Scribd
Upload
58 views2 pages

Question Paper Code:: Reg. No.

This document contains a past exam paper for the subject Computer Science and Engineering. The exam paper tests knowledge of analog and digital communication topics and is divided into two parts. Part A contains 10 short answer questions worth 2 marks each. Part B contains 5 longer answer questions worth 16 marks each, testing topics such as frequency modulation, amplitude modulation, binary phase shift keying, error detection techniques, and spread spectrum modulation. The document provides the full exam paper for review and study purposes.

Uploaded by

vijaikiruba
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
58 views2 pages

Question Paper Code:: Reg. No.

This document contains a past exam paper for the subject Computer Science and Engineering. The exam paper tests knowledge of analog and digital communication topics and is divided into two parts. Part A contains 10 short answer questions worth 2 marks each. Part B contains 5 longer answer questions worth 16 marks each, testing topics such as frequency modulation, amplitude modulation, binary phase shift keying, error detection techniques, and spread spectrum modulation. The document provides the full exam paper for review and study purposes.

Uploaded by

vijaikiruba
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

h

t
t
p
:
/
/
c
s
e
t
u
b
e
.
t
k
/

Reg. No. :


B.E./B.Tech. DEGREE EXAMINATION, APRIL/MAY 2010
Third Semester
Computer Science and Engineering
CS2204 ANALOG AND DIGITAL COMMUNICATION
(Regulation 2008)
Time: Three hours Maximum: 100 Marks
Answer ALL Questions
PART A (10 2 = 20 Marks)
1. In a Amplitude modulation system, the carrier frequency is KHz 100 F
C
= . The
maximum frequency of the signal is 5 KHz. Determine the lower and upper
side bonds and the bond width of AM signal.
2. The maximum frequency deviation in an FM is 10 KHz and signal frequency is
10 KHz. Find out the bandwidth using Carsons rule and the modulation index.
3. Draw the ASK and FSK signals for the binary signal s (t) = 1011001.
4. What are the advantages of QPSK?
5. Define Nyquist sampling theorem.
6. For the signal ( ) t t t m 1000 sin 4 500 cos 3 + = , Determine the Nyquist
sampling rate.
7. What is meant by ASCII code?
8. Which error detection technique is simple and which one is more reliable?
9. What are the applications of spread spectrum modulation?
10. Design processing gain in spread spectrum modulation.
PART B (5 16 = 80 Marks)
11. (a) (i) Distinguish between FM and PM by giving its mathematical
analysis. (8)
(ii) Derive the relationship between the voltage amplitudes of the side
band frequencies and the carrier and draw the frequency spectrum. (8)
Or
(b) (i) Discuss about the sets of side bands produced when a carrier is
frequency modulated by a single frequency sinusoid. (8)
Question Paper Code: E3062
http://csetube.weebly.com/
h
t
t
p
:
/
/
c
s
e
t
u
b
e
.
t
k
/

E 3062 2
(ii) In an AM modulator, 500 KHz carrier of amplitude 20 V is
modulated by 10 KHz modulating signal which causes a change in
the output wave of V 5 . 7 . Determine :
(1) Upper and lower side band frequencies
(2) Modulation Index
(3) Peak amplitude of upper and lower side frequency
(4) Maximum and minimum amplitudes of envelope. (8)
12. (a) What is known as Binary phase shift keying? Discuss in detail the BPSK
transmitter and Receiver and also obtain the minimum double sided
Nyquist bandwidth.
Or
(b) (i) Illustrate the concept of 8 QAM transmitter with the truth table. (8)
(ii) What is the need for carrier Recovery? Explain the Costas loop
method of carrier recovery. (8)
13. (a) (i) What is called companding? Briefly discuss the Analog companding.
(8)
(ii) Discuss about the causes of ISI. (8)
Or
(b) (i) Explain in detail the Delta modulation transmitter and Receiver.
(10)
(ii) Discuss the draw backs of delta modulation and explain the
significance of adaptive delta modulator. (6)
14. (a) (i) Describe the most common error detection techniques. (12)
(ii) Discuss the function of a data modem. (4)
Or
(b) (i) Explain in detail the characteristics of IEEE 488 Bus. (10)
(ii) Briefly explain the three methods of error connection. (6)
15. (a) (i) What is a Pseudo noise sequence? What are the properties of
Pseudo noise sequence? (8)
(ii) Describe the application of CDMA in Wireless communication
system. (8)
Or
(b) (i) With a block diagram explain, DS spread spectrum with coherent
binary PSK. (10)
(ii) Explain the near-far problem in spread spectrum modulation? (6)

http://csetube.weebly.com/

You might also like