Technical Data

1756 ControlLogix Controllers

ControlLogix Controller Catalog Numbers
1756-L61, 1756-L62, 1756-L63, 1756-L63XT, 1756-L64, 1756-L65, 1756-L71,
1756-L72, 1756-L73, 1756-L73XT, 1756-L74, 1756-L75
GuardLogix Controller Catalog Numbers 1756-L61S, 1756-L62S, 1756-L63S, 1756-LSP,
1756-L71S, 1756-L72S, 1756-L73S, 1756-L7SP, 1756-L73SXT, 1756-L7SPXT
Armor GuardLogix Catalog Number 1756-L72EROMS
ControlLogix Redundancy Catalog Numbers 1756-RM, 1756-RMXT, 1756-RM2, 1756-RM2XT
Topic Page
1756 ControlLogix Controllers 2
1756 ControlLogix-XT Controllers 8
1756 GuardLogix Controllers 13
1756 GuardLogix-XT Controllers 19
1756 Armor GuardLogix Controller 21
Controller Memory Use 24
Controller Compatibility 25
ControlLogix Redundancy 27
ControlLogix Connections 30
ControlLogix Controller Accessories 31
2 Rockwell Automation Publication 1756-TD001H-EN-P - December 2013
1756 ControlLogix Controllers
1756 ControlLogix Controllers
The ControlLogix controller provides a scalable controller solution that is capable of addressing a large amount of I/O
points. The ControlLogix controller can be placed into any slot of a ControlLogix I/O chassis and multiple controllers can
be installed in the same chassis.
ControlLogix controllers can monitor and control I/O across the ControlLogix backplane, as well as over network links.
To provide communication for a ControlLogix controller, install the appropriate communication interface module into the
chassis.
1756-L7x ControlLogix Controllers Features and Specifications
Feature 1756-L71, 1756-L72, 1756-L73, L73XT, 1756-L74, 1756-L75
Controller tasks 32 tasks
100 programs/task
Event tasks: all event triggers
Built-in communication ports 1 port USB
(1)
(1) The USB port is intended for temporary local programming purposes only and not intended for permanent connection. Do not use the USB port in hazardous locations.
Communication options EtherNet/IP
ControlNet
DeviceNet
Data Highway Plus
Remote I/O
SynchLink
Third-party process and device networks
USB port communication Programming, configuration, firmware flash and on-line edits only
Controller connections supported, max 500
Network connections, per network module 100 ControlNet (1756-CN2/A)
40 ControlNet (1756-CNB/D, 1756-CNB/E)
128 ControlNet (1756-CN2/B)
256 EtherNet/IP; 128 TCP (1756-EN2x)
128 EtherNet/IP; 64 TCP (1756-ENBT)
Controller redundancy Full support
Integrated motion SERCOS interface
Analog options (encoder input, LDT input, SSI input)
EtherNet/IP (CIP Motion)
Programming languages Relay ladder
Structured text
Function block
SFC
Rockwell Automation Publication 1756-TD001H-EN-P - December 2013 3
1756 ControlLogix Controllers
Table 1 - Technical Specifications - 1756-L7x ControlLogix Controllers
Attribute 1756-L71 1756-L72 1756-L73 1756-L74 1756-L75
User memory 2 MB 4 MB 8 MB 16 MB 32 MB
I/O memory 0.98 MB
Optional nonvolatile memory storage 1 GB (1784-SD1 ships with every controller)
2 GB (1784-SD2)
Digital I/O, max 128,000
Analog I/O, max 4000
Total I/O, max 128,000
Energy storage module 1756-ESMCAP capacitor energy storage module (removable, ships installed with every controller)
1756-ESMNSE capacitor energy storage module (removable, no residual WallClockTime power backup)
1756-ESMNRM capacitor energy storage module (nonremovable, secures controller by preventing USB connection an d SD card use)
Current draw @ 1.2V DC 5 mA
Current draw @ 5.1V DC 800 mA
Power dissipation 2.5 W
Thermal dissipation 8.5 BTU/hr
Isolation voltage 30V (continuous), basic insulation type, USB port-to-system
Type tested at 500V AC for 60 s
USB port
(1)
(1) The USB port is intended for temporary local programming purposes only and not intended for permanent connection. Do not use the USB port in hazardous locations.
USB 2.0, full speed (12 Mbps)
Weight, approx 0.25 kg (0.55 lb)
Slot width 1
Module location Chassis-based, any slot
Chassis 1756-A4, 1756-A7, 1756-A10, 1756-A13, 1756-A17
Power supply, standard 1756-PA72, 1756-PA75, 1756-PB72, 1756-PB75
Power supply, redundant 1756-PA75R, 1756-PB75R, 1756-PSCA2
Wire category
(2)
(2) Use this conductor category information for planning conductor routing. Refer to Industrial Automation Wiring and Grounding Guidelines, publication 1770-4.1.
3 - on USB port
North American temperature code T4A
IEC temperature code T4
Enclosure type rating None (open-style)
4 Rockwell Automation Publication 1756-TD001H-EN-P - December 2013
1756 ControlLogix Controllers

Table 2 - Environmental Specifications - 1756-L7x ControlLogix Controllers
Attribute 1756-L71, 1756-L72, 1756-L73, 1756-L74, 1756-L75
Temperature, operating
IEC 60068-2-1 (Test Ad, Operating Cold),
IEC 60068-2-2 (Test Bd, Operating Dry Heat),
IEC 60068-2-14 (Test Nb, Operating Thermal Shock)
060 C (32140 F)
Temperature, nonoperating
IEC 60068-2-1 (Test Ab, Unpackaged Nonoperating Cold),
IEC 60068-2-2 (Test Bb, Unpackaged Nonoperating Dry Heat),
IEC 60068-2-14 (Test Na, Unpackaged Nonoperating Thermal Shock)
-4085 C (-40185 F)
Temperature, surrounding air, max 60 C (140 F)
Relative humidity
IEC 60068-2-30 (Test Db, Unpackaged Damp Heat)
595% noncondensing
Vibration
IEC 60068-2-6 (Test Fc, Operating)
2 g @ 10500 Hz
Shock, operating
IEC 60068-2-27 (Test Ea, Unpackaged Shock)
30 g
Shock, nonoperating
IEC 60068-2-27 (Test Ea, Unpackaged Shock)
50 g (45 g with SD card installed)
Emissions
CISPR 11
IEC 61000-6-4
Class A
ESD immunity
IEC 61000-4-2
6 kV contact discharges
8 kV air discharges
Radiated RF immunity
IEC 61000-4-3
10V/m with 1 kHz sine-wave 80% AM from 802000 MHz
10V/m with 200 Hz 50% Pulse 100% AM @ 900 MHz
10V/m with 200 Hz 50% Pulse 100% AM @ 1890 MHz
3V/m with 1 kHz sine-wave 80% AM from 20002700 MHz
Table 3 - Certifications - 1756-L7x ControlLogix Controllers
Certification
(1)
(1) When marked. See the Product Certification link at http://www.ab.com for Declarations of Conformity, Certificates, and other certification details.
1756-L71, 1756-L72, 1756-L73, 1756-L74, 1756-L75
c-UL-us UL Listed Industrial Control Equipment, certified for US and Canada. See UL File E65584.
UL Listed for Class I, Division 2 Group A,B,C,D Hazardous Locations, certified for U.S. and Canada. See UL File E194810.
CE European Union 2004/108/EC EMC Directive, compliant with:
EN 61326-1; Meas./Control/Lab., Industrial Requirements
EN 61000-6-2; Industrial Immunity
EN 61000-6-4; Industrial Emissions
EN 61131-2; Programmable Controllers (Clause 8, Zone A & B)
C-Tick Australian Radio communications Act, compliant with:
AS/NZS CISPR 11; Industrial Emissions
Ex European Union 94/9/EC ATEX Directive, compliant with:
EN 60079-15; Potentially Explosive Atmospheres, Protection n
EN 60079-0; General Requirements
II 3 G Ex nA IIC T4 X
KC Korean Registration of Broadcasting and Communications Equipment, compliant with:
Article 58-2 of Radio Waves Act, Clause 3
Rockwell Automation Publication 1756-TD001H-EN-P - December 2013 5
1756 ControlLogix Controllers
1756-L6x ControlLogix Controllers Features and Specifications
Table 4 - Features - Standard ControlLogix 1756-L6x Controllers
Feature 1756-L61, 1756-L62, 1756-L63, L63XT, 1756-L64, 1756-L65
Controller tasks 32 tasks
100 programs/task
Event tasks: all event triggers
Built-in communication ports 1 port RS-232 serial
Communication options EtherNet/IP
ControlNet
DeviceNet
Data Highway Plus
Remote I/O
SynchLink
Third-party process and device networks
Serial port communication ASCII
DF1 full/half-duplex
DF1 radio modem
DH-485
Modbus via logic
Controller connections supported, max 250
Network connections, per network module 100 ControlNet (1756-CN2/A)
40 ControlNet (1756-CNB/D, 1756-CNB/E)
128 ControlNet (1756-CN2/B)
256 EtherNet/IP; 128 TCP (1756-EN2x)
128 EtherNet/IP; 64 TCP (1756-ENBT)
Controller redundancy Full support
Integrated motion SERCOS interface
Analog options (encoder input, LDT input, SSI input)
EtherNet/IP (CIP Motion)
Programming languages Relay ladder
Structured text
Function block
SFC
IMPORTANT Scan time for a project loaded in a 1756-L64 or 1756-L65 controller may be slower than for the same project loaded in one of the
other 1756-L6x controllers. See the Logix5000 Controllers Instruction Execution Time and Memory Use Reference Manual,
publication 1756-RM087, for instruction execution times.
6 Rockwell Automation Publication 1756-TD001H-EN-P - December 2013
1756 ControlLogix Controllers
Table 5 - Technical Specifications - 1756-L6x ControlLogix Controllers
Attribute 1756-L61 1756-L62 1756-L63 1756-L64 1756-L65
User memory 2 MB 4 MB 8 MB 16 MB 32 MB
I/O memory 478 KB
Optional nonvolatile memory storage 128 MB (1784-CF128)
Digital I/O, max 128,000
Analog I/O, max 4000
Total I/O, max 128,000
Replacement battery
(1)
(1) For Australian Mining certification applications, only a series A controller and a 1756-BA1 battery can be used. For more information, contact your local distributor or sales office.
Series A: 1756-BA1, 1756-BATM, 1756-BATA
Series B: 1756-BA2
1756-BA2 (0.50 g Lithium)
Current draw @ 5.1V DC 1200 mA
Current draw @ 24V DC 14 mA
Power dissipation 3.5 W
Thermal dissipation 11.9 BTU/hr
Isolation voltage 30V (continuous), basic insulation type, RS-232 to system
Type tested at 720V DC for 60 s
Serial cables 1756-CP3 or 1747-CP3, right angle connector to controller, straight to serial port, 3 m (9.84 ft)
Weight, approx Series A: 0.32 kg, (0.71 lb)
Series B: 0.35 kg, (0.78 lb)
Slot width 1
Module location Chassis-based, any slot
Chassis 1756-A4, 1756-A7, 1756-A10, 1756-A13, 1756-A17
Power supply, standard 1756-PA72, 1756-PA75, 1756-PB72, 1756-PB75
Power supply, redundant 1756-PA75R, 1756-PB75R, 1756-PSCA2
Wire category
(2)
(2) Use this conductor category information for planning conductor routing as described in the system level installation manual. See the Industrial Automation Wiring and Grounding Guidelines,
publication 1770-4.1.
2 - on RS-232 port
North American temperature code T4A
Enclosure type rating None (open-style)
Rockwell Automation Publication 1756-TD001H-EN-P - December 2013 7
1756 ControlLogix Controllers
Table 6 - Environmental Specifications - 1756-L6x ControlLogix Controllers
Attribute 1756-L61, 1756-L62, 1756-L63, 1756-L64, 1756-L65
Temperature, operating
IEC 60068-2-1 (Test Ad, Operating Cold),
IEC 60068-2-2 (Test Bd, Operating Dry Heat),
IEC 60068-2-14 (Test Nb, Operating Thermal Shock)
060 C (32140 F)
Temperature, storage
IEC 60068-2-1 (Test Ab, Unpackaged Nonoperating Cold),
IEC 60068-2-2 (Test Bb, Unpackaged Nonoperating Dry Heat),
IEC 60068-2-14 (Test Na, Unpackaged Nonoperating Thermal Shock)
-4085 C (-40185 F)
Temperature, surrounding air, max 60 C (140 F)
Relative humidity
IEC 60068-2-30 (Test Db, Unpackaged Damp Heat)
595% noncondensing
Vibration
IEC 60068-2-6 (Test Fc, Operating)
2 g @ 10500 Hz
Shock, operating
IEC 60068-2-27 (Test Ea, Unpackaged Shock)
30 g
Shock, nonoperating
IEC 60068-2-27 (Test Ea, Unpackaged Shock)
50 g
Emissions
CISPR 11
IEC 61000-6-4
Class A
ESD immunity
IEC 61000-4-2
6 kV contact discharges
8 kV air discharges
Radiated RF immunity
IEC 61000-4-3
10V/m with 1 kHz sine-wave 80% AM from 802000 MHz
10V/m with 200 Hz 50% Pulse 100% AM @ 900 MHz
10V/m with 200 Hz 50% Pulse 100% AM @ 1890 MHz
3V/m with 1 kHz sine-wave 80% AM from 20002700 MHz
EFT/B immunity
IEC 61000-4-4
4 kV at 5 kHz on RS-232 port
Surge transient immunity
IEC 61000-4-5
2 kV line-earth (CM) on RS-232 port
Conducted RF immunity
IEC 61000-4-6
10V rms with 1 kHz sine-wave 80% AM from 150 kHz80 MHz
8 Rockwell Automation Publication 1756-TD001H-EN-P - December 2013
1756 ControlLogix Controllers
1756 ControlLogix-XT Controllers
The ControlLogix-XT controllers function in the same way as the traditional ControlLogix controllers. The
ControlLogix-XT products include control and communication system components that are conformally coated for
extended protection in harsh, corrosive environments:
When used with FLEX I/O-XT products, the ControlLogix-XT system can withstand temperature ranges from
-2070 C (-4158 F).
When used independently, the ControlLogix-XT system can withstand temperature ranges from -2570 C
(-13158 F).
Equipment designated as LXT is certified for use only within a surrounding air temperature of -2560 C
(-13140 F) even when used with other XT equipment.
Table 7 - Certifications - 1756-L6x ControlLogix Controllers
Certification
(1)
(1) When marked. See the Product Certification link at http://www.ab.com for Declarations of Conformity, Certificates, and other certification details.
1756-L61, 1756-L62, 1756-L63, 1756-L64, 1756-L65
c-UL-us UL Listed Industrial Control Equipment, certified for US and Canada. See UL File E65584.
UL Listed for Class I, Division 2 Group A,B,C,D Hazardous Locations, certified for U.S. and Canada. See UL File E194810.
CSA CSA Certified Process Control Equipment. See CSA File LR54689C.
CSA Certified Process Control Equipment for Class I, Division 2 Group A,B,C,D Hazardous Locations. See CSA File LR69960C.
CE European Union 2004/108/EC EMC Directive, compliant with:
EN 61326-1; Meas./Control/Lab., Industrial Requirements
EN 61000-6-2; Industrial Immunity
EN 61000-6-4; Industrial Emissions
EN 61131-2; Programmable Controllers (Clause 8, Zone A & B)
C-Tick Australian Radio communications Act, compliant with:
AS/NZS CISPR 11; Industrial Emissions
Ex European Union 94/9/EC ATEX Directive, compliant with:
EN 60079-15; Potentially Explosive Atmospheres, Protection n
EN60079-0; General Requirements
II 3 G Ex nA IIC T4 X
IMPORTANT: The 1756-L64 and 1756-L65 controllers do not have this certification.
KC Korean Registration of Broadcasting and Communications Equipment, compliant with:
Article 58-2 of Radio Waves Act, Clause 3
FM FM Approved Equipment for use in Class I Division 2 Group A,B,C,D Hazardous Locations
Rockwell Automation Publication 1756-TD001H-EN-P - December 2013 9
1756 ControlLogix Controllers
1756-L73XT ControlLogix Controller Specifications
Table 8 - Technical Specifications - 1756-L73XT ControlLogix Controller
Attribute 1756-L73XT
User memory 8 MB
I/O memory 0.98 MB
Optional nonvolatile memory 1 GB (1784-SD1 ships with every controller)
2 GB (1784-SD)
Digital I/O, max 128,000
Analog I/O, max 4000
Total I/O, max 128,000
Replacement battery
Energy storage modules 1756-ESMCAPXT capacitor energy storage module (removable, ships installed with every controller)
1756-ESMNSEXT capacitor energy storage module (removable, no residual WallClockTime power backup)
1756-ESMNRMXT capacitor energy storage module (nonremovable, secures controller by preventing USB
connection and SD card use)
Current draw @ 5.1V DC 800 mA
Current draw @ 1.2V DC 5 mA
Power dissipation 2.5 W
Thermal dissipation 8.5 BTU/hr
Isolation voltage 30V (continuous), basic insulation type, USB port to backplane
Type tested at 500V AC for 60 s
USB port
(1)
(1) The USB port is intended for temporary local programming purposes only and not intended for permanent connection. Do not use the USB port in hazardous locations.
USB 2.0, full speed (12 Mbps)
Weight, approx 0.25 kg (0.55lb)
Slot width 1
Module location Chassis-based, any slot
Chassis 1756-A4LXT, 1756-A5XT, 1756-A7LXT, 1756-A7XT
Power supply, standard 1756-PAXT, 1756-PBXT
Power supply, redundant None
Wire category
(2)
(2) Use this conductor category information for planning conductor routing. Refer to the Industrial Automation Wiring and Grounding Guidelines, publication 1770-4.1.
3 - on USB ports
North American temperature code T4A
IEC temperature code T4
Enclosure type rating None (open-style)
10 Rockwell Automation Publication 1756-TD001H-EN-P - December 2013
1756 ControlLogix Controllers
Table 9 - Environmental Specifications - 1756-L73XT ControlLogix Controller
Attribute 1756-L73XT
Temperature, operating
IEC 60068-2-1 (Test Ad, Operating Cold),
IEC 60068-2-2 (Test Bd, Operating Dry Heat),
IEC 60068-2-14 (Test Nb, Operating Thermal Shock)
-2570 C (-13158 F)
When using a 1756-A7LXT chassis, surrounding air temperature range is
-2560 C (-13140 F) even when using an XT controller.
Temperature, nonoperating
IEC 60068-2-1 (Test Ab, Unpackaged Nonoperating Cold),
IEC 60068-2-2 (Test Bb, Unpackaged Nonoperating Dry Heat),
IEC 60068-2-14 (Test Na, Unpackaged Nonoperating Thermal Shock)
-4085 C (-40185 F)
Temperature, surrounding air, max 70 C (158 F)
Relative humidity
IEC 60068-2-30 (Test Db, Unpackaged Damp Heat)
595% noncondensing
Vibration
IEC 60068-2-6 (Test Fc, Operating)
2 g @ 10500 Hz
Shock, operating
IEC 60068-2-27 (Test Ea, Unpackaged Shock)
30 g
Shock, nonoperating
IEC 60068-2-27 (Test Ea, Unpackaged Shock)
50 g
(45 g with SD card installed)
Emissions
CISPR 11
IEC 61000-6-4
Class A
ESD immunity
IEC 61000-4-2
6 kV contact discharges
8 kV air discharges
Radiated RF immunity
IEC 61000-4-3
10V/m with 1 kHz sine-wave 80% AM from 802000 MHz
10V/m with 200 Hz 50% Pulse 100% AM @ 900 MHz
10V/m with 200 Hz 50% Pulse 100% AM @ 1890 MHz
3V/m with 1 kHz sine-wave 80% AM from 20002700 MHz
Table 10 - Certifications - 1756-L73XT ControlLogix Controller
Certification
(1)
(1) When marked. See the Product Certification link at http://www.ab.com for Declarations of Conformity, Certificates, and other certification details.
1756-L73XT
c-UL-us UL Listed Industrial Control Equipment, certified for US and Canada. See UL File E65584.
UL Listed for Class I, Division 2 Group A,B,C,D Hazardous Locations, certified for U.S. and Canada. See UL File E194810.
CE European Union 2004/108/EC EMC Directive, compliant with:
EN 61000-6-4; Industrial Emissions
EN 61326-1; Meas./Control/Lab., Industrial Requirements
EN 61000-6-2; Industrial Immunity
EN 61131-2; Programmable Controllers (Clause 8, Zone A & B)
C-Tick Australian Radio communications Act, compliant with: AS/NZS CISPR 11; Industrial Emissions
Ex European Union 94/9/EC ATEX Directive, compliant with:
EN 60079-15; Potentially Explosive Atmospheres, Protection n
EN 60079-0; General Requirements
II 3 G Ex nA IIC T4 X
KC Korean Registration of Broadcasting and Communications Equipment, compliant with:
Article 58-2 of Radio Waves Act, Clause 3
Rockwell Automation Publication 1756-TD001H-EN-P - December 2013 11
1756 ControlLogix Controllers
1756-L63XT ControlLogix Controller Specifications
Table 11 - Technical Specifications - 1756-L63XT Controller
Attribute 1756-L63XT
User memory 8 MB
I/O memory 478 KB
Optional nonvolatile memory storage 128 MB (1784-CF128)
Digital I/O, max 128,000
Analog I/O, max 4000
Total I/O, max 128,000
Replacement battery 1756-BA2
Current draw @ 5.1V DC 1200 mA
Current draw @ 24V DC 14 mA
Power dissipation 3.5 W
Thermal dissipation 11.9 BTU/hr
Isolation voltage 30V (continuous), basic insulation type, RS-232 port to system
Type tested at 720V DC for 60 s
Serial cables 1756-CP3 or 1747-CP3, right angle connector to controller, straight to serial port, 3 m
(9.84 ft)
Weight, approx 0.35 kg (0.78 lb)
Slot width 1
Module location Chassis-based, any slot
Chassis 1756-A4LXT, 1756-A5XT, 1756-A7LXT, 1756-A7XT
Power supply, standard 1756-PBXT, 1756-PAXT
Power supply, redundant None
Wire category
(1)
(1) Use this conductor category information for planning conductor routing as described in the system level installation manual. See the Industrial Automation Wiring and Grounding Guidelines,
publication 1770-4.1.
2 - on RS-232 port
North American temperature code T4A
IEC temperature code T4
Enclosure type rating None (open-style)
12 Rockwell Automation Publication 1756-TD001H-EN-P - December 2013
1756 ControlLogix Controllers
Table 12 - Environmental Specifications - 1756-L63XT Controller
Attribute 1756-L63XT
Temperature, operating
IEC 60068-2-1 (Test Ad, Operating Cold),
IEC 60068-2-2 (Test Bd, Operating Dry Heat),
IEC 60068-2-14 (Test Nb, Operating Thermal Shock)
-2570 C (-13158 F)
When using a 1756-A7LXT chassis, surrounding air temperature range is
-2560 C (-13140 F) even when using an XT controller
Temperature, storage
IEC 60068-2-1 (Test Ab, Unpackaged Nonoperating Cold),
IEC 60068-2-2 (Test Bb, Unpackaged Nonoperating Dry Heat),
IEC 60068-2-14 (Test Na, Unpackaged Nonoperating Thermal Shock)
-4085 C (-40185 F)
Temperature, surrounding air, max 70 C (158 F)
Relative humidity
IEC 60068-2-30 (Test Db, Unpackaged Damp Heat)
595% noncondensing
Vibration
IEC 60068-2-6 (Test Fc, Operating)
2 g @ 10500 Hz
Shock, operating
IEC 60068-2-27 (Test Ea, Unpackaged Shock)
30 g
Shock, nonoperating
IEC 60068-2-27 (Test Ea, Unpackaged Shock)
50 g
Emissions
CISPR 11
Group 1, Class A
ESD immunity
IEC 61000-4-2
6 kV contact discharges
8 kV air discharges
Radiated RF immunity
IEC 61000-4-3
10V/m with 1 kHz sine-wave 80% AM from 802000 MHz
10V/m with 200 Hz 50% Pulse 100% AM @ 900 MHz
10V/m with 200 Hz 50% Pulse 100% AM @ 1890 MHz
3V/m with 1 kHz sine-wave 80% AM from 20002700 MHz
EFT/B immunity
IEC 61000-4-4
4 kV at 5 kHz on RS-232 port
Surge transient immunity
IEC 61000-4-5
2 kV line-earth (CM) on communication ports
Conducted RF immunity
IEC 61000-4-6
10V rms with 1 kHz sine-wave 80% AM from 150 kHz80 MHz
Table 13 - Certifications - 1756-L63XT Controller
Certification
(1)
(1) When marked. See the Product Certification link at http://www.ab.com for Declarations of Conformity, Certificates, and other certification details.
1756-L63XT
c-UL-us UL Listed Industrial Control Equipment, certified for US and Canada. See UL File E65584.
UL Listed for Class I, Division 2 Group A,B,C,D Hazardous Locations, certified for U.S. and Canada. See UL File E194810.
CE European Union 2004/108/EC EMC Directive, compliant with:
EN 61000-6-4; Industrial Emissions
EN 61326-1; Meas./Control/Lab., Industrial Requirements
EN 61000-6-2; Industrial Immunity
EN 61131-2; Programmable Controllers (Clause 8, Zone A & B)
C-Tick Australian Radio communications Act, compliant with: AS/NZS CISPR 11; Industrial Emissions
Ex European Union 94/9/EC ATEX Directive, compliant with:
EN 60079-15; Potentially Explosive Atmospheres, Protection n
EN 60079-0; General Requirements
II 3 G Ex nA IIC T4 X
KC Korean Registration of Broadcasting and Communications Equipment, compliant with:
Article 58-2 of Radio Waves Act, Clause 3
Rockwell Automation Publication 1756-TD001H-EN-P - December 2013 13
1756 ControlLogix Controllers
1756 GuardLogix Controllers
A GuardLogix controller is a ControlLogix controller that also provides safety control. The GuardLogix system is a dual
controller solutionyou must use a 1756-L6xS/1756-L7xS primary controller and a 1756-LSP/1756-L7SP safety partner
to achieve up to SIL CL 3/PLe/Cat. 4. A major benefit of this system is that its still a single project, safety and standard
together. The safety partner controller is a part of the system, is automatically configured, and requires no user setup.
During development, safety and standard have the same rules; multiple programmers, online editing, and forcing are all
allowed. Once the project is tested and ready for final validation, you set the safety task to a SIL 3 integrity level, which is
then enforced by the GuardLogix controller. When safety memory is locked and protected, the safety logic can't be
modified and all safety functions operate with SIL 3 CL integrity. On the standard side of the GuardLogix controller, all
functions operate like a regular Logix controller. Thus, online editing, forcing, and other activities are all allowed.
With this level of integration, safety memory can be read by standard logic and external devices, like HMIs or other
controllers, eliminating the need to condition safety memory for use elsewhere. The result is easy system-wide integration
and the ability to display safety status on displays or marquees. Use Guard I/O modules for field device connectivity on
Ethernet or DeviceNet networks, and for safety interlocking between GuardLogix controllers use Ethernet or ControlNet
networks. Multiple GuardLogix controllers can share safety data for zone to zone interlocking, or a single GuardLogix
controller can use remote distributed safety I/O between different cells/areas.
In addition to the standard features of a ControlLogix controller, the GuardLogix controller has these safety-related
features.
Table 14 - Features - GuardLogix Controllers
Feature 1756-L61S, 1756-L62S, 1756-L63S, 1756-L71S, 1756-L72S, 1756-L73S, 1756-L73SXT
Safety communication options Standard and safety
EtherNet/IP
ControlNet
DeviceNet
Network connections, per network module 100 ControlNet (1756-CN2/A)
40 ControlNet (1756-CNB/D, 1756-CNB/E)
128 ControlNet (1756-CN2/B)
256 EtherNet/IP; 128 TCP (1756-EN2x)
128 EtherNet/IP; 64 TCP (1756-ENBT)
Controller redundancy Not supported
Programming languages Relay ladder with safety application instructions
Primary Controller Safety Partner
1756-L61S, 1756-L62S, 1756-L63S 1756-LSP
1756-L71S, 1756-L72S, 1756-L73S 1756-L7SP
1756-L73SXT 1756-L7SPXT
14 Rockwell Automation Publication 1756-TD001H-EN-P - December 2013
1756 ControlLogix Controllers
1756-L7xS GuardLogix Controllers Specifications
Table 15 - Technical Specifications - 1756-L7xS GuardLogix Controllers
Attribute 1756-L71S 1756-L72S 1756-L73S 1756-L7SP
User memory 2 MB 4 MB 8 MB
Safety memory 1 MB 2 MB 4 MB
(2)
(2) Same as corresponding primary controller.
I/O memory 0.98 MB
Optional nonvolatile memory storage 1 GB (1756-SD1 ships with every controller)
2 GB (1756-SD2)

Digital I/O, max 128,000

Analog I/O, max 4000
Total I/O, max 128,000
Replacement battery
Energy storage modules 1756-ESMCAP capacitor energy storage module (removable, ships installed with every
controller)
1756-ESMNSE capacitor energy storage module (removable, no residual WallClockTime
power backup)
1756-ESMNRM capacitor energy storage module (nonremovable, secures controller by
preventing USB connection an d SD card use)
1756-SPESMNSE capacitor energy
storage module for the safety
partner (removable, no residual
WallClockTime power backup)
1756-SPESMNRM capacitor energy
storage module for the safety
partner (nonremovable, secures
controller by preventing USB
connection an d SD card use)
Current draw @ 1.2V DC 5 mA
Current draw @ 5.1V DC 800 mA
Power dissipation 2.5 W
Thermal dissipation 8.5 BTU/hr
Isolation voltage 30V (continuous), basic insulation, USB port to backplane, type tested at 500V AC for 60 s
Weight, approx 0.25 kg (0.55 lb)
Slot width 2, (both modules needed; each is one slot)
Module location Chassis-based, any slot (the safety partner must be installed in the slot to the immediate right of the primary controller)
Chassis 1756-A4, 1756-A7, 1756-A10, 1756-A13, 1756-A17
Power supply, standard 1756-PA72, 1756-PB72, 1756-PA75, 1756-PB75
Wire category
(1)
(1) Use this Conductor Category information for planning conductor routing. Refer to Industrial Wiring and Grounding Guidelines, publication 1770-4.1.
3 - on USB ports
North American temperature code T4A
IEC temperature code T4
Enclosure type rating None (open-style)
Rockwell Automation Publication 1756-TD001H-EN-P - December 2013 15
1756 ControlLogix Controllers
Table 16 - Environmental Specifications - 1756-L7xS GuardLogix Controllers
Attribute 1756-L71S, 1756-L72S, 1756-L73S, 1756-L7SP
Temperature, operating
IEC 60068-2-1 (Test Ad, Operating Cold),
IEC 60068-2-2 (Test Bd, Operating Dry Heat),
IEC 60068-2-14 (Test Nb, Operating Thermal Shock)
060 C (32140 F)
Temperature, nonoperating
IEC 60068-2-1 (Test Ab, Unpackaged Nonoperating Cold),
IEC 60068-2-2 (Test Bb, Unpackaged Nonoperating Dry Heat),
IEC 60068-2-14 (Test Na, Unpackaged Nonoperating Thermal Shock)
-4085 C (-40185 F)
Relative humidity
IEC 60068-2-30 (Test Db, Unpackaged Damp Heat)
595% noncondensing
Temperature, surrounding air, max 60 C (140 F)
Vibration
IEC 60068-2-6 (Test Fc, Operating)
2 g @ 10500 Hz
Shock, operating
IEC 60068-2-27 (Test Ea, Unpackaged Shock)
30 g
Shock, nonoperating
IEC 60068-2-27 (Test Ea, Unpackaged Shock)
50 g
(45 g with SD card installed)
Emissions
CISPR 11
IEC 61000-6-4
Class A
ESD immunity
IEC 61000-4-2
6 kV contact discharges
8 kV air discharges
Radiated RF immunity
IEC 61000-4-3
10V/m with 1 kHz sine-wave 80% AM from 802000 MHz
10V/m with 200 Hz 50% Pulse 100% AM @ 900 MHz
10V/m with 200 Hz 50% Pulse 100% AM @ 1890 MHz
3V/m with 1 kHz sine-wave 80% AM from 20002700 MHz
Table 17 - Certifications - 1756-L7xS GuardLogix Controllers
Certification
(1)
(1) When marked. See the Product Certification link at http://www.ab.com for Declarations of Conformity, Certificates, and other certification details.
1756-L71S, 1756-L72S, 1756-L73S, 1756-L7SP
c-UL-us UL Listed Industrial Control Equipment, certified for US and Canada. See UL File E65584.
UL Listed for Class I, Division 2 Group A,B,C,D Hazardous Locations, certified for U.S. and Canada. See UL File E194810.
CE European Union 2004/108/EC EMC Directive, compliant with:
EN 61000-6-4; Industrial Emissions
EN 61326-1; Meas./Control/Lab., Industrial Requirements
EN 61000-6-2; Industrial Immunity
EN 61131-2; Programmable Controllers (Clause 8, Zone A & B)
European Union 2006/42/EC MD, compliant with:
EN 60204-1; Electrical equipment of machines
EN ISO 13849-1; Safety-related parts of control systems
EN 62061; Functional safety of safety-related control systems
C-Tick Australian Radio communications Act, compliant with: AS/NZS CISPR 11; Industrial Emissions
Ex European Union 94/9/EC ATEX Directive, compliant with:
EN 60079-15; Potentially Explosive Atmospheres, Protection n
EN 60079-0; General Requirements
II 3 G Ex nA IIC T4 X
KC Korean Registration of Broadcasting and Communications Equipment, compliant with:
Article 58-2 of Radio Waves Act, Clause 3
TV certified for functional safety
(2)
(2) When used with specified firmware revisions.
Capable of SIL CL 3 according to IEC 61508, capable of Category 4 according to EN954-1, and capable of PL(e) according to ISO 13849-1
when used as described in the GuardLogix Controller Systems Safety Reference Manual, publication 1756-RM093.
16 Rockwell Automation Publication 1756-TD001H-EN-P - December 2013
1756 ControlLogix Controllers
1756-L6xS GuardLogix Controllers Specifications
Table 18 - Technical Specifications - 1756-L6xS GuardLogix Controllers
Attribute 1756-L61S 1756-L62S 1756-L63S 1756-LSP
User memory 2 MB 4 MB 8 MB
Safety memory 1 MB 1 MB 3.75 MB Same as corresponding primary
controller
I/O memory 478 KB
Optional nonvolatile memory storage 128 MB (1784-CF128)
(2)
1 GB (1784-SD1, ships with every controller)
2 GB (1784-SD2)
(2) RSLogix 5000 programming software, version 18 or later.

Digital I/O, max 128,000

Analog I/O, max 4000

Total I/O, max 128,000
Replacement battery 1756-BA2 (0.50 g lithium)
Energy storage modules
Current draw @ 1.2V DC
Current draw @ 5.1V DC 1200 mA
Current draw @ 24V DC 14 mA
Power dissipation 3.5 W
Thermal dissipation 11.9 BTU/hr
Isolation voltage 30V (continuous), Basic Insulation Type, RS-232 to system
Type tested at 720V DC for 60 s
Serial cables 1756-CP3 or 1747-CP3, right angle connector to controller, straight to serial port, 3 m (9.84 ft)
Weight, approx 0.32 kg
(0.70 lb)
Slot width 2, (both modules needed; each is one slot)
Module location Chassis-based, any slot (the safety partner must be installed in the slot to the immediate right of the primary controller)
Chassis 1756-A4, 1756-A7, 1756-A10, 1756-A13, 1756-A17
Power supply standard 1756-PA72, 1756-PA75, 1756-PB72, 1756-PB75
Wire category
(1)
(1) Use this conductor category information for planning conductor routing as described in the system level installation manual. See the Industrial Automation Wiring and Grounding Guidelines,
publication 1770-4.1.
2 - on RS-232 port
North American temperature code T4A
Enclosure type rating None (open-style)
Rockwell Automation Publication 1756-TD001H-EN-P - December 2013 17
1756 ControlLogix Controllers
Table 19 - Environmental Specifications - 1756-L6xS GuardLogix Controllers
Attribute 1756-L61S, 1756-L62S, 1756-L63S, 1756-LSP
Temperature, operating
IEC 60068-2-1 (Test Ad, Operating Cold),
IEC 60068-2-2 (Test Bd, Operating Dry Heat),
IEC 60068-2-14 (Test Nb, Operating Thermal Shock)
060 C (32140 F) on 1756-L61S, 1756-L62S, 1756-L63S, 1756-LSP
Temperature, storage
IEC 60068-2-1 (Test Ab, Unpackaged Nonoperating Cold),
IEC 60068-2-2 (Test Bb, Unpackaged Nonoperating Dry Heat),
IEC 60068-2-14 (Test Na, Unpackaged Nonoperating Thermal Shock)
-4085 C (-40185 F)
Temperature, surrounding air, max 60 C (140 F)
Relative humidity
IEC 60068-2-30 (Test Db, Unpackaged Damp Heat)
595% noncondensing
Vibration
IEC 60068-2-6 (Test Fc, Operating)
2 g @ 10500 Hz
Shock, operating
IEC 60068-2-27 (Test Ea, Unpackaged Shock)
30 g
Shock, nonoperating
IEC 60068-2-27 (Test Ea, Unpackaged Shock)
50 g
Emissions
CISPR 11
IEC 61000-6-4
Class A
ESD immunity
IEC 61000-4-2
6 kV contact discharges
8 kV air discharges
Radiated RF immunity
IEC 61000-4-3
10V/m with 1 kHz sine-wave 80% AM from 802000 MHz
10V/m with 200 Hz 50% Pulse 100% AM @ 900 MHz
10V/m with 200 Hz 50% Pulse 100% AM @ 1890 MHz
3V/m with 1 kHz sine-wave 80% AM from 20002700 MHz
EFT/B immunity
IEC 61000-4-4
4 kV at 5 kHz on RS-232 port
Surge transient immunity
IEC 61000-4-5
2 kV line-earth (CM) on RS-232 port
Conducted RF immunity
IEC 61000-4-6
10V rms with 1 kHz sine-wave 80% AM from 150 kHz80 MHz
18 Rockwell Automation Publication 1756-TD001H-EN-P - December 2013
1756 ControlLogix Controllers
Table 20 - Certifications - 1756-L6xS GuardLogix Controllers
Certification
(1)
(1) When marked. See the Product Certification link at http://www.ab.com for Declarations of Conformity, Certificates, and other certification details.
1756-L61S, 1756-L62S, 1756-L63S, 1756-LSP
c-UL-us UL Listed Industrial Control Equipment, certified for US and Canada. See UL File E65584.
UL Listed for Class I, Division 2 Group A,B,C,D Hazardous Locations, certified for U.S. and Canada. See UL File E194810.
CSA CSA Certified Process Control Equipment. See CSA File LR54689C.
CSA Certified Process Control Equipment for Class I, Division 2 Group A,B,C,D Hazardous Locations. See CSA File
LR69960C.
CE European Union 2004/108/EC EMC Directive, compliant with:
EN 61000-6-4; Industrial Emissions
EN 61326-1; Meas./Control/Lab., Industrial Requirements
EN 61000-6-2; Industrial Immunity
EN 61131-2; Programmable Controllers (Clause 8, Zone A & B)
European Union 2006/42/EC MD, compliant with:
EN 60204-1; Electrical equipment of machines
EN ISO 13849-1; Safety-related parts of control systems
EN 62061; Functional safety of safety-related control systems
C-Tick Australian Radio communications Act, compliant with: AS/NZS CISPR 11; Industrial Emissions
FM FM Approved Equipment for use in Class I, Division 2 Group A, B, C, D Hazardous Locations
KC Korean Registration of Broadcasting and Communication Equipment, compliant with:
Article 58-2 of Radio Waves Act, Clause 3
TV certified for functional safety
(2)
(2) When used with specified firmware revision.
Capable of Cat. 4/PL e according to EN ISO 13849-1 and SIL 3 according to EN 62061/IEC 61508 when used as described
in the GuardLogix Controller Systems Safety Reference Manual, publication 1756-RM093.
UL certified for functional safety
(2)
Capable of SIL CL 3, see UL File E256621.
Rockwell Automation Publication 1756-TD001H-EN-P - December 2013 19
1756 ControlLogix Controllers
1756 GuardLogix-XT Controllers
The GuardLogix-XT controllers function the same way as the traditional GuardLogix controllers. The GuardLogix-XT
controllers are conformally coated for extended protection in harsh, corrosive environments. The GuardLogix-XT system
can withstand temperature ranges from -2570 C (-13158 F). You must use a 1756-L73SXT primary controller with a
1756-L7SPXT safety partner.
Equipment designated as LXT is certified for use only within a surrounding air temperature of -2560 C (-13140 F)
even when used with other XT equipment.
Attribute 1756-L73SXT 1756-L7SPXT
User memory 8 MB
Safety memory 4 MB Same as corresponding primary controller
I/O memory 0.98 MB
Digital I/O, max 128,000
Analog I/O, max 4,000
Total I/O, max 128,000
Energy storage modules 1756-ESMCAPXT capacitor energy storage module
extreme temperature (removable, ships installed with
every controller)
1756-ESMNSEXT capacitor energy storage module
extreme temperature (removable, no residual
WallClockTime power backup)
1756-ESMNRMXT capacitor energy storage module
extreme temperature (nonremovable, secures controller
by preventing USB connection an d SD card use)
1756-SPESMNSEXT capacitor energy storage module
for the safety partner extreme temperature
(removable, no residual WallClockTime power backup)
1756-SPESMNRMXT capacitor energy storage module
for the safety partner extreme temperature
(nonremovable, secures controller by preventing USB
connection an d SD card use)
Current draw @ 1.2V DC 5 mA
Current draw @ 5.1V DC 800 mA
Power dissipation 2.5 W
Thermal dissipation 8.5 BTU/hr
Isolation voltage 30V (continuous), Basic Insulation, USB port to backplane
Type tested at 500V AC for 60 s
Weight, approx 0.25 kg (0.55lb)
Slot width 2 (need 2 modules; each uses a slot)
Module location Chassis-based, any slot (the safety partner must be in a slot to the right of the primary)
Chassis 1756-A4LXT, 1756-A5XT, 1756-A7LXT, 1756-A7XT
Power supply 1756-PAXT, 1756-PBXT
Wire category
(1)
(1) Use this conductor category information for planning conductor routing as described in the system level installation manual. See the Industrial Automation Wiring and Grounding Guidelines,
publication 1770-4.1.
3 - on USB ports
North American temperature code T4A
IEC temperature code T4
Enclosure type rating None (open-style)
20 Rockwell Automation Publication 1756-TD001H-EN-P - December 2013
1756 ControlLogix Controllers
Table 21 - Environmental Specifications - 1756 GuardLogix-XT Controllers
Attribute 1756-L73SXT, 1756-L7SPXT
Temperature, operating
IEC 60068-2-1 (Test Ad, Operating Cold),
IEC 60068-2-2 (Test Bd, Operating Dry Heat),
IEC 60068-2-14 (Test Nb, Operating Thermal Shock)
-2570 C (-13158 F)
When using a 1756-A7LXT chassis, surrounding air temperature range is -2560 C (-13140 F)
even when using an XT controller
Temperature, storage
IEC 60068-2-1 (Test Ab, Unpackaged Nonoperating Cold),
IEC 60068-2-2 (Test Bb, Unpackaged Nonoperating Dry Heat),
IEC 60068-2-14 (Test Na, Unpackaged Nonoperating Thermal Shock)
-4085 C (-40185 F)
Temperature, surrounding air, max 70 C (158 F)
Relative humidity
IEC 60068-2-30 (Test Db, Unpackaged Damp Heat)
595% noncondensing
Vibration
IEC 60068-2-6 (Test Fc, Operating)
2 g @ 10500 Hz
Shock, operating
IEC 60068-2-27 (Test Ea, Unpackaged Shock)
30 g
Shock, nonoperating
IEC 60068-2-27 (Test Ea, Unpackaged Shock)
50 g (45 g with SD card installed)
Emissions
CISPR 11
IEC 61000-6-4
Class A
ESD immunity
IEC 61000-4-2
6 kV contact discharges
8 kV air discharges
Radiated RF immunity
IEC 61000-4-3
10V/m with 1 kHz sine-wave 80% AM from 802000 MHz
10V/m with 200 Hz 50% Pulse 100% AM @ 900 MHz
10V/m with 200 Hz 50% Pulse 100% AM @ 1890 MHz
3V/m with 1 kHz sine-wave 80% AM from 20002700 MHz
Table 22 - Certifications - 1756 GuardLogix-XT Controllers
Certification
(1)
(1) When marked. See the Product Certification link at http://www.ab.com for Declarations of Conformity, Certificates, and other certification details.
1756-L73SXT, 1756-L7SPXT
c-UL-us UL Listed Industrial Control Equipment, certified for US and Canada. See UL File E65584.
UL Listed for Class I, Division 2 Group A,B,C,D Hazardous Locations, certified for U.S. and Canada. See UL File E194810.
CE European Union 2004/108/EC EMC Directive, compliant with:
EN 61000-6-4; Industrial Emissions
EN 61326-1; Meas./Control/Lab., Industrial Requirements
EN 61000-6-2; Industrial Immunity
EN 61131-2; Programmable Controllers (Clause 8, Zone A & B)
European Union 2006/42/EC MD, compliant with:
EN 60204-1; Electrical equipment of machines
EN ISO 13849-1; Safety-related parts of control systems
EN 62061; Functional safety of safety-related control systems
C-Tick Australian Radio communications Act, compliant with: AS/NZS CISPR 11; Industrial Emissions
Ex European Union 94/9/EC ATEX Directive, compliant with:
EN 60079-15; Potentially Explosive Atmospheres, Protection n
EN 60079-0; General Requirements
II 3 G Ex nA IIC T4 X
KC Korean Registration of Broadcasting and Communications Equipment, compliant with:
Article 58-2 of Radio Waves Act, Clause 3
TV certified for functional safety
(2)
(2) When used with specified firmware revision.
Capable of SIL CL 3 according to IEC 61508, capable of Category 4 according to EN954-1, and capable of PL(e) according to ISO
13849-1 when used as described in the GuardLogix Controller Systems Safety Reference Manual, publication 1756-RM093.
Rockwell Automation Publication 1756-TD001H-EN-P - December 2013 21
1756 ControlLogix Controllers
1756 Armor GuardLogix Controller
The Armor GuardLogix controller extends the ControlLogix platform to the On-Machine space, putting industrial
control closer to the application and sometimes onto the machine itself. This safety controller provides 4 MB of memory
and two independent Ethernet ports to connect to an EtherNet/IP network.
This safety controller supports the full temperature range as ControlLogix controllers, while offering global certifications
and ratings for IP67 dust and washdown protection. It is certified for use in safety applications up to and including Safety
Integrity Level (SIL) 3 and Performance Level (e) in which the de-energized state is the safe state.
With so many hardware functions in a single device, the Armor GuardLogix controller minimizes cabinet hardware,
simplifies wiring layouts, does not require tools or specialty personnel for component replacement, improves Mean Time to
Repair (MTTR), simplifies troubleshooting, and makes system status readily available without the need to open a cabinet
or visit a control room.
The Armor GuardLogix controller provides memory capacity for the most demanding applications and provides resiliency
from loss of one network connection and allowing replacement of devices without stopping production. Similar to the
1756-L72S GuardLogix controller, this controller offers the standard features of a ControlLogix controller and safety
features.
Table 23 - Features - Armor GuardLogix Controller
Feature 1756-L72EROMS
Safety communication options Standard and safety on EtherNet/IP networks
Network connections, 256 EtherNet/IP; 128 TCP
Controller redundancy Not supported
Programming languages Relay ladder with safety application instructions
22 Rockwell Automation Publication 1756-TD001H-EN-P - December 2013
1756 ControlLogix Controllers
1756-L72EROMS GuardLogix Controller Specifications
Table 24 - Technical Specifications - 1756-L72EROMS Armor GuardLogix Controller
Attribute 1756-L72EROMS
User memory 4 MB
Safety memory 2 MB
I/O memory 0.98 MB
Optional nonvolatile memory storage 1 GB (1756-SD1 ships with every controller)
2 GB (1756-SD2)
Digital I/O, max 128,000
Analog I/O, max 4000
Total I/O, max 128,000
Input voltage range 1832V DC
Input voltage, nom 24V DC
Input system power, pins 2 and 3
1832V DC @ 8 A
Input pass through power, pins 1 and 4
Output external power, pins 2 and 3 1832V DC @ 6 A
Output pass through power, pins 1 and 4 1832V DC @ 8 A
Fusing Non-replaceable fuse is soldered in place
(3)
(3) This fuse is intended to guard against fire hazard due to short circuit conditions.
Isolation voltage 30V (continuous), Basic Insulation Type, Power to enclosure, Ethernet channels to Power, and non-redundant EtherNet channels
to non-redundant EtherNet channels.
No isolation between redundant Ethernet channels
Type tested at 707V DC for 60 s
Weight, approx 6.5 kg (14.3 lb)
Dimensions 240.0 x 292.0 x 164.52 mm (9.4 x 11.5 x 6.5 in.)
Ethernet port 1 Ethernet RJ45 Category 5
Ethernet cable 802.3 compliant shielded or unshielded twisted pair
USB port
(1)
(1) The USB port is intended for temporary local programming purposes only and not intended for permanent connection.
USB 1.1, full speed (12 Mbps)
Wire category
(2)
(2) Use this Conductor Category information for planning conductor routing. Refer to Industrial Wiring and Grounding Guidelines, publication 1770-4.1.
2 - on power ports
2 - on Ethernet ports
Enclosure type rating Meets IP67 and Nema Type 1
Rockwell Automation Publication 1756-TD001H-EN-P - December 2013 23
1756 ControlLogix Controllers
Table 25 - Environmental Specifications - 1756-L72EROMS Armor GuardLogix Controller
Attribute 1756-L72EROMS
Temperature, operating
IEC 60068-2-1 (Test Ad, Operating Cold),
IEC 60068-2-2 (Test Bd, Operating Dry Heat),
IEC 60068-2-14 (Test Nb, Operating Thermal Shock)
060 C (32140 F)
Temperature, nonoperating
IEC 60068-2-1 (Test Ab, Unpackaged Nonoperating Cold),
IEC 60068-2-2 (Test Bb, Unpackaged Nonoperating Dry Heat),
IEC 60068-2-14 (Test Na, Unpackaged Nonoperating Thermal Shock)
-4085 C (-40185 F)
Relative humidity
IEC 60068-2-30 (Test Db, Unpackaged Damp Heat)
595% noncondensing
Temperature, ambient, max 60 C (140 F)
Vibration
IEC 60068-2-6 (Test Fc, Operating)
2 g @ 10500 Hz
Shock, operating
IEC 60068-2-27 (Test Ea, Unpackaged Shock)
30 g
Shock, nonoperating
IEC 60068-2-27 (Test Ea, Unpackaged Shock)
30 g
Emissions
CISPR 11
IEC 61000-6-4
Class A
ESD immunity
IEC 61000-4-2
6 kV contact discharges
8 kV air discharges
Radiated RF immunity
IEC 61000-4-3
10V/m with 1 kHz sine-wave 80% AM from 802000 MHz
10V/m with 200 Hz 50% Pulse 100% AM @ 900 MHz
10V/m with 200 Hz 50% Pulse 100% AM @ 1890 MHz
3V/m with 1 kHz sine-wave 80% AM from 20002700 MHz
EFT/B immunity
IEC 61000-4-4
3 kV at 5 kHz on power ports
3 kV at 5 kHz on Ethernet ports
Surge transient immunity
IEC 61000-4-5
1 kV line-line (DM) and 2 kV line-earth (CM) on signal ports
2 kV line-earth (CM) on Ethernet ports
Conducted RF immunity
IEC 61000-4-6
10V rms with 1 kHz sine-wave 80% AM from 150 kHz80 MHz
Voltage variation
IEC 61000-4-29
10 ms interruption on DC supply ports
24 Rockwell Automation Publication 1756-TD001H-EN-P - December 2013
1756 ControlLogix Controllers
Controller Memory Use
The following equations provide a rough memory estimate.
For redundant controller systems, double the memory estimate you calculate. For example, if you estimate you need 2 MB
of memory, select a controller with 4 MB of memory.
Reserve 2030% of the controller memory to accommodate growth.
Table 26 - Certifications - 1756-L72EROMS Armor GuardLogix Controller
Certification
(1)
(1) When marked. See the Product Certification link at http://www.ab.com for Declarations of Conformity, Certificates, and other certification details.
1756-L72EROMS
c-UL-us UL Listed Industrial Control Equipment, certified for US and Canada. See UL File E65584.
CE European Union 2004/108/EC EMC Directive, compliant with:
EN 61326-1; Meas./Control/Lab., Industrial Requirements
EN 61000-6-2; Industrial Immunity
EN 61000-6-4; Industrial Emissions
EN 61131-2; Programmable Controllers (Clause 8, Zone A & B)
European Union 2006/42/EC MD, compliant with:
EN 60204-1; Electrical equipment of machines
EN ISO 13849-1; Safety-related parts of control systems
EN 62061; Functional safety of safety-related control systems
RCM Australian Radiocommunications Act, compliant with:
EN 61000-6-4; Industrial Emissions
KC Korean Registration of Broadcasting and Communications Equipment, compliant with:
Article 58-2 of Radio Waves Act, Clause 3
TV certified for functional safety
(2)
(2) When used with specified firmware revisions.
Capable of Cat. 4/PL e according to EN ISO 13849-1 and SIL 3 according to EN 62061/IEC 61508 when used as described in the
GuardLogix Controller Systems Safety Reference Manual, publication 1756-RM099.
Controller tasks _____ x 4000 = _____ bytes (minimum 1 task)
Digital I/O points _____ x 400 = _____ bytes
Analog I/O points _____ x 2600 = _____ bytes
DeviceNet modules
(1)
(1) The first DeviceNet module is 7400 bytes. Additional DeviceNet modules are 5800 bytes each.
_____ x 7400 = _____ bytes
Other communication modules
(2)
(2) Count all the communication modules in the system, not just those in the local chassis. This includes device connection modules, adapter modules, and ports on
PanelView terminals.
_____ x 2000 = _____ bytes
Motion axis _____ x 8000 = _____ bytes
FactoryTalk alarm instruction _____ x 1000 = _____ bytes (per alarm)
FactoryTalk subscriber _____ x 10,000 = _____ bytes
Rockwell Automation Publication 1756-TD001H-EN-P - December 2013 25
1756 ControlLogix Controllers
Controller Compatibility
The following tables provide compatibility with I/O modules, display devices, and other controllers and communication
devices.
Control Distributed I/O Modules
The controller can control these distributed I/O modules via the I/O Configuration tree in the programming software.
Control Safety I/O Modules
The GuardLogix controller can control these safety I/O modules in a safety system.
Table 27 - Distributed I/O Modules
I/O Modules EtherNet/IP ControlNet DeviceNet Remote I/O
Chassis-based I/O
1715 Redundant I/O Yes No No Yes
1746 SLC I/O No No No Yes
1756 ControlLogix I/O Yes Yes No No
1769 Compact I/O No No Yes Yes
(1)

(1) With a third-party module.
1771 Universal I/O No Yes No Yes
In-cabinet I/O
1734 POINT I/O Yes Yes Yes No
1734D POINTBlock I/O No No Yes No
1790, 1790D, 1790P CompactBlock LDX I/O No No Yes No
1791D, 1791P, 1791R CompactBlock I/O No No Yes No
1794 FLEX I/O Yes Yes Yes Yes
1797 FLEX Ex I/O No Yes No No
On-Machine I/O
1732 ArmorBlock I/O Yes No Yes No
1738 ArmorPOINT I/O Yes Yes Yes No
1792D ArmorBlock MaXum I/O No No Yes No
1799 Embedded I/O No No Yes No
I/O Modules EtherNet/IP ControlNet DeviceNet
In-cabinet I/O
1791DS CompactBlock Guard I/O No No Yes
1791ES CompactBlock Guard I/O Yes No No
1734 POINT Guard I/O Yes No No
On-Machine I/O
1732DS ArmorBlock Guard I/O No No Yes
26 Rockwell Automation Publication 1756-TD001H-EN-P - December 2013
1756 ControlLogix Controllers
Communicate with Display Devices
The controller can communicate with these display devices.
Communicate with Other Controllers
The controller can communicate with these programmable controllers.
Display Devices EtherNet/IP ControlNet DeviceNet DH+ Remote I/O RS-232 (DF1)
Industrial Computers
Rockwell Automation industrial computers (all)
(1)
(1) Includes Rockwell Automation integrated display rotating media (HDD) and solid state (SSD) computers, Rockwell Automation non-display computers, and Rockwell Automation integrated display
computers with keypad.
Yes Yes Yes Yes Yes Yes
Graphic Terminals
PanelView Plus and PanelView e terminals Yes Yes Yes Yes Yes Yes
PanelView Standard terminals Yes Yes Yes Yes Yes Yes
PanelView e terminals No Yes No Yes Yes No
Message Displays
InView message displays Yes Yes Yes Yes Yes Yes
Controller EtherNet/IP ControlNet DeviceNet DH+ RS-232 (DF1) DH-485
(5)
(5) The 1756-DH485 module supports full DH-485 functionality.
1756 ControlLogix
1756 GuardLogix
Yes Yes Yes Yes Yes Yes
1768, 1769 CompactLogix
1768 Compact GuardLogix
Yes Yes Yes No Yes Yes
1789 SoftLogix 5800 Yes Yes Yes No Yes No
1794 FlexLogix Yes Yes Yes No Yes Yes
PowerFlex with DriveLogix Yes Yes Yes No Yes Yes
1785 PLC-5
(1)

(2)(3)

(1) The Ethernet PLC-5 controller must be series C, firmware revision N.1 or later; series D, firmware revision E.1 or later; or series E, firmware revision D.1 or later.
(2) The 1785-ENET Ethernet communication interface module must be series A, firmware revision D or later.
(3) The PLC-5, SLC, and MicroLogix processors appear as I/O points to the Logix controller. Use the appropriate DeviceNet interface for the controller.
Yes Yes Yes Yes Yes No
1747 SLC
(4)(4)

(4) Use a 1747-L55x controller with OS501 or later.
Yes Yes Yes
)
Yes Yes Yes
1761 MicroLogix
(4)
Yes No Yes No Yes Yes
1762 MicroLogix
(4)
Yes No Yes No Yes Yes
1763 MicroLogix
(4)
Yes No Yes No Yes Yes
1764 MicroLogix
(4)
Yes No Yes No Yes Yes
1772 PLC-2 No No No Yes Yes No
1775 PLC-3 No No No Yes Yes No
5250 PLC-5/250 No No No Yes Yes No
Rockwell Automation Publication 1756-TD001H-EN-P - December 2013 27
1756 ControlLogix Controllers
Communicate with Other Communication Devices
The controller can communicate with these communication devices.
ControlLogix Redundancy
The ControlLogix controller supports controller redundancy. In a redundant controller system, you need these
components:
Two 1756 chassis, each with the same of the following:
Number of slots
Compatible modules in the same slots
Redundancy firmware revisions in each module
Two additional ControlNet nodes outside the redundant chassis pair if the application uses ControlNet networks
One 1756-RM, 1756-RM2, 1756-RMXT, or 1756-RM2XT redundancy module per chassis that is connected by a
1756-RMCx cable (the 1756-RM2 redundancy modules cannot be paired with the 1756-RM redundancy modules)
Up to two 1756-L6x or 1756-L7x controllers, or a combination of the two, in each chassis
Up to seven enhanced or standard (not mixed) communication modules, that is, 1756-CN2/B, 1756-CN2R/B,
1756-CN2RXT modules 1756-EN2T, 1756-EN2TR, or 1756-EN2TXT modules
Communication Device EtherNet/IP ControlNet DeviceNet DH+
Linking device (ControlLogix controllers only) 1788-EN2DN 1788-CN2DN
1788-CN2FF
1788-EN2DN
1788-CN2DN

PCMCIA card 1784-PCC 1784-PCD 1784-PCMK
PCI card 1784-PCIC
1784-PCICS
1784-PCID
1784-PCIDS
1784-CPCIDS

Drives SCANport module
(1)
(1) Use a CIP generic MSG instruction to communicate with the 1203-FM1 SCANport module on a DIN rail that is remote to the controller. The remote DIN rail also requires a 1794-ACN15 or 1794-ACNR15
ControlNet adapter module.
1203-FM1
1203-FB1

Communication module
(2)
(2) Use the generic module configuration to configure the 1203-CN1 module and a CIP generic MSG instruction to communicate with the module.
1203-CN
1770-KFC15
1770-KFCD15
1747-KFC15
1770-KFD
1770-KFG
1770-KF2
Communication card 1784-PKTCS
1784-KTCS
1784-KTCX15
1784-PKTX
1784-PKTXD

USB communication device 1784-U2CN 1784-U2DN 1784-U2DHP
28 Rockwell Automation Publication 1756-TD001H-EN-P - December 2013
1756 ControlLogix Controllers
Table 28 - Technical Specifications - 1756 Redundancy Modules
Attribute 1756-RM 1756-RM2 1756-RMXT 1756-RM2XT
Current draw @ 1.2V DC 4 mA 4 mA
Current draw @ 5.1V DC 1.2 A 1.16A 1.2 A 1.16A
Current draw @ 24V DC 120 mA 3.4 mA 120 mA 3.4 mA
Power dissipation 9.0 W 6 W, max 9.0 W 6 W, max
Thermal dissipation 31 BTU/hr 21 BTU/hr 31 BTU/hr 21 BTU/hr
Connector cables 1756-RMC1, 1 m (3.28 ft)
1756-RMC3, 3 m (9.84 ft)
1756-RMC10, 10 m (32.81 ft)
Slot width 1 slot
Module location Chassis-based, any slot
Chassis 1756-A4, 1756-A7, 1756-A10, 1756-A13, 1756-A17 1756-A7XT, 1756-A4LXT, 1756-A5LXT, 1756-A7LXT
Power supply, standard 1756-PA72, 1756-PA75, 1756-PB72, 1756-PB75 1756-PAXT, 1756-PBXT
Power supply, redundant 1756-PA75R, 1756-PB75R, 1756-PSCA2 None
North American temperature code T4
IEC temperature code T4
Enclosure type None (open-style)
Weight, approx 0.29 kg (0.64 lb)
Mounting ControlLogix-XT chassis, single-slot module
Table 29 - Environmental Specifications - 1756 Redundancy Module
Attribute 1756-RM 1756-RM2 1756-RMXT 1756-RM2XT
Temperature, operating
IEC 60068-2-1 (Test Ad, Operating Cold),
IEC 60068-2-2 (Test Bd, Operating Dry Heat),
IEC 60068-2-14 (Test Nb, Operating Thermal Shock)
060 C (32140 F) -2570 C (-13158 F)
When using a 1756-A7LXT
chassis, surrounding air
temperature range is
-2560 C (-13140 F)
even when using an XT
redundancy module.
-2570 C (-13158 F)
Temperature, storage
IEC 60068-2-1 (Test Ab, Unpackaged Nonoperating Cold),
IEC 60068-2-2 (Test Bb, Unpackaged Nonoperating Dry
Heat),
IEC 60068-2-14 (Test Na, Unpackaged Nonoperating
Thermal Shock)
-4085 C (-40185 F)
Temperature, surrounding air, max 60 C (140 F) 70 C (158 F)
Relative humidity
IEC 60068-2-30 (Test Db, Unpackaged Damp Heat)
595% noncondensing
Vibration
IEC 60068-2-6 (Test Fc, Operating)
2 g @ 10500 Hz
Shock, operating
IEC 60068-2-27 (Test Ea, Unpackaged Shock)
30 g
Shock, nonoperating
IEC 60068-2-27 (Test Ea, Unpackaged Shock)
50 g
Rockwell Automation Publication 1756-TD001H-EN-P - December 2013 29
1756 ControlLogix Controllers
Emissions
CISPR 11
IEC 61000-6-4
Group 1, Class A Class A Group 1, Class A Class A
ESD immunity
IEC 61000-4-2
6 kV contact discharges
8 kV air discharges
Radiated RF immunity
IEC 61000-4-3
10V/m with 1 kHz sine-wave 80% AM from 802000 MHz
10V/m with 200 Hz 50% Pulse 100% AM @ 900 MHz
10V/m with 200 Hz 50% Pulse 100% AM @ 1890 MHz
3V/m with 1 kHz sine-wave 80% AM from 20002700 MHz
Table 30 - Certifications - 1756 Redundancy Module
Certification
(1)
1756-RM 1756-RMXT 1756-RM2 1756-RM2XT
CSA CSA Certified Process Control
Equipment. See CSA File
LR54689C.
CSA Certified Process Control
Equipment for Class I,
Division 2 Group A,B,C,D
Hazardous Locations. See
CSA File LR69960C.
CSA Certified Process
Control Equipment. See CSA
File LR54689C.
CSA Certified Process
Control Equipment for Class
I, Division 2 Group A,B,C,D
Hazardous Locations. See
CSA File LR69960C.

CE European Union 2004/108/IEC EMC Directive, compliant with:

EN 61326-1; Meas./Control/Lab., Industrial Requirements
EN 61000-6-2; Industrial Immunity
EN 61000-6-4; Industrial Emissions
EN 61131-2; Programmable Controllers (Clause 8, Zone A & B)
C-Tick Australian Radio communications Act, compliant with:
AS/NZS CISPR 11; Industrial Emissions
c-UL-us UL Listed Industrial Control Equipment, certified for U.S. and Canada. See UL file E65584.
UL Listed for Class I, Division 2 Group A,B,C,D Hazardous Locations, certified for U.S. and Canada. See UL File E194810.
Ex European Union 94/9/EC ATEX Directive, compliant with:
EN 60079-15; Potentially Explosive Atmospheres, Protection n
EN 60079-0; General Requirements
II 3 G Ex nA IIC T4 X Gc
FM FM Approved Equipment for
use in Class I Division 2 Group
A,B,C,D Hazardous Locations
FM Approved Equipment for
use in Class I Division 2
Group A,B,C,D Hazardous
Locations

KC Korean Registration of Broadcasting and Communications Equipment, compliant with:

Article 58-2 of Radio Waves Act, Clause 3
(1) When marked. See the Product Certification link at http://www.ab.com for Declarations of Conformity, Certificates, and other certification details.
Table 29 - Environmental Specifications - 1756 Redundancy Module (continued)
Attribute 1756-RM 1756-RM2 1756-RMXT 1756-RM2XT
30 Rockwell Automation Publication 1756-TD001H-EN-P - December 2013
1756 ControlLogix Controllers
ControlLogix Connections
A ControlLogix system uses connections to establish communication links between devices. The types of connections
include the following:
Controller-to-local I/O modules or local communication modules
Controller-to-remote I/O or remote communication modules
Controller-to-remote I/O (rack-optimized) modules
Produced and consumed tags
Messages
Access via the controller programming software
Access via RSLinx software for HMI or other applications
You indirectly determine the number of connections the controller uses by configuring the controller to communicate with
other devices in the system. The limit of connections may ultimately reside in the communication module you use for the
connection. If a message path routes through a communication module, the connection related to the message also counts
towards the connection limit of that communication module.
The 1756-L6x and 1756-L6xS controllers support 250 connections; the 1756-L7x and 1756-L7xS controllers support 500.
To calculate the total connections for a controller, consider the connections to local I/O modules and the connections to
remote modules. Use this table to figure local connections.
Table 31 - Figure Local Connections
Connection Type Device Quantity Connections per Device Total Connections
Local I/O module (always a direct connection) 1
1756-M16SE, 1756-M08SE, 1756-M03SE SERCOS motion module
1756-M02AE, 1756-M02AS, 1756-HYD02 analog motion module
3
1756-CN2, 1756-CN2R communication module
1756-CNB, 1756-CNBR communication module
1756-CN2RXT communication module
0
1756-EN2F, 1756-EN2T communication module
1756-ENBT, 1756-EWEB communication module
1756-EN2TXT communication module
0
1756-DNB communication module 2
1756-DHRIO communication module
1756-RIO communication module
1756-DHRIOXT communication module
1
1756-DH485 communication module 1
Total
Rockwell Automation Publication 1756-TD001H-EN-P - December 2013 31
1756 ControlLogix Controllers
Regardless of how you configure local I/O modules (rack-optimized or direct connect), the controller establishes a direct
connection for each local I/O module. Remote connections depend on the communication module. The number of
connections the module supports determines how many connections the controller can access through that module. Use
this table to figure remote connections for the controller.
ControlLogix Controller Accessories
You can use the following accessories with ControlLogix controllers.
Memory Cards
Memory cards offer nonvolatile memory to permanently store a user program and tag data on a controller. The 1756-L7x
ControlLogix controller comes with the 1784-SD1 Secure Digital (SD) card already installed in every controller. The
1756-L6x controllers support optional CompactFlash cards purchased separately. The memory cards are installed in a
socket on the controller. Through the programming software, you can manually trigger the controller to save to, or load
from, nonvolatile memory or configure the controller to load from nonvolatile memory on powerup.
Table 32 - Figure Remote Connections
Connection Type Device Quantity Connections per Device Total Connections
Remote ControlNet communication module
Configured as a direct connection
Configured as a rack-optimized connection
0
1
Remote I/O module over a ControlNet network (direct connection) 1
Remote Ethernet communication module
Configured as a direct connection
Configured as a rack-optimized connection
0
1
Remote I/O module over an EtherNet/IP network (direct connection) 1
Remote device over a DeviceNet network
(accounted for in rack-optimized connection for local 1756-DNB module)
0
Other remote communication adapter 1
Safety input module 1
Safety output module 2
Produced tag
Each consumer
1
1
Consumed tag 1
Connected message 1
Block-transfer message 1
Total
Table 33 - Technical Specifications - 1784 Memory Cards
Attribute 1784-CF128 1784-SD1 1784-SD2
Memory 128 MB 1 GB 2 GB
Supported controllers 1756-L6x, 1756-L6xS
(1)
1756-L7x, 1756-L7xS
Weight, approx 14.20 g (0.50 oz) 1.76 g (0.06 oz)
32 Rockwell Automation Publication 1756-TD001H-EN-P - December 2013
1756 ControlLogix Controllers
(1) For safety controllers using RSLogix 5000 programming software version 18 or later.
Table 34 - Environmental Specifications - 1784 Memory Cards
Attribute 1784-CF128 1784-SD1, 1784-SD2
Temperature, operating
IEC 60068-2-1 (Test Ad, Operating Cold),
IEC 60068-2-2 (Test Bd, Operating Dry Heat),
IEC 60068-2-14 (Test Nb, Operating Thermal Shock)
-2570 C (-13158 F)
Temperature, storage
IEC 60068-2-1 (Test Ab, Unpackaged Nonoperating Cold),
IEC 60068-2-2 (Test Bb, Unpackaged Nonoperating Dry Heat),
IEC 60068-2-14 (Test Na, Unpackaged Nonoperating Thermal Shock)
-4085 C (-40185 F)
Relative humidity
IEC 60068-2-30 (Test Db, Unpackaged Damp Heat)
595% noncondensing
Vibration
IEC 60068-2-6 (Test Fc, Operating)
2 g @ 10500 Hz
Shock, operating
IEC 60068-2-27 (Test Ea, Unpackaged Shock)
30 g
Shock, nonoperating
IEC 60068-2-27 (Test Ea, Unpackaged Shock)
50 g
Emissions
CISPR 11
Group 1, Class A
ESD immunity
IEC 61000-4-2
6 kV contact discharges
8 kV air discharges
Radiated RF immunity
IEC 61000-4-3
10V/m with 1 kHz sine-wave 80% AM from 802000 MHz
10V/m with 200 Hz 50% Pulse 100% AM @ 900 MHz
10V/m with 200 Hz 50% Pulse 100% AM @ 1890 MHz
3V/m with 1 kHz sine-wave 80% AM from 20002700 MHz
Table 35 - Certifications - 1784 Memory Cards
Certification
(1)
(1) See the Product Certification link at http://www.ab.com for Declarations of Conformity, Certificates, and other certification details.
1784-CF128, 1784-SD1, 1784-SD2
CE European Union 2004/108/EC EMC Directive, compliant with:
EN 61000-6-4; Industrial Emissions
EN 61326-1; Meas./Control/Lab., Industrial Requirements
EN 61000-6-2; Industrial Immunity
EN 61131-2; Programmable Controllers (Clause 8, Zone A & B)
C-Tick Australian Radio communications Act, compliant with: AS/NZS CISPR 11; Industrial Emissions
KC Korean Registration of Broadcasting and Communications Equipment, compliant with:
Article 58-2 of Radio Waves Act, Clause 3
Rockwell Automation Publication 1756-TD001H-EN-P - December 2013 33
1756 ControlLogix Controllers
1756 Energy Storage Modules
Instead of a battery, the 1756-L7x and 1756-L7xS controllers are shipped with a 1756-ESMCAP energy storage module
(ESM) already installed.
Table 36 - Technical Specifications - 1756 Energy Storage Modules
Attribute 1756-ESMCAP 1756-ESMNSE 1756-ESMNRM
Description Capacitor energy storage module (removable,
ships installed with every controller).
Capacitor energy storage module (removable,
no residual WallClockTime power backup).
Use this ESM if your application requires that
the installed ESM deplete its residual energy
to 40 J or less before transporting it into or
out of your application. Additionally, you can
use this ESM with a 1756-L73 (8 MB) or
smaller memory-sized controller only.
Wait at least 20 minutes for the residual
stored energy to decrease to 40 J or less
before you remove the ESM.
Capacitor energy storage module
(nonremovable, secures controller by
preventing USB connection an d SD card use).
If the SD card is installed prior to insertion of
the 1756-ESMNRM module, the SD card
remains functional, but not removable.
This ESM provides your application an
enhanced degree of security.
Current draw @ 5.1V DC 330 mA 300 mA 330 mA
North American temperature code T4A
IEC temperature code T4
Enclosure type rating None (open-style)
Table 37 - Environmental Specifications - 1756 Energy Storage Modules
Attribute 1756-ESMCAP, 1756-ESMNSE, 1756-ESMNRM
Temperature, operating
IEC 60068-2-1 (Test Ad, Operating Cold),
IEC 60068-2-2 (Test Bd, Operating Dry Heat),
IEC 60068-2-14 (Test Nb, Operating Thermal Shock)
060 C (32140 F)
Temperature, nonoperating
IEC 60068-2-1 (Test Ab, Unpackaged Nonoperating Cold),
IEC 60068-2-2 (Test Bb, Unpackaged Nonoperating Dry
Heat),
IEC 60068-2-14 (Test Na, Unpackaged Nonoperating
Thermal Shock)
-4085 C (-40185 F)
Temperature, surrounding air, max 60 C (140 F)
Relative humidity
IEC 60068-2-30 (Test Db, Unpackaged Damp Heat)
595% noncondensing
Vibration
IEC 60068-2-6 (Test Fc, Operating)
2 g @ 10 500 Hz
Shock, operating
IEC 60068-2-27 (Test Ea, Unpackaged Shock)
30 g
Shock, nonoperating
IEC 60068-2-27 (Test Ea, Unpackaged Shock)
50 g
Emissions
CISPR 11
Group 1, Class A
ESD immunity
IEC 61000-4-2
6 kV contact discharges
8 kV air discharges
34 Rockwell Automation Publication 1756-TD001H-EN-P - December 2013
1756 ControlLogix Controllers
Extreme Temperature Energy Storage Modules
The 1756-L7xXT and the 1756-L7xSXT extreme temperature controllers are shipped with a 1756-ESMCAPXT
installed.
Radiated RF immunity
IEC 61000-4-3
10V/m with 1 kHz sine-wave 80% AM from 802000 MHz
10V/m with 200 Hz 50% Pulse 100% AM @ 900 MHz
10V/m with 200 Hz 50% Pulse 100% AM @ 1890 MHz
3V/m with 1 kHz sine-wave 80% AM from 20002700 MHz
Table 38 - Certifications - 1756 Energy Storage Modules
Certification
(1)
(1) See the Product Certification link at http://www.ab.com for Declarations of Conformity, Certificates, and other certification details.
1756-ESMCAP, 1756-ESMNSE, 1756-ESMNRM
c-UL-us UL Listed Industrial Control Equipment, certified for US and Canada. See UL File E65584.
UL Listed for Class I, Division 2 Group A,B,C,D Hazardous Locations, certified for US and Canada. See UL File E194810.
CE European Union 2004/108/EC EMC Directive, compliant with:
EN 61326-1; Meas./Control/Lab., Industrial Requirements
EN 61000-6-2; Industrial Immunity
EN 61000-6-4; Industrial Emissions
EN 61131-2; Programmable Controllers (Clause 8, Zone A & B)
C-Tick Australian Radio communications Act, compliant with: AS/NZS CISPR 11; Industrial Emissions
Ex European Union 94/9/EC ATEX Directive, compliant with:
EN 60079-15; Potentially Explosive Atmospheres, Protection n
EN 60079-0; General Requirements
II 3 G Ex nA IIC T4 X
KC Korean Registration of Broadcasting and Communication Equipment, compliant with:
Article 58-2 of Radio Waves Act, Clause 3
Table 39 - Technical Specifications - 1756 Extreme Temperature Energy Storage Modules
Attribute 1756-ESMCAPXT 1756-ESMNSEXT 1756-ESMNRMXT
Description Capacitor energy storage module extreme
temperature (removable, ships installed
with every controller).
Capacitor energy storage module extreme
temperature (removable, no residual
WallClockTime power backup).
Use this ESM if your application requires
that the installed ESM deplete its residual
energy to 40 J or less before
transporting it into or out of your
application. Additionally, you can use this
ESM with a 1756-L73 (8 MB) or smaller
memory-sized controller only.
Wait at least 20 minutes for the residual
stored energy to decrease to 40 J or less
before you remove the ESM.
Capacitor energy storage module extreme
temperature (nonremovable, secures controller
by preventing USB connection an d SD card use).
If the SD card is installed prior to insertion of the
1756-ESMNRM module, the SD card remains
functional, but not removable.
This ESM provides your application an enhanced
degree of security.
Current draw @ 5.1V DC 330 mA 300 mA 330 mA
North American temperature code T4A
IEC temperature code T4
Enclosure type rating None (open-style)
Table 37 - Environmental Specifications - 1756 Energy Storage Modules (continued)
Attribute 1756-ESMCAP, 1756-ESMNSE, 1756-ESMNRM
Rockwell Automation Publication 1756-TD001H-EN-P - December 2013 35
1756 ControlLogix Controllers
Table 40 - Environmental Specifications - 1756 Extreme Temperature Energy Storage Modules
Attribute 1756-ESMCAPXT 1756-ESMNSEXT 1756-ESMNRMXT
Temperature, operating
IEC 60068-2-1 (Test Ad, Operating Cold),
IEC 60068-2-2 (Test Bd, Operating Dry Heat),
IEC 60068-2-14 (Test Nb, Operating Thermal Shock)
-2570 C (-13158 F)
Temperature, nonoperating
IEC 60068-2-1 (Test Ab, Unpackaged Nonoperating Cold),
IEC 60068-2-2 (Test Bb, Unpackaged Nonoperating Dry Heat),
IEC 60068-2-14 (Test Na, Unpackaged Nonoperating Thermal Shock)
-4085 C (-40185 F)
Temperature, surrounding air, max 70 C (158 F)
Relative humidity
IEC 60068-2-30 (Test Db, Unpackaged Damp Heat)
595% noncondensing
Vibration
IEC 60068-2-6 (Test Fc, Operating)
2 g @ 10 500 Hz
Shock, operating
IEC 60068-2-27 (Test Ea, Unpackaged Shock)
30 g
Shock, nonoperating
IEC 60068-2-27 (Test Ea, Unpackaged Shock)
50 g
Emissions
CISPR 11
Group 1, Class A
ESD immunity
IEC 61000-4-2
6 kV contact discharges
8 kV air discharges
Radiated RF immunity
IEC 61000-4-3
10V/m with 1 kHz sine-wave 80% AM from 802000 MHz
10V/m with 200 Hz 50% Pulse 100% AM @ 900 MHz
10V/m with 200 Hz 50% Pulse 100% AM @ 1890 MHz
3V/m with 1 kHz sine-wave 80% AM from 20002700 MHz
Table 41 - Certifications - 1756 Extreme Temperature Energy Storage Modules
Certification
(1)
(1) See the Product Certification link at http://www.ab.com for Declarations of Conformity, Certificates, and other certification details.
1756-ESMCAPXT, 1756-ESMNSEXT, 1756-ESMNRMXT
c-UL-us UL Listed Industrial Control Equipment, certified for US and Canada. See UL File E65584.
UL Listed for Class I, Division 2 Group A,B,C,D Hazardous Locations, certified for US and Canada. See UL File E194810.
CE European Union 2004/108/EC EMC Directive, compliant with:
EN 61326-1; Meas./Control/Lab., Industrial Requirements
EN 61000-6-2; Industrial Immunity
EN 61000-6-4; Industrial Emissions
EN 61131-2; Programmable Controllers (Clause 8, Zone A & B)
C-Tick Australian Radio communications Act, compliant with: AS/NZS CISPR 11; Industrial Emissions
Ex European Union 94/9/EC ATEX Directive, compliant with:
EN 60079-15; Potentially Explosive Atmospheres, Protection n
EN 60079-0; General Requirements
II 3 G Ex nA IIC T4 X
KC Korean Certification of Broadcasting and Communication Equipment, compliant with:
Article 58-2 of Radio Waves Act, Clause 3
36 Rockwell Automation Publication 1756-TD001H-EN-P - December 2013
1756 ControlLogix Controllers
GuardLogix Safety Partner Energy Storage Modules
The 1756-L7SP safety partner for a GuardLogix system has these energy storage modules available.
Table 42 - Technical Specifications - 1756-L7SP Safety Partner Energy Storage Modules
Attribute 1756-SPESMNSE 1756-SPESMNRM
Description Capacitor energy storage module for the safety partner (removable,
no residual WallClockTime power backup).
Use this ESM if your application requires that the installed ESM deplete
its residual energy to 40 J or less before transporting it into or out of
your application. Additionally, you can use this ESM with a 1756-L73
(8 MB) or smaller memory-sized controller only.
Wait at least 20 minutes for the residual stored energy to decrease to
40 J or less before you remove the ESM.
Capacitor energy storage module for the safety partner
(nonremovable, secures controller by preventing USB connection and
SD card use).
If the SD card is installed prior to insertion of the 1756-ESMNRM
module, the SD card remains functional, but not removable.
This ESM provides your application an enhanced degree of security.
Current draw @ 5.1V DC 300 mA 330 mA
North American temperature code T4A
IEC temperature code T4
Enclosure type rating None (open-style)
Table 43 - Environmental Specifications - 1756-L7SP Safety Partner Energy Storage Modules
Attribute 1756-SPESMNSE 1756-SPESMNRM
Temperature, operating
IEC 60068-2-1 (Test Ad, Operating Cold),
IEC 60068-2-2 (Test Bd, Operating Dry Heat),
IEC 60068-2-14 (Test Nb, Operating Thermal Shock)
060 C (32140 F)
Temperature, nonoperating
IEC 60068-2-1 (Test Ab, Unpackaged Nonoperating Cold),
IEC 60068-2-2 (Test Bb, Unpackaged Nonoperating Dry
Heat),
IEC 60068-2-14 (Test Na, Unpackaged Nonoperating
Thermal Shock)
-4085 C (-40185 F)
Temperature, surrounding air, max 60 C (140 F)
Relative humidity
IEC 60068-2-30 (Test Db, Unpackaged Damp Heat)
595% noncondensing
Vibration
IEC 60068-2-6 (Test Fc, Operating)
2 g @ 10500 Hz
Shock, operating
IEC 60068-2-27 (Test Ea, Unpackaged Shock)
30 g
Shock, nonoperating
IEC 60068-2-27 (Test Ea, Unpackaged Shock)
50 g
Emissions
CISPR 11
Group 1, Class A
ESD immunity
IEC 61000-4-2
6 kV contact discharges
8 kV air discharges
Radiated RF immunity
IEC 61000-4-3
10V/m with 1 kHz sine-wave 80% AM from 802000 MHz
10V/m with 200 Hz 50% Pulse 100% AM @ 900 MHz
10V/m with 200 Hz 50% Pulse 100% AM @ 1890 MHz
3V/m with 1 kHz sine-wave 80% AM from 20002700 MHz
Rockwell Automation Publication 1756-TD001H-EN-P - December 2013 37
1756 ControlLogix Controllers
GuardLogix Extreme-temperature Safety Partner Energy-storage Modules
The 1756-L7SPXT extreme-temperature safety partner is shipped with a 1756-SPESMNSEXT energy-storage module
installed.
Table 44 - Certifications - 1756-L7SP Safety Partner Energy Storage Modules
Certification
(1)
1756-SPESMNSE, 1756-SPESMNRM
c-UL-us UL Listed Industrial Control Equipment, certified for US and Canada. See UL File E65584.
UL Listed for Class I, Division 2 Group A,B,C,D Hazardous Locations, certified for US and Canada. See UL File E194810.
CE European Union 2004/108/EC EMC Directive, compliant with:
EN 61326-1; Meas./Control/Lab., Industrial Requirements
EN 61000-6-2; Industrial Immunity
EN 61000-6-4; Industrial Emissions
EN 61131-2; Programmable Controllers (Clause 8, Zone A & B)
C-Tick Australian Radio communications Act, compliant with: AS/NZS CISPR 11; Industrial Emissions
Ex European Union 94/9/EC ATEX Directive, compliant with:
EN 60079-15; Potentially Explosive Atmospheres, Protection n
EN 60079-0; General Requirements
II 3 G Ex nA IIC T4 X
KC Korean Registration of Broadcasting and Communications Equipment, compliant with:
Article 58-2 of Radio Waves Act, Clause 3
(1) When marked. See the Product Certification link at http://www.ab.com for Declarations of Conformity, Certificates, and other certification details.
Table 45 - Technical Specifications - 1756-L7SPXT Extreme-temperature Safety Partner Energy-storage Modules
Attribute 1756-SPESMNSEXT 1756-SPESMNRMXT
Description Capacitor energy-storage module for the extreme-temperature
safety partner (removable, no residual WallClockTime power
backup).
Use this ESM if your application requires that the installed ESM
deplete its residual energy to 40 J or less before transporting it into
or out of your application. Additionally, you can use this ESM with a
1756-L73 (8 MB) or smaller memory-sized controller only.
Wait at least 20 minutes for the residual stored energy to decrease
to 40 J or less before you remove the ESM.
Capacitor energy-storage module for the safety extreme-temperature
partner (nonremovable, secures controller by preventing USB
connection an d SD card use).
If the SD card is installed prior to insertion of the 1756-ESMNRM
module, the SD card remains functional, but not removable.
This ESM provides your application an enhanced degree of security.
Current draw @ 5.1V DC 300 mA 330 mA
North American temperature code T4A
IEC temperature code T4
Enclosure type rating None (open-style)
38 Rockwell Automation Publication 1756-TD001H-EN-P - December 2013
1756 ControlLogix Controllers
Table 46 - Environmental Specifications - 1756-L7SPXT Extreme-temperature Safety Partner Energy-storage Modules
Attribute 1756-SPESMNSEXT 1756-SPESMNRMXT
Temperature, operating
IEC 60068-2-1 (Test Ad, Operating Cold),
IEC 60068-2-2 (Test Bd, Operating Dry Heat),
IEC 60068-2-14 (Test Nb, Operating Thermal Shock)
-2570 C (-13158 F)
Temperature, nonoperating
IEC 60068-2-1 (Test Ab, Unpackaged Nonoperating Cold),
IEC 60068-2-2 (Test Bb, Unpackaged Nonoperating Dry Heat),
IEC 60068-2-14 (Test Na, Unpackaged Nonoperating Thermal Shock)
-4085 C (-40185 F)
Temperature, surrounding air, max 70 C (158 F)
Relative humidity
IEC 60068-2-30 (Test Db, Unpackaged Damp Heat)
595% noncondensing
Vibration
IEC 60068-2-6 (Test Fc, Operating)
2 g @ 10500 Hz
Shock, operating
IEC 60068-2-27 (Test Ea, Unpackaged Shock)
30 g
Shock, nonoperating
IEC 60068-2-27 (Test Ea, Unpackaged Shock)
50 g
Emissions
CISPR 11
Group 1, Class A
ESD immunity
IEC 61000-4-2
6 kV contact discharges
8 kV air discharges
Radiated RF immunity
IEC 61000-4-3
10V/m with 1 kHz sine-wave 80% AM from 802000 MHz
10V/m with 200 Hz 50% Pulse 100% AM @ 900 MHz
10V/m with 200 Hz 50% Pulse 100% AM @ 1890 MHz
3V/m with 1 kHz sine-wave 80% AM from 20002700 MHz
Table 47 - Certifications - 1756-L7SPXT Extreme-temperature Safety Partner Energy-storage Modules
Certification
(1)
(1) When marked. See the Product Certification link at http://www.ab.com for Declarations of Conformity, Certificates, and other certification details.
1756-SPESMNSEXT, 1756-SPESMNRMXT
c-UL-us UL Listed Industrial Control Equipment, certified for US and Canada. See UL File E65584.
UL Listed for Class I, Division 2 Group A,B,C,D Hazardous Locations, certified for US and Canada. See UL File E194810.
CE European Union 2004/108/EC EMC Directive, compliant with:
EN 61326-1; Meas./Control/Lab., Industrial Requirements
EN 61000-6-2; Industrial Immunity
EN 61000-6-4; Industrial Emissions
EN 61131-2; Programmable Controllers (Clause 8, Zone A & B)
C-Tick Australian Radio communications Act, compliant with: AS/NZS CISPR 11; Industrial Emissions
Ex European Union 94/9/EC ATEX Directive, compliant with:
EN 60079-15; Potentially Explosive Atmospheres, Protection n
EN 60079-0; General Requirements
II 3 G Ex nA IIC T4 X
KC Korean Registration of Broadcasting and Communications Equipment, compliant with:
Article 58-2 of Radio Waves Act, Clause 3
Rockwell Automation Publication 1756-TD001H-EN-P - December 2013 39
1756 ControlLogix Controllers
1756 ControlLogix Batteries
Each ControlLogix controller ships with a battery. The 1756-L6x controllers have nonvolatile memory if you install a
1784-CF128 industrial CompactFlash card. With nonvolatile memory, the controller can be used without a battery. If you
do not use a battery, current tag data will remain in the state it was when the nonvolatile memory was saved.
These tables summarize battery life, replacement battery compatibility, and recommendations for use of an
externally-mounted battery assembly.
Serial Communication Cables
The 1756-L6x and 1756-L6xS controllers have a built-in serial port.
Table 48 - Technical Specifications - 1756 ControlLogix Batteries
Attribute 1756-BA1 1756-BA2 1756-BATM
(2)
(2) The 1756-BATM externally-mounted battery assembly is recommended for use with all 1756-L55x controllers, and is highly recommended for use with all series A 1756-L6x controllers, and provides
longer battery life than the 1756-BA1 battery. The 1756-BATM assembly includes one 1756-BATA lithium battery assembly and a 1 m (3.28 ft) cable to connect housing to the controller.
1756-BATA
Description Lithium battery (0.59 g) Lithium battery (0.59 g) Externally-mounted battery
assembly
Replacement lithium battery for
1756-BATM (5 g max lithium per
each D cell; contains 2 D cells)
ControlLogix controllers 1756-L61, 1756-L62, 1756-L63
controllers, series A
1756-L61, 1756-L62, 1756-L63
controllers, series B
1756-L64, 1756-L65 controllers
1756-L61, 1756-L62, 1756-L63
controllers, series A
1756-BATM battery module
GuardLogix controllers 1756-L61S, 1756-L62S,
1756-L63S

Supported legacy controllers 1756-L55Mx controllers
(1)

1756-L60M03SE controller
(1) The 1756-L55M22, 1756-L55M23, and 1756-L55M24 controllers have nonvolatile memory and can be used without a battery.
1756-L55Mx controllers
(2)
1756-L60M03SE controller
1756-BATM battery module
Table 49 - Technical Specifications - 1756 Serial Cables
Attribute 1756-CP3 1747-CP3
Connector type Female 9-pin D-shell
Connector angle Right angle connector to controller, straight to serial port
Length 3 m (9.84 ft)
Allen-Bradley, Rockwell Software, Rockwell Automation, Armor GuardLogix, ArmorBlock, ArmorBlock MaXum, ArmorPOINT, CompactBlock, CompactLogix, ControlLogix, ControlLogix-XT, Data Highway Plus,
DH+, DriveLogix, FactoryTalk, FLEX Ex, FLEX, FLEX I/O-XT, FlexLogix, Gurard I/O, GuardLogix, InView, LISTEN.THINK.SOLVE., Logix5000, MicroLogix, On-Machine, PanelView, PLC-2, PLC-3, PLC-5, POINT
I/O, POINT Guard I/O, PowerFlex, RSLinx, RSLogix, SCANport, SLC, SoftLogix, and SynchLink are trademarks of Rockwell Automation, Inc.
Trademarks not belonging to Rockwell Automation are property of their respective companies.
Rockwell Otomasyon Ticaret A.., Kar Plaza Merkezi E Blok Kat:6 34752 erenky, stanbul, Tel: +90 (216) 5698400
Publication 1756-TD001H-EN-P - December 2013
Supersedes Publication 1756-TD001G-EN-P - January 2013 Copyright 2013 Rockwell Automation, Inc. All rights reserved. Printed in the U.S.A.
Power, Control and Information Solutions Headquarters
Americas: Rockwell Automation, 1201 South Second Street, Milwaukee, WI 53204-2496 USA, Tel: (1) 414.382.2000, Fax: (1) 414.382.4444
Europe/Middle East/Africa: Rockwell Automation NV, Pegasus Park, De Kleetlaan 12a, 1831 Diegem, Belgium, Tel: (32) 2 663 0600, Fax: (32) 2 663 0640
Asia Pacifc: Rockwell Automation, Level 14, Core F, Cyberport 3, 100 Cyberport Road, Hong Kong, Tel: (852) 2887 4788, Fax: (852) 2508 1846
www.rockwellautomation.com
Important User Information
Solid-state equipment has operational characteristics differing from those of electromechanical equipment. Safety
Guidelines for the Application, Installation and Maintenance of Solid State Controls (publication SGI-1.1 available from
your local Rockwell Automation sales office or online at http://www.rockwellautomation.com/literature/) describes some
important differences between solid-state equipment and hard-wired electromechanical devices. Because of this difference,
and also because of the wide variety of uses for solid-state equipment, all persons responsible for applying this equipment
must satisfy themselves that each intended application of this equipment is acceptable.
In no event will Rockwell Automation, Inc. be responsible or liable for indirect or consequential damages resulting from the
use or application of this equipment.
The examples and diagrams in this publication are included solely for illustrative purposes. Because of the many variables
and requirements associated with any particular installation, Rockwell Automation, Inc. cannot assume responsibility or
liability for actual use based on the examples and diagrams.
No patent liability is assumed by Rockwell Automation, Inc. with respect to use of information, circuits, equipment, or
software described in this manual.
Reproduction of the contents of this manual, in whole or in part, without written permission of Rockwell Automation,
Inc., is prohibited.
Documentation Feedback
Your comments will help us serve your documentation needs better. If you have any suggestions on how to improve this
document, complete this form, publication RA-DU002, available at http://www.rockwellautomation.com/literature/.