Manual Usuario ZONE ALARM 9.1

ZoneAlarm security software
version 9
User Guide
August 24, 2009
2009 Check Point Software Technologies Ltd.
All rights reserved. This product and related documentation are protected by copyright and distributed under licensing restricting their
use, copying, distribution, and decompilation. No part of this product or related documentation may be reproduced in any form or by
any means without prior written authorization of Check Point. While every precaution has been taken in the preparation of this book,
Check Point assumes no responsibility for errors or omissions. This publication and features described herein are subject to change
without notice.
20032009 Check Point Software Technologies Ltd. All rights reserved.
Please refer to http://www.checkpoint.com/copyright.html for a list of our trademarks.
All other product names mentioned herein are trademarks or registered trademarks of their respective owners. The products described
in this document are protected by U.S. Patent No. 5,606,668, 5,835,726, 5,987,611, 6,496,935, 6,873,988, 6,850,943, and
7,165,076 and may be protected by other U.S. Patents, foreign patents, or pending applications.
User Guide for ZoneAlarm security software i
Contents
Welcome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ix
About this guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ix
Guide Conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ix
ZoneAlarm User Forum . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .x
ZoneAlarm Readme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .x
Chapter 1 ZoneAlarm security software basics. . . . . . . . . . . . . . . . . . . . . . . . . . 1
Tour of the ZoneAlarm control center . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Tour of main features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
About the Overview panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Viewing your protection statistics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
System tray icons and shortcut menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Responding to alerts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Firewall zone basics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Zones manage firewall security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Zones provide program control as outbound protection. . . . . . . . . . . . . . . . . . . . . 11
Configuration basics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Setting product preferences. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Setting product update options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Setting your password . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Backing up and restoring your ZoneAlarm settings . . . . . . . . . . . . . . . . . . . . . . . 15
Setting general product preferences . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Setting contact preferences . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Setting product display and proxy server options. . . . . . . . . . . . . . . . . . . . . . . . . 17
Creating an online fraud protection profile. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Licensing, registration, and support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
When your license expires. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Renewing your product license . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Accessing technical support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Updating your ZoneAlarm registration information. . . . . . . . . . . . . . . . . . . . . . . . 20
Updating and upgrading your product. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
About updating from a prior version . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Upgrading to another ZoneAlarm product . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Uninstalling ZoneAlarm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Moving to a different computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Chapter 2 Configuring for networks and resources . . . . . . . . . . . . . . . . . . . . 23
Configuring a new network connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Using the Network Configuration Wizard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
User Guide for ZoneAlarm security software ii
Disabling the Network Configuration Wizard. . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Using the Wireless Network Configuration Wizard . . . . . . . . . . . . . . . . . . . . . . . . 25
Disabling the Wireless Network Configuration Wizard. . . . . . . . . . . . . . . . . . . . . . 25
Integrating with network services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Enabling file and printer sharing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Connecting to network mail servers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Enabling Internet Connection Sharing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Configuring your VPN connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Supported VPN protocols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Configuring your VPN connection automatically . . . . . . . . . . . . . . . . . . . . . . . . . 28
Configuring your VPN connection manually . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Adding a VPN gateway and other resources to the Trusted Zone. . . . . . . . . . . . . . . 30
Removing a VPN gateway from a blocked range or subnet. . . . . . . . . . . . . . . . . . . 30
Allowing VPN protocols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Granting access permission to VPN software . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Chapter 3 Firewall protection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Understanding Firewall protection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Choosing security levels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Setting the security level for a Zone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Setting advanced security options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Setting gateway security options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Setting ICS (Internet Connection Sharing) options . . . . . . . . . . . . . . . . . . . . . . . 36
Setting general security options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Setting network security options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Setting wireless network security options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Managing traffic sources . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Viewing the traffic source list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Modifying traffic sources . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Adding to the Trusted Zone. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Adding to the Blocked Zone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Viewing logged Firewall events. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Blocking and unblocking ports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Default port permission settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Adding custom ports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Understanding expert firewall rules. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
How expert firewall rules are enforced. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Expert firewall rule enforcement rank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Creating expert firewall rules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Creating groups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Creating a location group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Creating a protocol group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Creating a day/time group. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Managing Expert Firewall Rules. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Viewing the Expert Rules list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Editing and re-ranking rules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
User Guide for ZoneAlarm security software iii
Chapter 4 Understanding and reducing alerts. . . . . . . . . . . . . . . . . . . . . . . . . . 59
About alerts and managing them. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Informational alerts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Firewall alerts/Protected. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
MailSafe alert. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Blocked Program alert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Internet Lock alert. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Remote alert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Program alerts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
New Program alert. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
Repeat Program alert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Changed Program alert. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Program Component alert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
Server Program alert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Advanced Program alert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
Automatic VPN Configuration alert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
Manual Action Required alert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
OSFirewall alerts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
Medium-rated Suspicious Behavior alert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
High-rated Suspicious Behavior alert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
Malicious behavior alert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
ID Lock alert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
New Network alerts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
Chapter 5 Program Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
Understanding Program Control. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
Setting program permissions automatically . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
Setting program permissions manually . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
Setting general program control options . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
Setting the program control level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
Custom program control features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
Configuring OSFirewall protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
Understanding services control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
Enabling Component Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
Setting the SmartDefense Advisor level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
Enabling the automatic lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
Viewing logged program events . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100
Viewing logged OSFirewall events. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
Setting permissions for specific programs . . . . . . . . . . . . . . . . . . . . . . . . 101
Using the programs list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102
Adding a program to the programs list. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105
Granting a program permission to access the Internet . . . . . . . . . . . . . . . . . . . . 106
Granting a program permission to act as a server . . . . . . . . . . . . . . . . . . . . . . . 106
Granting send mail permission to a program . . . . . . . . . . . . . . . . . . . . . . . . . . 107
Setting program options for a specific program . . . . . . . . . . . . . . . . . . . . 107
Setting Advanced Program Control options. . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
Disabling Outbound Mail protection for a program. . . . . . . . . . . . . . . . . . . . . . . 108
Setting Filter options for a program . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109
Setting authentication options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109
User Guide for ZoneAlarm security software iv
Setting passlock permission for a program. . . . . . . . . . . . . . . . . . . . . . . . . . . . 109
Managing program components. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110
Creating expert rules for programs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111
Creating an expert rule for a Program . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112
Sharing expert rules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112
Chapter 6 ZoneAlarm browser security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117
Using ZoneAlarm browser security. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117
Chapter 7 Virus and spyware protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120
Spyware and virus Protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120
Turning on virus and spyware protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121
Scheduling regular scans . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121
Keeping virus definitions up-to-date . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121
Customizing virus protection options . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122
Specifying scan targets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123
Choosing a scan mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124
Configuring on-access scanning. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125
Enabling automatic virus treatment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126
Specifying scan options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127
Excluding items from virus scans . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127
Performing a scan. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129
Understanding virus scan results . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130
Treating virus files manually . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131
Repairing files in an archive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 132
Submitting viruses and spyware to ZoneAlarm for review . . . . . . . . . . . . . . . . . . 132
Viewing logged virus events. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133
Viewing items in quarantine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134
Viewing virus and spyware protection status. . . . . . . . . . . . . . . . . . . . . . . 135
Monitoring virus protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136
Monitoring Coverage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136
Monitoring product status. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137
Monitoring antivirus status alerts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137
Enabling and disabling Anti-virus Monitoring . . . . . . . . . . . . . . . . . . . . . . . . . . 137
Viewing Status Messages in the Anti-virus Monitoring panel . . . . . . . . . . . . . . . . 137
Chapter 8 Parental Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 139
Using Parental Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 139
Working with parental controls and smart filtering. . . . . . . . . . . . . . . . . . . . . . . 139
Choosing which content categories to block . . . . . . . . . . . . . . . . . . . . . . . . . . . 141
Chapter 9 E-mail protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 147
Understanding e-mail protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 147
Outbound MailSafe protection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 148
Enabling Outbound MailSafe protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 148
Customizing Outbound MailSafe protection . . . . . . . . . . . . . . . . . . . . . . . 148
User Guide for ZoneAlarm security software v
Enabling Outbound MailSafe protection by program . . . . . . . . . . . . . . . . . . . . . 148
Setting Outbound MailSafe protection options . . . . . . . . . . . . . . . . . . . . . . . . . 149
Filtering junk e-mail (spam). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150
Allowing or blocking e-mail from specific senders . . . . . . . . . . . . . . . . . . . . . . . 151
Allowing or blocking e-mail from specific companies . . . . . . . . . . . . . . . . . . . . . 151
Adding contacts to the Allowed List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 151
Scanning your Inbox . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 151
Allowing e-mail from distribution lists. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152
Reporting junk e-mail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152
Reporting phishing e-mail. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 153
Specifying junk e-mail message options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 154
Challenging e-mail from unknown senders . . . . . . . . . . . . . . . . . . . . . . . . . . . . 155
Specifying your outbound e-mail server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 156
Customizing junk e-mail filter settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 156
Restoring e-mail incorrectly identified as junk . . . . . . . . . . . . . . . . . . . . . . . . . 158
Viewing junk e-mail filter reports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 158
Chapter 10 Identity protection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 160
Understanding the ID Lock feature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 160
How your personal information is protected . . . . . . . . . . . . . . . . . . . . . . . . . . . 161
Setting the ID Lock protection level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 162
About myVAULT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 163
Adding data to myVAULT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 163
Editing and removing myVAULT contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . 165
Using the Trusted Sites list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166
Viewing the Trusted Sites list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167
Adding to the Trusted Sites list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 168
Editing and removing trusted sites . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 168
Identity Protection Center . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 168
Chapter 11 Hard Drive Encryption for Laptops . . . . . . . . . . . . . . . . . . . . . . . . 172
Do I need Hard Drive Encryption for Laptops? . . . . . . . . . . . . . . . . . . . . . 172
Using Hard Drive Encryption for Laptops . . . . . . . . . . . . . . . . . . . . . . . . . 173
Installing Hard Drive Encryption for Laptops . . . . . . . . . . . . . . . . . . . . . . 174
Hard Drive Encryption Main panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 175
Creating your recovery disk . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 175
The Encryption Status bar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 176
Hard Drive Encryption Advanced panel. . . . . . . . . . . . . . . . . . . . . . . . . . . 176
Stopping or removing Hard Drive Encryption . . . . . . . . . . . . . . . . . . . . . . . . . . 177
Troubleshooting Hard Drive Encryption. . . . . . . . . . . . . . . . . . . . . . . . . . . 177
What to do if you forget your password or username: . . . . . . . . . . . . . . . . . . . . . 178
How to decrypt in case of system failure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 178
Chapter 12 Managing Alerts and Logs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 181
Understanding alerts and logs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 182
Setting basic alert and log options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 182
User Guide for ZoneAlarm security software vi
Setting the alert event level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 183
Setting event and program logging options. . . . . . . . . . . . . . . . . . . . . . . . . . . . 183
Controlling the number of alerts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 183
Showing or hiding firewall and program alerts . . . . . . . . . . . . . . . . . . . . . . . . . 184
Setting event and program log options . . . . . . . . . . . . . . . . . . . . . . . . . . . 184
Formatting log appearance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 184
Customizing event logging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 185
Customizing program logging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 185
Viewing log entries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 186
Viewing the text log . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 188
Archiving log entries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 190
Using SmartDefense Advisor and Hacker ID. . . . . . . . . . . . . . . . . . . . . . . 191
Chapter 13 Game Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 193
Understanding Game Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 193
Turning Game Mode On and Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 194
Appendix N Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 197
VPN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 197
Configuring ZoneAlarm security software for VPN traffic. . . . . . . . . . . . . . . . . . . 198
VPN auto-configuration and expert rules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 198
Automatic VPN detection delay . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 198
Networking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 199
Making your computer visible on your local network . . . . . . . . . . . . . . . . . . . . . 199
Sharing files and printers across a local network. . . . . . . . . . . . . . . . . . . . . . . . 199
Resolving a slow start up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 200
Internet Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 200
Connecting to the Internet fails after installation . . . . . . . . . . . . . . . . . . . . . . . 201
Allowing ISP Heartbeat messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 201
Connecting through an ICS client. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 202
Connecting through a proxy server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 202
Unable to connect to program advice server . . . . . . . . . . . . . . . . . . . . . . . . . . . 202
Anti-virus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 203
If a safe application has been quarantined. . . . . . . . . . . . . . . . . . . . . . . . . . . . 203
Anti-virus Monitoring alert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 204
Resolving conflicts with anti-virus products . . . . . . . . . . . . . . . . . . . . . . . . . . . 204
E-mail scanning is unavailable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 204
Hard Drive Encryption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 205
Third-party software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 205
Anti-virus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 206
Browsers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 206
Chat and instant messaging programs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 206
E-mail programs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 207
Internet answering machine programs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 207
File sharing programs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 207
FTP programs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 208
Games . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 208
Remote control programs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 209
User Guide for ZoneAlarm security software vii
VNC programs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 210
Streaming media programs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 210
Voice over IP programs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 211
Web conferencing programs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 211
Appendix O Keyboard shortcuts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 215
Navigation shortcuts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 215
Global function shortcuts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 216
Dialog box commands. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 217
Button shortcuts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 218
Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 222
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 234
User Guide for ZoneAlarm security software viii
User Guide for ZoneAlarm security software ix
Welcome
Welcome to ZoneAlarm, the easy-to-use Inter-
net security software that protects you from
known and unknown threats.
Quick Links:
Tour of main features
Troubleshooting
Topics:
About this guide, on page ix
About this guide
Throughout this guide all ZoneAlarm security software products are
collectively referred to as ZoneAlarm security software.
This online help documents all possible features in the ZoneAlarm
security software products, though not all features are in all products.
Guide Conventions
ZoneAlarm User Forum
ZoneAlarm Readme
Guide Conventions
This guide uses the following formatting and graphics conventions.
Convention Description
| Used to separate panel selections in procedures. Shows navigation
path.
Example: Select Firewall | Zones, then click Add.
Note icon. Emphasizes related, reinforcing, or important informa-
tion.
Welcome ZoneAlarm User Forum
User Guide for ZoneAlarm security software x
ZoneAlarm User Forum
Connect with other users of ZoneAlarm security software. Ask questions, get answers, and
see how fellow users get the most out of their ZoneAlarm security software. Visit: http://
www.zonealarm.com/security/en-us/community/user-forum-agreement.htm
ZoneAlarm Readme
System requirements and known issues and workarounds can be found in the Readme
document.
To open the Readme, from the Windows Start menu, choose Programs|
ZoneAlarm|Readme.
Caution icon. Indicates actions or processes that can potentially
damage data or programs.
Convention Description
Welcome ZoneAlarm Readme
User Guide for ZoneAlarm security software xi
Welcome ZoneAlarm Readme
User Guide for ZoneAlarm security software xii
Chapter
1
1
ZoneAlarm security software basics
ZoneAlarm is pre-configured to provide protection as soon
as you install it, and will alert you if it needs anything from
you. This chapter provides an introduction to the main
tools and concepts of ZoneAlarm security software.
Topics:
Tour of the ZoneAlarm control center, on page 1
Firewall zone basics, on page 10
Configuration basics, on page 12
Setting product preferences, on page 13
Licensing, registration, and support, on page 18
Updating and upgrading your product, on page 20
Uninstalling ZoneAlarm, on page 21
Moving to a different computer, on page 21
Tour of the ZoneAlarm control center
If ZoneAlarm security software is installed and running, there is nothing you need to
configure in order to start being protected it alerts you if it needs tell you or ask you
anything. When you want to explore the features and your options, the control center
provides one-stop access. The major features are presented in a menu on the left side of the
control center, and described in the section that follows.
About the Overview panel
Chapter 1: ZoneAlarm security software basics Tour of main features
User Guide for ZoneAlarm security software 2
Viewing your protection statistics
System tray icons and shortcut menus
To move from feature to feature, select the feature you want from the Navigation bar.
Features in the Navigation Bar
Each item you see in the Navigation bar represents a main feature in the product. Click
a feature to display all panels and subpanels for that feature.
Navigation bar: Click topics to
see panels or subpanels.
The features you see depend
on your version of the product.
Additional Services not
included in all versions. Get
them at zonealarm.com.
Some features listed below may not be included in your version of the product.
Chapter 1: ZoneAlarm security software basics Tour of main features
Navigation
item
Feature Description
Overview This panel tells you at a glance if your computer is secure. You can also
get a summary of protection activity and see if your product is up to
date, and access or download additional Web-based services like
backup and system tune-up (in some versions). For more details, see
About the Overview panel, on page 4.
Inbound Firewall Protects your computer from dangerous intrusions by guarding the
doors (network ports) to your computer.
The default settings defend you against unauthorized intrusions.
Advanced users can customize firewall configurations. For more infor-
mation, see Chapter 3,Firewall protection, starting on page 33.
Program Control Protects you against criminal programs that would send your personal
data over the Internet. Ensures that only programs you trust access the
Internet. Also, OS Firewall alerts you if programs try to perform suspi-
cious actions.
If ZoneAlarm does not recognize a program, it asks you what access you
want to give to it. For more information, see Chapter 5,Program
Control, starting on page 89.
Anti-virus and
Antispyware
Detects and treats malicious programs called viruses and spyware.
Checks your system against constantly updated databases of known
viruses and spyware. Detects virus or spy-like behaviors such as self-
modifying, self-replicating, data capturing, and port altering.
For more information, see Chapter 7,Virus and spyware
protection, starting on page 120.
Parental Controls The Parental Controls let you block Web sites containing undesired con-
tent. You can choose which categories to block, and use Smart Filtering
to instantly categorize and filter previously un-rated sites.
For more information, see Chapter 8,Parental Controls, starting on
page 139.
Browser Security ZoneAlarm ForceField protects your personal data, privacy, and your PC
while you are on the Web. You will see ForceField browser toolbar and
border around the edge of browser. Defends against drive-by downloads,
browser exploits, phishing, and spyware. Includes a Private Browser
option that leaves no trace behind on your computer.
See Using ZoneAlarm browser security, on page 117,
E-mail Protection Protects the people in your e-mail address book by halting outbound
email that displays virus-like activity. The Junk E-mail Filter removes
unwanted spam mail from your inbox, and can prevent identity theft by
deleting phishing email.
For more information, see Chapter 9,E-mail protection, starting on
page 147.
Table 1-1: Explanation of navigation bar features
Chapter 1: ZoneAlarm security software basics About the Overview panel
QuickTasks
The QuickTasks menu saves you steps by going directly to the window or dialog
relevant to the task.
Check for Updates makes sure that your product features and anti-virus/spyware
signature database are both up-to-date. If they are not up-to-date, the proper updates
are downloaded and installed automatically.
About Online Help
To go to the Help Center, which includes Tutorial and Troubleshooting links, click
Quick Tasks | Help | Help Center.
To get Help on the panel you are currently viewing choose Quick Tasks | Help |
About this Panel or press F1.
Related Topics:
The Overview panel tells you whether your security settings are enabled and provides a
summary of security activity.
From the Overview panel you can:
Identity
Protection
You can put your personal data into a virtual vault (called myVAULT)
to keep it safe from hackers and ID thieves. Then set Identity Lock to
Medium or High to protect your vault data. Some versions of the prod-
uct also include a button for signing up for offline identity protection.
For more information, see Chapter 10,Identity protection, starting on
page 160.
Hard Drive
Encryption
Locks your entire disk with special encryption so that laptop thieves
cannot access it. See Chapter 11,Hard Drive Encryption for
Laptops, starting on page 172. This panel only appears if you install
Hard Drive Encryption.
Alerts and Logs This panel helps you control how many pop-up alerts you see and which
alerts are logged.
For more information, see Chapter 12,Managing Alerts and
Logs, starting on page 181.
Navigation
item
Feature Description
Table 1-1: Explanation of navigation bar features
Chapter 1: ZoneAlarm security software basics Viewing your protection statistics
Confirm Protection: See at a glance if your computer is secured by all default
ZoneAlarm security software protections:
Green means all default protections are on.
Red means a default security feature is off. Click Fix It to turn it back on and
restore default settings.
Protection Statistics: Click See how or a green button to see how the product has
been protecting you, as described in Viewing your protection statistics, on page 5.
Additional Services: Access services, such as Identity Protection and online backup,
which are included in some versions of ZoneAlarm. (If you dont see these features
on the right side of the window, you can purchase them at www.zonealarm.com.)
Some Additional Services buttons guide you in installing the services first. After the
service is installed, just click the same Additional Services button to launch the
service.
To view statistics and details on how ZoneAlarm security software has been protecting
you do either of the follow:
Click one of the green buttons in the middle of the Overview panel
Click the See how... link above the green buttons
Depending on which version of ZoneAlarm security software you are running, the
Protection Details window displays the some or all of the following information:
Firewall Security
Depending on which version of ZoneAlarm security software you are running, this area
displays some or all of the following data:
Inbound Firewall: Shows you how many times the ZoneAlarm security software
firewall and has acted to protect you, and how many were high-rated alerts.
Outbound Firewall: Indicates how many programs have been secured for appropriate
access to the Internet.
When you purchase ZoneAlarm security software, you receive an automatic
product update subscription valid for one year, which means that when an updated
version of your product is released, your software notifies you and you can
download it instantly for free.
Your ZoneAlarm security software will keep you aware of the status of your
subscription. See also Renewing your product license, on page 19.
Chapter 1: ZoneAlarm security software basics Viewing your protection statistics
O/S Firewall: Indicates whether the Operating Firewall system is on and whether any
suspicious behaviors have been detected.
Anti-virus and Anti-spyware Security
Anti-virus/Anti-spyware Protection: Indicates whether your computer is protected
against malware and displays treatment statistics. If you are using a version of the
product that doesnt include this protection, you will see Anti-virus Monitoring status
instead.
Browser Security
Virtual Browsing Security: Shows how many Web browsing sessions have been secured
by ForceField.
Anti-phishing and Malware Protection: Displays number of dangerous sites detected
and number of Web downloads scanned.
Chapter 1: ZoneAlarm security software basics System tray icons and shortcut menus
The icons displayed in the system tray let you monitor your security status and Internet
activity as frequently as you wish, and access your security settings in just a few clicks
System tray icons
System tray shortcut menu
Right-click any of the system tray icons to access a shortcut menu.
Icon Description
ZoneAlarm security software is installed and running.
Your computer is sending (red band) or receiving (green band) network
traffic. This does not imply that you have a security problem, or that the
network traffic is dangerous.
ZoneAlarm security software is running a spyware and/or virus scan. For
details about scans, see Performing a scan, on page 129.
Game Mode is activated, causing ZoneAlarm security software to suppress
feature and anti-virus signature updates, scans, and most alerts. For
details about this feature, see Game Mode, on page 193.
ZoneAlarm security software is receiving an anti-virus signature update.
(Yellow lock) The Internet Lock is engaged.
(Red lock) Stop all Internet Activity is engaged. You may also begin to see
a lot of alerts.
Menu item Description
Open Browser Opens your Web browser, secured by ForceField protection.
Open Private
Browser
Opens your Web browser, secured by ForceField in Private Browser
mode. In this mode, no trace is left on your computer of what youve
typed in your browser or sites youve visited. See the ForceField online
Help (in the ForceField toolbar) for more information.
Open Unpro-
tected Browser
Opens your Web browser without ForceField protection.
Engage
Internet Lock
Engages the Internet Lock and displays the yellow lock icon in the sys-
tem tray. The Internet Lock stops all traffic except traffic initiated by
programs to which you have given pass-lock permission. Clicking the
Internet Lock instantly blocks DHCP messages or ISP heartbeats used
to maintain your Internet connection. As a result, you may lose your
Internet connection.
Table 1-2: System Tray Shortcut Menu
Chapter 1: ZoneAlarm security software basics Responding to alerts
Responding to alerts
When you first start using ZoneAlarm security software, it is not unusual to see a
number of alerts. Dont worry! This doesnt mean youre under attack. It just means that
ZoneAlarm security software is learning your program and network configurations, and
giving you the opportunity to set up your security the way you want it.
How you respond to an alert depends upon the type of alert displayed.
To understand the different types of alerts you see, and to find out what you can
do to see fewer of them, use Understanding and reducing alerts, on page 59.
Because New Program alerts and New Network and VPN alerts are the most common
alerts you may see, they are introduced here.
Stop All Internet
Traffic
Engages the Stop button and displays the red lock icon in the system
tray. All Internet traffic is blocked. You should click the Stop button
only if you believe your computer is under attack, otherwise, ZoneAlarm
security software may block legitimate programs that require access, as
well as DHCP (Dynamic Host Configuration Protocol) messages or ISP
heartbeat messages used to maintain your Internet connection.
Game Mode /
Stop Game Mode
Opens the dialog that controls Game Mode. When activated, Game
Mode suppresses ZoneAlarm updates, scans, and most alerts. You
choose whether to deny or allow all program and network permission
requests while Game Mode is active. For details about this feature, see
Chapter 13,Game Mode, starting on page 193.
Help Displays the Help Center, which includes Troubleshooting and a Tutorial
link.
View Scan Displays the Scanning Status dialog box, which tracks the progress of
spyware and virus scans and allows you to pause or cancel a scan.
Available only during scans.
About Displays version information for the ZoneAlarm security software you
have installed, including driver and engine information. If you are expe-
riencing problems with your software you can copy this information to
the clipboard and paste it into an e-mail to support.
Restore ...Control
Center
Displays the ZoneAlarm security software Control Center at full size
onscreen. The label for this menu option reflects the version of
ZoneAlarm security software you have installed.
Shutdown...Con-
trol Center
Closes the ZoneAlarm security software application. The label for this
menu option reflects the version of the ZoneAlarm security software you
have installed.
Menu item Description
Table 1-2: System Tray Shortcut Menu
Chapter 1: ZoneAlarm security software basics Responding to alerts
New Program alerts
The majority of the initial alerts you see will be New Program alerts. These alerts occur
when a program on your computer requests access or server permission to the Internet
or your local network. Use the New Program alert to give access permission to
programs that need itlike your browser and e-mail program.
Few programs or processes actually require server permission in order to function
properly.
Some processes, however, are used by Microsoft Windows to carry out legitimate
functions. Some of the more common ones you may see in alerts are: lsass.ex,
spoolsv.exe, svchost.exe, services.exe, winlogon.exe.
Be aware that many legitimate Windows processes, including those listed above, have
the potential to be used by hackers to disguise worms and viruses, or to provide
backdoor access to your system for Trojan horses. So, if you were not performing a
function (such as browsing files, logging onto a network, or downloading files) when the
alert appeared, then the safest approach is to deny server permission. If you do not
recognize the program or process that is asking for server permission, search the
Microsoft Support Web site (http://support.microsoft.com/) for information on the
process to determine what it is and what its used for.
At any time, you can assign permissions to specific programs and services from the
Programs List, accessed by selecting the Program Control|Programs panel.
To learn more about New Program alerts and how to respond to them and see fewer of
them, see New Program alert, on page 68.
New Network and VPN alerts
The other initial alerts you may see are the New Network alert and VPN Configuration
alerts. These occur when ZoneAlarm security software detects a network connection or
VPN connection. They help you configure your Trusted Zone, port/protocol
permission, and program permissions correctly so that you can work securely over your
network.
To learn more about these alerts and how to respond to them, see New Network
alerts, on page 83.
Use the check box labeled Remember this answer to give permanent permission
to programs you trust.
Chapter 1: ZoneAlarm security software basics Firewall zone basics
Firewall zone basics
ZoneAlarm security software keeps track of the good, the bad, and the unknown out on
the Internet by using virtual containers, called Zones, to classify the computers and
networks that connect to your computer.
The Internet Zone is the unknown. All the computers and networks in the world
belong to this Zoneuntil you move them to one of the other Zones.
The Trusted Zone is the good. It contains all the computers and networks you trust and
want to share resources withfor example, the other machines on your local or home
network.
The Blocked Zone is the bad. It contains computers and networks you distrust.
When another computer wants to communicate with your computer, ZoneAlarm
security software looks at the Zone it is in to help decide what to do.
To learn how to put a computer, network, or program in the Trusted Zone, see
Managing traffic sources, on page 39.
Zones manage firewall security
Zones provide program control as outbound protection
Zones manage firewall security
ZoneAlarm security software uses security levels to determine whether to allow or block
inbound traffic from each Zone. Use the Firewall panel to view and adjust security
levels.
High security setting
High security places your computer in stealth mode, making it invisible to hackers. High
security is the default configuration Internet Zone.
In High security, file and printer sharing is disabled; but outgoing DNS, outgoing
DHCP, and broadcast/multicast are allowed, so that you are able to browse the Internet.
All other ports on your computer are closed except when used by a program that has
access permission and/or server permission.
Medium security setting
Medium security places your computer in component learning mode, where ZoneAlarm
security software quickly learn the MD5 signatures of many frequently used program
components without interrupting your work with multiple alerts. Medium security is the
default setting for the Trusted Zone.
In Medium security, file and printer sharing is enabled, and all ports and protocols are
allowed. (If Medium security is applied to the Internet Zone, however, incoming
NetBIOS traffic is blocked. This protects your computer from possible attacks aimed at
your Windows networking services.) At Medium security, you are no longer in stealth
mode.
Chapter 1: ZoneAlarm security software basics Zones provide program control as outbound protection
We recommend that you use the Medium security setting for the first few days of
normal Internet use after installing ZoneAlarm security software. After a few days of
normal use, ZoneAlarm security software will have learned the signatures of the
majority of the components needed by your Internet-accessing programs, and will
remind you to raise the Program Authentication level to High.
No security level is necessary for the Blocked Zone, because no traffic to or from that
Zone is allowed.
Zones provide program control as outbound protection
Whenever a program requests access permission or server permission, it is trying to
communicate with a computer or network in a specific Zone. For each program you can
grant or deny the following permissions:
Access permission for the Trusted Zone.
Access permission for the Internet Zone.
Server permission for the Trusted Zone.
Server permission for the Internet Zone.
By granting access or server permission for the Trusted Zone, you enable a program to
communicate only with the computers and networks you have put in that Zone. This is
a highly secure strategy. Even if a program is tampered with, or given permission
accidentally, it can only communicate with a limited number of networks or computers.
By granting access or server permission for the Internet Zone, however, you enable a
program to communicate with any computer or network, anywhere.
Advanced users can customize high and medium security for each Zone by
blocking or opening specific ports. For more information, see Blocking and
unblocking ports, on page 43.
Advanced users can specify the ports and protocols a particular program can
use, the hosts it can access, and other details. For more information, see
Creating an expert rule for a Program, on page 112.
Chapter 1: ZoneAlarm security software basics Configuration basics
Configuration basics
The Configuration Wizard
Upon completing installation, the Configuration Wizard appears. The Configuration
Wizard assists you in setting the basic ZoneAlarm security software options. You can
use the Configuration Wizard to enable Anti-virus protection, join DefenseNet, and run
a security scan of your applications and programs that helps minimize unnecessary
program alerts later. The Configuration Wizard appears only after installation.
Configuring program Internet access permissions
While ZoneAlarm security software can automatically set permissions that specify
which programs can transmit information across your firewall, you have the option of
specifying these permissions for many of the most popular programs in the following
software categories:
Instant Messaging programs
Web browsers
Microsoft Office
E-mail
Anti-virus
Microsoft Windows processes
Document utilities
ZoneAlarm software applications
For more information about assigning permission to programs, see Setting
permissions for specific programs, on page 101.
Joining the DefenseNet community
ZoneAlarm security software users can help shape the future of ZoneAlarm security
products by joining the DefenseNet community protection network and periodically
sending anonymous configuration data to ZoneAlarm for analysis. By joining
DefenseNet, you can help us focus our attention on the features and services that you
use most often and to introduce new functionality that will provide even smarter
security.
Configuration data is not collected from ZoneAlarm or ZoneAlarm Anti-virus users.
Even with the Alert me before I make contact preference selected in the
Overview|Preferences panel, you will not be alerted before sending configuration
data to ZoneAlarm.
Chapter 1: ZoneAlarm security software basics Setting product preferences
The data collected is completely anonymous and is for ZoneAlarm internal use only and
will not be shared with others. Of the millions of ZoneAlarm security software users,
only a small percentage of users will have their information collected. The frequency of
data transmission depends upon the configuration of your computer. For most users,
data will be sent once per day.
To send configuration data to ZoneAlarm, do one of the following:
Select Yes, automatically and anonymously share my settings in the
Configuration Wizard that appears after installation.
Or, if you did not make this setting when the Configuration Wizard appeared, do this:
Select Overview|Preferences.
In the Contact with ZoneAlarm area, select Share my security settings
anonymously with ZoneAlarm.
Product preferences
See Setting product preferences, on page 13 to find out how to set or change your
ZoneAlarm security software password, log in or log out, manage product feature
updates (but not virus signature updates) and set general options for the display of the
ZoneAlarm security software Control Center.
Setting product preferences
Use the Preferences panel to set or change your ZoneAlarm security software password,
log in or log out, manage product feature updates (but not virus signature updates), set
general options for the display of the ZoneAlarm security software Control Center.
Setting product update options
Setting your password
Backing up and restoring your ZoneAlarm settings
Setting general product preferences
Setting contact preferences
Creating an online fraud protection profile
If you later decide that you do not want to send anonymous data, select
Overview|Preferences, in the Contact with ZoneAlarm area, then clear the Share
my settings anonymously... check box.
Chapter 1: ZoneAlarm security software basics Setting product update options
Setting product update options
When you purchase ZoneAlarm security software you receive a year of free updates to
your product, which means you can receive the bug fixes, new features, and
enhancements included in any updates to the product.
You can check for product updates manually, or set ZoneAlarm security software to
check automatically.
Tip: See http://download.zonealarm.com/bin/free/information/releaseHistories.html
to find out about enhancements and fixes included in any updates.
To set product update settings:
1. Select Overview|Preferences.
2. In the Check for Updates area, choose an update option.
To invoke a product check immediately, click Check for Update.
Setting your password
By setting a password, you prevent anyone but you from shutting down or uninstalling
ZoneAlarm security software, or changing your security settings. Setting a password will
not prevent other people from accessing the Internet from your computer.
If your version of ZoneAlarm security software was installed by an administrator with
an installation password, that administrator can access all functions.
When you set a password for the first time, be sure to log out before leaving your
computer. Otherwise, others can still change your settings.
To set or change a ZoneAlarm security software password:
2. Click Set Password.
3. Type your password and password verification in the fields provided.
4. Select Allow others to use programs without a password (unless the program
permission is set to Block) to allow others to use programs you havent explicitly
blocked, even if they dont have a password.
5. Click OK.
Product updates are different than virus signature updates. To control virus
signature updates, which happen automatically and in the background, see
Keeping virus definitions up-to-date, on page 121.
Automatically ZoneAlarm security software automatically notifies you when an
update is available. (Recommended)
Manually You monitor the Overview panel for updates.
Chapter 1: ZoneAlarm security software basics Backing up and restoring your ZoneAlarm settings
Once you have set a password, you must log in before you can change settings, shut
down the TrueVector security engine, or uninstall ZoneAlarm security software.
Backing up and restoring your ZoneAlarm settings
You can back up your existing settings to an XML file so that you can restore them later
or use the same settings on another computer, should you need to.
To back up your ZoneAlarm security settings
2. In the Backup and Restore Security Settings area, click Backup.
3. Type a file name or select an existing file to overwrite.
4. Click Save.
To restore your saved ZoneAlarm security settings
2. In the Backup and Restore Security Settings area, click Restore.
3. Select the XML file which contains the settings you want to use.
4. Click Open.
Setting general product preferences
By default, ZoneAlarm security software starts automatically when you turn on your
computer. Use the settings in the General area to change this and other options.
To set general display preferences:
Valid passwords are between 6 and 31 characters long. Valid characters include
A-Z, a-z, 0-9, and characters !,@,#,$,%,^,&,*.
The backup and restore feature should not be used to share settings among
different computers or to distribute security policies. To do so could cause an
extremely high number of alerts to appear due to differences among computers,
applications, and Windows processes.
Note that for technical support purposes a backup settings .xml file is
automatically created from time to time and placed in your Internet Logs folder.
Chapter 1: ZoneAlarm security software basics Setting contact preferences
2. In the General area, specify your preferences.
3. In the General area, click Options.
The Options dialog box appears.
4. In the Display settings area, choose your display preferences.
5. In the Proxy Configuration area, enter the IP address of your proxy server
information only if you are certain that it is necessary to do so.
Setting contact preferences
Setting contact preferences ensures that your privacy is protected when ZoneAlarm
security software communicates with ZoneAlarm (for example, to check automatically
for virus signature updates).
To set contact preferences:
2. In the Contact with ZoneAlarm area, specify your preferences.
Load ZoneAlarm security software
at startup
ZoneAlarm security software starts automatically
when you turn on your computer.
Remember the last panel vis-
ited
Opens ZoneAlarm security software to the panel that
you had open the last time you closed the Control Cen-
ter.
Color-scheme Allows you to change the default color scheme of the
Control Center.
ZoneAlarm security software automatically detects most proxy configurations,
such as those configured through Internet Explorer. making it unnecessary to
enter that information here. You should enter proxy information only if you have
an uncommon proxy configuration, such as a scripted proxy, and if some product
features such as anti-virus updates or instant messaging aren't working.
Alert me with a pop-up
before I make contact
Displays a warning before contacting ZoneAlarm to deliver
registration information, get product updates, research an
alert, or access DNS to look up IP addresses.
Note: There are certain situations in which you will not be
notified before contact is made. Those include sending
DefenseNet data to ZoneAlarm, contacting ZoneAlarm for
program advice, when an anti-virus update is performed, or
when monitoring your anti-virus status. The Share setting
anonymously... setting below, turns off the DefenseNet
transfer. All other settings can be disabled from the main
panel of their respective panels.
Chapter 1: ZoneAlarm security software basics Setting product display and proxy server options
Setting product display and proxy server options
You can use the Options dialog box to specify display setting options and proxy server
information.
To set product display and proxy options:
2. In the General area, click Options.
The Options dialog box appears.
3. In the Display settings area, specify your preferences.
4. Enter proxy server information, where necessary.
ZoneAlarm Security Software automatically detects most proxy configurations, such as
those configured through Internet Explorer, making it unnecessary to enter that
information here. You only need to enter your proxy information if you have an
uncommon proxy configuration, such as a scripted proxy, and if you find that some
product features such as anti-virus updates aren't working.
Creating an online fraud protection profile
If you are an eBay user, you can protect yourself against online fraud by storing your
online credentials in ZoneAlarm security software. ZoneAlarm security software
protects your profile by making sure it is only sent to authorized eBay destinations.
To create your online protection profile in ZoneAlarm and ZoneAlarm Anti-virus:
Hide my IP address when
applicable
Prevents your computer from being identified when you con-
tact ZoneAlarm, a Check Point Software Technologies, Inc.
Company.
Hide the last octet of my
IP address when applica-
ble
Omits the last section of your IP address (for example,
123.456.789.XXX) when you contact ZoneAlarm, a Check
Point Software Technologies, Inc. Company.
Share my security set-
tings anonymously with
ZoneAlarm
Periodically sends anonymous configuration data to
ZoneAlarm. For more information, see Joining the
DefenseNet community, on page 12.
Note: Configuration data is not collected from ZoneAlarm or
ZoneAlarm Anti-virus users.
Remember the last panel
visited
Opens ZoneAlarm security software to the most
recently viewed panel the next time you open the
Control Center.
Color-scheme Allows you to change the default color scheme of the
Control Center.
Chapter 1: ZoneAlarm security software basics Licensing, registration, and support
2. In the eBay Protection Profile area, click Password.
The Alliance Partner Password dialog displays.
3. Select eBay from the Alliance Partner drop-down list.
4. Type your eBay password into the password and confirm fields, then click OK.
To enter your eBay password:
1. Select ID Lock|myVAULT, then click Add.
The Add information to myVAULT dialog appears.
2. Type a description of the item, then select eBay password from the category drop-
down list.
3. Type your eBay password into the password and confirm fields, then click OK.
Asterisks will appear in place of the data you entered and an encrypted form of your
eBay password will be stored in myVAULT. The original information is not stored on
your computer.
4. Specify whether you want the information to be protected when using Web and E-
mail.
5. Click OK to save your changes.
For more information about how ZoneAlarm security software keeps passwords and
other personal data safe, see Chapter 10,Identity protection, starting on page 160.
Licensing, registration, and support
In order to receive support and updates for ZoneAlarm security software, you need a
valid license.
When your license expires
Renewing your product license
Updating your ZoneAlarm registration information
Accessing technical support
When your license expires
When you purchase a ZoneAlarm product, it is yours to use forever. With the purchase
you also receive one or more years of online technical support and free updates to your
version of the software. These updates include product updates as well as anti-virus/
antispyware signature updates, to keep you protected from new malware as it is
discovered.
ZoneAlarm security software basics Renewing your product license
Once the license expires, you can renew it to receive product updates and technical
support. If you do not renew your license, the product continues to work as it has been,
but is not updated to detect newly discovered malware.
To find out if your license key is still valid, click Overview | Product Info | Change
Lic. Your license key expiration date and time appear directly underneath the license
number.
Renewing your product license
When your license or trial expires, you will see messages that provide a button for
renewal. Or, you can renew by following the instructions below.
To renew a license:
1. Select Overview|Product Info.
2. In the Licensing Information area, click Renew.
You will be directed to a ZoneAlarm Web page where you can complete renewal.
If you have been using a trial or beta license key and have just purchased a full license,
you can enter the license key in the following manner.
To change your license key:
1. Under Quick Tasks, click Enter License Key.
2. In the dialog that appears, either type or copy and paste your license key, then click
OK.
Accessing technical support
From Overview panel, you can access to support resources, such as Frequently Ask
Questions, known issues, and how to contact support.
To access support resources:
Important: After you renew your license or enter a new license, click the Check
for Updates link on in the ZoneAlarm window. This completes your renewal.
If you need help finding your license key, or have any other problems with your
license key, please refer to http://www.zonealarm.com/support for assistance and
answers to common questions.
When you upgrade to a product with more features, the installation wizard helps
you preserve your previous ZoneAlarm security software settings if possible. In case
it is not possible, its a good idea to save your settings by using the Overview |
Preferences | Backup function before upgrading. After upgrading, use the
Overview | Preferences | Restore function to import your settings.
ZoneAlarm security software basics Updating your ZoneAlarm registration information
2. In the Support and Update Information area, click the click here link.
The Support Center Web site appears.
Updating your ZoneAlarm registration information
When you purchase ZoneAlarm security software, you are registered and can receive
security news from ZoneAlarm. If your information changes, you can update it.
To update your registration information:
2. In the Registration area, click Change Reg.
3. Enter your information in the fields provided.
To be notified of product news and updates, select the check box labeled Inform me
of important updates and news, then click OK.
Updating and upgrading your product
About updating from a prior version
When you purchase ZoneAlarm security software, you receive automatic product
updates for the length of the license you purchased, which means that when a new
version of your ZoneAlarm security software is released, your software notifies you and
you can download it instantly for free. You can also get the latest version by doing the
following:
1. Open ZoneAlarm.
2. Click Overview | Preferences
3. Click the Check for Update button.
When you update from a prior version, the installer program preserves your ZoneAlarm
settings when possible. In some cases, the installer may determine that you need to
perform Clean installation, which will not preserve your settings. However, you can save
your settings in either case by using the Overview | Preferences | Backup function
before updating. After updating, use the Overview | Preferences | Restore function
to import the .xml settings file you saved.
Upgrading to another ZoneAlarm product
To find out how you can upgrade to more features:
1. Open ZoneAlarm.
ZoneAlarm security software basics Uninstalling ZoneAlarm
2. Click the "Verify you are running all necessary protection on this computer link in
the lower middle of the window.
A window opens to guide you through product upgrade options.
Uninstalling ZoneAlarm
To uninstall your ZoneAlarm product:
1. From the Windows Start menu, choose All Programs | ZoneAlarm | Uninstall
ZoneAlarm Security.
2. Click the Uninstall button in the dialog that appears, and follow the onscreen
instructions.
Moving to a different computer
If you wish to move ZoneAlarm to a new machine, per the licensing agreement,
completely remove it from the existing machine, and then install it on the new machine.
Use the same license key that you used previously.
If you have a multi-user license, download a free trial version on each machine (from
http://www.zonealarm.com) or use your CD and the same license key on each machine.
Enter your ZoneAlarm license key on the new computer by clicking Enter License
Key under Quick Tasks in the ZoneAlarm window.
When upgrading to a new product with more features, its a good idea to save
your settings beforehand by using the Overview | Preferences | Backup function.
After upgrading, use the Overview | Preferences | Restore function to import the
.xml settings file you saved.
ZoneAlarm security software basics Moving to a different computer
Chapter
23
2
Configuring for networks and re-
sources
If youre on a home network, business Local Area Network
(LAN), or Virtual Private Network (VPN), or a wireless net-
work, you want to ensure smooth communication with the
network while still maintaining high security. The Network
Configuration Wizard, automatic VPN configuration, and
other features of ZoneAlarm security software help you to
quickly set up your network environment.
Topics:
Configuring a new network connection, on page 23
Integrating with network services, on page 26
Configuring your VPN connection, on page 27
Configuring a new network connection
If your computer connects to a network, you have to decide whether to place that network
in the Trusted Zone or in the Internet Zone.
Placing a network in the Trusted Zone enables you to share files, printers, and other
resources with other computers on that network. Networks you know and trust, such as
your home or business LAN and known protected wireless networks, should go in the
Trusted Zone.
Placing a network in the Internet Zone prevents you from sharing resources with other
computers on that network and protects you from the security risks associated with
Chapter 2: Configuring for networks and resources Using the Network Configuration Wizard
resource sharing. Unknown networks and most wireless networks, even secured wireless
networks, should go in the Internet Zone.
The Network Configuration Wizard helps you make this decision by determining
whether the detected LAN network is public or private. The Wireless Network
Configuration Wizard helps you make this decision by determining whether the
detected wireless network is secured or unsecured.
Using the Network Configuration Wizard
Using the Wireless Network Configuration Wizard
Disabling the Wireless Network Configuration Wizard
Using the Network Configuration Wizard
When your computer connects to a new network, ZoneAlarm security software opens
the Network Configuration Wizard, displaying the IP address of the detected network.
The IP address of the network is used to determine whether it is a private network or a
public network.
A private network is usually a home or business Local Area Network (LAN). Private
networks are placed in the Trusted Zone by default.
A public network is usually a much larger network, such as that associated with an ISP.
Public networks are placed in the Internet Zone by default.
To configure your network connection using the Network Configuration Wizard:
1. Choose the Zone you want this network in, then click Next.
2. Name the network. The name you enter here will be displayed in the Zones |
Inbound Firewall panel.
Disabling the Network Configuration Wizard
The Network Configuration Wizard is enabled by default. If you prefer to use the New
Network Alert to configure new networks, you can disable the Network Configuration
Wizard.
If you prefer not to use the Network Configuration Wizard, click Cancel in the
Wizard screen. A New Network alert will appear. The detected network will be
placed in the Internet Zone, even if it is a private network. For information on
using the New Network alert, see New Network alerts, on page 83.
Chapter 2: Configuring for networks and resources Using the Wireless Network Configuration Wizard
To disable the Network Configuration Wizard:
Using the Wireless Network Configuration Wizard
When your computer connects to a new wireless network, ZoneAlarm security software
opens the Wireless Network Configuration Wizard, then displays the IP address of the
detected network.
The WPA setting on the wireless access point is used to determine whether it is a secured
wireless network or an unsecured wireless network.
A secured wireless network is WPA enabled. WPA provides an initial barrier that can be
penetrated by hackers. In order to truly secure the network, the wireless access point
must have other features implemented, such as a limited access list or SSID (Service Set
Identifier) broadcast disabled. Only place wireless networks that you know have a higher
level of security and where you need to share resources or print in the Trusted Zone.
An unsecured wireless network may be completely unprotected and accessible by
anyone. Unsecured networks are placed in the Internet Zone by default.
To configure a wireless connection:
1. Choose the Zone you want this network in, then click Next.
2. Name the network.
The name you enter in the Configuration Wizard displays on the Zones | Inbound
Firewall panel.
Disabling the Wireless Network Configuration Wizard
The Network Configuration Wizard is enabled by default. If you prefer to use the New
Network Alert to configure new networks, you can disable the Network Configuration
Wizard.
In screen four of the Wizard, select the check box labeled Do not show
this Wizard the next time a new network is detected, then click Finish.
If you prefer not to use the Network Configuration Wizard, click Cancel in any
Wizard screen. A New Network alert will appear. The detected network will be
placed in the Internet Zone, even if it is a secured wireless network. For
information on using the New Network alert, see New Network alerts, on
page 83.
Chapter 2: Configuring for networks and resources Integrating with network services
To disable the Wireless Network Configuration Wizard:
Integrating with network services
If youre working on a home or business network, you may want to share files, network
printers, or other resources with other people on the network, or send and receive e-
mail through your networks mail servers. Use the instructions in this section to enable
safe resource sharing.
Enabling file and printer sharing
Connecting to network mail servers
Enabling Internet Connection Sharing
Enabling file and printer sharing
To share printers and files with other computers on your network, you will need to
configure ZoneAlarm security software to allow access to the computers with which
you plan to share resources.
To configure ZoneAlarm security software for file and printer sharing:
Add the network subnet (or, in a small network, the IP address of each computer youre
sharing with) to your Trusted Zone:
Go to the Firewall | Zones panel.
Under the Name column, find your home network (it may be the only listing), and
on that row right-click the word Internet under Zone and choose Trusted from
the pop-up menu.
In screen four of the Wizard, select the check box labeled Do not show
this Wizard the next time a new network is detected, then click Finish.
If the default Trusted Zone security level has been changed, reset it to Medium.
This allows trusted computers to access your shared files.
If the default Internet Zone security level has been changed, reset it to High.
This makes your computer invisible to non-trusted machines.
See Setting the security level for a Zone, on page 34.
Chapter 2: Configuring for networks and resources Connecting to network mail servers
Connecting to network mail servers
ZoneAlarm security software is configured to automatically work with Internet-based
mail servers using POP3 and IMAP4 protocols, when you give your e-mail client
permission to access the Internet.
Some mail servers, like Microsoft Exchange, include collaboration and synchronization
features that might require you to trust the server in order for those services to work.
To configure ZoneAlarm security software for mail servers with collaboration and
synchronization features:
1. Add the network subnet or IP address of the mail server to your Trusted Zone.
2. Set the Trusted Zone security level to Medium. This allows server collaboration
features to work.
3. Set Internet Zone security level to High. This makes your computer invisible to non-
trusted machines.
Enabling Internet Connection Sharing
If you are using Windows Internet Connection Sharing (ICS) option, or a third-party
connection sharing program, you can protect all of the computers that share the
connection from inbound threats by installing ZoneAlarm security software on the
gateway machine only. However, to receive outbound protection, or to see alerts on the
client machines, you must have ZoneAlarm security software installed on the client
machines as well.
Configuring your VPN connection
ZoneAlarm security software is compatible with many types of VPN client software and
can automatically configure the connection for certain VPN clients.
Supported VPN protocols
Configuring your VPN connection automatically
Configuring your VPN connection manually
Adding a VPN gateway and other resources to the Trusted Zone
Removing a VPN gateway from a blocked range or subnet
Before you configure ZoneAlarm security software, use your ICS software to set
up the gateway and client relationships. If you use hardware such as a router to
share your Internet connection rather than Microsofts Internet Connection
Sharing (ICS), ensure that the local subnet is in the Trusted Zone.
Chapter 2: Configuring for networks and resources Supported VPN protocols
Allowing VPN protocols
Granting access permission to VPN software
Supported VPN protocols
ZoneAlarm security software monitors the VPN protocols listed in the table below.
Configuring your VPN connection automatically
When VPN traffic is detected, an Automatic VPN Configuration alert is displayed.
Depending upon the type of VPN activity detected, and whether ZoneAlarm security
software was able to configure your VPN connection automatically, you may see one of
three Automatic VPN Configuration alerts.
For detailed information about the types of Automatic VPN Configuration alerts you
may see and how to respond to them, see Automatic VPN Configuration alert, on
page 74.
For instance, manual action may be required if the loopback adaptor or the IP address
of the VPN gateway falls within a range or subnet that you have blocked. For more
information, see Configuring your VPN connection manually, on page 29.
Networking Protocol Explanation and Comments
AH Authentication Header Protocol
ESP Encapsulating Security Payload protocol
GRE Generic Routing Encapsulation protocol
IKE Internet Key Exchange protocol
IPSec IP Security protocol.
L2TP Layer 2 Tunneling protocol. L2TP is a more secure varia-
tion of PPTP.
LDAP Lightweight Directory Access protocol
PPTP Point-to-Point Tunneling protocol
SKIP Simple Key Management for Internet Protocol
Table 2-1: Supported VPN protocols
If you have created an expert firewall rule that blocks VPN traffic, you will need
to modify the expert rule to allow VPN traffic. See Creating expert firewall
rules, on page 48.
Chapter 2: Configuring for networks and resources Configuring your VPN connection manually
Configuring your VPN connection manually
If your VPN connection cannot be configured automatically, ZoneAlarm security
software displays a Manual Action Required alert informing you of the manual changes
you need to make to configure your connection.
Refer to the following sections for manual configuration instructions:
Adding a VPN gateway and other resources to the Trusted Zone
If you have created an expert firewall rule that has blocked PPTP traffic and your
VPN software uses PPTP, you will need to modify the expert rule. See Creating
expert firewall rules, on page 48.
Chapter 2: Configuring for networks and resources Adding a VPN gateway and other resources to the
Adding a VPN gateway and other resources to the Trusted
Zone
In addition to the VPN gateway, There may be other VPN-related resources that need
to be in the Trusted Zone for your VPN to function properly.
See Adding to the Trusted Zone, on page 40, to learn how to add resources to your
computers Trusted Zone.
If the VPN gateway falls within a range or subnet that you have blocked, you must
manually unblock the range.
To unblock an IP range or subnet:
1. Select Firewall|Zones.
2. In the Zone column, select the blocked IP range or subnet.
3. Select Trusted from the shortcut menu, then click Apply.
To ensure proper configuration of your VPN software with ZoneAlarm security
software, you will need to modify your general security settings to allow VPN protocols.
To allow VPN protocols:
1. Select Firewall |Advanced.
Required Resources Other Resources
The resources below are required by all VPN
client computers and must be added to the
Trusted Zone.
The resources below may or may not be
required, depending on your specific VPN
implementation.
VPN Concentrator DNS servers
Remote host computers connected to the
VPN client (if not included in the subnet def-
initions for the corporate network)
Local host computers NIC loopback address
(depending on Windows version). If you
specify a local host loopback address of
127.0.0.1, do not run proxy software on the
local host.
Corporate Wide Area Network (WAN) subnets
that will be accessed by the VPN client com-
puter
Internet Gateway
Corporate LANs that will be accessed by the
VPN computer
Local subnets
Security servers (for example, RADIUS,ACE,
or TACACS servers)
Table 2-2: Required VPN-related network resources
Chapter 2: Configuring for networks and resources Granting access permission to VPN software
2. In the General settings area, select the check box labeled Allow VPN protocols.
3. Click OK.
Grant access permission to the VPN client and any other VPN-related programs.
To grant permission to your VPN program:
1. Select Program Control|Programs.
2. In the Programs column, select your VPN program.
3. In the Access column, click below Trusted, then select Allow from the shortcut
menu.
To grant access to VPN-related components:
1. Select Program Control|Components.
2. In the Components column, select the VPN component for which you want to grant
access.
3. In the Access column, select Allow from the shortcut menu.
If you are experiencing problems with your VPN connection, refer to the VPN
troubleshooting tips in Appendix 14,Troubleshooting, starting on page 197.
If your VPN program uses protocols other than GRE, ESP, and AH, also select the
check box labeled Allow uncommon protocols at high security.
If your VPN program is not listed, click Add to add it to the list.
Configuring for networks and resources Granting access permission to VPN software
Chapter
33
3
Firewall protection
Firewall protection is your front line of defense against In-
ternet threats. ZoneAlarm security softwares default Zones
and security levels give you immediate protection against
the vast majority of threats. If youre an advanced user,
custom port permissions and expert rules give you detailed
control of traffic based on source, destination, port, proto-
col, and other factors.
Topics:
Understanding Firewall protection, on page 33
Choosing security levels, on page 34
Setting advanced security options, on page 35
Managing traffic sources, on page 39
Blocking and unblocking ports, on page 43
Understanding expert firewall rules, on page 46
Creating expert firewall rules, on page 48
Creating groups, on page 50
Managing Expert Firewall Rules, on page 54
Understanding Firewall protection
In buildings, a firewall is a barrier that prevents a fire from spreading. In computers, the
concept is similar. There are a variety of fires out there on the Internethacker activity,
Chapter 3: Firewall protection Choosing security levels
viruses, worms, and so forth. A firewall is a system that stops these attempts to damage
your computer.
The ZoneAlarm security software firewall guards the doors to your computerthat
is, the ports through which Internet traffic comes in and goes out. ZoneAlarm security
software examines all the network traffic arriving at your computer, and asks these
questions:
What Zone did the traffic come from and what port is it addressed to?
Do the rules for that Zone allow traffic through that port?
Does the traffic violate any global rules?
Is the traffic authorized by a program on your computer (Program Control settings)?
The answers to these questions determine whether the traffic is allowed or blocked.
Choosing security levels
Setting advanced security options
Managing traffic sources
Blocking and unblocking ports
Understanding expert firewall rules
Choosing security levels
The default firewall security levels (High for the Internet Zone, Med. for the Trusted
Zone) protect you from hacker activity (such as a port scan), while enabling you to share
printers, files, and other resources with trusted computers on your local network. In
most cases, you dont have to make any adjustment to these defaults. Youre protected as
soon as ZoneAlarm security software is installed!
Setting the security level for a Zone
Setting the security level for a Zone
Security levels make it easy to configure your firewall settings. You can apply a
preconfigured security level (High, Medium, or Off) to each Zone, or you can specify
the port and protocol restrictions for each level. See Blocking and unblocking ports,
on page 43.
To set the security level for a Zone:
1. Select Firewall.
Chapter 3: Firewall protection Setting advanced security options
2. In the Internet Zone Security area, click the slider and drag it to the desired setting.
3. In the Trusted Zone Security area, click the slider and drag it to the desired area.
Advanced security options enable you to configure the firewall for a variety of special
situations, such as gateway enforcement and Internet Connection Sharing (ICS).
Setting gateway security options
Setting ICS (Internet Connection Sharing) options
Setting general security options
Setting network security options
High Your computer is in stealth mode, making it invisible to other computers.
Access to Windows NetBIOS (Network Basic Input/Output System) ser-
vices, file and printer shares is blocked.
Ports are blocked unless you have provided permission for a program to use
them.
Med Your computer is visible to other computers.
Access to Windows services, file and printer shares is allowed.
Program permissions are still enforced.
Off Your computer is visible to other computers.
High Your computer is in stealth mode, making it invisible to other computers.
Access to Windows (NetBIOS) services, file and printer shares is blocked.
Ports are blocked unless you have provided permission for a program to use
them.
Med Your computer is visible to other computers.
Off Your computer is visible to other computers.
Chapter 3: Firewall protection Setting gateway security options
Setting gateway security options
Some companies require their employees to use ZoneAlarm security software when
connecting to the Internet through their corporate game mode. When the
Automatically check the gateway... control is selected, ZoneAlarm security software
checks for any compatible gateways and confirms that it is installed so that gateways
requiring ZoneAlarm security software will grant access.
You can leave this option selected even if you are not connecting through a gateway.
Your Internet functions will not be affected.
Setting ICS (Internet Connection Sharing) options
If you are using ICS (Internet Connection Sharing), use these controls to configure
ZoneAlarm security software to recognize the ICS gateway and clients.
To set Internet Connection Sharing preferences:
1. Select Firewall.
2. Click Advanced.
3. In the Internet Connection Sharing area, choose your security settings.
4. Click OK.
Setting general security options
These controls apply global rules regarding certain protocols, packet types and other
forms of traffic (such as server traffic) to both the Trusted Zone and the Internet Zone.
This computer is not on an ICS/NAT
network
Internet Connection sharing is disabled.
This is a client of an ICS/NAT gateway
running ZoneAlarm security software
ZoneAlarm security software automatically
detects the IP address of the ICS gateway and
displays it in the Gateway Address field. You
also can type the IP address into the Gateway
address field.
Selecting Forward alerts from gateway to this
computer will log and display alerts on the cli-
ent computer that occur on the gateway.
This computer is an ICS/NAT gateway ZoneAlarm security software automatically
detects the IP address of the ICS gateway and
displays it in the Local Address field. You also
can type the IP address into the Gateway
address field.
Selecting Suppress alerts locally if forwarded
to clients, will suppress alerts forwarded from
the gateway to clients to also be displayed on
the gateway.
Chapter 3: Firewall protection Setting general security options
To modify general security settings:
1. Select Firewall.
2. Click Advanced.
3. In the General area, choose your security settings.
Click OK.
Block all fragments Blocks all incomplete (fragmented) IP data packets. Hack-
ers sometimes create fragmented packets to bypass or dis-
rupt network devices that read packet headers.
Caution: If you select this option, ZoneAlarm security soft-
ware will silently block all fragmented packets without
alerting you or creating a log entry. Do not select this
option unless you are aware of how your online connection
handles fragmented packets.
Block trusted servers Prevents all programs on your computer from acting as
servers to the Trusted Zone. Note that this setting over-
rides permissions granted in the Programs panel.
Block Internet servers Prevents all programs on your computer from acting as
servers to the Internet Zone. Note that this setting over-
rides permissions granted in the Programs panel.
Enable ARP protection Blocks all incoming ARP (Address Resolution Protocol)
requests except broadcast requests for the address of the
target computer. Also blocks all incoming ARP replies
except those in response to outgoing ARP requests.
Allow VPN Protocols Allows the use of VPN protocols (ESP, AH, GRE, SKIP)
even when High security is applied. With this option dis-
abled, these protocols are allowed only at Medium secu-
rity.
Allow uncommon protocols
at high security
Allows the use of protocols other than ESP, AH, GRE, and
SKIP, at High security.
Lock hosts file Prevents your computers hosts file from being modified by
hackers through sprayer or Trojan horses. Because some
legitimate programs need to modify your hosts file in order
to function, this option is turned off by default.
Disable Windows Firewall Detects and disables Windows Firewall. This option will
only appear if you are using Windows XP with Service Pack
2.
Filter IP over 1394 traffic Filters FireWire traffic. You will need to restart your PC for
these filter changes to take effect.
ZoneAlarm filters Internet Protocol version 6 (IPv6) traffic by default. When the
ZoneAlarm firewall is set to block IPv6, it also tells Windows not to use it, so you
will see IPv6 disabled in your network settings.
Chapter 3: Firewall protection Setting network security options
Setting network security options
Automatic network detection helps you configure your Trusted Zone easily so that
traditional local network activities such as file and printer sharing arent interrupted.
ZoneAlarm security software detects only networks that you are physically connected to.
Routed or virtual network connections are not detected.
You can have ZoneAlarm security software silently include every detected network in
the Trusted Zone; or ask you in each case whether to add a newly detected network.
To specify Network settings:
1. Select Firewall.
2. Click Advanced.
3. In the Network settings area, choose your security settings.
4. Click OK.
For more information about networking, see Chapter 2,Configuring for networks and
resources, starting on page 23.
Setting wireless network security options
Automatic wireless network detection helps you configure your Internet Zone to ensure
that you computer remains secure without being interrupted each time a new wireless
network is detected. ZoneAlarm security software detects only wireless networks that
your computer is connected to. (Networks that you are not actually connected to may
appear as available networks in your network neighborhood but the New Wireless
Network Configuration Wizard only appears when you connect establish a connection
to that network.)
You can have ZoneAlarm security software silently include every detected wireless
network in the Internet Zone.
Include networks in the Trusted
Zone upon detection
Automatically moves new networks into the
Trusted Zone. This setting provides the least secu-
rity.
Exclude networks from the Trusted
Zone upon detection
Automatically blocks new networks from being
added to the Trusted Zone and places them in the
Internet Zone. This setting provides the most
security.
Ask which Zone to place new net-
works in upon detection
ZoneAlarm security software displays a New Net-
work alert or the Network Configuration Wizard,
which give you the opportunity to specify the
Zone.
Automatically put new unprotected
wireless networks (WEP or WPA} in
the Internet Zone
Puts unsecured wireless networks into the Inter-
net Zone automatically, which prevents unautho-
rized access to your data from others accessing
the network.
Chapter 3: Firewall protection Managing traffic sources
To specify Network settings:
1. Select Firewall.
2. Click Advanced.
3. In the Wireless Network settings area, choose your security settings.
4. Click OK.
For more information about networking, see Chapter 2,Configuring for networks and
resources, starting on page 23.
Managing traffic sources
The Zones panel contains the traffic sources (computers, networks, or sites) you have
added to the Trusted Zone or Blocked Zone. It also contains any networks that
ZoneAlarm security software has detected. If you are using a single, non-networked PC,
the traffic source list displays only your ISPs (Internet Service Providers) network,
which should be in the Internet Zone.
Viewing the traffic source list
Modifying traffic sources
Adding to the Trusted Zone
Adding to the Blocked Zone
Viewing logged Firewall events
Viewing the traffic source list
The traffic source list displays the traffic sources and the Zones they belong to. You can
sort the list by any field by clicking the column header. The arrow ( ^ ) next to the
header name indicates the sort order. Click the same header again to reverse the sort
order.
Automatically put new unprotected
wireless networks (WEP or WPA) in
the Internet Zone
ZoneAlarm security software places new wireless
networks in the Internet Zone when they are
detected.
Field Description
Name The name you assigned to this computer,
site, or network
IP Address/Site The IP address or host name of the traffic
source
Table 3-1: Traffic source list fields
Chapter 3: Firewall protection Modifying traffic sources
Modifying traffic sources
From the traffic source list, you can move the traffic source from one Zone to another,
add, edit, or remove a traffic source.
To change the Zone of a traffic source:
2. Locate the traffic source, then click in the Zone column.
3. Select a Zone from the shortcut menu, then click Apply.
To add, remove, or edit a traffic source:
2. In the Name column, click the traffic source, then click Add, Edit, or Remove.
3. Click Apply.
Adding to the Trusted Zone
The Trusted Zone contains computers you trust want to share resources with. For
example, if you have three home PCs that are linked together in an Ethernet network,
you can put each individual computer or the entire network adapter subnet in the
Trusted Zone. The Trusted Zones default medium security settings enable you to safely
share files, printers, and other resources over the home network. Hackers are confined
to the Internet Zone, where high security settings keep you safe.
To add a single IP address:
2. Click Add, then select IP address from the shortcut menu.
The Add IP Address dialog appears.
3. Select Trusted from the Zone drop-down list.
4. Type the IP address and a description in the boxes provided, then click OK.
Entry Type The type of traffic source: Network, Host, IP,
Site, or Subnet
Zone The Zone the traffic source is assigned to:
Internet, Trusted, or Blocked
Field Description
Table 3-1: Traffic source list fields
Tip: The easiest way to add something to the Trusted Zone is to go to Alerts &
Logs | Log Viewer, see if the IP address, network, host, or site has shown up in
the logs. Right-click it and choose Add to Zone > Trusted.
Chapter 3: Firewall protection Adding to the Trusted Zone
To add an IP range:
2. Click Add, then select IP address from the shortcut menu.
The Add IP Range dialog appears.
4. Type the beginning IP address in the first field, and the ending IP address in the
second field.
5. Type a description in the field provided, then click OK.
To add a subnet:
2. Click Add, then select Subnet from the shortcut menu.
The Add Subnet dialog appears.
4. Type the IP address in the first field, and the Subnet mask in the second field.
5. Type a description in the field provided, then click OK.
To add to a Host or Site to the trusted Zone:
2. Click Add, then select Host/Site.
The Add Host/Site dialog appears.
3. Select Trusted from the Zones drop-down list.
4. Type the fully qualified host name in the Host name field.
5. Type a description of the host/site, then click OK.
To add a network to the Trusted Zone:
2. In the Zone column, click the row containing the network, then select Trusted from
the shortcut menu.
3. Click Apply.
ZoneAlarm security software automatically detects new network connections and
helps you add them to the right Zone. For more information, see Chapter
2,Configuring for networks and resources, starting on page 23.
Chapter 3: Firewall protection Adding to the Blocked Zone
Adding to the Blocked Zone
To add to the Blocked Zone, follow the instructions for adding to the Trusted Zone, but
select Blocked from the drop-down list in step 2.
Viewing logged Firewall events
By default, all Firewall events are recorded in the Log Viewer.
To view logged firewall events:
1. Select Alerts & Logs|Log Viewer.
2. Select Firewall, from the Alert Type drop-down list.
Table 5-2 provides an explanation the log viewer fields available for Firewall events.
Field Information
Rating Each alert is high-rated or medium-rated.
High-rated alerts are those likely to have
been caused by hacker activity. Medium-
rated alerts are likely to have been caused by
unwanted but harmless network traffic.
Date/Time The date and time the alert occurred.
Type The type of alert: Firewall, Program, ID Lock,
or Lock Enabled.
Protocol The communications protocol used by the
traffic that caused the alert.
Program The name of the program attempting to send
or receive data. (Applies only to Program and
ID Lock alerts).
Source IP The IP address of the computer that sent the
traffic that ZoneAlarm security software
blocked.
Destination IP The address of the computer the blocked
traffic was sent to.
Direction The direction of the blocked traffic. Incom-
ing means the traffic was sent to your com-
puter. Outgoing means the traffic was sent
from your computer.
Action Taken How the traffic was handled by ZoneAlarm
security software.
Count The number of times an alert of the same
type, with the same source, destination, and
protocol, occurred during a single session.
Source DNS The domain name of the sender of the traffic
that caused the alert.
Table 3-2: Firewall event log fields
Chapter 3: Firewall protection Blocking and unblocking ports
Blocking and unblocking ports
ZoneAlarm security softwares default security levels determine which ports and
protocols are allowed and which are blocked. If you are an advanced user, you can
change the definition of the security levels by changing port permissions and adding
custom ports.
Default port permission settings
Adding custom ports
Default port permission settings
The default configuration for High security blocks all inbound and outbound traffic
through ports not being used by programs you have given access or server permission
except:
DHCP broadcast/multicast
Outgoing DHCP (port 67) - on Windows 9x systems
Outgoing DNS (port 53) - If the computer is configured as an ICS gateway
Destination DNS The domain name of the intended addressee
of the traffic that caused the alert.
Field Information
Table 3-2: Firewall event log fields
Traffic Type
Security levels
HIGH MED OFF
DNS outgoing block n/a allow
DHCP outgoing block n/a allow
broadcast/multicast allow allow allow
ICMP
incoming (ping echo) block allow allow
incoming (other) block allow allow
outgoing (ping echo) block allow allow
outgoing (other) block allow allow
IGMP
Table 3-3: Default access permissions for incoming and outgoing traffic types
Chapter 3: Firewall protection Adding custom ports
To change a ports access permission:
1. Select Firewall.
2. In either the Internet Zone Security or the Trusted Zone Security area, click
Custom.
The Custom Firewall Settings dialog appears.
3. Scroll to locate High and Medium security settings.
4. To block or to allow a specific port or protocol, click the check box beside it.
5. Click Apply, then click OK.
Adding custom ports
You can allow communication through additional ports at High security, or block
additional ports at Medium security by specifying individual port numbers or port
ranges.
incoming block allow allow
outgoing block allow allow
NetBIOS
incoming n/a block allow
outgoing n/a allow allow
UDP (ports not in use by a permitted program)
TCP (ports not in use by a permitted program)
Traffic Type
Security levels
HIGH MED OFF
Table 3-3: Default access permissions for incoming and outgoing traffic types
Be aware that when you select a traffic type in the High security settings list, you
are choosing to ALLOW that traffic type to enter your computer under High
security, thus decreasing the protection of the High security level. Conversely,
when you select a traffic type in the Medium security settings list, you are
choosing to BLOCK that traffic type under Medium security, thus increasing the
protection of the Med security level.
Chapter 3: Firewall protection Adding custom ports
To specify additional ports:
1. Select Firewall.
2. In either the Trusted Zone or Internet Zone area, click Custom.
The Custom Firewall settings dialog appears.
3. Scroll to the security level (High or Medium) to which you want to add ports.
4. Select the desired port type: incoming UDP, outgoing UDP, incoming TCP, or
outgoing TCP.
5. Type the port or port ranges you want to allow or block in the Ports field, separated
by commas. For example, 139, 200-300
Select one of these
options, then specify
the port number in the
field that appears.
Chapter 3: Firewall protection Understanding expert firewall rules
Expert firewall rules are intended for users experienced with firewall security and
networking protocols.
Expert rules do not take the place of other rules. They are an integral part of the
multiple layer security approach and work in addition to other firewall rules.
Expert rules use four attributes to filter packets:
Source and/or destination IP address
Source and/or destination port number
Network protocol/message type
Day and Time
Source and destination addresses can be specified in a number of formats, including a
single IP network address, a range of IP addresses, a subnet description, a gateway
address, or a domain name.
Source and destination ports are used only for network protocols that use ports, such as
UDP and TCP/IP. ICMP and IGMP messages, for example, do not use the port
information.
Network protocols can be selected from a list of common IP or VPN protocols, or
specified as an IP protocol number. For ICMP, the message type can also be specified.
Day and Time ranges can be applied to a rule to restrict access based on the day of the
week and the time of day.
How expert firewall rules are enforced
Expert firewall rule enforcement rank
Creating expert firewall rules
Creating groups
Editing and re-ranking rules
How expert firewall rules are enforced
It is important to understand how expert rules are enforced in combination with Zone
rules, program permissions, and other expert rules.
Expert rules and Zone rules
Expert firewall rules are enforced before Zone firewall rules. That is, if a packet matches
an expert rule, that rule is enforced, and ZoneAlarm security software skips evaluation
of Zone rules.
Example: Imagine you have your Trusted Zone security level set to Medium. This allows
outgoing NetBIOS traffic. However, you have also created an expert rule that blocks all
Chapter 3: Firewall protection Expert firewall rule enforcement rank
NetBIOS traffic between the hours of 5PM and 7AM. Any outbound NetBIOS traffic
during those hours will be blocked, in spite of the Trusted Zone setting.
Expert firewall rules and program permissions
Expert rules and Zone rules together are enforced in tandem with Program
permissions. That is, if either your program permissions or Zone rules/expert firewall
rules determine that traffic should be blocked, it is blocked. Note that this means that
you can use firewall rules to override or redefine program permissions.
Expert firewall rule enforcement rank
Within the realm of firewall rules, rule evaluation order becomes a factor. ZoneAlarm
security software first checks expert firewall rules. If a match is found and a rule is
enforced, the communication is marked as either blocked or allowed, and ZoneAlarm
security software skips evaluation of Zone rules. If no expert firewall rule is matched,
ZoneAlarm security software checks Zone rules to see if the communication should be
blocked.
The enforcement rank of expert firewall rules is also important. Each rule has a unique
rank number, and rules are evaluated in order of rank. Only the first rule that matches is
executed. Consider these two
rules:
Figure 3-4: Expert firewall rule rank order
Rule 1 allows FTP clients in the Trusted Zone to connect to an FTP server on port 21.
Rule 2 blocks all FTP clients from connecting on port 21, regardless of Zone. These two
rules together allow clients in the Trusted Zone to use an FTP server on the client
computer, but block all other FTP access.
If the order of the rules were reversed, Rule 2 would match first, and all FTP access
would be blocked. Rule 1 would never have a chance to execute, so the FTP clients in
the Trusted Zone would still be blocked.
Note that packets coming from the Blocked Zone will not be blocked if they are
allowed by an Expert Firewall Rule.
Chapter 3: Firewall protection Creating expert firewall rules
Creating expert firewall rules involves specifying the source or destination of the
network traffic to which the rule applies, setting tracking options, and specifying the
action of the rule: whether to block or to allow traffic that meets the specifications of
the rule. You can create new rules from scratch, or you can copy an existing rule and
modify its properties.
To create a new expert firewall rule:
1. Select Firewall|Expert, then click Add.
The Add rule dialog appears.
2. In the General area, specify the rule settings.
3. In the Source area, select a location from the list, or click Modify, then select Add
location from the shortcut menu. You can add any number of sources to a rule.
Rank The order in which rules will be enforced. A rule with a rank of 1 is
enforced first.
Name Provide a descriptive name for the rule.
State Specify whether the rule is enabled or disabled.
Action Indicates whether to block or allow traffic that matches this rule.
Track Indicates whether to log, alert and log, or do nothing when the expert
rule is enforced.
Comments Optional field for entering notes about the expert rule.
My Computer Applies the expert rule to traffic originating on your computer.
Trusted Zone Applies the expert rule to network traffic from sources in your
Trusted Zone.
Internet Zone Applies the expert rule to network traffic from sources in your
Internet Zone.
All Applies the expert rule to network traffic coming from any source.
Host/Site Applies the expert rule to network traffic coming from specified
domain name.
IP Address Applies the expert rule to network traffic coming from specified IP
address.
IP Range Applies the expert rule to network traffic coming from a computer
within the specified IP range.
Subnet Applies the expert rule to network traffic coming from a computer
within the specified subnet.
Gateway Applies the expert rule to network traffic coming from a computer
on the specified gateway.
New Group
Choose this option, then click Add to create a new location group
to apply to the expert rule.
Chapter 3: Firewall protection Creating expert firewall rules
4. In the Destination area, select a location from the list, or click Modify, then select
Add location from the shortcut menu.
Available location types are the same for Source and Destination locations.
5. In the Protocol area, select a protocol from the list, or click Modify, then select Add
Protocol.
6. In the Time area, select a time from the list, or click Modify, then select Add Time.
7. Click OK.
To create a new rule from an existing rule:
1. Select Firewall|Expert.
2. Select the expert firewall rule you want to duplicate, then either press Ctrl+C or
right-click the rule and choose Copy.
3. Paste the copied rule either by pressing Ctrl+V, or by right-clicking and choosing
Paste.
4. Click Apply to save your changes.
Existing Group Choose this option to select one or more location groups to apply
to the expert rule, then click OK.
Add Protocol Choose this option to add a protocol to the rule. Specify: TCP, UDP,
TCP + UDP, ICMP, IGMP, or Custom and refer to Step 5 of Creating a
protocol group, on page 51 for help with this dialog.
New Group
Choose this option, then click Add to create a new protocol group to
apply to the expert rule. See Creating a protocol group, on page 51
for help with this dialog.
Existing Group Choose this option to select one or more protocol groups to apply to
the expert rule, then click OK.
Day/Time
Range
Choose this option to add a day/time range to the rule. Specify a
description, time range and one or more days. Time range is specified
using a 24 hour clock.
New Group
Choose this option, then click Add to create a new day/time group to
apply to the expert rule.
Existing Group Choose this option to select one or more day/time groups to apply to
the expert rule, then click OK.
If a rule is currently selected in the list, the pasted rule will be inserted above the
selected rule. If no rule is selected, the pasted rule will be inserted at the top of
the rules list.
A 1 is appended to the name of the copied rule. If you paste a rule a second
time, the number 2 is appended to the second rule copied.
Chapter 3: Firewall protection Creating groups
5. Right-click the new rule and choose Edit to modify the rule properties as necessary.
Creating groups
Use groups to simplify the management of locations, protocols, and days/times that you
use in your expert firewall rules.
Creating a location group
Creating a protocol group
Creating a day/time group
Creating a location group
Use location groups to combine non-contiguous IP addresses and ranges, or different
types of locations (for example, subnets and hosts), into an easily manageable set. You
can then easily add that set of locations to any expert firewall rule.
To create a location group:
1. Select Firewall|Expert, then click Groups.
The Group Manager dialog appears.
2. Select Locations, then click Add.
The Add Location Group dialog appears.
3. Specify the name and description of the location group, then click Add and select a
Location type from the menu.
Once created, the names of groups cannot be changed. For example, if you
create a Location Group named Home and subsequently decide to call the
group Work, you would need to remove the group called Home and create a
new group with the name Work.
Host/Site
A description and host name of the Host/Site location, then click OK.
Do not include http:// in the host name. Click Lookup to preview the
sites IP address.
IP Address A description and IP address of the IP Address location, then click
OK.
IP Range A description and beginning IP address and ending IP address of the
IP Range location, then click OK.
Subnet Specify a description, IP address, and Subnet Mask of the Subnet
location, then click OK.
Chapter 3: Firewall protection Creating a protocol group
4. Click OK to close the Group Manager dialog box.
Creating a protocol group
Create a protocol group to combine well-known TCP/UDP ports, protocols, and
protocol-specific message types (for example, ICMP message types), into sets that you
can easily add to expert rules. For example, you might create a group including POP3
and IMAP4 protocols in order to simplify the administration of your rules regarding e-
mail traffic.
To create a Protocol group:
2. Select Protocols, then click Add.
The Add Protocol Group dialog appears.
3. Specify the name and description of the Protocols group, then click Add.
The Add Protocol dialog appears.
4. Select a protocol type from the Protocol drop-down list
Gateway Specify an IP address, MAC Address, and description of the Gateway
location, then click OK.
Chapter 3: Firewall protection Creating a protocol group
5. Depending on the protocol type you chose, do one of the following:
If you chose TCP, UDP, or TCP/UDP, specify a destination, source and port
number.
If you chose ICMP in step 4, specify a description, message name, and type number.
Name Port number
FTP 21
Telnet 23
POP3 110
NNTP 119
NetBIOS Name 137
NetBIOS Datagram 138
NetBIOS Session 139
IMAP4 143
HTTPS 443
RTSP 554
Windows Media 1755
AOL 5190
Real Networks 7070
Other Specify port
number
FTP Data 20
TFTP 69
HTTP 80
DHCP 67
DHCP Client 68
SMTP 25
DNS 53
Message name Type number
Source Quench 4
Redirect 5
Alt 6
Echo Request 8
Router Advertisement 9
Router Solicitation 10
Time Exceeded 11
Parameter Problem 12
Chapter 3: Firewall protection Creating a day/time group
If you chose IGMP, specify a description, message name, and type number.
If you chose Custom, specify a description, protocol type, and protocol number.
6. Click OK, to close the Add Protocol dialog.
Creating a day/time group
To allow or block network traffic to or from your computer during specified periods of
time, you can create a day/time group and then add it to an expert rule. For example, to
block traffic coming from pop-up ad servers during business hours, you could create a
group that blocks HTTP traffic coming from a specified domain during the hours of 9
AM and 5 PM, Monday through Friday.
Timestamp 13
Timestamp reply 14
Information request 15
Information reply 16
Address Mask Request 17
Address Mask Reply 18
Traceroute 30
Other Specify type
number
Membership Query 17
Membership Report (ver 1) 18
Cisco Trace 21
Leave Group (ver 2) 23
Multicast Traceroute Response 30
Multicast Traceroute 31
Other Specify type
number.
RDP 27
GRE 47
ESP 50
AH 51
SKIP 57
Other Specify protocol number.
Chapter 3: Firewall protection Managing Expert Firewall Rules
To create a Day/Time group:
2. Select Times, then click Add.
The Add Time Group dialog appears.
3. Specify the name and description of the Time group, then click Add.
The Add Time dialog appears.
4. Specify a description of the time, then select a time and day range.
5. Click OK, then click OK to close the Group Manager.
Managing Expert Firewall Rules
From the Firewall | Expert panel, you can view the status of existing expert rules,
enable or disable rules, edit or remove rules, add new rules, change the order of rules,
and create groups.
Viewing the Expert Rules list
Chapter 3: Firewall protection Viewing the Expert Rules list
Viewing the Expert Rules list
The Expert Rules panel presents a list of all expert firewall rules. Rules are listed in order
of enforcement priority (rank). The arrow buttons on the right-hand side more selected
rules up and down the list, changing the enforcement order of the selected rules.
You also can change rank order of rules by dragging and dropping rules from one
position to another.
For example, dragging and dropping rule 2 to the top of the list changes the rank of that
rule to 1.
Figure 3-5: Expert Rules list
Rank
The enforcement priority of the rule. Rules are evaluated in order of rank, starting with
number 1, and the first rule that matches will be enforced. Disabled rules will display
Off instead of a rank number, but will retain their rank ordering in the list.
Action
A red means the rule will block network traffic; a green check mark means the
rule will allow network traffic.
Track
None means no notification when the rule is applied. Log ( ) means a log entry will be
created when the rule is applied. Alert and Log ( ) means that an alert will be
displayed and a log entry will be created when an expert rule is applied.
Name
A descriptive name for the rule.
Source
The source addresses and ports for the rule.
Rank
Click to add location, protocol, or
Tracking
Use controls to
change rule rank
Chapter 3: Firewall protection Editing and re-ranking rules
Destination
The destination addresses and ports for the rule.
Protocol
The network protocol to which the rule applies.
Time
The time period during which the rule is active.
You can edit or reorder existing expert rule from the Expert Rules list by selecting rules
and dragging them into the desired rank. Note that if you have copied an expert rule
into the rules for a Program, changing the expert rule does not automatically change the
Program rule. For more information, see Creating expert rules for programs, on
page 111.
To edit a rule:
2. Select the rule you want to edit, then click Edit.
The Edit Rule dialog appears.
3. Modify rule attributes as necessary, then click OK.
To change the rank of a rule:
2. Right-click the rule you want to move, then select Move Rule.
Move to Top Moves the selected rule to the top of the Rules list.
Move to Bottom Moves the selected rule to the bottom of the Rules list.
Move Up Moves the selected rule one row up in the Rules list.
Move Down Moves the selected rule one row down in the Rules list.
Firewall protection Editing and re-ranking rules
Firewall protection Editing and re-ranking rules
Chapter
59
4
Understanding and reducing alerts
There are many different types of security alerts that you
might see while ZoneAlarm security software is protecting
you. Here is where you find out why certain alerts happen,
what they mean, and what to do about them. You will also
find tips for reducing the number of alerts you see.
Note: For information about suppressing most alerts while
playing games on your computer, see Game Mode, on
page 193.
Topics:
About alerts and managing them, on page 59
Informational alerts, on page 60
Program alerts, on page 65
OSFirewall alerts, on page 75
ID Lock alert, on page 82
New Network alerts, on page 83
About alerts and managing them
ZoneAlarm security software alerts fall into three basic categories: informational, program,
and network. Additional alerts that may appear if the your version of the product includes
ID Lock alerts and OSFirewall alerts.
You can specify:
Chapter 4: Understanding and reducing alerts Informational alerts
Whether you want to be alerted to all security and program events, or if you only
want to be notified of events that are likely a result of hacker activity.
Whether you want to see all alerts or only High-rated alerts. (Although some Program
and ID Lock alerts cannot be suppressed as they need you to decide whether to grant
permission.)
You can also configure and monitor logs of alerts. For information about making any
of these general or log settings, see Managing Alerts and Logs, on page 181.
For details about what different types of alerts mean, how to respond to each one, and
how to reduce the occurrence of each type of alert, see:
Informational alerts, on page 60
Program alerts, on page 65
OSFirewall alerts, on page 75
ID Lock alert, on page 82
New Network alerts, on page 83
Informational alerts
Informational alerts tell you that ZoneAlarm security software has blocked a
communication that did not fit your security settings. They do not require a decision
from you.
Firewall alerts/Protected
MailSafe alert
Blocked Program alert
Internet Lock alert
Remote alert
Chapter 4: Understanding and reducing alerts Firewall alerts/Protected
Firewall alerts/Protected
Firewall alerts are the most common type of informational alert. Firewall alerts inform
you that the ZoneAlarm security software firewall has blocked traffic based on port and
protocol restrictions or other firewall rules.
Figure 4-1: Firewall alert
Why these alerts occur
Firewall alerts with a red band at the top indicate high-rated alerts. High-rated alerts
often occur as a result of hacker activity.
Firewall alerts with an orange band at the top indicate medium-rated alerts. Medium-
rated alerts are likely the result of harmless network traffic, for example, if your ISP is
using ping to verify that youre still connected. However, they also can be caused by a
hacker trying to find unprotected ports on your computer.
What you should do
Informational alerts dont require a decision from you. You can close the alert by
clicking OK at the bottom of the alert. By doing this you are not allowing any traffic to
access your computer.
The IP address of the computer that
sent the blocked packet, the protocol
that was used, and/or the port to
which the packet was addressed.
The date and time the alert
occurred.
The number of alerts that
have occurred since the alert
box opened. Use the arrow
controls to view the alerts.
28th of 74 alerts
Click More Info to submit
alert data to SmartDefense.
For quieter security, select this check
box before clicking OK.
Chapter 4: Understanding and reducing alerts MailSafe alert
How to see fewer of these alerts
If youre on a home or business network, and your Trusted Zone security is set to High,
normal LAN traffic such as NetBIOS broadcasts may generate firewall alerts. Try
lowering Trusted Zone security to Med.
By default, ZoneAlarm security software only displays high-rated firewall alerts. If your
defaults have been changed, you may see a lot of medium-rated alerts. Try setting your
alert display settings to medium.
If you are receiving a large number of firewall alerts, and you are working on a home
network or business LAN, it is possible that normal network communications are being
blocked. If this is happening, you can eliminate the alerts by placing your network in the
Trusted Zone.
Repeated alerts may indicate that a resource you want to trust is trying repeatedly to
contact you. If you are receiving a lot of firewall alerts, but you dont suspect youre
under attack, try the following troubleshooting steps:
Determine if the source of the alerts should be trusted.
Submit repeated alerts to SmartDefense Advisor to determine the source IP
address that caused the alerts.
If the alerts were caused by a source you want to trust, add it to the Trusted Zone.
Determine if your Internet Service Provider is sending you heartbeat messages.
Try the procedures suggested for managing ISP heartbeat. See Allowing ISP
Heartbeat messages, on page 201.
MailSafe alert
MailSafe alerts let you know that ZoneAlarm security software has quarantined a
potentially dangerous attachment to an e-mail message.
MailSafe alerts can occur due to violations of Outbound MailSafe protection settings. A
violation of Outbound MailSafe protection settings, such as an e-mail that has too many
recipients, or too many e-mails within a short time, can cause a MailSafe alert to occur.
What you should do
Chapter 4: Understanding and reducing alerts Blocked Program alert
If the alert was caused by an Outbound MailSafe violation, do the following:
Examine the alert carefully. Does the activity noted describe actions you were
recently performing? If so, you may want to modify your Outbound MailSafe settings
to better accommodate your needs. See Outbound MailSafe protection, on
page 148. If not, the alert may be the result of a virus on your computer. In this case
deny the outbound e-mails, then scan your computer with an anti-virus program.
Verify that your e-mail address is listed on the approved senders list. If you selected
the if the senders e-mail is not in this list option, and if your e-mail either is not
on that list or is misspelled, add your valid e-mail address to the list.
Outbound MailSafe Protection is an important part of your Internet security system,
and we recommend leaving it on. However, if you are getting a lot of these messages in
error, you may want to adjust the sensitivity of the feature or turn it off. See Outbound
MailSafe protection, on page 148.
Blocked Program alert
Blocked Program alerts tell you that ZoneAlarm security software has prevented an
application on your computer from accessing the Internet or Trusted Zone resources.
By clicking OK, youre not allowing the program access, just acknowledging that you
saw the alert.
Blocked Program alerts occur when a program tries to access the Internet or the
Trusted Zone, even though you have explicitly denied it permission to do so.
What you should do
If the program that was blocked is one that you want to have access to the Internet
Zone or Trusted Zone, use the Programs panel to give the program access permission.
Chapter 4: Understanding and reducing alerts Internet Lock alert
To turn off Blocked Program alerts, do either of the following:
When you see a Blocked Program alert, select Do not show this dialog again
before clicking OK. From then on, all Blocked Program alerts will be hidden. Note
that this will not affect New Program, Repeat Program, or Server Program alerts.
In the Program Control panel, click Advanced to access the Alerts & Functionality
panel, then clear the check box labeled Show alert when Internet access is denied.
Internet Lock alert
Internet Lock alerts let you know that ZoneAlarm security software has blocked
incoming or outgoing traffic because the Internet Lock (or the Stop button) is engaged.
By clicking OK, youre not opening the lock; youre just acknowledging that youve seen
the alert.
If the Internet Lock has been engaged automatically (or accidentally), open it to prevent
further alerts. See Firewall zone basics, on page 10.
These alerts occur only when the Internet Lock is engaged.
What you should do
Click OK to close the alert pop-up.
If the Internet Lock has been engaged automatically (or accidentally), open it to prevent
further alerts. See Firewall zone basics, on page 10.
You may want to give certain programs (for example, your browser) permission to
bypass the Internet Lock, so that you can continue to perform some basic functions
under the lock's higher security. See Setting passlock permission for a program, on
page 109.
If you are receiving a lot of Internet Lock alerts, it is possible that your Automatic
Internet Lock settings are engaging the Internet Lock after every brief period of
inactivity.
To reduce the number of alerts, you can do either of the following:
Turn off the Automatic Internet Lock.
Increase the interval of inactivity required to engage the Automatic Internet Lock to
engage. For more information, see Enabling the automatic lock, on page 98.
Turning off Blocked Program alerts does not affect your level of security.
Chapter 4: Understanding and reducing alerts Remote alert
Remote alert
Remote alerts are displayed on an ICS client machine when ZoneAlarm security
software blocked traffic at the ICS gateway. If you are not on a machine that is a client in
an ICS network, you will never see this alert.
Remote alerts occur when:
ZoneAlarm security software starts up on the ICS gateway. The alert displays the
message The remote firewall has started.
ZoneAlarm security software shuts down on the ICS gateway. The alert displays the
message The remote firewall has stopped.
The Internet Lock has engaged on the ICS gateway. This may prevent the client
machine from performing some tasks. The alert displays the message The remote
firewall has engaged the Internet Lock.
The Internet Lock is opened on the ICS gateway. The alert displays the message The
remote firewall has disengaged the Internet Lock.
What you should do
Click OK to close the alert box. You do not have to do anything else to ensure your
security.
If you do not want to see Remote alerts on the ICS client machine:
1. Select Firewall, then click Advanced.
2. In the Internet Connection Sharing area, clear the check box labeled Forward alerts
from gateway to this computer.
Program alerts
Program control, which generates program alerts, is the most important part of your
strong outbound protection system.
Most of the time, youre likely to see program alerts when youre using a program. For
example, if youve just installed ZoneAlarm security software, and you immediately
open Microsoft Outlook and try to send an e-mail message, youll get a program alert
asking if you want Outlook to have Internet access. However, program alerts can also
Chapter 4: Understanding and reducing alerts Program alerts
occur if a Trojan horse or worm on your computer is trying to spread, or if a program
on your computer is trying to modify your operating system.
Program alerts ask you if you want to allow a program to access the Internet or local
network, or to act as a server. The most common types of Program alerts are the New
Program alert and Repeat Program alert.
Figure 4-2: New Program alert
Some basics on responding to program alerts:
By clicking Allow, you grant permission to the program.
By clicking Deny, you deny permission to the program.
If SmartDefense Advisor is set to Auto, ZoneAlarm security software issues
Program alerts only if no automatic setting is available.
If you choose Remember this setting in a Program alert when allowing or denying
program access, ZoneAlarm security software keeps your setting unless
The name of the program that is
requesting permission.
The filename of the program that
requested permission, and the IP
address and port number of the
computer that the program is try-
ing to contact.
When available, this area dis-
plays program advice. If no
advice is available, click More
Info to submit alert data to
SmartDefense Advisor.
Select this check box before clicking Allow
or Deny to avoid seeing an alert for this pro-
gram again.
Chapter 4: Understanding and reducing alerts Program alerts
SmartDefense Advisor comes out with a different setting, or until you change the
setting manually in the Programs panel.
If you do not choose Remember this setting, ZoneAlarm security software will
issue another Program alert the next time the program attempts the same action.
See the topics below for more explanation and helpful tips about responding to and
reducing each kind of program alert.
How do you know which type of program alert you are seeing on your system?
Look at the name at the top of the program alert message.
New Program alert, on page 68
Repeat Program alert, on page 69
Changed Program alert, on page 69
Program Component alert, on page 70
Server Program alert, on page 71
Advanced Program alert, on page 73
Automatic VPN Configuration alert, on page 74
Manual Action Required alert, on page 74
Chapter 4: Understanding and reducing alerts New Program alert
New Program alert
New Program alerts enable you to set access permission for program that has not asked
for Internet Zone or Trusted Zone access before. If you click Allow, the program is
allowed access. If you click Deny, the program is denied access.
New Program alerts occur when a program on your computer tries to initiate a
connection with a computer in the Internet Zone or Trusted Zone, and that program
has not already received access permission from you or, if you have enabled it, from
SmartDefense Advisor.
As you begin to work with ZoneAlarm security software, you will probably see one or
more New Program Alerts.
What you should do
Click Allow or Deny in the alert pop-up after answering these questions:
Did you just launch a program or process that would reasonably require permission?
If so, its probably safe to click Allow. If not, continue.
Do you recognize the name of the program in the Alert pop-up? If so, does it make
sense for the program to need permission? If so, its probably safe to click Allow. If
not, or if youre not sure, continue.
Click the More Info button in the alert box. This submits your alert information (for
example, the name of the program and the address it was trying to reach) to
SmartDefense Advisor, which then displays a Web page with information about the
alert and the program. Use the SmartDefense Advisor information to help you
decide if its safe to answer Allow.
If youre really not sure what to do, its best to click Deny. You can always grant
permission later by going to the Programs panel. Setting permissions for specific
programs, on page 101.
It's normal to see several New Program alerts soon after installing ZoneAlarm security
software. As you assign permissions to each new program, the number of alerts you see
will decrease. To keep from seeing Repeat Program alerts, select Remember this
setting before clicking Allow or Deny.
If SmartDefense Advisor is set to Auto, ZoneAlarm security software issues Program
alerts only if no automatic setting is available. If you choose Remember this setting in
a Program alert when allowing or denying program access, ZoneAlarm security software
keeps your setting unless SmartDefense Advisor comes out with a different setting, or
until you change the setting manually in the Programs panel.
If your browser does not have permission to access the Internet, you will be re-
routed to this help file. To access SmartDefense Advisor, give your browser
permission to access the Internet.
Chapter 4: Understanding and reducing alerts Repeat Program alert
Repeat Program alert
Repeat Program alerts occur when a program on your computer tries to initiate a
connection with a computer in the Internet Zone or Trusted Zone, and that program
has asked for permission before.
If you respond Allow or Deny to a New Program alert without checking Remember
this answer, youll see a Repeat Program alert the next time the program asks for access
permission.
What you should do
You should respond to Repeat Program alerts in the same way you would to New
Program alerts. See New Program alert, on page 68.
To keep from seeing Repeat Program alerts, select Remember this setting before
clicking Allow or Deny in any New Program or Repeat Program alert. This sets the
permission for the program to Allow or Block in the Programs panel.
If SmartDefense Advisor is set to Auto, ZoneAlarm security software issues Program
alerts only if no automatic setting is available. If you choose Remember this setting in
a Program alert when allowing or denying program access, ZoneAlarm security software
keeps your setting unless SmartDefense Advisor comes out with a different setting, or
until you change the setting manually in the Programs panel.
Changed Program alert
Changed Program alerts warn you that a program that has asked for access permission
or server permission before has changed somehow. If you click Allow, the changed
program is allowed access. If you click Deny, the program is denied access.
Changed Program alerts can occur if you have updated a program since the last time it
accessed the Internet. However, they can also occur if a hacker has somehow managed
to tamper with the program.
Remember, some programs are configured to access the Internet regularly to look for
available updates. Consult the documentation for your programs, or refer to the support
Web sites of their vendors, to find out if they have automatic update functionality.
What you should do
To determine how to respond to a Changed Program alert, consider these questions:
Did you (or, if youre in a business environment, your systems administrator) recently
upgrade the program that is asking for permission?
Chapter 4: Understanding and reducing alerts Program Component alert
Does it make sense for the program to need permission?
If you can answer yes to both questions, its probably safe to click Allow.
Changed Program alerts are always displayed because they require a Allow or Deny
response from you. If you are using a program whose checksum changes frequently, you
can avoid seeing numerous alerts by having ZoneAlarm security software check the
programs file name only. Adding a program to the programs list, on page 105.
Program Component alert
Use the Program Component alert to allow or deny Internet access to a program that is
using one or more components that haven't yet been secured by ZoneAlarm security
software. This helps protect you from hackers who try to use altered or faked
components to get around your program control restrictions.
By clicking Allow, you allow the program to access the Internet while using the new or
changed components. By clicking Deny, you prevent the program from accessing the
Internet while using those components.
Program Component alerts occur when a program accessing the Internet or local
network is using one or more components that ZoneAlarm security software has not yet
secured, or that has changed since it was secured.
ZoneAlarm security software automatically secures the components that a program is
using at the time you grant it access permission. This prevents you from seeing a
Component alert for every component loaded by your browser. To learn how
ZoneAlarm security software secures program components, see Managing program
components, on page 110.
What you should do
The proper response to a Program Component alert depends on your situation.
Consider the following questions:
Are any of the following true?
You just installed or reinstalled ZoneAlarm security software.
You recently updated the application that is loading the component (For the
application name, look under Technical Information in the alert pop-up.)
The application that is loading the component has an automatic update function.
If you're not sure, it's safest to click Deny. You can always grant permission later
by going to the Programs panel. See Setting permissions for specific
Chapter 4: Understanding and reducing alerts Server Program alert
Someone else (for example, a systems administrator at your workplace) may have
updated a program on your computer without your knowledge.
Are you actively using the application that loaded the component?
If you can answer yes to both questions, it is likely that ZoneAlarm security software
has detected legitimate components that your browser or other programs need to use. It
is probably safe to answer Allow to the Program Component alert.
By clicking Allow, you allow the program to access the Internet while using the new or
changed components. If you cannot answer yes both questions, or if you feel unsure
about the component for any reason, it is safest to click Deny.
By clicking Deny, you prevent the program from accessing the Internet while using
those components.
You may receive a large number of component alerts if you raised the Program
Authentication level to high soon after installing ZoneAlarm security software. With
authentication set to High, ZoneAlarm security software cannot automatically secure
the large number of DLLs and other components commonly used by browsers and
other programs.
To reduce the number of alerts, lower the authentication level to medium for the first
few days after installing ZoneAlarm security software.
If you have been using ZoneAlarm security software for more than a few days, it is very
rare to see large numbers of program alerts.
Server Program alert
Server Program alerts enable you to set server permission for a program on your
computer.
Server Program alerts occur when a program on your computer wants server
permission for either the Internet Zone or Trusted Zone, and that program has not
already received server permission from you. A program is acting as a server when it is
open to receive connection requests from other computers. Several common types of
applications, such as chat and e-mail programs may need to act as servers to operate
If you're not sure what to do, or if you decide to click Deny, investigate the
component to determine if it is safe.
Chapter 4: Understanding and reducing alerts Server Program alert
properly. However, some hacker programs act as servers to receive for instructions from
their creators.
Relatively few programs on your computer will require server permission. Some
common types of programs that do are:
Chat
Internet Call Waiting
Music file sharing
Streaming Media (such as RealPlayer)
Voice-over-Internet
Web meeting
If you are using the types of programs described above that require server permission to
operate properly, grant permission before you start using the program. See Granting a
program permission to act as a server, on page 106.
What you should do
Before responding to the Server Program alert, consider the following:
Did you just launch a program or process that would reasonably require permission?
If so, its probably safe to click Allow. If not, continue.
Do you recognize the name of the program in the alert pop-up, and if so, does it
make sense for the program to need permission? If so, its probably safe to click
Allow.
Click the More Info button in the alert box. This submits your alert information (for
example, the name of the program and the address it was trying to reach) to
alert and the program. Use the SmartDefense Advisor information to help you
decide if its safe to answer Allow. For more information, see Using SmartDefense
Advisor and Hacker ID, on page 191.
If you are still not certain that the program is legitimate and needs server permission,
it is safest to click Deny. If it becomes necessary, you can give the program server
permission later by using the Programs panel. See Granting a program permission
to act as a server, on page 106.
If your browser does not have permission to access the Internet, you will be re-
routed to the online help. To access SmartDefense Advisor, give your browser
permission to access the Internet. See Granting a program permission to access
the Internet, on page 106.
Chapter 4: Understanding and reducing alerts Advanced Program alert
If you are using the types of programs described above that require server permission to
operate properly, use the Programs panel in ZoneAlarm security software to grant
permission before you start using the program. If youre seeing many server program
alerts, you may want to run an virus scan as an added precaution.
Advanced Program alert
Advanced Program alerts are similar to other Program alerts (New Program, Repeat
Program, and Changed Program)they inform you that a program is attempting to
access the network.
However, they differ from other Program alerts in that the program is attempting to use
another program to connect to the Internet, or is attempting to manipulate another
programs functionality.
Advanced Program alerts occur in two situations: when a program on your computer
tries to initiate a connection with a computer in the Internet Zone or Trusted Zone by
instructing another program to connect; or when a program attempts to hijack the
processes of another program by calling the OpenProcess function.
There are some legitimate programs associated with your operating system that may
require access to another program. For example, if you were using Windows Task
Manager to shutdown Internet Explorer, Windows Task Manager would need to call the
OpenProcess function on the Internet Explorer program in order to shut it down.
What you should do
How you should respond to an Advanced Program alert depends upon the cause of the
alert. If the Advanced Program alert was caused by the OpenProcess function being
called, you should determine whether the function was called by a legitimate program or
by a malicious one. Verify that the program cited in the alert is one you trust to carry out
this function. For example, if you were attempting to shut down a program using
Windows Task Manager when you received the Advanced Program alert, it is probably
safe to answer Allow. Similarly, if the alert was caused by a program using another
program to access the Internet and that program routinely requests such permission, is
probably safe to answer Allow. If you are unsure as to the cause of the alert or the
expected behavior of the program initiating the request, it is safest to click Deny. After
denying advanced permission to the program, perform an Internet search on the
programs file name. If the program is malicious, it is likely that information about it is
available, including how to remove it from your computer.
It is unusual to see a large number of Advanced Program alerts. If you receive repeated
alerts, research the program name or names and consider either removing the program
from your computer or providing the program with the necessary access rights.
Chapter 4: Understanding and reducing alerts Automatic VPN Configuration alert
Automatic VPN Configuration alert
Automatic VPN Configuration alerts occur when ZoneAlarm security software detects
VPN activity. Depending upon the type of VPN activity detected, and whether
ZoneAlarm security software was able to configure your VPN connection automatically,
you may see one of three Automatic VPN Configuration alerts.
Automatic VPN Configuration alerts occur when ZoneAlarm security software detects
VPN activity that it is not configured to allow.
What you should do
How you should respond to an Automatic VPN Configuration alert depends upon
which Automatic VPN Configuration alert you encounter, whether you are running
VPN software or not, and whether you want to configure ZoneAlarm security software
to allow your VPN connection.
If you are running VPN software on your computer and you want to configure the
connection, select either:
Configure ZoneAlarm security software to support this VPN connection, or
I am running VPN software and would like to configure ZoneAlarm security
software to support it
If are running VPN software but do not want ZoneAlarm security software to
configure your connection, select Do not configure ZoneAlarm security software
to support this VPN connection.
If you are not running VPN software, select I am not running VPN software.
If you are running VPN software, the only way to see fewer of these alerts is to properly
configure your ZoneAlarm security software to allow your VPN software and its
required resources. See Configuring your VPN connection manually, on page 29.
Manual Action Required alert
A Manual Action Required alert informs you that further steps must be taken before
ZoneAlarm security software is properly configured to support your VPN connection.
A Manual Action Required alert occurs when ZoneAlarm security software is unable to
configure your VPN connection automatically, or if further manual changes are required
before automatic configuration can be completed.
If you have created an expert firewall rule that blocks VPN traffic, you will need
to modify the expert rule to allow VPN traffic. See Creating expert firewall
rules, on page 48.
Chapter 4: Understanding and reducing alerts OSFirewall alerts
What you should do
Manual Action Required alerts do not require a response from you. To configure VPN
connection manually, see Configuring your VPN connection manually, on page 29
and follow the instructions for manual configuration.
It is unusual for you to see many Manual Action Required alerts. If you do see multiple
alerts, either perform the required steps to properly configure your ZoneAlarm security
software to support your VPN connection, or remove the VPN software from your
computer.
OSFirewall alerts
OSFirewall alerts are alerts that appear when programs or processes on your computer
are attempting to modify your computers settings or programs.
There are three types of OSFirewall alerts, two of which require a response from you:
Medium-rated Suspicious and High-rated Suspicious. Malicious alerts do not require a
response from you.
Medium-rated Suspicious Behavior alert
High-rated Suspicious Behavior alert
Malicious behavior alert
Medium-rated Suspicious Behavior alert
Medium-rated Suspicious Behavior alerts inform you that a trusted program is trying to
perform an action that may change the default behavior of a program. For example, if a
program were to modify your browsers home page, you would see a Medium-rated
Suspicious Behavior alert. If you click Allow, the program is allowed to perform the
activity. If you click Deny, the program is prevented from performing the activity and is
Chapter 4: Understanding and reducing alerts Medium-rated Suspicious Behavior alert
given Restricted access, which means that all future suspicious behavior will be denied.
Figure 4-3: Medium-rated Suspicious Behavior alert
Hackers often use trusted programs to modify other programs, such as your browser
settings or to compromise your computers operating system.
What you should do
Click Allow or Deny to respond. If you are not sure whether to allow or deny the
action, click the More Info button in the alert box. This submits your alert information
(for example, the name of the program and the activity it was trying to perform) to
alert and the behavior. Use the SmartDefense Advisor information to help you decide
whether to allow or deny the action.
The table below also provides some information you can use to determine how to
respond to Medium-rated Suspicious Behavior alerts when they appear. The
information listed here is for your reference only. Bear in mind that some legitimate
programs need to perform the actions listed below. Whether to allow or deny suspicious
program behavior should be determined by your individual situation. (Note that you can
A description of the detected
behavior.
The filename of the applica-
tion attempting the behavior.
Select this check box to allow or deny this
action in the future without alerting you.
alert data to SmartDefense
Advisor.
Chapter 4: Understanding and reducing alerts High-rated Suspicious Behavior alert
configure ZoneAlarm security software to prevent several of these behaviors
automatically. For details, see Configuring OSFirewall protection, on page 96.) .
High-rated Suspicious Behavior alert
A High-rated Suspicious Behavior alert informs you that a program on your computer is
attempting activity that could be dangerous.
Examples of such behaviors include:
attempts to access a disk without going through the file system. This behavior is used
by malicious software to get around file protection by changing raw data on your disk.
behavior that may cause programs or your operating system to stop functioning
normally
behaviors that indicates spyware is trying to monitor your activity
If you click Allow, the program is allowed to perform the activity. If you click Deny, the
program is prevented from performing the activity and is given Restricted, access which
means that all future suspicious behavior will be denied.
Detected Behavior What this means Considerations
Modifications of the startup
directory
A program is setting itself to
run each time your computer
is started.
Unless you are installing a
program, you should deny
this action, as it could be
spyware.
Modification of browser
search defaults
Your default browser search is
being modified.
Unless you are currently
modifying your browsers
search function, you should
deny this action.
Modification of browser page
defaults
Your default browser home
page is being modified.
Unless you are changing
your home page, you should
deny this action.
Unloading of driver A program is trying to trying
to unload another programs
driver.
There are no legitimate rea-
sons for this behavior. You
should deny this action.
Table 4-4: Medium-rated suspicious behavior guide
Selecting Remember this setting before clicking Allow or Deny causes
ZoneAlarm security software to remember your setting and apply it automatically
when the program attempts another similar action. If SmartDefense Advisor is
set to Auto, and you select Remember this setting in an OSFirewall alert, your
setting will remain effective unless SmartDefense Advisor comes out with a
different setting, or until you change the setting manually in the Programs panel.
Figure 4-5: High-rated Suspicious Behavior alert
These alerts occur when a program or component on your computer was detected
trying to hijack a process or program on your computer, to alter default settings on your
computer or one of its programs, or access a file without going through the standard
protected file system.
What you should do
Because of the nature of the actions that cause a High-rated Suspicious Behavior alert to
appear, its safest to click Deny in the alert pop-up. If youre not sure, click the More
Info button in the alert box. This submits your alert information (for example, the name
of the program and the activity it was trying to perform) to SmartDefense Advisor,
which then displays a Web page with information about the alert and the behavior. Use
the SmartDefense Advisor information to help you decide whether to allow or deny the
action.
Be aware, however, that some legitimate programs perform behavior of this kind as part
of normal program functioning. If you trust the program requesting permission, then it
may be safe to allow this behavior. In such cases, denying the behavior may result in
interrupted program activity.
The table below provides some information you can use to determine how to respond
to High-rated Suspicious Behavior alerts when they appear. The information listed here
A description of the detected
behavior.
The filename of the applica-
tion attempting the behavior.
Select this check box to allow or deny this
action in the future without alerting you.
Advisor.
is for your reference only. Bear in mind that few legitimate programs need to perform
the actions listed below.
Detected Behavior What this means Recommendation
Transmission of DDE
(Dynamic Data Exchange)
input
Program is trying to send
DDE input to another pro-
gram, which could allow the
program to gain Internet
access or to leak information.
This behavior is often used
to open URLs in Internet
Explorer. If the application
performing the behavior is
known and trusted, it is
probably safe to allow the
behavior. Otherwise, click
Deny.
Sending Windows messages A program is trying to send a
message to another program.
A program could be trying
to force the another pro-
gram to perform certain
functions. Unless you are
installing software that
needs to communicate with
another program, you
A program is trying to kill
another program.
A program is trying to termi-
nate another program
A program could be trying
to kill a trusted program.
Unless you have just used
Task Manager to end a pro-
gram or process, or have
just installed software that
requires a reboot of your
computer, you should deny
this action.
Invoking open process/thread A program is trying to control
another program. It is legiti-
mate for system applications
to do this.
Unless the program per-
forming the behavior is
trusted, you should deny
this action.
Monitoring keyboard and
mouse input
A program is attempting to
monitor your keyboard strokes
and mouse input.
Unless you are running a
specialized program that
needs to monitor this activ-
ity in order to function,
such as narration software,
you should deny this action.
Table 4-6: High-rated suspicious behavior guide
Remote control of keyboard
and mouse input
remotely control your key-
board and mouse.
Unless you are running
remote-access software,
such as PC Anywhere or
VNC, you should deny this
action.
Installation of driver A program is attempting to
load a driver. Loading a driver
allows a program to do any-
thing it wants on your com-
puter.
Unless you are installing
anti-virus, anti-spyware,
firewall, VPN, or other sys-
tem tools, you should deny
this action.
Modification of physical
memory
A program may be attempting
to modify or read information
owned by another program.
gaming, video, or system
utility software, you should
deny this action.
Injection of code into a pro-
gram or system service
inject code into another pro-
gram, which can be used to
disable the program or ser-
vice.
highly specialized software
to change the appearance
or behavior of a program,
you should deny this action.
Modifying network parame-
ters
change your network settings,
possibly to re-route you to
dangerous Web sites and
monitor your Web traffic.
TCP/IP tuning software, you
Launching an unknown or
bad program from a good one
modify another program.
Unless a program you are
using has a reason to open
another program (such as a
Word document with a link
to a browser, or an IM pro-
gram with links to other
programs) you should deny
this action.
Accessing system registry The process is trying to mod-
ify registry settings.
This behavior is usually
blocked automatically. If
you have program control
set to Manual mode, deny
this action.
Deletion of a run key A program was trying to
delete a run key entry.
If the program was set to
launch on start-up but was
cancelled, it will delete the
run key. In other cases, you
Chapter 4: Understanding and reducing alerts Malicious behavior alert
.
Malicious behavior alert
A Malicious Behavior alert informs you that a malicious program is attempting to run
on your computer. Programs that are designated by ZoneAlarm security experts tend to
be known worms, viruses, trojans, or other such malware.
These alerts inform you that a program on your computer will be killed (shut down).
What you should do
Malicious alerts do not require a response from you. They merely inform you of an
action that is taking place. If a trustworthy program is mistakenly killed, you can enable
the program from the Programs List.
Modification of ZoneAlarm
program
A program is trying to modify
the ZoneAlarm program, pos-
sibly to prevent it from run-
ning, or performing product
updates.
Unless you are upgrading
the ZoneAlarm client, deny
this action.
Chapter 4: Understanding and reducing alerts ID Lock alert
ID Lock alert
An ID Lock alert informs you that information stored in myVAULT is about to be sent
to a destination that is not on the Trusted Sites list.
If they have enabled the ID Lock feature, users may see ID Lock alerts if the personal
information stored in myVAULT is sent to a destination that is not listed on their
Trusted Sites list.
Figure 4-7: ID Lock alert
An ID lock alert occurs when information stored in myVAULT is either entered into a
Web page or e-mail message, or when your password is being sent to a destination in
clear text (unencrypted) form without your authorization.
What you should do
By clicking the Yes button, you grant permission to send the information to the
requesting IP address. If you do not want to be alerted the next time myVAULT data is
sent to this destination, select the Do you want to remember... check box to add the
destination to your Trusted Sites list.
You should determine whether the site requesting the information is one that you trust.
Whether you should allow or block the information depends upon the sensitivity of the
The description of the infor-
mation being sent.
This area displays the applica-
tion trying to send the infor-
mation and the IP address of
the computer its being sent
to.
Select this check box to add
this destination to your
Trusted Sites list.
Understanding and reducing alerts New Network alerts
information, the legitimacy of the request, and the authenticity of the site. If you are in
the process of making an online purchase with a trustworthy vendor when you see the
alert, its probably safe to let the information go through. If you see an alert requesting
your information when you are not performing such a transaction, its safest to block
the transmission.
Additionally, a few sites transmit passwords in clear text format. If you were to block
clear text passwords for a site, then visit that site and enter your password, you would
see an ID Lock alert.
You may see frequent ID lock alerts if you frequently submit myVAULT contents to
sites that you have not entered on the Trusted Sites list, or if you have blocked clear text
passwords for a site that uses clear text passwords. You can minimize the number of ID
Lock alerts by adding sites to the Trusted Sites list with which you frequently share your
personal information, and by allowing clear text passwords for those sites that use them.
New Network alerts
A New Network alert appears when ZoneAlarm security software detects that youre
connected to a network you havent seen beforebe it a wireless home network, a
business LAN, or your ISPs network. You can use the alert pop-up to enable file and
printer sharing with that network.
The first time you use ZoneAlarm security software, you will almost certainly see a New
Network alert. Dont worry! This alert is a convenience tool designed to help you
configure ZoneAlarm security software.
Figure 4-8: New Network alert
New Network alerts occur when you connect to any networkbe it a wireless home
network, a business LAN, or your ISPs network.
What you should do
How you respond to a New Network alert depends on your particular network
situation.
If you are connected to a home or business local network and you want to share
resources with the other computers on the network, put the network in the Trusted
Zone.
To add the new network to the Trusted Zone:
1. In the New Network alert pop-up, type a name for the network (for example Home
NW) in the Name box.
2. Select Trusted Zone from the Zone drop-down list.
The type of network (wireless or other),
IP address, and subnet mask of the
detected network.
Type a name of the network here. This
name appears in the Zones panel so that
you can recognize the network later.
Select the Zone in which to place the
new network. Put the network in the
Trusted Zone only if you know that it
is your home or business LAN and not
your ISP.
For more help configuring your net-
work, access the Network Configura-
tion Wizard.
Click OK to place the net-
work in the selected Zone and close
the alert box.
3. Click OK.
If you are connected to the Internet through a standard modem and dial-up connection,
a Digital Subscriber Line (DSL), or a cable modem, click OK in the New Network alert
pop-up.
It is unusual to receive a lot of New Network alerts.
If you are not certain what network ZoneAlarm security software has detected,
write down the IP address displayed in the alert box. Then consult your home
network documentation, systems administrator, or ISP to determine what
network it is.
Use caution if ZoneAlarm security software detects a wireless network. It is
possible for your wireless network adapter to pick up a network other than your
own. Be sure that the IP address displayed in the New Network alert is your
networks IP address before you add it to the Trusted Zone.
If you click Cancel, ZoneAlarm security software will block your Internet
connection. Do not add your ISP network to the Trusted Zone.
Chapter
89
5
Program Control
Program control and SmartDefense Advisor work together
to keep bad programs on your PC from accessing the Inter-
net while making sure that good programs have the access
they need. You can assign program control permissions
manually or let ZoneAlarm security software assign permis-
sions when program advice is available. Advanced users
can control the ports that each program is permitted to
use.
Topics:
Understanding Program Control, on page 89
Setting general program control options, on page 93
Setting permissions for specific programs, on page 101
Managing program components, on page 110
Creating expert rules for programs, on page 111
Understanding Program Control
Your outbound protection is called program control. Everything you do on the Internet
from browsing Web pages to downloading audio filesis managed by specific programs on
your computer. Hackers exploit this fact by planting malwaremalicious softwareon
your computer. Malware can masquerade as harmless e-mail attachments or as updates to
Chapter 5: Program Control Setting program permissions automatically
legitimate programs. Once on your computer, however, the malware can hijack trusted
programs and carry out malicious activities under the guise of legitimacy.
ZoneAlarm security software protects your computer from hackers and malicious
attacks by assigning policies to programs that indicate their level of trustworthiness and
specify the actions they are allowed to perform.
Some versions of ZoneAlarm security software include OSFirewall protection, which
detects when programs try to use your operating system to perform suspicious actions
on your computer.
The minimum you need to know about program control
By default, a programs permission to access the Internet is automatically determined
by SmartDefense Advisor.
Alerts appear if SmartDefense Advisor is unfamiliar with a program. (When the
unknown program wants access the Internet for the first time, a New Program alert
asks if you want to grant the access.)
If a program is trying to act as a server, a Server Program alert asks you if you want
to grant server permission. A program acts as a server when it is open to receive
connection requests from other computers. Though some applications, such as e-
mail programs, may need to act as servers to operate, hacker programs act as servers
to receive instructions from their creators. Be careful to give server permission only
to programs that you trust and that need server permission to operate.
To avoid seeing numerous alerts for the same program, select the Remember this
answer check box before clicking Yes or No in an alert. After that, the program will
be automatically blocked or allowed.
You can control the Internet and server permissions for specific programs by using
the Program Control panel or by allowing program control to ask you about each
program as it is activated.
Next topics:
Setting program permissions automatically
Setting program permissions manually
Setting program permissions automatically
The SmartDefense Advisor and Program Control settings work together to ensure that
good programs are given network access and that bad programs are denied access. By
default, Program Control is set to Medium and SmartDefense Advisor is set to Auto.
With these defaults, ZoneAlarm security software assigns permission to programs
Chapter 5: Program Control Setting program permissions manually
automatically. For information about customizing Program Control and SmartDefense
Advisor, see Setting general program control options, on page 93.
If SmartDefense Advisor and Program Control are set to their defaults, one of three
things may occur when a program requests access for the first time:
Access is granted - Access is granted if the program is known to be safe and requires
the permissions it is asking for in order to function properly.
Access is denied - Access is denied if the program is a known bad program or if the
program does not require the permissions it is asking for.
A New Program alert appears - Program alerts appear when you need to decide
whether to allow or deny Internet access to a program. The alert may contain a
recommendation about whether to allow or deny access, and, if necessary, you can
click More info to get details about the program to help you respond.
As long as SmartDefense Advisor is set to Auto, you see a program alert only if there
is no automatic setting available. If you choose Remember this setting in a Program
alert when allowing or denying program access, ZoneAlarm security software keeps
your setting unless SmartDefense Advisor comes out with a different setting, or until
you change the setting manually in the Programs panel. For more information about
different types of Program alerts, see Program alerts, on page 65
Safe programs
ZoneAlarm security software validates your programs against a database of known safe
programs and automatically assigns the permissions required for the programs to
function properly. If you accepted the default program settings in the Configuration
Wizard, ZoneAlarm security software is set up to automatically configure the most
popular programs in the following general categories:
Browsers (e.g., Internet Explorer, Netscape)
E-mail applications (e.g., Microsoft Outlook, Eudora)
Instant Messengers (e.g., AOL, Yahoo!)
Anti-virus (e.g., Symantec, ZoneAlarm)
Document utilities (e.g., WinZip
and Adobe
Acrobat
)
ZoneAlarm software applications
Even programs that are considered safe can be used by hackers to perform actions that
are not. OSFirewall protection displays alerts when it detects suspicious program
behavior. For more information about these alerts, see Program alerts, on page 65.
Setting program permissions manually
If you want to assign permissions to programs on your own, or if ZoneAlarm security
software was unable to assign permissions automatically, you can set permissions
Chapter 5: Program Control Setting program permissions manually
manually by using Program alerts, or by setting permissions for specific programs on
the Program Control | Programs panel.
Program alerts
When a program requests access for the first time, a New Program alert asks you if you
want to grant the program access permission. When a program is detected to be
listening to the ports on your computer, a Server Program alert is displayed.
Suspicious behavior alerts inform you that a trusted or unknown program on your
computer is trying to perform an action that could be considered suspicious.
To avoid seeing numerous alerts for the same program, select Remember this setting
before clicking Allow or Deny. ZoneAlarm security software will continue to apply your
Allow or Deny setting (without issuing alerts) unless you set SmartDefense Advisor to
Auto and it has a setting different from yours.
Because Trojan horses and other types of malware often need server rights in order to
do mischief, you should be particularly careful to give server permission only to
programs that you know and trust, and that need server permission to operate properly.
Several common types of applications, such as chat programs, e-mail clients, and
Internet Call Waiting programs, may need server permission to operate properly. Grant
server permission only to programs you're sure you trust, and that require it in order to
work.
If possible, avoid granting a program server permission for computers in your firewall
Internet Zone. If you need to accept incoming connections from only a small number
of machines, add those machines to your firewall Trusted Zone, and then allow the
program server permission for the Trusted Zone only.
For more information about program alerts, see Program alerts, on page 65.
Programs list
The Programs list allows you to set or customize permissions for specific programs
based on your individual needs. For more information about using the Programs list and
customizing permissions, see Using the programs list, on page 102.
You also can allow ZoneAlarm security software to automatically allow or deny all
new programs without displaying an alert. For example, if you are sure you have
given access permission to all the programs you want, you might automatically
deny access to any other program that asks for permission. For more information,
see Setting permissions for specific programs, on page 101.
Chapter 5: Program Control Setting general program control options
Setting general program control
options
When youre using ZoneAlarm security software, no program on your computer can
access the Internet or your local network, or act as a server, unless it has permission to
do so.
Setting the program control level
Custom program control features
Configuring OSFirewall protection
Enabling Component Control
Understanding services control
Setting the SmartDefense Advisor level
Enabling the automatic lock
Viewing logged program events
Setting the program control level
ZoneAlarm security software offers several methods of program control:
Basic program control lets you determine access and server rights for individual
programs.
The Custom Program Control Settings window provides several high-security
settings that are designed to prevent malicious programs from controlling trusted
programs. See Custom program control features, on page 95.
OSFirewall protection detects when programs try to use your operating system to
perform suspicious actions on your computer. For details on OSFirewall, see
Configuring OSFirewall protection, on page 96.
Understanding Auto-Learn
Auto is the default setting for the first 21 days of using ZoneAlarm security software.
ZoneAlarm security software observes and tracks which safe programs you use
regularly, so that you are not interrupted with alerts about these programs. After this
self-learning period, a message appears asking you whether you would like to continue
in Auto learning mode or move program control level to Max so that you have
maximum outbound protection.
To set the program control level:
1. Select Program Control.
Chapter 5: Program Control Setting the program control level
2. In the Program Control area, click the slider and drag it to the desired setting.
* Component control is disabled by default. If you have turned component control on, it will
remain enabled as long as program control is set to High, Medium, or Low. For informa-
Max (for ver-
sions with
Anti-virus)
High
(for versions
without Anti-
virus)
With this setting, you may see a large number of alerts.
Programs must ask for Internet access and server rights.
OSFirewall will monitor for suspicious behaviors, including attempts
to get around file system controls by accessing raw disk data.
Advanced Program control and Application Interaction Control are
enabled.
Service control manager is on if you have enabled it in the Custom
program control settings.
By default, component control is disabled.*
Auto
(for versions
with Anti-
virus)
This Auto-Learn mode minimizes alerts by recognizing your frequently
used programs and giving them network access without interrupting your
work with frequent alerts
This is the default level for the first 21 days. Most program alerts are
suppressed by giving access to programs you frequently use and
relying on SmartDefense Advisor to screen programs
The OSFirewall will also screen some programs.
Not as secure as the Max or High setting.
Medium
(for versions
without Anti-
virus)
This is the default setting.
Programs must ask for Internet access and server rights.
OSFirewall will monitor for suspicious behaviors.
Min
(for versions
with Anti-
virus)
OSFirewall is disabled.
Server control and stealth mode are available
Low
(for versions
without Anti-
virus)
OSFirewall is disabled.
Server control and stealth mode are not available
Off Program control is disabled.
No programs or components are authenticated or learned.
No program permissions are enforced.
All programs are allowed access/server rights.
All programs are allowed to perform suspicious behavior.
No program alerts are displayed.
Chapter 5: Program Control Custom program control features
tion about component control, including directions for turning it on, see Enabling Com-
ponent Control, on page 97.
To limit the number of alerts you see, you can use the following features:
Use the Auto program control level, which employs the Auto-Learn feature.
Leave SmartDefense Advisor on the Auto setting, to benefit from automatic
program settings.
Custom program control features
The Custom Program Control Settings window provides several high-security settings
that are designed to prevent malicious programs from controlling trusted programs.
1. Select Program Control, and then click the Custom button.
2. Specify the settings to apply.
Enable Advanced Program Control Prevents trusted programs from being used by
untrusted programs to circumvent outbound
firewall protection.
Enable Application Interaction Control Alerts you when a process attempts to use
another process or when a program launches
another program.
Enable Timing Attack Prevention Detects and stops programs that try to hijack
a trusted programs permissions (e.g., to load
drivers, change registry keys, or regulate pro-
cesses). Also known as handle protection. On
by default when Program Control is High or
Maximum.
Enable Microsoft Catalog Utilization When enabled, prevents alerts for programs
that are cataloged by Windows as known and
trustworthy. Enabled by default. (Depending
on your settings, ZoneAlarm may still alert
you about such programs if they attempt to
act as a server outside your Trusted Zone.)
Enable component control Restricts or monitors individual components,
such as DLL files or ActiveX controls, that
malware programs may use to access the net-
work. If program control is Medium, compo-
nent control tracks components but does not
restrict them. If program control is High, it
prompts you to allow or deny new compo-
nents. See Enabling Component Control,
on page 97 for details.
Chapter 5: Program Control Configuring OSFirewall protection
3. Click OK.
To learn about the settings on the OSFirewall panel of this dialog, see Configuring
OSFirewall protection, on page 96.
Configuring OSFirewall protection
OSFirewall protection, which is enabled by default, detects when programs try to use
your operating system to perform suspicious and potentially damaging actions on your
computer. You can also configure various OSFirewall Special System Protections, which
determine whether programs on your computer can perform specific actions such as
modifying your Internet Explorer home page or installing ActiveX controls.
See OSFirewall alerts, on page 75 for more details about the kinds of behaviors and
alerts that are associated with OSFirewall protection.
To configure OSFirewall settings:
2. In the Program Control area, click Custom.
3. In the dialog that appears, select the OSFirewall panel.
4. Select or deselect Enable OSFirewall, as desired. (To configure any OSFirewall
Special System Protections in the next step, you must first enable OSFirewall.)
5. Optionally, configure any OSFirewall Special System Protections. For any action in
the list, click the State field and select Allow, Deny, Ask, or Use Program Setting.
If you choose Use Program Setting, ZoneAlarm security software defers to
SmartDefense Advisor settings or to your manual settings.
6. Click Apply to save the setting and leave the dialog open, or OK to save the setting
and close the dialog.
Understanding services control
The services control feature catches dangerous program behaviors that other firewalls
have typically ignored. It controls changes to the Windows Services section of your
computers registry file, blocking attempts by untrusted programs to install or modify
Enable services control Alerts you if untrusted programs attempt to
install or modify a service or driver. Active
when Program Control is set to High or Maxi-
mum.
SeeUnderstanding services control, on
page 96 for more information.
Since some programs that control other programs are legitimate, ZoneAlarm
gives the most common ones permission to access the Internet. You can view
and adjust individual configurations on the Programs panel.
Chapter 5: Program Control Enabling Component Control
services or drivers. If such attempts occur, you are alerted and given the choice to allow
or deny them.
This protection:
prevents malware from being installed to start automatically when your computer
starts up
prevents drivers from being loaded into your PC kernel by rootkit malware
You can enable or disable services control in the Program Control Custom Settings
window, as described in Custom program control features, on page 95. Services
controls activates only when Program Control is set to High or Maximum.
Enabling Component Control
In addition to controlling permissions for all programs on a computer, advanced users may
also want to monitor and, if desired, restrict individual components that these programs
load (such as DLL files or ActiveX controls). ZoneAlarm security software keeps a list of
components (used by allowed programs) that have tried to access the Internet or the
local network. Depending on your program control and component control settings,
ZoneAlarm security software can simply monitor components or it can alert you each
time a new component attempts access. This section explains how to enable component
control. For details about viewing the Components List and modifying component
permissions manually, see Managing program components, on page 110.
By default, component control is turned off, though ZoneAlarm security software does
add components to the Components List. If you enable component control and set
program control to Medium, component control tracks components but does not
restrict their activity. If you then reset program control to High, component control
grants access to all previously known components but prompts you to allow or deny any
components discovered subsequently. For advanced users concerned about component
activity, the best practice is to install ZoneAlarm security software on a freshly set up
computer, enable component control and set the program control level to Medium, and,
after ZoneAlarm security software has had a chance to detect all normal components that
require access, reset program control to High. (For information about the program
control setting, see Setting the program control level, on page 93.)
To enable component control:
2. In the Program Control area, click Custom.
The Custom Program Control Settings dialog appears.
Another Windows component monitored by program control is Component Object
Model (COM). Drive-by downloads from websites may try to use COM to gain
access for taking data from your computer, but ZoneAlarm prevents this by
monitoring COM for suspicious behavior. This protection is always enabled.
Chapter 5: Program Control Setting the SmartDefense Advisor level
3. On the Program Control panel, select Enable component control.
4. Click OK.
Setting the SmartDefense Advisor level
Whenever you use a program that requests access, SmartDefense Advisor queries the
ZoneAlarm server to determine the policy for that program. You can choose to have
SmartDefense Advisor set the permissions for the program automatically, or you can
configure program access manually. The SmartDefense Advisor level is set to Auto by
default.
If you set SmartDefense Advisor to Auto and there is no advice available for a program,
ZoneAlarm security software displays a Program alert prompting you to allow or deny
access to the program. If you select Remember this setting when responding to such a
Program alert, ZoneAlarm security software keeps your setting unless SmartDefense
Advisor comes out with a different setting, or until you change the setting manually in
the Programs panel.
For information about setting program permissions manually, see Setting permissions
for specific programs, on page 101. You can set SmartDefense Advisor to Manual or
Off and set all program permissions manually. Or, you can set SmartDefense Advisor to
Auto and set manual program permissions only when SmartDefense Advisor does not
recommend a policy.
To set the SmartDefense Advisor level
2. In the SmartDefense Advisor area, choose your setting.
Enabling the automatic lock
The automatic Internet lock protects your computer if you leave it connected to the
Internet for long periods even when youre not actively using network or Internet
resources.
When the lock engages, only traffic initiated by programs to which you have given pass-
lock permission is allowed. All traffic to and from your computer is stopped, including
DHCP messages, or ISP heartbeats, used to maintain your Internet connection. As a
result, you may lose your Internet connection.
You can set the Internet lock to engage:
Auto In Auto mode, SmartDefense Advisor automatically implements the
recommendation returned from the server. Program Control must be
set to Medium or High to set SmartDefense Advisor to Auto.
Manual In Manual mode, you will receive Program alerts when programs
request access and can set the permission on your own.
Off SmartDefense Advisor will not contact the server for program advice.
Chapter 5: Program Control Enabling the automatic lock
When your screen saver engages, or
After a specified number of minutes of network inactivity.
To enable or disable the automatic lock:
2. In the Automatic Lock area, select On or Off.
To set automatic lock options:
2. In the Automatic Lock area, click Custom.
The Custom Lock Settings dialog appears.
3. Specify the lock mode to use.
4. If desired, specify Internet access permissions for periods when the lock is engaged.
5. Click OK.
Lock after n minutes of inactivity Engages automatic lock after the specified
number of minutes has passed. Specify a
value between 1 and 99.
Lock when screensaver activates Engages automatic lock whenever your
screensaver is activated.
Allow pass-lock programs to access the
Internet
Allows programs with pass-lock permission to
access the Internet. Programs without
pass-lock permission have no access. This is
the default behavior when the lock is
engaged.
Block all Internet access Prevents all programs, regardless of pass-lock
status, from accessing the Internet when the
lock is engaged.
Chapter 5: Program Control Viewing logged program events
Viewing logged program events
By default, all Program events are recorded in the Log Viewer.
To view logged program events:
2. Select Program, from the Alert Type drop-down list.
Table 5-1 provides an explanation of the log viewer fields available for Program events.
Field Explanation
Rating Event rating based on the Protection Level of the security
option.
Date/Time Date and time the event occurred.
Type Type of program alert that occurred. Possible values for this
column include:
Program Access
Repeat Program
New Program
Program The program (displayed as the application file) that requested
access. If a program name is unavailable, refer to the Descrip-
tion field of the Entry Details window.
Source IP The IP address of the computer sending the request. If the
source IP cannot be determined, this field may be left blank.
Destination IP The IP address of the computer receiving the request. If the
destination IP cannot be determined, this field may be left
blank.
Direction Specifies whether the request that caused the event was
incoming, outgoing, or occurred as a result of internal traffic
on your computer (data).
Action Taken Specifies whether the request was Allowed or Blocked. Action
is followed by /
Count The number of times this action was taken.
Source DNS The domain name server of the computer that is sending the
request.
Destination DNS The domain name server of the computer that is receiving the
request.
Table 5-1: Program event log fields
Chapter 5: Program Control Viewing logged OSFirewall events
Viewing logged OSFirewall events
By default, all OSFirewall events are recorded in the Log Viewer.
To view logged OSFirewall events:
2. Select OSFirewall, from the Alert Type drop-down list.
Table 5-2 provides an explanation of the log viewer fields available for OSFirewall
events.
Setting permissions for specific
programs
In some cases, you may want to specify different settings for an individual program than
the global program control level will allow. For example, if you wanted to allow access to
Field Explanation
Rating Event rating based on the Protection Level of the security option.
Date/Time Date and time the event occurred.
Type Type of OSFirewall alert that occurred. Possible values for this
column include:
Process
Message
Module
Registry
File
Execution
Driver
Physical memory
Subtype The specific event that initiated the Type of access requested
(for example, OpenThread would be a subtype of Process).
Data The path to the file that was attempting to be modified.
Program Displays the path to the program that performed the behavior.
Action Taken Specifies whether the request was Allowed or Blocked. Action is
followed by /manual or /auto to indicate whether the action was
performed by you or by SmartDefense Advisor.
Count The number of times this action was taken.
Table 5-2: OSFirewall event log fields
Chapter 5: Program Control Using the programs list
a particular program, but keep security High for all other programs, you could set the
permission for that program to Allow.
Using the programs list
Adding a program to the programs list
Granting a program permission to access the Internet
Granting a program permission to act as a server
Setting passlock permission for a program
Granting send mail permission to a program
Select Allow from the shortcut menu.
Using the programs list
The programs list provides an overview of the programs on your computer that have
tried to access the Internet or the local network. For each program, the program list
provides detailed information about its current state, trustworthiness, and the functions
it is allowed to perform. The programs list is organized in alphabetical order. You can
sort the programs in the list by any column by clicking on column header. As you use
your computer, ZoneAlarm security software detects every program that requests
network access and adds it to the programs list. To access the Programs List, select
Program Control|Programs.
Selecting a program name in the list displays program information in the yellow Entry
Detail area below the list. This area provides details about the program, including its full
name, the programs OSFirewall policy, and the date of the last policy update.
The SmartDefense Advisor and Trust Level columns indicate OSFirewall Protection for
your computer and specify whether a program is allowed to perform operating system-
After you manually set permissions for a program, the permissions for that
program will not change even if you later set the SmartDefense Advisor level to
Auto. To benefit from automatic program advice, remove the program from the
Programs List, then set the SmartDefense Advisor level to Auto.
level actions like changing TCP/IP parameters, loading or installing drivers, or changing
your browsers default settings.
Figure 5-3: Programs list
Active
Indicates the current status of a program. A green circle indicates that the program is
currently running.
Programs
The name of the program.
SmartDefense Advisor
The SmartDefense Advisor column indicates where the program policy comes from.
The column may contain any of the following designations:
AutoSmartDefense Advisor determines the program policy, unless a
recommendation is not available. (Note that, if SmartDefense Advisor is turned on,
and you select Remember this setting when responding to a Program alert, the
SmartDefense Advisor column will still say Auto, since the permissions will change
to conform to any SmartDefense Advisor recommendations that come out later.)
CustomYou determined the program policy manually. If you change a programs
permissions (by changing a value in any of the columns in the programs row, for
example), the SmartDefense Advisor column displays Custom for that program.
status indicator
SystemSmartDefense Advisor determines the program policy, and the program is
used by your operating system.
Trust Level
The Trust Level determines the actions that a program is allowed to perform. The Trust
Levels are Super, Trusted, Restricted, Ask, Kill, and No Enforcement.
A programs Trust Level setting is determined by its policy. ZoneAlarm security
software assigns policies to known programs automatically. The SmartDefense Advisor
security team constantly monitors programs for changes in behavior and
trustworthiness and updates the programs permissions accordingly. A program with a
Trust Level setting of Super today, might have a Trust Level of Restricted tomorrow, if
security experts determine that the program could pose a risk to your computer. If you
change a programs policy setting from Auto to Custom, however, it will no longer be
monitored for changes in Trust Level. For this reason, it is recommended that you keep
the default settings for your programs. Refer to the table below for a description the
symbols used in this list.
Access
The Access column refers to a programs right to retrieve information from the Internet
or networks in the Trusted Zone.
Server
Allows a program to passively listen for contact from the Internet or network. Few
programs require server rights.
Manually changing the policy for System programs could interfere with the
normal functions of your computer.
Chapter 5: Program Control Adding a program to the programs list
Send Mail
Allows a program to send and receive e-mail.
Refer to the table below for a description of the symbols used in this list.
For more information about what program actions are considered suspicious, see
OSFirewall alerts, on page 75.
Adding a program to the programs list
If you want to specify access or server permission for a program that does not appear
on the programs list, you can add the program to the list and then grant the appropriate
permissions.
Symbol Meaning
The program is currently active.
The program is allowed access/server rights.
When this symbol appears in the Access or Server
columns, it means that ZoneAlarm security soft-
ware will display a Program alert when the program
asks for access, server rights.
When this symbol appears in the Trust Level col-
umn, it means that ZoneAlarm security software
will display a Suspicious Behavior alert when a pro-
gram performs actions considered suspicious.
The program is denied access/server rights.
Super access. Program can perform suspicious
actions without seeking permission. No alerts will
be displayed.
Trusted access. Trusted Programs can perform sus-
picious actions without seeking permission, but
unknown programs must ask for permission.
Restricted access. Program can perform trusted-
level actions but cannot perform suspicious
actions.
No access. Programs marked with the No access
(Kill) symbol cannot run.
No enforcement. Program is not monitored at all
and can perform any action whatsoever. This set-
ting can pose a security risk.
Table 5-4: Program List symbols
Chapter 5: Program Control Granting a program permission to access the Internet
To add a program to the programs list:
1. Select Program Control|Programs, then click Add.
2. In the dialog that appears, locate the program you want to add, then click Open.
Be sure to select the programs executable file (for example, program.exe).
To edit a program on the programs list:
2. Right-click a program in the Programs column and choose one of the available
options.
Granting a program permission to access the Internet
Many of your most commonly used programs can be automatically configured for safe
Internet access. To determine whether a program was configured manually or
automatically, select the program in the Programs List and refer to the Policy field in the
Entry Details area.
To grant a program permission to access the Internet:
2. In the Programs column, click the program for which you want to grant access, then
select Allow from the shortcut menu.
For information about granting programs permission by responding to an alert, see
New Program alert, on page 68.
Granting a program permission to act as a server
Exercise caution when granting permission for programs to act as a server, as Trojan
horses and other types of malware often need server rights in order to do mischief.
Changes Fre-
quently
If this option is selected, ZoneAlarm security software will use only file
path information to authenticate the program. The MD5 signature will
not be checked.
Caution: This is a Low security setting.
Options Opens the Program Options dialog box, in which you can customize
security options and create expert rules for programs.
Properties Opens your operating systems properties dialog box for the program.
Remove Deletes the program from the list.
Built-in rules ensure a consistent security policy for each program. Programs
with access to the Internet Zone also have access to the Trusted Zone, and
programs with server permission in a Zone also have access permission for that
Zone. This is why (for example) selecting Allow under Trusted Zone/Server
automatically sets all of the programs other permissions to Allow.
Chapter 5: Program Control Granting send mail permission to a program
Permission to act as a server should be reserved for programs you know and trust, and
that need server permission to operate properly.
To grant a program permission to act as a server:
2. In the Programs column, click the program for which you want to grant server
access, then select Allow from the shortcut menu.
Granting send mail permission to a program
To enable your e-mail program to send e-mail messages and to enable protection against
e-mail threats, grant send mail permission to your e-mail program. For more
information about protecting your e-mail, see Chapter 9, E-mail protection, starting
on page 147.
To grant send mail permission to a program:
2. Select a program from the list, then click in the Send Mail column.
3. Select Allow from the shortcut menu.
Setting program options for a specific
program
How a program is authenticated, whether it uses Outbound MailSafe protection, or is
held to privacy standards, is determined globally by setting the Program Control level.
You can modify these and other settings on a per-program basis from the Programs
List.
Setting Advanced Program Control options
Disabling Outbound Mail protection for a program
Setting Filter options for a program
Setting authentication options
You also can access the Program Options dialog by right-clicking a program
name and selecting Options.
Chapter 5: Program Control Setting Advanced Program Control options
Setting Advanced Program Control options
Advanced Program Control tightens your security by preventing unknown programs
from using trusted programs to access the Internet, or preventing hackers from using
the Windows CreateProcess and OpenProcess functions to manipulate your computer.
To enable Advanced Program Control for a program:
2. In the Programs column, select a program, then click Options.
The Program Options dialog appears.
3. Select the Security panel, then choose your Advanced Program Control options.
4. Click OK.
Disabling Outbound Mail protection for a program
By default, Outbound Mail protection is enabled for all programs. Because the ability to
send e-mail is not a characteristic of all programs, you may choose to disable Outbound
Mail protection for any program that does not require it.
To disable Outbound Mail protection for a program:
2. Select a program from the list, then click Options.
3. Select the Security panel.
4. Clear the check box labeled Enable Outbound MailSafe Protection for this
program.
5. Click Apply to save your changes, then click OK.
For more information about Outbound MailSafe Protection, see Outbound MailSafe
protection, on page 148.
This program may use other pro-
grams to access the Internet
Allows the selected program to use other pro-
grams to access the Internet.
Allow Application Interaction Allows the selected program to use OpenProc-
ess and CreateProcess functions on your com-
puter.
This check box will not appear unless the SendMail permission for this program
is set to Allow.
Chapter 5: Program Control Setting Filter options for a program
Setting Filter options for a program
When Parental Control features are enabled globally, individual programs like Word
Processing programs can still access restricted content unless filter options have also
been enabled for that program. For example, although Parental Control blocks access to
the site http://www.playboy.com from your browser, the site could still be accessed
by clicking a URL within a Microsoft Word document unless Parental Control was also
enabled for that program.
To enable filter options for a program:
4. Under Filter Options, select the check box beside the protection you want, then click
OK.
For more information about Parental Control, see Chapter 8, Parental
Controls, starting on page 139.
Setting authentication options
You can specify whether a program is authenticated by using its full pathname or by its
components. By default, all programs are authenticated by their components.
To specify an authentication method:
4. Under Authentication, select the check box beside the option you want, then click
OK.
When the Internet Lock is engaged, programs given passlock permission can continue
to access the Internet. If you grant passlock permission to a program, and that program
uses other applications to perform its functions (for example, services.exe), be sure to
give those other programs passlock permission as well.
To grant or revoke passlock permission:
Chapter 5: Program Control Managing program components
3. Select the Enable Pass Lock check box.
Managing program components
In addition to controlling permissions for all programs on a computer, advanced users may
also want to monitor and, if desired, restrict individual components that these programs
load (such as DLL files or ActiveX controls). ZoneAlarm security software keeps a list of
components (used by allowed programs) that have tried to access the Internet or the
local network. Depending on your program control and component control settings,
ZoneAlarm security software can simply monitor components or it can alert you each
time a new component attempts access. This section explains how to access the
Components List and how to change component permissions. For details about enabling
component control, see Enabling Component Control, on page 97.
The Components List contains a list of program components for allowed programs that
have tried to access the Internet or the local network. The Access column indicates
whether the component is always allowed access, or whether ZoneAlarm security
software should alert you when that component requests access. By default, the
Chapter 5: Program Control Creating expert rules for programs
Components List is organized in alphabetical order, but you can sort the components in
the list by any column by clicking on the Component column header.
To access the Components List:
Figure 5-5: Components List
To grant access permission to a program component:
1. Select Program Control|Components.
2. Select a component from the list, then click in the Access column.
3. Select Allow from the shortcut menu.
Creating expert rules for programs
By default, programs given access permission or server permission can use any port or
protocol, and contact any IP address or host at any time. Conversely, programs that you
block have no access rights at all. By creating expert rules for particular programs, you
can heighten protection against hijacked programs by specifying ports and protocols,
source and destination addresses, and time and day ranges during which activity is either
allowed or denied. You can also apply tracking options to specific types of traffic in
Select Program Control | Components.
Chapter 5: Program Control Creating an expert rule for a Program
order to see alerts or generate log entries when allowed program traffic occurs, enable or
disable rules at will, and apply multiple, ranked rules to a program.
Creating an expert rule for a Program
Sharing expert rules
Creating an expert rule for a Program
Expert rules for programs are enforced in the order they are ranked. Therefore, when
you create expert rules for a program, make sure that the last rule you create for that
program is a Block All rule.
To create an expert rule for a program:
1. Select Program Control|Programs, then click Options.
2. Select Expert Rules, then click Add.
The Add rule dialog appears.
3. Create Expert Program rule.
4. Click OK.
Sharing expert rules
Expert firewall rules (created in the Firewall | Expert panel) cannot be directly applied
to a single program. If the rule is enabled, it is applied globally. Similarly, an expert rule
you created for one program cannot be directly applied to another program.
However, you can create a copy of the existing expert rule and apply it to any program.
Note that none of the changes you make to the copy will be reflected in the original.
If you created port rules for Programs in a version of ZoneAlarm security
software, prior to 4.0, those port rules will be automatically converted to expert
rules and visible in the Expert panel of the Program Options dialog. To access
the Expert panel, select Program Control|Programs, then click Options.
For tips on setting up expert rules for your programs, visit the ZoneAlarm User
Forum (http://www.zonealarm.com/forum) and search for program rules.
The Add rule dialog contains the same fields and options that are available when
you create Expert Firewall rules. Note, however, that IGMP and Custom protocols
cannot be applied to expert rules for Programs. See Creating expert firewall
rules, on page 48.
Chapter 5: Program Control Sharing expert rules
To apply an existing expert firewall rule to a program:
2. Select the rule you want to apply, then press CTRL+C.
4. In the Programs column, select the program to which you want to apply the expert
rule, then click Options.
5. Select Expert Rules, then press CTRL+V.
The Expert rule is applied to the program.
To disable an Expert rule:
2. Select the program for which you want to disable an Expert Program rule, then
right-click and select Disable from the shortcut menu.
The rule will be grayed-out.
Chapter 5: Program Control Sharing expert rules
Program Control Sharing expert rules
Program Control Sharing expert rules
Chapter
117
6
ZoneAlarm browser security
ZoneAlarm adds a toolbar to your browser that protects
your computer and your personal data and privacy while
you are on the Web.
Topics:
Using ZoneAlarm browser security, on page 117
Using ZoneAlarm browser security
The ZoneAlarm browser security toolbar* adds the following important protections.
Warns you when you go to sites that do not have adequate security credentials.
Detects known and unknown phishing Web sites.
When virtualization is enabled, it can stop malicious zero day drive-by downloads,
meaning malware that is not yet known by anti-virus and anti-spyware engines and has no
known solution. (Not included in some versions.)**
Lets you choose a Privacy Browser option when you want to leave no trace on your
computer of what youve typed or where youve been. (Not included in some versions.)**
Checks anything you download from the Web for malware, using a sophisticated multi-
layer scanning process. (Not included in some versions.)**
Blocks the processes that keylogger and screen grabber malware use to secretly record
your keystrokes or onscreen activity. This helps ensure that even keyloggers or screen
Chapter 6: ZoneAlarm browser security Using ZoneAlarm browser security
grabbers that have not yet been discovered are rendered harmless. (Not included in
some versions.)**
See the Help provided in the ZoneAlarm browser toolbar for full details.
*Also called ForceField in some versions.
**See www.zonealarm.com/featurehistory to find out which features are included each
product.
Turning virtualization on
Virtualization may not be on by default in your version of the software. (Not included in
some versions. You can upgrade to include this protection.)
Virtualization is the feature that can stop dangerous drive-by downloadseven ones
that are not yet known by anti-virus and anti-spyware engines.
To enable virtualization:
1. Select Browser Security|ForceField.
2. Click the Settings button.
3. Select Enable virtualization.
Turning browser security on and off
ZoneAlarm browser security performs much of its work behind the scenes, until it
needs to warn you about a danger or let you know the results of a download scan. You
know that ZoneAlarm browser security is on you when you see the ZoneAlarm toolbar
in your browser. Also, a faded white edge appears around your browser (except when
browser window is maximized).
To turn browser security or off from ZoneAlarm:
1. Select Browser Security.
2. Click On or Off.
To turn browser security on or off from your browser:
1. In your browser window, choose View | Toolbars, and then select or deselect
Browser security toolbar or Forcefield security toolbar.
2. Restart your browser.
Accessing ZoneAlarm browser security Help and troubleshooting
1. With ZoneAlarm browser security enabled, open a Web browser.
2. From the ZoneAlarm browser toolbar menu, choose Help.
Chapter 6: ZoneAlarm browser security Using ZoneAlarm browser security
Chapter
120
7
Virus and spyware protection
The integrated antivirus and anti-spyware feature protects
your computer against viruses and spyware in a single pow-
erful operation. Multiple scanning options automatically
detect viruses and spyware and render them harmless be-
fore they can damage your computer.
Topics:
Spyware and virus Protection, on page 120
Customizing virus protection options, on page 122
Performing a scan, on page 129
Viewing virus and spyware protection status, on page 135
Monitoring virus protection, on page 136
Spyware and virus Protection
The anti-virus/anti-spyware engine keeps known and unknown malware from affecting
your computer by scanning files and comparing them to a database of known malware and
against a set of characteristics and patterns (heuristics) that reflect malware behavior. Files
can be scanned as they are opened, closed, executed, or as part of a full computer-wide scan.
If a virus is detected, ZoneAlarm security software renders it harmless, either by repairing
or denying access to the infected file.
Turning on virus and spyware protection
Scheduling regular scans
Keeping virus definitions up-to-date
Chapter 7: Virus and spyware protection Turning on virus and spyware protection
Turning on virus and spyware protection
If you chose not to turn on the anti-virus protection feature in the Configuration
Wizard following installation, you can turn it on manually.
To enable virus and spyware protection:
1. Select Anti-virus/spyware.
2. On Anti-virus/spyware panel, select On.
Scheduling regular scans
By default, a system malware scan is performed once per week. You can customize the
time and frequency. Scanning your computer for viruses and spyware is one of the most
important things you can do to protect the integrity of your data and computing
environment.
If your computer is not on when the scheduled scan is set to occur, the scan will occur
fifteen minutes after your computer is restarted.
To schedule a scan:
2. Click Advanced Options.
3. Under Advanced Settings, select Scan Schedule.
4. Select the Scan for viruses check box, then specify a day and time for the scan.
5. Specify the scan frequency.
6. Click OK.
Keeping virus definitions up-to-date
Every virus or spyware application contains unique identification information, known
as its signature definition file. These files are the maps used to locate viruses and
spyware on your computer. As new viruses or spyware applications are discovered,
ZoneAlarm security software updates its databases with the signature definition files it
needs to detect these new threats.
Therefore, your computer is vulnerable to viruses and spyware whenever its database of
virus definitions files becomes outdated. But, do not worry:
By default, the signature files are automatically updated frequently.
The ZoneAlarm Anti-virus protection feature is incompatible with other virus
protection software. Before you turn on the Anti-virus protection feature, you
must uninstall any other anti-virus software from your computer, including suite
products that include virus protection among their features.
Chapter 7: Virus and spyware protection Customizing virus protection options
If you hear of an outbreak and want to get the latest updates immediately, click
Check for Updates under QuickTasks in the ZoneAlarm window.
This panel displays the Update status of your signature files.
Figure 7-1: Anti-virus/spyware status
By leaving the automatic update feature on, you will always receive the latest signature
files when they are available.
To customize automatic signature updates:
1. Click the Advanced Options button.
2. Select Updates, then:
Select the Enable automatic anti-virus updates check box.
Adjust the update frequency if you want updates more or less often.
3. Click OK.
Customizing virus protection options
In addition to choosing the type of scan you want to perform, you also can specify the
method used to detect viruses, and set treatment methods.
ZoneAlarm security software provides several types of virus scans to keep your
computer and data safe: system scans, on-access scans, and e-mail scans.
Specifying scan targets
Choosing a scan mode
Configuring on-access scanning
Enabling automatic virus treatment
Chapter 7: Virus and spyware protection Specifying scan targets
Specifying scan options
Excluding items from virus scans
Specifying scan targets
You can specify which drives, folders, and files are scanned when a scheduled or manual
system scan occurs. Exclude or include an item in the scan by selecting the checkbox
beside it. By default, ZoneAlarm security software only scans local hard drives.
Figure 7-2: Scan targets dialog box
Table 6-2 below provides an explanation of the icons shown in the Scan Targets dialog
box.
Icon Explanation
The selected disk and all sub-folders and files will be
included in the scan.
The selected disk and all sub-folders and files will be
excluded from the scan.
The selected disk will be included in the scan, but one or
more sub-folders or files will be excluded from the scan.
The selected folder will be excluded from the scan, but one or
more sub-folders or files will be included in the scan.
Table 7-3: Icons indicating scan targets
Chapter 7: Virus and spyware protection Choosing a scan mode
To specify scan targets:
1. Select Anti-virus/spyware and click Advanced Options.
2. Under Virus Management, select Scan Targets.
3. Select the drives, folders, and files to be scanned.
The Other option listed refers to RAM disks and any unknown drive other than
floppy, removable, local, remote, CD, and network drives.
4. Select or clear the scan boot sectors for all local drives check box.
5. Select or clear the scan system memory check box, then click OK.
Choosing a scan mode
You can choose one of four different system scan modes, from the most thorough to
the fastest. Scan modes apply to the scans that run according to a regular schedule and
when you click a Scan button.
For the first system scan after installation, ZoneAlarm uses the Ultra Deep scan mode
in order to create a secure baseline. After that, system scans default to the Normal
mode, which is faster and skips archive files and other files that are not executable.
Choosing a Scan Mode:
1. Select Anti-virus/spyware, and then click the Advanced Options button.
2. In the dialog that appears, under Advanced Options, click Scan Mode.
The selected folder will be included in the scan. A gray check
mark indicates that scanning of the folder or file is enabled
because scanning has been enabled for a higher level disk or
folder.
The selected folder will be excluded from the scan. A gray x
mark indicates that scanning of the folder or file is disabled
because scanning has been disabled for a higher level disk or
folder.
Icon Explanation
Table 7-3: Icons indicating scan targets
Keep in mind that your Scan Mode settings override your Scan Target settings.
For example, regardless of the folders you select as your Scan Targets, if Quick
Scan is your Scan Mode then the only folders scanned are Windows and Startup
folders. See also Choosing a scan mode, on page 124.
Chapter 7: Virus and spyware protection Configuring on-access scanning
3. Choose a scan:
Configuring on-access scanning
On-access scanning protects your computer from viruses by detecting and treating
viruses that may be dormant on your computer. It is on by default and supplies the most
active form of malware protection, so we recommend you keep it enabled.
Files are scanned for viruses as they are opened, executed, or saved, thereby allowing
immediate detection and treatment of viruses.
To enable on-access scanning:
2. In the Protection area, click Advanced Options.
Ultra Deep Scan Slowest and most thorough. Scans all files, fold-
ers, and archive files (e.g., zipped files). Also
includes heuristic scanning to detect malware not
yet registered in databases. Note that heuristics
that may occasionally result in false positive
detections since it detects characteristics rather
than signatures.
Deep Scan Very thorough. Recommended every six months or
after exposure to a virus outbreak. Scans all files
and folders. Skips archive files which pose mini-
mal risk because they cannot self-activate.
Normal Scan Fast, default scan. Recommended as your regular
scan mode. By skipping archive and non-execut-
able files you get a quicker scan with minimal risk
of missing viruses that could self-activate.
Quick Scan Fastest. Scans only Windows folders, Startup
folders, and folders linked to startup items, which
are common places for hackers to place viruses.
(Programs in these folders can run automatically
without permission, which creates the most risk.)
Keep in mind that your Scan Mode settings override your Scan Target settings.
For example, regardless of the folders you select as your Scan Targets, if Quick
Scan is your scan mode the only folders scanned are Windows and startup
folders.
Archive files, such as .zip files, are scanned by on-access scanning when you
open them. In Ultra Deep Scan mode, archive files will also be scanned by
system scans.
Chapter 7: Virus and spyware protection Enabling automatic virus treatment
3. Under Advanced Settings, select On-Access Scanning.
4. Select Enable On-Access Scanning, and optionally specify a mode, then click OK:
Enabling on-access scanning of network files
You can enable on-access virus/spyware scanning of the files that exist on any drives or
computers you are connected to on a network. Note that this option may not be
necessary, and may slow performance, if these drives already have full security
protection.
1. On the Antivirus/spyware panel, click Advanced Options.
2. Select On-Access Scanning.
3. Select Enable scanning of network files.
Enabling automatic virus treatment
By default, ZoneAlarm security software automatically attempts to treat files that
contain viruses. If a file cannot be repaired, the Scan Results dialog will inform you so
that you can take the appropriate action. When a virus infection is detected, the Scan
Results dialog offers the available treatment options, such as Quarantine, Repair, or
Delete.
To enable automatic virus treatment:
1. Select Anti-virus/spyware, then click Advanced Options.
2. Under Virus Management, select Automatic Treatment.
3. Select the auto treatment option you want:
4. Click OK.
Scan in Smart
Mode
(Recommended) Scans files when they are opened, saved, or exe-
cuted, and expedites this process by leveraging information from previ-
ous scans.
Scan when
reading
Scans a file when its opened or executed.
Scan when
reading and
writing
Scans a file when its opened, saved, or executed.
Alert me - do not treat automatically
Try to repair, and alert me if repair fails
Try to repair, quarantine if repair fails (recommended)

Chapter 7: Virus and spyware protection Specifying scan options
Specifying scan options
These options apply to on-demand scans and on-access scans. These options do not
apply to contextual (i.e., select item and right-click) scans.
To specify virus scan options:
2. Under Virus Management, select Scan Options.
3. Select your desired settings, then click OK.
*Other programs that may be detected as riskware include: remote
administration programs, FTP servers, proxy servers, password recovery tools,
monitoring programs, automatic dialing programs, telnet servers, Web servers,
computer tools, network tools, peer-to-peer client programs, SMTP clients, Web
toolbars, and known fraudulent programs. Of these types of programs, only those
known for security vulnerabilities will be detected as riskware.
Excluding items from virus scans
Excluding items from virus scans can be useful in the following circumstances:
Skip if the object is
greater than
This option improves scan time without increasing risk,
as virus files are usually smaller than 8 MB. While large
files ignored by the scan may contain viruses, these
viruses can still be caught by on-access scanning,
assuming you have on-access enabled.
Enter a maximum object size in the MB field.
Enable riskware*
scanning
Warns you about programs that could potentially be a
security risk if accessed or controlled by hackers. Risk-
ware includes common programs, such as chat and web
downloader programs, that are known to have security
vulnerabilities. They be used to cause damage or steal
information. When riskware is detected, ZoneAlarm asks
your permission to let it run.*
Enable cpChecker Optimizes performance by minimizing scanning accord-
ing to rules that leverage prior scan data. Works on lim-
ited file sizes and formats. Most efficient when cpSwift
is also enabled.
Enable cpSwift Optimizes performance by minimizing scanning accord-
ing to rules that leverage prior scan data. Works on any
file formats, sizes, and types. Most efficient when
cpChecker is also enabled.
Enable ADS scanning Scans alternative data streams (ADS), which can some-
times hide malware in otherwise benign files.
Enable heuristics
scanning
Scans files for specific information or characteristics
associated with malware. Adds another layer of security
by detecting viruses or spyware not yet known to virus
signature databases.
Chapter 7: Virus and spyware protection Excluding items from virus scans
When you dont want ZoneAlarm to scan certain directories, files, or programs that
you know to be safe, see Excluding files from virus scans, on page 128.
If a scan reports as a virus a program you know to be safe, see Excluding detected
viruses from scans, on page 128.
Excluding files from virus scans
You may want to exclude certain files and programs you know to be safe.
To specify items that should be ignored by virus scans:
2. Under Virus Management, select Exceptions.
3. Click the Add File button and choose from the Select type menu:
4. Do one of the following:
Click Browse to select a file you want to exclude.
To exclude a drive or group of files, enter them into the Select exception field
using one of the formats shown in the Browse dialog box.
5. Click OK.
Excluding detected viruses from scans
Some benign applications may be mistaken as viruses during a system or on-access scan.
If an application shows up in the Scan Results but you are certain it is safe, you can
exclude it from anti-virus scans by adding it to the exceptions list.
To exclude a suspected virus from future scans:
When a virus Scan Results dialog appears, right-click programs that you want to
exclude and choose Ignore Always.
The program is added to exceptions list and will no longer be detected during virus
scans.
On-Access
scan
Excludes the selected file(s)
from on-access scans, which
occur when a file is opened,
executed, or saved.
Trusted
Process
Choose this if you want to
exclude an executable (.exe)
file from scans.
Chapter 7: Virus and spyware protection Performing a scan
Performing a scan
There are several ways you can run anti-virus/spyware scans on your computer. Once a
scan starts, a dialog appears from which you can pause or cancel the scan if you want to.
You may run up to five scans simultaneously. Scans are performed in the order in which
they are initiated. System scans provide another level of protection by allowing you to
scan the entire contents of your computer at one time. System scans detect viruses that
may be dormant on your computers hard drive, and if run frequently, can ensure that
your anti-virus signature files are up to date.
Because of the thorough nature of full-system scans, some can take a while to perform.
To avoid any impact on your workflow, you can schedule system scans to run at a time
when you are least likely to be using your computer.
During scans, ZoneAlarm security software displays a special system tray icon ( ) and
provides a system tray menu option for viewing scan status. Right-click the system tray
icon and choose View Scan to check on scan status.
Clicking Pause in the Scan dialog while a scan is being performed will stop the current
scan only. On-access scanning will not be disabled. Click Pause again to resume the
current scan.
.Understanding virus scan results
Treating virus files manually
Scan How to run it
On-demand (manual) system scan Under Quick Tasks: Click Scan Computer.
Or, from the Anti-virus/spyware panel: Click
Scan Now button.
Scheduled system scan System scans are set to run regularly by
default. You can set how often they run. See
Scheduling regular scans, on page 121.
Contextual scan (manual file scan To instantly scan a specific file, right-click
the file, then choose Scan with ZoneAlarm
Anti-virus.
On-access scan Open a filethe file is instantly scanned in
the background upon opening. On-access
scanning is enabled by default. See Config-
uring on-access scanning, on page 125.
Table 7-4: How to perform different types of scans
Tip: You can customize your system scans. Choose from these scan modes: Ultra
Deep, Deep, Normal, or Quick. See Choosing a scan mode, on page 124.
Chapter 7: Virus and spyware protection Understanding virus scan results
Repairing files in an archive
Submitting viruses and spyware to ZoneAlarm for review
Viewing logged virus events
Viewing items in quarantine
Understanding virus scan results
Regardless of the method used to initiate the scan, the results of the scan are displayed
in the Scan Results dialog box as shown
below
Figure 7-5: Scan results dialog
The Active Items area of the Scan details dialog lists infections found during the scan
that could not be treated automatically. To accept the suggested treatments in the
Treatment column, click Apply. The items listed under Auto Treatment have already
been treated, you do not need to take further action.
If the scan results list any programs that you are certain are safe (not viruses), you can
exclude it from future scans. See Excluding detected viruses from scans, on page 128
Click here to send virus to SmartDe-
fense Advisor for more information
Chapter 7: Virus and spyware protection Treating virus files manually
Name
The name of the virus that caused the infection.
Treatment
Specifies the treatment applied to the infection. Possible values are Quarantined or
Deleted.
Security Risk
Indicates the risk level of the infection. All viruses are considered High risk.
Path
The location of the virus that caused the infection.
Type
Specifies whether the infection was caused by a virus, worm, or trojan.
Status
Tells you whether the file has been repaired, deleted, or remains infected. If ZoneAlarm
security software was unable to treat the item, a What to do next link may appear here.
This link will direct you to further information and instructions.
Information
Provides more detail about the infection. To get more information about a virus or
spyware, click the Learn more link.
Detail
Lists the location of virus traces. Advanced users may find this information useful for
tracking down viruses that cannot be treated automatically.
Treating virus files manually
If you do not have automatic treatment enabled, or if a file could not be repaired
automatically, you can attempt to treat it manually from the Scan Results dialog.
To treat a file manually:
1. In the Scan Results dialog, select the item you want to treat.
2. In the Treatment column, choose the treatment option you want:
Repair Tries to repair the selected
file.
Delete Deletes the selected file.
Quarantine Appends the extension .zl6 to
the infected file to render it
harmless. The file is placed in
Quarantine.
Chapter 7: Virus and spyware protection Repairing files in an archive
3. When you have finished treating files, click Close.
Repairing files in an archive
If the infected file is located in an archive file (such as a .zip file), ZoneAlarm security
software will not be able to treat it (either by repairing, deleting, or placing it in
Quarantine) while the file is still included in the archive.
To repair a file in an archive:
2. Select On-Access Scanning, then select the Enable On-Access Scanning check
box.
4. Open the file that was specified in the Scan Results dialog from within an archival
utility, such as WinZip.
On-access scanning will scan the file for infections. The Scan Results dialog will
appear with the results of the scan. If the file still cannot be repaired, see Treating
virus files manually, on page 131.
Submitting viruses and spyware to ZoneAlarm for review
Reporting and submitting suspected malware to ZoneAlarm, a Check Point Software
Technologies, Inc. Company helps to improve the security and protection of all Internet
users. The ZoneAlarm Security Team monitors all incoming submissions for new files.
The ZoneAlarm Security Team will act on your submission as appropriate and may
contact you for more information or to provide details about the files you submit.
Due to the volume of malware released each day, our researchers cannot respond to
each file you submit. However, we appreciate the assistance of our users and thank you
for taking the time to help secure the Internet. Please address any questions or concerns
to: [email protected]
To submit malware to ZoneAlarm for review:
1. Place the malware file in a password-protected .zip archive with the password set to
infected.
For help with creating a password protected archive, refer to the Help for WinZip.
If the results of a virus scan contain Error, No treatment available, or Treatment
failed, it means that there is not yet a way to automatically remove the virus
without risking the integrity of your computer or other files. In some cases, there
may be manual treatments available to you. To find out, enter the name of the
virus along with the word removal into a search engine, such as Google or
Yahoo, to locate removal instructions. Otherwise, know that were constantly
researching viruses and developing safe ways to remove them.
Chapter 7: Virus and spyware protection Viewing logged virus events
2. Send the .zip file to [email protected]
Use this e-mail address only for sending malware to the ZoneAlarm Security Team.
Viewing logged virus events
By default, all Virus events are recorded in the Log Viewer.
To view logged Virus events:
2. Select Virus, from the Alert Type drop-down list.
Table 6-3 provides an explanation of the log viewer fields available for Virus events.
Please do not send malware files if you feel you cannot do so safely or if it would
increase the risk of infection or damage to your system. Do not e-mail suspected
malware files to others as they could be malicious.
Field Information
Date The date of the infection.
Type The type of event that occurred. Possible
values for this field include:
Update
Scan
Treatment
E-mail
Virus name The common name of the virus. For example,
iloveyou.exe.
Filename The name of the infected file, the name of
files being scanned, or the name and version
number of update and/or engine.
Table 7-6: Virus event log fields
Chapter 7: Virus and spyware protection Viewing items in quarantine
Viewing items in quarantine
In some cases, items detected during a virus or spyware scan cannot be treated or
removed automatically. These items are usually placed into quarantine so that they are
rendered harmless but preserved so that they may be treated in the future after an
update to your virus and spyware signature files.
To view viruses in quarantine:
1. Select Anti-Anti-virus / Anti-spyware | Quarantine.
2. Choose Viruses from the Quarantined View drop-down list.
3. Optionally, select a virus entry in the list and click Delete (to delete it from your
computer), Restore (to restore it to your computer), or More Info (to consult
SmartDefense Advisor for more information about it).
The virus view in quarantine contains the following columns of information:
Infection
Days in Quarantine
The number of days the virus has been in quarantine.
Path
The location of the virus on your computer.
To view spyware in quarantine:
1. Select Anti-virus / Anti-spyware | Quarantine.
security software. Possible values include:
Updated, Update cancelled, Update Failed
Scanned, Scan cancelled, Scan Failed
File Repaired, File Repair Failed
Quarantined, Quarantine Failed
Deleted, Delete Failed
Restored, Restore Failed
Renamed, Rename Failed
Actor Whether the action was manual or auto.
E-mail If the virus was detected in e-mail, the e-
mail address of sender of the infected mes-
sage.
Field Information
Table 7-6: Virus event log fields
Chapter 7: Virus and spyware protection Viewing virus and spyware protection status
2. Choose Spyware from the Quarantined View drop-down list.
3. Optionally, select a spyware entry in the list and click Delete (to delete it from your
computer), Restore (to restore it to your computer), or More Info (to consult
SmartDefense Advisor for more information about it).
The spyware view in quarantine contains the following columns of information:
Type
Name
The name of the spyware that was detected.
Risk
The risk level of the infection. Indicates whether the spyware is benign like adware, or a
serious threat like keylogging software.
Days in Quarantine
The number of days the spyware has been in quarantine.
Viewing virus and spyware protection
status
The Anti-virus/spyware panel displays the status of your virus and spyware
protection. From this area you can:
Verify that virus and spyware protection is turned on.
The dates and times of your last scan(s).
Update definition files.
Invoke a scan.
View results of latest scan.
Access advanced settings.
The section that follows describes the status information located on the main panel of
the Anti-virus / spyware panel.
Monitoring virus protection
Enabling and disabling Anti-virus Monitoring
Viewing Status Messages in the Anti-virus Monitoring panel
Performing a scan
Chapter 7: Virus and spyware protection Monitoring virus protection
Monitoring virus protection
One of the most important things you can do to protect your computer against viruses
is to install an anti-virus software product. Once installed, however, the anti-virus
software must be kept up to date to ensure protection against new viruses as they are
created.
No matter which anti-virus software product you use, if you find yourself in either of
the following situations, you are putting your computer at risk for virus attack:
Your trial or subscription period has expired.
Your virus signature files are out of date.
Anti-virus Monitoring is a secondary defense system that tracks anti-virus software you
have installed on your computer and lets you know when that anti-virus software is out-
of-date or turned off. This secondary alerting system works as a back-up to your anti-
virus softwares built-in warning and update system. Most anti-virus products include
automatic updating, and alert you when your virus definition files become outdated.
Note that not all anti-virus products are supported by this feature.
Monitoring Coverage
Monitoring product status
Monitoring antivirus status alerts
Viewing Status Messages in the Anti-virus Monitoring panel
Monitoring Coverage
Anti-virus Monitoring currently detects anti-virus software from these popular
manufacturers:
Symantec
McAfee
Computer Associates
Trend Micro
If you use a different anti-virus product, Anti-virus Monitoring will not recognize it at
this time. This does not mean that your ZoneAlarm product is malfunctioning; your
security remains as strong as ever. ZoneAlarm security software will be adding the
ability to recognize more products over time. If your anti-virus product is not currently
supported, you may simply turn off the Anti-virus Monitoring feature. Do not worry--
Anti-virus Monitoring is monitoring only and has no affect on the firewall and no direct
affect on security.
Chapter 7: Virus and spyware protection Monitoring product status
Monitoring product status
In these products, you will see an Anti-virus Monitoring panel. From this panel you can
view the status of your anti-virus product. You can also turn monitoring on or off, or
you can turn on or off just the monitoring alerts.
To turn off Monitoring and Monitoring alerts:
1. Select Anti-virus Monitoring.
2. In the Monitoring area, select Off.
3. Clear the check box Notify me of anti-virus security lapses.
In products where there is no Anti-virus Monitoring panel because the products are
equipped with ZoneAlarm Anti-virus, there are monitoring alerts. When ZoneAlarm
Anti-virus is turned off, the Anti-virus Monitoring feature is activated. Monitoring can
be turned off from any monitoring alert, or from the Advanced Options dialog.
To turn off Monitoring
1. Select Alerts & Logs | Main, then click Advanced.
2. Select the Alerts Events panel.
3. Clear the following check boxes:
4. Click OK.
If you do not have ZoneAlarm Anti-virus installed and are using another anti-virus
software product, Anti-virus Monitoring will be enabled by default. In addition, you can
choose to enable Monitoring alerts, which will appear whenever a lapse in protection is
detected.
To enable or disable Anti-virus Monitoring:
1. Select Anti-virus Monitoring.
2. In the Anti-virus Monitoring area, select On.
Viewing Status Messages in the Anti-virus Monitoring
panel
The Status area of the Anti-virus Monitoring panel displays the current state of your
installed Anti-virus products, as well as the state of Anti-virus Monitoring.
Anti-virus protection not found
Anti-virus events
Virus and spyware protection Viewing Status Messages in the Anti-virus Monitoring
Chapter
139
8
Parental Controls
Parental Controls protect your family from Web sites con-
taining content you do not want them to access. You can
choose which categories of Web sites to block, and use
Smart Filtering to instantly categorize and filter previously
un-rated sites.
Topics:
Using Parental Controls, on page 139
Choosing which content categories to block, on page 141
Using Parental Controls
When your browser is pointed to a Web site or other Web-based content, ZoneAlarm
security software contacts Blue Coat Parental Controls servers to see how that site or
content has been categorized. If the site your browser is trying to reach has been placed by
Blue Coat in a category you have decided to block, access to the site is denied. This
process normally takes less than a second. A Parental Control Violation page is displayed,
explaining why the site was blocked. If you disagree with a site categorization, you can
request a reevaluation of the site by clicking a link in the Filtering Violation page that
appears when the site is blocked.
Working with parental controls and smart filtering
Choosing which content categories to block
Working with parental controls and smart filtering
When you enable Parental Controls, you immediately block Web sites that Blue Coat has
determined contain nudity, pornography, information on illegal drugs, racist text or images,
Chapter 8: Parental Controls Working with parental controls and smart filtering
and other content you might not want your children exposed to. If you enable Smart
Filtering, new and nonrated sites will instantly be categorized and filtered, enhancing
your protection.
Enabling or disabling Parental Controls
Enabling or disabling Smart Filtering
Setting timeout options
Enabling or disabling Parental Controls
The Parental Controls let you block sites that are set to Block in the Categories List. If
Parental Controls are disabled, Category and Smart Filtering settings are ignored.
To enable or disable Parental Controls:
1. Select Parental Controls | Main.
2. In the Parental Controls area, click On or Off.
Enabling or disabling Smart Filtering
Smart Filtering (Dynamic Real-Time Rating) lets you block undesirable sites even if they
are brand-new and have not yet been categorized. When this feature is enabled, and
your computer points to uncategorized content, Blue Coat instantly analyzes the
content of the Web site and places it in a category. The site is then blocked or allowed
based on your Parental Controls settings. This process normally takes two to four
seconds.
To enable or disable Smart Filtering:
1. Select Parental Controls | Main.
2. In the Smart Filtering area, select On or Off.
To access this option, Parental Controls must be enabled.
Setting timeout options
Timeout options determine how long ZoneAlarm security software will try to obtain a
rating for a Web site, and what it do if it is unable to obtain one.
To set timeout options:
1. Select Parental Controls | Main,
2. Click the Advanced button.
To prevent your children from changing your Parental Controls settings, set a
ZoneAlarm security software password. See Setting your password, on
page 14.
Chapter 8: Parental Controls Choosing which content categories to block
3. Specify your timeout preferences.
4. Click OK.
Choosing which content categories to block
Parental Controls provide numerous categories for filtering Web content. Table 11-1
below provides a description of each category, along with its default setting.
To change the setting for a category:
1. Select Parental Categories | Main.
2. In the Site Categories to block column, select or clear the check box beside the
category.
A red check mark indicates that content belonging to that category will be blocked.
An empty check box indicates that content belonging to that category will be
allowed.
Parental Con-
trols timeout
(sec)
The interval, in seconds, for which ZoneAlarm security software will try
to obtain a rating when Smart Filtering is disabled.
Timeout when
DRTR enabled
(sec)
The interval, in seconds, for which ZoneAlarm security software will try
to obtain a rating when Smart Filtering is enabled.
When rating
unavailable
Specifies whether ZoneAlarm security software should allow or block
sites for which a rating is unavailable.
If When rating unavailable is set to allow the site, setting the timeout options to
very low numbers might cause undesirable sites to be allowed. We recommend
keeping the default timeout options.
To block all site categories, click Check All. To allow all site categories, click
Clear All. To revert to default settings, click the Reset to Defaults link.
Category Definition
Default
Setting
Abortion Site which provide information or arguments in
favor of or against abortion; describes abortion pro-
cedures; offers help in obtaining or avoiding abor-
tion; provides information on the physical, social,
mental, moral, or emotional effects, or the lack
thereof, of abortion.
Allowed
Table 8-1: Parental Control categories
Adult: Intimate
Apparel/Swimsuit
Sites offering pictures of models in lingerie, swim
wear or other types of suggestive clothing. This
does not include sites selling undergarments as a
sub-section of the other products offered.
Allowed
Adult: Nudity Sites containing nude or semi nude depictions or
pictures of the human body. These depictions are
not necessarily sexual in intent or effect but may
include sites containing nude paintings or photo
galleries of artistic nature. It also includes nudist
or naturist sites that contain pictures of nude indi-
viduals.
Blocked
Adult: Pornogra-
phy
Sites containing sexually explicit material for the
purpose of arousing a sexual or prurient interest.
Blocked
Adult: Sex Edu-
cation
Sites that provide information on reproduction, sex-
ual development, sexually transmitted disease,
contraception, safe sex practices, sexuality and
sexual orientation. This does not include sites
offering suggestions or tips on how to have better
sex.
Allowed
Alcohol/Tobacco Sites that promote or offer for sale alcohol/tobacco
products or provide the means to create them. Also
may include sites that glorify, tout or otherwise
encourage the consumption of alcohol/tobacco.
Blocked
Chat Room /
Instant Messen-
ger
Sites that provide chat and Instant Messaging
capability.
Allowed
Criminal Skills /
Illegal Skills /
Cheating
Sites that advocate or give advice on performing
illegal acts such as service theft, evading law
enforcement, fraud, burglary techniques and pla-
giarism. Sites that provide instructions about or
promote crime, unethical/dishonest behavior or
evasion of prosecution thereof.
Blocked
Cult / Occult Prominent organized modern religious groups that
are identified as "cults" by three or more authorita-
tive sources. Sites that promote or offer methods,
means of instruction, or other resources to affect or
influence real events through the use of spells,
curses, magic powers or supernatural beings.
Allowed
Dating and Per-
sonals
Sites that promote interpersonal relationships.
Does not include those pertaining to gay or lesbian
appeal.
Allowed
Category Definition
Default
Setting
Drugs: Illegal
Drugs
Sites that promote, offer, sell, supply, encourage or
otherwise advocate the illegal use, cultivation,
manufacture, or distribution of drugs, pharmaceu-
ticals, intoxicating plants or chemicals and their
related paraphernalia.
Blocked
E-mail Sites offering Web-based E-mail services. Allowed
Freeware / Soft-
ware Downloads
Sites that promote or offer free software or prod-
ucts for general download or trial purposes.
Allowed
Gambling Sites where a user can place a bet or participate in
a betting pool (including lotteries) online; obtain
information, assistance or recommendations for
placing a bet; receive instructions, assistance or
training on participating in games of chance. Does
not include sites that sell gambling related prod-
ucts or machines.
Blocked
Gay and Lesbian Sites that provide information on or cater to gay
and lesbian lifestyles. Does not include sites that
are sexually oriented.
Allowed
Glamour / Life-
style
Sites that emphasize or provide information or
news on how the user can achieve physical attrac-
tiveness, allure, charm, beauty, or style with
respect to personal appearance.
Allowed
Government: Mil-
itary
Sites that promote or provide information on mili-
tary branches or armed services.
Allowed
Hacking / Proxy
Avoidance Sys-
tems
Sites providing information on illegal or question-
able access to or the use of communications equip-
ment/software, or provide information on how to
bypass proxy server features or gain access to URLs
in any way that bypasses the proxy server.
Blocked
Humor / Jokes Sites that primarily focus on comedy, jokes, fun,
etc. Does not include sites containing jokes of
adult or mature nature.
Allowed
Internet Auctions Sites that support the offering and purchasing of
goods between individuals.
Allowed
MP3 / Streaming Sites that support and or allow users to download
music and media files such as MP3, MPG, MOV,
etc. Also includes sites that provide streaming
media (radio, movie, TV).
Allowed
News Groups Sites that offer access to Usenet New Groups or
other like sites.
Allowed
Category Definition
Default
Setting
News and Media Sites that primarily report, information, or com-
ments, on current events or contemporary issues of
the day. Items like weather, editorials, and human
interest are considered target within the context of
major news sites.
Allowed
Online Games Sites that provide information and support game
playing or downloading, video games, computer
games, electronic games, tips and advice on games
or how to obtain cheat codes, journals and maga-
zines dedicated to game playing, online games, as
well as sites that support or host online games
including sweepstakes and giveaways.
Allowed
Pay to Surf Sites Sites that pay users money for clicking on specific
links or locations.
Blocked
Political /Activist
/ Advocacy
Sites that are sponsored by and contain informa-
tion about specific political parties or groups. Sites
that are sponsored by or devoted to organizations
that promote change or reform in public policy,
public opinion, social practice, economic activities
and relationships. Excludes commercially spon-
sored sites dedicated to electoral politics or legisla-
tion.
Allowed
Religion Sites that promote and provide information on
Buddhism, Baha'I, Christianity, Christian Science,
Hinduism, Islam, Judaism, Mormonism, Shinto,
Sikhism, Atheism, other conventional or unconven-
tional religious or quasi-religious subjects, as well
as churches, synagogues, other houses of worship,
any faith or religious beliefs including alternative
religions such as Wicca and witchcraft.
Allowed
Search Engines /
Portals
Sites that support searching the Web, indices and
directories.
Allowed
Shopping Sites that provide the means to obtain products
and services that satisfy human wants and or
needs. This does not include products or services
that are principally marketed to satisfy industrial or
commercial needs.
Allowed
Sports / Recre-
ation / Hobbies
Sites that promote or provide information about
spectator sports.
Allowed
Category Definition
Default
Setting
Violence / Hate /
Racism
Sites which advocate or provide instructions for
causing physical harm to people or property
through use of weapons, explosives, pranks, or
other types of violence. Sites that advocate hostility
or aggression toward an individual or group on the
basis of race, religion, gender, nationality, ethnic
origin, or other involuntary characteristics; a site
which denigrates others on the basis of those char-
acteristics or justifies inequality on the basis of
those characteristics; a site which purports to use
scientific or other commonly accredited methods to
justify said aggression, hostility or denigration.
Blocked
Weapons Sites that sell, review, or describe weapons such as
guns, knives, or martial arts devices, or provide
information on their use, accessories, or other
modifications.
Blocked
Web Communica-
tion / Message
Boards
Sites that allow or offer Web based communication
using any of the following mediums: E-mail (Web
based), Chat, Instant Messaging, Message Boards,
etc.
Allowed
Web Hosting /
Personal Web
Pages
Sites of organizations that provide top-level domain
pages of Web communities or hosting services.
Sites that host Web Chat services, on-IRC chat
rooms, Chat sites via HTTP, home pages devoted to
IRC, as well as sites that offer forums or discussion
groups. Sites that promote or provide the means to
practice illegal or unauthorized acts using com-
puter-programming skills (hacking).
Also sites containing ALL types of content such as
GEO Cities.
Allowed
Category Definition
Default
Setting
If you are using ZoneAlarm Security Suite and you choose to block new
categories, you may want to clean your browser cache to remove pages from
newly blocked sites that may be stored there. Otherwise, anyone using your
computer will have access to blocked content that has been stored in your
browsers cache.
Parental Controls Choosing which content categories to block
Chapter
147
9
E-mail protection
Worms, viruses, and other threats often use e-mail to
spread from computer to computer. MailSafe protects your
friends, co-workers, and others in your address book and
helps keep destructive viruses from spreading. The Junk E-
mail filter blocks out spam.
Topics:
Understanding e-mail protection, on page 147
Enabling Outbound MailSafe protection, on page 148
Customizing Outbound MailSafe protection, on page 148
Filtering junk e-mail (spam), on page 150
Understanding e-mail protection
Attaching files to e-mail messages is a convenient way of exchanging information. However,
it also provides hackers with an easy way of spreading viruses, worms, Trojan horse
programs, and other malware.
The outbound MailSafe feature stops worms from mass-mailing themselves to everyone
you know.
Outbound MailSafe protection
Enabling Outbound MailSafe protection
Customizing Outbound MailSafe protection
Chapter 9: E-mail protection Outbound MailSafe protection
Outbound MailSafe protection alerts you if your e-mail program tries to send an
unusually large number of messages, or tries to send a message to an unusually large
number of recipients. This prevents your computer from being used without your
knowledge to send infected attachments to other people. In addition, Outbound
MailSafe protection verifies that the program attempting to send the e-mail has
permission to send e-mail messages.
Outbound MailSafe protection works with any e-mail application that uses SMTP.
Enabling Outbound MailSafe protection
For your security, Outbound MailSafe Protection is enabled by default. When
Outbound protection is enabled, Outbound MailSafe settings apply to all programs with
send mail privileges.
To enable or disable Outbound MailSafe Protection
1. Select E-mail Protection.
2. In the Outbound MailSafe Protection area, select On or Off.
Customizing Outbound MailSafe
protection
By default, an Outbound MailSafe protection alert is displayed when your e-mail
application attempts to send more than five e-mail messages within two seconds, or if an
e-mail message has more than fifty recipients. You can customize these settings to
extend the time interval, increase the number of messages and recipients allowed, or
specify the e-mail addresses that are allowed to send e-mail from your computer.
Enabling Outbound MailSafe protection by program
Setting Outbound MailSafe protection options
Enabling Outbound MailSafe protection by program
When Outbound MailSafe protection is set to On, protection is enabled for all
programs that have been granted permission to send e-mail.
You can customize Outbound MailSafe protection by enabling or disabling it for
particular programs.
For information on setting permissions for a program, see Setting permissions for
specific programs, on page 101.
Chapter 9: E-mail protection Setting Outbound MailSafe protection options
To enable or disable Outbound MailSafe protection for a program:
2. In the Programs column, right-click a program name, then select Options.
4. In the Outbound MailSafe Protection area, select the check box labeled Enable
Outbound MailSafe Protection for this program.
To disable Outbound MailSafe protection, clear this check box.
5. Click OK.
Setting Outbound MailSafe protection options
By default, Outbound MailSafe Protection is activated when your computer attempts to
send more than five e-mail messages within two seconds, or an e-mail message with
more than 50 recipients.
Because even legitimate e-mail messages may have one or both of these characteristics,
you may want to customize Outbound MailSafe protection settings to better meet your
individual needs.
To customize Outbound MailSafe protection settings:
1. Select E-mail Protection, then click Advanced.
The Advanced E-mail Protection dialog appears.
2. In the Display Outbound MailSafe Protection Alerts When area, choose your
settings.
3. Click OK.
Too many e-
mails are sent
at once
An Outbound MailSafe protection alert appears when your computer
attempts to send more than the specified number of e-mails within the
specified time interval.
A message has
too many
recipients
attempts to send an e-mail message with more than the specified num-
ber of recipients.
If the senders
address is not
in this list
attempts to send an e-mail whose originating address (i.e., the address
in the From: field) does not appear on the list. To prevent ZoneAlarm
security software from blocking all outgoing e-mail, make sure that your
valid e-mail address appears on this list.
Chapter 9: E-mail protection Filtering junk e-mail (spam)
Filtering junk e-mail (spam)
Use the junk e-mail filter to prevent unsolicited junk e-mail (commonly referred to as
spam) from cluttering your Inbox. The Junk E-mail filter supports Microsoft Outlook
and Outlook Express (both referred to in this document simply as Outlook).
During installation, ZoneAlarm security software adds the junk e-mail filter toolbar to
your Outlook e-mail programs toolbar.
Figure 9-1: The junk e-mail filter toolbar
The junk e-mail filter also adds three special folders to your Outlook folder list:
ZoneAlarm Challenged Mail, ZoneAlarm Junk Mail, and ZoneAlarm Phishing Mail.
When ZoneAlarm security software identifies an e-mail message as junk, phishing, or
challenged, it puts the message in one of these folders. If you are using Outlook to
access Hotmail, you must use the junk e-mail filters spam blocking features and special
folders instead of Hotmails.
Allowing or blocking e-mail from specific senders, companies, or lists
Allowing or blocking e-mail from specific companies
Adding contacts to the Allowed List
Allowing e-mail from distribution lists
Scanning your Inbox
Reporting junk e-mail
Reporting phishing e-mail
Specifying junk e-mail message options
Challenging e-mail from unknown senders
Specifying your outbound e-mail server
Customizing junk e-mail filter settings
Viewing junk e-mail filter reports
If you have installed ZoneAlarm security software but the junk e-mail filter
toolbar does not appear in your Outlook toolbar, right-click in your Outlook
toolbar and choose ZoneAlarmOutlookAddin.
Chapter 9: E-mail protection Allowing or blocking e-mail from specific senders
Allowing or blocking e-mail from specific senders
Each time you send an e-mail to a new person, the junk e-mail filter automatically adds
to the Allowed list, the address in the To field. Messages sent to you from those
addresses will be put in your Inbox.
When you receive an e-mail from a sender on the Blocked list, the junk e-mail filter
automatically moves the message to the Outlook folder named ZoneAlarm Junk Mail.
If an unwanted e-mail arrives in your Outlook Inbox, you can easily add the sender of
that message to your Blocked People list.
To add e-mail addresses to your Allowed or Blocked list:
1. In your Outlook or Outlook Express e-mail program, select an e-mail.
2. In the junk e-mail filter toolbar, click ZoneAlarm Options, then choose Allow
Sender or Block Sender.
Allowing or blocking e-mail from specific companies
The junk e-mail filter allows you to add all e-mail addresses originating from a particular
company or network domain to your Companies Allowed or Blocked lists.
To add companies to your Allowed or Blocked list:
2. In the junk e-mail filter toolbar, click ZoneAlarm Options, then choose Allow
Senders Company or Block Senders Company.
The junk e-mail filter adds the domain portion of the sender's address (for example,
example.com) to the list of allowed or blocked addresses.
Adding contacts to the Allowed List
You can scan the default contacts folder in your e-mail program to add contacts to the
list of senders from whom you wish to receive e-mail.
To add contacts to the Allowed List:
1. Open your Outlook or Outlook Express e-mail program.
2. In the junk e-mail filter toolbar, click ZoneAlarm Options, then choose Populate
Allowed List.
Scanning your Inbox
You can scan the contents of your Inbox for phishing e-mail and spam. You can use the
Scan Inbox option to scan IMAP, POP3, and Hotmail accounts created in Outlook
Express, and IMAP, POP3 and Exchange server accounts in Outlook.
To scan your Inbox:
1. Open your Outlook or Outlook Express e-mail program.
Chapter 9: E-mail protection Allowing e-mail from distribution lists
2. Select the Inbox you want to scan.
3. In the junk e-mail filter toolbar, click ZoneAlarm Options, then choose Scan
selected Inbox.
Allowing e-mail from distribution lists
If you receive or send e-mail to multiple addressees contained in a distribution list, the
junk e-mail filter may block that list name unless it has been added to the Lists panel.
To allow e-mail from mailing lists:
1. Start your Outlook or Outlook Express e-mail program.
2. In the junk e-mail filter toolbar, click ZoneAlarm Options | Configure
Preferences | Lists.
3. Click Add.
4. Type the e-mail address of the distribution list into the text entry area, then click OK.
The junk e-mail filter adds the distribution lists e-mail address to the list of allowed
addresses.
5. Click Close to save your changes and close the Lists panel.
Reporting junk e-mail
The junk e-mail filter allows you to contribute instances of junk e-mail to the
ZoneAlarm Collaborative Filter database.
The junk e-mail filter never sends e-mail of any type from your computer without your
permission. When you contribute junk e-mail to the Collaborative Filter database, you
can choose to send either the actual e-mail or a digitally processed (sometimes referred
to as hashed) summary of the e-mail that removes all content, headers, and personally
identifiable information from the message. Sending the entire message enables complete
analysis of the contents; sending a digitally processed summary of the message ensures
complete privacy.
To report junk e-mail:
2. In the junk e-mail filter toolbar:
To send the junk e-mail itself, click ZoneAlarm Options, then choose Report
Junk E-mail.
To send a digitally processed summary of the junk e-mail, click Junk.
MailFrontier, a trusted ZoneAlarm partner, manages the Collaborative Filter
database for ZoneAlarm. You can view the full text of MailFrontiers privacy
policy at: http://www.mailfrontier.com/privacy.html
Chapter 9: E-mail protection Reporting phishing e-mail
3. In the Contribute E-mail dialog box, click OK.
The junk e-mail filter reports the junk e-mail to the Collaborative Filter database and
moves the message to the special Outlook folder ZoneAlarm Junk Mail.
Reporting phishing e-mail
The junk e-mail filter allows you to report instances of phishing e-mail referred to as
phishing) to ZoneAlarm. When phishing mail is detected for the first time, a popup
appears, asking if you would like to send the phishing mail to ZoneAlarm for analysis. If
you choose Yes, all future phishing messages will be sent without prompting you for
confirmation. If you choose No, your choice will be reflected in the Configure
Preferences dialog box.
The junk e-mail filter never sends e-mail of any type from your computer without your
permission. When you report phishing e-mail, the junk e-mail filter forwards the
complete and original message to ZoneAlarm.
ZoneAlarm never divulges your e-mail address, name or other personal information
contained in a phishing e-mail except as required to investigate and prosecute the
originator of the phishing message.
ZoneAlarm forwards selected portions of the reported message to government and law
enforcement agencies with jurisdiction over e-mail fraud. These agencies are required by
law to protect the confidentiality of the information contained in the message.
ZoneAlarm separately informs individuals or institutions threatened by forwarding to
them only the information required to alert them.
To report phishing e-mail:
2. In the junk e-mail filter toolbar, click ZoneAlarm Options, then choose Report
Phishing E-mail.
3. In the Contribute E-mail dialog box, click OK.
The junk e-mail filter reports the phishing e-mail to ZoneAlarm and moves the
message to the special Outlook folder ZoneAlarm Phishing Mail. If you are using
To restore e-mail that was incorrectly identified as junk, select the e-mail in the
ZoneAlarm Junk Mail folder, and click Unjunk. The e-mail will be restored to
your Outlook Inbox.
Chapter 9: E-mail protection Specifying junk e-mail message options
Outlook to access Hotmail, you must use the junk e-mail filters spam blocking
features and special folders instead of Hotmails.
Specifying junk e-mail message options
The junk e-mail filter uses three message filtering techniques: collaborative filter, message
filters, and foreign language filters. Filter settings determine how messages are treated
when received from unknown senders.
Collaborative Filter
Collaborative filtering uses information extracted from junk e-mail reported by you and
other ZoneAlarm security software users to determine whether new messages received
from unknown users is spam.
Message Filters
Message filters use heuristic rules to analyze e-mail for characteristics common to
various types of junk e-mail.
Foreign language filters
Foreign language filters block e-mail containing non-european languages. (The junk
e-mail filter automatically manages e-mail in common european languages such as
French, German, or Spanish.)
To customize message filtering options:
2. In the junk e-mail filter toolbar, click ZoneAlarm Options|Configure Preferences
|Messages.
3. Click Close.
MailFrontier, a trusted ZoneAlarm partner, manages the processing of phishing
e-mail for ZoneAlarm. You can view the full text of MailFrontiers privacy policy
at: http://www.mailfrontier.com/privacy.html
Collaborative Filter In the area, move the slider to adjust the responsiveness to the
characteristics of junk e-mail reported by other ZoneAlarm security
software users.
Message Filters Move the slider to adjust the responsiveness to common junk e-
mail. You can also adjust the responsiveness to specific categories
of junk e-mail.
Language Filters In the area, click Configure then choose which languages to block.
Chapter 9: E-mail protection Challenging e-mail from unknown senders
Challenging e-mail from unknown senders
You can choose to have the junk e-mail filter reply to an e-mail from an unknown
sender with a challenge e-mail. Because junk e-mail seldom contains a valid return
address, an unanswered challenge confirms that the e-mail is probably junk.
The challenge e-mail instructs the recipient to click a button in the message to validate
that he or she was the author of the message. Clicking the button directs the junk e-mail
filter to move the e-mail from the special Outlook folder ZoneAlarm Challenged
Mail folder to your Outlook Inbox.
For messages from an unknown sender, you can choose whether to always send a
challenge e-mail, to send a challenge only when the incoming message appears to be
junk e-mail, or to never send a challenge. In addition you can customize the challenge
e-mail that is sent to users.
To enable challenge e-mails:
Preferences | Challenges.
3. In the Challenges area, use the slider to choose when to send a challenge e-mail.
4. To add a personal message to the standard challenge e-mail, click Personalize, type
your name and your personal message, then click OK.
High ZoneAlarm security software will challenge all e-mails that you receive
unless they are known as good to either you (on your allowed lists) or to
MailFrontier (known good senders).
Any e-mail message that is received and can be classified immediately
as junk gets sent directly to the ZoneAlarm Mail folder for later dele-
tion and does NOT get a challenge issued.
Low ZoneAlarm security software will challenge uncertain e-mail.
ZoneAlarm security software will only challenge e-mails that it cannot
determine with certainty are spam or are good. This is typically a small
percentage of the e-mail you receive.
Off Challenge e-mails will not be sent.
ZoneAlarm security software will not send challenge e-mails. Move the
slider up to turn on e-mail challenges to eliminate junk e-mail sent by
spammer computers.
Chapter 9: E-mail protection Specifying your outbound e-mail server
5. Click Close.
The junk e-mail filter moves the message to the ZoneAlarm Challenged Mail.
folder
Specifying your outbound e-mail server
To send challenge e-mails, the junk e-mail filter requires the ability to send e-mail. In
most cases the junk e-mail filter uses Outlooks default outbound mail server. If you
experience problems sending challenge e-mails, you may need to specify the name of
your outbound e-mail server.
To specify the name of an outbound e-mail server:
|Challenges.
3. In the Challenge Content area, click E-mail Server.
4. Type the name of your outbound e-mail server, then click OK.
5. Click Close.
Customizing junk e-mail filter settings
By default, the junk e-mail filter retains phishing e-mail messages in the ZoneAlarm
phishing Mail folder until you manually delete them. You can specify how long e-mail
messages are stored in the ZoneAlarm Junk Mail and ZoneAlarm Challenged Mail
folders, as well as automate fraud e-mail reporting, and configure wireless device
forwarding. In addition, if you could like to scan more than one Outlook Inbox, you can
specify those settings here.
To specify storage duration for junk e-mail:
|Settings.
3. In the Junk Folder Settings area, click Configure.
While waiting for the response to a challenge message, the junk e-mail filter
stores your e-mail address. As soon as the challenge has been completely
processed, the junk e-mail filter discards the address. If you experience
problems sending challenge e-mails, see Specifying your outbound e-mail
server, on page 156.
Chapter 9: E-mail protection Customizing junk e-mail filter settings
4. Type the number of days to retain suspected junk e-mail in the ZoneAlarm Junk
Mail and ZoneAlarm Challenged Mail folders.
The junk e-mail filter moves e-mail that has been in the folder for the specified
number of days without being validated into Outlooks Deleted Items folder.
5. Click Close.
To configure a wireless device:
1. Start your Outlook or Outlook Express e-mail program
Preferences | Settings.
3. In the Wireless Device Support area, click Configure.
4. In the ZoneAlarm Wireless Support dialog box, type the e-mail address of your
wireless device.
You can also choose to forward only e-mail headers, and to specify the number of
validate messages forwarded to your wireless device in a 24-hour period.
5. If you need to specify a non-default e-mail server, click E-mail Server, type the
name of your outbound e-mail server, then click OK.
Click Close to save your changes.
To enable automatic reporting of phishing e-mail:
3. In the Auto Report Fraud E-mail area, select the Enable auto reporting... check
box.
4. Click Close.
To customize confirmation messages:
3. In the Show Confirmations area, specify the settings you want.
4. Click Close.
Contribute Junk Email Displays an alert prior to sending junk
e-mail to ZoneAlarm.
Contribute Phishing Email Displays an alert prior to sending
phishing e-mail to ZoneAlarm.
Chapter 9: E-mail protection Restoring e-mail incorrectly identified as junk
To configure multiple Outlook inboxes:
3. In the Outlook Multiple Inbox Support area, select the check box Support
scanning of multiple Inbox in Microsoft Outlook.
Restoring e-mail incorrectly identified as junk
The junk e-mail filter adds three special folders to your Outlook folder list: ZoneAlarm
Challenged Mail, ZoneAlarm Junk Mail, and ZoneAlarm Phishing Mail. When
ZoneAlarm security software identifies an e-mail message as junk, fraudulent, or
challenged, it puts the message in one of these special folders.
If you are using Outlook to access Hotmail, you must use the junk e-mail filters spam
blocking features and special folders instead of Hotmails.
You can restore mail that the junk e-mail filter incorrectly placed in a special folder to
your Outlook Inbox.
To restore e-mail incorrectly identified as junk:
1. In your Outlook or Outlook Express e-mail program, in the ZoneAlarm
Challenged Mail, ZoneAlarm Junk Mail, or ZoneAlarm Phishing Mail folder,
choose an e-mail.
2. In the junk e-mail filter toolbar, click Unjunk.
The junk e-mail filter restores the selected message to your Outlook Inbox.
Viewing junk e-mail filter reports
Use the junk e-mail filters Reports panel to view a summary of mail processing activity.
To view junk e-mail filter reports
1. Start your Outlook or Outlook Express e-mail program
Preferences | Reports.
3. Choose one of the four report types:
This feature is supported for Outlook 2000, 2002 (XP), and 2003 only and is
enabled by default.
Junk by Day The total number of legitimate and junk e-mails received by day.
Reasons The reasons the junk e-mail filter blocked incoming e-mails by day
Chapter 9: E-mail protection Viewing junk e-mail filter reports
4. Click Close to close the Reports panel.
Total History Junk
by Day
The total number of legitimate and junk e-mails received since
ZoneAlarm security software was installed.
Total Reasons The total number of reasons the junk e-mail filter blocked incom-
ing e-mails since ZoneAlarm security software was installed.
Chapter
160
10
Identity protection
With the rise of e-commerce, electronic record keeping,
and mass financial mailings, the incidence of identity theft
has increased in recent years. Hackers can use malware to
intercept your personal information online, while thieves
can steal CDs and laptops containing customer informa-
tion, or they can intercept sensitive mail items (such as
pre-approved credit card offers) that include personal data.
ZoneAlarm security software helps protect your personal
data online and out in the everyday world. ID Lock keeps
your personal information safe from hackers and identity
thieves. The ZoneAlarm Identity Protection Center offers
resources that help you prevent, detect, and, if necessary,
recover from identity theft.
Topics:
Understanding the ID Lock feature, on page 160
About myVAULT, on page 163
Using the Trusted Sites list, on page 166
Identity Protection Center, on page 168
Understanding the ID Lock feature
Every time you or someone else using your computer enters personal information into an e-
mail message or Web formsuch as your credit card number, address, or social security
Chapter 10: Identity protection How your personal information is protected
number it is possible that the information could be stolen. To help prevent that from
happening, the ID Lock ensures that your personal information is only sent to sites you
trust.
The ID Lock feature provides a secure area called myVAULT, where you can store
personal information that you want to protect. The contents of myVAULT are blocked
from being transmitted to unauthorized destinations, whether by you, someone else
using your computer, or by a Trojan horse attempting to transmit your personal
information.
How your personal information is protected
Setting the ID Lock protection level
How your personal information is protected
ZoneAlarm security software prevents your personal information from being
transmitted without your authorization, whether in e-mail or on the Web.
E-mail transmission
When you or someone using your computer attempts to send myVAULT data in an e-
mail message, ZoneAlarm security software displays an alert asking you whether to
allow the information to be sent. If you want to always allow or always block the
information from being sent to this destination, before clicking Yes or No select the
check box labeled Do you want to remember this answer... to add the destination
to your Trusted Sites list with the corresponding permission set automatically. For
example, if you were to select the Do you want to remember this answer... check box
and then click Yes, the destination would be added to the Trusted Sites list with the
permission set to Allow. Conversely, if you were to click No, the permission would be
set to Block.
Web transmission
When transmitting myVAULT data on the Web, ZoneAlarm security software allows or
blocks the transmission according to the permission for the domain in the Trusted Sites
list. As with e-mail transmission of myVAULT contents, if you choose to remember
your response to an ID Lock alert for a particular Web site, that Web site will be added
to the Trusted Sites list automatically with the permission set accordingly.
When responding to an ID Lock alert that is the result of an e-mail transmission,
clicking the Do you want to remember this answer... check box adds the
domain of the intended recipients e-mail servernot the e-mail recipientto
the Trusted Sites list. For example, if you were to allow myVAULT data to be
transmitted to your contact [email protected], and you chose to remember that
answer, the next time myVAULT data is sent to ANY contact on example.coms e-
mail server, the transmission would be allowed and you would not see an alert.
Chapter 10: Identity protection Setting the ID Lock protection level
IM transmission
When transmitting myVAULT data in an Instant Messaging conversation, ZoneAlarm
security software prevents the information from being received.
Figure 10-1 shows an instant messaging conversation in which information that is
stored in myVAULT is transmitted. The description of the item stored in myVAULT (in
this example, My Visa Card) appears in brackets.
Figure 10-1: Transmission of myVAULT contents
Figure 10-2 shows how the transmitted information is displayed to the recipient. The
protected information is replaced with asterisks so that it is unreadable.
Figure 10-2: Receipt of myVAULT contents
Setting the ID Lock protection level
The ID Lock is disabled by default. By enabling the ID Lock, you ensure that the data
entered in myVAULT will be protected.
ZoneAlarm security software keeps track of the number of items stored in myVAULT
and displays the number of times your information was protected.
To set the ID Lock protection level:
1. Select Identity Protection.
Chapter 10: Identity protection About myVAULT
2. In the Identity Lock area, specify the desired protection level.
About myVAULT
The myVAULT feature provides a secure area for entering your critical personal data
data that you want to protect from hackers and identity thieves. When it detects an
attempt to send data stored in myVAULT to a destination, ZoneAlarm security software
determines whether the information should be blocked or allowed. By default,
ZoneAlarm security software encrypts myVAULT data as it is entered, storing only the
hash value of the data rather than the data itself. Encrypting the data keeps your
information secure, as data cannot be retrieved using the hash value.
Adding data to myVAULT
Editing and removing myVAULT contents
Adding data to myVAULT
While you can store any type of information in myVAULT, it is a good idea only to store
information that you wish to keep secure, such as credit card numbers and identification
information. If you were to store information such as your country of residence (for
example, Canada) in myVAULT separately from the rest of your address, any time you
typed Canada into an online Web form, ZoneAlarm security software would block
transmission of the data.
To add information to myVAULT:
1. Select Identity Protection|myVAULT.
High Prevents the contents of myVAULT from being sent to unauthorized
destinations. ZoneAlarm security software will block transmission of
your data silently. If you are using a shared computer, this setting is
recommended for maximum security.
Medium Alerts you when your identity information is about to be sent to desti-
nations not listed on the Trusted Sites list. This is the default setting.
Off Identity protection is disabled. The contents of myVAULT can be sent
to any destination, whether or not it appears on the Trusted Sites list.
If youre unsure of the type of information that should be entered into myVAULT,
refer to the pre-defined categories for guidance. To access the list of categories,
select Identity Protection | myVAULT, then click Add.
Chapter 10: Identity protection Adding data to myVAULT
2. Click Add.
The Add information to myVAULT dialog box will appear.
For maximum protection, ZoneAlarm security software encrypts myVAULT data by
default. If you do not want to encrypt the data as you enter it, clear the Use one-way
encryption... check box.
3. Type a description of the item you are adding.
4. Select a category from the drop-down list.
ZoneAlarm security software displays the item description in ID Lock alerts. Be
sure that the description you enter is different from the value of the item to be
protected. If the information to be protected and the description contain some or
all of the data, you may receive multiple ID Lock alerts.
Access PIN Personal access code or other ID number. Maximum of 6
characters. For added security, Access PINs are always
encrypted.
Address Maximum 30 characters.
American Express card For added security, ZoneAlarm security software does not
record the last 5 digits of your American Express card
number.
Bank account Maximum 14 characters.
Credit card For added security, ZoneAlarm security software does not
record the last 4 digits of your credit card number.
Drivers license Maximum 15 characters.
eBay password The password you use to access the eBay Web site. Your
eBay password can only be sent to eBay. Maximum 20
characters.
E-mail Address Maximum 60 characters.
International tax ID Maximum 15 characters.
Mothers maiden name Maximum 30 characters.
Name Maximum 30 characters.
Passport number US passport number or other International ID number.
Maximum 30 characters.
Password Enter the password to be protected. Maximum 20 charac-
ters.
Phone Separators such as parentheses and dashes are not
allowed. Maximum 13 characters.
US Social Security number Requires 9 digits.
Chapter 10: Identity protection Editing and removing myVAULT contents
5. Type the data to be protected.
Asterisks will appear in place of the data you entered and an encrypted form of your
data will be stored in myVAULT. ZoneAlarm security software will compare the
encrypted data with your outgoing messages.
6. Specify whether you want the information to be protected when using Web, E-mail,
and Instant Messengers (if available in your version of the product).
7. Click OK to save your changes.
Editing and removing myVAULT contents
In the myVAULT panel you can modify the encryption setting, remove myVAULT
contents, and edit unencrypted data. Because encrypted data is displayed in asterisks, it
is unreadable and therefore cannot be edited.
To edit myVAULT contents:
1. Select Identity Protection|myVAULT.
2. Select the item you want to edit, then click Edit.
The Edit information from myVAULT dialog appears.
3. Modify data as necessary, then click OK to save your changes.
Other Use this field to enter items that either do not correspond
to any of the pre-configured categories, or which exceed
the character limit for the corresponding category. Maxi-
mum 30 characters.
Data encryption is enabled by default. If you do not want to encrypt your data,
clear the Use one-way encryption... check box. Because of the sensitive nature of
the data, PIN numbers, passwords, the last four digits of your social security
number, and the last four digits of your credit card numbers will always be
displayed as asterisks, whether or not you choose to encrypt them.
To disable the encryption confirmation that appears by default, select Identity
Protection | myVAULT, then click Options. Clear the Show encryption confirmation
check box.
Chapter 10: Identity protection Using the Trusted Sites list
To remove myVAULT contents:
Using the Trusted Sites list
The myVAULT feature provides a secure area for entering your critical personal data
data that could be used by hackers and identity thieves. When it detects an attempt to
send data stored in myVAULT to a destination, ZoneAlarm security software
determines whether the information should be blocked or allowed, by making sure the
destination is one you trust.
There are two kinds of sites that can appear on the Trusted Sites list: Security Alliance
and Custom. Security Alliance sites are sites that ZoneAlarm, a Check Point Software
Technologies, Inc. Company has authenticated to ensure they are not fraudulent.
Custom sites are sites you add to the list.
Viewing the Trusted Sites list
Adding to the Trusted Sites list
Editing and removing trusted sites
Select the item you want to remove, then click Remove.
If you remove the last item in myVAULT, the ID Lock protection level will be set
to Off. If you later add items to myVAULT, the protection level will be reset to the
default Medium setting.
Chapter 10: Identity protection Viewing the Trusted Sites list
Viewing the Trusted Sites list
In addition to listing sites you trust with your personal information, you can add sites to
the list that you explicitly do not want to trust, such as known spam or chat sites, and
prevent information from being sent to them.
To see the Trust Sites list, select Identity Protection|Trusted Sites. The Add Trusted
Site dialog appears.
The Trusted Sites list also lets you specify which sites are allowed to send your password
as clear text. Because clear-text passwords are unencrypted, they can easily be viewed by
others if intercepted during transmission.
Figure 10-3: Trusted Sites list
Access permission
Specifies whether ZoneAlarm security software will allow, block, or alert you before
sending myVAULT contents to the listed destinations. To modify the permission for a
site, click beside the site in the Access column and choose Allow, Block, or Ask.
Site
Displays the domain of the site.
Type
Specifies whether the site is a Security Alliance partner or a Custom site.
Clear Text password
Specifies whether ZoneAlarm security software will allow, block, or alert you before
sending your password as clear text to the listed destinations. To modify the permission
for a site, click beside the site in the Clear Text password column and choose Allow,
Block, or Ask.
Site Entry Details
In addition to the site name and type, the Entry Details box displays the site IP Address
and the date and time you last accessed the site.
Access Permission
Clear text password
permission
Chapter 10: Identity protection Adding to the Trusted Sites list
Adding to the Trusted Sites list
There are two types of sites that appear on the Trusted Sites list: Custom and Security
Alliance. Custom sites are sites that you add to the list. Security Alliance partner sites are
sites that ZoneAlarm has verified are legitimate and has added automatically.
Custom sites are trusted at the domain level, therefore each sub-domain you want to
trust must be added separately. For example, www.msn.com and shopping.msn.com
would need to be added separately. Security Alliance sites explicitly trust all sub-
domains, so you do not need to create an entry for each sub-domain you want to trust.
To add a site to the Trusted Sites list:
1. Select Identity Protection|Trusted Sites, then click Add.
The Add Trusted Site dialog appears.
2. Type the URL of the site (omit http://www), then click OK.
After you click OK, ZoneAlarm security software verifies the site address and
records the IP address. This process can take several seconds.
3. Modify the site permissions as desired.
By default, access and clear text password permissions for Custom sites are set to
Ask.
Editing and removing trusted sites
In the Trusted Sites panel, you can modify the access permission for a site, and edit or
remove Custom sites. Although you can modify the permissions for Security Alliance
partner sites, you cannot edit or remove the site entry.
To edit a Custom site:
1. Double-click the site you want to edit.
The Edit trusted site dialog appears.
2. Edit the site as necessary, then click OK to save your changes.
To remove a custom site:
Identity Protection Center
The ZoneAlarm Identity Protection Center is a Web site that helps you prevent, detect,
and, if necessary, recover from identity theft. (Identity theft is a crime in which someone
exploits your personal information for their own gain.) The Identity Protection Center
Right-click the site you want to remove, then click Remove.
Chapter 10: Identity protection Identity Protection Center
includes identity protection tips as well as resources for monitoring the use of your
personal information and for recovering from identity theft.
To visit the Identity Protection Center:
1. Go to Identity Protection.
2. In the Identity Protection Center area, click Go to ZoneAlarm Identity Protection
Center.
Identity protection Identity Protection Center
Identity protection Identity Protection Center
Chapter
172
11
Hard Drive Encryption for Laptops
Encrypting your hard drive is important because if your
computer is lost or stolen, a hacker can remove your drive
and read it without even knowing your Windows logon
name and password. But, if your drive is encrypted, your
sensitive data is protectedthieves are locked out of it.
Topics:
Do I need Hard Drive Encryption for Laptops?, on page 172
Using Hard Drive Encryption for Laptops, on page 173
Installing Hard Drive Encryption for Laptops, on page 174
Hard Drive Encryption Main panel, on page 175
Hard Drive Encryption Advanced panel, on page 176
Troubleshooting Hard Drive Encryption, on page 177
Do I need Hard Drive Encryption for
Laptops?
Not everyone needs to encrypt their hard drive, but full hard drive encryption is ideal for:
anyone who has identity information, such as tax forms or financial account data, on
their laptop and thinks there is a risk of their laptop being lost or stolen (e.g., while
traveling or in public places)
Chapter 11: Hard Drive Encryption for Laptops Using Hard Drive Encryption for Laptops
small business owners and others who have proprietary or private data, such as client
files, on their laptop
What is Hard Drive Encryption?
Hard Drive Encryption makes everything on your computer unreadable to
unauthorized users. Your own encryption password is required before your computer
fully boots up. Your full hard disk is encrypted, including deleted and temporary files,
which protects your sensitive data if your disk is stolen or lost. This prevents hackers
from breaking into your operating system by removing your disk and using bypass tools
or alternative boot media.
Using Hard Drive Encryption for Laptops
Hard Drive Encryption is not available until you install it from Additional Services in
the ZoneAlarm window. (Some versions of the product do not include the option to
install this feature.)
How does it affect my day-to-day computer usage?
Another login at startup: Before your Windows login screen appears, you log in to a
Hard Drive Encryption screen when you start your computer. This gives you secure
access to your encrypted operating system.
The rest is silent and invisible: Your files and desktop are silently decrypted when
you access them and encrypted when you close them, but this process is invisible to
you.
Topics:
Do I need Hard Drive Encryption for Laptops?, on page 172
Installing Hard Drive Encryption for Laptops, on page 174
Creating your recovery disk, on page 175
Hard Drive Encryption Main panel, on page 175
Hard Drive Encryption Advanced panel, on page 176
Troubleshooting Hard Drive Encryption, on page 177
When your disk is encrypted, your computer will be able to go into sleep mode,
but not hibernation mode.
Chapter 11: Hard Drive Encryption for Laptops Installing Hard Drive Encryption for Laptops
Installing Hard Drive Encryption for
Laptops
If you have a license that supports Hard Drive Encryption, you can install it from the
ZoneAlarm window.
To install or reinstall Hard Drive Encryption for Laptops:
1. Back up copies of your valued files.
2. Have a CD, floppy disk, or blank USB stick on hand for recovery disk creation.
3. Select Hard Drive Encryption under the Additional Services side panel.
The installation and recovery disk wizards will appear in sequence and step you
through:
Creating an account for support, and then one for logging in to Hard Drive
Encryption.
Installation and restart.
Creating your recovery disk. See Creating your recovery disk, on page 175.
After installation and recovery disk creation, there is nothing you need to configure.
Hard Drive Encryption automatically encrypts all internal hard drives, but does not
encrypt any external hard drives.
During encryption:
Encryption starts automatically and runs in the background. It may take a few hours for
full encryption to complete. You can use your laptop and turn it on and off during this
process, though decryption pauses while your computer is off.
If you create your recovery disk with a CD, you will need CD-burning software that
supports burning an ISO image. Some CD-burning applications do not have ISO-
burning capability. To find one that does, try searching trusted online software
download sources (for example, http://download.cnet.com/ ) with the search text
free software to burn ISO.
Hard Drive Encryption for Laptops Hard Drive Encryption Main panel
Hard Drive Encryption Main panel
Main panel options:
Creating your recovery disk
Hard Drive Encryption for Laptops does not start encrypting until you create a
recovery disk with the Recovery Wizard.
Why do you need to use the Recovery Disk Wizard?
To create a way to decrypt in case of system failure: You need to create a
recovery disk because its the only way you will be able to access everything on your
disk if you experience a system failure that blocks you from accessing the Hard Drive
Encryption login screen. The recovery disk lets you decrypt your locked disk so
you can retrieve your data.
In case you ever forget your Hard Drive Encryption password: You need to
upload data to the support team, as this is the only way you will be able to reset your
Hard Drive Encryption password if you forget it. You can only upload this data with
the Recovery Wizard.
To create a recovery disk:
1. Have a blank CD, floppy disk, or USB memory stick ready, and make sure that your
computer supports copying or burning to it.
2. If the Recovery Wizard is not already open:
Click Hard Drive Encryption in the navigation bar, and then click Run the
Recovery Wizard.
3. In the Recovery Wizard, follow the instructions and prompts that appear.
On the final Create Recovery Disk step, what you do depends on what media you
are using:
Run the
Recovery Disk
Wizard
Steps you through creating a recovery disk. If you change your pass-
word you need to then create a new recovery disk because your new
authentication must be incorporated into your recovery media. See
Creating your recovery disk, on page 175.
Encryption
Status bar
Shows the progress and completion of encryption after you install Hard
Drive Encryption for Laptops. See The Encryption Status bar, on
page 176.
Floppy or USB Choose the inserted floppy disk or USB stick from the drop-down
menu.
The Recovery Wizard copies a disk image to the floppy or USB stick.
Hard Drive Encryption for Laptops The Encryption Status bar
4. Put your recovery disk in a safe, secure place.
If you ever need to use your recovery disk to decrypt and recover data, insert the
disk, restart your computer, and then follow the instructions that appear.
The Encryption Status bar
The Encryption Status bar on the Hard Drive Encryption | Advanced panel in
ZoneAlarm shows the progress and completion of encryption after you install Hard
Drive Encryption.
Encryption takes place in the background and does not affect your system experience.
While individual files and your desktop are invisibly decrypted on access and encrypted
when you close them, the Encryption Status bar maintains a 100% status to indicate you
have full encryption protection.
Hard Drive Encryption Advanced panel
Advanced panel options:
CD ISO
images
When you are finished with the Recovery Wizard, select the ISO image
you saved and burn it to CD with your CD burning software.
If your CD-burning program does not have ISO-burning capability, you
can find one that does. Try searching trusted online software download
sources (for example, http://download.cnet.com/ ) with the search text
free software to burn ISO.
Its a good idea to print out How to decrypt in case of system failure, on
page 178 and keep it with your recovery disk.
Remove
Hard Drive
Encryption
Removes Hard Drive Encryption and decrypts your system. You can
reinstall at any time. See Stopping or removing Hard Drive Encryp-
tion, on page 177
Hard Drive Encryption for Laptops Stopping or removing Hard Drive Encryption
Stopping or removing Hard Drive Encryption
If Hard Drive Encryption is installed, its active on your system. There is no on or off
button for it, but you can remove it and reinstall it at any time.
To remove Hard Drive Encryption:
1. Open ZoneAlarm by right-clicking the ZoneAlarm icon in the system tray.
2. Go to the Hard Drive Encryption | Advanced panel.
3. Click the Remove Hard Drive Encryption button.
Decryption starts, and progress is shown on the Hard Drive Encryption panel.
Decryption may take a few hours, and after that Hard Drive Encryption will
be completely uninstalled. You can use your computer and turn it on and off
during this process, though decryption pauses when your computer is off.
Troubleshooting Hard Drive Encryption
Topics:
What to do if you forget your password or username:, on page 178
How to decrypt in case of system failure, on page 178
Stopping or removing Hard Drive Encryption, on page 177
Even if you uninstall ZoneAlarm, Hard Drive Encryption remains installed so that
your system is still encrypted.
To uninstall Hard Drive Encryption, use the Remove function on the Hard Drive
Encryption panel.
You can reinstall at anytime by clicking Hard Drive Encryption under Additional
Services.
Tip: Check the ZoneAlarm Readme for Known Issues and workarounds: From the
Windows Start menu, choose All Programs | ZoneAlarm | Readme. See the Hard
Drive Encryption section.
Hard Drive Encryption for Laptops What to do if you forget your password or username:
What to do if you forget your password or username:
If you forget your Hard Drive Encryption login credentials:
Click the Help button on the Hard Drive Encryption login screen. Use the contact
information that appears. We will authenticate your identity with the security
questions you created during installation, and help you regain access to your
computer.
Tips:
How to decrypt in case of system failure
If your hard drive crashes and you need to recover the data on your disk but cant access
the login screen, you can decrypt your data with the recovery disk you prepared with the
Recovery Wizard.
To decrypt when you need to recover your data:
1. Locate the recovery disk you created.
2. Insert your recovery disk and restart your computer.
3. Follow the instructions that appear.
Because it is a pre-boot environment, use the Tab key to move the cursor and
press Enter to make a selection. (The mouse wont work.)
Once decryption starts, the percentage of the decryption is displayed. It can take
up to a few hours to complete.
When decryption is complete, youll be prompted to reboot.
If you forget
your username
By default, your username is the same as your Windows logon user-
name.
If you havent
completed the
upload step in
the Recovery
Disk Wizard
Get help through support live chat at http://www.zonealarm.com/chat.
If a system crash locks you out of access to your login screen, you need to use
your recovery disk to decrypt your drive in order to recover your files.
Tip: Print these steps and keep them with your recovery disk.
If you lost your Hard Drive Encryption recovery disk, contact support at http://
www.zonealarm.com/chat.
Hard Drive Encryption for Laptops How to decrypt in case of system failure
4. Be sure to eject the recovery disk before you power back up.
5. To reactivate Hard Drive Encryption, you need to:
First, remove it. See Stopping or removing Hard Drive Encryption, on page 177.
Then, reinstall it from under Additional Services.
After you power down, eject the recovery disk, otherwise youll be booted into the
recovery environment again.
Hard Drive Encryption for Laptops How to decrypt in case of system failure
Chapter
181
12
Managing Alerts and Logs
Whether youre the type of person who wants to know ev-
erything that happens on your computeror you only want
to know that your computer is secure, ZoneAlarm security
software accommodates you. You can be notified by an
alert each time ZoneAlarm security software acts to protect
you, or only when an alert is likely to have resulted from
hacker activity. You can also choose to log all alerts, only
high-rated alerts, or alerts caused by specific traffic types.
Topics:
Understanding alerts and logs, on page 182
Setting basic alert and log options, on page 182
Controlling the number of alerts, on page 183
Setting event and program log options, on page 184
Using SmartDefense Advisor and Hacker ID, on page 191
Chapter 12: Managing Alerts and Logs Understanding alerts and logs
Understanding alerts and logs
Understanding and reducing alerts
To learn about the various kinds of ZoneAlarm security software alerts you may see, see
Chapter 4,Understanding and reducing alerts, starting on page 59.
Understanding the alerts and logs panel
ZoneAlarm security software alert and logging features keep you aware of whats
happening on your computer without being overly intrusive, and enable you to go back
at any time to investigate past alerts.
Expert rule options let you track not only blocked Internet traffic, but allowed traffic as
well, giving advanced users the option of maximum information for customizing
security rules for their environment.
About event logging
By default, ZoneAlarm security software creates a log entry every time traffic is blocked,
whether an alert is displayed or not. Log entries record the traffic source and
destination, ports, protocols, and other details. The information is recorded to a text file
named ZALOG.txt, stored in the Internet Logs folder. Every 60 days, the log file is
archived to a dated file so that it doesnt become too large.
You can choose to prevent specific categories of events from being loggedfor
example, you may want to create log entries only for firewall alerts, or suppress entries
for a particular type of Program alert. You can also have ZoneAlarm security software
log specific types of traffic you have decided to allow, by creating expert rules with
tracking features enabled.
Setting basic alert and log options
Basic alert and log options let you specify the type of event for which ZoneAlarm
security software displays an alert and for which events it creates a log entry.
Setting the alert event level
Setting event and program logging options
For information about suppressing most alerts while playing games on your
computer, see Game Mode, on page 193.
Chapter 12: Managing Alerts and Logs Setting the alert event level
Setting the alert event level
The Alert Events Shown control, in the main panel of Alerts & Logs, lets you control
the display of alerts by rating. Program and ID Lock alerts are always displayed, because
they ask you to decide whether to grant permission.
To set the alert event level:
1. Select Alerts & Logs.
2. In the Alert Events Shown area, select the desired setting.
Setting event and program logging options
Use the Event Logging and Program Logging areas to choose what types of
informational alerts and program alerts will be logged.
To enable or disable event logging and program logging:
2. In the Event Logging area, select the desired setting.
3. In the Program Logging area, specify the log level.
Controlling the number of alerts
You can specify whether you want to be alerted to all security and program events, or if
you only want to be notified of events that are likely a result of hacker activity.
If you want to suppress most alerts while playing a computer game, see Game
Mode, on page 193.
High Displays an alert for every security event that occurs, both high-rated
and medium-rated.
Med Displays only high-rated alerts, which are most likely a result of hacker
activity.
Off Displays Program and ID Lock alerts only. Informational alerts are not
displayed.
On Creates a log entry for all events.
Off No events are logged.
High Creates a log entry for all program alerts.
Med. Creates a log entry for high-rated program alerts only.
Off No program events are logged.
Chapter 12: Managing Alerts and Logs Showing or hiding firewall and program alerts
For details about how to reduce certain types of alerts, and why each alert happens,
see Understanding and reducing alerts, on page 59.
Showing or hiding firewall and program alerts
The Alert Events panel gives you more detailed control of alert display by allowing you
to specify the types of blocked traffic for which Firewall and Program alerts are
displayed.
To show or hide firewall or program alerts:
1. Select Alerts & Logs, then click Advanced.
The Alert & Log Settings dialog appears.
2. Select the Alert Events panel.
3. In the Alert column, select the type of blocked traffic for which ZoneAlarm security
software should display an alert.
Setting event and program log options
You can specify whether ZoneAlarm security software keeps record of security and
program events by enabling or disabling logging for each type of alert.
Formatting log appearance
Customizing event logging
Customizing program logging
Viewing log entries
Viewing the text log
Archiving log entries
Formatting log appearance
Use these controls to determine the field separator for your text log files.
To format log entries:
The Advanced Alerts and Log Settings dialog appears.
2. Select the Log Control panel.
Chapter 12: Managing Alerts and Logs Customizing event logging
3. In the Log Archive Appearance area, select the format to be used for logs.
Customizing event logging
By default, ZoneAlarm security software creates a log entry when a high-rated firewall
event occurs. You can customize Firewall alert logging by suppressing or allowing log
entries for specific security events, such as MailSafe quarantined attachments, Blocked
non-IP packets, or Lock violations.
To create or suppress log entries based on event type:
2. Click Advanced.
The Advanced Alerts and Logs dialog box appears.
3. Select Alert Events.
4. In the Log column, select the type of event for which ZoneAlarm security software
should create a log entry.
6. Click OK to close the Alert & Log Settings dialog.
Customizing program logging
By default, ZoneAlarm security software creates a log entry when any type of Program
alert occurs. You can customize Program alert logging by suppressing log entries for
specific Program alert types, such as New Program alerts, Repeat Program alerts, or
Server Program alerts.
To create or suppress log entries based on event type:
2. In the Program Logging area, click Custom.
3. In the Program Logs column, select the type of event for which ZoneAlarm security
software should create a log entry.
5. Click OK to close the Alert & Log Settings dialog.
Tab Select Tab to separate fields with a tab character.
Comma Select Comma to separate fields with a comma.
Semicolon Select Semicolon to separate log fields with a semicolon.
Chapter 12: Managing Alerts and Logs Viewing log entries
Viewing log entries
You can view log entries two ways: in a text file using a text editor, or in the Log Viewer.
Although the format of each type of log differs slightly, the general information
contained in the log is the same.
To view the current log in the Log Viewer:
2. Select the number of alerts to display (from 1 to 999) in the alerts list.
You can sort the list by any field by clicking the column header. The arrow (^) next to
the header name indicates the sort order. Click the same header again to reverse the
sort order.
3. Select the type of alert you want to view:
Anti-virus Displays the Date/Time, Type, Virus Name, File Name, Action Taken,
Mode, and E-mail Info columns.
Firewall Displays the Rating, Date/Time, Type, Protocol, Program, Source IP,
Destination IP, Direction, Action Taken, Count, Source DNS, and Des-
tination DNS columns.
OSFirewall Displays the Rating, Date/Time, Type, Subtype, Data, Program, Direc-
tion, Action Taken, and Count columns.
Program Displays the Rating, Date/Time, Type, Program, Source IP, Destination
IP, Direction, Action Taken, Count, Source DNS, and Destination DNS
columns.
Spy Site
Blocking
Displays the Date/Time and the site that was blocked.
The Log Viewer shows security events that have been recorded in the ZoneAlarm
security software log. To view details of Log Viewer fields for each alert type,
refer to the Firewall, Program Control, and Anti-virus chapters.
Field Information
Description A description of the event.
Direction The direction of the blocked traffic. Incom-
ing means the traffic was sent to your com-
puter. Outgoing means the traffic was sent
from your computer.
Type The type of alert: Firewall, Program, ID Lock,
or Lock Enabled.
Table 12-1: Log viewer fields
Chapter 12: Managing Alerts and Logs Viewing log entries
Source DNS The domain name of the computer that sent
the traffic that caused the alert.
Source IP The IP address of the computer that sent the
traffic that ZoneAlarm security software
blocked.
Rating Each alert is high-rated or medium-rated.
High-rated alerts are those likely to have
been caused by hacker activity. Medium-
rated alerts are likely to have been caused by
unwanted but harmless network traffic.
Protocol The communications protocol used by the
traffic that caused the alert.
security software.
Destination DNS The domain name of the intended addressee
of the traffic that caused the alert.
Destination IP The address of the computer the blocked
traffic was sent to.
Count The number of times an alert of the same
type, with the same source, destination, and
protocol, occurred during a single session.
Date/Time The date and time the alert occurred.
Program The name of the program attempting to send
or receive data. (Applies only to Program and
ID Lock alerts).
Field Information
Table 12-1: Log viewer fields
Chapter 12: Managing Alerts and Logs Viewing the text log
Viewing the text log
By default, alerts generated by ZoneAlarm security software are logged in the file,
ZAlog.txt. If you are using Windows95, Windows98 or Windows Me, the file is located in
the following folder: (x):\Windows\Internet Logs. If you are using WindowsNT or
Windows2000, the file is located in the following folder: (x):\Winnt\Internet Logs.
To view the current log as a text file:
2. Click Advanced.
The Advanced Alerts & Log Settings dialog box opens.
In the Log Archive Location area, click View Log.
Chapter 12: Managing Alerts and Logs Viewing the text log
Text log fields
Log entries contain some combination of the fields described in the table below.
Field Description Example
Type The type of event recorded. FWIN
Date The date of the alert, in format yyyy/mm/dd 2001/12/31(December
31, 2001)
Time The local time of the alert. This field also dis-
plays the hours difference between local and
Greenwich Mean Time (GMT).
17:48:00 -8:00GMT (5:48
PM, eight hours earlier
than Greenwich Mean
Time. GMT would be
01:48.)
Virus Name The name of the virus that caused the event.
This field only appears for anti-virus events.
iloveyou
File name The name of the file that caused the event.
This field only appears for Anti-virus events.
iloveyou.exe
Action How the event was handled. The value for
this field will depend on the type of event
that occurred.
Anti-virus: Renamed
MailSafe: Quarantined
ID Lock: Blocked
Category The ID Lock category of information that was
detected in the event. This field only appears
for ID Lock events.
Access PIN
Program The program sending or receiving the e-mail
that contains the ID Lock information. This
field only appears for ID Lock events.
Outlook.exe
Source The IP address of the computer that sent the
blocked packet, and the port used; OR the
program on your computer that requested
access permission.
192.168.1.1:7138
Outlook.exe
Destination The IP address and port of the computer the
blocked packet was addressed to.
192.168.1.101:0
Chapter 12: Managing Alerts and Logs Archiving log entries
Archiving log entries
At regular intervals, the contents of ZAlog.txt are archived to a date-stamped file, for
example, ZALog2004.06.04.txt (for June 4, 2004). This prevents ZAlog.txt from
becoming too large.
To view archived log files, use Windows Explorer to browse to the directory where your
logs are stored.
To set archive frequency:
3. Select the Log Archive Frequency check box.
4. In the Log Frequency area, specify the log frequency (between 1 and 60 days), then
click Apply.
Specifying the archive location
The ZAlog.txt file and all archived log files are stored in the same directory.
To change the log and archive location:
2. Click Advanced.
The Advanced Alerts & Log Settings dialog box opens.
4. In the Log Archive Location area, click Browse.
Select a location for the log and archive files.
Transport The protocol (packet type) involved. UDP
Field Description Example
If the Log Archive Frequency check box is not selected, ZoneAlarm security
software continues to log events for display in the Log Viewer panel, but does not
archive them to the ZAlog.txt file.
Chapter 12: Managing Alerts and Logs Using SmartDefense Advisor and Hacker ID
Using SmartDefense Advisor and
Hacker ID
ZoneAlarm SmartDefense Advisor is a service that enables you to instantly analyze the
possible causes of an alert, and helps you decide how to respond. When available,
SmartDefense Advisor provides advice as to how to respond to Program alerts. If no
advice is available, click More Info in the alert to receive more information about the
alert. SmartDefense Advisor returns an article that explains the alert and gives you
advice on what, if anything, you need to do to ensure your security.
To determine the physical location and other information about the source IP address
or destination IP address in an alert, click the Hacker ID panel. This panel displays
available information about the IP address that was submitted.
To submit an alert to SmartDefense Advisor:
2. Right-click anywhere in the alert record you want to submit.
3. Select More Info from the shortcut menu.
If you are a frequent visitor to eBay, and you have received an ID Lock alert
blocking your eBay password, you can use SmartDefense Advisor to submit a
fraud report to eBay. To learn more about how ZoneAlarm security software
protects your eBay identity, see Creating an online fraud protection profile, on
page 17.
Chapter 12: Managing Alerts and Logs Using SmartDefense Advisor and Hacker ID
Chapter
193
13
Game Mode
Game Mode temporarily suppresses most ZoneAlarm secu-
rity software scans, product updates, and alerts, so that
you can play games on your computer with fewer interrup-
tions.
Topics:
Understanding Game Mode
Turning Game Mode On and Off
Understanding Game Mode
Game Mode minimizes interruptions while you play computer games by doing the
following:
Lets you temporarily allow or deny all program permission requests, so that requests are
answered without displaying alerts.
Postpones automatic scans and product updates.
Suppresses all Informational alerts and all alerts in which you are prompted to make a
decision. This includes:
Alerts caused by Ask settings in the Programs List, such as permission alerts triggered
by programs trying to send mail or act as servers.
OSFirewall alerts, which prompt you to allow or deny behavior considered unusual or
suspicious.
ID Lock alerts and Outbound Mailsafe alerts.
Game Mode settings do not override Block or Allow settings in your Programs List. If you
have configured ZoneAlarm security software to always block a specific program, it
Chapter 13: Game Mode Turning Game Mode On and Off
continues to block that program even if you activate Game Mode with a setting of
Allow.
Game Mode remains active until you turn it off, or until you turn off ZoneAlarm
security software or your computer.
See Turning Game Mode On and Off, on page 194.
Turning Game Mode On and Off
To turn Game Mode on:
1. Do one of the following:
Right-click the system tray icon, and choose Game Mode...
Or, under QuickTasks, click Set Gaming.
2. In the dialog that appears, choose one of the following:
Answer all alerts with allowPermission requests will be granted.
Answer all alerts with denyPermission requests will be denied.
See Understanding Game Mode, on page 193 for more information.
3. Leave the Activate Game Mode dialog open or minimize it, but do not close it.
While Game Mode is on, ZoneAlarm security software displays a special icon in the
system tray ( ).
The use of Game Mode may reduce the security of your system. If you choose to
allow all permission requests, you may increase the chances of a malicious
program harming your computer or gaining access to your data. If, on the other
hand, you choose to deny all requests, you may interrupt the functions of a
legitimate program.
You should activate Game Mode only for the duration of your game.
If you close the Activate Game Mode dialog, you turn Game Mode off.
Chapter 13: Game Mode Turning Game Mode On and Off
To turn Game Mode off:
Note that Game Mode is automatically deactivated if you turn off your computer or if
you turn off ZoneAlarm security software.
Do one of the following:
Close the Activate Game Mode dialog by clicking either Cancel or the
Close icon (x) at upper right.
Click Stop Game Mode in the Activate Game Mode dialog.
Right-click the system tray icon and choose Stop Game Mode.
Game Mode Turning Game Mode On and Off
Appendix
14
197
Troubleshooting
This chapter provides guidance for troubleshooting issues
you may encounter while using ZoneAlarm security soft-
ware.
Topics:
VPN, on page 197
Networking, on page 199
Internet Connection, on page 200
Anti-virus, on page 203
Hard Drive Encryption, on page 205
Third-party software, on page 205
VPN
If you are having difficulty using VPN software with ZoneAlarm security software, refer
to the table for troubleshooting tips provided in this section.
If... See...
You can't connect to your Virtual Private Net-
work (VPN)
Configuring ZoneAlarm security software for
VPN traffic, on page 198
You have created expert firewall rules VPN auto-configuration and expert rules,
on page 198
Table 14-1: Troubleshooting VPN problems
Appendix 14: Troubleshooting Configuring ZoneAlarm security software for VPN traf-
Configuring ZoneAlarm security software for VPN traffic
If you cannot connect to your VPN, you may need to configure ZoneAlarm security
software to accept traffic coming from your VPN.
To configure ZoneAlarm security software to allow VPN traffic:
1. Add VPN-related network resources to the Trusted Zone.
See Adding to the Trusted Zone, on page 40.
2. Grant access permission to the VPN client and any other VPN-related programs on
your computer.
See Setting permissions for specific programs, on page 101.
3. Allow VPN protocols.
See Adding a VPN gateway and other resources to the Trusted Zone, on page 30.
VPN auto-configuration and expert rules
If you have created expert firewall rules that block VPN protocols, ZoneAlarm security
software will not be able to automatically detect your VPN when you initiate a
connection. To configure your VPN connection, you will need to make sure that your
VPN client and VPN-related components are in the Trusted Zone, and that they have
permission to access the Internet. See Configuring your VPN connection, on page 27.
Automatic VPN detection delay
ZoneAlarm security software periodically polls your computer to determine if
supported VPN protocols are engaged. Upon detection, ZoneAlarm security software
prompts you to configure your connection automatically. If you have recently install a
VPN client and have tried to connect, ZoneAlarm security software may not have
detected your VPN configuration. If you prefer ZoneAlarm security software to
configure your connection automatically, you can wait ten minutes then, try connecting
again. If you prefer to connect right away, you can configure your connection manually.
See Configuring your VPN connection, on page 27.
You are using a supported VPN client and
ZoneAlarm security software does not detect
it automatically the first time you connect
Automatic VPN detection delay, on
page 198
If... See...
Table 14-1: Troubleshooting VPN problems
Appendix 14: Troubleshooting Networking
Networking
If you are having difficulty connecting to your network or using networking services,
refer to the table for troubleshooting tips provided in this section.
Making your computer visible on your local network
If you cant see the other computers on your local network, or if they cant see your
computer, it is possible that ZoneAlarm security software is blocking the NetBIOS
traffic necessary for Windows network visibility.
To make your computer visible on the local network:
1. Add the network subnet (or, in a small network, the IP address of each computer
youre sharing with) to your Trusted Zone. See Adding to the Trusted Zone, on
page 40.
2. Set the Trusted Zone security level to Medium, and the Internet Zone security level
to High. This allows trusted computers to access your shared files, but blocks all
other machines from accessing them. See Setting advanced security options, on
page 35.
Sharing files and printers across a local network
ZoneAlarm security software enables you to quickly and easily share your computer so
that the trusted computers youre networked with can access your shared resources, but
Internet intruders cant use your shares to compromise your system.
If ... See...
You cant see the other computers in your
Network Neighborhood, or if they cant see
you
Making your computer visible on your local
network, on page 199
You cant share files or printers over your
home or local network
Sharing files and printers across a local net-
work, on page 199
Your computer is on a Local Area Network
(LAN) and takes a long time to start up when
ZoneAlarm security software is installed
Resolving a slow start up, on page 200
Table 14-2: Troubleshooting network problems
ZoneAlarm security software will detect your network automatically and display
the New Network alert. You can use the alert to add your network subnet to the
Trusted Zone. For more information, see New Network alerts, on page 83.
Appendix 14: Troubleshooting Resolving a slow start up
To configure ZoneAlarm security software for secure sharing:
1. Add the network subnet (or, in a small network, the IP address of each computer
youre sharing with) to your Trusted Zone. See Adding to the Trusted Zone, on
page 40.
2. Set the Trusted Zone security level to Medium. This allows trusted computers to
access your shared files. See Choosing security levels, on page 34.
3. Set the Internet Zone security level to High. This makes your computer invisible to
non-trusted computers. See Setting the security level for a Zone, on page 34.
Resolving a slow start up
If ZoneAlarm security software is configured to load at startup, some users connected
to the LAN may find that it takes several minutes for the startup process to finish.
In most cases, this is because your computer needs access to your networks Domain
Controller to complete its startup and login process, and ZoneAlarm security software
is blocking access because the Controller has not been added to the Trusted Zone.
To solve this problem, add the host name or IP address of your networks Domain
Controller to the Trusted Zone.
Internet Connection
If you are having difficulty connecting to the Internet, refer to the table for
troubleshooting tips provided in this section.
If... See...
You cannot connect to the Internet Connecting to the Internet fails after instal-
lation, on page 201
You can connect to the Internet but are dis-
connected after a short time
Allowing ISP Heartbeat messages, on
page 201
Your computer is an Internet Connection
Sharing (ICS) client and you cant connect to
the Internet
Connecting through an ICS client, on
page 202
Your computer uses a proxy server to connect
to the Internet and you cant connect to the
Internet
Connecting through a proxy server, on
page 202
You see the message Could not contact
automatic program server in a program
alert.
Unable to connect to program advice
server, on page 202
Table 14-3: Troubleshooting Internet connection problems
Appendix 14: Troubleshooting Connecting to the Internet fails after installation
Connecting to the Internet fails after installation
If you are unable to connect to the Internet after installing ZoneAlarm security
software, the first troubleshooting step is to determine whether ZoneAlarm security
software is the cause. If you are unable to follow the steps below, for example, if you
can't clear the Load ZoneAlarm security software at startup check box, contact
ZoneAlarm technical support.
To determine if ZoneAlarm security software is the cause of connection problems:
2. In the General area, clear the check box Load ZoneAlarm security software at
startup.
A warning dialog labeled ZoneAlarm TrueVector Service opens.
3. Click Allow.
4. Restart your computer, then try to connect to the Internet.
Allowing ISP Heartbeat messages
Internet Service Providers (ISPs) periodically send heartbeat messages to their
connected dial-up customers to make sure they are still there. If the ISP cannot
determine that the customer is there, it might disconnect the customer so that the users
IP address can be given to someone else.
By default, ZoneAlarm security software blocks the protocols most commonly used for
these heartbeat messages, which may cause you to be disconnected from the Internet.
To prevent this from happening, you can identify the server sending the messages and
add it to your Trusted Zone or you can configure the Internet Zone to allow ping
messages.
Identifying the source of the heartbeat messages
This is the preferred solution because it will work whether your ISP uses NetBIOS or
ICMP (Internet Control Message Protocol) to check your connection, and it allows you to
maintain high security for the Internet Zone.
To identify the server your ISP uses to check your connection:
1. When your ISP disconnects you, click Alerts & Logs|Log Viewer.
2. In the alerts list, find the alert that occurred at the time you were disconnected.
If you can connect Your ZoneAlarm security software settings may be the
cause of your connection problems. Make sure that
your browser has access permission.
If you cannot connect Your ZoneAlarm security software settings are not the
cause of your connection problems.
Appendix 14: Troubleshooting Connecting through an ICS client
3. In the Entry Detail area, note the Source DNS detected.
If youre not able to identify the server this way, contact your ISP to determine which
servers need access permission.
4. After you have identified the server, add it to the Trusted Zone.
Configuring ZoneAlarm security software to allow ping messages
If your ISP uses ICMP echo (or ping) messages for connectivity checks, configure
ZoneAlarm security software to allow ping messages from the Internet Zone.
To configure ZoneAlarm security software to allow ping messages:
1. Select Firewall.
2. In the Internet Zone area, click Custom.
3. Select check box labeled Allow incoming ping (ICMP echo).
4. Click OK.
5. Set the security level for the Internet Zone to Medium.
See Choosing security levels, on page 34.
Connecting through an ICS client
If you are using Windows Internet Connection Sharing (ICS) option, or a third-party
connection sharing program, and you are unable to connect to the Internet, make sure
that ZoneAlarm security software is properly configured for the client and gateway
machines. See Enabling Internet Connection Sharing, on page 27.
Do not configure ZoneAlarm security software for Internet Connection Sharing if you
use hardware such as a server or router, rather than a host PC.
Connecting through a proxy server
If you connect to the Internet through a proxy server and you are unable to connect to
the Internet, make sure that the IP address of your proxy server is in your Trusted Zone.
Unable to connect to program advice server
If you receive a Program alert with the message Could not contact automatic program
server, in the SmartDefense Advisor area, make sure that your Internet Connection is
working properly.
Verify that your computer is connected to the network or modem properly.
If you are connected to the Internet via cable modem or DSL, you may have
encountered a temporary service interruption.
Appendix 14: Troubleshooting Anti-virus
Many times it is just a matter of trying again later if the user has a working
configuration.
Launch your browser. If you are unable to connect to any site on the Internet, you
may have ZoneAlarm security software configured to block Internet access.
Providing the correct permission to your browser may resolve the problem.
If none of these scenarios apply, its possible that the server is temporarily unavailable.
Anti-virus
If you are having difficulty connecting using anti-virus software refer to the table for
troubleshooting tips provided in this section.
If a safe application has been quarantined
On rare occasions, its possible that an application you trust is quarantined because it is a
spoof of the real application and therefore was detected as a virus. But, if an application
that you know to be safe is quarantined, it may be a false positive virus detection. False
positives occur when a pattern of code in the file matches the same pattern contained in
a virus signature. This can occur due to a faulty signature or it can occur after
incomplete treatment by another anti-virus scanner. False positives are most likely to
occur in applications that are not widely used.
If you believe your application has been improperly quarantined, heres how to restore it
and stop putting it in quarantine:
1. Select Anti-virus | Quarantine.
2. Select your item under Quarantine and click the Restore button.
4. Under Virus Management, click Exceptions.
If... See...
An application you trust has been quaran-
tined.
If a safe application has been quaran-
tined, on page 203
Anti-virus Monitoring feature is unavailable Anti-virus Monitoring alert, on page 204
You receive an alert about conflicting prod-
ucts
Resolving conflicts with anti-virus prod-
ucts, on page 204
You are unable to turn on the Anti-virus fea-
ture
E-mail scanning is unavailable, on
page 204
Table 14-4: Troubleshooting ZoneAlarm Anti-virus problems
Appendix 14: Troubleshooting Anti-virus Monitoring alert
5. Click Add file... and browse to select the trusted program that you do not want
quarantined in a virus scan.
6. Click OK to close Add File and then to close Advanced Options.
If the above technique does not work for your program:
Select Anti-virus/spyware, then click Advanced Options. Under Virus Management,
select Automatic Treatment, and select Alert me - do not treat automatically. Then
try the steps above again. Be sure to go back and restore the Automatic Treatment
setting afterward.
You can send names of suspected false positive detections to
[email protected].
Anti-virus Monitoring alert
The Anti-virus Monitoring alert lets you know when the anti-virus protection on your
computer is not fully protecting you from viruses. You may receive this alert when your
anti-virus is turned off, when your anti-virus signatures are not up-to-date, or when you
are not running any anti-virus software at all.
Note that not all anti-virus products are monitored, so the absence of an alert does not
necessarily mean you are protected. To ensure your protection, open your anti-virus
software (if it is installed) and perform an update or renew your subscription, if it has
expired.
Resolving conflicts with anti-virus products
If you also have another anti-virus product installed, you may receive a conflict alert that
states you must uninstall that product before using ZoneAlarm anti-virus. The alert will
list the anti-virus software products that were detected and specify whether ZoneAlarm
is able to uninstall them automatically, or if they must be uninstalled manually. If the
products listed cannot be uninstalled automatically, refer to the individual vendors
documentation for instructions for uninstalling the products.
E-mail scanning is unavailable
If you are attempting to enable the e-mail scanning option of ZoneAlarm anti-virus
software and are unable to do so, you may have a product installed that uses Layered
Service Provider (LSP) technology that is incompatible with ZoneAlarm. To remedy
this situation, you will need to uninstall the conflicting product(s).
When a conflict occurs, a file called lspconflict.txt is created and placed in the C:/
Windows/Internet Logs directory. This file contains the name of the product(s) that
caused the conflict. You can remove the product(s) manually or send e-mail to
[email protected] and attach the file. Refer to the individual vendors
documentation for instructions for uninstalling the product(s).
Appendix 14: Troubleshooting Hard Drive Encryption
Hard Drive Encryption
For troubleshooting the Hard Drive Encryption feature, refer to the table below.
Third-party software
Many of your most commonly used programs can be configured automatically for
Internet access. Although, in some cases, Internet access can be configured
automatically, many programs also require server access rights.
If you are using programs that ZoneAlarm security software is unable to recognize and
configure automatically, you may need to configure permissions manually. Refer to the
sections that follow to learn how to configure your programs for use with ZoneAlarm
security software.
Anti-virus
Browsers
Chat and instant messaging programs
E-mail programs
Internet answering machine programs
File sharing programs
FTP programs
Games
Remote control programs
VNC programs
Streaming media programs
Voice over IP programs
Web conferencing programs
If... See...
You forgot your password or username What to do if you forget your password or
username:, on page 178
Your system crashes and you need to recover
the disk but it is encrypted
How to decrypt in case of system failure,
on page 178
Table 14-5: Troubleshooting Hard Drive Encryption problems
Appendix 14: Troubleshooting Anti-virus
Anti-virus
In order for your anti-virus software to receive updates it must have access permission
for the Trusted Zone.
Automatic updates
In order to receive automatic updates from your anti-virus software vendor, add the
domain that contains the updates (e.g., update.avsupdate.com) to your Trusted Zone.
Browsers
In order for your browser to work properly, it must have access permission for the
Internet Zone and Trusted Zone. Before granting permission, make sure that you
understand how to configure your browsers security for optimal protection and have
the latest service packs installed for the browser you are using.
To grant your browser access permission, do any of the following:
Grant access to the program directly. See Granting a program permission to access
the Internet, on page 106.
Select Allow when a Program alert for the browser appears.
Internet Explorer
You may need to allow Internet access rights to the Services and Controller App (the
file name is typically services.exe).
To grant Internet access permission to the Services and Controller App:
2. In the Programs column, locate Services and Controller App.
3. In the Access column, select Allow from the shortcut menu.
Chat and instant messaging programs
Chat and instant messaging programs (for example, AOL Instant Messenger) may
require server permission in order to operate properly.
To grant server permission to your chat program:
Answer Allow to the Server Program alert caused by the program.
Grant server permission to the program.
Appendix 14: Troubleshooting E-mail programs
See Granting a program permission to act as a server, on page 106.
E-mail programs
In order for your e-mail program (for example, Microsoft Outlook) to send and receive
mail, it must have access permission for the Zone the mail server is in. In addition, some
e-mail client software may have more than one component requiring server permission.
For example, Microsoft Outlook requires that both the base application
(OUTLOOK.EXE) and the Messaging Subsystem Spooler (MAPISP32.exe) to have
server permission.
While you can give your e-mail program access to the Internet Zone, and leave the mail
server there, its safer to place the mail server in the Trusted Zone, and limit the
program's access to that Zone only. Once your e-mail client has access to the Trusted
Zone, add the remote mail server (host) to the Trusted Zone.
To learn how to give a program permission to access or act as a server to the Trusted
Zone, see Setting program permissions manually, on page 91.
To learn how to add a host to the Trusted Zone, see Managing traffic sources, on
page 39.
Internet answering machine programs
To use Internet answering machine programs (such as CallWave) with ZoneAlarm
security software, do the following:
Give the program server permission and access permission for the Internet Zone.
Add the IP address of the vendor's servers to the Trusted Zone.
Set the security level for the Internet Zone to Med.
File sharing programs
File sharing programs, such as Napster, Limewire, AudioGalaxy, or any Gnutella client
software, must have server permission for the Internet Zone in order to work with
ZoneAlarm security software.
We strongly recommend that you set your chat software to refuse file transfers
without prompting first. File transfer within chat programs is a means to
distribute malware such as worms, viruses, and Trojan horses. Refer to your chat
software vendor's help files to learn how to configure your program for maximum
security.
To find the server IP address, contact the vendor's technical support.
Appendix 14: Troubleshooting FTP programs
FTP programs
To use FTP (File Transfer Protocol) programs, you may need to make the following
settings adjustments in your FTP client program and in ZoneAlarm security software:
Enable passive or PASV mode in your FTP client
This tells the client to use the same port for communication in both directions. If
PASV is not enabled, ZoneAlarm security software may block the FTP server's
attempt to contact a new port for data transfer.
Add the FTP sites you use to the Trusted Zone
Give Trusted Zone access permission to your FTP client program.
To learn how to add to the Trusted Zone and give access permission to a program, see
Setting advanced security options, on page 35.
Games
In order to play games over the Internet while using ZoneAlarm security software, you
may have to adjust the settings listed below.
Program permission
In order to function, many Internet games require access permission and/or server
permission for the Internet Zone.
The easiest way to grant access is to answer Allow to the program alert caused by the
game program. However, many games run in exclusive full screen mode, which will
prevent you from seeing the alert. Use any of the methods below to solve this problem.
Set the game to run in a window
This will allow you to see the alert, if the game is running at a resolution lower than
that of your desktop. If the alert appears but you cannot respond to it because your
mouse is locked to the game, press the Windows logo key on your keyboard.
After granting the game program Internet access, reset the game to run full-screen.
Use software rendering mode
By changing your rendering mode to Software Rendering, you can allow Windows
to display the alert on top of your game screen. After allowing the game Internet
access, you can change back to your preferred rendering device.
Use Alt+Tab
Note that you can configure ZoneAlarm security software to suppress most alerts
while you are playing a game. For details, see Game Mode, on page 193.
Appendix 14: Troubleshooting Remote control programs
Press Alt+Tab to toggle back into Windows. This leaves the game running, but
allows you to respond to the alert. Once you have allowed Internet access, press
Alt+Tab again to restore your game.
Security level/Zone
Some Internet games, particularly those that use Java, applets, or other Web-based
portal functionality, may not work properly when your Internet Zone security level is set
to High. High security will also prevent remote game servers from seeing your
computer. To solve these problems, you can:
Change your Internet Zone security level to Medium, or
Add the IP address of the game server youre connecting to the Trusted Zone. The
game manufacturers documentation should indicate the IP address or host name of
the server.
To learn how to add a host or IP address to the Trusted Zone, see Adding to the
Trusted Zone, on page 40.
Remote control programs
If your computer is either the host or the client of a remote access system such as
PCAnywhere or Timbuktu:
Add the IP address(es) of the hosts or clients to which you connect to your Trusted
Zone. See Adding to the Trusted Zone, on page 40.
Add the subnet of the network you are accessing remotely to your Trusted Zone. See
Adding to the Trusted Zone, on page 40.
The last method may cause some applications to crash, especially if you are
using Glide or OpenGL; however, the problem should be corrected the next time
you run the game. Sometimes you can use Alt-Enter in the place of Alt-Tab.
Trusting game servers means trusting the other players in the game. ZoneAlarm
security software does not protect you from attacks instigated by fellow gamers
in a trusted environment. Make sure that you understand how to configure your
browser's security for optimal protection and have the latest service packs
installed for the browser you are using.
Appendix 14: Troubleshooting VNC programs
If a dynamic IP address is assigned to the remote machine, add the DHCP server
address or range of addresses to the Trusted Zone.
VNC programs
In order for VNC and ZoneAlarm security software to work together, follow the steps
below.
1. On both the server and viewer (client) machine, do one of the following:
If you know the IP address or subnet of the viewer (client) you will be using for
remote access, and it will always be the same, add that IP or subnet to the Trusted
Zone. See Adding to the Trusted Zone, on page 40.
If you do not know the IP address of the viewer, or if it will change, then
give the program access permission and server permission for the
Trusted and Internet Zones. See Setting permissions for specific
When prompted by VNC Viewer on the viewer machine, enter the name
or IP address of the server machine, followed by the password when
prompted. You should be able to connect.
2. On the viewer (client) machine, run VNC Viewer to connect to the server machine.
Do not run in listen mode.
Telnet
To access a remote server via Telnet, add the IP address of that server to your Trusted Zone.
Streaming media programs
Applications that stream audio and video, such as RealPlayer, Windows Media Player,
QuickTime, etc., must have server permission for the Internet Zone in order to work
with ZoneAlarm security software.
To learn how to give server permission to a program, see Granting a program
permission to act as a server, on page 106.
If your remote control client or host is on a network not under your control (for
example on a business or university LAN), perimeter firewalls or other features of
the network may prevent you from connecting. If you still have problems
connecting after following the instructions above, contact your network
administrator for assistance.
If you enable VNC access by giving it server permission and access permission,
be sure to set and use your VNC password in order to maintain security. We
recommend adding the server and viewer IP addresses to the Trusted Zone,
rather than giving the application Internet Zone permission, if possible.
Appendix 14: Troubleshooting Voice over IP programs
Voice over IP programs
To use Voice over IP (VoIP) programs with ZoneAlarm security software, you must do
one or both of the following, depending on the program:
1. Give the VoIP application server permission and access permission.
2. Add the VoIP providers servers to the Trusted Zone. To learn the IP addresses of
these servers, contact your VoIP provider's customer support.
Web conferencing programs
If you experience problems using a Web conferencing program such as Microsoft
NetMeeting, try the following:
1. Add the domain or IP address that you connect to in order to hold the conference to
the Trusted Zone. See Adding to the Trusted Zone, on page 40.
2. Disable the conferencing programs Remote Desktop Sharing option.
Appendix 14: Troubleshooting Web conferencing programs
Appendix
A
215
Keyboard shortcuts
Many features of ZoneAlarm security software are accessi-
ble using keyboard shortcuts.
Navigation shortcuts, on page 215
Global function shortcuts, on page 216
Dialog box commands, on page 217
Button shortcuts, on page 218
Navigation shortcuts
Use these keystrokes to navigate through panels, settings, and dialog boxes. Use UP,
DOWN, LEFT, and RIGHT arrows to reach the selection you want within that group.
Keystroke Function
F1 Opens online help for the
current panel.
UP and DOWN arrows Navigates through individ-
ual controls within a group
of controls.
LEFT and RIGHT arrows Also navigate through indi-
vidual controls within a
group of controls. In list
views, controls horizontal
scrolling.
Table A-1: Navigation shortcuts
Appendix A: Keyboard shortcuts Global function shortcuts
Global function shortcuts
Use the following keystrokes to activate functions from multiple locations in the
interface. Note that some keystrokes may have other functions in specific panels. Those
cases are listed under Button Shortcuts, below.
ALT+SPACEBAR Opens the Windows control
menu (maximize, mini-
mize, close).
Keystroke Function
Table A-1: Navigation shortcuts
Keystroke Function
ALT+C Opens a Custom dialog box,
where one is available.
ALT+U Opens a second Custom
dialog box, where two Cus-
tom buttons are available
(for example, in the main
panel of the Program Con-
trol panel).
ALT+A Opens an advanced dialog
box, where one is available.
ALT+DOWN ARROW Opens the active drop-down
list box. In list views, opens
the left-click shortcut menu
if one is available.
SHIFT+F10 In list views, opens the
right-click shortcut menu if
one is available.
ESC Equivalent to clicking a
Cancel button.
ENTER Equivalent to clicking the
active button.
ALT+P Equivalent to clicking an
Apply button.
Delete Removes a selected item
from a list view.
Table A-2: Global shortcuts
Appendix A: Keyboard shortcuts Dialog box commands
Dialog box commands
Use the keystrokes below when a dialog box is open.
ALT+F4 Shuts down ZoneAlarm
security software.
Keystroke Function
Table A-2: Global shortcuts
Appendix A: Keyboard shortcuts Button shortcuts
Button shortcuts
Use the keystrokes below to click available buttons in an active window.
Keystroke Function
Tab Activates the next control in the dialog box.
SHIFT+TAB Activates the previous control in the dialog
box.
CTRL+TAB Opens the next TAB in a multiple-TAB dialog
box.
CTRL+SHIFT+TAB Opens the previous TAB in a multiple-TAB
dialog box.
ALT+DOWN ARROW Opens the active drop-down list box.
SPACEBAR Clicks an active button. Selects/clears an
active check box.
ENTER Same as clicking the active button
ESC Same as clicking the Cancel button.
Table A-3: Dialog box shortcuts
Panel Pane Keystroke Equivalent to clicking
Overview Product Info Alt + I Change License
Overview Product Info Alt + B Buy Now
Overview Product Info Alt + N Renew
Overview Product Info Alt + R Change Reg.
Overview Preferences Alt + P Set Password
Overview Preferences Alt + B Backup
Overview Preferences Alt + R Restore
Overview Preferences Alt + O Log In/Log Out
Overview Preferences Alt + U Check for Update
Firewall Main Alt + C Internet Zone Custom
Firewall Main Alt + U Trusted Zone Custom
Table A-4: Keystrokes for activating buttons
Firewall Main Alt + A Advanced
Firewall Zones Alt +A Add
Firewall Zones Alt + R Remove
Firewall Zones Alt + E Edit
Firewall Zones Alt + P Apply
Firewall Expert Alt + A Add
Firewall Expert Alt + R Remove
Firewall Expert Alt + E Edit
Firewall Expert Alt + P Apply
Firewall Expert Alt + G Groups
Program Control Main Alt + C Program Control Custom
Program Control Main Alt + U Automatic Lock Custom
Program Control Main Alt + A Advanced
Program Control Programs Alt + A Add
Program Control Programs Alt + O Options
Program Control Components Alt + M More info
Anti-virus / Anti-spyware Main ALT + S Scan for Viruses/Spyware
Anti-virus / Anti-spyware Main ALT + U Update Now
Anti-virus / Anti-spyware Main ALT + A Advanced Options
Anti-virus / Anti-spyware Main ALT + V Scan for Viruses
Anti-virus / Anti-spyware Quarantine ALT + D Delete
Anti-virus / Anti-spyware Quarantine ALT + E Restore
Anti-virus / Anti-spyware Quarantine ALT + M More Info
E-mail Protection Main ALT + A Advanced
E-mail Protection Attachments ALT + C Check All
E-mail Protection Attachments ALT + R Clear All
E-mail Protection Attachments ALT + A Add
E-mail Protection Attachments ALT + P Apply
ID Lock myVAULT Alt + A Add
ID Lock myVAULT Alt + O Options
ID Lock myVAULT Alt + N Encrypt
ID Lock myVAULT Alt + E Edit
ID Lock myVAULT Alt + R Remove
ID Lock Trusted Sites Alt + A Add
ID Lock Trusted Sites Alt + R Remove
Parental Control Main Alt + A Advanced
Parental Control Categories Alt + C Check All
Parental Control Categories Alt + R Clear All
Alerts & Logs Main Alt + D Reset to Default
Alerts & Logs Main Alt + C Custom
Alerts & Logs Main Alt + A Advanced
Alerts & Logs Log Viewer Alt + M More Info
Alerts & Logs Log Viewer Alt + D Clear List
Alerts & Logs Log Viewer Alt + A Add to Zone
Alerts & Logs Log Control Alt + B Browse
Alerts & Logs Log Control Alt + E Delete Log
Glossary
1394
A very fast external bus standard that supports data transfer rates of up to
400Mbps (in 1394a) and 800Mbps (in 1394b). Products supporting the 1394
standard go under different names, depending on the company. Apple, which
originally developed the technology, uses the trademarked name FireWire.
3DES
Short for Triple Data Encryption Standard, a standards-based symmetric-key
encryption method using a 168-bit key. 3DES is a more robust variation of the
older 56-bit DES encryption standard.
ACCESS PERMISSION
Access permission allows a program on your computer to initiate
communications with another computer. This is distinct from server
permission, which allows a program to listen for connection requests from
other computers. You can give a program access permission for the Trusted
Zone, the Internet Zone, or both.
ACT AS A SERVER
A program acts as a server when it listens for connection requests from other
computers. Several common types of applications, such as chat programs, e-
mail clients, and Internet Call Waiting programs, may need to act as servers to
operate properly. However, some hacker programs act as servers to listen for
instructions from their creators. ZoneAlarm security software prevents
programs on your computer from acting as servers unless you grant server
permission.
ACTIVEX CONTROLS
A set of technologies developed by Microsoft that can be automatically
downloaded and executed by a Web browser. Because ActiveX controls have
full access to the Windows operating system, they have the potential to damage
software or data on a users machine.
AD BLOCKING
A ZoneAlarm security software feature that enables you to block banner, pop-
up and other types of advertisements.
ADVANCED PROGRAM CONTROL
Advanced Program Control is an advanced security feature that tightens your
security by preventing unknown programs from using trusted programs to
Glossary
access the Internet.
ANIMATED AD
An advertisement that incorporates moving images.
BANNER AD
An ad that appears in a horizontal banner across a Web page.
BLOCKED ZONE
The Blocked Zone contains computers you want no contact with. ZoneAlarm
security software prevents any communication between your computer and the
machines in this Zone.
BLUE COAT
Blue Coat is a software development and application services company that
filters, monitors and reports on Internet use and activity. The Parental Control
feature uses Blue Coat content categories to determine whether access to Web
sites you visit will be allowed or blocked.
BOOT SECTOR VIRUS
Type of computer virus that infects the first or first few sectors of a computer
hard drive or diskette drive allowing the virus to activate as the drive or diskette
boots.
CACHE CLEANER
Privacy feature that enables you to remove unwanted files and cookies from
your computer on demand, or on a scheduled basis.
CLEAR TEXT
Clear text, also referred to as plain text, is data that is being transmitted in
textual form and is not encrypted. Because the data is not encrypted, it could
be intercepted and read by others during transmission.
COLLABORATIVE FILTER
A feature of Zone Labs security softwares junk e-mail filter. Collaborative
filtering uses information extracted from junk e-mail reported by you and other
ZoneAlarm security software users to determine the probability that new
messages from unknown senders are spam.
COMPONENT
A small program or set of functions that larger programs call on to perform
specific tasks. Some components may be used by several different programs
simultaneously. Windows operating systems provide many component DLLs
(Dynamic Link Libraries) for use by a variety of Windows applications.
COMPONENT LEARNING MODE
The period after installation when program control is set to Medium. When in
component learning mode, ZoneAlarm security software can quickly learn the
MD5 signatures of many frequently used components without interrupting
Glossary
your work with multiple alerts.
COOKIE
A small data file used by a Web site to customize content, remember you from
one visit to the next, and/or track your Internet activity. While there are many
benign uses of cookies, some cookies can be used to divulge information about
you without your consent.
DES
Short for Data Encryption Standard, a popular symmetric-key encryption
method using a 56-bit key. DES has been supplanted by 3DES, a more robust
variation of DES.
DESTRUCTIVENESS
Refers to the extent of the damage caused by a virus. The Destructiveness
rating refers to the degree to which the damage can be reversed. A low
Destructiveness rating would indicate that the scale of the interruption was
small, and that any damage done could be reversed. A Medium or High
Destructiveness rating would indicate that the damage caused may be
irreversible, or that it caused a widespread interruption.
DHCP (DYNAMIC HOST CONFIGURATION PROTOCOL)
A protocol used to support dynamic IP addressing. Rather than giving you a
static IP address, your ISP may assign a different IP address to you each time
you log on. This allows the provider to serve a large number of customers with
a relatively small number of IP addresses.
DHCP (DYNAMIC HOST CONFIGURATION PROTOCOL) BROADCAST/MULTICAST
A type of message used by a client computer on a network that uses dynamic
IP addressing. When the computer comes online, if it needs an IP address, it
issues a broadcast message to any DHCP servers which are on the network.
When a DHCP server receives the broadcast, it assigns an IP address to the
computer.
DIAL-UP CONNECTION
Connection to the Internet using a modem and an analog telephone line. The
modem connects to the Internet by dialing a telephone number at the Internet
Service Providers site. This is in distinction to other connection methods, such
as Digital Subscriber Lines, that do not use analog modems and do not dial
telephone numbers.
HARD DRIVE ENCRYPTION
Hard Drive Encryption makes everything on your computer unreadable to
unauthorized users, and an encryption username and password are required
before your computer fully boots up. This prevents hackers from breaking into
your operating system by removing your disk and using bypass tools or
alternative boot media. Your full hard disk is encrypted, including deleted and
Glossary
temporary files, which protects your sensitive data if your disk is stolen or lost.
DLL (DYNAMIC LINK LIBRARY)
A library of functions that can be accessed dynamically (that is, as needed) by
a Windows application.
DNS (DOMAIN NAME SERVER)
A data query service generally used on the Internet for translating host names
or domain names (like www.yoursite.com) into Internet addresses (like
123.456.789.0).
DRIVER
A program that controls a device. In Windows environments, drivers often
have a.DRV extension. A driver acts like a translator between the device and
programs that use the device. Each device has its own set of specialized
commands that only its driver knows. In contrast, most programs access
devices by using generic commands. The driver accepts generic commands
from a program and then translates them into specialized commands for the
device.
EMBEDDED OBJECT
An object such as a sound file or an image file that is embedded in a Web page.
ENCRYPTION
The process of transmitting scrambled data so that only authorized recipients
can unscramble it. For instance, encryption is used to scramble credit card
information when purchases are made over the Internet.
FOREIGN LANGUAGE FILTERS
A feature of ZoneAlarm security softwares junk e-mail filter. Foreign language
filters block e-mail containing non-European languages.
GAME MODE
Game Mode temporarily suppresses most ZoneAlarm security software scans,
product updates, and alerts, so that you can play games on your computer with
fewer interruptions. Game Mode lets you temporarily allow or deny all
program permission requests, so that ZoneAlarm security software can answer
such requests automatically without displaying alerts.
GATEWAY
In networking, a combination of hardware and software that links two
different types of networks. For example, if you are on a home or business
Local Area Network (LAN), a gateway enables the computers on your network
to communicate with the Internet.
HASH
A hash is a number generated by a formula from a string of text in such a way
that it is unlikely that some other text would produce the same value. Hashes
Glossary
are used to ensure that transmitted messages have not been tampered with.
HEARTBEAT MESSAGES
Messages sent by an Internet Service Provider (ISP) to make sure that a dial-up
connection is still in use. If it appears a customer is not there, the ISP might
disconnect her so that her IP address can be given to someone else.
HIGH-RATED ALERTS
An alert that is likely to have been caused by hacker activity. High-rated
Firewall alerts display a red band at the top of the alert pop-up. In the Log
Viewer, you can see if an alert was high-rated by looking in the Rating column.
HTTP REFERRER HEADER FIELD
An optional field in the message that opens a Web page, containing
information about the referring document. Properly used, this field helps
Web masters administer their sites. Improperly used, it can divulge your IP
address, your workstation name, login name, or even (in a poorly-implemented
e-commerce site) your credit card number. By selecting Remove Private
Header information in the Cookies panel, you prevent this header field from
transferring any information about you.
ICMP (INTERNET CONTROL MESSAGE PROTOCOL)
An extension of the Internet Protocol that supports error control and
informational messages. The ping message is a common ICMP message used
to test an Internet connection.
ICS (INTERNET CONNECTION SHARING)
ICS is a service provided by the Windows operating system that enables
networked computers to share a single connection to the Internet.
INDEX.DAT
Index.dat files keep copies of everything that was in your Temporary Internet,
Cookies, and History folders even AFTER these files have been deleted.
INFORMATIONAL ALERTS
The type of alerts that appear when ZoneAlarm security software blocks a
communication that did not match your security settings. Informational alerts
do not require a response from you.
INTERNET ZONE
The Internet Zone contains all the computers in the worldexcept those you
have added to the Trusted Zone or Blocked Zone.
ZoneAlarm security software applies the strictest security to the Internet Zone,
keeping you safe from hackers. Meanwhile, the medium security settings of the
Trusted Zone enable you to communicate easily with the computers or
networks you know and trustfor example, your home network PCs, or your
Glossary
business network.
IP ADDRESS
The number that identifies your computer on the Internet, as a telephone
number identifies your phone on a telephone network. It is a numeric address,
usually displayed as four numbers between 0 and 255, separated by periods.
For example, 172.16.100.100 could be an IP address.
Your IP address may always be the same. However, your Internet Service
Provider (ISPs) may use Dynamic Host Configuration Protocol (DHCP) to
assign your computer a different IP address each time you connect to the
Internet.
ISP (INTERNET SERVICE PROVIDER)
A company that provides access to the Internet. ISPs provide many kinds of
Internet connections to consumers and business, including dial-up (connection
over a regular telephone line with a modem), high-speed Digital Subscriber
Lines (DSL), and cable modem.
JAVA APPLET
A small Internet-based program written in Java that is usually embedded in an
HTML page on a Web site and can be executed from within a browser.
JAVASCRIPT
A popular scripting language that enables some of the most common
interactive content on Web sites. Some of the most frequently used JavaScript
functions include Back and History links, changing images on mouse-over, and
opening and closing browser windows. ZoneAlarm security software default
settings allow JavaScript because it is so common and because most of its uses
are harmless.
KEYLOGGER
A form of spyware that records keystrokes on your computer, often sending
the data to a remote server. Any text input using the keyboard, including credit
card numbers or other sensitive personal information could be gathered by a
keylogging program and used to commit identity theft.
MAIL SERVER
The remote computer from which the e-mail program on your computer
retrieves e-mail messages sent to you.
MD5 SIGNATURE
A digital fingerprint used to verify the integrity of a file. If a file has been
changed in any way (for example, if a program has been compromised by a
hacker), its MD5 signature will change as well.
MEDIUM-RATED ALERT
An alert that was probably caused by harmless network activity, rather than by
Glossary
a hacker attack.
MESSAGE FILTERS
A feature of ZoneAlarm security softwares junk e-mail filter. Message Filters
use heuristic rules to analyze e-mail for characteristics common to various
types of junk e-mail.
MIME-TYPE INTEGRATED OBJECT
An object such as an image, sound file, or video file that is integrated into an
e-mail message. MIME stands for Multipurpose Internet Mail Extensions.
MOBILE CODE
Executable content that can be embedded in Web pages or HTML e-mail.
Mobile code helps make Web sites interactive, but malicious mobile code can
be used to modify or steal data, and for other malevolent purposes.
MOBILE CODE CONTROL
A ZoneAlarm security software feature that enables you to block active
controls and scripts on the Web sites you visit. While mobile code is common
on the Internet and has many benign uses, hackers can sometimes use it for
malevolent purposes.
NETBIOS (NETWORK BASIC INPUT/OUTPUT SYSTEM)
A program that allows applications on different computers to communicate
within a local network. By default, ZoneAlarm security software allows
NetBIOS traffic in the Trusted Zone, but blocks it in the Internet Zone. This
enables file sharing on local networks, while protecting you from NetBIOS
vulnerabilities on the Internet.
OPENSSL
OpenSSL is an open source security protocol based on the SSL library
developed by Eric A. Young and Tim J. Hudson.
PACKET
A single unit of network traffic. On packet-switched networks like the
Internet, outgoing messages are divided into small units, sent and routed to
their destinations, then reassembled on the other end. Each packet includes the
IP address of the sender, and the destination IP address and port number.
PASS-LOCK
When the Internet Lock is engaged, programs given pass-lock permission can
continue accessing the Internet. Access permission and server permission for
all other programs is revoked until the lock is opened.
PERSISTENT COOKIE
A cookie put on your hard drive by a Web site you visit. These cookies can be
retrieved by the Web site the next time you visit. While useful, they create a
vulnerability by storing information about you, your computer, or your
Glossary
Internet use in a text file.
PERVASIVENESS
Pervasiveness refers to a virus potential to spread. A boot sector virus that
spreads through the manual sharing of floppy disks is given a low
Pervasiveness rating, while a worm that has the ability to send itself out to a
large number of victims is given a high pervasiveness rating.
PHISHING
The act of sending a deceptive e-mail that falsely claims to be from a legitimate
business or agency. A phishing e-mail attempts to deceive recipients into
providing personal information that can then be used for fraudulent purposes.
PHYSICAL MEMORY
The memory hardware (normally RAM) installed in a computer.
PING
A type of ICMP message (formally ICMP echo) used to determine whether
a specific computer is connected to the Internet. A small utility program sends
a simple echo request message to the destination IP address, and then waits
for a response. If a computer at that address receives the message, it sends an
echo back. Some Internet providers regularly ping their customers to see
if they are still connected.
POP-UNDER AD
An ad that appears in a new browser window that opens under the window
you're looking at, so you don't see the ad until you close the original browser
window.
POP-UP AD
An ad that appears in a new browser window that 'pops up' in front of the
window you're looking at.
PORT
A channel associated with the use of TCP or UDP. Some ports are associated
with standard network protocols; for example, HTTP (Hypertext Transfer
Protocol) is traditionally addressed to port 80. Port numbers range from 0 to
65535.
PORT SCAN
A technique hackers use to find unprotected computers on the Internet. Using
automated tools, the hacker systematically scans the ports on all the computers
in a range of IP addresses, looking for unprotected or open ports. Once an
open port is located, the hacker can use it as an access point to break in to the
unprotected computer.
PRIVATE NETWORK
A home or business Local Area Network (LAN). Private networks are placed
Glossary
in the Trusted Zone by default.
PRODUCT UPDATE SERVICE
ZoneAlarm subscription service that provides free product and virus signature
updates to ZoneAlarm security software. When you purchase ZoneAlarm
security software, you automatically receive a year's subscription to product
update service. This way you always have the latest version of the product and
can detect newly created viruses as well.
PROGRAMS LIST
The list of programs to which you can assign Internet access and server
permissions. The list is shown in the Programs panel of the Program Control
panel. You can add programs to the list, or remove programs from it.
PROTOCOL
A standardized format for sending and receiving data. Different protocols
serve different purposes; for example SMTP (Simple Mail Transfer Protocol)
is used for sending e-mail messages; while FTP (File Transfer Protocol) is used
to send large files of different types. Each protocol is associated with a specific
port, for example, FTP messages are addressed to port 21.
PUBLIC NETWORK
A large network, such as that associated with an ISP. Public networks are
placed in the Internet Zone by default.
QUARANTINE
A method used to render harmless suspicious attachments, viruses, or spyware.
SCRIPT
A series of commands that execute automatically, without the user intervening.
These usually take the form of banners, menus that change when you move
your mouse over them, and pop-up ads.
SECURITY LEVELS
The High, Med., and Off settings that dictate the type of traffic allowed into or
out of your computer.
SELF-SIGNED CERTIFICATE
A public-key certificate for which the public key bound by the certificate and
the private key used to sign the certificate are components of the same key pair,
which belongs to the signer.
SERVER PERMISSION
Server permission allows a program on your computer to listen for
connection requests from other computers, in effect giving those computers
the power to initiate communications with yours. This is distinct from access
permission, which allows a program to initiate a communications session with
Glossary
another computer.
SESSION COOKIE
A cookie stored in your browsers memory cache that disappears as soon as
you close your browser window. These are the safest cookies because of their
short life-span.
SHA1
An algorithm used for creating a hash of data.
SKYSCRAPER AD
An ad that appears in a vertical column along the side of a Web page.
SMARTDEFENSE ADVISOR
ZoneAlarm SmartDefense Advisor is an online utility that enables you to
instantly analyze the possible causes of an alert, and helps you decide whether
to respond Allow or Deny to a Program alert. To use SmartDefense Advisor,
click the More Info button in an alert pop-up. ZoneAlarm security software
sends information about your alert to SmartDefense Advisor. SmartDefense
Advisor returns an article that explains the alert and gives you advice on what,
if anything, you need to do to ensure your security.
SPAM
An inappropriate attempt to use a mailing list or USENET or other networked
communications facility as if it were are broadcast medium by sending
unsolicited messages to a large number of people.
STEALTH MODE
When ZoneAlarm security software puts your computer in stealth mode, any
uninvited traffic receives no response--not even an acknowledgement that your
computer exists. This renders your computer invisible to other computers on
the Internet, until permitted program on your computer initiates contact.
TCP (TRANSMISSION CONTROL PROTOCOL)
One of the main protocols in TCP/IP networks, which guarantees delivery of
data, and that packets are delivered in the same order in which they were sent.
THIRD PARTY COOKIE
A persistent cookie that is placed on your computer, not by the Web site you
are visiting, but by an advertiser or other third party. These cookies are
commonly used to deliver information about your Internet activity to that third
party. Also known as tracking cookies.
TROJAN HORSE
A malicious program that masquerades as something useful or harmless, such
as a screen saver. Some Trojan horses operate by setting themselves up as
servers on your computer, listening for connections from the outside. If a
hacker succeeds in contacting the program, he can effectively take control of
your computer. This is why it's important to only give server permission to
programs you know and trust. Other Trojan horses attempt to contact a
Glossary
remote address automatically.
TRUEVECTOR SECURITY ENGINE
The primary component of ZoneAlarm security software security. It is the
TrueVector engine that examines Internet traffic and enforces security rules.
TRUSTED ZONE
The Trusted Zone contains computers you trust and want to share resources
with.
For example, if you have three home PCs that are linked together in an
Ethernet network, you can put each individual computer or the entire network
adapter subnet in the ZoneAlarm security software Trusted Zone. The Trusted
Zone's default medium security settings enable you to safely share files,
printers, and other resources over the home network. Hackers are confined to
the Internet Zone, where high security settings keep you safe.
UDP (USER DATAGRAM PROTOCOL)
A connection-less protocol that runs on top of IP networks and is used
primarily for broadcasting messages over a network.
WEB BUG
An image file, often 1x1 pixel, designed to monitor visits to the page (or HTML
e-mail) containing it. Web bugs are used to find out what advertisements and
Web pages you have viewed.
WILD
Refers to a virus that is spreading as a result of normal day-to-day operations
on and between the computers of unsuspecting users. The Wild rating refers
to the number of customer reports about this virus. A low Wild rating will
reflect a low number of customer reports, whereas a Medium or High Wild
rating will reflect a more substantial number of customer reports.
Index
A
access permission
and anti-virus software 206
browser software and 206
configuring for programs 12
e-mail programs and 207
for Trusted Zone 11
FTP programs and 208
games and 208
granting to programs 31, 92
setting for ports 44
act as server 11
defined 222
Action
in expert rule 48, 55
in Log Viewer 42, 187
activist sites, blocking 144
adding
custom ports 44
expert rules to programs 111
networks to the Trusted Zone 38
programs to the programs list 105
to the Blocked Zone 42
to the Trusted Zone 40
wireless networks to the Internet Zone 39
Additional Services 5
Address 53
Address Mask Reply and Request 53
Address Resolution Protocol, enabling 37
adult content, blocking 142
Advanced Program alert 73
Advanced Program Control 95
alerts
high-rated 61
ID Lock 82
Informational 60
Internet Lock 64
logging of 182
medium-rated 61
New Network 83, 85
OSFirewall 75
Program
Advanced Program alert 73
Automatic VPN Configuration alert 28, 74
Blocked Program 63
Changed Program alert 69
Manual Action Required alert 74
New Program 68, 75, 81
Repeat Program alert 185
Server Program alert 64, 92, 185, 206
reference ??85
responding to 8, 28
stopping them while gaming 195
Alt 52
Amazon protection profile, creating 17
answering machine programs 207
antivirus protection
status, viewing 135
antivirus protection feature 120??
AOL
in expert rules 52
Instant Messager, using 206
Application Interaction 108
Application Interaction Control 95
archive files
viruses and 132
asterisks, use of 165
Authenticating Header (AH) Protocol 28
Auto control setting 95
Auto-Learn 94
Auto-learn 95
Auto-learn security setting
program control and 94
automatic lock
enabling 98
setting options for 99
Automatic VPN Configuration alert 74
B
backing up and restoring security settings 15
Blocked Program alert 63
Blocked Zone
about 10
adding to 42
blocking
inappropriate Web content 142145
packet fragments 37
ports 4345
programs 37
Web content by category 139145
Blue Coat 139, 140
Blue Coat, mentioned 139
browser cache, cleaning 145
browser defaults, modifying 77
browser security 117
browser software, using 206
C
categories
allowing and blocking 140, 141145
Cerberian, mentioned 139
Challenged Mail 156
Changed Program alert 69
Changes Frequently 106
chat programs
Server Program alert and 206
using 206
check for update settings 14
clear text password 83
closing the ZoneAlarm security software application 7
code injection see suspicious behavior
types of 80
collaborative filter 154
color-scheme, changing 16, 17
COM protection 97
component control 95
components
managing 110
VPN-related 28
Components List 110
Configuration Wizard 12
contextual scan 129
contributing fraudulent e-mail 153
contributing junk e-mail 152
Control Center,overview 1??
CreateProcess 108
custom ports, adding 44
D
Date/Time
in Log Viewer 187
Day/Time
adding to expert rule 49
ranges, creating group of 53
decrypting 175
DefenseNet 12
destination
in expert rules 46, 48, 49
dial-up connection
configuring 85
disabling
Windows Firewall 37
disk encryption, stopping 177
disk encryption, uninstalling 177
display preferences, setting 15
Domain Name Server (DNS)
defined 225
in expert rules 52
incoming messages
determining source of 187
outgoing messages
default port permissions for 43
determining destination of 43, 187
required VPN resources 30
troubleshooting Internet connection 202
Driver event 101
drivers, loading 80
Dynamic Host Configuration Protocol (DHCP) messages
in Day/Time group 52
remote control programs and 210
Dynamic Real-time rating (DRTR) 141
E
eBay protection profile, creating 17
EBay, blocking 143
echo request
in expert rules 52
e-mail
fraudulent, reporting 153
junk, reporting 152
E-mail Filter toolbar 150
e-mail protection 147149
about 147
outbound 148
Encapsulating Security Payload (ESP) protocol
VPN protocols and 28, 37
event logging
about 182
customizing 185
turning on and off 183
excluding a process from scans 128
Execution event 101
expert firewall rules
about 46
creating 4849
editing 56
enforcement of 4647
for programs 111
managing 5456
ranking 55
tracking options for 55
expired, license 18
F
false positive detections 203
false positives 203
file and printer sharing
enabling 26, 84
network security and 38
server access and 72
troubleshooting 207
File event 101
file-specific scan 129
filter options, setting 109
filtering Web content 141
Firewall alert
determining source of 62
logging of 185
responding to 61
Firewall alerts 61
firewall protection 3356
about 33
advanced security options 3541
blocking and unblocking ports 43
expert rules and 4647
setting security level for 3435
FireWire 37
ForceField 117
ForceField Help 118
foreign language filters 154
formatting log file 184
fragments, blocking 37
fraudulent e-mail, see junk e-mail filter
Fraudulent Mail folder 153
FTP
programs, using 208
protocols, adding to expert rules 52
G
Game Mode 195
games
online, blocking access to 143
stopping alerts while playing 195
using with ZoneAlarm security software 208209
gaming software
suspicious behavior and 80
gateway
adding to the Trusted Zone 40
as Location type 51
forwarding or suppressing alerts 36
Internet Connection Sharing (ICS) and 27
default port permissions 43
security enforcement of 36
Generic Routing Encapsulation (GRE) protocol
mentioned 37
VPN protocols and 28, 31
glamour and lifestyle sites, blocking 143
government sites, blocking 143
groups
adding to expert rules 5054
H
Hacker ID
about 191
handle protection 95
hard drive encryption, troubleshooting 205
heartbeat messages
allowing 201
defined 226
dial-up connection, troubleshooting 201
heuristic scanning 125
heuristics 120
hibernation 173
High security setting
about 10
alert events shown in 183
allowing uncommon protocols 31
default port permissions in 4344
file and printer sharing 26
firewall protection and 35
for ID Lock 163
for Internet Zone 35
for Trusted Zone 35
logging options and 183
high-rated alerts 61
High-rated Suspicious Behavior alert 77
home network
Firewall alerts and 62
host file, locking 37
host name
adding to Trusted Zone 200
in list of traffic sources 39
Hotmail, special folders 150, 158
humor sites, blocking 143
Hypertext Transfer Protocol (HTTP)
in expert firewall rules 52
I
ID Lock 160168
overview 160
ID Lock alert 82
Identity Protection Center 160, 168
identity theft
protection from 160, 168
IGMP
in expert rules 46, 112
IMAP4
in expert rules 52
infected files
risk assessment of 131
Information reply 53
Information request 53
Informational alerts 60
Internet auction sites, blocking 143
Internet Connection Sharing (ICS)
alert options for 65
enabling 27
setting security options for 3536
Internet Control Messaging Protocol (ICMP)
message types 52
troubleshooting Internet connection 202
Internet Explorer
granting access permission to 206
Internet Key Exchange (IKE) protocol
VPN protocols and 28
Internet Lock 7
icon 7
Internet Lock alerts 64
Internet Service Provider (ISP)
heartbeat messages from 8, 201
in alert details 84
Internet Zone
adding networks to automatically 38, 39
networks, adding to automatically 23
permissions and 11
IP address
adding to the Trusted Zone 26, 27, 40
determining network type from 24, 25
hiding in submissions to Zone Labs 17
in expert rules 46
IP Security (IPSec) protocol
J
junk e-mail filter
and privacy 156
automatic reporting option 157
blocking company names 151
blocking mailing lists 152
blocking senders 151
Challenged Mail folder 156
collaborative filter 154
contributing junk e-mail 152
foreign language filters 154
Fraudulent Mail folder 153
Hotmail, and 150, 158
Junk Mail folder 153
message filtering options 154
message filters 154
protecting privacy 152, 153, 154
reporting fraudulent e-mail 153, 157
reporting junk e-mail 152
reports 158
special Outlook folders 150158
toolbar 150
wireless device support 157
Junk E-mail Filter, see junk e-mail filter 150
Junk Mail folder 153
K
keyboard and mouse
monitoring 79
keyboard shortcuts 215220
killing a program 105
known issues x
L
Layer 2 Tunneling protocol (L2TP)
license key
updating 19
license key, changing 19
license, expiration 18
Lightweight Directory Access protocol (LDAP)
local servers, blocking 37
Location 50
locations
adding to expert firewall rules 49
creating groups of 50
lock icon
in System Tray 7
lock mode, specifying 99
log entries
about 182
archiving 190
fields in 189
for Program alerts 185
for programs 185
formatting 184
options for 185
viewing 186, 188
Log Viewer
accessing 186
Lookup button 50
loopback adaptor
Low security setting
Changes Frequently option 106
file and printer sharing and 35
Zones and 34
lsass.exe 9
M
mail servers, connecting to 27
MailFrontier 152
MailSafe alert 62
manual file scan 129
MD5 Signature 106
defined 227
Medium security setting
about 10
alert events 183
alerts and 62, 71
customizing 11
file and printer sharing and 26
ID Lock and 163
Internet Zone and 34, 202, 207
networking and 27
port access and 44
program control and 94, 207
resource sharing and 200
Trusted Zone and 34, 40, 199
uncommon protocols and 37
medium-rated alerts 61
Message event 101
message filters 154
Microsoft Catalog Utilization 95
military sites, blocking 143
mime-type integrated objects
defined 228
Min security setting
Module event 101
More Info button 61, 66, 72, 76, 78, 82
keyboard shortcut for 220
MP3 sites, blocking 143
My Computer 48
myVAULT 163166
adding data to 163
editing and removing data 165
N
NetBIOS
defined 228
firewall alerts and 62
heartbeat messages and 201
High security setting and 35
network visibility and 199
Network Configuration Wizard
about 24
disabling 24, 25
Network News Transfer Protocol (NNTP) 52
network resources, sharing 23
network security options, setting 38
network settings
setting 38
New Network alert 83, 85
New Program alert 68, 75, 81
news and media sites, blocking 144
O
on-demand scan 129
OpenGL
and system crash 209
OpenProcess 108
OSFirewall
configuration 96
OSFirewall events
types of 101
customizing 148149
enabling 148
Outlook, and junk e-mail filter 150
P
packet
defined 228
expert firewall rules 46
in alerts 61
source of
determining 189
types, blocking 36
parameter problem
in expert rules 52
Parental Control ??145
about 139
allowing and blocking categories 141145
enabling 139, 140
setting preferences for 141
setting timeout options for 140
Smart Filtering and 140
Parental Controls 139
pass-lock permission
granting to a program 109
passwords
creating 13
VNCviewer and 210
pay-to-surf sites, blocking 144
PC Anywhere
PCAnywhere see remote control programs, using
permission
pass-lock 7, 98
passwords and 14
server 11
phishing 153
Physical Memory event 101
physical memory, changes to see suspicious
types of 80
ping messages
allowing in Internet Zone 201
and alerts 61
Point-to-Point Tunneling Protocol (PPTP)
policy 98
POP3
ports
1394 37
adding 44
blocking and unblocking 4344
default permissions for 44
preferences
for firewall protection 36
for Parental Control 141
keyboard shortcut 218
load at startup 201
preferences, setting 15
printers see network resources, sharing
private network
defined 229
Network Configuration Wizard and 24
virtual see Virtual Private Network (VPN)
Process event 101
product updates 20
product updates and upgrades 5
Program alerts 6573
responding to 98
Program Component alert 70
program components
managing 110111
Program Control 89209
about 89
Internet Lock and 99
setting level for 93
Zones and 11
program permissions 104
programs
adding to the programs List 105
creating expert rules for 111
stopping 105
trust level of 105
programs list
accessing 102
adding and removing programs 105
protection statistics 5
protocols
creating group of 51
default permissions for 43
in expert rules 37
mail 27
VPN 28, 31
proxy server
avoidance systems, blocking access to 143
troubleshooting Internet Connection 200
public network
defined 230
Network Configuration Wizard and 24
Q
quarantine, false positive 203
quarantine, troubleshooting 203
R
range of IP addresses
ranking expert firewall rules 47, 55
Real Networks
recovery disk, full disk encryption 175
recovery media, creating 175
redirect 52
Registry event 101
remote control programs, using 209
remote host computers
VPN configuration and 30
remove disk encryption 177
Repeat Program alert 69
reporting
fraudulent e-mail 153
junk e-mail 152
responding to alerts 8, 28
restoring security settings 15
restricting program access 105
risk assessment of infections 131
riskware 127
router advertisement 52
router solicitation 52
RTSP 52
S
scan mode 124
scan, on-demand 129
scanning for viruses ??132
scanning for viruses and spyware 129??
schedule scans 121
Secure Hypertext Transfer Protocol (HTTPS) 52
secured wireless network
Wireless Network Configuration Wizard and 25
security settings
backing up and restoring 15
sharing with Zone Labs see DefenseNet
send mail permission 107
Outbound MailSafe protection and 148
server permission
alerts and 71
chat programs and 206
column in programs list 105
default for traffic types 43
e-mail programs and 207
file sharing programs and 207
games and 208
granting to programs 106
streaming media programs and 210
Voice Over Internet programs and 211
Zones and 11
Server Program alert 64, 92, 206
server, program acting as 90
service control 96
services control 96
services.exe 9
shortcut menu 7
SKIP 28
Smart Filtering
about 139
enabling 139
SmartDefense 104
SmartDefense Advisor 62
about 191
browser permission and 72
defined 231
setting level for 98
submitting alerts to 66, 82
SMTP
software rendering mode 208
source
of traffic, determining 39, 182
spoolsv.exe 9
spyware
preventing 102
Status tab 4
stealth mode
defined 231
Stop button 7
system tray icon 7
subnet
entry type 40
VPN configuration and 30
subscription 5
Super access 105
supported hardware and software x
Suspicious Behavior alert 75
svchost.exe 9
system requirements x
T
Telnet 52, 210
TFTP 52
Timbuktu see remote control programs, using
time exceeded 52
Timestamp, Timestamp reply 53
timing attack prevention 95
toolbar, E-mail Filter 150
traceroute 53
tracking options
for expert firewall rules 48, 55
traffic sources
list of 39
managing 39
Transmission Control Protocol (TCP)
default port permission for 44
treating viruses 126
Trojan 92
Trojan horse 92
e-mail protection and 147
Program Control and 106
Troubleshooting 197202
TrueVector security engine 201
Trust Levels 104, 105
Trusted access 105
Trusted Sites list 166168
Trusted Zone
adding networks to automatically 38
adding to 40
Internet Connection Sharing (ICS) and 27
networks, adding to automatically 23
permissions and 11
VPN resources, adding to 28
U
UDP
Uninstalling ZoneAlarm 21
unsecured wireless network
Wireless Network Configuration Wizard and 25
updates, automatic antivirus 121
updating software 14
updating ZoneAlarm 20
User Forum x
V
video software
violent content, blocking 145
Virtual Private Network (VPN)
alerts 28, 74
Automatic Configuration alert 74
configuring connection 2731, 198
Manual Action Required alert 74
troubleshooting connection 197
virtualization 118
viruses
and archive files 132
scanning for 129132
treating 126, 131
updating signature files 121
VNC
VNC programs, using 210
VoIP programs, using 211
W
Web conferencing programs, using 211
web content, filtering 109
Who Is tab see Hacker ID
Windows Firewall, disabling 37
Windows Media
in expert rules 52
winlogon.exe 9
wireless network security options, setting 39
wireless network settings
setting 39
Z
Zone Alarm Fraudulent Mail, see junk e-mail filter
Zone Alarm Junk Mail, see junk e-mail filter, special
Outlook folders
Zone Labs security software
file sharing programs and 207
FTP programs and 208
loading at startup 16
updating 14
ZoneAlarm Challenged Mail, see junk e-mail filter
ZoneAlarm security software
about 7
closing the application 7
Zones
about 10
adding to 4041

Manual Usuario ZONE ALARM 9.1

Uploaded by

Copyright:

Available Formats

Manual Usuario ZONE ALARM 9.1

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Manual Usuario ZONE ALARM 9.1

Uploaded by

Copyright:

Available Formats

ZoneAlarm security software

Alert me - do not treat automatically

Try to repair, and alert me if repair fails

Try to repair, quarantine if repair fails (recommended)

Anti-virus protection not found

You might also like