1

Douglas Cates, student,

Department of Fisheries
and Wildlife; and
Nancy Allen, Extension
wildlife instructor;
Oregon State University
EC 1556
Reprinted June 2003
$1.50
Build Nest Boxes
for Wild Birds
D. Cates and N. Allen
The
Wildlife
Garden
Oregon has 45 species of birds that nest in holes (cavities) in
rotting or dead trees (snags). But, though they are very valuable for
wildlife, many snags in urban areas are cut down
and removed for aesthetic reasons or because they
are considered a hazard. If you have some dead
trees in your yard, you can make
them safer by cutting off their
tops and cutting back the
branches.
If you have no snags in your
yard, you can help replace the loss
of natural cavities by adding nest
boxes. Nest boxes are a great way
to attract wild birds to your yard.
They provide birds shelter and a
place to raise their young. Some
birds that use nest boxes are
chickadees, wrens, bluebirds,
swallows, wood ducks, and owls.
There are many kinds of decorative
birdhouses for sale. But, they might not be right for
use. Before you buy a birdhouse, be sure it has the
correct dimensions and other features important for
birds welfare and safety.
Or, you can build your own nest boxes. Building your own nest
box can be fun and rewarding for you and for children.
Materials
The best hardware for nest boxes is brass or galvanized wood screws
or #7 galvanized nails. Screws are recommended, because they make it
easier to fix mistakes and replace damaged parts.
All illustrations from
Landscaping for Wildlife
in the Pacific Northwest,
University of Washington
Press and Washington
Department of Wildlife.
2
Do not use treated, stained, or painted
lumber. Toxic fumes may harm the birds, and
paint fills the pores and reduces the insulating
capacity of the wood. Exterior plywood that is
5
8 inch thick works well. Or, you can use
1-inch-thick pieces of cedar or redwood.
Cedar and redwood have natural preservatives.
For all types of wood, use straight boards
with few knots and split ends. If you want a
more natural-looking box, you can attach
pieces of bark and moss to the outside.
Checklist of tools you need to build a
nest box.
Electric or cordless drill
Awl
Tape measure
Saw
Wood rasp or sandpaper
Screwdriver and/or hammer
Galvanized or brass screws or galvanized nails
Carpenters square
entrance hole circumference and filing them
down with a wood rasp or file. Be sure the
dimensions are correct and the entrance hole
is smooth.
Pre-drill screw holes with a drill bit
slightly smaller than the screw or nail. This
prevents the wood from splitting. Drill all
holes before you assemble the box. Roughen
the inside surfaces of the box pieces with a
wood rasp or sandpaper before you put them
together.
Cut
1
8-inch grooves on the inside of the
front panel with an awl or hammer claw.
These grooves enable young birds to climb out
of the box when they are ready to leave the
nest (to fledge). Drill several
1
4-inch holes in
the bottom of the box to allow water to drain,
and at least two
1
4-holes in the sides of the box
near the top for ventilation.
Use two pivot screws or nails to pin the
top of one of the sides. This allows it to hinge
open so you can clean the box inside (see
Maintenance, page 6). Be sure the pivot
screw on the opposite side is at the same level
as the one in front, so the side will open easily.
Use two screws and a wire to keep the side
closed firmly, as shown in Figure 3 (page 5).
Follow the assembly order shown in
Figure 2 for putting the box together. Figure 3
shows more design ideas.
Finishing touches
You can line the bottom of your finished
box with an inch of nesting material such as
wood shavings or wood chips. Some birds will
use the material itself for nesting, and others
will build their nest on top of it. Do not use
sawdust, because it soaks up water and gets
matted down.
Construction
Nest boxes can be very simple in design.
The most important features are the size of
the box and the entrance hole.
Check that the dimensions of the box are
right for the bird species you wish to shelter
(see Table 1, page 4). Cut the wood into
pieces with the correct dimensions. Figure 1
shows the dimensions and specifications for a
basic songbird nest box.
The easiest way to make the entrance
hole is to use a hole saw of the correct size
attached to a power drill. You also can make
an entrance hole with a jigsaw after drilling a
start hole, or by drilling many holes within the
3
Roof
Floor
Side
Side
Front
Back
Extra
4"
5
1
2"
8
1
2"
12"
10"
10"
17"
1
4"
Detail of two slant cuts
1
1
8"
3
8"
12"
Figure 2. Assembly sequence.
Materials:
11 x 6 x 6-ft rough cedar, redwood, or plywood board
181
1
4-inch outdoor wood screws or #7 galvanized nails
Wire to keep side door shut
Specifications:
1. For most songbirds, the hole must be exactly 1
1
2 inches
in diameter and 1
1
8 inches from top.
See Table 1 for dimensions for specific birds.
2. Drill holes in the floor to allow for drainage, and attach
this piece to the sides
1
4 inch up from the bottom
(optional). Or, cut corners
3
8 inch (see diagram).
3. Drill holes for ventilation near top.
Figure 1. A basic songbird nest box.
4
Table 1. Nest box dimensions (in inches) and placement recommendations for
common bird species of the Pacific Northwest.
Distance of
Side Entrance entrance
Species Bottom Top height diameter from floor Placement
American kestrel 8 x 8 12 x 8 1215 3 912 1030 ft high in open area or
edge of a forest
Barn owl 18 x 18 22 x 18 1518 6 46 1218 ft high in open area
Black-capped 4 x 5
1
2 8 x 5
1
2 8 11
1
8 7 615 ft high at edge of a
chickadee forest
Chestnut-backed 4 x 5
1
2 8 x 5
1
2 8 11
1
8 7 615 ft high at edge of a
chickadee forest
Downy woodpecker 6 x 6 10 x 6 9 1
1
4 7 525 ft high on dead tree at
edge of a forest
Hairy woodpecker 6 x 6 10 x 6 1215 1
5
8 912 525 ft high on dead tree at
edge of a forest
House wren 4 x 4 8 x 4 68 1 46 610 ft high near dense
underbrush
Northern flicker 10 x 10 14 x 10 1618 2
1
2 1416 525 ft high on dead tree at
edge of a forest
Northern saw- 8 x 8 12 x 8 1215 3 912 520 ft high in forest near
whet owl lake, stream, or wetland
Purple martin 6 x 6 10 x 6 68 2
1
4 46 1020 ft high in riparian zone
Red-breasted 4 x 4 8 x 4 8 1
1
4 7 515 ft high in open area or
nuthatch at edge of a forest
Tree swallow 5 x 5 9 x 5 68 1
1
4 46 615 ft high in relatively open
area near lake, stream, or
wetland
Violet-green swallow 5 x 5 9 x 5 68 1
1
4 46 615 ft high at edge of a
forest
Western bluebird 5 x 5 9 x 5 812 1
1
2 610 410 ft high near open area
Western screech owl 8 x 8 12 x 8 1215 3 912 1030 ft high in forested area
White-breasted 4 x 4 8 x 4 8 1
1
4 7 515 ft high in open area or
nuthatch at edge of a forest
Wood duck 12 x 12 16 x 12 2226 3 high, 18 1020 ft high next to a body
4 wide of water
5
Where to place the box
Place the nest box where it is easy to
mount, clean, and inspect. Put it on a sturdy
support at least 6 feet off the ground, in a spot
that allows birds safe and easy access (see
Table 1).
Put the box in a spot that gets morning
sun but is protected from afternoon heat. Be
sure the place is sheltered from heavy winds so
rain wont be blown into the entrance hole.
It might take a while for birds to use
your nest box. Dont be discouraged! If birds
havent used your box after the first year, try
moving it to a different spot. Try putting up
several boxes. This gives birds more choices,
and youll find out which spots they prefer.
When to put up the box
The best time to put up your box is in
February or March for birds that begin nesting
in early spring. Observe the behavior of the
species youre interested in. Note their arrival
time and when they start using the box.
Continue to monitor your nest box to be sure
predators or competitors do not become a
problem.
Competition for
nesting space
European starlings, English house
sparrows, and many squirrels are cavity nesters
and often compete for nest boxes. The size of
the entry hole is the most important way to
keep out larger species. For example, starlings
cannot fit into a box with a 1
1
2-inch or
smaller opening.
House sparrows defend their nests very
aggressively and are difficult to exclude.
Remove their nest again and again until they
give up and go somewhere else.
Another way to protect the nest is to
attach a piece of metal roof flashing that
extends upward several inches from the top of
the box (see Figure 3). This keeps sparrows
and other birds from attacking the nesting
birds, and makes access to the entrance hole
more difficult for them.
To prevent competing animals from
enlarging the hole, attach a piece of metal
with a hole the same size as the entrance on
the front of the box. Be sure to file down the
edges so they are not sharp.
Protect from predators
Cats, raccoons, snakes, crows, starlings,
and house sparrows are the main predators of
nesting birds. To protect the entrance, make a
Figure 3. A nest box designed to keep birds warm,
dry, and safe from predators.
Extended back and holes
for easy mounting.
Metal flashing or a flattened
aluminum can to keep house
sparrows from interfering with
the entry (if needed).
Roof overhang.
Proper size entry hole
and a predator block (if
needed).
No perch.
Galvanized
screws or nails.
Drainage holes in floor.
A clean-out door that can be opened
easily and closed securely.
Two screws and wire
to keep side door shut.
6
predator block. Attach a block of wood 1 inch
thick with a hole the same size as the entrance
hole over the front of the box (Figure 3). This
creates a short tunnel, which helps prevent
other creatures from reaching easily inside the
box. Be sure to sand the hole in the block to
keep it smooth.
A baffle is another kind of predator
guard. Place a baffle around a tree or post
above or below the nest box to keep mammals
from gaining access to it. You can buy baffles
at specialty bird shops or home and garden
stores. Or, you can create them from a piece of
sheet metal or a stovepipe (Figure 4).
Be sure there are natural or artificial
perches nearby, such as a dead tree, a branch, a
pole, other vegetation, or a manmade struc-
ture, so nesting birds can survey the area
before entering the nest box. Do not place
perches on nest boxes, because they allow
easier access for predators.
Maintenance
The best time to clean nest boxes is
during late winter before birds begin nesting.
Do not try to clean or fix a box while birds are
nesting in it.
When you clean a nest box, be sure to do
the following:
Remove old nesting material.
Unclog drainage holes, entrance holes, and
air holes.
Make sure screws and nails fit properly.
Do not use insecticides. If necessary, wash
out the box with hot water to remove bird
droppings or insects.
Watch out for bees. If bees invade the nest
box, avoid the box until they are gone.
24"
24"
Figure 4. Place a stove pipe or piece of sheet metal around a tree or post to keep mam-
mals away from your nest box. Or, cut a baffle from a piece of sheet metal.
7
For more information
OSU Extension publications
See these other publications in The
Wildlife Garden set:
Attract Hummingbirds to Your Garden,
EC 1541 (2002)
Attract Reptiles and Amphibians to Your Yard,
EC 1542 (2002)
Create a Garden Pond for Wildlife, EC 1548
(2002)
Create a Butterfly Garden, EC 1549 (2002)
Feed Wild Birds, EC 1554 (2002)
Create Roosts for Bats in Your Yard, EC 1555
(2002)
Reduce Deer Damage in Your Yard, EC 1557
(2002)
Many OSU Extension Service publica-
tions may be viewed or downloaded from the
Web. Visit the online Publications and Videos
catalog at http://eesc.oregonstate.edu.
Copies of our publications and videos
also are available from OSU Extension and
Experiment Station Communications. For
prices and ordering information, visit our
online catalog (http://eesc.oregonstate.edu) or
contact us by fax (541-737-0817), e-mail
([email protected]), or phone
(541-737-2513).
Other publications
Henderson, Carrol. 1992. Woodworking for
Wildlife: Homes for Birds and Mammals.
Minnesotas Bookstore, St. Paul,
Minnesota.
Jones, Edwin J. 1995. Building Songbird
Boxes. Working With Wildlife.
http://www.dfr.state.nc.us/stewardship/
wwwildlife/Www16.htm (31 October
2002).
Lincolnshire Wildlife Trust. Building Bird
Nest Boxes. Factsheets.
http://www.cix.co.uk/~lincstrust/
index.html (21 March 2000).
Link, Russell. Landscaping for Wildlife in the
Pacific Northwest. 1999. University of
Washington Press, Seattle and London,
in association with the Washington
Department of Fish and Wildlife.
Shalaway, Scott. 2000. Building a Backyard
Bird Habitat. Stackpole Books,
Mechanicsburg, Pennsylvania.
Texas Parks & Wildlife. Nest Boxes and Bird
Houses. Adventure.
http://www.tpwd.state.tx.us/nature/
birding/birdhous/birdhous.htm (21
March 2000).
2002 Oregon State University
This publication was produced and distributed in furtherance of the Acts of Congress of May 8 and June 30,
1914. Extension work is a cooperative program of Oregon State University, the U.S. Department of Agriculture,
and Oregon counties.
Oregon State University Extension Service offers educational programs, activities, and materialswithout
discrimination based on race, color, religion, sex, sexual orientation, national origin, age, marital status,
disability, or disabled veteran or Vietnam-era veteran status. Oregon State University Extension Service is an
Equal Opportunity Employer.
Published June 2002. Reprinted June 2003.