Model Lso Linear Slot Outlet Installation Instructions

260 NORTH ELM STREET WESTFIELD, MA 01085 800-465-8558 FAX (413) 564-5815
7555 TRANMERE DRIVE MISSISSAUGA, ONTARIO L5S 1L4 CANADA (905) 672-2991 FAX (905) 672-2883
MODEL LSO
LINEAR SLOT
OUTLET
INSTALLATION
INSTRUCTIONS
LSO2-310
W30-WG0563
GENERAL
The SpacePak linear slot outlet is designed for
installation in both new construction and retrofit
applications. The fully integrated outlet requires no
additional mounting hardware and is supplied with a
trim plate that boasts a slim prole less than 1/8 inch.
SECTION 1: DIMENSIONAL INFORMATION ............ 2
SECTION 2: INSTALLATION
New Construction Installation ................................ 2 & 3
Existing Construction Installation .......................... 2 & 3
WARRANTY ................................................................ 4
5/11
2
Section 1: LSO DIMENSIONAL INFORMATION
Section 2: INSTALLATION
LSO Installation in New Construction
see Figure 1
1. Secure attenuator tube to LSO kwik connect.
2. Position LSO against stud so that front edge of Trim
Plate Mounting Tab is ush with front edge of stud
(see Figure 2).
3. Secure LSO to stud using wood screws.
4. Loosely attach Trim Plate to LSO body.
5. Install rst sheetrock panel to meet edge of LSO
Trim Plate.
6. Place LSO template on second sheetrock panel
so that edge nearest stud is positioned where stud
ends (see Figure 3).
7. Cut notch and install panel.
8. Tighten Trim Plate screws. Do not to over tighten.
LSO Installation in Existing Construction
see Figure 4
1. Loosely attach Trim Plate to LSO body.
2. Secure attenuator tube to LSO kwik connect.
3. Cut out a 9" high section of sheetrock from
centerline to centerline of studs.
4. Position LSO against stud so that front surface of
Trim Plate Mounting Tab is ush with front surface
of stud (see Figure 2) and edge of LSO Trim Plate
rests against sheetrock.
5. Secure LSO to stud using wood screws.
6. Place LSO template on sheet-rock panel cut in
step 3 aligning with edge of stud (see Figure 3).
7. Cut notch and install panel.
8. Tighten Trim Plate screws. Do not to over tighten.
3
FIGURE 4: STUD POSITIONING EXISTING CONSTRUCTION
Edge of
Stud
Attenuator
Tube
Kwik
Connect
System
FIGURE 1: STUD POSITIONING NEW CONSTRUCTION
Edge of
Stud
Attenuator
Tube
Kwik
Connect
System
FIGURE 2: MOUNTING LSO TO STUD
FIGURE 3: LSO TEMPLATE
LIMITED WARRANTY
Central Air Conditioning Products
The Manufacturer warrants to the original owner at the original installation site that the Central Air
Conditioning Products (the Product) will be free from defects in material or workmanship for a period
not to exceed one (1) year from the startup or eighteen (18) months from date of shipment from the
factory, whichever occurs rst. If upon examination by the Manufacturer the Product is shown to have a
defect in material or workmanship during the warranty period, the Manufacturer will repair or replace, at
its option, that part of the Product which is shown to be defective.
This limited warranty does not apply:
a) if the Product has been subjected to misuse or neglect, has been accidentally or intentionally
damaged, has not been installed, maintained or operated in accordance with the furnished
written instructions, or has been altered or modied in any way.
b) to any expenses, including labor or material, incurred during removal or reinstallation of the
defective Product or parts thereof.
c) to any workmanship of the installer of the Product.
This limited warranty is conditional upon:
a) shipment, to the Manufacturer, of that part of the Product thought to be defective. Goods can only
be returned with prior written approval from the Manufacturer. All returns must be freight prepaid.
b) determination, in the reasonable opinion of the Manufacturer, that there exists a defect in material
or workmanship.
Repair or replacement of any part under this Limited Warranty shall not extend the duration of the
warranty with respect to such repaired or replaced part beyond the stated warranty period.
THIS LIMITED WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EITHER EXPRESS OR
IMPLIED, AND ALL SUCH OTHER WARRANTIES, INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE
HEREBY DISCLAIMED AND EXCLUDED FROM THIS LIMITED WARRANTY. IN NO EVENT SHALL
THE MANUFACTURER BE LIABLE IN ANY WAY FOR ANY CONSEQUENTIAL, SPECIAL, OR
INCIDENTAL DAMAGES OF ANY NATURE WHATSOEVER, OR FOR ANY AMOUNTS IN EXCESS
OF THE SELLING PRICE OF THE PRODUCT OR ANY PARTS THEREOF FOUND TO BE DEFECTIVE.
THIS LIMITED WARRANTY GIVES THE ORIGINAL OWNER OF THE PRODUCT SPECIFIC LEGAL
RIGHTS. YOU MAY ALSO HAVE OTHER RIGHTS WHICH MAY VARY BY EACH JURISDICTION.

Model Lso Linear Slot Outlet Installation Instructions

Uploaded by

Copyright:

Available Formats

Model Lso Linear Slot Outlet Installation Instructions

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Model Lso Linear Slot Outlet Installation Instructions

Uploaded by

Copyright:

Available Formats

260 NORTH ELM STREET WESTFIELD, MA 01085 800-465-8558 FAX (413) 564-5815

You might also like