Fundamentals of Telecommunications

Fundamentals of
Telecommunications

Overview

Sometimes, when attending a class, it is okay to miss the first half- hour. After all,
we do know something about the subject, and that first half- hour is likely to carry
little more than introductory information. The same holds true when picking up a
textbook on a particular subject. Maybe the first chapter can be skipped; again, it
contains introductory material that we already know.

But often this is not the case. We do not know as much as we thought we knew,
and that first half- hour, or that first chapter, contains material that may well be
prerequisite material. That is what this Web ProForum tutorial is all about. It
provides the equivalent of that first half- hour or that first chapter and may well
be valuable in understanding the other tutorials in this series. The tutorial will
cover the fundamentals of telephony, from its inception in Alexander Graham
Bell's laboratory to today's emerging technologies.

Topics

1. History and Regulation of the Telephone Industry
2. Network
3. Switching Technology
4. Transmission Media
5. Transmission Technology
6. Broadband Access and Service
7. Wireless
Self- Test
Correct Answers
Glossary

Web ProForum Tutorials
http://www.iec.org
Copyright
The International Engineering Consortium
2/26

1. History and Regulation of the
Telephone Industry
"Mr. Watson, come here, I want you." With these historic words Alexander
Graham Bell called to his assistant Thomas Augustus Watson over the so-called
"telephone," and an industry was born.
The place: 5 Exeter Place, Boston, Massachusetts
The time: evening, March 10, 1876
As with all inventions, the road had not been smooth. For years, Graham Bell (as
he liked to be called) had been experimenting with a harmonic telegraph. It
should be possible, he reasoned, to send six tones over the same wire at the same
time and cause six reeds attached to the receiving end to be operated.
Furthermore, if all worked well, varied combinations of these six pitches could
reproduce human speech.
Simultaneously he was working on a scheme that utilized the varying resistance
of a wire. A diaphragm, which would be vibrated by the human voice, was
attached to a wire that was dipped into a mixture of acid and water. In theory, as
the diaphragm moved downward, forcing more wire into the acid, the resistance
of the wire would be decreased. As the diaphragm moved upward, the wire would
be withdrawn from the conducting liquid, and its resistance would be increased.
It was this device that was ultimately successful and that formed the basis for the
telephone industry for many years.
A year later, on July 9, 1877, the Bell Telephone Company was formed, and
Alexander Graham Bell became the company's electrician, at a salary of $3,000,
and Watson became superintendent in charge of research and manufacturing.
Unfortunately for Bell, the basic patents were due to run out in 1893 and 1894.
But by this time, Theodore Newton Vail had been brought in as general manager,
and he immediately set about establishing an organization strong enough to
survive without a monopoly. "What we wanted to do was get possession of the
field in such a way that, patent or no patent, we could control it," Vail said. The
first step was to obtain a captive manufacturing facility, and this was
accomplished in 1881 with the purchase of Western Electric Company.
Vail also sent his salesmen into the field to set up telephone exchanges in virgin
territory. Generally, local promoters were encouraged to organize a local
telephone company and sell stock. Thus, by 1885 Vail had established a vertically
integrated supply division, a network of companies licensed by the parent, and a
strong research and development arm. The expiration of Bell's basic patents in
1893 and 1894 was the starting signal for open competition. Independent
telephone operating companies sprang up throughout the country; by the turn of
the century there were approximately 6,000 of them, and these 6,000 provided

Copyright
3/26

service to some 600,000 subscribers. Through the years, mergers and
acquisitions took their toll; at the present time there are approximately 1,300
local exchange carriers.
Unfortunately for the general public, all of these telephones were not
interconnected. Therefore, it was necessary for a subscriber to have two or three
instruments to communicate with the total population of the city. However, the
great asset of AT&T, which became the official name of the company at the end of
1899, was the control of all the long-distance circuits and its steadfast refusal to
interconnect any other company to it.
This would never do, and the Justice Department filed suit in 1912. The world
was angry with AT&T, and an AT&T vice presidentNathan C. Kingsbury
realized it. He recognized that the best demonstration of AT&T not being in a
monopoly position was to point to thousands of independents apparently
operating in harmony. To this end, AT&T agreed to provide interconnection
arrangements to all independents. This 1913 agreement was henceforth called the
Kingsbury Commitment.
By 1934 telecommunications had become so important to the country that
Congress passed a Communications Act and, simultaneously, created the Federal
Communications Commission (FCC). The section of this Act that has turned out
to be most important has to do with what we now call universal service. It said:
"For the purpose of regulating interstate and foreign commerce in
communication by wire and radio so as to make available, so far as possible, to all
the people of the United States a rapid, efficient, nationwide, and worldwide wire
and radio communication service with adequate facilities at reasonable charges."
As a result of this principle, a support structure has been established whereby
certain groups of subscribers (e.g., long-distance users, business subscribers,
subscribers in locations where telephone service can be provided with relative
ease, etc.) will pay more than true costs, and other groups of subscribers (e.g.,
subscribers in rural and other high-cost locations) will pay less than true costs.
In 1949 the Justice Department again filed suit against AT&T, claiming that
Western Electric charged inordinately high prices from their customers (i.e., the
operating telephone companies owned by AT&T), thus making it possible for the
operating telephone companies to charge their subscribers inappropriately high
rates. The suit dragged on, and a consent decree was reached in 1956. AT&T won;
Western Electric need not be divested from AT&T, the Bell System would engage
only in telecommunications business, and nonexclusive licenses would be
granted to any applicant on fair terms. This was the final judgment. The eventual
breakup of the Bell System in 1984 was accomplished through a modification of
this final judgment, hence the modification of final judgment (MFJ).

Copyright
4/26

Although the Bell System appeared to be the winner in this 1956 suit, over the
next two decades it would lose battles, one at a time. There was the Hush-A-
Phone case in 1955; the Carterfone case in 1968; MCI's "above 890" case in 1959,
and the MCI case dealing with a long-distance route from Chicago to St. Louis in
1969. In November, 1974, the Justice Department once again filed suit to break
up the Bell System. The case trudged on until 1978, when Judge Harold Greene
took over. He moved things quickly, and on January 4, 1982, a terse
announcement was issued by the Justice Department and AT&T saying that
negotiations had been reopened. Then, on January 8, 1982, the news broke;
AT&T had agreed to break up its $136.8 billion empire. It was agreed that AT&T
would divest the local parts of the Bell operating telephone companies. It would
keep its manufacturing facilities and its long-distance network. The agreement
would take effect on January 1, 1984.
The 22 regional Bell operating companies (RBOCs) agreed to form 7 regional
holding companies (Bell Atlantic, NYNEX, BellSouth, Ameritech, U S WEST,
Pacific Telesis, and Southwestern Bell). The agreement also said that the Bell
operating companies would not be allowed to manufacture nor would they be
allowed to get in the long-distance business within their territories. AT&T would
not be allowed to get in the local-exchange business nor to acquire the stock or
assets of any RBOC.
That remained the state of affairs until the passage of the 1996
Telecommunications Act. This Act threw most of the rules established in 1984 out
the window and left the implementation of the Act to the FCC. There have been
problems ever since. What did the Congress mean by "promote competition?"
Should AT&T be allowed to get in the local-exchange business? (Answer: yes.)
Should the RBOCs be allowed to get in the long-distance business? (Answer: yes,
but only after passing a 14-point checklist.) What did expanded universal
service mean? Should the RBOCs be allowed to merge? (Answer: yes. Bell
Atlantic has merged with NYNEX; Southwestern Bell [SBC] has merged with
Pacific Telesis and is planning to merge with Ameritech. Bell Atlantic intends to
merge with GTE. If all of these are ultimately approved, there will remain four
RBOCs). To date, many questions remain, and there is no assurance that they will
be answered in the foreseeable future.
2. Network
If there were only three or four telephones in a locale, it would make sense to
connect each phone to all other phones and find a simple method of selecting the
desired one. However, if there are three or four thousand phones in a locale, such
a method is out of the question. Then it is appropriate to connect each phone to
some centrally located office and perform switching there. This switching could
be a simple manual operation using plugs and sockets or could be done with

Copyright
5/26

electromechanical devices or with electronics. In any case, this central-office (CO)
solution is the one that has been chosen by the telecommunications industry.
As we connect each of these thousands of telephones to the central office, we have
what is a star configuration; all lines are particular to one and only one station,
and all terminate on the nucleus of this starthe CO.
These connections are called the local exchange plant, and the telephone
company handling this function is called the local exchange carrier (LEC). The
connections themselves are often called the "local loop;" at other times we refer
to them as "the last mile." In more technical terms, the section closest to the
customer's premises is called the distribution plant and that section closest to the
CO, the feeder plant (see Figure 1).
Figure 1. Particular Names Are Applied to the Various Parts of
the PSTN; End Offices Are Class-5 Offices; Toll Tandem Offices
Are Generally Class-4 Offices

(Note: This is certainly a generalization, as will be much that follows. Although
the feeder plant usually consists of one or more cables leading to some point of
demarcation [a terminal box or an enclosure] after which the lines are spread out
going in many smaller cables to the customer premises [the distribution plant],
there are cases where there is no need for a point of demarcation. Then what do
we call the plant? We will not struggle with such semantic difficulties here.)
But what if a particular telephone call is not originated and terminated within the
particular CO's geographic coverage? How do we get to another city or another
state or even another country?

Copyright
6/26

The answer, of course, is to connect these COs to a higher-echelon CO (see Figure
2). We apply numbers to these levels of offices; the local office, also called the end
office, is called a Class-5 office. The office to which it connects is called the Class-
4 office. The top level, the Class-1 office, appears in only a few places in the
country. Please note that the only office that has people as its subscribers is the
Class-5 office. The other offices in this hierarchy have lower-level COs as their
subscribers. Those lines connecting switching offices to switching offices, rather
than to subscribers, are called trunks.
Figure 2. The Hierarchy of Switching Systems in its Most Basic
Form Consists of Five Classes of Offices

This section of the telephone infrastructurethe section leading upward from the
Class-5 officesis handled not by the LECs but by the interexchange carriers
(IXCs), the long-distance carriers. This entire structure has been titled the
"hierarchy of switching systems." The total network is called the public switched
telephone network (PSTN).
In days of old there was only one long-distance carrierAT&T. Hence, any time a
telephone number was dialed with an area code up-front, the LEC knew that it
must be handed off to AT&T. But then came MCI, Sprint, and hundreds of other
long-distance carriers. What was an LEC to do with a particular long-distance
call? To whom should it be handed off? This was and is a technical challenge. In
political terms, it was called "equal access," which means that a requesting long-
distance carrier could require that the LEC examine the number and hand off the
call to the proper long-distance carrier. This handoff was from the CO of the LEC
to the point of presence (PoP) of the IXC. This PoP could be in a building
adjacent to the telco's CO, or it could be in some convenient site in the suburbs
where it could serve several of the telco's COs. The pure hierarchy of switching

Copyright
7/26

systems was becoming somewhat corrupted; new hierarchies in the long-distance
part of the network were being applied on top of the old one.
Although it is not pertinent to the topology of this network, it should be
recognized that the interconnections between these various COs can be twisted
copper-pair carrier systems utilizing copper pairs (e.g., T1), microwave, satellites,
and certainly fiber.
However, this hierarchical network is not the only network in the telephone
system of today. There are many others including the following:
A local-area network (LAN) is a limited-distance network connecting a
defined set of terminals. It could connect workstations in an office,
offices in a building, or buildings on a campus.
A wide-area network (WAN) links metropolitan or local networks,
usually over common carrier facilities.
The intelligent network is a concept that centralizes a significant
amount of intelligence rather than installing this intelligence in
individual COs. For instance, how does a particular CO know which
long-distance carrier is to receive a particular call?
The synchronous optical network (SONET) is a particular set of
standards that allows the interworking of products from different
vendors. It usually embodies a fiber-optic ring that will permit
transmission in both directions.
The Internet is really quite different from the network we have been
describing. It is a packet network (rather than a circuit-switched
network), but, as has been discussed, it is an overlay network.
The common channel signaling network is especially important; it
works closely with the PSTN. We also apply the term out-of-band
signaling. In the original PSTN, signaling (e.g., call setup) and talking
utilized the same common trunk from the originating switching system
to the terminating switching system. This process seized the trunks in
all of the switching systems involved. Hence, if the terminating end was
busy, all of the trunks were set up unnecessarily. In the mid-1970s, the
common channel signaling network was established; it utilizes the
protocol called signaling system 7 (SS7). With this system, a talking
path was not assigned until all signaling had been satisfactorily
completed. This network, incidentally, was and is a packet network
rather than a circuit-switched network.

Copyright
8/26

The PSTN we have been describing utilizes a star configuration. However, this is
not the only configuration being applied in today's telecommunications world.
The cable-television (CATV) companies, for instance, use a tree-and-branch
technology. In this case, the head end (equivalent to the CO) receives
programming from satellites and sends all signals downstream, out on the trunk.
At various points along the way, branches extend outward, toward various
neighborhoods. These branches are split several more times before the coaxial
cable (the media of choice in past CATV systems) reaches the customer's
premises. Frequently the signals must be amplified along the way, and therefore
power must be sent along with the TV signal. In any case, because the intent of
the CATV system is broadcastthat is, send the signal to everyonethere is no
need to send an individual and distinct wire to each and every subscriber, as was
the case with the telephone system.
However, this methodology has proven to be disadvantageous to the CATV
companies, because it is extremely difficult to send signals upstream. Of course,
in a telephone system, signals (voices) must be sent in both directions. CATV
companies are spending billions of dollars to upgrade their systems not only by
utilizing fiber instead of the coax but by adding electronics to the many nodes
that permit both upstream and downstream transmission.
3. Switching Technology
The PSTN we have been describing has a star configuration. Local loops (usually
one per subscriber) terminate in a CO. This CO completes connections from one
local loop to another local loop, or from one local loop to a trunk that terminates
on some other CO. This CO has gone through a number of fundamental
technological changes (see Table 1).
Table 1. Types of End-Office Switching and Their Evolution
Switching
System Operation
Method of
Switching Type of Control
Type of
Network
1878 manual
operator
manual space/analog human plug/cord/jack
1892 step-by-step electromechanical space/analog distributed stage-by-
stage
stepping switch
train
1918 cross-bar electromechanical space/analog common control X-bar switch
1960 ESSfirst
generation
semielectronic space/analog common control reed switch
1972 ESSsecond
generation
semielectronic space/analog stored program
control
reed switch
1976 ESSthird
generation
electronic time/digital stored program
common control
pulse code
modulation

Copyright
9/26

The manual system required, of course, constant attention from operators (see
Figure 3). In the late 1800s, telephone calls were connected manually at the CO.
When a call came in, an attendant would plug into a horizontal bar line. He then
would yell to the operator who handled the customer being called, and that
second operator would connect to the bar and finish setting up the call. When the
call was completed, another operator would yell to all in the room that the line
was clear again. The step-by-step system, which is still in operation in many parts
of the country, utilized what is known as the Strowger switch. The intelligence in
the system was located in relays mounted on each switch. The switch itself
responded to the dial pulses of the rotary dial.
Figure 3. A Depiction of an Early CO

The crossbar system was still electromechanical in nature, but the intelligence of
the system was separated from the actual switch. Thus, this common control
could be used repeatedly to set up and tear down calls and never sit idle.
When electronics came along, the electromechanical control of the common
control system was replaced with electronics, and the network, or matrix, was
usually replaced with tiny glass-encapsulated reed switches. Hence, only a part of
the switch was electronic. In the next generation, the stored program operation of
a digital computer was applied to the switch, although the network remained a
complex of reed switches. In the final generation, called a digital switch, the
talking path was no longer an electrically continuous circuit; rather the speech
being carried was digitized into a stream of "1s" and "0s." Notice that this final
generation depicted a significant change from the previous generations in that
there was no longer an electrical talking path through the switch. We were, in
fact, operating in a digital (rather than analog) domain.

Copyright
10/26

However, whether the system was analog or digital, one thing must be
recognized: there was an actual talking patha circuitfrom the calling party to
the called party. This talking path was established at the beginning of a call and
held for the duration of a call. We call it circuit switching. This system is not
actually efficient. When I am talking, you are listening, and the circuit is being
used in only one directionthat is, 50 percent. When you are talking and I am
listening, it is still 50 percent. When neither of us is talking, or when there is
silence between words, the efficiency is 0 percent.
There is, however, a different kind of connection, and we see it today in a number
of applications:
credit-card verification
automated teller machine
SS7
Internet and the World Wide Web
This system is called packet switching (as opposed to circuit switching). In a
packet-switching system, the information being transmitted (be it data or
digitized voice) is not sent in real time over a dedicated circuit; rather it is stored
in a nearby computer until a sufficiently sized packet is on hand. Then a very
smart computer seizes a channel heading in the general direction of the
destination, and that packet of data is transmitted at very high speeds. Then the
channel is released. So, except for some necessary supervisory information
(destination, error checking codes, etc.) the channel is 100 percent efficient.
When the distant station gets that message no more than a few milliseconds later,
it responds with the necessary handshaking informationagain, by accumulating
a packet of data, seizing a channel, and bursting the information out over that
channel. Again, 100 percent efficient.
As mentioned earlier, the packet networks in the world (actually overlay networks
to the PSTN) are being used extensively for data; only recently are we seeing
them being used for voice. As systems are perfected, this also will change.
4. Transmission Media
There are four types of media that can be used in transmitting information in the
telecommunications world:
copper wire
coaxial cable (actually an adaptation of copper wire)

Copyright
11/26

fiber
wireless
In days of old, copper wire was the only means of transmitting information.
Technically known as unshielded twisted pair (UTP), this consisted of a large
number of pairs of copper wire of varying size in a cable. The cable did not have a
shield and therefore the signalprimarily the high-frequency part of the signal
was able to leak out. Also, the twisting on the copper pair was very casual,
designed as much to identify which wires belonged to a pair as to handle
transmission problems. However, this is the way it was done, and for voice
communications it was quite satisfactory. Consequently, there are millions of
miles of copper in the PSTNmiles that must be used.
Not only did the copper cable itself have limitations, but things were done to this
cable to make it even more unsuitable for high-speed data transmission. These
actions primarily took two forms:
loadingLoad coils were frequently added to loops longer than
18,000 feet. These load coils were essentially low-pass filters. That is,
they passed without attenuation all voice frequencies but effectively
blocked frequencies above the voiceband. This is disastrous for data
communications, which depend on high frequencies to achieve the
desired speed of transmission.
bridge tapsA bridge tap is any unterminated portion of a loop not
in the direct talking path. A bridge tap may be a used cable pair
connected at an intermediate point or an extension beyond the
customer. For example, a drop wire that provided a second line to a
home is left in place even after the second set of customer premises
equipment (CPE) is removed. Records of this were not always kept and
assigning a particular copper pair to a high-speed data circuit is far
from a sure thing. Bridge taps do nasty things to data transmission.
Coaxial cable consists of a single strand of copper running down the axis of the
cable. This strand is separated from the outer shielding by an insulator made of
foam or other dielectrics. A conductive shield covers the cable. Usually an outer
insulating cover is applied to the overall cablethis has nothing to do with the
carrying capacity of the cable. Because of the construction of the cable, obviously
coaxial in nature, very high frequencies can be carried without leaking out. In
fact, dozens of TV channels, each 6 MHz wide, can be carried on a single cable.
The fact that a coaxial cableor coaxcan support a tremendous bandwidth has
not been lost on the CATV folk. A leader of the CATV industry said, some years
ago, "We have more bandwidth by accident than the telephone people have on

Copyright
12/26

purpose." Indeed, that is correct; piggybacking a telephone channel on a coax
cable is no challenge at all.
Fiber is the third transmission media, and it is unquestionably the transmission
medium of choice. Whereas transmission over copper utilizes frequencies in the
megahertz range, transmission over fiber utilizes frequencies a million times
higher. This is another way of saying that the predominant difference between
electromagnetic waves and light waves is the frequency. This difference, in turn,
permits transmission speeds of immense magnitudes. Transmission speeds of as
high as 9.9 Gbps have become commonplace in the industry today. At this speed,
the entire fifteen-volume set of Encyclopedia Britannica can be transmitted in
well under one second.
Laying fiber, on a per-mile basis, still costs somewhat more than laying copper.
However, on a per-circuit basis there is no contest; fiber wins hands down.
However, if a local loop is being laid to a residence, there is little justification to
installing fiberthere will never be a need for more than one or two or three
circuits. This realization has led to a transition in our thinking. Shortly after the
commercialization of fiber, we talked about fiber-to-the-home (FTTH). It was
then realized that there was little need to install fiber for a final several hundred
yards, so the industry shied away from fiber-to-the-curb (FTTC). In such a
system, fiber would carry a plurality of channels to the "curb," whereupon they
would be broken down and applied to the copper drop leading to the home. In
many cases even this was overkill, and fiber-to-the-neighborhood (FTTN) is now
being used. The message is clear: apply fiber when it is economical to do so, and
otherwise rely on copper.
One final approach is being used in many areas, and it often proves workable.
This is a combination of fiber and coax or, as it is known, hybrid fiber/coax
(HFC). As we have seen, coax has a greater bandwidth than copper but a smaller
one than fiber. Also, in some 60 percent of the homes in the United States, coax
in the form of CATV goes to the home; tying fiber to coax for the final several
hundred yards makes technological sense.
Fiber comes in several forms; the two predominant ones are multimode and
single-mode (see Figure 4). As can be seen, the total strand diameter for both is
about 125 microns (a micron is a millionth of a meter). However, the ultrapure
glass that forms the core transmission medium is between 50 and 62.5 microns
for the multimode fiber and about 8 to 10 microns for the singlemode fiber. One
would think that the multimode fiber would have a greater carrying capacity;
however, just the opposite is true. With single-mode fiber, only one ray or mode
can travel down the strand, and this makes for a simpler job in regenerating the
signal at points along the span. In fact, single-mode fiber makes up the majority
of today's long-distance network.

Copyright
13/26

Figure 4. Optical Fiber Sizes

The tremendous capacity of fiber certainly makes for more efficient
communications; however, placing so much traffic on a single strand makes for
greater vulnerability. Most of the disruptions in the long-distance network are a
result of physical interruption of a fiber run. It is called backhoe fade.
Wireless communications is the final option as a transmission medium. This can
take several forms: microwave, synchronous satellites, low-earth-orbit satellites,
cellular, personal communications service (PCS), etc. Some of these will be
described in more detail later. In every case, however, a wireless system obviates
the need for a complex wired infrastructure. In the case of synchronous satellites,
transmission can take place across oceans or deserts. With microwave there is no
need to plant cable, and in mountainous territories this is a significant advantage.
Cellular and PCS afford mobility. There are advantages and disadvantages to
each.
5. Transmission Technology
Most transmissionat least most transmission in the local exchange plantis
analog in nature. That is, the signal being transmitted varies continuously, both
in frequency and in amplitude. A high-pitched voice mostly contains high
frequencies; a low-pitched voice contains low frequencies. A loud voice contains a
high-amplitude signal; a soft voice contains a low-amplitude signal.
In the long-distance network, and more and more in the local exchange plant,
digital transmission is being used. A digital signal is comprised of a stream of 1s
and 0s that portray the analog voice signal by means of a code.
Analog signals can be combined (i.e., multiplexed) by combining them with a
carrier frequency. When there is more than one channel, this is called frequency
division multiplexing (FDM). FDM was used extensively in the past but now has

Copyright
14/26

generally been replaced with the digital equivalent: time division multiplexing
(TDM). The most popular TDM system is known as tier 1 (T1). In a T1 system, an
analog voice channel is sampled 8,000 times per second, and each sample is
encoded into a 7-bit byte. Twenty-four such channels are mixed on these two
copper pairs and transmitted at a bit rate of 1.544 megabits per second. T1
remains an important method of transmitting voice and data in the PSTN (see
Figure 5).
Figure 5. Pulse Code Modulation (PCM) Sampling, Quantizing,
and Encoding Process: In This Example, a 3-Bit Encoding
Scheme Is Used for Quantizing the Total Amplitude

Such a digital transmission scheme (and certainly there are modifications of it
that improve efficiency, capacity, or quality, etc.) works hand in glove with the
digital-switching schemes we talked about previously. Those 1s and 0s need not
be transmitted through an actual circuit in that switch; rather, one can simply
turn on and off the various electronic devices that make up that switch.
Thus a talking path (i.e., a switched circuit) in the PSTN can be either analog or
digital or a combination thereof. In fact, a digital signal can be transmitted over a
packet-switched network as easily as a circuit-switched network. Now if we
consider the next step, we see that digitized voice is not very different from data,
and if data can be transmitted over a packet network, then so can digitized voice.
This, of course, is now known as voice over the Internet. The challenge, of course,
is to get the transmitted signal to the destination fast enough. After all, this may
well be a time-sensitive voice conversation. A second challenge is to get each
packet, which is a small piece of a voice conversation, to the destination in the

Copyright
15/26

proper order. Progress is being made, and we can well believe that packet
switching will play an important role in the PSTN of tomorrow.
6. Broadband Access and Service
Transmission in the telecommunications networks of today is, more and more,
digital in nature, and the transmission medium of choice is fiber. "Digital,"
however, does no more than imply a string of 1s and 0s racing through the
network. But how are these 1s and 0s to be arranged? At what speed are they to
travel? What route should they take? Answers to questions such as these have
taken many forms and have made for the most complicated aspect of the
telecommunications business.
There has never been a scarcity of coding schemes in the industry. Starting with
Morse code, going to the Baudot code, then the ASCII code, we have seen each
providing for better transmission and higher quality. In this section we will
discuss the most popular and important three codes.
SONET
SONET is a standard for optical telecommunications transport. The SONET
standard is expected to provide the transport infrastructure for worldwide
telecommunications for at least the next two or three decades. It defines a
technology for carrying many signals of different capacities through a
synchronous optical hierarchy. The standard specifies a byte-interleaved
multiplexing scheme. The synchronous optical hierarchy mentioned is shown in
Table 2.
Table 2. SONET Hierarchy
Signal Bit Rate Capacity
OC192 9953.280 Mbps 5376 DS1s
OC48 2488.32 Mbps 1344 DS1s
OC12 622.080 Mbps 336 DS1s
OC3 155.520 Mbps 84 DS1s
OC1 51.840 Mbps 28 DS1s
OC = optical carrier
The DS1 channel can carry twenty-four voice circuits, each called a DS0
The SONET standards govern not only rates, but also interface parameters;
formats; multiplexing methods; and operations, administration, maintenance,
and provisioning (OAM&P) for high-speed transmission. We most often hear of
SONET rings in which fiber strands are strung around a metropolitan area in a

Copyright
16/26

ring configuration. The system is designed so that transmission can take place in
either direction; should there be a fault at any one location, transmission will
immediately take place in the opposite direction. That is, the system is self-
healing.
ATM
Asynchronous transfer mode (ATM) is a high-performance switching and
multiplexing technology that utilizes fixed-length packets to carry different types
of traffic. Information is formatted into fixed-length cells consisting of 48 bytes
(8 bits per byte) of payload and 5 bytes of cell header. The fixed cell size
guarantees that time-critical information (e.g., voice or video) is not adversely
affected by long data frames or packets. Of course, if the cells were longer in
length the system would be more efficient, because the header would take up a
smaller percentage of the total cell.
Multiple streams of traffic can be multiplexed on each physical facility and can be
managed so as to send the streams to many different destinations. This enables
cost savings through a reduction in the number of interfaces and facilities
required to construct a network.
ADSL
Asymmetric digital subscriber line (ADSL) is, essentially, a modem that employs
a sophisticated coding scheme. This coding scheme permits transmission over
copper pairs at rates as high as 6 Mbps for distances of 9,000 to 12,000 feet.
Speeds of this magnitude bring to mind television signals; a 6Mbps channel can
easily handle a television movie.
ADSL succeeds because it takes advantage of the fact that most of its target
applications (video-on-demand, home shopping, Internet access, etc.) function
perfectly well with a relatively low upstream data ratehence the word
asymmetric. LECs are now using ADSL as an access technology for their
television businesses and for Internet access.
7. Wireless
The first commercially available radio and telephone system, known as improved
mobile telephone service (IMTS), was put into service in 1946. This system was
quite unsophisticatedbut then there was no solid state electronics available.
With IMTS, a tall transmitter tower was erected near the center of a metropolitan
area. Several assigned channels were transmitted and received from the antenna
atop this tower. Any vehicle within range could attempt to seize one of those

Copyright
17/26

channels and complete a call. Unfortunately, the number of channels made
available did not come even close to satisfying the need. To make matters worse,
as the metropolitan area grew, more power was applied to the transmitter or
receiver, the reach was made greater, and still more erstwhile subscribers were
unable to get dial tone.
The solution to this problem was cellular radio. Metropolitan areas were divided
into cells of no more than a few miles in diameter, each cell operating on a set of
frequencies (send and receive) that differed from the frequencies of the adjacent
cells. Because the power of the transmitter in a particular cell was kept at a level
just high enough to serve that cell, these same sets of frequencies could be used at
several places within the metropolitan area. Beginning in 1983, two companies,
one called a wireline company and the other called a nonwireline carrier, were
given a franchise to operate in each major territory.
Two characteristics of cellular systems were important to their usefulness. First,
the systems controlled handoff. As subscribers drove out of one cell and into
another, their automobile radios, in conjunction with sophisticated electronic
equipment at the cell sites (also known as base stations) and the telephone
switching offices (also known as mobile telephone switching office [MTSO] ),
transferred from one frequency set to another with no audible pause. Second,
systems were also designed to locate particular subscribers by paging them in
each of the cells. When the vehicle in which a paged subscriber was riding was
located, the equipment assigned sets of frequencies to it, and conversation could
begin (see Figure 6).

Copyright
18/26

Figure 6. In a Cellular System, Vehicle-to-Cell-Site
Communications Take Place Using FDMA, TDMA, CDMA, GSM,
etc.; Communications between the Cell Site and the MTSO
Utilize Conventional Techniques

The initial transmission technology used between the vehicle and the cell site was
analog in nature. It is known as advanced mobile phone service (AMPS). The
analog scheme used was called frequency division multiple access (FDMA).
But the age of digital transmission was upon us, and many companies operating
in this arena concluded that a digital transmission scheme would be preferred.
The result was time division multiple access (TDMA). In Europe, the selected
scheme was an adaptation of the TDMA used in the United States, and it was
called groupe special mobile. Since then, the name has been changed to global
system for mobile communications (GSM).
As if that was not enough, a third group of companies determined that a special
spread-spectrum or frequency-hopping scheme would be even better, and this
also was developed and trialed. This is called code division multiple access
(CDMA). Thus, there are at least four schemes that may be used for
communications between a vehicle and the cell site. Communications between
the cell site and the MTSO utilized more conventional techniques, such as
microwave, copper pairs, or fiber optics.

Copyright
19/26

The continuing growth of cellular communications (there are presently about
20,000 new subscribers signing on each day), led government and industry in the
United States to search for additional ways to satisfy the obvious need not only
for ordinary telephone service but also for special services and features, smaller
telephones, and cellular phone use. This search led to the PCS industry.
Additional frequency bands were allocated for their use, and rather than assign
them to the first comers or by way of a lottery, the FCC auctioned them off
through a sophisticated bidding contest that brought the U.S. treasury billions of
dollars.
Geosynchronous satellites represent yet another way of providing wireless
communications. These satellites, located 22,300 miles above the earth, revolve
around the earth once each twenty-four hoursthe same as the earth itself.
Consequently they appear to be stationary. Communications between two places
on earth can take place by using these satellites; one frequency band is used for
the uplink, and another for the downlink. Such satellite systems are excellent for
the transmission of data, but they leave something to be desired for voice
communications. This is a result of the vast distance and the time it takes for an
electrical signal to make an earth-satellite-earth round trip. That time amounts to
one quarter of a second. A reply from the called subscriber takes another quarter
of a second, and the resultant half a second is definitely noticeable. Consequently,
voice communications is seldom carried via geosynchronous satellites.
Yet another wireless telecommunications technology is the low earth orbit (LEO)
satellite system. LEOs are satellites that communicate directly with handheld
telephones on earth. Because these satellites are relatively lowless than 900
milesthey move across the sky quite rapidly.
In a LEO system the communications equipment on a satellite acts much like the
cell site of a cellular system. It catches the call from earth and usually passes it to
an earth-based switching system. Because of the speed of the satellite, it is
frequently necessary to hand off a particular call to a second satellite just rising
over the horizon. This is akin to a cellular system, except that in this case it is the
cell site that is moving rather than the subscriber.
Several systems are now in the planning stage, and in fact many satellites have
already been launched. The most noted is Iridium, created by Motorola, which
would utilize sixty-six satellites. A second system, called Globalstar, would
employ forty-eight satellites. There are at least two or three others that are well
advanced in terms of preparations to launch.

Copyright
20/26

Self-Test
1. Alexander Graham Bell called his first telephone a synchronous telegraph.
a. true
b. false
2. The expiration of Bell's basic patents in 1893 and 1894 was the starting signal
for open competition.
a. true
b. false
3. In 1946, Congress passed a Communications Act and established the Federal
Communications Commission.
a. true
b. false
4. Each telephone subscriber is connected to several central offices (COs).
a. true
b. false
5. The local loop, or the connections between individual subscribers and central
offices, is also known as the last mile.
a. true
b. false
6. The ________________ is a particular set of standards that allows the
interworking of products from different vendors. It usually embodies a fiber-
optic ring that will permit transmission in both directions.
a. local-area network (LAN)
b. wide-area network (WAN)
c. synchronous optical network (SONET)
d. common channel signaling network

Copyright
21/26

7. Packet switching is used for which of the following?
a. credit-card verification
b. automated teller machines
c. SS7
d. the Internet and the World Wide Web
e. all of the above
8. The types of media that can transmit information in the telecommunications
world are the following ______________.
a. copper wire, coaxial cable, fiber, and wireless
b. hybrid fiber/coax and copper wire
c. wireless and copper wire
d. copper wire, coaxial cable, fiber, and hybrid fiber/coax
9. Analog signals can be ________ by combining them with a carrier
frequency.
a. carried
b. transported
c. multiplexed
d. mixed
10. ______________ is a high-performance switching and multiplexing
technology that utilizes fixed-length packets to carry different types of traffic.
a. asynchronous transfer mode (ATM)
b. asymmetric digital subscriber line (ADSL)
d. none of the above

Copyright
22/26

Correct Answers
1. Alexander Graham Bell called his first telephone a synchronous telegraph.
a. true
b. false
See Topic 1.
2. The expiration of Bell's basic patents in 1893 and 1894 was the starting signal
for open competition.
a. true
b. false
See Topic 1.
3. In 1946, Congress passed a Communications Act and established the Federal
Communications Commission.
a. true
b. false
See Topic 1.
4. Each telephone subscriber is connected to several central offices (COs).
a. true
b. false
See Topic 2.
5. The local loop, or the connections between individual subscribers and central
offices, is also known as the last mile.
a. true
b. false
See Topic 2.

Copyright
23/26

6. The ________________ is a particular set of standards that allows the
interworking of products from different vendors. It usually embodies a fiber-
optic ring that will permit transmission in both directions.
a. local-area network (LAN)
b. wide-area network (WAN)
d. common channel signaling network
See Topic 2.
7. Packet switching is used for which of the following?
a. credit-card verification
b. automated teller machines
c. SS7
d. the Internet and the World Wide Web
e. all of the above
See Topic 3.
8. The types of media that can transmit information in the telecommunications
world are the following ______________.
a. copper wire, coaxial cable, fiber, and wireless
b. hybrid fiber/coax and copper wire
c. wireless and copper wire
d. copper wire, coaxial cable, fiber, and hybrid fiber/coax
See Topic 4.
9. Analog signals can be ________ by combining them with a carrier
frequency.
a. carried
b. transported

Copyright
24/26

c. multiplexed
d. mixed
See Topic 5.
10. ______________ is a high-performance switching and multiplexing
technology that utilizes fixed-length packets to carry different types of traffic.
a. asynchronous transfer mode (ATM)
b. asymmetric digital subscriber line (ADSL)
d. none of the above
See Topic 6.
Glossary
ADSL
asymmetric digital subscriber line
AMPS
advanced mobile phone service
ATM
asynchronous transfer mode
CDMA
code division multiple access
CPE
customer premises equipment
CO
central office
FCC
Federal Communications Commission
FDM
frequency division multiplexing
FDMA
frequency division multiple access

Copyright
25/26

FTTC
fiber-to-the-curb
FTTH
fiber-to-the-home
FTTN
fiber-to-the-neighborhood
GSM
Global System for Mobile Communications
HFC
hybrid fiber/coax
IMTS
improved mobile telephone service
IXC
interexchange carrier
LAN
local-area network
LEC
local exchange carrier
LEO
low earth orbit
MFJ
modification of final judgment
MTSO
mobile telephone switching office
OC
optical carrier
PCM
pulse code modulation
PCS
personal communications service
PoP
point of presence

Copyright
26/26

PSTN
public switched telephone network
RBOC
regional Bell operating company
SONET
synchronous optical network
SS7
signaling system 7
TDM
time division multiplexing
TDMA
time division multiple access
UTP
unshielded twisted pair
WAN
wide-area network

Fundamentals of Telecommunications

Uploaded by

Copyright:

Available Formats

Fundamentals of Telecommunications

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Fundamentals of Telecommunications

Uploaded by

Copyright:

Available Formats

Fundamentals of

You might also like