PCB relays

Single relays
Mini power relay K (open and sealed)
Please observe the disclaimer.
100
Powertrain
Systems
Chassis
Systems
Safety Security Body Driver
Information
Convenience
Car Industry
Truck
Industry
Other
Industry
72A_3d01/ 72C_3d01
Catalog 1308028
Issued 01-05
Description
Features
- 60% smaller volume than
power relay K
- High switching capacity
- Small footprint, minimal
space requirements
Typical applications
- Lamp control circuits
- Indicator control circuits
- Sunroof motors
- Window motors
- Immobilizers
- Central doorlock etc.
- Also available for 42 V
applications
Please contact Tyco Electronics
for relay application support.
Design
Open or sealed;
sealed version: sealing in accordance
with IEC 68;
immersion cleanable: protection class
IP 67 to IEC 529 (EN 60 529)
Weight
Approx. 0.28 oz. (8 g) open version
Approx. 0.32 oz. (9 g) sealed version
Nominal voltage
12 V or 24 V;
other nominal voltages on request
Terminals
PCB terminals, for assembling in
printed circuit boards
Terminals in grid 0.049 0.050"
(1.25 1.27 mm)
Conditions
All parametric, environmental and
endurance tests are performed
according to EIA Standard RS-407-A
at standard test conditions unless
otherwise noted:
23 C ambient temperature,
20-50% RH, 29.5 1.0" Hg
(998.9 33.9 hPa).
Please also refer to the Application
Recommendations in this catalog
for general precautions.
Disclaimer
All technical performance data apply to the relay as such, specific conditions of the individual application are not considered. Please always check the suitability of
the relay for your intended purpose. We do not assume any responsibility or liability for not complying herewith. We recommend to complete our questionnaire and
to request our technical service. Any responsibility for the application of the product remains with the customer only. All specifications are subject to change without
notification. All rights of Tyco are reserved.
http://www.Datasheet4U.com
PCB relays
Single relays
Mini power relay K (open)
Please observe the disclaimer.
101
Catalog 1308028
Issued 01-05
Dimensional drawing
Open version
Terminals tinned
additional tin tops
Tyco0595-Z
.138
(3.5)
.689 .020
(17.5 0.5)
.138 .012 *)
(3.5 0.3)
.157 .039
(4 1)
.035 .006
(0.9 0.15)
.008 .055
(0.2 1.4)
.374 .008
(9.5 0.2)
.264 .012
(6.7 0.3)
.240 .012
(6.1 0.3)
.512.008
(13.0 0.2)
.591 .039
(15 1)
.571 .016
(14.5 0.4)
*)
max .039 inch (1 mm)
ECR2209-U
.033 .002
(0.85 0.06)
4 x .033 .002
(0.85 0.06)
.033 .002
(0.85 0.05)
.030 .002
(0.75 0.06)
.022 .002
(0.55 0.05)
View of the terminals (Bottom view)
Tyco0596-8
.039 .018
(1 0.45)
.091 max.
(2.3 max.)
.056 .010
(1.42 0.25)
.047 .016
(1.2 0.4)
.512 +.004
(1.3 +0.1)
.049 .050
(1.25 1.27)
Mounting holes
View of the terminals (Bottom view)
Grid 0.049 0.050" (1.25 1.27 mm)
PCB relays
Single relays
Mini power relay K (sealed)
Please observe the disclaimer.
102
Catalog 1308028
Issued 01-05
Dimensional drawing
Sealed version
Terminals tinned
The Nipp-off-pin may be
removed after soldering
and washing
(for ventilation)
additional tin tops
Nipp-off-pin
Tyco1112-3
.756 .012
(19.2 0.3)
.118 .012 *)
(3 0.3)
.012 .008
(0.3 0.2)
.018 .016
(0.45 0.4)
.579 .012
(14.7 0.3)
.665 .012
(16.9 0.3)
*)
max .039 inch (1 mm)
ECR2210-X
.033 .002
(0.85 0.06)
.181 .008
(4.6 0.2)
.033 .002
(0.85 0.06)
2 x .033 .002
(0.85 0.05)
.079 .004
( 2 0.1)
.075 .008
(1.9 0.2)
.354 .008
(9 0.2)
.030 .002
(0.75 0.06)
4 x .022 .002
(0.55 0.05)
View of the terminals (Bottom view)
ECR0598-P
.106 .016
(2.7 0.4)
.094 .024
(2.4 0.6)
.512 +.004
(1.3 +0.1)
.049 .050
(1.25 1.27)
Mounting holes
View of the terminals (Bottom view)
Grid 1.25 1.27 mm
Assembly and
positioning aid
PCB relays
Single relays
Mini power relay K (open and sealed)
Please observe the disclaimer.
103
Catalog 1308028
Issued 01-05
Contact data
Typical areas of application
Contact configuration
Circuit symbol
(see also Pin assignment)
Rated voltage
Rated current at 85 C
Contact material
Max. switching voltage/power
Max. switching current
1)
On
2)
Off
Min. recommended load
5)
Voltage drop at 10 A (initial)
for NC/NO contacts
Mechanical endurance (without load)
Electrical endurance
(example of resistive load)
1)
The values apply to a resistive load or inductive load with suitable spark suppression.
2)
For a load current duration of maximum 3 s for a make/break ratio of 1:10.
3)
Corresponds to the peak inrush current on initial actuation (cold filament).
4)
At 50 % ON period
5)
See chapter Diagnostics in our Application Recommendations on page 18.
Resistive / inductive loads Indicator lamps
Make Changeover Double Make Double
contact/ contact/ make contact/ contact/ make contact/
Form A Form C Form U Form A Form U
12 V
10 A 5 A/10 A 2 x 6 A 5 A 2 x 5 A
AgNi0.15 AgSnO2
See load limit curve
NC/NO
60 A 12 A/60 A 2 x 40 A 60 A
3)
120 A
3)
20 A 10 A/20 A 2 x 20 A 6 A 12 A
1 A at 5 V
Typ. 50 mV, 300 mV max. Typ. 2 x 50 mV, 300 mV max. Typ. 150 mV, 300 mV max.
> 10
7
operations
> 2 x 10
5
operations > 1,5 x 10
6
> 1.5 x 10
6
10 A, 13.5 V operations operations
up to 3 x 21 W up to 6 x 21 W
3 5
4
Load limit cur ve
Pin assignment (open and sealed)
1 make contact/ 1 double make contact/ 1 changeover contact/
1 form A 1 form U 1 form C
Load limi
curve 1
Load limi
curve 2
Load limi
curve 3
Tyco
Load limit curve 1
^
= safe shutdown,
connected as form X, load on pin 5
and 7
Load limit curve 2
^
= safe shutdown,
no stationary arc / make contact
Load limit curve 3
^
= arc extinguishes
during transit time (changeover contact)
Load limit
curve 1
Load limit
curve 2
Load limit
curve 3
Tyco0626-Y
PCB relays
Single relays
Mini power relay K (open and sealed)
Please observe the disclaimer.
104
Catalog 1308028
Issued 01-05
Coil data
Available for nominal voltages 12, 24 V
(other coils on request)
Nominal power consumption of the unsuppressed coil at nominal voltage 1.1 W
Test voltage winding/contact 500 VACrms
Maximum ambient temperature range
1)
40 to + 85 C
Operate time at nominal voltage
2)
Typ. 3 ms
Release time at nominal voltage Typ. 1.5 ms
1)
See also operating voltage range diagram
2)
Measured at nominal voltage without coil suppression unit
N.B.
A low resistive suppression device in parallel to the relay coil increases the release time and reduces
the lifetime caused by increased erosion and/or higher risk of contact tack welding.
Mechanical data
Enclosure Sealed relay is suitable for immersion cleaning of PCB assembly or conformal coating.
Sealed Please refer to the Application Recommendations in this catalog.
Operating voltage range
Does not take into account
the temperature rise due to
the contact current
E = pre-energization
Operating conditions
Temperature range, storage -40 C to 155 C
Test Relevant standard Testing as per Dimension Comments
Climatic cycling with condensation
1)
EN ISO 6988 20 cycles Storage 8/16 h
Temperature cycling
1)
IEC 68-2-14 Na 20 cycles 40/+ 85 C (dwell time 1 h)
Damp heat
1)
constant IEC 68-2-3 Ca 56 days Upper air temperature 55 C
Corrosive gas
1)
IEC 68-2-42 10 days
IEC 68-2-43 10 days
Vibration resistance IEC 68-2-6 (sine pulse form) 10 200 Hz No change in the
acceleration, acc. to position 23 35 g switching state > 10 s
Shock resistance IEC 68-2-27 (half-sine pulse form) 4 6 ms No change in the
acceleration 23 280 g switching state > 10 s
Solderability IEC 68-2-20 Ta, Method 1 Aging 3 (4 h/155 C)
Dewetting
Resistance to soldering heat IEC 68-2-20 Tb, Method 1A 10 s 1 s
with thermal screen
Sealing
1)
IEC 68-2-17 Qc, Method 2 1 min / 70 C
Flammability UL94-HB
1)
only sealed version
PCB relays
Single relays
Mini power relay K (open and sealed)
Please observe the disclaimer.
105
Catalog 1308028
Issued 01-05
Ordering information
Coil versions
Standard delivery packs (orders in multiples of delivery pack)
Mini K open: 600 pieces
Mini K sealed: 504 pieces
Coil Rated coil Coil resistance Must Must Allowable overdrive
1)
data for voltage + / - 10% operate voltage release voltage voltage (V)
Mini K (V) () (V) (V) at 23 C at 85 C
Open and sealed V23072-**061-**** 12 130 6.9 1.2 19.2 14.9
V23072-**062-**** 24 520 14.1 2.4 38.4 29.8
1)
Allowable overdrive is stated with no load applied and minimum coil resistance.
Part numbers
(see table below for coil data) Contact Contact Enclosure Terminals
Relay part number Tyco order number arrangement material
V23072-A1061-A303 3-1393272-2 Form C AgNi0.15 Open Printed circuit
V23072-A1062-A303 5-1393272-2 Form C AgNi0.15 Open Printed circuit
V23072-A1061-A308 3-1393272-6 Form U, X AgNi0.15 Open Printed circuit
V23072-A1062-A308 5-1393272-3 Form U, X AgNi0.15 Open Printed circuit
V23072-C1061-A302 4-1393273-9 Form A AgNi0.15 Sealed Printed circuit
V23072-C1062-A302 7-1393273-6 Form A AgNi0.15 Sealed Printed circuit
V23072-C1061-A303 5-1393273-0 Form C AgNi0.15 Sealed Printed circuit
V23072-C1062-A303 7-1393273-8 Form C AgNi0.15 Sealed Printed circuit
V23072-C1061-A308 6-1393273-0 Form U, X AgNi0.15 Sealed Printed circuit
V23072-C1062-A308 8-1393273-2 Form U, X AgNi0.15 Sealed Printed circuit
V23072-C1061-A402 2-1416001-0 Form A AgSnO2 Sealed Printed circuit
V23072-C1061-A408 1-1416001-4 Form U, X AgSnO2 Sealed Printed circuit