0% found this document useful (0 votes)
524 views3 pages

Deviation Permit/Concession

This document is a deviation permit/concession form between a supplier and customer. It contains information identifying the supplier, customer, product affected by non-conformity such as part number and serial number. There is a description of the non-conformity including specifications not met. A disposition is provided by relevant parties such as quality and design approving acceptance with limitations or rejection. It aims to document and resolve any non-conforming products or issues between supplier and customer.

Uploaded by

Unni Alsvik
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
524 views3 pages

Deviation Permit/Concession

This document is a deviation permit/concession form between a supplier and customer. It contains information identifying the supplier, customer, product affected by non-conformity such as part number and serial number. There is a description of the non-conformity including specifications not met. A disposition is provided by relevant parties such as quality and design approving acceptance with limitations or rejection. It aims to document and resolve any non-conforming products or issues between supplier and customer.

Uploaded by

Unni Alsvik
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

DEVIATION PERMIT / CONCESSION (EXAMPLE)

SABRe: July 2012 Revision


1. DOCUMENT
IDENTIFICATION
1.1. Identification of customer:

1.3. Document Reference number :
Supplier #:

Customer # :
1.5. Category:

1.2. Identification of supplier / subcontractor: 1.4. Document Issue:

1.6. Number of Sheets:
Supplier Code:

Supplier Name:

Sheet

of

2. IDENTIFICATION OF PRODUCT AFFECTED
2.1. Model of product / program:


2.2. Part number:

Drawing Issue:

2.4. Part Serial Number / Batch / Effectivity Number
/ Lot Number:
2.5. Quantity:

2.8. Assembly Serial Number:

2.3. Part Description:

2.6. Product Number:

2.7. Work / Purchase Order Number:

2.9. Assembly Drawing Number:

3. DESCRIPTION OF NON-CONFORMITY 3.1. Detailed description of the non-conformity 5. DISPOSITION OF NON-CONFORMITY

Serial Number

Qty.

DWG. Ref.
Sheet / Loc.

Defect Characteristics / Specified Requirements
5.1. MRB / Design Decision:







Quality Decision:





NOMINAL MAX. MIN. ACTUAL DIMENSION

Previous Submissions of a similar nature:

Previous Submissions to actual item:

4. DESCRIPTION OF CAUSE / CORRECTIVE ACTION

5.2. Limitations imposed on the part:

COMPLETE BELOW FOR CATEGORY 1 CONCESSIONS ONLY
Are any of the following adversely affected?
Material Structure of Properties: Yes / No Life: Yes / No
Interchangeability: Yes / No Functioning or Reliability: Yes / No
Maintainability: Yes / No Suitable for Spares: Yes / No
HEALTH & SAFETY AFFECTED Yes / No

Effect to Customer on Cost / DELIVERY: Affected / Not Affected
6.
ORIGINATOR DESIGN QUALITY CUSTOMER 1 CUSTOMER 2
Name:

Signature:

Date:

CONTINUATION SHEET (EXAMPLE)

SABRe: July 2012 Revision
1. DOCUMENT
IDENTIFICATION
1.1. Identification of customer:

1.3. Document Reference number :
Supplier #:

Customer # :
1.5. Category:

1.2. Identification of supplier / subcontractor: 1.4. Document Issue:

1.6. Number of Sheets:
Supplier Code:

Supplier Name:

Sheet

of

2. IDENTIFICATION OF PRODUCT AFFECTED
2.1. Model of product / program:


2.2. Part number:

Drawing Issue:

2.4. Part Serial Number / Batch / Effectivity Number
/ Lot Number:
2.5. Quantity:

2.8. Assembly Serial Number:

2.3. Part Description:

2.6. Product Number:

2.7. Work / Purchase Order Number:

2.9. Assembly Drawing Number:

8. DISTRIBUTION LIST:

3. DESCRIPTION OF NON-CONFORMITY 3.1. Detailed description of the Non-conformity 5. DISPOSITION OF NON-CONFORMITY
Serial Number


Qty.


DWG. Ref.
Sheet / Loc.

Defect Characteristics / Specified Requirements

5.1. MRB / Design Decision:














Quality Decision:















NOMINAL MAX. MIN. ACTUAL DIMENSION































CONTINUATION SHEET (EXAMPLE)

SABRe: July 2012 Revision
1. DOCUMENT
IDENTIFICATION
1.1. Identification of customer:

1.3. Document Reference number :
Supplier #:

Customer # :
1.5. Category:

1.2. Identification of supplier / subcontractor: 1.4. Document Issue:

1.6. Number of Sheets:
Supplier Code:

Supplier Name:

Sheet

of

2. IDENTIFICATION OF PRODUCT AFFECTED
2.1. Model of product / program:


2.2. Part number:

Drawing Issue:

2.4. Part Serial Number / Batch / Effectivity Number
/ Lot Number:
2.5. Quantity:

2.8. Assembly Serial Number:

2.3. Part Description:

2.6. Product Number:

2.7. Work / Purchase Order Number:

2.9. Assembly Drawing Number:

You might also like