Universal Pullers

Nut Splitters
Stud Extractors
Special Tools
Tool s for Li fe
8
National Number
0861-GEDORE
(0861-433673)
Code No.
Running
Depth
Max.
Opening
Excl VAT
040010 8564-2 100 110 1000 549.00
040030 8564-3 140 150 1900 748.00
040050 8564-4 200 200 2300 1,044.00
040440 8564-4 HSP1L Puller & Spindle 105 200 3700 3,331.00
Code No.
Running
Depth
Max.
Opening
Excl VAT
040427 8562-1 50 60 200 490.00
040428 8562-2 70 70 300 490.00
Code No.
Running
Depth
Max.
Opening
Excl VAT
040460 8220-20HSP1 Puller & Spindle 90 180 3600 4,365.00
040470 8220-30HSP3 Puller & Spindle 100 280 9900 6,562.00
040480 8220-20L HSP1 Puller & Spindle 90 180 5100 4,620.00
040490 8220-30L HSP3 Puller & Spindle 100 280 13100 7,367.00
Code No.
Running
Depth
Max.
Opening
Excl VAT
040150 8220-10 105 110 1200 1,167.00
040180 8220-20 160 180 3100 2,017.00
040210 8220-30 210 280 8500 4,329.00
040160 8220-10L 200 110 1800 1,302.00
040190 8220-20L 310 180 4500 2,364.00
040220 8220-30L 410 280 11600 5,165.00
Code No. Excl VAT
040170 8220-10P 151 900 460.00
040200 8220-20P 220 2000 756.00
040230 8220-30P 308 5000 1,672.00
PULLERS
8
8562
PULLER with Twin Grip
For removing small parts such as battery terminals, pulleys, wheels,
ball bearings etc.
8220
UNIVERSAL PULLERS
8563
Code No.
Running
Depth
Max.
Opening
Excl VAT
040417 8563-1 55 60 300 607.00
8564
PULLER with Twin Grip
PULLER with Twin Grip
For the safe and fast removal of sheaves, wheels, ball bearings etc.
Strong drop forged design.
Reversible hooks permit use as an internal or external puller.
Available in standard length or with extensions for extra length.
PULLER with Triple Grip
For removing small parts such
as battery terminals, pulleys, wheels,
ball bearings etc.
Code No.
Running
Depth
Max.
Opening
Excl VAT
040070 8566-1 300 300 9800 3,163.00
040080 8566-2 400 400 10800 3,188.00
040495 8566-1 HSP3 Puller & Spindle 105 300 10100 5,633.00
040500 8566-2 HSP3 Puller & Spindle 110 370 11100 5,658.00
Code No.
Running
Depth
Max.
Opening
Excl VAT
040020 8565-2 80 120 1300 808.00
040040 8565-3 140 160 2500 985.00
040060 8565-4 200 220 4000 1,311.00
040450 8565-4 HSP1L Puller & Spindle 105 220 4600 3,728.00
Code No.
Running
Depth
Max.
Opening
Excl VAT
040120 8569-1 80 150 1000 828.00
040140 8569-2 140 200 2700 1,407.00
Code No.
Running
Depth
Max.
Opening
Excl VAT
040110 8568-1 100 150 800 721.00
040130 8568-2 140 200 1900 1,097.00
Code No.
Running
Depth
Max.
Opening
Excl VAT
040090 8567-1 400 350 11900 4,158.00
040100 8567-2 400 420 13000 4,290.00
040505 8567-1 HSP3 Puller & Spindle 110 345 12100 6,305.00
040510 8567-2 HSP3 Puller & Spindle 110 350 13300 6,381.00
PULLERS / SPECIAL TOOLS
8
8565
8566
PULLER with Twin Grip
8567
PULLER with Triple Grip
Suitable for industrial purposes and heavy agricultural
and construction machines
8568
8569
PULLER with Triple Grip
PULLER with Twin Grip
Heavy duty model for the removal of
sheaves, wheels, ball bearings etc
PULLER with Triple Grip
Heavy duty model for the removal of sheaves,
wheels, ball bearings etc
www.gedore.co.za
www.gedore.co.za
www.gedore.co.za
HYDRAULIC PRESSURE SPINDLES
8
Code No.
Force
Capacity
Puller Ref. Excl VAT
040350 HSP1L 6ton - Twin Grip
10ton - Triple Grip
8564-4
8565-4
1300 2,797.00
040360 HSP1 6ton - Twin Grip 8220-20
8220-20L
1200 2,812.00
040400 HSP3 8ton - Twin Grip
12ton - Twin Grip
15ton - Triple Grip
8220-30
8220-30L
8566-1
8566-2
8567-1
8567-2
3300 3,475.00
HSP
HSP Grease Hydraulic Pressure Spindle
The grease-hydraulic pressure spindle has been designed for
controlled and safe pulling work, and is set up for a pressure of up
to 15 t.
UNIVERSAL PULLERS
Hydraulic bolt
Grub screw
Hydraulic spindle
Tip
Ball 9/16 or 5/8
1
Preparation for use:
1. Before using, check whether the pressure spindle is screwed far enough out of the cap, so that the pressure pad is in the initial position
in the hydraulic cylinder.
2. Unscrew the cap from the spindle body. First slacken off the grub screw.
3. Screw the spindle body from below into the crossbeam of the puller until the body protrudes approx. 60 mm from the crossbeam.
4. Screw the cap onto the spindle body until the stop, and then x it in position by turning in the grub screw.
Use and operation:
1. Place the puller into position and
pre-tension the spindle body using a
size 32 or 41 mm wrench.
2. Screw the pressure spindle size 12 or
17 mm into the cap. The hydraulic
process will come into play.
The workpiece that has been loosened
by the hydraulic force may be pulled off
completely by turning the spindle body
with the 32 or 41 mm cap.
3. After use, the pressure spindle (size 12
or 17 mm) is turned back into its initial
position and the pressure pad pushed
into the hydraulic cylinder.
HSP Grease Hydraulic Pressure Spindle
....The grease-hydraulic pressure spindle has been designed for controlled and safe
pulling work, and is set up for a pressure of up to 15 t.
5 6
2 4 3
Adjusting cap nut
Code No. mm Excl VAT
041010 8600-1 4 - 10 290 485.50
041020 8600-2 8 - 25 570 705.00
Code No.
For nuts
up to
Max. ton Excl VAT
040790 1.26/1 22 5 700 3,060.00
040870 1.26/2 32 13 3800 4,974.00
PULLERS / SPECIAL TOOLS
8
1.26
NUT SPLITTER
HYD NUT SPLITTER - Hydraulic
For splitting jammed or stripped nuts without damaging the bolt thread.
With strong chisel, additionally induction hardened at
the cutting edge for breakage resistance.
The chamfer at the chisels edge improves
the splitting effect and prevents breakage.
8600
STUD EXTRACTOR
For inserting and removing studs
Suitable for extremely short stud ends.
STUD EXTRACTOR
UNIVERSAL PULLERS
1.07/K
PULLER SET
In plastic case.
Dimensions - 120 x 250mm
Code No. Excl VAT
8117340 1.07/K 5000 8,316.00
Contents: 2-arm cross piece
3-arm cross piece
3 x pulling hooks - 100mm
3 x pulling hooks - 200mm
3 x slim pattern pulling hooks - 250mm
o
Code No. for Puller
Clamping
Range
Excl VAT
8019680 1.40/0 1.38/0 5 - 60 1100 936.00
8019760 1.40/1 1.38/1 12 - 75 3600 1,188.00
8019840 1.40/2 1.38/2 22 - 115 2300 1,953.00
8019920 1.40/3 1.38/3 30 - 155 4400 3,061.00
Code No.
Running
Depth
Max.
Opening
Excl VAT
8017550 1.38/0 160 120 1000 912.00
8017630 1.38/1 230 165 2400 1,501.00
8017710 1.38/2 250 215 3800 2,224.00
8017980 1.38/3 270 300 7200 3,376.00
Code No.
Running
Depth
Max.
Opening
Excl VAT
8006190 1.15/1 140 130 1100 1,144.00
8006350 1.15/2 210 200 2900 1,985.00
PULLERS / SPECIAL TOOLS
8
o
Code No. Excl VAT
1120778 1.85/1 4600 14,025.00
Contents: 33 x Impact Rings
-10-50mm for external 26-110mm
Recoil-free hammer - 1,2kg
3 x Aluminium sleeves
1.15
PULLER with Triple Grip
Heavy duty model for the removal
of sheaves, wheels, ball bearings etc
1.38
SEPARATOR PULLER
Used together with the bearing separators
1.40 series.
The tension bolts are screwed into
the threaded holes in the bearing
separator.
1.40
SPECIAL TOOLS
1.73
UNIVERSAL BALL JOINT PULLER
For removing ball joints on cars and trucks.
Code No.
Clamping
Height
Fork
Depth
Excl VAT
8030810 1.73/1 65 24 1100 1,238.00
1.85
BEARING INSTALLATION SET
Sturdy plastic bearing installation set. Impact resistant plastic is light,
but as robust as metal variants. This set guarantees that the installed
bearings will suffer no damage that might have occured when working
metal to metal Ensures no
deformations of the bearing
housings, sealing rings or
shafts.
BEARING SEPARATOR
For removing taper roller and ball bearings, inner bearing races and
other tightley-seated or thin walled parts.
Operation:
The sharp edges of the separator
blades are pressed behind the part
and it is then withdrawn using
the 1.38 puller.
To avoid damage to delicate
parts, the at surfaces
of the separator are used.
This produces a large
support surface that
prevents deformation.
8551
Code No. Excl VAT
6759890 8551-88 Bolt Extractor Set 750 1,218.00
Sizes: 1 2 3 4 5 6 7 8
BOLT EXTRACTOR SET
Drill a central hole into the broken bolt.
Turn the bolt extractor to the left into
this hole until it grips and removes
the bolt. Always use the maximum
possible extractor size.
Contents
2-arm cross piece - 140mm
3-arm cross piece - 140mm
3 x pulling hooks - 100mm
3 x slim pattern pulling hooks - 100mm
2-arm battery terminal puller
Nut splitter
Stud extractor
Dismantling & Assembly fork
Universal ball joint puller
Oil lter hook
Contents
4 x 2-arm cross piece
140mm 180mm 220mm 260mm
4 x 3-arm cross piece
140mm 180mm 220mm 260mm
2 x Spindles
Hydraulic pressure spindle
6 x Pulling hooks
Contents
2-arm cross piece - 260mm
3-arm cross piece - 260mm
3 x pulling hooks - 100mm
3 x pulling hooks - 300mm
3 x slim pattern pulling hooks - 220mm
Spindle
Hydraulic pressure spindle
Bearing separator
Contents
2 x 2-arm heads
2 x 3-arm heads
3 x pulling hooks - 210mm
3 x pulling hooks - 260mm
3 x pulling hooks - 390mm
2 x Spindles
Hydraulic pressure spindle
PULLER KITS
8
2.20
TRUCK WORKSHOP KIT
Clearly arranged modular system on pegboard.
2.30
INDUSTRY PULLING KIT
For the assembly of 1.06 and 1.07 pullers.
Clearly arranged modular system on pegboard.
2.40
CONSTRUCTION MACHINES KIT
For the assembly of 1.14 and 1.15 pullers.
Clearly arranged modular system on pegboard.
2.10
CAR WORKSHOP KIT
Clearly arranged modular system on pegboard.
Code No. Excl VAT
1088696 2.10PKW 11500 11,349.00
Code No. Excl VAT
1393014 2.30 11500 15,796.00
Code No. Excl VAT
1393030 2.40 11500 13,274.00
Code No. Excl VAT
1088718 2.20LKW 14000 19,118.00
Contents
8220-20 Twin Grip Puller
8220-20P Extensions
8565-4 Triple Grip Puller
HSP 1 Hydraulic Pressure Spindle
8569-2 Universal Triple Grip Puller
8600-2 Stud Extractor
267-40 Hammer
1450S Tool Panel
Contents
8220-10 Twin Grip Puller
8220-10P Extensions
8562-2 Battery Terminal Puller
8565-2 Triple Grip Puller
8569-1 Universal Triple Grip Puller
8600-2 Stud Extractor
1.38-0 Separator Puller
1.40-0 Bearing Separator Puller
1.73-1 Ball Joint Puller
1.75-1 Oil Filter Remover
267-40 Hammer
1450S Tool Panel
PULLER KITS
8
INDUSTRIAL KIT
Clearly arranged modular
system on pegboard.
Code No. Excl VAT
634840 Industrial Puller Kit 19311 9,759.00
CAR WORKSHOP KIT
Clearly arranged modular
system on pegboard.
Code No. Excl VAT
634859 Car Workshop Puller Kit 14811 8,840.00
www.gedore.co.za
www.gedore.co.za
www.gedore.co.za
N
ew
N
ew