The Beginners Guide To PHP Programming

- 1 -



LEGAL NOTICE


The Beginners Guide To PHP Programming




- 2 -

The Publisher has strived to be as accurate and complete as
possible in the creation of this report, notwithstanding the fact that
he does not warrant or represent at any time that the contents
within are accurate due to the rapidly changing nature of the
Internet.

The Publisher will not be responsible for any losses or damages
of any kind incurred by the reader whether directly or indirectly
arising from the use of the information found in this report.

This report is not intended for use as a source of legal, business,
accounting or financial advice. All readers are advised to seek
services of competent professionals in legal, business,
accounting, and finance field.

No guarantees of income are made. Reader assumes
responsibility for use of information contained herein.

The author reserves the right to make changes without notice.
The Publisher assumes no responsibility or liability whatsoever on
the behalf of the reader of this report.

First Kindle Original Edition, April 2008
Copyri ght 2008 by Dave MacGr egor
Published by Avonside Publishing



The Beginners Guide To PHP Programming




- 3 -

All rights reserved. This book may not be reproduced in any form, in whole or in part
(beyond that copying permitted by U.S. Copyright Law, Section 107, fair use in
teaching or research, Section 108, certain library copying, or in published media by
reviewers in limited excerpts), without written permission from the publisher.


The Beginners Guide To PHP Programming




- 4 -

Welcome to the world of programming!

First of all, I would like to congratulate you on your decision to
learn one of the easiest yet powerful programming languages
available PHP.

Web Developers use PHP to create interactive, dynamic websites
while making it easy to update and maintain, not to mention,
prompt your visitors to purchase, join a list or even tell a friend.

What is PHP And Why Should I Learn It?

PHP has been around for over 12 years, first coming onto the
scene in 1995 by a freelance software developer, Rasmus
Lerdorf. He initially used PHP by creating a script that retained a
log of all of the visitors that landed on his webpage.

His script would feature information on how many visits his site
received and other detailed information about his website stats.

As you can imagine, It didnt take long before he started to
receive emails and messages asking how he was able to do this,
and because of the overwhelming interest in his scripts, he
worked to develop PHP into what is now one of the most popular
and widely used programming languages on the Internet.

The Beginners Guide To PHP Programming




- 5 -

Throughout the years, I have seen a number of webmasters ask
the question as to why they should learn PHP. In truth, there are
so many benefits to learning how to implement the power of PHP
into your websites that a list of potential uses would take up this
ebook alone. From managing pages and updating websites
quickly, to creating commercial scripts for profit, the sky is truly
the limit.

Think of all your favorite websites, WordPress, Paypal, eBay or
perhaps FaceBook.

They all use the power of PHP to make their website run smoothly
and efficiently.

Getting Started

First of all, you will need to have access to a web server that is
set up to work with PHP. Dont let this scare you. Typically, most
of the web hosting companies today will offer PHP support, so
you shouldnt have a problem finding one. HostGator.com is an
affordable solution, as is EagerHost.com. Both of these hosting
companies fully support PHP.

Also, I want to make it clear that PHP is not a difficult language to
learn, even if you have never tried to program before. In fact, if
The Beginners Guide To PHP Programming




- 6 -

you are completely new to programming, PHP is often the easiest
way to get started.

In the world of the wide web, there are two general types of
coding languages: Server side and Client side. This means
that one type is run on the web server itself, and the other is run
in your web browser.

PHP happens to be a server side language. All of the processing
is done on the web server itself, and the result is delivered to
your web browser as HTML (which, by the way, is a Client side
language).

To begin, php code looks like this:

<?php

opens your code

Additional code here

?>

closes your code

In fact, PHP always begins with <?php and always ends with a ?>
If your code is not contained within these tags, the PHP engine on
the web server will display errors or ignore it all together.

Another important point to make is that pages that contain php
must end in .php in order to work correctly. This means if you
The Beginners Guide To PHP Programming




- 7 -

create an index page that contains php code, it must end in .php
such as index.php, not index.html. If you use .html, the webserver
will once again ignore it. (There are a few exceptions to this but
we will cover that in a later chapter).

You should also know that PHP can be embedded into HTML,
and you dont have to have raw PHP code in a PHP file, you can
always switch between HTML and PHP, all on one page, as long
as the page extension is .php (index.php, etc).

Heres an example:

<html>
<head> </head>
<body>

My First PHP Experience

<?php
//print output
echo ' My First PHP Experience;
?>

</body>
</html>


The Beginners Guide To PHP Programming




- 8 -

If you look closely at the simple script above, you will see that the
script starts off as any HTML page would, with an open HTML
tag, a head tag, and a body tag. None of this is PHP, its purely
HTML, the language used to design web pages.

The PHP script starts where you see the line like this:

<?php

You can start to create a page in HTML as shown above and
insert PHP script anywhere you like as long as you open it up with
<?php

Another important aspect of PHP is that each line must end with a
semi-colon (;). If it doesnt, your code might spit out errors.

Example: echo ' My First PHP Experience;

Note the semi-

colon at the end of the line. This is very important! Without the
semi-colon, this code would not work correctly.

As I mentioned above, in order to work with PHP you need a web
server that allows it, which most do. The reason the web server
needs to support PHP is because PHP code needs to be
executed, and the PHP interpreter handles this.

Heres an example of how this works:
The Beginners Guide To PHP Programming




- 9 -


1) You load up your favorite browser and type in
www.somesite.com

2) The website, somesite.com receives your request to load the
page.

3) The web server checks to determine what kind of document it
is that is required to load. It detects that it is a .php page
(index.php). The webserver calls on the PHP engine and
transmits the contents of the index.php page.

4) The PHP Engine loads the document and everything between
the open and close tags ( Remember: <?php and ?> )and
converts it into HTML output, so you can see it.

While this all sounds really complicated, it happens so quickly that
all you see is the website load in your browser. The power behind
it however is quite impressive.

Using the example above, if you were to load that page into your
browser, you would not see the PHP code, all you would see is
the output from the script.




The Beginners Guide To PHP Programming




- 10 -

Lets Start Coding!

Were going to tackle the basics to start with. Getting PHP to write
things to the web browser, what variables are and how to use
them...examples you can use in just about every web page you
ever create.

Lets start with the most basic one.

The PHP Echo Command Explained

Were going to tell PHP to output something to the screen. Keep
in mind that PHP can be used in conjunction with HTML as
mentioned earlier, but we will keep it simple for this example and
not use HTML at all.

EXAMPLE:

<?php echo Warrior Forum Rocks; ?>

Its a lot better than the typical Hello, World! example used in
countless php tutorial books, isnt it? =)

Lets look closer at the above command.

<?php simply tells the web server to process this as PHP code.
Its the opening line to php.
The Beginners Guide To PHP Programming




- 11 -


Echo Warrior Forum Rocks; tells the server to write and display
what is contained within the quotes and print it out on the screen.

The semi-colon means that the particular command has ended.

?> tells the webserver, Allright! Were done with PHP for now,
lets move back to regular old HTML.

Also, if you wanted to display actual quotes on your webpage, you
will need to do the following instead,

<?php echo \ Warrior Forum Rocks\; ?>

Its a bit tricky, but once you get the hand of it, I promise, it will get
a lot easier. Using the \ simply tells PHP that you want to display
a quotation mark on your page.

When I started out, I created a swipe file of code, tips and even
reminders to help me keep on track and avoid a ton of errors or
problems. I suggest you do the same as you progress through
your PHP training.

PHP Strings

A string is simply a sequence of characters (line of text) like
The Beginners Guide To PHP Programming




- 12 -

goodbye or hello contained within quotation marks. String
values can be enclosed in either double quote ( ) or single
quotes (). Strings could be considered the building blocks of
PHP considering that most all of the data is going to come from
what is contained within a string.

<?php
$double = quotation marks.;

$single = quotation mark.;

?>

When you use single quotes as the first example above indicates,
you need to escape the apostrophe with a slash, like you would
with double quotation marks, if you want it to display the quotation
marks in the actual output text.

An example would be the following code:

<?php
echo Don\t you love being a warrior?;
?>

Using the / will show the apostrophe on your page correctly.

The Beginners Guide To PHP Programming




- 13 -

There are also special commands that can be used within strings
that allow you to manipulate and change the output text (the text
that is displayed on the page). Here are a few common
commands that are used:

\n; - this will make a new line

\r; - this is used for a carriage return

\t; - this is used to represent a tab

Single Quotes ()

You use single quotes when you are displaying information that
contains no variables in the code. For example:

<?php
Echo Displaying a variable;
?>

No Quotes

If you are displaying information by using a variable only, OR you
are simply using the echo command, you are not required to use
quotes at all. Example:
The Beginners Guide To PHP Programming




- 14 -


<?php
$variable = displaying just a variable name;
echo $variable;
?>

Double Quotes ()

If you would like to display (print out) a variable that is contained
within a string or additional text/sentence, you then use double
quotes like the following example:

<?php
$variable = Jake Riley;
echo My name is $variable;
?>

The (echo My name is $variable;) would display: My name is,
and the variable - Jake Riley (My Name Is Jake Riley).

If a variable is to be displayed within words of a string, then the
entire thing must be contained within double quotes, if you want it
to display correctly.





The Beginners Guide To PHP Programming




- 15 -


PHP Variables

Variables are part of PHP programming and their purpose is to
store a value, whether it be a number (integer), a sentence or
phrase (string) or a letter (char). Every variable must have a
name, and these names in PHP are case sensitive, meaning $you
and $You would be considered different variables.

You simply assign a value to a specific variable using the
assignment operator (the equal sign = )

Using variables in your code is very simple. This is how one
looks:

$variable = 1;

A variable always begins with a dollar sign; followed by the name
you decide to call it. Variable names can include letters, numbers
and the underscore character, however you should never start
variable names with a number.

Examples:

$var can be used correctly.
$var1, $var2, etc is just fine
$1var is not correct.
The Beginners Guide To PHP Programming




- 16 -


Declaring a variable is exceptionally easy. Just remember, you
cannot have any spaces in the variable name, to avoid errors in
your code.

Another example of a variable:

<?php
$Programming = Programming Is Profitable;
?>

Whatever you assign to your variable is what will be printed out
on your page. For example, if you used $variable = 5 , your page
would just show a 5.

If you assign a sentence to a variable, the same thing happens.

Example: $variable = Hello Warrior Friend.;

The page would read Hello Warrior Friend.

You use the echo command to print out these variables onto your
webpage (Example: echo $variable; )and the output would include
whatever your variable contains.

Variables are a very important aspect of learning PHP, so you
should become familiar with them relatively quickly.

The Beginners Guide To PHP Programming




- 17 -


Useful Variables

Here is an example of how you would use a variable, if you
wanted to show the current date or time on your webpage:

<?php
$today = date("F j, Y");
echo "$today";
?>

The example above simply sets the date command as a variable
that is called $today and uses the echo command to display the
date on the screen.

Echo Multiple Variables

You can use the echo command to display more than one
variable at a time. Combining multiple variables can be very
useful and sometimes necessary to achieve specific results.

For example:

<?php
$phrase1 = Apples are healthy.;
$phrase2 = Potato Chips Are Not;
echo $phrase1 $phrase2;
The Beginners Guide To PHP Programming




- 18 -

?>

If you used this code, your webpage would show:

Apples are healthy. Potato Chips Are Not.

So, if you want to show different phrases on your page, you would
use multiple variables to print out specific sentences or phrases.

You can also echo text and variables in the same statement by
inserting periods around the variable like this:

<?php
$items = 3;
echo You have purchased .$items. Items.;
?>

This would show, You have purchased 3 items, since you have
assigned the variable $items to the number 3.







The Beginners Guide To PHP Programming




- 19 -



PHP Includes & Problem Solving

A PHP include is used when you want to include the contents of
one particular file inside of another.

<?php
include (file.inc);
?>

If you want to see a real example of how PHP Includes can save
you time and help make managing and updating your website
easier and faster, check out the following example.

Example of How PHP Includes Saves You Time

If you were developing a five page website that you plan to
continue to add new pages to.

Your navigation HTML code looks like this:

<html>
<head>
<title>My Navigation Menu</title>
</head>
The Beginners Guide To PHP Programming




- 20 -

<body>
<a href= http://www.mysite.com/index.php>Home</a>
<a href= http://www.mysite.com/products.php>Products</a>
<a href= http://www.mysite.com/articles.php>Articles</a>
<a href= http://www.mysite.com/blog.php>Blog</a>
<a href= http://www.mysite.com/contact.php>Contact Us</a>
</body>
</html>

You want this navigation menu to appear on every single page on
your website.

What happens when you want to add a new page to your site?
You would typically have to change the menu on every single
page to showcase the new link or item you wanted to add. The
manual work involved would cost you a lot of time, and each time
you went to update the links or add new ones, you would once
again, have to update every other page that this menu appears
on.

PHP Includes to the Rescue!

Simply cut and paste the navigation code into a plain text
document using your favorite text editor. (Notepad, Text Edit, etc)

<a href= http://www.mysite.com/index.php>Home</a>
<a href= http://www.mysite.com/products.php>Products</a>
The Beginners Guide To PHP Programming




- 21 -

<a href= http://www.mysite.com/articles.php>Articles</a>
<a href= http://www.mysite.com/blog.php>Blog</a>
<a href= http://www.mysite.com/contact.php>Contact Us</a>

Now, save this text file as navigation.inc (or any other name you
wish). You dont even have to use.inc as an extension for an
include page, you can use almost any type of page extension
including .php, or .html.

Now, go back to your webpage and remove the navigation code
and replace it with this PHP code:

<?php
include navigation.incl
?>

Then, save the HTML page as a .php page (index.php) and youre
done! Anytime you want to change or update the menu items, all
you have to do is edit one file the navigation.inc text file!

Can you see the power of PHP, yet?

Tip When Creating Inc Pages:
Be sure to strip out all of the formatting code from the page you
are including from (in this example, the text file. ) Make sure that it
does not contain things like <html>, <body> or anything like that.

The Beginners Guide To PHP Programming




- 22 -


Working Class Examples

We just discussed how you could save a ton of time updating your
websites using simple PHP code. This time, we are going to show
you how you can use PHP to make your job as a Webmaster
even easier.

In our example, we are going to pretend we are developing a
massive website with hundreds of content pages. We would like
to showcase advertisements on individual pages of our site,
perhaps Google Adsense. We would also like to test different
color schemes to see what works best based on our current
design. We also want to be able to change the ads periodically to
determine what converts the best.

PHP will make it exceptionally easy to accomplish all of this
quickly and effortlessly in comparison with editing every single
page each time you want to change the color, or edit an ad.

Simply open up two blank text files. The first one is going to be
our settings file, and the second one will contain our Google
Adsense code.

In the settings file, we are going to want to set variables for the
things that we are going to change from time to time, for example
The Beginners Guide To PHP Programming




- 23 -

the main Adsense publisher code and the color scheme.

We will use the following variables to achieve this:

<?php
$ad_pub_number = pub-012345678;

$eb_linkcolor = 006699;
?>

The variable, $ad_pub_number contains our AdSense publisher
tracking code, and the $eb_linkcolor contains the color code that
we want to use on this page (you can use any color code you
like). In our example, the color 006699 is a navy blue.

Now, save this page as settings.php

Its time to log into your Google account and copy the AdSense
code snippet that appears when you create a publisher campaign.






The Beginners Guide To PHP Programming




- 24 -


Our example:

<script type="text/javascript"><!--
google_ad_client = "pub-0123456789";
google_ad_width = 120;
google_ad_height = 600;
google_ad_format = "120x600_as";
google_ad_type = "text_image";
google_ad_channel = "1";
google_color_border = "FFFFFF";
google_color_bg = "FFFFFF";
google_color_link = "006699";
google_color_text = "006699";
google_color_url = "006699";
//--></script>
<script type="text/javascript"

src=" http://pagead2.googlesyndication.com/pagead/show_ads.js
">
</script>


Paste this into the blank text file.

Now, we have the code available, but in order for it to work, we
will need to make a few small changes.
The Beginners Guide To PHP Programming




- 25 -


At the beginning of the page, add in the following line of PHP:

<?php echo

and at the very end of the page, close the php with

?>

We also have to change the google_ad_client = "pub-
0123456789"; to our variable which was $ad_pub_number

We also want to change the colors of the links to include our
previous variable, $eb_linkcolor

So now your code will look like this:

<?php echo
<script type="text/javascript"><!--
google_ad_client = \"$ad_pub_number\;
google_ad_width = 120;
google_ad_height = 600;
google_ad_format = "120x600_as";
google_ad_type = "text_image";
google_ad_channel = "1";
google_color_border = "FFFFFF";
The Beginners Guide To PHP Programming




- 26 -

google_color_bg = "FFFFFF";
google_color_link = \"$eb_linkcolor\";
google_color_text = \"$eb_linkcolor\";
google_color_url = \"$eb_linkcolor\";
//--></script>
<script type="text/javascript"
src=" http://pagead2.googlesyndication.com/pagead/show_ads.js
">
</script>
?>

Save this page as ads.php

If you look closely at the changes we made you will see that we
told PHP to echo the code onto the screen and include the
variables that we set in the settings.php file such as color
scheme. We also used the quotation marks in the output with the
slash \ since we wanted to display the quotation marks on the
page. ( \$eb_linkcolor\; )

Were not finished either. We need to include a snippet of PHP on
our content pages so that it calls the settings.php and uses the
information we set up.

<?php
require settings.php;
?>
The Beginners Guide To PHP Programming




- 27 -


This tells the page that it requires the contents of the settings.php
file to be included. You have to copy and paste this code at the
very top of each content page that you want to use the
settings.php page with.

Now, to finish off this task, we need to also call the ads.php page
that we created that actually contains the ad. To do this, we
simply need to include the following code wherever we want the
ad to appear:

<?php
include ads.php;
?>

This will pull the code from the ads.php page that we created and
show these ads wherever we place this code. Be sure to use
.php as the extension of each content page (article.php,
content.php etc) to ensure that your code works correctly.

Whenever you want to change the publisher code or the colors
used, you just have to edit the settings.php file to instantly update
the entire site (or every page that includes the code telling it to
include the settings file).


The Beginners Guide To PHP Programming




- 28 -


Redirecting Using PHP

PHP is also very useful if you are looking to redirect your visitors
to other pages or websites. For example, if you are updating your
website and do not want people to see the index page, you could
use PHP to direct them to a temporary page until you have
completed the updates. You could also use PHP to redirect
visitors to an external product page using your affiliate link.

The PHP code required for a successful redirection is really short
and sweet. It looks like this:

<?php
header (Location: http://www.whatever-site.com);
?>

Whenever a visitor lands on your page they will be instantly
directed to the URL that is contained within the brackets.

By now, you have a good understanding of what PHP is and how
useful it can be to web developers. You also know how to add
basic PHP functionality to your webpages.



The Beginners Guide To PHP Programming




- 29 -


Commenting Your Code

One important aspect of PHP programming is including
comments within your code. Comments are lines of text that help
explain what certain parts of the code do, but this text is not
visible to anyone but those who have access to the source code
itself.

The reason commenting is important is to be able to quickly go
back through your code, if ever you want to update it, or share it
with other developers and be able to remember exactly what each
part of your code does. The most professional coders learn to
comment early on, as a way to stay organized and to save time
when you are required to go back into your code months from
now and make changes.

Here is an example of code that includes comments. Remember,
comments are only visible to those who have access to the
source, they will not be displayed on your website. (Ive seen
some pretty funny comments left for me by fellow coders in the
past. It can be quite entertaining! =)



The Beginners Guide To PHP Programming




- 30 -



<?php

// This is a single comment line.

# This is also a single comment line.

/* This is used for block comments, if you are working on multi-line
comments, or are leaving lengthy notes in your code.

?>

You do not have to use semi-colons after each line, since the
PHP server will ignore all of your comments in the first place.

The IF Statement

The IF Statement in PHP is very similar to using the word IF in
every day terms. For example, If you do not finish reading this
eBook you will not know everything you need to know in order to
use the power of PHP =)








The Beginners Guide To PHP Programming




- 31 -


In PHP, IF and Else are known as conditionals. Lets take a
look at how PHP compares these values for conditionals. You will
also see what is called operators in any IF statement.

== Equal to
!= Not equal to
< Less than
> Greater than
<= Less than or equal to
>= Greater than or equal to

So, a valid IF statement could consist of the following:

<?php
if ($variable == some value) {
echo Correct;}
?>

You will most likely want to use IF with ELSE. Else gives you the
option of doing something else with your PHP script in the event
IF does not calculate one way or another.

For example, you can have your website display specific text if a
condition is met (like a password is entered correctly), or
something ELSE if not (like a password entered incorrectly).

The Beginners Guide To PHP Programming




- 32 -

An example of this sort of code would look like this:

<?php
$five = 5;
if ($five == 5) {
echo Correct Password!;

} else {

echo Incorrect Password!;
}
?>

Using this, you could create a simple password protected area
using the IF and ELSE command. A PHP page with a conditional
statement could be set up to process using a HTML login form.
Then, a variable $password , could be used to detect success or
failure.


<form action="login.php" method="post">
<INPUT type="password" name="password">
<input type="submit">
</form>

This HTML form will set the variable in the action page (named
login.php in this example) with the $_POST command (more on this
later) and do one of two things: If the password is correct, it will show
the desired content. If it is NOT correct, it will redirect to another URL
(or page). Since the action is in PHP, viewing the source in the web
The Beginners Guide To PHP Programming




- 33 -

browser isnt going to reveal the password.

And your PHP Action page would include an IF/Else combination,
with perhaps a redirection command if the password was entered
incorrectly.

<?php
if($_POST['password'] == 'some_password'){

echo

<!---Put your protected HTML content here...-->
;
} else {
header ("location: some_error_page.html");
}
?>

This is a very simple way to password protect a specific page,
and while it isnt bullet proof secure, it could easily protect non-
sensitive information.

Multiple Conditions

The IF / Else statement is very useful if you need to check for only
one specific condition, however a third party comes into play
when you are required to use multiple conditions.

Example: If you need to check to see if a truck is either a Dodge,
Ford or Chevy, you would need to use what is called an Elself
statement.
The Beginners Guide To PHP Programming




- 34 -



<php

$truck = "Chevy";
if($truck == "Dodge"){
echo "Its Ram Tough!";
} elseif {$truck == Ford}
echo Built Ford Tough!;
} else {
echo "Well Be There!";
}

?>

Elself cannot be used without the condition IF however, so
what happens if you have multiple instances of Elselfs?

Often times, we have to evaluate multiple conditions, in this
example we have to list many different truck models, and in these
instances using Elself can be a tad cumbersome (writing out a
dozen Elself conditions is quite tedious). In this case, we can
use a short-cut known as a Switch Command.






The Beginners Guide To PHP Programming




- 35 -




Lets add a handful of other truck models to our inventory using a
Switch so we can show you how it works:

<?php
$truck = "Chevy";
echo "Drive a $truck, <br/>";
switch ($truck){
case "Dodge":
echo "Ram Tough!";
break;
case "Ford":
echo "Built Ford Tough!";
break;
case "Toyota":
echo "Got The Guts?";
break;
case "Nissan":
echo "Shift_power";
break;
case "GMC":
echo "Professional Grade";
break;
} ?>


Using the Switch Command makes the code shorter and a lot
The Beginners Guide To PHP Programming




- 36 -

cleaner, and minimizes the number of If/Else statements used.
However, when you do use the Switch command, be sure to
include the break statement, as it terminates loops and ends the
process. Failure to use a break will result in the information
continually being processed.

In order for a switch to work correctly, you need to also add a
default to the code in the event that no match can be found.


<?php
$truck = "Chevy";
echo "Drive a $truck, <br/>";
switch ($truck){
case "Dodge":
echo "Ram Tough!";
break;
case "Ford":
echo "Built Ford Tough!";
break;
case "Toyota":
echo "Got The Guts?";
break;
case "Nissan":
echo "Shift_power";
break;
case "GMC":
echo "Professional Grade";
break;
The Beginners Guide To PHP Programming




- 37 -

default:
echo "Well Be There!";
break;
} ?>

So, if there are no matches, our default will be used in its place.

PHP Arrays

An array can be thought of as a single variable that stores more
than a single value. An array uses a key to determine what
value to reference.

<?php

echo $array[0];

?>

An array is accessed by the name of the array, followed by
square brackets containing the key of the array item we want to
access.

$array[key]

The Beginners Guide To PHP Programming




- 38 -

An array contains an array of values, each of which are
referenced by this key.

We use the keys to access each individual item within the array.

We would assign an array like this:

<?php

$array = array(
'first value',
'second value',
'third value',
'fourth value' );

?>

All that information would be stuck into the $array array. We could
then access each item:

<?php

echo $array[0]; // prints "first value"
echo $array[1]; // prints "second value"
echo $array[2]; // prints "third value"
echo $array[3]; // prints "fourth value"
The Beginners Guide To PHP Programming




- 39 -


?>

The key index consists of numbers, the first value in the array is
accessed with 0, NOT 1. The second accessed by 1, the third by
2, and so forth.

$array[key] = value;

Key values typically start at 0, as PHP likes to number things
starting at Zero, instead of 1.

Using our truck example from earlier, lets assign them using an
array.

<?php
$truck_array[0] = "Toyota";
$truck_array[1] = "Dodge";
$truck_array[2] = "Chevy";
$truck_array[3] = "Ford";
?>

And here is how we would output the information from this array:

<?php
echo "Two great truck dealers are "
. $truck_array[0] . " and " . $truck_array[1];
echo "<br />Two more great truck makers are "
. $truck_array[2] . " and" . $truck_array[3];
?>
The Beginners Guide To PHP Programming




- 40 -



Finally, here is the output result from the above array:

Two great truck dealers are Toyota and Dodge.
Two more great truck dealers are Chevy and Ford.

Associative Arrays

An associative array is an array in which the keys are associated
with values.

<?php
$truck[Toyota] = Tundra;
$truck[Nissan] = Titan;
$truck[Dodge] = Ram;
?>

A syntax example using the Associative Array above would look
like this:

echo "Toyota makes the " . $truck[Toyota] . "<br />";
echo "Nissan makes the " . $truck[Nissan] . "<br />";
echo "Dodge makes the " . $truck[Dodge];

When viewed in a browser, it would look like this:

Toyota makes the Tundra
Nissan makes the Titan
Dodge makes the Ram
The Beginners Guide To PHP Programming




- 41 -


You dont have to access array items with number values starting
at 0, you can simply define your own keys.

You may not see the usefulness of the Array and Associative
Array right now, however you will discover just how handy they
are in upcoming lessons.

Associative arrays allow you to associate different words with
each array item, it is easier to remember which word accesses
what item in large array, your mind remembers words easier than
having to count, starting from zero, in your head.

Remember the single quotes/double quotes thing? This applies
when accessing array items with keys also. An integer value or a
variable needs not be quoted, a string value needs single quotes,
a string value containing a variable needs double quotes.

Special Arrays

$_SERVER

This array contains lots of values for you to use in your scripts. It
contains the clients IP address, the browser version, the URI of
the script being access, various HTTP headers and much more,
here are some examples.
The Beginners Guide To PHP Programming




- 42 -


$_SERVER['REMOTE_ADDR']; // client's IP
$_SERVER['HTTP_USER_AGENT']; // client's user-agent string
$_SERVER['REQUEST_URI']; // requested URI
$_SERVER['HTTP_X_FORWARDED_FOR']; // HTTP-x-
forwarded-for header

$_POST

This array contains anything that has been submitted through the
POST method. We will be looking at this in the next chapter.

$_GET

This array contains anything that has been submitted through the
GET method. We will be looking at this in the next chapter.

$_COOKIE

Contains cookie information for the client. Say you set a cookie on
their machine named mycookie with a value of Jester.

$_COOKIE['mycookie'] would contain 'Jester'.

$_REQUEST

The Beginners Guide To PHP Programming




- 43 -

This associative array consists of everything in $_POST, $_GET,
$_COOKIE and $_FILE.

PHP Loops

Using loops in conjunction with arrays is a great way to improve
your PHP scripts, and eases the workload of repetitive tasks.

The first type of Loop we will discuss is a While Loop. This is
one of the most useful loop functions in PHP, and looks like this:

<?php

while(this_condition_is_true) {
// perform this task
}

?>

The structure of a while loop looks very similar to an if statement.
PHP checks to see if what is inside of the parenthesis evaluates
to be true.

If so, everything that is nested inside of the curly braces is
performed. PHP continues to perform those tasks until the
condition in the parenthesis evaluates to false.
The Beginners Guide To PHP Programming




- 44 -


<?php

// Let's count to 10!

$i = 1;
while($i <= 10) {
echo "$i<br />\n";
$i++;
}

?>

What is happening here is very simple. First off, we declare a
variable, $i, that holds the value of 1. This variable is what we'll
use for the conditional of our while loop as well as to echo out our
numbers from 1 to 10.

We then tell PHP that we want it to perform a loop. Our loop will
continue so long as the value of $i is less than or equal to 10 ($i
<= 10). Each time PHP iterates through the loop we tell it to echo
out our variable and then increment it by one.

Real World Usage for WHILE Loops

The Internet Marketing Company wants to show a pricing matrix
on their website for their current product packages. Since their
The Beginners Guide To PHP Programming




- 45 -

products are so popular, the price fluctuates constantly to reflect
the current demand for their services.

Using a While Loops along with a bit of HTML can make the
process of changing the pricing structure, really easy. In fact,
youll only have to change one value every time the pricing
changes!

<?php
$product_price = 2.15; //This is the price of one eBook
$counter = 1;

echo "<table border=\"1\" align=\"center\">"; //note the escapes for
quotes!
echo "<tr><th>Quantity</th>";
echo "<th>Price</th></tr>";
while ( $counter <= 20 ) { //we just set the counter limit at 20
echo "<tr><td>";
echo $counter;
echo "</td><td>";
echo $product_price * $counter; //here we multiply
echo "</td></tr>";
$counter = $counter + 1; //here we add 1 to the counter and
start again
}
echo "</table>";
?>

The Beginners Guide To PHP Programming




- 46 -

Our actual Loop code is highlighted in blue. You will see that
weve set the variables $product_price and $counter. The
$counter variable allows us to create a math function to increment
the unit price by 1 every time we see a loop (see the $counter =
$counter +1 part of the code). So, while the $counter equals less
than or equal to 20, this loop will function and remain as is.

Once we hit 21, thats it the loop stops!

Note on PHP Math Functions:

+ addition (You can use ++ to increment a value
by 1)
- subtraction
* multiplication
/ division

Here is what it looks like in a browser. You can
quickly see just how much money 20 eBooks
would cost you at the current price.








The Beginners Guide To PHP Programming




- 47 -


The FOR Loop

The For Loop is very similar to a WHILE Loops, the only different
being a little more code is contained within the loop. The FOR
Loop can be a little more compact than a While Loop.

Heres the logic;

for ( create a counter; conditional statement; increment the counter){
do this;
}

Lets use our fluctuating ebook cost from our
earlier example and write this out. The products
just went up by $.10!

<?php
$product_price = 2.25;

echo "<table border=\"1\" align=\"center\">";
echo "<tr><th>Quantity</th>";
echo "<th>Price</th></tr>";
for ( $counter = 1; $counter <= 20; $counter += 1) {
echo "<tr><td>";
echo $counter;
echo "</td><td>";
echo $product_price * $counter;
echo "</td></tr>";
}
echo "</table>";
?>
The Beginners Guide To PHP Programming




- 48 -


Once again, the loop is highlighted in blue above. You will notice
that the counter is defined inside of the loop, as opposed to a
variable located outside.

There is one more loop we are going to cover, and its called the
For Each Loop.

For Each Loop

If you wanted to loop through an associative Array, you would use
the For Each to complete this task. Where the WHILE and FOR
loops run until an error is encountered, the FOR EACH loop will
run through every single element in the array.

Lets go back to the associative array that
we set up for the truck inventory earlier:


<?php
$truck[Toyota] = Tundra;
$truck[Nissan] = Titan;
$truck[Dodge] = Ram;
?>

To loop through the models, we would use this PHP code:

<?php
foreach( $truck as $make => $model){
echo "Make: $make, Model: $model <br />";
}
?>
The Beginners Guide To PHP Programming




- 49 -


Functions

A function in PHP is really quite easy to understand. Its a piece of
code that can be named and re-used at any time. Functions can
help us reduce our coding time significantly, by simply writing the
code once and then defining it as a function that can be called on
at any time to appear.

This is how it works:

<?php
Function MyFunctionName () {
// define your function here
}
?>

Lets pretend that you want every page on your website to feature
your company name. You would create a function to do this, and
call it MyCompanyName.

<?php
function MyCompanyName(){
}
?>

Now, lets add a bit of code in between the curly brackets, that we
The Beginners Guide To PHP Programming




- 50 -

plan to execute.

<?php
function MyCompanyName(){
echo "Welcome to The Creamy Bagel Company! ";
}
?>

Whenever you want your company name to appear on a page,
you simply call the function within a PHP tag and its done!

<?php
function myCompanyName(){
echo "Welcome to The Super Smooth Programming Corp!<br
/>";
}
echo Isnt it about time you experienced a better coding
company?<br />;
myCompanyName();

?>

A function can contain just bout any type of PHP code imaginable,
so you should quickly see just how useful this can be, as well as
how much time you can save when you begin coding.


The Beginners Guide To PHP Programming




- 51 -

PHP Sessions

When you dive deeper into PHP, and come to the point where
you are interested in displaying specific user/visitor data
throughout different areas and pages on your website, its time to
learn PHP sessions!

(Think Shopping Carts, etc)

A session is simply, a way to store information (in the form of
variables) that will be used throughout multiple pages. Unlike a
cookie that can be placed or stored on your computer, PHP
sessions do not store information this way.

It is also different than other variables you might use, in the sense
that you are not passing them individually to each separate page,
but instead simply retrieving them from the initial session that is
opened at the start of each page.

Heres an example of a session:

<?php
// this starts the session
session_start();

// this sets variables in the session
$_SESSION['color']='blue';
The Beginners Guide To PHP Programming




- 52 -

$_SESSION['size']='large;
$_SESSION['shape']='round';
print "Done";
?>

The first thing we need to do is to open a session using the
command: session_start();

After you open up a session, you can then set variables, for
instance, colors, sizes, etc. In our example, we have set it as
color blue, size large and shape round, in that order.

One thing you should know is that in order for this code to work,
you must place the session_start() code in the header of your
page, and you can not send anything to the browser before that
code, therefore its best to just place it directly after the <?php to
avoid any problems or errors.

Most sessions store a cookie on your computer to use as a key.

The web server will automatically add a lengthy, random session
ID that represents a unique session. It may look similar to this:

a8486d5484a654255csa55ca54ddg5d5g478

When a session is opened on another page, it quickly scans your
computer for a key. If one is found and it matches, it allows
The Beginners Guide To PHP Programming




- 53 -

access to that session. If no key is found, it will start a new
session for you.

Sessions are used to store data, and to do this we can use an
associative array, based on the $_SESSION variable.

For example, look at the following code used for login form
sessions:

<?php
session_start(); // Starts a PHP session
echo "<form method=POST action=index.php>
User Name: <input type=text name=\"username\">
Password: <input type=text name=\"password\">
<input type=submit>
</form>"; // This is the HTML form
$_SESSION['username']=$_POST["username"]; // Enters the
username into the array
$_SESSION['password']=$_POST["password"]; // Enters the
password into the array
?>

Using this code, your username and password are now stored in
an array that will last until the season has ended or un-set. An
ended session occurs when either a viewer closes their browser
or you tell PHP to run a command and end or terminate the
session.

The Beginners Guide To PHP Programming




- 54 -

You can change this in the php.ini file on your server by changing
the 0 in session.cookie_lifetime = 0 to the number of seconds that
you would like the session to last for, or by using
session_set_cookie_params().

<?php
session destroy();
?>

Or, we can edit or remove individual session variables, as well as
the entire session. To change a session variable, we just reset it
to something different.

<?php
// you have to open the session to be able to modify or remove it
session_start();

// to change a variable, just overwrite it
$_SESSION['size']='large';

//you can remove a single variable in the session
unset($_SESSION['shape']);

// or this would remove all the variables in the session, but not the
session itself
session_unset();

// this would destroy the session variables
The Beginners Guide To PHP Programming




- 55 -

session_destroy();
?>

This will abruptly end the session and clear out any associated
data that was stored from the current session.

You can use the unset() variableto remove a single variable or
session_unset() to remove all variables for a specific session.

Of course, you can also use session_destroy() to destroy the
session entirely.

If you want to remove specific data from a session without
deleting the entire thing, you can call on the IF statement and
combine it with two commands, the first is called the ISSET
command and the second, the Unset command.

Here is how it might look:

<?php
if(isset($_SESSION['items'])){
unset($_SESSION['items']);}
?>

Looking at this code, if the specific key is set in this session, it will
remove the keys data.



The Beginners Guide To PHP Programming




- 56 -

Cookies

You have probably heard about cookies, in fact, you most likely
have dozens stored on your computer from visits to different
websites that you visit regularly or log into. As mentioned earlier,
cookies store information on your computer from these visits.
This allows websites to remember you when you return, and can
make things easier for you by remembering your login details, etc.

You can use PHP to create and set cookies easily.

<?php
setcookie(name, value, expiration);
?>

There are however, three required factors when setting a cookie
on a users computer.

1) Name : This is where you simply set the name of your cookie
so you can retrieve it at a later date. You can call the cookie
anything you want.

2) Value: The value that you wish to store inside of the cookie.
Some common values are usernames, or perhaps the date of
your last visit.

3) Expiration: You set the expiration date for your cookie in
regards to when it is to be deleted from the users computer. If
you do not set an expiration date on your cookie, the cookie will
The Beginners Guide To PHP Programming




- 57 -

be deleted when the visitor closers their browser, so if you want it
be retained, you need to ensure you set a specific expiration
period.

Obtaining information from a cookie is as easy as initially setting
on. If you recall the ISSET command from earlier, PHP extracts
cookie data in a very similar way, by creating an associative array
to store the cookie data using the $_Cookie variable. The array
key is what you called the variable when it was set. This means
you can set as many cookies as you wish, with no limits.

Cookies are stored in small text files on your vistors computer, so
they dont take up much room at all.

Here is an example of code that sets a cookie:

<?php
if(isset($_COOKIE['username'])){ // If theres a cookie...
$username = $_COOKIE['username']; // set the variable...
echo "Welcome back, $username."; // and show the data in the
cookie...
} else {
echo "No username was found. Sorry!";} // or show this if there
wasnt one.
?>

Processing Forms

If you own a website, odds are that you will find it very handy to
The Beginners Guide To PHP Programming




- 58 -

learn how to use PHP to process forms, such as Contact Forms,
or even question based survey forms. To do this, we use the
PHP mail() command.

Simply create a HTML form that includes the following fields:

Name, Email and Message

Here is an example of a simple HTML form that can be used to
collect data:

<html>
<head><title>Test Page</title></head>
<body>
<h2>Data Collection</h2><p>
<form action="process.php" method="post">
<table>
<tr><td>Name:</td><td><input type="text" name="Name"
/></td></tr>
<tr><td>Age:</td><td><input type="text" name="Age"
/></td></tr>
<tr><td colspan="2" align="center"><input type="submit"
/></td></tr>
</table>
</form>
</body>
</html>

This page contacts <form action=process.php method=post>
which means that the page will send the Name and Age data to
the page, process.php.
The Beginners Guide To PHP Programming




- 59 -


Now, we have to create the process.php page that will use the
data from the HTML form:

<?php
print "Your name is ". $Name;
print "<br />";
print "You are ". $Age . " years old";
print "<br />";
$old = 25 + $Age;
print "In 25 years you will be " . $old . " years old";
?>

If you leave out the method=post section of the form, the URL
will show the data. For example, if your first name is Henry
Adams and you are 47 years old, our process.php page will
display as:

http://your-
website.com/process.php?Name=Henry+Adams&Age=47

If you want, you can manually change the URL and the output will
change accordingly. Also note, that everything after the ? is
called the Query String.

You can also retrieve information through he form using the Get
and Post methods). Here is how its done:
The Beginners Guide To PHP Programming




- 60 -


<form action="script.php" method="post">
First name: <input type="text" name="firstname"><br>
Last name: <input type="text" name="lastname"><br>
<input type="submit" value="Submit">
</form>

The HTML code would create a form on your website and would
showcase two input boxes. One called firstname and one called
lastname. If you look in the code above, you will see that the
form is being told to submit the form to script.php

<form action = script.php method = post>

Now, lets assume that our visitor entered in Marty as their first
name and Reno as their last name.

<?php

// how we get form info with a POST form
// $_POST['firstname'] contains what they entered in "firstname"
input
// $_POST['lastname'] contains what they entered in "lastname"
input

echo '<p>Hello '.$_POST['firstname'].'
'.$_POST['lastname'].'</p>';
The Beginners Guide To PHP Programming




- 61 -


// would output:
// <p>Hello Marty Reno</p>

?>

If you use the POST form method, then all the input values will be
contained within an associative array, POST. If you submit an
input that is called name, it will be available in $_POST['name'].

If you submitted the form using the GET method, it would change.

<form action="script.php" method="get">
First name: <input type="text" name="firstname"><br>
Last name: <input type="text" name="lastname"><br>
<input type="submit" value="Submit">
</form>

Notice how the only change in the form above is that we changed
the method to GET

<form action="script.php" method="get">

Then the form:

<?php

The Beginners Guide To PHP Programming




- 62 -

// how we get form info with a GET form
// $_GET['firstname'] contains what they entered in "firstname"
input
// $_GET['lastname'] contains what they entered in "lastname"
input

echo '<p>Hello '.$_GET['firstname'].' '.$_GET['lastname'].'</p>';

// would output:
// <p>Hello Marty Reno</p>
?>

If we submit a form through the GET method then we simply use
the $_GET array rather than the $_POST array.


Introduction to MySQL

MySQL and PHP often work closely together especially for web
applications and developments. MySQL is often used in
conjunction with PHP for the same reason that made PHP so
popular. It is free, widely available and the majority of web hosts
support it. There are, however other database systems that PHP
works with, but MySQL is by far, the most common and well
known option.

In this chapter, we will learn how to use MySQL to connect to a
MySQL database and perform basic functions.
The Beginners Guide To PHP Programming




- 63 -


Dont worry, MySQLs commands are written out in a very easy,
and comprehensive format, similar to just regular English.

Making The Connection

To begin, you will need to be able to command PHP to connect to
a database before you can actually access and use it. The
command is relatively straight forward, using mysql_connect().

<?php
$dbhost = "localhost"; // the dbs server
$dbname = "mysite_dbname"; // the dbs name
$dbuser = "mysite_dbuser"; // the dbs username
$dbpass = "password"; // the password for the user
mysql_connect ($dbhost, $dbuser, $dbpass) or die (mysql_error()); //connect to db
or show error if failure
echo "Connected to database";
?>

Analyzing the code above, the majority of the code should be
pretty easy to understand. The dbname means Database Name
(whatever you called the database when you created it inside of
your hosting account, on your server). The dbuser, is the
username you assigned to it, and so on.

One thing you may not understand however, is the or die
The Beginners Guide To PHP Programming




- 64 -

commany, which simply helps direct PHP with how to handle any
problems or errors it encounters, such as not being able to
connect to the database because you entered incorrect
information (like a wrong username or database name, etc). The
or die(mysql_error()) tells PHP to display the error, if there is
one, so we can determine what caused the connection failure to
occur.

If you do experience a connection problem, odds are it was
caused by a simple mistake when entering in the database
details. Its easy to make a mistake, so before you panic when
seeing this error, just open up the page that contains the MySQL
details and verify they are correct.

If all goes well, you will be connected to your database. So
whats next? Inserting data into the database, and using it
effectively.

Heres how we could do it;

To begin, you need to select the database using the
mysql_select_db() command like this:

<?php
mysql_select_db(my_db) or die (mysql_error());
?>

The Beginners Guide To PHP Programming




- 65 -

Replacing my_db with the database name.

Next, we can create tables within the database, which will
categorize and store information and data. Before that happens
however, you will need to determine exactly what kind of
information you want to store.

Here is a simple example of a table creation command using the
mysql_query:

<?php mysql_query(
CREATE TABLE Employees
(employee_id INT,
first_name VARCHAR(50),
last_name VARCHAR(50))
?>

You will need to define the type of data that is going to be placed
inside of each table field, so you should know exactly what data
you want to be stored before you begin to create database tables.

Here are a few common types of data fields:

CHAR() Fixed length field between 0 and 255 characters in
length that can store any type of data you desire. The length of
the field is set regardless of the size of the actual data that is
The Beginners Guide To PHP Programming




- 66 -

placed inside of it.

DATE This would store the date (YYYY MM DD) format.

INT Whole numbers only. The number of digits can also be
specific in parentheses but is not required.

TEXT - Variable length text only field with a maximum length of
65535 characters.

VARCHAR() This variables length field must be between 0 and
255 characters and can store any type of data. Unlike the CHAR()
type of field data, the length of each VARCHAR() field is
determined by the data that is actually placed into it.

The Primary Key

Spreedshot programs such as Microsoft Excel utilize row
numbers to identify what row specific data should be stored in.

Databases have a similar identifier called the Primary Key.

You can draw out your database with relative ease, or you can
create a mock-up of it in a spreadsheet.

For example:
The Beginners Guide To PHP Programming




- 67 -


When you create the tables there are going to be additional
details that you are going to have to include, in order to remember
what the primary key is when you make a new row of data, etc.

This extra information includes Auto_Increment and NULL or /
NOT NULL.

Here is an example:

<?php
// Make a MySQL Connection
mysql_connect("localhost", "user", "password") or die(mysql_error());
mysql_select_db("test_db") or die(mysql_error());

// Create a MySQL table in the selected database
mysql_query("CREATE TABLE Employees(
id INT NOT NULL AUTO_INCREMENT,
PRIMARY KEY(id),
employee_id INT,
first_name VARCHAR(50),
last_name VARCHAR(50)")
or die(mysql_error());

echo "Table Created!";

?>

Lets take a closer look at this code:

First of all, we made a connection to the MySQL database and
selected the database that we wanted to access and work with.

The Beginners Guide To PHP Programming




- 68 -

Then, we made a table called Employees, and included a
column called ID that will automatically increment by 1 each time
a new record is created. This has a NOT NULL value (which
simply means that the ID value is real and searchable), and that
the Primary Key is set to be the ID field. Next, we created three
data fields (employee_id, first_name, and last_name), and
included the or die command that will help us determine when/if
something goes wrong.

IF NOT EXITS

People have asked if creating a table that is already being used
can break a script, and the answer is absolutely.

This is why we want to use the IF NOT EXISTS command with
the CREATE command. This will prevent the table from being
created if an identical one already exists. If this is a brand new
database that you just created however, you will not have to be
concerned with existing tables.

It is a good idea to get into the habit of using the IF Not Exists
command early on though, for when you are adding tables to an
existing database structure.



The Beginners Guide To PHP Programming




- 69 -




<?php mysql_query(
CREATE TABLE IF NOT EXISTS Employees
(employee_id INT,
first_name VARCHAR(50),
last_name VARCHAR(50))
?>


The If Not Exists command can be used for other things in
MySQL as well, such as creating databases. You can use it and
its partner If Exists in data selects and other queries as well.








The Beginners Guide To PHP Programming




- 70 -


Inserting Data

Using the Employees example above, heres the syntax for
inserting data into an existing table. You can save time by using
a PHP function or an include to set up the MySQL_connect
statement, since it has to exist whenever you connect to a
database.

<?PHP
mysql_connect (My_DB, user, pass) or die (mysql_error());
mysql_query("INSERT INTO Employees
(employee_id, first_name, last_name) VALUES(103, 'Michael', 'Bolton' ) ")
or die(mysql_error());
?>

Calling Data with Select, From

Placing data into a table is important, however there are times
you are going to want to extract data from a database. Here is
where the Select and From command come into play.

Select selects data from a table

If you wanted to select all of the data from an existing table, you
would use a * symbol which equates to all/everything.

The Beginners Guide To PHP Programming




- 71 -

(Example: Select*From Table)

If you wish to select specific data from the table, by the rows
Primary Key, you would use this:

(Example: Select 3 From Table)

You can also use Where to dig into the data and extract what
you are looking for by using:

Select*From Table Where Last_Name= Petersisonian

Lets take a look at the Employee database table once again:

<?PHP
mysql_connect (My_DB, user, pass) or die
(mysql_error());
mysql_query(SELECT * FROM Employees WHERE
last_name=lumbergh) or die(mysql_error());
?>

Now, what if you couldnt remember how to spell Petersisonian (it
is a rather unusual last name, after all). You could locate all last
names that begin with the letter P, to narrow down your search.
Just use the % as a wildcard, like this:

mysql_query(SELECT * FROM Employees WHERE
last_name=P%) or die(mysql_error());

The Beginners Guide To PHP Programming




- 72 -

Using this command, the search query will return all data in the
last_name field that begins with the letter P.

Updating Data

If data needs to be modified, you can update it using the Update
and Set commands. For instance, lets pretend that Mr
Petersisonian changed his last name to Peters. We would simply
update the field like this:


<?php
Well skip the connection, you should have it as a
function already!
mysql_query(UPDATE Employees SET
last_name='Peters' WHERE employee_id='104')
?>










The Beginners Guide To PHP Programming




- 73 -

Deleting / Removing Data

Just as we may wish to add data, there are times when removing
data is required.

Here is how we could do this:

<?php
Once again...you should be able to connect by now!
mysql_query(DELETE FROM Employees WHERE
employee_id='104')
?>


You are identifying the person you wish to delete by using the
employee_id which would be specific and unique to each user.

Final Thoughts

Learning PHP can be an enjoyable and rewarding experience if
you take it one step at a time and try to avoid becoming
overwhelmed with the many ways that PHP can be used to power
and manage websites and applications.

Spend some time exploring the PHP tutorial websites, try your
hand at simple code before moving into the more advanced
methods, and you will quickly discover just how simple it really is.
The Beginners Guide To PHP Programming




- 74 -


Listed below are a few useful resources that will help you
continue along your way to mastering PHP.

PHP Main Page:
http://www.PHP.net

MySQL Main Page:
http://www.MySQL.com

PHP Builder Community:
http://www.PHPbuilder.com

PHP Resource:
http://www.php.resourceindex.com

PHP Tutorials:
http://www.GoodPHPTutorials.com

Video PHP Tutorials:
http://www.KillerPHP.com

For Resale Rights And PLR Ebooks & Software
The Best Resource BAR None is:
http://www.publisherproducts.com
The Beginners Guide To PHP Programming




- 75 -