Scribd
Upload
161 views3 pages

Anand Institute

The TM 150 Universal Vibration System is an experimental system for studying mechanical oscillations, vibrations, and resonance effects. It includes various pendulums, bars, springs, and other components that can be used to study [1] damping, [2] forced vibration experiments, and [3] resonance effects. The system is mounted on a sturdy rolling frame and includes components like an electrical exciter and sensors to generate and record vibrations.

Uploaded by

Sai Vishnu
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
161 views3 pages

Anand Institute

The TM 150 Universal Vibration System is an experimental system for studying mechanical oscillations, vibrations, and resonance effects. It includes various pendulums, bars, springs, and other components that can be used to study [1] damping, [2] forced vibration experiments, and [3] resonance effects. The system is mounted on a sturdy rolling frame and includes components like an electrical exciter and sensors to generate and record vibrations.

Uploaded by

Sai Vishnu
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

TM 150 Universal Vibration System

* Extensive experimental system for mechanical


oscillation
1

* Experiments on various pendulums, bar-type
oscillators and spring-mass systems
1

* Damping, resonance and damping effects with
forced vibration
Technical Description
The instructional system covers a wide range of topics
in mechanical vibration technology. It is mounted on a
sturdy, low-vibration aluminum sectional frame which
is installed on a rolling laboratory trolley with braked
wheels. Quick fastening elements for the formed
grooves for quick and accurate experimental set-up.
Forced vibration is generated with an electrical motor-
driven unbalance exciter. The exciter frequency can be
set precisely on a control unit with digital display. An
oil damper is used for vibration abatement. A bar-type
oscillator that can be adjusted with weights is included
for absorber experiments. A mechanical drum and a
polar diagram recorder record the vibration. The single
parts are stored in the protective storage
compartments of the laboratory trolley. The external
computer-aided PC data acquisition (TM 150.20) and
a practice set for torsional vibrations (TM 150.02) are
available as accessories.

Learning Objectives / Experiments
- Experiments with pendulums
+ reversing pendulum
+ shortened pendulum length
+ spring-mass system
- Bar-type oscillator
+ undamped vibration
+ damped vibration
+ forced vibration
- Damped and undamped resonance
- Multi-weight oscillator damping effect
G.U.N.T Gertebau GmbH, Fahrenberg 14, D-22885 Barsbttel, Phone +49 (40) 67 08 54-0, Fax +49 (40) 67 08 54-42, E-mail [email protected], Web http://www.gunt.de
We reserve the right to modify our products without any notifications.
Page 1/3
12/2007

TM 150 Universal Vibration System
1 laboratory trolley, 2 frame, 3 exciter control unit with digital frequency display,
4 drum recorder for recording vibration, 5 suspension spring, 6 unbalance exciter,
7 rigid bar as discrete oscillator, 8 damper cylinder
from left to right: rod pendulum, wood pendulum with adjustable weight, thread
pendulum, bifilar thread pendulum with various weights
Absorber effect of additional weights: The shaded area shows at f
R
the
resonance of the unaffected bar-type oscillator. The 2 grey areas at f
1
and f
2
are
the new resonances of the system bar with absorber.
At f
R
the amplitude of the oscillation system produced by the absorber
disappears almost completely.
Specification
[1] Instructional and experimental vibration system,
experiments on damping, resonance, two-weight
system and vibration absorbing
[2] 6 pendulum oscillators, 2 bar-type oscillators,
1 spring-mass oscillator
[3] Electrical unbalance exciter
[4] Electronic exciter control unit with digital frequency
display and TTL output for triggering external units
[5] Adjustable absorber with leaf spring
[6] Oil-filled damper
[7] Rolling recorder, 20mm/s, width 100mm
[8] Polar diagram recorder, D=100mm
[9] Sturdy aluminum sectional frame on laboratory
trolley, opening wxh 870x680mm, groove width 10mm
[10] 230V, 50Hz, 1 phase

Technical Data
Bar, rigid: lxwxh: 700x25x12mm, 1.6kg
Bar, flexible: lxwxh: 25x4x700mm, 0.6kg
Tension / compression springs
- 0.75N/mm
- 1.5N/mm
- 3.0N/mm
Unbalance exciter
- 0...50Hz
- 100cmg
Oil-filled damper: 5...15Ns/m
Absorber
- leaf spring, wxh: 20x1.5mm
- total weight: approx. 1.1kg
- adjustable 5...50Hz
Groove width of frame: 10mm

Dimensions and Weight
l x w x h : 1000 x 800 x 1800 mm
Opening in frame w x h :870 x 680 mm
Weight : approx. 160 kg
Connections
230V, 50Hz, 1 phase (control unit)
Scope of Delivery
1 experiment frame and laboratory trolley
6 pendulums
2 bars
3 springs
1 exciter control unit
1 unbalance exciter
1 damper
2 recording devices
1 experiment instructions

Order Details
040.15000 TM 150 Universal Vibration System
G.U.N.T Gertebau GmbH, Fahrenberg 14, D-22885 Barsbttel, Phone +49 (40) 67 08 54-0, Fax +49 (40) 67 08 54-42, E-mail [email protected], Web http://www.gunt.de
We reserve the right to modify our products without any notifications.
Page 2/3
12/2007
TM 150 Universal Vibration System
Available Accessories:

Product no. Order text
040.15001 TM 150.01 Vibration Sensor with Clamping Set
040.15002 TM 150.02 Free and Damped Torsional Vibrations

040.15020 TM 150.20 PC-Aided Data Recording System for TM 150 and TM 155

G.U.N.T Gertebau GmbH, Fahrenberg 14, D-22885 Barsbttel, Phone +49 (40) 67 08 54-0, Fax +49 (40) 67 08 54-42, E-mail [email protected], Web http://www.gunt.de
We reserve the right to modify our products without any notifications.
Page 3/3
12/2007

You might also like