Chapter 3: Formatted Input/Output

Copyright 2008 W. W. Norton & Company.

All rights reserved.
1
Chapter 3
Formatted Input/Output
Chapter 3: Formatted Input/Output
The printf Function
The pr i nt f function must be supplied with a format
string, followed by any values that are to be inserted
into the string during printing:
pr i nt f ( string, expr1, expr2, ) ;
The format string may contain both ordinary
characters and conversion specifications, which begin
with the %character.
A conversion specification is a placeholder
representing a value to be filled in during printing.
%d is used for i nt values
%f is used for f l oat values
Copyright 2008 W. W. Norton & Company.
All rights reserved.
2
Chapter 3: Formatted Input/Output
The printf Function
Ordinary characters in a format string are printed as they
appear in the string; conversion specifications are replaced.
Example:
i nt i , j ;
f l oat x, y;
i = 10;
j = 20;
x = 43. 2892f ;
y = 5527. 0f ;
pr i nt f ( " i = %d, j = %d, x = %f , y = %f \ n" , i , j , x, y) ;
Output:
i = 10, j = 20, x = 43. 289200, y = 5527. 000000
Copyright 2008 W. W. Norton & Company.
All rights reserved.
3
Chapter 3: Formatted Input/Output
The printf Function
Compilers arent required to check that the
number of conversion specifications in a format
string matches the number of output items.
Too many conversion specifications:
pr i nt f ( " %d %d\ n" , i ) ; / *** WRONG ***/
Too few conversion specifications:
pr i nt f ( " %d\ n" , i , j ) ; / *** WRONG ***/
Copyright 2008 W. W. Norton & Company.
All rights reserved.
4
Chapter 3: Formatted Input/Output
The printf Function
Compilers arent required to check that a
conversion specification is appropriate.
If the programmer uses an incorrect specification,
the program will produce meaningless output:
pr i nt f ( " %f %d\ n" , i , x) ; / *** WRONG ***/
Copyright 2008 W. W. Norton & Company.
All rights reserved.
5
Chapter 3: Formatted Input/Output
Conversion Specifications
A conversion specification can have the form %m. pX
or %- m. pX, where m and p are integer constants and
X is a letter.
Both m and p are optional; if p is omitted, the period
that separates m and p is also dropped.
In the conversion specification %10. 2f , m is 10, p is
2, and X is f .
In the specification %10f , m is 10 and p (along with
the period) is missing, but in the specification %. 2f , p
is 2 and m is missing.
Copyright 2008 W. W. Norton & Company.
All rights reserved.
6
Chapter 3: Formatted Input/Output
Conversion Specifications
The minimum field width, m, specifies the minimum
number of characters to print.
If the value to be printed requires fewer than m characters,
it is right-justified within the field.
%4d displays the number 123 as 123. ( represents the
space character.)
If the value to be printed requires more than m characters,
the field width automatically expands to the necessary size.
Putting a minus sign in front of m causes left justification.
The specification %- 4d would display 123 as 123.
Copyright 2008 W. W. Norton & Company.
All rights reserved.
7
Chapter 3: Formatted Input/Output
Conversion Specifications
The meaning of the precision, p, depends on the
choice of X, the conversion specifier.
The d specifier is used to display an integer in
decimal form.
p indicates the minimum number of digits to display
(extra zeros are added to the beginning of the number if
necessary).
If p is omitted, it is assumed to be 1.
Copyright 2008 W. W. Norton & Company.
All rights reserved.
8
Chapter 3: Formatted Input/Output
Conversion Specifications
Conversion specifiers for floating-point numbers:
e Exponential format. p indicates how many digits
should appear after the decimal point (the default is 6). If p
is 0, no decimal point is displayed.
f Fixed decimal format. p has the same meaning as
for the e specifier.
g Either exponential format or fixed decimal format,
depending on the numbers size. p indicates the maximum
number of significant digits to be displayed. The g
conversion wont show trailing zeros. If the number has no
digits after the decimal point, g doesnt display the
decimal point.
Copyright 2008 W. W. Norton & Company.
All rights reserved.
9
Chapter 3: Formatted Input/Output
Program: Using printf to Format Numbers
The t pr i nt f . c program uses pr i nt f to
display integers and floating-point numbers in
various formats.
Copyright 2008 W. W. Norton & Company.
All rights reserved.
10
Chapter 3: Formatted Input/Output
tprintf.c
/ * Pr i nt s i nt and f l oat val ues i n var i ous f or mat s */
#i ncl ude <st di o. h>
i nt mai n( voi d)
{
i nt i ;
f l oat x;
i = 40;
x = 839. 21f ;
pr i nt f ( " | %d| %5d| %- 5d| %5. 3d| \ n" , i , i , i , i ) ;
pr i nt f ( " | %10. 3f | %10. 3e| %- 10g| \ n" , x, x, x) ;
r et ur n 0;
}
Output:
| 40| 40| 40 | 040|
| 839. 210| 8. 392e+02| 839. 21 |
Copyright 2008 W. W. Norton & Company.
All rights reserved.
11
Chapter 3: Formatted Input/Output
Escape Sequences
The \ n code that used in format strings is called
an escape sequence.
Escape sequences enable strings to contain
nonprinting (control) characters and characters
that have a special meaning (such as ").
A partial list of escape sequences:
Alert (bell) \ a
Backspace \ b
New line \ n
Horizontal tab\ t
Copyright 2008 W. W. Norton & Company.
All rights reserved.
12
Chapter 3: Formatted Input/Output
Escape Sequences
A string may contain any number of escape
sequences:
pr i nt f ( " I t em\ t Uni t \ t Pur chase\ n\ t Pr i ce\ t Dat e\ n" ) ;
Executing this statement prints a two-line heading:
I t em Uni t Pur chase
Pr i ce Dat e
Copyright 2008 W. W. Norton & Company.
All rights reserved.
13
Chapter 3: Formatted Input/Output
Escape Sequences
Another common escape sequence is \ " , which
represents the " character:
pr i nt f ( " \ " Hel l o! \ " " ) ;
/ * pr i nt s " Hel l o! " */
To print a single \ character, put two \ characters
in the string:
pr i nt f ( " \ \ " ) ;
/ * pr i nt s one \ char act er */
Copyright 2008 W. W. Norton & Company.
All rights reserved.
14
Chapter 3: Formatted Input/Output
The scanf Function
scanf reads input according to a particular
format.
A scanf format string may contain both ordinary
characters and conversion specifications.
The conversions allowed with scanf are
essentially the same as those used with pr i nt f .
Copyright 2008 W. W. Norton & Company.
All rights reserved.
15
Chapter 3: Formatted Input/Output
The scanf Function
In many cases, a scanf format string will contain
only conversion specifications:
i nt i , j ;
f l oat x, y;
scanf ( " %d%d%f %f " , &i , &j , &x, &y) ;
Sample input:
1 - 20 . 3 - 4. 0e3
scanf will assign 1, 20, 0.3, and 4000.0 to i ,
j , x, and y, respectively.
Copyright 2008 W. W. Norton & Company.
All rights reserved.
16
Chapter 3: Formatted Input/Output
The scanf Function
When using scanf , the programmer must check
that the number of conversion specifications
matches the number of input variables and that
each conversion is appropriate for the
corresponding variable.
Another trap involves the &symbol, which
normally precedes each variable in a scanf call.
The &is usually (but not always) required, and its
the programmers responsibility to remember to
use it.
Copyright 2008 W. W. Norton & Company.
All rights reserved.
17
Chapter 3: Formatted Input/Output
How scanf Works
scanf tries to match groups of input characters
with conversion specifications in the format string.
For each conversion specification, scanf tries to
locate an item of the appropriate type in the input
data, skipping blank space if necessary.
scanf then reads the item, stopping when it
reaches a character that cant belong to the item.
If the item was read successfully, scanf continues
processing the rest of the format string.
If not, scanf returns immediately.
Copyright 2008 W. W. Norton & Company.
All rights reserved.
18
Chapter 3: Formatted Input/Output
How scanf Works
As it searches for a number, scanf ignores white-space
characters (space, horizontal and vertical tab, form-feed, and
new-line).
A call of scanf that reads four numbers:
scanf ( " %d%d%f %f " , &i , &j , &x, &y) ;
The numbers can be on one line or spread over several lines:
1
- 20 . 3
- 4. 0e3
scanf sees a stream of characters ( represents new-line):
1- 20. 3- 4. 0e3
ssr sr r r sssr r ssssr r r r r r (s =skipped; r =read)
scanf peeks at the final new-line without reading it.
Copyright 2008 W. W. Norton & Company.
All rights reserved.
19
Chapter 3: Formatted Input/Output
How scanf Works
When asked to read an integer, scanf first
searches for a digit, a plus sign, or a minus sign; it
then reads digits until it reaches a nondigit.
When asked to read a floating-point number,
scanf looks for
a plus or minus sign (optional), followed by
digits (possibly containing a decimal point), followed by
an exponent (optional). An exponent consists of the
letter e (or E), an optional sign, and one or more digits.
%e, %f , and %g are interchangeable when used
with scanf .
Copyright 2008 W. W. Norton & Company.
All rights reserved.
20
Chapter 3: Formatted Input/Output
How scanf Works
When scanf encounters a character that cant be
part of the current item, the character is put back
to be read again during the scanning of the next
input item or during the next call of scanf .
Copyright 2008 W. W. Norton & Company.
All rights reserved.
21
Chapter 3: Formatted Input/Output
How scanf Works
Sample input:
1- 20. 3- 4. 0e3
The call of scanf is the same as before:
scanf ( " %d%d%f %f " , &i , &j , &x, &y) ;
Heres how scanf would process the new input:
%d. Stores 1 into i and puts the - character back.
%d. Stores 20 into j and puts the . character back.
%f . Stores 0.3 into x and puts the - character back.
%f . Stores 4.0 103 into y and puts the new-line
character back.
Copyright 2008 W. W. Norton & Company.
All rights reserved.
22
Chapter 3: Formatted Input/Output
Ordinary Characters in Format Strings
When it encounters one or more white-space
characters in a format string, scanf reads white-
space characters from the input until it reaches a
non-white-space character (which is put back).
When it encounters a non-white-space character in
a format string, scanf compares it with the next
input character.
If they match, scanf discards the input character and
continues processing the format string.
If they dont match, scanf puts the offending
character back into the input, then aborts.
Copyright 2008 W. W. Norton & Company.
All rights reserved.
23
Chapter 3: Formatted Input/Output
Ordinary Characters in Format Strings
Examples:
If the format string is " %d/ %d" and the input is
5/ 96, scanf succeeds.
If the input is 5/ 96 , scanf fails, because the /
in the format string doesnt match the space in the
input.
To allow spaces after the first number, use the
format string " %d / %d" instead.
Copyright 2008 W. W. Norton & Company.
All rights reserved.
24
Chapter 3: Formatted Input/Output
Confusing printf with scanf
Although calls of scanf and pr i nt f may
appear similar, there are significant differences
between the two.
One common mistake is to put &in front of
variables in a call of pr i nt f :
pr i nt f ( " %d %d\ n" , &i , &j ) ; / *** WRONG ***/
Copyright 2008 W. W. Norton & Company.
All rights reserved.
25
Chapter 3: Formatted Input/Output
Confusing printf with scanf
Incorrectly assuming that scanf format strings
should resemble pr i nt f format strings is another
common error.
Consider the following call of scanf :
scanf ( " %d, %d" , &i , &j ) ;
scanf will first look for an integer in the input, which
it stores in the variable i .
scanf will then try to match a comma with the next
input character.
If the next input character is a space, not a comma,
scanf will terminate without reading a value for j .
Copyright 2008 W. W. Norton & Company.
All rights reserved.
26
Chapter 3: Formatted Input/Output
Confusing printf with scanf
Putting a new-line character at the end of a
scanf format string is usually a bad idea.
To scanf , a new-line character in a format string
is equivalent to a space; both cause scanf to
advance to the next non-white-space character.
If the format string is " %d\ n", scanf will skip
white space, read an integer, then skip to the next
non-white-space character.
A format string like this can cause an interactive
program to hang.
Copyright 2008 W. W. Norton & Company.
All rights reserved.
27
Chapter 3: Formatted Input/Output
Program: Adding Fractions
The addf r ac. c program prompts the user to
enter two fractions and then displays their sum.
Sample program output:
Ent er f i r st f r act i on: 5/ 6
Ent er second f r act i on: 3/ 4
The sumi s 38/ 24
Copyright 2008 W. W. Norton & Company.
All rights reserved.
28
Chapter 3: Formatted Input/Output
addfrac.c
/ * Adds t wo f r act i ons */
#i ncl ude <st di o. h>
i nt mai n( voi d)
{
i nt num1, denom1, num2, denom2, r esul t _num, r esul t _denom;
pr i nt f ( " Ent er f i r st f r act i on: " ) ;
scanf ( " %d/ %d" , &num1, &denom1) ;
pr i nt f ( " Ent er second f r act i on: " ) ;
scanf ( " %d/ %d" , &num2, &denom2) ;
r esul t _num= num1 * denom2 + num2 *denom1;
r esul t _denom= denom1 * denom2;
pr i nt f ( " The sumi s %d/ %d\ n" , r esul t _num, r esul t _denom)
r et ur n 0;
}
Copyright 2008 W. W. Norton & Company.
All rights reserved.
29