TOSHIBA-HAY-26

TMPA8891CSCNG6V12

Table of Contents
I. Overview
1-1, TMPA8891CSCNG hardware features
1-2, TV decoder
1-3 , software functions
Second, the port definition
2-1, TMPA8891CSCNG Pin Definitions Figure
2-2, TMPA8891CSCNG system configuration framework map
2-3, TMPA8891CSCNG pin and features brief
Third, the remote part of the key tables
Fourth, the key functions and operating instructions
4-1, POWER ( remote key switch key )
4-2, TV / AV (TV / AV switch key )
4-3,0 ~ 9 , - ( numeric keys )
4-4, POS +, POS-( program up / down keys )
4-5, RECALL ( back to the previous key )
4-6, PIC.MODE ( picture mode button )
4-7, VOL +, VOL-( volume up / down keys )
4-8, MUTE ( mute button )
4-9, SLEEP ( sleep timer button )
4-10, DISPLAY ( display key / child lock button )
4-11, MENU ( menu key )
4-12, SYSTEM ( sound system switching key )
4-13, AUDIO ( separate listening key )
4-14, SOUND.MODE ( sound mode button )
4-15, SELECT ( bookmark button )
4-16, SCAN ( scroll key )
4-17, GAME ( game keys )
4-18, D-MODE ( Factory key )
Five , software preset control , operation and OSD display description
5-1, OSD style and menu
5-2 , the image menu
5-3 , regular menu
5-4 , Tuning menu
5-5 Setup Menu
5-6 , Sound Menu
Six , factory menu operation method
I. Overview
TMPA8891CSCNG is the latest development of Japan's Toshiba TV combo special
decoder chip , can be used in 14 " to 29 " in the movement , and has a variety of
extensions can be implemented on a single PCB board full range from simple to highend movement. Here is TMPA8891CSCNG possess the characteristics and function of
biographies.
Page 13 of 36

TOSHIBA-HAY-26

TMPA8891CSCNG6V12

1-1, TMPA8891CSCNG hardware features

A high-speed 8 bits CPU.
2 with 8MHZ crystal minimum instruction cycle is 0.5s.
3. 2-K RAM, 48K ROM.
4.12 I / O port .
5.1 14bit PWM outputs.
6.1 7bit PWM outputs.
7.3 8bit A / D converter.
8 dedicated remote control , the count register .
9.2 16bit timer / counter.
10.2 8bit timer / counter.
11.16 interrupt sources, external 5 interrupts, internal 11 interrupts.
12.4 ROM correction mouth .
13. OSD features:
dedicated OSD clock oscillator ;
font containing a total of 384 words ;
screen display Display: 32 12 rows ;
characters : 16 18 dot matrix ;
can achieve 8 colors , three kinds of character sizes ;
translucent background display function ;
Display Position : Achieving line 256 / 512 column display step ;
character can achieve tilt, underline , etc. ;
14.1 Road YUV input, 1 S-AV input.
15 . Synchronization signal detection in two ways, namely internal registers and
external pulse count.
1-2, TV decoder
A built- notch filter, band pass filter , PIF VCO circuit .
2 Black stretch , brightness, gamma correction function .
3. PAL / NTSC / SECAM decoding circuit .
4 two channel audio input, two-way volume control output port , 1 audio output port,
enabling legislation
Stereo controls .
can achieve dual AV mono inputs , fake stereo output , saving 4052 switch ( with
Balance control ) ;
Page 13 of 36

TOSHIBA-HAY-26

TMPA8891CSCNG6V12

stereo inputs, stereo outputs , left and right channel separation is best ;
1-3 , software functions
1 Voltage Tuning : 14 bits PWM output tuner , all channels (VL, VH, UHF) control .
Frequency tuning : Optional achieve common frequency scanning mode (38M and
38.9M IF ) .
Program capacity : 0 ~ 248 0 ~ 255 programs or optional .
2 cold boot , the detection E2PROM password , if the password is wrong, re-initialize
the E2PROM.
3 can be achieved PAL, NTSC, SECAM color system automatically recognizes ;
enables PAL-N, PAL-M, NTSC color system automatically recognized.
4 selectable achieve Sound System : 4.5M, 5.5M, 6.0M, 6.5M.
5 selectable mono or stereo functions , respectively, mono and stereo volume control
to achieve internal ATT ; Toshiba can also use audio processing chip TA1343 or
TA1304 to achieve the treble , bass , balance and sound mode control .
6 respectively when no signal squelch and boot display different LOGO.
7 selectable on power status, the TV is fixed at POWER OFF, POWER ON status or
power before the memory according to the POWER OFF state to determine. When the
switch is in POWER OFF mode after the power , the machine panel keys available
program number + / - instead of POWER key to achieve power . ( Hold down the
POS + key, 3 seconds boot )
8 Road can be achieved an AV input function ; S-VIDEO, YUV input function.
9 Languages: English, French, Russian , Vietnamese, Turkish, Arabic , Farsi ,
German, Italian.
10. OSD Style: icon , background, character color is available in 8 colors arbitrarily
play with , you can achieve the translucent menu background , menu background and
icon to switch. Location can be moved up and down .
11 selectable calendar functions.
12 game function ( Sokoban ) .
13 switch selectable pull screen functionality.
14 child lock function .
15 Internal self-test signal lights and darks can enter and geometric distortion
adjustment ;
16. 50HZ/60HZ automatic identification ;
17 selectable when no signal is blue or black screen , you can choose whether the
process zapping out black.
18 The machine panel keys 7 buttons ( including POWER button ) . Sanyo, Toshiba
key lines.
Press the MENU button panel for 5 seconds to enter the auto search function .
19 uses four kinds of commercially available universal remote control codes.
(TA9028, LC6122, two kinds LC7461)
20. The program automatically searches , up / down automatic search , the frequency
tuning, jump setting , frequency setting.
21 election program number , program recall program number up / down
Page 13 of 36

TOSHIBA-HAY-26

TMPA8891CSCNG6V12

( automatically skip "Skip : Off ," the program number ) .

22 Brightness , contrast, color , sharpness , hue , volume, treble, bass, balance and
bass adjustment are achieved through IIC BUS , the 100 steps to control the amount
of adjustable " factory aging mode", which amount of control the stepper is 50.
23 one-touch image effect control ( standard , soft, bright , bright, personal settings ) .
24 The clock settings , boot time , shutdown time, the reminder time to make an
appointment , booking shows, sleep timer function .
25. Mute function. No signal automatically muted , scanners or AV / TV mute switch
automatically muted when searching .
26. TV without signal 15 minutes automatic shutdown function ( blue open ) . If you
choose a blue screen function when no signal blue screen will appear automatically . "
Debug state balance of light and dark ", " factory debug mode" and " factory aging
mode" automatic shutdown function is automatically canceled and the blue screen
function .
27 pull screen images fade -style boot function .
28. Channel editing , channel switching functions.
29 favorite channel function .
30. Separate hearing function .
31. ALC function .
32 radio.
33. ZOOM feature.
34 White Balance Auto debug instrument such as an application in the "TV IC
ADJUST" status can be automatically debug bright and dark
Balance.

Page 13 of 36

TOSHIBA-HAY-26

Two : port definition

2-1,
TMPA8891CSCNG

TMPA8891CSCNG6V12

Pin

Page 13 of 36

Definitions

Figure

TOSHIBA-HAY-26

TMPA8891CSCNG6V12

2-2 TMPA8891CSCNG
Tuner FS/HS
Page 13 of 36

TOSHIBA-HAY-26

TMPA8891CSCNG6V12

SAW filter

TC4053BP
AV1
AV SW
AV2
UTC2003
TA/1304/1343

UTC2003
A1

A2

LA78040/TDA9302
Video

Audio

Y Cb Cr

HOUT

2 in Chip

CRT

TMPA8891CSCNG
EEPROM
8K bit
LC7461
LC9012
LC6211
KEY
MATRIX

RECEIVEERMP

2-3 TMPA8891CSCNGPin and Function Descriptions

1

CPUSection Pin Definition

Page 13 of 36

TOSHIBA-HAY-26

TMPA8891CSCNG6V12

Pin

Definition

Function

U/V

L/H

KEY

Key input port;

GND

MCU digital GND;

REST

Reset pin, the power is turned on, MCU is reset;

6/7

X-TAC

Crystal connection port;

TEST

MCU factory test, is normally grounded;

5V

CCD limiter circuit power input (5V);

10

Vss

CCD limiter circuit ground;

54

GND

55

5V

56

AV SW

57

SDA

Serial data input / output ports;

58

SOL

Serial clock pulse input and output ports;

59

50/60HZ

60

VT

61

MUTE

62

TVSYNC

TV sync signal input; (can not)

63

RMT IN

Remote control signal input

64

Power

Bandswitching feet,

Oscillator circuit ground;

Oscillation circuit power; Oscillation circuit power
Output multiple control level TV/AV1/AV2----0V/2.5V/5V or
0V/25V/2.5V

50HZ is low; 60HZ is high; or UHF level is a time;

PWM 14bit output port for the tuning voltage;
Mute level control; mute output high;

Power control; initialize active low;

Port control output state as follows:

Pin1.2 band control (below the output list, "0" represents low, "1" represents high)
Port

Bands
V-L

V-H

UHF
F11:U.BAND=1

F11:U.BAND=0

Pin1

Pin2

Pin59

1F10 Page59PIN 5060UHF=1

Pin3 Description of each key range (whichever recommended voltage range of each
key center value)
KEY
Range

Off

P+

P-

V+

V-

MENU

TV/AV

POWER

0V

1.16V

1.74V

2.45V

3.17V

3.88V

4.60V

5V

(Sanyo)
Range
00.45V
1.02V
1.74V
2.45V
3.17V
3.88V
4.60V
5V
(Toshiba)
Each cold boot, if F10 page PANEL KEY DETECT = 0 software automatically recognizes Toshiba or Sanyo Line,
PANEL KEY DETECT = 1 software, the default is the Toshiba line. If PIN3 = 0, ask the customer to be careful not
to state the presence of key input power. Remote shutdown, with P +, P-key can be turned on. MENU has been
holding down for 5 seconds to enter the automatic station search state.

Page 13 of 36

TOSHIBA-HAY-26

a)

TMPA8891CSCNG6V12

Pin6Pin7 The following crystal accuracy 20PPm

Pin55 Plain wave is less than its supply voltage 0.01V (OSD clock power supply
pin)Pin56 AV/TV Switch
TV

AV1/S/DVD

AV2

External Methods

F10 PIN56 3 STATUS=0

0V

0V

5V

Pull-up resistor to
5V or 8V

F10 PIN56 3 STATUS=1

PIN56 V.CHG=0

0V

2.5V

5V

Plus 10K pull-up

resistor to 5V, pull down
10K resistor to ground

F10 PIN56 3 STATUS=1

PIN56 V.CHG=1

0V

5V

2.5
V

Plus 10K pull-up

resistor to 5V, pull
down 10K resistor to
ground

Pin59 50HZ/60HZ Switch (F10 page: 59PIN 5060-UHF = 0)

Pin59

NTSC(60HZ)

PAL(50HZ)

5V

0V

Pin61 Mute 1K pullup resistor

Pin64 Power
Remote control
Off

Boot

Power

Mute
Off

470ms

3.55S

b) Cold start
Cold start time from high to low by F11 page POWER.TIME control (0,1,2,3 seconds)

P.TIME
Turntable
700ms
Mute

4.15S
About mute settings
F8 Page
TV MUTE

No blue screen when no signal TV is not muted

No blue screen when no signal TV mute

F8Page

No blue screen when no signal is not muted AV

Page 13 of 36

TOSHIBA-HAY-26
AV MUTE

TMPA8891CSCNG6V12
1

No blue screen when no signal AV Mute

2 signal processing section:

11

TV GND

Analog circuit ground pin

12

FBP-IN

FBPFlyback pulse input terminal

13

H-out

Line drive pulse output terminals

14

H-AFC

OK AFC circuit external filter connection terminal;

15

V-SAW

Connect an external capacitor is formed sawtooth

16

V-out

Field drive pulse output

17

H-Vcc

Then DEF (deflection circuit) 8V power supply; this pin

ripple to be very;

18

TV GND

19

Cb

20

Y-IN

21

Cr

22

EXT-AU1

23

C-in

Chroma / CVBS input terminal; automatically identify S

input;

24

Sin

AV video input terminal;

25

ACL

ACL Filter

26

TV-in

TV Video signal input terminal

27

ABC-in

28

Audio-out1

Audio signal output terminal, the output audio signal to

the audio amplifier circuit;

29

Audio-out2

The audio signal output terminal 2;

30

TV-out

31

SIF OUT

Sound IF output; radio frequency output, the audio signal

output 2;

32

EXT-AU2

AUDEO2 input;

33

SIF in

Input audio signal and a second intermediate frequency

phase correction signal lines;

34

DC NF

Connect the capacitor;

35

PIFPLL

36

IF-5V

IF circuit block power supply connected to 5V;

37

S-Reg

Filter capacitors to stabilize the internal bias;

38

AU OUT1

39

IF AGC

Connect IF AGC filter;

40

IF GND

IF circuit ground terminal;

41/42

IF in

43

RF AGC

Output RF-AGC control voltage to the tuner;

44

Black Det

Connect the black level detection filter

45

Monitor out

Analog circuit ground pin

Cb weight signal input terminal;
YSignal input terminal
Cr Serving signal input terminal
AUDEO1 Enter

ABCL (color saturation, brightness limit) signal input;

PIF detection signal (composite video signal);

Connect PIF-PLL loop filter;

Audio output, no volume control;

Since the SAW filter input intermediate frequency signal;

CVBS signal from the output of the terminal;

Page 13 of 36

TOSHIBA-HAY-26

TMPA8891CSCNG6V12

46

APC fil

Color decoding circuit connected APC filter;

47

YC VCC5V1

YC power input;

48

SYNC OUT

Composite sync signal output;

49

DVCC3.3V

Digital section of the foot, plus the best filter inductor;

50

R out

R signal to the baseband output video amplifier circuit;

51

G out

G signal to the baseband output video amplifier circuit;

52

B out

B output signals to baseband video amplifier circuit;

53

GND

Analog circuit ground wire connection

AV Input and output control

Output
31PIN

Output 38PIN

F8:AUDIO IN

AV input PIN

Output 28pi

Output 29PI

0:

22PIN+32PIN

22PIN

32PIN

22PIN

32PIN
22PIN

32PIN

22PIN

22PIN

22PIN

22PIN

32PIN

32PIN

32PIN

32PIN

3, the remote part of the key tables: (remote controlled by the F8 page REMOTE control)
Key icon

HEX

Function

9028-0E

6122BF40

7461-54H7

7461-55K2

00

00

0x01

0x01

01

01

0x02

0x02

02

02

0x03

0x03

03

03

0x04

0x04

04

04

0x05

0x05

05

05

0x06

0x06

06

06

0x07

0x07

07

07

0x08

0x08

08

08

0x09

0x09

09

09

0x00

0x00

0A

0A

0x0a

0x0a

SOUND-MODE
GAME

1E

1E

ox1d

0x0b

Sound mode switch key

1D

1D

0x1c

0x0c

Game keys

SYS

0C

0C

0x1f

0x0d

System keys

RECALL

17

17

0x1a

0x0e

Look back at the key

TV/AV/DVD

0F

0F

0x0b

0x0f

AV button

MENU

1C

1C

0x0e

0x10

Main Menu key

LEFT/SELECT
PIC-MODE

1A

1A

0x15

0x11

Up Arrow/Bookmark

0E

0E

0x19

0x13

Image mode selection

DISP/LOCK

16

16

0x1b

0x14

Display key / child

lock button

MUTE

14

14

0x16

0x15

Mute button

Page 13 of 36

Numeric keys

TOSHIBA-HAY-26

TMPA8891CSCNG6V12

UP/ZOOM

19

19

0x18

0X16

Left arrow / ZOOM key

RIGHT/SCAN

1B

1B

0x1e

0x17

Right arrow /
navigation key

DOWN/A-AUDIO

18

18

0x0d

0x18

Down Arrow / separate

listening key

SLEEP

15

15

0x0f

0x19

Sleep button

P-

10

10

0x17

0x1a

CHANNEL DOWN button

P+

11

11

0x13

0x1b

CHANNEL UP button

POWER

0B

0B

0x12

0x1c

D-MODE
Vol-

2C

2C

0x11

0x1d

Factory mode key

12

12

0x14

0x1e

Volume down key

Vol+

13

13

0x10

0x1f

Volume up key

4, Key functions and operating instructions

41 POWER(Remote key switch key)
1 Function: Controls the power switch.
2 Disabled state
BUS OFF
Adjust dark bright line state balance
3Explanation
Each time you press (POWER) button on the POWER ON and
OFF transitions. Initialization, 64 pin is low boot, if
F10 page PIN64 = 1 was high boot.
After the power switch is turned TV, CPU reads data from
the EEPROM, first under F11 page 64PIN POWER ON POWER
settings to determine the state: When the value is set to
"0", after power on always on standby: Duty set to "2",
then according to the POWER memory before shutdown state
to decide; when the value is set to "1", the boot is
always in POWER ON status
In the POWER OFF state, in addition to outside the POWER
button, the available POS +, POS-key functions to achieve
power
Sleep Timer setting in the set to "POWER OFF" is cleared.
Set the Debug menu F3 in "open curt. = 1" "close curt. =
1", it is in the process of switching machines pull screen
functionality

42 TV/AV (TV / AV switch key)

1 Function: Switch TV mode, AV mode, YUV mode and FM mode
2 disabled states:
POWER OFF State
Automatic search state.
Page 13 of 36

TOSHIBA-HAY-26

TMPA8891CSCNG6V12

"BUS OFF" state.

Child Lock state
game state
3Description
button to the TVAVYUVFM conversion between
conversion process auto-mute function. If the Debug menu
F6, "CH DARK" is set to "1", then a black screen appears
during the turntable cover.
AV state, such as by POS +, POS-, 0 ~ 9 keys - keys or the
RECALL button, will not have an effect.
In DVD, FM state, such as by POS +, POS-, - keys or the
RECALL key, will not have an effect.
Debug menu F4 has a separate TV, AV2, DVD, FM switch.
Users can be combined freely. AV1 default open state.
S VIDEO The audio input can be controlled to follow F8
page S VIDEO AV1 or AV2.
4 Output Control: 56pin to AV input switching feet, by F10 page
PIN56 3 STATUS, PIN56 V.CHG control.
5OSD display (displayed for about five seconds)
12
AUTO
DK

Video
AUTO

DVD
AUTO

RADIO:
1:Through TV/AV Bottom to enter FMstation search interface. (Factory menu F4 Page
FM=1;OSD Display
FM 4
102.0 MHZ

SEARCH
MFT

FM 4
102.0 MHZ

SEARCH
MFT

FM 4
102.0 MHZ

SEARCH
MFT

2: Press the volume plus or minus key search, channel search process, the station frequency was
marked with yellow search to Taiwan was purple, if has not received Taiwan, top-to-108M stop
search, low-end to 87.5M stop station search , logo with frequency was purple. DISP exit.
3: Radio only keep 10 units, corresponding to the corresponding number from 0 to 9, the channel
search is completed, if you want to save, press 0 to 9 numeric keys, then this radio station saved to
Page 13 of 36

TOSHIBA-HAY-26

TMPA8891CSCNG6V12

the corresponding channel, and the logo was green with frequency . OSD display time is about 11
seconds.
4: To re-search, press the Menu key. Golden Quality Toshiba Health King core

43 09-- Numeric keys

1 Function: Program No. elections; plant status, 0 elections WB Debug menu; 1 ~ 9
elections F1 ~ F9 factory debug menu.
2 disabled states:
POWER OFF state

AVYUV state
Automatic search state .

BUS OFFstate

Child Lock state

game state.
3Description
Program Number 0 ~ 9 , press ( 0 to 9 ) keys to directly select . 10 to 256 programs
to choose , need to press ( --- ) key to select double-digit or three states , and then
use ( 0 to 9 ) keys to enter one hundred , ten and Ones to achieve direct elections .
If the program by program number exceeds the maximum number range 256 , the
key identifies only two.
"---" Description : Press Menu in turn , double , three states. Each losers double ,
three states are restored to a single selection . If the double- digit state lost only one
significant digit , 8 seconds after you enter the high number where the channel .
conversion process auto-mute function .
After zapping , the current program number and produce a corresponding change in
the previous program number , the result is automatically written to the EEPROM.
If you select the same number with the current program , then re- read from the
EEPROM of the current program information .
selected for fine-tuned programs , program number will be purple in the OSD
display to show the difference.
jumping red channel , set a bookmark channel is yellow.
In Channel Edit menu, available from 0 to 9 keys to set the desired program
number to make adjustments .
When in a dim light line equilibrium , 1,4 ; 2,5 ; 3,6 ; 7,8 keys available Red /
Green / Blue adjustment of bias and BRTS , other keys do not work.
Factory 0 ~ 9 to enter 10 to adjust the menu items ( in the factory debug state by
password " 2483 ", the F8 ~ F15 debugging options open ) .

4 OSD display ( displayed for about five seconds ) NOTE: Wait digit input , after 8
seconds if no other digital input ,
then directly into the two channels
12
AUTO
Page 13 of 36

2-

TOSHIBA-HAY-26

TMPA8891CSCNG6V12

44 POS+POS- ( program up / down keys )

1 Function : Program increases or decreases ; menu option selection ; factory debug menu
item selection .
2 prohibit state

AVYUV State.
Automatic search state .

BUS OFFState

dim light line state equilibrium

Child Lock state.
3Description
Use the POS + / POS- change program number , it will automatically skip "SKIP
ON" program number .
If you hold down the key, the program number on a continuous increment or
decrement .
If all programs are set to "SKIP ON", then press the POS + / POS- key can only be
fixed election to the number "0" programs. If there is only one program set to
"SKIP OFF" state, then press the POS + / POS- key to select fixed on to this unique
program .
conversion process auto-mute function .
If you press the POS + keys to reach saved Taiwan 's largest program number ,
press POS + key to jump to saved station smallest program number ; such as by
POS- keys to reach a saved station smallest program number , press POS- key to
jump to the largest program saved station number.
After the conversion is complete , the current program number and program
number of the last message will change , results are automatically stored in the
EEPROM.
Full screen menu , POS + and POS- key is used to select menu options.
in the calendar view state, with POS + and POS- keys to change the year value.

45 RECALL
1 F1F15
2
POWER OFF
BUS OFF
Page 13 of 36

TOSHIBA-HAY-26

TMPA8891CSCNG6V12

AVYUV


3

EEPROM

4OSD OSD

46 PIC.MODE
1
2
POWER OFF
BUS OFF




3
EEPROM STANDAR MILD VIVID
DYNAMIC
PERSONAL
EEPROM

PIC.MODE

5OSD 5

47 VOL+VOL- /
1

2
Page 13 of 36

TOSHIBA-HAY-26

TMPA8891CSCNG6V12

POWER OFF
BUS OFF


3
/
/
100 VOL+
0 VOL-
VOL-
VOL+



F1F15
4OSD 3

---------------------------------- 50

48 MUTE
1

2
POWER OFF
BUS OFF


3
MUTE MUTE
POWER VOL+
OSD
OSD
F1F15

FACTRY1

Page 13 of 36

TOSHIBA-HAY-26

TMPA8891CSCNG6V12

49 SLEEP
1
2
POWER OFF
BUS OFF




3

OSD
120 10
OFF-TIME
4OSD

410 DISPLAY /
1 AV DVD
LOGO
2
POWER OFF
BUS OFF


3
OSD

10

4OSD
Page 13 of 36

TOSHIBA-HAY-26

TMPA8891CSCNG6V12

411 MENU
1
TV MENU 10
2
POWER OFF
BUS OFF


3MENU
MENU

AV
OSD
OSD MENU
4
MENU POS+/POS-

VOL+/VOL-

412 SYSTEM
1
2
POWER OFF
AVYUV
BUS OFF



3
BGIDKM 1 SYSTEM

Page 13 of 36

TOSHIBA-HAY-26

TMPA8891CSCNG6V12

AV YUV SYSTEM

413 AUDIO
1 F10:REMOTE KEY LOVE1/
F10:REMOTE KEY LOVE0

2
POWER OFF

BUS OFF



3

OSD
TV TV 09 - -POS+
RECALL AV
DVD AV YUV
TV/AV
09 - -POS+POS- RECALL
AV YUV
4OSD

414 SOUND.MODE
1 TA1304 TA1343 (F8: SOUND IC=2 3)

TA1304
TA1343 1 2

2
POWER OFF
BUS OFF



Page 13 of 36

TOSHIBA-HAY-26

TMPA8891CSCNG6V12

415 SELECT
F10:REMOTE KEY LOVE1
F10:REMOTE KEY LOVE0

2
POWER OFF
BUS OFF



AVYUV
3

8

416 SCAN
F10:REMOTE KEY LOVE1
F10:REMOTE KEY LOVE0

2
POWER OFF
BUS OFF



AVYUV

3

417 GAME

2
POWER OFF
BUS OFF


Page 13 of 36

TOSHIBA-HAY-26

TMPA8891CSCNG6V12

4 MENUP+P-V+V-MUTE

418 DMODE
1
2
POWER OFF
BUS OFF


3
FACTORY

419 ZOOM
1 F10:REMOTE KEY LOVE0
9028
F10:REMOTE KEY LOVE1

OSD

5-1OSD F7
OSD halftone:

PICTURE
CONTRAST
BRIGHT
COLOR
SHARP
NOISE REDU.

50
50
50
50
ON

MENU
CH-
V+V-
Page 13 of 36

TOSHIBA-HAY-26

TMPA8891CSCNG6V12

MENU 5

5-2
MENU .MENU
PH+PH- V+V-

BRIGHT
CONTRAST
COLOR
TINT
SHARP
NOISE.REDU

PICTURE
50
50
50
00
50
OFF

10 MENU
V+V-CH+CH-

5-3
MENU

TIMER
CLOCK
ON TIMER
OFF /ONCE/EVERY
POS
0FF TIMER
OFF /ONCE/EVERY
POSITION

039
000
0
000
39

CH+CH-V+ V-
MCU

600 CCTV-1
CH+CH- 24 V+V-
CH+ CH-
Page 13 of 36

TOSHIBA-HAY-26

TMPA8891CSCNG6V12

V+ V- CH-CH+ V+V-
600 CCTV-1 10

5-4
MENU

POSITION
BAND
MFT
SEARCH
AUTO TUNE

SEARCH
39
VHFL

..

VHFLVHFHUHF
V+V- FS

MFT V+\V-

CH+CH-
V- V-
V+
EROM
VHFL UHF ,

SEARCH

POSITION55

STOP

BANDUHF
Page 13 of 36

TOSHIBA-HAY-26

TMPA8891CSCNG6V12

V+ 0
OFF AUTO VHFL
UHF OFF
EROM

AUTO TUNE
STOP

POSITION05
BANDUHF

V- 0 POWER CPU
249
0
CH_ CH+

POS EDIT

CURRENT POS
TARGET POS
CONFIRM
SKIP
SOUND
SEARCH

055
000
OFF

Page 13 of 36

TOSHIBA-HAY-26

TMPA8891CSCNG6V12

CH+CH-
CH-
V+ OK
CH+CH-
DISP

CH+CH- V+V-
CH+CH- V+V-
CH_ CH+
MENU DISP

5-5

LANG .
TEMP.
ALC
CALENDAR
CURTAIN
SCREEN P.

2
3
4
5

FUNCTION
ENGLISH
STANDARD
OFF
OFF
OFF

CH+ V+//
/
,
ALC
CH+ V+ V+V-
Page 13 of 36

TOSHIBA-HAY-26
6
7

TMPA8891CSCNG6V12

CH+CH-

5-6
MENU

SOUND
BASS
TREBLE
BALANCE
S .WOOFER
S .WOOFER

SOUND
30
40
60
00
OFF
28

In this menu , you can right sound volume, treble , bass , balance , bass adjust the sound , adjust
the way no longer tired .

6: Factory Menu Operation Method

Aging Mode
1) Press the "D-mode" directly into the aging mode , the screen displays "factory".
Press the "DISP" exit "factory", enter the white balance mode.
2) Press the "MENU" button to the tuning menu. Press "CH-" key to select the channel
adjusted ; press " 2483 ", " 6483 ", " 6568 " into the aging mode.
In the factory mode or aging mode, press the "SYS", " Audio Mode ", "sleep" can be
directly adjusted data , the screen displays the corresponding menu + factory, press
"MENU" to display the main menu to adjust the data , all analog to 50 as a unit step ,
station search speed is doubled . If you exit the Data Debug , press "DISP" to exit the
screen displays only "factory".

White Balance Mode

3)
4)
5)
6)

In the aging mode, press "D mode " Exit "factory", enter the white balance mode.
Press "D Mode" key twice ( factory key ) to enter the white balance mode.
In the factory mode , press 0 to enter the white balance mode.
In the white balance mode, press "MUTE", there may be horizontal bright line , this
time with "1,4" RCUT, with " 2,5 " key to bring BCUT; with " 3,6 " key to bring
GCUT;

enter the factory mode

A, the user remote control:
1) advanced aging mode in the aging mode, press the "DISP" exit "factory", enter
the white balance mode.
Page 13 of 36

TOSHIBA-HAY-26

TMPA8891CSCNG6V12

2) In the white balance mode, press the number keys 1,2,3,4,5,6,7, DISP enter the
factory mode.
B according to "D Mode" key three times ( factory key ) to enter the factory Debug
menu.
enter the factory mode F8 ~ F15 page
Before seven in factory mode , press " 2483 ", " 6483 ", " 6568 " into the F8 page . Open
simultaneously F8 ~ F15 page . Press the Mute key forward flip menu, press the return key
reverse flip . Press the number keys to enter the factory mode 1,2,3,4,5,6,7,8,9 F1 ~ F9 pages.
Press 0 to enter the white balance mode.

exit factory mode

1Press the "DISP" to exit the factory menu .
1 Press the power switch, you can exit the factory state. But then boot to retain
"factory" mode.
Factory
debugging
Shortcut Description

Enter the factory mode, some of the keys on the remote control function will change to
accommodate the needs of production debugging .
1Press the Mute key forward flip Debug menu , press the return key reverse flip Debug
menu.
2 on the remote control "CH +", "CH-", select the menu item, press "VOL +", "VOL-"
to change the setting value.
3 Press the "SLEEP" display chip six kinds of test signals
PAL System
Black : look dark balance .
White : Look bright balance.
Box : tune PAL linear , horizontal and vertical pieces . Grid side just gone
up and down about the most for the best.
Cross: adjusting the horizontal and vertical center value of the NTSC
system.
NTSC System
Cross: adjusting the horizontal and vertical center value of the NTSC
system.
Box: tune PAL linear, horizontal and vertical pieces. Grid side just gone up
and down about the most for the best.

RC

110

255

GC

110

255

BC

110

255

GD

60

127

BD

72

127

UBLK

15

Page 13 of 36

TOSHIBA-HAY-26

TMPA8891CSCNG6V12

VBLK

15

SRY

SECAM R

15

SBY

SECAM B

15

Press the "MUTE", there may be horizontal bright line, this time with "1,4" RCUT, with "2,5" key
to bring BCUT;
With "3,6" key to bring GCUT; Press "TV / AV" button to enter the "BUS OFF" state.

1 PAL ( PAL )

H.PHASE

50Hz

18

31

V.SIZE

50Hz

20

63

V.POS

50Hz

02

15

V.LIN

50Hz

15

31

V.SC

50Hz

15

31

HBOW

HPARA

H.BLK.RIGHT

H.BLK.LEFT

NTSC ( NTSC )

NT.H.PHASE

60Hz

10

20

NT.V.SISE

60Hz

10

20

NT.V.POS

60Hz

11

20

NT.V.LIN

60Hz

10

20

NT.V.SC

50Hz

10

31

NT.HBOW

NT.HPARA

V.BLK.TOP

V.BLK.BTM

SUB.CONT

15

15

SUB.BRIGHT

-63~63

SUB.COLOR

10

-128~+127

64

127

S.SUB.COLOR SECAM

Page 13 of 36

TOSHIBA-HAY-26

TMPA8891CSCNG6V12

RF.AGC

30

63

BACKGROUND

0 1

BACK.COLOR 0:

POW.CONT

15

LOCK

LOGO MOVE

LOGO 0 1

3 OSD1

MENU BACK

0:

1:

MENU ICON

0:

1:

OPEN CURT.

0:

1:

CLOSE CURT.

0:

1:

CALENDER

0:

1:

P.ON.LOGO

LOGO

0:

1:SET

NO.SG.LOGO

LOGO

0:

1:SET

OSD.CONT

0:95IRE1:60IRE2:70IRE3: 80IRE

0 1

ANALOG ADJ

TV

TV

0:

1:

AV2

AV2

0:

1:

YUV

YUV

0:

1:

FM

FM

BG

BG

DK

DK

0:
0:
0:
0:
0:

1:
1:
1:
1:
1:

FM BAND 0: BG\DK\I 1:

5:

LEFT

16

63

RIGHT

125

255

Page 13 of 36

TOSHIBA-HAY-26

TMPA8891CSCNG6V12

TOP

24

63

BOTTOM

180

255

CURT.WAIT.TIME

10

188

CURT.CENT

160

255

CURT.STEP

16

OSD.H.POSI.

40

127

OSD.V.POSI

18

47

ZOOM

15

6 OSD2

POS.TIMER

(1255),
1, 8MS

32

255

CH DARK

FRANCE

0:

1:

RUSSA

0:

1:

TVIET

0:

TURKCE

0:

1:

0:

1:

0:

1:

1:

0:

GERMAN

ITALIAN

0:

1:
1:

0:

1:

7 OSD3

UP BOX BACKGROUND

15

15

UP BOX MOVE

15

15

UP ICON BACKGROUND

07

UP ICON MOVE

07

DOWN BOX BACKGROUND

15

15

DOWN BOX MOVE

11

15

07

DOWN TEXT BACKGROUND

DOWN TEXT MOVE

4
07
In this menu, press the menu button, the menu will appear with a blue screen, and the Display on
the menu FACTORY, can be directly used P +, P-, V +, V-button on the menu adjust the color, so
WYSIWYG. After adjusting Press DISP to exit.

8 1

Page 13 of 36

TOSHIBA-HAY-26

TMPA8891CSCNG6V12

S. AUDEO S-video input, audio follow AV1, or AV2.

0: AV1 1: AV2.

AUDEO IN Audio input combinations

0: Stereo 1:32 PIN 2: 22PIN

TV.MUTE

TV no signal mute control

0: TV is not muted 1: Mute

AV.MUTE

AV mute control no signal

0: AV is not muted 1: Mute

Balancing central value

64

114

Remote control code selection 0:9028-0E0E

1:6122-BF40
2:7461-611C 3:7461-1AA1 4:AUTO

ALC GAIN Automatic volume control level 0:off ,11.1Vpp, 21.6Vp-p, 32.3Vp-p
Sound IC

Sound IC Selection
0: Off 1: Balance 2: TA1343 3: TA1304

S.WOOFER Subwoofer switch 0: OFF 1: ON

BALC
REMOTE

9
Display

Min

Middle value

Maximum

Data Maximum

95

127
127
127
127
63
127
127
127
127

BRIGHT

Brightness

64

69

COLOR

Color

15

64

TINT

Hue

40

58

127
53
69
66

SHARP

Sharpness

32

32

VOLUME

Volume

64

96

BASS

Bass level

24

72

TREBLE

Treble level

40

WOOFER

Subwoofer level

114

127
X
X
X

CONTRAST Contrast

10 Chip pin state control

Page 13 of 36

TOSHIBA-HAY-26

TMPA8891CSCNG6V12

PANEL KEY DETECT Power button board level is detected

0: Automatic identification 1: Default Toshiba

REMOTE KEY LOVE

Is there a favorite channel function keys

0: make the arrow keys one: as bookmarks,
browsing, listening alone

23PIN

TMPA889X chrominance signal when the input or

CVBS input
0: chrominance signal 1: CVBS

59PIN 5060-UHF

0:50 / 60HZ detection 1: UHF band when the output

is high

31PIN

31 pin Function
0SIF OUT 1: AU OUT 23:NO USE

56PIN 3 STATUS

56 pin function, whether the Tri-State

0: high and low level 1: High-level low three kinds

56PIN V.CHG

56 pin function, TV/AV1/AV2 Tri-State Voltage

Selection 0 0V
2.5V
5V
1:0V
5V
2.5V

64PIN

64 pin function, select On Level

0: Low Power, 1: High Power

VIF

IF images 0: 38M 1:38.9M 2:45.75M

VIDEO DSP USB

AV2 display USB

11 Function Control

V.AGC.DC

Field AGC power supply options

0: External 1: Internal

PIF.LEVER

CVBS Output amplitude control

00:1.1V
CVBS.PASS
POS.NO.

32.4V

CVBS output is band-pass filter 0: PASS

PASS
Select the number of channels 0:248

TUNING.MODE Channel search mode 0:VS

1: NO
1:256

1:FS

TUNER.TYPE Select tuner Frequency Synthesizer

0:38 M 1:38 A 2:38.9 M 3:38.9 A
POWER.TIME

Cold start power pin waiting time

0:0 s, 1:1 s, 2:2 s, 3:3 s

STANBY.MODE Power supply pin memory state

0: Memory status, 1: are the Standby state, to remote
boot
2: Do not remember the last switched on,
automatically activated
U.BAND

1.2 pin U-band tuner level selection 0:00 1:11

Page 13 of 36

TOSHIBA-HAY-26

TMPA8891CSCNG6V12

12 With ABCL, brightness control on the register

Display

Chinese description

Recommended Maximum

ABL.POINT

Automatic brightness control start 0:0V,1:-0.2V,2:0.3V,3:-0.4V

ACL.ST

Automatic contrast control start 0:0V,1:-0.2V,2:0.3V,3:-1V(OFF)

ABL.GAIN

Automatic brightness control gain 0:-0.2V,1:0.35V,2:-0.5V,3:-0.65V;

YPL

Peak brightness 0:OFF

BS.SW

Black stretch switch 0:OFF

BS.START

1:105IRE

Black stretch starting point0 30IRE 1

40IRE250IRE375IRE

Y.GAMMA

Brightness gamma correction 0 OFF 1

78IRE268IRE358IRE

P.OFF.RGB

Off eliminate light

0: Off 1: Consumer bright RGB / Cut to 0
2: eliminate bright RGB / Cut to FF

1:105IRE

SHARP.BLANCEVertical lines around the crochet balance adjustment

13 The registers associated with the color control

Display

Chinese description

Recommended

Maximum

TV/PAL

TV/NTSC

AV

DVD

DEMO.PHASEColor
demodulation
amplitude and phase

P/N ID

Color Sensitivity

KILLER.OFF

Achromatic
switching

SYS.SHARP

SHARP
values
different states

37

37

37

37

63

Y.DELAY

Luma delay

circuit
of

Y DELAY TIME Brightness delay time

0:0ns 1:40ns 2:80ns 3:120ns 4:160ns 5:200ns

Page 13 of 36

6:240ns 7:280ns

TOSHIBA-HAY-26

TMPA8891CSCNG6V12

14
Display

Chinese description

recommend

Maximum

BG

DK

S.TRAP F0

The width of the notch center frequency 08

sound

08

08

03

15

S.TRAP Q

The sound trap Q value

S.TRAP GD

Sound trap GD value

STANDARD

Standard state contrast, brightness, color, 50

sharpness

50

50

50

100

MILD

Soft state of contrast, brightness, color, 40

sharpness

40

40

60

100

VIVID

Gorgeous state of contrast, brightness, color, 70

sharpness

60

60

40

100

DYNAMIC

Dynamic Status contrast, brightness, color, 80

sharpness

70

50

30

100

S.TRAP HP/LP Sound trap HP / LP value

15 Line synchronization parameter settings

Display

Chinese description

recommend

Maximum

SYNC.DET

OK synchronous detection mode 0: Internal

Synchronization
1:
External
Synchronization

SYNC.SEARCH

Internal synchronization station search

when the sync tip detection method

14

15

SYNC.BB

Blue Screen of internal synchronization, the

synchronization header detection methods

14

15

BB.COUNT

Blue Screen of internal synchronization, the

synchronization head count

04

255

PYNX

External synchronization status line sync

pulse count max

46

63

PYNN

External synchronization status line sync

pulse count minimum

24

63

PYXS

External synchronization status line

synchronous counter maximum search

34

63

PYNS

External synchronization status line

synchronization Count Minimum search

30

63

Page 13 of 36

TOSHIBA-HAY-26

TMPA8891CSCNG6V12

16 unusual adjustments1
Display

Chinese description

recommend Maximum

HAFC

AFC gain

255

VCEN

Center of the field values, positive and negative power

supply to be effective

3F

NOISE.SW

Noise detection switch 0: OFF 1: ON

NOISE.COUNT

Testing to confirm the need to remember is the noise

value of the number

31

255

SEARCH1

Automatic station search algorithm 10: Fast 1: Slow

SEARCH2

Automatic station search algorithm 20: fast 1: Slow

NOISE

Detecting whether noise is compared with the value of

the

15

UCOM

Select input mode for test pattern from UCOM

CH SHADE

Turntable fade switch 0: OFF 1: ON

DSP POSITION Logo display position 0: Right 1: Left

17 Unusual adjustments 2
Display

Chinese description

recommend

Maximum

HVBSW

H / V Blanking on / OFF switch

0: OFF 1: ON

CTRPQ

C-Trap Q
0:low

1:high

AFTCH

AFT check 0: either TV or Av have checked

AFT
1: Only the TV under examination AF

SEAUD

Automatic station search when the search

signal no signal is down
0: Down Search Signal 1: Not found

BYRGB

Black Guan Y / RGB selection

0: OFF Y 1: Off RGB

UV.SW

UV SW

CTRAP

C trap mode selection

00:01 interlocking video sw
10 off
11on

YUVDIS

YUV display status 0: YUV 1: DVB

TINTP

TINT,polarity,1:Positive,polarity 0:Negative

0:Cb/Cr

1:U/V

Page 13 of 36

TOSHIBA-HAY-26

TMPA8891CSCNG6V12

18 Unusual adjustments 3
Display

Chinese description

recommend Maximum

VFREQ

No signal field frequency setting 0: Auto 1:313

OVMO

Overmodulation switch 0: Normal setting 1: ON

AFT SENS.

AFT sensitivity 0: wide (250hz) 1: normal (83hz)

NYBUSW

Nyquist Buzz reducer sw 0: ON, 1: OFF

SHARPF0

Select the center frequency clarity 0:2.75 MHz, 1:4

MHz

VCOADJ

Changing table and whether to adjust VC0: changing

table and adjust the VCO, 1: do not adjust

HSTOP

power on H STOP 0:H STOP=01:H STOP=1

SYNC.SEP.

Line sync separation degree 0:40% 1:50%

SYNC.SLI.

Weak signal synchronization level 0; Standard 1: Low

SYNC.SKEW

Tilt detection line sync mode 0:30% 1:50%

19 SECAM Adjustments
Display

Chinese description

recommend Maximum

SECAM.GP

00:normal 01:+200ns 10:center 11:-200ns

SECAM.INT

secam inhibit swich 0:detecting

SECAM.ID

SECAM identification sensitivity 0: normal 1: low

SECAM.BEL.SW

sel secam bell filter bandwith 0: bell filter 1:boost

mode

SECAM.ID.MOD

select secam ident mode 0:H ID 1:H+V ID

1:inhibit

SECAM.BLACK.SW select YS-SW mode 0:normal operation

1:secam black level alignment mode
SECAM.BELL

select secam bell filter Q 0:low

1:high

LOGO LOGO setting: AV, press the numeric key "2483", "6483", "6568" into the LOGO setup
menu.
By the MENU key select items. Press P +, P-, V +, V-key parameter setting LOGO.

Page 13 of 36

TOSHIBA-HAY-26

TMPA8891CSCNG6V12

Adjustment is completed, DISP button to exit.

Page 13 of 36