mm system punchings.
Material:
Sheet steel
Surface finish:
Zinc-plated
Supply includes:
Assembly parts.
Panel height
U
Panel width
mm
Packs of
Model No.
DK
2 450 1 7151.300
Support
for small appliances
For secure attachment of small, non-482.6 mm
(19)-conforming equipment such as modems,
power packs, routers etc. Angle-shaped support
for mounting in the empty space at the side
between the 482.6 mm (19) level and the side
panel on L-mounting angles, mounting frame or
chassis.
Attachment of the components and connection
cables can be achieved quickly and easily using
nylon tape or cable ties. Also suitable for cable
routing in the enclosure depth.
Material:
Sheet steel
Surface finish:
Zinc-plated
Supply includes:
Assembly parts.
Accessories:
Nylon loop, cable ties,
see page 530.
W x H x D mm Packs of Model No. DK
350 x 150 x 97 1 7246.500
Mounting kit
for VerticalBox
The vertically hinged support plate offers even
more flexibility in interior installation for cable
routing, attachment of small appliances, socket
strips etc.
Depth-variable positioning on a 25 mm pitch
pattern.
Material:
Sheet steel
Surface finish:
Zinc-plated
Supply includes:
Assembly parts.

W x H mm Packs of Model No. DK
350 x 485 1 7501.100
Captive nuts M5/M6
For the attachment of rack-mounted electronic
equipment, 482.6 mm (19) installed equipment
and blanking plates to mounting angles,
482.6 mm (19).
For use with metal thickness from 0.8 2.0 mm.
In areas of narrow tolerance, captive nuts for
metal thicknesses of 1.2 1.5 mm should be
used. Optionally with or without contact of the
installed equipment to the 482.6 mm (19) section/
enclosure.
Captive nut M5
Captive nut M6
Design
For metal
thicknesses
mm
Packs
of
Model No.
EL
With contact 0.8 2.0 50 2094.500
Without contact 0.8 2.0 50 2092.500
Design
For metal
thicknesses
mm
Packs
of
Model No.
EL
With contact 0.8 2.0 50 2094.200
With contact 1.2 1.5 50 2094.300
Multi-tooth screws
M5 x 16 mm/M6 x 16 mm
For optimum transmission of torques, an extended
tool life and increased safety and reliability when
tightening and loosening screw connections.
Supply includes:
Plastic washers.
Bit size Packs of Model No. DK
M5 Multi-tooth 25 50 7094.130
M6 Multi-tooth 30 50 7094.140
Assembly screws
M5 x 16 mm/M6 x 16 mm
For electronic equipment, 482.6 mm (19)
installed components and blanking plates.
Supply includes:
Plastic washers.
Design Packs of Model No. EL
Phillips-head screw M5 50 7094.120
Cheese-head screw M6 50 7094.110
Phillips-head screw M6 50 7094.100
Cage nut front mounting,
482.6 mm (19)
The cage nut consists of an expanding nut which
is simply inserted into the square attachment hole
at the front and then secured with the assembly
screw.
When tightening the screw, the cage expands
and thus secures the required components.
Clamping range from 1.2 4.5 mm. Multi-tooth
screw head, bit size T 30.
Material:
Sheet steel
Surface finish:
Zinc-plated
Supply includes:
50 expanding nuts
Assembly screws
Plastic washers
Dimensions
mm
Size of
mounting hole
mm
Packs of
Model No.
DK
M6 x 16 9.5 x 9.5 50 2094.400
Spring nuts with screws
M6 x 10 mm for T-slot mounting angle
The spring nuts ensure flexible, secure mounting
of accessory components on the T-slot mounting
angles.
Supply includes:
50 spring nuts,
50 screws, 10 mm, self-locking.
Phillips-head, M6 50 7000.990
Patch panels
Top-hat rail module
Top-hat rail module with mounting clip for top-hat
rails to DIN 50 002, robust metal housing, with
strain relief.
Cat. 6, 2 x RJ 45, System Corning Future Com S
250 (cables are attached without the use of tools).
Design Cat. Packs of
Model No.
DK
2 x Corning Future
Com S 250
6 3 7870.614
Data distributors
LSA-plus system
24 x RJ 45 jacks, shielded, cover with quick-
release fastener, with strain relief, earthing
connection and 12 patch cables STP, 0.6 m,
yellow.
U Cat. Packs of Model No. DK
1 6 1 7870.830
14.8+0.1
2
0
.
1
+
0
.
1
For shielded RJ 45 modular
jacks
To accommodate shielded RJ 45 jacks.
Cut-outs and rear of patch panels electrically con-
ductive to contact the fitted jacks with the patch
panel and the zinc-plated 482.6 mm (19) mount-
ing angles.
With accommodation facility for cable clamp
straps DK 7610.000 or DK 7611.000.
Material:
Sheet steel
Surface finish:
Zinc-plated
Colour:
Front: RAL 7035
Reverse: Zinc-plated, passivated
Accessories:
Cable clamp strap DK 7610.000 or DK 7611.000,
see page 535.
U
Number
of locations
1 16 1 7394.035
L
3
L
2
L
1
3.2
11
R
1
.5
For 24 V interfaces
For the installation of 16 sub-D (trapezoid) jacks
and connectors.
straps DK 7610.000 or DK 7611.000.
Material:
Sheet steel
Colour:
RAL 7035
Accessories:
see page 535.
L1 mm L2 mm L3 mm Packs of
25 21 16.5 1
33.3 29.2 24.7 1
47 43 38.5 1
U
For no.
of poles
Number
of locations
Model No. DK
2 9 16 7087.535
2 15 16 7086.535
2 25 16 7089.535
1
2
+
0
.
1
13+0.1
To accommodate BNC jacks
(version E)
straps DK 7610.000 or DK 7611.000.
Material:
Sheet steel
Colour:
RAL 7035
Accessories:
see page 535.
U
Number
of locations
3 32 1 7069.535
Patch panels
12.4
1
3
.
5
+
0
.
1
1
8
30-0.1
22-0.2
2.5 (6 x)
4
9.6+0.1
To accommodate E-2000,
E-2000 duplex, SC or LC
duplex fibre-optic couplings
For 1 U with accommodation facility for cable
clamp straps DK 7610.000 or DK 7611.000.
Material:
Sheet steel
Colour:
RAL 7035
Accessories:
see page 535.
U
Number
of locations single/
duplex
1 16/8 1 7433.035
2
6
.
4
2
2.4
3
0
.
8
9.91
To accommodate SC duplex
and LC quad fibre-optic
couplings
straps DK 7610.000 or DK 7611.000.
Material:
Sheet steel
Colour:
RAL 7035
Accessories:
see page 535.
U
Number
of locations
1 12 1 7154.035
9
.
6
+
0
.
1 7.8+0.1
To accommodate ST fibre-optic
couplings
straps DK 7610.000 or DK 7611.000.
Material:
Sheet steel
Colour:
RAL 7035
Accessories:
see page 535.
U
Number
of locations
1 16 1 7437.035
Extended delivery times
Panel 1 U, 482.6 mm (19)
with solid tray
For the storage of fibre-optic coupling covers
or assembly parts.
Depth: 100 mm
Material:
Sheet steel
Colour:
RAL 7035
1 1 7300.335
Patch panels
Blanking panel, 482.6 mm (19)
As an extension cover or for population as
required.
Material:
Sheet steel
Colour: RAL 7035
Colour: RAL 9005
U
Installation height
mm
1 44 2 7151.035
1.5 66 2 7157.035
2 88 2 7152.035
3 132.5 2 7153.035
6 266 2 7156.035
U
Installation height
mm
1 44 2 7151.005
2 88 2 7152.005
3 132.5 2 7153.005
1)

6 266 2 7156.005
1)

1)
Blanking panel, 482.6 mm (1 U)
Toolless attachment, 482.6 mm (19)
The blanking panel is used to seal unused areas
within the 482.6 mm (19) mounting level. Quick
toolless attachment means that it is easily inte-
grated anywhere, and can also be removed again
if necessary. The consistent use of blanking
panels ensures targeted air routing in partially
configured racks.
Material:
Plastic, ABS
Fire protection:
Self-extinguishing to UL 94-V0, non-halogen-free
Supply includes:
10 blanking panels with integral quick-fastening.
Colour Packs of Model No. DK
RAL 7035 10 7151.110
RAL 9005 10 7151.105
Identification strips
for patch panels
For individual labelling of different slots,
self-adhesive.
Length: 210 mm, height: 10 mm.
32 7167.000
Splicing boxes
Splicing cassette holder
To accommodate differently sized splicing cas-
settes with variable cassette accommodation.
Up to 8 splicing cassettes may be fitted in one
holder. The splicing cassette holder can be flexi-
bly secured to any mounting surface, and is par-
ticularly suitable for retro-fitting in small
fibre-optic distributors without patch panels.
Material:
Sheet steel
Colour:
RAL 7035
Supply includes:
Holder with threaded bolts
Variable bracket
Cassette cover
Knurled nut
Assembly parts
Height
Packs of
Model No.
DK
Overall height
mm
Threaded bolts
mm
93 85 1 7450.035
Fibre-optic splicing box,
depth-variable
The 482.6 mm (19) splicing box is designed to
accommodate splicing cassettes and can be
installed in any network distributor with 482.6 mm
(19) accommodation and used as a fibre-optic
termination or distributor. The variable cassette fix-
ture permits twist-proof installation of all standard
splicing cassettes. The rear section of the splic-
ing box is completely open for cable entry; a rub-
ber cable clamp strip provides protection against
dust. The fibre-optic cables can be secured with
cable ties or cable clamps.
The splicing box is infinitely depth-adjustable up
to 100 mm within the 482.6 mm (19) flanges. In
addition, the splicing box may be fully withdrawn
from the 482.6 mm (19) flanges. Two strain relief
clips and cable routing clips for the fibre stock
provide a solution to suit any fibre-optic wiring
system.
Installation depth:
302 mm
Material:
Sheet steel
Colour:
RAL 7035
Supply includes:
Splicing box
Cable routing clips
Cassette cover
Mounting accessories for patch panel
Note:
Supplied without patch panel and splicing
cassettes.
U
Maximum no. of
splicing cassettes
1 2 1 7241.005
2 4 1 7242.005
Fibre-optic breakout box, 1 U
For splice-free cabling of fibre-optic breakout
cables.
Cable bundles may be clamped on the hammer
heads at the rear. 4 self-adhesive cable clips are
supplied loose for cable clamping and for storing
excess lengths inside the box.
Material:
Sheet steel
Colour:
RAL 7035
Supply includes:
Breakout box
Cable routing clips
Installation depth Packs of Model No. DK
250 mm 1 7241.500
Splicing boxes
Patch panels
For
Fibre-optic splicing box, depth-variable
Fibre-optic breakout box, 1 U
With cut-outs for population with fibre-optic
couplings.
Material:
Sheet steel
Colour:
RAL 7035
Note:
For drawings of the cut-outs,
see page 569/570.
For coupling
Number of
locations
U
Packs
of
Model No.
DK
ST
12 1 1 7241.015
16 1 1 7241.065
24 2 1 7242.015
E-2000,
E-2000 duplex
1)
,
SC or
LC duplex
24 1 1 7241.024
SC duplex,
LC quad
12 1 1 7241.045
1)
For E-2000 duplex only half of the locations
are available.
Fibre-optic splicing box
with telescopic pull-out
lockable
The 482.6 mm (19) splicing box is designed to
accommodate splicing cassettes and can be
installed in any network distributor with 482.6 mm
(19) accommodation and used as a fibre-optic
termination or distributor. The telescopic pull-out
provides optimum access to the splicing cas-
settes and cable clamp. The variable cassette fix-
ture permits twist-proof installation of all standard
splicing cassettes. The security lock fitted at the
front protects against unauthorised access. The
rear section of the splicing box is completely open
for cable entry; a rubber cable clamp strip pro-
vides protection against dust. The fibre-optic
cables can be secured with cable ties or cable
clamps; two strain relief clips and cable routing
clips for the fibre stock provide a solution to suit
any fibre-optic wiring system.
Installation depth:
363 mm
Material:
Sheet steel
Colour:
RAL 7035
Supply includes:
Splicing box
Cable routing clips
Security lock
Cassette cover
Note:
Supplied without patch panel and splicing
cassettes.
U
Maximum no. of
splicing cassettes
1 2 1 7170.535
2 4 1 7470.535
3 6 1 7570.535
Patch panels
for fibre-optic splicing box, lockable
There is a choice of 20 panels with appropriate
cutouts for the installation of various fibre-optic
couplings, together with 3 blanking panels for
individual population or as a cover.
Material:
Sheet steel
Colour:
RAL 7035
Note:
For drawings of the cut-outs,
see page 569/570.
For coupling Number of locations U Packs of Model No. DK
ST
12 1 1 7174.535
1)

24 2 1 7474.535
48 3 1 7574.535
1)

E-2000,
E-2000 duplex
2)

or SC, LC duplex
20
1 1 7178.535
2 1 7478.535
3 1 7578.535
1)

SC duplex, LC quad
12 1 1 7169.535
24 2 1 7469.535
1)
2)
For E-2000 duplex only half of the locations are available.
Splicing boxes/LSA connection system
Blanking cover
for fibre-optic cut-outs
To cover unused cut-outs in patch panels.
Material:
Plastic PA 6.6
Colour:
Black
SC, E-2000,
LC duplex
20
7300.230
E-2000 duplex 20
SC duplex,
LC quad
20 7300.240
ST 20 7300.250
Fixture with rods, 3 U
for LSA strips
To accommodate 15 LSA profile dividing strips
2/10 on 2 rods, 12 mm.
The fixture unit may be integrated in all 482.6 mm
(19) mounting levels. With cable clamp rail at the
rear.
Dimensions:
W x H x D:
482.6 mm (19) x 132.5 mm (3 U) x 180 mm
Material:
Side panels: Aluminium plates
482.6 mm (19) flange/horizontal rail:
Supply includes:
Fixture with rods as modular system.
3 1 7050.200
Support unit, 3 U
for LSA-Plus strips, max. 150 paired wires
To accommodate a maximum of 15 LSA-Plus
strips (each with 10 paired wires). 3 x 5 LSA-Plus
connection strips 2/10, series 2, may be installed
horizontally. Strip length 124 mm, height pitch pat-
tern 22.5 mm. The support unit may be integrated
in all 482.6 mm (19) mounting levels. The mount-
ing level is recessed 75 mm behind the 482.6 mm
(19) flanges. Integral shunting rings enable tidy
routing and distribution of the telecommunication
cables.
Material:
Stainless steel
Supply includes:
Support unit, 8 shunting rings.
3 1 7050.100
Accommodation system, 2 U
for LSA installation kit
To accommodate LSA mounting troughs/cable
retainers on the 482.6 mm (19) mounting angle.
Dimensions:
Overall depth: 98.5 mm
Height: 2 U
Material:
Sheet steel
Colour:
RAL 7035
Accessories:
FM universal mounting bracket,
see page 575.
2 2 7050.035
LSA connection system
FM universal mounting bracket
The universal mounting bracket for LSA-Plus
strips (8 or 10 paired wires) and other connection
systems are comprised of 2 brackets, which may
be combined with different systems depending
on their position in relation to one another. The
brackets also slide flexibly against each other so
that strips with different lengths can be used.
Material:
Sheet steel
Surface finish:
Zinc-plated
Supply includes:
2 mounting brackets
Support strips
Assembly parts
Length
mm
Connection system LSA-Plus
Other
connection systems
Pitch pattern in mm 22.5 17.5
275 No. of strips 12 15 1 set 7031.100
576
577
System accessories for monitoring
CMC III Processing Unit/Compact
CMC III system representation..................................................................578
CMC III system overview...........................................................................580
CMC III sensors/accessories
Control units for CMC III Processing Unit..................................................583
CMC III sensors for direct connection.......................................................583
Interface for CMC II sensors .....................................................................583
Access System..........................................................................................583
Interface for PSM, PCU, FCS, DRC...........................................................583
CMC III accessories
Power pack................................................................................................584
Programming cable...................................................................................584
CAN-Bus connection cable.......................................................................584
Connection cable/extension......................................................................585
Extension cable.........................................................................................585
CMC III mounting unit, 1 U........................................................................585
CMC III mounting unit................................................................................585
Mounting unit, 1 U.....................................................................................586
Display Unit II ............................................................................................586
ISDN unit ...................................................................................................586
GSM unit, quad-band................................................................................587
Fan Control System FCS ...........................................................................587
Fan 24 V DC for FCS .................................................................................587
Universal lock unit .....................................................................................587
Door Control System
Door control module..................................................................................589
Door kit ......................................................................................................589
Door comfort handle..................................................................................589
Door switch................................................................................................589
KVM switches
SSC view 8 USB ........................................................................................591
SSC view 32 Cat ........................................................................................591
SSC compact 32 Cat ................................................................................591
SSC premium 2/16, 4/32, 8/32 ..................................................................592
SSC Duo 16...............................................................................................593
Console local .............................................................................................594
Console Cat 5............................................................................................594
Console IP .................................................................................................595
SSC cnverter .............................................................................................595
SSC converter VT100 (RS232) ..................................................................595
CPU cable .................................................................................................596
Cat 5 patch cable......................................................................................596
SSC Power Control ....................................................................................596
SSC Power Pack........................................................................................596
RFID mounting frame ................................................................................597
RFID tags...................................................................................................597
RFID controller...........................................................................................597
578
Monitoring system CMC III
CMC III Processing Unit
The powerful, professional monitoring solution for demanding
IT infrastructure environments, for up to 32 additional monitoring
components.
Power supply
Redundant power supply
CMC III I/O Unit
CMC III Power Unit
CMC III CAN-Bus Unit
Up to 16 CAN-Bus systems may be connected
CMC III sensors for direct connection
CMC III CAN-Bus sensor for connection of CMC II sensors
CMC III CAN-Bus access
Up to 16 CAN-Bus systems may be connected
CMC III Processing Unit Compact
The simple monitoring solution for applications in industry and building
monitoring or for smaller monitoring applications in IT for up to four
additional CAN-Bus monitoring components.
Power supply
Redundant power supply
CAN-Bus sensor for connection of CMC II sensors
Up to four CAN-Bus systems may be connected
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
7
2
3
CMC III Processing Unit 1
11
8
9
10
4
579
13
14
CMC III Processing Unit Compact 12
15
16
17
6
5
15
18
CMC III Processing Unit Compact
System overview
Up to 4 CAN-Bus
components are
supported.
1)

CMC III CAN-Bus sensor
Two integral digital inputs
Integral sensors:
Temperature sensor
Infrared access sensor
Accessory modules RJ 12/RS232:
Display Unit DK 7320.491
ISDN Unit DK 7320.830
GSM Unit DK 7320.820
Ethernet 10/100 BaseT RJ 45 with PoE:
Ethernet interface to IEEE 802.3
Via 10/100 BaseT full-duplex 10/100 Mbit/s.
Voltage supply 24 V DC and redundant
voltage supply 24 V DC
Power packs/connection cables,
see page 584.
Alarm relay output:
Changeover contact for safety extra-low
voltage
1)
Depending on the
power supply/connection
combinations,
see page 583.
CMC II
sensors
Mini USB:
The programming cable DK 7030.080
is required for programming.
CMC III sensors
for direct connection
Compact
Interfaces unit for
connecting CMC II
accessories
Connection for other
products,
see page 583.
Contains 2 channels of
the PU II Unit systems:
External 24 V DC supply
supported.
Model No. DK
CMC III
CAN-Bus Unit
7030.030
System overview
Up to 16 CAN-Bus
systems are supported.
1)

CMC III sensors:
for direct connection
CMC III CAN-Bus sensor
Two integral digital inputs
Integral sensors:
Temperature sensor
Infrared access sensor
Ethernet 10/100 BaseT RJ45 with PoE:
Ethernet interface to IEEE 802.3
Via 10/100 BaseT full-duplex 10/100 Mbit/s.
Voltage supply 24 V DC and redundant
voltage supply 24 V DC
Power packs/connection cables,
see page 584.
Alarm relay output:
Changeover contact for safety extra-low
voltage
CMC II
sensors
USB master for data logging and update
Mini USB:
The programming cable DK 7030.080
is required for programming.
Contains
8 digital inputs
and 4 relay outputs
1
2
Functions:
Switching and measurement
of voltage, power, output and
work.
With two outputs.
Also for the activation of
AC fans.
Interfaces unit for
connecting CMC II
accessories
Connection for other
products,
see page 583.
SD card insert:
for data logging
Accessory modules RJ 12/RS232:
Display Unit DK 7320.490
ISDN Unit DK 7320.830
GSM Unit DK 7320.820
Control units
CMC III I/O Unit CMC III Power Unit
Model No. DK
CMC III
I/O Unit
7030.040
Model No. DK
CMC III
Power Unit
7030.050
Model No. DK
CMC III
CAN-Bus Unit
7030.030
Up to 16 CAN-Bus
systems are supported.
1)

1)
Depending on the power supply/connection combinations, see page 583.
2 1
CMC III Processing Unit/Compact
System overview Page 580/581 Basic modules and connection accessories Page 583
Application areas:
Compact:
Industrial and enclosure
monitoring
Building monitoring
Small monitoring applications
in IT
Larger monitoring applica-
tions in IT and industry
Material:
Plastic
Surface finish:
Front: Smooth
Enclosure: Textured
Colour:
Front: RAL 9005
Enclosure: RAL 7035
IP 30 to IEC 60 529
Supply includes:
Basic system
Quick-start instructions
4 mounting feet
CMC III Processing Unit Compact CMC III Processing Unit
W x H x D mm 138 x 40 (1 U) x 120 + 12 (front assembly) 138 x 40 (1 U) x 120 + 12 (front assembly)
Operating humidity range
5% to 95% relative humidity,
non-condensing
non-condensing
Sensors/CAN-Bus connection units max. 4 max. 32
Max. overall cable length for CAN-Bus 1 x 50 m 2 x 50 m
Model No. DK 7030.010 7030.000
Interfaces
Network interface (RJ 45) Ethernet to IEEE 802.3 via 10/100BaseT with PoE Ethernet to IEEE 802.3 via 10/100BaseT with PoE
Front USB interface Mini USB for system setting Mini USB for system setting
Rear USB interface
for USB stick for data recording and
SW updates up to 32 GB
Front SD-HC slot 1 x up to 32 GB for data recording
Rear serial RS232 (RJ 12)
1 x for connecting Display Unit DK 7320.491 or
GSM Unit DK 7320.820 or ISDN Unit DK 7320.830
1 x for connecting Display Unit DK 7320.491 or
GSM Unit DK 7320.820 or ISDN Unit DK 7320.830
Inputs and
outputs
Digital inputs (terminal) 2 2
Relay output (terminal) Changeover contact max. 24 V DC, 1 A Changeover contact max. 24 V DC, 1 A
CAN-Bus (RJ 45)
1 x for max. 4 sensors
(quantity restriction, see page 583)
2 x for max. 16 sensors each = 32 sensors in total
(quantity restriction, see page 583)
Operation/
signals
Push-button 1 x acknowledgement button 1 x acknowledgement button
Concealed reset button 1 x service button 1 x service button
Piezo signal generator 1 1
LED display 1 x multi-colour OK/warning/alarm 1 x multi-colour OK/warning/alarm
Rear LED 1 x for the network status 1 x for the network status
Protocols Ethernet
TCP/IPv4, TCP/IPv6, SNMPv1, SNMPv3, Telnet, SSH,
FTP, SFTP, HTTP, HTTPS, NTP, DHCP, DNS server,
SMTP, XML, Syslog, LDAP
TCP/IPv4, TCP/IPv6, SNMPv1, SNMPv3, Telnet, SSH,
FTP, SFTP, HTTP, HTTPS, NTP, DHCP, DNS server,
SMTP, XML, Syslog, LDAP
Redundant
power supply
Input 24 V DC (jack) 1 x for connecting CMC III power pack 1 x for connecting CMC III power pack
Input 24 V DC (terminals)
1 x for direct connection or
for connecting CMC III power pack
1 x for direct connection or
for connecting CMC III power pack
Power over Ethernet 1 x 1 x
Functions
Time function
Real-time clock, energy-buffered (24 h)
without battery/accumulator, with NTP
Real-time clock, energy-buffered (24 h)
without battery/accumulator, with NTP
User administration LDAP LDAP
User interface Integral WEB server Integral WEB server
Control room connection Integral OPC server Integral OPC server
Integral
sensors
Temperature sensor NTC sensor in the enclosure front NTC sensor in the enclosure front
Access sensor Infrared technology in the enclosure front Infrared technology in the enclosure front
CMC III sensors/accessories
Control units for CMC III Processing Unit
Interface for CMC II sensors
Access System
Interface for PSM, PCU, FCS, DRC
Model No.
DK
PU
Compact
PU
Page
Maximum quantity
CMC III I/O Unit, 8 digital inputs + 4 relay outputs 7030.040
3)
16 581
CMC III Power Unit, 1 input (C14) + 2 outputs (C13) 230 V, 50/60 Hz 7030.050
3)
16 581
Temperature sensor 7030.110 4 32
Temperature/humidity sensor 7030.111 4 32
Infrared access sensor 7030.120 4 32
Vandalism sensor 7030.130 4 32
Analog airflow sensor 7030.140 4 10
1)

Analog differential pressure sensor 7030.150 4 32
Universal sensor (digital input or 4-20 mA or
S0Bus power meter or Wiegand interface)
7030.190 4 32
CMC III CAN-Bus sensor 7030.100 4 32
For connecting the following products:
5 x access sensors (packs of 2), connect a max. of 5 in series 7320.530
1 x smoke detector 7320.560
1 x motion detector 7320.570
1 x voltage monitor 48 V DC 7320.620
1 x leakage sensor 7320.630
1 x leakage sensor, with sensor length 15 m 7320.631
1/3 x fire detector and extinguisher system DET-AC Plus with 3 messages 7338.120 328
1/3 x early fire detection system DET-AC Plus with 3 messages 7338.220 328
1/2 x door control system with 2 enclosure channels 7320.790 589
CMC III CAN-Bus Access
(with integral infrared access sensor and interface for one reader III)
7030.200 2 16
1)

For connecting the following products:
1 x Ergoform-S handle (electro-magnetic) 7320.700
1 x Comfort handle TS 8 (electro-magnetic TS 8 handle with master key
function, with and without CCP)
7320.721
1 x universal lock 7320.730 587
1 x universal handle 7320.950
1 x CMC III coded lock 7030.220 2 16
1)

1 x CMC III transponder reader 7030.230 2 16
1)

CMC III CAN-Bus Unit for 2 unit channels 7030.030
3)
1 4
2)
581
For connecting the following products (note: separate supply via power pack possible):
2 x Fan Control System FCS (DK 7320.812 fan 24 V DC for FCS) 7320.810 587
2 x fan mounting plate DC (universal fan roof W x D 800 x 800 mm
with FCS)
7858.488 224
2 x RFID controller DRC 7890.500 597
2 x 4 x Rittal Power Control Unit (PCU) 8-way 7200.001 510
2 x 4 x Rittal Power Control Unit (PCU) C13/earthing pin LED 6-way 7859.215 510
2 x 4 x Rittal Power Control Unit (PCU) C13 LED 8-way 7859.225 510
2 x 4 x Rittal Power Control Unit (PCU) C13/19 LED 6-way 7859.235 510
2 x 4 x PSM socket module active PSM C13 8-way 7856.201 203
2 x 4 x PSM socket module active PSM C13/earthing pin 6-way 7856.203 510
2 x 4 x PSM socket module active PSM C13/19 6-way 7856.204 510
2 x 4 x PSM socket module active PSM C13/earthing pin LED 6-way 7859.212 203
2 x 4 x PSM socket module active PSM C13 LED 8-way 7859.222 203
2 x 4 x PSM socket module active PSM C13/19 LED 6-way 7859.232 203
2 x PSM busbar with measurement 16 A 7856.016 202
2 x PSM busbar with measurement 32 A 7856.003 202
2 x PSM measurement module 16 A 7856.019 204
1)
Max. 5 p. and
2)
max. 1 p. for power supply with PoE or 48 V power pack.
3)
Optional attachment see page 585.
CMC III accessories
Power pack 230 V
The CMC III power pack may be integrated into
the CMC III assembly unit
CMC III power pack Model No. DK
CMC III power pack
Input voltage 100 240 V 50/60 Hz,
output voltage 24 V DC, 2 A
7030.060
1)

1)
Connection cable/extension required
D/F/B: 230 V, Model No. DK 7200.210
USA/CDN: 230/115 V, Model No. DK 7200.214
C13/C14: 230/115 V, Model No. DK 7200.215
Power pack 48 V/
Connection cable 24 V
for CMC III PU, PU Compact/FCS
An alternative power pack is designed for the
telecommunications sector (48 V battery volt-
ages) and is connected at the input end via a
terminal block.
The power pack includes an output cable,
1.65 m long.
Rated voltage: 20 72 V DC
Rated current: max. 2.5 A
Secondary range: 24 V DC, 1.3 A
Connection cable for CMC III/FCS for direct connec-
tion, provided the 24 V DC supply is available.
Primary input voltage Output voltage Model No. DK
48 V DC 24 V DC 7320.435
Packs of Length Model No. DK
1 2 m 7320.813
Programming cable
The programming cable is required for com-
missioning of the Processing Unit (PU) or
PU Compact.
Model No. DK
CMC III programming cable USB 7030.080
CAN-Bus connection cable
This can be used to connect the PU with the
CAN-Bus sensors III, units III, control units III
as a bus. Also for cabling together.
Cable
Length
(m)
Packs
of
Model No.
DK
CMC III CAN-Bus
connection cable RJ 45
0.5 1 7030.090
CMC III CAN-Bus
1 1 7030.091
CMC III CAN-Bus
1.5 1 7030.092
CMC III CAN-Bus
2 1 7030.093
CMC III CAN-Bus
5 1 7030.094
CMC III CAN-Bus
10 1 7030.095
CMC III accessories
Connection cable/extension
The cable is used to connect to:
CMC III power pack C13
CMC III power unit C13
PCU
PVC cable, 3-pole, with IEC connector (non-heat-
ing appliances) with contact protection CEE22.
Length: at least 1.8 m
Country version
Voltage
Volt
Model No.
DK
D/F/B/C13 230 7200.210
USA/CDN/C13 230/115 7200.214
IEC 320 device
extension
C13/C14
230/115 7200.215
Connection cable
D/C19
230/115 7200.216
Connection cable
C19/C20
230/115 7200.217
Extension cable
for cable extension of CMC III sensors and
FCS fans
Connector/jack Length m Packs of Model No. DK
RJ 12 5 4 7200.450
RJ 12 1 2 7320.814
CMC III mounting unit, 1 U
To accommodate PU, PU Compact, control units,
CMC III CAN-Bus unit and CMC III power pack.
The mounting unit can accommodate up to 3 units
and is secured in the 482.6 mm (19) frame.
Accessories:
Cable clamp strap DK 7610.000,
see page 535.
CMC III mounting unit, 1 U 1 7030.070
CMC III mounting unit
for enclosure frame
Can accommodate one unit and is mounted on
the enclosure frame.
CMC III mounting unit
for enclosure frame
1 7030.071
CMC III accessories
Mounting unit, 1 U
For display, ISDN and GSM unit, fan control
system, door control module, dynamic rack
control
For accommodating between two 482.6 mm (19)
mounting angles. Cable clamp straps DK 7610.000
or DK 7611.000 can be used for cable clamping.
Material:
Sheet steel
Surface finish:
Spray-finished
Colour:
RAL 7035
Mounting unit, 1 U
Single cover
Accessories:
Cable clamp strap, see page 535.
1 7320.440
2 7320.441
Display Unit II
The Display Unit II may be linked directly to the
CMC III. CMC alarms, status messages, tempera-
tures, voltages, currents etc. may be displayed
on the screen, depending on the monitoring appli-
cation.
Note:
The serial interface RS232 of the PU/PUC may
only be assigned to one accessory module.
Also required:
Processing unit, see page 582.
Mounting unit, see page 586.
1 7320.491
ISDN unit
For configuring a redundant transmission channel
or, if there is no network infrastructure available,
for alarm forwarding. The alarm signal is designed
in SMS format. Power supply is via the process-
ing unit.
Requirements for the ISDN connection:
DSS1 (Euro-ISDN) must also be provided when
connecting to the ISDN system
Point-to-multi-point configuration
Supply includes:
Connection cable.
Note:
The serial interface RS232 of the PU/PUC may
only be assigned to one accessory module.
Also required:
Components Model No. DK
ISDN unit 7320.830
1)

1)
CMC III accessories
GSM unit quad-band
For configuring a redundant transmission channel
or, if there is no network infrastructure available,
the unit may be used for alarm forwarding.
The alarm signal is designed in SMS format.
The GSM Unit Quad-Band covers 4 GSM fre-
quencies: 850 MHz, 900 MHz, 1800 MHz and
1900 MHz.
A standard, commercially available SIM card
for GSM must be provided by the customer.
Note:
The serial interface RS232 of the PU may only
be assigned to one accessory module.
Also required:
GSM unit quad-band Model No. DK
SMS function 7320.820
Fan Control System FCS
Speed-controlled fan system
The Fan Control System regulates and controls
the speed of up to 6 fans, 24 V DC. It may option-
ally be connected to the CMC III CAN-Bus unit
DK 7030.030.
Functions:
Speed-regulated speed control
Fan speed monitoring
Optional connection via Web/SNMP
Note:
FCS fitted in fan roof, see page 224.
Also required:
Power pack DK 7030.060,
see page 584.
Connection cable DK 7200.210,
see page 585.
Fan DK 7320.812,
see page 587.
Extension DK 7320.814,
see page 585.
1 U mounting unit 7320.440,
see page 586.
FCS Model No. DK
Without fan 7320.810
Fan 24 V DC for FCS
with speed monitoring
Fan with integral speed monitoring with RJ 12
connector/connection cable 0.6 m for connecting
to FCS DK 7320.810.
Rated current: 0.28 A (max.)
Rated output: 6.72 W (max.)
3
/h
Speed: 2650 rpm
Noise level: 45 dB (A)
Also required:
RJ 12 extension, 1 m, DK 7320.814,
see page 585.
2 7320.812
Universal lock unit
The security lock consists of a base unit and a
lock counterpart. The base unit is attached to the
enclosure frame. The lock counterpart is attached
to the door.
Rated current: 140 mA
Note:
Supplied without mounting kit.
Also required:
CMC III CAN-Bus access DK 7030.200,
see page 583.
1 set 7320.730
Door Control System
Door Control System
For automatic opening of closed rack systems:
In the event of cooling system failures.
For extinguishing a fire using a fire extinguisher
system.
Note:
To be connected at rear:
Door Kit
Up to 16/2 door kits may be connected for
automatic opening.
Door comfort handle or Door switch
Up to 16/2 door comfort handles/door switches
may be connected for manual opening.
Automatic opening is achieved by connecting
to the PU/PU Compact. Independently of this,
the doors may be opened using the door com-
fort handle/door switch.
In the event of a power failure, the doors will
open.
The front and rear door must always be
opened.
Also required:
CMC III Processing Unit/Compact,
see page 582.
System representation
Door Control System:
A maximum of 16 door control systems per processing unit
A maximum of 2 door control systems per processing unit may be connected
1
1 2
2
CMC III
Processing Unit
Processing Unit Compact
Door control
module
CAN-Bus unit
(DK 7030.100)
Door kit
Door comfort handles
1
2
Door 1/2
Door 3/4
Door Control System
Door control module
For activation of up to 4 door kits There is 1 con-
trol channel available per 2 door kits (e.g. front
and rear door). There is optionally a normally-
closed contact integrated for each door output,
which is used to connect the automatic door
switch, door comfort handle or a customer-
specific system (e.g. room extinguisher system).
Also required:
Mounting unit DK 7320.440, see page 586.
AC power pack 230 V, see page 584.
Connection cable, see page 585.
W x H x D mm 136 x 44 (1 U) x 129
Rated voltage 24 V DC
Door outputs 4 x 24 V DC, 400 mA
Ports for CMC III
CAN-Bus unit
2 x RJ 12
Normally closed
contacts
Connection must be designed
for 30 V DC, 1 A
Temperature
application range
+5C to +45C
Humidity
application range
non-condensing
IP protection
category
IP 40 to IEC 60 529
Door kit
Fitting a standard door for the Door Control
System
The door kit operates with a gas pressure
damper system, allowing the door to be
opened in any emergency situation. The doors
are kept closed by a magnet system, which
unlike mechanical lock systems will release the
door in every instance.
The door kit is connected and activated
using the corresponding door control module
DK 7320.790.
Supply includes:
Gas pressure damper
Cable harness
Magnetic lock
Assembly parts
Version for Packs of Model No. DK
2-piece door 1 7320.792
1-piece glazed door 1 7320.795
1-piece sheet steel door 1 7320.796
Door comfort handle
with door opener function
By actuating the lock mechanism, the door is
released via the automatic door opening system.
Prepared for the installation of standard commer-
cially avaialble semi-cylinders, 40 mm, and SZ
lock and push-button inserts.
Length: 302 mm.
Rated current: max. 3 A
Connection cable: Length 3 m
Temperature application range: +5C to +40C
Also required:
Handle adaptor for mounting on glazed door
TS 8611.080,
see page 402.
Design Model No. DK
RAL 7035 7320.794
Door switch
Switch for connecting to the normally closed con-
tacts of the door control module (DK 7320.790)
for manual door opening.
It is mounted on the 25 mm pitch pattern of the
TS 8 frame section.
Installation 16.2 mm
250 V/2 A
Supply includes:
3 m connection cable
Mounting bracket
Assembly parts
1 7320.793
Monitor/keyboard unit, 1 U
With 17 TFT display and VGA/DVI connection
Benefits:
High-quality manufacturing
Analog and digital video input
Separate numerical keypad
Optionally with integrated KVM switch for up
to 32 server connections in just 1 U
Low energy consumption
Simple, one-man installation
Technical design
17 (432 mm) TFT display
Native resolution 1280 x 1024
Format 4 : 3
16.7 million colours
Brightness approx. 350 cd/m
2
(typ.)
Contrast ratio approx. 1000 : 1
Mains voltage 100 240 V AC, 50 60 Hz
Ambient temperature +5C to +45C
(in operation)
Max. power consumption in operation,
without optional KVM switch: 32 W
Max. power consumption when closed,
without optional KVM switch: < 1 W
Rear connections: Mains power, VGA,
DVI-D, PS/2, USB, power supply for KVM
Lockable at the front
Cables are safely routed in the energy chain
Accessories:
For monitoring several servers:
KVM switches, see page 591.
Width
mm
Height
U
Depth
mm
Installation
depth mm
Packs of Colour Keyboard Model No. DK
482.6
(19)
1 680 680 850 1
RAL 7035
German 9055.310
English 9055.312
RAL 9005
German 9055.410
1)

English 9055.412
1)

Other country-specific versions available on request.
1)
KVM switches
1
2
3
KVM switches
With these ultra-compact KVM switches for
482.6 mm (19) mounting or for mounting behind
a Rittal monitor/keyboard unit, space-saving
server administration becomes possible in any
IT rack. The Rittal SSC switching system grows
flexibly with your requirements. With the SSC com-
pact/view 32 Cat, the computers are connected
via Cat cables and converters (SSC converter).
The signals for video, keyboard and mouse are
transmitted via a shared cable.
Processor-controlled keyboard and mouse emu-
lation for each channel ensures fault-free booting
and reliable switching between the connected
computers. The SSC view optionally extends
the Rittal monitor/keyboard unit to include the
function of an 8- or 32-port KVM switch, without
requiring an additional U in the server rack for
mounting.

SSC view
8 USB

SSC view
32 Cat

SSC compact
32 Cat
Installation type
For mounting behind
the monitor/keyboard unit
DK 9055.XXX
For mounting on
482.6 mm (19)
levels
Model No. DK 7552.002 7552.100 7552.110
Equipment 8 Port KVM 32 Port KVM 32 Port KVM
Number of computers in stand-alone mode 8 32 32
Number of users (with password protection) 1 1 1
Cascading
2)
as slave to SSC view/compact 32 Cat
(with OSD transfer)

OSD menu with mouse operation (English)
OSD superimposed on computer screen
(may be de-activated)

OSD display of channels used
Hotkeys for computer selection
Autoscan
Autoskip (skip over unused channels)
Type of cable to computer or to SSC Connect
VGA/HD15
and PS/2
Cat 5, 6 Cat 5, 6
Maximum cable length, SSC to computer
(depending on cable quality)
4 m 15 m (30 m) 15 m (30 m)
Port and system support PS/2 and USB
PS/2, USB,
SUN-USB
PS/2, USB,
SUN-USB
Automatic cable alignment (manually readjustable)
1)

1)

LED displays (rear) None Power Power
Maximum video resolution (depending on cable length)
1280 x
1024@85 Hz
1920 x
1440@75 Hz
1920 x
1440@75 Hz
Bandwidth 200 MHz 250 MHz 250 MHz

Computer
SUB-HD15 /
PS/2 / USB-B
RJ 45 RJ 45
Strengthener
SUB-HD15 /
PS/2 / USB-B
SUB-HD15 /
PS/2
SUB-HD15 /
PS/2
Cascading port
(connection for slave, SSC compact only)
RJ 45 RJ 45
Service (for firmware update) Jack 2.5 mm Jack 2.5 mm
12 V DC power supply
(from monitor/keyboard unit)

Power supply 100 240 V, 50/60 Hz
(internal power pack, IEC 320, C14)

Power consumption (approx.) 10 W 13 W 13 W
Operating temperature +5 to +45C +5 to +45C +5 to +45C
Protection category IP 20 IP 20 IP 20
Enclosure
Material Sheet steel Sheet steel Sheet steel
Surface finish Powder-coated Powder-coated Powder-coated
Dimensions (excluding protruding parts)
approx. W x H x D mm
482.6 x 44 x 140 482.6 x 44 x 140 482.6 x 44 x 140
Certification CE CE CE
1)
With a cable length of max. 15 metres, there is no need for any manual video readjustments. Above and beyond this,
the maximum permissible cable length is approximately 30 metres (depending on the cable quality).
Here, manual readjustment may be required.
2)
Up to 3 SSC compact/view 32 Cat may be cascaded to one master (max. 125 servers on 1 user).
Accessories
Mains connection cable (for SSC compact only) 7200.210
CPU cable VGA/PS/2 (with lockable
PS/2 connectors, at both ends)
2 m 7552.120
4 m 7552.140
CPU cable VGA/USB, USB-A (computer)
to USB-B (switch)
2 m 7552.122
5 m 7552.142
SSC converter PS/2 7552.201 7552.201
SSC converter USB 7552.202 7552.202
1 1 2
3
3
KVM switches
1
2
3
4
SSC premium 2/16, 4/32, 8/32
Highly integrated KVM matrix based on
Cat technology
KVM switching technology which adapts flexibly
to your future requirements. Thanks to Cat tech-
nology (transmission of the signals for keyboard,
video and mouse via a Cat cable), the amount of
cabling work required can be significantly reduced.
Super-compact 1 U systems with up to 32 server
ports are supported. The full matrix switches offer
each of the connected users unrestricted, simul-
taneous access to the chosen computer system.
There are various console types available for
administration.
By separating the hardware switch and operating
console, the systems may be adapted to any
required computer environment. On the computer
side, conversion to standard PC interfaces is
achieved via separate converters which optimise
all signals (keyboard, video, mouse) for transmis-
sion via the Cat cable.
Material:
Sheet steel
Colour:
RAL 7035
IP 30
Also required:
SSC converter (depending on the number of
computers) and at least one operator console,
see page 594/595.
Mains connection cable (DK 7200.210),
see page 585.
Connection example:
Rittal SSC premium

2/16

4/32

8/32
1)
7552.030
1)
7552.040
1)
Equipment
Number of computers in stand-alone mode 16 32 32
Number of computers with cascading as full matrix
(max. 3 levels, type-identical SSC premium)
1024 2048 512
Number of users (local, remote, IP), mixed and simultaneous 2 4 8
Number of users that may be administered
(with allocation of rights)
128 128 128
Integral user/computer administration
Support of central directory services and authentication systems
Display of system structure in the OSD per computer (path)
OSD superimposed on computer screen
(may be de-activated)

Type of cable to SSC converter and SSC console Cat 5, 6 Cat 5, 6 Cat 5, 6
Maximum cable length console computer
(depending on cable quality)
300 m 300 m 300 m
Port and system support (SSC converter)
PS/2, USB,
SUN-USB/VT100
PS/2, USB,
SUN-USB/VT100
PS/2, USB,
SUN-USB/VT100
Automatic video/cable alignment (manually readjustable)
LED displays, front
Power/Power Redundant
System Ready (illuminates as soon as the system booting
process has been completed without error)

Status Switch (illuminates when the SSC is operational)
LED displays, rear
Computer port busy/connected yellow/green yellow/green yellow/green
Console port busy/connected yellow/green yellow/green yellow/green
Network port full duplex/half duplex yellow/flashing
Network port connection status/activity green/flashing
Maximum video resolution (depending on cable length)
1920 x 1440 @
75 Hz
1920 x 1440 @
75 Hz
1920 x 1440 @
75 Hz
Bandwidth 250 MHz 250 MHz 250 MHz
Activation of switchable socket strip (on/off)
Connections
Computers/consoles RJ 45 RJ 45 RJ 45
Service (front) for firmware update Jack 2.5 mm Jack 2.5 mm Jack 2.5 mm
RS232 (front) RJ 11 RJ 11 RJ 11
Network 2 x RJ 45
Power supply via IEC 320 connection (IEC 320 C13)
Redundant power supply (with SSC power pack) 4-pole mini-DIN 4-pole mini-DIN 4-pole mini-DIN
Power supply (internal power pack)
90 264 V/
47 63 Hz
90 264 V/
47 63 Hz
90 264 V/
47 63 Hz
External power supply, redundant 12 V/approx. 1 A 12 V/approx. 1 A 12 V/approx. 1 A
Power consumption (approx.) 12 W 13 W 16 W
Dimensions (excluding protruding parts) approx. W x H x D mm 482.6 x 44 x 286 482.6 x 44 x 286 482.6 x 44 x 286
Conformity CE CE CE
1)
1 2 3
4
KVM switches
SSC Duo 16
Ultra-compact KVM switch with both a local
access and an IP access These two users are
able to access the connected servers in parallel/
simultaneously.
Up to 16 servers may be connected using Cat
cables and SSC converter adaptors (available in
a PS/2 and USB variant). Processor-controlled
keyboard and mouse emulation for each channel
ensures fault-free booting and reliable switching
between the connected computers. The integral
IP console supports location-independent access
to the servers down to BIOS level.
Access may be made both via the integral Web
interface (via Java client) and via client software
for Windows and selected Linux distributions,
available free of charge. The switch includes
rights administration for up to 16 user profiles.
Material:
Sheet steel, powder-coated
Colour:
RAL 7035
IP 40
Also required:
One SSC converter adaptor DK 7552.201 (PS/2)
or DK 7552.202 (USB) is required for each con-
nected computer, see page 595.
Note:
Software updates are available at
www.rittal.com
SSC Duo 16
Equipment
No. of computers that may be connected 16
Number of users (local, IP), mixed and simultaneous 2
Number of users that may be administered (with allocation of rights) 16
Integral user/rights administration (also via directory services)
OSD superimposed on computer screen (may be de-activated)
Type of cable to SSC converter and SSC console Cat 5, Cat 6
Maximum cable length SSC Duo 16 computer (depending on cable quality) 30 m
Port and system support (SSC converter) PS/2, USB
Automatic video and cable alignment (manually readjustable)
LED displays
Power
System Ready
(illuminates as soon as the system booting process has been completed without error)

Status Switch (illuminates when the SSC is operational)
Network port (activity, connection status)
Maximum video resolution (depending on cable length) 1920 x 1440 @ 75 Hz
Bandwidth 250 MHz
Connections
Computers/consoles RJ 45
Service for firmware update Jack 2.5 mm
Network RJ 45
Power supply via IEC 320 connection (EN 60 320 C14)
Power supply (internal power pack) 90 264 V/47 63 Hz
Power consumption (approx.) 20 W
Dimensions approximately W x H x D mm 482.6 mm x 1 U x 290 mm
Certifications CE
Accessories
SSC converter PS/2 7552.201
SSC converter USB 7552.202
Cat 5 cable 2 m 7320.472
Cat 5 cable 5 m 7320.475
Cat 5 cable 10 m 7320.481
Cat 5 cable 15 m 7320.485
Mains connection cable (earthing-pin) 7200.210
KVM switches
Console local
for SSC premium
For installation in
482.6 mm (19)
at the rear of 15/17 monitor unit (9055.XXX)
As the link between the keyboard, monitor, mouse
(or the Rittal monitor/keyboard unit) and the SSC
premium. Via the console, the computer systems
connected to the switch may be conveniently
selected and administered using the OSD.
Power supply is optionally via the Rittal monitor/
keyboard unit or, in the case of stand-alone
482.6 mm (19) installation, via the SSC Power
Pack (DK 7552.220).
Material:
Sheet steel
Colour:
RAL 9006 (white aluminium)
Supply includes:
Assembly parts.
Video resolution: Max. 1920 x 1440 @ 75 Hz
(depending on the cable length)
Video bandwidth: 250 MHz
Voltage supply: 12 V DC (from monitor/
keyboard unit) or via SSC Power Pack
DK 7552.220
Dimensions:
W x H x D mm: 325 x 44 x 85 (stand-alone)
W x H x D mm: 482.6 x 44 x 140
(built into 482.6 mm/19)
Connections (jack):
PS/2 (keyboard/mouse)
USB-A (keyboard/mouse)
D15 (VGA-Video RGB & Sync.)
RJ 45 (KVM matrix connection)
Mini-DIN 4 (12 V power supply)
Also required:
Only for 482.6 mm (19) installation without
monitor/keyboard unit:
SSC Power Pack DK 7552.220,
see page 596,
Cat 5 patch cable,
see page 596.
Type Packs of Model No. DK
Console local 1 7552.200
Console Cat 5
for SSC premium
This remote console forms the link between the
keyboard, monitor, mouse and the SSC premium.
Via the console, the computer systems con-
nected to the switch may be conveniently
selected and administered using the OSD. The
signals are forwarded via Cat cable, depending
on the cable quality up to 300 m, via the KVM
matrix to the connected computers. Additionally,
2 local PCs may be connected if required.
The console is designed as a compact desktop
enclosure with integral wide-range power pack
(482.6 mm (19) versions on request).
Material:
Sheet steel
Colour:
RAL 7035
Video resolution: Max. 1920 x 1440 @ 75 Hz
(depending on the cable length)
Video bandwidth: 250 MHz
Power supply (internal power pack):
100 280 V, 50 60 Hz/0.2 A
Dimensions:
W x H x D mm: 270 x 44 x 220
Connections (jack):
PS/2 (keyboard/mouse) USB-A (keyboard/
mouse)
SUB-HD15 (VGA video RGB & Sync.)
2 x Cat (RJ 45) to connect 2 local PCs via
SSC converters (VGA, PS/2 or USB)
RJ 45 (KVM matrix connection) IEC 320 C14
(power supply)
Mini-DIN 4 (redundant power supply)
Also required:
Cat 5 patch cable,
see page 596.
SSC converter for local PCs,
see page 595.
Mains connection cable (e.g. DK 7200.210),
see page 585.
Console Cat 5 1 7552.212
KVM switches
Console IP
for SSC premium (KVM-over-IP)
With the IP remote console, computers con-
nected to the KVM matrix may be accessed via
any given TCP/IP network. The SSC Console IP
is a hardware solution, and guarantees remote
monitoring of the computers even during the boot-
ing phase, down to BIOS level. With the system
operational, the target computers may be
accessed at any time via web browsers and Java
applets (irrespective of the operating system), or
if Java is not supported, via optimised client soft-
ware for common operating systems. This client
has extended functions (e.g. a setup mode) and
can be used throughout the company without
restriction. In addition to remote access via IP, the
SSC Console IP also has an integral local console
port (competing with IP access) for connecting
the keyboard, mouse and monitor locally in the
rack.
Access to the console is additionally password-
protected. KVM access to the web interface may
be encrypted via HTTPS (SSL 128-bit). In order
to further increase failsafeness, the SSC console
IP may also be extended with a redundant power
pack via the SSC Power Pack (DK 7552.220).
Material:
Sheet steel
Colour:
RAL 7035
Video resolution: max. 1280 x 1024 @ 75 Hz
Network: 10/100 MBit/s
Power pack: 100 240 V AC, 50/60 Hz
Dimensions:
W x H x D mm: approx. 440 x 44 x 380
Connections (jack):
PS/2 (keyboard/mouse)
SUB-HD15 (VGA video, RGB and Sync.)
RJ 45 (Ethernet)
Sub-D (RS232)
IEC320 C14 (power supply)
Mini-DIN 4 (redundant power supply)
Supply includes:
Includes client software for the latest Windows
operating systems (MS Windows XP Professional,
Server 2003, Server 2008, Windows 7) and
Linux Distribution (RedHat, Suse) in German
and English.
Also required:
Mains connection cable (DK 7200.210),
see page 585.
Cat 5 patch cable,
see page 596.
Console IP 1 7552.214
SSC converter
for SSC premium/Duo 16/view 32 cat
The SSC converters convert the signals for key-
board, video and mouse from the connected com-
puter to the Cat cable.
There is a choice of three different variants for
connecting PCs with PS/2 or USB ports, and a
separate version for use with SUN computers with
a USB port. One converter is required for each
computer. Every SSC converter has a unique
identification number (Unique ID).
Video resolution: 1600 x 1200 @ 85 Hz
Power supply:
5 V DC/approx. 150 mA (from computer)
Certification: CE
Dimensions: approx. 65 x 45 x 20 mm
SSC converter Packs of Model No. DK
PS/2 1 7552.201
USB 1 7552.202
SUN-USB (German) 1 7552.203
SUN-USB (US English) 1 7552.204
SSC converter VT100 (RS232)
for SSC premium/Duo 16
With this SSC adaptor, active network compo-
nents (such as an Ethernet switch) with a serial
management port which support the VT100
terminal mode may be integrated into the SSC
premium KVM system.
Connections:
Sub-D 9-pole (RS232)
Mini-DIN 4 (power supply)
Supply includes:
Power pack
(100 240 V, 50/60 Hz/s secondary, 12 V/0.7 A)
Mains connection cable DK 7200.210
Also required:
Cat 5 patch cable,
see page 596.
SSC converter VT100 1 7552.205
KVM switches
CPU cable
for SSC view 8/USB, PS/2 and USB
Combination connection cable between SSC
view 8 and the individual servers, each with 2 HD
15 connectors for video, plus lockable PS/2 con-
nectors at both ends for the keyboard and mouse,
colour-coded.
USB cable with USB-A and USB-B connector
(connection switch) and VGA cable.
Connection Cable length Model No. DK
PS/2 2 m 7552.120
PS/2 4 m 7552.140
USB 2 m 7552.122
USB 5 m 7552.142
Cat 5 patch cable
Flexible, pre-configured Cat 5 STP patch cable
with shielded RJ45 connectors for connecting the
SSC converter and SSC console to the SSC pre-
mium switch. The cables are wired 1 : 1 to AT&T
258A/T568B and comply with ISO/IEC 11801,
UL E151955.
Colour:
Grey
Length m Packs of Model No. DK
2 4 7320.472
5 4 7320.475
10 1 7320.481
15 1 7320.485
1)
1)
SSC Power Control
for SSC premium
With this adaptor, the Power Control Unit socket
strips (DK 7200.001) and the active PSM module
(DK 7856.201) may be switched individually or in
pairs (for servers with redundant power supply).
Control is via the OSD integrated into the SSC
premium.
Up to 8 PSM and PCU modules may be switched
(max. 64 EN 60 320 C13 slots).
Note:
The connection cable between the SSC
premium and the SSC Power Control with
a length of 2.5 m is included with the supply.
Only suitable for use with SSC premium
switches and modules 7856.201 and 7200.001.
Also required:
Power pack (DK 7201.210).
Mains cable (DK 7200.210),
see page 585.
At least 1 active PSM/PCU module,
DK 7856.201 only, see page 203 and
DK 7200.001, see page 510.
Cat 5 patch cable,
see page 596.
SSC Power Control 1 7552.420
SSC Power Pack
In order to increase fail-safeness, we recommend
configuring a redundant power supply to the SSC
premium and the connected user consoles. This
compact wide-range power pack (AC: 100 240 V,
50/60 Hz, DC: 12 V/5 A) with IEC 320 socket
(EN 60 320) and Mini-DIN 4 connector is ideal for
this purpose. Should the first power supply of the
internal power pack fail, the functionality of the
KVM switch is maintained.
Supply includes:
Assembly parts.
Also required:
Connection cable for power pack,
see page 585.
SSC Packs of Model No. DK
SSC Power Pack 1 7552.220
RFID mounting frame
for TS 8
With integral RFID reader (aerial) to accommo-
date the 482.6 mm (19) built-in components.
The mounting frame may be depth-variably
secured in the TS 8 and is used to structure the
front 482.6 mm (19) mounting level.
Position detection of the components is accurate
to within 1/3 U, therefore there are 3 aerial ele-
ments and signalling LEDs integrated into each U.
The installation position of the components is
correctly recognised even if they are not located
precisely in the height pitch pattern. Reading and
writing of the RFID tags is likewise signalled by
one LED in each case.
Load capacity:
Max. 1000 kg static load with even distribution
across two 482.6 mm (19) mounting levels.
Material:
Sheet steel, zinc-plated, passivated
Supply includes:
Assembly parts.
Also required:
A matching mounting frame without RFID reader
(see ordering table) to emulate the rear mounting
level.
The mounting frame must be connected to the
RFID controller DK 7890.500, see page 597.
For TS 8
U
RFID mounting
frame, front
Mounting
frame, rear
Width
mm
Height
mm
Model No. DK Model No. DK
600 2000 42 7890.206 7856.719
800 2000 42 7890.208 7856.731
600 2200 47 7890.226 7856.722
800 2200 47 7890.228 7856.734
Other sizes available on request.
RFID tags
1 RFID tag is required for each component.
Each tag has a Unique ID (UID, not sequential),
which cannot be altered, data is stored on the
tag in conformity with ISO 15693. The tags are
unwritten in their delivered state. The tag is stuck
to the inside/right of the 482.6 mm (19) mounting
bracket. For this purpose, the tag has got an
adhesive surface. The component is later screw-
fastened to the 482.6 mm (19) level.
Passive, writable RFID tag (13.56 MHz)
20 7890.020
RFID controller
This controller connects the RFID reader (aerial)
of the 482.6 mm (19) mounting frame to the CMC.
In this way, the CMC is able to notify automatic
changes, graphically depict the enclosure with
the built-in components, and list capacity man-
agement.
One RFID controller is required per rack.
Enclosure dimensions W x H x D:
136 x 44 (1 U) x 129 mm
Material:
Plastic
Rated voltage:
24 V DC
Connections:
RJ 45 jack (connection to CMC)
2 x Mini-DIN (connection of RFID
frame & floor-reader)
Also required:
Cat 5 patch cable,
see page 596.
1 7890.500
598
599
System accessories for the
human/machine interface
Handles/external mounting accessories
Handle set .................................................................................................600
Handles .....................................................................................................602
Clipboard...................................................................................................603
Display board with wall bracket ................................................................603
Enclosure surface connector ....................................................................603
Front assembly
Front panels...............................................................................................604
Mounting kit ...............................................................................................605
Monitors
TFT monitor................................................................................................606
Power pack................................................................................................606
Connection cable ......................................................................................606
TFT holder .................................................................................................607
Keyboards, supports and drawers
Keyboards .................................................................................................608
Supports ....................................................................................................610
Drawers .....................................................................................................612
Interfaces
Interface box .............................................................................................616
Interface extension....................................................................................616
Interface flaps............................................................................................617
Signal pillars
Signal pillars, LED compact ......................................................................618
Signal pillars, modular ...............................................................................619
Handles
Handle set
for Comfort Panel
For external mounting on corner pieces,
also suitable for retro-fitting.
Material:
Handle tube: Aluminium
Handle holder: Die-cast zinc
Covers: Polyamide
Surface finish:
Handle tube: Natural-anodised
Handle holder: Powder-coated
Colour:
Handle holder: RAL 7024
Covers: Similar to RAL 7024
Note:
Shorter heights and widths can be achieved by
cutting the handle tube to length.
For enclosures with 74 mm depth, cannot be
mounted on the same side as the support arm
connection.
Accessories:
Clipboard,
see page 603.
Display board
see page 603.
For horizontal mounting
Supply includes:
Handle tube, 20 mm
2 handle holders
2 covers
Assembly parts
For vertical mounting
Supply includes:
2 handle tubes, 20 mm
4 handle holders
4 covers
Assembly parts
With front panel width Packs of Model No. CP
482.6 mm (19) 1 set 6375.010
520 mm 1 set 6375.000
With
front panel height
400 mm 1 set 6375.040
500 mm 1 set 6375.050
600 mm 1 set 6375.060
Handle set
for Optipanel
For external mounting on corner pieces,
also suitable for retro-fitting.
Material:
Covers: Polyamide
Surface finish:
Handle holder: Powder-coated
Colour:
Covers: RAL 7024
Note:
Shorter heights and widths can be achieved by
cutting the handle tube to length.
For enclosures with 100 mm depth, cannot be
mounted on the same side as the support arm
connection.
Accessories:
Clipboard,
see page 603.
Display board
see page 603.
For horizontal mounting
Supply includes:
Handle tube, 25 mm
2 handle holders
2 covers
For vertical mounting
Supply includes:
2 handle tubes, 25 mm
4 handle holders
4 covers
With
front panel width
482.6 mm (19) 1 set 6385.010
520 mm 1 set 6385.000
With
front panel height
400 mm 1 set 6385.040
500 mm 1 set 6385.050
600 mm 1 set 6385.060
Handles
Handle set
For vertical and horizontal mounting on all
surfaces.
Overall length: 420 mm.
Material:
Tube holder: Die-cast zinc
Surface finish:
Colour:
Conduit holder: RAL 7035
Supply includes:
4 conduit holders
2 handle tubes
Accessories:
Clipboard,
see page 603.
Display board,
see page 603
1 set 2389.000
Handle frame
for operating housing with display panel front
Colour:
RAL 8019
Supply includes:
Square aluminium tube
Plastic corner bracket
End caps
Assembly parts
Note:
Command panel with display panel front
CP 6662.500,
see page 123.
Operating housing width (B1) mm 600
Width of the horizontal rectangular tube
(B2 = B1 + 48) mm
648
Height of the vertical rectangular tube
(H1) mm
299
Hole distance between the assembly
holes (H2) mm
249
2
5
1
9
3
0
H
1
B
2
B
1
H
2
Aluminium strip
For
One-piece console
Surfaces
Prevents wiring plans etc. from slipping.
For
console
Length
mm
Packs of Model No. AP
AP 1183 3 2682.000
May be cut to length for other dimensions.
Handles, external mounting accessories
Handles
For horizontal or vertical attachment to the
enclosure panel of:
Comfort Panel,
Optipanel,
Other enclosures or
Surfaces
Mounting holes and surfaces without fins are
required for assembly purposes.
For the Comfort Panel version with fins, selecta-
ble via configurators at www.rittal.com, corre-
sponding milling work may be carried out. To
this end, please specify Prepared for handle set
CP 6107.XXX for the command panel.
Material:
Cover bungs: Plastic
Surface finish:
Handle tube: Powder-coated
Colour:
Cover bungs: Similar to RAL 7035
Handle tube: Similar to RAL 9006
Corner handle
Supply includes:
4 handle holders
2 handle tubes
Assembly parts
1 set 6107.000
Mounting on enclosure corner For external mounting on straight surfaces
(90 rotation of handle holder)
25
6.5
(
8
5
)
4
5
163
1
3
1
.
5
131.5
92
6.5
1
5
3
25
217
4
5
163
132
U handle
Supply includes:
2 handle holders
1 handle tube
Assembly parts
Accessories:
For CP 6107.200:
Clipboard,
see page 603.
Display board,
see page 603.
For front panel size Packs of Model No. CP
7 U 1 set 6107.100
482.6 mm (19) 1 set 6107.200
6.5
4
5
9
2
458 (293)
395 (230)
240 (75)

2
5
25
Note:
Dimensions in brackets for CP 7 U.
External mounting accessories
Clipboard
For securing operating instructions or plans
(A4 size) at eye level.
Prepared for mounting on the right-hand side;
mounting on the left is also possible by unscrew-
ing and moving the clip part.
For mounting purposes, a straight tube length of
200 mm, 20 mm or 25 mm, is required.
Material:
Clipboard: Sheet steel
Clip part: Aluminium
Surface finish:
Clip part: Natural-anodised
Colour:
RAL 7035
Also required:
Handle set SZ 2389.000, see page 601
or
Handle set for Comfort Panel, see page 600
or
Handle set for Optipanel, see page 600
or
U handle CP 6107.200, see page 602.
Width mm Height mm Packs of Model No. CP
225 315 1 6013.000
Display board with bracket
To accommodate test plans, documents etc. in
A4 format.
Assembly:
On surfaces,
On a 25 mm pitch pattern of the TS frame or rail
system,
On handle set 20 mm or 25 mm.
Supply includes:
Display boards
Wall bracket
Assembly parts
Accessories:
Handle set SZ 2389.000, see page 601
or
Handle set for Comfort Panel, see page 600
or
Handle set for Optipanel, see page 600
or
U handle CP 6107.200, see page 602.
1 set 6013.100
Enclosure surface connector
To accommodate keyboard support
(SM 2383.000, see page 610).
Material:
Surface connector: Extruded aluminium section
Side cover: Sheet steel
Surface finish:
Surface connector: Natural-anodised
Colour:
RAL 7024
Supply includes:
Assembly parts.
1 set 2383.010
9
0
6
3
0
4
5
79
56
7
3
.
5
8
3
67
4
5
8
40
15
3
0
1
0
Mounting
on surfaces
Mounting
underneath surfaces
Front assembly
Front panels
for Comfort Panel and Optipanel
Material:
Aluminium, 3 mm
Surface finish:
Natural-anodised
Note:
Mounting kits included with the supply of 520 mm
wide standard enclosures.
With mounting hole
With threaded bolts M5
Also required:
Mounting kit
for Comfort Panel CP 6053.800,
see page 605,
for Optipanel CP 6053.000/.500,
see page 605.
Width
mm
Height
mm
Model No. CP
482.6 (19) 155.0 (3.5 U) 6027.000
482.6 (19) 310.3 (7 U) 6028.000
Width
mm
Height
mm
Model No. CP
482.6 (19) 155.0 (3.5 U) 6027.010
482.6 (19) 310.3 (7 U) 6028.010
520 400 6028.014
520 500 6028.015
520 600 6028.016
Front panels
for Compact Panel
Material:
Aluminium, 3 mm
Surface finish:
Natural-anodised
Size
W x H mm
To fit
Compact Panel
Model No. CP
178 x 200 CP 6340.000 6028.500
178 x 350 CP 6340.100 6028.510
252 x 200 CP 6340.300 6028.530
252 x 350 CP 6340.400 6028.540
Cover plate
for support arm connection
For secure sealing of an unrequired support arm
connection in the enclosure.
Material:
Sheet steel
Supply includes:
Note:
If with
Comfort Panel
Optipanel
Compact Panel
command panels, there are already 2 support arm
cut-outs provided, a cover plate is included with
the supply of the enclosure.
Support arm
connection
Surface finish Model No. CP
CP-S
Spray-finished in
RAL 7024
6505.200
CP-L,
130 mm
Zinc-plated,
passivated
6505.500
CP-L,
120 x 65 mm
Zinc-plated,
passivated
6505.100
Front assembly
Mounting kit
for Optipanel
For installing
Aluminium front panels
Command panels
Keyboards
For holes
Supply includes:
Packs of
30 retaining claws, captive nuts, screws
and sealing washers.
For
front panels
Thread Model No. CP
Others M4 6058.000
Rittal and others M5 6053.000
For threaded bolts
Supply includes:
Packs of
10 retaining claws and cap screws.
For
front panels
Thread Model No. CP
Others M4 6058.500
Rittal and others M5 6053.500
1)

1)
For the installation of TFT monitors 15, 17 and 19.
For screw clamp
Supply includes:
Packs of
4 pressure plates,
4 attachment strips.
Note:
Command panels
TP 277 6, OP 277 6, MP 277 10 Touch,
MP 377 12 Touch, MP 377 15 Touch
are installed using an adaptor plate (included
with the supply subject if selected accordingly,
or available on request).
For direct installation of Model No. CP
Siemens Sinumerik:
OP 010, OP 010C, OP 012, OP 015,
MCP 483, PP 012, Querty 19,
KB 483C, TP 015A
6053.210
Siemens Simatic:
Panel PC 477, 577, 677, 677B:
12.1 Touch, 15.1 Touch,
12.1 keys, 15.1 keys, 19 Touch
1)

Panel PC 877:
15.1 Touch, 12.1 keys,
15.1 keys, 19 Touch
1)
, Flat Panel
1)

12, 15, 17, 19
Pro Face Industrial PC:
ALP 3600, ALP 3700, ALP 3900
The mounting set can only be installed vertically.
1)
2 packs are required.
1
2
Mounting kit
for Comfort Panel
For the installation of aluminium front panels,
command panels and keyboards.
Supply includes:
CP 6058.800, CP 6053.800:
20 each of retaining claws, captive nuts, screws,
nuts and sealing washers.
CP 6053.300:
8 medium retaining claws, 8 short retaining claws,
4 long retaining claws
6058.800, 6053.800
6053.300
For drilled holes/bolts/front panel mounting
from behind
For screw clamp
1
2
Thread Model No. CP
M4 6058.800
M5 6053.800
For installing Model No. CP
Siemens Sinumerik:
OP 010, OP 010 C, OP 012,
TP 012, OP 015, OP 015 A,
MCP 483 C, MCP 483, PP 012,
PP 012 extension, MCP,
KB 483 C, Querty 19
6053.300
Siemens Simatic:
Panel PC 477, 577, 677, 677B:
12.1 keys, 12.1 Touch,
15.1 keys, 15.1 Touch,
19 Touch
Panel PC 877:
12.1 keys, 15.1 keys,
15.1 Touch, 19 Touch,
TP 277 6
MP 377 15 Touch,
MP 377 12 Touch,
MP 377 19 Touch
B & R:
Automation Panel
Panel PC
Monitors
TFT monitor
Installation variant for surfaces and command
panels.
Benefits:
High-quality industrial design
Reduced installation work thanks to integral
front frame
No additional ventilation required
Very small installation depth (45 mm)
Resistive touchscreen for operation with a pen,
finger or glove.
Material:
Front frame: Aluminium
Surface finish:
Powder-coated
Colour:
RAL 7035
IP 65 to IEC 60 529 (front)
Supply includes:
Seal, hex nuts (for installation in surfaces),
VGA cables, rear threaded bolts M5 (14). Touch
variants additionally with integral connection
cable and driver CD-ROM.
Note:
Other variants as resistive touchscreen with
serial or USB interface available on request.
Also required:
Mounting kit CP 6053.800
(when installing in Comfort Panel), see page 605.
Mounting kit CP 6053.500
(when installing in VIP 6000 and Optipanel),
see page 605.
Power pack SM 6450.050, see page 606 and
connection cable SM 6450.060, see page 606,
if an operating voltage of only 100 240 V AC is
available instead of 12 V DC.
Detailed drawings:
Size
Width
mm
Height
mm
Model No. SM
Touch
Without
1)

resistive,
USB
15 430 343 6450.010 6450.070
17 482.6 354.8 6450.020
19 482.6 399.3 6450.170
1)
With anti-reflection coated safety glass screen.
Technical specifications 15 17 19
Resolution of display (max. pixels) 1024 x 768 1280 x 1024 1280 x 1024
Resolution of controller/colours VGA-SXGA/16.2 million
Brightness (cd/m
2
) 400 300 250
Contrast ratio 500 : 1
Reading angle horizontal (right/left) 65/65 75/75 88/88
Reading angle vertical (top/bottom) 45/65 65/65 88/88
Lamp life
1)
(h) min. 35.000 typ. 50,000 min. 40,000
On-screen display (OSD) At rear
VGA input/DVI-D D-Sub HD 15-pole DVI-D jack
Operating temperature (C)/storage temperature (C) 0 to +50/20 to +60
Voltage input 12 V DC
Power consumption (W) 30 35 40
H-Sync. (kHz)/V-sync. (Hz) 31.5 to 80/60 to 75
Humidity in operation (%) 20 to 80 (non-condensing)
Humidity in storage (%) 5 to 95 (non-condensing)
1)
Until half the original brightness is reached.
Power pack
For TFT monitor
With IEC 320 socket,
With connection cable (1.5 m) and connector
for connecting to the TFT monitor.
Dimensions, W x H x D: 107 x 30 x 59 mm.
Input voltage: 100 240 V AC
Output voltage: 12 V DC
Operating temperature: 10C 40C
Material:
Enclosure: Plastic
1 6450.050
Connection cable
for power pack
With IEC connector at one end.
Length: 1.5 m.
1 6450.060
Monitors
TFT holder
Suitable for mounting TFTs with VESA 75/100
adaptation up to 21 on
Housing coupling CP-S, CP 6501.050,
see page 129
CP-L enclosure attachment 120 x 65 mm,
CP 6525.610, see page 133
Vertical support arm via enclosure attachment,
tilting CP 6902.670, see page 129
Material:
Sheet steel
Surface finish:
Spray-finished
Colour:
RAL 7024
Detailed drawings:
Dimensions
mm
477 x 372 x 110.5 1 2383.030
TFT holder
Vertically hinged
Suitable for mounting TFTs with VESA 75/100
adaptation up to 20.1 in
PC enclosures
Other enclosures based on TS
The TFT support is attached to the upper horizon-
tal enclosure section using appropriately fitted
bars and/or punched sections.
The integral swing mechanism allows the TFT to
be swung forwards out of the enclosure while
operational, to provide access to the equipment
behind it. The display on the TFT remains visible
even after it has been swung forwards. The length
of the actuator handle is adjustable to adapt to the
size of the TFT.
Material:
Sheet steel
Supply includes:
Assembly parts.
Detailed drawings:
1 2383.040
Also required:
For
enclosure depth
mm
Punched rail TS
18 x 38 mm
Page
400 8612.240 462
500 8612.250 462
600 8612.260 462
800 8612.280 462
Keyboard, pull-out
with integral trackball
Super-slimline keyboard with cursor keys and
trackball. The handle also serves as a hand rest.
The 10 angled pullout ensures ergonomic
working.
Any sufficiently large surface (e.g. door,
side panel)
Front panels
Directly in Comfort Panel and Optipanel of
a suitable size, selectable via configurators
see www. rittal.com
Material:
Sheet steel
Surface finish:
Front panel: Powder-coated
Colour:
RAL 7035
Keyboard:
84 short-stroke keys, IBM-AT compatible (MF2),
incl. cursor keys
With integral 16 mm trackball
Interface: 2 x 6-pole PS/2 DIN connector
Operating temperature: +5C to +50C
Storage temperature: 10C to +60C
Humidity: max. 95% (non-condensing)
IP 65 (front, solid) to IEC 60 529
Keyboard layout Packs of Model No. SM
German 1 6002.100
420
465 0.3
155
35
8.5 M4
150
1
6
.
5
1
6
.
5
8
.
5
8
.
5
(
7
1
)
(
5
5
)
12.5
8
8
482.6
ca. 155
1
0
155
465
450
7
1
6
2
5
Mounting cut-out
SM 6002.100
Built-in keyboard 19/4 U
with integrated touchpad
The integral touchpad means that the installation
of an additional, correct protection category
mouse is no longer required, and cabling is also
reduced. The short stroke keys are easily identi-
fied by edge embossing, less force is required to
operate them and they have good positive key
actuation.
Benefits:
The separate number pad enables the
parameters to be entered quickly
Sealed, wipeable surface finish
High level of mechanical and chemical
resistance as per DIN 42 115.
Number of keys: 105
Front panel dimensions: 482.6 x 177.0 mm
(482.6 mm (19) x 4 U)
Installation depth: 23 mm
12 M5 x 20 threaded bolts at back
Actuation travel/force: 0.3 mm/2.6 N
Service life: 3 million switching cycles
Operating temperature: 40C to +90C
Touchpad resolution, capacitive: 40 pixels/mm
Interfaces: 2 x PS/2 (1 USB adaptor supplied
loose)
Material:
Front panel: Aluminium
IP 65 to IEC 60 529 (front)
Supply includes:
Y connection cable, length 1.8 m
PS/2 connector
USB adaptor
Seal
Drilling template
Assembly parts for surfaces
Also required:
Mounting kit CP 6053.800 (when installing in
Comfort Panel), see page 605.
Mounting kit CP 6053.500 (when installing in
Optipanel), see page 605.
Keyboard layout Packs of Model No. SM
German 1 6446.020
1
7
7
420
451
165
482.6
1
0
10
7
1
4
5
1
0
1
.
6
Contact surface 1
1
Fold-out tray
for keyboard and mouse
For installation in
600 and 800 mm wide doors
482.6 mm (19) swing frames and enclosures
Standard double-bit lock insert which may be
exchanged for lock inserts 27 mm, version A,
see page 421 and for lock cylinder SZ 2571.000,
see page 422.
Material:
Flap: Sheet steel
Side parts: Cast aluminium
Tray: Extruded aluminium section
Surface finish:
Cover, side parts: Textured paint
Tray: Natural-anodised
Colour:
Cover, side parts: RAL 7035
IP 55 to IEC 60 529
Accessories:
Mousepad support, pull-out,
see page 610.
3
0
5
3
2
4
5
.5
(
6
x
)
195 (295)
454 (654)
482.6 (682.6)
32 195 (295)
1
Contact surface 1
Mounting cut-out
3
5
5

(
8

U
)
For door width
mm
Dimensions W x H x D
mm
Installation depth
mm
Max. keyboard dimensions
W x H x D
mm
Model No. SZ
600 482.6 (19) x 355 (8 U) x 126 93
405 x 50 x 250
405 x 50 x 195
1)
2379.600
800 682.6 x 355 (8 U) x 126 93
605 x 50 x 250
605 x 50 x 195
1)
475
1)
x 50 x 250
2379.800
1)
Maximum keyboard size with holder for mouse.
Support for mousepad,
pull-out
with mouse holder
For screw-fastening into the fold-out tray
SZ 2379.600/SZ 2379.800, see page 609.
To fit all standard mousepads up to 250 x 205 mm.
Supply includes:
Assembly parts.
1 set 2379.900
Support
for keyboards
for max. 473 x 210 mm.
Prepared for
Cable gland
Support for mousepad, vertically hinged
(SM 2383.020)
Material:
Side parts: Sheet steel
Front and rear: Extruded aluminium section
Surface finish:
Side parts: Textured paint
Front and rear: Natural-anodised
Colour:
Side parts: RAL 7024
Supply includes:
2 clamping screws, end stoppers, cover plate,
cable entry grommet and nylon loop tape.
Also required:
For external mounting on surfaces using
enclosure surface connectors, see page 603.
Accessories:
Mousepad support, swivelling,
see page 615.
1 set 2383.000
Utility bars, vertically hinged
To support standard keyboards during program-
ming and servicing work.
Mounting distance of utility bars for problem-free
insertion at least 300 mm.
Depth adequate for keyboards up to max.
210 mm.
For mounting beneath:
Comfort Panel
1)

Optipanel
2)

Any sufficiently large surface, such as:
Worktops IW
Operating housing
on:
Vertical services (doors/side panels)
Min. front panel width
1)
385 mm
2)
405 mm
After use, the utility bars fit securely and neatly
under the mounting surface, thus giving the
operator more space to move around.
Material:
Sheet steel
Surface finish:
Zinc-plated
Supply includes:
Assembly parts.
1 set 6514.200
Keyboard rack, 482.6 mm (19)
19 rack-mounted chassis 1 U, 430 mm deep
Prepared for the installation of 482.6 mm (19)
keyboards with touchpad or trackball and
mouse with the following dimensions:
max. height: 39 mm,
max. width: 417 mm,
max. depth: 210 mm
Solid, lockable front
Telescopic slides with integral clamp
Prepared for installation of a mousepad
Material:
Sheet steel
Colour:
RAL 7035
Supply includes:
482.6 mm (19) chassis excluding keyboard,
Connection cable,
Mounting bracket for 800 and 900 mm
enclosure depth,
Assembly parts.
Design Packs of Model No. RP
PS/2 1 3659.520
USB 1 3659.680
Mousepad
for keyboard rack
For optional mounting on the left, right or front
of the keyboard rack (fold-away design)
Maybe folded into the keyboard drawer after
use
Only suitable for use in conjunction with
482.6 mm (19) keyboards with a total height
of max. 39 mm (Model No. RP 9911.396)
Material:
Sheet steel
Colour:
RAL 7035
Supply includes:
Assembly parts.
Assembly Packs of Model No. RP
right/left 1 3659.620
Keyboard, 482.6 mm (19)
with PS/2 connections
482.6 mm (19) keyboard for installation in the
482.6 mm (19) keyboard rack in conjunction
with the mousepad
German keyboard layout
36/38.9 mm high keys facilitate installation
in 1 U keyboard drawers
PS/2 connector
105 keys (including WIN 95 keys)
Operating temperature: 0C to +50C
IP 20
Supply includes:
Connection cable.
W x H x D mm Design Packs of Model No. RP
403 x 36 x 171 German 1 9911.396
TFT display, 15
482.6 mm (19) front panel, 7 U
TFT LCD 15.1
Anti-reflection coated safety glass screen
Brightness: 250 cd/m
2
On-screen display
Colours: 16.7 million
Power pack: Input voltage: 100 240 V AC,
output: 12 V DC/3.75 A
OSD membrane keyboard
VGA + SVGA, non-interlaced
Maximum resolution 1024 x 768 pixels
Contrast ratio: 300 : 1
Viewing angle: 160 (H+V)
Video input 15-pin D-SUB (analog RGB)
RS232 monitor interface
Material:
Front panel: Aluminium, powder-coated
Colour:
RAL 7035
Tested to EN 60 950 and EMC directive
89/336/EEC.
Note:
Depth varies according to the display design
(protective glass, touchscreen etc.).
Packs of Model No. RP
1 3659.440
OSD OSD
3
1
0
.
3
482.5 65-75 37
40 2.5
Drawer 482.6 mm (19)/2 U
for keyboard and mouse
side panel)
Front panels
Directly in Comfort-Panel and Optipanel of
a suitable size, selectable via configurators
see www. rittal.com
Suitable for
Accommodation of keyboards up to max.
390 x 32 x 139 mm.
Support of standard commercially available
mouse or trackball.
Design:
Drawer: With stay
Front panel: With security lock (lock no. 12321)
and handle strip
Material:
Drawer housing: Sheet steel
Drawer and front panel: Aluminium
Surface finish:
Drawer housing: Zinc-plated
Drawer and front panel: Natural-anodised
Supply includes:
Assembly parts for installation in Comfort Panel/
Optipanel command panel.
Width
mm
U
Depth
mm
Model No.
CP
482.6 (19) 2 150 6002.000
1
3
9
9
0
79
441
390
7
1
.
4
482.6
8
8
3
1
465
4.5
6
0
284 106
4.5/M4
465
7
7
450
7
1
.
4
7
5
2
139 148.5
4
6
Mounting cut-out
(for installation in surfaces)
Drawer for keyboard and
mouse
with mousepad support
side panel)
Front panels
Suitable for accommodating
Keyboards up to a maximum of
460 x 42 x 170 mm.
Standard mouse and mousepad.
Design:
Drawer and enclosure: With side pull-out
mousepad support and tray
Front panel: With 3 mm double-bit lock insert,
folds out as handrest
Material:
Drawer and enclosure: Sheet steel
Front panel: Aluminium
Surface finish:
Drawer and enclosure: Textured paint
Front panel: Natural-anodised
Supply includes:
Assembly parts.
Accessories:
exchanged for 27 mm lock inserts, version A,
see page 421.
Width
mm
U
Depth
mm
Model No. CP
482.6 (19) 3.5 261 6003.000
80 260
2
0
6
482.6 (19)
2
7
0
2
6
0
472
1
467
1
4
1
475
1
3
3
5.5/M5
Mounting cut-out
for installation in surfaces
Front trim panel 1
Keyboard drawer 1 U
for 482.6 mm (19) attachment level
This space-saving keyboard drawer is screw-
fastened to the front and rear 482.6 mm (19)
attachment level.
The installation spacing is infinitely adjustable
from 460 800 mm.
It is fully extendible, lockable, with strain relief and
hinged cable support.
The drawer is suitable to accommodate 482.6 mm
(19) keyboards.
Interior dimensions:
W x H x D approx. 420 x 40 x 220 mm
Material:
Sheet steel
Colour:
RAL 7035
Supply includes:
Assembly parts, excluding keyboard.
Note:
Monitor/keyboard unit, 1 U,
see page 590.
Distance between levels mm Model No. DK
460 800 7281.200
1)
1)
Delivered without keyboard.
Keyboard drawer 2 U
for a 482.6 mm (19) mounting level
For keyboards up to 430 mm wide and 250 mm
deep with the front panel folded over.
Material:
Sheet steel with aluminium front
Surface finish:
Spray-finished
Colour:
RAL 7035
Supply includes:
Lockable drawer with handles,
Folding front,
Pull-out mousepad,
Mouse support,
Practical cable entry
and strain relief.
Height Packs of Model No. DK
2 U 1 7281.035
Installation depth: 390 mm.
Drawer 482.6 mm (19)
for keyboard
For attaching to the 482.6 mm (19) mounting
angles front and rear. Suitable for standard
keyboards > 482.6 mm (19). Keyboard support
with non-slip base, plus wrist support.
Depth-variable installation from 610 950 mm.
Clearance opening W x H x D: 408 x 40 x 550 mm.
Material:
Sheet steel
Colour:
RAL 7035
Supply includes:
Assembly parts, excluding keyboard.
Note:
Installation only possible on L-shaped and
cranked 482.6 mm (19) mounting angles and/or
482.6 mm (19) mounting frames.
1 7063.888
Support for mousepad
for command panels and surfaces
The angle of the mousepad support is indi-
vidually adjustable.
Two holes are needed on the enclosure for
attachment purposes.
Material:
Sheet steel
Surface finish:
Zinc-plated
Supply includes:
Assembly parts.
Accessories:
Holder for mouse,
see page 615.
Weight
kg
1.0 1 2381.000
vertically hinged
For mounting on the left/right, beneath support
for keyboards. Latches home automatically, both
when retracted and extended. With mounting
holes for mouse holder (SM 2382.000).
With cutouts for cable routing and holes for
attachment via cable ties, for fast assembly
(SZ 2597.000).
Material:
Sheet steel
Surface finish:
Zinc-plated
Supply includes:
Assembly parts and mousepad, stuck on
with adhesive.
Accessories:
Holder for mouse, see page 615.
Cable ties, see page 530.
1 2383.020
4
4
2
3
312
2
1
1
30
2
0
Holder for mouse
To fit mousepad support and for secure accom-
modation of a standard mouse.
Material:
Sheet steel
Surface finish:
Zinc-plated
Supply includes:
Assembly parts.
Also required:
see page 614.
Weight
kg
0.3 1 2382.000
Paper removal flap
For installation in surfaces
Facilitates easy removal of pages from the printer
without opening the enclosure door. Plexiglass
flap with magnetic lock.
Paper removal flap
Colour
RAL
DIN A4 7015 1 6903.200
Interfaces
Base
for tubular door frame
The space-saving alternative instead of com-
ponent shelves to accommodate tower PCs
(maximum 20 kg).
For screw-fastening to the tubular door frame
of 600 mm wide enclosures based on TS.
Load capacity: 20 kg.
Material:
Sheet steel
Surface finish:
Spray-finished
Colour:
RAL 7015
Supply includes:
Retaining strap and assembly parts.
Also required:
TS support strips for direct screw-fastening to
the tubular door frame, see page 462.
Width x height x depth
mm
495 x 159 x 230 1 6902.950
Interface box
For secure accommodation for all common com-
puter ports, 3
1
/2 disk drives and sockets. The
lockable metal cover provides a high mechanical
load-bearing capacity, protects against unauthor-
ised access and ensures an increased shielding
effect for the installed equipment.
Material:
Front panel: Extruded aluminium section
Mounting tray: Aluminium, 1.5 mm
Flap: Aluminium, 3.0 mm
Surface finish:
Front panel: Powder-coated
Mounting tray: Powder-coated
Flap: Natural-anodised
Colour:
RAL 7035
Supply includes:
Frame with hinged flap
Cam with security lock (No. 12321)
Mounting tray including seal and assembly
parts
Weight
kg
Packs of
Model No.
SZ
0.8 1 2482.000
Interface extension
with wall connection and
built-in RJ 45 module
For extending the internal enclosure interfaces
e.g. from industrial PCs and switches up to the
outside of the enclosure. The wall connection only
needs the same space as a switch.
Benefits:
Rapid access for maintenance work
The protection category of the enclosure is
preserved
The lock nut cuts automatically into the spray-
finish or eloxal layer, thereby creating a con-
ductive connection
Captive protective cap
Material:
Enclosure: Brass
Cover: Aluminium
Seal: Polyamide
Surface finish:
Enclosure: Nickel-plated
Cover: Natural-anodised
IP 66/67 to IEC 60 529
(with the protective cap closed)
2
0
.
8
22.3 22.3
Anti-twist guard
Material thickness: 1 6 mm
without
(USB/RJ 45)
with
(USB only)
Design Wall connection Inside
Length
m
USB Type A jack Type A connector
0.5 1 2482.210
1.0 1 2482.220
2.0 1 2482.230
RJ 45 Jack Connector
0.5 1 2482.700
1.0 1 2482.710
2.0 1 2482.720
RJ 45 Jack Jack 1 2482.730
Interfaces
1 2
3 4
5 6
7 8
9 10
11 12
Interface flaps, modular
For universal use in all situations where rapid
access to interfaces and sockets is needed.
The affected enclosure remains closed and is
therefore protected from ambient influences and
unauthorised access.
Space-saving installation e.g.
in small enclosures and compact enclosures
as a programming interface for controllers
in IT and industrial enclosures as mainte-
nance access for networks
in PC enclosures and console systems for the
temporary connection of additional equipment
in mobile Industrial Workstations for rapid
connection to existing network structures
in Command Panel systems for programming
and maintenance of integral components.
The mounting frame has a flap which snaps into
position in various stages at opening angles of
90 to 180. A snap fastener ensures a reliable
seal. This may be locked if required.
Material:
Mounting frame and metal flap:
Fine die-cast zinc
Plastic flap: Polycarbonate (semi-transparent)
Lock: Polycarbonate, RAL 7024
Surface finish:
Mounting frame and metal flap: Matt nickel-plated
Colour:
Lock: RAL 7024
IP 65 to IEC 60 529 with sealed flap and proper
assembly.
Description cUL UL Packs of Model No. SZ
Mounting frame
1)
Single, with plastic flap (semi-transparent) 1 2482.300
Double, with plastic flap (semi-transparent) 1 2482.310
Single, with metal flap 1 2482.320
Double, with metal flap 1 2482.330
Socket modules
Germany (VDE), spring-action terminals max. 2 x 2.5 mm
2
,
connection at rear
1 2482.400
3)

Germany (VDE), screw terminals max. 6 mm
2
, connection at rear, colour:
yellow (RAL 1016), for installation in front of main switch
1 2482.410
3)

Interface inserts
2 x SUB-D9 (jack/pin) 1 2482.500
SUB-D9 (jack/jack) 1 2482.510
2 x USB A (jack/jack) 1 2482.540
2)

RJ 45 (jack/jack, Cat. 5e), SUB-D9 (jack/jack), SUB-D9 (pin/pin) 1 2482.550
2 x RJ 45 (jack/jack, Cat. 5e) 1 2482.560
2)

USB A (jack/jack), RJ 45 (jack/jack, Cat. 5e), SUB-D9
(jack/pin)
1 2482.570
2)

Blanking plate (slimline), for individual population, usable area:
45 x 75 mm
1 2482.590
1)
Electrically conductive.
2)
Conductively linked to mounting frame.
3)
Rated voltage: 250 V AC, rated current: 10 16 A
All SUB-D interfaces may be rotated while in use.
Other socket modules and interface inserts available on request.
1
2
3
4
5
6
7
8
9
10
11
12
open
lock
open
lock
open
lock
A 9
1
117
Interface flap, single
Interface flap, double Mounting cut-out
Permissible material
thickness:
1 5 mm
Contact surface A
A
p
p
r
o
x
.

1
2
0
Approx. 65
A
p
p
r
o
x
.

1
1
6
Appr.
21
Approx. 38
A
p
p
r
o
x
.

1
2
0
Approx. 130
A
p
p
r
o
x
.

1
1
6
Approx. 61 Approx. 61
max. R2
A
p
p
r
o
x
.

1
6
A
p
p
r
o
x
.

1
2
Approx. 7 Approx. 7
A
p
p
r
o
x
.

1
2
A
9
1
52
A
p
p
r
o
x
.

1
6
A
p
p
r
o
x
.

1
2
max. R2
Approx. 7 Approx. 7
Appr. 35
Appr.
21
Mounting cut-out
Signal pillars
Signal pillars, LED compact
Benefits:
Complete, ready-to-connect solution
Minimal build height
Extremely long service life of the LEDs
(at least 70,000 h) therefore maintenance-free
Minimal assembly work and warehousing costs
Operating voltage: 24 V AC/DC
Electrical connection: Screw terminals
Light: LED
Transmission angle: 3 x 120
Operating temperature: 20 to +70C
Flashing function: Controllable via PLC
Cable entry: Metric screwed cable gland
M12 x 1.5 for cable diameter 3.0 6.5 mm
IP 65 to IEC 60 529
Also required:
For wall mounting:
Bracket for wall mounting, see page 622.
For conduit mounting/support arm systems:
Connection adaptor, see page 618.
Other mounting components,
see page 623/624.
Design Packs of
H
mm
Model No. SG
3-stage,
red, yellow, green
1 177 2372.100
1-stage, red 1 107 2372.130
GND L1 L2 L3
Connection picture SG 2372.100/.130/.140
GND 0 V (Ground)
L1 L3 +24 V DC (LED light stages, from bottom
to top, unneeded contacts are left free)
72
2
1
3
5
3
5
3
5
2
2
2
9
1
0
54
M4
1
7
7
1
72
2
1
3
5
2
2
2
9
1
0
54
M4
M12 x 1.5
1
0
7
54

2
0
4
.5
Seal 1
Mounting cut-out
Connection adaptors
for signal pillar, LED compact
For conduit mounting and mounting on support
arm systems.
Material:
Plastic
Colour:
Black
Accessories:
Mounting components for conduit mounting,
see page 624.
Mounting components for support arm system,
see page 623.
Packs of Model No. SG
1 2372.120

5
4
7
0
25
3
1
Signal pillars
Signal pillars, modular
Benefits:
Simple assembly and contact via bayonet fas-
tener.
Configuration of up to five components with
the same voltage.
Flashing and stroboscopic light element incl.
lamp, suitable for direct use.
Components are available in a range of colours
and voltages.
For modular configuration of
Connection components
AS interface element
Optical components
Incandescent lamps/LED lamps
Acoustic components
Label panel
for signal pillars, modular
Optionally for conduit or wall/base mounting.
Screw terminals in the connection component.
With cover for optical components. Contact
hazard protection to VDE.
Material:
Enclosure of polyamide
Colour:
Black
IP 54
Accessories:
Mounting components for wall/base mounting,
see page 622.
Mounting components for conduit mounting,
see page 624.
Mounting components for support arm system,
see page 623.
Connection component Model No. SG
For conduit mounting 2368.000
For wall/base mounting 2368.010

2
5
1
7
.7
1
3
2
53
0
68.5
70

4
.2

2
5
1
7
.7 4
.
2
1.75 18.75 21.5
1
3
70
68.5
2
53
0
1
for conduit mounting
SG 2368.000
for wall/base mounting
SG 2368.010
Seal 1
0
1
2
3
4
5
Connection diagram
Shared conductor
Stage 5
Stage 4
Stage 3
Stage 2
Stage 1
Signal pillars
1

2 3

4 5

6 7
Optical components
With 360 signal transmission thanks to optimised
prism system.
No. of potential stages =
5 components, with identical voltage.
Material:
Enclosure: Polyamide
Cap: Transparent polycarbonate
IP 54 if a cover or acoustic component is fitted at
the top.
Also required:
Incandescent lamps for steady light component,
see page 620.
70
6
5
.
5
5
6
A
Pre-configured seal A
Steady light component 12 240 V AC/DC
1)

LED steady light component 24 V AC/DC, 25 mA
LED steady light component 230 V AC/DC
LED flashing light component 24 V AC/DC
LED flashing light component 230 V AC/DC
Stroboscopic light component 24 V DC, 125 mA
Stroboscopic light component 230 V DC, 15 mA
Model No. SG
Red Green Yellow Clear Blue
2369.000 2369.010 2369.020 2369.030 2369.040
1)
Incandescent lamps not included with the supply.
Model No. SG
2372.000 2372.010 2372.020 2372.030 2372.040
Model No. SG
2370.150 2370.160 2370.170 2370.180 2370.190
Model No. SG
2370.500 2370.510 2370.520 2370.530 2370.540
Model No. SG
2370.550 2370.560 2370.570 2370.580 2370.590
Model No. SG
2371.000 2371.010 2371.020 2371.030 2371.040
Model No. SG
2371.050 2371.060 2371.070 2371.080 2371.090
1
2
3
4
5
6
7
Incandescent lamps
for steady light components
With BA 15d base/plinth.
Incandescent lamp Packs of Model No. SG
24 V, 5 W 3 2374.060
230 V, 5 W 3 2374.070
Signal pillars
User-friendly activation of the signal pillar levels
via AS interface.
Benefits:
Standard slave.
Max. 31 addresses.
Up to 4 signal levels may be activated.
Power supply may be switched from internal
bus supply to external auxiliary voltage.
With programming interface.
Wiring and commissioning work is significantly
reduced.
For mounting directly on the connection com-
ponent of the signal pillar.
Material:
Polycarbonate
Colour:
Black, transparent
IP 54 to IEC 60 529
Also required:
Connection element,
see page 619.
Design Packs of Model No. SM
24 V DC 1 2376.100
Voltage supply
AS interface element Via bus cable
Operating voltage 18.5 V DC to 31.6 V DC (to AS interface specification)
Polarity reversal protection Built-in
Watchdog Built-in
External auxiliary voltage 24 V DC +/ 10%
Auxiliary voltage internal external
Current carrying capacity max. 200 mA 200 mA per element
Current rating max. 250 mA 75 mA
Voltage on signal element 18 31 V DC 24 V DC +/ 10%
Short-circuit/overload protection Built-in Pre-fuse M 1.6 A
Temperature range 20C to +50C
70
6
5
.
5
5
6
A
Pre-configured seal A
3
4
5
0
1
2
Connection diagram
U external ()
ASI (+)
ASI ()
U external (+)
Acoustic components
To indicate warnings or malfunctions.
Material:
Enclosure: Polyamide
Colour:
Black
Note:
Mounting only on the upper end of the optical
components or directly on the connection com-
ponent.
24 V AC/DC
230 V AC
Acoustic components Packs of Model No. SG
85 dB
1)

max. 25 mA
1 2376.000
100 dB
2)

max. 25 mA
1 2376.010
1)
Continuous tone or pulsating
2)
Volume and 8 tones may be set
Acoustic components Packs of Model No. SG
85 dB
1)

max. 25 mA
1 2376.020
100 dB
2)

max. 25 mA
1 2376.030
1)
Continuous tone or pulsating
2)
Volume and 8 tones may be set
Signal pillars
Label panel
For text additions for up to 5 optical components,
with break point for any fields that are not required
(50 x 150 mm), including clamping section for
base or tube with a diameter of 25 mm.
Material:
Acrylic, transparent
Label panel Model No. SG
For 5 optical components 2374.150
1
2
3
Mounting components
for wall/base mounting
Also required:
1)
Connection component SG 2368.010,
see page 619.
Fig. Mounting component Colour
Suitable for signal pillar
Model No. SG
LED compact modular
Bracket for wall mounting,
including rubber gland for
concealed cable routing
Black 2372.110
Bracket for connection component Black
1)
2374.040
For side cable outlet Black
1)
2374.080
1
2
3
70

1
0
.
5

5
7

5
.
5
A
54
1
5
M16 x 1.5
1
.
5
B
70

5
4

4
2
5.5

4
.
2
15
Seal
Flat seal
A
B
Bracket for
connection component
For
side cable outlet
73
4
0
110
50
76
2
5
1
0
27
4
10
Bracket for
wall mounting
Signal pillars
4
5
6
7
Mounting components
for support arm systems
Also required:
1)
Connection adaptor SG 2372.120,
see page 618.
2)
see page 619.
Model No. SG
LED compact modular
For support arm system CP-L
Angle piece CP 6524.0X0
Angle coupling CP 6526.0X0
RAL 9017
(traffic black)

1)

2)
2375.000
For support arm system CP-L
Intermediate hinge CP 6523.0X0
Wall-mounted hinge CP 6521.0X0
Top-mounted joint CP 6522.0X0
RAL 9017
(traffic black)

1)

2)
2375.020
For support arm system CP-S
Angle piece 90 CP 6501.140
RAL 7024
(graphite grey)

1)

2)
2375.030
For support arm system CP-C
Angle coupling 90 CP 6071.200
Angle piece 90 CP 6071.400
Intermediate hinge CP 6071.800
Wall-mounted hinge CP 6072.500
Top-mounted joint CP 6072.600
RAL 7024
(graphite grey)

1)

2)
6073.000
4
5
6
7
Signal pillars
8
9
10
11
12
Mounting components
for conduit mounting
Also required:
1)
Connection adaptor SG 2372.120,
see page 618.
2)
see page 619.
Model No. SG
LED compact modular
Base with integral conduit, 25 mm,
110 mm long
Black
1)

2)
2374.000
Individual base Black 2374.010
Single conduit, 250 mm long Aluminium
1)

2)
2374.020
Single conduit, 400 mm long Aluminium
1)

2)
2374.030
Angle bracket for conduit mounting Black 2374.050
Base, tiltable from 0 90
in 7.5 increments. Simple cable entry
up to a cable diameter of 14 mm.
Black
1)

2)
2374.090
3)

3)
8
9
10
11
12
10.5
1
1
0
25
5.5
A
54
70
2
5
0

(
4
0
0
)
25
Seal A
Base with integral conduit Single conduit
10.5
70
5.5
21.7
3
7
1
7
A
6.2
19
1
8
5
7
3
8
9
12
5
2
.
5
70
36
Individual base, plastic
Angle bracket for conduit mounting
Seal A
87.5
54
70
7
1
1
1
7
25
70
77
Base, tiltable
625 Rittal Catalogue 33
List of model numbers
1001.600 to 2102.180
Model No. Page
1001.600 162
1002.500 162
1002.600 162
1003.600 162
1004.600 162
1005.500 163
1005.600 163
1006.500 163
1006.600 163
1007.600 163
1008.600 163
1009.600 163
1010.500 163
1010.600 163
1011.600 162
1012.600 163
1013.600 163
1014.600 164
1015.600 163
1016.600 164
1017.600 164
1018.600 164
1019.500 164
1019.600 164
1030.500 44
1031.500 44
1032.500 44
1033.500 44
1034.500 44
1035.500 44
1038.500 45
1039.500 45
1045.500 45
1050.500 45
1054.500 45
1055.500 46
1057.500 45
1058.500 45
1060.500 45
1073.500 46
1076.500 45
1077.500 46
1090.500 45
1100.500 46
1101.110 165
1101.120 165
1101.130 165
1101.140 165
1101.800 429
1101.910 406
1101.920 406
1101.930 406
1101.940 406
1110.500 46
1114.500 46
1130.500 46
1158.500 517
1180.500 46
1199.100 400
1213.500 46
1228.010 368
1228.110 368
1228.310 368
1260.500 46
1280.500 46
1302.600 155
1306.600 155
1307.600 155
1308.600 155
1310.600 155
1316.600 155
1317.600 155
1320.600 155
1338.500 45
1339.500 45
1350.500 45
1360.500 45
1376.500 45
1380.500 44
1400.500 51
1423.500 50
1432.500 50
1434.500 50
1444.500 50
1446.500 50
1448.500 50
1449.500 50
1453.500 50
1454.500 51
1466.500 51
1467.500 51
1468.500 51
1469.500 51
1479.500 51
1480.500 51
1481.000 446
1482.000 478
1483.010 440
1484.000 420
1484.001 420
1485.000 421
1486.000 421
1487.000 421
1488.000 421
1489.000 421
1490.010 419
1491.000 446
1492.000 421
1500.510 35
1501.510 35
1502.510 35
1503.510 35
1504.510 35
1505.510 36
1507.510 35
1508.510 35
1509.510 36
1511.510 35
1514.510 34
1515.510 34
1516.510 34
1517.510 34
1518.510 34
1521.010 161
1522.010 161
1523.010 161
1524.010 161
1525.010 161
Model No. Page
1526.010 161
1527.010 161
1528.010 161
1528.510 34
1529.010 161
1529.510 35
1530.010 161
1530.510 35
1531.510 35
1532.510 35
1533.510 36
1535.510 35
1536.510 35
1537.510 36
1539.510 35
1548.500 37
1549.500 37
1550.500 37
1553.500 37
1554.500 37
1555.500 37
1556.500 37
1557.500 37
1558.010 161
1558.510 40
1559.010 161
1559.510 40
1560.700 443
1561.700 443
1562.700 443
1563.700 443
1564.700 443
1565.700 443
1567.700 443
1568.700 443
1569.700 443
1571.700 443
1575.700 443
1576.700 443
1577.450 40
1577.500 38
1577.520 40
1577.530 40
1577.550 40
1577.560 40
1578.450 41
1578.500 38
1578.520 41
1578.530 41
1578.550 41
1578.560 41
1579.450 41
1579.500 38
1579.520 41
1579.530 41
1579.550 41
1579.560 41
1580.000 439
1581.000 514
1581.100 516
1582.000 514
1583.010 161
1583.520 39
1584.010 161
Model No. Page
1584.520 39
1585.010 161
1585.520 39
1586.520 39
1589.510 35
1590.000 439
1591.000 425
1592.000 425
1592.010 425
1594.000 439
1605.520 40
1606.520 40
1609.510 41
1611.510 41
1670.600 154
1671.600 154
1672.600 154
1674.600 154
1675.600 154
1676.600 154
1782.135 205
1919.500 64
1920.500 64
1926.500 64
1931.200 564
1932.200 564
1933.200 564
1934.200 564
1935.200 564
1936.200 564
1937.200 564
1939.200 564
1940.000 564
1941.000 564
1945.000 564
1950.000 564
1962.200 548
1963.200 548
1978.200 546
1979.200 548
1980.200 548
1985.500 545
1986.500 546
1994.835 545
1995.235 546
1995.835 546
1996.535 545
1996.835 545
1997.235 546
1997.835 546
2004.235 544
2008.235 544
2011.235 544
2026.200 547
2027.200 547
2034.200 547
2092.200 567
2092.300 567
2092.500 567
2094.200 567
2094.300 567
2094.400 568
2094.500 567
2102.180 223
Model No. Page
2102.190 to 2412.210
2102.190 223
2102.320 223
2102.400 223
2102.410 223
2102.490 223
2203.400 530
2231.000 564
2232.000 564
2233.000 564
2235.135 518
2237.000 467
2238.000 467
2239.000 467
2243.605 62
2246.605 62
2249.605 62
2252.605 62
2253.605 63
2255.605 62
2256.605 63
2258.605 62
2259.605 63
2261.605 62
2262.605 63
2265.605 63
2268.605 63
2271.605 63
2304.000 421
2304.010 156
2305.000 409
2307.000 421
2308.000 424
2309.000 467
2310.038 427
2310.076 427
2310.100 427
2310.120 427
2311.225 426
2311.250 426
2313.150 467
2313.750 467
2314.000 467
2315.000 467
2316.000 467
2317.000 467
2318.000 467
2319.000 467
2322.700 545
2323.235 546
2324.235 546
2325.000 426
2326.000 426
2327.000 426
2328.000 426
2331.700 545
2332.235 546
2334.000 501
2335.000 501
2336.700 545
2337.235 546
2338.235 546
2340.700 545
2341.235 546
2342.235 546
Model No. Page
2343.000 501
2345.700 545
2346.235 546
2347.235 546
2350.000 527
2351.000 527
2352.000 527
2353.000 527
2354.000 527
2355.000 527
2356.000 527
2357.000 527
2358.000 527
2359.000 527
2360.000 527
2361.000 431
2362.000 431
2363.000 431
2364.000 503
2365.000 476
2366.000 476
2367.040 500
2367.060 500
2367.080 500
2367.120 500
2367.160 500
2367.200 500
2368.000 619
2368.010 619
2369.000 620
2369.010 620
2369.020 620
2369.030 620
2369.040 620
2370.150 620
2370.160 620
2370.170 620
2370.180 620
2370.190 620
2370.500 620
2370.510 620
2370.520 620
2370.530 620
2370.540 620
2370.550 620
2370.560 620
2370.570 620
2370.580 620
2370.590 620
2371.000 620
2371.010 620
2371.020 620
2371.030 620
2371.040 620
2371.050 620
2371.060 620
2371.070 620
2371.080 620
2371.090 620
2372.000 620
2372.010 620
2372.020 620
2372.030 620
2372.040 620
Model No. Page
2372.100 618
2372.110 622
2372.120 618
2372.130 618
2373.000 476
2373.210 459
2373.250 459
2373.300 459
2373.350 459
2374.000 624
2374.010 624
2374.020 624
2374.030 624
2374.040 622
2374.050 624
2374.060 620
2374.070 620
2374.080 622
2374.090 624
2374.150 622
2375.000 623
2375.020 623
2375.030 623
2376.000 621
2376.010 621
2376.020 621
2376.030 621
2376.100 621
2377.030 543
2377.060 543
2377.090 543
2377.120 543
2377.150 543
2377.180 543
2377.460 543
2377.860 543
2377.880 543
2379.600 609
2379.800 609
2379.900 610
2381.000 614
2382.000 615
2383.000 610
2383.010 603
2383.020 615
2383.030 607
2383.040 607
2384.010 160
2384.020 160
2384.030 160
2384.040 160
2388.000 498
2388.100 498
2388.120 498
2388.150 498
2388.200 498
2388.280 498
2388.600 498
2388.800 498
2389.000 601
2400.000 522
2400.300 524
2400.500 524
2400.900 523
Model No. Page
2400.910 523
2400.920 523
2400.930 523
2400.940 523
2400.950 523
2400.960 523
2400.970 523
2401.000 392
2402.000 392
2403.000 409
2404.000 409
2410.000 521
2410.010 521
2410.020 521
2410.030 521
2410.110 521
2410.120 521
2410.130 521
2410.200 521
2410.210 521
2410.220 521
2410.230 521
2410.290 521
2411.090 499
2411.110 499
2411.140 499
2411.160 499
2411.210 499
2411.290 499
2411.504 520
2411.505 520
2411.506 520
2411.507 520
2411.532 520
2411.550 520
2411.551 520
2411.552 520
2411.553 520
2411.554 520
2411.555 520
2411.556 520
2411.557 520
2411.558 520
2411.559 520
2411.560 520
2411.561 520
2411.562 520
2411.600 519
2411.610 519
2411.620 519
2411.630 519
2411.640 519
2411.650 519
2411.660 519
2411.670 519
2411.800 519
2411.810 519
2411.820 519
2411.830 519
2411.840 519
2411.850 519
2411.860 519
2411.870 519
2412.210 501
Model No. Page
2412.216 to 2786.000
2412.216 501
2412.225 501
2412.310 501
2412.316 501
2412.325 501
2413.375 499
2413.550 499
2414.000 500
2414.500 500
2415.000 500
2415.100 430
2415.500 447
2416.000 423
2418.000 423
2419.000 423
2420.000 421
2422.000 438
2423.000 438
2424.100 432
2425.100 432
2426.100 432
2426.500 432
2427.100 432
2430.000 421
2432.000 425
2433.000 439
2433.500 439
2435.000 419
2436.732 388
2436.735 388
2437.000 388
2438.735 388
2439.000 420
2440.735 388
2446.000 427
2449.000 425
2450.000 419
2450.010 419
2451.000 419
2452.000 419
2453.000 419
2454.000 419
2455.000 419
2455.010 419
2456.500 419
2459.000 384
2459.500 384
2460.000 421
2460.650 421
2461.000 421
2462.000 421
2463.000 421
2464.000 421
2465.000 421
2466.000 421
2467.000 416
2468.000 416
2469.000 416
2470.000 431
2471.000 431
2472.000 431
2473.000 431
2474.000 431
2475.000 431
Model No. Page
2476.000 423
2477.000 392
2478.000 392
2479.000 392
2480.000 392
2481.000 392
2482.000 616
2482.210 616
2482.220 616
2482.230 616
2482.300 617
2482.310 617
2482.320 617
2482.330 617
2482.400 617
2482.410 617
2482.500 617
2482.510 617
2482.540 617
2482.550 617
2482.560 617
2482.570 617
2482.590 617
2482.700 616
2482.710 616
2482.720 616
2482.730 616
2483.000 421
2484.000 421
2485.000 420
2485.100 420
2486.300 478
2486.500 478
2487.000 478
2488.000 478
2489.000 478
2489.500 478
2493.000 422
2493.500 423
2501.500 431
2502.500 431
2503.010 439
2504.000 478
2504.500 478
2504.800 478
2505.510 440
2506.100 508
2507.100 496
2507.200 496
2507.300 496
2507.400 496
2507.500 496
2508.010 439
2508.100 439
2509.000 438
2509.500 438
2510.000 428
2511.500 431
2512.000 428
2513.000 428
2514.000 428
2514.500 428
2514.600 428
2514.800 428
Model No. Page
2515.000 428
2518.000 429
2519.000 429
2519.200 429
2520.000 421
2521.000 424
2522.000 421
2523.000 421
2525.000 422
2526.000 421
2527.000 421
2528.000 421
2530.000 421
2531.000 424
2532.000 424
2533.000 420
2534.100 422
2534.500 422
2535.000 420
2536.000 420
2537.000 418
2537.010 418
2540.500 421
2541.235 298
2542.235 298
2543.235 298
2545.000 424
2546.000 424
2547.000 424
2548.000 424
2549.000 424
2549.500 424
2549.510 156
2549.600 156
2559.000 501
2560.010 514
2560.400 517
2561.010 514
2561.100 516
2561.400 517
2561.500 515
2562.010 514
2562.100 516
2562.400 517
2562.500 515
2563.010 514
2563.100 516
2563.150 517
2563.500 515
2564.000 501
2565.000 501
2565.100 501
2565.110 501
2565.120 501
2566.000 501
2567.000 501
2568.000 501
2569.000 501
2570.000 501
2570.100 503
2570.200 501
2570.500 502
2571.000 422
2572.000 420
Model No. Page
2573.000 513
2574.000 476
2575.000 420
2576.000 420
2581.000 388
2583.010 440
2584.000 441
2589.000 529
2590.000 529
2591.000 529
2592.000 529
2593.000 529
2594.000 529
2595.000 529
2596.000 529
2597.000 530
2599.000 420
2682.000 601
2683.600 170
2684.600 170
2685.600 170
2686.600 170
2694.500 107
2695.500 107
2696.500 107
2730.000 408
2731.000 408
2732.000 408
2733.000 408
2734.000 408
2735.250 407
2735.500 407
2735.510 407
2735.520 407
2735.530 407
2735.540 407
2735.560 407
2735.570 407
2735.580 407
2735.590 407
2736.500 407
2736.510 407
2736.520 407
2736.530 407
2736.540 407
2740.000 410
2741.000 410
2742.000 410
2743.000 410
2744.000 410
2745.000 410
2746.000 410
2749.000 410
2760.000 408
2761.000 408
2762.000 408
2763.000 408
2772.000 408
2780.000 408
2781.000 408
2782.000 408
2784.000 408
2785.000 408
2786.000 408
Model No. Page
2787.000 to 3244.140
2787.000 408
2788.000 408
2789.000 408
2791.000 410
2792.000 410
2793.560 409
2796.000 408
2801.200 369
2802.200 369
2804.200 369
2805.200 369
2807.200 369
2808.200 369
2816.200 369
2817.000 364
2818.200 369
2819.000 364
2819.200 364
2823.200 369
2824.200 369
2826.200 369
2828.200 369
2829.200 369
2830.200 369
2836.200 369
2837.200 369
2839.200 369
2840.200 369
2843.160 499
2843.200 499
2843.250 499
2843.320 499
2843.400 499
2843.500 499
2843.630 499
2855.000 370
2856.000 370
2859.000 374
2860.000 370
2865.000 370
2866.000 370
2867.000 370
2868.000 370
2869.000 370
2870.000 370
2875.000 370
2876.000 370
2878.000 370
2879.000 370
2880.000 370
2885.000 370
2886.000 370
2887.000 370
2889.000 371
2890.000 371
2891.000 364
2892.000 364
2899.200 524
2899.250 524
2899.320 524
2899.400 524
2903.200 369
2904.200 369
2905.200 369
Model No. Page
2906.200 369
2907.000 367
2908.000 367
2909.200 369
2910.200 369
2913.000 367
3020.500 341
3105.310 289
3105.320 289
3105.330 289
3105.340 289
3105.350 289
3105.360 289
3105.370 289
3105.380 289
3105.390 289
3105.400 289
3105.410 289
3105.420 289
3105.430 289
3108.024 221
3108.100 221
3108.115 221
3110.000 294
3110.200 294
3114.200 293
3118.000 294
3120.200 295
3121.000 341
3124.100 295
3124.200 295
3125.800 226
3126.100 227
3126.115 227
3126.230 325
3126.240 325
3126.270 326
3126.410 228
3126.424 228
3127.100 227
3127.115 227
3128.100 227
3128.115 227
3128.410 228
3128.424 228
3129.100 227
3129.115 227
3129.410 228
3129.424 228
3129.800 226
3130.100 227
3130.115 227
3130.410 228
3130.424 228
3144.000 218
3145.000 218
3148.007 220
3149.007 220
3149.410 219
3149.420 219
3149.440 219
3149.810 219
3149.820 219
3149.840 219
Model No. Page
3159.100 347
3164.115 220
3164.230 220
3164.610 220
3164.620 220
3165.024 225
3165.048 225
3165.115 225
3165.230 225
3165.615 225
3165.624 225
3165.630 225
3165.648 225
3165.815 225
3165.824 225
3165.830 225
3165.848 225
3169.007 220
3171.100 301
3172.100 301
3173.100 301
3174.000 301
3175.000 304
3176.000 304
3177.000 299
3181.100 302
3182.100 302
3183.100 302
3201.040 302
3201.050 301
3201.070 295
3201.200 232
3201.300 232
3201.900 304
3201.910 304
3209.100 252
3209.104 253
3209.500 252
3209.504 253
3210.100 253
3210.104 254
3210.140 253
3210.500 253
3210.504 254
3210.540 253
3212.024 255
3212.115 255
3212.230 255
3213.310 293
3213.320 293
3213.330 293
3214.100 255
3215.100 255
3216.480 258
3232.700 272
3232.710 272
3232.720 272
3232.730 272
3232.740 272
3232.750 272
3232.760 272
3232.770 272
3232.780 272
3232.790 272
Model No. Page
3232.800 273
3232.810 273
3232.820 273
3232.830 273
3232.840 273
3232.850 273
3232.860 273
3232.870 273
3232.880 273
3232.890 273
3235.440 294
3236.124 222
3237.020 303
3237.060 303
3237.066 301
3237.080 303
3237.100 212
3237.110 212
3237.124 212
3237.200 303
3237.600 212
3238.020 303
3238.055 302
3238.060 303
3238.066 301
3238.080 303
3238.100 212
3238.110 212
3238.124 212
3238.200 303
3238.600 212
3239.020 303
3239.060 303
3239.066 301
3239.080 303
3239.100 213
3239.110 213
3239.124 213
3239.200 303
3239.600 213
3240.020 303
3240.060 303
3240.066 301
3240.080 303
3240.100 214
3240.110 214
3240.124 214
3240.200 303
3240.600 214
3241.100 214
3241.110 214
3241.124 214
3241.600 214
3243.020 303
3243.060 303
3243.066 301
3243.080 303
3243.100 215
3243.110 215
3243.200 303
3243.600 215
3244.100 215
3244.110 215
3244.140 215
Model No. Page
3244.600 to 3351.024
3244.600 215
3245.080 303
3245.500 216
3245.510 216
3245.600 216
3248.000 229
3253.000 299
3253.010 299
3253.200 300
3253.220 300
3254.000 299
3254.200 300
3267.100 299
3267.200 300
3273.500 246
3273.515 246
3284.200 300
3284.210 300
3285.000 299
3285.200 300
3286.000 299
3286.100 299
3286.110 299
3286.120 300
3286.200 300
3286.210 300
3286.230 300
3286.240 300
3286.250 300
3286.260 297
3286.270 297
3286.280 297
3286.300 299
3286.310 300
3286.400 299
3286.410 300
3286.500 299
3286.510 300
3286.520 300
3286.530 300
3286.540 300
3286.550 300
3286.600 299
3286.610 300
3286.700 297
3286.780 292
3286.800 297
3286.850 292
3286.860 292
3286.870 291
3286.880 292
3286.900 297
3286.970 291
3286.980 292
3286.990 291
3288.200 300
3289.200 300
3294.100 299
3294.200 300
3300.040 249
3300.050 249
3300.060 249
3300.070 249
3300.080 249
Model No. Page
3300.090 249
3300.110 249
3300.120 249
3300.160 278
3300.170 278
3300.180 278
3300.260 305
3300.261 305
3300.262 305
3300.263 305
3300.270 278
3300.280 278
3300.290 305
3300.291 305
3300.292 305
3300.293 305
3300.294 305
3300.295 305
3300.296 305
3300.297 305
3300.310 274
3300.320 274
3300.330 274
3300.340 274
3300.353 276
3300.354 276
3300.355 276
3300.356 276
3300.360 276
3300.370 276
3300.510 276
3300.560 276
3300.710 276
3300.760 276
3301.221 283
3301.320 283
3301.370 283
3301.380 283
3301.390 283
3301.421 283
3301.560 302
3301.570 302
3301.580 302
3301.590 302
3301.600 302
3301.606 303
3301.608 303
3301.610 303
3301.612 303
3301.620 274
3301.660 274
3301.800 246
3301.830 274
3301.870 274
3301.900 304
3301.910 304
3301.920 304
3301.930 304
3301.940 304
3301.950 305
3301.955 305
3301.957 305
3301.960 305
3301.965 305
Model No. Page
3301.967 305
3302.100 234
3302.110 234
3302.200 234
3302.210 234
3302.300 233
3302.310 233
3303.500 235
3303.504 242
3303.510 235
3303.514 242
3303.530 243
3303.600 235
3303.610 235
3304.500 237
3304.504 242
3304.510 237
3304.514 242
3304.530 243
3304.540 237
3304.544 242
3304.560 243
3304.600 237
3304.610 237
3304.640 237
3305.500 238
3305.504 242
3305.510 238
3305.514 242
3305.530 243
3305.540 238
3305.544 242
3305.560 243
3305.600 238
3305.610 238
3305.640 238
3307.700 248
3307.710 248
3307.740 248
3310.700 248
3310.710 248
3310.740 248
3311.010 279
3311.020 280
3311.030 283
3311.040 283
3311.050 283
3311.060 283
3311.110 279
3311.130 279
3311.210 280
3311.230 279
3311.260 279
3311.310 283
3311.400 281
3311.530 280
3311.560 280
3311.600 282
3318.600 264
3318.610 264
3319.600 264
3319.610 264
3320.600 265
3321.700 301
Model No. Page
3322.700 301
3327.700 301
3328.500 239
3328.504 243
3328.510 239
3328.514 243
3328.540 239
3328.544 243
3328.600 239
3328.610 239
3328.640 239
3329.500 240
3329.504 243
3329.510 240
3329.514 243
3329.540 240
3329.544 243
3329.600 240
3329.610 240
3329.640 240
3329.903 301
3329.904 301
3332.540 240
3332.640 240
3334.600 265
3334.660 265
3335.590 267
3335.600 267
3335.610 267
3335.620 267
3335.630 267
3335.640 267
3335.650 267
3335.660 267
3336.100 268
3336.200 268
3336.300 268
3336.500 268
3336.600 268
3336.650 268
3336.700 269
3336.710 269
3336.720 269
3336.730 269
3336.740 269
3336.750 269
3339.100 269
3339.200 269
3339.250 269
3339.280 269
3340.024 217
3340.115 217
3340.230 217
3341.024 217
3341.115 217
3341.230 217
3342.024 217
3342.115 217
3342.230 217
3342.500 217
3350.024 218
3350.115 218
3350.230 218
3351.024 218
Model No. Page
3351.115 to 4597.000
3351.115 218
3351.230 218
3352.024 218
3352.115 218
3352.230 218
3352.500 218
3355.100 218
3356.100 218
3357.100 218
3359.500 245
3359.510 245
3359.540 245
3359.600 245
3359.610 245
3359.640 245
3360.100 266
3360.250 266
3360.470 266
3361.500 236
3361.510 236
3361.540 236
3361.600 236
3361.610 236
3361.640 236
3363.100 256
3363.104 259
3363.500 256
3363.504 259
3364.100 256
3364.104 259
3364.500 256
3364.504 259
3366.500 241
3366.510 241
3366.540 241
3366.600 241
3366.610 241
3366.640 241
3373.100 257
3373.104 260
3373.500 257
3373.504 260
3374.100 257
3374.104 260
3374.500 257
3374.504 260
3375.100 258
3375.104 261
3375.500 258
3375.504 261
3377.000 297
3382.500 244
3382.510 244
3382.600 244
3382.610 244
3383.500 245
3383.510 245
3383.540 245
3383.600 245
3383.610 245
3383.640 245
3384.500 246
3384.510 246
3384.540 246
Model No. Page
3384.600 246
3384.610 246
3384.640 246
3385.500 247
3385.510 247
3385.540 247
3385.600 247
3385.610 247
3385.640 247
3386.540 247
3386.640 247
3387.540 247
3387.640 247
3636.010 490
3659.440 611
3659.520 611
3659.620 611
3659.680 611
3861.580 485
4000.100 156
4000.200 156
4000.210 156
4114.000 429
4115.000 429
4115.500 429
4116.000 429
4116.500 429
4118.000 429
4118.500 429
4119.000 477
4120.000 427
4123.000 429
4124.000 429
4127.010 496
4127.210 496
4131.700 449
4132.700 449
4133.000 474
4134.000 474
4137.700 449
4138.140 492
4138.150 492
4138.180 492
4138.190 492
4138.240 492
4138.250 492
4138.280 492
4138.290 492
4138.300 492
4138.350 492
4138.400 492
4138.450 492
4139.140 492
4139.150 492
4139.180 492
4139.190 492
4139.300 492
4139.350 492
4140.000 493
4140.010 493
4140.020 493
4140.110 493
4140.120 493
4140.210 493
Model No. Page
4140.220 493
4140.810 494
4140.820 494
4140.830 494
4140.840 494
4155.000 492
4155.100 492
4155.500 492
4156.000 425
4157.000 477
4162.000 477
4163.000 477
4164.000 477
4165.000 477
4166.000 477
4169.000 463
4170.000 463
4171.000 463
4172.000 463
4173.000 463
4174.000 463
4175.000 463
4176.000 463
4177.000 463
4178.000 463
4179.000 477
4180.000 477
4181.000 473
4182.000 472
4183.000 473
4189.000 425
4190.000 425
4191.000 527
4192.000 527
4193.000 527
4196.000 527
4198.000 438
4199.000 474
4309.000 462
4311.000 512
4315.100 496
4315.150 496
4315.200 496
4315.320 496
4315.350 496
4315.400 496
4315.450 496
4315.520 496
4315.550 496
4315.600 496
4315.710 496
4315.720 496
4315.800 495
4315.810 495
4315.820 495
4315.830 495
4315.840 495
4315.850 495
4315.860 495
4316.000 512
4317.000 512
4318.000 512
4319.090 530
4319.120 530
Model No. Page
4319.160 530
4319.200 530
4320.700 511
4321.700 511
4323.700 511
4333.120 447
4333.160 447
4333.180 447
4336.000 527
4338.000 527
4339.000 527
4347.000 466
4348.000 500
4361.000 466
4362.000 466
4363.000 466
4364.000 464
4365.000 464
4367.000 464
4369.000 464
4370.000 464
4371.000 464
4372.000 464
4373.000 464
4374.000 464
4375.000 464
4376.000 464
4377.000 464
4378.000 464
4379.000 464
4380.000 464
4381.000 464
4382.000 464
4393.000 463
4394.000 466
4395.000 466
4396.000 466
4396.500 466
4398.000 466
4398.500 466
4530.000 561
4531.000 561
4532.000 470
4538.000 430
4540.000 398
4541.000 563
4542.000 563
4547.000 552
4568.000 438
4570.000 370
4576.000 445
4579.000 462
4582.000 398
4582.500 398
4583.000 429
4583.500 429
4590.700 443
4591.700 443
4592.700 443
4593.000 445
4594.000 462
4595.000 440
4596.000 462
4597.000 470
Model No. Page
4598.000 to 6510.340
4598.000 462
4599.000 462
4611.000 374
4612.000 373
4638.600 427
4638.800 427
4650.000 171
4694.000 462
4695.000 462
4696.000 462
4697.000 462
4757.500 107
4911.000 393
4911.100 393
4912.000 393
4916.000 393
4918.000 393
4920.000 393
4933.000 467
4934.000 467
4935.000 467
4937.000 467
4943.000 465
4944.000 465
4945.000 465
4946.000 465
4947.000 465
5001.000 425
5001.050 459
5001.051 459
5001.052 459
5001.053 459
5001.054 459
5001.060 416
5001.061 416
5001.062 416
5001.070 446
5001.075 447
5001.080 527
5001.081 527
5001.082 527
5001.083 527
5001.130 381
5001.140 381
5001.150 381
5001.160 381
5001.210 378
5001.211 378
5001.212 378
5001.213 378
5001.214 378
5001.215 378
5001.216 378
5001.217 378
5001.218 378
5001.219 378
5001.220 378
5001.221 378
5001.222 379
5001.223 379
5001.224 379
5001.225 379
5001.226 511
5001.227 511
Model No. Page
5001.228 511
5001.229 378
5001.233 378
5001.234 378
5001.235 378
5001.236 379
5001.237 511
5001.310 431
5001.330 431
5001.350 431
5001.360 431
5001.370 461
5001.371 461
5110.500 48
5111.500 48
5112.500 48
5113.500 48
5114.500 48
5115.500 48
5116.500 48
5117.500 48
5118.500 49
5119.500 49
5120.500 49
5121.500 49
5122.500 49
5123.500 49
6002.000 612
6002.100 608
6003.000 613
6005.500 442
6013.000 603
6013.100 603
6016.200 441
6016.600 145
6016.700 145
6023.010 141
6027.000 604
6027.010 604
6028.000 604
6028.010 604
6028.014 604
6028.015 604
6028.016 604
6028.500 604
6028.510 604
6028.530 604
6028.540 604
6040.010 141
6050.000 141
6050.500 141
6052.000 528
6052.500 524
6053.000 605
6053.210 605
6053.300 605
6053.500 605
6053.800 605
6058.000 605
6058.500 605
6058.800 605
6059.000 531
6059.500 531
6070.000 137
Model No. Page
6070.200 137
6071.000 142
6071.200 137
6071.400 137
6071.600 143
6071.800 137
6072.000 137
6072.200 137
6072.400 137
6072.500 137
6072.600 137
6072.800 137
6073.000 623
6074.000 137
6074.100 137
6074.300 137
6074.500 137
6075.100 137
6075.300 137
6075.500 137
6100.000 141
6100.500 141
6107.000 602
6107.100 602
6107.200 602
6108.000 478
6110.010 141
6110.100 141
6120.010 141
6130.010 141
6130.510 141
6130.610 141
6135.000 148
6136.000 148
6136.500 148
6137.035 147
6137.535 147
6140.010 141
6141.100 148
6141.200 148
6143.200 147
6143.210 151
6143.310 151
6144.100 151
6146.100 147
6146.200 147
6146.300 147
6146.400 147
6147.000 151
6148.000 374
6160.010 141
6170.010 141
6180.010 141
6190.000 601
6200.000 141
6200.500 141
6205.000 143
6205.100 470
6214.000 150
6214.500 149
6215.000 149
6220.000 150
6340.000 120
6340.100 120
Model No. Page
6340.300 120
6340.400 120
6341.000 442
6372.541 116
6372.542 116
6372.543 116
6372.551 116
6372.552 116
6372.553 116
6372.561 116
6372.562 116
6372.563 116
6375.000 600
6375.010 600
6375.020 600
6375.029 600
6375.040 600
6375.050 600
6375.060 600
6380.000 118
6380.020 118
6380.040 118
6380.050 118
6380.400 118
6380.410 118
6380.500 118
6380.510 118
6380.600 118
6380.610 118
6385.000 600
6385.010 600
6385.040 600
6385.050 600
6385.060 600
6442.500 123
6446.020 609
6450.010 606
6450.020 606
6450.050 606
6450.060 606
6450.070 606
6450.170 606
6462.500 123
6501.000 129
6501.020 129
6501.050 129
6501.070 129
6501.090 146
6501.110 129
6501.120 129
6501.130 129
6501.140 129
6501.150 129
6501.160 129
6503.000 151
6505.100 604
6505.200 604
6505.500 604
6508.010 133
6508.020 142
6509.000 133
6510.210 144
6510.330 144
6510.340 144
Model No. Page
6511.000 to 7072.220
6511.000 133
6513.000 133
6513.050 133
6514.200 610
6515.000 133
6519.000 145
6520.010 133
6520.510 133
6521.010 133
6522.010 133
6523.010 133
6524.010 133
6524.210 133
6525.010 133
6525.110 133
6525.210 133
6525.510 133
6525.610 133
6526.010 133
6527.010 133
6527.110 133
6528.010 142
6528.110 146
6528.210 143
6528.410 144
6528.450 142
6528.510 142
6529.010 133
6530.200 122
6531.200 122
6532.200 122
6533.200 122
6534.000 121
6535.000 121
6535.010 167
6536.000 121
6536.010 167
6537.000 121
6538.000 121
6538.010 167
6539.010 167
6540.200 122
6544.000 121
6552.500 123
6660.010 169
6660.050 169
6662.500 123
6663.000 169
6663.400 169
6663.500 169
6664.000 169
6664.100 169
6664.300 169
6664.500 169
6665.000 169
6665.500 169
6680.000 166
6681.000 166
6700.500 101
6701.500 102
6702.500 103
6703.500 104
6704.500 101
6705.500 102
Model No. Page
6706.500 103
6707.500 104
6710.500 101
6711.500 102
6712.500 103
6713.500 104
6714.500 101
6715.500 102
6716.500 103
6717.500 104
6720.100 101
6720.200 101
6720.500 101
6721.100 102
6721.200 102
6721.500 102
6722.100 103
6722.200 103
6722.500 103
6723.100 104
6723.200 104
6723.500 104
6730.030 105
6730.100 105
6730.110 105
6730.120 105
6730.130 105
6730.310 450
6730.330 450
6730.340 450
6730.400 105
6730.410 105
6730.600 298
6740.500 106
6742.500 106
6746.500 106
6748.500 106
6900.000 111
6900.100 111
6900.300 109
6900.400 111
6900.410 111
6901.100 111
6902.100 111
6902.300 111
6902.310 148
6902.400 111
6902.500 111
6902.640 143
6902.670 145
6902.700 481
6902.770 522
6902.920 371
6902.950 616
6902.960 480
6902.980 480
6903.200 615
7000.390 86
7000.410 86
7000.430 86
7000.440 86
7000.450 87
7000.460 87
7000.500 86
Model No. Page
7000.510 86
7000.520 87
7000.530 87
7000.532 87
7000.560 86
7000.570 86
7000.580 87
7000.590 87
7000.592 87
7000.620 483
7000.625 486
7000.630 506
7000.640 400
7000.652 388
7000.653 388
7000.663 388
7000.670 224
7000.672 375
7000.675 503
7000.676 460
7000.678 460
7000.680 224
7000.684 204
7000.685 536
7000.840 85
7000.850 85
7000.852 85
7000.875 95
7000.882 95
7000.885 95
7000.892 95
7000.895 95
7000.940 88
7000.944 88
7000.990 568
7016.100 542
7016.110 542
7016.120 542
7016.130 542
7016.140 532
7016.150 532
7030.000 582
7030.010 582
7030.030 580
7030.040 581
7030.050 581
7030.060 584
7030.070 585
7030.071 585
7030.080 584
7030.090 584
7030.091 584
7030.092 584
7030.093 584
7030.094 584
7030.095 584
7030.100 583
7030.110 583
7030.111 583
7030.120 583
7030.130 583
7030.140 583
7030.150 583
7030.190 583
Model No. Page
7030.200 583
7030.220 583
7030.230 583
7031.100 575
7040.010 191
7040.020 191
7040.030 191
7040.040 191
7040.060 192
7040.065 192
7040.070 193
7040.075 193
7040.110 191
7040.120 191
7040.201 191
7040.202 191
7040.204 191
7040.211 191
7040.212 191
7040.214 191
7040.301 192
7040.305 192
7040.311 192
7040.315 192
7040.361 193
7040.500 198
7050.035 574
7050.100 574
7050.200 574
7051.000 489
7061.000 489
7063.000 560
7063.200 539
7063.710 485
7063.720 485
7063.725 485
7063.740 560
7063.750 559
7063.752 559
7063.835 484
7063.837 484
7063.850 563
7063.858 488
7063.860 488
7063.882 559
7063.883 559
7063.884 559
7063.888 614
7063.890 488
7063.892 488
7063.895 484
7063.897 484
7064.000 489
7064.100 533
7064.110 533
7065.000 489
7066.000 489
7066.700 489
7067.100 400
7067.200 400
7069.535 569
7072.100 522
7072.200 518
7072.220 530
Model No. Page
7072.230 to 7463.100
7072.230 530
7072.240 530
7077.000 529
7078.000 529
7081.000 489
7086.535 569
7087.535 569
7089.535 569
7091.000 465
7094.100 568
7094.110 568
7094.120 568
7094.130 567
7094.140 567
7095.000 465
7096.000 465
7097.000 529
7097.220 529
7097.260 529
7097.300 529
7097.340 529
7098.000 529
7098.100 529
7099.000 529
7100.000 465
7102.000 465
7109.035 293
7109.200 497
7111.000 534
7111.100 534
7111.210 537
7111.212 537
7111.214 537
7111.220 537
7111.222 537
7111.224 537
7111.250 538
7111.252 538
7111.300 531
7111.310 531
7111.350 531
7111.900 534
7112.000 534
7113.000 504
7115.000 490
7116.500 535
7119.140 486
7119.155 486
7119.250 487
7119.255 487
7119.400 487
7119.455 487
7124.035 547
7140.535 542
7143.035 482
7144.035 482
7145.005 482
7145.035 482
7145.535 483
7145.605 482
7145.635 482
7145.705 482
7145.735 482
7147.035 489
Model No. Page
7148.035 485
7149.035 540
7149.135 540
7150.535 542
7151.005 571
7151.035 571
7151.105 571
7151.110 571
7151.206 565
7151.208 565
7151.300 566
7152.005 571
7152.035 571
7153.005 571
7153.035 571
7154.035 570
7156.005 571
7156.035 571
7157.035 571
7158.035 540
7158.100 541
7158.150 541
7159.035 539
7161.000 489
7161.700 489
7163.500 490
7163.550 490
7163.560 490
7163.565 490
7164.035 480
7165.035 480
7166.035 480
7166.735 480
7167.000 571
7169.535 573
7170.535 573
7174.535 573
7178.535 573
7183.100 487
7184.035 480
7185.035 480
7186.035 480
7186.735 480
7200.001 510
7200.210 585
7200.214 585
7200.215 585
7200.216 585
7200.217 585
7200.450 585
7200.630 508
7200.800 417
7200.810 417
7218.035 533
7219.035 533
7220.500 536
7220.600 534
7228.035 533
7240.110 505
7240.120 505
7240.130 506
7240.150 506
7240.160 506
7240.170 506
Model No. Page
7240.190 506
7240.200 505
7240.201 505
7240.205 505
7240.210 505
7240.220 505
7240.230 505
7240.240 505
7240.250 505
7240.260 505
7240.280 505
7240.290 505
7240.300 507
7240.305 507
7240.310 505
7240.330 505
7240.370 505
7240.510 505
7240.512 505
7240.600 507
7241.005 572
7241.015 573
7241.024 573
7241.045 573
7241.065 573
7241.500 572
7242.005 572
7242.015 573
7246.010 562
7246.030 562
7246.060 562
7246.100 562
7246.400 562
7246.420 557
7246.500 566
7255.035 539
7256.035 541
7257.005 539
7257.035 539
7257.050 540
7257.100 539
7257.105 539
7257.150 540
7257.200 539
7264.035 480
7265.035 480
7266.035 480
7269.135 540
7269.235 541
7280.035 508
7280.100 509
7281.035 614
7281.200 613
7282.035 563
7282.135 563
7283.035 563
7284.135 555
7296.000 558
7297.000 558
7298.000 558
7299.000 558
7300.230 574
7300.240 574
7300.250 574
Model No. Page
7300.335 570
7320.435 584
7320.440 586
7320.441 586
7320.472 596
7320.475 596
7320.481 596
7320.485 596
7320.491 586
7320.530 583
7320.560 583
7320.570 583
7320.620 583
7320.630 583
7320.631 583
7320.700 583
7320.721 583
7320.730 587
7320.790 589
7320.792 589
7320.793 589
7320.794 589
7320.795 589
7320.796 589
7320.810 587
7320.812 587
7320.813 584
7320.814 585
7320.820 587
7320.830 586
7320.950 583
7338.120 328
7338.130 328
7338.160 329
7338.161 329
7338.162 329
7338.163 329
7338.164 329
7338.165 329
7338.166 329
7338.167 329
7338.168 329
7338.170 329
7338.171 329
7338.220 328
7338.320 328
7391.000 89
7394.035 569
7396.000 89
7400.000 89
7401.000 558
7402.000 558
7404.000 506
7408.510 506
7411.000 558
7412.510 506
7433.035 570
7437.035 570
7445.000 89
7450.035 572
7451.000 67
7455.030 522
7462.000 67
7463.100 67
Model No. Page
7463.200 to 7824.282
7463.200 67
7464.035 480
7465.035 480
7466.035 480
7466.735 480
7469.535 573
7470.535 573
7474.535 573
7478.535 573
7480.035 509
7480.300 509
7484.035 480
7485.035 480
7486.035 480
7486.735 480
7492.060 560
7492.070 560
7492.300 560
7492.400 560
7492.500 560
7493.000 373
7493.100 373
7493.230 373
7494.000 558
7495.000 374
7501.000 54
7501.100 567
7502.013 57
7502.014 57
7502.016 57
7502.024 57
7502.026 57
7502.034 57
7502.035 57
7502.036 57
7502.044 58
7502.045 58
7502.046 58
7502.054 58
7502.056 58
7502.064 58
7502.066 58
7502.114 58
7502.124 58
7502.126 58
7502.136 58
7502.144 58
7502.146 58
7502.166 58
7502.203 554
7502.204 554
7502.205 554
7502.206 554
7502.220 424
7502.240 503
7502.260 503
7502.302 528
7502.304 528
7502.310 517
7502.436 57
7502.446 58
7502.630 59
7502.660 59
7507.000 55
Model No. Page
7507.010 55
7507.020 56
7507.030 56
7507.100 55
7507.110 55
7507.120 56
7507.200 56
7507.210 56
7507.220 56
7507.706 554
7507.709 554
7507.712 554
7507.715 554
7507.718 554
7507.721 554
7507.740 374
7507.750 371
7507.755 371
7507.760 222
7526.050 424
7526.750 383
7526.755 383
7526.760 383
7526.770 383
7526.780 383
7526.785 383
7526.790 383
7526.795 383
7526.800 383
7526.807 436
7526.820 383
7526.827 436
7526.829 383
7526.834 383
7526.850 383
7526.860 383
7526.964 470
7541.000 504
7542.000 504
7543.000 504
7544.000 504
7545.000 504
7546.000 504
7547.000 504
7548.000 504
7548.210 502
7549.000 504
7552.002 591
7552.020 592
7552.030 592
7552.040 592
7552.100 591
7552.110 591
7552.120 596
7552.122 596
7552.140 596
7552.142 596
7552.200 594
7552.201 595
7552.202 595
7552.203 595
7552.204 595
7552.205 595
7552.212 594
Model No. Page
7552.214 595
7552.220 596
7552.420 596
7552.510 593
7561.500 366
7570.535 573
7574.535 573
7578.535 573
7581.500 366
7582.500 366
7604.000 506
7608.510 506
7610.000 535
7611.000 535
7641.000 65
7643.000 65
7644.000 66
7644.400 487
7645.000 65
7685.000 553
7688.000 553
7696.000 553
7698.000 553
7705.035 518
7705.110 418
7705.120 418
7705.235 517
7705.706 553
7705.709 553
7705.712 553
7705.715 553
7705.718 553
7705.721 553
7706.135 61
7709.135 61
7709.535 60
7709.735 60
7712.135 61
7715.135 61
7715.535 60
7715.735 60
7718.135 61
7721.135 61
7721.535 60
7721.735 60
7752.950 504
7794.420 549
7794.740 549
7816.120 387
7816.200 387
7816.360 404
7816.362 404
7816.380 404
7816.382 404
7820.100 83
7820.200 83
7820.300 83
7820.340 83
7820.350 83
7820.410 83
7820.500 83
7820.510 83
7820.600 84
7820.610 84
Model No. Page
7820.650 84
7820.700 84
7820.710 84
7820.730 84
7820.740 84
7820.750 84
7820.770 84
7820.800 84
7820.810 84
7820.850 84
7821.100 83
7821.200 83
7821.300 83
7821.340 83
7821.410 83
7821.500 83
7821.510 83
7821.600 84
7821.610 84
7821.650 84
7821.700 84
7821.710 84
7821.730 84
7821.740 84
7821.750 84
7821.770 84
7821.800 84
7821.810 84
7821.850 84
7824.086 387
7824.106 387
7824.120 387
7824.126 387
7824.127 403
7824.128 387
7824.130 406
7824.132 406
7824.146 387
7824.148 387
7824.166 387
7824.168 387
7824.180 387
7824.183 403
7824.186 387
7824.188 387
7824.200 387
7824.201 403
7824.202 403
7824.203 403
7824.204 403
7824.205 403
7824.206 387
7824.207 403
7824.208 387
7824.220 387
7824.222 403
7824.223 403
7824.224 403
7824.225 403
7824.226 387
7824.227 403
7824.228 387
7824.280 404
7824.282 404
Model No. Page
7824.310 to 7856.719
7824.310 388
7824.312 388
7824.360 404
7824.362 404
7824.380 404
7824.382 404
7824.490 404
7824.510 388
7824.520 425
7824.522 425
7824.525 425
7824.540 400
7824.560 389
7824.580 389
7824.650 392
7825.150 372
7825.250 372
7825.260 372
7825.342 377
7825.350 382
7825.360 382
7825.361 382
7825.364 381
7825.365 381
7825.366 382
7825.367 383
7825.375 518
7825.380 382
7825.381 382
7825.382 381
7825.384 381
7825.385 381
7825.386 382
7825.387 383
7825.388 382
7825.601 361
7825.603 361
7825.605 361
7825.607 365
7825.608 365
7825.610 381
7825.612 381
7825.620 382
7825.622 383
7825.660 381
7825.680 381
7825.801 361
7825.803 361
7825.805 361
7825.807 365
7825.808 365
7825.810 381
7825.812 381
7825.860 381
7825.880 381
7825.900 375
7826.245 436
7826.360 223
7826.366 223
7826.368 223
7826.480 223
7826.486 223
7826.488 223
7826.588 437
Model No. Page
7826.605 436
7826.625 436
7826.645 436
7826.665 436
7826.669 437
7826.685 436
7826.689 437
7826.750 296
7826.760 437
7826.766 437
7826.768 437
7826.780 437
7826.786 437
7826.788 437
7826.805 436
7826.806 437
7826.809 437
7826.825 436
7826.845 436
7826.865 436
7826.866 437
7826.869 437
7826.885 436
7826.886 437
7826.889 437
7827.000 556
7827.023 557
7827.024 557
7827.050 536
7827.061 549
7827.080 549
7827.081 549
7827.100 549
7827.101 549
7827.120 549
7827.121 549
7827.140 549
7827.141 549
7827.160 549
7827.161 549
7827.180 549
7827.181 549
7827.200 549
7827.201 549
7827.220 549
7827.221 549
7827.300 488
7827.310 538
7827.320 538
7827.330 538
7827.480 556
7827.490 556
7827.520 565
7827.532 565
7827.534 565
7827.536 565
7827.544 566
7827.550 556
7827.554 557
7827.560 556
7827.570 556
7827.590 555
7827.600 556
7827.800 556
Model No. Page
7827.823 557
7827.824 557
7828.040 465
7828.050 465
7828.060 465
7828.061 532
7828.062 532
7828.080 465
7828.081 532
7828.082 532
7828.100 465
7828.101 532
7828.102 532
7828.120 465
7828.121 532
7828.122 532
7828.600 481
7828.660 481
7828.680 481
7828.800 481
7828.880 481
7828.950 483
7828.951 484
7828.960 483
7828.961 484
7828.970 483
7828.971 484
7829.100 504
7829.110 504
7829.150 502
7829.152 502
7829.200 502
7829.300 417
7829.400 479
7830.100 80
7830.110 80
7830.130 81
7830.200 80
7830.202 81
7830.230 81
7830.240 81
7830.250 81
7830.260 82
7830.270 81
7830.330 81
7830.335 81
7830.380 81
7830.550 82
7830.670 82
7830.850 80
7831.429 323
7831.433 92
7831.438 92
7831.442 92
7831.446 92
7831.453 93
7831.463 93
7831.472 535
7831.481 92
7831.485 92
7831.570 529
7831.571 529
7831.611 549
7831.621 549
Model No. Page
7831.631 549
7831.641 549
7831.723 390
7831.724 390
7831.726 390
7831.800 94
7831.802 94
7831.803 94
7831.810 94
7831.812 94
7831.813 94
7855.340 372
7855.342 372
7856.003 202
7856.005 202
7856.006 202
7856.008 202
7856.010 202
7856.011 204
7856.013 204
7856.014 204
7856.015 201
7856.016 202
7856.017 201
7856.018 201
7856.019 204
7856.020 202
7856.022 204
7856.023 204
7856.025 204
7856.026 204
7856.027 204
7856.030 204
7856.043 202
7856.070 203
7856.080 203
7856.081 201
7856.082 203
7856.090 203
7856.095 203
7856.100 203
7856.101 201
7856.110 203
7856.120 203
7856.130 203
7856.140 203
7856.150 203
7856.160 203
7856.170 204
7856.180 203
7856.190 203
7856.201 203
7856.203 510
7856.204 510
7856.220 203
7856.230 203
7856.231 201
7856.240 203
7856.321 202
7856.323 202
7856.710 550
7856.713 550
7856.716 550
7856.719 550
Model No. Page
7856.722 to 8600.665
7856.722 550
7856.725 550
7856.728 550
7856.731 550
7856.734 550
7857.130 200
7857.150 200
7857.180 200
7857.190 200
7857.300 200
7857.310 200
7857.320 200
7857.321 200
7857.350 200
7857.364 193
7857.366 198
7857.372 198
7857.410 196
7857.420 198
7857.421 347
7857.423 347
7857.424 347
7857.430 190
7857.431 190
7857.432 190
7857.433 190
7857.434 190
7857.435 196
7857.437 196
7857.440 196
7857.441 196
7857.442 196
7857.443 197
7857.444 197
7857.445 197
7857.448 197
7857.482 190
7857.483 190
7857.488 196
7857.800 199
7857.801 199
7857.802 199
7857.803 199
7858.100 546
7858.160 532
7858.162 532
7858.200 536
7858.488 224
7859.120 203
7859.130 203
7859.212 203
7859.215 510
7859.222 203
7859.225 510
7859.232 203
7859.235 510
7870.614 569
7870.830 569
7885.000 223
7885.100 223
7885.200 223
7886.000 223
7886.100 223
7886.200 223
Model No. Page
7890.020 597
7890.206 597
7890.208 597
7890.226 597
7890.228 597
7890.500 597
7950.100 554
7950.150 430
7950.200 430
7952.100 496
7963.310 560
7963.410 560
7963.510 560
7963.610 560
7963.710 560
7966.035 221
7967.000 438
7968.035 221
7980.000 222
7980.100 222
7980.148 222
7986.035 221
7988.035 221
7990.012 346
7990.014 346
7990.101 345
7990.103 345
7990.201 345
7990.203 345
7990.205 345
7990.206 345
7990.207 345
7990.208 345
7990.209 345
7990.210 345
7990.211 345
7990.213 346
7990.301 345
7990.303 345
7990.305 345
7990.306 345
7990.307 345
7990.308 345
7990.309 345
7990.310 345
7990.311 345
7990.313 346
7995.969 323
7995.992 322
7999.892 323
7999.893 323
7999.896 324
7999.897 324
7999.898 322
7999.961 326
7999.962 326
7999.963 326
7999.964 326
7999.965 326
7999.966 326
7999.970 323
7999.977 324
7999.978 324
7999.979 324
Model No. Page
7999.980 324
7999.981 324
7999.982 324
7999.983 324
7999.984 324
7999.985 324
7999.986 324
7999.987 324
7999.988 324
7999.989 324
7999.990 324
7999.991 326
7999.992 326
7999.999 322
8000.100 359
8000.500 359
8001.040 358
8001.050 358
8001.060 358
8001.240 358
8001.250 358
8001.260 358
8001.280 358
8001.450 358
8001.460 358
8001.601 358
8001.605 358
8001.621 358
8001.625 358
8001.650 358
8001.660 358
8001.661 358
8001.665 358
8001.680 358
8001.681 358
8001.685 358
8001.800 358
8001.801 358
8001.805 358
8001.821 358
8001.825 358
8001.840 358
8001.850 358
8001.861 358
8001.880 358
8001.881 358
8001.885 358
8001.940 358
8001.950 358
8004.500 73
8005.500 73
8006.500 74
8080.500 71
8084.500 71
8100.235 385
8104.235 385
8104.500 386
8105.235 385
8105.500 386
8106.235 385
8106.500 386
8106.580 76
8108.235 385
8108.500 386
Model No. Page
8115.235 385
8126.235 385
8126.500 386
8128.235 385
8145.235 385
8146.235 385
8148.235 385
8165.235 385
8166.235 385
8168.235 385
8170.235 385
8173.235 385
8174.235 385
8175.235 385
8176.235 385
8180.235 385
8184.235 385
8184.500 386
8185.235 385
8185.500 386
8186.235 385
8186.500 386
8188.235 385
8204.500 73
8205.500 73
8206.500 74
8208.500 74
8226.500 75
8245.500 70
8265.500 71
8284.500 71
8285.500 72
8286.500 72
8360.920 366
8366.000 108
8366.100 108
8366.200 108
8366.300 108
8366.400 108
8368.000 108
8368.100 108
8404.300 401
8450.600 172
8450.680 76
8451.600 172
8452.600 172
8453.600 172
8454.600 172
8455.600 172
8456.600 172
8457.600 172
8484.300 401
8504.300 401
8505.300 401
8584.300 401
8585.300 401
8600.255 363
8600.265 363
8600.455 363
8600.465 363
8600.510 363
8600.520 363
8600.655 363
8600.665 363
Model No. Page
8600.855 to 8800.080
8600.855 363
8600.865 363
8601.000 361
8601.010 362
8601.015 362
8601.025 362
8601.026 362
8601.030 362
8601.040 362
8601.050 362
8601.060 362
8601.065 362
8601.080 362
8601.085 362
8601.086 362
8601.100 362
8601.110 365
8601.130 365
8601.140 365
8601.200 361
8601.300 361
8601.400 361
8601.450 370
8601.500 361
8601.600 361
8601.602 361
8601.605 361
8601.640 77
8601.660 77
8601.680 370
8601.800 361
8601.802 361
8601.805 361
8601.850 361
8601.860 77
8601.905 361
8601.915 361
8601.920 361
8601.980 361
8602.000 361
8602.015 362
8602.025 362
8602.030 362
8602.040 362
8602.050 362
8602.060 362
8602.065 362
8602.080 362
8602.085 362
8602.100 361
8602.200 361
8602.400 361
8602.500 361
8602.600 361
8602.605 361
8602.800 361
8602.805 361
8602.850 361
8602.905 361
8602.915 361
8602.920 361
8602.980 361
8604.300 401
8604.500 73
Model No. Page
8605.300 401
8605.500 73
8606.300 401
8606.500 74
8608.500 74
8609.020 392
8609.030 392
8609.040 389
8609.050 389
8609.060 389
8609.080 389
8609.100 390
8609.110 390
8609.120 390
8609.130 390
8609.140 391
8609.150 391
8609.160 391
8609.170 391
8609.190 391
8609.260 389
8609.390 391
8609.840 389
8609.850 389
8609.860 389
8610.600 402
8610.620 402
8610.680 402
8610.800 402
8610.820 402
8610.880 402
8611.010 415
8611.020 415
8611.030 415
8611.040 415
8611.045 415
8611.050 415
8611.060 415
8611.070 415
8611.080 402
8611.100 421
8611.110 421
8611.120 421
8611.130 421
8611.140 421
8611.150 421
8611.160 421
8611.170 421
8611.180 416
8611.190 416
8611.200 416
8611.210 418
8611.220 421
8611.250 415
8611.260 415
8611.270 415
8611.280 415
8611.290 415
8611.300 402
8611.330 415
8611.340 415
8611.350 415
8611.360 415
8611.370 417
Model No. Page
8612.000 459
8612.010 460
8612.020 459
8612.030 459
8612.040 459
8612.050 459
8612.060 459
8612.080 459
8612.100 459
8612.120 459
8612.130 459
8612.140 459
8612.150 459
8612.160 459
8612.180 459
8612.200 450
8612.240 462
8612.250 462
8612.260 462
8612.280 462
8612.400 469
8612.410 469
8612.500 460
8612.520 460
8612.550 460
8612.560 460
8612.580 460
8612.600 450
8612.650 461
8612.660 461
8612.680 461
8612.750 461
8612.760 461
8612.780 461
8612.960 466
8612.980 466
8613.000 551
8613.010 552
8613.020 551
8613.030 552
8613.040 552
8613.060 551
8613.070 551
8613.080 551
8613.150 561
8613.160 561
8613.180 561
8613.300 552
8613.360 552
8613.640 77
8613.660 77
8613.860 77
8614.040 448
8614.050 448
8614.060 448
8614.100 449
8614.180 451
8614.200 451
8614.240 448
8614.250 448
8614.260 448
8614.640 448
8614.650 448
8614.660 448
Model No. Page
8614.675 448
8614.680 448
8614.840 448
8614.850 448
8614.880 448
8616.602 262
8616.622 262
8616.700 263
8616.710 263
8616.720 263
8616.750 263
8616.760 263
8616.761 263
8616.762 263
8616.772 263
8616.773 263
8616.802 262
8616.822 262
8626.300 401
8626.500 75
8645.500 70
8665.500 71
8684.300 401
8684.500 71
8685.300 401
8685.500 72
8686.300 401
8686.500 72
8700.000 396
8700.010 76
8700.060 385
8700.120 511
8700.140 399
8700.150 399
8700.160 399
8700.600 511
8700.680 76
8700.800 511
8700.840 385
8700.850 385
8701.000 367
8701.040 367
8701.050 367
8701.060 367
8701.180 425
8701.200 367
8701.600 367
8701.800 367
8702.000 367
8702.040 367
8702.050 367
8702.060 367
8702.200 367
8702.600 367
8702.800 367
8800.020 425
8800.030 425
8800.040 402
8800.050 444
8800.060 511
8800.070 418
8800.071 386
8800.075 377
8800.080 511
Model No. Page
8800.090 to 9665.780
8800.090 444
8800.100 511
8800.110 387
8800.120 511
8800.130 462
8800.150 479
8800.160 479
8800.170 399
8800.180 479
8800.190 425
8800.200 376
8800.210 376
8800.220 375
8800.230 425
8800.240 479
8800.280 445
8800.290 375
8800.300 463
8800.310 463
8800.320 463
8800.330 473
8800.340 477
8800.350 477
8800.360 471
8800.370 472
8800.380 463
8800.390 363
8800.400 395
8800.410 395
8800.420 396
8800.430 397
8800.470 398
8800.490 396
8800.500 395
8800.510 525
8800.520 525
8800.531 526
8800.540 525
8800.560 488
8800.570 525
8800.580 488
8800.590 395
8800.600 499
8800.610 444
8800.620 499
8800.630 444
8800.640 464
8800.650 464
8800.660 499
8800.670 399
8800.680 499
8800.690 500
8800.710 425
8800.750 526
8800.751 526
8800.752 526
8800.753 526
8800.754 526
8800.806 471
8800.808 471
8800.830 377
8800.840 399
8800.850 399
8800.860 399
Model No. Page
8800.880 399
8800.892 399
8800.900 481
8800.910 481
8800.920 366
8800.950 425
8801.000 405
8801.010 405
8801.310 296
8801.320 296
8801.330 296
8801.340 296
8801.350 296
8801.380 296
8801.450 405
8801.735 433
8801.745 433
8801.755 433
8801.765 433
8801.775 433
8802.060 512
8802.065 513
8802.080 512
8802.085 513
8802.100 512
8802.105 513
8802.120 512
8802.125 513
8802.160 512
8802.165 513
8802.220 446
8802.260 446
8802.280 446
8804.300 401
8804.500 73
8805.300 401
8805.500 73
8806.300 401
8806.500 74
8806.580 76
8808.500 74
8826.500 75
8845.500 70
8865.500 71
8880.500 72
8881.500 72
8884.500 71
8885.500 72
8886.500 72
8900.050 393
8900.060 393
8900.840 393
8900.850 393
9055.310 590
9055.312 590
9055.410 590
9055.412 590
9100.210 32
9101.210 32
9102.210 32
9103.210 32
9104.210 32
9105.210 32
9105.700 33
Model No. Page
9106.210 32
9107.210 32
9108.210 32
9108.700 33
9110.210 32
9110.700 33
9111.210 32
9112.210 32
9112.700 33
9113.210 32
9113.700 33
9114.210 32
9114.700 33
9116.210 32
9116.700 33
9117.210 32
9117.700 33
9118.210 32
9118.700 33
9119.210 32
9121.122 33
9121.160 33
9121.230 33
9123.000 33
9201.600 177
9202.600 177
9203.600 177
9204.600 177
9205.600 177
9206.600 177
9207.600 177
9208.600 177
9209.600 177
9214.000 503
9266.000 440
9301.000 176
9302.000 176
9303.000 176
9304.000 176
9305.000 176
9306.000 176
9401.600 176
9402.600 176
9403.600 176
9404.600 176
9405.600 176
9406.600 176
9407.600 176
9408.600 176
9409.600 176
9500.000 28
9500.050 30
9502.000 28
9504.000 28
9505.000 28
9506.000 28
9507.000 28
9508.000 28
9508.050 30
9508.100 28
9509.000 28
9509.100 28
9510.000 28
9510.100 28
Model No. Page
9511.000 29
9511.100 29
9512.000 29
9512.100 29
9513.000 29
9513.100 29
9514.000 29
9514.050 30
9514.100 29
9515.000 29
9515.100 29
9516.000 29
9516.100 29
9517.000 29
9517.100 29
9518.000 29
9518.100 29
9519.000 29
9519.100 29
9520.000 29
9520.100 29
9521.000 29
9521.050 30
9521.100 29
9522.000 29
9522.100 29
9523.000 29
9523.100 29
9524.000 29
9524.100 29
9530.000 30
9531.000 30
9545.000 31
9547.000 31
9548.000 31
9549.000 31
9550.000 31
9564.000 31
9565.000 31
9566.000 31
9567.000 31
9568.000 31
9580.000 31
9581.000 31
9582.000 31
9583.000 31
9659.525 434
9659.535 434
9659.545 434
9659.555 434
9660.210 469
9660.220 469
9660.235 434
9660.245 434
9660.255 434
9660.265 434
9660.935 434
9660.945 434
9660.955 434
9660.965 434
9665.750 435
9665.760 435
9665.770 435
9665.780 435
Model No. Page
9665.785 to 9911.396
9665.785 435
9665.903 434
9665.913 434
9665.923 434
9665.943 434
9665.953 434
9665.963 434
9671.446 434
9671.448 434
9671.468 434
9671.488 434
9671.536 434
9671.538 434
9671.546 434
9671.548 434
9671.568 434
9671.586 434
9671.588 434
9671.636 434
9671.638 434
9671.646 434
9671.648 434
9671.666 434
9671.668 434
9671.686 434
9671.688 434
9671.736 434
9671.738 434
9671.746 434
9671.748 434
9671.766 434
9671.768 434
9671.786 434
9671.788 434
9671.846 434
9671.848 434
9673.901 475
9673.902 475
9673.903 475
9673.915 468
9673.920 468
9673.940 468
Model No. Page
9673.941 468
9673.950 468
9673.951 468
9673.953 468
9673.960 468
9673.961 468
9673.981 468
9673.983 468
9673.995 468
9674.056 469
9674.058 469
9751.015 186
9751.025 186
9751.035 186
9751.045 187
9751.055 187
9751.065 187
9751.075 186
9751.085 187
9752.015 187
9752.025 187
9753.015 186
9753.025 187
9753.035 186
9753.045 186
9753.055 186
9753.065 187
9753.075 186
9753.085 186
9753.095 186
9753.105 187
9753.115 186
9753.125 186
9753.135 186
9753.145 187
9753.155 186
9753.165 186
9753.175 186
9753.185 186
9753.195 186
9753.205 186
9754.015 186
Model No. Page
9754.025 186
9754.035 187
9754.045 187
9755.015 186
9755.025 187
9755.035 187
9755.045 187
9755.055 187
9755.065 186
9756.015 186
9756.025 187
9756.035 187
9756.045 187
9756.055 187
9756.065 186
9757.015 186
9757.025 187
9757.035 187
9757.045 187
9757.055 187
9757.065 186
9758.015 186
9758.025 187
9758.035 187
9758.045 187
9758.055 187
9761.212 287
9762.212 287
9764.040 287
9765.051 287
9765.071 368
9765.072 368
9765.082 368
9765.083 368
9765.084 368
9765.085 368
9765.086 368
9765.087 368
9765.088 368
9765.089 368
9765.090 451
9765.092 451
Model No. Page
9765.095 451
9765.096 451
9765.097 451
9765.120 441
9765.150 497
9765.182 368
9765.191 451
9768.152 287
9774.105 185
9774.205 185
9774.305 185
9774.405 185
9776.102 286
9776.152 286
9776.500 286
9776.550 286
9783.510 183
9783.520 183
9783.530 183
9783.540 183
9783.550 183
9783.610 183
9784.520 184
9784.540 184
9784.620 184
9784.640 184
9785.040 416
9785.042 416
9785.511 384
9785.512 384
9785.513 384
9785.514 384
9791.015 182
9791.025 182
9791.035 182
9791.045 182
9911.396 611
Model No. Page
Index
A
Access sensor 583
Accessories 355 624
Climate control 291 305
for cast aluminium enclosures GA 33
for Data Rack 558
for polycarbonate enclosures PK 31
for Power System Module 204
for UPS 196 199
Hygienic Design 156, 157
Support arm systems 142 146
TopConsole 105
Accommodation system, 2 U
for LSA installation kit 574
Acoustic components
for signal pillars, modular 621
Acrylic glazed cover 408
Active kit for TE 224
Adaptor
3 U 562
for levelling feet 375
for L-shaped mounting angles 488
for Siemens Pro-Panel 142
for twin castors 375
Metric to 482.6 mm (19) 562
Adaptor bracket
for TS 471
Adaptor frame
for wall-mounted cooling units 298
Adaptor kit, 3 U 562
Adaptor pieces, 482.6 mm (19)
for TS, ES 552
Adaptor power pack
for LED system light 495
Adaptor rail
for PS compatibility 463
Adaptor sections, 482.6 mm (19)
for TS 551
for TS electronic enclosures 552
Adaptor sleeve, Flex-Block 359
Adaptors
for connector cut-outs 392
Add-on cover 283
Add-on unit
GSM unit quad-band 587
Adhesive measurement strip 554
Adjacent door latch for TS 417
Adjustable frame
for air/air heat exchangers 297
Adjustment set for support section 143
AE
Compact enclosures 44 46
Wall-mounted distributors 65, 66
AE Laser Express 337
Air baffle plates for TS 565
Air diverter 293
Air duct system
and air/water heat exchangers 291
Air/air heat exchangers 226 229
Wall-mounted,
railway-compatible version 228
Air/water heat exchangers 252 261
Aisle containment 278
All-glass door for DK-TS 404
Alternate frame, magnetic 430
Aluminium rivet 526
Aluminium strip 601
Analog airflow sensor 583
Analog differential pressure sensor 583
Angle adaptor 90 146
Angle bracket PS 473
Angle piece 474
Angular baying brackets 397, 398
Anti-twist guard
for cable shunting ring 534
AP universal consoles 107
Assembly block for TS 463
Assembly parts
for system punchings 501
Assembly screws 568
Assembly tool
for HD cable gland 521
Attachment
for punched section
with mounting flange TS 460
for wall mounting HD 156
Pole clamp 441
Auto Range power pack 302
B
Base
for tubular door frame 616
Base configuration rail for CM 461
Base frame, divided 377
Base module for cable entry 383
Base mount
for cast feet 151
Base mounting bracket 376
Base mounting plate
for base/plinth 364
Base/plinth
Complete, sheet steel 369
Complete, stainless steel 370
for areas at risk from earthquakes 77
for FlatBox 371
Stationary 366
Base/plinth adaptor
for levelling feet 375
for twin castors 375
Base/plinth baying brackets 362
Base/plinth cap 365
Front and rear, sheet steel 361
Front and rear, stainless steel 367
Base/plinth trim panels
Side, sheet steel 362
Side, stainless steel 367
with brush strip 365
with designer trim panels 366
Base/plinth trim, modular 367
Basic enclosures CS 183, 184
Basic modules
CMC III Processing Unit 580
CMC III Processing Unit Compact 580
Basic Safe 322
Battery Manager RiBat 199
Battery packs
for PMC 12 196
Baying attachment 399
Baying brackets
for TS base/plinth 362
for TS/TS and TS/PS 398
Baying clamp 395, 396
for back-to-back mounting 399
Baying clip, Flex-Block 359
Baying connector
for Data Rack 558
for TS 396, 400
Baying cover, top 399
Baying kit
for KL, AE 400
for TE/TE 400
Baying seal, EMC 500
Baying system 394 401
Baying systems TS 8 70 77
IP 66/NEMA 4X 76
Stainless steel 172
Bit HD 156
Blanking cover
for fan-and-filter units/outlet filters 303
for fibre-optic cut-outs 574
Blanking panel 571
Blanking plates, 482.6 mm (19) 564
Bottom-mounted adaptor
for enclosure internal thermostat
and hygrostat 294
Bracket
Wall bracket KS 440
Wall bracket TS/ES 440
Bracket/spacer 474
Brush strip 518
Vertical 566
Built-in keyboard 19/4 U 609
Bus enclosures BG 39 41
Stainless steel 161
BUS system SK 295
C
C rails 465 467
for cable chamber enclosures 469
Cable attachment 530
Cable chamber for TS 363
Cable clamp rails
C rail 527
Depth-variable 532
for TS and 482.6 mm (19)
mounting frames 532
Mounting angle 527
Cable clamp strap
for patch panels 535
Cable clamp, variable 532
Cable clamping bracket 528
Cable clamps
for cable clamp rails 527
for C rails 529
Cable conduit/cable conduit holder 529
Cable duct
for mounting plate 526
for TS/TE 538
for vertical TS section 525
Cable entry
on gland plate for TS, CM, TP 512, 513
Cable entry glands 435
Cable entry grommets 512
Cable entry module CP-L, round 524
Cable entry panel
482.6 mm (19) 542
Cable entry plates 511
Cable gland plates
Metal 516, 517
Plastic 514, 515
Cable glands
Brass 519
EMC 499
for fibre-optic technology 522
for IW worktops 522
Polyamide 519
Stainless steel, HD 521
Cable lock PSM 204
Cable management 525 536
Cable management duct
Horizontal, 482.6 mm (19) 541
Cable management panel 539 541
2 U 540
for DK-TS 389
Cable manager 533
Cable route
for TS 536
Vertical, for TS 536
Cable routing
482.6 mm (19) mounting level 537 542
Snap-in 531
Cable routing bars 537
Cable routing channel
482.6 mm (19) 540
Cable shunting ring 534
Cable support, hinged 490
Cable tie fastener 531
Cable ties 530
Cable tray
on the mounting frame 536
Index
Cable tray, 2 U 541
Cage nut front mounting,
482.6 mm (19) 568
Cam lock HD 156
Cam locks 421
for operating panel 410
Captive nuts M5/M6 567
Captive nuts/threaded blocks 477
Cast aluminium enclosures GA 32, 33
Cast feet 371
Castors 374
Cat 5 patch cable 596
CD/disk box 427
Central earthing point 502
Chillers for IT cooling 272
Chillers for water
in floor-standing enclosure 268, 269
TopTherm 264 267
Circuit-breaker 10 A
Connection component 496
Clamp rails for cables 527
Clamp strip, foam rubber 513
Client Access licence 346
Climate control
Modular Safe/Extend 325, 326
Climate control doors 249
Climate control system CW 274
Climate control system DX 276
Climate control units
for CS Toptec 286
Clipboard 603
Clips for gland plate 377
CM base configuration rail 461
CM compact system enclosures 48, 49
CM configurator 343
CMC III
CAN-Bus connection cable 584
CAN-Bus Unit 580
I/O Unit 581
Monitoring system 578
Mounting unit 585
Power Unit 581
Processing Unit 582
Processing Unit Compact 582
Cold Plate
for frequency converters 262
Combination angle 398
Combination rails 528
Comfort handle 415, 589
Comfort Panel 116, 117
Command panel
Stainless steel 166, 167
With display panel front 123
Command panel configurator 343
Command panel housing with door 121
Compact climate control Modular Safe 325
Compact enclosures
AE 44 46
EMC 179
HD 155
Compact light 493
Compact Panel 120
Wall mounting bracket 442
Compact swing frame
for AE 547
Compact system enclosures CM 48, 49
Compensating panel for TS 400
Complete earthing kit 503
Extension kit 502
Component shelf
482.6 mm (19) installation 482
for attachment to the 482.6 mm (19)
system punchings 485 487
for frame attachment 480, 481
Heavy-duty 483, 484
Installation kits 488
Static installation on the
482.6 mm (19) mounting frame 483
Concrete base/plinth 368
Condensate collecting bottle 302
Condensate discharge 384
Condensate hose 303
Condenser unit 283
Connecting plinth trim 365
CMC III 583
for LED system light 495
for lights 496
Connection adaptor
CP-L to CP-L 142
CP-L to CP-XL 142
for signal pillar, LED compact 618
Connection cable/extension 585
Connection cables 596
CAN-Bus 584
for LED system lights 495
for lights 496
for power pack, TFT monitor 606
for PSM busbar 204
for Beckhoff Control-Panels 142
Connection cover 604
Connection element
with air circuit-breaker 496
Connection hose, bottom and top 283
Connection kit 305
Connection plates CP-L 143
Connector gland 522, 524
Sealing frame 523
Sealing modules 523
Connector grommets 512
Connector pieces
for TS punched rail 17 x 17 mm 475
Frame connector piece for TS 475
Connectors
Enclosure surface connector 603
for enclosures 441
for frame 442
Console for SSC 594, 595
Consoles
One-piece consoles AP 170
One-piece consoles TP 106
TopConsole 98 105
Universal consoles TP 107
Contact cutter 500
Contact paint 500
Contact washers 501
Control unit for EC fan-and-filter units 294
Converter for SSC 595
Cooling medium for recooling systems 305
Cooling modules Blue e 248
Cooling units
for CS modular enclosures 287
for CS Toptec 286
Roof-mounted 244, 247
Wall-mounted 233, 243
Corner connectors
Corner enclosures TS 8 401
Corner handle 602
Courtesy light 492
Cover
Acrylic glazed 408
Cover cap
for TS base/plinth components 365
Cover hinge
for KL 425
Cover plates
for connector cut-outs 392
for fan panels FlatBox 222
for support arm connection 604
Cover retainer
for KL 425
Cover with door for TS 392
CP housing couplings
for desktop mounting 144
CP-C support arm system 134 137
CP-L support arm system 130 133
CP-L to CP-L 142
CP-S, steel, support arm system 126 129
CPU cable for SSC 596
CP-XL support arm system 138 141
CRAC system CW 274, 275
CRAC system DX 276, 277
Crane bracket 398
Cross member
adjustable 370
Cross-brace
for mounting plates, for TS, ES 447
CS
Modular enclosures 186, 187
New Basic enclosures 183, 184
Toptec 185
Wall-mounted enclosures 182
D
Data Centre Container DCC 327
Data distributors 569
Data Rack 88
DC fan mounting plate
for TS 224
Deflector 90 for air duct system 291
Depth stay for mounting angles
PS 553
Depth stays
for Data Rack 558
for mounting angles 556, 557
Depth stays for mounting angles
TS 556
temperature display and thermostat 293
Display board with bracket 603
Display Unit II 586
Distributor clip 538
Distributor racks
Data Rack 88, 558
TE 7000 open 88
Divider kit
for pull-out frame 547
Divider panel
for module plates TS 390
for TS 389
Divider panel seal, EMC 500
Document clip, magnetic 430
Door comfort handle 589
Door control module 589
Door Control System 588
Door kit 589
Door latch mechanism
for bayed suites 393
Door stay for escape routes for TS 429
Door switch 589
Door-mounted fan
for server enclosures TS, TE 225
Door-operated switch 495, 496
Door variants 402 406
Drawer
482.6 mm (19) 563, 609
482.6 mm (19), for keyboard
and mouse 612, 613
482.6 mm (19), for keyboards 614
482.6 mm (19) to accommodate
surplus cable length 539
Installation kits 563
Tray 481
Dust guard trim
for AE, CM, EB, KL, BG 432
for TS, ES 432
Index
E
Earth clamps, EMC 500
Earth rails 504
Earth straps 501
Earthing kit
for KL 503
for QuickBox 503
KE, for KL, AE, TS 503
Pre-assembled, for DK-TS 504
Earthing kit, complete
for DK-TS 502
for TE 503
Earthing plate 502
Earthing point, central 502
Earthing strap 501
Earthquake base/plinth 77
Earthquake kit, TS 8 77
E-Box EB 37, 38
EMC 178
Edge protector 522
EL wall-mounted distributors 60 64
Electric condensate evaporator 302
EMC
Compact enclosures AE 179
Earth clamps 500
E-Box EB 178
Gland plates 499
Shield bus 498, 499
Shielding bracket 498
EMC cable glands 499
EMC seals
Baying seal 500
Divider panel seal 500
Enclosure attachment
Tilting, base mounting CP-L,
rectangular 143
Tilting, top mounting 145
Enclosure connector, adjustable 441
Enclosure flange 151
Enclosure for tower PC 109
Enclosure heaters 289
Enclosure internal fan
for TS 221
Enclosure internal thermostat 294
Enclosure keys 424
Hygienic Design 156
Enclosure light 497
Enclosure panel fasteners, internal
for TS 386
Enclosure reinforcement 151
Enclosure suites 394
Enclosure surface connector 603
Enclosure systems
PC 108, 109
Stainless steel 171, 172
TS 69 77
Energy-Box 509
Energy-saving extractor plenum 305
Entry grommets
for cables 512
for connectors 512
EPLAN platform 338, 339
Ergoform-S lock system 419
ESD connection point 504
Ex enclosures 174 177
Plastic 177
Stainless steel 176
Explosion-proof cooling units 243
Extension cable 585
Extension kit
for complete earthing kit 502
for earth rail, vertical 504
Eyebolts 438
F
Fan
24 V DC with speed monitoring 587
Fan Control System FCS 587
Fan expansion kit 222
for door-mounted fan TS 225
Fan mounting plate
for TS 221, 224
Fan roof, modular, two-piece
for TS 223
Fan systems
for TS 219
Fan unit, active
for TE 224
Fan-and-filter units
Accessories
for filter technology 299 302
TopTherm 212 216
Fastener
for support arm connection 604
Fastening bolts
for base/plinth 364
for component shelves 490
Feet 371, 373, 374
Fibre-optic
Blanking cover 574
Breakout box, 1 U 572
Cable management panel 541
Patch panels 570, 573
Shunting ring 535
Small distributor, polycarbonate 67
Splicing boxes and accessories 572, 573
Splicing cassette holder 572
Filter holder for roof ventilation 304
Filter mats
for base/plinth component, vented 366
for climate control door/section door 300
for cooling units 299, 300
for discontinued cooling units 299
for heat exchangers 300
for one-piece gland plate 382
for tangential fans/front outlet grilles 299
Fine filter mats
for discontinued fan-and-filter
units/outlet filters 302
for fan-and-filter units 302
Fire alarm and extinguisher
system DET-AC 328 329
Fixture with rods, 3 U
for LSA strips 574
Flat screen 606
FlatBox 55, 56
FlatBox base/plinth 371
Flex-Block 358
Flex-Block base/plinth system 358
Flexible hose 263
Flow regulator valve 304
Fluid distribution manifold 263
FM
Universal mounting bracket 575
Foam rubber cable clamp strip 513
Folding keyboard 609
for CM 416
Fold-out tray
for keyboard and mouse 609
Frame connector
for Comfort Panel 442
Frame connector piece
Front cover 283
Front outlet grille 2 U
for tangential fans 304
Front panels
for Comfort Panel and Optipanel 604
for Compact Panel 604
Fuel cell system 205
G
Gas pressurised spring
for viewing window 408
Gland plate
for CM, TP 378 380
Gland plate modules for DK-TS 382
Gland plate modules, vented 382
Gland plates 514 518
EMC 499
for cable entry 435
for CS New Basic enclosures 384
for DK-TS, multi-piece 381
for TS, one-piece 381
Metal 516 518
Plastic 514, 515
with membranes, plastic 515
Glazed door
for DK-TS 403
for TS 402
Grommets
for cable entry 512
for connector entry 512
GSM unit quad-band 587
Guide
for mounting plate 446
H
Handle adaptor 402
Handle frame
for operating housings 601
Handle set 601
for Optipanel 600
Handles
Corner handle 602
Folding lever handle 416
for mounting plates 447
Plastic handles 420
Swivel handle 417
T handles 420
U handles 602
Heat exchangers 226
Air/air 226 229
Air/water 252 261
for CS modular enclosures 287
for CS Toptec 286
LCP Inline CW and DX 280
LCP Passive CW 282
LCP rack CW and DX 279
LCP T3+ CW 281
High density cable duct 538
Hinge attachment
for partial mounting plate TS 449
Hinge pin remover 425
Hinged blanking plate 564
Hinged cable support 490
Hinged lid for interfaces 617
Hinges
130/180 425
exterior, for GA 33
for blanking plates 564
for PK 31
for TS side panel 387
Holder
for cable conduit 529
for mouse 615
for protective bar 405
for TFT 607
Horizontally hinged FT stay 408
Hose-proof hood 303
Housing coupling
CP-XL for desktop mounting 144
Index
HPC racks
for High Performance Cooling 94
Hygienic Design HD
Accessories 156, 157
Bit 156
Cable gland 521
Cam lock 156
Compact enclosures 155
Enclosure key 156
Levelling feet 156
Rails for interior installation 157
Terminal boxes 154
Wall spacer bracket 156
Hygrostat 294
I
Identification strips 409, 432
for patch panels 571
Incandescent lamps
for steady and flashing light
components 620
Industrial Workstations 110, 111
Base for tubular door frame 616
Cast feet 371
Infill panels
for adaptor sections 552
for TS network enclosures 565
Infrared acess sensor 583
Installation examples,
rail systems 456 458
Installation kit
Depth-variable 488, 563
for back-to-back mounting plates TS 445
for component shelves 488, 563
for drawers 488, 563
for mounting angles 555 557
for swing frame, small 543
TS, width-variable 556
Integrated louvres 298
Interconnecting cables
for lights 495
Interface box 616
Interface board 295
Interface extension with wall connection
and built-in RJ 45 module 616
Interface flaps
modular 617
Interior door for AE IP 69K 406
Rails for CM, TP 459
Rails for AE 459
Internal latch
for side panel, lockable 388
IP 66 baying systems TS 76
IP console
for SSC premium 595
ISDN unit 586
Isolator door cover 393
IT configurator 343
J
Junction box
with multi-functional bracket 508
K
Key 424
Keyboard
Built-in keyboard with touchpad 609
Pull-out 608
Keyboard drawer 612 614
Keyboard rack, 482.6 mm (19) 611
Keyboard support 610
Keyboard, 482.6 mm (19) 611
Kit for separate frame TS 479
KVM switches 591 596
L
Label panel
Latch for adjacent door TS 417
LCP Inline CW and DX 280
LCP Passive CW 282
LCP rack CW and DX 279
LCP T3+ CW 281
Leakage sensor 583
Levelling component
Levelling feet 371, 373, 374
Hygienic Design 156
Lid for interfaces 617
Lights
1 U 497
Compact light 493
Courtesy light 492
Enclosure light 497
LED 494
Standard light 492
System lights 491
Universal light 492
Lint screen 301
Liquid Cooling Package 279 283
Locating adaptor 143
Lock components for frame TS 402
Lock cover 422, 423
Lock cylinder inserts 422
Lock inserts 416, 421
Lock nut, stainless steel 521
Lock systems
for compact enclosures,
sheet steel 411
for console systems and
industrial workstation, sheet steel 413
for enclosures and cases,
stainless steel 414
for large enclosures, sheet steel 412
Lockable and adjacent door for TS 405
Locking bar latch 418
Louvred grille
for lint screen 301
M
Master/slave adaptor
for Thermoelectric Cooler 295
Measurement module PSM 204
Mechanical maintenance bypass 196
Membrane gland plate 515
Metal filters for climate control units 300
Metal gland plates 516
Microsoft Operations Manager 346
Mini-comfort handle 418
Mini-chillers 264, 265
Mini-fan 222
Modular climate control concept 248, 249
Modular enclosures CS 186, 187
Modular Safe 323
Modular Safe Extend 324
Module plates 391
for TE 383
Monitor frame 409
Monitor switches 591, 592
Monitor, flat 606
Monitor/keyboard unit, 1 U 590
Monitoring 577
Monitoring system CMC III 578
Motion detector 583
Mounting
Wall mounting bracket 441
Mounting angles
Additional fastening attachment 555
C rails 465, 467, 469
for CS Basic and modular
enclosures 553
for CS Toptec 549
for DK-EL 553
for FlatBox 554
for QuickBox 554
for TS 549
for VerticalBox 554
Installation kits 553, 555 557
Metric 549
Mounting block for AE 476
Mounting bracket 470, 472
FM universal mounting bracket 575
for CP 470
Mounting clip for support rails 467
Mounting components
for signal pillar 622 624
Mounting frame
482.6 mm (19) 550
for TS 557
Mounting kit
for cable trays 536
for Optipanel 605
for VerticalBox 567
Magnet 493
TS, width-/depth-variable 555
Mounting kit PSM
for busbar 204
Mounting kit, 2 U 557
Mounting panel 482.6 mm (19), 2 U 566
Mounting plates 443, 469, 470
Adjustment bracket for KS 446
Attachment 444, 445
Attachment for CM 447
Cross-brace for TS, ES 447
for cast aluminium enclosures GA 33
for CS Basic and modular enclosures
and for CS Toptec 451
for KL and KL-HD 443
for polycarbonate enclosures 31
for TS 451
Infill for TS 443
Slide block for CM 446
Slide rail for TS 446
Small 450
Transport handles for TS, ES 447
Mounting unit
for enclosure frame 585
Mounting unit, 1 U 586
Mouse holder 615
Mousepad
for keyboard rack 611
Support 610, 614, 615
Multiple lock 423
Multi-seal inserts 520
Multi-tooth screws 478, 567
Index
N
NEMA 4X, NEMA 4
Enclosures TS 76
Wall-mounted cooling units 242
Network cable 596
Network distribution enclosures 78 89
Network enclosures
Based on Rittal TE 7000 85 87
Based on Rittal TS 8 80 84
New Basic enclosures CS 183 184
Noise protection kit for TS 392
Nuts 477
for TS section 471
Nylon loop 530
Nylon loop cable holder 531
O
One-piece consoles
AP, stainless steel 170
TP, sheet steel 106
Operating housing
With handle strips 122
Operating panel 410
Optical components
Optipanel 118, 119
Modular Safe 326
Outdoor enclosures 181 187
Outlet filter 303
Overflow valve 304
Overvoltage protection PSM 204
P
Pair of mounting angles, second 558
Panel 540
with solid tray 570
Paper removal flap 615
Parallel hot swap chassis UPS 197
for ES, CS Basic
and modular enclosures 449
for TS, CS Toptec 448
Locatable 450
Partition 390
Patch cable, Cat 5 596
Patch panels 67, 569 571, 573
PC enclosure systems 108, 109
Stainless steel 171
PE busbar 503
Pedestal, complete 148
Pedestal, modular 147
Perforated mounting strip
for AE stainless steel,
TP universal console 427
Perforated plate
Base/plinth trim, modular 367
Pillar 150
Small 149
Pivot CP-L 145
Plastic
Base/plinth 358, 359
Cable gland plates 514
Enclosures KS 50, 51
Ex enclosures 177
Gland plates 515
Handles 420
Plate
for base mounting 364
Plug-in PSM modules for busbar 201
PMC 12 relay card 196
PMC UPS accessories 196 199
Pole clamp 441
Polyamide reducers
for cable glands 520
Polycarbonate enclosures PK 28 31
Potential equalisation rail 504
Potential equalisation star 502
Power Control for SSC 596
Power Control Unit 510
Power Distribution Rack/Module 200
Power engineering software 341
Power packs
24 V (DC) 302
CMC III 584
for PU II/Basic CMC/FCS 584
for SSC 596
for TFT monitor 606
Power System Module 201 204
Premium Panel 166
Pressure relief stoppers 384
Primer/paint 388
Contact paint 500
Processing Unit Compact, CMC III 582
Processing Unit, CMC III 582
Programming cable 584
Protective bar
for TS 405
PSM busbar 201, 202
PSM socket modules 201 203
Pull-out frame, 482.6 mm (19) 547
Punched rails
17 x 17 mm for TS 468
18 x 38 mm, TS 462
23 x 23 mm, PS 463
23 x 73 mm, PS 464
25 x 38 mm, TS 461
17 x 73 mm, TS 459, 460, 488
23 x 73 mm, PS 464
23 x 73 mm, TS 460
for coupling section 469
Punched section without mounting flange
23 x 73 mm, PS 464
45 x 88 mm, TS 461
Q
Quality management 353
Quick-action vent valve 263
Quick-assembly block 474
QuickBox 57 59
Quick-change frame
for roof-mounted cooling units 297
Quick-fit baying clamps 395
Quick-release fastener 304
for QuickBox 424
R
Rack-mounted fans 217 218
Rail mounting bracket 476
Rail systems 456 470
Rails
Base configuration rail for CM 461
for EMC shielding bracket
and strain relief 498
for interior installation 157
for interior installation AE 459
for interior installation CM, TP 459
Support rails for TS, CM, PC, TP 450
Rain canopies
for AE, CM 431
RCCMD software 347
Reinforcement
for enclosure 151
Reinforcement bracket
for TS, SE, TP universal console 377
Relay card PMC 12 196
RFID
Controller 597
Mounting frame 597
Tags 597
RiBat, Battery Manager 199
RiCAD 3D 337
RiCell Flex fuel cell system 205
Ride-up roller
for TS, ES, PC 430
RiDiag II 347
RiZone software 345, 346
RJ 45
Installation module and extension 616
Roof 431 438
Roof mounting screw 438
Roof plates
for Data Rack 558
for DK-TS 436, 437
for SV-TS 434
Multi-piece 436
TS for cooling units 296
Roof vent 220
Roof-mounted
Cooling units 244 247
Fans 219, 220
Heat exchangers air/air 229
Heat exchangers air/water 252 254
S
Screen, flat 606
Screws 478, 567, 568
Sealing bungs
for cable glands 520
Second pair of mounting angles 558
Section doors for cooling modules 249
Section for cable entry
for TS, CM, TP 512, 513
Security lock 423
Security rooms 331
Self-tapping screws 478
Semi-cylinder lock 422
Server enclosures
Based on Rittal TS 7000 95
Based on TS 8 92, 93
for High Performance Cooling 94
Server Switch Control 591
Service socket 509
Shallow air duct system 292
Shallow duct extension 292
Sheet steel door for DK-TS
Vented 403
Vertically divided 404
Sheet steel glazed door,
vertically divided
for TS 404
Shelves
for AE with pull-out frame 487
See component shelves 480 490
Shield bus, EMC 499
Shielding
Vertical 283
Shunting ring 533, 534
Shunting ring fibre-optic 535
Side panels
Asymmetrical, for TS 386
for cable chamber 363
for TE 388
for top mounting module 433
Lockable, for TS 387
Plug-type, divided 388
Screw-fastened, for TS,
sheet steel 385
Screw-fastened, for TS,
stainless steel 385
Index
Side parts for static installation
of component shelves 489
Signal pillars 618, 619
Optical components 620
Single-phase connection cable 204
SK BUS system 295
Slide rails 558 561
for mounting plate TS 446
for swing frames 548
Small distributor
Fibre-optic, polycarbonate 67
Smoke detector 583
Snap-in cable routing 531
Snap-on nut TS 471
Socket strips 505 507, 510
CMC 508
Sockets 508, 509
Software 337 347
Spacers 426
for roof plate TS 438
Spare filter mat
for base/plinth component 366
for EMC fan-and-filter unit 301
for fan-and-filter units/outlet filters 301
for filter holder 301
for gland plate modules 382, 383
for thermoelectric cooler 301
Spare key 424
Speed control 295
Spring nut
M5 478
Spring nuts
M6 568
Spring washer 418
SSC
compact 591
Console Cat 5 594
Console IP 595
Console local 594
Converter 595
Converter VT100 595
Duo 16 593
Power Control for SSC premium 596
Power Pack 596
premium 592
view 591
Stabiliser bracket for base/plinth TS 372
Stabiliser for TS server enclosures 372
Stainless steel 158 172, 176
AE protection category IP 69K 165
Base/plinth 370
Baying systems TS 8 172
Bus enclosures BG 161
Cable entry plates 511
Cable gland 521
Command panel housing with door 167
Compact enclosures AE 162 164
Cooling units roof-mounted 244 247
Cooling units wall-mounted 234 243
Ex enclosures 176
One-piece consoles AP 170
PC enclosure systems 171
Premium Panel 166
Support arm system CP-S 168, 169
Switch housing 160
Terminal boxes KL 161
Viewing window 409
Stand systems 147 151
Standard light 492
Stationary base/plinth 366
Stay
Door stay for escape routes 429
for door 429
for viewing window 408
Stepped collar 524
Stoppers
for roof-mounted cooling units 292
Straps, earth straps 501
Strengthener
for desk unit 105
Sub-distribution UPS 197, 198
Subracks
Configurator 343
Supplementary unit
ISDN unit 586
Support
for keyboards 610
for mousepad 610, 614, 615
for small appliances 566
Support arm bracket 90 CP-L 145
Support arm configurator 343
Support arm system
Accessories 142 146
CP-C 134 137
CP-L 130 133
CP-S, steel 126 129
CP-XL 138 141
Support arm, height adjustable,
for support arm system CP-L/CP-C 144
Support bracket 473
Support rail, locatable 450
Support rails 467
65 x 42 mm for TS, ES 466
for TS, ES, CM 466
Support strips
for AE 426
for TS, CM, ES, TP 426, 462
Support unit, 3 U 574
Surface connector for enclosures 603
Surplus cable holder 536
Swing frame
Installation kit 543
Large, with trim panel 546
Large, without trim panel 545
Small, for TS 543
Stay 548
Vario, for ES
and CS modular enclosures 544
Switches 591 596
Swivel handle
for sheet steel door DK-TS 417
System accessories 355 624
System attachment
for frequency converters 263
System lights 491, 494
System support rails 466
System supports
for cable routes 535
System window 407
T
T handles 420
Tangential fans 482.6 mm (19) 217, 218
T-connector piece 475
TE 7000
Network enclosures 85 87
Open, distributor racks 88
Server enclosures 95
Telescopic slides
Temperature display
and thermostat 293, 294
Temperature sensor 583
Temperature/humidity sensor 583
Terminal boxes KL 34 36
Cover hinge 425
Cover retainer 425
HD 154
TFT
Monitor 606
TFT display, 15 611
TFT holder 607
TFT holder, vertically hinged 607
Therm software 341
Thermoelectric cooler 232
Threaded adaptor 304
Threaded inserts M6 for KS 478
Three-phase connection cable
for PSM busbar 204
Top mounting module for TS 433
TopConsole system TP 98 105
Accessories 105
Top-hat rail module 569
Top-hat rails 467
TopTherm
Chillers 264 267
Fan-and-filter units 212 216
LCP 279 282
Wall-mounted cooling units 233, 234
TopTherm Blue e
for office and IT applications 246
Roof-mounted cooling units 244 247
Wall-mounted cooling units 235 243
Touchscreen 606
Touchscreen display
for LCP rack, Inline, T3+ 283
TP
One-piece consoles 106
Universal consoles 107
Transport and mounting handle
for TS/ES doors 430
Transport bracket 398
Transport castors
for base/plinth, complete,
sheet steel 370
for TE 375
Transport handles for mounting plates
for TS, ES 447
Transport kit for DK-TS 375
Transport plinth 368
Tray, drawer tray 481
Trim frame
for slimline cooling units 297
for TS 8 406
Trim panels
for base/plinth 366
for cast feet 151
for CM 381
for pedestal 151
for TP 105
TS
Adaptor rail for wiring systems 479
Assembly block 463
Punched rail 461, 462
Punched section
with mounting flange 459, 460
Punched section
without mounting flange 461
Support strips 462
TS 8 configurator 343
TS 8 enclosures 68 77
Corner enclosures 401
Door locking 393
IP 66/NEMA 4X and NEMA 4 76
Isolator door cover 393
Network enclosures 80 84
Server enclosures 90 94
Stainless steel 172
Turn-lock fastener
for PK 31
Twin castors 374
U
U handles 602
U nuts 477
Under-floor frame
for DK-TS 372
Universal bracket 476
Universal consoles TP 107
Universal light 492
Universal lock 583
Universal lock unit 587
Universal mounting bracket FM 575
Index
Universal sensor 583
UPS
PMC 12 190
PMC 120 193
PMC 200 194
PMC 40 (type 1-4) 191
PMC 40 (type 5) 192
PMC 800 195
UPS monitoring card (SNMP card) 198
USB extension 616
Utility bars, vertically hinged 610
Utility lectern 427
Utility table for 482.6 mm (19) 487
V
Vandalism sensor 583
Variable modular climate
control concept 405
Vario swing frame
for ES and CS modular enclosures 544
Vent attachment 219
TS 296
Vent cover 296
Ventilated front panels 564
VerticalBox 54
Viewing window 408
stainless steel 409
Voltage monitor 583
Voltage supply 505 510
W
Wall angle 440
Wall bracket for TS, ES 440
Wall mounting bracket 439, 440
for Compact Panel 442
for CS wall-mounted enclosures 441
Vertically hinged 442
Wall mounting bracket for AE 439
Wall mounting brackets
for cast aluminium enclosures 33
Wall spacer bracket HD 156
Wall-mounted cooling units 233 243
AE 65, 66
CS 182
EL 60 64
QuickBox 57 59
Small fibre-optic distributors 67
Wall-mounted heat exchangers
Air/air 226 228
Air/water 255 261
Wall-mounted network distributors 53 67
Washers, contact washers 501
Width divider 376
Window
Viewing window 408, 409
Viewing window
Windows
System window 407
Wiring plan lectern 427
Wiring plan pockets 428, 429
RAL colours
Colour
RAL
Designation
5002 ultramarine blue
5018 turquoise blue
7015 slate grey
7022 umbra grey
7024 graphite grey
7030 stone grey
7032 pebble grey
7033 cement grey
7035 pale grey
8019 grey brown
9005 jet black
9006 white aluminium
9011 graphite black
9017 traffic black
We reserve the right to further develop-
ments and technical modifications of our
products. Such modifications, along with
errors and printing errata, shall not con-
stitute grounds for compensation.
We refer customers to our Terms of Sale
and Delivery.
2012 / 2013
C
a
t
a
l
o
g
u
e

3
3
Phone +49(0)2772 505-0 Fax +49(0)2772 505-2319
Enclosures
Power Distribution
Climate Control
IT Infrastructure
Software & Services
1
2
.
2
0
1
1

/

E
9
1
3
Catalogue 33
Edition 2012 / 2013
ENCLOSURES POWER DISTRIBUTION CLIMATE CONTROL IT INFRASTRUCTURE SOFTWARE & SERVICES

Catalogue Rittal

Uploaded by

Copyright:

Available Formats

Catalogue Rittal

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Catalogue Rittal

Uploaded by

Copyright:

Available Formats

2012 / 2013

Support arm connection Top Top, or bottom by rotating the enclosure

You might also like