Scribd
Upload
472 views2 pages

AAF Fan Filter Unit

AAF AstroFan FFU is a selfcontained ceiling filter fan unit for use in turbulent mixing and laminar air flow cleanroom areas. The unit is designed for use with the 50 and 55 mm T-Bar ceiling grid, the AstroDry HD ceiling grid and compatible grids. Utilizing EC system (electrical commutated) external rotor motors greatly reduces the power consumption of the unit, because of reduced losses.

Uploaded by

api-19907798
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
472 views2 pages

AAF Fan Filter Unit

AAF AstroFan FFU is a selfcontained ceiling filter fan unit for use in turbulent mixing and laminar air flow cleanroom areas. The unit is designed for use with the 50 and 55 mm T-Bar ceiling grid, the AstroDry HD ceiling grid and compatible grids. Utilizing EC system (electrical commutated) external rotor motors greatly reduces the power consumption of the unit, because of reduced losses.

Uploaded by

api-19907798
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

AstroFan FFU

Self-contained Filter Fan Unit

● Low energy consumption


● Low operating cost
● High total static pressure
at full air flow
● Easy installation into
cleanroom grids

Application Construction Noise level


The AAF AstroFan FFU is a self- The AstroFan unit comprises a mild The unit, with a clean filter at full
contained ceiling filter fan unit for galvanized steel housing with a high rated air flow has a single unit SPL
use in turbulent mixing and laminar performance, encapsulated, direct of 52-56 dB(a) at 1m.
air flow cleanroom areas. The unit is driven backward curved fan/motor
designed for use with the AAF combination and a replaceable
50 and 55 mm T-Bar ceiling grid, HEPA or ULPA AstroCel II filter.
the AstroDry HD ceiling grid and Large units and EC units are made
compatible grids. When executed from aluminium. Options include
with a knife edge, the unit can also an epoxy coated white RAL 9010
be utilized in the AstroGel ND housing, which because it can be
liquid seal ceiling grid. The unit is decontaminated with disinfectant, is
light weight and easy to install. suitable for sterile applications.

B E T T E R A I R I S O U R B U S I N E S S®
AstroFan FFU

Motors and controls Controls include the electronic leakfree operation. Selected low
The unit is available with traditional commutation unit, standard single pressure drop of the AstroCel II
high efficient AC motors, operating unit control, standard RFI supression provides, in combination with the
with single phase or 3 phase motors. and PFC (power factor controller ) high total static pressure of the fan, a
Controls can be either with 5 step and LON® bus interface. Two wire free static pressure of 70-100 Pa at
speed controller or stepless controller. twisted cable installation to the bus full rated airflow. This results in
This execution provides a simple and makes installation easy. Mains supply extended filter life or it can be
reliable economical solution for is single phase 230-270V 50/60Hz. utilized for external use on prefilters
many applications. or cooling coils.

Utilizing EC system (electrical AstroCel II HEPA and ULPA filters Options


commutated) external rotor motors The unit is equipped with HEPA • Room Side Change (RSC)
greatly reduces the power filters in Class H14 to EN 1822 or • Cooling coil
consumption of the unit, because of ULPA filters Class U15, U16 or • Individual ceiling frames
reduced losses. Consequently the U17. All filters are factory scanned to • 60 Hz operation
cooling requirement is also reduced. the European Standard to ensure

Performance Data
Size 66 612 912 1212

Airflow 520 / 0.14 1060 / 0.3 1590 / 0.44 2120 / 0.6


(m3/h / m3/s?
Actual Dimensions 570 x 570 x 290 570 x 1170 x 290 870 x 1170 x 350 1170 x 1170 x 350
L x W x H* (mm)

Nominal
Motor Data
230/1/50 0.26 kW - 1.2 A 0.29 kW - 1.3 A 0.52 kW - 2.2 A 0.68 kW - 3.0 A
400/3/50 0.21 kW - 0.5 A 0.23 kW - 0.55 A 0.43 kW - 0.88 A 0.61 kW - 1.18 A
EC 230/1/50/60 0.17 kW - 0.75 A 0.22 kW - 0.98 A 0.34 kW - 1.5 A 0.34 kW - 1.5 A

Approx. weight (kg)


Galv. steel 32 45 - -
aluminium 25 35 65 72

Other sizes upon request.


* Excluding filter.

AAF-International B.V. International AAF Offices: AAF Agents:


P.O. Box 7928 Vienna (A), Montreal (CDN), Dortmund (D), Copenhagen (DK), Bangalore (IND)
1008 AC Amsterdam Vitoria (E), Paris (F), Cramlington (GB), Oslo (N), Lisbon (P), Johannesburg (RSA),
The Netherlands Athens (GR), Milan (I), Riyadh (KSA), Dalsjöfors (S), Malmö (S), Helsinki (SF)
Tel.: + 31 20 549 44 11 Mexico (Mex), Amsterdam (NL), Singapore,
Fax: + 31 20 644 43 98 Istanbul (TR), Louisville, Ky (USA)

AAF has a policy of continuous product research and improvement and reserves the right to change design and
specifications without notice

CR-3-1168-IN-3-0101 © 2001 AAF International

You might also like