The RTN 910 is an IP networking microwave radio that provides a unified platform for TDM, hybrid, and packet services. It can meet the network requirements of 2G, 3G, 4G, and LTE networks. The RTN 910 uses a split architecture with an indoor unit (IDU 910) and outdoor unit (ODU). It supports robust IP services and protections, as well as easy installation, maintenance, and network management.
The RTN 910 is an IP networking microwave radio that provides a unified platform for TDM, hybrid, and packet services. It can meet the network requirements of 2G, 3G, 4G, and LTE networks. The RTN 910 uses a split architecture with an indoor unit (IDU 910) and outdoor unit (ODU). It supports robust IP services and protections, as well as easy installation, maintenance, and network management.
The RTN 910 is an IP networking microwave radio that provides a unified platform for TDM, hybrid, and packet services. It can meet the network requirements of 2G, 3G, 4G, and LTE networks. The RTN 910 uses a split architecture with an indoor unit (IDU 910) and outdoor unit (ODU). It supports robust IP services and protections, as well as easy installation, maintenance, and network management.
The RTN 910 is an IP networking microwave radio that provides a unified platform for TDM, hybrid, and packet services. It can meet the network requirements of 2G, 3G, 4G, and LTE networks. The RTN 910 uses a split architecture with an indoor unit (IDU 910) and outdoor unit (ODU). It supports robust IP services and protections, as well as easy installation, maintenance, and network management.
TDM/Hybrid/Packet, provides several types of service interfaces and facilitate installation and fexible confguration. It can provide a solution that is integrated with the TDM microwave, Hybrid microwave, and Packet microwave based on the network requirements. Thus, RTN910 can meet the requirements of not only 2G and 3G networks, but also future 4G and LTE networks. The RTN 910 adopts a split structure. The system consists of the IDU 910 and the ODU, and IDU910 provides multiple features by put in different cards, and supports the convergence of up to 2 RF directions. The box size is 442mm(W)220mm(D)44mm(H) (1U). Architecture Features Unifed platform for TDM/Hybrid/Packet, meeting the requirements of network evolution towards All-IP backhaul Supports the processing and accessing of native TDM services, native Ethernet services and PWE3 services Supports multi-mode microwave radio: Hybrid mode (E1+Eth), pure Packet mode, PDH mode and SDH mode Provides packet-based IEEE 1588v2 clock synchronization, facilitating cost- effective clock solutions for 3G/LTE base stations Large-Capacity and Broadband-Oriented Microwave Platform Adopts highly efficient encapsulation and advanced header compression technologies, boosting the maximum capacity on one carrier to over 600Mbps Support XPIC technology Provides hitless switching from QPSK to 256QAM with Adaptive Modulation (AM), in all channels sizes and all frequencies, priority levels can be set for native E1 services and packet services Robust IP Service-Processing Capability Supports E-line or E-LAN services based on VLAN, QinQ. Supports E-line services based on PW Supports basic MPLS functions and service forwarding, and support static LSPs Adopts the LSP tunnel technology and the PWE3 technology to form an MPLS network, where multiple services can be accessed Supports 8-class QoS, provides a wide range of services, and ensures the quality of services of high priority Supports EOS* Supports Eth. LAG HUAWEI TECHNOLOGIES CO., LTD. RTN 910 RTN 910 (IDU 910) Supports abundant OAM features, including Eth. OAM, MPLS OAM, ATM OAM, PW OAM, making management and maintenance in IP networks similar to those in SDH networks Complete Protection Schemes Protections for radio links 1+1 HSB/SD/FD protections 2+0,1+1, 2x(1+0) protections XPIC 1+1 Network-level protections Ethernet Ring Protection Switching protection and MSTP protection LAG protection for Ethernet services MPLS 1:1 tunnel protection TDM SNCP protection (including SDH link and radio link) IMA protection for ATM over E1 services Linear MSP Equipment-level protections 1+1 hot backup for the power input Easy Installation The RTN 910 can be installed in a cabinet, on a desktop, or on a wall The RTN 910, 300 mm deep, can be installed in any standard telecom cabinet The RTN 910 and a wireless base station can share one cabinet Easy Maintenance Supports different types of loopbacks at the service port and the IF port Supports RMON performance events and the MPLS OAM functions Supports MPLS OAM, IEEE 802.1ag, IEEE 802.3ah Supports ATM OAM Provides a built-in test system to perform the pseudo-random binary sequence (PRBS) error test at the E1 port and the IF port Provides the hot-pluggable CF card, which stores data confguration fles and software. The CF card can be changed for data loading or software upgrade Supports remote data and software loading by using the NMS. Thus, the entire network can be upgraded rapidly, achieves in-service software upgrades Multiple Methods for Network Management Uses the iManager U2000 to manage the RTN devices and Huawei optical transport devices. Hence, quick fault locating, quick service provisioning, and visual IP service management are achieved, and the OPEX is reduced Uses the Web LCT to manage a single RTN NE or multiple RTN NEs in a centralized manner Enables users to query alarms and performance events through the simple network management protocol (SNMP) Adopts the inband DCN scheme. Hence, dedicated DCN channels are not required, and the network construction cost is reduced Technical specifcations Frequency Band 6GHz, 7GHz, 8GHz, 10GHz/10.5GHz, 11GHz, 13GHz, 15GHz, 18GHz, 23GHz, 26GHz, 28GHz, 32GHz, 38GHz Channel Spacing (MHz) 3.5MHz, 7 MHz, 14MHz, 28MHz, 40MHz, 56MHz Modulation Mode QPSK, 16QAM, 32 QAM, 64QAM, 128QAM, 256QAM Interface Type E1 interface TDM E1, Smart E1(CES E1, IMA E1 ML-PPP E1*) SDH interface STM-1 optical/ electrical interface, STM-4 optical interface* Ethernet interface FE interface: 10/100BASE-T(X), 100BASE-FX GE interface: 1000Base-SX, 1000Base-LX, 10/100/1000BASE-T(X) Auxiliary interface Order wire interface, external clock input/output interface, IEEE 1588v2 clock input/output interface Alarm interface External alarm 3 input/1 output interface Maximum Interface PDH interface: 96E1 SDH interface: 6STM-1, 4STM-4* Ethernet interface: 20FE , 6GE Maximum Capacity Switching capacity: 4.2Gbit/s TDM cross connection capacity: 88VC-4, full timeslot cross-connections at the VC-12/VC-3/VC-4 level RF Direction A maximum of 2 RF directions Confguration 2* (1+0) confguration 2+0 confguration 1+1 confguration XPIC confguration 1+1 confguration: 1+1 HSB, 1+1 FD, 1+1 SD, XPIC 1+1 Ethernet Function Ethernet II, IEEE 802.3, and IEEE 802.1q/p service frame formats E-Line and E-LAN Ethernet services Adding, deletion, and exchange VLAN tags (IEEE 802.1q/p) Flow control ( IEEE 802.3x) Link aggregation group (LAG) RMON ( IETF RFC 2819) PWE3 Simulation of TDM E1 and ATM/IMA E1 services Encapsulation of Ethernet services over LSP tunnel, support E-Line Static PW QoS IP DSCP/IP TOS, MPLS EXP, VLAN 802.1p CAR and traffc policing in color-blind or color-aware mode 8 classes for queue scheduling MPLS Capacity Number of VLAN tags: 4,094 Number of tunnels (including MPLS tunnel, TMPLS tunnel, IP tunnel, and GRE tunnel): 1024 Number of CESs: 80 Number of PWs: 1,024 Number of E-lines: 1,024 Number of APS protection groups: 32 Dimensions and Weight Dimensions: 442 mm (width) x 220 mm (depth) x 44 mm (height) Weight:5.5kg Working Temperature IDU 5C ~ +60C ODU 33C ~ +55C Relative Humidity IDU 5% ~ 95% ODU 5% ~ 100% Power Supply 38.4 V ~ 72 V Heat Dissipation Fan cooling Maximum Working Altitude 4,500 m
