Scribd Logo
Upload

Welcome to Scribd!

  • 189 views

    Comsab II Driver For Siemens s5-115

    Uploaded by

    abuzer1981
    This document provides information about a driver for communicating between York Refrigeration's Comsab II system and Siemens S5 PLCs. The driver allows up to 14 compressors to have data read and written. Each compressor has its own data block that can store up to 29 read values and 10 write values. The document includes examples of how to configure the data blocks to define what points to read and write for each compressor. It also provides details on the hardware connections between Comsab II and Siemens PLC CP 523 cards.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Comsab II Driver For Siemens s5-115

    Uploaded by

    abuzer1981
    189 views3 pages
    This document provides information about a driver for communicating between York Refrigeration's Comsab II system and Siemens S5 PLCs. The driver allows up to 14 compressors to have data read and written. Each compressor has its own data block that can store up to 29 read values and 10 write values. The document includes examples of how to configure the data blocks to define what points to read and write for each compressor. It also provides details on the hardware connections between Comsab II and Siemens PLC CP 523 cards.

    Original Title

    Comsab II Driver for Siemens s5-115

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides information about a driver for communicating between York Refrigeration's Comsab II system and Siemens S5 PLCs. The driver allows up to 14 compressors to have data read and written. Each compressor has its own data block that can store up to 29 read values and 10 write values. The document includes examples of how to configure the data blocks to define what points to read and write for each compressor. It also provides details on the hardware connections between Comsab II and Siemens PLC CP 523 cards.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    189 views3 pages

    Comsab II Driver For Siemens s5-115

    Uploaded by

    abuzer1981
    This document provides information about a driver for communicating between York Refrigeration's Comsab II system and Siemens S5 PLCs. The driver allows up to 14 compressors to have data read and written. Each compressor has its own data block that can store up to 29 read values and 10 write values. The document includes examples of how to configure the data blocks to define what points to read and write for each compressor. It also provides details on the hardware connections between Comsab II and Siemens PLC CP 523 cards.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 3

    YORK Refrigeration, Controls

    Jens Juuls Vej 28, 8260 Viby J, Denmark


    Phone +45 86 28 79 11, Fax +45 86 28 71 44
    CVR No 10301491 F:\SABROE CONTROLS GROUP\IVH\COMSAB II PLC DRIVER DOKUMENTATION KOPI AF\SIEMENS S5.DOC
    1
    Comsab Driver for Siemens PLC Type S5
    1 Hardware
    Siemens PLC 115U, CPU 941, 942, 943
    CP 523 card, 6ES5 523-3UA11
    Please note:
    - for 135U the CPU 928B is used + RS232 insert module
    - for 115U the CP 523 card is used
    2 Function
    In DB100 is keyed in how many values that are wanted read/written in the connected
    compressors. The compressors are keyed in succession: 1-2-3-4 etc. and no holes
    must occur. Each compressor has its own DB (DB70 DB83). Here is keyed in the
    wanted values to be read/written (HEX-number, see York Comsab II manual).
    Further, the values that are wanted transferred to the compressor are keyed in.
    Max 14 compressors
    Max 29 reading points per compressor
    Max 10 writing points per compressor
    3 DBes for compressors
    DB 70 (compressor 1)
    DB 71 (compressor 2)
    DB 72 (compressor 3)
    DB 73 (compressor 4)
    -
    -
    -
    -
    -
    DB 83 (compressor 14)
    4 Grouping of the DBes for the compressors
    DW 1: Hex. number for the wanted points in Comsab to be read (see
    Comsab II manual read list)
    DW 2:
    -:
    -:
    -:
    DW 29:
    DW 50: Answer from Comsab (integer KF)
    Answer is multiplied by a factor 10.
    DW 51:
    -:
    -:
    DW78:
    YORK Refrigeration, Controls
    Jens Juuls Vej 28, 8260 Viby J, Denmark
    Phone +45 86 28 79 11, Fax +45 86 28 71 44
    CVR No 10301491 F:\SABROE CONTROLS GROUP\IVH\COMSAB II PLC DRIVER DOKUMENTATION KOPI AF\SIEMENS S5.DOC
    2
    Answer from question in DW 1 is read in DW 50.
    Answer from question in DW 2 is read in DW 51 etc.
    DW 100: Hex number for the wanted points in Comsab to be written to.
    DW 101:
    -:
    -:
    DW 109:
    DW 150: Value for Comsab (Integer KF)
    Value must be multiplied by a factor 10.
    DW 151:
    -:
    -:
    DW 159:
    Value in DW 150 belongs to DW 100.
    Value in DW 151 belongs to DW 101 etc.
    5 Example of keying into DB100
    5.1
    DW 1: KF +10 (read 10 points in compressor 1)
    DW 31: KF +3 (write 3 points in compressor 1)
    DW 2: KF +12 (read 12 points in compressor 2)
    DW 32: KF +2 (write 2 points in compressor 2)
    etc.
    In general
    DW 1 DW 14 reading point number for compr. 1
    14
    DW 31 DW 44 writing point number for compr. 1
    14
    If the contents in one of these data words = 0, then the driver restarts from 1.
    5.2 Example for compressor 2
    Number of values that is to be read/keyed into DW 2 and number of values
    that is to be written/keyed into DW 32.
    Read 5 values + write 2 values in compressor 2:
    DW 2: KF + 5, DW 32: KF + 2
    Example for compressor 4
    Read 4 values in compressor 4:
    DW 4: KF + 4, DW 34: KF + 0
    5.3 If a compressor is not connected to the system
    then write KF + 0 in the belonging DW
    YORK Refrigeration, Controls
    Jens Juuls Vej 28, 8260 Viby J, Denmark
    Phone +45 86 28 79 11, Fax +45 86 28 71 44
    CVR No 10301491 F:\SABROE CONTROLS GROUP\IVH\COMSAB II PLC DRIVER DOKUMENTATION KOPI AF\SIEMENS S5.DOC
    3
    6. Examples of keying into DB for compressor
    6.1 Compressor 7
    wants to read A: Oil temperature (22 H)
    B: Suction temperature (20 H)
    To Comsab
    DB 76 DW 1 KH 26 22
    DW 2 KH 26 20
    From Comsab
    DB 76 DW 50 KF value (oil temperature)
    DW 51 KF value (suction temperature)
    6.2 Compressor 3
    Wants to write A: set point 1 Suction pressure (2FH)
    B set point 2 Suction pressure (3OH)
    To Comsab
    DB 72 DW 100 KH 22 2F
    DW 101 KH 22 30
    DW 150 KF 234 (-23.4 C)
    DW 151 KF 325 (- 32.5 C)
    The values in DW 150 and DW 151 are transferred to Comsab.
    7. Cable
    Comsab II Siemens PLC (CP 523)
    No connec. Screen 1
    Pin no. 8 (Rx) - 11
    Pin no. 2(Tx) - 5
    Pin no. 1(Gnd) - 21
    -
    Plug (9 pole) (25 pole)

    You might also like