The VDTU2-104 and VDTU2-204 are VDSL2 modems that can transmit data at up to 200 Mbps over existing copper telephone lines. They support technologies like voice, video, and data transmission. VDSL2 allows operators to cost-effectively upgrade existing DSL infrastructure and transmit asymmetric or symmetric data at longer distances than previous DSL standards. The modems have 4 Ethernet ports and a POTS/ISDN splitter port to transmit both data and telephone signals over a single line.
The VDTU2-104 and VDTU2-204 are VDSL2 modems that can transmit data at up to 200 Mbps over existing copper telephone lines. They support technologies like voice, video, and data transmission. VDSL2 allows operators to cost-effectively upgrade existing DSL infrastructure and transmit asymmetric or symmetric data at longer distances than previous DSL standards. The modems have 4 Ethernet ports and a POTS/ISDN splitter port to transmit both data and telephone signals over a single line.
The VDTU2-104 and VDTU2-204 are VDSL2 modems that can transmit data at up to 200 Mbps over existing copper telephone lines. They support technologies like voice, video, and data transmission. VDSL2 allows operators to cost-effectively upgrade existing DSL infrastructure and transmit asymmetric or symmetric data at longer distances than previous DSL standards. The modems have 4 Ethernet ports and a POTS/ISDN splitter port to transmit both data and telephone signals over a single line.
The VDTU2-104 and VDTU2-204 are VDSL2 modems that can transmit data at up to 200 Mbps over existing copper telephone lines. They support technologies like voice, video, and data transmission. VDSL2 allows operators to cost-effectively upgrade existing DSL infrastructure and transmit asymmetric or symmetric data at longer distances than previous DSL standards. The modems have 4 Ethernet ports and a POTS/ISDN splitter port to transmit both data and telephone signals over a single line.
Copyright:
Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online from Scribd
Download as pdf or txt
You are on page 1/ 1
xDSL Series
Fiber Series VDSL Family VDSL2 modem
VDTU2-104, VDTU2-204 2
xDSL xDSL The VDTU2-104 / VDTU2-204 are VDSL2 (Very-High-Bit-Rate Digital Subscriber Line 2) ITU-T G.993.2 standard modems used as an access technology that
Series exploits the existing infrastructure of copper wires that were originally deployed for POTS services. They can be deployed from central offices, from fiber-fed cabinets
Series located near the customer premises or within buildings. ITU-T G.993.2 VDSL2 is the newest and most advanced standard of DSL broadband wire line communications. Designed to support the wide deployment of "triple play" services such as voice, video, data, high definition television (HDTV) and interactive gaming, VDSL2 enables operators and carriers to gradually, flexibly, and cost efficiently upgrade existing xDSL infrastructure. ITU-T G.993.2 (VDSL2) is an enhancement to G.993.1 VDSL that permits the transmission of asymmetric and symmetric (Full-Duplex) aggregate data rates up to 200 Mbit/s on twisted pairs using a bandwidth up to 30 MHz. VDSL2 deteriorates quickly from a theoretical maximum of 250 Mbit/s at 'source' to 100 Mbit/s at 500m and 50 Mbit/s at 1km. From 1km
PDH Series and beyond, VDSL2 degrades at a much lower rate, performing the same as ADSL2 but still outperforming standard VDSL. This means that VDSL2-based systems, unlike VDSL1 systems, are not limited to short loops or MTU/MDUs only, but can also be used for medium range applications
Features Specifications Standard IEEE 802.3, IEEE802.3u, ETSI, ITU, ANSI VDSL2 Very High-speed Digital Subscriber Line version 2 Ports VDSL2 Interface:
IP Networking (VDSL2) modem Connector: RJ11
4 ports 10/100BaseTX LAN VDTU02-104 for Master modem
VDTU02-204 for Slave modem Supports Router with firewall or Bridge mode POTS/ISDN Splitter port RJ11 Bandwidth control Ethernet Interface: POTS/ISDN splitter on board Connector: RJ45 Auto speed on VDSL2 port 4 port 10/100Base-TX Ethernet Bridge & Router
Tester Series Supported protocols: HTTP, TFTP, PPPoE, uPnP, Performance 100Mbps / 300meter Management Console port:RS232 NAT/DHCP/DMZ Support firmware upgradeable Supports loopback test LEDs Power, Ethernet Link/Act, DSL link Supports SNR indication Power DC 12V in
Surge protection on DSL port Power Consumption < 5W
Dimensions 184 x 146 x 40mm
Converter Series Interface (D x W x H)mm Weight 650g Temperature 0~50°C (Operating) ,0~70°C (Storage) Humidity 10~90% non-condensing Application Certification CE, FCC, RoHS MTBF 35,000 hours
Management
Ordering Information VDTU2-104 VDSL2 4-port Ethernet 10/100Base-TX for local side VDTU2-204 VDSL2 4-port Ethernet 10/100Base-TX for remote side
